2 * IDE ATAPI streaming tape driver.
4 * Copyright (C) 1995-1999 Gadi Oxman <gadio@netvision.net.il>
5 * Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
7 * This driver was constructed as a student project in the software laboratory
8 * of the faculty of electrical engineering in the Technion - Israel's
9 * Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David.
11 * It is hereby placed under the terms of the GNU general public license.
12 * (See linux/COPYING).
14 * For a historical changelog see
15 * Documentation/ide/ChangeLog.ide-tape.1995-2002
18 #define IDETAPE_VERSION "1.19"
20 #include <linux/module.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/kernel.h>
24 #include <linux/delay.h>
25 #include <linux/timer.h>
27 #include <linux/interrupt.h>
28 #include <linux/jiffies.h>
29 #include <linux/major.h>
30 #include <linux/errno.h>
31 #include <linux/genhd.h>
32 #include <linux/slab.h>
33 #include <linux/pci.h>
34 #include <linux/ide.h>
35 #include <linux/smp_lock.h>
36 #include <linux/completion.h>
37 #include <linux/bitops.h>
38 #include <linux/mutex.h>
40 #include <asm/byteorder.h>
42 #include <asm/uaccess.h>
44 #include <asm/unaligned.h>
45 #include <linux/mtio.h>
47 /**************************** Tunable parameters *****************************/
51 * Pipelined mode parameters.
53 * We try to use the minimum number of stages which is enough to
54 * keep the tape constantly streaming. To accomplish that, we implement
55 * a feedback loop around the maximum number of stages:
57 * We start from MIN maximum stages (we will not even use MIN stages
58 * if we don't need them), increment it by RATE*(MAX-MIN)
59 * whenever we sense that the pipeline is empty, until we reach
60 * the optimum value or until we reach MAX.
62 * Setting the following parameter to 0 is illegal: the pipelined mode
63 * cannot be disabled (calculate_speeds() divides by tape->max_stages.)
65 #define IDETAPE_MIN_PIPELINE_STAGES 1
66 #define IDETAPE_MAX_PIPELINE_STAGES 400
67 #define IDETAPE_INCREASE_STAGES_RATE 20
70 * The following are used to debug the driver:
72 * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control.
74 * Setting them to 0 will restore normal operation mode:
76 * 1. Disable logging normal successful operations.
77 * 2. Disable self-sanity checks.
78 * 3. Errors will still be logged, of course.
80 * All the #if DEBUG code will be removed some day, when the driver
81 * is verified to be stable enough. This will make it much more
84 #define IDETAPE_DEBUG_LOG 0
87 * After each failed packet command we issue a request sense command
88 * and retry the packet command IDETAPE_MAX_PC_RETRIES times.
90 * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
92 #define IDETAPE_MAX_PC_RETRIES 3
95 * With each packet command, we allocate a buffer of
96 * IDETAPE_PC_BUFFER_SIZE bytes. This is used for several packet
97 * commands (Not for READ/WRITE commands).
99 #define IDETAPE_PC_BUFFER_SIZE 256
102 * In various places in the driver, we need to allocate storage
103 * for packet commands and requests, which will remain valid while
104 * we leave the driver to wait for an interrupt or a timeout event.
106 #define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
109 * Some drives (for example, Seagate STT3401A Travan) require a very long
110 * timeout, because they don't return an interrupt or clear their busy bit
111 * until after the command completes (even retension commands).
113 #define IDETAPE_WAIT_CMD (900*HZ)
116 * The following parameter is used to select the point in the internal
117 * tape fifo in which we will start to refill the buffer. Decreasing
118 * the following parameter will improve the system's latency and
119 * interactive response, while using a high value might improve system
122 #define IDETAPE_FIFO_THRESHOLD 2
125 * DSC polling parameters.
127 * Polling for DSC (a single bit in the status register) is a very
128 * important function in ide-tape. There are two cases in which we
131 * 1. Before a read/write packet command, to ensure that we
132 * can transfer data from/to the tape's data buffers, without
133 * causing an actual media access. In case the tape is not
134 * ready yet, we take out our request from the device
135 * request queue, so that ide.c will service requests from
136 * the other device on the same interface meanwhile.
138 * 2. After the successful initialization of a "media access
139 * packet command", which is a command which can take a long
140 * time to complete (it can be several seconds or even an hour).
142 * Again, we postpone our request in the middle to free the bus
143 * for the other device. The polling frequency here should be
144 * lower than the read/write frequency since those media access
145 * commands are slow. We start from a "fast" frequency -
146 * IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC
147 * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a
148 * lower frequency - IDETAPE_DSC_MA_SLOW (1 minute).
150 * We also set a timeout for the timer, in case something goes wrong.
151 * The timeout should be longer then the maximum execution time of a
158 #define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */
159 #define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */
160 #define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */
161 #define IDETAPE_DSC_MA_FAST 2*HZ /* 2 seconds */
162 #define IDETAPE_DSC_MA_THRESHOLD 5*60*HZ /* 5 minutes */
163 #define IDETAPE_DSC_MA_SLOW 30*HZ /* 30 seconds */
164 #define IDETAPE_DSC_MA_TIMEOUT 2*60*60*HZ /* 2 hours */
166 /*************************** End of tunable parameters ***********************/
169 * Read/Write error simulation
171 #define SIMULATE_ERRORS 0
174 * For general magnetic tape device compatibility.
177 idetape_direction_none
,
178 idetape_direction_read
,
179 idetape_direction_write
180 } idetape_chrdev_direction_t
;
185 struct idetape_bh
*b_reqnext
;
190 * Our view of a packet command.
192 typedef struct idetape_packet_command_s
{
193 u8 c
[12]; /* Actual packet bytes */
194 int retries
; /* On each retry, we increment retries */
195 int error
; /* Error code */
196 int request_transfer
; /* Bytes to transfer */
197 int actually_transferred
; /* Bytes actually transferred */
198 int buffer_size
; /* Size of our data buffer */
199 struct idetape_bh
*bh
;
202 u8
*buffer
; /* Data buffer */
203 u8
*current_position
; /* Pointer into the above buffer */
204 ide_startstop_t (*callback
) (ide_drive_t
*); /* Called when this packet command is completed */
205 u8 pc_buffer
[IDETAPE_PC_BUFFER_SIZE
]; /* Temporary buffer */
206 unsigned long flags
; /* Status/Action bit flags: long for set_bit */
210 * Packet command flag bits.
212 /* Set when an error is considered normal - We won't retry */
214 /* 1 When polling for DSC on a media access command */
215 #define PC_WAIT_FOR_DSC 1
216 /* 1 when we prefer to use DMA if possible */
217 #define PC_DMA_RECOMMENDED 2
218 /* 1 while DMA in progress */
219 #define PC_DMA_IN_PROGRESS 3
220 /* 1 when encountered problem during DMA */
221 #define PC_DMA_ERROR 4
229 unsigned page_code
:6; /* Page code - Should be 0x30 */
230 unsigned reserved1_6
:1;
232 __u8 page_length
; /* Page Length - Should be 2 */
235 unsigned play32_5
:1;
236 unsigned reserved2_23
:2;
237 unsigned record32
:1;
238 unsigned record32_5
:1;
239 unsigned reserved2_6
:1;
241 } idetape_block_size_page_t
;
246 typedef struct idetape_stage_s
{
247 struct request rq
; /* The corresponding request */
248 struct idetape_bh
*bh
; /* The data buffers */
249 struct idetape_stage_s
*next
; /* Pointer to the next stage */
253 * Most of our global data which we need to save even as we leave the
254 * driver due to an interrupt or a timer event is stored in a variable
255 * of type idetape_tape_t, defined below.
257 typedef struct ide_tape_obj
{
259 ide_driver_t
*driver
;
260 struct gendisk
*disk
;
264 * Since a typical character device operation requires more
265 * than one packet command, we provide here enough memory
266 * for the maximum of interconnected packet commands.
267 * The packet commands are stored in the circular array pc_stack.
268 * pc_stack_index points to the last used entry, and warps around
269 * to the start when we get to the last array entry.
271 * pc points to the current processed packet command.
273 * failed_pc points to the last failed packet command, or contains
274 * NULL if we do not need to retry any packet command. This is
275 * required since an additional packet command is needed before the
276 * retry, to get detailed information on what went wrong.
278 /* Current packet command */
280 /* Last failed packet command */
281 idetape_pc_t
*failed_pc
;
282 /* Packet command stack */
283 idetape_pc_t pc_stack
[IDETAPE_PC_STACK
];
284 /* Next free packet command storage space */
286 struct request rq_stack
[IDETAPE_PC_STACK
];
287 /* We implement a circular array */
291 * DSC polling variables.
293 * While polling for DSC we use postponed_rq to postpone the
294 * current request so that ide.c will be able to service
295 * pending requests on the other device. Note that at most
296 * we will have only one DSC (usually data transfer) request
297 * in the device request queue. Additional requests can be
298 * queued in our internal pipeline, but they will be visible
299 * to ide.c only one at a time.
301 struct request
*postponed_rq
;
302 /* The time in which we started polling for DSC */
303 unsigned long dsc_polling_start
;
304 /* Timer used to poll for dsc */
305 struct timer_list dsc_timer
;
306 /* Read/Write dsc polling frequency */
307 unsigned long best_dsc_rw_frequency
;
308 /* The current polling frequency */
309 unsigned long dsc_polling_frequency
;
310 /* Maximum waiting time */
311 unsigned long dsc_timeout
;
314 * Read position information
318 unsigned int first_frame_position
;
319 unsigned int last_frame_position
;
320 unsigned int blocks_in_buffer
;
323 * Last error information
325 u8 sense_key
, asc
, ascq
;
328 * Character device operation
333 /* Current character device data transfer direction */
334 idetape_chrdev_direction_t chrdev_direction
;
339 /* Usually 512 or 1024 bytes */
340 unsigned short tape_block_size
;
343 /* Copy of the tape's Capabilities and Mechanical Page */
347 * Active data transfer request parameters.
349 * At most, there is only one ide-tape originated data transfer
350 * request in the device request queue. This allows ide.c to
351 * easily service requests from the other device when we
352 * postpone our active request. In the pipelined operation
353 * mode, we use our internal pipeline structure to hold
354 * more data requests.
356 * The data buffer size is chosen based on the tape's
359 /* Pointer to the request which is waiting in the device request queue */
360 struct request
*active_data_request
;
361 /* Data buffer size (chosen based on the tape's recommendation */
363 idetape_stage_t
*merge_stage
;
364 int merge_stage_size
;
365 struct idetape_bh
*bh
;
370 * Pipeline parameters.
372 * To accomplish non-pipelined mode, we simply set the following
373 * variables to zero (or NULL, where appropriate).
375 /* Number of currently used stages */
377 /* Number of pending stages */
378 int nr_pending_stages
;
379 /* We will not allocate more than this number of stages */
380 int max_stages
, min_pipeline
, max_pipeline
;
381 /* The first stage which will be removed from the pipeline */
382 idetape_stage_t
*first_stage
;
383 /* The currently active stage */
384 idetape_stage_t
*active_stage
;
385 /* Will be serviced after the currently active request */
386 idetape_stage_t
*next_stage
;
387 /* New requests will be added to the pipeline here */
388 idetape_stage_t
*last_stage
;
389 /* Optional free stage which we can use */
390 idetape_stage_t
*cache_stage
;
392 /* Wasted space in each stage */
395 /* Status/Action flags: long for set_bit */
397 /* protects the ide-tape queue */
401 * Measures average tape speed
403 unsigned long avg_time
;
409 char firmware_revision
[6];
410 int firmware_revision_num
;
412 /* the door is currently locked */
414 /* the tape hardware is write protected */
416 /* the tape is write protected (hardware or opened as read-only) */
420 * Limit the number of times a request can
421 * be postponed, to avoid an infinite postpone
424 /* request postpone count limit */
428 * Measures number of frames:
430 * 1. written/read to/from the driver pipeline (pipeline_head).
431 * 2. written/read to/from the tape buffers (idetape_bh).
432 * 3. written/read by the tape to/from the media (tape_head).
440 * Speed control at the tape buffers input/output
442 unsigned long insert_time
;
445 int max_insert_speed
;
446 int measure_insert_time
;
449 * Measure tape still time, in milliseconds
451 unsigned long tape_still_time_begin
;
455 * Speed regulation negative feedback loop
458 int pipeline_head_speed
;
459 int controlled_pipeline_head_speed
;
460 int uncontrolled_pipeline_head_speed
;
461 int controlled_last_pipeline_head
;
462 int uncontrolled_last_pipeline_head
;
463 unsigned long uncontrolled_pipeline_head_time
;
464 unsigned long controlled_pipeline_head_time
;
465 int controlled_previous_pipeline_head
;
466 int uncontrolled_previous_pipeline_head
;
467 unsigned long controlled_previous_head_time
;
468 unsigned long uncontrolled_previous_head_time
;
469 int restart_speed_control_req
;
472 * Debug_level determines amount of debugging output;
473 * can be changed using /proc/ide/hdx/settings
474 * 0 : almost no debugging output
475 * 1 : 0+output errors only
476 * 2 : 1+output all sensekey/asc
477 * 3 : 2+follow all chrdev related procedures
478 * 4 : 3+follow all procedures
479 * 5 : 4+include pc_stack rq_stack info
480 * 6 : 5+USE_COUNT updates
485 static DEFINE_MUTEX(idetape_ref_mutex
);
487 static struct class *idetape_sysfs_class
;
489 #define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
491 #define ide_tape_g(disk) \
492 container_of((disk)->private_data, struct ide_tape_obj, driver)
494 static struct ide_tape_obj
*ide_tape_get(struct gendisk
*disk
)
496 struct ide_tape_obj
*tape
= NULL
;
498 mutex_lock(&idetape_ref_mutex
);
499 tape
= ide_tape_g(disk
);
501 kref_get(&tape
->kref
);
502 mutex_unlock(&idetape_ref_mutex
);
506 static void ide_tape_release(struct kref
*);
508 static void ide_tape_put(struct ide_tape_obj
*tape
)
510 mutex_lock(&idetape_ref_mutex
);
511 kref_put(&tape
->kref
, ide_tape_release
);
512 mutex_unlock(&idetape_ref_mutex
);
518 #define DOOR_UNLOCKED 0
519 #define DOOR_LOCKED 1
520 #define DOOR_EXPLICITLY_LOCKED 2
523 * Tape flag bits values.
525 #define IDETAPE_IGNORE_DSC 0
526 #define IDETAPE_ADDRESS_VALID 1 /* 0 When the tape position is unknown */
527 #define IDETAPE_BUSY 2 /* Device already opened */
528 #define IDETAPE_PIPELINE_ERROR 3 /* Error detected in a pipeline stage */
529 #define IDETAPE_DETECT_BS 4 /* Attempt to auto-detect the current user block size */
530 #define IDETAPE_FILEMARK 5 /* Currently on a filemark */
531 #define IDETAPE_DRQ_INTERRUPT 6 /* DRQ interrupt device */
532 #define IDETAPE_READ_ERROR 7
533 #define IDETAPE_PIPELINE_ACTIVE 8 /* pipeline active */
534 /* 0 = no tape is loaded, so we don't rewind after ejecting */
535 #define IDETAPE_MEDIUM_PRESENT 9
538 * Supported ATAPI tape drives packet commands
540 #define IDETAPE_TEST_UNIT_READY_CMD 0x00
541 #define IDETAPE_REWIND_CMD 0x01
542 #define IDETAPE_REQUEST_SENSE_CMD 0x03
543 #define IDETAPE_READ_CMD 0x08
544 #define IDETAPE_WRITE_CMD 0x0a
545 #define IDETAPE_WRITE_FILEMARK_CMD 0x10
546 #define IDETAPE_SPACE_CMD 0x11
547 #define IDETAPE_INQUIRY_CMD 0x12
548 #define IDETAPE_ERASE_CMD 0x19
549 #define IDETAPE_MODE_SENSE_CMD 0x1a
550 #define IDETAPE_MODE_SELECT_CMD 0x15
551 #define IDETAPE_LOAD_UNLOAD_CMD 0x1b
552 #define IDETAPE_PREVENT_CMD 0x1e
553 #define IDETAPE_LOCATE_CMD 0x2b
554 #define IDETAPE_READ_POSITION_CMD 0x34
555 #define IDETAPE_READ_BUFFER_CMD 0x3c
556 #define IDETAPE_SET_SPEED_CMD 0xbb
559 * Some defines for the READ BUFFER command
561 #define IDETAPE_RETRIEVE_FAULTY_BLOCK 6
564 * Some defines for the SPACE command
566 #define IDETAPE_SPACE_OVER_FILEMARK 1
567 #define IDETAPE_SPACE_TO_EOD 3
570 * Some defines for the LOAD UNLOAD command
572 #define IDETAPE_LU_LOAD_MASK 1
573 #define IDETAPE_LU_RETENSION_MASK 2
574 #define IDETAPE_LU_EOT_MASK 4
577 * Special requests for our block device strategy routine.
579 * In order to service a character device command, we add special
580 * requests to the tail of our block device request queue and wait
581 * for their completion.
585 REQ_IDETAPE_PC1
= (1 << 0), /* packet command (first stage) */
586 REQ_IDETAPE_PC2
= (1 << 1), /* packet command (second stage) */
587 REQ_IDETAPE_READ
= (1 << 2),
588 REQ_IDETAPE_WRITE
= (1 << 3),
589 REQ_IDETAPE_READ_BUFFER
= (1 << 4),
593 * Error codes which are returned in rq->errors to the higher part
596 #define IDETAPE_ERROR_GENERAL 101
597 #define IDETAPE_ERROR_FILEMARK 102
598 #define IDETAPE_ERROR_EOD 103
601 * The following is used to format the general configuration word of
602 * the ATAPI IDENTIFY DEVICE command.
604 struct idetape_id_gcw
{
605 unsigned packet_size
:2; /* Packet Size */
606 unsigned reserved234
:3; /* Reserved */
607 unsigned drq_type
:2; /* Command packet DRQ type */
608 unsigned removable
:1; /* Removable media */
609 unsigned device_type
:5; /* Device type */
610 unsigned reserved13
:1; /* Reserved */
611 unsigned protocol
:2; /* Protocol type */
615 * READ POSITION packet command - Data Format (From Table 6-57)
618 unsigned reserved0_10
:2; /* Reserved */
619 unsigned bpu
:1; /* Block Position Unknown */
620 unsigned reserved0_543
:3; /* Reserved */
621 unsigned eop
:1; /* End Of Partition */
622 unsigned bop
:1; /* Beginning Of Partition */
623 u8 partition
; /* Partition Number */
624 u8 reserved2
, reserved3
; /* Reserved */
625 u32 first_block
; /* First Block Location */
626 u32 last_block
; /* Last Block Location (Optional) */
627 u8 reserved12
; /* Reserved */
628 u8 blocks_in_buffer
[3]; /* Blocks In Buffer - (Optional) */
629 u32 bytes_in_buffer
; /* Bytes In Buffer (Optional) */
630 } idetape_read_position_result_t
;
633 * Follows structures which are related to the SELECT SENSE / MODE SENSE
634 * packet commands. Those packet commands are still not supported
637 #define IDETAPE_BLOCK_DESCRIPTOR 0
638 #define IDETAPE_CAPABILITIES_PAGE 0x2a
639 #define IDETAPE_PARAMTR_PAGE 0x2b /* Onstream DI-x0 only */
640 #define IDETAPE_BLOCK_SIZE_PAGE 0x30
641 #define IDETAPE_BUFFER_FILLING_PAGE 0x33
644 * Run time configurable parameters.
647 int dsc_rw_frequency
;
648 int dsc_media_access_frequency
;
653 * The variables below are used for the character device interface.
654 * Additional state variables are defined in our ide_drive_t structure.
656 static struct ide_tape_obj
* idetape_devs
[MAX_HWIFS
* MAX_DRIVES
];
658 #define ide_tape_f(file) ((file)->private_data)
660 static struct ide_tape_obj
*ide_tape_chrdev_get(unsigned int i
)
662 struct ide_tape_obj
*tape
= NULL
;
664 mutex_lock(&idetape_ref_mutex
);
665 tape
= idetape_devs
[i
];
667 kref_get(&tape
->kref
);
668 mutex_unlock(&idetape_ref_mutex
);
673 * Function declarations
676 static int idetape_chrdev_release (struct inode
*inode
, struct file
*filp
);
677 static void idetape_write_release (ide_drive_t
*drive
, unsigned int minor
);
680 * Too bad. The drive wants to send us data which we are not ready to accept.
681 * Just throw it away.
683 static void idetape_discard_data (ide_drive_t
*drive
, unsigned int bcount
)
686 (void) HWIF(drive
)->INB(IDE_DATA_REG
);
689 static void idetape_input_buffers (ide_drive_t
*drive
, idetape_pc_t
*pc
, unsigned int bcount
)
691 struct idetape_bh
*bh
= pc
->bh
;
696 printk(KERN_ERR
"ide-tape: bh == NULL in "
697 "idetape_input_buffers\n");
698 idetape_discard_data(drive
, bcount
);
701 count
= min((unsigned int)(bh
->b_size
- atomic_read(&bh
->b_count
)), bcount
);
702 HWIF(drive
)->atapi_input_bytes(drive
, bh
->b_data
+ atomic_read(&bh
->b_count
), count
);
704 atomic_add(count
, &bh
->b_count
);
705 if (atomic_read(&bh
->b_count
) == bh
->b_size
) {
708 atomic_set(&bh
->b_count
, 0);
714 static void idetape_output_buffers (ide_drive_t
*drive
, idetape_pc_t
*pc
, unsigned int bcount
)
716 struct idetape_bh
*bh
= pc
->bh
;
721 printk(KERN_ERR
"ide-tape: bh == NULL in "
722 "idetape_output_buffers\n");
725 count
= min((unsigned int)pc
->b_count
, (unsigned int)bcount
);
726 HWIF(drive
)->atapi_output_bytes(drive
, pc
->b_data
, count
);
729 pc
->b_count
-= count
;
731 pc
->bh
= bh
= bh
->b_reqnext
;
733 pc
->b_data
= bh
->b_data
;
734 pc
->b_count
= atomic_read(&bh
->b_count
);
740 static void idetape_update_buffers (idetape_pc_t
*pc
)
742 struct idetape_bh
*bh
= pc
->bh
;
744 unsigned int bcount
= pc
->actually_transferred
;
746 if (test_bit(PC_WRITING
, &pc
->flags
))
750 printk(KERN_ERR
"ide-tape: bh == NULL in "
751 "idetape_update_buffers\n");
754 count
= min((unsigned int)bh
->b_size
, (unsigned int)bcount
);
755 atomic_set(&bh
->b_count
, count
);
756 if (atomic_read(&bh
->b_count
) == bh
->b_size
)
764 * idetape_next_pc_storage returns a pointer to a place in which we can
765 * safely store a packet command, even though we intend to leave the
766 * driver. A storage space for a maximum of IDETAPE_PC_STACK packet
767 * commands is allocated at initialization time.
769 static idetape_pc_t
*idetape_next_pc_storage (ide_drive_t
*drive
)
771 idetape_tape_t
*tape
= drive
->driver_data
;
773 #if IDETAPE_DEBUG_LOG
774 if (tape
->debug_level
>= 5)
775 printk(KERN_INFO
"ide-tape: pc_stack_index=%d\n",
776 tape
->pc_stack_index
);
777 #endif /* IDETAPE_DEBUG_LOG */
778 if (tape
->pc_stack_index
== IDETAPE_PC_STACK
)
779 tape
->pc_stack_index
=0;
780 return (&tape
->pc_stack
[tape
->pc_stack_index
++]);
784 * idetape_next_rq_storage is used along with idetape_next_pc_storage.
785 * Since we queue packet commands in the request queue, we need to
786 * allocate a request, along with the allocation of a packet command.
789 /**************************************************************
791 * This should get fixed to use kmalloc(.., GFP_ATOMIC) *
792 * followed later on by kfree(). -ml *
794 **************************************************************/
796 static struct request
*idetape_next_rq_storage (ide_drive_t
*drive
)
798 idetape_tape_t
*tape
= drive
->driver_data
;
800 #if IDETAPE_DEBUG_LOG
801 if (tape
->debug_level
>= 5)
802 printk(KERN_INFO
"ide-tape: rq_stack_index=%d\n",
803 tape
->rq_stack_index
);
804 #endif /* IDETAPE_DEBUG_LOG */
805 if (tape
->rq_stack_index
== IDETAPE_PC_STACK
)
806 tape
->rq_stack_index
=0;
807 return (&tape
->rq_stack
[tape
->rq_stack_index
++]);
811 * idetape_init_pc initializes a packet command.
813 static void idetape_init_pc (idetape_pc_t
*pc
)
815 memset(pc
->c
, 0, 12);
818 pc
->request_transfer
= 0;
819 pc
->buffer
= pc
->pc_buffer
;
820 pc
->buffer_size
= IDETAPE_PC_BUFFER_SIZE
;
826 * called on each failed packet command retry to analyze the request sense. We
827 * currently do not utilize this information.
829 static void idetape_analyze_error(ide_drive_t
*drive
, u8
*sense
)
831 idetape_tape_t
*tape
= drive
->driver_data
;
832 idetape_pc_t
*pc
= tape
->failed_pc
;
834 tape
->sense_key
= sense
[2] & 0xF;
835 tape
->asc
= sense
[12];
836 tape
->ascq
= sense
[13];
837 #if IDETAPE_DEBUG_LOG
839 * Without debugging, we only log an error if we decided to give up
842 if (tape
->debug_level
>= 1)
843 printk(KERN_INFO
"ide-tape: pc = %x, sense key = %x, "
844 "asc = %x, ascq = %x\n",
845 pc
->c
[0], tape
->sense_key
,
846 tape
->asc
, tape
->ascq
);
847 #endif /* IDETAPE_DEBUG_LOG */
849 /* Correct pc->actually_transferred by asking the tape. */
850 if (test_bit(PC_DMA_ERROR
, &pc
->flags
)) {
851 pc
->actually_transferred
= pc
->request_transfer
-
852 tape
->tape_block_size
*
853 ntohl(get_unaligned((u32
*)&sense
[3]));
854 idetape_update_buffers(pc
);
858 * If error was the result of a zero-length read or write command,
859 * with sense key=5, asc=0x22, ascq=0, let it slide. Some drives
860 * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
862 if ((pc
->c
[0] == IDETAPE_READ_CMD
|| pc
->c
[0] == IDETAPE_WRITE_CMD
)
864 && pc
->c
[4] == 0 && pc
->c
[3] == 0 && pc
->c
[2] == 0) {
865 if (tape
->sense_key
== 5) {
866 /* don't report an error, everything's ok */
868 /* don't retry read/write */
869 set_bit(PC_ABORT
, &pc
->flags
);
872 if (pc
->c
[0] == IDETAPE_READ_CMD
&& (sense
[2] & 0x80)) {
873 pc
->error
= IDETAPE_ERROR_FILEMARK
;
874 set_bit(PC_ABORT
, &pc
->flags
);
876 if (pc
->c
[0] == IDETAPE_WRITE_CMD
) {
877 if ((sense
[2] & 0x40) || (tape
->sense_key
== 0xd
878 && tape
->asc
== 0x0 && tape
->ascq
== 0x2)) {
879 pc
->error
= IDETAPE_ERROR_EOD
;
880 set_bit(PC_ABORT
, &pc
->flags
);
883 if (pc
->c
[0] == IDETAPE_READ_CMD
|| pc
->c
[0] == IDETAPE_WRITE_CMD
) {
884 if (tape
->sense_key
== 8) {
885 pc
->error
= IDETAPE_ERROR_EOD
;
886 set_bit(PC_ABORT
, &pc
->flags
);
888 if (!test_bit(PC_ABORT
, &pc
->flags
) &&
889 pc
->actually_transferred
)
890 pc
->retries
= IDETAPE_MAX_PC_RETRIES
+ 1;
895 * idetape_active_next_stage will declare the next stage as "active".
897 static void idetape_active_next_stage (ide_drive_t
*drive
)
899 idetape_tape_t
*tape
= drive
->driver_data
;
900 idetape_stage_t
*stage
= tape
->next_stage
;
901 struct request
*rq
= &stage
->rq
;
903 #if IDETAPE_DEBUG_LOG
904 if (tape
->debug_level
>= 4)
905 printk(KERN_INFO
"ide-tape: Reached idetape_active_next_stage\n");
906 #endif /* IDETAPE_DEBUG_LOG */
908 printk(KERN_ERR
"ide-tape: bug: Trying to activate a non existing stage\n");
912 rq
->rq_disk
= tape
->disk
;
914 rq
->special
= (void *)stage
->bh
;
915 tape
->active_data_request
= rq
;
916 tape
->active_stage
= stage
;
917 tape
->next_stage
= stage
->next
;
921 * idetape_increase_max_pipeline_stages is a part of the feedback
922 * loop which tries to find the optimum number of stages. In the
923 * feedback loop, we are starting from a minimum maximum number of
924 * stages, and if we sense that the pipeline is empty, we try to
925 * increase it, until we reach the user compile time memory limit.
927 static void idetape_increase_max_pipeline_stages (ide_drive_t
*drive
)
929 idetape_tape_t
*tape
= drive
->driver_data
;
930 int increase
= (tape
->max_pipeline
- tape
->min_pipeline
) / 10;
932 #if IDETAPE_DEBUG_LOG
933 if (tape
->debug_level
>= 4)
934 printk (KERN_INFO
"ide-tape: Reached idetape_increase_max_pipeline_stages\n");
935 #endif /* IDETAPE_DEBUG_LOG */
937 tape
->max_stages
+= max(increase
, 1);
938 tape
->max_stages
= max(tape
->max_stages
, tape
->min_pipeline
);
939 tape
->max_stages
= min(tape
->max_stages
, tape
->max_pipeline
);
943 * idetape_kfree_stage calls kfree to completely free a stage, along with
944 * its related buffers.
946 static void __idetape_kfree_stage (idetape_stage_t
*stage
)
948 struct idetape_bh
*prev_bh
, *bh
= stage
->bh
;
952 if (bh
->b_data
!= NULL
) {
953 size
= (int) bh
->b_size
;
955 free_page((unsigned long) bh
->b_data
);
957 bh
->b_data
+= PAGE_SIZE
;
967 static void idetape_kfree_stage (idetape_tape_t
*tape
, idetape_stage_t
*stage
)
969 __idetape_kfree_stage(stage
);
973 * idetape_remove_stage_head removes tape->first_stage from the pipeline.
974 * The caller should avoid race conditions.
976 static void idetape_remove_stage_head (ide_drive_t
*drive
)
978 idetape_tape_t
*tape
= drive
->driver_data
;
979 idetape_stage_t
*stage
;
981 #if IDETAPE_DEBUG_LOG
982 if (tape
->debug_level
>= 4)
983 printk(KERN_INFO
"ide-tape: Reached idetape_remove_stage_head\n");
984 #endif /* IDETAPE_DEBUG_LOG */
985 if (tape
->first_stage
== NULL
) {
986 printk(KERN_ERR
"ide-tape: bug: tape->first_stage is NULL\n");
989 if (tape
->active_stage
== tape
->first_stage
) {
990 printk(KERN_ERR
"ide-tape: bug: Trying to free our active pipeline stage\n");
993 stage
= tape
->first_stage
;
994 tape
->first_stage
= stage
->next
;
995 idetape_kfree_stage(tape
, stage
);
997 if (tape
->first_stage
== NULL
) {
998 tape
->last_stage
= NULL
;
999 if (tape
->next_stage
!= NULL
)
1000 printk(KERN_ERR
"ide-tape: bug: tape->next_stage != NULL\n");
1001 if (tape
->nr_stages
)
1002 printk(KERN_ERR
"ide-tape: bug: nr_stages should be 0 now\n");
1007 * This will free all the pipeline stages starting from new_last_stage->next
1008 * to the end of the list, and point tape->last_stage to new_last_stage.
1010 static void idetape_abort_pipeline(ide_drive_t
*drive
,
1011 idetape_stage_t
*new_last_stage
)
1013 idetape_tape_t
*tape
= drive
->driver_data
;
1014 idetape_stage_t
*stage
= new_last_stage
->next
;
1015 idetape_stage_t
*nstage
;
1017 #if IDETAPE_DEBUG_LOG
1018 if (tape
->debug_level
>= 4)
1019 printk(KERN_INFO
"ide-tape: %s: idetape_abort_pipeline called\n", tape
->name
);
1022 nstage
= stage
->next
;
1023 idetape_kfree_stage(tape
, stage
);
1025 --tape
->nr_pending_stages
;
1029 new_last_stage
->next
= NULL
;
1030 tape
->last_stage
= new_last_stage
;
1031 tape
->next_stage
= NULL
;
1035 * idetape_end_request is used to finish servicing a request, and to
1036 * insert a pending pipeline request into the main device queue.
1038 static int idetape_end_request(ide_drive_t
*drive
, int uptodate
, int nr_sects
)
1040 struct request
*rq
= HWGROUP(drive
)->rq
;
1041 idetape_tape_t
*tape
= drive
->driver_data
;
1042 unsigned long flags
;
1044 int remove_stage
= 0;
1045 idetape_stage_t
*active_stage
;
1047 #if IDETAPE_DEBUG_LOG
1048 if (tape
->debug_level
>= 4)
1049 printk(KERN_INFO
"ide-tape: Reached idetape_end_request\n");
1050 #endif /* IDETAPE_DEBUG_LOG */
1053 case 0: error
= IDETAPE_ERROR_GENERAL
; break;
1054 case 1: error
= 0; break;
1055 default: error
= uptodate
;
1059 tape
->failed_pc
= NULL
;
1061 if (!blk_special_request(rq
)) {
1062 ide_end_request(drive
, uptodate
, nr_sects
);
1066 spin_lock_irqsave(&tape
->spinlock
, flags
);
1068 /* The request was a pipelined data transfer request */
1069 if (tape
->active_data_request
== rq
) {
1070 active_stage
= tape
->active_stage
;
1071 tape
->active_stage
= NULL
;
1072 tape
->active_data_request
= NULL
;
1073 tape
->nr_pending_stages
--;
1074 if (rq
->cmd
[0] & REQ_IDETAPE_WRITE
) {
1077 set_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
);
1078 if (error
== IDETAPE_ERROR_EOD
)
1079 idetape_abort_pipeline(drive
, active_stage
);
1081 } else if (rq
->cmd
[0] & REQ_IDETAPE_READ
) {
1082 if (error
== IDETAPE_ERROR_EOD
) {
1083 set_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
);
1084 idetape_abort_pipeline(drive
, active_stage
);
1087 if (tape
->next_stage
!= NULL
) {
1088 idetape_active_next_stage(drive
);
1091 * Insert the next request into the request queue.
1093 (void) ide_do_drive_cmd(drive
, tape
->active_data_request
, ide_end
);
1094 } else if (!error
) {
1095 idetape_increase_max_pipeline_stages(drive
);
1098 ide_end_drive_cmd(drive
, 0, 0);
1099 // blkdev_dequeue_request(rq);
1100 // drive->rq = NULL;
1101 // end_that_request_last(rq);
1104 idetape_remove_stage_head(drive
);
1105 if (tape
->active_data_request
== NULL
)
1106 clear_bit(IDETAPE_PIPELINE_ACTIVE
, &tape
->flags
);
1107 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
1111 static ide_startstop_t
idetape_request_sense_callback (ide_drive_t
*drive
)
1113 idetape_tape_t
*tape
= drive
->driver_data
;
1115 #if IDETAPE_DEBUG_LOG
1116 if (tape
->debug_level
>= 4)
1117 printk(KERN_INFO
"ide-tape: Reached idetape_request_sense_callback\n");
1118 #endif /* IDETAPE_DEBUG_LOG */
1119 if (!tape
->pc
->error
) {
1120 idetape_analyze_error(drive
, tape
->pc
->buffer
);
1121 idetape_end_request(drive
, 1, 0);
1123 printk(KERN_ERR
"ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
1124 idetape_end_request(drive
, 0, 0);
1129 static void idetape_create_request_sense_cmd (idetape_pc_t
*pc
)
1131 idetape_init_pc(pc
);
1132 pc
->c
[0] = IDETAPE_REQUEST_SENSE_CMD
;
1134 pc
->request_transfer
= 20;
1135 pc
->callback
= &idetape_request_sense_callback
;
1138 static void idetape_init_rq(struct request
*rq
, u8 cmd
)
1140 memset(rq
, 0, sizeof(*rq
));
1141 rq
->cmd_type
= REQ_TYPE_SPECIAL
;
1146 * idetape_queue_pc_head generates a new packet command request in front
1147 * of the request queue, before the current request, so that it will be
1148 * processed immediately, on the next pass through the driver.
1150 * idetape_queue_pc_head is called from the request handling part of
1151 * the driver (the "bottom" part). Safe storage for the request should
1152 * be allocated with idetape_next_pc_storage and idetape_next_rq_storage
1153 * before calling idetape_queue_pc_head.
1155 * Memory for those requests is pre-allocated at initialization time, and
1156 * is limited to IDETAPE_PC_STACK requests. We assume that we have enough
1157 * space for the maximum possible number of inter-dependent packet commands.
1159 * The higher level of the driver - The ioctl handler and the character
1160 * device handling functions should queue request to the lower level part
1161 * and wait for their completion using idetape_queue_pc_tail or
1162 * idetape_queue_rw_tail.
1164 static void idetape_queue_pc_head (ide_drive_t
*drive
, idetape_pc_t
*pc
,struct request
*rq
)
1166 struct ide_tape_obj
*tape
= drive
->driver_data
;
1168 idetape_init_rq(rq
, REQ_IDETAPE_PC1
);
1169 rq
->buffer
= (char *) pc
;
1170 rq
->rq_disk
= tape
->disk
;
1171 (void) ide_do_drive_cmd(drive
, rq
, ide_preempt
);
1175 * idetape_retry_pc is called when an error was detected during the
1176 * last packet command. We queue a request sense packet command in
1177 * the head of the request list.
1179 static ide_startstop_t
idetape_retry_pc (ide_drive_t
*drive
)
1181 idetape_tape_t
*tape
= drive
->driver_data
;
1185 (void)drive
->hwif
->INB(IDE_ERROR_REG
);
1186 pc
= idetape_next_pc_storage(drive
);
1187 rq
= idetape_next_rq_storage(drive
);
1188 idetape_create_request_sense_cmd(pc
);
1189 set_bit(IDETAPE_IGNORE_DSC
, &tape
->flags
);
1190 idetape_queue_pc_head(drive
, pc
, rq
);
1195 * idetape_postpone_request postpones the current request so that
1196 * ide.c will be able to service requests from another device on
1197 * the same hwgroup while we are polling for DSC.
1199 static void idetape_postpone_request (ide_drive_t
*drive
)
1201 idetape_tape_t
*tape
= drive
->driver_data
;
1203 #if IDETAPE_DEBUG_LOG
1204 if (tape
->debug_level
>= 4)
1205 printk(KERN_INFO
"ide-tape: idetape_postpone_request\n");
1207 tape
->postponed_rq
= HWGROUP(drive
)->rq
;
1208 ide_stall_queue(drive
, tape
->dsc_polling_frequency
);
1212 * idetape_pc_intr is the usual interrupt handler which will be called
1213 * during a packet command. We will transfer some of the data (as
1214 * requested by the drive) and will re-point interrupt handler to us.
1215 * When data transfer is finished, we will act according to the
1216 * algorithm described before idetape_issue_packet_command.
1219 static ide_startstop_t
idetape_pc_intr (ide_drive_t
*drive
)
1221 ide_hwif_t
*hwif
= drive
->hwif
;
1222 idetape_tape_t
*tape
= drive
->driver_data
;
1223 idetape_pc_t
*pc
= tape
->pc
;
1226 static int error_sim_count
= 0;
1231 #if IDETAPE_DEBUG_LOG
1232 if (tape
->debug_level
>= 4)
1233 printk(KERN_INFO
"ide-tape: Reached idetape_pc_intr "
1234 "interrupt handler\n");
1235 #endif /* IDETAPE_DEBUG_LOG */
1237 /* Clear the interrupt */
1238 stat
= hwif
->INB(IDE_STATUS_REG
);
1240 if (test_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
)) {
1241 if (hwif
->ide_dma_end(drive
) || (stat
& ERR_STAT
)) {
1243 * A DMA error is sometimes expected. For example,
1244 * if the tape is crossing a filemark during a
1245 * READ command, it will issue an irq and position
1246 * itself before the filemark, so that only a partial
1247 * data transfer will occur (which causes the DMA
1248 * error). In that case, we will later ask the tape
1249 * how much bytes of the original request were
1250 * actually transferred (we can't receive that
1251 * information from the DMA engine on most chipsets).
1255 * On the contrary, a DMA error is never expected;
1256 * it usually indicates a hardware error or abort.
1257 * If the tape crosses a filemark during a READ
1258 * command, it will issue an irq and position itself
1259 * after the filemark (not before). Only a partial
1260 * data transfer will occur, but no DMA error.
1263 set_bit(PC_DMA_ERROR
, &pc
->flags
);
1265 pc
->actually_transferred
= pc
->request_transfer
;
1266 idetape_update_buffers(pc
);
1268 #if IDETAPE_DEBUG_LOG
1269 if (tape
->debug_level
>= 4)
1270 printk(KERN_INFO
"ide-tape: DMA finished\n");
1271 #endif /* IDETAPE_DEBUG_LOG */
1274 /* No more interrupts */
1275 if ((stat
& DRQ_STAT
) == 0) {
1276 #if IDETAPE_DEBUG_LOG
1277 if (tape
->debug_level
>= 2)
1278 printk(KERN_INFO
"ide-tape: Packet command completed, %d bytes transferred\n", pc
->actually_transferred
);
1279 #endif /* IDETAPE_DEBUG_LOG */
1280 clear_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
);
1285 if ((pc
->c
[0] == IDETAPE_WRITE_CMD
||
1286 pc
->c
[0] == IDETAPE_READ_CMD
) &&
1287 (++error_sim_count
% 100) == 0) {
1288 printk(KERN_INFO
"ide-tape: %s: simulating error\n",
1293 if ((stat
& ERR_STAT
) && pc
->c
[0] == IDETAPE_REQUEST_SENSE_CMD
)
1295 if ((stat
& ERR_STAT
) || test_bit(PC_DMA_ERROR
, &pc
->flags
)) {
1296 /* Error detected */
1297 #if IDETAPE_DEBUG_LOG
1298 if (tape
->debug_level
>= 1)
1299 printk(KERN_INFO
"ide-tape: %s: I/O error\n",
1301 #endif /* IDETAPE_DEBUG_LOG */
1302 if (pc
->c
[0] == IDETAPE_REQUEST_SENSE_CMD
) {
1303 printk(KERN_ERR
"ide-tape: I/O error in request sense command\n");
1304 return ide_do_reset(drive
);
1306 #if IDETAPE_DEBUG_LOG
1307 if (tape
->debug_level
>= 1)
1308 printk(KERN_INFO
"ide-tape: [cmd %x]: check condition\n", pc
->c
[0]);
1310 /* Retry operation */
1311 return idetape_retry_pc(drive
);
1314 if (test_bit(PC_WAIT_FOR_DSC
, &pc
->flags
) &&
1315 (stat
& SEEK_STAT
) == 0) {
1316 /* Media access command */
1317 tape
->dsc_polling_start
= jiffies
;
1318 tape
->dsc_polling_frequency
= IDETAPE_DSC_MA_FAST
;
1319 tape
->dsc_timeout
= jiffies
+ IDETAPE_DSC_MA_TIMEOUT
;
1320 /* Allow ide.c to handle other requests */
1321 idetape_postpone_request(drive
);
1324 if (tape
->failed_pc
== pc
)
1325 tape
->failed_pc
= NULL
;
1326 /* Command finished - Call the callback function */
1327 return pc
->callback(drive
);
1329 if (test_and_clear_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
)) {
1330 printk(KERN_ERR
"ide-tape: The tape wants to issue more "
1331 "interrupts in DMA mode\n");
1332 printk(KERN_ERR
"ide-tape: DMA disabled, reverting to PIO\n");
1334 return ide_do_reset(drive
);
1336 /* Get the number of bytes to transfer on this interrupt. */
1337 bcount
= (hwif
->INB(IDE_BCOUNTH_REG
) << 8) |
1338 hwif
->INB(IDE_BCOUNTL_REG
);
1340 ireason
= hwif
->INB(IDE_IREASON_REG
);
1343 printk(KERN_ERR
"ide-tape: CoD != 0 in idetape_pc_intr\n");
1344 return ide_do_reset(drive
);
1346 if (((ireason
& IO
) == IO
) == test_bit(PC_WRITING
, &pc
->flags
)) {
1347 /* Hopefully, we will never get here */
1348 printk(KERN_ERR
"ide-tape: We wanted to %s, ",
1349 (ireason
& IO
) ? "Write" : "Read");
1350 printk(KERN_ERR
"ide-tape: but the tape wants us to %s !\n",
1351 (ireason
& IO
) ? "Read" : "Write");
1352 return ide_do_reset(drive
);
1354 if (!test_bit(PC_WRITING
, &pc
->flags
)) {
1355 /* Reading - Check that we have enough space */
1356 temp
= pc
->actually_transferred
+ bcount
;
1357 if (temp
> pc
->request_transfer
) {
1358 if (temp
> pc
->buffer_size
) {
1359 printk(KERN_ERR
"ide-tape: The tape wants to send us more data than expected - discarding data\n");
1360 idetape_discard_data(drive
, bcount
);
1361 ide_set_handler(drive
, &idetape_pc_intr
, IDETAPE_WAIT_CMD
, NULL
);
1364 #if IDETAPE_DEBUG_LOG
1365 if (tape
->debug_level
>= 2)
1366 printk(KERN_NOTICE
"ide-tape: The tape wants to send us more data than expected - allowing transfer\n");
1367 #endif /* IDETAPE_DEBUG_LOG */
1370 if (test_bit(PC_WRITING
, &pc
->flags
)) {
1372 idetape_output_buffers(drive
, pc
, bcount
);
1374 /* Write the current buffer */
1375 hwif
->atapi_output_bytes(drive
, pc
->current_position
,
1379 idetape_input_buffers(drive
, pc
, bcount
);
1381 /* Read the current buffer */
1382 hwif
->atapi_input_bytes(drive
, pc
->current_position
,
1385 /* Update the current position */
1386 pc
->actually_transferred
+= bcount
;
1387 pc
->current_position
+= bcount
;
1388 #if IDETAPE_DEBUG_LOG
1389 if (tape
->debug_level
>= 2)
1390 printk(KERN_INFO
"ide-tape: [cmd %x] transferred %d bytes "
1391 "on that interrupt\n", pc
->c
[0], bcount
);
1393 /* And set the interrupt handler again */
1394 ide_set_handler(drive
, &idetape_pc_intr
, IDETAPE_WAIT_CMD
, NULL
);
1399 * Packet Command Interface
1401 * The current Packet Command is available in tape->pc, and will not
1402 * change until we finish handling it. Each packet command is associated
1403 * with a callback function that will be called when the command is
1406 * The handling will be done in three stages:
1408 * 1. idetape_issue_packet_command will send the packet command to the
1409 * drive, and will set the interrupt handler to idetape_pc_intr.
1411 * 2. On each interrupt, idetape_pc_intr will be called. This step
1412 * will be repeated until the device signals us that no more
1413 * interrupts will be issued.
1415 * 3. ATAPI Tape media access commands have immediate status with a
1416 * delayed process. In case of a successful initiation of a
1417 * media access packet command, the DSC bit will be set when the
1418 * actual execution of the command is finished.
1419 * Since the tape drive will not issue an interrupt, we have to
1420 * poll for this event. In this case, we define the request as
1421 * "low priority request" by setting rq_status to
1422 * IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and exit
1425 * ide.c will then give higher priority to requests which
1426 * originate from the other device, until will change rq_status
1429 * 4. When the packet command is finished, it will be checked for errors.
1431 * 5. In case an error was found, we queue a request sense packet
1432 * command in front of the request queue and retry the operation
1433 * up to IDETAPE_MAX_PC_RETRIES times.
1435 * 6. In case no error was found, or we decided to give up and not
1436 * to retry again, the callback function will be called and then
1437 * we will handle the next request.
1440 static ide_startstop_t
idetape_transfer_pc(ide_drive_t
*drive
)
1442 ide_hwif_t
*hwif
= drive
->hwif
;
1443 idetape_tape_t
*tape
= drive
->driver_data
;
1444 idetape_pc_t
*pc
= tape
->pc
;
1446 ide_startstop_t startstop
;
1449 if (ide_wait_stat(&startstop
,drive
,DRQ_STAT
,BUSY_STAT
,WAIT_READY
)) {
1450 printk(KERN_ERR
"ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
1453 ireason
= hwif
->INB(IDE_IREASON_REG
);
1454 while (retries
-- && ((ireason
& CD
) == 0 || (ireason
& IO
))) {
1455 printk(KERN_ERR
"ide-tape: (IO,CoD != (0,1) while issuing "
1456 "a packet command, retrying\n");
1458 ireason
= hwif
->INB(IDE_IREASON_REG
);
1460 printk(KERN_ERR
"ide-tape: (IO,CoD != (0,1) while "
1461 "issuing a packet command, ignoring\n");
1466 if ((ireason
& CD
) == 0 || (ireason
& IO
)) {
1467 printk(KERN_ERR
"ide-tape: (IO,CoD) != (0,1) while issuing "
1468 "a packet command\n");
1469 return ide_do_reset(drive
);
1471 /* Set the interrupt routine */
1472 ide_set_handler(drive
, &idetape_pc_intr
, IDETAPE_WAIT_CMD
, NULL
);
1473 #ifdef CONFIG_BLK_DEV_IDEDMA
1474 /* Begin DMA, if necessary */
1475 if (test_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
))
1476 hwif
->dma_start(drive
);
1478 /* Send the actual packet */
1479 HWIF(drive
)->atapi_output_bytes(drive
, pc
->c
, 12);
1483 static ide_startstop_t
idetape_issue_packet_command (ide_drive_t
*drive
, idetape_pc_t
*pc
)
1485 ide_hwif_t
*hwif
= drive
->hwif
;
1486 idetape_tape_t
*tape
= drive
->driver_data
;
1490 if (tape
->pc
->c
[0] == IDETAPE_REQUEST_SENSE_CMD
&&
1491 pc
->c
[0] == IDETAPE_REQUEST_SENSE_CMD
) {
1492 printk(KERN_ERR
"ide-tape: possible ide-tape.c bug - "
1493 "Two request sense in serial were issued\n");
1496 if (tape
->failed_pc
== NULL
&& pc
->c
[0] != IDETAPE_REQUEST_SENSE_CMD
)
1497 tape
->failed_pc
= pc
;
1498 /* Set the current packet command */
1501 if (pc
->retries
> IDETAPE_MAX_PC_RETRIES
||
1502 test_bit(PC_ABORT
, &pc
->flags
)) {
1504 * We will "abort" retrying a packet command in case
1505 * a legitimate error code was received (crossing a
1506 * filemark, or end of the media, for example).
1508 if (!test_bit(PC_ABORT
, &pc
->flags
)) {
1509 if (!(pc
->c
[0] == IDETAPE_TEST_UNIT_READY_CMD
&&
1510 tape
->sense_key
== 2 && tape
->asc
== 4 &&
1511 (tape
->ascq
== 1 || tape
->ascq
== 8))) {
1512 printk(KERN_ERR
"ide-tape: %s: I/O error, "
1513 "pc = %2x, key = %2x, "
1514 "asc = %2x, ascq = %2x\n",
1515 tape
->name
, pc
->c
[0],
1516 tape
->sense_key
, tape
->asc
,
1520 pc
->error
= IDETAPE_ERROR_GENERAL
;
1522 tape
->failed_pc
= NULL
;
1523 return pc
->callback(drive
);
1525 #if IDETAPE_DEBUG_LOG
1526 if (tape
->debug_level
>= 2)
1527 printk(KERN_INFO
"ide-tape: Retry number - %d, cmd = %02X\n", pc
->retries
, pc
->c
[0]);
1528 #endif /* IDETAPE_DEBUG_LOG */
1531 /* We haven't transferred any data yet */
1532 pc
->actually_transferred
= 0;
1533 pc
->current_position
= pc
->buffer
;
1534 /* Request to transfer the entire buffer at once */
1535 bcount
= pc
->request_transfer
;
1537 if (test_and_clear_bit(PC_DMA_ERROR
, &pc
->flags
)) {
1538 printk(KERN_WARNING
"ide-tape: DMA disabled, "
1539 "reverting to PIO\n");
1542 if (test_bit(PC_DMA_RECOMMENDED
, &pc
->flags
) && drive
->using_dma
)
1543 dma_ok
= !hwif
->dma_setup(drive
);
1545 ide_pktcmd_tf_load(drive
, IDE_TFLAG_NO_SELECT_MASK
|
1546 IDE_TFLAG_OUT_DEVICE
, bcount
, dma_ok
);
1548 if (dma_ok
) /* Will begin DMA later */
1549 set_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
);
1550 if (test_bit(IDETAPE_DRQ_INTERRUPT
, &tape
->flags
)) {
1551 ide_execute_command(drive
, WIN_PACKETCMD
, &idetape_transfer_pc
,
1552 IDETAPE_WAIT_CMD
, NULL
);
1555 hwif
->OUTB(WIN_PACKETCMD
, IDE_COMMAND_REG
);
1556 return idetape_transfer_pc(drive
);
1561 * General packet command callback function.
1563 static ide_startstop_t
idetape_pc_callback (ide_drive_t
*drive
)
1565 idetape_tape_t
*tape
= drive
->driver_data
;
1567 #if IDETAPE_DEBUG_LOG
1568 if (tape
->debug_level
>= 4)
1569 printk(KERN_INFO
"ide-tape: Reached idetape_pc_callback\n");
1570 #endif /* IDETAPE_DEBUG_LOG */
1572 idetape_end_request(drive
, tape
->pc
->error
? 0 : 1, 0);
1577 * A mode sense command is used to "sense" tape parameters.
1579 static void idetape_create_mode_sense_cmd (idetape_pc_t
*pc
, u8 page_code
)
1581 idetape_init_pc(pc
);
1582 pc
->c
[0] = IDETAPE_MODE_SENSE_CMD
;
1583 if (page_code
!= IDETAPE_BLOCK_DESCRIPTOR
)
1584 pc
->c
[1] = 8; /* DBD = 1 - Don't return block descriptors */
1585 pc
->c
[2] = page_code
;
1587 * Changed pc->c[3] to 0 (255 will at best return unused info).
1589 * For SCSI this byte is defined as subpage instead of high byte
1590 * of length and some IDE drives seem to interpret it this way
1591 * and return an error when 255 is used.
1594 pc
->c
[4] = 255; /* (We will just discard data in that case) */
1595 if (page_code
== IDETAPE_BLOCK_DESCRIPTOR
)
1596 pc
->request_transfer
= 12;
1597 else if (page_code
== IDETAPE_CAPABILITIES_PAGE
)
1598 pc
->request_transfer
= 24;
1600 pc
->request_transfer
= 50;
1601 pc
->callback
= &idetape_pc_callback
;
1604 static void calculate_speeds(ide_drive_t
*drive
)
1606 idetape_tape_t
*tape
= drive
->driver_data
;
1607 int full
= 125, empty
= 75;
1609 if (time_after(jiffies
, tape
->controlled_pipeline_head_time
+ 120 * HZ
)) {
1610 tape
->controlled_previous_pipeline_head
= tape
->controlled_last_pipeline_head
;
1611 tape
->controlled_previous_head_time
= tape
->controlled_pipeline_head_time
;
1612 tape
->controlled_last_pipeline_head
= tape
->pipeline_head
;
1613 tape
->controlled_pipeline_head_time
= jiffies
;
1615 if (time_after(jiffies
, tape
->controlled_pipeline_head_time
+ 60 * HZ
))
1616 tape
->controlled_pipeline_head_speed
= (tape
->pipeline_head
- tape
->controlled_last_pipeline_head
) * 32 * HZ
/ (jiffies
- tape
->controlled_pipeline_head_time
);
1617 else if (time_after(jiffies
, tape
->controlled_previous_head_time
))
1618 tape
->controlled_pipeline_head_speed
= (tape
->pipeline_head
- tape
->controlled_previous_pipeline_head
) * 32 * HZ
/ (jiffies
- tape
->controlled_previous_head_time
);
1620 if (tape
->nr_pending_stages
< tape
->max_stages
/*- 1 */) {
1621 /* -1 for read mode error recovery */
1622 if (time_after(jiffies
, tape
->uncontrolled_previous_head_time
+ 10 * HZ
)) {
1623 tape
->uncontrolled_pipeline_head_time
= jiffies
;
1624 tape
->uncontrolled_pipeline_head_speed
= (tape
->pipeline_head
- tape
->uncontrolled_previous_pipeline_head
) * 32 * HZ
/ (jiffies
- tape
->uncontrolled_previous_head_time
);
1627 tape
->uncontrolled_previous_head_time
= jiffies
;
1628 tape
->uncontrolled_previous_pipeline_head
= tape
->pipeline_head
;
1629 if (time_after(jiffies
, tape
->uncontrolled_pipeline_head_time
+ 30 * HZ
)) {
1630 tape
->uncontrolled_pipeline_head_time
= jiffies
;
1633 tape
->pipeline_head_speed
= max(tape
->uncontrolled_pipeline_head_speed
, tape
->controlled_pipeline_head_speed
);
1634 if (tape
->speed_control
== 0) {
1635 tape
->max_insert_speed
= 5000;
1636 } else if (tape
->speed_control
== 1) {
1637 if (tape
->nr_pending_stages
>= tape
->max_stages
/ 2)
1638 tape
->max_insert_speed
= tape
->pipeline_head_speed
+
1639 (1100 - tape
->pipeline_head_speed
) * 2 * (tape
->nr_pending_stages
- tape
->max_stages
/ 2) / tape
->max_stages
;
1641 tape
->max_insert_speed
= 500 +
1642 (tape
->pipeline_head_speed
- 500) * 2 * tape
->nr_pending_stages
/ tape
->max_stages
;
1643 if (tape
->nr_pending_stages
>= tape
->max_stages
* 99 / 100)
1644 tape
->max_insert_speed
= 5000;
1645 } else if (tape
->speed_control
== 2) {
1646 tape
->max_insert_speed
= tape
->pipeline_head_speed
* empty
/ 100 +
1647 (tape
->pipeline_head_speed
* full
/ 100 - tape
->pipeline_head_speed
* empty
/ 100) * tape
->nr_pending_stages
/ tape
->max_stages
;
1649 tape
->max_insert_speed
= tape
->speed_control
;
1650 tape
->max_insert_speed
= max(tape
->max_insert_speed
, 500);
1653 static ide_startstop_t
idetape_media_access_finished (ide_drive_t
*drive
)
1655 idetape_tape_t
*tape
= drive
->driver_data
;
1656 idetape_pc_t
*pc
= tape
->pc
;
1659 stat
= drive
->hwif
->INB(IDE_STATUS_REG
);
1660 if (stat
& SEEK_STAT
) {
1661 if (stat
& ERR_STAT
) {
1662 /* Error detected */
1663 if (pc
->c
[0] != IDETAPE_TEST_UNIT_READY_CMD
)
1664 printk(KERN_ERR
"ide-tape: %s: I/O error, ",
1666 /* Retry operation */
1667 return idetape_retry_pc(drive
);
1670 if (tape
->failed_pc
== pc
)
1671 tape
->failed_pc
= NULL
;
1673 pc
->error
= IDETAPE_ERROR_GENERAL
;
1674 tape
->failed_pc
= NULL
;
1676 return pc
->callback(drive
);
1679 static ide_startstop_t
idetape_rw_callback (ide_drive_t
*drive
)
1681 idetape_tape_t
*tape
= drive
->driver_data
;
1682 struct request
*rq
= HWGROUP(drive
)->rq
;
1683 int blocks
= tape
->pc
->actually_transferred
/ tape
->tape_block_size
;
1685 tape
->avg_size
+= blocks
* tape
->tape_block_size
;
1686 tape
->insert_size
+= blocks
* tape
->tape_block_size
;
1687 if (tape
->insert_size
> 1024 * 1024)
1688 tape
->measure_insert_time
= 1;
1689 if (tape
->measure_insert_time
) {
1690 tape
->measure_insert_time
= 0;
1691 tape
->insert_time
= jiffies
;
1692 tape
->insert_size
= 0;
1694 if (time_after(jiffies
, tape
->insert_time
))
1695 tape
->insert_speed
= tape
->insert_size
/ 1024 * HZ
/ (jiffies
- tape
->insert_time
);
1696 if (time_after_eq(jiffies
, tape
->avg_time
+ HZ
)) {
1697 tape
->avg_speed
= tape
->avg_size
* HZ
/ (jiffies
- tape
->avg_time
) / 1024;
1699 tape
->avg_time
= jiffies
;
1702 #if IDETAPE_DEBUG_LOG
1703 if (tape
->debug_level
>= 4)
1704 printk(KERN_INFO
"ide-tape: Reached idetape_rw_callback\n");
1705 #endif /* IDETAPE_DEBUG_LOG */
1707 tape
->first_frame_position
+= blocks
;
1708 rq
->current_nr_sectors
-= blocks
;
1710 if (!tape
->pc
->error
)
1711 idetape_end_request(drive
, 1, 0);
1713 idetape_end_request(drive
, tape
->pc
->error
, 0);
1717 static void idetape_create_read_cmd(idetape_tape_t
*tape
, idetape_pc_t
*pc
, unsigned int length
, struct idetape_bh
*bh
)
1719 idetape_init_pc(pc
);
1720 pc
->c
[0] = IDETAPE_READ_CMD
;
1721 put_unaligned(htonl(length
), (unsigned int *) &pc
->c
[1]);
1723 pc
->callback
= &idetape_rw_callback
;
1725 atomic_set(&bh
->b_count
, 0);
1727 pc
->request_transfer
= pc
->buffer_size
= length
* tape
->tape_block_size
;
1728 if (pc
->request_transfer
== tape
->stage_size
)
1729 set_bit(PC_DMA_RECOMMENDED
, &pc
->flags
);
1732 static void idetape_create_read_buffer_cmd(idetape_tape_t
*tape
, idetape_pc_t
*pc
, unsigned int length
, struct idetape_bh
*bh
)
1735 struct idetape_bh
*p
= bh
;
1737 idetape_init_pc(pc
);
1738 pc
->c
[0] = IDETAPE_READ_BUFFER_CMD
;
1739 pc
->c
[1] = IDETAPE_RETRIEVE_FAULTY_BLOCK
;
1740 pc
->c
[7] = size
>> 8;
1741 pc
->c
[8] = size
& 0xff;
1742 pc
->callback
= &idetape_pc_callback
;
1744 atomic_set(&bh
->b_count
, 0);
1747 atomic_set(&p
->b_count
, 0);
1750 pc
->request_transfer
= pc
->buffer_size
= size
;
1753 static void idetape_create_write_cmd(idetape_tape_t
*tape
, idetape_pc_t
*pc
, unsigned int length
, struct idetape_bh
*bh
)
1755 idetape_init_pc(pc
);
1756 pc
->c
[0] = IDETAPE_WRITE_CMD
;
1757 put_unaligned(htonl(length
), (unsigned int *) &pc
->c
[1]);
1759 pc
->callback
= &idetape_rw_callback
;
1760 set_bit(PC_WRITING
, &pc
->flags
);
1762 pc
->b_data
= bh
->b_data
;
1763 pc
->b_count
= atomic_read(&bh
->b_count
);
1765 pc
->request_transfer
= pc
->buffer_size
= length
* tape
->tape_block_size
;
1766 if (pc
->request_transfer
== tape
->stage_size
)
1767 set_bit(PC_DMA_RECOMMENDED
, &pc
->flags
);
1771 * idetape_do_request is our request handling function.
1773 static ide_startstop_t
idetape_do_request(ide_drive_t
*drive
,
1774 struct request
*rq
, sector_t block
)
1776 idetape_tape_t
*tape
= drive
->driver_data
;
1777 idetape_pc_t
*pc
= NULL
;
1778 struct request
*postponed_rq
= tape
->postponed_rq
;
1781 #if IDETAPE_DEBUG_LOG
1782 if (tape
->debug_level
>= 2)
1783 printk(KERN_INFO
"ide-tape: sector: %ld, "
1784 "nr_sectors: %ld, current_nr_sectors: %d\n",
1785 rq
->sector
, rq
->nr_sectors
, rq
->current_nr_sectors
);
1786 #endif /* IDETAPE_DEBUG_LOG */
1788 if (!blk_special_request(rq
)) {
1790 * We do not support buffer cache originated requests.
1792 printk(KERN_NOTICE
"ide-tape: %s: Unsupported request in "
1793 "request queue (%d)\n", drive
->name
, rq
->cmd_type
);
1794 ide_end_request(drive
, 0, 0);
1799 * Retry a failed packet command
1801 if (tape
->failed_pc
!= NULL
&&
1802 tape
->pc
->c
[0] == IDETAPE_REQUEST_SENSE_CMD
) {
1803 return idetape_issue_packet_command(drive
, tape
->failed_pc
);
1805 if (postponed_rq
!= NULL
)
1806 if (rq
!= postponed_rq
) {
1807 printk(KERN_ERR
"ide-tape: ide-tape.c bug - "
1808 "Two DSC requests were queued\n");
1809 idetape_end_request(drive
, 0, 0);
1813 tape
->postponed_rq
= NULL
;
1816 * If the tape is still busy, postpone our request and service
1817 * the other device meanwhile.
1819 stat
= drive
->hwif
->INB(IDE_STATUS_REG
);
1821 if (!drive
->dsc_overlap
&& !(rq
->cmd
[0] & REQ_IDETAPE_PC2
))
1822 set_bit(IDETAPE_IGNORE_DSC
, &tape
->flags
);
1824 if (drive
->post_reset
== 1) {
1825 set_bit(IDETAPE_IGNORE_DSC
, &tape
->flags
);
1826 drive
->post_reset
= 0;
1829 if (tape
->tape_still_time
> 100 && tape
->tape_still_time
< 200)
1830 tape
->measure_insert_time
= 1;
1831 if (time_after(jiffies
, tape
->insert_time
))
1832 tape
->insert_speed
= tape
->insert_size
/ 1024 * HZ
/ (jiffies
- tape
->insert_time
);
1833 calculate_speeds(drive
);
1834 if (!test_and_clear_bit(IDETAPE_IGNORE_DSC
, &tape
->flags
) &&
1835 (stat
& SEEK_STAT
) == 0) {
1836 if (postponed_rq
== NULL
) {
1837 tape
->dsc_polling_start
= jiffies
;
1838 tape
->dsc_polling_frequency
= tape
->best_dsc_rw_frequency
;
1839 tape
->dsc_timeout
= jiffies
+ IDETAPE_DSC_RW_TIMEOUT
;
1840 } else if (time_after(jiffies
, tape
->dsc_timeout
)) {
1841 printk(KERN_ERR
"ide-tape: %s: DSC timeout\n",
1843 if (rq
->cmd
[0] & REQ_IDETAPE_PC2
) {
1844 idetape_media_access_finished(drive
);
1847 return ide_do_reset(drive
);
1849 } else if (time_after(jiffies
, tape
->dsc_polling_start
+ IDETAPE_DSC_MA_THRESHOLD
))
1850 tape
->dsc_polling_frequency
= IDETAPE_DSC_MA_SLOW
;
1851 idetape_postpone_request(drive
);
1854 if (rq
->cmd
[0] & REQ_IDETAPE_READ
) {
1855 tape
->buffer_head
++;
1856 tape
->postpone_cnt
= 0;
1857 pc
= idetape_next_pc_storage(drive
);
1858 idetape_create_read_cmd(tape
, pc
, rq
->current_nr_sectors
, (struct idetape_bh
*)rq
->special
);
1861 if (rq
->cmd
[0] & REQ_IDETAPE_WRITE
) {
1862 tape
->buffer_head
++;
1863 tape
->postpone_cnt
= 0;
1864 pc
= idetape_next_pc_storage(drive
);
1865 idetape_create_write_cmd(tape
, pc
, rq
->current_nr_sectors
, (struct idetape_bh
*)rq
->special
);
1868 if (rq
->cmd
[0] & REQ_IDETAPE_READ_BUFFER
) {
1869 tape
->postpone_cnt
= 0;
1870 pc
= idetape_next_pc_storage(drive
);
1871 idetape_create_read_buffer_cmd(tape
, pc
, rq
->current_nr_sectors
, (struct idetape_bh
*)rq
->special
);
1874 if (rq
->cmd
[0] & REQ_IDETAPE_PC1
) {
1875 pc
= (idetape_pc_t
*) rq
->buffer
;
1876 rq
->cmd
[0] &= ~(REQ_IDETAPE_PC1
);
1877 rq
->cmd
[0] |= REQ_IDETAPE_PC2
;
1880 if (rq
->cmd
[0] & REQ_IDETAPE_PC2
) {
1881 idetape_media_access_finished(drive
);
1886 return idetape_issue_packet_command(drive
, pc
);
1890 * Pipeline related functions
1892 static inline int idetape_pipeline_active (idetape_tape_t
*tape
)
1896 rc1
= test_bit(IDETAPE_PIPELINE_ACTIVE
, &tape
->flags
);
1897 rc2
= (tape
->active_data_request
!= NULL
);
1902 * idetape_kmalloc_stage uses __get_free_page to allocate a pipeline
1903 * stage, along with all the necessary small buffers which together make
1904 * a buffer of size tape->stage_size (or a bit more). We attempt to
1905 * combine sequential pages as much as possible.
1907 * Returns a pointer to the new allocated stage, or NULL if we
1908 * can't (or don't want to) allocate a stage.
1910 * Pipeline stages are optional and are used to increase performance.
1911 * If we can't allocate them, we'll manage without them.
1913 static idetape_stage_t
*__idetape_kmalloc_stage (idetape_tape_t
*tape
, int full
, int clear
)
1915 idetape_stage_t
*stage
;
1916 struct idetape_bh
*prev_bh
, *bh
;
1917 int pages
= tape
->pages_per_stage
;
1918 char *b_data
= NULL
;
1920 if ((stage
= kmalloc(sizeof (idetape_stage_t
),GFP_KERNEL
)) == NULL
)
1924 bh
= stage
->bh
= kmalloc(sizeof(struct idetape_bh
), GFP_KERNEL
);
1927 bh
->b_reqnext
= NULL
;
1928 if ((bh
->b_data
= (char *) __get_free_page (GFP_KERNEL
)) == NULL
)
1931 memset(bh
->b_data
, 0, PAGE_SIZE
);
1932 bh
->b_size
= PAGE_SIZE
;
1933 atomic_set(&bh
->b_count
, full
? bh
->b_size
: 0);
1936 if ((b_data
= (char *) __get_free_page (GFP_KERNEL
)) == NULL
)
1939 memset(b_data
, 0, PAGE_SIZE
);
1940 if (bh
->b_data
== b_data
+ PAGE_SIZE
) {
1941 bh
->b_size
+= PAGE_SIZE
;
1942 bh
->b_data
-= PAGE_SIZE
;
1944 atomic_add(PAGE_SIZE
, &bh
->b_count
);
1947 if (b_data
== bh
->b_data
+ bh
->b_size
) {
1948 bh
->b_size
+= PAGE_SIZE
;
1950 atomic_add(PAGE_SIZE
, &bh
->b_count
);
1954 if ((bh
= kmalloc(sizeof(struct idetape_bh
), GFP_KERNEL
)) == NULL
) {
1955 free_page((unsigned long) b_data
);
1958 bh
->b_reqnext
= NULL
;
1959 bh
->b_data
= b_data
;
1960 bh
->b_size
= PAGE_SIZE
;
1961 atomic_set(&bh
->b_count
, full
? bh
->b_size
: 0);
1962 prev_bh
->b_reqnext
= bh
;
1964 bh
->b_size
-= tape
->excess_bh_size
;
1966 atomic_sub(tape
->excess_bh_size
, &bh
->b_count
);
1969 __idetape_kfree_stage(stage
);
1973 static idetape_stage_t
*idetape_kmalloc_stage (idetape_tape_t
*tape
)
1975 idetape_stage_t
*cache_stage
= tape
->cache_stage
;
1977 #if IDETAPE_DEBUG_LOG
1978 if (tape
->debug_level
>= 4)
1979 printk(KERN_INFO
"ide-tape: Reached idetape_kmalloc_stage\n");
1980 #endif /* IDETAPE_DEBUG_LOG */
1982 if (tape
->nr_stages
>= tape
->max_stages
)
1984 if (cache_stage
!= NULL
) {
1985 tape
->cache_stage
= NULL
;
1988 return __idetape_kmalloc_stage(tape
, 0, 0);
1991 static int idetape_copy_stage_from_user (idetape_tape_t
*tape
, idetape_stage_t
*stage
, const char __user
*buf
, int n
)
1993 struct idetape_bh
*bh
= tape
->bh
;
1999 printk(KERN_ERR
"ide-tape: bh == NULL in "
2000 "idetape_copy_stage_from_user\n");
2003 count
= min((unsigned int)(bh
->b_size
- atomic_read(&bh
->b_count
)), (unsigned int)n
);
2004 if (copy_from_user(bh
->b_data
+ atomic_read(&bh
->b_count
), buf
, count
))
2007 atomic_add(count
, &bh
->b_count
);
2009 if (atomic_read(&bh
->b_count
) == bh
->b_size
) {
2012 atomic_set(&bh
->b_count
, 0);
2019 static int idetape_copy_stage_to_user (idetape_tape_t
*tape
, char __user
*buf
, idetape_stage_t
*stage
, int n
)
2021 struct idetape_bh
*bh
= tape
->bh
;
2027 printk(KERN_ERR
"ide-tape: bh == NULL in "
2028 "idetape_copy_stage_to_user\n");
2031 count
= min(tape
->b_count
, n
);
2032 if (copy_to_user(buf
, tape
->b_data
, count
))
2035 tape
->b_data
+= count
;
2036 tape
->b_count
-= count
;
2038 if (!tape
->b_count
) {
2039 tape
->bh
= bh
= bh
->b_reqnext
;
2041 tape
->b_data
= bh
->b_data
;
2042 tape
->b_count
= atomic_read(&bh
->b_count
);
2049 static void idetape_init_merge_stage (idetape_tape_t
*tape
)
2051 struct idetape_bh
*bh
= tape
->merge_stage
->bh
;
2054 if (tape
->chrdev_direction
== idetape_direction_write
)
2055 atomic_set(&bh
->b_count
, 0);
2057 tape
->b_data
= bh
->b_data
;
2058 tape
->b_count
= atomic_read(&bh
->b_count
);
2062 static void idetape_switch_buffers (idetape_tape_t
*tape
, idetape_stage_t
*stage
)
2064 struct idetape_bh
*tmp
;
2067 stage
->bh
= tape
->merge_stage
->bh
;
2068 tape
->merge_stage
->bh
= tmp
;
2069 idetape_init_merge_stage(tape
);
2073 * idetape_add_stage_tail adds a new stage at the end of the pipeline.
2075 static void idetape_add_stage_tail (ide_drive_t
*drive
,idetape_stage_t
*stage
)
2077 idetape_tape_t
*tape
= drive
->driver_data
;
2078 unsigned long flags
;
2080 #if IDETAPE_DEBUG_LOG
2081 if (tape
->debug_level
>= 4)
2082 printk (KERN_INFO
"ide-tape: Reached idetape_add_stage_tail\n");
2083 #endif /* IDETAPE_DEBUG_LOG */
2084 spin_lock_irqsave(&tape
->spinlock
, flags
);
2086 if (tape
->last_stage
!= NULL
)
2087 tape
->last_stage
->next
=stage
;
2089 tape
->first_stage
= tape
->next_stage
=stage
;
2090 tape
->last_stage
= stage
;
2091 if (tape
->next_stage
== NULL
)
2092 tape
->next_stage
= tape
->last_stage
;
2094 tape
->nr_pending_stages
++;
2095 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2099 * idetape_wait_for_request installs a completion in a pending request
2100 * and sleeps until it is serviced.
2102 * The caller should ensure that the request will not be serviced
2103 * before we install the completion (usually by disabling interrupts).
2105 static void idetape_wait_for_request (ide_drive_t
*drive
, struct request
*rq
)
2107 DECLARE_COMPLETION_ONSTACK(wait
);
2108 idetape_tape_t
*tape
= drive
->driver_data
;
2110 if (rq
== NULL
|| !blk_special_request(rq
)) {
2111 printk (KERN_ERR
"ide-tape: bug: Trying to sleep on non-valid request\n");
2114 rq
->end_io_data
= &wait
;
2115 rq
->end_io
= blk_end_sync_rq
;
2116 spin_unlock_irq(&tape
->spinlock
);
2117 wait_for_completion(&wait
);
2118 /* The stage and its struct request have been deallocated */
2119 spin_lock_irq(&tape
->spinlock
);
2122 static ide_startstop_t
idetape_read_position_callback (ide_drive_t
*drive
)
2124 idetape_tape_t
*tape
= drive
->driver_data
;
2125 idetape_read_position_result_t
*result
;
2127 #if IDETAPE_DEBUG_LOG
2128 if (tape
->debug_level
>= 4)
2129 printk(KERN_INFO
"ide-tape: Reached idetape_read_position_callback\n");
2130 #endif /* IDETAPE_DEBUG_LOG */
2132 if (!tape
->pc
->error
) {
2133 result
= (idetape_read_position_result_t
*) tape
->pc
->buffer
;
2134 #if IDETAPE_DEBUG_LOG
2135 if (tape
->debug_level
>= 2)
2136 printk(KERN_INFO
"ide-tape: BOP - %s\n",result
->bop
? "Yes":"No");
2137 if (tape
->debug_level
>= 2)
2138 printk(KERN_INFO
"ide-tape: EOP - %s\n",result
->eop
? "Yes":"No");
2139 #endif /* IDETAPE_DEBUG_LOG */
2141 printk(KERN_INFO
"ide-tape: Block location is unknown to the tape\n");
2142 clear_bit(IDETAPE_ADDRESS_VALID
, &tape
->flags
);
2143 idetape_end_request(drive
, 0, 0);
2145 #if IDETAPE_DEBUG_LOG
2146 if (tape
->debug_level
>= 2)
2147 printk(KERN_INFO
"ide-tape: Block Location - %u\n", ntohl(result
->first_block
));
2148 #endif /* IDETAPE_DEBUG_LOG */
2149 tape
->partition
= result
->partition
;
2150 tape
->first_frame_position
= ntohl(result
->first_block
);
2151 tape
->last_frame_position
= ntohl(result
->last_block
);
2152 tape
->blocks_in_buffer
= result
->blocks_in_buffer
[2];
2153 set_bit(IDETAPE_ADDRESS_VALID
, &tape
->flags
);
2154 idetape_end_request(drive
, 1, 0);
2157 idetape_end_request(drive
, 0, 0);
2163 * idetape_create_write_filemark_cmd will:
2165 * 1. Write a filemark if write_filemark=1.
2166 * 2. Flush the device buffers without writing a filemark
2167 * if write_filemark=0.
2170 static void idetape_create_write_filemark_cmd (ide_drive_t
*drive
, idetape_pc_t
*pc
,int write_filemark
)
2172 idetape_init_pc(pc
);
2173 pc
->c
[0] = IDETAPE_WRITE_FILEMARK_CMD
;
2174 pc
->c
[4] = write_filemark
;
2175 set_bit(PC_WAIT_FOR_DSC
, &pc
->flags
);
2176 pc
->callback
= &idetape_pc_callback
;
2179 static void idetape_create_test_unit_ready_cmd(idetape_pc_t
*pc
)
2181 idetape_init_pc(pc
);
2182 pc
->c
[0] = IDETAPE_TEST_UNIT_READY_CMD
;
2183 pc
->callback
= &idetape_pc_callback
;
2187 * idetape_queue_pc_tail is based on the following functions:
2189 * ide_do_drive_cmd from ide.c
2190 * cdrom_queue_request and cdrom_queue_packet_command from ide-cd.c
2192 * We add a special packet command request to the tail of the request
2193 * queue, and wait for it to be serviced.
2195 * This is not to be called from within the request handling part
2196 * of the driver ! We allocate here data in the stack, and it is valid
2197 * until the request is finished. This is not the case for the bottom
2198 * part of the driver, where we are always leaving the functions to wait
2199 * for an interrupt or a timer event.
2201 * From the bottom part of the driver, we should allocate safe memory
2202 * using idetape_next_pc_storage and idetape_next_rq_storage, and add
2203 * the request to the request list without waiting for it to be serviced !
2204 * In that case, we usually use idetape_queue_pc_head.
2206 static int __idetape_queue_pc_tail (ide_drive_t
*drive
, idetape_pc_t
*pc
)
2208 struct ide_tape_obj
*tape
= drive
->driver_data
;
2211 idetape_init_rq(&rq
, REQ_IDETAPE_PC1
);
2212 rq
.buffer
= (char *) pc
;
2213 rq
.rq_disk
= tape
->disk
;
2214 return ide_do_drive_cmd(drive
, &rq
, ide_wait
);
2217 static void idetape_create_load_unload_cmd (ide_drive_t
*drive
, idetape_pc_t
*pc
,int cmd
)
2219 idetape_init_pc(pc
);
2220 pc
->c
[0] = IDETAPE_LOAD_UNLOAD_CMD
;
2222 set_bit(PC_WAIT_FOR_DSC
, &pc
->flags
);
2223 pc
->callback
= &idetape_pc_callback
;
2226 static int idetape_wait_ready(ide_drive_t
*drive
, unsigned long timeout
)
2228 idetape_tape_t
*tape
= drive
->driver_data
;
2230 int load_attempted
= 0;
2233 * Wait for the tape to become ready
2235 set_bit(IDETAPE_MEDIUM_PRESENT
, &tape
->flags
);
2237 while (time_before(jiffies
, timeout
)) {
2238 idetape_create_test_unit_ready_cmd(&pc
);
2239 if (!__idetape_queue_pc_tail(drive
, &pc
))
2241 if ((tape
->sense_key
== 2 && tape
->asc
== 4 && tape
->ascq
== 2)
2242 || (tape
->asc
== 0x3A)) { /* no media */
2245 idetape_create_load_unload_cmd(drive
, &pc
, IDETAPE_LU_LOAD_MASK
);
2246 __idetape_queue_pc_tail(drive
, &pc
);
2248 /* not about to be ready */
2249 } else if (!(tape
->sense_key
== 2 && tape
->asc
== 4 &&
2250 (tape
->ascq
== 1 || tape
->ascq
== 8)))
2257 static int idetape_queue_pc_tail (ide_drive_t
*drive
,idetape_pc_t
*pc
)
2259 return __idetape_queue_pc_tail(drive
, pc
);
2262 static int idetape_flush_tape_buffers (ide_drive_t
*drive
)
2267 idetape_create_write_filemark_cmd(drive
, &pc
, 0);
2268 if ((rc
= idetape_queue_pc_tail(drive
, &pc
)))
2270 idetape_wait_ready(drive
, 60 * 5 * HZ
);
2274 static void idetape_create_read_position_cmd (idetape_pc_t
*pc
)
2276 idetape_init_pc(pc
);
2277 pc
->c
[0] = IDETAPE_READ_POSITION_CMD
;
2278 pc
->request_transfer
= 20;
2279 pc
->callback
= &idetape_read_position_callback
;
2282 static int idetape_read_position (ide_drive_t
*drive
)
2284 idetape_tape_t
*tape
= drive
->driver_data
;
2288 #if IDETAPE_DEBUG_LOG
2289 if (tape
->debug_level
>= 4)
2290 printk(KERN_INFO
"ide-tape: Reached idetape_read_position\n");
2291 #endif /* IDETAPE_DEBUG_LOG */
2293 idetape_create_read_position_cmd(&pc
);
2294 if (idetape_queue_pc_tail(drive
, &pc
))
2296 position
= tape
->first_frame_position
;
2300 static void idetape_create_locate_cmd (ide_drive_t
*drive
, idetape_pc_t
*pc
, unsigned int block
, u8 partition
, int skip
)
2302 idetape_init_pc(pc
);
2303 pc
->c
[0] = IDETAPE_LOCATE_CMD
;
2305 put_unaligned(htonl(block
), (unsigned int *) &pc
->c
[3]);
2306 pc
->c
[8] = partition
;
2307 set_bit(PC_WAIT_FOR_DSC
, &pc
->flags
);
2308 pc
->callback
= &idetape_pc_callback
;
2311 static int idetape_create_prevent_cmd (ide_drive_t
*drive
, idetape_pc_t
*pc
, int prevent
)
2313 idetape_tape_t
*tape
= drive
->driver_data
;
2315 /* device supports locking according to capabilities page */
2316 if (!(tape
->caps
[6] & 0x01))
2319 idetape_init_pc(pc
);
2320 pc
->c
[0] = IDETAPE_PREVENT_CMD
;
2322 pc
->callback
= &idetape_pc_callback
;
2326 static int __idetape_discard_read_pipeline (ide_drive_t
*drive
)
2328 idetape_tape_t
*tape
= drive
->driver_data
;
2329 unsigned long flags
;
2332 if (tape
->chrdev_direction
!= idetape_direction_read
)
2335 /* Remove merge stage. */
2336 cnt
= tape
->merge_stage_size
/ tape
->tape_block_size
;
2337 if (test_and_clear_bit(IDETAPE_FILEMARK
, &tape
->flags
))
2338 ++cnt
; /* Filemarks count as 1 sector */
2339 tape
->merge_stage_size
= 0;
2340 if (tape
->merge_stage
!= NULL
) {
2341 __idetape_kfree_stage(tape
->merge_stage
);
2342 tape
->merge_stage
= NULL
;
2345 /* Clear pipeline flags. */
2346 clear_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
);
2347 tape
->chrdev_direction
= idetape_direction_none
;
2349 /* Remove pipeline stages. */
2350 if (tape
->first_stage
== NULL
)
2353 spin_lock_irqsave(&tape
->spinlock
, flags
);
2354 tape
->next_stage
= NULL
;
2355 if (idetape_pipeline_active(tape
))
2356 idetape_wait_for_request(drive
, tape
->active_data_request
);
2357 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2359 while (tape
->first_stage
!= NULL
) {
2360 struct request
*rq_ptr
= &tape
->first_stage
->rq
;
2362 cnt
+= rq_ptr
->nr_sectors
- rq_ptr
->current_nr_sectors
;
2363 if (rq_ptr
->errors
== IDETAPE_ERROR_FILEMARK
)
2365 idetape_remove_stage_head(drive
);
2367 tape
->nr_pending_stages
= 0;
2368 tape
->max_stages
= tape
->min_pipeline
;
2373 * idetape_position_tape positions the tape to the requested block
2374 * using the LOCATE packet command. A READ POSITION command is then
2375 * issued to check where we are positioned.
2377 * Like all higher level operations, we queue the commands at the tail
2378 * of the request queue and wait for their completion.
2381 static int idetape_position_tape (ide_drive_t
*drive
, unsigned int block
, u8 partition
, int skip
)
2383 idetape_tape_t
*tape
= drive
->driver_data
;
2387 if (tape
->chrdev_direction
== idetape_direction_read
)
2388 __idetape_discard_read_pipeline(drive
);
2389 idetape_wait_ready(drive
, 60 * 5 * HZ
);
2390 idetape_create_locate_cmd(drive
, &pc
, block
, partition
, skip
);
2391 retval
= idetape_queue_pc_tail(drive
, &pc
);
2395 idetape_create_read_position_cmd(&pc
);
2396 return (idetape_queue_pc_tail(drive
, &pc
));
2399 static void idetape_discard_read_pipeline (ide_drive_t
*drive
, int restore_position
)
2401 idetape_tape_t
*tape
= drive
->driver_data
;
2405 cnt
= __idetape_discard_read_pipeline(drive
);
2406 if (restore_position
) {
2407 position
= idetape_read_position(drive
);
2408 seek
= position
> cnt
? position
- cnt
: 0;
2409 if (idetape_position_tape(drive
, seek
, 0, 0)) {
2410 printk(KERN_INFO
"ide-tape: %s: position_tape failed in discard_pipeline()\n", tape
->name
);
2417 * idetape_queue_rw_tail generates a read/write request for the block
2418 * device interface and wait for it to be serviced.
2420 static int idetape_queue_rw_tail(ide_drive_t
*drive
, int cmd
, int blocks
, struct idetape_bh
*bh
)
2422 idetape_tape_t
*tape
= drive
->driver_data
;
2425 #if IDETAPE_DEBUG_LOG
2426 if (tape
->debug_level
>= 2)
2427 printk(KERN_INFO
"ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd
);
2428 #endif /* IDETAPE_DEBUG_LOG */
2429 if (idetape_pipeline_active(tape
)) {
2430 printk(KERN_ERR
"ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
2434 idetape_init_rq(&rq
, cmd
);
2435 rq
.rq_disk
= tape
->disk
;
2436 rq
.special
= (void *)bh
;
2437 rq
.sector
= tape
->first_frame_position
;
2438 rq
.nr_sectors
= rq
.current_nr_sectors
= blocks
;
2439 (void) ide_do_drive_cmd(drive
, &rq
, ide_wait
);
2441 if ((cmd
& (REQ_IDETAPE_READ
| REQ_IDETAPE_WRITE
)) == 0)
2444 if (tape
->merge_stage
)
2445 idetape_init_merge_stage(tape
);
2446 if (rq
.errors
== IDETAPE_ERROR_GENERAL
)
2448 return (tape
->tape_block_size
* (blocks
-rq
.current_nr_sectors
));
2452 * idetape_insert_pipeline_into_queue is used to start servicing the
2453 * pipeline stages, starting from tape->next_stage.
2455 static void idetape_insert_pipeline_into_queue (ide_drive_t
*drive
)
2457 idetape_tape_t
*tape
= drive
->driver_data
;
2459 if (tape
->next_stage
== NULL
)
2461 if (!idetape_pipeline_active(tape
)) {
2462 set_bit(IDETAPE_PIPELINE_ACTIVE
, &tape
->flags
);
2463 idetape_active_next_stage(drive
);
2464 (void) ide_do_drive_cmd(drive
, tape
->active_data_request
, ide_end
);
2468 static void idetape_create_inquiry_cmd (idetape_pc_t
*pc
)
2470 idetape_init_pc(pc
);
2471 pc
->c
[0] = IDETAPE_INQUIRY_CMD
;
2472 pc
->c
[4] = pc
->request_transfer
= 254;
2473 pc
->callback
= &idetape_pc_callback
;
2476 static void idetape_create_rewind_cmd (ide_drive_t
*drive
, idetape_pc_t
*pc
)
2478 idetape_init_pc(pc
);
2479 pc
->c
[0] = IDETAPE_REWIND_CMD
;
2480 set_bit(PC_WAIT_FOR_DSC
, &pc
->flags
);
2481 pc
->callback
= &idetape_pc_callback
;
2484 static void idetape_create_erase_cmd (idetape_pc_t
*pc
)
2486 idetape_init_pc(pc
);
2487 pc
->c
[0] = IDETAPE_ERASE_CMD
;
2489 set_bit(PC_WAIT_FOR_DSC
, &pc
->flags
);
2490 pc
->callback
= &idetape_pc_callback
;
2493 static void idetape_create_space_cmd (idetape_pc_t
*pc
,int count
, u8 cmd
)
2495 idetape_init_pc(pc
);
2496 pc
->c
[0] = IDETAPE_SPACE_CMD
;
2497 put_unaligned(htonl(count
), (unsigned int *) &pc
->c
[1]);
2499 set_bit(PC_WAIT_FOR_DSC
, &pc
->flags
);
2500 pc
->callback
= &idetape_pc_callback
;
2503 static void idetape_wait_first_stage (ide_drive_t
*drive
)
2505 idetape_tape_t
*tape
= drive
->driver_data
;
2506 unsigned long flags
;
2508 if (tape
->first_stage
== NULL
)
2510 spin_lock_irqsave(&tape
->spinlock
, flags
);
2511 if (tape
->active_stage
== tape
->first_stage
)
2512 idetape_wait_for_request(drive
, tape
->active_data_request
);
2513 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2517 * idetape_add_chrdev_write_request tries to add a character device
2518 * originated write request to our pipeline. In case we don't succeed,
2519 * we revert to non-pipelined operation mode for this request.
2521 * 1. Try to allocate a new pipeline stage.
2522 * 2. If we can't, wait for more and more requests to be serviced
2523 * and try again each time.
2524 * 3. If we still can't allocate a stage, fallback to
2525 * non-pipelined operation mode for this request.
2527 static int idetape_add_chrdev_write_request (ide_drive_t
*drive
, int blocks
)
2529 idetape_tape_t
*tape
= drive
->driver_data
;
2530 idetape_stage_t
*new_stage
;
2531 unsigned long flags
;
2534 #if IDETAPE_DEBUG_LOG
2535 if (tape
->debug_level
>= 3)
2536 printk(KERN_INFO
"ide-tape: Reached idetape_add_chrdev_write_request\n");
2537 #endif /* IDETAPE_DEBUG_LOG */
2540 * Attempt to allocate a new stage.
2541 * Pay special attention to possible race conditions.
2543 while ((new_stage
= idetape_kmalloc_stage(tape
)) == NULL
) {
2544 spin_lock_irqsave(&tape
->spinlock
, flags
);
2545 if (idetape_pipeline_active(tape
)) {
2546 idetape_wait_for_request(drive
, tape
->active_data_request
);
2547 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2549 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2550 idetape_insert_pipeline_into_queue(drive
);
2551 if (idetape_pipeline_active(tape
))
2554 * Linux is short on memory. Fallback to
2555 * non-pipelined operation mode for this request.
2557 return idetape_queue_rw_tail(drive
, REQ_IDETAPE_WRITE
, blocks
, tape
->merge_stage
->bh
);
2560 rq
= &new_stage
->rq
;
2561 idetape_init_rq(rq
, REQ_IDETAPE_WRITE
);
2562 /* Doesn't actually matter - We always assume sequential access */
2563 rq
->sector
= tape
->first_frame_position
;
2564 rq
->nr_sectors
= rq
->current_nr_sectors
= blocks
;
2566 idetape_switch_buffers(tape
, new_stage
);
2567 idetape_add_stage_tail(drive
, new_stage
);
2568 tape
->pipeline_head
++;
2569 calculate_speeds(drive
);
2572 * Estimate whether the tape has stopped writing by checking
2573 * if our write pipeline is currently empty. If we are not
2574 * writing anymore, wait for the pipeline to be full enough
2575 * (90%) before starting to service requests, so that we will
2576 * be able to keep up with the higher speeds of the tape.
2578 if (!idetape_pipeline_active(tape
)) {
2579 if (tape
->nr_stages
>= tape
->max_stages
* 9 / 10 ||
2580 tape
->nr_stages
>= tape
->max_stages
- tape
->uncontrolled_pipeline_head_speed
* 3 * 1024 / tape
->tape_block_size
) {
2581 tape
->measure_insert_time
= 1;
2582 tape
->insert_time
= jiffies
;
2583 tape
->insert_size
= 0;
2584 tape
->insert_speed
= 0;
2585 idetape_insert_pipeline_into_queue(drive
);
2588 if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
))
2589 /* Return a deferred error */
2595 * idetape_wait_for_pipeline will wait until all pending pipeline
2596 * requests are serviced. Typically called on device close.
2598 static void idetape_wait_for_pipeline (ide_drive_t
*drive
)
2600 idetape_tape_t
*tape
= drive
->driver_data
;
2601 unsigned long flags
;
2603 while (tape
->next_stage
|| idetape_pipeline_active(tape
)) {
2604 idetape_insert_pipeline_into_queue(drive
);
2605 spin_lock_irqsave(&tape
->spinlock
, flags
);
2606 if (idetape_pipeline_active(tape
))
2607 idetape_wait_for_request(drive
, tape
->active_data_request
);
2608 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2612 static void idetape_empty_write_pipeline (ide_drive_t
*drive
)
2614 idetape_tape_t
*tape
= drive
->driver_data
;
2616 struct idetape_bh
*bh
;
2618 if (tape
->chrdev_direction
!= idetape_direction_write
) {
2619 printk(KERN_ERR
"ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n");
2622 if (tape
->merge_stage_size
> tape
->stage_size
) {
2623 printk(KERN_ERR
"ide-tape: bug: merge_buffer too big\n");
2624 tape
->merge_stage_size
= tape
->stage_size
;
2626 if (tape
->merge_stage_size
) {
2627 blocks
= tape
->merge_stage_size
/ tape
->tape_block_size
;
2628 if (tape
->merge_stage_size
% tape
->tape_block_size
) {
2632 i
= tape
->tape_block_size
- tape
->merge_stage_size
% tape
->tape_block_size
;
2633 bh
= tape
->bh
->b_reqnext
;
2635 atomic_set(&bh
->b_count
, 0);
2642 printk(KERN_INFO
"ide-tape: bug, bh NULL\n");
2645 min
= min(i
, (unsigned int)(bh
->b_size
- atomic_read(&bh
->b_count
)));
2646 memset(bh
->b_data
+ atomic_read(&bh
->b_count
), 0, min
);
2647 atomic_add(min
, &bh
->b_count
);
2652 (void) idetape_add_chrdev_write_request(drive
, blocks
);
2653 tape
->merge_stage_size
= 0;
2655 idetape_wait_for_pipeline(drive
);
2656 if (tape
->merge_stage
!= NULL
) {
2657 __idetape_kfree_stage(tape
->merge_stage
);
2658 tape
->merge_stage
= NULL
;
2660 clear_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
);
2661 tape
->chrdev_direction
= idetape_direction_none
;
2664 * On the next backup, perform the feedback loop again.
2665 * (I don't want to keep sense information between backups,
2666 * as some systems are constantly on, and the system load
2667 * can be totally different on the next backup).
2669 tape
->max_stages
= tape
->min_pipeline
;
2670 if (tape
->first_stage
!= NULL
||
2671 tape
->next_stage
!= NULL
||
2672 tape
->last_stage
!= NULL
||
2673 tape
->nr_stages
!= 0) {
2674 printk(KERN_ERR
"ide-tape: ide-tape pipeline bug, "
2675 "first_stage %p, next_stage %p, "
2676 "last_stage %p, nr_stages %d\n",
2677 tape
->first_stage
, tape
->next_stage
,
2678 tape
->last_stage
, tape
->nr_stages
);
2682 static void idetape_restart_speed_control (ide_drive_t
*drive
)
2684 idetape_tape_t
*tape
= drive
->driver_data
;
2686 tape
->restart_speed_control_req
= 0;
2687 tape
->pipeline_head
= 0;
2688 tape
->controlled_last_pipeline_head
= tape
->uncontrolled_last_pipeline_head
= 0;
2689 tape
->controlled_previous_pipeline_head
= tape
->uncontrolled_previous_pipeline_head
= 0;
2690 tape
->pipeline_head_speed
= tape
->controlled_pipeline_head_speed
= 5000;
2691 tape
->uncontrolled_pipeline_head_speed
= 0;
2692 tape
->controlled_pipeline_head_time
= tape
->uncontrolled_pipeline_head_time
= jiffies
;
2693 tape
->controlled_previous_head_time
= tape
->uncontrolled_previous_head_time
= jiffies
;
2696 static int idetape_initiate_read (ide_drive_t
*drive
, int max_stages
)
2698 idetape_tape_t
*tape
= drive
->driver_data
;
2699 idetape_stage_t
*new_stage
;
2702 u16 blocks
= *(u16
*)&tape
->caps
[12];
2704 /* Initialize read operation */
2705 if (tape
->chrdev_direction
!= idetape_direction_read
) {
2706 if (tape
->chrdev_direction
== idetape_direction_write
) {
2707 idetape_empty_write_pipeline(drive
);
2708 idetape_flush_tape_buffers(drive
);
2710 if (tape
->merge_stage
|| tape
->merge_stage_size
) {
2711 printk (KERN_ERR
"ide-tape: merge_stage_size should be 0 now\n");
2712 tape
->merge_stage_size
= 0;
2714 if ((tape
->merge_stage
= __idetape_kmalloc_stage(tape
, 0, 0)) == NULL
)
2716 tape
->chrdev_direction
= idetape_direction_read
;
2719 * Issue a read 0 command to ensure that DSC handshake
2720 * is switched from completion mode to buffer available
2722 * No point in issuing this if DSC overlap isn't supported,
2723 * some drives (Seagate STT3401A) will return an error.
2725 if (drive
->dsc_overlap
) {
2726 bytes_read
= idetape_queue_rw_tail(drive
, REQ_IDETAPE_READ
, 0, tape
->merge_stage
->bh
);
2727 if (bytes_read
< 0) {
2728 __idetape_kfree_stage(tape
->merge_stage
);
2729 tape
->merge_stage
= NULL
;
2730 tape
->chrdev_direction
= idetape_direction_none
;
2735 if (tape
->restart_speed_control_req
)
2736 idetape_restart_speed_control(drive
);
2737 idetape_init_rq(&rq
, REQ_IDETAPE_READ
);
2738 rq
.sector
= tape
->first_frame_position
;
2739 rq
.nr_sectors
= rq
.current_nr_sectors
= blocks
;
2740 if (!test_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
) &&
2741 tape
->nr_stages
< max_stages
) {
2742 new_stage
= idetape_kmalloc_stage(tape
);
2743 while (new_stage
!= NULL
) {
2745 idetape_add_stage_tail(drive
, new_stage
);
2746 if (tape
->nr_stages
>= max_stages
)
2748 new_stage
= idetape_kmalloc_stage(tape
);
2751 if (!idetape_pipeline_active(tape
)) {
2752 if (tape
->nr_pending_stages
>= 3 * max_stages
/ 4) {
2753 tape
->measure_insert_time
= 1;
2754 tape
->insert_time
= jiffies
;
2755 tape
->insert_size
= 0;
2756 tape
->insert_speed
= 0;
2757 idetape_insert_pipeline_into_queue(drive
);
2764 * idetape_add_chrdev_read_request is called from idetape_chrdev_read
2765 * to service a character device read request and add read-ahead
2766 * requests to our pipeline.
2768 static int idetape_add_chrdev_read_request (ide_drive_t
*drive
,int blocks
)
2770 idetape_tape_t
*tape
= drive
->driver_data
;
2771 unsigned long flags
;
2772 struct request
*rq_ptr
;
2775 #if IDETAPE_DEBUG_LOG
2776 if (tape
->debug_level
>= 4)
2777 printk(KERN_INFO
"ide-tape: Reached idetape_add_chrdev_read_request, %d blocks\n", blocks
);
2778 #endif /* IDETAPE_DEBUG_LOG */
2781 * If we are at a filemark, return a read length of 0
2783 if (test_bit(IDETAPE_FILEMARK
, &tape
->flags
))
2787 * Wait for the next block to be available at the head
2790 idetape_initiate_read(drive
, tape
->max_stages
);
2791 if (tape
->first_stage
== NULL
) {
2792 if (test_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
))
2794 return idetape_queue_rw_tail(drive
, REQ_IDETAPE_READ
, blocks
, tape
->merge_stage
->bh
);
2796 idetape_wait_first_stage(drive
);
2797 rq_ptr
= &tape
->first_stage
->rq
;
2798 bytes_read
= tape
->tape_block_size
* (rq_ptr
->nr_sectors
- rq_ptr
->current_nr_sectors
);
2799 rq_ptr
->nr_sectors
= rq_ptr
->current_nr_sectors
= 0;
2802 if (rq_ptr
->errors
== IDETAPE_ERROR_EOD
)
2805 idetape_switch_buffers(tape
, tape
->first_stage
);
2806 if (rq_ptr
->errors
== IDETAPE_ERROR_FILEMARK
)
2807 set_bit(IDETAPE_FILEMARK
, &tape
->flags
);
2808 spin_lock_irqsave(&tape
->spinlock
, flags
);
2809 idetape_remove_stage_head(drive
);
2810 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2811 tape
->pipeline_head
++;
2812 calculate_speeds(drive
);
2814 if (bytes_read
> blocks
* tape
->tape_block_size
) {
2815 printk(KERN_ERR
"ide-tape: bug: trying to return more bytes than requested\n");
2816 bytes_read
= blocks
* tape
->tape_block_size
;
2818 return (bytes_read
);
2821 static void idetape_pad_zeros (ide_drive_t
*drive
, int bcount
)
2823 idetape_tape_t
*tape
= drive
->driver_data
;
2824 struct idetape_bh
*bh
;
2830 bh
= tape
->merge_stage
->bh
;
2831 count
= min(tape
->stage_size
, bcount
);
2833 blocks
= count
/ tape
->tape_block_size
;
2835 atomic_set(&bh
->b_count
, min(count
, (unsigned int)bh
->b_size
));
2836 memset(bh
->b_data
, 0, atomic_read(&bh
->b_count
));
2837 count
-= atomic_read(&bh
->b_count
);
2840 idetape_queue_rw_tail(drive
, REQ_IDETAPE_WRITE
, blocks
, tape
->merge_stage
->bh
);
2844 static int idetape_pipeline_size (ide_drive_t
*drive
)
2846 idetape_tape_t
*tape
= drive
->driver_data
;
2847 idetape_stage_t
*stage
;
2851 idetape_wait_for_pipeline(drive
);
2852 stage
= tape
->first_stage
;
2853 while (stage
!= NULL
) {
2855 size
+= tape
->tape_block_size
* (rq
->nr_sectors
-rq
->current_nr_sectors
);
2856 if (rq
->errors
== IDETAPE_ERROR_FILEMARK
)
2857 size
+= tape
->tape_block_size
;
2858 stage
= stage
->next
;
2860 size
+= tape
->merge_stage_size
;
2865 * Rewinds the tape to the Beginning Of the current Partition (BOP).
2867 * We currently support only one partition.
2869 static int idetape_rewind_tape (ide_drive_t
*drive
)
2873 #if IDETAPE_DEBUG_LOG
2874 idetape_tape_t
*tape
= drive
->driver_data
;
2875 if (tape
->debug_level
>= 2)
2876 printk(KERN_INFO
"ide-tape: Reached idetape_rewind_tape\n");
2877 #endif /* IDETAPE_DEBUG_LOG */
2879 idetape_create_rewind_cmd(drive
, &pc
);
2880 retval
= idetape_queue_pc_tail(drive
, &pc
);
2884 idetape_create_read_position_cmd(&pc
);
2885 retval
= idetape_queue_pc_tail(drive
, &pc
);
2892 * Our special ide-tape ioctl's.
2894 * Currently there aren't any ioctl's.
2895 * mtio.h compatible commands should be issued to the character device
2898 static int idetape_blkdev_ioctl(ide_drive_t
*drive
, unsigned int cmd
, unsigned long arg
)
2900 idetape_tape_t
*tape
= drive
->driver_data
;
2901 idetape_config_t config
;
2902 void __user
*argp
= (void __user
*)arg
;
2904 #if IDETAPE_DEBUG_LOG
2905 if (tape
->debug_level
>= 4)
2906 printk(KERN_INFO
"ide-tape: Reached idetape_blkdev_ioctl\n");
2907 #endif /* IDETAPE_DEBUG_LOG */
2910 if (copy_from_user(&config
, argp
, sizeof (idetape_config_t
)))
2912 tape
->best_dsc_rw_frequency
= config
.dsc_rw_frequency
;
2913 tape
->max_stages
= config
.nr_stages
;
2916 config
.dsc_rw_frequency
= (int) tape
->best_dsc_rw_frequency
;
2917 config
.nr_stages
= tape
->max_stages
;
2918 if (copy_to_user(argp
, &config
, sizeof (idetape_config_t
)))
2928 * idetape_space_over_filemarks is now a bit more complicated than just
2929 * passing the command to the tape since we may have crossed some
2930 * filemarks during our pipelined read-ahead mode.
2932 * As a minor side effect, the pipeline enables us to support MTFSFM when
2933 * the filemark is in our internal pipeline even if the tape doesn't
2934 * support spacing over filemarks in the reverse direction.
2936 static int idetape_space_over_filemarks (ide_drive_t
*drive
,short mt_op
,int mt_count
)
2938 idetape_tape_t
*tape
= drive
->driver_data
;
2940 unsigned long flags
;
2942 int sprev
= !!(tape
->caps
[4] & 0x20);
2946 if (MTBSF
== mt_op
|| MTBSFM
== mt_op
) {
2949 mt_count
= - mt_count
;
2952 if (tape
->chrdev_direction
== idetape_direction_read
) {
2954 * We have a read-ahead buffer. Scan it for crossed
2957 tape
->merge_stage_size
= 0;
2958 if (test_and_clear_bit(IDETAPE_FILEMARK
, &tape
->flags
))
2960 while (tape
->first_stage
!= NULL
) {
2961 if (count
== mt_count
) {
2962 if (mt_op
== MTFSFM
)
2963 set_bit(IDETAPE_FILEMARK
, &tape
->flags
);
2966 spin_lock_irqsave(&tape
->spinlock
, flags
);
2967 if (tape
->first_stage
== tape
->active_stage
) {
2969 * We have reached the active stage in the read pipeline.
2970 * There is no point in allowing the drive to continue
2971 * reading any farther, so we stop the pipeline.
2973 * This section should be moved to a separate subroutine,
2974 * because a similar function is performed in
2975 * __idetape_discard_read_pipeline(), for example.
2977 tape
->next_stage
= NULL
;
2978 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2979 idetape_wait_first_stage(drive
);
2980 tape
->next_stage
= tape
->first_stage
->next
;
2982 spin_unlock_irqrestore(&tape
->spinlock
, flags
);
2983 if (tape
->first_stage
->rq
.errors
== IDETAPE_ERROR_FILEMARK
)
2985 idetape_remove_stage_head(drive
);
2987 idetape_discard_read_pipeline(drive
, 0);
2991 * The filemark was not found in our internal pipeline.
2992 * Now we can issue the space command.
2997 idetape_create_space_cmd(&pc
,mt_count
-count
,IDETAPE_SPACE_OVER_FILEMARK
);
2998 return (idetape_queue_pc_tail(drive
, &pc
));
3003 retval
= idetape_space_over_filemarks(drive
, MTFSF
, mt_count
-count
);
3004 if (retval
) return (retval
);
3005 count
= (MTBSFM
== mt_op
? 1 : -1);
3006 return (idetape_space_over_filemarks(drive
, MTFSF
, count
));
3008 printk(KERN_ERR
"ide-tape: MTIO operation %d not supported\n",mt_op
);
3015 * Our character device read / write functions.
3017 * The tape is optimized to maximize throughput when it is transferring
3018 * an integral number of the "continuous transfer limit", which is
3019 * a parameter of the specific tape (26 KB on my particular tape).
3020 * (32 kB for Onstream)
3022 * As of version 1.3 of the driver, the character device provides an
3023 * abstract continuous view of the media - any mix of block sizes (even 1
3024 * byte) on the same backup/restore procedure is supported. The driver
3025 * will internally convert the requests to the recommended transfer unit,
3026 * so that an unmatch between the user's block size to the recommended
3027 * size will only result in a (slightly) increased driver overhead, but
3028 * will no longer hit performance.
3029 * This is not applicable to Onstream.
3031 static ssize_t
idetape_chrdev_read (struct file
*file
, char __user
*buf
,
3032 size_t count
, loff_t
*ppos
)
3034 struct ide_tape_obj
*tape
= ide_tape_f(file
);
3035 ide_drive_t
*drive
= tape
->drive
;
3036 ssize_t bytes_read
,temp
, actually_read
= 0, rc
;
3038 u16 ctl
= *(u16
*)&tape
->caps
[12];
3040 #if IDETAPE_DEBUG_LOG
3041 if (tape
->debug_level
>= 3)
3042 printk(KERN_INFO
"ide-tape: Reached idetape_chrdev_read, count %Zd\n", count
);
3043 #endif /* IDETAPE_DEBUG_LOG */
3045 if (tape
->chrdev_direction
!= idetape_direction_read
) {
3046 if (test_bit(IDETAPE_DETECT_BS
, &tape
->flags
))
3047 if (count
> tape
->tape_block_size
&&
3048 (count
% tape
->tape_block_size
) == 0)
3049 tape
->user_bs_factor
= count
/ tape
->tape_block_size
;
3051 if ((rc
= idetape_initiate_read(drive
, tape
->max_stages
)) < 0)
3055 if (tape
->merge_stage_size
) {
3056 actually_read
= min((unsigned int)(tape
->merge_stage_size
), (unsigned int)count
);
3057 if (idetape_copy_stage_to_user(tape
, buf
, tape
->merge_stage
, actually_read
))
3059 buf
+= actually_read
;
3060 tape
->merge_stage_size
-= actually_read
;
3061 count
-= actually_read
;
3063 while (count
>= tape
->stage_size
) {
3064 bytes_read
= idetape_add_chrdev_read_request(drive
, ctl
);
3065 if (bytes_read
<= 0)
3067 if (idetape_copy_stage_to_user(tape
, buf
, tape
->merge_stage
, bytes_read
))
3070 count
-= bytes_read
;
3071 actually_read
+= bytes_read
;
3074 bytes_read
= idetape_add_chrdev_read_request(drive
, ctl
);
3075 if (bytes_read
<= 0)
3077 temp
= min((unsigned long)count
, (unsigned long)bytes_read
);
3078 if (idetape_copy_stage_to_user(tape
, buf
, tape
->merge_stage
, temp
))
3080 actually_read
+= temp
;
3081 tape
->merge_stage_size
= bytes_read
-temp
;
3084 if (!actually_read
&& test_bit(IDETAPE_FILEMARK
, &tape
->flags
)) {
3085 #if IDETAPE_DEBUG_LOG
3086 if (tape
->debug_level
>= 2)
3087 printk(KERN_INFO
"ide-tape: %s: spacing over filemark\n", tape
->name
);
3089 idetape_space_over_filemarks(drive
, MTFSF
, 1);
3093 return (ret
) ? ret
: actually_read
;
3096 static ssize_t
idetape_chrdev_write (struct file
*file
, const char __user
*buf
,
3097 size_t count
, loff_t
*ppos
)
3099 struct ide_tape_obj
*tape
= ide_tape_f(file
);
3100 ide_drive_t
*drive
= tape
->drive
;
3101 ssize_t actually_written
= 0;
3103 u16 ctl
= *(u16
*)&tape
->caps
[12];
3105 /* The drive is write protected. */
3106 if (tape
->write_prot
)
3109 #if IDETAPE_DEBUG_LOG
3110 if (tape
->debug_level
>= 3)
3111 printk(KERN_INFO
"ide-tape: Reached idetape_chrdev_write, "
3112 "count %Zd\n", count
);
3113 #endif /* IDETAPE_DEBUG_LOG */
3115 /* Initialize write operation */
3116 if (tape
->chrdev_direction
!= idetape_direction_write
) {
3117 if (tape
->chrdev_direction
== idetape_direction_read
)
3118 idetape_discard_read_pipeline(drive
, 1);
3119 if (tape
->merge_stage
|| tape
->merge_stage_size
) {
3120 printk(KERN_ERR
"ide-tape: merge_stage_size "
3121 "should be 0 now\n");
3122 tape
->merge_stage_size
= 0;
3124 if ((tape
->merge_stage
= __idetape_kmalloc_stage(tape
, 0, 0)) == NULL
)
3126 tape
->chrdev_direction
= idetape_direction_write
;
3127 idetape_init_merge_stage(tape
);
3130 * Issue a write 0 command to ensure that DSC handshake
3131 * is switched from completion mode to buffer available
3133 * No point in issuing this if DSC overlap isn't supported,
3134 * some drives (Seagate STT3401A) will return an error.
3136 if (drive
->dsc_overlap
) {
3137 ssize_t retval
= idetape_queue_rw_tail(drive
, REQ_IDETAPE_WRITE
, 0, tape
->merge_stage
->bh
);
3139 __idetape_kfree_stage(tape
->merge_stage
);
3140 tape
->merge_stage
= NULL
;
3141 tape
->chrdev_direction
= idetape_direction_none
;
3148 if (tape
->restart_speed_control_req
)
3149 idetape_restart_speed_control(drive
);
3150 if (tape
->merge_stage_size
) {
3151 if (tape
->merge_stage_size
>= tape
->stage_size
) {
3152 printk(KERN_ERR
"ide-tape: bug: merge buffer too big\n");
3153 tape
->merge_stage_size
= 0;
3155 actually_written
= min((unsigned int)(tape
->stage_size
- tape
->merge_stage_size
), (unsigned int)count
);
3156 if (idetape_copy_stage_from_user(tape
, tape
->merge_stage
, buf
, actually_written
))
3158 buf
+= actually_written
;
3159 tape
->merge_stage_size
+= actually_written
;
3160 count
-= actually_written
;
3162 if (tape
->merge_stage_size
== tape
->stage_size
) {
3164 tape
->merge_stage_size
= 0;
3165 retval
= idetape_add_chrdev_write_request(drive
, ctl
);
3170 while (count
>= tape
->stage_size
) {
3172 if (idetape_copy_stage_from_user(tape
, tape
->merge_stage
, buf
, tape
->stage_size
))
3174 buf
+= tape
->stage_size
;
3175 count
-= tape
->stage_size
;
3176 retval
= idetape_add_chrdev_write_request(drive
, ctl
);
3177 actually_written
+= tape
->stage_size
;
3182 actually_written
+= count
;
3183 if (idetape_copy_stage_from_user(tape
, tape
->merge_stage
, buf
, count
))
3185 tape
->merge_stage_size
+= count
;
3187 return (ret
) ? ret
: actually_written
;
3190 static int idetape_write_filemark (ide_drive_t
*drive
)
3194 /* Write a filemark */
3195 idetape_create_write_filemark_cmd(drive
, &pc
, 1);
3196 if (idetape_queue_pc_tail(drive
, &pc
)) {
3197 printk(KERN_ERR
"ide-tape: Couldn't write a filemark\n");
3204 * idetape_mtioctop is called from idetape_chrdev_ioctl when
3205 * the general mtio MTIOCTOP ioctl is requested.
3207 * We currently support the following mtio.h operations:
3209 * MTFSF - Space over mt_count filemarks in the positive direction.
3210 * The tape is positioned after the last spaced filemark.
3212 * MTFSFM - Same as MTFSF, but the tape is positioned before the
3215 * MTBSF - Steps background over mt_count filemarks, tape is
3216 * positioned before the last filemark.
3218 * MTBSFM - Like MTBSF, only tape is positioned after the last filemark.
3222 * MTBSF and MTBSFM are not supported when the tape doesn't
3223 * support spacing over filemarks in the reverse direction.
3224 * In this case, MTFSFM is also usually not supported (it is
3225 * supported in the rare case in which we crossed the filemark
3226 * during our read-ahead pipelined operation mode).
3228 * MTWEOF - Writes mt_count filemarks. Tape is positioned after
3229 * the last written filemark.
3231 * MTREW - Rewinds tape.
3233 * MTLOAD - Loads the tape.
3235 * MTOFFL - Puts the tape drive "Offline": Rewinds the tape and
3236 * MTUNLOAD prevents further access until the media is replaced.
3238 * MTNOP - Flushes tape buffers.
3240 * MTRETEN - Retension media. This typically consists of one end
3241 * to end pass on the media.
3243 * MTEOM - Moves to the end of recorded data.
3245 * MTERASE - Erases tape.
3247 * MTSETBLK - Sets the user block size to mt_count bytes. If
3248 * mt_count is 0, we will attempt to autodetect
3251 * MTSEEK - Positions the tape in a specific block number, where
3252 * each block is assumed to contain which user_block_size
3255 * MTSETPART - Switches to another tape partition.
3257 * MTLOCK - Locks the tape door.
3259 * MTUNLOCK - Unlocks the tape door.
3261 * The following commands are currently not supported:
3263 * MTFSS, MTBSS, MTWSM, MTSETDENSITY,
3264 * MTSETDRVBUFFER, MT_ST_BOOLEANS, MT_ST_WRITE_THRESHOLD.
3266 static int idetape_mtioctop (ide_drive_t
*drive
,short mt_op
,int mt_count
)
3268 idetape_tape_t
*tape
= drive
->driver_data
;
3272 #if IDETAPE_DEBUG_LOG
3273 if (tape
->debug_level
>= 1)
3274 printk(KERN_INFO
"ide-tape: Handling MTIOCTOP ioctl: "
3275 "mt_op=%d, mt_count=%d\n", mt_op
, mt_count
);
3276 #endif /* IDETAPE_DEBUG_LOG */
3278 * Commands which need our pipelined read-ahead stages.
3287 return (idetape_space_over_filemarks(drive
,mt_op
,mt_count
));
3293 if (tape
->write_prot
)
3295 idetape_discard_read_pipeline(drive
, 1);
3296 for (i
= 0; i
< mt_count
; i
++) {
3297 retval
= idetape_write_filemark(drive
);
3303 idetape_discard_read_pipeline(drive
, 0);
3304 if (idetape_rewind_tape(drive
))
3308 idetape_discard_read_pipeline(drive
, 0);
3309 idetape_create_load_unload_cmd(drive
, &pc
, IDETAPE_LU_LOAD_MASK
);
3310 return (idetape_queue_pc_tail(drive
, &pc
));
3314 * If door is locked, attempt to unlock before
3315 * attempting to eject.
3317 if (tape
->door_locked
) {
3318 if (idetape_create_prevent_cmd(drive
, &pc
, 0))
3319 if (!idetape_queue_pc_tail(drive
, &pc
))
3320 tape
->door_locked
= DOOR_UNLOCKED
;
3322 idetape_discard_read_pipeline(drive
, 0);
3323 idetape_create_load_unload_cmd(drive
, &pc
,!IDETAPE_LU_LOAD_MASK
);
3324 retval
= idetape_queue_pc_tail(drive
, &pc
);
3326 clear_bit(IDETAPE_MEDIUM_PRESENT
, &tape
->flags
);
3329 idetape_discard_read_pipeline(drive
, 0);
3330 return (idetape_flush_tape_buffers(drive
));
3332 idetape_discard_read_pipeline(drive
, 0);
3333 idetape_create_load_unload_cmd(drive
, &pc
,IDETAPE_LU_RETENSION_MASK
| IDETAPE_LU_LOAD_MASK
);
3334 return (idetape_queue_pc_tail(drive
, &pc
));
3336 idetape_create_space_cmd(&pc
, 0, IDETAPE_SPACE_TO_EOD
);
3337 return (idetape_queue_pc_tail(drive
, &pc
));
3339 (void) idetape_rewind_tape(drive
);
3340 idetape_create_erase_cmd(&pc
);
3341 return (idetape_queue_pc_tail(drive
, &pc
));
3344 if (mt_count
< tape
->tape_block_size
|| mt_count
% tape
->tape_block_size
)
3346 tape
->user_bs_factor
= mt_count
/ tape
->tape_block_size
;
3347 clear_bit(IDETAPE_DETECT_BS
, &tape
->flags
);
3349 set_bit(IDETAPE_DETECT_BS
, &tape
->flags
);
3352 idetape_discard_read_pipeline(drive
, 0);
3353 return idetape_position_tape(drive
, mt_count
* tape
->user_bs_factor
, tape
->partition
, 0);
3355 idetape_discard_read_pipeline(drive
, 0);
3356 return (idetape_position_tape(drive
, 0, mt_count
, 0));
3360 if (!idetape_create_prevent_cmd(drive
, &pc
, 1))
3362 retval
= idetape_queue_pc_tail(drive
, &pc
);
3363 if (retval
) return retval
;
3364 tape
->door_locked
= DOOR_EXPLICITLY_LOCKED
;
3367 if (!idetape_create_prevent_cmd(drive
, &pc
, 0))
3369 retval
= idetape_queue_pc_tail(drive
, &pc
);
3370 if (retval
) return retval
;
3371 tape
->door_locked
= DOOR_UNLOCKED
;
3374 printk(KERN_ERR
"ide-tape: MTIO operation %d not "
3375 "supported\n", mt_op
);
3381 * Our character device ioctls.
3383 * General mtio.h magnetic io commands are supported here, and not in
3384 * the corresponding block interface.
3386 * The following ioctls are supported:
3388 * MTIOCTOP - Refer to idetape_mtioctop for detailed description.
3390 * MTIOCGET - The mt_dsreg field in the returned mtget structure
3391 * will be set to (user block size in bytes <<
3392 * MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK.
3394 * The mt_blkno is set to the current user block number.
3395 * The other mtget fields are not supported.
3397 * MTIOCPOS - The current tape "block position" is returned. We
3398 * assume that each block contains user_block_size
3401 * Our own ide-tape ioctls are supported on both interfaces.
3403 static int idetape_chrdev_ioctl (struct inode
*inode
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
3405 struct ide_tape_obj
*tape
= ide_tape_f(file
);
3406 ide_drive_t
*drive
= tape
->drive
;
3410 int block_offset
= 0, position
= tape
->first_frame_position
;
3411 void __user
*argp
= (void __user
*)arg
;
3413 #if IDETAPE_DEBUG_LOG
3414 if (tape
->debug_level
>= 3)
3415 printk(KERN_INFO
"ide-tape: Reached idetape_chrdev_ioctl, "
3417 #endif /* IDETAPE_DEBUG_LOG */
3419 tape
->restart_speed_control_req
= 1;
3420 if (tape
->chrdev_direction
== idetape_direction_write
) {
3421 idetape_empty_write_pipeline(drive
);
3422 idetape_flush_tape_buffers(drive
);
3424 if (cmd
== MTIOCGET
|| cmd
== MTIOCPOS
) {
3425 block_offset
= idetape_pipeline_size(drive
) / (tape
->tape_block_size
* tape
->user_bs_factor
);
3426 if ((position
= idetape_read_position(drive
)) < 0)
3431 if (copy_from_user(&mtop
, argp
, sizeof (struct mtop
)))
3433 return (idetape_mtioctop(drive
,mtop
.mt_op
,mtop
.mt_count
));
3435 memset(&mtget
, 0, sizeof (struct mtget
));
3436 mtget
.mt_type
= MT_ISSCSI2
;
3437 mtget
.mt_blkno
= position
/ tape
->user_bs_factor
- block_offset
;
3438 mtget
.mt_dsreg
= ((tape
->tape_block_size
* tape
->user_bs_factor
) << MT_ST_BLKSIZE_SHIFT
) & MT_ST_BLKSIZE_MASK
;
3439 if (tape
->drv_write_prot
) {
3440 mtget
.mt_gstat
|= GMT_WR_PROT(0xffffffff);
3442 if (copy_to_user(argp
, &mtget
, sizeof(struct mtget
)))
3446 mtpos
.mt_blkno
= position
/ tape
->user_bs_factor
- block_offset
;
3447 if (copy_to_user(argp
, &mtpos
, sizeof(struct mtpos
)))
3451 if (tape
->chrdev_direction
== idetape_direction_read
)
3452 idetape_discard_read_pipeline(drive
, 1);
3453 return idetape_blkdev_ioctl(drive
, cmd
, arg
);
3458 * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
3459 * block size with the reported value.
3461 static void ide_tape_get_bsize_from_bdesc(ide_drive_t
*drive
)
3463 idetape_tape_t
*tape
= drive
->driver_data
;
3466 idetape_create_mode_sense_cmd(&pc
, IDETAPE_BLOCK_DESCRIPTOR
);
3467 if (idetape_queue_pc_tail(drive
, &pc
)) {
3468 printk(KERN_ERR
"ide-tape: Can't get block descriptor\n");
3469 if (tape
->tape_block_size
== 0) {
3470 printk(KERN_WARNING
"ide-tape: Cannot deal with zero "
3471 "block size, assuming 32k\n");
3472 tape
->tape_block_size
= 32768;
3476 tape
->tape_block_size
= (pc
.buffer
[4 + 5] << 16) +
3477 (pc
.buffer
[4 + 6] << 8) +
3479 tape
->drv_write_prot
= (pc
.buffer
[2] & 0x80) >> 7;
3483 * Our character device open function.
3485 static int idetape_chrdev_open (struct inode
*inode
, struct file
*filp
)
3487 unsigned int minor
= iminor(inode
), i
= minor
& ~0xc0;
3489 idetape_tape_t
*tape
;
3494 * We really want to do nonseekable_open(inode, filp); here, but some
3495 * versions of tar incorrectly call lseek on tapes and bail out if that
3496 * fails. So we disallow pread() and pwrite(), but permit lseeks.
3498 filp
->f_mode
&= ~(FMODE_PREAD
| FMODE_PWRITE
);
3500 #if IDETAPE_DEBUG_LOG
3501 printk(KERN_INFO
"ide-tape: Reached idetape_chrdev_open\n");
3502 #endif /* IDETAPE_DEBUG_LOG */
3504 if (i
>= MAX_HWIFS
* MAX_DRIVES
)
3507 if (!(tape
= ide_tape_chrdev_get(i
)))
3510 drive
= tape
->drive
;
3512 filp
->private_data
= tape
;
3514 if (test_and_set_bit(IDETAPE_BUSY
, &tape
->flags
)) {
3519 retval
= idetape_wait_ready(drive
, 60 * HZ
);
3521 clear_bit(IDETAPE_BUSY
, &tape
->flags
);
3522 printk(KERN_ERR
"ide-tape: %s: drive not ready\n", tape
->name
);
3526 idetape_read_position(drive
);
3527 if (!test_bit(IDETAPE_ADDRESS_VALID
, &tape
->flags
))
3528 (void)idetape_rewind_tape(drive
);
3530 if (tape
->chrdev_direction
!= idetape_direction_read
)
3531 clear_bit(IDETAPE_PIPELINE_ERROR
, &tape
->flags
);
3533 /* Read block size and write protect status from drive. */
3534 ide_tape_get_bsize_from_bdesc(drive
);
3536 /* Set write protect flag if device is opened as read-only. */
3537 if ((filp
->f_flags
& O_ACCMODE
) == O_RDONLY
)
3538 tape
->write_prot
= 1;
3540 tape
->write_prot
= tape
->drv_write_prot
;
3542 /* Make sure drive isn't write protected if user wants to write. */
3543 if (tape
->write_prot
) {
3544 if ((filp
->f_flags
& O_ACCMODE
) == O_WRONLY
||
3545 (filp
->f_flags
& O_ACCMODE
) == O_RDWR
) {
3546 clear_bit(IDETAPE_BUSY
, &tape
->flags
);
3553 * Lock the tape drive door so user can't eject.
3555 if (tape
->chrdev_direction
== idetape_direction_none
) {
3556 if (idetape_create_prevent_cmd(drive
, &pc
, 1)) {
3557 if (!idetape_queue_pc_tail(drive
, &pc
)) {
3558 if (tape
->door_locked
!= DOOR_EXPLICITLY_LOCKED
)
3559 tape
->door_locked
= DOOR_LOCKED
;
3563 idetape_restart_speed_control(drive
);
3564 tape
->restart_speed_control_req
= 0;
3572 static void idetape_write_release (ide_drive_t
*drive
, unsigned int minor
)
3574 idetape_tape_t
*tape
= drive
->driver_data
;
3576 idetape_empty_write_pipeline(drive
);
3577 tape
->merge_stage
= __idetape_kmalloc_stage(tape
, 1, 0);
3578 if (tape
->merge_stage
!= NULL
) {
3579 idetape_pad_zeros(drive
, tape
->tape_block_size
* (tape
->user_bs_factor
- 1));
3580 __idetape_kfree_stage(tape
->merge_stage
);
3581 tape
->merge_stage
= NULL
;
3583 idetape_write_filemark(drive
);
3584 idetape_flush_tape_buffers(drive
);
3585 idetape_flush_tape_buffers(drive
);
3589 * Our character device release function.
3591 static int idetape_chrdev_release (struct inode
*inode
, struct file
*filp
)
3593 struct ide_tape_obj
*tape
= ide_tape_f(filp
);
3594 ide_drive_t
*drive
= tape
->drive
;
3596 unsigned int minor
= iminor(inode
);
3599 tape
= drive
->driver_data
;
3600 #if IDETAPE_DEBUG_LOG
3601 if (tape
->debug_level
>= 3)
3602 printk(KERN_INFO
"ide-tape: Reached idetape_chrdev_release\n");
3603 #endif /* IDETAPE_DEBUG_LOG */
3605 if (tape
->chrdev_direction
== idetape_direction_write
)
3606 idetape_write_release(drive
, minor
);
3607 if (tape
->chrdev_direction
== idetape_direction_read
) {
3609 idetape_discard_read_pipeline(drive
, 1);
3611 idetape_wait_for_pipeline(drive
);
3613 if (tape
->cache_stage
!= NULL
) {
3614 __idetape_kfree_stage(tape
->cache_stage
);
3615 tape
->cache_stage
= NULL
;
3617 if (minor
< 128 && test_bit(IDETAPE_MEDIUM_PRESENT
, &tape
->flags
))
3618 (void) idetape_rewind_tape(drive
);
3619 if (tape
->chrdev_direction
== idetape_direction_none
) {
3620 if (tape
->door_locked
== DOOR_LOCKED
) {
3621 if (idetape_create_prevent_cmd(drive
, &pc
, 0)) {
3622 if (!idetape_queue_pc_tail(drive
, &pc
))
3623 tape
->door_locked
= DOOR_UNLOCKED
;
3627 clear_bit(IDETAPE_BUSY
, &tape
->flags
);
3634 * idetape_identify_device is called to check the contents of the
3635 * ATAPI IDENTIFY command results. We return:
3637 * 1 If the tape can be supported by us, based on the information
3640 * 0 If this tape driver is not currently supported by us.
3642 static int idetape_identify_device (ide_drive_t
*drive
)
3644 struct idetape_id_gcw gcw
;
3645 struct hd_driveid
*id
= drive
->id
;
3647 if (drive
->id_read
== 0)
3650 *((unsigned short *) &gcw
) = id
->config
;
3652 /* Check that we can support this device */
3654 if (gcw
.protocol
!= 2)
3655 printk(KERN_ERR
"ide-tape: Protocol (0x%02x) is not ATAPI\n",
3657 else if (gcw
.device_type
!= 1)
3658 printk(KERN_ERR
"ide-tape: Device type (0x%02x) is not set "
3659 "to tape\n", gcw
.device_type
);
3660 else if (!gcw
.removable
)
3661 printk(KERN_ERR
"ide-tape: The removable flag is not set\n");
3662 else if (gcw
.packet_size
!= 0) {
3663 printk(KERN_ERR
"ide-tape: Packet size (0x%02x) is not 12 "
3664 "bytes long\n", gcw
.packet_size
);
3670 static void idetape_get_inquiry_results(ide_drive_t
*drive
)
3673 idetape_tape_t
*tape
= drive
->driver_data
;
3676 idetape_create_inquiry_cmd(&pc
);
3677 if (idetape_queue_pc_tail(drive
, &pc
)) {
3678 printk(KERN_ERR
"ide-tape: %s: can't get INQUIRY results\n",
3682 memcpy(tape
->vendor_id
, &pc
.buffer
[8], 8);
3683 memcpy(tape
->product_id
, &pc
.buffer
[16], 16);
3684 memcpy(tape
->firmware_revision
, &pc
.buffer
[32], 4);
3686 ide_fixstring(tape
->vendor_id
, 10, 0);
3687 ide_fixstring(tape
->product_id
, 18, 0);
3688 ide_fixstring(tape
->firmware_revision
, 6, 0);
3689 r
= tape
->firmware_revision
;
3690 if (*(r
+ 1) == '.')
3691 tape
->firmware_revision_num
= (*r
- '0') * 100 +
3692 (*(r
+ 2) - '0') * 10 + *(r
+ 3) - '0';
3693 printk(KERN_INFO
"ide-tape: %s <-> %s: %s %s rev %s\n",
3694 drive
->name
, tape
->name
, tape
->vendor_id
,
3695 tape
->product_id
, tape
->firmware_revision
);
3699 * Ask the tape about its various parameters. In particular, we will adjust our
3700 * data transfer buffer size to the recommended value as returned by the tape.
3702 static void idetape_get_mode_sense_results (ide_drive_t
*drive
)
3704 idetape_tape_t
*tape
= drive
->driver_data
;
3707 u8 speed
, max_speed
;
3709 idetape_create_mode_sense_cmd(&pc
, IDETAPE_CAPABILITIES_PAGE
);
3710 if (idetape_queue_pc_tail(drive
, &pc
)) {
3711 printk(KERN_ERR
"ide-tape: Can't get tape parameters - assuming"
3712 " some default values\n");
3713 tape
->tape_block_size
= 512;
3714 put_unaligned(52, (u16
*)&tape
->caps
[12]);
3715 put_unaligned(540, (u16
*)&tape
->caps
[14]);
3716 put_unaligned(6*52, (u16
*)&tape
->caps
[16]);
3719 caps
= pc
.buffer
+ 4 + pc
.buffer
[3];
3721 /* convert to host order and save for later use */
3722 speed
= be16_to_cpu(*(u16
*)&caps
[14]);
3723 max_speed
= be16_to_cpu(*(u16
*)&caps
[8]);
3725 put_unaligned(max_speed
, (u16
*)&caps
[8]);
3726 put_unaligned(be16_to_cpu(*(u16
*)&caps
[12]), (u16
*)&caps
[12]);
3727 put_unaligned(speed
, (u16
*)&caps
[14]);
3728 put_unaligned(be16_to_cpu(*(u16
*)&caps
[16]), (u16
*)&caps
[16]);
3731 printk(KERN_INFO
"ide-tape: %s: invalid tape speed "
3732 "(assuming 650KB/sec)\n", drive
->name
);
3733 put_unaligned(650, (u16
*)&caps
[14]);
3736 printk(KERN_INFO
"ide-tape: %s: invalid max_speed "
3737 "(assuming 650KB/sec)\n", drive
->name
);
3738 put_unaligned(650, (u16
*)&caps
[8]);
3741 memcpy(&tape
->caps
, caps
, 20);
3743 tape
->tape_block_size
= 512;
3744 else if (caps
[7] & 0x04)
3745 tape
->tape_block_size
= 1024;
3748 #ifdef CONFIG_IDE_PROC_FS
3749 static void idetape_add_settings (ide_drive_t
*drive
)
3751 idetape_tape_t
*tape
= drive
->driver_data
;
3754 * drive setting name read/write data type min max mul_factor div_factor data pointer set function
3756 ide_add_setting(drive
, "buffer", SETTING_READ
, TYPE_SHORT
, 0, 0xffff,
3757 1, 2, (u16
*)&tape
->caps
[16], NULL
);
3758 ide_add_setting(drive
, "pipeline_min", SETTING_RW
, TYPE_INT
, 1, 0xffff, tape
->stage_size
/ 1024, 1, &tape
->min_pipeline
, NULL
);
3759 ide_add_setting(drive
, "pipeline", SETTING_RW
, TYPE_INT
, 1, 0xffff, tape
->stage_size
/ 1024, 1, &tape
->max_stages
, NULL
);
3760 ide_add_setting(drive
, "pipeline_max", SETTING_RW
, TYPE_INT
, 1, 0xffff, tape
->stage_size
/ 1024, 1, &tape
->max_pipeline
, NULL
);
3761 ide_add_setting(drive
, "pipeline_used", SETTING_READ
, TYPE_INT
, 0, 0xffff, tape
->stage_size
/ 1024, 1, &tape
->nr_stages
, NULL
);
3762 ide_add_setting(drive
, "pipeline_pending", SETTING_READ
, TYPE_INT
, 0, 0xffff, tape
->stage_size
/ 1024, 1, &tape
->nr_pending_stages
, NULL
);
3763 ide_add_setting(drive
, "speed", SETTING_READ
, TYPE_SHORT
, 0, 0xffff,
3764 1, 1, (u16
*)&tape
->caps
[14], NULL
);
3765 ide_add_setting(drive
, "stage", SETTING_READ
, TYPE_INT
, 0, 0xffff, 1, 1024, &tape
->stage_size
, NULL
);
3766 ide_add_setting(drive
, "tdsc", SETTING_RW
, TYPE_INT
, IDETAPE_DSC_RW_MIN
, IDETAPE_DSC_RW_MAX
, 1000, HZ
, &tape
->best_dsc_rw_frequency
, NULL
);
3767 ide_add_setting(drive
, "dsc_overlap", SETTING_RW
, TYPE_BYTE
, 0, 1, 1, 1, &drive
->dsc_overlap
, NULL
);
3768 ide_add_setting(drive
, "pipeline_head_speed_c",SETTING_READ
, TYPE_INT
, 0, 0xffff, 1, 1, &tape
->controlled_pipeline_head_speed
, NULL
);
3769 ide_add_setting(drive
, "pipeline_head_speed_u",SETTING_READ
, TYPE_INT
, 0, 0xffff, 1, 1, &tape
->uncontrolled_pipeline_head_speed
,NULL
);
3770 ide_add_setting(drive
, "avg_speed", SETTING_READ
, TYPE_INT
, 0, 0xffff, 1, 1, &tape
->avg_speed
, NULL
);
3771 ide_add_setting(drive
, "debug_level", SETTING_RW
, TYPE_INT
, 0, 0xffff, 1, 1, &tape
->debug_level
, NULL
);
3774 static inline void idetape_add_settings(ide_drive_t
*drive
) { ; }
3778 * ide_setup is called to:
3780 * 1. Initialize our various state variables.
3781 * 2. Ask the tape for its capabilities.
3782 * 3. Allocate a buffer which will be used for data
3783 * transfer. The buffer size is chosen based on
3784 * the recommendation which we received in step (2).
3786 * Note that at this point ide.c already assigned us an irq, so that
3787 * we can queue requests here and wait for their completion.
3789 static void idetape_setup (ide_drive_t
*drive
, idetape_tape_t
*tape
, int minor
)
3791 unsigned long t1
, tmid
, tn
, t
;
3793 struct idetape_id_gcw gcw
;
3796 u16
*ctl
= (u16
*)&tape
->caps
[12];
3798 spin_lock_init(&tape
->spinlock
);
3799 drive
->dsc_overlap
= 1;
3800 if (drive
->hwif
->host_flags
& IDE_HFLAG_NO_DSC
) {
3801 printk(KERN_INFO
"ide-tape: %s: disabling DSC overlap\n",
3803 drive
->dsc_overlap
= 0;
3805 /* Seagate Travan drives do not support DSC overlap. */
3806 if (strstr(drive
->id
->model
, "Seagate STT3401"))
3807 drive
->dsc_overlap
= 0;
3808 tape
->minor
= minor
;
3809 tape
->name
[0] = 'h';
3810 tape
->name
[1] = 't';
3811 tape
->name
[2] = '0' + minor
;
3812 tape
->chrdev_direction
= idetape_direction_none
;
3813 tape
->pc
= tape
->pc_stack
;
3814 tape
->max_insert_speed
= 10000;
3815 tape
->speed_control
= 1;
3816 *((unsigned short *) &gcw
) = drive
->id
->config
;
3817 if (gcw
.drq_type
== 1)
3818 set_bit(IDETAPE_DRQ_INTERRUPT
, &tape
->flags
);
3820 tape
->min_pipeline
= tape
->max_pipeline
= tape
->max_stages
= 10;
3822 idetape_get_inquiry_results(drive
);
3823 idetape_get_mode_sense_results(drive
);
3824 ide_tape_get_bsize_from_bdesc(drive
);
3825 tape
->user_bs_factor
= 1;
3826 tape
->stage_size
= *ctl
* tape
->tape_block_size
;
3827 while (tape
->stage_size
> 0xffff) {
3828 printk(KERN_NOTICE
"ide-tape: decreasing stage size\n");
3830 tape
->stage_size
= *ctl
* tape
->tape_block_size
;
3832 stage_size
= tape
->stage_size
;
3833 tape
->pages_per_stage
= stage_size
/ PAGE_SIZE
;
3834 if (stage_size
% PAGE_SIZE
) {
3835 tape
->pages_per_stage
++;
3836 tape
->excess_bh_size
= PAGE_SIZE
- stage_size
% PAGE_SIZE
;
3839 /* Select the "best" DSC read/write polling freq and pipeline size. */
3840 speed
= max(*(u16
*)&tape
->caps
[14], *(u16
*)&tape
->caps
[8]);
3842 tape
->max_stages
= speed
* 1000 * 10 / tape
->stage_size
;
3845 * Limit memory use for pipeline to 10% of physical memory
3848 if (tape
->max_stages
* tape
->stage_size
> si
.totalram
* si
.mem_unit
/ 10)
3849 tape
->max_stages
= si
.totalram
* si
.mem_unit
/ (10 * tape
->stage_size
);
3850 tape
->max_stages
= min(tape
->max_stages
, IDETAPE_MAX_PIPELINE_STAGES
);
3851 tape
->min_pipeline
= min(tape
->max_stages
, IDETAPE_MIN_PIPELINE_STAGES
);
3852 tape
->max_pipeline
= min(tape
->max_stages
* 2, IDETAPE_MAX_PIPELINE_STAGES
);
3853 if (tape
->max_stages
== 0)
3854 tape
->max_stages
= tape
->min_pipeline
= tape
->max_pipeline
= 1;
3856 t1
= (tape
->stage_size
* HZ
) / (speed
* 1000);
3857 tmid
= (*(u16
*)&tape
->caps
[16] * 32 * HZ
) / (speed
* 125);
3858 tn
= (IDETAPE_FIFO_THRESHOLD
* tape
->stage_size
* HZ
) / (speed
* 1000);
3860 if (tape
->max_stages
)
3866 * Ensure that the number we got makes sense; limit
3867 * it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
3869 tape
->best_dsc_rw_frequency
= max_t(unsigned long, min_t(unsigned long, t
, IDETAPE_DSC_RW_MAX
), IDETAPE_DSC_RW_MIN
);
3870 printk(KERN_INFO
"ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
3871 "%dkB pipeline, %lums tDSC%s\n",
3872 drive
->name
, tape
->name
, *(u16
*)&tape
->caps
[14],
3873 (*(u16
*)&tape
->caps
[16] * 512) / tape
->stage_size
,
3874 tape
->stage_size
/ 1024,
3875 tape
->max_stages
* tape
->stage_size
/ 1024,
3876 tape
->best_dsc_rw_frequency
* 1000 / HZ
,
3877 drive
->using_dma
? ", DMA":"");
3879 idetape_add_settings(drive
);
3882 static void ide_tape_remove(ide_drive_t
*drive
)
3884 idetape_tape_t
*tape
= drive
->driver_data
;
3886 ide_proc_unregister_driver(drive
, tape
->driver
);
3888 ide_unregister_region(tape
->disk
);
3893 static void ide_tape_release(struct kref
*kref
)
3895 struct ide_tape_obj
*tape
= to_ide_tape(kref
);
3896 ide_drive_t
*drive
= tape
->drive
;
3897 struct gendisk
*g
= tape
->disk
;
3899 BUG_ON(tape
->first_stage
!= NULL
|| tape
->merge_stage_size
);
3901 drive
->dsc_overlap
= 0;
3902 drive
->driver_data
= NULL
;
3903 device_destroy(idetape_sysfs_class
, MKDEV(IDETAPE_MAJOR
, tape
->minor
));
3904 device_destroy(idetape_sysfs_class
, MKDEV(IDETAPE_MAJOR
, tape
->minor
+ 128));
3905 idetape_devs
[tape
->minor
] = NULL
;
3906 g
->private_data
= NULL
;
3911 #ifdef CONFIG_IDE_PROC_FS
3912 static int proc_idetape_read_name
3913 (char *page
, char **start
, off_t off
, int count
, int *eof
, void *data
)
3915 ide_drive_t
*drive
= (ide_drive_t
*) data
;
3916 idetape_tape_t
*tape
= drive
->driver_data
;
3920 len
= sprintf(out
, "%s\n", tape
->name
);
3921 PROC_IDE_READ_RETURN(page
, start
, off
, count
, eof
, len
);
3924 static ide_proc_entry_t idetape_proc
[] = {
3925 { "capacity", S_IFREG
|S_IRUGO
, proc_ide_read_capacity
, NULL
},
3926 { "name", S_IFREG
|S_IRUGO
, proc_idetape_read_name
, NULL
},
3927 { NULL
, 0, NULL
, NULL
}
3931 static int ide_tape_probe(ide_drive_t
*);
3933 static ide_driver_t idetape_driver
= {
3935 .owner
= THIS_MODULE
,
3937 .bus
= &ide_bus_type
,
3939 .probe
= ide_tape_probe
,
3940 .remove
= ide_tape_remove
,
3941 .version
= IDETAPE_VERSION
,
3943 .supports_dsc_overlap
= 1,
3944 .do_request
= idetape_do_request
,
3945 .end_request
= idetape_end_request
,
3946 .error
= __ide_error
,
3947 .abort
= __ide_abort
,
3948 #ifdef CONFIG_IDE_PROC_FS
3949 .proc
= idetape_proc
,
3954 * Our character device supporting functions, passed to register_chrdev.
3956 static const struct file_operations idetape_fops
= {
3957 .owner
= THIS_MODULE
,
3958 .read
= idetape_chrdev_read
,
3959 .write
= idetape_chrdev_write
,
3960 .ioctl
= idetape_chrdev_ioctl
,
3961 .open
= idetape_chrdev_open
,
3962 .release
= idetape_chrdev_release
,
3965 static int idetape_open(struct inode
*inode
, struct file
*filp
)
3967 struct gendisk
*disk
= inode
->i_bdev
->bd_disk
;
3968 struct ide_tape_obj
*tape
;
3970 if (!(tape
= ide_tape_get(disk
)))
3976 static int idetape_release(struct inode
*inode
, struct file
*filp
)
3978 struct gendisk
*disk
= inode
->i_bdev
->bd_disk
;
3979 struct ide_tape_obj
*tape
= ide_tape_g(disk
);
3986 static int idetape_ioctl(struct inode
*inode
, struct file
*file
,
3987 unsigned int cmd
, unsigned long arg
)
3989 struct block_device
*bdev
= inode
->i_bdev
;
3990 struct ide_tape_obj
*tape
= ide_tape_g(bdev
->bd_disk
);
3991 ide_drive_t
*drive
= tape
->drive
;
3992 int err
= generic_ide_ioctl(drive
, file
, bdev
, cmd
, arg
);
3994 err
= idetape_blkdev_ioctl(drive
, cmd
, arg
);
3998 static struct block_device_operations idetape_block_ops
= {
3999 .owner
= THIS_MODULE
,
4000 .open
= idetape_open
,
4001 .release
= idetape_release
,
4002 .ioctl
= idetape_ioctl
,
4005 static int ide_tape_probe(ide_drive_t
*drive
)
4007 idetape_tape_t
*tape
;
4011 if (!strstr("ide-tape", drive
->driver_req
))
4013 if (!drive
->present
)
4015 if (drive
->media
!= ide_tape
)
4017 if (!idetape_identify_device (drive
)) {
4018 printk(KERN_ERR
"ide-tape: %s: not supported by this version of ide-tape\n", drive
->name
);
4022 printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive
->name
);
4025 if (strstr(drive
->id
->model
, "OnStream DI-")) {
4026 printk(KERN_WARNING
"ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive
->name
);
4027 printk(KERN_WARNING
"ide-tape: OnStream support will be removed soon from ide-tape!\n");
4029 tape
= kzalloc(sizeof (idetape_tape_t
), GFP_KERNEL
);
4031 printk(KERN_ERR
"ide-tape: %s: Can't allocate a tape structure\n", drive
->name
);
4035 g
= alloc_disk(1 << PARTN_BITS
);
4039 ide_init_disk(g
, drive
);
4041 ide_proc_register_driver(drive
, &idetape_driver
);
4043 kref_init(&tape
->kref
);
4045 tape
->drive
= drive
;
4046 tape
->driver
= &idetape_driver
;
4049 g
->private_data
= &tape
->driver
;
4051 drive
->driver_data
= tape
;
4053 mutex_lock(&idetape_ref_mutex
);
4054 for (minor
= 0; idetape_devs
[minor
]; minor
++)
4056 idetape_devs
[minor
] = tape
;
4057 mutex_unlock(&idetape_ref_mutex
);
4059 idetape_setup(drive
, tape
, minor
);
4061 device_create(idetape_sysfs_class
, &drive
->gendev
,
4062 MKDEV(IDETAPE_MAJOR
, minor
), "%s", tape
->name
);
4063 device_create(idetape_sysfs_class
, &drive
->gendev
,
4064 MKDEV(IDETAPE_MAJOR
, minor
+ 128), "n%s", tape
->name
);
4066 g
->fops
= &idetape_block_ops
;
4067 ide_register_region(g
);
4077 MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
4078 MODULE_LICENSE("GPL");
4080 static void __exit
idetape_exit (void)
4082 driver_unregister(&idetape_driver
.gen_driver
);
4083 class_destroy(idetape_sysfs_class
);
4084 unregister_chrdev(IDETAPE_MAJOR
, "ht");
4087 static int __init
idetape_init(void)
4090 idetape_sysfs_class
= class_create(THIS_MODULE
, "ide_tape");
4091 if (IS_ERR(idetape_sysfs_class
)) {
4092 idetape_sysfs_class
= NULL
;
4093 printk(KERN_ERR
"Unable to create sysfs class for ide tapes\n");
4098 if (register_chrdev(IDETAPE_MAJOR
, "ht", &idetape_fops
)) {
4099 printk(KERN_ERR
"ide-tape: Failed to register character device interface\n");
4101 goto out_free_class
;
4104 error
= driver_register(&idetape_driver
.gen_driver
);
4106 goto out_free_driver
;
4111 driver_unregister(&idetape_driver
.gen_driver
);
4113 class_destroy(idetape_sysfs_class
);
4118 MODULE_ALIAS("ide:*m-tape*");
4119 module_init(idetape_init
);
4120 module_exit(idetape_exit
);
4121 MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR
);