3 * Copyright (c) 2012, Intel Corporation.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 #include <linux/device.h>
20 #include <linux/platform_device.h>
21 #include <linux/module.h>
22 #include <linux/interrupt.h>
23 #include <linux/irq.h>
24 #include <linux/slab.h>
25 #include <linux/hid-sensor-hub.h>
26 #include <linux/iio/iio.h>
27 #include <linux/iio/sysfs.h>
28 #include <linux/iio/buffer.h>
29 #include <linux/iio/trigger_consumer.h>
30 #include <linux/iio/triggered_buffer.h>
31 #include "../common/hid-sensors/hid-sensor-trigger.h"
33 /*Format: HID-SENSOR-usage_id_in_hex*/
34 /*Usage ID from spec for Gyro-3D: 0x200076*/
35 #define DRIVER_NAME "HID-SENSOR-200076"
37 enum gyro_3d_channel
{
44 struct gyro_3d_state
{
45 struct hid_sensor_hub_callbacks callbacks
;
46 struct hid_sensor_common common_attributes
;
47 struct hid_sensor_hub_attribute_info gyro
[GYRO_3D_CHANNEL_MAX
];
48 u32 gyro_val
[GYRO_3D_CHANNEL_MAX
];
51 static const u32 gyro_3d_addresses
[GYRO_3D_CHANNEL_MAX
] = {
52 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS
,
53 HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS
,
54 HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS
57 /* Channel definitions */
58 static const struct iio_chan_spec gyro_3d_channels
[] = {
62 .channel2
= IIO_MOD_X
,
63 .info_mask
= IIO_CHAN_INFO_OFFSET_SHARED_BIT
|
64 IIO_CHAN_INFO_SCALE_SHARED_BIT
|
65 IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT
|
66 IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT
,
67 .scan_index
= CHANNEL_SCAN_INDEX_X
,
71 .channel2
= IIO_MOD_Y
,
72 .info_mask
= IIO_CHAN_INFO_OFFSET_SHARED_BIT
|
73 IIO_CHAN_INFO_SCALE_SHARED_BIT
|
74 IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT
|
75 IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT
,
76 .scan_index
= CHANNEL_SCAN_INDEX_Y
,
80 .channel2
= IIO_MOD_Z
,
81 .info_mask
= IIO_CHAN_INFO_OFFSET_SHARED_BIT
|
82 IIO_CHAN_INFO_SCALE_SHARED_BIT
|
83 IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT
|
84 IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT
,
85 .scan_index
= CHANNEL_SCAN_INDEX_Z
,
89 /* Adjust channel real bits based on report descriptor */
90 static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec
*channels
,
91 int channel
, int size
)
93 channels
[channel
].scan_type
.sign
= 's';
94 /* Real storage bits will change based on the report desc. */
95 channels
[channel
].scan_type
.realbits
= size
* 8;
96 /* Maximum size of a sample to capture is u32 */
97 channels
[channel
].scan_type
.storagebits
= sizeof(u32
) * 8;
100 /* Channel read_raw handler */
101 static int gyro_3d_read_raw(struct iio_dev
*indio_dev
,
102 struct iio_chan_spec
const *chan
,
106 struct gyro_3d_state
*gyro_state
= iio_priv(indio_dev
);
116 report_id
= gyro_state
->gyro
[chan
->scan_index
].report_id
;
117 address
= gyro_3d_addresses
[chan
->scan_index
];
119 *val
= sensor_hub_input_attr_get_raw_value(
120 gyro_state
->common_attributes
.hsdev
,
121 HID_USAGE_SENSOR_GYRO_3D
, address
,
127 ret_type
= IIO_VAL_INT
;
129 case IIO_CHAN_INFO_SCALE
:
130 *val
= gyro_state
->gyro
[CHANNEL_SCAN_INDEX_X
].units
;
131 ret_type
= IIO_VAL_INT
;
133 case IIO_CHAN_INFO_OFFSET
:
134 *val
= hid_sensor_convert_exponent(
135 gyro_state
->gyro
[CHANNEL_SCAN_INDEX_X
].unit_expo
);
136 ret_type
= IIO_VAL_INT
;
138 case IIO_CHAN_INFO_SAMP_FREQ
:
139 ret
= hid_sensor_read_samp_freq_value(
140 &gyro_state
->common_attributes
, val
, val2
);
141 ret_type
= IIO_VAL_INT_PLUS_MICRO
;
143 case IIO_CHAN_INFO_HYSTERESIS
:
144 ret
= hid_sensor_read_raw_hyst_value(
145 &gyro_state
->common_attributes
, val
, val2
);
146 ret_type
= IIO_VAL_INT_PLUS_MICRO
;
156 /* Channel write_raw handler */
157 static int gyro_3d_write_raw(struct iio_dev
*indio_dev
,
158 struct iio_chan_spec
const *chan
,
163 struct gyro_3d_state
*gyro_state
= iio_priv(indio_dev
);
167 case IIO_CHAN_INFO_SAMP_FREQ
:
168 ret
= hid_sensor_write_samp_freq_value(
169 &gyro_state
->common_attributes
, val
, val2
);
171 case IIO_CHAN_INFO_HYSTERESIS
:
172 ret
= hid_sensor_write_raw_hyst_value(
173 &gyro_state
->common_attributes
, val
, val2
);
182 static int gyro_3d_write_raw_get_fmt(struct iio_dev
*indio_dev
,
183 struct iio_chan_spec
const *chan
,
186 return IIO_VAL_INT_PLUS_MICRO
;
189 static const struct iio_info gyro_3d_info
= {
190 .driver_module
= THIS_MODULE
,
191 .read_raw
= &gyro_3d_read_raw
,
192 .write_raw
= &gyro_3d_write_raw
,
193 .write_raw_get_fmt
= &gyro_3d_write_raw_get_fmt
,
196 /* Function to push data to buffer */
197 static void hid_sensor_push_data(struct iio_dev
*indio_dev
, u8
*data
, int len
)
199 dev_dbg(&indio_dev
->dev
, "hid_sensor_push_data\n");
200 iio_push_to_buffers(indio_dev
, (u8
*)data
);
203 /* Callback handler to send event after all samples are received and captured */
204 static int gyro_3d_proc_event(struct hid_sensor_hub_device
*hsdev
,
208 struct iio_dev
*indio_dev
= platform_get_drvdata(priv
);
209 struct gyro_3d_state
*gyro_state
= iio_priv(indio_dev
);
211 dev_dbg(&indio_dev
->dev
, "gyro_3d_proc_event [%d]\n",
212 gyro_state
->common_attributes
.data_ready
);
213 if (gyro_state
->common_attributes
.data_ready
)
214 hid_sensor_push_data(indio_dev
,
215 (u8
*)gyro_state
->gyro_val
,
216 sizeof(gyro_state
->gyro_val
));
221 /* Capture samples in local storage */
222 static int gyro_3d_capture_sample(struct hid_sensor_hub_device
*hsdev
,
224 size_t raw_len
, char *raw_data
,
227 struct iio_dev
*indio_dev
= platform_get_drvdata(priv
);
228 struct gyro_3d_state
*gyro_state
= iio_priv(indio_dev
);
233 case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS
:
234 case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS
:
235 case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS
:
236 offset
= usage_id
- HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS
;
237 gyro_state
->gyro_val
[CHANNEL_SCAN_INDEX_X
+ offset
] =
248 /* Parse report which is specific to an usage id*/
249 static int gyro_3d_parse_report(struct platform_device
*pdev
,
250 struct hid_sensor_hub_device
*hsdev
,
251 struct iio_chan_spec
*channels
,
253 struct gyro_3d_state
*st
)
258 for (i
= 0; i
<= CHANNEL_SCAN_INDEX_Z
; ++i
) {
259 ret
= sensor_hub_input_get_attribute_info(hsdev
,
262 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS
+ i
,
263 &st
->gyro
[CHANNEL_SCAN_INDEX_X
+ i
]);
266 gyro_3d_adjust_channel_bit_mask(channels
,
267 CHANNEL_SCAN_INDEX_X
+ i
,
268 st
->gyro
[CHANNEL_SCAN_INDEX_X
+ i
].size
);
270 dev_dbg(&pdev
->dev
, "gyro_3d %x:%x, %x:%x, %x:%x\n",
272 st
->gyro
[0].report_id
,
273 st
->gyro
[1].index
, st
->gyro
[1].report_id
,
274 st
->gyro
[2].index
, st
->gyro
[2].report_id
);
279 /* Function to initialize the processing for usage id */
280 static int hid_gyro_3d_probe(struct platform_device
*pdev
)
283 static const char *name
= "gyro_3d";
284 struct iio_dev
*indio_dev
;
285 struct gyro_3d_state
*gyro_state
;
286 struct hid_sensor_hub_device
*hsdev
= pdev
->dev
.platform_data
;
287 struct iio_chan_spec
*channels
;
289 indio_dev
= iio_device_alloc(sizeof(struct gyro_3d_state
));
290 if (indio_dev
== NULL
) {
294 platform_set_drvdata(pdev
, indio_dev
);
296 gyro_state
= iio_priv(indio_dev
);
297 gyro_state
->common_attributes
.hsdev
= hsdev
;
298 gyro_state
->common_attributes
.pdev
= pdev
;
300 ret
= hid_sensor_parse_common_attributes(hsdev
,
301 HID_USAGE_SENSOR_GYRO_3D
,
302 &gyro_state
->common_attributes
);
304 dev_err(&pdev
->dev
, "failed to setup common attributes\n");
308 channels
= kmemdup(gyro_3d_channels
, sizeof(gyro_3d_channels
),
312 dev_err(&pdev
->dev
, "failed to duplicate channels\n");
316 ret
= gyro_3d_parse_report(pdev
, hsdev
, channels
,
317 HID_USAGE_SENSOR_GYRO_3D
, gyro_state
);
319 dev_err(&pdev
->dev
, "failed to setup attributes\n");
320 goto error_free_dev_mem
;
323 indio_dev
->channels
= channels
;
324 indio_dev
->num_channels
= ARRAY_SIZE(gyro_3d_channels
);
325 indio_dev
->dev
.parent
= &pdev
->dev
;
326 indio_dev
->info
= &gyro_3d_info
;
327 indio_dev
->name
= name
;
328 indio_dev
->modes
= INDIO_DIRECT_MODE
;
330 ret
= iio_triggered_buffer_setup(indio_dev
, &iio_pollfunc_store_time
,
333 dev_err(&pdev
->dev
, "failed to initialize trigger buffer\n");
334 goto error_free_dev_mem
;
336 gyro_state
->common_attributes
.data_ready
= false;
337 ret
= hid_sensor_setup_trigger(indio_dev
, name
,
338 &gyro_state
->common_attributes
);
340 dev_err(&pdev
->dev
, "trigger setup failed\n");
341 goto error_unreg_buffer_funcs
;
344 ret
= iio_device_register(indio_dev
);
346 dev_err(&pdev
->dev
, "device register failed\n");
347 goto error_remove_trigger
;
350 gyro_state
->callbacks
.send_event
= gyro_3d_proc_event
;
351 gyro_state
->callbacks
.capture_sample
= gyro_3d_capture_sample
;
352 gyro_state
->callbacks
.pdev
= pdev
;
353 ret
= sensor_hub_register_callback(hsdev
, HID_USAGE_SENSOR_GYRO_3D
,
354 &gyro_state
->callbacks
);
356 dev_err(&pdev
->dev
, "callback reg failed\n");
357 goto error_iio_unreg
;
363 iio_device_unregister(indio_dev
);
364 error_remove_trigger
:
365 hid_sensor_remove_trigger(indio_dev
);
366 error_unreg_buffer_funcs
:
367 iio_triggered_buffer_cleanup(indio_dev
);
369 kfree(indio_dev
->channels
);
371 iio_device_free(indio_dev
);
376 /* Function to deinitialize the processing for usage id */
377 static int hid_gyro_3d_remove(struct platform_device
*pdev
)
379 struct hid_sensor_hub_device
*hsdev
= pdev
->dev
.platform_data
;
380 struct iio_dev
*indio_dev
= platform_get_drvdata(pdev
);
382 sensor_hub_remove_callback(hsdev
, HID_USAGE_SENSOR_GYRO_3D
);
383 iio_device_unregister(indio_dev
);
384 hid_sensor_remove_trigger(indio_dev
);
385 iio_triggered_buffer_cleanup(indio_dev
);
386 kfree(indio_dev
->channels
);
387 iio_device_free(indio_dev
);
392 static struct platform_driver hid_gyro_3d_platform_driver
= {
395 .owner
= THIS_MODULE
,
397 .probe
= hid_gyro_3d_probe
,
398 .remove
= hid_gyro_3d_remove
,
400 module_platform_driver(hid_gyro_3d_platform_driver
);
402 MODULE_DESCRIPTION("HID Sensor Gyroscope 3D");
403 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
404 MODULE_LICENSE("GPL");