projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ide: move ide_rate_filter() calls to the upper layer (take 2)
[deliverable/linux.git] / drivers / ide / pci / sis5513.c
1 /*
2 * linux/drivers/ide/pci/sis5513.c Version 0.26 Jul 7, 2007
3 *
4 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
6 * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
7 * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
8 *
9 * May be copied or modified under the terms of the GNU General Public License
10 *
11 *
12 * Thanks :
13 *
14 * SiS Taiwan : for direct support and hardware.
15 * Daniela Engert : for initial ATA100 advices and numerous others.
16 * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
17 * for checking code correctness, providing patches.
18 *
19 *
20 * Original tests and design on the SiS620 chipset.
21 * ATA100 tests and design on the SiS735 chipset.
22 * ATA16/33 support from specs
23 * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
24 * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz>
25 *
26 * Documentation:
27 * SiS chipset documentation available under NDA to companies only
28 * (not to individuals).
29 */
30
31 /*
32 * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
33 * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
34 * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
35 *
36 * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
37 * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
38 * can figure out that we have a more modern and more capable 5513 by looking
39 * for the respective NorthBridge IDs.
40 *
41 * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
42 * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
43 * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
44 * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
45 * bits, changing its device id to the true one - 5517 for 961 and 5518 for
46 * 962/963.
47 */
48
49 #include <linux/types.h>
50 #include <linux/module.h>
51 #include <linux/kernel.h>
52 #include <linux/delay.h>
53 #include <linux/timer.h>
54 #include <linux/mm.h>
55 #include <linux/ioport.h>
56 #include <linux/blkdev.h>
57 #include <linux/hdreg.h>
58
59 #include <linux/interrupt.h>
60 #include <linux/pci.h>
61 #include <linux/init.h>
62 #include <linux/ide.h>
63
64 #include <asm/irq.h>
65
66 #include "ide-timing.h"
67
68 #define DISPLAY_SIS_TIMINGS
69
70 /* registers layout and init values are chipset family dependant */
71
72 #define ATA_16 0x01
73 #define ATA_33 0x02
74 #define ATA_66 0x03
75 #define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout
76 #define ATA_100 0x05
77 #define ATA_133a 0x06 // SiS961b with 133 support
78 #define ATA_133 0x07 // SiS962/963
79
80 static u8 chipset_family;
81
82 /*
83 * Devices supported
84 */
85 static const struct {
86 const char *name;
87 u16 host_id;
88 u8 chipset_family;
89 u8 flags;
90 } SiSHostChipInfo[] = {
91 { "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 },
92 { "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 },
93 { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 },
94 { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
95 { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
96 { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 },
97 { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 },
98 { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 },
99
100 { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a },
101 { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a },
102
103 { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 },
104 { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 },
105 { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 },
106 { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 },
107 { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 },
108
109 { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 },
110 { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 },
111 { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 },
112 { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 },
113 { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 },
114 { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 },
115
116 { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 },
117 { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 },
118 { "SiS5517", PCI_DEVICE_ID_SI_5517, ATA_16 },
119 { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 },
120 };
121
122 /* Cycle time bits and values vary across chip dma capabilities
123 These three arrays hold the register layout and the values to set.
124 Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
125
126 /* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
127 static u8 cycle_time_offset[] = {0,0,5,4,4,0,0};
128 static u8 cycle_time_range[] = {0,0,2,3,3,4,4};
129 static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
130 {0,0,0,0,0,0,0}, /* no udma */
131 {0,0,0,0,0,0,0}, /* no udma */
132 {3,2,1,0,0,0,0}, /* ATA_33 */
133 {7,5,3,2,1,0,0}, /* ATA_66 */
134 {7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */
135 {11,7,5,4,2,1,0}, /* ATA_100 */
136 {15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */
137 {15,10,7,5,3,2,1}, /* ATA_133 */
138 };
139 /* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
140 See SiS962 data sheet for more detail */
141 static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
142 {0,0,0,0,0,0,0}, /* no udma */
143 {0,0,0,0,0,0,0}, /* no udma */
144 {2,1,1,0,0,0,0},
145 {4,3,2,1,0,0,0},
146 {4,3,2,1,0,0,0},
147 {6,4,3,1,1,1,0},
148 {9,6,4,2,2,2,2},
149 {9,6,4,2,2,2,2},
150 };
151 /* Initialize time, Active time, Recovery time vary across
152 IDE clock settings. These 3 arrays hold the register value
153 for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
154 static u8 ini_time_value[][8] = {
155 {0,0,0,0,0,0,0,0},
156 {0,0,0,0,0,0,0,0},
157 {2,1,0,0,0,1,0,0},
158 {4,3,1,1,1,3,1,1},
159 {4,3,1,1,1,3,1,1},
160 {6,4,2,2,2,4,2,2},
161 {9,6,3,3,3,6,3,3},
162 {9,6,3,3,3,6,3,3},
163 };
164 static u8 act_time_value[][8] = {
165 {0,0,0,0,0,0,0,0},
166 {0,0,0,0,0,0,0,0},
167 {9,9,9,2,2,7,2,2},
168 {19,19,19,5,4,14,5,4},
169 {19,19,19,5,4,14,5,4},
170 {28,28,28,7,6,21,7,6},
171 {38,38,38,10,9,28,10,9},
172 {38,38,38,10,9,28,10,9},
173 };
174 static u8 rco_time_value[][8] = {
175 {0,0,0,0,0,0,0,0},
176 {0,0,0,0,0,0,0,0},
177 {9,2,0,2,0,7,1,1},
178 {19,5,1,5,2,16,3,2},
179 {19,5,1,5,2,16,3,2},
180 {30,9,3,9,4,25,6,4},
181 {40,12,4,12,5,34,12,5},
182 {40,12,4,12,5,34,12,5},
183 };
184
185 /*
186 * Printing configuration
187 */
188 /* Used for chipset type printing at boot time */
189 static char* chipset_capability[] = {
190 "ATA", "ATA 16",
191 "ATA 33", "ATA 66",
192 "ATA 100 (1st gen)", "ATA 100 (2nd gen)",
193 "ATA 133 (1st gen)", "ATA 133 (2nd gen)"
194 };
195
196 #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
197 #include <linux/stat.h>
198 #include <linux/proc_fs.h>
199
200 static u8 sis_proc = 0;
201
202 static struct pci_dev *bmide_dev;
203
204 static char* cable_type[] = {
205 "80 pins",
206 "40 pins"
207 };
208
209 static char* recovery_time[] ={
210 "12 PCICLK", "1 PCICLK",
211 "2 PCICLK", "3 PCICLK",
212 "4 PCICLK", "5 PCICLCK",
213 "6 PCICLK", "7 PCICLCK",
214 "8 PCICLK", "9 PCICLCK",
215 "10 PCICLK", "11 PCICLK",
216 "13 PCICLK", "14 PCICLK",
217 "15 PCICLK", "15 PCICLK"
218 };
219
220 static char* active_time[] = {
221 "8 PCICLK", "1 PCICLCK",
222 "2 PCICLK", "3 PCICLK",
223 "4 PCICLK", "5 PCICLK",
224 "6 PCICLK", "12 PCICLK"
225 };
226
227 static char* cycle_time[] = {
228 "Reserved", "2 CLK",
229 "3 CLK", "4 CLK",
230 "5 CLK", "6 CLK",
231 "7 CLK", "8 CLK",
232 "9 CLK", "10 CLK",
233 "11 CLK", "12 CLK",
234 "13 CLK", "14 CLK",
235 "15 CLK", "16 CLK"
236 };
237
238 /* Generic add master or slave info function */
239 static char* get_drives_info (char *buffer, u8 pos)
240 {
241 u8 reg00, reg01, reg10, reg11; /* timing registers */
242 u32 regdw0, regdw1;
243 char* p = buffer;
244
245 /* Postwrite/Prefetch */
246 if (chipset_family < ATA_133) {
247 pci_read_config_byte(bmide_dev, 0x4b, &reg00);
248 p += sprintf(p, "Drive %d: Postwrite %s \t \t Postwrite %s\n",
249 pos, (reg00 & (0x10 << pos)) ? "Enabled" : "Disabled",
250 (reg00 & (0x40 << pos)) ? "Enabled" : "Disabled");
251 p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n",
252 (reg00 & (0x01 << pos)) ? "Enabled" : "Disabled",
253 (reg00 & (0x04 << pos)) ? "Enabled" : "Disabled");
254 pci_read_config_byte(bmide_dev, 0x40+2*pos, &reg00);
255 pci_read_config_byte(bmide_dev, 0x41+2*pos, &reg01);
256 pci_read_config_byte(bmide_dev, 0x44+2*pos, &reg10);
257 pci_read_config_byte(bmide_dev, 0x45+2*pos, &reg11);
258 } else {
259 u32 reg54h;
260 u8 drive_pci = 0x40;
261 pci_read_config_dword(bmide_dev, 0x54, &reg54h);
262 if (reg54h & 0x40000000) {
263 // Configuration space remapped to 0x70
264 drive_pci = 0x70;
265 }
266 pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos, &regdw0);
267 pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos+8, &regdw1);
268
269 p += sprintf(p, "Drive %d:\n", pos);
270 }
271
272
273 /* UDMA */
274 if (chipset_family >= ATA_133) {
275 p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
276 (regdw0 & 0x04) ? "Enabled" : "Disabled",
277 (regdw1 & 0x04) ? "Enabled" : "Disabled");
278 p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
279 cycle_time[(regdw0 & 0xF0) >> 4],
280 cycle_time[(regdw1 & 0xF0) >> 4]);
281 } else if (chipset_family >= ATA_33) {
282 p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
283 (reg01 & 0x80) ? "Enabled" : "Disabled",
284 (reg11 & 0x80) ? "Enabled" : "Disabled");
285
286 p += sprintf(p, " UDMA Cycle Time ");
287 switch(chipset_family) {
288 case ATA_33: p += sprintf(p, cycle_time[(reg01 & 0x60) >> 5]); break;
289 case ATA_66:
290 case ATA_100a: p += sprintf(p, cycle_time[(reg01 & 0x70) >> 4]); break;
291 case ATA_100:
292 case ATA_133a: p += sprintf(p, cycle_time[reg01 & 0x0F]); break;
293 default: p += sprintf(p, "?"); break;
294 }
295 p += sprintf(p, " \t UDMA Cycle Time ");
296 switch(chipset_family) {
297 case ATA_33: p += sprintf(p, cycle_time[(reg11 & 0x60) >> 5]); break;
298 case ATA_66:
299 case ATA_100a: p += sprintf(p, cycle_time[(reg11 & 0x70) >> 4]); break;
300 case ATA_100:
301 case ATA_133a: p += sprintf(p, cycle_time[reg11 & 0x0F]); break;
302 default: p += sprintf(p, "?"); break;
303 }
304 p += sprintf(p, "\n");
305 }
306
307
308 if (chipset_family < ATA_133) { /* else case TODO */
309
310 /* Data Active */
311 p += sprintf(p, " Data Active Time ");
312 switch(chipset_family) {
313 case ATA_16: /* confirmed */
314 case ATA_33:
315 case ATA_66:
316 case ATA_100a: p += sprintf(p, active_time[reg01 & 0x07]); break;
317 case ATA_100:
318 case ATA_133a: p += sprintf(p, active_time[(reg00 & 0x70) >> 4]); break;
319 default: p += sprintf(p, "?"); break;
320 }
321 p += sprintf(p, " \t Data Active Time ");
322 switch(chipset_family) {
323 case ATA_16:
324 case ATA_33:
325 case ATA_66:
326 case ATA_100a: p += sprintf(p, active_time[reg11 & 0x07]); break;
327 case ATA_100:
328 case ATA_133a: p += sprintf(p, active_time[(reg10 & 0x70) >> 4]); break;
329 default: p += sprintf(p, "?"); break;
330 }
331 p += sprintf(p, "\n");
332
333 /* Data Recovery */
334 /* warning: may need (reg&0x07) for pre ATA66 chips */
335 p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
336 recovery_time[reg00 & 0x0f], recovery_time[reg10 & 0x0f]);
337 }
338
339 return p;
340 }
341
342 static char* get_masters_info(char* buffer)
343 {
344 return get_drives_info(buffer, 0);
345 }
346
347 static char* get_slaves_info(char* buffer)
348 {
349 return get_drives_info(buffer, 1);
350 }
351
352 /* Main get_info, called on /proc/ide/sis reads */
353 static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
354 {
355 char *p = buffer;
356 int len;
357 u8 reg;
358 u16 reg2, reg3;
359
360 p += sprintf(p, "\nSiS 5513 ");
361 switch(chipset_family) {
362 case ATA_16: p += sprintf(p, "DMA 16"); break;
363 case ATA_33: p += sprintf(p, "Ultra 33"); break;
364 case ATA_66: p += sprintf(p, "Ultra 66"); break;
365 case ATA_100a:
366 case ATA_100: p += sprintf(p, "Ultra 100"); break;
367 case ATA_133a:
368 case ATA_133: p += sprintf(p, "Ultra 133"); break;
369 default: p+= sprintf(p, "Unknown???"); break;
370 }
371 p += sprintf(p, " chipset\n");
372 p += sprintf(p, "--------------- Primary Channel "
373 "---------------- Secondary Channel "
374 "-------------\n");
375
376 /* Status */
377 pci_read_config_byte(bmide_dev, 0x4a, &reg);
378 if (chipset_family == ATA_133) {
379 pci_read_config_word(bmide_dev, 0x50, &reg2);
380 pci_read_config_word(bmide_dev, 0x52, &reg3);
381 }
382 p += sprintf(p, "Channel Status: ");
383 if (chipset_family < ATA_66) {
384 p += sprintf(p, "%s \t \t \t \t %s\n",
385 (reg & 0x04) ? "On" : "Off",
386 (reg & 0x02) ? "On" : "Off");
387 } else if (chipset_family < ATA_133) {
388 p += sprintf(p, "%s \t \t \t \t %s \n",
389 (reg & 0x02) ? "On" : "Off",
390 (reg & 0x04) ? "On" : "Off");
391 } else { /* ATA_133 */
392 p += sprintf(p, "%s \t \t \t \t %s \n",
393 (reg2 & 0x02) ? "On" : "Off",
394 (reg3 & 0x02) ? "On" : "Off");
395 }
396
397 /* Operation Mode */
398 pci_read_config_byte(bmide_dev, 0x09, &reg);
399 p += sprintf(p, "Operation Mode: %s \t \t \t %s \n",
400 (reg & 0x01) ? "Native" : "Compatible",
401 (reg & 0x04) ? "Native" : "Compatible");
402
403 /* 80-pin cable ? */
404 if (chipset_family >= ATA_133) {
405 p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
406 (reg2 & 0x01) ? cable_type[1] : cable_type[0],
407 (reg3 & 0x01) ? cable_type[1] : cable_type[0]);
408 } else if (chipset_family > ATA_33) {
409 pci_read_config_byte(bmide_dev, 0x48, &reg);
410 p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
411 (reg & 0x10) ? cable_type[1] : cable_type[0],
412 (reg & 0x20) ? cable_type[1] : cable_type[0]);
413 }
414
415 /* Prefetch Count */
416 if (chipset_family < ATA_133) {
417 pci_read_config_word(bmide_dev, 0x4c, &reg2);
418 pci_read_config_word(bmide_dev, 0x4e, &reg3);
419 p += sprintf(p, "Prefetch Count: %d \t \t \t \t %d\n",
420 reg2, reg3);
421 }
422
423 p = get_masters_info(p);
424 p = get_slaves_info(p);
425
426 len = (p - buffer) - offset;
427 *addr = buffer + offset;
428
429 return len > count ? count : len;
430 }
431 #endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
432
433 /*
434 * Configuration functions
435 */
436 /* Enables per-drive prefetch and postwrite */
437 static void config_drive_art_rwp (ide_drive_t *drive)
438 {
439 ide_hwif_t *hwif = HWIF(drive);
440 struct pci_dev *dev = hwif->pci_dev;
441
442 u8 reg4bh = 0;
443 u8 rw_prefetch = (0x11 << drive->dn);
444
445 if (drive->media != ide_disk)
446 return;
447 pci_read_config_byte(dev, 0x4b, &reg4bh);
448
449 if ((reg4bh & rw_prefetch) != rw_prefetch)
450 pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
451 }
452
453 /* Set per-drive active and recovery time */
454 static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
455 {
456 ide_hwif_t *hwif = HWIF(drive);
457 struct pci_dev *dev = hwif->pci_dev;
458
459 u8 drive_pci, test1, test2;
460
461 config_drive_art_rwp(drive);
462
463 /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
464 drive_pci = 0x40;
465 /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */
466 if (chipset_family >= ATA_133) {
467 u32 reg54h;
468 pci_read_config_dword(dev, 0x54, &reg54h);
469 if (reg54h & 0x40000000) drive_pci = 0x70;
470 drive_pci += ((drive->dn)*0x4);
471 } else {
472 drive_pci += ((drive->dn)*0x2);
473 }
474
475 /* register layout changed with newer ATA100 chips */
476 if (chipset_family < ATA_100) {
477 pci_read_config_byte(dev, drive_pci, &test1);
478 pci_read_config_byte(dev, drive_pci+1, &test2);
479
480 /* Clear active and recovery timings */
481 test1 &= ~0x0F;
482 test2 &= ~0x07;
483
484 switch(pio) {
485 case 4: test1 |= 0x01; test2 |= 0x03; break;
486 case 3: test1 |= 0x03; test2 |= 0x03; break;
487 case 2: test1 |= 0x04; test2 |= 0x04; break;
488 case 1: test1 |= 0x07; test2 |= 0x06; break;
489 case 0: /* PIO0: register setting == X000 */
490 default: break;
491 }
492 pci_write_config_byte(dev, drive_pci, test1);
493 pci_write_config_byte(dev, drive_pci+1, test2);
494 } else if (chipset_family < ATA_133) {
495 switch(pio) { /* active recovery
496 v v */
497 case 4: test1 = 0x30|0x01; break;
498 case 3: test1 = 0x30|0x03; break;
499 case 2: test1 = 0x40|0x04; break;
500 case 1: test1 = 0x60|0x07; break;
501 case 0: test1 = 0x00; break;
502 default: break;
503 }
504 pci_write_config_byte(dev, drive_pci, test1);
505 } else { /* ATA_133 */
506 u32 test3;
507 pci_read_config_dword(dev, drive_pci, &test3);
508 test3 &= 0xc0c00fff;
509 if (test3 & 0x08) {
510 test3 |= ini_time_value[ATA_133][pio] << 12;
511 test3 |= act_time_value[ATA_133][pio] << 16;
512 test3 |= rco_time_value[ATA_133][pio] << 24;
513 } else {
514 test3 |= ini_time_value[ATA_100][pio] << 12;
515 test3 |= act_time_value[ATA_100][pio] << 16;
516 test3 |= rco_time_value[ATA_100][pio] << 24;
517 }
518 pci_write_config_dword(dev, drive_pci, test3);
519 }
520 }
521
522 static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
523 {
524 pio = ide_get_best_pio_mode(drive, pio, 4);
525 config_art_rwp_pio(drive, pio);
526 return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
527 }
528
529 static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
530 {
531 (void)sis5513_tune_drive(drive, pio);
532 }
533
534 static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed)
535 {
536 ide_hwif_t *hwif = HWIF(drive);
537 struct pci_dev *dev = hwif->pci_dev;
538 u32 regdw;
539 u8 drive_pci, reg;
540
541 /* See config_art_rwp_pio for drive pci config registers */
542 drive_pci = 0x40;
543 if (chipset_family >= ATA_133) {
544 u32 reg54h;
545 pci_read_config_dword(dev, 0x54, &reg54h);
546 if (reg54h & 0x40000000) drive_pci = 0x70;
547 drive_pci += ((drive->dn)*0x4);
548 pci_read_config_dword(dev, (unsigned long)drive_pci, &regdw);
549 /* Disable UDMA bit for non UDMA modes on UDMA chips */
550 if (speed < XFER_UDMA_0) {
551 regdw &= 0xfffffffb;
552 pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
553 }
554
555 } else {
556 drive_pci += ((drive->dn)*0x2);
557 pci_read_config_byte(dev, drive_pci+1, &reg);
558 /* Disable UDMA bit for non UDMA modes on UDMA chips */
559 if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) {
560 reg &= 0x7F;
561 pci_write_config_byte(dev, drive_pci+1, reg);
562 }
563 }
564
565 /* Config chip for mode */
566 switch(speed) {
567 case XFER_UDMA_6:
568 case XFER_UDMA_5:
569 case XFER_UDMA_4:
570 case XFER_UDMA_3:
571 case XFER_UDMA_2:
572 case XFER_UDMA_1:
573 case XFER_UDMA_0:
574 if (chipset_family >= ATA_133) {
575 regdw |= 0x04;
576 regdw &= 0xfffff00f;
577 /* check if ATA133 enable */
578 if (regdw & 0x08) {
579 regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
580 regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
581 } else {
582 regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
583 regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
584 }
585 pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
586 } else {
587 /* Force the UDMA bit on if we want to use UDMA */
588 reg |= 0x80;
589 /* clean reg cycle time bits */
590 reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
591 << cycle_time_offset[chipset_family]);
592 /* set reg cycle time bits */
593 reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
594 << cycle_time_offset[chipset_family];
595 pci_write_config_byte(dev, drive_pci+1, reg);
596 }
597 break;
598 case XFER_MW_DMA_2:
599 case XFER_MW_DMA_1:
600 case XFER_MW_DMA_0:
601 case XFER_SW_DMA_2:
602 case XFER_SW_DMA_1:
603 case XFER_SW_DMA_0:
604 break;
605 case XFER_PIO_4:
606 case XFER_PIO_3:
607 case XFER_PIO_2:
608 case XFER_PIO_1:
609 case XFER_PIO_0:
610 return sis5513_tune_drive(drive, speed - XFER_PIO_0);
611 default:
612 BUG();
613 break;
614 }
615
616 return ide_config_drive_speed(drive, speed);
617 }
618
619 static int sis5513_config_xfer_rate(ide_drive_t *drive)
620 {
621 /*
622 * TODO: always set PIO mode and remove this
623 */
624 sis5513_tuneproc(drive, 255);
625
626 drive->init_speed = 0;
627
628 if (ide_tune_dma(drive))
629 return 0;
630
631 if (ide_use_fast_pio(drive))
632 sis5513_tuneproc(drive, 255);
633
634 return -1;
635 }
636
637 static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
638 {
639 struct pci_dev *dev = drive->hwif->pci_dev;
640 int drive_pci;
641 u32 reg54 = 0, regdw = 0;
642
643 pci_read_config_dword(dev, 0x54, &reg54);
644 drive_pci = ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
645 pci_read_config_dword(dev, drive_pci, &regdw);
646
647 /* if ATA133 disable, we should not set speed above UDMA5 */
648 return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
649 }
650
651 /* Chip detection and general config */
652 static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
653 {
654 struct pci_dev *host;
655 int i = 0;
656
657 chipset_family = 0;
658
659 for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
660
661 host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
662
663 if (!host)
664 continue;
665
666 chipset_family = SiSHostChipInfo[i].chipset_family;
667
668 /* Special case for SiS630 : 630S/ET is ATA_100a */
669 if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
670 if (host->revision >= 0x30)
671 chipset_family = ATA_100a;
672 }
673 pci_dev_put(host);
674
675 printk(KERN_INFO "SIS5513: %s %s controller\n",
676 SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
677 }
678
679 if (!chipset_family) { /* Belongs to pci-quirks */
680
681 u32 idemisc;
682 u16 trueid;
683
684 /* Disable ID masking and register remapping */
685 pci_read_config_dword(dev, 0x54, &idemisc);
686 pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
687 pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
688 pci_write_config_dword(dev, 0x54, idemisc);
689
690 if (trueid == 0x5518) {
691 printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
692 chipset_family = ATA_133;
693
694 /* Check for 5513 compability mapping
695 * We must use this, else the port enabled code will fail,
696 * as it expects the enablebits at 0x4a.
697 */
698 if ((idemisc & 0x40000000) == 0) {
699 pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
700 printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
701 }
702 }
703 }
704
705 if (!chipset_family) { /* Belongs to pci-quirks */
706
707 struct pci_dev *lpc_bridge;
708 u16 trueid;
709 u8 prefctl;
710 u8 idecfg;
711
712 pci_read_config_byte(dev, 0x4a, &idecfg);
713 pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
714 pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
715 pci_write_config_byte(dev, 0x4a, idecfg);
716
717 if (trueid == 0x5517) { /* SiS 961/961B */
718
719 lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
720 pci_read_config_byte(dev, 0x49, &prefctl);
721 pci_dev_put(lpc_bridge);
722
723 if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
724 printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
725 chipset_family = ATA_133a;
726 } else {
727 printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
728 chipset_family = ATA_100;
729 }
730 }
731 }
732
733 if (!chipset_family)
734 return -1;
735
736 /* Make general config ops here
737 1/ tell IDE channels to operate in Compatibility mode only
738 2/ tell old chips to allow per drive IDE timings */
739
740 {
741 u8 reg;
742 u16 regw;
743
744 switch(chipset_family) {
745 case ATA_133:
746 /* SiS962 operation mode */
747 pci_read_config_word(dev, 0x50, &regw);
748 if (regw & 0x08)
749 pci_write_config_word(dev, 0x50, regw&0xfff7);
750 pci_read_config_word(dev, 0x52, &regw);
751 if (regw & 0x08)
752 pci_write_config_word(dev, 0x52, regw&0xfff7);
753 break;
754 case ATA_133a:
755 case ATA_100:
756 /* Fixup latency */
757 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
758 /* Set compatibility bit */
759 pci_read_config_byte(dev, 0x49, &reg);
760 if (!(reg & 0x01)) {
761 pci_write_config_byte(dev, 0x49, reg|0x01);
762 }
763 break;
764 case ATA_100a:
765 case ATA_66:
766 /* Fixup latency */
767 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
768
769 /* On ATA_66 chips the bit was elsewhere */
770 pci_read_config_byte(dev, 0x52, &reg);
771 if (!(reg & 0x04)) {
772 pci_write_config_byte(dev, 0x52, reg|0x04);
773 }
774 break;
775 case ATA_33:
776 /* On ATA_33 we didn't have a single bit to set */
777 pci_read_config_byte(dev, 0x09, &reg);
778 if ((reg & 0x0f) != 0x00) {
779 pci_write_config_byte(dev, 0x09, reg&0xf0);
780 }
781 case ATA_16:
782 /* force per drive recovery and active timings
783 needed on ATA_33 and below chips */
784 pci_read_config_byte(dev, 0x52, &reg);
785 if (!(reg & 0x08)) {
786 pci_write_config_byte(dev, 0x52, reg|0x08);
787 }
788 break;
789 }
790
791 #if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
792 if (!sis_proc) {
793 sis_proc = 1;
794 bmide_dev = dev;
795 ide_pci_create_host_proc("sis", sis_get_info);
796 }
797 #endif
798 }
799
800 return 0;
801 }
802
803 struct sis_laptop {
804 u16 device;
805 u16 subvendor;
806 u16 subdevice;
807 };
808
809 static const struct sis_laptop sis_laptop[] = {
810 /* devid, subvendor, subdev */
811 { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
812 { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
813 /* end marker */
814 { 0, }
815 };
816
817 static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
818 {
819 struct pci_dev *pdev = hwif->pci_dev;
820 const struct sis_laptop *lap = &sis_laptop[0];
821 u8 ata66 = 0;
822
823 while (lap->device) {
824 if (lap->device == pdev->device &&
825 lap->subvendor == pdev->subsystem_vendor &&
826 lap->subdevice == pdev->subsystem_device)
827 return ATA_CBL_PATA40_SHORT;
828 lap++;
829 }
830
831 if (chipset_family >= ATA_133) {
832 u16 regw = 0;
833 u16 reg_addr = hwif->channel ? 0x52: 0x50;
834 pci_read_config_word(hwif->pci_dev, reg_addr, &regw);
835 ata66 = (regw & 0x8000) ? 0 : 1;
836 } else if (chipset_family >= ATA_66) {
837 u8 reg48h = 0;
838 u8 mask = hwif->channel ? 0x20 : 0x10;
839 pci_read_config_byte(hwif->pci_dev, 0x48, &reg48h);
840 ata66 = (reg48h & mask) ? 0 : 1;
841 }
842
843 return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
844 }
845
846 static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
847 {
848 u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
849
850 hwif->autodma = 0;
851
852 if (!hwif->irq)
853 hwif->irq = hwif->channel ? 15 : 14;
854
855 hwif->tuneproc = &sis5513_tuneproc;
856 hwif->speedproc = &sis5513_tune_chipset;
857
858 if (chipset_family >= ATA_133)
859 hwif->udma_filter = sis5513_ata133_udma_filter;
860
861 if (!(hwif->dma_base)) {
862 hwif->drives[0].autotune = 1;
863 hwif->drives[1].autotune = 1;
864 return;
865 }
866
867 hwif->atapi_dma = 1;
868
869 hwif->ultra_mask = udma_rates[chipset_family];
870 hwif->mwdma_mask = 0x07;
871 hwif->swdma_mask = 0x07;
872
873 if (!chipset_family)
874 return;
875
876 if (hwif->cbl != ATA_CBL_PATA40_SHORT)
877 hwif->cbl = ata66_sis5513(hwif);
878
879 if (chipset_family > ATA_16) {
880 hwif->ide_dma_check = &sis5513_config_xfer_rate;
881 if (!noautodma)
882 hwif->autodma = 1;
883 }
884 hwif->drives[0].autodma = hwif->autodma;
885 hwif->drives[1].autodma = hwif->autodma;
886 return;
887 }
888
889 static ide_pci_device_t sis5513_chipset __devinitdata = {
890 .name = "SIS5513",
891 .init_chipset = init_chipset_sis5513,
892 .init_hwif = init_hwif_sis5513,
893 .autodma = NOAUTODMA,
894 .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
895 .bootable = ON_BOARD,
896 .pio_mask = ATA_PIO4,
897 };
898
899 static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
900 {
901 return ide_setup_pci_device(dev, &sis5513_chipset);
902 }
903
904 static struct pci_device_id sis5513_pci_tbl[] = {
905 { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
906 { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
907 { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_1180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
908 { 0, },
909 };
910 MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
911
912 static struct pci_driver driver = {
913 .name = "SIS_IDE",
914 .id_table = sis5513_pci_tbl,
915 .probe = sis5513_init_one,
916 };
917
918 static int __init sis5513_ide_init(void)
919 {
920 return ide_pci_register_driver(&driver);
921 }
922
923 module_init(sis5513_ide_init);
924
925 MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
926 MODULE_DESCRIPTION("PCI driver module for SIS IDE");
927 MODULE_LICENSE("GPL");
928
929 /*
930 * TODO:
931 * - CLEANUP
932 * - Use drivers/ide/ide-timing.h !
933 * - More checks in the config registers (force values instead of
934 * relying on the BIOS setting them correctly).
935 * - Further optimisations ?
936 * . for example ATA66+ regs 0x48 & 0x4A
937 */
Linux kernel - Deliverables
This page took 0.065233 seconds and 5 git commands to generate.