2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
43 tristate "AB8500 thermal monitoring"
44 depends on AB8500_GPADC && AB8500_BM
47 If you say yes here you get support for the thermal sensor part
48 of the AB8500 chip. The driver includes thermal management for
49 AB8500 die and two GPADC channels. The GPADC channel are preferably
50 used to access sensors outside the AB8500 chip.
52 This driver can also be built as a module. If so, the module
53 will be called abx500-temp.
55 config SENSORS_ABITUGURU
56 tristate "Abit uGuru (rev 1 & 2)"
59 If you say yes here you get support for the sensor part of the first
60 and second revision of the Abit uGuru chip. The voltage and frequency
61 control parts of the Abit uGuru are not supported. The Abit uGuru
62 chip can be found on Abit uGuru featuring motherboards (most modern
63 Abit motherboards from before end 2005). For more info and a list
64 of which motherboards have which revision see
65 Documentation/hwmon/abituguru
67 This driver can also be built as a module. If so, the module
68 will be called abituguru.
70 config SENSORS_ABITUGURU3
71 tristate "Abit uGuru (rev 3)"
74 If you say yes here you get support for the sensor part of the
75 third revision of the Abit uGuru chip. Only reading the sensors
76 and their settings is supported. The third revision of the Abit
77 uGuru chip can be found on recent Abit motherboards (since end
78 2005). For more info and a list of which motherboards have which
79 revision see Documentation/hwmon/abituguru3
81 This driver can also be built as a module. If so, the module
82 will be called abituguru3.
85 tristate "Analog Devices AD7314 and compatibles"
88 If you say yes here you get support for the Analog Devices
89 AD7314, ADT7301 and ADT7302 temperature sensors.
91 This driver can also be built as a module. If so, the module
92 will be called ad7314.
95 tristate "Analog Devices AD7414"
98 If you say yes here you get support for the Analog Devices
99 AD7414 temperature monitoring chip.
101 This driver can also be built as a module. If so, the module
102 will be called ad7414.
104 config SENSORS_AD7418
105 tristate "Analog Devices AD7416, AD7417 and AD7418"
108 If you say yes here you get support for the Analog Devices
109 AD7416, AD7417 and AD7418 temperature monitoring chips.
111 This driver can also be built as a module. If so, the module
112 will be called ad7418.
115 tristate "National Semiconductor ADCxxxSxxx"
116 depends on SPI_MASTER
118 If you say yes here you get support for the National Semiconductor
119 ADC<bb><c>S<sss> chip family, where
120 * bb is the resolution in number of bits (8, 10, 12)
121 * c is the number of channels (1, 2, 4, 8)
122 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
123 kSPS and 101 for 1 MSPS)
125 Examples : ADC081S101, ADC124S501, ...
127 This driver can also be built as a module. If so, the module
128 will be called adcxx.
130 config SENSORS_ADM1021
131 tristate "Analog Devices ADM1021 and compatibles"
134 If you say yes here you get support for Analog Devices ADM1021
135 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
136 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
138 This driver can also be built as a module. If so, the module
139 will be called adm1021.
141 config SENSORS_ADM1025
142 tristate "Analog Devices ADM1025 and compatibles"
146 If you say yes here you get support for Analog Devices ADM1025
147 and Philips NE1619 sensor chips.
149 This driver can also be built as a module. If so, the module
150 will be called adm1025.
152 config SENSORS_ADM1026
153 tristate "Analog Devices ADM1026 and compatibles"
157 If you say yes here you get support for Analog Devices ADM1026
160 This driver can also be built as a module. If so, the module
161 will be called adm1026.
163 config SENSORS_ADM1029
164 tristate "Analog Devices ADM1029"
167 If you say yes here you get support for Analog Devices ADM1029
169 Very rare chip, please let us know you use it.
171 This driver can also be built as a module. If so, the module
172 will be called adm1029.
174 config SENSORS_ADM1031
175 tristate "Analog Devices ADM1031 and compatibles"
178 If you say yes here you get support for Analog Devices ADM1031
179 and ADM1030 sensor chips.
181 This driver can also be built as a module. If so, the module
182 will be called adm1031.
184 config SENSORS_ADM9240
185 tristate "Analog Devices ADM9240 and compatibles"
189 If you say yes here you get support for Analog Devices ADM9240,
190 Dallas DS1780, National Semiconductor LM81 sensor chips.
192 This driver can also be built as a module. If so, the module
193 will be called adm9240.
195 config SENSORS_ADT7X10
198 This module contains common code shared by the ADT7310/ADT7320 and
199 ADT7410/ADT7420 temperature monitoring chip drivers.
201 If build as a module, the module will be called adt7x10.
203 config SENSORS_ADT7310
204 tristate "Analog Devices ADT7310/ADT7320"
205 depends on SPI_MASTER
206 select SENSORS_ADT7X10
208 If you say yes here you get support for the Analog Devices
209 ADT7310 and ADT7320 temperature monitoring chips.
211 This driver can also be built as a module. If so, the module
212 will be called adt7310.
214 config SENSORS_ADT7410
215 tristate "Analog Devices ADT7410/ADT7420"
217 select SENSORS_ADT7X10
219 If you say yes here you get support for the Analog Devices
220 ADT7410 and ADT7420 temperature monitoring chips.
222 This driver can also be built as a module. If so, the module
223 will be called adt7410.
225 config SENSORS_ADT7411
226 tristate "Analog Devices ADT7411"
229 If you say yes here you get support for the Analog Devices
230 ADT7411 voltage and temperature monitoring chip.
232 This driver can also be built as a module. If so, the module
233 will be called adt7411.
235 config SENSORS_ADT7462
236 tristate "Analog Devices ADT7462"
239 If you say yes here you get support for the Analog Devices
240 ADT7462 temperature monitoring chips.
242 This driver can also be built as a module. If so, the module
243 will be called adt7462.
245 config SENSORS_ADT7470
246 tristate "Analog Devices ADT7470"
249 If you say yes here you get support for the Analog Devices
250 ADT7470 temperature monitoring chips.
252 This driver can also be built as a module. If so, the module
253 will be called adt7470.
255 config SENSORS_ADT7475
256 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
260 If you say yes here you get support for the Analog Devices
261 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
264 This driver can also be build as a module. If so, the module
265 will be called adt7475.
267 config SENSORS_ASC7621
268 tristate "Andigilog aSC7621"
271 If you say yes here you get support for the aSC7621
272 family of SMBus sensors chip found on most Intel X38, X48, X58,
273 945, 965 and 975 desktop boards. Currently supported chips:
277 This driver can also be built as a module. If so, the module
278 will be called asc7621.
280 config SENSORS_K8TEMP
281 tristate "AMD Athlon64/FX or Opteron temperature sensor"
282 depends on X86 && PCI
284 If you say yes here you get support for the temperature
285 sensor(s) inside your CPU. Supported is whole AMD K8
286 microarchitecture. Please note that you will need at least
287 lm-sensors 2.10.1 for proper userspace support.
289 This driver can also be built as a module. If so, the module
290 will be called k8temp.
292 config SENSORS_K10TEMP
293 tristate "AMD Family 10h+ temperature sensor"
294 depends on X86 && PCI
296 If you say yes here you get support for the temperature
297 sensor(s) inside your CPU. Supported are later revisions of
298 the AMD Family 10h and all revisions of the AMD Family 11h,
299 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
300 16h (Kabini) microarchitectures.
302 This driver can also be built as a module. If so, the module
303 will be called k10temp.
305 config SENSORS_FAM15H_POWER
306 tristate "AMD Family 15h processor power"
307 depends on X86 && PCI
309 If you say yes here you get support for processor power
310 information of your AMD family 15h CPU.
312 This driver can also be built as a module. If so, the module
313 will be called fam15h_power.
315 config SENSORS_ASB100
316 tristate "Asus ASB100 Bach"
317 depends on X86 && I2C
320 If you say yes here you get support for the ASB100 Bach sensor
321 chip found on some Asus mainboards.
323 This driver can also be built as a module. If so, the module
324 will be called asb100.
327 tristate "Attansic ATXP1 VID controller"
331 If you say yes here you get support for the Attansic ATXP1 VID
334 If your board have such a chip, you are able to control your CPU
335 core and other voltages.
337 This driver can also be built as a module. If so, the module
338 will be called atxp1.
341 tristate "Dallas Semiconductor DS620"
344 If you say yes here you get support for Dallas Semiconductor
347 This driver can also be built as a module. If so, the module
348 will be called ds620.
350 config SENSORS_DS1621
351 tristate "Dallas Semiconductor DS1621 and compatibles"
354 If you say yes here you get support for Dallas Semiconductor/Maxim
355 Integrated DS1621 sensor chips and compatible models including:
357 - Dallas Semiconductor DS1625
358 - Maxim Integrated DS1631
359 - Maxim Integrated DS1721
360 - Maxim Integrated DS1731
362 This driver can also be built as a module. If so, the module
363 will be called ds1621.
365 config SENSORS_DA9052_ADC
366 tristate "Dialog DA9052/DA9053 ADC"
367 depends on PMIC_DA9052
369 Say y here to support the ADC found on Dialog Semiconductor
370 DA9052-BC and DA9053-AA/Bx PMICs.
372 This driver can also be built as module. If so, the module
373 will be called da9052-hwmon.
375 config SENSORS_DA9055
376 tristate "Dialog Semiconductor DA9055 ADC"
377 depends on MFD_DA9055
379 If you say yes here you get support for ADC on the Dialog
380 Semiconductor DA9055 PMIC.
382 This driver can also be built as a module. If so, the module
383 will be called da9055-hwmon.
385 config SENSORS_I5K_AMB
386 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
389 If you say yes here you get support for FB-DIMM AMB temperature
390 monitoring chips on systems with the Intel 5000 series chipset.
392 This driver can also be built as a module. If so, the module
393 will be called i5k_amb.
395 config SENSORS_F71805F
396 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
399 If you say yes here you get support for hardware monitoring
400 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
403 This driver can also be built as a module. If so, the module
404 will be called f71805f.
406 config SENSORS_F71882FG
407 tristate "Fintek F71882FG and compatibles"
410 If you say yes here you get support for hardware monitoring
411 features of many Fintek Super-I/O (LPC) chips. The currently
425 This driver can also be built as a module. If so, the module
426 will be called f71882fg.
428 config SENSORS_F75375S
429 tristate "Fintek F75375S/SP, F75373 and F75387"
432 If you say yes here you get support for hardware monitoring
433 features of the Fintek F75375S/SP, F75373 and F75387
435 This driver can also be built as a module. If so, the module
436 will be called f75375s.
438 config SENSORS_FSCHMD
439 tristate "Fujitsu Siemens Computers sensor chips"
440 depends on X86 && I2C
442 If you say yes here you get support for the following Fujitsu
443 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
444 Heimdall, Heracles, Hades and Syleus including support for the
447 This is a merged driver for FSC sensor chips replacing the fscpos,
448 fscscy and fscher drivers and adding support for several other FSC
451 This driver can also be built as a module. If so, the module
452 will be called fschmd.
458 If you say yes here you get support for Global Mixed-mode
459 Technology Inc G760A fan speed PWM controller chips.
461 This driver can also be built as a module. If so, the module
462 will be called g760a.
465 tristate "GMT G762 and G763"
468 If you say yes here you get support for Global Mixed-mode
469 Technology Inc G762 and G763 fan speed PWM controller chips.
471 This driver can also be built as a module. If so, the module
474 config SENSORS_GL518SM
475 tristate "Genesys Logic GL518SM"
478 If you say yes here you get support for Genesys Logic GL518SM
481 This driver can also be built as a module. If so, the module
482 will be called gl518sm.
484 config SENSORS_GL520SM
485 tristate "Genesys Logic GL520SM"
489 If you say yes here you get support for Genesys Logic GL520SM
492 This driver can also be built as a module. If so, the module
493 will be called gl520sm.
495 config SENSORS_GPIO_FAN
499 If you say yes here you get support for fans connected to GPIO lines.
501 This driver can also be built as a module. If so, the module
502 will be called gpio-fan.
504 config SENSORS_HIH6130
505 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
508 If you say yes here you get support for Honeywell Humidicon
509 HIH-6130 and HIH-6131 Humidicon humidity sensors.
511 This driver can also be built as a module. If so, the module
512 will be called hih6130.
515 tristate "Measurement Specialties HTU21D humidity/temperature sensors"
518 If you say yes here you get support for the Measurement Specialties
519 HTU21D humidity and temperature sensors.
521 This driver can also be built as a module. If so, the module
522 will be called htu21.
524 config SENSORS_CORETEMP
525 tristate "Intel Core/Core2/Atom temperature sensor"
528 If you say yes here you get support for the temperature
529 sensor inside your CPU. Most of the family 6 CPUs
530 are supported. Check Documentation/hwmon/coretemp for details.
532 config SENSORS_IBMAEM
533 tristate "IBM Active Energy Manager temperature/power sensors and control"
535 depends on IPMI_HANDLER
537 If you say yes here you get support for the temperature and
538 power sensors and capping hardware in various IBM System X
539 servers that support Active Energy Manager. This includes
540 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
541 and certain HC10/HS2x/LS2x/QS2x blades.
543 This driver can also be built as a module. If so, the module
544 will be called ibmaem.
546 config SENSORS_IBMPEX
547 tristate "IBM PowerExecutive temperature/power sensors"
549 depends on IPMI_HANDLER
551 If you say yes here you get support for the temperature and
552 power sensors in various IBM System X servers that support
553 PowerExecutive. So far this includes the x3350, x3550, x3650,
554 x3655, and x3755; the x3800, x3850, and x3950 models that have
555 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
557 This driver can also be built as a module. If so, the module
558 will be called ibmpex.
560 config SENSORS_IIO_HWMON
561 tristate "Hwmon driver that uses channels specified via iio maps"
564 This is a platform driver that in combination with a suitable
565 map allows IIO devices to provide basic hwmon functionality
566 for those channels specified in the map. This map can be provided
567 either via platform data or the device tree bindings.
570 tristate "ITE IT87xx and compatibles"
574 If you say yes here you get support for ITE IT8705F, IT8712F,
575 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
576 IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips,
577 and the SiS950 clone.
579 This driver can also be built as a module. If so, the module
582 config SENSORS_JZ4740
583 tristate "Ingenic JZ4740 SoC ADC driver"
584 depends on MACH_JZ4740 && MFD_JZ4740_ADC
586 If you say yes here you get support for reading adc values from the ADCIN
587 pin on Ingenic JZ4740 SoC based boards.
589 This driver can also be build as a module. If so, the module will be
593 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
596 If you say yes here, you get support for JEDEC JC42.4 compliant
597 temperature sensors, which are used on many DDR3 memory modules for
598 mobile devices and servers. Support will include, but not be limited
599 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
600 MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
601 STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
603 This driver can also be built as a module. If so, the module
606 config SENSORS_LINEAGE
607 tristate "Lineage Compact Power Line Power Entry Module"
610 If you say yes here you get support for the Lineage Compact Power Line
611 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
612 CP2000DC, CP2725, and others.
614 This driver can also be built as a module. If so, the module
615 will be called lineage-pem.
618 tristate "National Semiconductor LM63 and compatibles"
621 If you say yes here you get support for the National
622 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
623 sensors with integrated fan control. Such chips are found
624 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
627 This driver can also be built as a module. If so, the module
631 tristate "National Semiconductor LM70 and compatibles"
632 depends on SPI_MASTER
634 If you say yes here you get support for the National Semiconductor
635 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
638 This driver can also be built as a module. If so, the module
642 tristate "National Semiconductor LM73"
645 If you say yes here you get support for National Semiconductor LM73
647 This driver can also be built as a module. If so, the module
651 tristate "National Semiconductor LM75 and compatibles"
653 depends on THERMAL || !THERMAL_OF
655 If you say yes here you get support for one common type of
656 temperature sensor chip, with models including:
658 - Analog Devices ADT75
659 - Dallas Semiconductor DS75, DS1775 and DS7505
660 - Global Mixed-mode Technology (GMT) G751
661 - Maxim MAX6625 and MAX6626
663 - National Semiconductor LM75, LM75A
665 - ST Microelectronics STDS75
666 - TelCom (now Microchip) TCN75
667 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
670 This driver supports driver model based binding through board
671 specific I2C device tables.
673 It also supports the "legacy" style of driver binding. To use
674 that with some chips which don't replicate LM75 quirks exactly,
675 you may need the "force" module parameter.
677 This driver can also be built as a module. If so, the module
681 tristate "National Semiconductor LM77"
684 If you say yes here you get support for National Semiconductor LM77
687 This driver can also be built as a module. If so, the module
691 tristate "National Semiconductor LM78 and compatibles"
695 If you say yes here you get support for National Semiconductor LM78,
698 This driver can also be built as a module. If so, the module
702 tristate "National Semiconductor LM80 and LM96080"
705 If you say yes here you get support for National Semiconductor
706 LM80 and LM96080 sensor chips.
708 This driver can also be built as a module. If so, the module
712 tristate "National Semiconductor LM83 and compatibles"
715 If you say yes here you get support for National Semiconductor
716 LM82 and LM83 sensor chips.
718 This driver can also be built as a module. If so, the module
722 tristate "National Semiconductor LM85 and compatibles"
726 If you say yes here you get support for National Semiconductor LM85
727 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
728 EMC6D101, EMC6D102, and EMC6D103.
730 This driver can also be built as a module. If so, the module
734 tristate "National Semiconductor LM87 and compatibles"
738 If you say yes here you get support for National Semiconductor LM87
739 and Analog Devices ADM1024 sensor chips.
741 This driver can also be built as a module. If so, the module
745 tristate "National Semiconductor LM90 and compatibles"
748 If you say yes here you get support for National Semiconductor LM90,
749 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
750 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
751 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
752 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
755 This driver can also be built as a module. If so, the module
759 tristate "National Semiconductor LM92 and compatibles"
762 If you say yes here you get support for National Semiconductor LM92
763 and Maxim MAX6635 sensor chips.
765 This driver can also be built as a module. If so, the module
769 tristate "National Semiconductor LM93 and compatibles"
773 If you say yes here you get support for National Semiconductor LM93,
774 LM94, and compatible sensor chips.
776 This driver can also be built as a module. If so, the module
779 config SENSORS_LTC2945
780 tristate "Linear Technology LTC2945"
785 If you say yes here you get support for Linear Technology LTC2945
788 This driver can also be built as a module. If so, the module will
791 config SENSORS_LTC4151
792 tristate "Linear Technology LTC4151"
796 If you say yes here you get support for Linear Technology LTC4151
797 High Voltage I2C Current and Voltage Monitor interface.
799 This driver can also be built as a module. If so, the module will
802 config SENSORS_LTC4215
803 tristate "Linear Technology LTC4215"
807 If you say yes here you get support for Linear Technology LTC4215
808 Hot Swap Controller I2C interface.
810 This driver can also be built as a module. If so, the module will
813 config SENSORS_LTC4222
814 tristate "Linear Technology LTC4222"
819 If you say yes here you get support for Linear Technology LTC4222
820 Dual Hot Swap Controller I2C interface.
822 This driver can also be built as a module. If so, the module will
825 config SENSORS_LTC4245
826 tristate "Linear Technology LTC4245"
830 If you say yes here you get support for Linear Technology LTC4245
831 Multiple Supply Hot Swap Controller I2C interface.
833 This driver can also be built as a module. If so, the module will
836 config SENSORS_LTC4260
837 tristate "Linear Technology LTC4260"
842 If you say yes here you get support for Linear Technology LTC4260
843 Positive Voltage Hot Swap Controller I2C interface.
845 This driver can also be built as a module. If so, the module will
848 config SENSORS_LTC4261
849 tristate "Linear Technology LTC4261"
853 If you say yes here you get support for Linear Technology LTC4261
854 Negative Voltage Hot Swap Controller I2C interface.
856 This driver can also be built as a module. If so, the module will
859 config SENSORS_LM95234
860 tristate "National Semiconductor LM95234"
863 If you say yes here you get support for the LM95234 temperature
866 This driver can also be built as a module. If so, the module
867 will be called lm95234.
869 config SENSORS_LM95241
870 tristate "National Semiconductor LM95241 and compatibles"
873 If you say yes here you get support for LM95231 and LM95241 sensor
876 This driver can also be built as a module. If so, the module
877 will be called lm95241.
879 config SENSORS_LM95245
880 tristate "National Semiconductor LM95245 sensor chip"
883 If you say yes here you get support for LM95245 sensor chip.
885 This driver can also be built as a module. If so, the module
886 will be called lm95245.
888 config SENSORS_MAX1111
889 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
890 depends on SPI_MASTER
892 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
895 This driver can also be built as a module. If so, the module
896 will be called max1111.
898 config SENSORS_MAX16065
899 tristate "Maxim MAX16065 System Manager and compatibles"
902 If you say yes here you get support for hardware monitoring
903 capabilities of the following Maxim System Manager chips.
911 This driver can also be built as a module. If so, the module
912 will be called max16065.
914 config SENSORS_MAX1619
915 tristate "Maxim MAX1619 sensor chip"
918 If you say yes here you get support for MAX1619 sensor chip.
920 This driver can also be built as a module. If so, the module
921 will be called max1619.
923 config SENSORS_MAX1668
924 tristate "Maxim MAX1668 and compatibles"
927 If you say yes here you get support for MAX1668, MAX1989 and
930 This driver can also be built as a module. If so, the module
931 will be called max1668.
933 config SENSORS_MAX197
934 tristate "Maxim MAX197 and compatibles"
936 Support for the Maxim MAX197 A/D converter.
937 Support will include, but not be limited to, MAX197, and MAX199.
939 This driver can also be built as a module. If so, the module
940 will be called max197.
942 config SENSORS_MAX6639
943 tristate "Maxim MAX6639 sensor chip"
946 If you say yes here you get support for the MAX6639
949 This driver can also be built as a module. If so, the module
950 will be called max6639.
952 config SENSORS_MAX6642
953 tristate "Maxim MAX6642 sensor chip"
956 If you say yes here you get support for MAX6642 sensor chip.
957 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
958 with Overtemperature Alarm from Maxim.
960 This driver can also be built as a module. If so, the module
961 will be called max6642.
963 config SENSORS_MAX6650
964 tristate "Maxim MAX6650 sensor chip"
967 If you say yes here you get support for the MAX6650 / MAX6651
970 This driver can also be built as a module. If so, the module
971 will be called max6650.
973 config SENSORS_MAX6697
974 tristate "Maxim MAX6697 and compatibles"
977 If you say yes here you get support for MAX6581, MAX6602, MAX6622,
978 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
979 temperature sensor chips.
981 This driver can also be built as a module. If so, the module
982 will be called max6697.
984 config SENSORS_MCP3021
985 tristate "Microchip MCP3021 and compatibles"
988 If you say yes here you get support for MCP3021 and MCP3221.
989 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
990 with 12-bit resolution.
992 This driver can also be built as a module. If so, the module
993 will be called mcp3021.
995 config SENSORS_NCT6775
996 tristate "Nuvoton NCT6775F and compatibles"
1000 If you say yes here you get support for the hardware monitoring
1001 functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
1002 and compatible Super-I/O chips. This driver replaces the
1003 w83627ehf driver for NCT6775F and NCT6776F.
1005 This driver can also be built as a module. If so, the module
1006 will be called nct6775.
1008 config SENSORS_NTC_THERMISTOR
1009 tristate "NTC thermistor support"
1010 depends on (!OF && !IIO) || (OF && IIO)
1012 This driver supports NTC thermistors sensor reading and its
1013 interpretation. The driver can also monitor the temperature and
1014 send notifications about the temperature.
1016 Currently, this driver supports
1017 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
1019 This driver can also be built as a module. If so, the module
1020 will be called ntc-thermistor.
1022 config SENSORS_PC87360
1023 tristate "National Semiconductor PC87360 family"
1027 If you say yes here you get access to the hardware monitoring
1028 functions of the National Semiconductor PC8736x Super-I/O chips.
1029 The PC87360, PC87363 and PC87364 only have fan monitoring and
1030 control. The PC87365 and PC87366 additionally have voltage and
1031 temperature monitoring.
1033 This driver can also be built as a module. If so, the module
1034 will be called pc87360.
1036 config SENSORS_PC87427
1037 tristate "National Semiconductor PC87427"
1040 If you say yes here you get access to the hardware monitoring
1041 functions of the National Semiconductor PC87427 Super-I/O chip.
1042 The chip has two distinct logical devices, one for fan speed
1043 monitoring and control, and one for voltage and temperature
1044 monitoring. Fan speed monitoring and control are supported, as
1045 well as temperature monitoring. Voltages aren't supported yet.
1047 This driver can also be built as a module. If so, the module
1048 will be called pc87427.
1050 config SENSORS_PCF8591
1051 tristate "Philips PCF8591 ADC/DAC"
1055 If you say yes here you get support for Philips PCF8591 4-channel
1056 ADC, 1-channel DAC chips.
1058 This driver can also be built as a module. If so, the module
1059 will be called pcf8591.
1061 These devices are hard to detect and rarely found on mainstream
1062 hardware. If unsure, say N.
1064 source drivers/hwmon/pmbus/Kconfig
1066 config SENSORS_SHT15
1067 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1070 If you say yes here you get support for the Sensiron SHT10, SHT11,
1071 SHT15, SHT71, SHT75 humidity and temperature sensors.
1073 This driver can also be built as a module. If so, the module
1074 will be called sht15.
1076 config SENSORS_SHT21
1077 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1080 If you say yes here you get support for the Sensiron SHT21, SHT25
1081 humidity and temperature sensors.
1083 This driver can also be built as a module. If so, the module
1084 will be called sht21.
1087 tristate "Samsung built-in ADC"
1090 If you say yes here you get support for the on-board ADCs of
1091 the Samsung S3C24XX, S3C64XX and other series of SoC
1093 This driver can also be built as a module. If so, the module
1094 will be called s3c-hwmon.
1096 config SENSORS_S3C_RAW
1097 bool "Include raw channel attributes in sysfs"
1098 depends on SENSORS_S3C
1100 Say Y here if you want to include raw copies of all the ADC
1103 config SENSORS_SIS5595
1104 tristate "Silicon Integrated Systems Corp. SiS5595"
1107 If you say yes here you get support for the integrated sensors in
1108 SiS5595 South Bridges.
1110 This driver can also be built as a module. If so, the module
1111 will be called sis5595.
1113 config SENSORS_SMM665
1114 tristate "Summit Microelectronics SMM665"
1118 If you say yes here you get support for the hardware monitoring
1119 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1120 Active DC Output Controller / Monitor.
1122 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1123 Support for those chips is untested.
1125 This driver can also be built as a module. If so, the module will
1128 config SENSORS_DME1737
1129 tristate "SMSC DME1737, SCH311x and compatibles"
1130 depends on I2C && !PPC
1133 If you say yes here you get support for the hardware monitoring
1134 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1135 Asus A8000 Super-I/O chips.
1137 This driver can also be built as a module. If so, the module
1138 will be called dme1737.
1140 config SENSORS_EMC1403
1141 tristate "SMSC EMC1403/23 thermal sensor"
1144 If you say yes here you get support for the SMSC EMC1403/23
1145 temperature monitoring chip.
1147 Threshold values can be configured using sysfs.
1148 Data from the different diodes are accessible via sysfs.
1150 config SENSORS_EMC2103
1151 tristate "SMSC EMC2103"
1154 If you say yes here you get support for the temperature
1155 and fan sensors of the SMSC EMC2103 chips.
1157 This driver can also be built as a module. If so, the module
1158 will be called emc2103.
1160 config SENSORS_EMC6W201
1161 tristate "SMSC EMC6W201"
1164 If you say yes here you get support for the SMSC EMC6W201
1165 hardware monitoring chip.
1167 This driver can also be built as a module. If so, the module
1168 will be called emc6w201.
1170 config SENSORS_SMSC47M1
1171 tristate "SMSC LPC47M10x and compatibles"
1174 If you say yes here you get support for the integrated fan
1175 monitoring and control capabilities of the SMSC LPC47B27x,
1176 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1177 LPC47M192, LPC47M292 and LPC47M997 chips.
1179 The temperature and voltage sensor features of the LPC47M15x,
1180 LPC47M192, LPC47M292 and LPC47M997 are supported by another
1181 driver, select also "SMSC LPC47M192 and compatibles" below for
1184 This driver can also be built as a module. If so, the module
1185 will be called smsc47m1.
1187 config SENSORS_SMSC47M192
1188 tristate "SMSC LPC47M192 and compatibles"
1192 If you say yes here you get support for the temperature and
1193 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1194 and LPC47M997 chips.
1196 The fan monitoring and control capabilities of these chips
1197 are supported by another driver, select
1198 "SMSC LPC47M10x and compatibles" above. You need both drivers
1199 if you want fan control and voltage/temperature sensor support.
1201 This driver can also be built as a module. If so, the module
1202 will be called smsc47m192.
1204 config SENSORS_SMSC47B397
1205 tristate "SMSC LPC47B397-NC"
1208 If you say yes here you get support for the SMSC LPC47B397-NC
1211 This driver can also be built as a module. If so, the module
1212 will be called smsc47b397.
1214 config SENSORS_SCH56XX_COMMON
1218 config SENSORS_SCH5627
1219 tristate "SMSC SCH5627"
1220 depends on !PPC && WATCHDOG
1221 select SENSORS_SCH56XX_COMMON
1222 select WATCHDOG_CORE
1224 If you say yes here you get support for the hardware monitoring
1225 features of the SMSC SCH5627 Super-I/O chip including support for
1226 the integrated watchdog.
1228 This driver can also be built as a module. If so, the module
1229 will be called sch5627.
1231 config SENSORS_SCH5636
1232 tristate "SMSC SCH5636"
1233 depends on !PPC && WATCHDOG
1234 select SENSORS_SCH56XX_COMMON
1235 select WATCHDOG_CORE
1237 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1238 hardware monitoring solutions, allowing motherboard manufacturers to
1239 create their own custom hwmon solution based upon the SCH5636.
1241 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1242 hwmon solution. Say yes here if you want support for the Fujitsu
1243 Theseus' hardware monitoring features including support for the
1244 integrated watchdog.
1246 This driver can also be built as a module. If so, the module
1247 will be called sch5636.
1249 config SENSORS_ADS1015
1250 tristate "Texas Instruments ADS1015"
1253 If you say yes here you get support for Texas Instruments
1254 ADS1015/ADS1115 12/16-bit 4-input ADC device.
1256 This driver can also be built as a module. If so, the module
1257 will be called ads1015.
1259 config SENSORS_ADS7828
1260 tristate "Texas Instruments ADS7828 and compatibles"
1263 If you say yes here you get support for Texas Instruments ADS7828 and
1264 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1265 it is 8-bit on ADS7830.
1267 This driver can also be built as a module. If so, the module
1268 will be called ads7828.
1270 config SENSORS_ADS7871
1271 tristate "Texas Instruments ADS7871 A/D converter"
1274 If you say yes here you get support for TI ADS7871 & ADS7870
1276 This driver can also be built as a module. If so, the module
1277 will be called ads7871.
1279 config SENSORS_AMC6821
1280 tristate "Texas Instruments AMC6821"
1283 If you say yes here you get support for the Texas Instruments
1284 AMC6821 hardware monitoring chips.
1286 This driver can also be build as a module. If so, the module
1287 will be called amc6821.
1289 config SENSORS_INA209
1290 tristate "TI / Burr Brown INA209"
1293 If you say yes here you get support for the TI / Burr Brown INA209
1294 voltage / current / power monitor I2C interface.
1296 This driver can also be built as a module. If so, the module will
1299 config SENSORS_INA2XX
1300 tristate "Texas Instruments INA219 and compatibles"
1303 If you say yes here you get support for INA219, INA220, INA226, and
1304 INA230 power monitor chips.
1306 The INA2xx driver is configured for the default configuration of
1307 the part as described in the datasheet.
1308 Default value for Rshunt is 10 mOhms.
1309 This driver can also be built as a module. If so, the module
1310 will be called ina2xx.
1312 config SENSORS_THMC50
1313 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1316 If you say yes here you get support for Texas Instruments THMC50
1317 sensor chips and clones: the Analog Devices ADM1022.
1319 This driver can also be built as a module. If so, the module
1320 will be called thmc50.
1322 config SENSORS_TMP102
1323 tristate "Texas Instruments TMP102"
1325 depends on THERMAL || !THERMAL_OF
1327 If you say yes here you get support for Texas Instruments TMP102
1330 This driver can also be built as a module. If so, the module
1331 will be called tmp102.
1333 config SENSORS_TMP401
1334 tristate "Texas Instruments TMP401 and compatibles"
1337 If you say yes here you get support for Texas Instruments TMP401,
1338 TMP411, TMP431, and TMP432 temperature sensor chips.
1340 This driver can also be built as a module. If so, the module
1341 will be called tmp401.
1343 config SENSORS_TMP421
1344 tristate "Texas Instruments TMP421 and compatible"
1347 If you say yes here you get support for Texas Instruments TMP421,
1348 TMP422 and TMP423 temperature sensor chips.
1350 This driver can also be built as a module. If so, the module
1351 will be called tmp421.
1353 config SENSORS_TWL4030_MADC
1354 tristate "Texas Instruments TWL4030 MADC Hwmon"
1355 depends on TWL4030_MADC
1357 If you say yes here you get hwmon support for triton
1360 This driver can also be built as a module. If so it will be called
1363 config SENSORS_VEXPRESS
1364 tristate "Versatile Express"
1365 depends on VEXPRESS_CONFIG
1367 This driver provides support for hardware sensors available on
1368 the ARM Ltd's Versatile Express platform. It can provide wide
1369 range of information like temperature, power, energy.
1371 config SENSORS_VIA_CPUTEMP
1372 tristate "VIA CPU temperature sensor"
1376 If you say yes here you get support for the temperature
1377 sensor inside your CPU. Supported are all known variants of
1378 the VIA C7 and Nano.
1380 config SENSORS_VIA686A
1384 If you say yes here you get support for the integrated sensors in
1385 Via 686A/B South Bridges.
1387 This driver can also be built as a module. If so, the module
1388 will be called via686a.
1390 config SENSORS_VT1211
1391 tristate "VIA VT1211"
1395 If you say yes here then you get support for hardware monitoring
1396 features of the VIA VT1211 Super-I/O chip.
1398 This driver can also be built as a module. If so, the module
1399 will be called vt1211.
1401 config SENSORS_VT8231
1402 tristate "VIA VT8231"
1406 If you say yes here then you get support for the integrated sensors
1407 in the VIA VT8231 device.
1409 This driver can also be built as a module. If so, the module
1410 will be called vt8231.
1412 config SENSORS_W83781D
1413 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1417 If you say yes here you get support for the Winbond W8378x series
1418 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1421 This driver can also be built as a module. If so, the module
1422 will be called w83781d.
1424 config SENSORS_W83791D
1425 tristate "Winbond W83791D"
1429 If you say yes here you get support for the Winbond W83791D chip.
1431 This driver can also be built as a module. If so, the module
1432 will be called w83791d.
1434 config SENSORS_W83792D
1435 tristate "Winbond W83792D"
1438 If you say yes here you get support for the Winbond W83792D chip.
1440 This driver can also be built as a module. If so, the module
1441 will be called w83792d.
1443 config SENSORS_W83793
1444 tristate "Winbond W83793"
1448 If you say yes here you get support for the Winbond W83793
1449 hardware monitoring chip, including support for the integrated
1452 This driver can also be built as a module. If so, the module
1453 will be called w83793.
1455 config SENSORS_W83795
1456 tristate "Winbond/Nuvoton W83795G/ADG"
1459 If you say yes here you get support for the Winbond W83795G and
1460 W83795ADG hardware monitoring chip, including manual fan speed
1463 This driver can also be built as a module. If so, the module
1464 will be called w83795.
1466 config SENSORS_W83795_FANCTRL
1467 boolean "Include automatic fan control support (DANGEROUS)"
1468 depends on SENSORS_W83795
1471 If you say yes here, support for automatic fan speed control
1472 will be included in the driver.
1474 This part of the code wasn't carefully reviewed and tested yet,
1475 so enabling this option is strongly discouraged on production
1476 servers. Only developers and testers should enable it for the
1479 Please also note that this option will create sysfs attribute
1480 files which may change in the future, so you shouldn't rely
1481 on them being stable.
1483 config SENSORS_W83L785TS
1484 tristate "Winbond W83L785TS-S"
1487 If you say yes here you get support for the Winbond W83L785TS-S
1488 sensor chip, which is used on the Asus A7N8X, among other
1491 This driver can also be built as a module. If so, the module
1492 will be called w83l785ts.
1494 config SENSORS_W83L786NG
1495 tristate "Winbond W83L786NG, W83L786NR"
1498 If you say yes here you get support for the Winbond W83L786NG
1499 and W83L786NR sensor chips.
1501 This driver can also be built as a module. If so, the module
1502 will be called w83l786ng.
1504 config SENSORS_W83627HF
1505 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1509 If you say yes here you get support for the Winbond W836X7 series
1510 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1513 This driver can also be built as a module. If so, the module
1514 will be called w83627hf.
1516 config SENSORS_W83627EHF
1517 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1521 If you say yes here you get support for the hardware
1522 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1524 This driver also supports the W83627EHG, which is the lead-free
1525 version of the W83627EHF, and the W83627DHG, which is a similar
1526 chip suited for specific Intel processors that use PECI such as
1527 the Core 2 Duo. And also the W83627UHG, which is a stripped down
1528 version of the W83627DHG (as far as hardware monitoring goes.)
1530 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1531 (also known as W83667HG-I), and NCT6776F.
1533 This driver can also be built as a module. If so, the module
1534 will be called w83627ehf.
1536 config SENSORS_WM831X
1537 tristate "WM831x PMICs"
1538 depends on MFD_WM831X
1540 If you say yes here you get support for the hardware
1541 monitoring functionality of the Wolfson Microelectronics
1542 WM831x series of PMICs.
1544 This driver can also be built as a module. If so, the module
1545 will be called wm831x-hwmon.
1547 config SENSORS_WM8350
1548 tristate "Wolfson Microelectronics WM835x"
1549 depends on MFD_WM8350
1551 If you say yes here you get support for the hardware
1552 monitoring features of the WM835x series of PMICs.
1554 This driver can also be built as a module. If so, the module
1555 will be called wm8350-hwmon.
1557 config SENSORS_ULTRA45
1558 tristate "Sun Ultra45 PIC16F747"
1561 This driver provides support for the Ultra45 workstation environmental
1564 config SENSORS_APPLESMC
1565 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1566 depends on INPUT && X86
1569 select INPUT_POLLDEV
1572 This driver provides support for the Apple System Management
1573 Controller, which provides an accelerometer (Apple Sudden Motion
1574 Sensor), light sensors, temperature sensors, keyboard backlight
1575 control and fan control.
1577 Only Intel-based Apple's computers are supported (MacBook Pro,
1580 Data from the different sensors, keyboard backlight control and fan
1581 control are accessible via sysfs.
1583 This driver also provides an absolute input class device, allowing
1584 the laptop to act as a pinball machine-esque joystick.
1586 Say Y here if you have an applicable laptop and want to experience
1587 the awesome power of applesmc.
1589 config SENSORS_MC13783_ADC
1590 tristate "Freescale MC13783/MC13892 ADC"
1591 depends on MFD_MC13XXX
1593 Support for the A/D converter on MC13783 and MC13892 PMIC.
1597 comment "ACPI drivers"
1599 config SENSORS_ACPI_POWER
1600 tristate "ACPI 4.0 power meter"
1602 This driver exposes ACPI 4.0 power meters as hardware monitoring
1603 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
1606 To compile this driver as a module, choose M here:
1607 the module will be called acpi_power_meter.
1609 config SENSORS_ATK0110
1610 tristate "ASUS ATK0110"
1613 If you say yes here you get support for the ACPI hardware
1614 monitoring interface found in many ASUS motherboards. This
1615 driver will provide readings of fans, voltages and temperatures
1616 through the system firmware.
1618 This driver can also be built as a module. If so, the module
1619 will be called asus_atk0110.