drivers/ide/legacy/ide-cs.c

   1 /*======================================================================
   2
   3     A driver for PCMCIA IDE/ATA disk cards
   4
   5     ide-cs.c 1.3 2002/10/26 05:45:31
   6
   7     The contents of this file are subject to the Mozilla Public
   8     License Version 1.1 (the "License"); you may not use this file
   9     except in compliance with the License. You may obtain a copy of
  10     the License at http://www.mozilla.org/MPL/
  11
  12     Software distributed under the License is distributed on an "AS
  13     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14     implied. See the License for the specific language governing
  15     rights and limitations under the License.
  16
  17     The initial developer of the original code is David A. Hinds
  18     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20
  21     Alternatively, the contents of this file may be used under the
  22     terms of the GNU General Public License version 2 (the "GPL"), in
  23     which case the provisions of the GPL are applicable instead of the
  24     above.  If you wish to allow the use of your version of this file
  25     only under the terms of the GPL and not to allow others to use
  26     your version of this file under the MPL, indicate your decision
  27     by deleting the provisions above and replace them with the notice
  28     and other provisions required by the GPL.  If you do not delete
  29     the provisions above, a recipient may use your version of this
  30     file under either the MPL or the GPL.
  31
  32 ======================================================================*/
  33
  34 #include <linux/module.h>
  35 #include <linux/kernel.h>
  36 #include <linux/init.h>
  37 #include <linux/sched.h>
  38 #include <linux/ptrace.h>
  39 #include <linux/slab.h>
  40 #include <linux/string.h>
  41 #include <linux/timer.h>
  42 #include <linux/ioport.h>
  43 #include <linux/ide.h>
  44 #include <linux/hdreg.h>
  45 #include <linux/major.h>
  46 #include <linux/delay.h>
  47 #include <asm/io.h>
  48 #include <asm/system.h>
  49
  50 #include <pcmcia/cs_types.h>
  51 #include <pcmcia/cs.h>
  52 #include <pcmcia/cistpl.h>
  53 #include <pcmcia/ds.h>
  54 #include <pcmcia/cisreg.h>
  55 #include <pcmcia/ciscode.h>
  56
  57 /*====================================================================*/
  58
  59 /* Module parameters */
  60
  61 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
  62 MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
  63 MODULE_LICENSE("Dual MPL/GPL");
  64
  65 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  66
  67 #ifdef PCMCIA_DEBUG
  68 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
  69 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
  70 static char *version =
  71 "ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
  72 #else
  73 #define DEBUG(n, args...)
  74 #endif
  75
  76 /*====================================================================*/
  77
  78 static const char ide_major[] = {
  79     IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR,
  80     IDE4_MAJOR, IDE5_MAJOR
  81 };
  82
  83 typedef struct ide_info_t {
  84         struct pcmcia_device    *p_dev;
  85     int         ndev;
  86     dev_node_t  node;
  87     int         hd;
  88 } ide_info_t;
  89
  90 static void ide_release(struct pcmcia_device *);
  91 static int ide_config(struct pcmcia_device *);
  92
  93 static void ide_detach(struct pcmcia_device *p_dev);
  94
  95
  96
  97
  98 /*======================================================================
  99
 100     ide_attach() creates an "instance" of the driver, allocating
 101     local data structures for one device.  The device is registered
 102     with Card Services.
 103
 104 ======================================================================*/
 105
 106 static int ide_probe(struct pcmcia_device *link)
 107 {
 108     ide_info_t *info;
 109
 110     DEBUG(0, "ide_attach()\n");
 111
 112     /* Create new ide device */
 113     info = kzalloc(sizeof(*info), GFP_KERNEL);
 114     if (!info)
 115         return -ENOMEM;
 116
 117     info->p_dev = link;
 118     link->priv = info;
 119
 120     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 121     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 122     link->io.IOAddrLines = 3;
 123     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
 124     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 125     link->conf.Attributes = CONF_ENABLE_IRQ;
 126     link->conf.IntType = INT_MEMORY_AND_IO;
 127
 128     return ide_config(link);
 129 } /* ide_attach */
 130
 131 /*======================================================================
 132
 133     This deletes a driver "instance".  The device is de-registered
 134     with Card Services.  If it has been released, all local data
 135     structures are freed.  Otherwise, the structures will be freed
 136     when the device is released.
 137
 138 ======================================================================*/
 139
 140 static void ide_detach(struct pcmcia_device *link)
 141 {
 142     DEBUG(0, "ide_detach(0x%p)\n", link);
 143
 144     ide_release(link);
 145
 146     kfree(link->priv);
 147 } /* ide_detach */
 148
 149 static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 150 {
 151     hw_regs_t hw;
 152     memset(&hw, 0, sizeof(hw));
 153     ide_init_hwif_ports(&hw, io, ctl, NULL);
 154     hw.irq = irq;
 155     hw.chipset = ide_pci;
 156     hw.dev = &handle->dev;
 157     return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
 158 }
 159
 160 /*======================================================================
 161
 162     ide_config() is scheduled to run after a CARD_INSERTION event
 163     is received, to configure the PCMCIA socket, and to make the
 164     ide device available to the system.
 165
 166 ======================================================================*/
 167
 168 #define CS_CHECK(fn, ret) \
 169 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 170
 171 static int ide_config(struct pcmcia_device *link)
 172 {
 173     ide_info_t *info = link->priv;
 174     tuple_t tuple;
 175     struct {
 176         u_short         buf[128];
 177         cisparse_t      parse;
 178         config_info_t   conf;
 179         cistpl_cftable_entry_t dflt;
 180     } *stk = NULL;
 181     cistpl_cftable_entry_t *cfg;
 182     int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
 183     unsigned long io_base, ctl_base;
 184
 185     DEBUG(0, "ide_config(0x%p)\n", link);
 186
 187     stk = kzalloc(sizeof(*stk), GFP_KERNEL);
 188     if (!stk) goto err_mem;
 189     cfg = &stk->parse.cftable_entry;
 190
 191     tuple.TupleData = (cisdata_t *)&stk->buf;
 192     tuple.TupleOffset = 0;
 193     tuple.TupleDataMax = 255;
 194     tuple.Attributes = 0;
 195     tuple.DesiredTuple = CISTPL_CONFIG;
 196     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
 197     CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
 198     CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &stk->parse));
 199     link->conf.ConfigBase = stk->parse.config.base;
 200     link->conf.Present = stk->parse.config.rmask[0];
 201
 202     tuple.DesiredTuple = CISTPL_MANFID;
 203     if (!pcmcia_get_first_tuple(link, &tuple) &&
 204         !pcmcia_get_tuple_data(link, &tuple) &&
 205         !pcmcia_parse_tuple(link, &tuple, &stk->parse))
 206         is_kme = ((stk->parse.manfid.manf == MANFID_KME) &&
 207                   ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) ||
 208                    (stk->parse.manfid.card == PRODID_KME_KXLC005_B)));
 209
 210     /* Not sure if this is right... look up the current Vcc */
 211     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
 212
 213     pass = io_base = ctl_base = 0;
 214     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 215     tuple.Attributes = 0;
 216     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
 217     while (1) {
 218         if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry;
 219         if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry;
 220
 221         /* Check for matching Vcc, unless we're desperate */
 222         if (!pass) {
 223             if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 224                 if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
 225                     goto next_entry;
 226             } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
 227                 if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
 228                     goto next_entry;
 229             }
 230         }
 231
 232         if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 233             link->conf.Vpp =
 234                 cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 235         else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
 236             link->conf.Vpp =
 237                 stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 238
 239         if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
 240             cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
 241             link->conf.ConfigIndex = cfg->index;
 242             link->io.BasePort1 = io->win[0].base;
 243             link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 244             if (!(io->flags & CISTPL_IO_16BIT))
 245                 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 246             if (io->nwin == 2) {
 247                 link->io.NumPorts1 = 8;
 248                 link->io.BasePort2 = io->win[1].base;
 249                 link->io.NumPorts2 = (is_kme) ? 2 : 1;
 250                 if (pcmcia_request_io(link, &link->io) != 0)
 251                         goto next_entry;
 252                 io_base = link->io.BasePort1;
 253                 ctl_base = link->io.BasePort2;
 254             } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
 255                 link->io.NumPorts1 = io->win[0].len;
 256                 link->io.NumPorts2 = 0;
 257                 if (pcmcia_request_io(link, &link->io) != 0)
 258                         goto next_entry;
 259                 io_base = link->io.BasePort1;
 260                 ctl_base = link->io.BasePort1 + 0x0e;
 261             } else goto next_entry;
 262             /* If we've got this far, we're done */
 263             break;
 264         }
 265
 266     next_entry:
 267         if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 268             memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
 269         if (pass) {
 270             CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
 271         } else if (pcmcia_get_next_tuple(link, &tuple) != 0) {
 272             CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
 273             memset(&stk->dflt, 0, sizeof(stk->dflt));
 274             pass++;
 275         }
 276     }
 277
 278     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 279     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 280
 281     /* disable drive interrupts during IDE probe */
 282     outb(0x02, ctl_base);
 283
 284     /* special setup for KXLC005 card */
 285     if (is_kme)
 286         outb(0x81, ctl_base+1);
 287
 288     /* retry registration in case device is still spinning up */
 289     for (hd = -1, i = 0; i < 10; i++) {
 290         hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
 291         if (hd >= 0) break;
 292         if (link->io.NumPorts1 == 0x20) {
 293             outb(0x02, ctl_base + 0x10);
 294             hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
 295                                 link->irq.AssignedIRQ, link);
 296             if (hd >= 0) {
 297                 io_base += 0x10;
 298                 ctl_base += 0x10;
 299                 break;
 300             }
 301         }
 302         msleep(100);
 303     }
 304
 305     if (hd < 0) {
 306         printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
 307                ", irq %u failed\n", io_base, ctl_base,
 308                link->irq.AssignedIRQ);
 309         goto failed;
 310     }
 311
 312     info->ndev = 1;
 313     sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));
 314     info->node.major = ide_major[hd];
 315     info->node.minor = 0;
 316     info->hd = hd;
 317     link->dev_node = &info->node;
 318     printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
 319            info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
 320
 321     kfree(stk);
 322     return 0;
 323
 324 err_mem:
 325     printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
 326     goto failed;
 327
 328 cs_failed:
 329     cs_error(link, last_fn, last_ret);
 330 failed:
 331     kfree(stk);
 332     ide_release(link);
 333     return -ENODEV;
 334 } /* ide_config */
 335
 336 /*======================================================================
 337
 338     After a card is removed, ide_release() will unregister the net
 339     device, and release the PCMCIA configuration.  If the device is
 340     still open, this will be postponed until it is closed.
 341
 342 ======================================================================*/
 343
 344 void ide_release(struct pcmcia_device *link)
 345 {
 346     ide_info_t *info = link->priv;
 347
 348     DEBUG(0, "ide_release(0x%p)\n", link);
 349
 350     if (info->ndev) {
 351         /* FIXME: if this fails we need to queue the cleanup somehow
 352            -- need to investigate the required PCMCIA magic */
 353         ide_unregister(info->hd);
 354     }
 355     info->ndev = 0;
 356
 357     pcmcia_disable_device(link);
 358 } /* ide_release */
 359
 360
 361 /*======================================================================
 362
 363     The card status event handler.  Mostly, this schedules other
 364     stuff to run after an event is received.  A CARD_REMOVAL event
 365     also sets some flags to discourage the ide drivers from
 366     talking to the ports.
 367
 368 ======================================================================*/
 369
 370 static struct pcmcia_device_id ide_ids[] = {
 371         PCMCIA_DEVICE_FUNC_ID(4),
 372         PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),        /* Hitachi */
 373         PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
 374         PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
 375         PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),        /* Toshiba */
 376         PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 377         PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),        /* Samsung */
 378         PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),        /* Hitachi */
 379         PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
 380         PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),        /* Lexar */
 381         PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
 382         PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
 383         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 384         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 385         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
 386         PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 387         PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 388         PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
 389         PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
 390         PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
 391         PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
 392         PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 393         PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 394         PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
 395         PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 396         PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 397         PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 398         PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 399         PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
 400         PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 401         PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
 402         PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
 403         PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
 404         PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 405         PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
 406         PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 407         PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
 408         PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
 409         PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
 410         PCMCIA_DEVICE_NULL,
 411 };
 412 MODULE_DEVICE_TABLE(pcmcia, ide_ids);
 413
 414 static struct pcmcia_driver ide_cs_driver = {
 415         .owner          = THIS_MODULE,
 416         .drv            = {
 417                 .name   = "ide-cs",
 418         },
 419         .probe          = ide_probe,
 420         .remove         = ide_detach,
 421         .id_table       = ide_ids,
 422 };
 423
 424 static int __init init_ide_cs(void)
 425 {
 426         return pcmcia_register_driver(&ide_cs_driver);
 427 }
 428
 429 static void __exit exit_ide_cs(void)
 430 {
 431         pcmcia_unregister_driver(&ide_cs_driver);
 432 }
 433
 434 late_initcall(init_ide_cs);
 435 module_exit(exit_ide_cs);