drivers/hwmon/pmbus/ltc2978.c

   1 /*
   2  * Hardware monitoring driver for LTC2978 and compatible chips.
   3  *
   4  * Copyright (c) 2011 Ericsson AB.
   5  * Copyright (c) 2013, 2014, 2015 Guenter Roeck
   6  * Copyright (c) 2015 Linear Technology
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16  * GNU General Public License for more details.
  17  */
  18
  19 #include <linux/delay.h>
  20 #include <linux/jiffies.h>
  21 #include <linux/kernel.h>
  22 #include <linux/module.h>
  23 #include <linux/init.h>
  24 #include <linux/err.h>
  25 #include <linux/slab.h>
  26 #include <linux/i2c.h>
  27 #include <linux/regulator/driver.h>
  28 #include "pmbus.h"
  29
  30 enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
  31         ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
  32
  33 /* Common for all chips */
  34 #define LTC2978_MFR_VOUT_PEAK           0xdd
  35 #define LTC2978_MFR_VIN_PEAK            0xde
  36 #define LTC2978_MFR_TEMPERATURE_PEAK    0xdf
  37 #define LTC2978_MFR_SPECIAL_ID          0xe7    /* Undocumented on LTC3882 */
  38 #define LTC2978_MFR_COMMON              0xef
  39
  40 /* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */
  41 #define LTC2978_MFR_VOUT_MIN            0xfb
  42 #define LTC2978_MFR_VIN_MIN             0xfc
  43 #define LTC2978_MFR_TEMPERATURE_MIN     0xfd
  44
  45 /* LTC2974, LTC2975 */
  46 #define LTC2974_MFR_IOUT_PEAK           0xd7
  47 #define LTC2974_MFR_IOUT_MIN            0xd8
  48
  49 /* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
  50 #define LTC3880_MFR_IOUT_PEAK           0xd7
  51 #define LTC3880_MFR_CLEAR_PEAKS         0xe3
  52 #define LTC3880_MFR_TEMPERATURE2_PEAK   0xf4
  53
  54 /* LTC3883 and LTC3886 only */
  55 #define LTC3883_MFR_IIN_PEAK            0xe1
  56
  57 /* LTC2975 only */
  58 #define LTC2975_MFR_IIN_PEAK            0xc4
  59 #define LTC2975_MFR_IIN_MIN             0xc5
  60 #define LTC2975_MFR_PIN_PEAK            0xc6
  61 #define LTC2975_MFR_PIN_MIN             0xc7
  62
  63 #define LTC2978_ID_MASK                 0xfff0
  64
  65 #define LTC2974_ID                      0x0210
  66 #define LTC2975_ID                      0x0220
  67 #define LTC2977_ID                      0x0130
  68 #define LTC2978_ID_REV1                 0x0110  /* Early revision */
  69 #define LTC2978_ID_REV2                 0x0120
  70 #define LTC2980_ID_A                    0x8030  /* A/B for two die IDs */
  71 #define LTC2980_ID_B                    0x8040
  72 #define LTC3880_ID                      0x4020
  73 #define LTC3882_ID                      0x4200
  74 #define LTC3882_ID_D1                   0x4240  /* Dash 1 */
  75 #define LTC3883_ID                      0x4300
  76 #define LTC3886_ID                      0x4600
  77 #define LTC3887_ID                      0x4700
  78 #define LTM2987_ID_A                    0x8010  /* A/B for two die IDs */
  79 #define LTM2987_ID_B                    0x8020
  80 #define LTM4675_ID                      0x47a0
  81 #define LTM4676_ID_REV1                 0x4400
  82 #define LTM4676_ID_REV2                 0x4480
  83 #define LTM4676A_ID                     0x47e0
  84
  85 #define LTC2974_NUM_PAGES               4
  86 #define LTC2978_NUM_PAGES               8
  87 #define LTC3880_NUM_PAGES               2
  88 #define LTC3883_NUM_PAGES               1
  89
  90 #define LTC_POLL_TIMEOUT                100     /* in milli-seconds */
  91
  92 #define LTC_NOT_BUSY                    BIT(5)
  93 #define LTC_NOT_PENDING                 BIT(4)
  94
  95 /*
  96  * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
  97  * happens pretty much each time chip data is updated. Raw peak data therefore
  98  * does not provide much value. To be able to provide useful peak data, keep an
  99  * internal cache of measured peak data, which is only cleared if an explicit
 100  * "clear peak" command is executed for the sensor in question.
 101  */
 102
 103 struct ltc2978_data {
 104         enum chips id;
 105         u16 vin_min, vin_max;
 106         u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES];
 107         u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES];
 108         u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES];
 109         u16 iin_min, iin_max;
 110         u16 pin_min, pin_max;
 111         u16 temp2_max;
 112         struct pmbus_driver_info info;
 113         u32 features;
 114 };
 115 #define to_ltc2978_data(x)  container_of(x, struct ltc2978_data, info)
 116
 117 #define FEAT_CLEAR_PEAKS        BIT(0)
 118 #define FEAT_NEEDS_POLLING      BIT(1)
 119
 120 #define has_clear_peaks(d)      ((d)->features & FEAT_CLEAR_PEAKS)
 121 #define needs_polling(d)        ((d)->features & FEAT_NEEDS_POLLING)
 122
 123 static int ltc_wait_ready(struct i2c_client *client)
 124 {
 125         unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT);
 126         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 127         struct ltc2978_data *data = to_ltc2978_data(info);
 128         int status;
 129         u8 mask;
 130
 131         if (!needs_polling(data))
 132                 return 0;
 133
 134         /*
 135          * LTC3883 does not support LTC_NOT_PENDING, even though
 136          * the datasheet claims that it does.
 137          */
 138         mask = LTC_NOT_BUSY;
 139         if (data->id != ltc3883)
 140                 mask |= LTC_NOT_PENDING;
 141
 142         do {
 143                 status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON);
 144                 if (status == -EBADMSG || status == -ENXIO) {
 145                         /* PEC error or NACK: chip may be busy, try again */
 146                         usleep_range(50, 100);
 147                         continue;
 148                 }
 149                 if (status < 0)
 150                         return status;
 151
 152                 if ((status & mask) == mask)
 153                         return 0;
 154
 155                 usleep_range(50, 100);
 156         } while (time_before(jiffies, timeout));
 157
 158         return -ETIMEDOUT;
 159 }
 160
 161 static int ltc_read_word_data(struct i2c_client *client, int page, int reg)
 162 {
 163         int ret;
 164
 165         ret = ltc_wait_ready(client);
 166         if (ret < 0)
 167                 return ret;
 168
 169         return pmbus_read_word_data(client, page, reg);
 170 }
 171
 172 static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
 173 {
 174         int ret;
 175
 176         ret = ltc_wait_ready(client);
 177         if (ret < 0)
 178                 return ret;
 179
 180         return pmbus_read_byte_data(client, page, reg);
 181 }
 182
 183 static int ltc_write_byte(struct i2c_client *client, int page, u8 byte)
 184 {
 185         int ret;
 186
 187         ret = ltc_wait_ready(client);
 188         if (ret < 0)
 189                 return ret;
 190
 191         return pmbus_write_byte(client, page, byte);
 192 }
 193
 194 static inline int lin11_to_val(int data)
 195 {
 196         s16 e = ((s16)data) >> 11;
 197         s32 m = (((s16)(data << 5)) >> 5);
 198
 199         /*
 200          * mantissa is 10 bit + sign, exponent adds up to 15 bit.
 201          * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
 202          */
 203         e += 6;
 204         return (e < 0 ? m >> -e : m << e);
 205 }
 206
 207 static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client,
 208                        int page, int reg, u16 *pmax)
 209 {
 210         int ret;
 211
 212         ret = ltc_read_word_data(client, page, reg);
 213         if (ret >= 0) {
 214                 if (lin11_to_val(ret) > lin11_to_val(*pmax))
 215                         *pmax = ret;
 216                 ret = *pmax;
 217         }
 218         return ret;
 219 }
 220
 221 static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client,
 222                        int page, int reg, u16 *pmin)
 223 {
 224         int ret;
 225
 226         ret = ltc_read_word_data(client, page, reg);
 227         if (ret >= 0) {
 228                 if (lin11_to_val(ret) < lin11_to_val(*pmin))
 229                         *pmin = ret;
 230                 ret = *pmin;
 231         }
 232         return ret;
 233 }
 234
 235 static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 236                                          int reg)
 237 {
 238         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 239         struct ltc2978_data *data = to_ltc2978_data(info);
 240         int ret;
 241
 242         switch (reg) {
 243         case PMBUS_VIRT_READ_VIN_MAX:
 244                 ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK,
 245                                   &data->vin_max);
 246                 break;
 247         case PMBUS_VIRT_READ_VOUT_MAX:
 248                 ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
 249                 if (ret >= 0) {
 250                         /*
 251                          * VOUT is 16 bit unsigned with fixed exponent,
 252                          * so we can compare it directly
 253                          */
 254                         if (ret > data->vout_max[page])
 255                                 data->vout_max[page] = ret;
 256                         ret = data->vout_max[page];
 257                 }
 258                 break;
 259         case PMBUS_VIRT_READ_TEMP_MAX:
 260                 ret = ltc_get_max(data, client, page,
 261                                   LTC2978_MFR_TEMPERATURE_PEAK,
 262                                   &data->temp_max[page]);
 263                 break;
 264         case PMBUS_VIRT_RESET_VOUT_HISTORY:
 265         case PMBUS_VIRT_RESET_VIN_HISTORY:
 266         case PMBUS_VIRT_RESET_TEMP_HISTORY:
 267                 ret = 0;
 268                 break;
 269         default:
 270                 ret = ltc_wait_ready(client);
 271                 if (ret < 0)
 272                         return ret;
 273                 ret = -ENODATA;
 274                 break;
 275         }
 276         return ret;
 277 }
 278
 279 static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
 280 {
 281         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 282         struct ltc2978_data *data = to_ltc2978_data(info);
 283         int ret;
 284
 285         switch (reg) {
 286         case PMBUS_VIRT_READ_VIN_MIN:
 287                 ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN,
 288                                   &data->vin_min);
 289                 break;
 290         case PMBUS_VIRT_READ_VOUT_MIN:
 291                 ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
 292                 if (ret >= 0) {
 293                         /*
 294                          * VOUT_MIN is known to not be supported on some lots
 295                          * of LTC2978 revision 1, and will return the maximum
 296                          * possible voltage if read. If VOUT_MAX is valid and
 297                          * lower than the reading of VOUT_MIN, use it instead.
 298                          */
 299                         if (data->vout_max[page] && ret > data->vout_max[page])
 300                                 ret = data->vout_max[page];
 301                         if (ret < data->vout_min[page])
 302                                 data->vout_min[page] = ret;
 303                         ret = data->vout_min[page];
 304                 }
 305                 break;
 306         case PMBUS_VIRT_READ_TEMP_MIN:
 307                 ret = ltc_get_min(data, client, page,
 308                                   LTC2978_MFR_TEMPERATURE_MIN,
 309                                   &data->temp_min[page]);
 310                 break;
 311         case PMBUS_VIRT_READ_IOUT_MAX:
 312         case PMBUS_VIRT_RESET_IOUT_HISTORY:
 313         case PMBUS_VIRT_READ_TEMP2_MAX:
 314         case PMBUS_VIRT_RESET_TEMP2_HISTORY:
 315                 ret = -ENXIO;
 316                 break;
 317         default:
 318                 ret = ltc2978_read_word_data_common(client, page, reg);
 319                 break;
 320         }
 321         return ret;
 322 }
 323
 324 static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
 325 {
 326         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 327         struct ltc2978_data *data = to_ltc2978_data(info);
 328         int ret;
 329
 330         switch (reg) {
 331         case PMBUS_VIRT_READ_IOUT_MAX:
 332                 ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK,
 333                                   &data->iout_max[page]);
 334                 break;
 335         case PMBUS_VIRT_READ_IOUT_MIN:
 336                 ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN,
 337                                   &data->iout_min[page]);
 338                 break;
 339         case PMBUS_VIRT_RESET_IOUT_HISTORY:
 340                 ret = 0;
 341                 break;
 342         default:
 343                 ret = ltc2978_read_word_data(client, page, reg);
 344                 break;
 345         }
 346         return ret;
 347 }
 348
 349 static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg)
 350 {
 351         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 352         struct ltc2978_data *data = to_ltc2978_data(info);
 353         int ret;
 354
 355         switch (reg) {
 356         case PMBUS_VIRT_READ_IIN_MAX:
 357                 ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK,
 358                                   &data->iin_max);
 359                 break;
 360         case PMBUS_VIRT_READ_IIN_MIN:
 361                 ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN,
 362                                   &data->iin_min);
 363                 break;
 364         case PMBUS_VIRT_READ_PIN_MAX:
 365                 ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK,
 366                                   &data->pin_max);
 367                 break;
 368         case PMBUS_VIRT_READ_PIN_MIN:
 369                 ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN,
 370                                   &data->pin_min);
 371                 break;
 372         case PMBUS_VIRT_RESET_IIN_HISTORY:
 373         case PMBUS_VIRT_RESET_PIN_HISTORY:
 374                 ret = 0;
 375                 break;
 376         default:
 377                 ret = ltc2978_read_word_data(client, page, reg);
 378                 break;
 379         }
 380         return ret;
 381 }
 382
 383 static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
 384 {
 385         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 386         struct ltc2978_data *data = to_ltc2978_data(info);
 387         int ret;
 388
 389         switch (reg) {
 390         case PMBUS_VIRT_READ_IOUT_MAX:
 391                 ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK,
 392                                   &data->iout_max[page]);
 393                 break;
 394         case PMBUS_VIRT_READ_TEMP2_MAX:
 395                 ret = ltc_get_max(data, client, page,
 396                                   LTC3880_MFR_TEMPERATURE2_PEAK,
 397                                   &data->temp2_max);
 398                 break;
 399         case PMBUS_VIRT_READ_VIN_MIN:
 400         case PMBUS_VIRT_READ_VOUT_MIN:
 401         case PMBUS_VIRT_READ_TEMP_MIN:
 402                 ret = -ENXIO;
 403                 break;
 404         case PMBUS_VIRT_RESET_IOUT_HISTORY:
 405         case PMBUS_VIRT_RESET_TEMP2_HISTORY:
 406                 ret = 0;
 407                 break;
 408         default:
 409                 ret = ltc2978_read_word_data_common(client, page, reg);
 410                 break;
 411         }
 412         return ret;
 413 }
 414
 415 static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
 416 {
 417         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 418         struct ltc2978_data *data = to_ltc2978_data(info);
 419         int ret;
 420
 421         switch (reg) {
 422         case PMBUS_VIRT_READ_IIN_MAX:
 423                 ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK,
 424                                   &data->iin_max);
 425                 break;
 426         case PMBUS_VIRT_RESET_IIN_HISTORY:
 427                 ret = 0;
 428                 break;
 429         default:
 430                 ret = ltc3880_read_word_data(client, page, reg);
 431                 break;
 432         }
 433         return ret;
 434 }
 435
 436 static int ltc2978_clear_peaks(struct ltc2978_data *data,
 437                                struct i2c_client *client, int page)
 438 {
 439         int ret;
 440
 441         if (has_clear_peaks(data))
 442                 ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
 443         else
 444                 ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS);
 445
 446         return ret;
 447 }
 448
 449 static int ltc2978_write_word_data(struct i2c_client *client, int page,
 450                                     int reg, u16 word)
 451 {
 452         const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 453         struct ltc2978_data *data = to_ltc2978_data(info);
 454         int ret;
 455
 456         switch (reg) {
 457         case PMBUS_VIRT_RESET_IIN_HISTORY:
 458                 data->iin_max = 0x7c00;
 459                 data->iin_min = 0x7bff;
 460                 ret = ltc2978_clear_peaks(data, client, 0);
 461                 break;
 462         case PMBUS_VIRT_RESET_PIN_HISTORY:
 463                 data->pin_max = 0x7c00;
 464                 data->pin_min = 0x7bff;
 465                 ret = ltc2978_clear_peaks(data, client, 0);
 466                 break;
 467         case PMBUS_VIRT_RESET_IOUT_HISTORY:
 468                 data->iout_max[page] = 0x7c00;
 469                 data->iout_min[page] = 0xfbff;
 470                 ret = ltc2978_clear_peaks(data, client, page);
 471                 break;
 472         case PMBUS_VIRT_RESET_TEMP2_HISTORY:
 473                 data->temp2_max = 0x7c00;
 474                 ret = ltc2978_clear_peaks(data, client, page);
 475                 break;
 476         case PMBUS_VIRT_RESET_VOUT_HISTORY:
 477                 data->vout_min[page] = 0xffff;
 478                 data->vout_max[page] = 0;
 479                 ret = ltc2978_clear_peaks(data, client, page);
 480                 break;
 481         case PMBUS_VIRT_RESET_VIN_HISTORY:
 482                 data->vin_min = 0x7bff;
 483                 data->vin_max = 0x7c00;
 484                 ret = ltc2978_clear_peaks(data, client, page);
 485                 break;
 486         case PMBUS_VIRT_RESET_TEMP_HISTORY:
 487                 data->temp_min[page] = 0x7bff;
 488                 data->temp_max[page] = 0x7c00;
 489                 ret = ltc2978_clear_peaks(data, client, page);
 490                 break;
 491         default:
 492                 ret = ltc_wait_ready(client);
 493                 if (ret < 0)
 494                         return ret;
 495                 ret = -ENODATA;
 496                 break;
 497         }
 498         return ret;
 499 }
 500
 501 static const struct i2c_device_id ltc2978_id[] = {
 502         {"ltc2974", ltc2974},
 503         {"ltc2975", ltc2975},
 504         {"ltc2977", ltc2977},
 505         {"ltc2978", ltc2978},
 506         {"ltc2980", ltc2980},
 507         {"ltc3880", ltc3880},
 508         {"ltc3882", ltc3882},
 509         {"ltc3883", ltc3883},
 510         {"ltc3886", ltc3886},
 511         {"ltc3887", ltc3887},
 512         {"ltm2987", ltm2987},
 513         {"ltm4675", ltm4675},
 514         {"ltm4676", ltm4676},
 515         {}
 516 };
 517 MODULE_DEVICE_TABLE(i2c, ltc2978_id);
 518
 519 #if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
 520 static const struct regulator_desc ltc2978_reg_desc[] = {
 521         PMBUS_REGULATOR("vout", 0),
 522         PMBUS_REGULATOR("vout", 1),
 523         PMBUS_REGULATOR("vout", 2),
 524         PMBUS_REGULATOR("vout", 3),
 525         PMBUS_REGULATOR("vout", 4),
 526         PMBUS_REGULATOR("vout", 5),
 527         PMBUS_REGULATOR("vout", 6),
 528         PMBUS_REGULATOR("vout", 7),
 529 };
 530 #endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
 531
 532 static int ltc2978_get_id(struct i2c_client *client)
 533 {
 534         int chip_id;
 535
 536         chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
 537         if (chip_id < 0) {
 538                 const struct i2c_device_id *id;
 539                 u8 buf[I2C_SMBUS_BLOCK_MAX];
 540                 int ret;
 541
 542                 if (!i2c_check_functionality(client->adapter,
 543                                              I2C_FUNC_SMBUS_READ_BLOCK_DATA))
 544                         return -ENODEV;
 545
 546                 ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
 547                 if (ret < 0)
 548                         return ret;
 549                 if (ret < 3 || strncmp(buf, "LTC", 3))
 550                         return -ENODEV;
 551
 552                 ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
 553                 if (ret < 0)
 554                         return ret;
 555                 for (id = &ltc2978_id[0]; strlen(id->name); id++) {
 556                         if (!strncasecmp(id->name, buf, strlen(id->name)))
 557                                 return (int)id->driver_data;
 558                 }
 559                 return -ENODEV;
 560         }
 561
 562         chip_id &= LTC2978_ID_MASK;
 563
 564         if (chip_id == LTC2974_ID)
 565                 return ltc2974;
 566         else if (chip_id == LTC2975_ID)
 567                 return ltc2975;
 568         else if (chip_id == LTC2977_ID)
 569                 return ltc2977;
 570         else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2)
 571                 return ltc2978;
 572         else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B)
 573                 return ltc2980;
 574         else if (chip_id == LTC3880_ID)
 575                 return ltc3880;
 576         else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1)
 577                 return ltc3882;
 578         else if (chip_id == LTC3883_ID)
 579                 return ltc3883;
 580         else if (chip_id == LTC3886_ID)
 581                 return ltc3886;
 582         else if (chip_id == LTC3887_ID)
 583                 return ltc3887;
 584         else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
 585                 return ltm2987;
 586         else if (chip_id == LTM4675_ID)
 587                 return ltm4675;
 588         else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
 589                  chip_id == LTM4676A_ID)
 590                 return ltm4676;
 591
 592         dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
 593         return -ENODEV;
 594 }
 595
 596 static int ltc2978_probe(struct i2c_client *client,
 597                          const struct i2c_device_id *id)
 598 {
 599         int i, chip_id;
 600         struct ltc2978_data *data;
 601         struct pmbus_driver_info *info;
 602
 603         if (!i2c_check_functionality(client->adapter,
 604                                      I2C_FUNC_SMBUS_READ_WORD_DATA))
 605                 return -ENODEV;
 606
 607         data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data),
 608                             GFP_KERNEL);
 609         if (!data)
 610                 return -ENOMEM;
 611
 612         chip_id = ltc2978_get_id(client);
 613         if (chip_id < 0)
 614                 return chip_id;
 615
 616         data->id = chip_id;
 617         if (data->id != id->driver_data)
 618                 dev_warn(&client->dev,
 619                          "Device mismatch: Configured %s, detected %s\n",
 620                          id->name,
 621                          ltc2978_id[data->id].name);
 622
 623         info = &data->info;
 624         info->write_word_data = ltc2978_write_word_data;
 625         info->write_byte = ltc_write_byte;
 626         info->read_word_data = ltc_read_word_data;
 627         info->read_byte_data = ltc_read_byte_data;
 628
 629         data->vin_min = 0x7bff;
 630         data->vin_max = 0x7c00;
 631         for (i = 0; i < ARRAY_SIZE(data->vout_min); i++)
 632                 data->vout_min[i] = 0xffff;
 633         for (i = 0; i < ARRAY_SIZE(data->iout_min); i++)
 634                 data->iout_min[i] = 0xfbff;
 635         for (i = 0; i < ARRAY_SIZE(data->iout_max); i++)
 636                 data->iout_max[i] = 0x7c00;
 637         for (i = 0; i < ARRAY_SIZE(data->temp_min); i++)
 638                 data->temp_min[i] = 0x7bff;
 639         for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
 640                 data->temp_max[i] = 0x7c00;
 641         data->temp2_max = 0x7c00;
 642
 643         switch (data->id) {
 644         case ltc2974:
 645                 info->read_word_data = ltc2974_read_word_data;
 646                 info->pages = LTC2974_NUM_PAGES;
 647                 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
 648                   | PMBUS_HAVE_TEMP2;
 649                 for (i = 0; i < info->pages; i++) {
 650                         info->func[i] |= PMBUS_HAVE_VOUT
 651                           | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
 652                           | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
 653                           | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 654                 }
 655                 break;
 656         case ltc2975:
 657                 info->read_word_data = ltc2975_read_word_data;
 658                 info->pages = LTC2974_NUM_PAGES;
 659                 info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
 660                   | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
 661                   | PMBUS_HAVE_TEMP2;
 662                 for (i = 0; i < info->pages; i++) {
 663                         info->func[i] |= PMBUS_HAVE_VOUT
 664                           | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
 665                           | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
 666                           | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 667                 }
 668                 break;
 669         case ltc2977:
 670         case ltc2978:
 671         case ltc2980:
 672         case ltm2987:
 673                 info->read_word_data = ltc2978_read_word_data;
 674                 info->pages = LTC2978_NUM_PAGES;
 675                 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
 676                   | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 677                   | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 678                 for (i = 1; i < LTC2978_NUM_PAGES; i++) {
 679                         info->func[i] = PMBUS_HAVE_VOUT
 680                           | PMBUS_HAVE_STATUS_VOUT;
 681                 }
 682                 break;
 683         case ltc3880:
 684         case ltc3887:
 685         case ltm4675:
 686         case ltm4676:
 687                 data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 688                 info->read_word_data = ltc3880_read_word_data;
 689                 info->pages = LTC3880_NUM_PAGES;
 690                 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
 691                   | PMBUS_HAVE_STATUS_INPUT
 692                   | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 693                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 694                   | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
 695                   | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
 696                 info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 697                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 698                   | PMBUS_HAVE_POUT
 699                   | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 700                 break;
 701         case ltc3882:
 702                 data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 703                 info->read_word_data = ltc3880_read_word_data;
 704                 info->pages = LTC3880_NUM_PAGES;
 705                 info->func[0] = PMBUS_HAVE_VIN
 706                   | PMBUS_HAVE_STATUS_INPUT
 707                   | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 708                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 709                   | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
 710                   | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
 711                 info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 712                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 713                   | PMBUS_HAVE_POUT
 714                   | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 715                 break;
 716         case ltc3883:
 717                 data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 718                 info->read_word_data = ltc3883_read_word_data;
 719                 info->pages = LTC3883_NUM_PAGES;
 720                 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
 721                   | PMBUS_HAVE_STATUS_INPUT
 722                   | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 723                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 724                   | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
 725                   | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
 726                 break;
 727         case ltc3886:
 728                 data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 729                 info->read_word_data = ltc3883_read_word_data;
 730                 info->pages = LTC3880_NUM_PAGES;
 731                 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
 732                   | PMBUS_HAVE_STATUS_INPUT
 733                   | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 734                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 735                   | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
 736                   | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
 737                 info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 738                   | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 739                   | PMBUS_HAVE_POUT
 740                   | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 741                 break;
 742         default:
 743                 return -ENODEV;
 744         }
 745
 746 #if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
 747         info->num_regulators = info->pages;
 748         info->reg_desc = ltc2978_reg_desc;
 749         if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
 750                 dev_err(&client->dev, "num_regulators too large!");
 751                 info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
 752         }
 753 #endif
 754
 755         return pmbus_do_probe(client, id, info);
 756 }
 757
 758 #ifdef CONFIG_OF
 759 static const struct of_device_id ltc2978_of_match[] = {
 760         { .compatible = "lltc,ltc2974" },
 761         { .compatible = "lltc,ltc2975" },
 762         { .compatible = "lltc,ltc2977" },
 763         { .compatible = "lltc,ltc2978" },
 764         { .compatible = "lltc,ltc2980" },
 765         { .compatible = "lltc,ltc3880" },
 766         { .compatible = "lltc,ltc3882" },
 767         { .compatible = "lltc,ltc3883" },
 768         { .compatible = "lltc,ltc3886" },
 769         { .compatible = "lltc,ltc3887" },
 770         { .compatible = "lltc,ltm2987" },
 771         { .compatible = "lltc,ltm4675" },
 772         { .compatible = "lltc,ltm4676" },
 773         { }
 774 };
 775 MODULE_DEVICE_TABLE(of, ltc2978_of_match);
 776 #endif
 777
 778 static struct i2c_driver ltc2978_driver = {
 779         .driver = {
 780                    .name = "ltc2978",
 781                    .of_match_table = of_match_ptr(ltc2978_of_match),
 782                    },
 783         .probe = ltc2978_probe,
 784         .remove = pmbus_do_remove,
 785         .id_table = ltc2978_id,
 786 };
 787
 788 module_i2c_driver(ltc2978_driver);
 789
 790 MODULE_AUTHOR("Guenter Roeck");
 791 MODULE_DESCRIPTION("PMBus driver for LTC2978 and comppatible chips");
 792 MODULE_LICENSE("GPL");