drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_AB8500
  43         tristate "AB8500 thermal monitoring"
  44         depends on AB8500_GPADC && AB8500_BM
  45         default n
  46         help
  47           If you say yes here you get support for the thermal sensor part
  48           of the AB8500 chip. The driver includes thermal management for
  49           AB8500 die and two GPADC channels. The GPADC channel are preferably
  50           used to access sensors outside the AB8500 chip.
  51
  52           This driver can also be built as a module.  If so, the module
  53           will be called abx500-temp.
  54
  55 config SENSORS_ABITUGURU
  56         tristate "Abit uGuru (rev 1 & 2)"
  57         depends on X86 && DMI
  58         help
  59           If you say yes here you get support for the sensor part of the first
  60           and second revision of the Abit uGuru chip. The voltage and frequency
  61           control parts of the Abit uGuru are not supported. The Abit uGuru
  62           chip can be found on Abit uGuru featuring motherboards (most modern
  63           Abit motherboards from before end 2005). For more info and a list
  64           of which motherboards have which revision see
  65           Documentation/hwmon/abituguru
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called abituguru.
  69
  70 config SENSORS_ABITUGURU3
  71         tristate "Abit uGuru (rev 3)"
  72         depends on X86 && DMI
  73         help
  74           If you say yes here you get support for the sensor part of the
  75           third revision of the Abit uGuru chip. Only reading the sensors
  76           and their settings is supported. The third revision of the Abit
  77           uGuru chip can be found on recent Abit motherboards (since end
  78           2005). For more info and a list of which motherboards have which
  79           revision see Documentation/hwmon/abituguru3
  80
  81           This driver can also be built as a module.  If so, the module
  82           will be called abituguru3.
  83
  84 config SENSORS_AD7314
  85         tristate "Analog Devices AD7314 and compatibles"
  86         depends on SPI
  87         help
  88           If you say yes here you get support for the Analog Devices
  89           AD7314, ADT7301 and ADT7302 temperature sensors.
  90
  91           This driver can also be built as a module. If so, the module
  92           will be called ad7314.
  93
  94 config SENSORS_AD7414
  95         tristate "Analog Devices AD7414"
  96         depends on I2C
  97         help
  98           If you say yes here you get support for the Analog Devices
  99           AD7414 temperature monitoring chip.
 100
 101           This driver can also be built as a module. If so, the module
 102           will be called ad7414.
 103
 104 config SENSORS_AD7418
 105         tristate "Analog Devices AD7416, AD7417 and AD7418"
 106         depends on I2C
 107         help
 108           If you say yes here you get support for the Analog Devices
 109           AD7416, AD7417 and AD7418 temperature monitoring chips.
 110
 111           This driver can also be built as a module. If so, the module
 112           will be called ad7418.
 113
 114 config SENSORS_ADCXX
 115         tristate "National Semiconductor ADCxxxSxxx"
 116         depends on SPI_MASTER
 117         help
 118           If you say yes here you get support for the National Semiconductor
 119           ADC<bb><c>S<sss> chip family, where
 120           * bb  is the resolution in number of bits (8, 10, 12)
 121           * c   is the number of channels (1, 2, 4, 8)
 122           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 123             kSPS and 101 for 1 MSPS)
 124
 125           Examples : ADC081S101, ADC124S501, ...
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adcxx.
 129
 130 config SENSORS_ADM1021
 131         tristate "Analog Devices ADM1021 and compatibles"
 132         depends on I2C
 133         help
 134           If you say yes here you get support for Analog Devices ADM1021
 135           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 136           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1021.
 140
 141 config SENSORS_ADM1025
 142         tristate "Analog Devices ADM1025 and compatibles"
 143         depends on I2C
 144         select HWMON_VID
 145         help
 146           If you say yes here you get support for Analog Devices ADM1025
 147           and Philips NE1619 sensor chips.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1025.
 151
 152 config SENSORS_ADM1026
 153         tristate "Analog Devices ADM1026 and compatibles"
 154         depends on I2C
 155         select HWMON_VID
 156         help
 157           If you say yes here you get support for Analog Devices ADM1026
 158           sensor chip.
 159
 160           This driver can also be built as a module.  If so, the module
 161           will be called adm1026.
 162
 163 config SENSORS_ADM1029
 164         tristate "Analog Devices ADM1029"
 165         depends on I2C
 166         help
 167           If you say yes here you get support for Analog Devices ADM1029
 168           sensor chip.
 169           Very rare chip, please let us know you use it.
 170
 171           This driver can also be built as a module.  If so, the module
 172           will be called adm1029.
 173
 174 config SENSORS_ADM1031
 175         tristate "Analog Devices ADM1031 and compatibles"
 176         depends on I2C
 177         help
 178           If you say yes here you get support for Analog Devices ADM1031
 179           and ADM1030 sensor chips.
 180
 181           This driver can also be built as a module.  If so, the module
 182           will be called adm1031.
 183
 184 config SENSORS_ADM9240
 185         tristate "Analog Devices ADM9240 and compatibles"
 186         depends on I2C
 187         select HWMON_VID
 188         help
 189           If you say yes here you get support for Analog Devices ADM9240,
 190           Dallas DS1780, National Semiconductor LM81 sensor chips.
 191
 192           This driver can also be built as a module.  If so, the module
 193           will be called adm9240.
 194
 195 config SENSORS_ADT7X10
 196         tristate
 197         help
 198           This module contains common code shared by the ADT7310/ADT7320 and
 199           ADT7410/ADT7420 temperature monitoring chip drivers.
 200
 201           If build as a module, the module will be called adt7x10.
 202
 203 config SENSORS_ADT7310
 204         tristate "Analog Devices ADT7310/ADT7320"
 205         depends on SPI_MASTER
 206         select SENSORS_ADT7X10
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7310 and ADT7320 temperature monitoring chips.
 210
 211           This driver can also be built as a module. If so, the module
 212           will be called adt7310.
 213
 214 config SENSORS_ADT7410
 215         tristate "Analog Devices ADT7410/ADT7420"
 216         depends on I2C
 217         select SENSORS_ADT7X10
 218         help
 219           If you say yes here you get support for the Analog Devices
 220           ADT7410 and ADT7420 temperature monitoring chips.
 221
 222           This driver can also be built as a module. If so, the module
 223           will be called adt7410.
 224
 225 config SENSORS_ADT7411
 226         tristate "Analog Devices ADT7411"
 227         depends on I2C
 228         help
 229           If you say yes here you get support for the Analog Devices
 230           ADT7411 voltage and temperature monitoring chip.
 231
 232           This driver can also be built as a module. If so, the module
 233           will be called adt7411.
 234
 235 config SENSORS_ADT7462
 236         tristate "Analog Devices ADT7462"
 237         depends on I2C
 238         help
 239           If you say yes here you get support for the Analog Devices
 240           ADT7462 temperature monitoring chips.
 241
 242           This driver can also be built as a module. If so, the module
 243           will be called adt7462.
 244
 245 config SENSORS_ADT7470
 246         tristate "Analog Devices ADT7470"
 247         depends on I2C
 248         help
 249           If you say yes here you get support for the Analog Devices
 250           ADT7470 temperature monitoring chips.
 251
 252           This driver can also be built as a module. If so, the module
 253           will be called adt7470.
 254
 255 config SENSORS_ADT7475
 256         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 257         depends on I2C
 258         select HWMON_VID
 259         help
 260           If you say yes here you get support for the Analog Devices
 261           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 262           chips.
 263
 264           This driver can also be build as a module.  If so, the module
 265           will be called adt7475.
 266
 267 config SENSORS_ASC7621
 268         tristate "Andigilog aSC7621"
 269         depends on I2C
 270         help
 271           If you say yes here you get support for the aSC7621
 272           family of SMBus sensors chip found on most Intel X38, X48, X58,
 273           945, 965 and 975 desktop boards.  Currently supported chips:
 274           aSC7621
 275           aSC7621a
 276
 277           This driver can also be built as a module.  If so, the module
 278           will be called asc7621.
 279
 280 config SENSORS_K8TEMP
 281         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 282         depends on X86 && PCI
 283         help
 284           If you say yes here you get support for the temperature
 285           sensor(s) inside your CPU. Supported is whole AMD K8
 286           microarchitecture. Please note that you will need at least
 287           lm-sensors 2.10.1 for proper userspace support.
 288
 289           This driver can also be built as a module.  If so, the module
 290           will be called k8temp.
 291
 292 config SENSORS_K10TEMP
 293         tristate "AMD Family 10h+ temperature sensor"
 294         depends on X86 && PCI
 295         help
 296           If you say yes here you get support for the temperature
 297           sensor(s) inside your CPU. Supported are later revisions of
 298           the AMD Family 10h and all revisions of the AMD Family 11h,
 299           12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
 300           microarchitectures.
 301
 302           This driver can also be built as a module.  If so, the module
 303           will be called k10temp.
 304
 305 config SENSORS_FAM15H_POWER
 306         tristate "AMD Family 15h processor power"
 307         depends on X86 && PCI
 308         help
 309           If you say yes here you get support for processor power
 310           information of your AMD family 15h CPU.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called fam15h_power.
 314
 315 config SENSORS_ASB100
 316         tristate "Asus ASB100 Bach"
 317         depends on X86 && I2C
 318         select HWMON_VID
 319         help
 320           If you say yes here you get support for the ASB100 Bach sensor
 321           chip found on some Asus mainboards.
 322
 323           This driver can also be built as a module.  If so, the module
 324           will be called asb100.
 325
 326 config SENSORS_ATXP1
 327         tristate "Attansic ATXP1 VID controller"
 328         depends on I2C
 329         select HWMON_VID
 330         help
 331           If you say yes here you get support for the Attansic ATXP1 VID
 332           controller.
 333
 334           If your board have such a chip, you are able to control your CPU
 335           core and other voltages.
 336
 337           This driver can also be built as a module.  If so, the module
 338           will be called atxp1.
 339
 340 config SENSORS_DS620
 341         tristate "Dallas Semiconductor DS620"
 342         depends on I2C
 343         help
 344           If you say yes here you get support for Dallas Semiconductor
 345           DS620 sensor chip.
 346
 347           This driver can also be built as a module.  If so, the module
 348           will be called ds620.
 349
 350 config SENSORS_DS1621
 351         tristate "Dallas Semiconductor DS1621 and compatibles"
 352         depends on I2C
 353         help
 354           If you say yes here you get support for Dallas Semiconductor/Maxim
 355           Integrated DS1621 sensor chips and compatible models including:
 356
 357           - Dallas Semiconductor DS1625
 358           - Maxim Integrated DS1631
 359           - Maxim Integrated DS1721
 360           - Maxim Integrated DS1731
 361
 362           This driver can also be built as a module.  If so, the module
 363           will be called ds1621.
 364
 365 config SENSORS_DA9052_ADC
 366         tristate "Dialog DA9052/DA9053 ADC"
 367         depends on PMIC_DA9052
 368         help
 369           Say y here to support the ADC found on Dialog Semiconductor
 370           DA9052-BC and DA9053-AA/Bx PMICs.
 371
 372           This driver can also be built as module. If so, the module
 373           will be called da9052-hwmon.
 374
 375 config SENSORS_DA9055
 376         tristate "Dialog Semiconductor DA9055 ADC"
 377         depends on MFD_DA9055
 378         help
 379           If you say yes here you get support for ADC on the Dialog
 380           Semiconductor DA9055 PMIC.
 381
 382           This driver can also be built as a module.  If so, the module
 383           will be called da9055-hwmon.
 384
 385 config SENSORS_I5K_AMB
 386         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 387         depends on PCI
 388         help
 389           If you say yes here you get support for FB-DIMM AMB temperature
 390           monitoring chips on systems with the Intel 5000 series chipset.
 391
 392           This driver can also be built as a module. If so, the module
 393           will be called i5k_amb.
 394
 395 config SENSORS_F71805F
 396         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 397         depends on !PPC
 398         help
 399           If you say yes here you get support for hardware monitoring
 400           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 401           Super-I/O chips.
 402
 403           This driver can also be built as a module.  If so, the module
 404           will be called f71805f.
 405
 406 config SENSORS_F71882FG
 407         tristate "Fintek F71882FG and compatibles"
 408         depends on !PPC
 409         help
 410           If you say yes here you get support for hardware monitoring
 411           features of many Fintek Super-I/O (LPC) chips. The currently
 412           supported chips are:
 413             F71808E/A
 414             F71858FG
 415             F71862FG
 416             F71863FG
 417             F71869F/E/A
 418             F71882FG
 419             F71883FG
 420             F71889FG/ED/A
 421             F8000
 422             F81801U
 423             F81865F
 424
 425           This driver can also be built as a module.  If so, the module
 426           will be called f71882fg.
 427
 428 config SENSORS_F75375S
 429         tristate "Fintek F75375S/SP, F75373 and F75387"
 430         depends on I2C
 431         help
 432           If you say yes here you get support for hardware monitoring
 433           features of the Fintek F75375S/SP, F75373 and F75387
 434
 435           This driver can also be built as a module.  If so, the module
 436           will be called f75375s.
 437
 438 config SENSORS_FSCHMD
 439         tristate "Fujitsu Siemens Computers sensor chips"
 440         depends on X86 && I2C
 441         help
 442           If you say yes here you get support for the following Fujitsu
 443           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 444           Heimdall, Heracles, Hades and Syleus including support for the
 445           integrated watchdog.
 446
 447           This is a merged driver for FSC sensor chips replacing the fscpos,
 448           fscscy and fscher drivers and adding support for several other FSC
 449           sensor chips.
 450
 451           This driver can also be built as a module.  If so, the module
 452           will be called fschmd.
 453
 454 config SENSORS_G760A
 455         tristate "GMT G760A"
 456         depends on I2C
 457         help
 458           If you say yes here you get support for Global Mixed-mode
 459           Technology Inc G760A fan speed PWM controller chips.
 460
 461           This driver can also be built as a module.  If so, the module
 462           will be called g760a.
 463
 464 config SENSORS_G762
 465         tristate "GMT G762 and G763"
 466         depends on I2C
 467         help
 468           If you say yes here you get support for Global Mixed-mode
 469           Technology Inc G762 and G763 fan speed PWM controller chips.
 470
 471           This driver can also be built as a module.  If so, the module
 472           will be called g762.
 473
 474 config SENSORS_GL518SM
 475         tristate "Genesys Logic GL518SM"
 476         depends on I2C
 477         help
 478           If you say yes here you get support for Genesys Logic GL518SM
 479           sensor chips.
 480
 481           This driver can also be built as a module.  If so, the module
 482           will be called gl518sm.
 483
 484 config SENSORS_GL520SM
 485         tristate "Genesys Logic GL520SM"
 486         depends on I2C
 487         select HWMON_VID
 488         help
 489           If you say yes here you get support for Genesys Logic GL520SM
 490           sensor chips.
 491
 492           This driver can also be built as a module.  If so, the module
 493           will be called gl520sm.
 494
 495 config SENSORS_GPIO_FAN
 496         tristate "GPIO fan"
 497         depends on GPIOLIB
 498         help
 499           If you say yes here you get support for fans connected to GPIO lines.
 500
 501           This driver can also be built as a module.  If so, the module
 502           will be called gpio-fan.
 503
 504 config SENSORS_HIH6130
 505         tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 506         depends on I2C
 507         help
 508           If you say yes here you get support for Honeywell Humidicon
 509           HIH-6130 and HIH-6131 Humidicon humidity sensors.
 510
 511           This driver can also be built as a module.  If so, the module
 512           will be called hih6130.
 513
 514 config SENSORS_CORETEMP
 515         tristate "Intel Core/Core2/Atom temperature sensor"
 516         depends on X86
 517         help
 518           If you say yes here you get support for the temperature
 519           sensor inside your CPU. Most of the family 6 CPUs
 520           are supported. Check Documentation/hwmon/coretemp for details.
 521
 522 config SENSORS_IBMAEM
 523         tristate "IBM Active Energy Manager temperature/power sensors and control"
 524         select IPMI_SI
 525         depends on IPMI_HANDLER
 526         help
 527           If you say yes here you get support for the temperature and
 528           power sensors and capping hardware in various IBM System X
 529           servers that support Active Energy Manager.  This includes
 530           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 531           and certain HC10/HS2x/LS2x/QS2x blades.
 532
 533           This driver can also be built as a module.  If so, the module
 534           will be called ibmaem.
 535
 536 config SENSORS_IBMPEX
 537         tristate "IBM PowerExecutive temperature/power sensors"
 538         select IPMI_SI
 539         depends on IPMI_HANDLER
 540         help
 541           If you say yes here you get support for the temperature and
 542           power sensors in various IBM System X servers that support
 543           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 544           x3655, and x3755; the x3800, x3850, and x3950 models that have
 545           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 546
 547           This driver can also be built as a module.  If so, the module
 548           will be called ibmpex.
 549
 550 config SENSORS_IIO_HWMON
 551         tristate "Hwmon driver that uses channels specified via iio maps"
 552         depends on IIO
 553         help
 554           This is a platform driver that in combination with a suitable
 555           map allows IIO devices to provide basic hwmon functionality
 556           for those channels specified in the map.  This map can be provided
 557           either via platform data or the device tree bindings.
 558
 559 config SENSORS_IT87
 560         tristate "ITE IT87xx and compatibles"
 561         depends on !PPC
 562         select HWMON_VID
 563         help
 564           If you say yes here you get support for ITE IT8705F, IT8712F,
 565           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 566           IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
 567           SiS950 clone.
 568
 569           This driver can also be built as a module.  If so, the module
 570           will be called it87.
 571
 572 config SENSORS_JZ4740
 573         tristate "Ingenic JZ4740 SoC ADC driver"
 574         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 575         help
 576           If you say yes here you get support for reading adc values from the ADCIN
 577           pin on Ingenic JZ4740 SoC based boards.
 578
 579           This driver can also be build as a module. If so, the module will be
 580           called jz4740-hwmon.
 581
 582 config SENSORS_JC42
 583         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 584         depends on I2C
 585         help
 586           If you say yes here, you get support for JEDEC JC42.4 compliant
 587           temperature sensors, which are used on many DDR3 memory modules for
 588           mobile devices and servers.  Support will include, but not be limited
 589           to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 590           MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 591           STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 592
 593           This driver can also be built as a module.  If so, the module
 594           will be called jc42.
 595
 596 config SENSORS_LINEAGE
 597         tristate "Lineage Compact Power Line Power Entry Module"
 598         depends on I2C
 599         help
 600           If you say yes here you get support for the Lineage Compact Power Line
 601           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 602           CP2000DC, CP2725, and others.
 603
 604           This driver can also be built as a module.  If so, the module
 605           will be called lineage-pem.
 606
 607 config SENSORS_LM63
 608         tristate "National Semiconductor LM63 and compatibles"
 609         depends on I2C
 610         help
 611           If you say yes here you get support for the National
 612           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 613           sensors with integrated fan control.  Such chips are found
 614           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 615           others.
 616
 617           This driver can also be built as a module.  If so, the module
 618           will be called lm63.
 619
 620 config SENSORS_LM70
 621         tristate "National Semiconductor LM70 and compatibles"
 622         depends on SPI_MASTER
 623         help
 624           If you say yes here you get support for the National Semiconductor
 625           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 626           ture sensor chips.
 627
 628           This driver can also be built as a module.  If so, the module
 629           will be called lm70.
 630
 631 config SENSORS_LM73
 632         tristate "National Semiconductor LM73"
 633         depends on I2C
 634         help
 635           If you say yes here you get support for National Semiconductor LM73
 636           sensor chips.
 637           This driver can also be built as a module.  If so, the module
 638           will be called lm73.
 639
 640 config SENSORS_LM75
 641         tristate "National Semiconductor LM75 and compatibles"
 642         depends on I2C
 643         help
 644           If you say yes here you get support for one common type of
 645           temperature sensor chip, with models including:
 646
 647                 - Analog Devices ADT75
 648                 - Dallas Semiconductor DS75, DS1775 and DS7505
 649                 - Maxim MAX6625 and MAX6626
 650                 - Microchip MCP980x
 651                 - National Semiconductor LM75, LM75A
 652                 - NXP's LM75A
 653                 - ST Microelectronics STDS75
 654                 - TelCom (now Microchip) TCN75
 655                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 656                   TMP275
 657
 658           This driver supports driver model based binding through board
 659           specific I2C device tables.
 660
 661           It also supports the "legacy" style of driver binding.  To use
 662           that with some chips which don't replicate LM75 quirks exactly,
 663           you may need the "force" module parameter.
 664
 665           This driver can also be built as a module.  If so, the module
 666           will be called lm75.
 667
 668 config SENSORS_LM77
 669         tristate "National Semiconductor LM77"
 670         depends on I2C
 671         help
 672           If you say yes here you get support for National Semiconductor LM77
 673           sensor chips.
 674
 675           This driver can also be built as a module.  If so, the module
 676           will be called lm77.
 677
 678 config SENSORS_LM78
 679         tristate "National Semiconductor LM78 and compatibles"
 680         depends on I2C
 681         select HWMON_VID
 682         help
 683           If you say yes here you get support for National Semiconductor LM78,
 684           LM78-J and LM79.
 685
 686           This driver can also be built as a module.  If so, the module
 687           will be called lm78.
 688
 689 config SENSORS_LM80
 690         tristate "National Semiconductor LM80 and LM96080"
 691         depends on I2C
 692         help
 693           If you say yes here you get support for National Semiconductor
 694           LM80 and LM96080 sensor chips.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called lm80.
 698
 699 config SENSORS_LM83
 700         tristate "National Semiconductor LM83 and compatibles"
 701         depends on I2C
 702         help
 703           If you say yes here you get support for National Semiconductor
 704           LM82 and LM83 sensor chips.
 705
 706           This driver can also be built as a module.  If so, the module
 707           will be called lm83.
 708
 709 config SENSORS_LM85
 710         tristate "National Semiconductor LM85 and compatibles"
 711         depends on I2C
 712         select HWMON_VID
 713         help
 714           If you say yes here you get support for National Semiconductor LM85
 715           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 716           EMC6D101, EMC6D102, and EMC6D103.
 717
 718           This driver can also be built as a module.  If so, the module
 719           will be called lm85.
 720
 721 config SENSORS_LM87
 722         tristate "National Semiconductor LM87 and compatibles"
 723         depends on I2C
 724         select HWMON_VID
 725         help
 726           If you say yes here you get support for National Semiconductor LM87
 727           and Analog Devices ADM1024 sensor chips.
 728
 729           This driver can also be built as a module.  If so, the module
 730           will be called lm87.
 731
 732 config SENSORS_LM90
 733         tristate "National Semiconductor LM90 and compatibles"
 734         depends on I2C
 735         help
 736           If you say yes here you get support for National Semiconductor LM90,
 737           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 738           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 739           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 740           Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 741           sensor chips.
 742
 743           This driver can also be built as a module.  If so, the module
 744           will be called lm90.
 745
 746 config SENSORS_LM92
 747         tristate "National Semiconductor LM92 and compatibles"
 748         depends on I2C
 749         help
 750           If you say yes here you get support for National Semiconductor LM92
 751           and Maxim MAX6635 sensor chips.
 752
 753           This driver can also be built as a module.  If so, the module
 754           will be called lm92.
 755
 756 config SENSORS_LM93
 757         tristate "National Semiconductor LM93 and compatibles"
 758         depends on I2C
 759         select HWMON_VID
 760         help
 761           If you say yes here you get support for National Semiconductor LM93,
 762           LM94, and compatible sensor chips.
 763
 764           This driver can also be built as a module.  If so, the module
 765           will be called lm93.
 766
 767 config SENSORS_LTC4151
 768         tristate "Linear Technology LTC4151"
 769         depends on I2C
 770         default n
 771         help
 772           If you say yes here you get support for Linear Technology LTC4151
 773           High Voltage I2C Current and Voltage Monitor interface.
 774
 775           This driver can also be built as a module. If so, the module will
 776           be called ltc4151.
 777
 778 config SENSORS_LTC4215
 779         tristate "Linear Technology LTC4215"
 780         depends on I2C
 781         default n
 782         help
 783           If you say yes here you get support for Linear Technology LTC4215
 784           Hot Swap Controller I2C interface.
 785
 786           This driver can also be built as a module. If so, the module will
 787           be called ltc4215.
 788
 789 config SENSORS_LTC4245
 790         tristate "Linear Technology LTC4245"
 791         depends on I2C
 792         default n
 793         help
 794           If you say yes here you get support for Linear Technology LTC4245
 795           Multiple Supply Hot Swap Controller I2C interface.
 796
 797           This driver can also be built as a module. If so, the module will
 798           be called ltc4245.
 799
 800 config SENSORS_LTC4261
 801         tristate "Linear Technology LTC4261"
 802         depends on I2C
 803         default n
 804         help
 805           If you say yes here you get support for Linear Technology LTC4261
 806           Negative Voltage Hot Swap Controller I2C interface.
 807
 808           This driver can also be built as a module. If so, the module will
 809           be called ltc4261.
 810
 811 config SENSORS_LM95234
 812         tristate "National Semiconductor LM95234"
 813         depends on I2C
 814         help
 815           If you say yes here you get support for the LM95234 temperature
 816           sensor.
 817
 818           This driver can also be built as a module.  If so, the module
 819           will be called lm95234.
 820
 821 config SENSORS_LM95241
 822         tristate "National Semiconductor LM95241 and compatibles"
 823         depends on I2C
 824         help
 825           If you say yes here you get support for LM95231 and LM95241 sensor
 826           chips.
 827
 828           This driver can also be built as a module.  If so, the module
 829           will be called lm95241.
 830
 831 config SENSORS_LM95245
 832         tristate "National Semiconductor LM95245 sensor chip"
 833         depends on I2C
 834         help
 835           If you say yes here you get support for LM95245 sensor chip.
 836
 837           This driver can also be built as a module.  If so, the module
 838           will be called lm95245.
 839
 840 config SENSORS_MAX1111
 841         tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 842         depends on SPI_MASTER
 843         help
 844           Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 845           ADC chips.
 846
 847           This driver can also be built as a module.  If so, the module
 848           will be called max1111.
 849
 850 config SENSORS_MAX16065
 851         tristate "Maxim MAX16065 System Manager and compatibles"
 852         depends on I2C
 853         help
 854           If you say yes here you get support for hardware monitoring
 855           capabilities of the following Maxim System Manager chips.
 856             MAX16065
 857             MAX16066
 858             MAX16067
 859             MAX16068
 860             MAX16070
 861             MAX16071
 862
 863           This driver can also be built as a module.  If so, the module
 864           will be called max16065.
 865
 866 config SENSORS_MAX1619
 867         tristate "Maxim MAX1619 sensor chip"
 868         depends on I2C
 869         help
 870           If you say yes here you get support for MAX1619 sensor chip.
 871
 872           This driver can also be built as a module.  If so, the module
 873           will be called max1619.
 874
 875 config SENSORS_MAX1668
 876         tristate "Maxim MAX1668 and compatibles"
 877         depends on I2C
 878         help
 879           If you say yes here you get support for MAX1668, MAX1989 and
 880           MAX1805 chips.
 881
 882           This driver can also be built as a module.  If so, the module
 883           will be called max1668.
 884
 885 config SENSORS_MAX197
 886         tristate "Maxim MAX197 and compatibles"
 887         help
 888           Support for the Maxim MAX197 A/D converter.
 889           Support will include, but not be limited to, MAX197, and MAX199.
 890
 891           This driver can also be built as a module. If so, the module
 892           will be called max197.
 893
 894 config SENSORS_MAX6639
 895         tristate "Maxim MAX6639 sensor chip"
 896         depends on I2C
 897         help
 898           If you say yes here you get support for the MAX6639
 899           sensor chips.
 900
 901           This driver can also be built as a module.  If so, the module
 902           will be called max6639.
 903
 904 config SENSORS_MAX6642
 905         tristate "Maxim MAX6642 sensor chip"
 906         depends on I2C
 907         help
 908           If you say yes here you get support for MAX6642 sensor chip.
 909           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 910           with Overtemperature Alarm from Maxim.
 911
 912           This driver can also be built as a module.  If so, the module
 913           will be called max6642.
 914
 915 config SENSORS_MAX6650
 916         tristate "Maxim MAX6650 sensor chip"
 917         depends on I2C
 918         help
 919           If you say yes here you get support for the MAX6650 / MAX6651
 920           sensor chips.
 921
 922           This driver can also be built as a module.  If so, the module
 923           will be called max6650.
 924
 925 config SENSORS_MAX6697
 926         tristate "Maxim MAX6697 and compatibles"
 927         depends on I2C
 928         help
 929           If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 930           MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 931           temperature sensor chips.
 932
 933           This driver can also be built as a module.  If so, the module
 934           will be called max6697.
 935
 936 config SENSORS_MCP3021
 937         tristate "Microchip MCP3021 and compatibles"
 938         depends on I2C
 939         help
 940           If you say yes here you get support for MCP3021 and MCP3221.
 941           The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 942           with 12-bit resolution.
 943
 944           This driver can also be built as a module.  If so, the module
 945           will be called mcp3021.
 946
 947 config SENSORS_NCT6775
 948         tristate "Nuvoton NCT6775F and compatibles"
 949         depends on !PPC
 950         select HWMON_VID
 951         help
 952           If you say yes here you get support for the hardware monitoring
 953           functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
 954           and compatible Super-I/O chips. This driver replaces the
 955           w83627ehf driver for NCT6775F and NCT6776F.
 956
 957           This driver can also be built as a module.  If so, the module
 958           will be called nct6775.
 959
 960 config SENSORS_NTC_THERMISTOR
 961         tristate "NTC thermistor support"
 962         depends on (!OF && !IIO) || (OF && IIO)
 963         help
 964           This driver supports NTC thermistors sensor reading and its
 965           interpretation. The driver can also monitor the temperature and
 966           send notifications about the temperature.
 967
 968           Currently, this driver supports
 969           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 970
 971           This driver can also be built as a module.  If so, the module
 972           will be called ntc-thermistor.
 973
 974 config SENSORS_PC87360
 975         tristate "National Semiconductor PC87360 family"
 976         depends on !PPC
 977         select HWMON_VID
 978         help
 979           If you say yes here you get access to the hardware monitoring
 980           functions of the National Semiconductor PC8736x Super-I/O chips.
 981           The PC87360, PC87363 and PC87364 only have fan monitoring and
 982           control.  The PC87365 and PC87366 additionally have voltage and
 983           temperature monitoring.
 984
 985           This driver can also be built as a module.  If so, the module
 986           will be called pc87360.
 987
 988 config SENSORS_PC87427
 989         tristate "National Semiconductor PC87427"
 990         depends on !PPC
 991         help
 992           If you say yes here you get access to the hardware monitoring
 993           functions of the National Semiconductor PC87427 Super-I/O chip.
 994           The chip has two distinct logical devices, one for fan speed
 995           monitoring and control, and one for voltage and temperature
 996           monitoring. Fan speed monitoring and control are supported, as
 997           well as temperature monitoring. Voltages aren't supported yet.
 998
 999           This driver can also be built as a module.  If so, the module
1000           will be called pc87427.
1001
1002 config SENSORS_PCF8591
1003         tristate "Philips PCF8591 ADC/DAC"
1004         depends on I2C
1005         default n
1006         help
1007           If you say yes here you get support for Philips PCF8591 4-channel
1008           ADC, 1-channel DAC chips.
1009
1010           This driver can also be built as a module.  If so, the module
1011           will be called pcf8591.
1012
1013           These devices are hard to detect and rarely found on mainstream
1014           hardware.  If unsure, say N.
1015
1016 source drivers/hwmon/pmbus/Kconfig
1017
1018 config SENSORS_SHT15
1019         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1020         depends on GPIOLIB
1021         help
1022           If you say yes here you get support for the Sensiron SHT10, SHT11,
1023           SHT15, SHT71, SHT75 humidity and temperature sensors.
1024
1025           This driver can also be built as a module.  If so, the module
1026           will be called sht15.
1027
1028 config SENSORS_SHT21
1029         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1030         depends on I2C
1031         help
1032           If you say yes here you get support for the Sensiron SHT21, SHT25
1033           humidity and temperature sensors.
1034
1035           This driver can also be built as a module.  If so, the module
1036           will be called sht21.
1037
1038 config SENSORS_S3C
1039         tristate "Samsung built-in ADC"
1040         depends on S3C_ADC
1041         help
1042           If you say yes here you get support for the on-board ADCs of
1043           the Samsung S3C24XX, S3C64XX and other series of SoC
1044
1045           This driver can also be built as a module. If so, the module
1046           will be called s3c-hwmon.
1047
1048 config SENSORS_S3C_RAW
1049         bool "Include raw channel attributes in sysfs"
1050         depends on SENSORS_S3C
1051         help
1052           Say Y here if you want to include raw copies of all the ADC
1053           channels in sysfs.
1054
1055 config SENSORS_SIS5595
1056         tristate "Silicon Integrated Systems Corp. SiS5595"
1057         depends on PCI
1058         help
1059           If you say yes here you get support for the integrated sensors in
1060           SiS5595 South Bridges.
1061
1062           This driver can also be built as a module.  If so, the module
1063           will be called sis5595.
1064
1065 config SENSORS_SMM665
1066         tristate "Summit Microelectronics SMM665"
1067         depends on I2C
1068         default n
1069         help
1070           If you say yes here you get support for the hardware monitoring
1071           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1072           Active DC Output Controller / Monitor.
1073
1074           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1075           Support for those chips is untested.
1076
1077           This driver can also be built as a module. If so, the module will
1078           be called smm665.
1079
1080 config SENSORS_DME1737
1081         tristate "SMSC DME1737, SCH311x and compatibles"
1082         depends on I2C && !PPC
1083         select HWMON_VID
1084         help
1085           If you say yes here you get support for the hardware monitoring
1086           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1087           Asus A8000 Super-I/O chips.
1088
1089           This driver can also be built as a module.  If so, the module
1090           will be called dme1737.
1091
1092 config SENSORS_EMC1403
1093         tristate "SMSC EMC1403/23 thermal sensor"
1094         depends on I2C
1095         help
1096           If you say yes here you get support for the SMSC EMC1403/23
1097           temperature monitoring chip.
1098
1099           Threshold values can be configured using sysfs.
1100           Data from the different diodes are accessible via sysfs.
1101
1102 config SENSORS_EMC2103
1103         tristate "SMSC EMC2103"
1104         depends on I2C
1105         help
1106           If you say yes here you get support for the temperature
1107           and fan sensors of the SMSC EMC2103 chips.
1108
1109           This driver can also be built as a module.  If so, the module
1110           will be called emc2103.
1111
1112 config SENSORS_EMC6W201
1113         tristate "SMSC EMC6W201"
1114         depends on I2C
1115         help
1116           If you say yes here you get support for the SMSC EMC6W201
1117           hardware monitoring chip.
1118
1119           This driver can also be built as a module.  If so, the module
1120           will be called emc6w201.
1121
1122 config SENSORS_SMSC47M1
1123         tristate "SMSC LPC47M10x and compatibles"
1124         depends on !PPC
1125         help
1126           If you say yes here you get support for the integrated fan
1127           monitoring and control capabilities of the SMSC LPC47B27x,
1128           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1129           LPC47M192, LPC47M292 and LPC47M997 chips.
1130
1131           The temperature and voltage sensor features of the LPC47M15x,
1132           LPC47M192, LPC47M292 and LPC47M997 are supported by another
1133           driver, select also "SMSC LPC47M192 and compatibles" below for
1134           those.
1135
1136           This driver can also be built as a module.  If so, the module
1137           will be called smsc47m1.
1138
1139 config SENSORS_SMSC47M192
1140         tristate "SMSC LPC47M192 and compatibles"
1141         depends on I2C
1142         select HWMON_VID
1143         help
1144           If you say yes here you get support for the temperature and
1145           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1146           and LPC47M997 chips.
1147
1148           The fan monitoring and control capabilities of these chips
1149           are supported by another driver, select
1150           "SMSC LPC47M10x and compatibles" above. You need both drivers
1151           if you want fan control and voltage/temperature sensor support.
1152
1153           This driver can also be built as a module.  If so, the module
1154           will be called smsc47m192.
1155
1156 config SENSORS_SMSC47B397
1157         tristate "SMSC LPC47B397-NC"
1158         depends on !PPC
1159         help
1160           If you say yes here you get support for the SMSC LPC47B397-NC
1161           sensor chip.
1162
1163           This driver can also be built as a module.  If so, the module
1164           will be called smsc47b397.
1165
1166 config SENSORS_SCH56XX_COMMON
1167         tristate
1168         default n
1169
1170 config SENSORS_SCH5627
1171         tristate "SMSC SCH5627"
1172         depends on !PPC && WATCHDOG
1173         select SENSORS_SCH56XX_COMMON
1174         select WATCHDOG_CORE
1175         help
1176           If you say yes here you get support for the hardware monitoring
1177           features of the SMSC SCH5627 Super-I/O chip including support for
1178           the integrated watchdog.
1179
1180           This driver can also be built as a module.  If so, the module
1181           will be called sch5627.
1182
1183 config SENSORS_SCH5636
1184         tristate "SMSC SCH5636"
1185         depends on !PPC && WATCHDOG
1186         select SENSORS_SCH56XX_COMMON
1187         select WATCHDOG_CORE
1188         help
1189           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1190           hardware monitoring solutions, allowing motherboard manufacturers to
1191           create their own custom hwmon solution based upon the SCH5636.
1192
1193           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1194           hwmon solution. Say yes here if you want support for the Fujitsu
1195           Theseus' hardware monitoring features including support for the
1196           integrated watchdog.
1197
1198           This driver can also be built as a module.  If so, the module
1199           will be called sch5636.
1200
1201 config SENSORS_ADS1015
1202         tristate "Texas Instruments ADS1015"
1203         depends on I2C
1204         help
1205           If you say yes here you get support for Texas Instruments ADS1015
1206           12-bit 4-input ADC device.
1207
1208           This driver can also be built as a module.  If so, the module
1209           will be called ads1015.
1210
1211 config SENSORS_ADS7828
1212         tristate "Texas Instruments ADS7828 and compatibles"
1213         depends on I2C
1214         help
1215           If you say yes here you get support for Texas Instruments ADS7828 and
1216           ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1217           it is 8-bit on ADS7830.
1218
1219           This driver can also be built as a module.  If so, the module
1220           will be called ads7828.
1221
1222 config SENSORS_ADS7871
1223         tristate "Texas Instruments ADS7871 A/D converter"
1224         depends on SPI
1225         help
1226           If you say yes here you get support for TI ADS7871 & ADS7870
1227
1228           This driver can also be built as a module.  If so, the module
1229           will be called ads7871.
1230
1231 config SENSORS_AMC6821
1232         tristate "Texas Instruments AMC6821"
1233         depends on I2C
1234         help
1235           If you say yes here you get support for the Texas Instruments
1236           AMC6821 hardware monitoring chips.
1237
1238           This driver can also be build as a module.  If so, the module
1239           will be called amc6821.
1240
1241 config SENSORS_INA209
1242         tristate "TI / Burr Brown INA209"
1243         depends on I2C
1244         help
1245           If you say yes here you get support for the TI / Burr Brown INA209
1246           voltage / current / power monitor I2C interface.
1247
1248           This driver can also be built as a module. If so, the module will
1249           be called ina209.
1250
1251 config SENSORS_INA2XX
1252         tristate "Texas Instruments INA219 and compatibles"
1253         depends on I2C
1254         help
1255           If you say yes here you get support for INA219, INA220, INA226, and
1256           INA230 power monitor chips.
1257
1258           The INA2xx driver is configured for the default configuration of
1259           the part as described in the datasheet.
1260           Default value for Rshunt is 10 mOhms.
1261           This driver can also be built as a module.  If so, the module
1262           will be called ina2xx.
1263
1264 config SENSORS_THMC50
1265         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1266         depends on I2C
1267         help
1268           If you say yes here you get support for Texas Instruments THMC50
1269           sensor chips and clones: the Analog Devices ADM1022.
1270
1271           This driver can also be built as a module.  If so, the module
1272           will be called thmc50.
1273
1274 config SENSORS_TMP102
1275         tristate "Texas Instruments TMP102"
1276         depends on I2C
1277         help
1278           If you say yes here you get support for Texas Instruments TMP102
1279           sensor chips.
1280
1281           This driver can also be built as a module.  If so, the module
1282           will be called tmp102.
1283
1284 config SENSORS_TMP401
1285         tristate "Texas Instruments TMP401 and compatibles"
1286         depends on I2C
1287         help
1288           If you say yes here you get support for Texas Instruments TMP401,
1289           TMP411, TMP431, and TMP432 temperature sensor chips.
1290
1291           This driver can also be built as a module.  If so, the module
1292           will be called tmp401.
1293
1294 config SENSORS_TMP421
1295         tristate "Texas Instruments TMP421 and compatible"
1296         depends on I2C
1297         help
1298           If you say yes here you get support for Texas Instruments TMP421,
1299           TMP422 and TMP423 temperature sensor chips.
1300
1301           This driver can also be built as a module.  If so, the module
1302           will be called tmp421.
1303
1304 config SENSORS_TWL4030_MADC
1305         tristate "Texas Instruments TWL4030 MADC Hwmon"
1306         depends on TWL4030_MADC
1307         help
1308         If you say yes here you get hwmon support for triton
1309         TWL4030-MADC.
1310
1311         This driver can also be built as a module. If so it will be called
1312         twl4030-madc-hwmon.
1313
1314 config SENSORS_VEXPRESS
1315         tristate "Versatile Express"
1316         depends on VEXPRESS_CONFIG
1317         help
1318           This driver provides support for hardware sensors available on
1319           the ARM Ltd's Versatile Express platform. It can provide wide
1320           range of information like temperature, power, energy.
1321
1322 config SENSORS_VIA_CPUTEMP
1323         tristate "VIA CPU temperature sensor"
1324         depends on X86
1325         select HWMON_VID
1326         help
1327           If you say yes here you get support for the temperature
1328           sensor inside your CPU. Supported are all known variants of
1329           the VIA C7 and Nano.
1330
1331 config SENSORS_VIA686A
1332         tristate "VIA686A"
1333         depends on PCI
1334         help
1335           If you say yes here you get support for the integrated sensors in
1336           Via 686A/B South Bridges.
1337
1338           This driver can also be built as a module.  If so, the module
1339           will be called via686a.
1340
1341 config SENSORS_VT1211
1342         tristate "VIA VT1211"
1343         depends on !PPC
1344         select HWMON_VID
1345         help
1346           If you say yes here then you get support for hardware monitoring
1347           features of the VIA VT1211 Super-I/O chip.
1348
1349           This driver can also be built as a module.  If so, the module
1350           will be called vt1211.
1351
1352 config SENSORS_VT8231
1353         tristate "VIA VT8231"
1354         depends on PCI
1355         select HWMON_VID
1356         help
1357           If you say yes here then you get support for the integrated sensors
1358           in the VIA VT8231 device.
1359
1360           This driver can also be built as a module.  If so, the module
1361           will be called vt8231.
1362
1363 config SENSORS_W83781D
1364         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1365         depends on I2C
1366         select HWMON_VID
1367         help
1368           If you say yes here you get support for the Winbond W8378x series
1369           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1370           Asus AS99127F.
1371
1372           This driver can also be built as a module.  If so, the module
1373           will be called w83781d.
1374
1375 config SENSORS_W83791D
1376         tristate "Winbond W83791D"
1377         depends on I2C
1378         select HWMON_VID
1379         help
1380           If you say yes here you get support for the Winbond W83791D chip.
1381
1382           This driver can also be built as a module.  If so, the module
1383           will be called w83791d.
1384
1385 config SENSORS_W83792D
1386         tristate "Winbond W83792D"
1387         depends on I2C
1388         help
1389           If you say yes here you get support for the Winbond W83792D chip.
1390
1391           This driver can also be built as a module.  If so, the module
1392           will be called w83792d.
1393
1394 config SENSORS_W83793
1395         tristate "Winbond W83793"
1396         depends on I2C
1397         select HWMON_VID
1398         help
1399           If you say yes here you get support for the Winbond W83793
1400           hardware monitoring chip, including support for the integrated
1401           watchdog.
1402
1403           This driver can also be built as a module.  If so, the module
1404           will be called w83793.
1405
1406 config SENSORS_W83795
1407         tristate "Winbond/Nuvoton W83795G/ADG"
1408         depends on I2C
1409         help
1410           If you say yes here you get support for the Winbond W83795G and
1411           W83795ADG hardware monitoring chip, including manual fan speed
1412           control.
1413
1414           This driver can also be built as a module.  If so, the module
1415           will be called w83795.
1416
1417 config SENSORS_W83795_FANCTRL
1418         boolean "Include automatic fan control support (DANGEROUS)"
1419         depends on SENSORS_W83795
1420         default n
1421         help
1422           If you say yes here, support for automatic fan speed control
1423           will be included in the driver.
1424
1425           This part of the code wasn't carefully reviewed and tested yet,
1426           so enabling this option is strongly discouraged on production
1427           servers. Only developers and testers should enable it for the
1428           time being.
1429
1430           Please also note that this option will create sysfs attribute
1431           files which may change in the future, so you shouldn't rely
1432           on them being stable.
1433
1434 config SENSORS_W83L785TS
1435         tristate "Winbond W83L785TS-S"
1436         depends on I2C
1437         help
1438           If you say yes here you get support for the Winbond W83L785TS-S
1439           sensor chip, which is used on the Asus A7N8X, among other
1440           motherboards.
1441
1442           This driver can also be built as a module.  If so, the module
1443           will be called w83l785ts.
1444
1445 config SENSORS_W83L786NG
1446         tristate "Winbond W83L786NG, W83L786NR"
1447         depends on I2C
1448         help
1449           If you say yes here you get support for the Winbond W83L786NG
1450           and W83L786NR sensor chips.
1451
1452           This driver can also be built as a module.  If so, the module
1453           will be called w83l786ng.
1454
1455 config SENSORS_W83627HF
1456         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1457         depends on !PPC
1458         select HWMON_VID
1459         help
1460           If you say yes here you get support for the Winbond W836X7 series
1461           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1462           W83697HF.
1463
1464           This driver can also be built as a module.  If so, the module
1465           will be called w83627hf.
1466
1467 config SENSORS_W83627EHF
1468         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1469         depends on !PPC
1470         select HWMON_VID
1471         help
1472           If you say yes here you get support for the hardware
1473           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1474
1475           This driver also supports the W83627EHG, which is the lead-free
1476           version of the W83627EHF, and the W83627DHG, which is a similar
1477           chip suited for specific Intel processors that use PECI such as
1478           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1479           version of the W83627DHG (as far as hardware monitoring goes.)
1480
1481           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1482           (also known as W83667HG-I), and NCT6776F.
1483
1484           This driver can also be built as a module.  If so, the module
1485           will be called w83627ehf.
1486
1487 config SENSORS_WM831X
1488         tristate "WM831x PMICs"
1489         depends on MFD_WM831X
1490         help
1491           If you say yes here you get support for the hardware
1492           monitoring functionality of the Wolfson Microelectronics
1493           WM831x series of PMICs.
1494
1495           This driver can also be built as a module.  If so, the module
1496           will be called wm831x-hwmon.
1497
1498 config SENSORS_WM8350
1499         tristate "Wolfson Microelectronics WM835x"
1500         depends on MFD_WM8350
1501         help
1502           If you say yes here you get support for the hardware
1503           monitoring features of the WM835x series of PMICs.
1504
1505           This driver can also be built as a module.  If so, the module
1506           will be called wm8350-hwmon.
1507
1508 config SENSORS_ULTRA45
1509         tristate "Sun Ultra45 PIC16F747"
1510         depends on SPARC64
1511         help
1512           This driver provides support for the Ultra45 workstation environmental
1513           sensors.
1514
1515 config SENSORS_APPLESMC
1516         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1517         depends on INPUT && X86
1518         select NEW_LEDS
1519         select LEDS_CLASS
1520         select INPUT_POLLDEV
1521         default n
1522         help
1523           This driver provides support for the Apple System Management
1524           Controller, which provides an accelerometer (Apple Sudden Motion
1525           Sensor), light sensors, temperature sensors, keyboard backlight
1526           control and fan control.
1527
1528           Only Intel-based Apple's computers are supported (MacBook Pro,
1529           MacBook, MacMini).
1530
1531           Data from the different sensors, keyboard backlight control and fan
1532           control are accessible via sysfs.
1533
1534           This driver also provides an absolute input class device, allowing
1535           the laptop to act as a pinball machine-esque joystick.
1536
1537           Say Y here if you have an applicable laptop and want to experience
1538           the awesome power of applesmc.
1539
1540 config SENSORS_MC13783_ADC
1541         tristate "Freescale MC13783/MC13892 ADC"
1542         depends on MFD_MC13XXX
1543         help
1544           Support for the A/D converter on MC13783 and MC13892 PMIC.
1545
1546 if ACPI
1547
1548 comment "ACPI drivers"
1549
1550 config SENSORS_ACPI_POWER
1551         tristate "ACPI 4.0 power meter"
1552         help
1553           This driver exposes ACPI 4.0 power meters as hardware monitoring
1554           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1555           and a power meter.
1556
1557           To compile this driver as a module, choose M here:
1558           the module will be called acpi_power_meter.
1559
1560 config SENSORS_ATK0110
1561         tristate "ASUS ATK0110"
1562         depends on X86
1563         help
1564           If you say yes here you get support for the ACPI hardware
1565           monitoring interface found in many ASUS motherboards. This
1566           driver will provide readings of fans, voltages and temperatures
1567           through the system firmware.
1568
1569           This driver can also be built as a module. If so, the module
1570           will be called asus_atk0110.
1571
1572 endif # ACPI
1573
1574 endif # HWMON