2 * Support for IDE interfaces on PowerMacs.
4 * These IDE interfaces are memory-mapped and have a DBDMA channel
7 * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
8 * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
15 * Some code taken from drivers/ide/ide-dma.c:
17 * Copyright (c) 1995-1998 Mark Lord
19 * TODO: - Use pre-calculated (kauai) timing tables all the time and
20 * get rid of the "rounded" tables used previously, so we have the
21 * same table format for all controllers and can then just have one
25 #include <linux/types.h>
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/delay.h>
29 #include <linux/ide.h>
30 #include <linux/notifier.h>
31 #include <linux/reboot.h>
32 #include <linux/pci.h>
33 #include <linux/adb.h>
34 #include <linux/pmu.h>
35 #include <linux/scatterlist.h>
39 #include <asm/dbdma.h>
41 #include <asm/pci-bridge.h>
42 #include <asm/machdep.h>
43 #include <asm/pmac_feature.h>
44 #include <asm/sections.h>
48 #include <asm/mediabay.h>
51 #define DRV_NAME "ide-pmac"
55 #define DMA_WAIT_TIMEOUT 50
57 typedef struct pmac_ide_hwif
{
58 unsigned long regbase
;
62 unsigned mediabay
: 1;
63 unsigned broken_dma
: 1;
64 unsigned broken_dma_warn
: 1;
65 struct device_node
* node
;
66 struct macio_dev
*mdev
;
68 volatile u32 __iomem
* *kauai_fcr
;
69 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
70 /* Those fields are duplicating what is in hwif. We currently
71 * can't use the hwif ones because of some assumptions that are
72 * beeing done by the generic code about the kind of dma controller
73 * and format of the dma table. This will have to be fixed though.
75 volatile struct dbdma_regs __iomem
* dma_regs
;
76 struct dbdma_cmd
* dma_table_cpu
;
82 controller_ohare
, /* OHare based */
83 controller_heathrow
, /* Heathrow/Paddington */
84 controller_kl_ata3
, /* KeyLargo ATA-3 */
85 controller_kl_ata4
, /* KeyLargo ATA-4 */
86 controller_un_ata6
, /* UniNorth2 ATA-6 */
87 controller_k2_ata6
, /* K2 ATA-6 */
88 controller_sh_ata6
, /* Shasta ATA-6 */
91 static const char* model_name
[] = {
92 "OHare ATA", /* OHare based */
93 "Heathrow ATA", /* Heathrow/Paddington */
94 "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
95 "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
96 "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
97 "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
98 "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
102 * Extra registers, both 32-bit little-endian
104 #define IDE_TIMING_CONFIG 0x200
105 #define IDE_INTERRUPT 0x300
107 /* Kauai (U2) ATA has different register setup */
108 #define IDE_KAUAI_PIO_CONFIG 0x200
109 #define IDE_KAUAI_ULTRA_CONFIG 0x210
110 #define IDE_KAUAI_POLL_CONFIG 0x220
113 * Timing configuration register definitions
116 /* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
117 #define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
118 #define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
119 #define IDE_SYSCLK_NS 30 /* 33Mhz cell */
120 #define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
122 /* 133Mhz cell, found in shasta.
123 * See comments about 100 Mhz Uninorth 2...
124 * Note that PIO_MASK and MDMA_MASK seem to overlap
126 #define TR_133_PIOREG_PIO_MASK 0xff000fff
127 #define TR_133_PIOREG_MDMA_MASK 0x00fff800
128 #define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
129 #define TR_133_UDMAREG_UDMA_EN 0x00000001
131 /* 100Mhz cell, found in Uninorth 2. I don't have much infos about
132 * this one yet, it appears as a pci device (106b/0033) on uninorth
133 * internal PCI bus and it's clock is controlled like gem or fw. It
134 * appears to be an evolution of keylargo ATA4 with a timing register
135 * extended to 2 32bits registers and a similar DBDMA channel. Other
136 * registers seem to exist but I can't tell much about them.
138 * So far, I'm using pre-calculated tables for this extracted from
139 * the values used by the MacOS X driver.
141 * The "PIO" register controls PIO and MDMA timings, the "ULTRA"
142 * register controls the UDMA timings. At least, it seems bit 0
143 * of this one enables UDMA vs. MDMA, and bits 4..7 are the
144 * cycle time in units of 10ns. Bits 8..15 are used by I don't
145 * know their meaning yet
147 #define TR_100_PIOREG_PIO_MASK 0xff000fff
148 #define TR_100_PIOREG_MDMA_MASK 0x00fff000
149 #define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
150 #define TR_100_UDMAREG_UDMA_EN 0x00000001
153 /* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
154 * 40 connector cable and to 4 on 80 connector one.
155 * Clock unit is 15ns (66Mhz)
157 * 3 Values can be programmed:
158 * - Write data setup, which appears to match the cycle time. They
159 * also call it DIOW setup.
160 * - Ready to pause time (from spec)
161 * - Address setup. That one is weird. I don't see where exactly
162 * it fits in UDMA cycles, I got it's name from an obscure piece
163 * of commented out code in Darwin. They leave it to 0, we do as
164 * well, despite a comment that would lead to think it has a
166 * Apple also add 60ns to the write data setup (or cycle time ?) on
169 #define TR_66_UDMA_MASK 0xfff00000
170 #define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
171 #define TR_66_UDMA_ADDRSETUP_MASK 0xe0000000 /* Address setup */
172 #define TR_66_UDMA_ADDRSETUP_SHIFT 29
173 #define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
174 #define TR_66_UDMA_RDY2PAUS_SHIFT 25
175 #define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
176 #define TR_66_UDMA_WRDATASETUP_SHIFT 21
177 #define TR_66_MDMA_MASK 0x000ffc00
178 #define TR_66_MDMA_RECOVERY_MASK 0x000f8000
179 #define TR_66_MDMA_RECOVERY_SHIFT 15
180 #define TR_66_MDMA_ACCESS_MASK 0x00007c00
181 #define TR_66_MDMA_ACCESS_SHIFT 10
182 #define TR_66_PIO_MASK 0x000003ff
183 #define TR_66_PIO_RECOVERY_MASK 0x000003e0
184 #define TR_66_PIO_RECOVERY_SHIFT 5
185 #define TR_66_PIO_ACCESS_MASK 0x0000001f
186 #define TR_66_PIO_ACCESS_SHIFT 0
188 /* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
189 * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
191 * The access time and recovery time can be programmed. Some older
192 * Darwin code base limit OHare to 150ns cycle time. I decided to do
193 * the same here fore safety against broken old hardware ;)
194 * The HalfTick bit, when set, adds half a clock (15ns) to the access
195 * time and removes one from recovery. It's not supported on KeyLargo
196 * implementation afaik. The E bit appears to be set for PIO mode 0 and
197 * is used to reach long timings used in this mode.
199 #define TR_33_MDMA_MASK 0x003ff800
200 #define TR_33_MDMA_RECOVERY_MASK 0x001f0000
201 #define TR_33_MDMA_RECOVERY_SHIFT 16
202 #define TR_33_MDMA_ACCESS_MASK 0x0000f800
203 #define TR_33_MDMA_ACCESS_SHIFT 11
204 #define TR_33_MDMA_HALFTICK 0x00200000
205 #define TR_33_PIO_MASK 0x000007ff
206 #define TR_33_PIO_E 0x00000400
207 #define TR_33_PIO_RECOVERY_MASK 0x000003e0
208 #define TR_33_PIO_RECOVERY_SHIFT 5
209 #define TR_33_PIO_ACCESS_MASK 0x0000001f
210 #define TR_33_PIO_ACCESS_SHIFT 0
213 * Interrupt register definitions
215 #define IDE_INTR_DMA 0x80000000
216 #define IDE_INTR_DEVICE 0x40000000
219 * FCR Register on Kauai. Not sure what bit 0x4 is ...
221 #define KAUAI_FCR_UATA_MAGIC 0x00000004
222 #define KAUAI_FCR_UATA_RESET_N 0x00000002
223 #define KAUAI_FCR_UATA_ENABLE 0x00000001
225 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
227 /* Rounded Multiword DMA timings
229 * I gave up finding a generic formula for all controller
230 * types and instead, built tables based on timing values
231 * used by Apple in Darwin's implementation.
233 struct mdma_timings_t
{
239 struct mdma_timings_t mdma_timings_33
[] =
252 struct mdma_timings_t mdma_timings_33k
[] =
265 struct mdma_timings_t mdma_timings_66
[] =
278 /* KeyLargo ATA-4 Ultra DMA timings (rounded) */
280 int addrSetup
; /* ??? */
283 } kl66_udma_timings
[] =
285 { 0, 180, 120 }, /* Mode 0 */
286 { 0, 150, 90 }, /* 1 */
287 { 0, 120, 60 }, /* 2 */
288 { 0, 90, 45 }, /* 3 */
289 { 0, 90, 30 } /* 4 */
292 /* UniNorth 2 ATA/100 timings */
293 struct kauai_timing
{
298 static struct kauai_timing kauai_pio_timings
[] =
300 { 930 , 0x08000fff },
301 { 600 , 0x08000a92 },
302 { 383 , 0x0800060f },
303 { 360 , 0x08000492 },
304 { 330 , 0x0800048f },
305 { 300 , 0x080003cf },
306 { 270 , 0x080003cc },
307 { 240 , 0x0800038b },
308 { 239 , 0x0800030c },
309 { 180 , 0x05000249 },
310 { 120 , 0x04000148 },
314 static struct kauai_timing kauai_mdma_timings
[] =
316 { 1260 , 0x00fff000 },
317 { 480 , 0x00618000 },
318 { 360 , 0x00492000 },
319 { 270 , 0x0038e000 },
320 { 240 , 0x0030c000 },
321 { 210 , 0x002cb000 },
322 { 180 , 0x00249000 },
323 { 150 , 0x00209000 },
324 { 120 , 0x00148000 },
328 static struct kauai_timing kauai_udma_timings
[] =
330 { 120 , 0x000070c0 },
339 static struct kauai_timing shasta_pio_timings
[] =
341 { 930 , 0x08000fff },
342 { 600 , 0x0A000c97 },
343 { 383 , 0x07000712 },
344 { 360 , 0x040003cd },
345 { 330 , 0x040003cd },
346 { 300 , 0x040003cd },
347 { 270 , 0x040003cd },
348 { 240 , 0x040003cd },
349 { 239 , 0x040003cd },
350 { 180 , 0x0400028b },
351 { 120 , 0x0400010a },
355 static struct kauai_timing shasta_mdma_timings
[] =
357 { 1260 , 0x00fff000 },
358 { 480 , 0x00820800 },
359 { 360 , 0x00820800 },
360 { 270 , 0x00820800 },
361 { 240 , 0x00820800 },
362 { 210 , 0x00820800 },
363 { 180 , 0x00820800 },
364 { 150 , 0x0028b000 },
365 { 120 , 0x001ca000 },
369 static struct kauai_timing shasta_udma133_timings
[] =
371 { 120 , 0x00035901, },
372 { 90 , 0x000348b1, },
373 { 60 , 0x00033881, },
374 { 45 , 0x00033861, },
375 { 30 , 0x00033841, },
376 { 20 , 0x00033031, },
377 { 15 , 0x00033021, },
383 kauai_lookup_timing(struct kauai_timing
* table
, int cycle_time
)
387 for (i
=0; table
[i
].cycle_time
; i
++)
388 if (cycle_time
> table
[i
+1].cycle_time
)
389 return table
[i
].timing_reg
;
394 /* allow up to 256 DBDMA commands per xfer */
395 #define MAX_DCMDS 256
398 * Wait 1s for disk to answer on IDE bus after a hard reset
399 * of the device (via GPIO/FCR).
401 * Some devices seem to "pollute" the bus even after dropping
402 * the BSY bit (typically some combo drives slave on the UDMA
403 * bus) after a hard reset. Since we hard reset all drives on
404 * KeyLargo ATA66, we have to keep that delay around. I may end
405 * up not hard resetting anymore on these and keep the delay only
406 * for older interfaces instead (we have to reset when coming
407 * from MacOS...) --BenH.
409 #define IDE_WAKEUP_DELAY (1*HZ)
411 static int pmac_ide_init_dma(ide_hwif_t
*, const struct ide_port_info
*);
412 static int pmac_ide_build_dmatable(ide_drive_t
*drive
, struct request
*rq
);
413 static void pmac_ide_selectproc(ide_drive_t
*drive
);
414 static void pmac_ide_kauai_selectproc(ide_drive_t
*drive
);
416 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
418 #define PMAC_IDE_REG(x) \
419 ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
422 * Apply the timings of the proper unit (master/slave) to the shared
423 * timing register when selecting that unit. This version is for
424 * ASICs with a single timing register
427 pmac_ide_selectproc(ide_drive_t
*drive
)
429 ide_hwif_t
*hwif
= drive
->hwif
;
430 pmac_ide_hwif_t
*pmif
=
431 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
436 if (drive
->select
.b
.unit
& 0x01)
437 writel(pmif
->timings
[1], PMAC_IDE_REG(IDE_TIMING_CONFIG
));
439 writel(pmif
->timings
[0], PMAC_IDE_REG(IDE_TIMING_CONFIG
));
440 (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG
));
444 * Apply the timings of the proper unit (master/slave) to the shared
445 * timing register when selecting that unit. This version is for
446 * ASICs with a dual timing register (Kauai)
449 pmac_ide_kauai_selectproc(ide_drive_t
*drive
)
451 ide_hwif_t
*hwif
= drive
->hwif
;
452 pmac_ide_hwif_t
*pmif
=
453 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
458 if (drive
->select
.b
.unit
& 0x01) {
459 writel(pmif
->timings
[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG
));
460 writel(pmif
->timings
[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG
));
462 writel(pmif
->timings
[0], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG
));
463 writel(pmif
->timings
[2], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG
));
465 (void)readl(PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG
));
469 * Force an update of controller timing values for a given drive
472 pmac_ide_do_update_timings(ide_drive_t
*drive
)
474 ide_hwif_t
*hwif
= drive
->hwif
;
475 pmac_ide_hwif_t
*pmif
=
476 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
481 if (pmif
->kind
== controller_sh_ata6
||
482 pmif
->kind
== controller_un_ata6
||
483 pmif
->kind
== controller_k2_ata6
)
484 pmac_ide_kauai_selectproc(drive
);
486 pmac_ide_selectproc(drive
);
489 static void pmac_exec_command(ide_hwif_t
*hwif
, u8 cmd
)
491 writeb(cmd
, (void __iomem
*)hwif
->io_ports
.command_addr
);
492 (void)readl((void __iomem
*)(hwif
->io_ports
.data_addr
493 + IDE_TIMING_CONFIG
));
496 static void pmac_set_irq(ide_hwif_t
*hwif
, int on
)
498 u8 ctl
= ATA_DEVCTL_OBS
;
500 if (on
== 4) { /* hack for SRST */
507 writeb(ctl
, (void __iomem
*)hwif
->io_ports
.ctl_addr
);
508 (void)readl((void __iomem
*)(hwif
->io_ports
.data_addr
509 + IDE_TIMING_CONFIG
));
513 * Old tuning functions (called on hdparm -p), sets up drive PIO timings
516 pmac_ide_set_pio_mode(ide_drive_t
*drive
, const u8 pio
)
518 ide_hwif_t
*hwif
= drive
->hwif
;
519 pmac_ide_hwif_t
*pmif
=
520 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
521 struct ide_timing
*tim
= ide_timing_find_mode(XFER_PIO_0
+ pio
);
523 unsigned accessTicks
, recTicks
;
524 unsigned accessTime
, recTime
;
525 unsigned int cycle_time
;
530 /* which drive is it ? */
531 timings
= &pmif
->timings
[drive
->select
.b
.unit
& 0x01];
534 cycle_time
= ide_pio_cycle_time(drive
, pio
);
536 switch (pmif
->kind
) {
537 case controller_sh_ata6
: {
539 u32 tr
= kauai_lookup_timing(shasta_pio_timings
, cycle_time
);
540 t
= (t
& ~TR_133_PIOREG_PIO_MASK
) | tr
;
543 case controller_un_ata6
:
544 case controller_k2_ata6
: {
546 u32 tr
= kauai_lookup_timing(kauai_pio_timings
, cycle_time
);
547 t
= (t
& ~TR_100_PIOREG_PIO_MASK
) | tr
;
550 case controller_kl_ata4
:
552 recTime
= cycle_time
- tim
->active
- tim
->setup
;
553 recTime
= max(recTime
, 150U);
554 accessTime
= tim
->active
;
555 accessTime
= max(accessTime
, 150U);
556 accessTicks
= SYSCLK_TICKS_66(accessTime
);
557 accessTicks
= min(accessTicks
, 0x1fU
);
558 recTicks
= SYSCLK_TICKS_66(recTime
);
559 recTicks
= min(recTicks
, 0x1fU
);
560 t
= (t
& ~TR_66_PIO_MASK
) |
561 (accessTicks
<< TR_66_PIO_ACCESS_SHIFT
) |
562 (recTicks
<< TR_66_PIO_RECOVERY_SHIFT
);
567 recTime
= cycle_time
- tim
->active
- tim
->setup
;
568 recTime
= max(recTime
, 150U);
569 accessTime
= tim
->active
;
570 accessTime
= max(accessTime
, 150U);
571 accessTicks
= SYSCLK_TICKS(accessTime
);
572 accessTicks
= min(accessTicks
, 0x1fU
);
573 accessTicks
= max(accessTicks
, 4U);
574 recTicks
= SYSCLK_TICKS(recTime
);
575 recTicks
= min(recTicks
, 0x1fU
);
576 recTicks
= max(recTicks
, 5U) - 4;
578 recTicks
--; /* guess, but it's only for PIO0, so... */
581 t
= (t
& ~TR_33_PIO_MASK
) |
582 (accessTicks
<< TR_33_PIO_ACCESS_SHIFT
) |
583 (recTicks
<< TR_33_PIO_RECOVERY_SHIFT
);
590 #ifdef IDE_PMAC_DEBUG
591 printk(KERN_ERR
"%s: Set PIO timing for mode %d, reg: 0x%08x\n",
592 drive
->name
, pio
, *timings
);
596 pmac_ide_do_update_timings(drive
);
599 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
602 * Calculate KeyLargo ATA/66 UDMA timings
605 set_timings_udma_ata4(u32
*timings
, u8 speed
)
607 unsigned rdyToPauseTicks
, wrDataSetupTicks
, addrTicks
;
609 if (speed
> XFER_UDMA_4
)
612 rdyToPauseTicks
= SYSCLK_TICKS_66(kl66_udma_timings
[speed
& 0xf].rdy2pause
);
613 wrDataSetupTicks
= SYSCLK_TICKS_66(kl66_udma_timings
[speed
& 0xf].wrDataSetup
);
614 addrTicks
= SYSCLK_TICKS_66(kl66_udma_timings
[speed
& 0xf].addrSetup
);
616 *timings
= ((*timings
) & ~(TR_66_UDMA_MASK
| TR_66_MDMA_MASK
)) |
617 (wrDataSetupTicks
<< TR_66_UDMA_WRDATASETUP_SHIFT
) |
618 (rdyToPauseTicks
<< TR_66_UDMA_RDY2PAUS_SHIFT
) |
619 (addrTicks
<<TR_66_UDMA_ADDRSETUP_SHIFT
) |
621 #ifdef IDE_PMAC_DEBUG
622 printk(KERN_ERR
"ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n",
623 speed
& 0xf, *timings
);
630 * Calculate Kauai ATA/100 UDMA timings
633 set_timings_udma_ata6(u32
*pio_timings
, u32
*ultra_timings
, u8 speed
)
635 struct ide_timing
*t
= ide_timing_find_mode(speed
);
638 if (speed
> XFER_UDMA_5
|| t
== NULL
)
640 tr
= kauai_lookup_timing(kauai_udma_timings
, (int)t
->udma
);
641 *ultra_timings
= ((*ultra_timings
) & ~TR_100_UDMAREG_UDMA_MASK
) | tr
;
642 *ultra_timings
= (*ultra_timings
) | TR_100_UDMAREG_UDMA_EN
;
648 * Calculate Shasta ATA/133 UDMA timings
651 set_timings_udma_shasta(u32
*pio_timings
, u32
*ultra_timings
, u8 speed
)
653 struct ide_timing
*t
= ide_timing_find_mode(speed
);
656 if (speed
> XFER_UDMA_6
|| t
== NULL
)
658 tr
= kauai_lookup_timing(shasta_udma133_timings
, (int)t
->udma
);
659 *ultra_timings
= ((*ultra_timings
) & ~TR_133_UDMAREG_UDMA_MASK
) | tr
;
660 *ultra_timings
= (*ultra_timings
) | TR_133_UDMAREG_UDMA_EN
;
666 * Calculate MDMA timings for all cells
669 set_timings_mdma(ide_drive_t
*drive
, int intf_type
, u32
*timings
, u32
*timings2
,
672 int cycleTime
, accessTime
= 0, recTime
= 0;
673 unsigned accessTicks
, recTicks
;
674 struct hd_driveid
*id
= drive
->id
;
675 struct mdma_timings_t
* tm
= NULL
;
678 /* Get default cycle time for mode */
679 switch(speed
& 0xf) {
680 case 0: cycleTime
= 480; break;
681 case 1: cycleTime
= 150; break;
682 case 2: cycleTime
= 120; break;
688 /* Check if drive provides explicit DMA cycle time */
689 if ((id
->field_valid
& 2) && id
->eide_dma_time
)
690 cycleTime
= max_t(int, id
->eide_dma_time
, cycleTime
);
692 /* OHare limits according to some old Apple sources */
693 if ((intf_type
== controller_ohare
) && (cycleTime
< 150))
695 /* Get the proper timing array for this controller */
697 case controller_sh_ata6
:
698 case controller_un_ata6
:
699 case controller_k2_ata6
:
701 case controller_kl_ata4
:
702 tm
= mdma_timings_66
;
704 case controller_kl_ata3
:
705 tm
= mdma_timings_33k
;
708 tm
= mdma_timings_33
;
712 /* Lookup matching access & recovery times */
715 if (tm
[i
+1].cycleTime
< cycleTime
)
719 cycleTime
= tm
[i
].cycleTime
;
720 accessTime
= tm
[i
].accessTime
;
721 recTime
= tm
[i
].recoveryTime
;
723 #ifdef IDE_PMAC_DEBUG
724 printk(KERN_ERR
"%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n",
725 drive
->name
, cycleTime
, accessTime
, recTime
);
729 case controller_sh_ata6
: {
731 u32 tr
= kauai_lookup_timing(shasta_mdma_timings
, cycleTime
);
732 *timings
= ((*timings
) & ~TR_133_PIOREG_MDMA_MASK
) | tr
;
733 *timings2
= (*timings2
) & ~TR_133_UDMAREG_UDMA_EN
;
735 case controller_un_ata6
:
736 case controller_k2_ata6
: {
738 u32 tr
= kauai_lookup_timing(kauai_mdma_timings
, cycleTime
);
739 *timings
= ((*timings
) & ~TR_100_PIOREG_MDMA_MASK
) | tr
;
740 *timings2
= (*timings2
) & ~TR_100_UDMAREG_UDMA_EN
;
743 case controller_kl_ata4
:
745 accessTicks
= SYSCLK_TICKS_66(accessTime
);
746 accessTicks
= min(accessTicks
, 0x1fU
);
747 accessTicks
= max(accessTicks
, 0x1U
);
748 recTicks
= SYSCLK_TICKS_66(recTime
);
749 recTicks
= min(recTicks
, 0x1fU
);
750 recTicks
= max(recTicks
, 0x3U
);
751 /* Clear out mdma bits and disable udma */
752 *timings
= ((*timings
) & ~(TR_66_MDMA_MASK
| TR_66_UDMA_MASK
)) |
753 (accessTicks
<< TR_66_MDMA_ACCESS_SHIFT
) |
754 (recTicks
<< TR_66_MDMA_RECOVERY_SHIFT
);
756 case controller_kl_ata3
:
757 /* 33Mhz cell on KeyLargo */
758 accessTicks
= SYSCLK_TICKS(accessTime
);
759 accessTicks
= max(accessTicks
, 1U);
760 accessTicks
= min(accessTicks
, 0x1fU
);
761 accessTime
= accessTicks
* IDE_SYSCLK_NS
;
762 recTicks
= SYSCLK_TICKS(recTime
);
763 recTicks
= max(recTicks
, 1U);
764 recTicks
= min(recTicks
, 0x1fU
);
765 *timings
= ((*timings
) & ~TR_33_MDMA_MASK
) |
766 (accessTicks
<< TR_33_MDMA_ACCESS_SHIFT
) |
767 (recTicks
<< TR_33_MDMA_RECOVERY_SHIFT
);
770 /* 33Mhz cell on others */
772 int origAccessTime
= accessTime
;
773 int origRecTime
= recTime
;
775 accessTicks
= SYSCLK_TICKS(accessTime
);
776 accessTicks
= max(accessTicks
, 1U);
777 accessTicks
= min(accessTicks
, 0x1fU
);
778 accessTime
= accessTicks
* IDE_SYSCLK_NS
;
779 recTicks
= SYSCLK_TICKS(recTime
);
780 recTicks
= max(recTicks
, 2U) - 1;
781 recTicks
= min(recTicks
, 0x1fU
);
782 recTime
= (recTicks
+ 1) * IDE_SYSCLK_NS
;
783 if ((accessTicks
> 1) &&
784 ((accessTime
- IDE_SYSCLK_NS
/2) >= origAccessTime
) &&
785 ((recTime
- IDE_SYSCLK_NS
/2) >= origRecTime
)) {
789 *timings
= ((*timings
) & ~TR_33_MDMA_MASK
) |
790 (accessTicks
<< TR_33_MDMA_ACCESS_SHIFT
) |
791 (recTicks
<< TR_33_MDMA_RECOVERY_SHIFT
);
793 *timings
|= TR_33_MDMA_HALFTICK
;
796 #ifdef IDE_PMAC_DEBUG
797 printk(KERN_ERR
"%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
798 drive
->name
, speed
& 0xf, *timings
);
801 #endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
803 static void pmac_ide_set_dma_mode(ide_drive_t
*drive
, const u8 speed
)
805 ide_hwif_t
*hwif
= drive
->hwif
;
806 pmac_ide_hwif_t
*pmif
=
807 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
808 int unit
= (drive
->select
.b
.unit
& 0x01);
810 u32
*timings
, *timings2
, tl
[2];
812 timings
= &pmif
->timings
[unit
];
813 timings2
= &pmif
->timings
[unit
+2];
815 /* Copy timings to local image */
819 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
820 if (speed
>= XFER_UDMA_0
) {
821 if (pmif
->kind
== controller_kl_ata4
)
822 ret
= set_timings_udma_ata4(&tl
[0], speed
);
823 else if (pmif
->kind
== controller_un_ata6
824 || pmif
->kind
== controller_k2_ata6
)
825 ret
= set_timings_udma_ata6(&tl
[0], &tl
[1], speed
);
826 else if (pmif
->kind
== controller_sh_ata6
)
827 ret
= set_timings_udma_shasta(&tl
[0], &tl
[1], speed
);
831 set_timings_mdma(drive
, pmif
->kind
, &tl
[0], &tl
[1], speed
);
832 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
836 /* Apply timings to controller */
840 pmac_ide_do_update_timings(drive
);
844 * Blast some well known "safe" values to the timing registers at init or
845 * wakeup from sleep time, before we do real calculation
848 sanitize_timings(pmac_ide_hwif_t
*pmif
)
850 unsigned int value
, value2
= 0;
853 case controller_sh_ata6
:
857 case controller_un_ata6
:
858 case controller_k2_ata6
:
862 case controller_kl_ata4
:
865 case controller_kl_ata3
:
868 case controller_heathrow
:
869 case controller_ohare
:
874 pmif
->timings
[0] = pmif
->timings
[1] = value
;
875 pmif
->timings
[2] = pmif
->timings
[3] = value2
;
878 /* Suspend call back, should be called after the child devices
879 * have actually been suspended
881 static int pmac_ide_do_suspend(pmac_ide_hwif_t
*pmif
)
883 /* We clear the timings */
884 pmif
->timings
[0] = 0;
885 pmif
->timings
[1] = 0;
887 disable_irq(pmif
->irq
);
889 /* The media bay will handle itself just fine */
893 /* Kauai has bus control FCRs directly here */
894 if (pmif
->kauai_fcr
) {
895 u32 fcr
= readl(pmif
->kauai_fcr
);
896 fcr
&= ~(KAUAI_FCR_UATA_RESET_N
| KAUAI_FCR_UATA_ENABLE
);
897 writel(fcr
, pmif
->kauai_fcr
);
900 /* Disable the bus on older machines and the cell on kauai */
901 ppc_md
.feature_call(PMAC_FTR_IDE_ENABLE
, pmif
->node
, pmif
->aapl_bus_id
,
907 /* Resume call back, should be called before the child devices
910 static int pmac_ide_do_resume(pmac_ide_hwif_t
*pmif
)
912 /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
913 if (!pmif
->mediabay
) {
914 ppc_md
.feature_call(PMAC_FTR_IDE_RESET
, pmif
->node
, pmif
->aapl_bus_id
, 1);
915 ppc_md
.feature_call(PMAC_FTR_IDE_ENABLE
, pmif
->node
, pmif
->aapl_bus_id
, 1);
917 ppc_md
.feature_call(PMAC_FTR_IDE_RESET
, pmif
->node
, pmif
->aapl_bus_id
, 0);
919 /* Kauai has it different */
920 if (pmif
->kauai_fcr
) {
921 u32 fcr
= readl(pmif
->kauai_fcr
);
922 fcr
|= KAUAI_FCR_UATA_RESET_N
| KAUAI_FCR_UATA_ENABLE
;
923 writel(fcr
, pmif
->kauai_fcr
);
926 msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY
));
929 /* Sanitize drive timings */
930 sanitize_timings(pmif
);
932 enable_irq(pmif
->irq
);
937 static u8
pmac_ide_cable_detect(ide_hwif_t
*hwif
)
939 pmac_ide_hwif_t
*pmif
=
940 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
941 struct device_node
*np
= pmif
->node
;
942 const char *cable
= of_get_property(np
, "cable-type", NULL
);
944 /* Get cable type from device-tree. */
945 if (cable
&& !strncmp(cable
, "80-", 3))
946 return ATA_CBL_PATA80
;
949 * G5's seem to have incorrect cable type in device-tree.
950 * Let's assume they have a 80 conductor cable, this seem
951 * to be always the case unless the user mucked around.
953 if (of_device_is_compatible(np
, "K2-UATA") ||
954 of_device_is_compatible(np
, "shasta-ata"))
955 return ATA_CBL_PATA80
;
957 return ATA_CBL_PATA40
;
960 static void pmac_ide_init_dev(ide_drive_t
*drive
)
962 ide_hwif_t
*hwif
= drive
->hwif
;
963 pmac_ide_hwif_t
*pmif
=
964 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
966 if (pmif
->mediabay
) {
967 #ifdef CONFIG_PMAC_MEDIABAY
968 if (check_media_bay_by_base(pmif
->regbase
, MB_CD
) == 0) {
977 static const struct ide_port_ops pmac_ide_ata6_port_ops
= {
978 .init_dev
= pmac_ide_init_dev
,
979 .set_pio_mode
= pmac_ide_set_pio_mode
,
980 .set_dma_mode
= pmac_ide_set_dma_mode
,
981 .selectproc
= pmac_ide_kauai_selectproc
,
982 .cable_detect
= pmac_ide_cable_detect
,
985 static const struct ide_port_ops pmac_ide_ata4_port_ops
= {
986 .init_dev
= pmac_ide_init_dev
,
987 .set_pio_mode
= pmac_ide_set_pio_mode
,
988 .set_dma_mode
= pmac_ide_set_dma_mode
,
989 .selectproc
= pmac_ide_selectproc
,
990 .cable_detect
= pmac_ide_cable_detect
,
993 static const struct ide_port_ops pmac_ide_port_ops
= {
994 .init_dev
= pmac_ide_init_dev
,
995 .set_pio_mode
= pmac_ide_set_pio_mode
,
996 .set_dma_mode
= pmac_ide_set_dma_mode
,
997 .selectproc
= pmac_ide_selectproc
,
1000 static const struct ide_dma_ops pmac_dma_ops
;
1002 static const struct ide_port_info pmac_port_info
= {
1004 .init_dma
= pmac_ide_init_dma
,
1005 .chipset
= ide_pmac
,
1006 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
1007 .dma_ops
= &pmac_dma_ops
,
1009 .port_ops
= &pmac_ide_port_ops
,
1010 .host_flags
= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA
|
1011 IDE_HFLAG_POST_SET_MODE
|
1013 IDE_HFLAG_UNMASK_IRQS
,
1014 .pio_mask
= ATA_PIO4
,
1015 .mwdma_mask
= ATA_MWDMA2
,
1019 * Setup, register & probe an IDE channel driven by this driver, this is
1020 * called by one of the 2 probe functions (macio or PCI).
1022 static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t
*pmif
, hw_regs_t
*hw
)
1024 struct device_node
*np
= pmif
->node
;
1027 hw_regs_t
*hws
[] = { hw
, NULL
, NULL
, NULL
};
1028 u8 idx
[4] = { 0xff, 0xff, 0xff, 0xff };
1029 struct ide_port_info d
= pmac_port_info
;
1031 pmif
->broken_dma
= pmif
->broken_dma_warn
= 0;
1032 if (of_device_is_compatible(np
, "shasta-ata")) {
1033 pmif
->kind
= controller_sh_ata6
;
1034 d
.port_ops
= &pmac_ide_ata6_port_ops
;
1035 d
.udma_mask
= ATA_UDMA6
;
1036 } else if (of_device_is_compatible(np
, "kauai-ata")) {
1037 pmif
->kind
= controller_un_ata6
;
1038 d
.port_ops
= &pmac_ide_ata6_port_ops
;
1039 d
.udma_mask
= ATA_UDMA5
;
1040 } else if (of_device_is_compatible(np
, "K2-UATA")) {
1041 pmif
->kind
= controller_k2_ata6
;
1042 d
.port_ops
= &pmac_ide_ata6_port_ops
;
1043 d
.udma_mask
= ATA_UDMA5
;
1044 } else if (of_device_is_compatible(np
, "keylargo-ata")) {
1045 if (strcmp(np
->name
, "ata-4") == 0) {
1046 pmif
->kind
= controller_kl_ata4
;
1047 d
.port_ops
= &pmac_ide_ata4_port_ops
;
1048 d
.udma_mask
= ATA_UDMA4
;
1050 pmif
->kind
= controller_kl_ata3
;
1051 } else if (of_device_is_compatible(np
, "heathrow-ata")) {
1052 pmif
->kind
= controller_heathrow
;
1054 pmif
->kind
= controller_ohare
;
1055 pmif
->broken_dma
= 1;
1058 bidp
= of_get_property(np
, "AAPL,bus-id", NULL
);
1059 pmif
->aapl_bus_id
= bidp
? *bidp
: 0;
1061 /* On Kauai-type controllers, we make sure the FCR is correct */
1062 if (pmif
->kauai_fcr
)
1063 writel(KAUAI_FCR_UATA_MAGIC
|
1064 KAUAI_FCR_UATA_RESET_N
|
1065 KAUAI_FCR_UATA_ENABLE
, pmif
->kauai_fcr
);
1069 /* Make sure we have sane timings */
1070 sanitize_timings(pmif
);
1072 #ifndef CONFIG_PPC64
1073 /* XXX FIXME: Media bay stuff need re-organizing */
1074 if (np
->parent
&& np
->parent
->name
1075 && strcasecmp(np
->parent
->name
, "media-bay") == 0) {
1076 #ifdef CONFIG_PMAC_MEDIABAY
1077 media_bay_set_ide_infos(np
->parent
, pmif
->regbase
, pmif
->irq
,
1079 #endif /* CONFIG_PMAC_MEDIABAY */
1082 pmif
->aapl_bus_id
= 1;
1083 } else if (pmif
->kind
== controller_ohare
) {
1084 /* The code below is having trouble on some ohare machines
1085 * (timing related ?). Until I can put my hand on one of these
1086 * units, I keep the old way
1088 ppc_md
.feature_call(PMAC_FTR_IDE_ENABLE
, np
, 0, 1);
1092 /* This is necessary to enable IDE when net-booting */
1093 ppc_md
.feature_call(PMAC_FTR_IDE_RESET
, np
, pmif
->aapl_bus_id
, 1);
1094 ppc_md
.feature_call(PMAC_FTR_IDE_ENABLE
, np
, pmif
->aapl_bus_id
, 1);
1096 ppc_md
.feature_call(PMAC_FTR_IDE_RESET
, np
, pmif
->aapl_bus_id
, 0);
1097 msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY
));
1100 printk(KERN_INFO DRV_NAME
": Found Apple %s controller (%s), "
1101 "bus ID %d%s, irq %d\n", model_name
[pmif
->kind
],
1102 pmif
->mdev
? "macio" : "PCI", pmif
->aapl_bus_id
,
1103 pmif
->mediabay
? " (mediabay)" : "", hw
->irq
);
1105 hwif
= ide_find_port_slot(&d
);
1109 hwif
->exec_command
= pmac_exec_command
;
1110 hwif
->set_irq
= pmac_set_irq
;
1112 idx
[0] = hwif
->index
;
1114 ide_device_add(idx
, &d
, hws
);
1119 static void __devinit
pmac_ide_init_ports(hw_regs_t
*hw
, unsigned long base
)
1123 for (i
= 0; i
< 8; ++i
)
1124 hw
->io_ports_array
[i
] = base
+ i
* 0x10;
1126 hw
->io_ports
.ctl_addr
= base
+ 0x160;
1130 * Attach to a macio probed interface
1132 static int __devinit
1133 pmac_ide_macio_attach(struct macio_dev
*mdev
, const struct of_device_id
*match
)
1136 unsigned long regbase
;
1137 pmac_ide_hwif_t
*pmif
;
1141 pmif
= kzalloc(sizeof(*pmif
), GFP_KERNEL
);
1145 if (macio_resource_count(mdev
) == 0) {
1146 printk(KERN_WARNING
"ide-pmac: no address for %s\n",
1147 mdev
->ofdev
.node
->full_name
);
1152 /* Request memory resource for IO ports */
1153 if (macio_request_resource(mdev
, 0, "ide-pmac (ports)")) {
1154 printk(KERN_ERR
"ide-pmac: can't request MMIO resource for "
1155 "%s!\n", mdev
->ofdev
.node
->full_name
);
1160 /* XXX This is bogus. Should be fixed in the registry by checking
1161 * the kind of host interrupt controller, a bit like gatwick
1162 * fixes in irq.c. That works well enough for the single case
1163 * where that happens though...
1165 if (macio_irq_count(mdev
) == 0) {
1166 printk(KERN_WARNING
"ide-pmac: no intrs for device %s, using "
1167 "13\n", mdev
->ofdev
.node
->full_name
);
1168 irq
= irq_create_mapping(NULL
, 13);
1170 irq
= macio_irq(mdev
, 0);
1172 base
= ioremap(macio_resource_start(mdev
, 0), 0x400);
1173 regbase
= (unsigned long) base
;
1176 pmif
->node
= mdev
->ofdev
.node
;
1177 pmif
->regbase
= regbase
;
1179 pmif
->kauai_fcr
= NULL
;
1180 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
1181 if (macio_resource_count(mdev
) >= 2) {
1182 if (macio_request_resource(mdev
, 1, "ide-pmac (dma)"))
1183 printk(KERN_WARNING
"ide-pmac: can't request DMA "
1184 "resource for %s!\n",
1185 mdev
->ofdev
.node
->full_name
);
1187 pmif
->dma_regs
= ioremap(macio_resource_start(mdev
, 1), 0x1000);
1189 pmif
->dma_regs
= NULL
;
1190 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
1191 dev_set_drvdata(&mdev
->ofdev
.dev
, pmif
);
1193 memset(&hw
, 0, sizeof(hw
));
1194 pmac_ide_init_ports(&hw
, pmif
->regbase
);
1196 hw
.dev
= &mdev
->bus
->pdev
->dev
;
1197 hw
.parent
= &mdev
->ofdev
.dev
;
1199 rc
= pmac_ide_setup_device(pmif
, &hw
);
1201 /* The inteface is released to the common IDE layer */
1202 dev_set_drvdata(&mdev
->ofdev
.dev
, NULL
);
1204 if (pmif
->dma_regs
) {
1205 iounmap(pmif
->dma_regs
);
1206 macio_release_resource(mdev
, 1);
1208 macio_release_resource(mdev
, 0);
1220 pmac_ide_macio_suspend(struct macio_dev
*mdev
, pm_message_t mesg
)
1222 pmac_ide_hwif_t
*pmif
=
1223 (pmac_ide_hwif_t
*)dev_get_drvdata(&mdev
->ofdev
.dev
);
1226 if (mesg
.event
!= mdev
->ofdev
.dev
.power
.power_state
.event
1227 && (mesg
.event
& PM_EVENT_SLEEP
)) {
1228 rc
= pmac_ide_do_suspend(pmif
);
1230 mdev
->ofdev
.dev
.power
.power_state
= mesg
;
1237 pmac_ide_macio_resume(struct macio_dev
*mdev
)
1239 pmac_ide_hwif_t
*pmif
=
1240 (pmac_ide_hwif_t
*)dev_get_drvdata(&mdev
->ofdev
.dev
);
1243 if (mdev
->ofdev
.dev
.power
.power_state
.event
!= PM_EVENT_ON
) {
1244 rc
= pmac_ide_do_resume(pmif
);
1246 mdev
->ofdev
.dev
.power
.power_state
= PMSG_ON
;
1253 * Attach to a PCI probed interface
1255 static int __devinit
1256 pmac_ide_pci_attach(struct pci_dev
*pdev
, const struct pci_device_id
*id
)
1258 struct device_node
*np
;
1259 pmac_ide_hwif_t
*pmif
;
1261 unsigned long rbase
, rlen
;
1265 np
= pci_device_to_OF_node(pdev
);
1267 printk(KERN_ERR
"ide-pmac: cannot find MacIO node for Kauai ATA interface\n");
1271 pmif
= kzalloc(sizeof(*pmif
), GFP_KERNEL
);
1275 if (pci_enable_device(pdev
)) {
1276 printk(KERN_WARNING
"ide-pmac: Can't enable PCI device for "
1277 "%s\n", np
->full_name
);
1281 pci_set_master(pdev
);
1283 if (pci_request_regions(pdev
, "Kauai ATA")) {
1284 printk(KERN_ERR
"ide-pmac: Cannot obtain PCI resources for "
1285 "%s\n", np
->full_name
);
1293 rbase
= pci_resource_start(pdev
, 0);
1294 rlen
= pci_resource_len(pdev
, 0);
1296 base
= ioremap(rbase
, rlen
);
1297 pmif
->regbase
= (unsigned long) base
+ 0x2000;
1298 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
1299 pmif
->dma_regs
= base
+ 0x1000;
1300 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
1301 pmif
->kauai_fcr
= base
;
1302 pmif
->irq
= pdev
->irq
;
1304 pci_set_drvdata(pdev
, pmif
);
1306 memset(&hw
, 0, sizeof(hw
));
1307 pmac_ide_init_ports(&hw
, pmif
->regbase
);
1309 hw
.dev
= &pdev
->dev
;
1311 rc
= pmac_ide_setup_device(pmif
, &hw
);
1313 /* The inteface is released to the common IDE layer */
1314 pci_set_drvdata(pdev
, NULL
);
1316 pci_release_regions(pdev
);
1328 pmac_ide_pci_suspend(struct pci_dev
*pdev
, pm_message_t mesg
)
1330 pmac_ide_hwif_t
*pmif
= (pmac_ide_hwif_t
*)pci_get_drvdata(pdev
);
1333 if (mesg
.event
!= pdev
->dev
.power
.power_state
.event
1334 && (mesg
.event
& PM_EVENT_SLEEP
)) {
1335 rc
= pmac_ide_do_suspend(pmif
);
1337 pdev
->dev
.power
.power_state
= mesg
;
1344 pmac_ide_pci_resume(struct pci_dev
*pdev
)
1346 pmac_ide_hwif_t
*pmif
= (pmac_ide_hwif_t
*)pci_get_drvdata(pdev
);
1349 if (pdev
->dev
.power
.power_state
.event
!= PM_EVENT_ON
) {
1350 rc
= pmac_ide_do_resume(pmif
);
1352 pdev
->dev
.power
.power_state
= PMSG_ON
;
1358 static struct of_device_id pmac_ide_macio_match
[] =
1375 static struct macio_driver pmac_ide_macio_driver
=
1378 .match_table
= pmac_ide_macio_match
,
1379 .probe
= pmac_ide_macio_attach
,
1380 .suspend
= pmac_ide_macio_suspend
,
1381 .resume
= pmac_ide_macio_resume
,
1384 static const struct pci_device_id pmac_ide_pci_match
[] = {
1385 { PCI_VDEVICE(APPLE
, PCI_DEVICE_ID_APPLE_UNI_N_ATA
), 0 },
1386 { PCI_VDEVICE(APPLE
, PCI_DEVICE_ID_APPLE_IPID_ATA100
), 0 },
1387 { PCI_VDEVICE(APPLE
, PCI_DEVICE_ID_APPLE_K2_ATA100
), 0 },
1388 { PCI_VDEVICE(APPLE
, PCI_DEVICE_ID_APPLE_SH_ATA
), 0 },
1389 { PCI_VDEVICE(APPLE
, PCI_DEVICE_ID_APPLE_IPID2_ATA
), 0 },
1393 static struct pci_driver pmac_ide_pci_driver
= {
1395 .id_table
= pmac_ide_pci_match
,
1396 .probe
= pmac_ide_pci_attach
,
1397 .suspend
= pmac_ide_pci_suspend
,
1398 .resume
= pmac_ide_pci_resume
,
1400 MODULE_DEVICE_TABLE(pci
, pmac_ide_pci_match
);
1402 int __init
pmac_ide_probe(void)
1406 if (!machine_is(powermac
))
1409 #ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST
1410 error
= pci_register_driver(&pmac_ide_pci_driver
);
1413 error
= macio_register_driver(&pmac_ide_macio_driver
);
1415 pci_unregister_driver(&pmac_ide_pci_driver
);
1419 error
= macio_register_driver(&pmac_ide_macio_driver
);
1422 error
= pci_register_driver(&pmac_ide_pci_driver
);
1424 macio_unregister_driver(&pmac_ide_macio_driver
);
1432 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
1435 * pmac_ide_build_dmatable builds the DBDMA command list
1436 * for a transfer and sets the DBDMA channel to point to it.
1439 pmac_ide_build_dmatable(ide_drive_t
*drive
, struct request
*rq
)
1441 ide_hwif_t
*hwif
= drive
->hwif
;
1442 pmac_ide_hwif_t
*pmif
=
1443 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1444 struct dbdma_cmd
*table
;
1446 volatile struct dbdma_regs __iomem
*dma
= pmif
->dma_regs
;
1447 struct scatterlist
*sg
;
1448 int wr
= (rq_data_dir(rq
) == WRITE
);
1450 /* DMA table is already aligned */
1451 table
= (struct dbdma_cmd
*) pmif
->dma_table_cpu
;
1453 /* Make sure DMA controller is stopped (necessary ?) */
1454 writel((RUN
|PAUSE
|FLUSH
|WAKE
|DEAD
) << 16, &dma
->control
);
1455 while (readl(&dma
->status
) & RUN
)
1458 hwif
->sg_nents
= i
= ide_build_sglist(drive
, rq
);
1463 /* Build DBDMA commands list */
1464 sg
= hwif
->sg_table
;
1465 while (i
&& sg_dma_len(sg
)) {
1469 cur_addr
= sg_dma_address(sg
);
1470 cur_len
= sg_dma_len(sg
);
1472 if (pmif
->broken_dma
&& cur_addr
& (L1_CACHE_BYTES
- 1)) {
1473 if (pmif
->broken_dma_warn
== 0) {
1474 printk(KERN_WARNING
"%s: DMA on non aligned address, "
1475 "switching to PIO on Ohare chipset\n", drive
->name
);
1476 pmif
->broken_dma_warn
= 1;
1478 goto use_pio_instead
;
1481 unsigned int tc
= (cur_len
< 0xfe00)? cur_len
: 0xfe00;
1483 if (count
++ >= MAX_DCMDS
) {
1484 printk(KERN_WARNING
"%s: DMA table too small\n",
1486 goto use_pio_instead
;
1488 st_le16(&table
->command
, wr
? OUTPUT_MORE
: INPUT_MORE
);
1489 st_le16(&table
->req_count
, tc
);
1490 st_le32(&table
->phy_addr
, cur_addr
);
1492 table
->xfer_status
= 0;
1493 table
->res_count
= 0;
1502 /* convert the last command to an input/output last command */
1504 st_le16(&table
[-1].command
, wr
? OUTPUT_LAST
: INPUT_LAST
);
1505 /* add the stop command to the end of the list */
1506 memset(table
, 0, sizeof(struct dbdma_cmd
));
1507 st_le16(&table
->command
, DBDMA_STOP
);
1509 writel(hwif
->dmatable_dma
, &dma
->cmdptr
);
1513 printk(KERN_DEBUG
"%s: empty DMA table?\n", drive
->name
);
1516 ide_destroy_dmatable(drive
);
1518 return 0; /* revert to PIO for this request */
1521 /* Teardown mappings after DMA has completed. */
1523 pmac_ide_destroy_dmatable (ide_drive_t
*drive
)
1525 ide_hwif_t
*hwif
= drive
->hwif
;
1527 if (hwif
->sg_nents
) {
1528 ide_destroy_dmatable(drive
);
1534 * Prepare a DMA transfer. We build the DMA table, adjust the timings for
1535 * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
1538 pmac_ide_dma_setup(ide_drive_t
*drive
)
1540 ide_hwif_t
*hwif
= HWIF(drive
);
1541 pmac_ide_hwif_t
*pmif
=
1542 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1543 struct request
*rq
= HWGROUP(drive
)->rq
;
1544 u8 unit
= (drive
->select
.b
.unit
& 0x01);
1549 ata4
= (pmif
->kind
== controller_kl_ata4
);
1551 if (!pmac_ide_build_dmatable(drive
, rq
)) {
1552 ide_map_sg(drive
, rq
);
1556 /* Apple adds 60ns to wrDataSetup on reads */
1557 if (ata4
&& (pmif
->timings
[unit
] & TR_66_UDMA_EN
)) {
1558 writel(pmif
->timings
[unit
] + (!rq_data_dir(rq
) ? 0x00800000UL
: 0),
1559 PMAC_IDE_REG(IDE_TIMING_CONFIG
));
1560 (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG
));
1563 drive
->waiting_for_dma
= 1;
1569 pmac_ide_dma_exec_cmd(ide_drive_t
*drive
, u8 command
)
1571 /* issue cmd to drive */
1572 ide_execute_command(drive
, command
, &ide_dma_intr
, 2*WAIT_CMD
, NULL
);
1576 * Kick the DMA controller into life after the DMA command has been issued
1580 pmac_ide_dma_start(ide_drive_t
*drive
)
1582 ide_hwif_t
*hwif
= drive
->hwif
;
1583 pmac_ide_hwif_t
*pmif
=
1584 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1585 volatile struct dbdma_regs __iomem
*dma
;
1587 dma
= pmif
->dma_regs
;
1589 writel((RUN
<< 16) | RUN
, &dma
->control
);
1590 /* Make sure it gets to the controller right now */
1591 (void)readl(&dma
->control
);
1595 * After a DMA transfer, make sure the controller is stopped
1598 pmac_ide_dma_end (ide_drive_t
*drive
)
1600 ide_hwif_t
*hwif
= drive
->hwif
;
1601 pmac_ide_hwif_t
*pmif
=
1602 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1603 volatile struct dbdma_regs __iomem
*dma
;
1608 dma
= pmif
->dma_regs
;
1610 drive
->waiting_for_dma
= 0;
1611 dstat
= readl(&dma
->status
);
1612 writel(((RUN
|WAKE
|DEAD
) << 16), &dma
->control
);
1613 pmac_ide_destroy_dmatable(drive
);
1614 /* verify good dma status. we don't check for ACTIVE beeing 0. We should...
1615 * in theory, but with ATAPI decices doing buffer underruns, that would
1616 * cause us to disable DMA, which isn't what we want
1618 return (dstat
& (RUN
|DEAD
)) != RUN
;
1622 * Check out that the interrupt we got was for us. We can't always know this
1623 * for sure with those Apple interfaces (well, we could on the recent ones but
1624 * that's not implemented yet), on the other hand, we don't have shared interrupts
1625 * so it's not really a problem
1628 pmac_ide_dma_test_irq (ide_drive_t
*drive
)
1630 ide_hwif_t
*hwif
= drive
->hwif
;
1631 pmac_ide_hwif_t
*pmif
=
1632 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1633 volatile struct dbdma_regs __iomem
*dma
;
1634 unsigned long status
, timeout
;
1638 dma
= pmif
->dma_regs
;
1640 /* We have to things to deal with here:
1642 * - The dbdma won't stop if the command was started
1643 * but completed with an error without transferring all
1644 * datas. This happens when bad blocks are met during
1645 * a multi-block transfer.
1647 * - The dbdma fifo hasn't yet finished flushing to
1648 * to system memory when the disk interrupt occurs.
1652 /* If ACTIVE is cleared, the STOP command have passed and
1653 * transfer is complete.
1655 status
= readl(&dma
->status
);
1656 if (!(status
& ACTIVE
))
1658 if (!drive
->waiting_for_dma
)
1659 printk(KERN_WARNING
"ide%d, ide_dma_test_irq \
1660 called while not waiting\n", HWIF(drive
)->index
);
1662 /* If dbdma didn't execute the STOP command yet, the
1663 * active bit is still set. We consider that we aren't
1664 * sharing interrupts (which is hopefully the case with
1665 * those controllers) and so we just try to flush the
1666 * channel for pending data in the fifo
1669 writel((FLUSH
<< 16) | FLUSH
, &dma
->control
);
1673 status
= readl(&dma
->status
);
1674 if ((status
& FLUSH
) == 0)
1676 if (++timeout
> 100) {
1677 printk(KERN_WARNING
"ide%d, ide_dma_test_irq \
1678 timeout flushing channel\n", HWIF(drive
)->index
);
1685 static void pmac_ide_dma_host_set(ide_drive_t
*drive
, int on
)
1690 pmac_ide_dma_lost_irq (ide_drive_t
*drive
)
1692 ide_hwif_t
*hwif
= drive
->hwif
;
1693 pmac_ide_hwif_t
*pmif
=
1694 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1695 volatile struct dbdma_regs __iomem
*dma
;
1696 unsigned long status
;
1700 dma
= pmif
->dma_regs
;
1702 status
= readl(&dma
->status
);
1703 printk(KERN_ERR
"ide-pmac lost interrupt, dma status: %lx\n", status
);
1706 static const struct ide_dma_ops pmac_dma_ops
= {
1707 .dma_host_set
= pmac_ide_dma_host_set
,
1708 .dma_setup
= pmac_ide_dma_setup
,
1709 .dma_exec_cmd
= pmac_ide_dma_exec_cmd
,
1710 .dma_start
= pmac_ide_dma_start
,
1711 .dma_end
= pmac_ide_dma_end
,
1712 .dma_test_irq
= pmac_ide_dma_test_irq
,
1713 .dma_timeout
= ide_dma_timeout
,
1714 .dma_lost_irq
= pmac_ide_dma_lost_irq
,
1718 * Allocate the data structures needed for using DMA with an interface
1719 * and fill the proper list of functions pointers
1721 static int __devinit
pmac_ide_init_dma(ide_hwif_t
*hwif
,
1722 const struct ide_port_info
*d
)
1724 pmac_ide_hwif_t
*pmif
=
1725 (pmac_ide_hwif_t
*)dev_get_drvdata(hwif
->gendev
.parent
);
1726 struct pci_dev
*dev
= to_pci_dev(hwif
->dev
);
1728 /* We won't need pci_dev if we switch to generic consistent
1731 if (dev
== NULL
|| pmif
->dma_regs
== 0)
1734 * Allocate space for the DBDMA commands.
1735 * The +2 is +1 for the stop command and +1 to allow for
1736 * aligning the start address to a multiple of 16 bytes.
1738 pmif
->dma_table_cpu
= (struct dbdma_cmd
*)pci_alloc_consistent(
1740 (MAX_DCMDS
+ 2) * sizeof(struct dbdma_cmd
),
1741 &hwif
->dmatable_dma
);
1742 if (pmif
->dma_table_cpu
== NULL
) {
1743 printk(KERN_ERR
"%s: unable to allocate DMA command list\n",
1748 hwif
->sg_max_nents
= MAX_DCMDS
;
1753 static int __devinit
pmac_ide_init_dma(ide_hwif_t
*hwif
,
1754 const struct ide_port_info
*d
)
1758 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
1760 module_init(pmac_ide_probe
);
1762 MODULE_LICENSE("GPL");