drivers/i2c/busses: don't check resource with devm_ioremap_resource
[deliverable/linux.git] / drivers / i2c / busses / i2c-designware-platdrv.c
1 /*
2 * Synopsys DesignWare I2C adapter driver (master only).
3 *
4 * Based on the TI DAVINCI I2C adapter driver.
5 *
6 * Copyright (C) 2006 Texas Instruments.
7 * Copyright (C) 2007 MontaVista Software Inc.
8 * Copyright (C) 2009 Provigent Ltd.
9 *
10 * ----------------------------------------------------------------------------
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 * ----------------------------------------------------------------------------
26 *
27 */
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/delay.h>
31 #include <linux/i2c.h>
32 #include <linux/clk.h>
33 #include <linux/errno.h>
34 #include <linux/sched.h>
35 #include <linux/err.h>
36 #include <linux/interrupt.h>
37 #include <linux/of_i2c.h>
38 #include <linux/platform_device.h>
39 #include <linux/pm.h>
40 #include <linux/pm_runtime.h>
41 #include <linux/io.h>
42 #include <linux/slab.h>
43 #include <linux/acpi.h>
44 #include "i2c-designware-core.h"
45
46 static struct i2c_algorithm i2c_dw_algo = {
47 .master_xfer = i2c_dw_xfer,
48 .functionality = i2c_dw_func,
49 };
50 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
51 {
52 return clk_get_rate(dev->clk)/1000;
53 }
54
55 #ifdef CONFIG_ACPI
56 static int dw_i2c_acpi_configure(struct platform_device *pdev)
57 {
58 struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
59
60 if (!ACPI_HANDLE(&pdev->dev))
61 return -ENODEV;
62
63 dev->adapter.nr = -1;
64 dev->tx_fifo_depth = 32;
65 dev->rx_fifo_depth = 32;
66 return 0;
67 }
68
69 static const struct acpi_device_id dw_i2c_acpi_match[] = {
70 { "INT33C2", 0 },
71 { "INT33C3", 0 },
72 { "80860F41", 0 },
73 { }
74 };
75 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
76 #else
77 static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
78 {
79 return -ENODEV;
80 }
81 #endif
82
83 static int dw_i2c_probe(struct platform_device *pdev)
84 {
85 struct dw_i2c_dev *dev;
86 struct i2c_adapter *adap;
87 struct resource *mem;
88 int irq, r;
89
90 irq = platform_get_irq(pdev, 0);
91 if (irq < 0) {
92 dev_err(&pdev->dev, "no irq resource?\n");
93 return irq; /* -ENXIO */
94 }
95
96 dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
97 if (!dev)
98 return -ENOMEM;
99
100 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
101 dev->base = devm_ioremap_resource(&pdev->dev, mem);
102 if (IS_ERR(dev->base))
103 return PTR_ERR(dev->base);
104
105 init_completion(&dev->cmd_complete);
106 mutex_init(&dev->lock);
107 dev->dev = &pdev->dev;
108 dev->irq = irq;
109 platform_set_drvdata(pdev, dev);
110
111 dev->clk = devm_clk_get(&pdev->dev, NULL);
112 dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
113
114 if (IS_ERR(dev->clk))
115 return PTR_ERR(dev->clk);
116 clk_prepare_enable(dev->clk);
117
118 dev->functionality =
119 I2C_FUNC_I2C |
120 I2C_FUNC_10BIT_ADDR |
121 I2C_FUNC_SMBUS_BYTE |
122 I2C_FUNC_SMBUS_BYTE_DATA |
123 I2C_FUNC_SMBUS_WORD_DATA |
124 I2C_FUNC_SMBUS_I2C_BLOCK;
125 dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
126 DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
127
128 /* Try first if we can configure the device from ACPI */
129 r = dw_i2c_acpi_configure(pdev);
130 if (r) {
131 u32 param1 = i2c_dw_read_comp_param(dev);
132
133 dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
134 dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
135 dev->adapter.nr = pdev->id;
136 }
137 r = i2c_dw_init(dev);
138 if (r)
139 return r;
140
141 i2c_dw_disable_int(dev);
142 r = devm_request_irq(&pdev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED,
143 pdev->name, dev);
144 if (r) {
145 dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
146 return r;
147 }
148
149 adap = &dev->adapter;
150 i2c_set_adapdata(adap, dev);
151 adap->owner = THIS_MODULE;
152 adap->class = I2C_CLASS_HWMON;
153 strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
154 sizeof(adap->name));
155 adap->algo = &i2c_dw_algo;
156 adap->dev.parent = &pdev->dev;
157 adap->dev.of_node = pdev->dev.of_node;
158
159 r = i2c_add_numbered_adapter(adap);
160 if (r) {
161 dev_err(&pdev->dev, "failure adding adapter\n");
162 return r;
163 }
164 of_i2c_register_devices(adap);
165 acpi_i2c_register_devices(adap);
166
167 pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
168 pm_runtime_use_autosuspend(&pdev->dev);
169 pm_runtime_set_active(&pdev->dev);
170 pm_runtime_enable(&pdev->dev);
171
172 return 0;
173 }
174
175 static int dw_i2c_remove(struct platform_device *pdev)
176 {
177 struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
178
179 pm_runtime_get_sync(&pdev->dev);
180
181 i2c_del_adapter(&dev->adapter);
182
183 i2c_dw_disable(dev);
184
185 pm_runtime_put(&pdev->dev);
186 pm_runtime_disable(&pdev->dev);
187
188 return 0;
189 }
190
191 #ifdef CONFIG_OF
192 static const struct of_device_id dw_i2c_of_match[] = {
193 { .compatible = "snps,designware-i2c", },
194 {},
195 };
196 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
197 #endif
198
199 #ifdef CONFIG_PM
200 static int dw_i2c_suspend(struct device *dev)
201 {
202 struct platform_device *pdev = to_platform_device(dev);
203 struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
204
205 clk_disable_unprepare(i_dev->clk);
206
207 return 0;
208 }
209
210 static int dw_i2c_resume(struct device *dev)
211 {
212 struct platform_device *pdev = to_platform_device(dev);
213 struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
214
215 clk_prepare_enable(i_dev->clk);
216 i2c_dw_init(i_dev);
217
218 return 0;
219 }
220 #endif
221
222 static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
223
224 /* work with hotplug and coldplug */
225 MODULE_ALIAS("platform:i2c_designware");
226
227 static struct platform_driver dw_i2c_driver = {
228 .remove = dw_i2c_remove,
229 .driver = {
230 .name = "i2c_designware",
231 .owner = THIS_MODULE,
232 .of_match_table = of_match_ptr(dw_i2c_of_match),
233 .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
234 .pm = &dw_i2c_dev_pm_ops,
235 },
236 };
237
238 static int __init dw_i2c_init_driver(void)
239 {
240 return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
241 }
242 subsys_initcall(dw_i2c_init_driver);
243
244 static void __exit dw_i2c_exit_driver(void)
245 {
246 platform_driver_unregister(&dw_i2c_driver);
247 }
248 module_exit(dw_i2c_exit_driver);
249
250 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
251 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
252 MODULE_LICENSE("GPL");
This page took 0.036896 seconds and 5 git commands to generate.