drivers/hwmon/Kconfig

   1 #
   2 # I2C Sensor chip drivers configuration
   3 #
   4
   5 menu "Hardware Monitoring support"
   6
   7 config HWMON
   8         tristate "Hardware Monitoring support"
   9         default y
  10         help
  11           Hardware monitoring devices let you monitor the hardware health
  12           of a system. Most modern motherboards include such a device. It
  13           can include temperature sensors, voltage sensors, fan speed
  14           sensors and various additional features such as the ability to
  15           control the speed of the fans.  If you want this support you
  16           should say Y here and also to the specific driver(s) for your
  17           sensors chip(s) below.
  18
  19           This support can also be built as a module.  If so, the module
  20           will be called hwmon.
  21
  22 config HWMON_VID
  23         tristate
  24         default n
  25
  26 config SENSORS_ADM1021
  27         tristate "Analog Devices ADM1021 and compatibles"
  28         depends on HWMON && I2C
  29         help
  30           If you say yes here you get support for Analog Devices ADM1021
  31           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  32           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  33           and the XEON processor built-in sensor.
  34
  35           This driver can also be built as a module.  If so, the module
  36           will be called adm1021.
  37
  38 config SENSORS_ADM1025
  39         tristate "Analog Devices ADM1025 and compatibles"
  40         depends on HWMON && I2C && EXPERIMENTAL
  41         select HWMON_VID
  42         help
  43           If you say yes here you get support for Analog Devices ADM1025
  44           and Philips NE1619 sensor chips.
  45
  46           This driver can also be built as a module.  If so, the module
  47           will be called adm1025.
  48
  49 config SENSORS_ADM1026
  50         tristate "Analog Devices ADM1026 and compatibles"
  51         depends on HWMON && I2C && EXPERIMENTAL
  52         select HWMON_VID
  53         help
  54           If you say yes here you get support for Analog Devices ADM1026
  55           sensor chip.
  56
  57           This driver can also be built as a module.  If so, the module
  58           will be called adm1026.
  59
  60 config SENSORS_ADM1031
  61         tristate "Analog Devices ADM1031 and compatibles"
  62         depends on HWMON && I2C && EXPERIMENTAL
  63         help
  64           If you say yes here you get support for Analog Devices ADM1031
  65           and ADM1030 sensor chips.
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called adm1031.
  69
  70 config SENSORS_ADM9240
  71         tristate "Analog Devices ADM9240 and compatibles"
  72         depends on HWMON && I2C && EXPERIMENTAL
  73         select HWMON_VID
  74         help
  75           If you say yes here you get support for Analog Devices ADM9240,
  76           Dallas DS1780, National Semiconductor LM81 sensor chips.
  77
  78           This driver can also be built as a module.  If so, the module
  79           will be called adm9240.
  80
  81 config SENSORS_ASB100
  82         tristate "Asus ASB100 Bach"
  83         depends on HWMON && I2C && EXPERIMENTAL
  84         select HWMON_VID
  85         help
  86           If you say yes here you get support for the ASB100 Bach sensor
  87           chip found on some Asus mainboards.
  88
  89           This driver can also be built as a module.  If so, the module
  90           will be called asb100.
  91
  92 config SENSORS_ATXP1
  93         tristate "Attansic ATXP1 VID controller"
  94         depends on HWMON && I2C && EXPERIMENTAL
  95         select HWMON_VID
  96         help
  97           If you say yes here you get support for the Attansic ATXP1 VID
  98           controller.
  99
 100           If your board have such a chip, you are able to control your CPU
 101           core and other voltages.
 102
 103           This driver can also be built as a module.  If so, the module
 104           will be called atxp1.
 105
 106 config SENSORS_DS1621
 107         tristate "Dallas Semiconductor DS1621 and DS1625"
 108         depends on HWMON && I2C && EXPERIMENTAL
 109         help
 110           If you say yes here you get support for Dallas Semiconductor
 111           DS1621 and DS1625 sensor chips.
 112
 113           This driver can also be built as a module.  If so, the module
 114           will be called ds1621.
 115
 116 config SENSORS_FSCHER
 117         tristate "FSC Hermes"
 118         depends on HWMON && I2C && EXPERIMENTAL
 119         help
 120           If you say yes here you get support for Fujitsu Siemens
 121           Computers Hermes sensor chips.
 122
 123           This driver can also be built as a module.  If so, the module
 124           will be called fscher.
 125
 126 config SENSORS_FSCPOS
 127         tristate "FSC Poseidon"
 128         depends on HWMON && I2C && EXPERIMENTAL
 129         help
 130           If you say yes here you get support for Fujitsu Siemens
 131           Computers Poseidon sensor chips.
 132
 133           This driver can also be built as a module.  If so, the module
 134           will be called fscpos.
 135
 136 config SENSORS_GL518SM
 137         tristate "Genesys Logic GL518SM"
 138         depends on HWMON && I2C
 139         help
 140           If you say yes here you get support for Genesys Logic GL518SM
 141           sensor chips.
 142
 143           This driver can also be built as a module.  If so, the module
 144           will be called gl518sm.
 145
 146 config SENSORS_GL520SM
 147         tristate "Genesys Logic GL520SM"
 148         depends on HWMON && I2C && EXPERIMENTAL
 149         select HWMON_VID
 150         help
 151           If you say yes here you get support for Genesys Logic GL520SM
 152           sensor chips.
 153
 154           This driver can also be built as a module.  If so, the module
 155           will be called gl520sm.
 156
 157 config SENSORS_IT87
 158         tristate "ITE IT87xx and compatibles"
 159         depends on HWMON && I2C
 160         select I2C_ISA
 161         select HWMON_VID
 162         help
 163           If you say yes here you get support for ITE IT87xx sensor chips
 164           and clones: SiS960.
 165
 166           This driver can also be built as a module.  If so, the module
 167           will be called it87.
 168
 169 config SENSORS_LM63
 170         tristate "National Semiconductor LM63"
 171         depends on HWMON && I2C && EXPERIMENTAL
 172         help
 173           If you say yes here you get support for the National Semiconductor
 174           LM63 remote diode digital temperature sensor with integrated fan
 175           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 176           motherboard, among others.
 177
 178           This driver can also be built as a module.  If so, the module
 179           will be called lm63.
 180
 181 config SENSORS_LM75
 182         tristate "National Semiconductor LM75 and compatibles"
 183         depends on HWMON && I2C
 184         help
 185           If you say yes here you get support for National Semiconductor LM75
 186           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 187           9-bit precision mode), and TelCom (now Microchip) TCN75.
 188
 189           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 190           a force module parameter. The driver will not handle the extra
 191           precision anyhow.
 192
 193           This driver can also be built as a module.  If so, the module
 194           will be called lm75.
 195
 196 config SENSORS_LM77
 197         tristate "National Semiconductor LM77"
 198         depends on HWMON && I2C && EXPERIMENTAL
 199         help
 200           If you say yes here you get support for National Semiconductor LM77
 201           sensor chips.
 202
 203           This driver can also be built as a module.  If so, the module
 204           will be called lm77.
 205
 206 config SENSORS_LM78
 207         tristate "National Semiconductor LM78 and compatibles"
 208         depends on HWMON && I2C && EXPERIMENTAL
 209         select I2C_ISA
 210         select HWMON_VID
 211         help
 212           If you say yes here you get support for National Semiconductor LM78,
 213           LM78-J and LM79.
 214
 215           This driver can also be built as a module.  If so, the module
 216           will be called lm78.
 217
 218 config SENSORS_LM80
 219         tristate "National Semiconductor LM80"
 220         depends on HWMON && I2C && EXPERIMENTAL
 221         help
 222           If you say yes here you get support for National Semiconductor
 223           LM80 sensor chips.
 224
 225           This driver can also be built as a module.  If so, the module
 226           will be called lm80.
 227
 228 config SENSORS_LM83
 229         tristate "National Semiconductor LM83"
 230         depends on HWMON && I2C
 231         help
 232           If you say yes here you get support for National Semiconductor
 233           LM83 sensor chips.
 234
 235           This driver can also be built as a module.  If so, the module
 236           will be called lm83.
 237
 238 config SENSORS_LM85
 239         tristate "National Semiconductor LM85 and compatibles"
 240         depends on HWMON && I2C && EXPERIMENTAL
 241         select HWMON_VID
 242         help
 243           If you say yes here you get support for National Semiconductor LM85
 244           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 245
 246           This driver can also be built as a module.  If so, the module
 247           will be called lm85.
 248
 249 config SENSORS_LM87
 250         tristate "National Semiconductor LM87"
 251         depends on HWMON && I2C && EXPERIMENTAL
 252         select HWMON_VID
 253         help
 254           If you say yes here you get support for National Semiconductor LM87
 255           sensor chips.
 256
 257           This driver can also be built as a module.  If so, the module
 258           will be called lm87.
 259
 260 config SENSORS_LM90
 261         tristate "National Semiconductor LM90 and compatibles"
 262         depends on HWMON && I2C
 263         help
 264           If you say yes here you get support for National Semiconductor LM90,
 265           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
 266           MAX6658 sensor chips.
 267
 268           The Analog Devices ADT7461 sensor chip is also supported, but only
 269           if found in ADM1032 compatibility mode.
 270
 271           This driver can also be built as a module.  If so, the module
 272           will be called lm90.
 273
 274 config SENSORS_LM92
 275         tristate "National Semiconductor LM92 and compatibles"
 276         depends on HWMON && I2C && EXPERIMENTAL
 277         help
 278           If you say yes here you get support for National Semiconductor LM92
 279           and Maxim MAX6635 sensor chips.
 280
 281           This driver can also be built as a module.  If so, the module
 282           will be called lm92.
 283
 284 config SENSORS_MAX1619
 285         tristate "Maxim MAX1619 sensor chip"
 286         depends on HWMON && I2C && EXPERIMENTAL
 287         help
 288           If you say yes here you get support for MAX1619 sensor chip.
 289
 290           This driver can also be built as a module.  If so, the module
 291           will be called max1619.
 292
 293 config SENSORS_PC87360
 294         tristate "National Semiconductor PC87360 family"
 295         depends on HWMON && I2C && EXPERIMENTAL
 296         select I2C_ISA
 297         select HWMON_VID
 298         help
 299           If you say yes here you get access to the hardware monitoring
 300           functions of the National Semiconductor PC8736x Super-I/O chips.
 301           The PC87360, PC87363 and PC87364 only have fan monitoring and
 302           control.  The PC87365 and PC87366 additionally have voltage and
 303           temperature monitoring.
 304
 305           This driver can also be built as a module.  If so, the module
 306           will be called pc87360.
 307
 308 config SENSORS_SIS5595
 309         tristate "Silicon Integrated Systems Corp. SiS5595"
 310         depends on HWMON && I2C && PCI && EXPERIMENTAL
 311         select I2C_ISA
 312         help
 313           If you say yes here you get support for the integrated sensors in
 314           SiS5595 South Bridges.
 315
 316           This driver can also be built as a module.  If so, the module
 317           will be called sis5595.
 318
 319 config SENSORS_SMSC47M1
 320         tristate "SMSC LPC47M10x and compatibles"
 321         depends on HWMON && I2C && EXPERIMENTAL
 322         select I2C_ISA
 323         help
 324           If you say yes here you get support for the integrated fan
 325           monitoring and control capabilities of the SMSC LPC47B27x,
 326           LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
 327
 328           This driver can also be built as a module.  If so, the module
 329           will be called smsc47m1.
 330
 331 config SENSORS_SMSC47B397
 332         tristate "SMSC LPC47B397-NC"
 333         depends on HWMON && I2C && EXPERIMENTAL
 334         select I2C_ISA
 335         help
 336           If you say yes here you get support for the SMSC LPC47B397-NC
 337           sensor chip.
 338
 339           This driver can also be built as a module.  If so, the module
 340           will be called smsc47b397.
 341
 342 config SENSORS_VIA686A
 343         tristate "VIA686A"
 344         depends on HWMON && I2C && PCI
 345         select I2C_ISA
 346         help
 347           If you say yes here you get support for the integrated sensors in
 348           Via 686A/B South Bridges.
 349
 350           This driver can also be built as a module.  If so, the module
 351           will be called via686a.
 352
 353 config SENSORS_VT8231
 354         tristate "VT8231"
 355         depends on HWMON && I2C && PCI && EXPERIMENTAL
 356         select HWMON_VID
 357         select I2C_ISA
 358         help
 359           If you say yes here then you get support for the integrated sensors
 360           in the VIA VT8231 device.
 361
 362           This driver can also be built as a module.  If so, the module
 363           will be called vt8231.
 364
 365 config SENSORS_W83781D
 366         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 367         depends on HWMON && I2C
 368         select I2C_ISA
 369         select HWMON_VID
 370         help
 371           If you say yes here you get support for the Winbond W8378x series
 372           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 373           and the similar Asus AS99127F.
 374
 375           This driver can also be built as a module.  If so, the module
 376           will be called w83781d.
 377
 378 config SENSORS_W83792D
 379         tristate "Winbond W83792D"
 380         depends on HWMON && I2C && EXPERIMENTAL
 381         help
 382           If you say yes here you get support for the Winbond W83792D chip.
 383
 384           This driver can also be built as a module.  If so, the module
 385           will be called w83792d.
 386
 387 config SENSORS_W83L785TS
 388         tristate "Winbond W83L785TS-S"
 389         depends on HWMON && I2C && EXPERIMENTAL
 390         help
 391           If you say yes here you get support for the Winbond W83L785TS-S
 392           sensor chip, which is used on the Asus A7N8X, among other
 393           motherboards.
 394
 395           This driver can also be built as a module.  If so, the module
 396           will be called w83l785ts.
 397
 398 config SENSORS_W83627HF
 399         tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
 400         depends on HWMON && I2C && EXPERIMENTAL
 401         select I2C_ISA
 402         select HWMON_VID
 403         help
 404           If you say yes here you get support for the Winbond W836X7 series
 405           of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
 406
 407           This driver can also be built as a module.  If so, the module
 408           will be called w83627hf.
 409
 410 config SENSORS_W83627EHF
 411         tristate "Winbond W83627EHF"
 412         depends on HWMON && I2C && EXPERIMENTAL
 413         select I2C_ISA
 414         help
 415           If you say yes here you get preliminary support for the hardware
 416           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 417           Only fan and temperature inputs are supported at the moment, while
 418           the chip does much more than that.
 419
 420           This driver also supports the W83627EHG, which is the lead-free
 421           version of the W83627EHF.
 422
 423           This driver can also be built as a module.  If so, the module
 424           will be called w83627ehf.
 425
 426 config SENSORS_HDAPS
 427         tristate "IBM Hard Drive Active Protection System (hdaps)"
 428         depends on HWMON && INPUT && X86
 429         default n
 430         help
 431           This driver provides support for the IBM Hard Drive Active Protection
 432           System (hdaps), which provides an accelerometer and other misc. data.
 433           ThinkPads starting with the R50, T41, and X40 are supported.  The
 434           accelerometer data is readable via sysfs.
 435
 436           This driver also provides an absolute input class device, allowing
 437           the laptop to act as a pinball machine-esque joystick.
 438
 439           Say Y here if you have an applicable laptop and want to experience
 440           the awesome power of hdaps.
 441
 442 config HWMON_DEBUG_CHIP
 443         bool "Hardware Monitoring Chip debugging messages"
 444         depends on HWMON
 445         default n
 446         help
 447           Say Y here if you want the I2C chip drivers to produce a bunch of
 448           debug messages to the system log.  Select this if you are having
 449           a problem with I2C support and want to see more of what is going
 450           on.
 451
 452 endmenu