drivers/i2c/chips/Kconfig

   1 #
   2 # I2C Sensor device configuration
   3 #
   4
   5 menu "Hardware Sensors Chip support"
   6         depends on I2C
   7
   8 config I2C_SENSOR
   9         tristate
  10         default n
  11
  12 config SENSORS_ADM1021
  13         tristate "Analog Devices ADM1021 and compatibles"
  14         depends on I2C && EXPERIMENTAL
  15         select I2C_SENSOR
  16         help
  17           If you say yes here you get support for Analog Devices ADM1021
  18           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  19           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  20           and the XEON processor built-in sensor.
  21
  22           This driver can also be built as a module.  If so, the module
  23           will be called adm1021.
  24
  25 config SENSORS_ADM1025
  26         tristate "Analog Devices ADM1025 and compatibles"
  27         depends on I2C && EXPERIMENTAL
  28         select I2C_SENSOR
  29         help
  30           If you say yes here you get support for Analog Devices ADM1025
  31           and Philips NE1619 sensor chips.
  32           This driver can also be built as a module.  If so, the module
  33           will be called adm1025.
  34
  35 config SENSORS_ADM1026
  36         tristate "Analog Devices ADM1026 and compatibles"
  37         depends on I2C && EXPERIMENTAL
  38         select I2C_SENSOR
  39         help
  40           If you say yes here you get support for Analog Devices ADM1026
  41           This driver can also be built as a module.  If so, the module
  42           will be called adm1026.
  43
  44 config SENSORS_ADM1031
  45         tristate "Analog Devices ADM1031 and compatibles"
  46         depends on I2C && EXPERIMENTAL
  47         select I2C_SENSOR
  48         help
  49           If you say yes here you get support for Analog Devices ADM1031
  50           and ADM1030 sensor chips.
  51           This driver can also be built as a module.  If so, the module
  52           will be called adm1031.
  53
  54 config SENSORS_ASB100
  55         tristate "Asus ASB100 Bach"
  56         depends on I2C && EXPERIMENTAL
  57         select I2C_SENSOR
  58         help
  59           If you say yes here you get support for the ASB100 Bach sensor
  60           chip found on some Asus mainboards.
  61
  62           This driver can also be built as a module.  If so, the module
  63           will be called asb100.
  64
  65 config SENSORS_ATXP1
  66         tristate "Attansic ATXP1 VID controller"
  67         depends on I2C && EXPERIMENTAL
  68         help
  69           If you say yes here you get support for the Attansic ATXP1 VID
  70           controller.
  71
  72           If your board have such a chip, you are able to control your CPU
  73           core and other voltages.
  74
  75           This driver can also be built as a module.  If so, the module
  76           will be called atxp1.
  77
  78 config SENSORS_DS1621
  79         tristate "Dallas Semiconductor DS1621 and DS1625"
  80         depends on I2C && EXPERIMENTAL
  81         select I2C_SENSOR
  82         help
  83           If you say yes here you get support for Dallas Semiconductor
  84           DS1621 and DS1625 sensor chips.
  85
  86           This driver can also be built as a module.  If so, the module
  87           will be called ds1621.
  88
  89 config SENSORS_FSCHER
  90         tristate "FSC Hermes"
  91         depends on I2C && EXPERIMENTAL
  92         select I2C_SENSOR
  93         help
  94           If you say yes here you get support for Fujitsu Siemens
  95           Computers Hermes sensor chips.
  96
  97           This driver can also be built as a module.  If so, the module
  98           will be called fscher.
  99
 100 config SENSORS_FSCPOS
 101         tristate "FSC Poseidon"
 102         depends on I2C && EXPERIMENTAL
 103         select I2C_SENSOR
 104         help
 105           If you say yes here you get support for Fujitsu Siemens
 106           Computers Poseidon sensor chips.
 107
 108           This driver can also be built as a module.  If so, the module
 109           will be called fscpos.
 110
 111 config SENSORS_GL518SM
 112         tristate "Genesys Logic GL518SM"
 113         depends on I2C && EXPERIMENTAL
 114         select I2C_SENSOR
 115         help
 116           If you say yes here you get support for Genesys Logic GL518SM
 117           sensor chips.
 118
 119           This driver can also be built as a module.  If so, the module
 120           will be called gl518sm.
 121
 122 config SENSORS_GL520SM
 123         tristate "Genesys Logic GL520SM"
 124         depends on I2C && EXPERIMENTAL
 125         select I2C_SENSOR
 126         help
 127           If you say yes here you get support for Genesys Logic GL520SM
 128           sensor chips.
 129
 130           This driver can also be built as a module.  If so, the module
 131           will be called gl520sm.
 132
 133 config SENSORS_IT87
 134         tristate "ITE IT87xx and compatibles"
 135         depends on I2C && EXPERIMENTAL
 136         select I2C_SENSOR
 137         help
 138           If you say yes here you get support for ITE IT87xx sensor chips
 139           and clones: SiS960.
 140
 141           This driver can also be built as a module.  If so, the module
 142           will be called it87.
 143
 144 config SENSORS_LM63
 145         tristate "National Semiconductor LM63"
 146         depends on I2C && EXPERIMENTAL
 147         select I2C_SENSOR
 148         help
 149           If you say yes here you get support for the National Semiconductor
 150           LM63 remote diode digital temperature sensor with integrated fan
 151           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 152           motherboard, among others.
 153
 154           This driver can also be built as a module.  If so, the module
 155           will be called lm63.
 156
 157 config SENSORS_LM75
 158         tristate "National Semiconductor LM75 and compatibles"
 159         depends on I2C && EXPERIMENTAL
 160         select I2C_SENSOR
 161         help
 162           If you say yes here you get support for National Semiconductor LM75
 163           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 164           9-bit precision mode), and TelCom (now Microchip) TCN75.
 165
 166           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 167           a force module parameter. The driver will not handle the extra
 168           precision anyhow.
 169
 170           This driver can also be built as a module.  If so, the module
 171           will be called lm75.
 172
 173 config SENSORS_LM77
 174         tristate "National Semiconductor LM77"
 175         depends on I2C && EXPERIMENTAL
 176         select I2C_SENSOR
 177         help
 178           If you say yes here you get support for National Semiconductor LM77
 179           sensor chips.
 180
 181           This driver can also be built as a module.  If so, the module
 182           will be called lm77.
 183
 184 config SENSORS_LM78
 185         tristate "National Semiconductor LM78 and compatibles"
 186         depends on I2C && EXPERIMENTAL
 187         select I2C_SENSOR
 188         help
 189           If you say yes here you get support for National Semiconductor LM78,
 190           LM78-J and LM79.  This can also be built as a module which can be
 191           inserted and removed while the kernel is running.
 192
 193           This driver can also be built as a module.  If so, the module
 194           will be called lm78.
 195
 196 config SENSORS_LM80
 197         tristate "National Semiconductor LM80"
 198         depends on I2C && EXPERIMENTAL
 199         select I2C_SENSOR
 200         help
 201           If you say yes here you get support for National Semiconductor
 202           LM80 sensor chips.
 203
 204           This driver can also be built as a module.  If so, the module
 205           will be called lm80.
 206
 207 config SENSORS_LM83
 208         tristate "National Semiconductor LM83"
 209         depends on I2C
 210         select I2C_SENSOR
 211         help
 212           If you say yes here you get support for National Semiconductor
 213           LM83 sensor chips.
 214
 215           This driver can also be built as a module.  If so, the module
 216           will be called lm83.
 217
 218 config SENSORS_LM85
 219         tristate "National Semiconductor LM85 and compatibles"
 220         depends on I2C && EXPERIMENTAL
 221         select I2C_SENSOR
 222         help
 223           If you say yes here you get support for National Semiconductor LM85
 224           sensor chips and clones: ADT7463 and ADM1027.
 225
 226           This driver can also be built as a module.  If so, the module
 227           will be called lm85.
 228
 229 config SENSORS_LM87
 230         tristate "National Semiconductor LM87"
 231         depends on I2C && EXPERIMENTAL
 232         select I2C_SENSOR
 233         help
 234           If you say yes here you get support for National Semiconductor LM87
 235           sensor chips.
 236
 237           This driver can also be built as a module.  If so, the module
 238           will be called lm87.
 239
 240 config SENSORS_LM90
 241         tristate "National Semiconductor LM90 and compatibles"
 242         depends on I2C
 243         select I2C_SENSOR
 244         help
 245           If you say yes here you get support for National Semiconductor LM90,
 246           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
 247           MAX6658 sensor chips.
 248
 249           The Analog Devices ADT7461 sensor chip is also supported, but only
 250           if found in ADM1032 compatibility mode.
 251
 252           This driver can also be built as a module.  If so, the module
 253           will be called lm90.
 254
 255 config SENSORS_LM92
 256         tristate "National Semiconductor LM92 and compatibles"
 257         depends on I2C && EXPERIMENTAL
 258         select I2C_SENSOR
 259         help
 260           If you say yes here you get support for National Semiconductor LM92
 261           and Maxim MAX6635 sensor chips.
 262
 263           This driver can also be built as a module.  If so, the module
 264           will be called lm92.
 265
 266 config SENSORS_MAX1619
 267         tristate "Maxim MAX1619 sensor chip"
 268         depends on I2C && EXPERIMENTAL
 269         select I2C_SENSOR
 270         help
 271           If you say yes here you get support for MAX1619 sensor chip.
 272
 273           This driver can also be built as a module.  If so, the module
 274           will be called max1619.
 275
 276 config SENSORS_PC87360
 277         tristate "National Semiconductor PC87360 family"
 278         depends on I2C && EXPERIMENTAL
 279         select I2C_SENSOR
 280         select I2C_ISA
 281         help
 282           If you say yes here you get access to the hardware monitoring
 283           functions of the National Semiconductor PC8736x Super-I/O chips.
 284           The PC87360, PC87363 and PC87364 only have fan monitoring and
 285           control.  The PC87365 and PC87366 additionally have voltage and
 286           temperature monitoring.
 287
 288           This driver can also be built as a module.  If so, the module
 289           will be called pc87360.
 290
 291 config SENSORS_SMSC47B397
 292         tristate "SMSC LPC47B397-NC"
 293         depends on I2C && EXPERIMENTAL
 294         select I2C_SENSOR
 295         select I2C_ISA
 296         help
 297           If you say yes here you get support for the SMSC LPC47B397-NC
 298           sensor chip.
 299
 300           This driver can also be built as a module.  If so, the module
 301           will be called smsc47b397.
 302
 303 config SENSORS_SIS5595
 304         tristate "Silicon Integrated Systems Corp. SiS5595"
 305         depends on I2C && PCI && EXPERIMENTAL
 306         select I2C_SENSOR
 307         select I2C_ISA
 308         help
 309           If you say yes here you get support for the integrated sensors in
 310           SiS5595 South Bridges.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called sis5595.
 314
 315 config SENSORS_SMSC47M1
 316         tristate "SMSC LPC47M10x and compatibles"
 317         depends on I2C && EXPERIMENTAL
 318         select I2C_SENSOR
 319         select I2C_ISA
 320         help
 321           If you say yes here you get support for the integrated fan
 322           monitoring and control capabilities of the SMSC LPC47B27x,
 323           LPC47M10x, LPC47M13x and LPC47M14x chips.
 324
 325           This driver can also be built as a module.  If so, the module
 326           will be called smsc47m1.
 327
 328 config SENSORS_VIA686A
 329         tristate "VIA686A"
 330         depends on I2C && PCI && EXPERIMENTAL
 331         select I2C_SENSOR
 332         select I2C_ISA
 333         help
 334           If you say yes here you get support for the integrated sensors in
 335           Via 686A/B South Bridges.
 336
 337           This driver can also be built as a module.  If so, the module
 338           will be called via686a.
 339
 340 config SENSORS_W83781D
 341         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 342         depends on I2C && EXPERIMENTAL
 343         select I2C_SENSOR
 344         help
 345           If you say yes here you get support for the Winbond W8378x series
 346           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 347           and the similar Asus AS99127F.
 348
 349           This driver can also be built as a module.  If so, the module
 350           will be called w83781d.
 351
 352 config SENSORS_W83L785TS
 353         tristate "Winbond W83L785TS-S"
 354         depends on I2C && EXPERIMENTAL
 355         select I2C_SENSOR
 356         help
 357           If you say yes here you get support for the Winbond W83L785TS-S
 358           sensor chip, which is used on the Asus A7N8X, among other
 359           motherboards.
 360
 361           This driver can also be built as a module.  If so, the module
 362           will be called w83l785ts.
 363
 364 config SENSORS_W83627HF
 365         tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
 366         depends on I2C && EXPERIMENTAL
 367         select I2C_SENSOR
 368         select I2C_ISA
 369         help
 370           If you say yes here you get support for the Winbond W836X7 series
 371           of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
 372
 373           This driver can also be built as a module.  If so, the module
 374           will be called w83627hf.
 375
 376 endmenu
 377
 378 menu "Other I2C Chip support"
 379         depends on I2C
 380
 381 config SENSORS_DS1337
 382         tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
 383         depends on I2C && EXPERIMENTAL
 384         select I2C_SENSOR
 385         help
 386           If you say yes here you get support for Dallas Semiconductor
 387           DS1337 and DS1339 real-time clock chips.
 388
 389           This driver can also be built as a module.  If so, the module
 390           will be called ds1337.
 391
 392 config SENSORS_EEPROM
 393         tristate "EEPROM reader"
 394         depends on I2C && EXPERIMENTAL
 395         select I2C_SENSOR
 396         help
 397           If you say yes here you get read-only access to the EEPROM data
 398           available on modern memory DIMMs and Sony Vaio laptops.  Such
 399           EEPROMs could theoretically be available on other devices as well.
 400
 401           This driver can also be built as a module.  If so, the module
 402           will be called eeprom.
 403
 404 config SENSORS_PCF8574
 405         tristate "Philips PCF8574 and PCF8574A"
 406         depends on I2C && EXPERIMENTAL
 407         select I2C_SENSOR
 408         help
 409           If you say yes here you get support for Philips PCF8574 and
 410           PCF8574A chips.
 411
 412           This driver can also be built as a module.  If so, the module
 413           will be called pcf8574.
 414
 415 config SENSORS_PCF8591
 416         tristate "Philips PCF8591"
 417         depends on I2C && EXPERIMENTAL
 418         select I2C_SENSOR
 419         help
 420           If you say yes here you get support for Philips PCF8591 chips.
 421
 422           This driver can also be built as a module.  If so, the module
 423           will be called pcf8591.
 424
 425 config SENSORS_RTC8564
 426         tristate "Epson 8564 RTC chip"
 427         depends on I2C && EXPERIMENTAL
 428         select I2C_SENSOR
 429         help
 430           If you say yes here you get support for the Epson 8564 RTC chip.
 431
 432           This driver can also be built as a module.  If so, the module
 433           will be called i2c-rtc8564.
 434
 435 config ISP1301_OMAP
 436         tristate "Philips ISP1301 with OMAP OTG"
 437         depends on I2C && ARCH_OMAP_OTG
 438         help
 439           If you say yes here you get support for the Philips ISP1301
 440           USB-On-The-Go transceiver working with the OMAP OTG controller.
 441           The ISP1301 is used in products including H2 and H3 development
 442           boards for Texas Instruments OMAP processors.
 443
 444           This driver can also be built as a module.  If so, the module
 445           will be called isp1301_omap.
 446
 447 config SENSORS_M41T00
 448         tristate "ST M41T00 RTC chip"
 449         depends on I2C && PPC32
 450         help
 451           If you say yes here you get support for the ST M41T00 RTC chip.
 452
 453           This driver can also be built as a module.  If so, the module
 454           will be called m41t00.
 455
 456 endmenu