ide: add struct ide_tp_ops (take 2)
[deliverable/linux.git] / drivers / ide / legacy / falconide.c
1 /*
2 * Atari Falcon IDE Driver
3 *
4 * Created 12 Jul 1997 by Geert Uytterhoeven
5 *
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file COPYING in the main directory of this archive for
8 * more details.
9 */
10
11 #include <linux/module.h>
12 #include <linux/types.h>
13 #include <linux/mm.h>
14 #include <linux/interrupt.h>
15 #include <linux/blkdev.h>
16 #include <linux/hdreg.h>
17 #include <linux/ide.h>
18 #include <linux/init.h>
19
20 #include <asm/setup.h>
21 #include <asm/atarihw.h>
22 #include <asm/atariints.h>
23 #include <asm/atari_stdma.h>
24
25 #define DRV_NAME "falconide"
26
27 /*
28 * Base of the IDE interface
29 */
30
31 #define ATA_HD_BASE 0xfff00000
32
33 /*
34 * Offsets from the above base
35 */
36
37 #define ATA_HD_CONTROL 0x39
38
39 /*
40 * falconide_intr_lock is used to obtain access to the IDE interrupt,
41 * which is shared between several drivers.
42 */
43
44 int falconide_intr_lock;
45 EXPORT_SYMBOL(falconide_intr_lock);
46
47 static void falconide_input_data(ide_drive_t *drive, struct request *rq,
48 void *buf, unsigned int len)
49 {
50 unsigned long data_addr = drive->hwif->io_ports.data_addr;
51
52 if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
53 return insw(data_addr, buf, (len + 1) / 2);
54
55 insw_swapw(data_addr, buf, (len + 1) / 2);
56 }
57
58 static void falconide_output_data(ide_drive_t *drive, struct request *rq,
59 void *buf, unsigned int len)
60 {
61 unsigned long data_addr = drive->hwif->io_ports.data_addr;
62
63 if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
64 return outsw(data_addr, buf, (len + 1) / 2);
65
66 outsw_swapw(data_addr, buf, (len + 1) / 2);
67 }
68
69 /* Atari has a byte-swapped IDE interface */
70 static const struct ide_tp_ops falconide_tp_ops = {
71 .exec_command = ide_exec_command,
72 .read_status = ide_read_status,
73 .read_altstatus = ide_read_altstatus,
74 .read_sff_dma_status = ide_read_sff_dma_status,
75
76 .set_irq = ide_set_irq,
77
78 .tf_load = ide_tf_load,
79 .tf_read = ide_tf_read,
80
81 .input_data = falconide_input_data,
82 .output_data = falconide_output_data,
83 };
84
85 static const struct ide_port_info falconide_port_info = {
86 .tp_ops = &falconide_tp_ops,
87 .host_flags = IDE_HFLAG_NO_DMA,
88 };
89
90 static void __init falconide_setup_ports(hw_regs_t *hw)
91 {
92 int i;
93
94 memset(hw, 0, sizeof(*hw));
95
96 hw->io_ports.data_addr = ATA_HD_BASE;
97
98 for (i = 1; i < 8; i++)
99 hw->io_ports_array[i] = ATA_HD_BASE + 1 + i * 4;
100
101 hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL;
102
103 hw->irq = IRQ_MFP_IDE;
104 hw->ack_intr = NULL;
105
106 hw->chipset = ide_generic;
107 }
108
109 /*
110 * Probe for a Falcon IDE interface
111 */
112
113 static int __init falconide_init(void)
114 {
115 ide_hwif_t *hwif;
116 hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
117
118 if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
119 return 0;
120
121 printk(KERN_INFO "ide: Falcon IDE controller\n");
122
123 if (!request_mem_region(ATA_HD_BASE, 0x40, DRV_NAME)) {
124 printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
125 return -EBUSY;
126 }
127
128 falconide_setup_ports(&hw);
129
130 hwif = ide_find_port();
131 if (hwif) {
132 u8 index = hwif->index;
133 u8 idx[4] = { index, 0xff, 0xff, 0xff };
134
135 ide_get_lock(NULL, NULL);
136 ide_device_add(idx, &falconide_port_info, hws);
137 ide_release_lock();
138 }
139
140 return 0;
141 }
142
143 module_init(falconide_init);
144
145 MODULE_LICENSE("GPL");
This page took 0.038166 seconds and 5 git commands to generate.