drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config SENSORS_ABITUGURU
  32         tristate "Abit uGuru"
  33         depends on EXPERIMENTAL
  34         help
  35           If you say yes here you get support for the Abit uGuru chips
  36           sensor part. The voltage and frequency control parts of the Abit
  37           uGuru are not supported. The Abit uGuru chip can be found on Abit
  38           uGuru featuring motherboards (most modern Abit motherboards).
  39
  40           This driver can also be built as a module.  If so, the module
  41           will be called abituguru.
  42
  43 config SENSORS_AD7418
  44         tristate "Analog Devices AD7416, AD7417 and AD7418"
  45         depends on I2C && EXPERIMENTAL
  46         help
  47           If you say yes here you get support for the Analog Devices
  48           AD7416, AD7417 and AD7418 temperature monitoring chips.
  49
  50           This driver can also be built as a module. If so, the module
  51           will be called ad7418.
  52
  53 config SENSORS_ADM1021
  54         tristate "Analog Devices ADM1021 and compatibles"
  55         depends on I2C
  56         help
  57           If you say yes here you get support for Analog Devices ADM1021
  58           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  59           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  60           and the XEON processor built-in sensor.
  61
  62           This driver can also be built as a module.  If so, the module
  63           will be called adm1021.
  64
  65 config SENSORS_ADM1025
  66         tristate "Analog Devices ADM1025 and compatibles"
  67         depends on I2C
  68         select HWMON_VID
  69         help
  70           If you say yes here you get support for Analog Devices ADM1025
  71           and Philips NE1619 sensor chips.
  72
  73           This driver can also be built as a module.  If so, the module
  74           will be called adm1025.
  75
  76 config SENSORS_ADM1026
  77         tristate "Analog Devices ADM1026 and compatibles"
  78         depends on I2C && EXPERIMENTAL
  79         select HWMON_VID
  80         help
  81           If you say yes here you get support for Analog Devices ADM1026
  82           sensor chip.
  83
  84           This driver can also be built as a module.  If so, the module
  85           will be called adm1026.
  86
  87 config SENSORS_ADM1029
  88         tristate "Analog Devices ADM1029"
  89         depends on I2C && EXPERIMENTAL
  90         help
  91           If you say yes here you get support for Analog Devices ADM1029
  92           sensor chip.
  93           Very rare chip, please let us know you use it.
  94
  95           This driver can also be built as a module.  If so, the module
  96           will be called adm1029.
  97
  98 config SENSORS_ADM1031
  99         tristate "Analog Devices ADM1031 and compatibles"
 100         depends on I2C && EXPERIMENTAL
 101         help
 102           If you say yes here you get support for Analog Devices ADM1031
 103           and ADM1030 sensor chips.
 104
 105           This driver can also be built as a module.  If so, the module
 106           will be called adm1031.
 107
 108 config SENSORS_ADM9240
 109         tristate "Analog Devices ADM9240 and compatibles"
 110         depends on I2C && EXPERIMENTAL
 111         select HWMON_VID
 112         help
 113           If you say yes here you get support for Analog Devices ADM9240,
 114           Dallas DS1780, National Semiconductor LM81 sensor chips.
 115
 116           This driver can also be built as a module.  If so, the module
 117           will be called adm9240.
 118
 119 config SENSORS_K8TEMP
 120         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 121         depends on X86 && PCI && EXPERIMENTAL
 122         help
 123           If you say yes here you get support for the temperature
 124           sensor(s) inside your CPU. Supported is whole AMD K8
 125           microarchitecture. Please note that you will need at least
 126           lm-sensors 2.10.1 for proper userspace support.
 127
 128           This driver can also be built as a module.  If so, the module
 129           will be called k8temp.
 130
 131 config SENSORS_AMS
 132         tristate "Apple Motion Sensor driver"
 133         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 134         help
 135           Support for the motion sensor included in PowerBooks. Includes
 136           implementations for PMU and I2C.
 137
 138           This driver can also be built as a module. If so, the module
 139           will be called ams.
 140
 141 config SENSORS_AMS_PMU
 142         bool "PMU variant"
 143         depends on SENSORS_AMS && ADB_PMU
 144         default y
 145         help
 146           PMU variant of motion sensor, found in late 2005 PowerBooks.
 147
 148 config SENSORS_AMS_I2C
 149         bool "I2C variant"
 150         depends on SENSORS_AMS && I2C
 151         default y
 152         help
 153           I2C variant of motion sensor, found in early 2005 PowerBooks and
 154           iBooks.
 155
 156 config SENSORS_ASB100
 157         tristate "Asus ASB100 Bach"
 158         depends on I2C && EXPERIMENTAL
 159         select HWMON_VID
 160         help
 161           If you say yes here you get support for the ASB100 Bach sensor
 162           chip found on some Asus mainboards.
 163
 164           This driver can also be built as a module.  If so, the module
 165           will be called asb100.
 166
 167 config SENSORS_ATXP1
 168         tristate "Attansic ATXP1 VID controller"
 169         depends on I2C && EXPERIMENTAL
 170         select HWMON_VID
 171         help
 172           If you say yes here you get support for the Attansic ATXP1 VID
 173           controller.
 174
 175           If your board have such a chip, you are able to control your CPU
 176           core and other voltages.
 177
 178           This driver can also be built as a module.  If so, the module
 179           will be called atxp1.
 180
 181 config SENSORS_DS1621
 182         tristate "Dallas Semiconductor DS1621 and DS1625"
 183         depends on I2C
 184         help
 185           If you say yes here you get support for Dallas Semiconductor
 186           DS1621 and DS1625 sensor chips.
 187
 188           This driver can also be built as a module.  If so, the module
 189           will be called ds1621.
 190
 191 config SENSORS_F71805F
 192         tristate "Fintek F71805F/FG and F71872F/FG"
 193         depends on EXPERIMENTAL
 194         help
 195           If you say yes here you get support for hardware monitoring
 196           features of the Fintek F71805F/FG and F71872F/FG Super-I/O
 197           chips.
 198
 199           This driver can also be built as a module.  If so, the module
 200           will be called f71805f.
 201
 202 config SENSORS_FSCHER
 203         tristate "FSC Hermes"
 204         depends on I2C
 205         help
 206           If you say yes here you get support for Fujitsu Siemens
 207           Computers Hermes sensor chips.
 208
 209           This driver can also be built as a module.  If so, the module
 210           will be called fscher.
 211
 212 config SENSORS_FSCPOS
 213         tristate "FSC Poseidon"
 214         depends on I2C
 215         help
 216           If you say yes here you get support for Fujitsu Siemens
 217           Computers Poseidon sensor chips.
 218
 219           This driver can also be built as a module.  If so, the module
 220           will be called fscpos.
 221
 222 config SENSORS_GL518SM
 223         tristate "Genesys Logic GL518SM"
 224         depends on I2C
 225         help
 226           If you say yes here you get support for Genesys Logic GL518SM
 227           sensor chips.
 228
 229           This driver can also be built as a module.  If so, the module
 230           will be called gl518sm.
 231
 232 config SENSORS_GL520SM
 233         tristate "Genesys Logic GL520SM"
 234         depends on I2C
 235         select HWMON_VID
 236         help
 237           If you say yes here you get support for Genesys Logic GL520SM
 238           sensor chips.
 239
 240           This driver can also be built as a module.  If so, the module
 241           will be called gl520sm.
 242
 243 config SENSORS_CORETEMP
 244         tristate "Intel Core (2) Duo/Solo temperature sensor"
 245         depends on X86 && EXPERIMENTAL
 246         help
 247           If you say yes here you get support for the temperature
 248           sensor inside your CPU. Supported all are all known variants
 249           of Intel Core family.
 250
 251 config SENSORS_IT87
 252         tristate "ITE IT87xx and compatibles"
 253         depends on I2C
 254         select I2C_ISA
 255         select HWMON_VID
 256         help
 257           If you say yes here you get support for ITE IT8705F, IT8712F,
 258           IT8716F and IT8718F sensor chips, and the SiS960 clone.
 259
 260           This driver can also be built as a module.  If so, the module
 261           will be called it87.
 262
 263 config SENSORS_LM63
 264         tristate "National Semiconductor LM63"
 265         depends on I2C
 266         help
 267           If you say yes here you get support for the National Semiconductor
 268           LM63 remote diode digital temperature sensor with integrated fan
 269           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 270           motherboard, among others.
 271
 272           This driver can also be built as a module.  If so, the module
 273           will be called lm63.
 274
 275 config SENSORS_LM70
 276         tristate "National Semiconductor LM70"
 277         depends on SPI_MASTER && EXPERIMENTAL
 278         help
 279           If you say yes here you get support for the National Semiconductor
 280           LM70 digital temperature sensor chip.
 281
 282           This driver can also be built as a module.  If so, the module
 283           will be called lm70.
 284
 285 config SENSORS_LM75
 286         tristate "National Semiconductor LM75 and compatibles"
 287         depends on I2C
 288         help
 289           If you say yes here you get support for National Semiconductor LM75
 290           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 291           9-bit precision mode), and TelCom (now Microchip) TCN75.
 292
 293           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 294           a force module parameter. The driver will not handle the extra
 295           precision anyhow.
 296
 297           This driver can also be built as a module.  If so, the module
 298           will be called lm75.
 299
 300 config SENSORS_LM77
 301         tristate "National Semiconductor LM77"
 302         depends on I2C
 303         help
 304           If you say yes here you get support for National Semiconductor LM77
 305           sensor chips.
 306
 307           This driver can also be built as a module.  If so, the module
 308           will be called lm77.
 309
 310 config SENSORS_LM78
 311         tristate "National Semiconductor LM78 and compatibles"
 312         depends on I2C
 313         select HWMON_VID
 314         help
 315           If you say yes here you get support for National Semiconductor LM78,
 316           LM78-J and LM79.
 317
 318           This driver can also be built as a module.  If so, the module
 319           will be called lm78.
 320
 321 config SENSORS_LM80
 322         tristate "National Semiconductor LM80"
 323         depends on I2C && EXPERIMENTAL
 324         help
 325           If you say yes here you get support for National Semiconductor
 326           LM80 sensor chips.
 327
 328           This driver can also be built as a module.  If so, the module
 329           will be called lm80.
 330
 331 config SENSORS_LM83
 332         tristate "National Semiconductor LM83 and compatibles"
 333         depends on I2C
 334         help
 335           If you say yes here you get support for National Semiconductor
 336           LM82 and LM83 sensor chips.
 337
 338           This driver can also be built as a module.  If so, the module
 339           will be called lm83.
 340
 341 config SENSORS_LM85
 342         tristate "National Semiconductor LM85 and compatibles"
 343         depends on I2C && EXPERIMENTAL
 344         select HWMON_VID
 345         help
 346           If you say yes here you get support for National Semiconductor LM85
 347           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 348
 349           This driver can also be built as a module.  If so, the module
 350           will be called lm85.
 351
 352 config SENSORS_LM87
 353         tristate "National Semiconductor LM87"
 354         depends on I2C
 355         select HWMON_VID
 356         help
 357           If you say yes here you get support for National Semiconductor LM87
 358           sensor chips.
 359
 360           This driver can also be built as a module.  If so, the module
 361           will be called lm87.
 362
 363 config SENSORS_LM90
 364         tristate "National Semiconductor LM90 and compatibles"
 365         depends on I2C
 366         help
 367           If you say yes here you get support for National Semiconductor LM90,
 368           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
 369           MAX6658 sensor chips.
 370
 371           The Analog Devices ADT7461 sensor chip is also supported, but only
 372           if found in ADM1032 compatibility mode.
 373
 374           This driver can also be built as a module.  If so, the module
 375           will be called lm90.
 376
 377 config SENSORS_LM92
 378         tristate "National Semiconductor LM92 and compatibles"
 379         depends on I2C
 380         help
 381           If you say yes here you get support for National Semiconductor LM92
 382           and Maxim MAX6635 sensor chips.
 383
 384           This driver can also be built as a module.  If so, the module
 385           will be called lm92.
 386
 387 config SENSORS_MAX1619
 388         tristate "Maxim MAX1619 sensor chip"
 389         depends on I2C
 390         help
 391           If you say yes here you get support for MAX1619 sensor chip.
 392
 393           This driver can also be built as a module.  If so, the module
 394           will be called max1619.
 395
 396 config SENSORS_MAX6650
 397         tristate "Maxim MAX6650 sensor chip"
 398         depends on I2C && EXPERIMENTAL
 399         help
 400           If you say yes here you get support for the MAX6650 / MAX6651
 401           sensor chips.
 402
 403           This driver can also be built as a module.  If so, the module
 404           will be called max6650.
 405
 406 config SENSORS_PC87360
 407         tristate "National Semiconductor PC87360 family"
 408         depends on I2C && EXPERIMENTAL
 409         select I2C_ISA
 410         select HWMON_VID
 411         help
 412           If you say yes here you get access to the hardware monitoring
 413           functions of the National Semiconductor PC8736x Super-I/O chips.
 414           The PC87360, PC87363 and PC87364 only have fan monitoring and
 415           control.  The PC87365 and PC87366 additionally have voltage and
 416           temperature monitoring.
 417
 418           This driver can also be built as a module.  If so, the module
 419           will be called pc87360.
 420
 421 config SENSORS_PC87427
 422         tristate "National Semiconductor PC87427"
 423         depends on EXPERIMENTAL
 424         help
 425           If you say yes here you get access to the hardware monitoring
 426           functions of the National Semiconductor PC87427 Super-I/O chip.
 427           The chip has two distinct logical devices, one for fan speed
 428           monitoring and control, and one for voltage and temperature
 429           monitoring. Only fan speed monitoring is supported right now.
 430
 431           This driver can also be built as a module.  If so, the module
 432           will be called pc87427.
 433
 434 config SENSORS_SIS5595
 435         tristate "Silicon Integrated Systems Corp. SiS5595"
 436         depends on I2C && PCI && EXPERIMENTAL
 437         select I2C_ISA
 438         help
 439           If you say yes here you get support for the integrated sensors in
 440           SiS5595 South Bridges.
 441
 442           This driver can also be built as a module.  If so, the module
 443           will be called sis5595.
 444
 445 config SENSORS_SMSC47M1
 446         tristate "SMSC LPC47M10x and compatibles"
 447         help
 448           If you say yes here you get support for the integrated fan
 449           monitoring and control capabilities of the SMSC LPC47B27x,
 450           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 451           LPC47M192, LPC47M292 and LPC47M997 chips.
 452
 453           The temperature and voltage sensor features of the LPC47M15x,
 454           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 455           driver, select also "SMSC LPC47M192 and compatibles" below for
 456           those.
 457
 458           This driver can also be built as a module.  If so, the module
 459           will be called smsc47m1.
 460
 461 config SENSORS_SMSC47M192
 462         tristate "SMSC LPC47M192 and compatibles"
 463         depends on I2C && EXPERIMENTAL
 464         select HWMON_VID
 465         help
 466           If you say yes here you get support for the temperature and
 467           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 468           and LPC47M997 chips.
 469
 470           The fan monitoring and control capabilities of these chips
 471           are supported by another driver, select
 472           "SMSC LPC47M10x and compatibles" above. You need both drivers
 473           if you want fan control and voltage/temperature sensor support.
 474
 475           This driver can also be built as a module.  If so, the module
 476           will be called smsc47m192.
 477
 478 config SENSORS_SMSC47B397
 479         tristate "SMSC LPC47B397-NC"
 480         depends on EXPERIMENTAL
 481         help
 482           If you say yes here you get support for the SMSC LPC47B397-NC
 483           sensor chip.
 484
 485           This driver can also be built as a module.  If so, the module
 486           will be called smsc47b397.
 487
 488 config SENSORS_VIA686A
 489         tristate "VIA686A"
 490         depends on I2C && PCI
 491         select I2C_ISA
 492         help
 493           If you say yes here you get support for the integrated sensors in
 494           Via 686A/B South Bridges.
 495
 496           This driver can also be built as a module.  If so, the module
 497           will be called via686a.
 498
 499 config SENSORS_VT1211
 500         tristate "VIA VT1211"
 501         depends on EXPERIMENTAL
 502         select HWMON_VID
 503         help
 504           If you say yes here then you get support for hardware monitoring
 505           features of the VIA VT1211 Super-I/O chip.
 506
 507           This driver can also be built as a module.  If so, the module
 508           will be called vt1211.
 509
 510 config SENSORS_VT8231
 511         tristate "VIA VT8231"
 512         depends on I2C && PCI && EXPERIMENTAL
 513         select HWMON_VID
 514         select I2C_ISA
 515         help
 516           If you say yes here then you get support for the integrated sensors
 517           in the VIA VT8231 device.
 518
 519           This driver can also be built as a module.  If so, the module
 520           will be called vt8231.
 521
 522 config SENSORS_W83781D
 523         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 524         depends on I2C
 525         select HWMON_VID
 526         help
 527           If you say yes here you get support for the Winbond W8378x series
 528           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 529           and the similar Asus AS99127F.
 530
 531           This driver can also be built as a module.  If so, the module
 532           will be called w83781d.
 533
 534 config SENSORS_W83791D
 535         tristate "Winbond W83791D"
 536         depends on I2C && EXPERIMENTAL
 537         select HWMON_VID
 538         help
 539           If you say yes here you get support for the Winbond W83791D chip.
 540
 541           This driver can also be built as a module.  If so, the module
 542           will be called w83791d.
 543
 544 config SENSORS_W83792D
 545         tristate "Winbond W83792D"
 546         depends on I2C && EXPERIMENTAL
 547         help
 548           If you say yes here you get support for the Winbond W83792D chip.
 549
 550           This driver can also be built as a module.  If so, the module
 551           will be called w83792d.
 552
 553 config SENSORS_W83793
 554         tristate "Winbond W83793"
 555         depends on I2C && EXPERIMENTAL
 556         select HWMON_VID
 557         help
 558           If you say yes here you get support for the Winbond W83793
 559           hardware monitoring chip.
 560
 561           This driver can also be built as a module.  If so, the module
 562           will be called w83793.
 563
 564 config SENSORS_W83L785TS
 565         tristate "Winbond W83L785TS-S"
 566         depends on I2C && EXPERIMENTAL
 567         help
 568           If you say yes here you get support for the Winbond W83L785TS-S
 569           sensor chip, which is used on the Asus A7N8X, among other
 570           motherboards.
 571
 572           This driver can also be built as a module.  If so, the module
 573           will be called w83l785ts.
 574
 575 config SENSORS_W83627HF
 576         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 577         select HWMON_VID
 578         help
 579           If you say yes here you get support for the Winbond W836X7 series
 580           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 581           W83697HF.
 582
 583           This driver can also be built as a module.  If so, the module
 584           will be called w83627hf.
 585
 586 config SENSORS_W83627EHF
 587         tristate "Winbond W83627EHF"
 588         depends on I2C && EXPERIMENTAL
 589         select I2C_ISA
 590         help
 591           If you say yes here you get preliminary support for the hardware
 592           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 593           Only fan and temperature inputs are supported at the moment, while
 594           the chip does much more than that.
 595
 596           This driver also supports the W83627EHG, which is the lead-free
 597           version of the W83627EHF.
 598
 599           This driver can also be built as a module.  If so, the module
 600           will be called w83627ehf.
 601
 602 config SENSORS_HDAPS
 603         tristate "IBM Hard Drive Active Protection System (hdaps)"
 604         depends on INPUT && X86
 605         default n
 606         help
 607           This driver provides support for the IBM Hard Drive Active Protection
 608           System (hdaps), which provides an accelerometer and other misc. data.
 609           ThinkPads starting with the R50, T41, and X40 are supported.  The
 610           accelerometer data is readable via sysfs.
 611
 612           This driver also provides an absolute input class device, allowing
 613           the laptop to act as a pinball machine-esque joystick.
 614
 615           If your ThinkPad is not recognized by the driver, please update to latest
 616           BIOS. This is especially the case for some R52 ThinkPads.
 617
 618           Say Y here if you have an applicable laptop and want to experience
 619           the awesome power of hdaps.
 620
 621 config SENSORS_APPLESMC
 622         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 623         depends on HWMON && INPUT && X86
 624         select NEW_LEDS
 625         select LEDS_CLASS
 626         default n
 627         help
 628           This driver provides support for the Apple System Management
 629           Controller, which provides an accelerometer (Apple Sudden Motion
 630           Sensor), light sensors, temperature sensors, keyboard backlight
 631           control and fan control.
 632
 633           Only Intel-based Apple's computers are supported (MacBook Pro,
 634           MacBook, MacMini).
 635
 636           Data from the different sensors, keyboard backlight control and fan
 637           control are accessible via sysfs.
 638
 639           This driver also provides an absolute input class device, allowing
 640           the laptop to act as a pinball machine-esque joystick.
 641
 642           Say Y here if you have an applicable laptop and want to experience
 643           the awesome power of applesmc.
 644
 645 config HWMON_DEBUG_CHIP
 646         bool "Hardware Monitoring Chip debugging messages"
 647         default n
 648         help
 649           Say Y here if you want the I2C chip drivers to produce a bunch of
 650           debug messages to the system log.  Select this if you are having
 651           a problem with I2C support and want to see more of what is going
 652           on.
 653
 654 endif # HWMON