1 /*======================================================================
3 A driver for PCMCIA IDE/ATA disk cards
5 The contents of this file are subject to the Mozilla Public
6 License Version 1.1 (the "License"); you may not use this file
7 except in compliance with the License. You may obtain a copy of
8 the License at http://www.mozilla.org/MPL/
10 Software distributed under the License is distributed on an "AS
11 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
12 implied. See the License for the specific language governing
13 rights and limitations under the License.
15 The initial developer of the original code is David A. Hinds
16 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
17 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
19 Alternatively, the contents of this file may be used under the
20 terms of the GNU General Public License version 2 (the "GPL"), in
21 which case the provisions of the GPL are applicable instead of the
22 above. If you wish to allow the use of your version of this file
23 only under the terms of the GPL and not to allow others to use
24 your version of this file under the MPL, indicate your decision
25 by deleting the provisions above and replace them with the notice
26 and other provisions required by the GPL. If you do not delete
27 the provisions above, a recipient may use your version of this
28 file under either the MPL or the GPL.
30 ======================================================================*/
32 #include <linux/module.h>
33 #include <linux/kernel.h>
34 #include <linux/init.h>
35 #include <linux/ptrace.h>
36 #include <linux/slab.h>
37 #include <linux/string.h>
38 #include <linux/timer.h>
39 #include <linux/ioport.h>
40 #include <linux/ide.h>
41 #include <linux/hdreg.h>
42 #include <linux/major.h>
43 #include <linux/delay.h>
45 #include <asm/system.h>
47 #include <pcmcia/cs_types.h>
48 #include <pcmcia/cs.h>
49 #include <pcmcia/cistpl.h>
50 #include <pcmcia/ds.h>
51 #include <pcmcia/cisreg.h>
52 #include <pcmcia/ciscode.h>
54 #define DRV_NAME "ide-cs"
56 /*====================================================================*/
58 /* Module parameters */
60 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
61 MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
62 MODULE_LICENSE("Dual MPL/GPL");
64 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
66 #ifdef CONFIG_PCMCIA_DEBUG
67 INT_MODULE_PARM(pc_debug
, 0);
68 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
70 #define DEBUG(n, args...)
73 /*====================================================================*/
75 typedef struct ide_info_t
{
76 struct pcmcia_device
*p_dev
;
82 static void ide_release(struct pcmcia_device
*);
83 static int ide_config(struct pcmcia_device
*);
85 static void ide_detach(struct pcmcia_device
*p_dev
);
90 /*======================================================================
92 ide_attach() creates an "instance" of the driver, allocating
93 local data structures for one device. The device is registered
96 ======================================================================*/
98 static int ide_probe(struct pcmcia_device
*link
)
102 DEBUG(0, "ide_attach()\n");
104 /* Create new ide device */
105 info
= kzalloc(sizeof(*info
), GFP_KERNEL
);
112 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
113 link
->io
.Attributes2
= IO_DATA_PATH_WIDTH_8
;
114 link
->io
.IOAddrLines
= 3;
115 link
->irq
.Attributes
= IRQ_TYPE_DYNAMIC_SHARING
;
116 link
->irq
.IRQInfo1
= IRQ_LEVEL_ID
;
117 link
->conf
.Attributes
= CONF_ENABLE_IRQ
;
118 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
120 return ide_config(link
);
123 /*======================================================================
125 This deletes a driver "instance". The device is de-registered
126 with Card Services. If it has been released, all local data
127 structures are freed. Otherwise, the structures will be freed
128 when the device is released.
130 ======================================================================*/
132 static void ide_detach(struct pcmcia_device
*link
)
134 ide_info_t
*info
= link
->priv
;
135 ide_hwif_t
*hwif
= info
->hwif
;
136 unsigned long data_addr
, ctl_addr
;
138 DEBUG(0, "ide_detach(0x%p)\n", link
);
140 data_addr
= hwif
->io_ports
.data_addr
;
141 ctl_addr
= hwif
->io_ports
.ctl_addr
;
145 release_region(ctl_addr
, 1);
146 release_region(data_addr
, 8);
151 static const struct ide_port_ops idecs_port_ops
= {
152 .quirkproc
= ide_undecoded_slave
,
155 static ide_hwif_t
*idecs_register(unsigned long io
, unsigned long ctl
,
156 unsigned long irq
, struct pcmcia_device
*handle
)
161 u8 idx
[4] = { 0xff, 0xff, 0xff, 0xff };
163 if (!request_region(io
, 8, DRV_NAME
)) {
164 printk(KERN_ERR
"%s: I/O resource 0x%lX-0x%lX not free.\n",
165 DRV_NAME
, io
, io
+ 7);
169 if (!request_region(ctl
, 1, DRV_NAME
)) {
170 printk(KERN_ERR
"%s: I/O resource 0x%lX not free.\n",
172 release_region(io
, 8);
176 memset(&hw
, 0, sizeof(hw
));
177 ide_std_init_ports(&hw
, io
, ctl
);
179 hw
.chipset
= ide_pci
;
180 hw
.dev
= &handle
->dev
;
182 hwif
= ide_find_port();
188 ide_init_port_data(hwif
, i
);
189 ide_init_port_hw(hwif
, &hw
);
190 hwif
->port_ops
= &idecs_port_ops
;
194 ide_device_add(idx
, NULL
);
199 /* retry registration in case device is still spinning up */
200 for (i
= 0; i
< 10; i
++) {
210 release_region(ctl
, 1);
211 release_region(io
, 8);
215 /*======================================================================
217 ide_config() is scheduled to run after a CARD_INSERTION event
218 is received, to configure the PCMCIA socket, and to make the
219 ide device available to the system.
221 ======================================================================*/
223 #define CS_CHECK(fn, ret) \
224 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
226 static int ide_config(struct pcmcia_device
*link
)
228 ide_info_t
*info
= link
->priv
;
234 cistpl_cftable_entry_t dflt
;
236 cistpl_cftable_entry_t
*cfg
;
237 int pass
, last_ret
= 0, last_fn
= 0, is_kme
= 0;
238 unsigned long io_base
, ctl_base
;
241 DEBUG(0, "ide_config(0x%p)\n", link
);
243 stk
= kzalloc(sizeof(*stk
), GFP_KERNEL
);
244 if (!stk
) goto err_mem
;
245 cfg
= &stk
->parse
.cftable_entry
;
247 tuple
.TupleData
= (cisdata_t
*)&stk
->buf
;
248 tuple
.TupleOffset
= 0;
249 tuple
.TupleDataMax
= 255;
250 tuple
.Attributes
= 0;
252 is_kme
= ((link
->manf_id
== MANFID_KME
) &&
253 ((link
->card_id
== PRODID_KME_KXLC005_A
) ||
254 (link
->card_id
== PRODID_KME_KXLC005_B
)));
256 /* Not sure if this is right... look up the current Vcc */
257 CS_CHECK(GetConfigurationInfo
, pcmcia_get_configuration_info(link
, &stk
->conf
));
259 pass
= io_base
= ctl_base
= 0;
260 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
261 tuple
.Attributes
= 0;
262 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(link
, &tuple
));
264 if (pcmcia_get_tuple_data(link
, &tuple
) != 0) goto next_entry
;
265 if (pcmcia_parse_tuple(link
, &tuple
, &stk
->parse
) != 0) goto next_entry
;
267 /* Check for matching Vcc, unless we're desperate */
269 if (cfg
->vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
270 if (stk
->conf
.Vcc
!= cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000)
272 } else if (stk
->dflt
.vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
273 if (stk
->conf
.Vcc
!= stk
->dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000)
278 if (cfg
->vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
280 cfg
->vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
281 else if (stk
->dflt
.vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
283 stk
->dflt
.vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
285 if ((cfg
->io
.nwin
> 0) || (stk
->dflt
.io
.nwin
> 0)) {
286 cistpl_io_t
*io
= (cfg
->io
.nwin
) ? &cfg
->io
: &stk
->dflt
.io
;
287 link
->conf
.ConfigIndex
= cfg
->index
;
288 link
->io
.BasePort1
= io
->win
[0].base
;
289 link
->io
.IOAddrLines
= io
->flags
& CISTPL_IO_LINES_MASK
;
290 if (!(io
->flags
& CISTPL_IO_16BIT
))
291 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_8
;
293 link
->io
.NumPorts1
= 8;
294 link
->io
.BasePort2
= io
->win
[1].base
;
295 link
->io
.NumPorts2
= (is_kme
) ? 2 : 1;
296 if (pcmcia_request_io(link
, &link
->io
) != 0)
298 io_base
= link
->io
.BasePort1
;
299 ctl_base
= link
->io
.BasePort2
;
300 } else if ((io
->nwin
== 1) && (io
->win
[0].len
>= 16)) {
301 link
->io
.NumPorts1
= io
->win
[0].len
;
302 link
->io
.NumPorts2
= 0;
303 if (pcmcia_request_io(link
, &link
->io
) != 0)
305 io_base
= link
->io
.BasePort1
;
306 ctl_base
= link
->io
.BasePort1
+ 0x0e;
307 } else goto next_entry
;
308 /* If we've got this far, we're done */
313 if (cfg
->flags
& CISTPL_CFTABLE_DEFAULT
)
314 memcpy(&stk
->dflt
, cfg
, sizeof(stk
->dflt
));
316 CS_CHECK(GetNextTuple
, pcmcia_get_next_tuple(link
, &tuple
));
317 } else if (pcmcia_get_next_tuple(link
, &tuple
) != 0) {
318 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(link
, &tuple
));
319 memset(&stk
->dflt
, 0, sizeof(stk
->dflt
));
324 CS_CHECK(RequestIRQ
, pcmcia_request_irq(link
, &link
->irq
));
325 CS_CHECK(RequestConfiguration
, pcmcia_request_configuration(link
, &link
->conf
));
327 /* disable drive interrupts during IDE probe */
328 outb(0x02, ctl_base
);
330 /* special setup for KXLC005 card */
332 outb(0x81, ctl_base
+1);
334 hwif
= idecs_register(io_base
, ctl_base
, link
->irq
.AssignedIRQ
, link
);
335 if (hwif
== NULL
&& link
->io
.NumPorts1
== 0x20) {
336 outb(0x02, ctl_base
+ 0x10);
337 hwif
= idecs_register(io_base
+ 0x10, ctl_base
+ 0x10,
338 link
->irq
.AssignedIRQ
, link
);
345 sprintf(info
->node
.dev_name
, "hd%c", 'a' + hwif
->index
* 2);
346 info
->node
.major
= hwif
->major
;
347 info
->node
.minor
= 0;
349 link
->dev_node
= &info
->node
;
350 printk(KERN_INFO
"ide-cs: %s: Vpp = %d.%d\n",
351 info
->node
.dev_name
, link
->conf
.Vpp
/ 10, link
->conf
.Vpp
% 10);
357 printk(KERN_NOTICE
"ide-cs: ide_config failed memory allocation\n");
361 cs_error(link
, last_fn
, last_ret
);
368 /*======================================================================
370 After a card is removed, ide_release() will unregister the net
371 device, and release the PCMCIA configuration. If the device is
372 still open, this will be postponed until it is closed.
374 ======================================================================*/
376 static void ide_release(struct pcmcia_device
*link
)
378 ide_info_t
*info
= link
->priv
;
379 ide_hwif_t
*hwif
= info
->hwif
;
381 DEBUG(0, "ide_release(0x%p)\n", link
);
384 /* FIXME: if this fails we need to queue the cleanup somehow
385 -- need to investigate the required PCMCIA magic */
386 ide_unregister(hwif
);
390 pcmcia_disable_device(link
);
394 /*======================================================================
396 The card status event handler. Mostly, this schedules other
397 stuff to run after an event is received. A CARD_REMOVAL event
398 also sets some flags to discourage the ide drivers from
399 talking to the ports.
401 ======================================================================*/
403 static struct pcmcia_device_id ide_ids
[] = {
404 PCMCIA_DEVICE_FUNC_ID(4),
405 PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
406 PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
407 PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
408 PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
409 PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
410 PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
411 PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
412 PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
413 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
414 PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
415 PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
416 PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
417 PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
418 PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
419 PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
420 PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
421 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
422 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
423 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
424 PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
425 PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
426 PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
427 PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
428 PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
429 PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
430 PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
431 PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
432 PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
433 PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
434 PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
435 PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
436 PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
437 PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
438 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
439 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
440 PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
441 PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
442 PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
443 PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
444 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
445 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
446 PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
447 PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
448 PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
449 PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
450 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
451 PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
452 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
453 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
454 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
455 PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
456 PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
457 PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
458 PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
459 PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
460 PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
463 MODULE_DEVICE_TABLE(pcmcia
, ide_ids
);
465 static struct pcmcia_driver ide_cs_driver
= {
466 .owner
= THIS_MODULE
,
471 .remove
= ide_detach
,
475 static int __init
init_ide_cs(void)
477 return pcmcia_register_driver(&ide_cs_driver
);
480 static void __exit
exit_ide_cs(void)
482 pcmcia_unregister_driver(&ide_cs_driver
);
485 late_initcall(init_ide_cs
);
486 module_exit(exit_ide_cs
);