drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7414
  72         tristate "Analog Devices AD7414"
  73         depends on I2C && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7414 temperature monitoring chip.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7414.
  80
  81 config SENSORS_AD7418
  82         tristate "Analog Devices AD7416, AD7417 and AD7418"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7416, AD7417 and AD7418 temperature monitoring chips.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7418.
  90
  91 config SENSORS_ADCXX
  92         tristate "National Semiconductor ADCxxxSxxx"
  93         depends on SPI_MASTER && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the National Semiconductor
  96           ADC<bb><c>S<sss> chip family, where
  97           * bb  is the resolution in number of bits (8, 10, 12)
  98           * c   is the number of channels (1, 2, 4, 8)
  99           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 100             kSPS and 101 for 1 MSPS)
 101
 102           Examples : ADC081S101, ADC124S501, ...
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called adcxx.
 106
 107 config SENSORS_ADM1021
 108         tristate "Analog Devices ADM1021 and compatibles"
 109         depends on I2C
 110         help
 111           If you say yes here you get support for Analog Devices ADM1021
 112           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 113           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 114
 115           This driver can also be built as a module.  If so, the module
 116           will be called adm1021.
 117
 118 config SENSORS_ADM1025
 119         tristate "Analog Devices ADM1025 and compatibles"
 120         depends on I2C
 121         select HWMON_VID
 122         help
 123           If you say yes here you get support for Analog Devices ADM1025
 124           and Philips NE1619 sensor chips.
 125
 126           This driver can also be built as a module.  If so, the module
 127           will be called adm1025.
 128
 129 config SENSORS_ADM1026
 130         tristate "Analog Devices ADM1026 and compatibles"
 131         depends on I2C
 132         select HWMON_VID
 133         help
 134           If you say yes here you get support for Analog Devices ADM1026
 135           sensor chip.
 136
 137           This driver can also be built as a module.  If so, the module
 138           will be called adm1026.
 139
 140 config SENSORS_ADM1029
 141         tristate "Analog Devices ADM1029"
 142         depends on I2C
 143         help
 144           If you say yes here you get support for Analog Devices ADM1029
 145           sensor chip.
 146           Very rare chip, please let us know you use it.
 147
 148           This driver can also be built as a module.  If so, the module
 149           will be called adm1029.
 150
 151 config SENSORS_ADM1031
 152         tristate "Analog Devices ADM1031 and compatibles"
 153         depends on I2C
 154         help
 155           If you say yes here you get support for Analog Devices ADM1031
 156           and ADM1030 sensor chips.
 157
 158           This driver can also be built as a module.  If so, the module
 159           will be called adm1031.
 160
 161 config SENSORS_ADM9240
 162         tristate "Analog Devices ADM9240 and compatibles"
 163         depends on I2C
 164         select HWMON_VID
 165         help
 166           If you say yes here you get support for Analog Devices ADM9240,
 167           Dallas DS1780, National Semiconductor LM81 sensor chips.
 168
 169           This driver can also be built as a module.  If so, the module
 170           will be called adm9240.
 171
 172 config SENSORS_ADT7411
 173         tristate "Analog Devices ADT7411"
 174         depends on I2C && EXPERIMENTAL
 175         help
 176           If you say yes here you get support for the Analog Devices
 177           ADT7411 voltage and temperature monitoring chip.
 178
 179           This driver can also be built as a module. If so, the module
 180           will be called adt7411.
 181
 182 config SENSORS_ADT7462
 183         tristate "Analog Devices ADT7462"
 184         depends on I2C && EXPERIMENTAL
 185         help
 186           If you say yes here you get support for the Analog Devices
 187           ADT7462 temperature monitoring chips.
 188
 189           This driver can also be built as a module. If so, the module
 190           will be called adt7462.
 191
 192 config SENSORS_ADT7470
 193         tristate "Analog Devices ADT7470"
 194         depends on I2C && EXPERIMENTAL
 195         help
 196           If you say yes here you get support for the Analog Devices
 197           ADT7470 temperature monitoring chips.
 198
 199           This driver can also be built as a module. If so, the module
 200           will be called adt7470.
 201
 202 config SENSORS_ADT7475
 203         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 204         depends on I2C
 205         select HWMON_VID
 206         help
 207           If you say yes here you get support for the Analog Devices
 208           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 209           chips.
 210
 211           This driver can also be build as a module.  If so, the module
 212           will be called adt7475.
 213
 214 config SENSORS_ASC7621
 215         tristate "Andigilog aSC7621"
 216         depends on HWMON && I2C
 217         help
 218           If you say yes here you get support for the aSC7621
 219           family of SMBus sensors chip found on most Intel X38, X48, X58,
 220           945, 965 and 975 desktop boards.  Currently supported chips:
 221           aSC7621
 222           aSC7621a
 223
 224           This driver can also be built as a module.  If so, the module
 225           will be called asc7621.
 226
 227 config SENSORS_K8TEMP
 228         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 229         depends on X86 && PCI && EXPERIMENTAL
 230         help
 231           If you say yes here you get support for the temperature
 232           sensor(s) inside your CPU. Supported is whole AMD K8
 233           microarchitecture. Please note that you will need at least
 234           lm-sensors 2.10.1 for proper userspace support.
 235
 236           This driver can also be built as a module.  If so, the module
 237           will be called k8temp.
 238
 239 config SENSORS_K10TEMP
 240         tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 241         depends on X86 && PCI
 242         help
 243           If you say yes here you get support for the temperature
 244           sensor(s) inside your CPU. Supported are later revisions of
 245           the AMD Family 10h and all revisions of the AMD Family 11h,
 246           12h (Llano), and 14h (Brazos) microarchitectures.
 247
 248           This driver can also be built as a module.  If so, the module
 249           will be called k10temp.
 250
 251 config SENSORS_ASB100
 252         tristate "Asus ASB100 Bach"
 253         depends on X86 && I2C && EXPERIMENTAL
 254         select HWMON_VID
 255         help
 256           If you say yes here you get support for the ASB100 Bach sensor
 257           chip found on some Asus mainboards.
 258
 259           This driver can also be built as a module.  If so, the module
 260           will be called asb100.
 261
 262 config SENSORS_ATXP1
 263         tristate "Attansic ATXP1 VID controller"
 264         depends on I2C && EXPERIMENTAL
 265         select HWMON_VID
 266         help
 267           If you say yes here you get support for the Attansic ATXP1 VID
 268           controller.
 269
 270           If your board have such a chip, you are able to control your CPU
 271           core and other voltages.
 272
 273           This driver can also be built as a module.  If so, the module
 274           will be called atxp1.
 275
 276 config SENSORS_DS620
 277         tristate "Dallas Semiconductor DS620"
 278         depends on I2C
 279         help
 280           If you say yes here you get support for Dallas Semiconductor
 281           DS620 sensor chip.
 282
 283           This driver can also be built as a module.  If so, the module
 284           will be called ds620.
 285
 286 config SENSORS_DS1621
 287         tristate "Dallas Semiconductor DS1621 and DS1625"
 288         depends on I2C
 289         help
 290           If you say yes here you get support for Dallas Semiconductor
 291           DS1621 and DS1625 sensor chips.
 292
 293           This driver can also be built as a module.  If so, the module
 294           will be called ds1621.
 295
 296 config SENSORS_I5K_AMB
 297         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 298         depends on PCI && EXPERIMENTAL
 299         help
 300           If you say yes here you get support for FB-DIMM AMB temperature
 301           monitoring chips on systems with the Intel 5000 series chipset.
 302
 303           This driver can also be built as a module. If so, the module
 304           will be called i5k_amb.
 305
 306 config SENSORS_F71805F
 307         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 308         help
 309           If you say yes here you get support for hardware monitoring
 310           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 311           Super-I/O chips.
 312
 313           This driver can also be built as a module.  If so, the module
 314           will be called f71805f.
 315
 316 config SENSORS_F71882FG
 317         tristate "Fintek F71882FG and compatibles"
 318         help
 319           If you say yes here you get support for hardware monitoring
 320           features of many Fintek Super-I/O (LPC) chips. The currently
 321           supported chips are:
 322             F71808E
 323             F71858FG
 324             F71862FG
 325             F71863FG
 326             F71869F/E
 327             F71882FG
 328             F71883FG
 329             F71889FG/ED/A
 330             F8000
 331             F81801U
 332             F81865F
 333
 334           This driver can also be built as a module.  If so, the module
 335           will be called f71882fg.
 336
 337 config SENSORS_F75375S
 338         tristate "Fintek F75375S/SP and F75373"
 339         depends on I2C
 340         help
 341           If you say yes here you get support for hardware monitoring
 342           features of the Fintek F75375S/SP and F75373
 343
 344           This driver can also be built as a module.  If so, the module
 345           will be called f75375s.
 346
 347 config SENSORS_FSCHMD
 348         tristate "Fujitsu Siemens Computers sensor chips"
 349         depends on X86 && I2C
 350         help
 351           If you say yes here you get support for the following Fujitsu
 352           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 353           Heimdall, Heracles, Hades and Syleus including support for the
 354           integrated watchdog.
 355
 356           This is a merged driver for FSC sensor chips replacing the fscpos,
 357           fscscy and fscher drivers and adding support for several other FSC
 358           sensor chips.
 359
 360           This driver can also be built as a module.  If so, the module
 361           will be called fschmd.
 362
 363 config SENSORS_G760A
 364         tristate "GMT G760A"
 365         depends on I2C
 366         help
 367           If you say yes here you get support for Global Mixed-mode
 368           Technology Inc G760A fan speed PWM controller chips.
 369
 370           This driver can also be built as a module.  If so, the module
 371           will be called g760a.
 372
 373 config SENSORS_GL518SM
 374         tristate "Genesys Logic GL518SM"
 375         depends on I2C
 376         help
 377           If you say yes here you get support for Genesys Logic GL518SM
 378           sensor chips.
 379
 380           This driver can also be built as a module.  If so, the module
 381           will be called gl518sm.
 382
 383 config SENSORS_GL520SM
 384         tristate "Genesys Logic GL520SM"
 385         depends on I2C
 386         select HWMON_VID
 387         help
 388           If you say yes here you get support for Genesys Logic GL520SM
 389           sensor chips.
 390
 391           This driver can also be built as a module.  If so, the module
 392           will be called gl520sm.
 393
 394 config SENSORS_GPIO_FAN
 395         tristate "GPIO fan"
 396         depends on GENERIC_GPIO
 397         help
 398           If you say yes here you get support for fans connected to GPIO lines.
 399
 400           This driver can also be built as a module.  If so, the module
 401           will be called gpio-fan.
 402
 403 config SENSORS_CORETEMP
 404         tristate "Intel Core/Core2/Atom temperature sensor"
 405         depends on X86 && PCI && EXPERIMENTAL
 406         help
 407           If you say yes here you get support for the temperature
 408           sensor inside your CPU. Most of the family 6 CPUs
 409           are supported. Check Documentation/hwmon/coretemp for details.
 410
 411 config SENSORS_PKGTEMP
 412         tristate "Intel processor package temperature sensor"
 413         depends on X86 && EXPERIMENTAL
 414         help
 415           If you say yes here you get support for the package level temperature
 416           sensor inside your CPU. Check documentation/driver for details.
 417
 418 config SENSORS_IBMAEM
 419         tristate "IBM Active Energy Manager temperature/power sensors and control"
 420         select IPMI_SI
 421         depends on IPMI_HANDLER
 422         help
 423           If you say yes here you get support for the temperature and
 424           power sensors and capping hardware in various IBM System X
 425           servers that support Active Energy Manager.  This includes
 426           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 427           and certain HC10/HS2x/LS2x/QS2x blades.
 428
 429           This driver can also be built as a module.  If so, the module
 430           will be called ibmaem.
 431
 432 config SENSORS_IBMPEX
 433         tristate "IBM PowerExecutive temperature/power sensors"
 434         select IPMI_SI
 435         depends on IPMI_HANDLER
 436         help
 437           If you say yes here you get support for the temperature and
 438           power sensors in various IBM System X servers that support
 439           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 440           x3655, and x3755; the x3800, x3850, and x3950 models that have
 441           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 442
 443           This driver can also be built as a module.  If so, the module
 444           will be called ibmpex.
 445
 446 config SENSORS_IT87
 447         tristate "ITE IT87xx and compatibles"
 448         select HWMON_VID
 449         help
 450           If you say yes here you get support for ITE IT8705F, IT8712F,
 451           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
 452           chips, and the SiS960 clone.
 453
 454           This driver can also be built as a module.  If so, the module
 455           will be called it87.
 456
 457 config SENSORS_JZ4740
 458         tristate "Ingenic JZ4740 SoC ADC driver"
 459         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 460         help
 461           If you say yes here you get support for reading adc values from the ADCIN
 462           pin on Ingenic JZ4740 SoC based boards.
 463
 464           This driver can also be build as a module. If so, the module will be
 465           called jz4740-hwmon.
 466
 467 config SENSORS_JC42
 468         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 469         depends on I2C
 470         help
 471           If you say yes here, you get support for JEDEC JC42.4 compliant
 472           temperature sensors, which are used on many DDR3 memory modules for
 473           mobile devices and servers.  Support will include, but not be limited
 474           to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
 475           MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 476
 477           This driver can also be built as a module.  If so, the module
 478           will be called jc42.
 479
 480 config SENSORS_LINEAGE
 481         tristate "Lineage Compact Power Line Power Entry Module"
 482         depends on I2C && EXPERIMENTAL
 483         help
 484           If you say yes here you get support for the Lineage Compact Power Line
 485           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 486           CP2000DC, CP2725, and others.
 487
 488           This driver can also be built as a module.  If so, the module
 489           will be called lineage-pem.
 490
 491 config SENSORS_LM63
 492         tristate "National Semiconductor LM63 and LM64"
 493         depends on I2C
 494         help
 495           If you say yes here you get support for the National
 496           Semiconductor LM63 and LM64 remote diode digital temperature
 497           sensors with integrated fan control.  Such chips are found
 498           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 499           others.
 500
 501           This driver can also be built as a module.  If so, the module
 502           will be called lm63.
 503
 504 config SENSORS_LM70
 505         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 506         depends on SPI_MASTER
 507         help
 508           If you say yes here you get support for the National Semiconductor
 509           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 510           sensor chips.
 511
 512           This driver can also be built as a module.  If so, the module
 513           will be called lm70.
 514
 515 config SENSORS_LM73
 516         tristate "National Semiconductor LM73"
 517         depends on I2C
 518         help
 519           If you say yes here you get support for National Semiconductor LM73
 520           sensor chips.
 521           This driver can also be built as a module.  If so, the module
 522           will be called lm73.
 523
 524 config SENSORS_LM75
 525         tristate "National Semiconductor LM75 and compatibles"
 526         depends on I2C
 527         help
 528           If you say yes here you get support for one common type of
 529           temperature sensor chip, with models including:
 530
 531                 - Dallas Semiconductor DS75 and DS1775
 532                 - Maxim MAX6625 and MAX6626
 533                 - Microchip MCP980x
 534                 - National Semiconductor LM75, LM75A
 535                 - NXP's LM75A
 536                 - ST Microelectronics STDS75
 537                 - TelCom (now Microchip) TCN75
 538                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 539                   TMP275
 540
 541           This driver supports driver model based binding through board
 542           specific I2C device tables.
 543
 544           It also supports the "legacy" style of driver binding.  To use
 545           that with some chips which don't replicate LM75 quirks exactly,
 546           you may need the "force" module parameter.
 547
 548           This driver can also be built as a module.  If so, the module
 549           will be called lm75.
 550
 551 config SENSORS_LM77
 552         tristate "National Semiconductor LM77"
 553         depends on I2C
 554         help
 555           If you say yes here you get support for National Semiconductor LM77
 556           sensor chips.
 557
 558           This driver can also be built as a module.  If so, the module
 559           will be called lm77.
 560
 561 config SENSORS_LM78
 562         tristate "National Semiconductor LM78 and compatibles"
 563         depends on I2C
 564         select HWMON_VID
 565         help
 566           If you say yes here you get support for National Semiconductor LM78,
 567           LM78-J and LM79.
 568
 569           This driver can also be built as a module.  If so, the module
 570           will be called lm78.
 571
 572 config SENSORS_LM80
 573         tristate "National Semiconductor LM80"
 574         depends on I2C
 575         help
 576           If you say yes here you get support for National Semiconductor
 577           LM80 sensor chips.
 578
 579           This driver can also be built as a module.  If so, the module
 580           will be called lm80.
 581
 582 config SENSORS_LM83
 583         tristate "National Semiconductor LM83 and compatibles"
 584         depends on I2C
 585         help
 586           If you say yes here you get support for National Semiconductor
 587           LM82 and LM83 sensor chips.
 588
 589           This driver can also be built as a module.  If so, the module
 590           will be called lm83.
 591
 592 config SENSORS_LM85
 593         tristate "National Semiconductor LM85 and compatibles"
 594         depends on I2C
 595         select HWMON_VID
 596         help
 597           If you say yes here you get support for National Semiconductor LM85
 598           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 599           EMC6D101, EMC6D102, and EMC6D103.
 600
 601           This driver can also be built as a module.  If so, the module
 602           will be called lm85.
 603
 604 config SENSORS_LM87
 605         tristate "National Semiconductor LM87 and compatibles"
 606         depends on I2C
 607         select HWMON_VID
 608         help
 609           If you say yes here you get support for National Semiconductor LM87
 610           and Analog Devices ADM1024 sensor chips.
 611
 612           This driver can also be built as a module.  If so, the module
 613           will be called lm87.
 614
 615 config SENSORS_LM90
 616         tristate "National Semiconductor LM90 and compatibles"
 617         depends on I2C
 618         help
 619           If you say yes here you get support for National Semiconductor LM90,
 620           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 621           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 622           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 623           and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
 624
 625           This driver can also be built as a module.  If so, the module
 626           will be called lm90.
 627
 628 config SENSORS_LM92
 629         tristate "National Semiconductor LM92 and compatibles"
 630         depends on I2C
 631         help
 632           If you say yes here you get support for National Semiconductor LM92
 633           and Maxim MAX6635 sensor chips.
 634
 635           This driver can also be built as a module.  If so, the module
 636           will be called lm92.
 637
 638 config SENSORS_LM93
 639         tristate "National Semiconductor LM93 and compatibles"
 640         depends on I2C
 641         select HWMON_VID
 642         help
 643           If you say yes here you get support for National Semiconductor LM93,
 644           LM94, and compatible sensor chips.
 645
 646           This driver can also be built as a module.  If so, the module
 647           will be called lm93.
 648
 649 config SENSORS_LTC4151
 650         tristate "Linear Technology LTC4151"
 651         depends on I2C
 652         default n
 653         help
 654           If you say yes here you get support for Linear Technology LTC4151
 655           High Voltage I2C Current and Voltage Monitor interface.
 656
 657           This driver can also be built as a module. If so, the module will
 658           be called ltc4151.
 659
 660 config SENSORS_LTC4215
 661         tristate "Linear Technology LTC4215"
 662         depends on I2C && EXPERIMENTAL
 663         default n
 664         help
 665           If you say yes here you get support for Linear Technology LTC4215
 666           Hot Swap Controller I2C interface.
 667
 668           This driver can also be built as a module. If so, the module will
 669           be called ltc4215.
 670
 671 config SENSORS_LTC4245
 672         tristate "Linear Technology LTC4245"
 673         depends on I2C && EXPERIMENTAL
 674         default n
 675         help
 676           If you say yes here you get support for Linear Technology LTC4245
 677           Multiple Supply Hot Swap Controller I2C interface.
 678
 679           This driver can also be built as a module. If so, the module will
 680           be called ltc4245.
 681
 682 config SENSORS_LTC4261
 683         tristate "Linear Technology LTC4261"
 684         depends on I2C && EXPERIMENTAL
 685         default n
 686         help
 687           If you say yes here you get support for Linear Technology LTC4261
 688           Negative Voltage Hot Swap Controller I2C interface.
 689
 690           This driver can also be built as a module. If so, the module will
 691           be called ltc4261.
 692
 693 config SENSORS_LM95241
 694         tristate "National Semiconductor LM95241 sensor chip"
 695         depends on I2C
 696         help
 697           If you say yes here you get support for LM95241 sensor chip.
 698
 699           This driver can also be built as a module.  If so, the module
 700           will be called lm95241.
 701
 702 config SENSORS_MAX1111
 703         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 704         depends on SPI_MASTER
 705         help
 706           Say y here to support Maxim's MAX1111 ADC chips.
 707
 708           This driver can also be built as a module.  If so, the module
 709           will be called max1111.
 710
 711 config SENSORS_MAX16065
 712         tristate "Maxim MAX16065 System Manager and compatibles"
 713         depends on I2C
 714         help
 715           If you say yes here you get support for hardware monitoring
 716           capabilities of the following Maxim System Manager chips.
 717             MAX16065
 718             MAX16066
 719             MAX16067
 720             MAX16068
 721             MAX16070
 722             MAX16071
 723
 724           This driver can also be built as a module.  If so, the module
 725           will be called max16065.
 726
 727 config SENSORS_MAX1619
 728         tristate "Maxim MAX1619 sensor chip"
 729         depends on I2C
 730         help
 731           If you say yes here you get support for MAX1619 sensor chip.
 732
 733           This driver can also be built as a module.  If so, the module
 734           will be called max1619.
 735
 736 config SENSORS_MAX6639
 737         tristate "Maxim MAX6639 sensor chip"
 738         depends on I2C && EXPERIMENTAL
 739         help
 740           If you say yes here you get support for the MAX6639
 741           sensor chips.
 742
 743           This driver can also be built as a module.  If so, the module
 744           will be called max6639.
 745
 746 config SENSORS_MAX6642
 747         tristate "Maxim MAX6642 sensor chip"
 748         depends on I2C && EXPERIMENTAL
 749         help
 750           If you say yes here you get support for MAX6642 sensor chip.
 751           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 752           with Overtemperature Alarm from Maxim.
 753
 754           This driver can also be built as a module.  If so, the module
 755           will be called max6642.
 756
 757 config SENSORS_MAX6650
 758         tristate "Maxim MAX6650 sensor chip"
 759         depends on I2C && EXPERIMENTAL
 760         help
 761           If you say yes here you get support for the MAX6650 / MAX6651
 762           sensor chips.
 763
 764           This driver can also be built as a module.  If so, the module
 765           will be called max6650.
 766
 767 config SENSORS_PC87360
 768         tristate "National Semiconductor PC87360 family"
 769         select HWMON_VID
 770         help
 771           If you say yes here you get access to the hardware monitoring
 772           functions of the National Semiconductor PC8736x Super-I/O chips.
 773           The PC87360, PC87363 and PC87364 only have fan monitoring and
 774           control.  The PC87365 and PC87366 additionally have voltage and
 775           temperature monitoring.
 776
 777           This driver can also be built as a module.  If so, the module
 778           will be called pc87360.
 779
 780 config SENSORS_PC87427
 781         tristate "National Semiconductor PC87427"
 782         help
 783           If you say yes here you get access to the hardware monitoring
 784           functions of the National Semiconductor PC87427 Super-I/O chip.
 785           The chip has two distinct logical devices, one for fan speed
 786           monitoring and control, and one for voltage and temperature
 787           monitoring. Fan speed monitoring and control are supported, as
 788           well as temperature monitoring. Voltages aren't supported yet.
 789
 790           This driver can also be built as a module.  If so, the module
 791           will be called pc87427.
 792
 793 config SENSORS_PCF8591
 794         tristate "Philips PCF8591 ADC/DAC"
 795         depends on I2C
 796         default n
 797         help
 798           If you say yes here you get support for Philips PCF8591 4-channel
 799           ADC, 1-channel DAC chips.
 800
 801           This driver can also be built as a module.  If so, the module
 802           will be called pcf8591.
 803
 804           These devices are hard to detect and rarely found on mainstream
 805           hardware.  If unsure, say N.
 806
 807 config PMBUS
 808         tristate "PMBus support"
 809         depends on I2C && EXPERIMENTAL
 810         default n
 811         help
 812           Say yes here if you want to enable PMBus support.
 813
 814           This driver can also be built as a module. If so, the module will
 815           be called pmbus_core.
 816
 817 if PMBUS
 818
 819 config SENSORS_PMBUS
 820         tristate "Generic PMBus devices"
 821         default n
 822         help
 823           If you say yes here you get hardware monitoring support for generic
 824           PMBus devices, including but not limited to BMR450, BMR451, BMR453,
 825           BMR454, and LTC2978.
 826
 827           This driver can also be built as a module. If so, the module will
 828           be called pmbus.
 829
 830 config SENSORS_MAX16064
 831         tristate "Maxim MAX16064"
 832         default n
 833         help
 834           If you say yes here you get hardware monitoring support for Maxim
 835           MAX16064.
 836
 837           This driver can also be built as a module. If so, the module will
 838           be called max16064.
 839
 840 config SENSORS_MAX34440
 841         tristate "Maxim MAX34440/MAX34441"
 842         default n
 843         help
 844           If you say yes here you get hardware monitoring support for Maxim
 845           MAX34440 and MAX34441.
 846
 847           This driver can also be built as a module. If so, the module will
 848           be called max34440.
 849
 850 config SENSORS_MAX8688
 851         tristate "Maxim MAX8688"
 852         default n
 853         help
 854           If you say yes here you get hardware monitoring support for Maxim
 855           MAX8688.
 856
 857           This driver can also be built as a module. If so, the module will
 858           be called max8688.
 859
 860 config SENSORS_UCD9000
 861         tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
 862         default n
 863         help
 864           If you say yes here you get hardware monitoring support for TI
 865           UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
 866           Controllers.
 867
 868           This driver can also be built as a module. If so, the module will
 869           be called ucd9000.
 870
 871 config SENSORS_UCD9200
 872         tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
 873         default n
 874         help
 875           If you say yes here you get hardware monitoring support for TI
 876           UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
 877           Digital PWM System Controllers.
 878
 879           This driver can also be built as a module. If so, the module will
 880           be called ucd9200.
 881
 882 endif # PMBUS
 883
 884 config SENSORS_SHT15
 885         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 886         depends on GENERIC_GPIO
 887         help
 888           If you say yes here you get support for the Sensiron SHT10, SHT11,
 889           SHT15, SHT71, SHT75 humidity and temperature sensors.
 890
 891           This driver can also be built as a module.  If so, the module
 892           will be called sht15.
 893
 894 config SENSORS_SHT21
 895         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 896         depends on I2C
 897         help
 898           If you say yes here you get support for the Sensiron SHT21, SHT25
 899           humidity and temperature sensors.
 900
 901           This driver can also be built as a module.  If so, the module
 902           will be called sht21.
 903
 904 config SENSORS_S3C
 905         tristate "Samsung built-in ADC"
 906         depends on S3C_ADC
 907         help
 908           If you say yes here you get support for the on-board ADCs of
 909           the Samsung S3C24XX, S3C64XX and other series of SoC
 910
 911           This driver can also be built as a module. If so, the module
 912           will be called s3c-hwmon.
 913
 914 config SENSORS_S3C_RAW
 915         bool "Include raw channel attributes in sysfs"
 916         depends on SENSORS_S3C
 917         help
 918           Say Y here if you want to include raw copies of all the ADC
 919           channels in sysfs.
 920
 921 config SENSORS_SIS5595
 922         tristate "Silicon Integrated Systems Corp. SiS5595"
 923         depends on PCI
 924         help
 925           If you say yes here you get support for the integrated sensors in
 926           SiS5595 South Bridges.
 927
 928           This driver can also be built as a module.  If so, the module
 929           will be called sis5595.
 930
 931 config SENSORS_SMM665
 932         tristate "Summit Microelectronics SMM665"
 933         depends on I2C && EXPERIMENTAL
 934         default n
 935         help
 936           If you say yes here you get support for the hardware monitoring
 937           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 938           Active DC Output Controller / Monitor.
 939
 940           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 941           Support for those chips is untested.
 942
 943           This driver can also be built as a module. If so, the module will
 944           be called smm665.
 945
 946 config SENSORS_DME1737
 947         tristate "SMSC DME1737, SCH311x and compatibles"
 948         depends on I2C && EXPERIMENTAL
 949         select HWMON_VID
 950         help
 951           If you say yes here you get support for the hardware monitoring
 952           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 953           Asus A8000 Super-I/O chips.
 954
 955           This driver can also be built as a module.  If so, the module
 956           will be called dme1737.
 957
 958 config SENSORS_EMC1403
 959         tristate "SMSC EMC1403/23 thermal sensor"
 960         depends on I2C
 961         help
 962           If you say yes here you get support for the SMSC EMC1403/23
 963           temperature monitoring chip.
 964
 965           Threshold values can be configured using sysfs.
 966           Data from the different diodes are accessible via sysfs.
 967
 968 config SENSORS_EMC2103
 969         tristate "SMSC EMC2103"
 970         depends on I2C
 971         help
 972           If you say yes here you get support for the temperature
 973           and fan sensors of the SMSC EMC2103 chips.
 974
 975           This driver can also be built as a module.  If so, the module
 976           will be called emc2103.
 977
 978 config SENSORS_SMSC47M1
 979         tristate "SMSC LPC47M10x and compatibles"
 980         help
 981           If you say yes here you get support for the integrated fan
 982           monitoring and control capabilities of the SMSC LPC47B27x,
 983           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 984           LPC47M192, LPC47M292 and LPC47M997 chips.
 985
 986           The temperature and voltage sensor features of the LPC47M15x,
 987           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 988           driver, select also "SMSC LPC47M192 and compatibles" below for
 989           those.
 990
 991           This driver can also be built as a module.  If so, the module
 992           will be called smsc47m1.
 993
 994 config SENSORS_SMSC47M192
 995         tristate "SMSC LPC47M192 and compatibles"
 996         depends on I2C
 997         select HWMON_VID
 998         help
 999           If you say yes here you get support for the temperature and
1000           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1001           and LPC47M997 chips.
1002
1003           The fan monitoring and control capabilities of these chips
1004           are supported by another driver, select
1005           "SMSC LPC47M10x and compatibles" above. You need both drivers
1006           if you want fan control and voltage/temperature sensor support.
1007
1008           This driver can also be built as a module.  If so, the module
1009           will be called smsc47m192.
1010
1011 config SENSORS_SMSC47B397
1012         tristate "SMSC LPC47B397-NC"
1013         depends on EXPERIMENTAL
1014         help
1015           If you say yes here you get support for the SMSC LPC47B397-NC
1016           sensor chip.
1017
1018           This driver can also be built as a module.  If so, the module
1019           will be called smsc47b397.
1020
1021 config SENSORS_SCH5627
1022         tristate "SMSC SCH5627"
1023         help
1024           If you say yes here you get support for the hardware monitoring
1025           features of the SMSC SCH5627 Super-I/O chip.
1026
1027           This driver can also be built as a module.  If so, the module
1028           will be called sch5627.
1029
1030 config SENSORS_ADS1015
1031         tristate "Texas Instruments ADS1015"
1032         depends on I2C
1033         help
1034           If you say yes here you get support for Texas Instruments ADS1015
1035           12-bit 4-input ADC device.
1036
1037           This driver can also be built as a module.  If so, the module
1038           will be called ads1015.
1039
1040 config SENSORS_ADS7828
1041         tristate "Texas Instruments ADS7828"
1042         depends on I2C
1043         help
1044           If you say yes here you get support for Texas Instruments ADS7828
1045           12-bit 8-channel ADC device.
1046
1047           This driver can also be built as a module.  If so, the module
1048           will be called ads7828.
1049
1050 config SENSORS_ADS7871
1051         tristate "Texas Instruments ADS7871 A/D converter"
1052         depends on SPI
1053         help
1054           If you say yes here you get support for TI ADS7871 & ADS7870
1055
1056           This driver can also be built as a module.  If so, the module
1057           will be called ads7871.
1058
1059 config SENSORS_AMC6821
1060         tristate "Texas Instruments AMC6821"
1061         depends on I2C  && EXPERIMENTAL
1062         help
1063           If you say yes here you get support for the Texas Instruments
1064           AMC6821 hardware monitoring chips.
1065
1066           This driver can also be build as a module.  If so, the module
1067           will be called amc6821.
1068
1069 config SENSORS_THMC50
1070         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1071         depends on I2C
1072         help
1073           If you say yes here you get support for Texas Instruments THMC50
1074           sensor chips and clones: the Analog Devices ADM1022.
1075
1076           This driver can also be built as a module.  If so, the module
1077           will be called thmc50.
1078
1079 config SENSORS_TMP102
1080         tristate "Texas Instruments TMP102"
1081         depends on I2C && EXPERIMENTAL
1082         help
1083           If you say yes here you get support for Texas Instruments TMP102
1084           sensor chips.
1085
1086           This driver can also be built as a module.  If so, the module
1087           will be called tmp102.
1088
1089 config SENSORS_TMP401
1090         tristate "Texas Instruments TMP401 and compatibles"
1091         depends on I2C && EXPERIMENTAL
1092         help
1093           If you say yes here you get support for Texas Instruments TMP401 and
1094           TMP411 temperature sensor chips.
1095
1096           This driver can also be built as a module.  If so, the module
1097           will be called tmp401.
1098
1099 config SENSORS_TMP421
1100         tristate "Texas Instruments TMP421 and compatible"
1101         depends on I2C && EXPERIMENTAL
1102         help
1103           If you say yes here you get support for Texas Instruments TMP421,
1104           TMP422 and TMP423 temperature sensor chips.
1105
1106           This driver can also be built as a module.  If so, the module
1107           will be called tmp421.
1108
1109 config SENSORS_TWL4030_MADC
1110         tristate "Texas Instruments TWL4030 MADC Hwmon"
1111         depends on TWL4030_MADC
1112         help
1113         If you say yes here you get hwmon support for triton
1114         TWL4030-MADC.
1115
1116         This driver can also be built as a module. If so it will be called
1117         twl4030-madc-hwmon.
1118
1119 config SENSORS_VIA_CPUTEMP
1120         tristate "VIA CPU temperature sensor"
1121         depends on X86
1122         help
1123           If you say yes here you get support for the temperature
1124           sensor inside your CPU. Supported are all known variants of
1125           the VIA C7 and Nano.
1126
1127 config SENSORS_VIA686A
1128         tristate "VIA686A"
1129         depends on PCI
1130         help
1131           If you say yes here you get support for the integrated sensors in
1132           Via 686A/B South Bridges.
1133
1134           This driver can also be built as a module.  If so, the module
1135           will be called via686a.
1136
1137 config SENSORS_VT1211
1138         tristate "VIA VT1211"
1139         select HWMON_VID
1140         help
1141           If you say yes here then you get support for hardware monitoring
1142           features of the VIA VT1211 Super-I/O chip.
1143
1144           This driver can also be built as a module.  If so, the module
1145           will be called vt1211.
1146
1147 config SENSORS_VT8231
1148         tristate "VIA VT8231"
1149         depends on PCI
1150         select HWMON_VID
1151         help
1152           If you say yes here then you get support for the integrated sensors
1153           in the VIA VT8231 device.
1154
1155           This driver can also be built as a module.  If so, the module
1156           will be called vt8231.
1157
1158 config SENSORS_W83781D
1159         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1160         depends on I2C
1161         select HWMON_VID
1162         help
1163           If you say yes here you get support for the Winbond W8378x series
1164           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1165           Asus AS99127F.
1166
1167           This driver can also be built as a module.  If so, the module
1168           will be called w83781d.
1169
1170 config SENSORS_W83791D
1171         tristate "Winbond W83791D"
1172         depends on I2C
1173         select HWMON_VID
1174         help
1175           If you say yes here you get support for the Winbond W83791D chip.
1176
1177           This driver can also be built as a module.  If so, the module
1178           will be called w83791d.
1179
1180 config SENSORS_W83792D
1181         tristate "Winbond W83792D"
1182         depends on I2C
1183         help
1184           If you say yes here you get support for the Winbond W83792D chip.
1185
1186           This driver can also be built as a module.  If so, the module
1187           will be called w83792d.
1188
1189 config SENSORS_W83793
1190         tristate "Winbond W83793"
1191         depends on I2C && EXPERIMENTAL
1192         select HWMON_VID
1193         help
1194           If you say yes here you get support for the Winbond W83793
1195           hardware monitoring chip, including support for the integrated
1196           watchdog.
1197
1198           This driver can also be built as a module.  If so, the module
1199           will be called w83793.
1200
1201 config SENSORS_W83795
1202         tristate "Winbond/Nuvoton W83795G/ADG"
1203         depends on I2C && EXPERIMENTAL
1204         help
1205           If you say yes here you get support for the Winbond W83795G and
1206           W83795ADG hardware monitoring chip.
1207
1208           This driver can also be built as a module.  If so, the module
1209           will be called w83795.
1210
1211 config SENSORS_W83795_FANCTRL
1212         boolean "Include fan control support (DANGEROUS)"
1213         depends on SENSORS_W83795 && EXPERIMENTAL
1214         default n
1215         help
1216           If you say yes here, support for the both manual and automatic
1217           fan control features will be included in the driver.
1218
1219           This part of the code wasn't carefully reviewed and tested yet,
1220           so enabling this option is strongly discouraged on production
1221           servers. Only developers and testers should enable it for the
1222           time being.
1223
1224           Please also note that this option will create sysfs attribute
1225           files which may change in the future, so you shouldn't rely
1226           on them being stable.
1227
1228 config SENSORS_W83L785TS
1229         tristate "Winbond W83L785TS-S"
1230         depends on I2C && EXPERIMENTAL
1231         help
1232           If you say yes here you get support for the Winbond W83L785TS-S
1233           sensor chip, which is used on the Asus A7N8X, among other
1234           motherboards.
1235
1236           This driver can also be built as a module.  If so, the module
1237           will be called w83l785ts.
1238
1239 config SENSORS_W83L786NG
1240         tristate "Winbond W83L786NG, W83L786NR"
1241         depends on I2C && EXPERIMENTAL
1242         help
1243           If you say yes here you get support for the Winbond W83L786NG
1244           and W83L786NR sensor chips.
1245
1246           This driver can also be built as a module.  If so, the module
1247           will be called w83l786ng.
1248
1249 config SENSORS_W83627HF
1250         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1251         select HWMON_VID
1252         help
1253           If you say yes here you get support for the Winbond W836X7 series
1254           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1255           W83697HF.
1256
1257           This driver can also be built as a module.  If so, the module
1258           will be called w83627hf.
1259
1260 config SENSORS_W83627EHF
1261         tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
1262         select HWMON_VID
1263         help
1264           If you say yes here you get support for the hardware
1265           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1266
1267           This driver also supports the W83627EHG, which is the lead-free
1268           version of the W83627EHF, and the W83627DHG, which is a similar
1269           chip suited for specific Intel processors that use PECI such as
1270           the Core 2 Duo.
1271
1272           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1273           (also known as W83667HG-I), and NCT6776F.
1274
1275           This driver can also be built as a module.  If so, the module
1276           will be called w83627ehf.
1277
1278 config SENSORS_WM831X
1279         tristate "WM831x PMICs"
1280         depends on MFD_WM831X
1281         help
1282           If you say yes here you get support for the hardware
1283           monitoring functionality of the Wolfson Microelectronics
1284           WM831x series of PMICs.
1285
1286           This driver can also be built as a module.  If so, the module
1287           will be called wm831x-hwmon.
1288
1289 config SENSORS_WM8350
1290         tristate "Wolfson Microelectronics WM835x"
1291         depends on MFD_WM8350
1292         help
1293           If you say yes here you get support for the hardware
1294           monitoring features of the WM835x series of PMICs.
1295
1296           This driver can also be built as a module.  If so, the module
1297           will be called wm8350-hwmon.
1298
1299 config SENSORS_ULTRA45
1300         tristate "Sun Ultra45 PIC16F747"
1301         depends on SPARC64
1302         help
1303           This driver provides support for the Ultra45 workstation environmental
1304           sensors.
1305
1306 config SENSORS_APPLESMC
1307         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1308         depends on INPUT && X86
1309         select NEW_LEDS
1310         select LEDS_CLASS
1311         select INPUT_POLLDEV
1312         default n
1313         help
1314           This driver provides support for the Apple System Management
1315           Controller, which provides an accelerometer (Apple Sudden Motion
1316           Sensor), light sensors, temperature sensors, keyboard backlight
1317           control and fan control.
1318
1319           Only Intel-based Apple's computers are supported (MacBook Pro,
1320           MacBook, MacMini).
1321
1322           Data from the different sensors, keyboard backlight control and fan
1323           control are accessible via sysfs.
1324
1325           This driver also provides an absolute input class device, allowing
1326           the laptop to act as a pinball machine-esque joystick.
1327
1328           Say Y here if you have an applicable laptop and want to experience
1329           the awesome power of applesmc.
1330
1331 config SENSORS_MC13783_ADC
1332         tristate "Freescale MC13783 ADC"
1333         depends on MFD_MC13783
1334         help
1335           Support for the A/D converter on MC13783 PMIC.
1336
1337 if ACPI
1338
1339 comment "ACPI drivers"
1340
1341 config SENSORS_ATK0110
1342         tristate "ASUS ATK0110"
1343         depends on X86 && EXPERIMENTAL
1344         help
1345           If you say yes here you get support for the ACPI hardware
1346           monitoring interface found in many ASUS motherboards. This
1347           driver will provide readings of fans, voltages and temperatures
1348           through the system firmware.
1349
1350           This driver can also be built as a module. If so, the module
1351           will be called asus_atk0110.
1352
1353 endif # ACPI
1354
1355 endif # HWMON