2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
43 tristate "AB8500 thermal monitoring"
44 depends on AB8500_GPADC && AB8500_BM
47 If you say yes here you get support for the thermal sensor part
48 of the AB8500 chip. The driver includes thermal management for
49 AB8500 die and two GPADC channels. The GPADC channel are preferably
50 used to access sensors outside the AB8500 chip.
52 This driver can also be built as a module. If so, the module
53 will be called abx500-temp.
55 config SENSORS_ABITUGURU
56 tristate "Abit uGuru (rev 1 & 2)"
59 If you say yes here you get support for the sensor part of the first
60 and second revision of the Abit uGuru chip. The voltage and frequency
61 control parts of the Abit uGuru are not supported. The Abit uGuru
62 chip can be found on Abit uGuru featuring motherboards (most modern
63 Abit motherboards from before end 2005). For more info and a list
64 of which motherboards have which revision see
65 Documentation/hwmon/abituguru
67 This driver can also be built as a module. If so, the module
68 will be called abituguru.
70 config SENSORS_ABITUGURU3
71 tristate "Abit uGuru (rev 3)"
74 If you say yes here you get support for the sensor part of the
75 third revision of the Abit uGuru chip. Only reading the sensors
76 and their settings is supported. The third revision of the Abit
77 uGuru chip can be found on recent Abit motherboards (since end
78 2005). For more info and a list of which motherboards have which
79 revision see Documentation/hwmon/abituguru3
81 This driver can also be built as a module. If so, the module
82 will be called abituguru3.
85 tristate "Analog Devices AD7314 and compatibles"
88 If you say yes here you get support for the Analog Devices
89 AD7314, ADT7301 and ADT7302 temperature sensors.
91 This driver can also be built as a module. If so, the module
92 will be called ad7314.
95 tristate "Analog Devices AD7414"
98 If you say yes here you get support for the Analog Devices
99 AD7414 temperature monitoring chip.
101 This driver can also be built as a module. If so, the module
102 will be called ad7414.
104 config SENSORS_AD7418
105 tristate "Analog Devices AD7416, AD7417 and AD7418"
108 If you say yes here you get support for the Analog Devices
109 AD7416, AD7417 and AD7418 temperature monitoring chips.
111 This driver can also be built as a module. If so, the module
112 will be called ad7418.
115 tristate "National Semiconductor ADCxxxSxxx"
116 depends on SPI_MASTER
118 If you say yes here you get support for the National Semiconductor
119 ADC<bb><c>S<sss> chip family, where
120 * bb is the resolution in number of bits (8, 10, 12)
121 * c is the number of channels (1, 2, 4, 8)
122 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
123 kSPS and 101 for 1 MSPS)
125 Examples : ADC081S101, ADC124S501, ...
127 This driver can also be built as a module. If so, the module
128 will be called adcxx.
130 config SENSORS_ADM1021
131 tristate "Analog Devices ADM1021 and compatibles"
134 If you say yes here you get support for Analog Devices ADM1021
135 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
136 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
138 This driver can also be built as a module. If so, the module
139 will be called adm1021.
141 config SENSORS_ADM1025
142 tristate "Analog Devices ADM1025 and compatibles"
146 If you say yes here you get support for Analog Devices ADM1025
147 and Philips NE1619 sensor chips.
149 This driver can also be built as a module. If so, the module
150 will be called adm1025.
152 config SENSORS_ADM1026
153 tristate "Analog Devices ADM1026 and compatibles"
157 If you say yes here you get support for Analog Devices ADM1026
160 This driver can also be built as a module. If so, the module
161 will be called adm1026.
163 config SENSORS_ADM1029
164 tristate "Analog Devices ADM1029"
167 If you say yes here you get support for Analog Devices ADM1029
169 Very rare chip, please let us know you use it.
171 This driver can also be built as a module. If so, the module
172 will be called adm1029.
174 config SENSORS_ADM1031
175 tristate "Analog Devices ADM1031 and compatibles"
178 If you say yes here you get support for Analog Devices ADM1031
179 and ADM1030 sensor chips.
181 This driver can also be built as a module. If so, the module
182 will be called adm1031.
184 config SENSORS_ADM9240
185 tristate "Analog Devices ADM9240 and compatibles"
189 If you say yes here you get support for Analog Devices ADM9240,
190 Dallas DS1780, National Semiconductor LM81 sensor chips.
192 This driver can also be built as a module. If so, the module
193 will be called adm9240.
195 config SENSORS_ADT7X10
198 This module contains common code shared by the ADT7310/ADT7320 and
199 ADT7410/ADT7420 temperature monitoring chip drivers.
201 If build as a module, the module will be called adt7x10.
203 config SENSORS_ADT7310
204 tristate "Analog Devices ADT7310/ADT7320"
205 depends on SPI_MASTER
206 select SENSORS_ADT7X10
208 If you say yes here you get support for the Analog Devices
209 ADT7310 and ADT7320 temperature monitoring chips.
211 This driver can also be built as a module. If so, the module
212 will be called adt7310.
214 config SENSORS_ADT7410
215 tristate "Analog Devices ADT7410/ADT7420"
217 select SENSORS_ADT7X10
219 If you say yes here you get support for the Analog Devices
220 ADT7410 and ADT7420 temperature monitoring chips.
222 This driver can also be built as a module. If so, the module
223 will be called adt7410.
225 config SENSORS_ADT7411
226 tristate "Analog Devices ADT7411"
229 If you say yes here you get support for the Analog Devices
230 ADT7411 voltage and temperature monitoring chip.
232 This driver can also be built as a module. If so, the module
233 will be called adt7411.
235 config SENSORS_ADT7462
236 tristate "Analog Devices ADT7462"
239 If you say yes here you get support for the Analog Devices
240 ADT7462 temperature monitoring chips.
242 This driver can also be built as a module. If so, the module
243 will be called adt7462.
245 config SENSORS_ADT7470
246 tristate "Analog Devices ADT7470"
249 If you say yes here you get support for the Analog Devices
250 ADT7470 temperature monitoring chips.
252 This driver can also be built as a module. If so, the module
253 will be called adt7470.
255 config SENSORS_ADT7475
256 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
260 If you say yes here you get support for the Analog Devices
261 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
264 This driver can also be build as a module. If so, the module
265 will be called adt7475.
267 config SENSORS_ASC7621
268 tristate "Andigilog aSC7621"
271 If you say yes here you get support for the aSC7621
272 family of SMBus sensors chip found on most Intel X38, X48, X58,
273 945, 965 and 975 desktop boards. Currently supported chips:
277 This driver can also be built as a module. If so, the module
278 will be called asc7621.
280 config SENSORS_K8TEMP
281 tristate "AMD Athlon64/FX or Opteron temperature sensor"
282 depends on X86 && PCI
284 If you say yes here you get support for the temperature
285 sensor(s) inside your CPU. Supported is whole AMD K8
286 microarchitecture. Please note that you will need at least
287 lm-sensors 2.10.1 for proper userspace support.
289 This driver can also be built as a module. If so, the module
290 will be called k8temp.
292 config SENSORS_K10TEMP
293 tristate "AMD Family 10h+ temperature sensor"
294 depends on X86 && PCI
296 If you say yes here you get support for the temperature
297 sensor(s) inside your CPU. Supported are later revisions of
298 the AMD Family 10h and all revisions of the AMD Family 11h,
299 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
302 This driver can also be built as a module. If so, the module
303 will be called k10temp.
305 config SENSORS_FAM15H_POWER
306 tristate "AMD Family 15h processor power"
307 depends on X86 && PCI
309 If you say yes here you get support for processor power
310 information of your AMD family 15h CPU.
312 This driver can also be built as a module. If so, the module
313 will be called fam15h_power.
315 config SENSORS_ASB100
316 tristate "Asus ASB100 Bach"
317 depends on X86 && I2C
320 If you say yes here you get support for the ASB100 Bach sensor
321 chip found on some Asus mainboards.
323 This driver can also be built as a module. If so, the module
324 will be called asb100.
327 tristate "Attansic ATXP1 VID controller"
331 If you say yes here you get support for the Attansic ATXP1 VID
334 If your board have such a chip, you are able to control your CPU
335 core and other voltages.
337 This driver can also be built as a module. If so, the module
338 will be called atxp1.
341 tristate "Dallas Semiconductor DS620"
344 If you say yes here you get support for Dallas Semiconductor
347 This driver can also be built as a module. If so, the module
348 will be called ds620.
350 config SENSORS_DS1621
351 tristate "Dallas Semiconductor DS1621 and compatibles"
354 If you say yes here you get support for Dallas Semiconductor/Maxim
355 Integrated DS1621 sensor chips and compatible models including:
357 - Dallas Semiconductor DS1625
358 - Maxim Integrated DS1631
359 - Maxim Integrated DS1721
360 - Maxim Integrated DS1731
362 This driver can also be built as a module. If so, the module
363 will be called ds1621.
365 config SENSORS_DA9052_ADC
366 tristate "Dialog DA9052/DA9053 ADC"
367 depends on PMIC_DA9052
369 Say y here to support the ADC found on Dialog Semiconductor
370 DA9052-BC and DA9053-AA/Bx PMICs.
372 This driver can also be built as module. If so, the module
373 will be called da9052-hwmon.
375 config SENSORS_DA9055
376 tristate "Dialog Semiconductor DA9055 ADC"
377 depends on MFD_DA9055
379 If you say yes here you get support for ADC on the Dialog
380 Semiconductor DA9055 PMIC.
382 This driver can also be built as a module. If so, the module
383 will be called da9055-hwmon.
385 config SENSORS_I5K_AMB
386 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
389 If you say yes here you get support for FB-DIMM AMB temperature
390 monitoring chips on systems with the Intel 5000 series chipset.
392 This driver can also be built as a module. If so, the module
393 will be called i5k_amb.
395 config SENSORS_F71805F
396 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
399 If you say yes here you get support for hardware monitoring
400 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
403 This driver can also be built as a module. If so, the module
404 will be called f71805f.
406 config SENSORS_F71882FG
407 tristate "Fintek F71882FG and compatibles"
410 If you say yes here you get support for hardware monitoring
411 features of many Fintek Super-I/O (LPC) chips. The currently
425 This driver can also be built as a module. If so, the module
426 will be called f71882fg.
428 config SENSORS_F75375S
429 tristate "Fintek F75375S/SP, F75373 and F75387"
432 If you say yes here you get support for hardware monitoring
433 features of the Fintek F75375S/SP, F75373 and F75387
435 This driver can also be built as a module. If so, the module
436 will be called f75375s.
438 config SENSORS_FSCHMD
439 tristate "Fujitsu Siemens Computers sensor chips"
440 depends on X86 && I2C
442 If you say yes here you get support for the following Fujitsu
443 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
444 Heimdall, Heracles, Hades and Syleus including support for the
447 This is a merged driver for FSC sensor chips replacing the fscpos,
448 fscscy and fscher drivers and adding support for several other FSC
451 This driver can also be built as a module. If so, the module
452 will be called fschmd.
458 If you say yes here you get support for Global Mixed-mode
459 Technology Inc G760A fan speed PWM controller chips.
461 This driver can also be built as a module. If so, the module
462 will be called g760a.
465 tristate "GMT G762 and G763"
468 If you say yes here you get support for Global Mixed-mode
469 Technology Inc G762 and G763 fan speed PWM controller chips.
471 This driver can also be built as a module. If so, the module
474 config SENSORS_GL518SM
475 tristate "Genesys Logic GL518SM"
478 If you say yes here you get support for Genesys Logic GL518SM
481 This driver can also be built as a module. If so, the module
482 will be called gl518sm.
484 config SENSORS_GL520SM
485 tristate "Genesys Logic GL520SM"
489 If you say yes here you get support for Genesys Logic GL520SM
492 This driver can also be built as a module. If so, the module
493 will be called gl520sm.
495 config SENSORS_GPIO_FAN
499 If you say yes here you get support for fans connected to GPIO lines.
501 This driver can also be built as a module. If so, the module
502 will be called gpio-fan.
504 config SENSORS_HIH6130
505 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
508 If you say yes here you get support for Honeywell Humidicon
509 HIH-6130 and HIH-6131 Humidicon humidity sensors.
511 This driver can also be built as a module. If so, the module
512 will be called hih6130.
514 config SENSORS_CORETEMP
515 tristate "Intel Core/Core2/Atom temperature sensor"
518 If you say yes here you get support for the temperature
519 sensor inside your CPU. Most of the family 6 CPUs
520 are supported. Check Documentation/hwmon/coretemp for details.
522 config SENSORS_IBMAEM
523 tristate "IBM Active Energy Manager temperature/power sensors and control"
525 depends on IPMI_HANDLER
527 If you say yes here you get support for the temperature and
528 power sensors and capping hardware in various IBM System X
529 servers that support Active Energy Manager. This includes
530 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
531 and certain HC10/HS2x/LS2x/QS2x blades.
533 This driver can also be built as a module. If so, the module
534 will be called ibmaem.
536 config SENSORS_IBMPEX
537 tristate "IBM PowerExecutive temperature/power sensors"
539 depends on IPMI_HANDLER
541 If you say yes here you get support for the temperature and
542 power sensors in various IBM System X servers that support
543 PowerExecutive. So far this includes the x3350, x3550, x3650,
544 x3655, and x3755; the x3800, x3850, and x3950 models that have
545 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
547 This driver can also be built as a module. If so, the module
548 will be called ibmpex.
550 config SENSORS_IIO_HWMON
551 tristate "Hwmon driver that uses channels specified via iio maps"
554 This is a platform driver that in combination with a suitable
555 map allows IIO devices to provide basic hwmon functionality
556 for those channels specified in the map. This map can be provided
557 either via platform data or the device tree bindings.
560 tristate "ITE IT87xx and compatibles"
564 If you say yes here you get support for ITE IT8705F, IT8712F,
565 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
566 IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
569 This driver can also be built as a module. If so, the module
572 config SENSORS_JZ4740
573 tristate "Ingenic JZ4740 SoC ADC driver"
574 depends on MACH_JZ4740 && MFD_JZ4740_ADC
576 If you say yes here you get support for reading adc values from the ADCIN
577 pin on Ingenic JZ4740 SoC based boards.
579 This driver can also be build as a module. If so, the module will be
583 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
586 If you say yes here, you get support for JEDEC JC42.4 compliant
587 temperature sensors, which are used on many DDR3 memory modules for
588 mobile devices and servers. Support will include, but not be limited
589 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
590 MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
591 STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
593 This driver can also be built as a module. If so, the module
596 config SENSORS_LINEAGE
597 tristate "Lineage Compact Power Line Power Entry Module"
600 If you say yes here you get support for the Lineage Compact Power Line
601 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
602 CP2000DC, CP2725, and others.
604 This driver can also be built as a module. If so, the module
605 will be called lineage-pem.
608 tristate "National Semiconductor LM63 and compatibles"
611 If you say yes here you get support for the National
612 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
613 sensors with integrated fan control. Such chips are found
614 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
617 This driver can also be built as a module. If so, the module
621 tristate "National Semiconductor LM70 and compatibles"
622 depends on SPI_MASTER
624 If you say yes here you get support for the National Semiconductor
625 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
628 This driver can also be built as a module. If so, the module
632 tristate "National Semiconductor LM73"
635 If you say yes here you get support for National Semiconductor LM73
637 This driver can also be built as a module. If so, the module
641 tristate "National Semiconductor LM75 and compatibles"
644 If you say yes here you get support for one common type of
645 temperature sensor chip, with models including:
647 - Analog Devices ADT75
648 - Dallas Semiconductor DS75, DS1775 and DS7505
649 - Maxim MAX6625 and MAX6626
651 - National Semiconductor LM75, LM75A
653 - ST Microelectronics STDS75
654 - TelCom (now Microchip) TCN75
655 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
658 This driver supports driver model based binding through board
659 specific I2C device tables.
661 It also supports the "legacy" style of driver binding. To use
662 that with some chips which don't replicate LM75 quirks exactly,
663 you may need the "force" module parameter.
665 This driver can also be built as a module. If so, the module
669 tristate "National Semiconductor LM77"
672 If you say yes here you get support for National Semiconductor LM77
675 This driver can also be built as a module. If so, the module
679 tristate "National Semiconductor LM78 and compatibles"
683 If you say yes here you get support for National Semiconductor LM78,
686 This driver can also be built as a module. If so, the module
690 tristate "National Semiconductor LM80 and LM96080"
693 If you say yes here you get support for National Semiconductor
694 LM80 and LM96080 sensor chips.
696 This driver can also be built as a module. If so, the module
700 tristate "National Semiconductor LM83 and compatibles"
703 If you say yes here you get support for National Semiconductor
704 LM82 and LM83 sensor chips.
706 This driver can also be built as a module. If so, the module
710 tristate "National Semiconductor LM85 and compatibles"
714 If you say yes here you get support for National Semiconductor LM85
715 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
716 EMC6D101, EMC6D102, and EMC6D103.
718 This driver can also be built as a module. If so, the module
722 tristate "National Semiconductor LM87 and compatibles"
726 If you say yes here you get support for National Semiconductor LM87
727 and Analog Devices ADM1024 sensor chips.
729 This driver can also be built as a module. If so, the module
733 tristate "National Semiconductor LM90 and compatibles"
736 If you say yes here you get support for National Semiconductor LM90,
737 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
738 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
739 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
740 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
743 This driver can also be built as a module. If so, the module
747 tristate "National Semiconductor LM92 and compatibles"
750 If you say yes here you get support for National Semiconductor LM92
751 and Maxim MAX6635 sensor chips.
753 This driver can also be built as a module. If so, the module
757 tristate "National Semiconductor LM93 and compatibles"
761 If you say yes here you get support for National Semiconductor LM93,
762 LM94, and compatible sensor chips.
764 This driver can also be built as a module. If so, the module
767 config SENSORS_LTC4151
768 tristate "Linear Technology LTC4151"
772 If you say yes here you get support for Linear Technology LTC4151
773 High Voltage I2C Current and Voltage Monitor interface.
775 This driver can also be built as a module. If so, the module will
778 config SENSORS_LTC4215
779 tristate "Linear Technology LTC4215"
783 If you say yes here you get support for Linear Technology LTC4215
784 Hot Swap Controller I2C interface.
786 This driver can also be built as a module. If so, the module will
789 config SENSORS_LTC4245
790 tristate "Linear Technology LTC4245"
794 If you say yes here you get support for Linear Technology LTC4245
795 Multiple Supply Hot Swap Controller I2C interface.
797 This driver can also be built as a module. If so, the module will
800 config SENSORS_LTC4261
801 tristate "Linear Technology LTC4261"
805 If you say yes here you get support for Linear Technology LTC4261
806 Negative Voltage Hot Swap Controller I2C interface.
808 This driver can also be built as a module. If so, the module will
811 config SENSORS_LM95234
812 tristate "National Semiconductor LM95234"
815 If you say yes here you get support for the LM95234 temperature
818 This driver can also be built as a module. If so, the module
819 will be called lm95234.
821 config SENSORS_LM95241
822 tristate "National Semiconductor LM95241 and compatibles"
825 If you say yes here you get support for LM95231 and LM95241 sensor
828 This driver can also be built as a module. If so, the module
829 will be called lm95241.
831 config SENSORS_LM95245
832 tristate "National Semiconductor LM95245 sensor chip"
835 If you say yes here you get support for LM95245 sensor chip.
837 This driver can also be built as a module. If so, the module
838 will be called lm95245.
840 config SENSORS_MAX1111
841 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
842 depends on SPI_MASTER
844 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
847 This driver can also be built as a module. If so, the module
848 will be called max1111.
850 config SENSORS_MAX16065
851 tristate "Maxim MAX16065 System Manager and compatibles"
854 If you say yes here you get support for hardware monitoring
855 capabilities of the following Maxim System Manager chips.
863 This driver can also be built as a module. If so, the module
864 will be called max16065.
866 config SENSORS_MAX1619
867 tristate "Maxim MAX1619 sensor chip"
870 If you say yes here you get support for MAX1619 sensor chip.
872 This driver can also be built as a module. If so, the module
873 will be called max1619.
875 config SENSORS_MAX1668
876 tristate "Maxim MAX1668 and compatibles"
879 If you say yes here you get support for MAX1668, MAX1989 and
882 This driver can also be built as a module. If so, the module
883 will be called max1668.
885 config SENSORS_MAX197
886 tristate "Maxim MAX197 and compatibles"
888 Support for the Maxim MAX197 A/D converter.
889 Support will include, but not be limited to, MAX197, and MAX199.
891 This driver can also be built as a module. If so, the module
892 will be called max197.
894 config SENSORS_MAX6639
895 tristate "Maxim MAX6639 sensor chip"
898 If you say yes here you get support for the MAX6639
901 This driver can also be built as a module. If so, the module
902 will be called max6639.
904 config SENSORS_MAX6642
905 tristate "Maxim MAX6642 sensor chip"
908 If you say yes here you get support for MAX6642 sensor chip.
909 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
910 with Overtemperature Alarm from Maxim.
912 This driver can also be built as a module. If so, the module
913 will be called max6642.
915 config SENSORS_MAX6650
916 tristate "Maxim MAX6650 sensor chip"
919 If you say yes here you get support for the MAX6650 / MAX6651
922 This driver can also be built as a module. If so, the module
923 will be called max6650.
925 config SENSORS_MAX6697
926 tristate "Maxim MAX6697 and compatibles"
929 If you say yes here you get support for MAX6581, MAX6602, MAX6622,
930 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
931 temperature sensor chips.
933 This driver can also be built as a module. If so, the module
934 will be called max6697.
936 config SENSORS_MCP3021
937 tristate "Microchip MCP3021 and compatibles"
940 If you say yes here you get support for MCP3021 and MCP3221.
941 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
942 with 12-bit resolution.
944 This driver can also be built as a module. If so, the module
945 will be called mcp3021.
947 config SENSORS_NCT6775
948 tristate "Nuvoton NCT6775F and compatibles"
952 If you say yes here you get support for the hardware monitoring
953 functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
954 and compatible Super-I/O chips. This driver replaces the
955 w83627ehf driver for NCT6775F and NCT6776F.
957 This driver can also be built as a module. If so, the module
958 will be called nct6775.
960 config SENSORS_NTC_THERMISTOR
961 tristate "NTC thermistor support"
962 depends on (!OF && !IIO) || (OF && IIO)
964 This driver supports NTC thermistors sensor reading and its
965 interpretation. The driver can also monitor the temperature and
966 send notifications about the temperature.
968 Currently, this driver supports
969 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
971 This driver can also be built as a module. If so, the module
972 will be called ntc-thermistor.
974 config SENSORS_PC87360
975 tristate "National Semiconductor PC87360 family"
979 If you say yes here you get access to the hardware monitoring
980 functions of the National Semiconductor PC8736x Super-I/O chips.
981 The PC87360, PC87363 and PC87364 only have fan monitoring and
982 control. The PC87365 and PC87366 additionally have voltage and
983 temperature monitoring.
985 This driver can also be built as a module. If so, the module
986 will be called pc87360.
988 config SENSORS_PC87427
989 tristate "National Semiconductor PC87427"
992 If you say yes here you get access to the hardware monitoring
993 functions of the National Semiconductor PC87427 Super-I/O chip.
994 The chip has two distinct logical devices, one for fan speed
995 monitoring and control, and one for voltage and temperature
996 monitoring. Fan speed monitoring and control are supported, as
997 well as temperature monitoring. Voltages aren't supported yet.
999 This driver can also be built as a module. If so, the module
1000 will be called pc87427.
1002 config SENSORS_PCF8591
1003 tristate "Philips PCF8591 ADC/DAC"
1007 If you say yes here you get support for Philips PCF8591 4-channel
1008 ADC, 1-channel DAC chips.
1010 This driver can also be built as a module. If so, the module
1011 will be called pcf8591.
1013 These devices are hard to detect and rarely found on mainstream
1014 hardware. If unsure, say N.
1016 source drivers/hwmon/pmbus/Kconfig
1018 config SENSORS_SHT15
1019 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1022 If you say yes here you get support for the Sensiron SHT10, SHT11,
1023 SHT15, SHT71, SHT75 humidity and temperature sensors.
1025 This driver can also be built as a module. If so, the module
1026 will be called sht15.
1028 config SENSORS_SHT21
1029 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1032 If you say yes here you get support for the Sensiron SHT21, SHT25
1033 humidity and temperature sensors.
1035 This driver can also be built as a module. If so, the module
1036 will be called sht21.
1039 tristate "Samsung built-in ADC"
1042 If you say yes here you get support for the on-board ADCs of
1043 the Samsung S3C24XX, S3C64XX and other series of SoC
1045 This driver can also be built as a module. If so, the module
1046 will be called s3c-hwmon.
1048 config SENSORS_S3C_RAW
1049 bool "Include raw channel attributes in sysfs"
1050 depends on SENSORS_S3C
1052 Say Y here if you want to include raw copies of all the ADC
1055 config SENSORS_SIS5595
1056 tristate "Silicon Integrated Systems Corp. SiS5595"
1059 If you say yes here you get support for the integrated sensors in
1060 SiS5595 South Bridges.
1062 This driver can also be built as a module. If so, the module
1063 will be called sis5595.
1065 config SENSORS_SMM665
1066 tristate "Summit Microelectronics SMM665"
1070 If you say yes here you get support for the hardware monitoring
1071 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1072 Active DC Output Controller / Monitor.
1074 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1075 Support for those chips is untested.
1077 This driver can also be built as a module. If so, the module will
1080 config SENSORS_DME1737
1081 tristate "SMSC DME1737, SCH311x and compatibles"
1082 depends on I2C && !PPC
1085 If you say yes here you get support for the hardware monitoring
1086 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1087 Asus A8000 Super-I/O chips.
1089 This driver can also be built as a module. If so, the module
1090 will be called dme1737.
1092 config SENSORS_EMC1403
1093 tristate "SMSC EMC1403/23 thermal sensor"
1096 If you say yes here you get support for the SMSC EMC1403/23
1097 temperature monitoring chip.
1099 Threshold values can be configured using sysfs.
1100 Data from the different diodes are accessible via sysfs.
1102 config SENSORS_EMC2103
1103 tristate "SMSC EMC2103"
1106 If you say yes here you get support for the temperature
1107 and fan sensors of the SMSC EMC2103 chips.
1109 This driver can also be built as a module. If so, the module
1110 will be called emc2103.
1112 config SENSORS_EMC6W201
1113 tristate "SMSC EMC6W201"
1116 If you say yes here you get support for the SMSC EMC6W201
1117 hardware monitoring chip.
1119 This driver can also be built as a module. If so, the module
1120 will be called emc6w201.
1122 config SENSORS_SMSC47M1
1123 tristate "SMSC LPC47M10x and compatibles"
1126 If you say yes here you get support for the integrated fan
1127 monitoring and control capabilities of the SMSC LPC47B27x,
1128 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1129 LPC47M192, LPC47M292 and LPC47M997 chips.
1131 The temperature and voltage sensor features of the LPC47M15x,
1132 LPC47M192, LPC47M292 and LPC47M997 are supported by another
1133 driver, select also "SMSC LPC47M192 and compatibles" below for
1136 This driver can also be built as a module. If so, the module
1137 will be called smsc47m1.
1139 config SENSORS_SMSC47M192
1140 tristate "SMSC LPC47M192 and compatibles"
1144 If you say yes here you get support for the temperature and
1145 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1146 and LPC47M997 chips.
1148 The fan monitoring and control capabilities of these chips
1149 are supported by another driver, select
1150 "SMSC LPC47M10x and compatibles" above. You need both drivers
1151 if you want fan control and voltage/temperature sensor support.
1153 This driver can also be built as a module. If so, the module
1154 will be called smsc47m192.
1156 config SENSORS_SMSC47B397
1157 tristate "SMSC LPC47B397-NC"
1160 If you say yes here you get support for the SMSC LPC47B397-NC
1163 This driver can also be built as a module. If so, the module
1164 will be called smsc47b397.
1166 config SENSORS_SCH56XX_COMMON
1170 config SENSORS_SCH5627
1171 tristate "SMSC SCH5627"
1172 depends on !PPC && WATCHDOG
1173 select SENSORS_SCH56XX_COMMON
1174 select WATCHDOG_CORE
1176 If you say yes here you get support for the hardware monitoring
1177 features of the SMSC SCH5627 Super-I/O chip including support for
1178 the integrated watchdog.
1180 This driver can also be built as a module. If so, the module
1181 will be called sch5627.
1183 config SENSORS_SCH5636
1184 tristate "SMSC SCH5636"
1185 depends on !PPC && WATCHDOG
1186 select SENSORS_SCH56XX_COMMON
1187 select WATCHDOG_CORE
1189 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1190 hardware monitoring solutions, allowing motherboard manufacturers to
1191 create their own custom hwmon solution based upon the SCH5636.
1193 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1194 hwmon solution. Say yes here if you want support for the Fujitsu
1195 Theseus' hardware monitoring features including support for the
1196 integrated watchdog.
1198 This driver can also be built as a module. If so, the module
1199 will be called sch5636.
1201 config SENSORS_ADS1015
1202 tristate "Texas Instruments ADS1015"
1205 If you say yes here you get support for Texas Instruments ADS1015
1206 12-bit 4-input ADC device.
1208 This driver can also be built as a module. If so, the module
1209 will be called ads1015.
1211 config SENSORS_ADS7828
1212 tristate "Texas Instruments ADS7828 and compatibles"
1215 If you say yes here you get support for Texas Instruments ADS7828 and
1216 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1217 it is 8-bit on ADS7830.
1219 This driver can also be built as a module. If so, the module
1220 will be called ads7828.
1222 config SENSORS_ADS7871
1223 tristate "Texas Instruments ADS7871 A/D converter"
1226 If you say yes here you get support for TI ADS7871 & ADS7870
1228 This driver can also be built as a module. If so, the module
1229 will be called ads7871.
1231 config SENSORS_AMC6821
1232 tristate "Texas Instruments AMC6821"
1235 If you say yes here you get support for the Texas Instruments
1236 AMC6821 hardware monitoring chips.
1238 This driver can also be build as a module. If so, the module
1239 will be called amc6821.
1241 config SENSORS_INA209
1242 tristate "TI / Burr Brown INA209"
1245 If you say yes here you get support for the TI / Burr Brown INA209
1246 voltage / current / power monitor I2C interface.
1248 This driver can also be built as a module. If so, the module will
1251 config SENSORS_INA2XX
1252 tristate "Texas Instruments INA219 and compatibles"
1255 If you say yes here you get support for INA219, INA220, INA226, and
1256 INA230 power monitor chips.
1258 The INA2xx driver is configured for the default configuration of
1259 the part as described in the datasheet.
1260 Default value for Rshunt is 10 mOhms.
1261 This driver can also be built as a module. If so, the module
1262 will be called ina2xx.
1264 config SENSORS_THMC50
1265 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1268 If you say yes here you get support for Texas Instruments THMC50
1269 sensor chips and clones: the Analog Devices ADM1022.
1271 This driver can also be built as a module. If so, the module
1272 will be called thmc50.
1274 config SENSORS_TMP102
1275 tristate "Texas Instruments TMP102"
1278 If you say yes here you get support for Texas Instruments TMP102
1281 This driver can also be built as a module. If so, the module
1282 will be called tmp102.
1284 config SENSORS_TMP401
1285 tristate "Texas Instruments TMP401 and compatibles"
1288 If you say yes here you get support for Texas Instruments TMP401,
1289 TMP411, TMP431, and TMP432 temperature sensor chips.
1291 This driver can also be built as a module. If so, the module
1292 will be called tmp401.
1294 config SENSORS_TMP421
1295 tristate "Texas Instruments TMP421 and compatible"
1298 If you say yes here you get support for Texas Instruments TMP421,
1299 TMP422 and TMP423 temperature sensor chips.
1301 This driver can also be built as a module. If so, the module
1302 will be called tmp421.
1304 config SENSORS_TWL4030_MADC
1305 tristate "Texas Instruments TWL4030 MADC Hwmon"
1306 depends on TWL4030_MADC
1308 If you say yes here you get hwmon support for triton
1311 This driver can also be built as a module. If so it will be called
1314 config SENSORS_VEXPRESS
1315 tristate "Versatile Express"
1316 depends on VEXPRESS_CONFIG
1318 This driver provides support for hardware sensors available on
1319 the ARM Ltd's Versatile Express platform. It can provide wide
1320 range of information like temperature, power, energy.
1322 config SENSORS_VIA_CPUTEMP
1323 tristate "VIA CPU temperature sensor"
1327 If you say yes here you get support for the temperature
1328 sensor inside your CPU. Supported are all known variants of
1329 the VIA C7 and Nano.
1331 config SENSORS_VIA686A
1335 If you say yes here you get support for the integrated sensors in
1336 Via 686A/B South Bridges.
1338 This driver can also be built as a module. If so, the module
1339 will be called via686a.
1341 config SENSORS_VT1211
1342 tristate "VIA VT1211"
1346 If you say yes here then you get support for hardware monitoring
1347 features of the VIA VT1211 Super-I/O chip.
1349 This driver can also be built as a module. If so, the module
1350 will be called vt1211.
1352 config SENSORS_VT8231
1353 tristate "VIA VT8231"
1357 If you say yes here then you get support for the integrated sensors
1358 in the VIA VT8231 device.
1360 This driver can also be built as a module. If so, the module
1361 will be called vt8231.
1363 config SENSORS_W83781D
1364 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1368 If you say yes here you get support for the Winbond W8378x series
1369 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1372 This driver can also be built as a module. If so, the module
1373 will be called w83781d.
1375 config SENSORS_W83791D
1376 tristate "Winbond W83791D"
1380 If you say yes here you get support for the Winbond W83791D chip.
1382 This driver can also be built as a module. If so, the module
1383 will be called w83791d.
1385 config SENSORS_W83792D
1386 tristate "Winbond W83792D"
1389 If you say yes here you get support for the Winbond W83792D chip.
1391 This driver can also be built as a module. If so, the module
1392 will be called w83792d.
1394 config SENSORS_W83793
1395 tristate "Winbond W83793"
1399 If you say yes here you get support for the Winbond W83793
1400 hardware monitoring chip, including support for the integrated
1403 This driver can also be built as a module. If so, the module
1404 will be called w83793.
1406 config SENSORS_W83795
1407 tristate "Winbond/Nuvoton W83795G/ADG"
1410 If you say yes here you get support for the Winbond W83795G and
1411 W83795ADG hardware monitoring chip, including manual fan speed
1414 This driver can also be built as a module. If so, the module
1415 will be called w83795.
1417 config SENSORS_W83795_FANCTRL
1418 boolean "Include automatic fan control support (DANGEROUS)"
1419 depends on SENSORS_W83795
1422 If you say yes here, support for automatic fan speed control
1423 will be included in the driver.
1425 This part of the code wasn't carefully reviewed and tested yet,
1426 so enabling this option is strongly discouraged on production
1427 servers. Only developers and testers should enable it for the
1430 Please also note that this option will create sysfs attribute
1431 files which may change in the future, so you shouldn't rely
1432 on them being stable.
1434 config SENSORS_W83L785TS
1435 tristate "Winbond W83L785TS-S"
1438 If you say yes here you get support for the Winbond W83L785TS-S
1439 sensor chip, which is used on the Asus A7N8X, among other
1442 This driver can also be built as a module. If so, the module
1443 will be called w83l785ts.
1445 config SENSORS_W83L786NG
1446 tristate "Winbond W83L786NG, W83L786NR"
1449 If you say yes here you get support for the Winbond W83L786NG
1450 and W83L786NR sensor chips.
1452 This driver can also be built as a module. If so, the module
1453 will be called w83l786ng.
1455 config SENSORS_W83627HF
1456 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1460 If you say yes here you get support for the Winbond W836X7 series
1461 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1464 This driver can also be built as a module. If so, the module
1465 will be called w83627hf.
1467 config SENSORS_W83627EHF
1468 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1472 If you say yes here you get support for the hardware
1473 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1475 This driver also supports the W83627EHG, which is the lead-free
1476 version of the W83627EHF, and the W83627DHG, which is a similar
1477 chip suited for specific Intel processors that use PECI such as
1478 the Core 2 Duo. And also the W83627UHG, which is a stripped down
1479 version of the W83627DHG (as far as hardware monitoring goes.)
1481 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1482 (also known as W83667HG-I), and NCT6776F.
1484 This driver can also be built as a module. If so, the module
1485 will be called w83627ehf.
1487 config SENSORS_WM831X
1488 tristate "WM831x PMICs"
1489 depends on MFD_WM831X
1491 If you say yes here you get support for the hardware
1492 monitoring functionality of the Wolfson Microelectronics
1493 WM831x series of PMICs.
1495 This driver can also be built as a module. If so, the module
1496 will be called wm831x-hwmon.
1498 config SENSORS_WM8350
1499 tristate "Wolfson Microelectronics WM835x"
1500 depends on MFD_WM8350
1502 If you say yes here you get support for the hardware
1503 monitoring features of the WM835x series of PMICs.
1505 This driver can also be built as a module. If so, the module
1506 will be called wm8350-hwmon.
1508 config SENSORS_ULTRA45
1509 tristate "Sun Ultra45 PIC16F747"
1512 This driver provides support for the Ultra45 workstation environmental
1515 config SENSORS_APPLESMC
1516 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1517 depends on INPUT && X86
1520 select INPUT_POLLDEV
1523 This driver provides support for the Apple System Management
1524 Controller, which provides an accelerometer (Apple Sudden Motion
1525 Sensor), light sensors, temperature sensors, keyboard backlight
1526 control and fan control.
1528 Only Intel-based Apple's computers are supported (MacBook Pro,
1531 Data from the different sensors, keyboard backlight control and fan
1532 control are accessible via sysfs.
1534 This driver also provides an absolute input class device, allowing
1535 the laptop to act as a pinball machine-esque joystick.
1537 Say Y here if you have an applicable laptop and want to experience
1538 the awesome power of applesmc.
1540 config SENSORS_MC13783_ADC
1541 tristate "Freescale MC13783/MC13892 ADC"
1542 depends on MFD_MC13XXX
1544 Support for the A/D converter on MC13783 and MC13892 PMIC.
1548 comment "ACPI drivers"
1550 config SENSORS_ACPI_POWER
1551 tristate "ACPI 4.0 power meter"
1553 This driver exposes ACPI 4.0 power meters as hardware monitoring
1554 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
1557 To compile this driver as a module, choose M here:
1558 the module will be called acpi_power_meter.
1560 config SENSORS_ATK0110
1561 tristate "ASUS ATK0110"
1564 If you say yes here you get support for the ACPI hardware
1565 monitoring interface found in many ASUS motherboards. This
1566 driver will provide readings of fans, voltages and temperatures
1567 through the system firmware.
1569 This driver can also be built as a module. If so, the module
1570 will be called asus_atk0110.