drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7414
  72         tristate "Analog Devices AD7414"
  73         depends on I2C && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7414 temperature monitoring chip.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7414.
  80
  81 config SENSORS_AD7418
  82         tristate "Analog Devices AD7416, AD7417 and AD7418"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7416, AD7417 and AD7418 temperature monitoring chips.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7418.
  90
  91 config SENSORS_ADCXX
  92         tristate "National Semiconductor ADCxxxSxxx"
  93         depends on SPI_MASTER && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the National Semiconductor
  96           ADC<bb><c>S<sss> chip family, where
  97           * bb  is the resolution in number of bits (8, 10, 12)
  98           * c   is the number of channels (1, 2, 4, 8)
  99           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 100             kSPS and 101 for 1 MSPS)
 101
 102           Examples : ADC081S101, ADC124S501, ...
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called adcxx.
 106
 107 config SENSORS_ADM1021
 108         tristate "Analog Devices ADM1021 and compatibles"
 109         depends on I2C
 110         help
 111           If you say yes here you get support for Analog Devices ADM1021
 112           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 113           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
 114           and the XEON processor built-in sensor.
 115
 116           This driver can also be built as a module.  If so, the module
 117           will be called adm1021.
 118
 119 config SENSORS_ADM1025
 120         tristate "Analog Devices ADM1025 and compatibles"
 121         depends on I2C
 122         select HWMON_VID
 123         help
 124           If you say yes here you get support for Analog Devices ADM1025
 125           and Philips NE1619 sensor chips.
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adm1025.
 129
 130 config SENSORS_ADM1026
 131         tristate "Analog Devices ADM1026 and compatibles"
 132         depends on I2C && EXPERIMENTAL
 133         select HWMON_VID
 134         help
 135           If you say yes here you get support for Analog Devices ADM1026
 136           sensor chip.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1026.
 140
 141 config SENSORS_ADM1029
 142         tristate "Analog Devices ADM1029"
 143         depends on I2C && EXPERIMENTAL
 144         help
 145           If you say yes here you get support for Analog Devices ADM1029
 146           sensor chip.
 147           Very rare chip, please let us know you use it.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1029.
 151
 152 config SENSORS_ADM1031
 153         tristate "Analog Devices ADM1031 and compatibles"
 154         depends on I2C && EXPERIMENTAL
 155         help
 156           If you say yes here you get support for Analog Devices ADM1031
 157           and ADM1030 sensor chips.
 158
 159           This driver can also be built as a module.  If so, the module
 160           will be called adm1031.
 161
 162 config SENSORS_ADM9240
 163         tristate "Analog Devices ADM9240 and compatibles"
 164         depends on I2C
 165         select HWMON_VID
 166         help
 167           If you say yes here you get support for Analog Devices ADM9240,
 168           Dallas DS1780, National Semiconductor LM81 sensor chips.
 169
 170           This driver can also be built as a module.  If so, the module
 171           will be called adm9240.
 172
 173 config SENSORS_ADT7411
 174         tristate "Analog Devices ADT7411"
 175         depends on I2C && EXPERIMENTAL
 176         help
 177           If you say yes here you get support for the Analog Devices
 178           ADT7411 voltage and temperature monitoring chip.
 179
 180           This driver can also be built as a module. If so, the module
 181           will be called adt7411.
 182
 183 config SENSORS_ADT7462
 184         tristate "Analog Devices ADT7462"
 185         depends on I2C && EXPERIMENTAL
 186         help
 187           If you say yes here you get support for the Analog Devices
 188           ADT7462 temperature monitoring chips.
 189
 190           This driver can also be built as a module. If so, the module
 191           will be called adt7462.
 192
 193 config SENSORS_ADT7470
 194         tristate "Analog Devices ADT7470"
 195         depends on I2C && EXPERIMENTAL
 196         help
 197           If you say yes here you get support for the Analog Devices
 198           ADT7470 temperature monitoring chips.
 199
 200           This driver can also be built as a module. If so, the module
 201           will be called adt7470.
 202
 203 config SENSORS_ADT7475
 204         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 205         depends on I2C && EXPERIMENTAL
 206         select HWMON_VID
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 210           chips.
 211
 212           This driver can also be build as a module.  If so, the module
 213           will be called adt7475.
 214
 215 config SENSORS_ASC7621
 216         tristate "Andigilog aSC7621"
 217         depends on HWMON && I2C
 218         help
 219           If you say yes here you get support for the aSC7621
 220           family of SMBus sensors chip found on most Intel X38, X48, X58,
 221           945, 965 and 975 desktop boards.  Currently supported chips:
 222           aSC7621
 223           aSC7621a
 224
 225           This driver can also be built as a module.  If so, the module
 226           will be called asc7621.
 227
 228 config SENSORS_K8TEMP
 229         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 230         depends on X86 && PCI && EXPERIMENTAL
 231         help
 232           If you say yes here you get support for the temperature
 233           sensor(s) inside your CPU. Supported is whole AMD K8
 234           microarchitecture. Please note that you will need at least
 235           lm-sensors 2.10.1 for proper userspace support.
 236
 237           This driver can also be built as a module.  If so, the module
 238           will be called k8temp.
 239
 240 config SENSORS_K10TEMP
 241         tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
 242         depends on X86 && PCI
 243         help
 244           If you say yes here you get support for the temperature
 245           sensor(s) inside your CPU. Supported are later revisions of
 246           the AMD Family 10h and all revisions of the AMD Family 11h
 247           microarchitectures.
 248
 249           This driver can also be built as a module.  If so, the module
 250           will be called k10temp.
 251
 252 config SENSORS_AMS
 253         tristate "Apple Motion Sensor driver"
 254         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 255         select INPUT_POLLDEV
 256         help
 257           Support for the motion sensor included in PowerBooks. Includes
 258           implementations for PMU and I2C.
 259
 260           This driver can also be built as a module. If so, the module
 261           will be called ams.
 262
 263 config SENSORS_AMS_PMU
 264         bool "PMU variant"
 265         depends on SENSORS_AMS && ADB_PMU
 266         default y
 267         help
 268           PMU variant of motion sensor, found in late 2005 PowerBooks.
 269
 270 config SENSORS_AMS_I2C
 271         bool "I2C variant"
 272         depends on SENSORS_AMS && I2C
 273         default y
 274         help
 275           I2C variant of motion sensor, found in early 2005 PowerBooks and
 276           iBooks.
 277
 278 config SENSORS_ASB100
 279         tristate "Asus ASB100 Bach"
 280         depends on X86 && I2C && EXPERIMENTAL
 281         select HWMON_VID
 282         help
 283           If you say yes here you get support for the ASB100 Bach sensor
 284           chip found on some Asus mainboards.
 285
 286           This driver can also be built as a module.  If so, the module
 287           will be called asb100.
 288
 289 config SENSORS_ATXP1
 290         tristate "Attansic ATXP1 VID controller"
 291         depends on I2C && EXPERIMENTAL
 292         select HWMON_VID
 293         help
 294           If you say yes here you get support for the Attansic ATXP1 VID
 295           controller.
 296
 297           If your board have such a chip, you are able to control your CPU
 298           core and other voltages.
 299
 300           This driver can also be built as a module.  If so, the module
 301           will be called atxp1.
 302
 303 config SENSORS_DS1621
 304         tristate "Dallas Semiconductor DS1621 and DS1625"
 305         depends on I2C
 306         help
 307           If you say yes here you get support for Dallas Semiconductor
 308           DS1621 and DS1625 sensor chips.
 309
 310           This driver can also be built as a module.  If so, the module
 311           will be called ds1621.
 312
 313 config SENSORS_I5K_AMB
 314         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 315         depends on PCI && EXPERIMENTAL
 316         help
 317           If you say yes here you get support for FB-DIMM AMB temperature
 318           monitoring chips on systems with the Intel 5000 series chipset.
 319
 320           This driver can also be built as a module. If so, the module
 321           will be called i5k_amb.
 322
 323 config SENSORS_F71805F
 324         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 325         depends on EXPERIMENTAL
 326         help
 327           If you say yes here you get support for hardware monitoring
 328           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 329           Super-I/O chips.
 330
 331           This driver can also be built as a module.  If so, the module
 332           will be called f71805f.
 333
 334 config SENSORS_F71882FG
 335         tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
 336         depends on EXPERIMENTAL
 337         help
 338           If you say yes here you get support for hardware monitoring
 339           features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
 340           F71889FG and F8000 Super-I/O chips.
 341
 342           This driver can also be built as a module.  If so, the module
 343           will be called f71882fg.
 344
 345 config SENSORS_F75375S
 346         tristate "Fintek F75375S/SP and F75373";
 347         depends on I2C && EXPERIMENTAL
 348         help
 349           If you say yes here you get support for hardware monitoring
 350           features of the Fintek F75375S/SP and F75373
 351
 352           This driver can also be built as a module.  If so, the module
 353           will be called f75375s.
 354
 355 config SENSORS_FSCHMD
 356         tristate "Fujitsu Siemens Computers sensor chips"
 357         depends on X86 && I2C
 358         help
 359           If you say yes here you get support for the following Fujitsu
 360           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 361           Heimdall, Heracles, Hades and Syleus including support for the
 362           integrated watchdog.
 363
 364           This is a merged driver for FSC sensor chips replacing the fscpos,
 365           fscscy and fscher drivers and adding support for several other FSC
 366           sensor chips.
 367
 368           This driver can also be built as a module.  If so, the module
 369           will be called fschmd.
 370
 371 config SENSORS_G760A
 372         tristate "GMT G760A"
 373         depends on I2C
 374         help
 375           If you say yes here you get support for Global Mixed-mode
 376           Technology Inc G760A fan speed PWM controller chips.
 377
 378           This driver can also be built as a module.  If so, the module
 379           will be called g760a.
 380
 381 config SENSORS_GL518SM
 382         tristate "Genesys Logic GL518SM"
 383         depends on I2C
 384         help
 385           If you say yes here you get support for Genesys Logic GL518SM
 386           sensor chips.
 387
 388           This driver can also be built as a module.  If so, the module
 389           will be called gl518sm.
 390
 391 config SENSORS_GL520SM
 392         tristate "Genesys Logic GL520SM"
 393         depends on I2C
 394         select HWMON_VID
 395         help
 396           If you say yes here you get support for Genesys Logic GL520SM
 397           sensor chips.
 398
 399           This driver can also be built as a module.  If so, the module
 400           will be called gl520sm.
 401
 402 config SENSORS_CORETEMP
 403         tristate "Intel Core/Core2/Atom temperature sensor"
 404         depends on X86 && PCI && EXPERIMENTAL
 405         help
 406           If you say yes here you get support for the temperature
 407           sensor inside your CPU. Most of the family 6 CPUs
 408           are supported. Check documentation/driver for details.
 409
 410 config SENSORS_IBMAEM
 411         tristate "IBM Active Energy Manager temperature/power sensors and control"
 412         select IPMI_SI
 413         depends on IPMI_HANDLER
 414         help
 415           If you say yes here you get support for the temperature and
 416           power sensors and capping hardware in various IBM System X
 417           servers that support Active Energy Manager.  This includes
 418           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 419           and certain HC10/HS2x/LS2x/QS2x blades.
 420
 421           This driver can also be built as a module.  If so, the module
 422           will be called ibmaem.
 423
 424 config SENSORS_IBMPEX
 425         tristate "IBM PowerExecutive temperature/power sensors"
 426         select IPMI_SI
 427         depends on IPMI_HANDLER
 428         help
 429           If you say yes here you get support for the temperature and
 430           power sensors in various IBM System X servers that support
 431           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 432           x3655, and x3755; the x3800, x3850, and x3950 models that have
 433           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 434
 435           This driver can also be built as a module.  If so, the module
 436           will be called ibmpex.
 437
 438 config SENSORS_IT87
 439         tristate "ITE IT87xx and compatibles"
 440         select HWMON_VID
 441         help
 442           If you say yes here you get support for ITE IT8705F, IT8712F,
 443           IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
 444           SiS960 clone.
 445
 446           This driver can also be built as a module.  If so, the module
 447           will be called it87.
 448
 449 config SENSORS_LM63
 450         tristate "National Semiconductor LM63 and LM64"
 451         depends on I2C
 452         help
 453           If you say yes here you get support for the National
 454           Semiconductor LM63 and LM64 remote diode digital temperature
 455           sensors with integrated fan control.  Such chips are found
 456           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 457           others.
 458
 459           This driver can also be built as a module.  If so, the module
 460           will be called lm63.
 461
 462 config SENSORS_LM70
 463         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 464         depends on SPI_MASTER && EXPERIMENTAL
 465         help
 466           If you say yes here you get support for the National Semiconductor
 467           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 468           sensor chips.
 469
 470           This driver can also be built as a module.  If so, the module
 471           will be called lm70.
 472
 473 config SENSORS_LM73
 474         tristate "National Semiconductor LM73"
 475         depends on I2C
 476         help
 477           If you say yes here you get support for National Semiconductor LM73
 478           sensor chips.
 479           This driver can also be built as a module.  If so, the module
 480           will be called lm73.
 481
 482 config SENSORS_LM75
 483         tristate "National Semiconductor LM75 and compatibles"
 484         depends on I2C
 485         help
 486           If you say yes here you get support for one common type of
 487           temperature sensor chip, with models including:
 488
 489                 - Dallas Semiconductor DS75 and DS1775
 490                 - Maxim MAX6625 and MAX6626
 491                 - Microchip MCP980x
 492                 - National Semiconductor LM75
 493                 - NXP's LM75A
 494                 - ST Microelectronics STDS75
 495                 - TelCom (now Microchip) TCN75
 496                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 497                   TMP275
 498
 499           This driver supports driver model based binding through board
 500           specific I2C device tables.
 501
 502           It also supports the "legacy" style of driver binding.  To use
 503           that with some chips which don't replicate LM75 quirks exactly,
 504           you may need the "force" module parameter.
 505
 506           This driver can also be built as a module.  If so, the module
 507           will be called lm75.
 508
 509 config SENSORS_LM77
 510         tristate "National Semiconductor LM77"
 511         depends on I2C
 512         help
 513           If you say yes here you get support for National Semiconductor LM77
 514           sensor chips.
 515
 516           This driver can also be built as a module.  If so, the module
 517           will be called lm77.
 518
 519 config SENSORS_LM78
 520         tristate "National Semiconductor LM78 and compatibles"
 521         depends on I2C
 522         select HWMON_VID
 523         help
 524           If you say yes here you get support for National Semiconductor LM78,
 525           LM78-J and LM79.
 526
 527           This driver can also be built as a module.  If so, the module
 528           will be called lm78.
 529
 530 config SENSORS_LM80
 531         tristate "National Semiconductor LM80"
 532         depends on I2C && EXPERIMENTAL
 533         help
 534           If you say yes here you get support for National Semiconductor
 535           LM80 sensor chips.
 536
 537           This driver can also be built as a module.  If so, the module
 538           will be called lm80.
 539
 540 config SENSORS_LM83
 541         tristate "National Semiconductor LM83 and compatibles"
 542         depends on I2C
 543         help
 544           If you say yes here you get support for National Semiconductor
 545           LM82 and LM83 sensor chips.
 546
 547           This driver can also be built as a module.  If so, the module
 548           will be called lm83.
 549
 550 config SENSORS_LM85
 551         tristate "National Semiconductor LM85 and compatibles"
 552         depends on I2C && EXPERIMENTAL
 553         select HWMON_VID
 554         help
 555           If you say yes here you get support for National Semiconductor LM85
 556           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 557
 558           This driver can also be built as a module.  If so, the module
 559           will be called lm85.
 560
 561 config SENSORS_LM87
 562         tristate "National Semiconductor LM87 and compatibles"
 563         depends on I2C
 564         select HWMON_VID
 565         help
 566           If you say yes here you get support for National Semiconductor LM87
 567           and Analog Devices ADM1024 sensor chips.
 568
 569           This driver can also be built as a module.  If so, the module
 570           will be called lm87.
 571
 572 config SENSORS_LM90
 573         tristate "National Semiconductor LM90 and compatibles"
 574         depends on I2C
 575         help
 576           If you say yes here you get support for National Semiconductor LM90,
 577           LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
 578           MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 579           MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
 580           sensor chips.
 581
 582           This driver can also be built as a module.  If so, the module
 583           will be called lm90.
 584
 585 config SENSORS_LM92
 586         tristate "National Semiconductor LM92 and compatibles"
 587         depends on I2C
 588         help
 589           If you say yes here you get support for National Semiconductor LM92
 590           and Maxim MAX6635 sensor chips.
 591
 592           This driver can also be built as a module.  If so, the module
 593           will be called lm92.
 594
 595 config SENSORS_LM93
 596         tristate "National Semiconductor LM93 and compatibles"
 597         depends on I2C
 598         select HWMON_VID
 599         help
 600           If you say yes here you get support for National Semiconductor LM93
 601           sensor chips.
 602
 603           This driver can also be built as a module.  If so, the module
 604           will be called lm93.
 605
 606 config SENSORS_LTC4215
 607         tristate "Linear Technology LTC4215"
 608         depends on I2C && EXPERIMENTAL
 609         default n
 610         help
 611           If you say yes here you get support for Linear Technology LTC4215
 612           Hot Swap Controller I2C interface.
 613
 614           This driver can also be built as a module. If so, the module will
 615           be called ltc4215.
 616
 617 config SENSORS_LTC4245
 618         tristate "Linear Technology LTC4245"
 619         depends on I2C && EXPERIMENTAL
 620         default n
 621         help
 622           If you say yes here you get support for Linear Technology LTC4245
 623           Multiple Supply Hot Swap Controller I2C interface.
 624
 625           This driver can also be built as a module. If so, the module will
 626           be called ltc4245.
 627
 628 config SENSORS_LM95241
 629         tristate "National Semiconductor LM95241 sensor chip"
 630         depends on I2C
 631         help
 632           If you say yes here you get support for LM95241 sensor chip.
 633
 634           This driver can also be built as a module.  If so, the module
 635           will be called lm95241.
 636
 637 config SENSORS_MAX1111
 638         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 639         depends on SPI_MASTER
 640         help
 641           Say y here to support Maxim's MAX1111 ADC chips.
 642
 643           This driver can also be built as a module.  If so, the module
 644           will be called max1111.
 645
 646 config SENSORS_MAX1619
 647         tristate "Maxim MAX1619 sensor chip"
 648         depends on I2C
 649         help
 650           If you say yes here you get support for MAX1619 sensor chip.
 651
 652           This driver can also be built as a module.  If so, the module
 653           will be called max1619.
 654
 655 config SENSORS_MAX6650
 656         tristate "Maxim MAX6650 sensor chip"
 657         depends on I2C && EXPERIMENTAL
 658         help
 659           If you say yes here you get support for the MAX6650 / MAX6651
 660           sensor chips.
 661
 662           This driver can also be built as a module.  If so, the module
 663           will be called max6650.
 664
 665 config SENSORS_PC87360
 666         tristate "National Semiconductor PC87360 family"
 667         select HWMON_VID
 668         help
 669           If you say yes here you get access to the hardware monitoring
 670           functions of the National Semiconductor PC8736x Super-I/O chips.
 671           The PC87360, PC87363 and PC87364 only have fan monitoring and
 672           control.  The PC87365 and PC87366 additionally have voltage and
 673           temperature monitoring.
 674
 675           This driver can also be built as a module.  If so, the module
 676           will be called pc87360.
 677
 678 config SENSORS_PC87427
 679         tristate "National Semiconductor PC87427"
 680         depends on EXPERIMENTAL
 681         help
 682           If you say yes here you get access to the hardware monitoring
 683           functions of the National Semiconductor PC87427 Super-I/O chip.
 684           The chip has two distinct logical devices, one for fan speed
 685           monitoring and control, and one for voltage and temperature
 686           monitoring. Only fan speed monitoring is supported right now.
 687
 688           This driver can also be built as a module.  If so, the module
 689           will be called pc87427.
 690
 691 config SENSORS_PCF8591
 692         tristate "Philips PCF8591 ADC/DAC"
 693         depends on I2C
 694         default n
 695         help
 696           If you say yes here you get support for Philips PCF8591 4-channel
 697           ADC, 1-channel DAC chips.
 698
 699           This driver can also be built as a module.  If so, the module
 700           will be called pcf8591.
 701
 702           These devices are hard to detect and rarely found on mainstream
 703           hardware.  If unsure, say N.
 704
 705 config SENSORS_SHT15
 706         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 707         depends on GENERIC_GPIO
 708         help
 709           If you say yes here you get support for the Sensiron SHT10, SHT11,
 710           SHT15, SHT71, SHT75 humidity and temperature sensors.
 711
 712           This driver can also be built as a module.  If so, the module
 713           will be called sht15.
 714
 715 config SENSORS_S3C
 716         tristate "S3C24XX/S3C64XX Inbuilt ADC"
 717         depends on ARCH_S3C2410
 718         help
 719           If you say yes here you get support for the on-board ADCs of
 720           the Samsung S3C24XX or S3C64XX series of SoC
 721
 722           This driver can also be built as a module. If so, the module
 723           will be called s3c-hwmo.
 724
 725 config SENSORS_S3C_RAW
 726         bool "Include raw channel attributes in sysfs"
 727         depends on SENSORS_S3C
 728         help
 729           Say Y here if you want to include raw copies of all the ADC
 730           channels in sysfs.
 731
 732 config SENSORS_SIS5595
 733         tristate "Silicon Integrated Systems Corp. SiS5595"
 734         depends on PCI
 735         help
 736           If you say yes here you get support for the integrated sensors in
 737           SiS5595 South Bridges.
 738
 739           This driver can also be built as a module.  If so, the module
 740           will be called sis5595.
 741
 742 config SENSORS_DME1737
 743         tristate "SMSC DME1737, SCH311x and compatibles"
 744         depends on I2C && EXPERIMENTAL
 745         select HWMON_VID
 746         help
 747           If you say yes here you get support for the hardware monitoring
 748           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 749           Asus A8000 Super-I/O chips.
 750
 751           This driver can also be built as a module.  If so, the module
 752           will be called dme1737.
 753
 754 config SENSORS_EMC1403
 755         tristate "SMSC EMC1403 thermal sensor"
 756         depends on I2C
 757         help
 758           If you say yes here you get support for the SMSC EMC1403
 759           temperature monitoring chip.
 760
 761           Threshold values can be configured using sysfs.
 762           Data from the different diodes are accessible via sysfs.
 763
 764 config SENSORS_SMSC47M1
 765         tristate "SMSC LPC47M10x and compatibles"
 766         help
 767           If you say yes here you get support for the integrated fan
 768           monitoring and control capabilities of the SMSC LPC47B27x,
 769           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 770           LPC47M192, LPC47M292 and LPC47M997 chips.
 771
 772           The temperature and voltage sensor features of the LPC47M15x,
 773           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 774           driver, select also "SMSC LPC47M192 and compatibles" below for
 775           those.
 776
 777           This driver can also be built as a module.  If so, the module
 778           will be called smsc47m1.
 779
 780 config SENSORS_SMSC47M192
 781         tristate "SMSC LPC47M192 and compatibles"
 782         depends on I2C && EXPERIMENTAL
 783         select HWMON_VID
 784         help
 785           If you say yes here you get support for the temperature and
 786           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 787           and LPC47M997 chips.
 788
 789           The fan monitoring and control capabilities of these chips
 790           are supported by another driver, select
 791           "SMSC LPC47M10x and compatibles" above. You need both drivers
 792           if you want fan control and voltage/temperature sensor support.
 793
 794           This driver can also be built as a module.  If so, the module
 795           will be called smsc47m192.
 796
 797 config SENSORS_SMSC47B397
 798         tristate "SMSC LPC47B397-NC"
 799         depends on EXPERIMENTAL
 800         help
 801           If you say yes here you get support for the SMSC LPC47B397-NC
 802           sensor chip.
 803
 804           This driver can also be built as a module.  If so, the module
 805           will be called smsc47b397.
 806
 807 config SENSORS_ADS7828
 808         tristate "Texas Instruments ADS7828"
 809         depends on I2C
 810         help
 811           If you say yes here you get support for Texas Instruments ADS7828
 812           12-bit 8-channel ADC device.
 813
 814           This driver can also be built as a module.  If so, the module
 815           will be called ads7828.
 816
 817 config SENSORS_ADS7871
 818         tristate "Texas Instruments ADS7871 A/D converter"
 819         depends on SPI
 820         help
 821           If you say yes here you get support for TI ADS7871 & ADS7870
 822
 823           This driver can also be built as a module.  If so, the module
 824           will be called ads7871.
 825
 826 config SENSORS_AMC6821
 827         tristate "Texas Instruments AMC6821"
 828         depends on I2C  && EXPERIMENTAL
 829         help
 830           If you say yes here you get support for the Texas Instruments
 831           AMC6821 hardware monitoring chips.
 832
 833           This driver can also be build as a module.  If so, the module
 834           will be called amc6821.
 835
 836 config SENSORS_THMC50
 837         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 838         depends on I2C && EXPERIMENTAL
 839         help
 840           If you say yes here you get support for Texas Instruments THMC50
 841           sensor chips and clones: the Analog Devices ADM1022.
 842
 843           This driver can also be built as a module.  If so, the module
 844           will be called thmc50.
 845
 846 config SENSORS_TMP102
 847         tristate "Texas Instruments TMP102"
 848         depends on I2C && EXPERIMENTAL
 849         help
 850           If you say yes here you get support for Texas Instruments TMP102
 851           sensor chips.
 852
 853           This driver can also be built as a module.  If so, the module
 854           will be called tmp102.
 855
 856 config SENSORS_TMP401
 857         tristate "Texas Instruments TMP401 and compatibles"
 858         depends on I2C && EXPERIMENTAL
 859         help
 860           If you say yes here you get support for Texas Instruments TMP401 and
 861           TMP411 temperature sensor chips.
 862
 863           This driver can also be built as a module.  If so, the module
 864           will be called tmp401.
 865
 866 config SENSORS_TMP421
 867         tristate "Texas Instruments TMP421 and compatible"
 868         depends on I2C && EXPERIMENTAL
 869         help
 870           If you say yes here you get support for Texas Instruments TMP421,
 871           TMP422 and TMP423 temperature sensor chips.
 872
 873           This driver can also be built as a module.  If so, the module
 874           will be called tmp421.
 875
 876 config SENSORS_VIA_CPUTEMP
 877         tristate "VIA CPU temperature sensor"
 878         depends on X86
 879         help
 880           If you say yes here you get support for the temperature
 881           sensor inside your CPU. Supported are all known variants of
 882           the VIA C7 and Nano.
 883
 884 config SENSORS_VIA686A
 885         tristate "VIA686A"
 886         depends on PCI
 887         help
 888           If you say yes here you get support for the integrated sensors in
 889           Via 686A/B South Bridges.
 890
 891           This driver can also be built as a module.  If so, the module
 892           will be called via686a.
 893
 894 config SENSORS_VT1211
 895         tristate "VIA VT1211"
 896         depends on EXPERIMENTAL
 897         select HWMON_VID
 898         help
 899           If you say yes here then you get support for hardware monitoring
 900           features of the VIA VT1211 Super-I/O chip.
 901
 902           This driver can also be built as a module.  If so, the module
 903           will be called vt1211.
 904
 905 config SENSORS_VT8231
 906         tristate "VIA VT8231"
 907         depends on PCI
 908         select HWMON_VID
 909         help
 910           If you say yes here then you get support for the integrated sensors
 911           in the VIA VT8231 device.
 912
 913           This driver can also be built as a module.  If so, the module
 914           will be called vt8231.
 915
 916 config SENSORS_W83781D
 917         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 918         depends on I2C
 919         select HWMON_VID
 920         help
 921           If you say yes here you get support for the Winbond W8378x series
 922           of sensor chips: the W83781D, W83782D and W83783S, and the similar
 923           Asus AS99127F.
 924
 925           This driver can also be built as a module.  If so, the module
 926           will be called w83781d.
 927
 928 config SENSORS_W83791D
 929         tristate "Winbond W83791D"
 930         depends on I2C
 931         select HWMON_VID
 932         help
 933           If you say yes here you get support for the Winbond W83791D chip.
 934
 935           This driver can also be built as a module.  If so, the module
 936           will be called w83791d.
 937
 938 config SENSORS_W83792D
 939         tristate "Winbond W83792D"
 940         depends on I2C && EXPERIMENTAL
 941         help
 942           If you say yes here you get support for the Winbond W83792D chip.
 943
 944           This driver can also be built as a module.  If so, the module
 945           will be called w83792d.
 946
 947 config SENSORS_W83793
 948         tristate "Winbond W83793"
 949         depends on I2C && EXPERIMENTAL
 950         select HWMON_VID
 951         help
 952           If you say yes here you get support for the Winbond W83793
 953           hardware monitoring chip, including support for the integrated
 954           watchdog.
 955
 956           This driver can also be built as a module.  If so, the module
 957           will be called w83793.
 958
 959 config SENSORS_W83L785TS
 960         tristate "Winbond W83L785TS-S"
 961         depends on I2C && EXPERIMENTAL
 962         help
 963           If you say yes here you get support for the Winbond W83L785TS-S
 964           sensor chip, which is used on the Asus A7N8X, among other
 965           motherboards.
 966
 967           This driver can also be built as a module.  If so, the module
 968           will be called w83l785ts.
 969
 970 config SENSORS_W83L786NG
 971         tristate "Winbond W83L786NG, W83L786NR"
 972         depends on I2C && EXPERIMENTAL
 973         help
 974           If you say yes here you get support for the Winbond W83L786NG
 975           and W83L786NR sensor chips.
 976
 977           This driver can also be built as a module.  If so, the module
 978           will be called w83l786ng.
 979
 980 config SENSORS_W83627HF
 981         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 982         select HWMON_VID
 983         help
 984           If you say yes here you get support for the Winbond W836X7 series
 985           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 986           W83697HF.
 987
 988           This driver can also be built as a module.  If so, the module
 989           will be called w83627hf.
 990
 991 config SENSORS_W83627EHF
 992         tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
 993         select HWMON_VID
 994         help
 995           If you say yes here you get support for the hardware
 996           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 997
 998           This driver also supports the W83627EHG, which is the lead-free
 999           version of the W83627EHF, and the W83627DHG, which is a similar
1000           chip suited for specific Intel processors that use PECI such as
1001           the Core 2 Duo.
1002
1003           This driver also supports the W83667HG chip.
1004
1005           This driver can also be built as a module.  If so, the module
1006           will be called w83627ehf.
1007
1008 config SENSORS_WM831X
1009         tristate "WM831x PMICs"
1010         depends on MFD_WM831X
1011         help
1012           If you say yes here you get support for the hardware
1013           monitoring functionality of the Wolfson Microelectronics
1014           WM831x series of PMICs.
1015
1016           This driver can also be built as a module.  If so, the module
1017           will be called wm831x-hwmon.
1018
1019 config SENSORS_WM8350
1020         tristate "Wolfson Microelectronics WM835x"
1021         depends on MFD_WM8350
1022         help
1023           If you say yes here you get support for the hardware
1024           monitoring features of the WM835x series of PMICs.
1025
1026           This driver can also be built as a module.  If so, the module
1027           will be called wm8350-hwmon.
1028
1029 config SENSORS_ULTRA45
1030         tristate "Sun Ultra45 PIC16F747"
1031         depends on SPARC64
1032         help
1033           This driver provides support for the Ultra45 workstation environmental
1034           sensors.
1035
1036 config SENSORS_HDAPS
1037         tristate "IBM Hard Drive Active Protection System (hdaps)"
1038         depends on INPUT && X86
1039         select INPUT_POLLDEV
1040         default n
1041         help
1042           This driver provides support for the IBM Hard Drive Active Protection
1043           System (hdaps), which provides an accelerometer and other misc. data.
1044           ThinkPads starting with the R50, T41, and X40 are supported.  The
1045           accelerometer data is readable via sysfs.
1046
1047           This driver also provides an absolute input class device, allowing
1048           the laptop to act as a pinball machine-esque joystick.
1049
1050           If your ThinkPad is not recognized by the driver, please update to latest
1051           BIOS. This is especially the case for some R52 ThinkPads.
1052
1053           Say Y here if you have an applicable laptop and want to experience
1054           the awesome power of hdaps.
1055
1056 config SENSORS_LIS3_SPI
1057         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
1058         depends on !ACPI && SPI_MASTER && INPUT
1059         select INPUT_POLLDEV
1060         default n
1061         help
1062           This driver provides support for the LIS3LV02Dx accelerometer connected
1063           via SPI. The accelerometer data is readable via
1064           /sys/devices/platform/lis3lv02d.
1065
1066           This driver also provides an absolute input class device, allowing
1067           the laptop to act as a pinball machine-esque joystick.
1068
1069           This driver can also be built as modules.  If so, the core module
1070           will be called lis3lv02d and a specific module for the SPI transport
1071           is called lis3lv02d_spi.
1072
1073 config SENSORS_LIS3_I2C
1074         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
1075         depends on I2C && INPUT
1076         select INPUT_POLLDEV
1077         default n
1078         help
1079           This driver provides support for the LIS3LV02Dx accelerometer connected
1080           via I2C. The accelerometer data is readable via
1081           /sys/devices/platform/lis3lv02d.
1082
1083           This driver also provides an absolute input class device, allowing
1084           the device to act as a pinball machine-esque joystick.
1085
1086           This driver can also be built as modules.  If so, the core module
1087           will be called lis3lv02d and a specific module for the I2C transport
1088           is called lis3lv02d_i2c.
1089
1090 config SENSORS_APPLESMC
1091         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1092         depends on INPUT && X86
1093         select NEW_LEDS
1094         select LEDS_CLASS
1095         select INPUT_POLLDEV
1096         default n
1097         help
1098           This driver provides support for the Apple System Management
1099           Controller, which provides an accelerometer (Apple Sudden Motion
1100           Sensor), light sensors, temperature sensors, keyboard backlight
1101           control and fan control.
1102
1103           Only Intel-based Apple's computers are supported (MacBook Pro,
1104           MacBook, MacMini).
1105
1106           Data from the different sensors, keyboard backlight control and fan
1107           control are accessible via sysfs.
1108
1109           This driver also provides an absolute input class device, allowing
1110           the laptop to act as a pinball machine-esque joystick.
1111
1112           Say Y here if you have an applicable laptop and want to experience
1113           the awesome power of applesmc.
1114
1115 config SENSORS_MC13783_ADC
1116         tristate "Freescale MC13783 ADC"
1117         depends on MFD_MC13783
1118         help
1119           Support for the A/D converter on MC13783 PMIC.
1120
1121 if ACPI
1122
1123 comment "ACPI drivers"
1124
1125 config SENSORS_ATK0110
1126         tristate "ASUS ATK0110"
1127         depends on X86 && EXPERIMENTAL
1128         help
1129           If you say yes here you get support for the ACPI hardware
1130           monitoring interface found in many ASUS motherboards. This
1131           driver will provide readings of fans, voltages and temperatures
1132           through the system firmware.
1133
1134           This driver can also be built as a module. If so, the module
1135           will be called asus_atk0110.
1136
1137 config SENSORS_LIS3LV02D
1138         tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
1139         depends on INPUT
1140         select INPUT_POLLDEV
1141         select NEW_LEDS
1142         select LEDS_CLASS
1143         default n
1144         help
1145           This driver provides support for the LIS3* accelerometers, such as the
1146           LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
1147           of HP laptops, which have the "Mobile Data Protection System 3D" or
1148           "3D DriveGuard" feature. On such systems the driver should load
1149           automatically (via ACPI alias). The accelerometer might also be found
1150           in other systems, connected via SPI or I2C. The accelerometer data is
1151           readable via /sys/devices/platform/lis3lv02d.
1152
1153           This driver also provides an absolute input class device, allowing
1154           a laptop to act as a pinball machine-esque joystick. It provides also
1155           a misc device which can be used to detect free-fall. On HP laptops,
1156           if the led infrastructure is activated, support for a led indicating
1157           disk protection will be provided as hp::hddprotect. For more
1158           information on the feature, refer to Documentation/hwmon/lis3lv02d.
1159
1160           This driver can also be built as modules.  If so, the core module
1161           will be called lis3lv02d and a specific module for HP laptops will be
1162           called hp_accel.
1163
1164           Say Y here if you have an applicable laptop and want to experience
1165           the awesome power of lis3lv02d.
1166
1167 endif # ACPI
1168
1169 endif # HWMON