drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config SENSORS_ABITUGURU
  32         tristate "Abit uGuru (rev 1 & 2)"
  33         depends on EXPERIMENTAL
  34         help
  35           If you say yes here you get support for the sensor part of the first
  36           and second revision of the Abit uGuru chip. The voltage and frequency
  37           control parts of the Abit uGuru are not supported. The Abit uGuru
  38           chip can be found on Abit uGuru featuring motherboards (most modern
  39           Abit motherboards from before end 2005). For more info and a list
  40           of which motherboards have which revision see
  41           Documentation/hwmon/abituguru
  42
  43           This driver can also be built as a module.  If so, the module
  44           will be called abituguru.
  45
  46 config SENSORS_ABITUGURU3
  47         tristate "Abit uGuru (rev 3)"
  48         depends on HWMON && EXPERIMENTAL
  49         help
  50           If you say yes here you get support for the sensor part of the
  51           third revision of the Abit uGuru chip. Only reading the sensors
  52           and their settings is supported. The third revision of the Abit
  53           uGuru chip can be found on recent Abit motherboards (since end
  54           2005). For more info and a list of which motherboards have which
  55           revision see Documentation/hwmon/abituguru3
  56
  57           This driver can also be built as a module.  If so, the module
  58           will be called abituguru3.
  59
  60 config SENSORS_AD7418
  61         tristate "Analog Devices AD7416, AD7417 and AD7418"
  62         depends on I2C && EXPERIMENTAL
  63         help
  64           If you say yes here you get support for the Analog Devices
  65           AD7416, AD7417 and AD7418 temperature monitoring chips.
  66
  67           This driver can also be built as a module. If so, the module
  68           will be called ad7418.
  69
  70 config SENSORS_ADM1021
  71         tristate "Analog Devices ADM1021 and compatibles"
  72         depends on I2C
  73         help
  74           If you say yes here you get support for Analog Devices ADM1021
  75           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  76           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  77           and the XEON processor built-in sensor.
  78
  79           This driver can also be built as a module.  If so, the module
  80           will be called adm1021.
  81
  82 config SENSORS_ADM1025
  83         tristate "Analog Devices ADM1025 and compatibles"
  84         depends on I2C
  85         select HWMON_VID
  86         help
  87           If you say yes here you get support for Analog Devices ADM1025
  88           and Philips NE1619 sensor chips.
  89
  90           This driver can also be built as a module.  If so, the module
  91           will be called adm1025.
  92
  93 config SENSORS_ADM1026
  94         tristate "Analog Devices ADM1026 and compatibles"
  95         depends on I2C && EXPERIMENTAL
  96         select HWMON_VID
  97         help
  98           If you say yes here you get support for Analog Devices ADM1026
  99           sensor chip.
 100
 101           This driver can also be built as a module.  If so, the module
 102           will be called adm1026.
 103
 104 config SENSORS_ADM1029
 105         tristate "Analog Devices ADM1029"
 106         depends on I2C && EXPERIMENTAL
 107         help
 108           If you say yes here you get support for Analog Devices ADM1029
 109           sensor chip.
 110           Very rare chip, please let us know you use it.
 111
 112           This driver can also be built as a module.  If so, the module
 113           will be called adm1029.
 114
 115 config SENSORS_ADM1031
 116         tristate "Analog Devices ADM1031 and compatibles"
 117         depends on I2C && EXPERIMENTAL
 118         help
 119           If you say yes here you get support for Analog Devices ADM1031
 120           and ADM1030 sensor chips.
 121
 122           This driver can also be built as a module.  If so, the module
 123           will be called adm1031.
 124
 125 config SENSORS_ADM9240
 126         tristate "Analog Devices ADM9240 and compatibles"
 127         depends on I2C && EXPERIMENTAL
 128         select HWMON_VID
 129         help
 130           If you say yes here you get support for Analog Devices ADM9240,
 131           Dallas DS1780, National Semiconductor LM81 sensor chips.
 132
 133           This driver can also be built as a module.  If so, the module
 134           will be called adm9240.
 135
 136 config SENSORS_K8TEMP
 137         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 138         depends on X86 && PCI && EXPERIMENTAL
 139         help
 140           If you say yes here you get support for the temperature
 141           sensor(s) inside your CPU. Supported is whole AMD K8
 142           microarchitecture. Please note that you will need at least
 143           lm-sensors 2.10.1 for proper userspace support.
 144
 145           This driver can also be built as a module.  If so, the module
 146           will be called k8temp.
 147
 148 config SENSORS_AMS
 149         tristate "Apple Motion Sensor driver"
 150         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 151         help
 152           Support for the motion sensor included in PowerBooks. Includes
 153           implementations for PMU and I2C.
 154
 155           This driver can also be built as a module. If so, the module
 156           will be called ams.
 157
 158 config SENSORS_AMS_PMU
 159         bool "PMU variant"
 160         depends on SENSORS_AMS && ADB_PMU
 161         default y
 162         help
 163           PMU variant of motion sensor, found in late 2005 PowerBooks.
 164
 165 config SENSORS_AMS_I2C
 166         bool "I2C variant"
 167         depends on SENSORS_AMS && I2C
 168         default y
 169         help
 170           I2C variant of motion sensor, found in early 2005 PowerBooks and
 171           iBooks.
 172
 173 config SENSORS_ASB100
 174         tristate "Asus ASB100 Bach"
 175         depends on I2C && EXPERIMENTAL
 176         select HWMON_VID
 177         help
 178           If you say yes here you get support for the ASB100 Bach sensor
 179           chip found on some Asus mainboards.
 180
 181           This driver can also be built as a module.  If so, the module
 182           will be called asb100.
 183
 184 config SENSORS_ATXP1
 185         tristate "Attansic ATXP1 VID controller"
 186         depends on I2C && EXPERIMENTAL
 187         select HWMON_VID
 188         help
 189           If you say yes here you get support for the Attansic ATXP1 VID
 190           controller.
 191
 192           If your board have such a chip, you are able to control your CPU
 193           core and other voltages.
 194
 195           This driver can also be built as a module.  If so, the module
 196           will be called atxp1.
 197
 198 config SENSORS_DS1621
 199         tristate "Dallas Semiconductor DS1621 and DS1625"
 200         depends on I2C
 201         help
 202           If you say yes here you get support for Dallas Semiconductor
 203           DS1621 and DS1625 sensor chips.
 204
 205           This driver can also be built as a module.  If so, the module
 206           will be called ds1621.
 207
 208 config SENSORS_F71805F
 209         tristate "Fintek F71805F/FG and F71872F/FG"
 210         depends on EXPERIMENTAL
 211         help
 212           If you say yes here you get support for hardware monitoring
 213           features of the Fintek F71805F/FG and F71872F/FG Super-I/O
 214           chips.
 215
 216           This driver can also be built as a module.  If so, the module
 217           will be called f71805f.
 218
 219 config SENSORS_FSCHER
 220         tristate "FSC Hermes"
 221         depends on I2C
 222         help
 223           If you say yes here you get support for Fujitsu Siemens
 224           Computers Hermes sensor chips.
 225
 226           This driver can also be built as a module.  If so, the module
 227           will be called fscher.
 228
 229 config SENSORS_FSCPOS
 230         tristate "FSC Poseidon"
 231         depends on I2C
 232         help
 233           If you say yes here you get support for Fujitsu Siemens
 234           Computers Poseidon sensor chips.
 235
 236           This driver can also be built as a module.  If so, the module
 237           will be called fscpos.
 238
 239 config SENSORS_GL518SM
 240         tristate "Genesys Logic GL518SM"
 241         depends on I2C
 242         help
 243           If you say yes here you get support for Genesys Logic GL518SM
 244           sensor chips.
 245
 246           This driver can also be built as a module.  If so, the module
 247           will be called gl518sm.
 248
 249 config SENSORS_GL520SM
 250         tristate "Genesys Logic GL520SM"
 251         depends on I2C
 252         select HWMON_VID
 253         help
 254           If you say yes here you get support for Genesys Logic GL520SM
 255           sensor chips.
 256
 257           This driver can also be built as a module.  If so, the module
 258           will be called gl520sm.
 259
 260 config SENSORS_CORETEMP
 261         tristate "Intel Core (2) Duo/Solo temperature sensor"
 262         depends on X86 && EXPERIMENTAL
 263         help
 264           If you say yes here you get support for the temperature
 265           sensor inside your CPU. Supported all are all known variants
 266           of Intel Core family.
 267
 268 config SENSORS_IT87
 269         tristate "ITE IT87xx and compatibles"
 270         select HWMON_VID
 271         help
 272           If you say yes here you get support for ITE IT8705F, IT8712F,
 273           IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
 274
 275           This driver can also be built as a module.  If so, the module
 276           will be called it87.
 277
 278 config SENSORS_LM63
 279         tristate "National Semiconductor LM63"
 280         depends on I2C
 281         help
 282           If you say yes here you get support for the National Semiconductor
 283           LM63 remote diode digital temperature sensor with integrated fan
 284           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 285           motherboard, among others.
 286
 287           This driver can also be built as a module.  If so, the module
 288           will be called lm63.
 289
 290 config SENSORS_LM70
 291         tristate "National Semiconductor LM70"
 292         depends on SPI_MASTER && EXPERIMENTAL
 293         help
 294           If you say yes here you get support for the National Semiconductor
 295           LM70 digital temperature sensor chip.
 296
 297           This driver can also be built as a module.  If so, the module
 298           will be called lm70.
 299
 300 config SENSORS_LM75
 301         tristate "National Semiconductor LM75 and compatibles"
 302         depends on I2C
 303         help
 304           If you say yes here you get support for National Semiconductor LM75
 305           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 306           9-bit precision mode), and TelCom (now Microchip) TCN75.
 307
 308           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 309           a force module parameter. The driver will not handle the extra
 310           precision anyhow.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called lm75.
 314
 315 config SENSORS_LM77
 316         tristate "National Semiconductor LM77"
 317         depends on I2C
 318         help
 319           If you say yes here you get support for National Semiconductor LM77
 320           sensor chips.
 321
 322           This driver can also be built as a module.  If so, the module
 323           will be called lm77.
 324
 325 config SENSORS_LM78
 326         tristate "National Semiconductor LM78 and compatibles"
 327         depends on I2C
 328         select HWMON_VID
 329         help
 330           If you say yes here you get support for National Semiconductor LM78,
 331           LM78-J and LM79.
 332
 333           This driver can also be built as a module.  If so, the module
 334           will be called lm78.
 335
 336 config SENSORS_LM80
 337         tristate "National Semiconductor LM80"
 338         depends on I2C && EXPERIMENTAL
 339         help
 340           If you say yes here you get support for National Semiconductor
 341           LM80 sensor chips.
 342
 343           This driver can also be built as a module.  If so, the module
 344           will be called lm80.
 345
 346 config SENSORS_LM83
 347         tristate "National Semiconductor LM83 and compatibles"
 348         depends on I2C
 349         help
 350           If you say yes here you get support for National Semiconductor
 351           LM82 and LM83 sensor chips.
 352
 353           This driver can also be built as a module.  If so, the module
 354           will be called lm83.
 355
 356 config SENSORS_LM85
 357         tristate "National Semiconductor LM85 and compatibles"
 358         depends on I2C && EXPERIMENTAL
 359         select HWMON_VID
 360         help
 361           If you say yes here you get support for National Semiconductor LM85
 362           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 363
 364           This driver can also be built as a module.  If so, the module
 365           will be called lm85.
 366
 367 config SENSORS_LM87
 368         tristate "National Semiconductor LM87"
 369         depends on I2C
 370         select HWMON_VID
 371         help
 372           If you say yes here you get support for National Semiconductor LM87
 373           sensor chips.
 374
 375           This driver can also be built as a module.  If so, the module
 376           will be called lm87.
 377
 378 config SENSORS_LM90
 379         tristate "National Semiconductor LM90 and compatibles"
 380         depends on I2C
 381         help
 382           If you say yes here you get support for National Semiconductor LM90,
 383           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
 384           MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
 385
 386           The Analog Devices ADT7461 sensor chip is also supported, but only
 387           if found in ADM1032 compatibility mode.
 388
 389           This driver can also be built as a module.  If so, the module
 390           will be called lm90.
 391
 392 config SENSORS_LM92
 393         tristate "National Semiconductor LM92 and compatibles"
 394         depends on I2C
 395         help
 396           If you say yes here you get support for National Semiconductor LM92
 397           and Maxim MAX6635 sensor chips.
 398
 399           This driver can also be built as a module.  If so, the module
 400           will be called lm92.
 401
 402 config SENSORS_LM93
 403         tristate "National Semiconductor LM93 and compatibles"
 404         depends on HWMON && I2C
 405         select HWMON_VID
 406         help
 407           If you say yes here you get support for National Semiconductor LM93
 408           sensor chips.
 409
 410           This driver can also be built as a module.  If so, the module
 411           will be called lm93.
 412
 413 config SENSORS_MAX1619
 414         tristate "Maxim MAX1619 sensor chip"
 415         depends on I2C
 416         help
 417           If you say yes here you get support for MAX1619 sensor chip.
 418
 419           This driver can also be built as a module.  If so, the module
 420           will be called max1619.
 421
 422 config SENSORS_MAX6650
 423         tristate "Maxim MAX6650 sensor chip"
 424         depends on I2C && EXPERIMENTAL
 425         help
 426           If you say yes here you get support for the MAX6650 / MAX6651
 427           sensor chips.
 428
 429           This driver can also be built as a module.  If so, the module
 430           will be called max6650.
 431
 432 config SENSORS_PC87360
 433         tristate "National Semiconductor PC87360 family"
 434         select HWMON_VID
 435         help
 436           If you say yes here you get access to the hardware monitoring
 437           functions of the National Semiconductor PC8736x Super-I/O chips.
 438           The PC87360, PC87363 and PC87364 only have fan monitoring and
 439           control.  The PC87365 and PC87366 additionally have voltage and
 440           temperature monitoring.
 441
 442           This driver can also be built as a module.  If so, the module
 443           will be called pc87360.
 444
 445 config SENSORS_PC87427
 446         tristate "National Semiconductor PC87427"
 447         depends on EXPERIMENTAL
 448         help
 449           If you say yes here you get access to the hardware monitoring
 450           functions of the National Semiconductor PC87427 Super-I/O chip.
 451           The chip has two distinct logical devices, one for fan speed
 452           monitoring and control, and one for voltage and temperature
 453           monitoring. Only fan speed monitoring is supported right now.
 454
 455           This driver can also be built as a module.  If so, the module
 456           will be called pc87427.
 457
 458 config SENSORS_SIS5595
 459         tristate "Silicon Integrated Systems Corp. SiS5595"
 460         depends on PCI
 461         help
 462           If you say yes here you get support for the integrated sensors in
 463           SiS5595 South Bridges.
 464
 465           This driver can also be built as a module.  If so, the module
 466           will be called sis5595.
 467
 468 config SENSORS_DME1737
 469         tristate "SMSC DME1737 and compatibles"
 470         depends on I2C && EXPERIMENTAL
 471         select HWMON_VID
 472         help
 473           If you say yes here you get support for the hardware monitoring
 474           and fan control features of the SMSC DME1737 (and compatibles
 475           like the Asus A8000) Super-I/O chip.
 476
 477           This driver can also be built as a module.  If so, the module
 478           will be called dme1737.
 479
 480 config SENSORS_SMSC47M1
 481         tristate "SMSC LPC47M10x and compatibles"
 482         help
 483           If you say yes here you get support for the integrated fan
 484           monitoring and control capabilities of the SMSC LPC47B27x,
 485           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 486           LPC47M192, LPC47M292 and LPC47M997 chips.
 487
 488           The temperature and voltage sensor features of the LPC47M15x,
 489           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 490           driver, select also "SMSC LPC47M192 and compatibles" below for
 491           those.
 492
 493           This driver can also be built as a module.  If so, the module
 494           will be called smsc47m1.
 495
 496 config SENSORS_SMSC47M192
 497         tristate "SMSC LPC47M192 and compatibles"
 498         depends on I2C && EXPERIMENTAL
 499         select HWMON_VID
 500         help
 501           If you say yes here you get support for the temperature and
 502           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 503           and LPC47M997 chips.
 504
 505           The fan monitoring and control capabilities of these chips
 506           are supported by another driver, select
 507           "SMSC LPC47M10x and compatibles" above. You need both drivers
 508           if you want fan control and voltage/temperature sensor support.
 509
 510           This driver can also be built as a module.  If so, the module
 511           will be called smsc47m192.
 512
 513 config SENSORS_SMSC47B397
 514         tristate "SMSC LPC47B397-NC"
 515         depends on EXPERIMENTAL
 516         help
 517           If you say yes here you get support for the SMSC LPC47B397-NC
 518           sensor chip.
 519
 520           This driver can also be built as a module.  If so, the module
 521           will be called smsc47b397.
 522
 523 config SENSORS_VIA686A
 524         tristate "VIA686A"
 525         depends on PCI
 526         help
 527           If you say yes here you get support for the integrated sensors in
 528           Via 686A/B South Bridges.
 529
 530           This driver can also be built as a module.  If so, the module
 531           will be called via686a.
 532
 533 config SENSORS_VT1211
 534         tristate "VIA VT1211"
 535         depends on EXPERIMENTAL
 536         select HWMON_VID
 537         help
 538           If you say yes here then you get support for hardware monitoring
 539           features of the VIA VT1211 Super-I/O chip.
 540
 541           This driver can also be built as a module.  If so, the module
 542           will be called vt1211.
 543
 544 config SENSORS_VT8231
 545         tristate "VIA VT8231"
 546         depends on PCI
 547         select HWMON_VID
 548         help
 549           If you say yes here then you get support for the integrated sensors
 550           in the VIA VT8231 device.
 551
 552           This driver can also be built as a module.  If so, the module
 553           will be called vt8231.
 554
 555 config SENSORS_W83781D
 556         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 557         depends on I2C
 558         select HWMON_VID
 559         help
 560           If you say yes here you get support for the Winbond W8378x series
 561           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 562           and the similar Asus AS99127F.
 563
 564           This driver can also be built as a module.  If so, the module
 565           will be called w83781d.
 566
 567 config SENSORS_W83791D
 568         tristate "Winbond W83791D"
 569         depends on I2C && EXPERIMENTAL
 570         select HWMON_VID
 571         help
 572           If you say yes here you get support for the Winbond W83791D chip.
 573
 574           This driver can also be built as a module.  If so, the module
 575           will be called w83791d.
 576
 577 config SENSORS_W83792D
 578         tristate "Winbond W83792D"
 579         depends on I2C && EXPERIMENTAL
 580         help
 581           If you say yes here you get support for the Winbond W83792D chip.
 582
 583           This driver can also be built as a module.  If so, the module
 584           will be called w83792d.
 585
 586 config SENSORS_W83793
 587         tristate "Winbond W83793"
 588         depends on I2C && EXPERIMENTAL
 589         select HWMON_VID
 590         help
 591           If you say yes here you get support for the Winbond W83793
 592           hardware monitoring chip.
 593
 594           This driver can also be built as a module.  If so, the module
 595           will be called w83793.
 596
 597 config SENSORS_W83L785TS
 598         tristate "Winbond W83L785TS-S"
 599         depends on I2C && EXPERIMENTAL
 600         help
 601           If you say yes here you get support for the Winbond W83L785TS-S
 602           sensor chip, which is used on the Asus A7N8X, among other
 603           motherboards.
 604
 605           This driver can also be built as a module.  If so, the module
 606           will be called w83l785ts.
 607
 608 config SENSORS_W83627HF
 609         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 610         select HWMON_VID
 611         help
 612           If you say yes here you get support for the Winbond W836X7 series
 613           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 614           W83697HF.
 615
 616           This driver can also be built as a module.  If so, the module
 617           will be called w83627hf.
 618
 619 config SENSORS_W83627EHF
 620         tristate "Winbond W83627EHF/DHG"
 621         select HWMON_VID
 622         help
 623           If you say yes here you get support for the hardware
 624           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 625
 626           This driver also supports the W83627EHG, which is the lead-free
 627           version of the W83627EHF, and the W83627DHG, which is a similar
 628           chip suited for specific Intel processors that use PECI such as
 629           the Core 2 Duo.
 630
 631           This driver can also be built as a module.  If so, the module
 632           will be called w83627ehf.
 633
 634 config SENSORS_HDAPS
 635         tristate "IBM Hard Drive Active Protection System (hdaps)"
 636         depends on INPUT && X86
 637         default n
 638         help
 639           This driver provides support for the IBM Hard Drive Active Protection
 640           System (hdaps), which provides an accelerometer and other misc. data.
 641           ThinkPads starting with the R50, T41, and X40 are supported.  The
 642           accelerometer data is readable via sysfs.
 643
 644           This driver also provides an absolute input class device, allowing
 645           the laptop to act as a pinball machine-esque joystick.
 646
 647           If your ThinkPad is not recognized by the driver, please update to latest
 648           BIOS. This is especially the case for some R52 ThinkPads.
 649
 650           Say Y here if you have an applicable laptop and want to experience
 651           the awesome power of hdaps.
 652
 653 config SENSORS_APPLESMC
 654         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 655         depends on INPUT && X86
 656         select NEW_LEDS
 657         select LEDS_CLASS
 658         default n
 659         help
 660           This driver provides support for the Apple System Management
 661           Controller, which provides an accelerometer (Apple Sudden Motion
 662           Sensor), light sensors, temperature sensors, keyboard backlight
 663           control and fan control.
 664
 665           Only Intel-based Apple's computers are supported (MacBook Pro,
 666           MacBook, MacMini).
 667
 668           Data from the different sensors, keyboard backlight control and fan
 669           control are accessible via sysfs.
 670
 671           This driver also provides an absolute input class device, allowing
 672           the laptop to act as a pinball machine-esque joystick.
 673
 674           Say Y here if you have an applicable laptop and want to experience
 675           the awesome power of applesmc.
 676
 677 config HWMON_DEBUG_CHIP
 678         bool "Hardware Monitoring Chip debugging messages"
 679         default n
 680         help
 681           Say Y here if you want the I2C chip drivers to produce a bunch of
 682           debug messages to the system log.  Select this if you are having
 683           a problem with I2C support and want to see more of what is going
 684           on.
 685
 686 endif # HWMON