drivers/hwmon/Kconfig

   1 #
   2 # I2C Sensor chip drivers configuration
   3 #
   4
   5 menu "Hardware Monitoring support"
   6
   7 config HWMON
   8         tristate "Hardware Monitoring support"
   9         default y
  10         help
  11           Hardware monitoring devices let you monitor the hardware health
  12           of a system. Most modern motherboards include such a device. It
  13           can include temperature sensors, voltage sensors, fan speed
  14           sensors and various additional features such as the ability to
  15           control the speed of the fans.  If you want this support you
  16           should say Y here and also to the specific driver(s) for your
  17           sensors chip(s) below.
  18
  19           This support can also be built as a module.  If so, the module
  20           will be called hwmon.
  21
  22 config HWMON_VID
  23         tristate
  24         default n
  25
  26 config SENSORS_ADM1021
  27         tristate "Analog Devices ADM1021 and compatibles"
  28         depends on HWMON && I2C
  29         help
  30           If you say yes here you get support for Analog Devices ADM1021
  31           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  32           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  33           and the XEON processor built-in sensor.
  34
  35           This driver can also be built as a module.  If so, the module
  36           will be called adm1021.
  37
  38 config SENSORS_ADM1025
  39         tristate "Analog Devices ADM1025 and compatibles"
  40         depends on HWMON && I2C && EXPERIMENTAL
  41         select HWMON_VID
  42         help
  43           If you say yes here you get support for Analog Devices ADM1025
  44           and Philips NE1619 sensor chips.
  45
  46           This driver can also be built as a module.  If so, the module
  47           will be called adm1025.
  48
  49 config SENSORS_ADM1026
  50         tristate "Analog Devices ADM1026 and compatibles"
  51         depends on HWMON && I2C && EXPERIMENTAL
  52         select HWMON_VID
  53         help
  54           If you say yes here you get support for Analog Devices ADM1026
  55           sensor chip.
  56
  57           This driver can also be built as a module.  If so, the module
  58           will be called adm1026.
  59
  60 config SENSORS_ADM1031
  61         tristate "Analog Devices ADM1031 and compatibles"
  62         depends on HWMON && I2C && EXPERIMENTAL
  63         help
  64           If you say yes here you get support for Analog Devices ADM1031
  65           and ADM1030 sensor chips.
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called adm1031.
  69
  70 config SENSORS_ADM9240
  71         tristate "Analog Devices ADM9240 and compatibles"
  72         depends on HWMON && I2C && EXPERIMENTAL
  73         select HWMON_VID
  74         help
  75           If you say yes here you get support for Analog Devices ADM9240,
  76           Dallas DS1780, National Semiconductor LM81 sensor chips.
  77
  78           This driver can also be built as a module.  If so, the module
  79           will be called adm9240.
  80
  81 config SENSORS_ASB100
  82         tristate "Asus ASB100 Bach"
  83         depends on HWMON && I2C && EXPERIMENTAL
  84         select HWMON_VID
  85         help
  86           If you say yes here you get support for the ASB100 Bach sensor
  87           chip found on some Asus mainboards.
  88
  89           This driver can also be built as a module.  If so, the module
  90           will be called asb100.
  91
  92 config SENSORS_ATXP1
  93         tristate "Attansic ATXP1 VID controller"
  94         depends on HWMON && I2C && EXPERIMENTAL
  95         select HWMON_VID
  96         help
  97           If you say yes here you get support for the Attansic ATXP1 VID
  98           controller.
  99
 100           If your board have such a chip, you are able to control your CPU
 101           core and other voltages.
 102
 103           This driver can also be built as a module.  If so, the module
 104           will be called atxp1.
 105
 106 config SENSORS_DS1621
 107         tristate "Dallas Semiconductor DS1621 and DS1625"
 108         depends on HWMON && I2C && EXPERIMENTAL
 109         help
 110           If you say yes here you get support for Dallas Semiconductor
 111           DS1621 and DS1625 sensor chips.
 112
 113           This driver can also be built as a module.  If so, the module
 114           will be called ds1621.
 115
 116 config SENSORS_F71805F
 117         tristate "Fintek F71805F/FG"
 118         depends on HWMON && EXPERIMENTAL
 119         help
 120           If you say yes here you get support for hardware monitoring
 121           features of the Fintek F71805F/FG chips.
 122
 123           This driver can also be built as a module.  If so, the module
 124           will be called f71805f.
 125
 126 config SENSORS_FSCHER
 127         tristate "FSC Hermes"
 128         depends on HWMON && I2C && EXPERIMENTAL
 129         help
 130           If you say yes here you get support for Fujitsu Siemens
 131           Computers Hermes sensor chips.
 132
 133           This driver can also be built as a module.  If so, the module
 134           will be called fscher.
 135
 136 config SENSORS_FSCPOS
 137         tristate "FSC Poseidon"
 138         depends on HWMON && I2C && EXPERIMENTAL
 139         help
 140           If you say yes here you get support for Fujitsu Siemens
 141           Computers Poseidon sensor chips.
 142
 143           This driver can also be built as a module.  If so, the module
 144           will be called fscpos.
 145
 146 config SENSORS_GL518SM
 147         tristate "Genesys Logic GL518SM"
 148         depends on HWMON && I2C
 149         help
 150           If you say yes here you get support for Genesys Logic GL518SM
 151           sensor chips.
 152
 153           This driver can also be built as a module.  If so, the module
 154           will be called gl518sm.
 155
 156 config SENSORS_GL520SM
 157         tristate "Genesys Logic GL520SM"
 158         depends on HWMON && I2C && EXPERIMENTAL
 159         select HWMON_VID
 160         help
 161           If you say yes here you get support for Genesys Logic GL520SM
 162           sensor chips.
 163
 164           This driver can also be built as a module.  If so, the module
 165           will be called gl520sm.
 166
 167 config SENSORS_IT87
 168         tristate "ITE IT87xx and compatibles"
 169         depends on HWMON && I2C
 170         select I2C_ISA
 171         select HWMON_VID
 172         help
 173           If you say yes here you get support for ITE IT87xx sensor chips
 174           and clones: SiS960.
 175
 176           This driver can also be built as a module.  If so, the module
 177           will be called it87.
 178
 179 config SENSORS_LM63
 180         tristate "National Semiconductor LM63"
 181         depends on HWMON && I2C && EXPERIMENTAL
 182         help
 183           If you say yes here you get support for the National Semiconductor
 184           LM63 remote diode digital temperature sensor with integrated fan
 185           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 186           motherboard, among others.
 187
 188           This driver can also be built as a module.  If so, the module
 189           will be called lm63.
 190
 191 config SENSORS_LM75
 192         tristate "National Semiconductor LM75 and compatibles"
 193         depends on HWMON && I2C
 194         help
 195           If you say yes here you get support for National Semiconductor LM75
 196           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 197           9-bit precision mode), and TelCom (now Microchip) TCN75.
 198
 199           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 200           a force module parameter. The driver will not handle the extra
 201           precision anyhow.
 202
 203           This driver can also be built as a module.  If so, the module
 204           will be called lm75.
 205
 206 config SENSORS_LM77
 207         tristate "National Semiconductor LM77"
 208         depends on HWMON && I2C && EXPERIMENTAL
 209         help
 210           If you say yes here you get support for National Semiconductor LM77
 211           sensor chips.
 212
 213           This driver can also be built as a module.  If so, the module
 214           will be called lm77.
 215
 216 config SENSORS_LM78
 217         tristate "National Semiconductor LM78 and compatibles"
 218         depends on HWMON && I2C && EXPERIMENTAL
 219         select I2C_ISA
 220         select HWMON_VID
 221         help
 222           If you say yes here you get support for National Semiconductor LM78,
 223           LM78-J and LM79.
 224
 225           This driver can also be built as a module.  If so, the module
 226           will be called lm78.
 227
 228 config SENSORS_LM80
 229         tristate "National Semiconductor LM80"
 230         depends on HWMON && I2C && EXPERIMENTAL
 231         help
 232           If you say yes here you get support for National Semiconductor
 233           LM80 sensor chips.
 234
 235           This driver can also be built as a module.  If so, the module
 236           will be called lm80.
 237
 238 config SENSORS_LM83
 239         tristate "National Semiconductor LM83 and compatibles"
 240         depends on HWMON && I2C
 241         help
 242           If you say yes here you get support for National Semiconductor
 243           LM82 and LM83 sensor chips.
 244
 245           This driver can also be built as a module.  If so, the module
 246           will be called lm83.
 247
 248 config SENSORS_LM85
 249         tristate "National Semiconductor LM85 and compatibles"
 250         depends on HWMON && I2C && EXPERIMENTAL
 251         select HWMON_VID
 252         help
 253           If you say yes here you get support for National Semiconductor LM85
 254           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 255
 256           This driver can also be built as a module.  If so, the module
 257           will be called lm85.
 258
 259 config SENSORS_LM87
 260         tristate "National Semiconductor LM87"
 261         depends on HWMON && I2C && EXPERIMENTAL
 262         select HWMON_VID
 263         help
 264           If you say yes here you get support for National Semiconductor LM87
 265           sensor chips.
 266
 267           This driver can also be built as a module.  If so, the module
 268           will be called lm87.
 269
 270 config SENSORS_LM90
 271         tristate "National Semiconductor LM90 and compatibles"
 272         depends on HWMON && I2C
 273         help
 274           If you say yes here you get support for National Semiconductor LM90,
 275           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
 276           MAX6658 sensor chips.
 277
 278           The Analog Devices ADT7461 sensor chip is also supported, but only
 279           if found in ADM1032 compatibility mode.
 280
 281           This driver can also be built as a module.  If so, the module
 282           will be called lm90.
 283
 284 config SENSORS_LM92
 285         tristate "National Semiconductor LM92 and compatibles"
 286         depends on HWMON && I2C && EXPERIMENTAL
 287         help
 288           If you say yes here you get support for National Semiconductor LM92
 289           and Maxim MAX6635 sensor chips.
 290
 291           This driver can also be built as a module.  If so, the module
 292           will be called lm92.
 293
 294 config SENSORS_MAX1619
 295         tristate "Maxim MAX1619 sensor chip"
 296         depends on HWMON && I2C && EXPERIMENTAL
 297         help
 298           If you say yes here you get support for MAX1619 sensor chip.
 299
 300           This driver can also be built as a module.  If so, the module
 301           will be called max1619.
 302
 303 config SENSORS_PC87360
 304         tristate "National Semiconductor PC87360 family"
 305         depends on HWMON && I2C && EXPERIMENTAL
 306         select I2C_ISA
 307         select HWMON_VID
 308         help
 309           If you say yes here you get access to the hardware monitoring
 310           functions of the National Semiconductor PC8736x Super-I/O chips.
 311           The PC87360, PC87363 and PC87364 only have fan monitoring and
 312           control.  The PC87365 and PC87366 additionally have voltage and
 313           temperature monitoring.
 314
 315           This driver can also be built as a module.  If so, the module
 316           will be called pc87360.
 317
 318 config SENSORS_SIS5595
 319         tristate "Silicon Integrated Systems Corp. SiS5595"
 320         depends on HWMON && I2C && PCI && EXPERIMENTAL
 321         select I2C_ISA
 322         help
 323           If you say yes here you get support for the integrated sensors in
 324           SiS5595 South Bridges.
 325
 326           This driver can also be built as a module.  If so, the module
 327           will be called sis5595.
 328
 329 config SENSORS_SMSC47M1
 330         tristate "SMSC LPC47M10x and compatibles"
 331         depends on HWMON && I2C && EXPERIMENTAL
 332         select I2C_ISA
 333         help
 334           If you say yes here you get support for the integrated fan
 335           monitoring and control capabilities of the SMSC LPC47B27x,
 336           LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and
 337           LPC47M997 chips.
 338
 339           The temperature and voltage sensor features of the LPC47M192
 340           and LPC47M997 are supported by another driver, select also
 341           "SMSC LPC47M192 and compatibles" below for those.
 342
 343           This driver can also be built as a module.  If so, the module
 344           will be called smsc47m1.
 345
 346 config SENSORS_SMSC47M192
 347         tristate "SMSC LPC47M192 and compatibles"
 348         depends on HWMON && I2C && EXPERIMENTAL
 349         select HWMON_VID
 350         help
 351           If you say yes here you get support for the temperature and
 352           voltage sensors of the SMSC LPC47M192 and LPC47M997 chips.
 353
 354           The fan monitoring and control capabilities of these chips
 355           are supported by another driver, select
 356           "SMSC LPC47M10x and compatibles" above. You need both drivers
 357           if you want fan control and voltage/temperature sensor support.
 358
 359           This driver can also be built as a module.  If so, the module
 360           will be called smsc47m192.
 361
 362 config SENSORS_SMSC47B397
 363         tristate "SMSC LPC47B397-NC"
 364         depends on HWMON && I2C && EXPERIMENTAL
 365         select I2C_ISA
 366         help
 367           If you say yes here you get support for the SMSC LPC47B397-NC
 368           sensor chip.
 369
 370           This driver can also be built as a module.  If so, the module
 371           will be called smsc47b397.
 372
 373 config SENSORS_VIA686A
 374         tristate "VIA686A"
 375         depends on HWMON && I2C && PCI
 376         select I2C_ISA
 377         help
 378           If you say yes here you get support for the integrated sensors in
 379           Via 686A/B South Bridges.
 380
 381           This driver can also be built as a module.  If so, the module
 382           will be called via686a.
 383
 384 config SENSORS_VT8231
 385         tristate "VT8231"
 386         depends on HWMON && I2C && PCI && EXPERIMENTAL
 387         select HWMON_VID
 388         select I2C_ISA
 389         help
 390           If you say yes here then you get support for the integrated sensors
 391           in the VIA VT8231 device.
 392
 393           This driver can also be built as a module.  If so, the module
 394           will be called vt8231.
 395
 396 config SENSORS_W83781D
 397         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 398         depends on HWMON && I2C
 399         select I2C_ISA
 400         select HWMON_VID
 401         help
 402           If you say yes here you get support for the Winbond W8378x series
 403           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 404           and the similar Asus AS99127F.
 405
 406           This driver can also be built as a module.  If so, the module
 407           will be called w83781d.
 408
 409 config SENSORS_W83791D
 410         tristate "Winbond W83791D"
 411         depends on HWMON && I2C && EXPERIMENTAL
 412         select HWMON_VID
 413         help
 414           If you say yes here you get support for the Winbond W83791D chip.
 415
 416           This driver can also be built as a module.  If so, the module
 417           will be called w83791d.
 418
 419 config SENSORS_W83792D
 420         tristate "Winbond W83792D"
 421         depends on HWMON && I2C && EXPERIMENTAL
 422         help
 423           If you say yes here you get support for the Winbond W83792D chip.
 424
 425           This driver can also be built as a module.  If so, the module
 426           will be called w83792d.
 427
 428 config SENSORS_W83L785TS
 429         tristate "Winbond W83L785TS-S"
 430         depends on HWMON && I2C && EXPERIMENTAL
 431         help
 432           If you say yes here you get support for the Winbond W83L785TS-S
 433           sensor chip, which is used on the Asus A7N8X, among other
 434           motherboards.
 435
 436           This driver can also be built as a module.  If so, the module
 437           will be called w83l785ts.
 438
 439 config SENSORS_W83627HF
 440         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 441         depends on HWMON && I2C
 442         select I2C_ISA
 443         select HWMON_VID
 444         help
 445           If you say yes here you get support for the Winbond W836X7 series
 446           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 447           W83697HF.
 448
 449           This driver can also be built as a module.  If so, the module
 450           will be called w83627hf.
 451
 452 config SENSORS_W83627EHF
 453         tristate "Winbond W83627EHF"
 454         depends on HWMON && I2C && EXPERIMENTAL
 455         select I2C_ISA
 456         help
 457           If you say yes here you get preliminary support for the hardware
 458           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 459           Only fan and temperature inputs are supported at the moment, while
 460           the chip does much more than that.
 461
 462           This driver also supports the W83627EHG, which is the lead-free
 463           version of the W83627EHF.
 464
 465           This driver can also be built as a module.  If so, the module
 466           will be called w83627ehf.
 467
 468 config SENSORS_HDAPS
 469         tristate "IBM Hard Drive Active Protection System (hdaps)"
 470         depends on HWMON && INPUT && X86
 471         default n
 472         help
 473           This driver provides support for the IBM Hard Drive Active Protection
 474           System (hdaps), which provides an accelerometer and other misc. data.
 475           ThinkPads starting with the R50, T41, and X40 are supported.  The
 476           accelerometer data is readable via sysfs.
 477
 478           This driver also provides an absolute input class device, allowing
 479           the laptop to act as a pinball machine-esque joystick.
 480
 481           Say Y here if you have an applicable laptop and want to experience
 482           the awesome power of hdaps.
 483
 484 config HWMON_DEBUG_CHIP
 485         bool "Hardware Monitoring Chip debugging messages"
 486         depends on HWMON
 487         default n
 488         help
 489           Say Y here if you want the I2C chip drivers to produce a bunch of
 490           debug messages to the system log.  Select this if you are having
 491           a problem with I2C support and want to see more of what is going
 492           on.
 493
 494 endmenu