projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ASoC: fsl: Add S/PDIF CPU DAI driver
[deliverable/linux.git] / drivers / infiniband / hw / qib / qib_iba7322.c
1 /*
2 * Copyright (c) 2012 Intel Corporation. All rights reserved.
3 * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved.
4 *
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the
9 * OpenIB.org BSD license below:
10 *
11 * Redistribution and use in source and binary forms, with or
12 * without modification, are permitted provided that the following
13 * conditions are met:
14 *
15 * - Redistributions of source code must retain the above
16 * copyright notice, this list of conditions and the following
17 * disclaimer.
18 *
19 * - Redistributions in binary form must reproduce the above
20 * copyright notice, this list of conditions and the following
21 * disclaimer in the documentation and/or other materials
22 * provided with the distribution.
23 *
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31 * SOFTWARE.
32 */
33
34 /*
35 * This file contains all of the code that is specific to the
36 * InfiniPath 7322 chip
37 */
38
39 #include <linux/interrupt.h>
40 #include <linux/pci.h>
41 #include <linux/delay.h>
42 #include <linux/io.h>
43 #include <linux/jiffies.h>
44 #include <linux/module.h>
45 #include <rdma/ib_verbs.h>
46 #include <rdma/ib_smi.h>
47 #ifdef CONFIG_INFINIBAND_QIB_DCA
48 #include <linux/dca.h>
49 #endif
50
51 #include "qib.h"
52 #include "qib_7322_regs.h"
53 #include "qib_qsfp.h"
54
55 #include "qib_mad.h"
56 #include "qib_verbs.h"
57
58 #undef pr_fmt
59 #define pr_fmt(fmt) QIB_DRV_NAME " " fmt
60
61 static void qib_setup_7322_setextled(struct qib_pportdata *, u32);
62 static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t);
63 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op);
64 static irqreturn_t qib_7322intr(int irq, void *data);
65 static irqreturn_t qib_7322bufavail(int irq, void *data);
66 static irqreturn_t sdma_intr(int irq, void *data);
67 static irqreturn_t sdma_idle_intr(int irq, void *data);
68 static irqreturn_t sdma_progress_intr(int irq, void *data);
69 static irqreturn_t sdma_cleanup_intr(int irq, void *data);
70 static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32,
71 struct qib_ctxtdata *rcd);
72 static u8 qib_7322_phys_portstate(u64);
73 static u32 qib_7322_iblink_state(u64);
74 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd,
75 u16 linitcmd);
76 static void force_h1(struct qib_pportdata *);
77 static void adj_tx_serdes(struct qib_pportdata *);
78 static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8);
79 static void qib_7322_mini_pcs_reset(struct qib_pportdata *);
80
81 static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32);
82 static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned);
83 static void serdes_7322_los_enable(struct qib_pportdata *, int);
84 static int serdes_7322_init_old(struct qib_pportdata *);
85 static int serdes_7322_init_new(struct qib_pportdata *);
86 static void dump_sdma_7322_state(struct qib_pportdata *);
87
88 #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb))
89
90 /* LE2 serdes values for different cases */
91 #define LE2_DEFAULT 5
92 #define LE2_5m 4
93 #define LE2_QME 0
94
95 /* Below is special-purpose, so only really works for the IB SerDes blocks. */
96 #define IBSD(hw_pidx) (hw_pidx + 2)
97
98 /* these are variables for documentation and experimentation purposes */
99 static const unsigned rcv_int_timeout = 375;
100 static const unsigned rcv_int_count = 16;
101 static const unsigned sdma_idle_cnt = 64;
102
103 /* Time to stop altering Rx Equalization parameters, after link up. */
104 #define RXEQ_DISABLE_MSECS 2500
105
106 /*
107 * Number of VLs we are configured to use (to allow for more
108 * credits per vl, etc.)
109 */
110 ushort qib_num_cfg_vls = 2;
111 module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO);
112 MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)");
113
114 static ushort qib_chase = 1;
115 module_param_named(chase, qib_chase, ushort, S_IRUGO);
116 MODULE_PARM_DESC(chase, "Enable state chase handling");
117
118 static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */
119 module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO);
120 MODULE_PARM_DESC(long_attenuation, \
121 "attenuation cutoff (dB) for long copper cable setup");
122
123 static ushort qib_singleport;
124 module_param_named(singleport, qib_singleport, ushort, S_IRUGO);
125 MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space");
126
127 static ushort qib_krcvq01_no_msi;
128 module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO);
129 MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2");
130
131 /*
132 * Receive header queue sizes
133 */
134 static unsigned qib_rcvhdrcnt;
135 module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO);
136 MODULE_PARM_DESC(rcvhdrcnt, "receive header count");
137
138 static unsigned qib_rcvhdrsize;
139 module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO);
140 MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words");
141
142 static unsigned qib_rcvhdrentsize;
143 module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO);
144 MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words");
145
146 #define MAX_ATTEN_LEN 64 /* plenty for any real system */
147 /* for read back, default index is ~5m copper cable */
148 static char txselect_list[MAX_ATTEN_LEN] = "10";
149 static struct kparam_string kp_txselect = {
150 .string = txselect_list,
151 .maxlen = MAX_ATTEN_LEN
152 };
153 static int setup_txselect(const char *, struct kernel_param *);
154 module_param_call(txselect, setup_txselect, param_get_string,
155 &kp_txselect, S_IWUSR | S_IRUGO);
156 MODULE_PARM_DESC(txselect, \
157 "Tx serdes indices (for no QSFP or invalid QSFP data)");
158
159 #define BOARD_QME7342 5
160 #define BOARD_QMH7342 6
161 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \
162 BOARD_QMH7342)
163 #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \
164 BOARD_QME7342)
165
166 #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64))
167
168 #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64)))
169
170 #define MASK_ACROSS(lsb, msb) \
171 (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb))
172
173 #define SYM_RMASK(regname, fldname) ((u64) \
174 QIB_7322_##regname##_##fldname##_RMASK)
175
176 #define SYM_MASK(regname, fldname) ((u64) \
177 QIB_7322_##regname##_##fldname##_RMASK << \
178 QIB_7322_##regname##_##fldname##_LSB)
179
180 #define SYM_FIELD(value, regname, fldname) ((u64) \
181 (((value) >> SYM_LSB(regname, fldname)) & \
182 SYM_RMASK(regname, fldname)))
183
184 /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */
185 #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \
186 (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits))
187
188 #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
189 #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
190 #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask)
191 #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask)
192 #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port)
193 /* Below because most, but not all, fields of IntMask have that full suffix */
194 #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port)
195
196
197 #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB)
198
199 /*
200 * the size bits give us 2^N, in KB units. 0 marks as invalid,
201 * and 7 is reserved. We currently use only 2KB and 4KB
202 */
203 #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB
204 #define IBA7322_TID_SZ_2K (1UL<<IBA7322_TID_SZ_SHIFT) /* 2KB */
205 #define IBA7322_TID_SZ_4K (2UL<<IBA7322_TID_SZ_SHIFT) /* 4KB */
206 #define IBA7322_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
207
208 #define SendIBSLIDAssignMask \
209 QIB_7322_SendIBSLIDAssign_0_SendIBSLIDAssign_15_0_RMASK
210 #define SendIBSLMCMask \
211 QIB_7322_SendIBSLIDMask_0_SendIBSLIDMask_15_0_RMASK
212
213 #define ExtLED_IB1_YEL SYM_MASK(EXTCtrl, LEDPort0YellowOn)
214 #define ExtLED_IB1_GRN SYM_MASK(EXTCtrl, LEDPort0GreenOn)
215 #define ExtLED_IB2_YEL SYM_MASK(EXTCtrl, LEDPort1YellowOn)
216 #define ExtLED_IB2_GRN SYM_MASK(EXTCtrl, LEDPort1GreenOn)
217 #define ExtLED_IB1_MASK (ExtLED_IB1_YEL | ExtLED_IB1_GRN)
218 #define ExtLED_IB2_MASK (ExtLED_IB2_YEL | ExtLED_IB2_GRN)
219
220 #define _QIB_GPIO_SDA_NUM 1
221 #define _QIB_GPIO_SCL_NUM 0
222 #define QIB_EEPROM_WEN_NUM 14
223 #define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7322 cards. */
224
225 /* HW counter clock is at 4nsec */
226 #define QIB_7322_PSXMITWAIT_CHECK_RATE 4000
227
228 /* full speed IB port 1 only */
229 #define PORT_SPD_CAP (QIB_IB_SDR | QIB_IB_DDR | QIB_IB_QDR)
230 #define PORT_SPD_CAP_SHIFT 3
231
232 /* full speed featuremask, both ports */
233 #define DUAL_PORT_CAP (PORT_SPD_CAP | (PORT_SPD_CAP << PORT_SPD_CAP_SHIFT))
234
235 /*
236 * This file contains almost all the chip-specific register information and
237 * access functions for the FAKED QLogic InfiniPath 7322 PCI-Express chip.
238 */
239
240 /* Use defines to tie machine-generated names to lower-case names */
241 #define kr_contextcnt KREG_IDX(ContextCnt)
242 #define kr_control KREG_IDX(Control)
243 #define kr_counterregbase KREG_IDX(CntrRegBase)
244 #define kr_errclear KREG_IDX(ErrClear)
245 #define kr_errmask KREG_IDX(ErrMask)
246 #define kr_errstatus KREG_IDX(ErrStatus)
247 #define kr_extctrl KREG_IDX(EXTCtrl)
248 #define kr_extstatus KREG_IDX(EXTStatus)
249 #define kr_gpio_clear KREG_IDX(GPIOClear)
250 #define kr_gpio_mask KREG_IDX(GPIOMask)
251 #define kr_gpio_out KREG_IDX(GPIOOut)
252 #define kr_gpio_status KREG_IDX(GPIOStatus)
253 #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
254 #define kr_debugportval KREG_IDX(DebugPortValueReg)
255 #define kr_fmask KREG_IDX(feature_mask)
256 #define kr_act_fmask KREG_IDX(active_feature_mask)
257 #define kr_hwerrclear KREG_IDX(HwErrClear)
258 #define kr_hwerrmask KREG_IDX(HwErrMask)
259 #define kr_hwerrstatus KREG_IDX(HwErrStatus)
260 #define kr_intclear KREG_IDX(IntClear)
261 #define kr_intmask KREG_IDX(IntMask)
262 #define kr_intredirect KREG_IDX(IntRedirect0)
263 #define kr_intstatus KREG_IDX(IntStatus)
264 #define kr_pagealign KREG_IDX(PageAlign)
265 #define kr_rcvavailtimeout KREG_IDX(RcvAvailTimeOut0)
266 #define kr_rcvctrl KREG_IDX(RcvCtrl) /* Common, but chip also has per-port */
267 #define kr_rcvegrbase KREG_IDX(RcvEgrBase)
268 #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
269 #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
270 #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
271 #define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
272 #define kr_rcvtidbase KREG_IDX(RcvTIDBase)
273 #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
274 #define kr_revision KREG_IDX(Revision)
275 #define kr_scratch KREG_IDX(Scratch)
276 #define kr_sendbuffererror KREG_IDX(SendBufErr0) /* and base for 1 and 2 */
277 #define kr_sendcheckmask KREG_IDX(SendCheckMask0) /* and 1, 2 */
278 #define kr_sendctrl KREG_IDX(SendCtrl)
279 #define kr_sendgrhcheckmask KREG_IDX(SendGRHCheckMask0) /* and 1, 2 */
280 #define kr_sendibpktmask KREG_IDX(SendIBPacketMask0) /* and 1, 2 */
281 #define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr)
282 #define kr_sendpiobufbase KREG_IDX(SendBufBase)
283 #define kr_sendpiobufcnt KREG_IDX(SendBufCnt)
284 #define kr_sendpiosize KREG_IDX(SendBufSize)
285 #define kr_sendregbase KREG_IDX(SendRegBase)
286 #define kr_sendbufavail0 KREG_IDX(SendBufAvail0)
287 #define kr_userregbase KREG_IDX(UserRegBase)
288 #define kr_intgranted KREG_IDX(Int_Granted)
289 #define kr_vecclr_wo_int KREG_IDX(vec_clr_without_int)
290 #define kr_intblocked KREG_IDX(IntBlocked)
291 #define kr_r_access KREG_IDX(SPC_JTAG_ACCESS_REG)
292
293 /*
294 * per-port kernel registers. Access only with qib_read_kreg_port()
295 * or qib_write_kreg_port()
296 */
297 #define krp_errclear KREG_IBPORT_IDX(ErrClear)
298 #define krp_errmask KREG_IBPORT_IDX(ErrMask)
299 #define krp_errstatus KREG_IBPORT_IDX(ErrStatus)
300 #define krp_highprio_0 KREG_IBPORT_IDX(HighPriority0)
301 #define krp_highprio_limit KREG_IBPORT_IDX(HighPriorityLimit)
302 #define krp_hrtbt_guid KREG_IBPORT_IDX(HRTBT_GUID)
303 #define krp_ib_pcsconfig KREG_IBPORT_IDX(IBPCSConfig)
304 #define krp_ibcctrl_a KREG_IBPORT_IDX(IBCCtrlA)
305 #define krp_ibcctrl_b KREG_IBPORT_IDX(IBCCtrlB)
306 #define krp_ibcctrl_c KREG_IBPORT_IDX(IBCCtrlC)
307 #define krp_ibcstatus_a KREG_IBPORT_IDX(IBCStatusA)
308 #define krp_ibcstatus_b KREG_IBPORT_IDX(IBCStatusB)
309 #define krp_txestatus KREG_IBPORT_IDX(TXEStatus)
310 #define krp_lowprio_0 KREG_IBPORT_IDX(LowPriority0)
311 #define krp_ncmodectrl KREG_IBPORT_IDX(IBNCModeCtrl)
312 #define krp_partitionkey KREG_IBPORT_IDX(RcvPartitionKey)
313 #define krp_psinterval KREG_IBPORT_IDX(PSInterval)
314 #define krp_psstart KREG_IBPORT_IDX(PSStart)
315 #define krp_psstat KREG_IBPORT_IDX(PSStat)
316 #define krp_rcvbthqp KREG_IBPORT_IDX(RcvBTHQP)
317 #define krp_rcvctrl KREG_IBPORT_IDX(RcvCtrl)
318 #define krp_rcvpktledcnt KREG_IBPORT_IDX(RcvPktLEDCnt)
319 #define krp_rcvqpmaptable KREG_IBPORT_IDX(RcvQPMapTableA)
320 #define krp_rxcreditvl0 KREG_IBPORT_IDX(RxCreditVL0)
321 #define krp_rxcreditvl15 (KREG_IBPORT_IDX(RxCreditVL0)+15)
322 #define krp_sendcheckcontrol KREG_IBPORT_IDX(SendCheckControl)
323 #define krp_sendctrl KREG_IBPORT_IDX(SendCtrl)
324 #define krp_senddmabase KREG_IBPORT_IDX(SendDmaBase)
325 #define krp_senddmabufmask0 KREG_IBPORT_IDX(SendDmaBufMask0)
326 #define krp_senddmabufmask1 (KREG_IBPORT_IDX(SendDmaBufMask0) + 1)
327 #define krp_senddmabufmask2 (KREG_IBPORT_IDX(SendDmaBufMask0) + 2)
328 #define krp_senddmabuf_use0 KREG_IBPORT_IDX(SendDmaBufUsed0)
329 #define krp_senddmabuf_use1 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 1)
330 #define krp_senddmabuf_use2 (KREG_IBPORT_IDX(SendDmaBufUsed0) + 2)
331 #define krp_senddmadesccnt KREG_IBPORT_IDX(SendDmaDescCnt)
332 #define krp_senddmahead KREG_IBPORT_IDX(SendDmaHead)
333 #define krp_senddmaheadaddr KREG_IBPORT_IDX(SendDmaHeadAddr)
334 #define krp_senddmaidlecnt KREG_IBPORT_IDX(SendDmaIdleCnt)
335 #define krp_senddmalengen KREG_IBPORT_IDX(SendDmaLenGen)
336 #define krp_senddmaprioritythld KREG_IBPORT_IDX(SendDmaPriorityThld)
337 #define krp_senddmareloadcnt KREG_IBPORT_IDX(SendDmaReloadCnt)
338 #define krp_senddmastatus KREG_IBPORT_IDX(SendDmaStatus)
339 #define krp_senddmatail KREG_IBPORT_IDX(SendDmaTail)
340 #define krp_sendhdrsymptom KREG_IBPORT_IDX(SendHdrErrSymptom)
341 #define krp_sendslid KREG_IBPORT_IDX(SendIBSLIDAssign)
342 #define krp_sendslidmask KREG_IBPORT_IDX(SendIBSLIDMask)
343 #define krp_ibsdtestiftx KREG_IBPORT_IDX(IB_SDTEST_IF_TX)
344 #define krp_adapt_dis_timer KREG_IBPORT_IDX(ADAPT_DISABLE_TIMER_THRESHOLD)
345 #define krp_tx_deemph_override KREG_IBPORT_IDX(IBSD_TX_DEEMPHASIS_OVERRIDE)
346 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl)
347
348 /*
349 * Per-context kernel registers. Access only with qib_read_kreg_ctxt()
350 * or qib_write_kreg_ctxt()
351 */
352 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0)
353 #define krc_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
354
355 /*
356 * TID Flow table, per context. Reduces
357 * number of hdrq updates to one per flow (or on errors).
358 * context 0 and 1 share same memory, but have distinct
359 * addresses. Since for now, we never use expected sends
360 * on kernel contexts, we don't worry about that (we initialize
361 * those entries for ctxt 0/1 on driver load twice, for example).
362 */
363 #define NUM_TIDFLOWS_CTXT 0x20 /* 0x20 per context; have to hardcode */
364 #define ur_rcvflowtable (KREG_IDX(RcvTIDFlowTable0) - KREG_IDX(RcvHdrTail0))
365
366 /* these are the error bits in the tid flows, and are W1C */
367 #define TIDFLOW_ERRBITS ( \
368 (SYM_MASK(RcvTIDFlowTable0, GenMismatch) << \
369 SYM_LSB(RcvTIDFlowTable0, GenMismatch)) | \
370 (SYM_MASK(RcvTIDFlowTable0, SeqMismatch) << \
371 SYM_LSB(RcvTIDFlowTable0, SeqMismatch)))
372
373 /* Most (not all) Counters are per-IBport.
374 * Requires LBIntCnt is at offset 0 in the group
375 */
376 #define CREG_IDX(regname) \
377 ((QIB_7322_##regname##_0_OFFS - QIB_7322_LBIntCnt_OFFS) / sizeof(u64))
378
379 #define crp_badformat CREG_IDX(RxVersionErrCnt)
380 #define crp_err_rlen CREG_IDX(RxLenErrCnt)
381 #define crp_erricrc CREG_IDX(RxICRCErrCnt)
382 #define crp_errlink CREG_IDX(RxLinkMalformCnt)
383 #define crp_errlpcrc CREG_IDX(RxLPCRCErrCnt)
384 #define crp_errpkey CREG_IDX(RxPKeyMismatchCnt)
385 #define crp_errvcrc CREG_IDX(RxVCRCErrCnt)
386 #define crp_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt)
387 #define crp_iblinkdown CREG_IDX(IBLinkDownedCnt)
388 #define crp_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
389 #define crp_ibstatuschange CREG_IDX(IBStatusChangeCnt)
390 #define crp_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
391 #define crp_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
392 #define crp_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt)
393 #define crp_pktrcv CREG_IDX(RxDataPktCnt)
394 #define crp_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
395 #define crp_pktsend CREG_IDX(TxDataPktCnt)
396 #define crp_pktsendflow CREG_IDX(TxFlowPktCnt)
397 #define crp_psrcvdatacount CREG_IDX(PSRcvDataCount)
398 #define crp_psrcvpktscount CREG_IDX(PSRcvPktsCount)
399 #define crp_psxmitdatacount CREG_IDX(PSXmitDataCount)
400 #define crp_psxmitpktscount CREG_IDX(PSXmitPktsCount)
401 #define crp_psxmitwaitcount CREG_IDX(PSXmitWaitCount)
402 #define crp_rcvebp CREG_IDX(RxEBPCnt)
403 #define crp_rcvflowctrlviol CREG_IDX(RxFlowCtrlViolCnt)
404 #define crp_rcvovfl CREG_IDX(RxBufOvflCnt)
405 #define crp_rxdlidfltr CREG_IDX(RxDlidFltrCnt)
406 #define crp_rxdroppkt CREG_IDX(RxDroppedPktCnt)
407 #define crp_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt)
408 #define crp_rxqpinvalidctxt CREG_IDX(RxQPInvalidContextCnt)
409 #define crp_rxvlerr CREG_IDX(RxVlErrCnt)
410 #define crp_sendstall CREG_IDX(TxFlowStallCnt)
411 #define crp_txdroppedpkt CREG_IDX(TxDroppedPktCnt)
412 #define crp_txhdrerr CREG_IDX(TxHeadersErrCnt)
413 #define crp_txlenerr CREG_IDX(TxLenErrCnt)
414 #define crp_txminmaxlenerr CREG_IDX(TxMaxMinLenErrCnt)
415 #define crp_txsdmadesc CREG_IDX(TxSDmaDescCnt)
416 #define crp_txunderrun CREG_IDX(TxUnderrunCnt)
417 #define crp_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
418 #define crp_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt)
419 #define crp_wordrcv CREG_IDX(RxDwordCnt)
420 #define crp_wordsend CREG_IDX(TxDwordCnt)
421 #define crp_tx_creditstalls CREG_IDX(TxCreditUpToDateTimeOut)
422
423 /* these are the (few) counters that are not port-specific */
424 #define CREG_DEVIDX(regname) ((QIB_7322_##regname##_OFFS - \
425 QIB_7322_LBIntCnt_OFFS) / sizeof(u64))
426 #define cr_base_egrovfl CREG_DEVIDX(RxP0HdrEgrOvflCnt)
427 #define cr_lbint CREG_DEVIDX(LBIntCnt)
428 #define cr_lbstall CREG_DEVIDX(LBFlowStallCnt)
429 #define cr_pcieretrydiag CREG_DEVIDX(PcieRetryBufDiagQwordCnt)
430 #define cr_rxtidflowdrop CREG_DEVIDX(RxTidFlowDropCnt)
431 #define cr_tidfull CREG_DEVIDX(RxTIDFullErrCnt)
432 #define cr_tidinvalid CREG_DEVIDX(RxTIDValidErrCnt)
433
434 /* no chip register for # of IB ports supported, so define */
435 #define NUM_IB_PORTS 2
436
437 /* 1 VL15 buffer per hardware IB port, no register for this, so define */
438 #define NUM_VL15_BUFS NUM_IB_PORTS
439
440 /*
441 * context 0 and 1 are special, and there is no chip register that
442 * defines this value, so we have to define it here.
443 * These are all allocated to either 0 or 1 for single port
444 * hardware configuration, otherwise each gets half
445 */
446 #define KCTXT0_EGRCNT 2048
447
448 /* values for vl and port fields in PBC, 7322-specific */
449 #define PBC_PORT_SEL_LSB 26
450 #define PBC_PORT_SEL_RMASK 1
451 #define PBC_VL_NUM_LSB 27
452 #define PBC_VL_NUM_RMASK 7
453 #define PBC_7322_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */
454 #define PBC_7322_VL15_SEND_CTRL (1ULL << 31) /* control version of same */
455
456 static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
457 [IB_RATE_2_5_GBPS] = 16,
458 [IB_RATE_5_GBPS] = 8,
459 [IB_RATE_10_GBPS] = 4,
460 [IB_RATE_20_GBPS] = 2,
461 [IB_RATE_30_GBPS] = 2,
462 [IB_RATE_40_GBPS] = 1
463 };
464
465 #define IBA7322_LINKSPEED_SHIFT SYM_LSB(IBCStatusA_0, LinkSpeedActive)
466 #define IBA7322_LINKWIDTH_SHIFT SYM_LSB(IBCStatusA_0, LinkWidthActive)
467
468 /* link training states, from IBC */
469 #define IB_7322_LT_STATE_DISABLED 0x00
470 #define IB_7322_LT_STATE_LINKUP 0x01
471 #define IB_7322_LT_STATE_POLLACTIVE 0x02
472 #define IB_7322_LT_STATE_POLLQUIET 0x03
473 #define IB_7322_LT_STATE_SLEEPDELAY 0x04
474 #define IB_7322_LT_STATE_SLEEPQUIET 0x05
475 #define IB_7322_LT_STATE_CFGDEBOUNCE 0x08
476 #define IB_7322_LT_STATE_CFGRCVFCFG 0x09
477 #define IB_7322_LT_STATE_CFGWAITRMT 0x0a
478 #define IB_7322_LT_STATE_CFGIDLE 0x0b
479 #define IB_7322_LT_STATE_RECOVERRETRAIN 0x0c
480 #define IB_7322_LT_STATE_TXREVLANES 0x0d
481 #define IB_7322_LT_STATE_RECOVERWAITRMT 0x0e
482 #define IB_7322_LT_STATE_RECOVERIDLE 0x0f
483 #define IB_7322_LT_STATE_CFGENH 0x10
484 #define IB_7322_LT_STATE_CFGTEST 0x11
485 #define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12
486 #define IB_7322_LT_STATE_CFGWAITENH 0x13
487
488 /* link state machine states from IBC */
489 #define IB_7322_L_STATE_DOWN 0x0
490 #define IB_7322_L_STATE_INIT 0x1
491 #define IB_7322_L_STATE_ARM 0x2
492 #define IB_7322_L_STATE_ACTIVE 0x3
493 #define IB_7322_L_STATE_ACT_DEFER 0x4
494
495 static const u8 qib_7322_physportstate[0x20] = {
496 [IB_7322_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
497 [IB_7322_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
498 [IB_7322_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
499 [IB_7322_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
500 [IB_7322_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
501 [IB_7322_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
502 [IB_7322_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN,
503 [IB_7322_LT_STATE_CFGRCVFCFG] =
504 IB_PHYSPORTSTATE_CFG_TRAIN,
505 [IB_7322_LT_STATE_CFGWAITRMT] =
506 IB_PHYSPORTSTATE_CFG_TRAIN,
507 [IB_7322_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_IDLE,
508 [IB_7322_LT_STATE_RECOVERRETRAIN] =
509 IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
510 [IB_7322_LT_STATE_RECOVERWAITRMT] =
511 IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
512 [IB_7322_LT_STATE_RECOVERIDLE] =
513 IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
514 [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
515 [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
516 [IB_7322_LT_STATE_CFGWAITRMTTEST] =
517 IB_PHYSPORTSTATE_CFG_TRAIN,
518 [IB_7322_LT_STATE_CFGWAITENH] =
519 IB_PHYSPORTSTATE_CFG_WAIT_ENH,
520 [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
521 [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
522 [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
523 [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
524 };
525
526 #ifdef CONFIG_INFINIBAND_QIB_DCA
527 struct qib_irq_notify {
528 int rcv;
529 void *arg;
530 struct irq_affinity_notify notify;
531 };
532 #endif
533
534 struct qib_chip_specific {
535 u64 __iomem *cregbase;
536 u64 *cntrs;
537 spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */
538 spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */
539 u64 main_int_mask; /* clear bits which have dedicated handlers */
540 u64 int_enable_mask; /* for per port interrupts in single port mode */
541 u64 errormask;
542 u64 hwerrmask;
543 u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */
544 u64 gpio_mask; /* shadow the gpio mask register */
545 u64 extctrl; /* shadow the gpio output enable, etc... */
546 u32 ncntrs;
547 u32 nportcntrs;
548 u32 cntrnamelen;
549 u32 portcntrnamelen;
550 u32 numctxts;
551 u32 rcvegrcnt;
552 u32 updthresh; /* current AvailUpdThld */
553 u32 updthresh_dflt; /* default AvailUpdThld */
554 u32 r1;
555 int irq;
556 u32 num_msix_entries;
557 u32 sdmabufcnt;
558 u32 lastbuf_for_pio;
559 u32 stay_in_freeze;
560 u32 recovery_ports_initted;
561 #ifdef CONFIG_INFINIBAND_QIB_DCA
562 u32 dca_ctrl;
563 int rhdr_cpu[18];
564 int sdma_cpu[2];
565 u64 dca_rcvhdr_ctrl[5]; /* B, C, D, E, F */
566 #endif
567 struct qib_msix_entry *msix_entries;
568 unsigned long *sendchkenable;
569 unsigned long *sendgrhchk;
570 unsigned long *sendibchk;
571 u32 rcvavail_timeout[18];
572 char emsgbuf[128]; /* for device error interrupt msg buffer */
573 };
574
575 /* Table of entries in "human readable" form Tx Emphasis. */
576 struct txdds_ent {
577 u8 amp;
578 u8 pre;
579 u8 main;
580 u8 post;
581 };
582
583 struct vendor_txdds_ent {
584 u8 oui[QSFP_VOUI_LEN];
585 u8 *partnum;
586 struct txdds_ent sdr;
587 struct txdds_ent ddr;
588 struct txdds_ent qdr;
589 };
590
591 static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
592
593 #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
594 #define TXDDS_EXTRA_SZ 18 /* number of extra tx settings entries */
595 #define TXDDS_MFG_SZ 2 /* number of mfg tx settings entries */
596 #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
597
598 #define H1_FORCE_VAL 8
599 #define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */
600 #define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */
601
602 /* The static and dynamic registers are paired, and the pairs indexed by spd */
603 #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \
604 + ((spd) * 2))
605
606 #define QDR_DFE_DISABLE_DELAY 4000 /* msec after LINKUP */
607 #define QDR_STATIC_ADAPT_DOWN 0xf0f0f0f0ULL /* link down, H1-H4 QDR adapts */
608 #define QDR_STATIC_ADAPT_DOWN_R1 0ULL /* r1 link down, H1-H4 QDR adapts */
609 #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */
610 #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */
611
612 struct qib_chippport_specific {
613 u64 __iomem *kpregbase;
614 u64 __iomem *cpregbase;
615 u64 *portcntrs;
616 struct qib_pportdata *ppd;
617 wait_queue_head_t autoneg_wait;
618 struct delayed_work autoneg_work;
619 struct delayed_work ipg_work;
620 struct timer_list chase_timer;
621 /*
622 * these 5 fields are used to establish deltas for IB symbol
623 * errors and linkrecovery errors. They can be reported on
624 * some chips during link negotiation prior to INIT, and with
625 * DDR when faking DDR negotiations with non-IBTA switches.
626 * The chip counters are adjusted at driver unload if there is
627 * a non-zero delta.
628 */
629 u64 ibdeltainprog;
630 u64 ibsymdelta;
631 u64 ibsymsnap;
632 u64 iblnkerrdelta;
633 u64 iblnkerrsnap;
634 u64 iblnkdownsnap;
635 u64 iblnkdowndelta;
636 u64 ibmalfdelta;
637 u64 ibmalfsnap;
638 u64 ibcctrl_a; /* krp_ibcctrl_a shadow */
639 u64 ibcctrl_b; /* krp_ibcctrl_b shadow */
640 unsigned long qdr_dfe_time;
641 unsigned long chase_end;
642 u32 autoneg_tries;
643 u32 recovery_init;
644 u32 qdr_dfe_on;
645 u32 qdr_reforce;
646 /*
647 * Per-bay per-channel rcv QMH H1 values and Tx values for QDR.
648 * entry zero is unused, to simplify indexing
649 */
650 u8 h1_val;
651 u8 no_eep; /* txselect table index to use if no qsfp info */
652 u8 ipg_tries;
653 u8 ibmalfusesnap;
654 struct qib_qsfp_data qsfp_data;
655 char epmsgbuf[192]; /* for port error interrupt msg buffer */
656 char sdmamsgbuf[192]; /* for per-port sdma error messages */
657 };
658
659 static struct {
660 const char *name;
661 irq_handler_t handler;
662 int lsb;
663 int port; /* 0 if not port-specific, else port # */
664 int dca;
665 } irq_table[] = {
666 { "", qib_7322intr, -1, 0, 0 },
667 { " (buf avail)", qib_7322bufavail,
668 SYM_LSB(IntStatus, SendBufAvail), 0, 0},
669 { " (sdma 0)", sdma_intr,
670 SYM_LSB(IntStatus, SDmaInt_0), 1, 1 },
671 { " (sdma 1)", sdma_intr,
672 SYM_LSB(IntStatus, SDmaInt_1), 2, 1 },
673 { " (sdmaI 0)", sdma_idle_intr,
674 SYM_LSB(IntStatus, SDmaIdleInt_0), 1, 1},
675 { " (sdmaI 1)", sdma_idle_intr,
676 SYM_LSB(IntStatus, SDmaIdleInt_1), 2, 1},
677 { " (sdmaP 0)", sdma_progress_intr,
678 SYM_LSB(IntStatus, SDmaProgressInt_0), 1, 1 },
679 { " (sdmaP 1)", sdma_progress_intr,
680 SYM_LSB(IntStatus, SDmaProgressInt_1), 2, 1 },
681 { " (sdmaC 0)", sdma_cleanup_intr,
682 SYM_LSB(IntStatus, SDmaCleanupDone_0), 1, 0 },
683 { " (sdmaC 1)", sdma_cleanup_intr,
684 SYM_LSB(IntStatus, SDmaCleanupDone_1), 2 , 0},
685 };
686
687 #ifdef CONFIG_INFINIBAND_QIB_DCA
688
689 static const struct dca_reg_map {
690 int shadow_inx;
691 int lsb;
692 u64 mask;
693 u16 regno;
694 } dca_rcvhdr_reg_map[] = {
695 { 0, SYM_LSB(DCACtrlB, RcvHdrq0DCAOPH),
696 ~SYM_MASK(DCACtrlB, RcvHdrq0DCAOPH) , KREG_IDX(DCACtrlB) },
697 { 0, SYM_LSB(DCACtrlB, RcvHdrq1DCAOPH),
698 ~SYM_MASK(DCACtrlB, RcvHdrq1DCAOPH) , KREG_IDX(DCACtrlB) },
699 { 0, SYM_LSB(DCACtrlB, RcvHdrq2DCAOPH),
700 ~SYM_MASK(DCACtrlB, RcvHdrq2DCAOPH) , KREG_IDX(DCACtrlB) },
701 { 0, SYM_LSB(DCACtrlB, RcvHdrq3DCAOPH),
702 ~SYM_MASK(DCACtrlB, RcvHdrq3DCAOPH) , KREG_IDX(DCACtrlB) },
703 { 1, SYM_LSB(DCACtrlC, RcvHdrq4DCAOPH),
704 ~SYM_MASK(DCACtrlC, RcvHdrq4DCAOPH) , KREG_IDX(DCACtrlC) },
705 { 1, SYM_LSB(DCACtrlC, RcvHdrq5DCAOPH),
706 ~SYM_MASK(DCACtrlC, RcvHdrq5DCAOPH) , KREG_IDX(DCACtrlC) },
707 { 1, SYM_LSB(DCACtrlC, RcvHdrq6DCAOPH),
708 ~SYM_MASK(DCACtrlC, RcvHdrq6DCAOPH) , KREG_IDX(DCACtrlC) },
709 { 1, SYM_LSB(DCACtrlC, RcvHdrq7DCAOPH),
710 ~SYM_MASK(DCACtrlC, RcvHdrq7DCAOPH) , KREG_IDX(DCACtrlC) },
711 { 2, SYM_LSB(DCACtrlD, RcvHdrq8DCAOPH),
712 ~SYM_MASK(DCACtrlD, RcvHdrq8DCAOPH) , KREG_IDX(DCACtrlD) },
713 { 2, SYM_LSB(DCACtrlD, RcvHdrq9DCAOPH),
714 ~SYM_MASK(DCACtrlD, RcvHdrq9DCAOPH) , KREG_IDX(DCACtrlD) },
715 { 2, SYM_LSB(DCACtrlD, RcvHdrq10DCAOPH),
716 ~SYM_MASK(DCACtrlD, RcvHdrq10DCAOPH) , KREG_IDX(DCACtrlD) },
717 { 2, SYM_LSB(DCACtrlD, RcvHdrq11DCAOPH),
718 ~SYM_MASK(DCACtrlD, RcvHdrq11DCAOPH) , KREG_IDX(DCACtrlD) },
719 { 3, SYM_LSB(DCACtrlE, RcvHdrq12DCAOPH),
720 ~SYM_MASK(DCACtrlE, RcvHdrq12DCAOPH) , KREG_IDX(DCACtrlE) },
721 { 3, SYM_LSB(DCACtrlE, RcvHdrq13DCAOPH),
722 ~SYM_MASK(DCACtrlE, RcvHdrq13DCAOPH) , KREG_IDX(DCACtrlE) },
723 { 3, SYM_LSB(DCACtrlE, RcvHdrq14DCAOPH),
724 ~SYM_MASK(DCACtrlE, RcvHdrq14DCAOPH) , KREG_IDX(DCACtrlE) },
725 { 3, SYM_LSB(DCACtrlE, RcvHdrq15DCAOPH),
726 ~SYM_MASK(DCACtrlE, RcvHdrq15DCAOPH) , KREG_IDX(DCACtrlE) },
727 { 4, SYM_LSB(DCACtrlF, RcvHdrq16DCAOPH),
728 ~SYM_MASK(DCACtrlF, RcvHdrq16DCAOPH) , KREG_IDX(DCACtrlF) },
729 { 4, SYM_LSB(DCACtrlF, RcvHdrq17DCAOPH),
730 ~SYM_MASK(DCACtrlF, RcvHdrq17DCAOPH) , KREG_IDX(DCACtrlF) },
731 };
732 #endif
733
734 /* ibcctrl bits */
735 #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
736 /* cycle through TS1/TS2 till OK */
737 #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
738 /* wait for TS1, then go on */
739 #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
740 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
741
742 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
743 #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
744 #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
745
746 #define BLOB_7322_IBCHG 0x101
747
748 static inline void qib_write_kreg(const struct qib_devdata *dd,
749 const u32 regno, u64 value);
750 static inline u32 qib_read_kreg32(const struct qib_devdata *, const u32);
751 static void write_7322_initregs(struct qib_devdata *);
752 static void write_7322_init_portregs(struct qib_pportdata *);
753 static void setup_7322_link_recovery(struct qib_pportdata *, u32);
754 static void check_7322_rxe_status(struct qib_pportdata *);
755 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *);
756 #ifdef CONFIG_INFINIBAND_QIB_DCA
757 static void qib_setup_dca(struct qib_devdata *dd);
758 static void setup_dca_notifier(struct qib_devdata *dd,
759 struct qib_msix_entry *m);
760 static void reset_dca_notifier(struct qib_devdata *dd,
761 struct qib_msix_entry *m);
762 #endif
763
764 /**
765 * qib_read_ureg32 - read 32-bit virtualized per-context register
766 * @dd: device
767 * @regno: register number
768 * @ctxt: context number
769 *
770 * Return the contents of a register that is virtualized to be per context.
771 * Returns -1 on errors (not distinguishable from valid contents at
772 * runtime; we may add a separate error variable at some point).
773 */
774 static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
775 enum qib_ureg regno, int ctxt)
776 {
777 if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
778 return 0;
779 return readl(regno + (u64 __iomem *)(
780 (dd->ureg_align * ctxt) + (dd->userbase ?
781 (char __iomem *)dd->userbase :
782 (char __iomem *)dd->kregbase + dd->uregbase)));
783 }
784
785 /**
786 * qib_read_ureg - read virtualized per-context register
787 * @dd: device
788 * @regno: register number
789 * @ctxt: context number
790 *
791 * Return the contents of a register that is virtualized to be per context.
792 * Returns -1 on errors (not distinguishable from valid contents at
793 * runtime; we may add a separate error variable at some point).
794 */
795 static inline u64 qib_read_ureg(const struct qib_devdata *dd,
796 enum qib_ureg regno, int ctxt)
797 {
798
799 if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
800 return 0;
801 return readq(regno + (u64 __iomem *)(
802 (dd->ureg_align * ctxt) + (dd->userbase ?
803 (char __iomem *)dd->userbase :
804 (char __iomem *)dd->kregbase + dd->uregbase)));
805 }
806
807 /**
808 * qib_write_ureg - write virtualized per-context register
809 * @dd: device
810 * @regno: register number
811 * @value: value
812 * @ctxt: context
813 *
814 * Write the contents of a register that is virtualized to be per context.
815 */
816 static inline void qib_write_ureg(const struct qib_devdata *dd,
817 enum qib_ureg regno, u64 value, int ctxt)
818 {
819 u64 __iomem *ubase;
820 if (dd->userbase)
821 ubase = (u64 __iomem *)
822 ((char __iomem *) dd->userbase +
823 dd->ureg_align * ctxt);
824 else
825 ubase = (u64 __iomem *)
826 (dd->uregbase +
827 (char __iomem *) dd->kregbase +
828 dd->ureg_align * ctxt);
829
830 if (dd->kregbase && (dd->flags & QIB_PRESENT))
831 writeq(value, &ubase[regno]);
832 }
833
834 static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
835 const u32 regno)
836 {
837 if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
838 return -1;
839 return readl((u32 __iomem *) &dd->kregbase[regno]);
840 }
841
842 static inline u64 qib_read_kreg64(const struct qib_devdata *dd,
843 const u32 regno)
844 {
845 if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
846 return -1;
847 return readq(&dd->kregbase[regno]);
848 }
849
850 static inline void qib_write_kreg(const struct qib_devdata *dd,
851 const u32 regno, u64 value)
852 {
853 if (dd->kregbase && (dd->flags & QIB_PRESENT))
854 writeq(value, &dd->kregbase[regno]);
855 }
856
857 /*
858 * not many sanity checks for the port-specific kernel register routines,
859 * since they are only used when it's known to be safe.
860 */
861 static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd,
862 const u16 regno)
863 {
864 if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT))
865 return 0ULL;
866 return readq(&ppd->cpspec->kpregbase[regno]);
867 }
868
869 static inline void qib_write_kreg_port(const struct qib_pportdata *ppd,
870 const u16 regno, u64 value)
871 {
872 if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase &&
873 (ppd->dd->flags & QIB_PRESENT))
874 writeq(value, &ppd->cpspec->kpregbase[regno]);
875 }
876
877 /**
878 * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
879 * @dd: the qlogic_ib device
880 * @regno: the register number to write
881 * @ctxt: the context containing the register
882 * @value: the value to write
883 */
884 static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
885 const u16 regno, unsigned ctxt,
886 u64 value)
887 {
888 qib_write_kreg(dd, regno + ctxt, value);
889 }
890
891 static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno)
892 {
893 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
894 return 0;
895 return readq(&dd->cspec->cregbase[regno]);
896
897
898 }
899
900 static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno)
901 {
902 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
903 return 0;
904 return readl(&dd->cspec->cregbase[regno]);
905
906
907 }
908
909 static inline void write_7322_creg_port(const struct qib_pportdata *ppd,
910 u16 regno, u64 value)
911 {
912 if (ppd->cpspec && ppd->cpspec->cpregbase &&
913 (ppd->dd->flags & QIB_PRESENT))
914 writeq(value, &ppd->cpspec->cpregbase[regno]);
915 }
916
917 static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd,
918 u16 regno)
919 {
920 if (!ppd->cpspec || !ppd->cpspec->cpregbase ||
921 !(ppd->dd->flags & QIB_PRESENT))
922 return 0;
923 return readq(&ppd->cpspec->cpregbase[regno]);
924 }
925
926 static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd,
927 u16 regno)
928 {
929 if (!ppd->cpspec || !ppd->cpspec->cpregbase ||
930 !(ppd->dd->flags & QIB_PRESENT))
931 return 0;
932 return readl(&ppd->cpspec->cpregbase[regno]);
933 }
934
935 /* bits in Control register */
936 #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset)
937 #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn)
938
939 /* bits in general interrupt regs */
940 #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask)
941 #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17)
942 #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB)
943 #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask)
944 #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17)
945 #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB)
946 #define QIB_I_C_ERROR INT_MASK(Err)
947
948 #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1))
949 #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail)
950 #define QIB_I_GPIO INT_MASK(AssertGPIO)
951 #define QIB_I_P_SDMAINT(pidx) \
952 (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \
953 INT_MASK_P(SDmaProgress, pidx) | \
954 INT_MASK_PM(SDmaCleanupDone, pidx))
955
956 /* Interrupt bits that are "per port" */
957 #define QIB_I_P_BITSEXTANT(pidx) \
958 (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \
959 INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \
960 INT_MASK_P(SDmaProgress, pidx) | \
961 INT_MASK_PM(SDmaCleanupDone, pidx))
962
963 /* Interrupt bits that are common to a device */
964 /* currently unused: QIB_I_SPIOSENT */
965 #define QIB_I_C_BITSEXTANT \
966 (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \
967 QIB_I_SPIOSENT | \
968 QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO)
969
970 #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \
971 QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1))
972
973 /*
974 * Error bits that are "per port".
975 */
976 #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged)
977 #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr)
978 #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr)
979 #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr)
980 #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr)
981 #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr)
982 #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr)
983 #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr)
984 #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr)
985 #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr)
986 #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr)
987 #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr)
988 #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr)
989 #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr)
990 #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr)
991 #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr)
992 #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr)
993 #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr)
994 #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr)
995 #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr)
996 #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr)
997 #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr)
998 #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr)
999 #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr)
1000 #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr)
1001 #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr)
1002 #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr)
1003 #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr)
1004
1005 #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr)
1006 #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr)
1007 #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr)
1008 #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr)
1009 #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr)
1010 #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr)
1011 #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr)
1012 #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr)
1013 #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr)
1014 #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr)
1015 #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr)
1016
1017 /* Error bits that are common to a device */
1018 #define QIB_E_RESET ERR_MASK(ResetNegated)
1019 #define QIB_E_HARDWARE ERR_MASK(HardwareErr)
1020 #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr)
1021
1022
1023 /*
1024 * Per chip (rather than per-port) errors. Most either do
1025 * nothing but trigger a print (because they self-recover, or
1026 * always occur in tandem with other errors that handle the
1027 * issue), or because they indicate errors with no recovery,
1028 * but we want to know that they happened.
1029 */
1030 #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr)
1031 #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd)
1032 #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr)
1033 #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr)
1034 #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr)
1035 #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr)
1036 #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr)
1037 #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr)
1038
1039 /* SDMA chip errors (not per port)
1040 * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get
1041 * the SDMAHALT error immediately, so we just print the dup error via the
1042 * E_AUTO mechanism. This is true of most of the per-port fatal errors
1043 * as well, but since this is port-independent, by definition, it's
1044 * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per
1045 * packet send errors, and so are handled in the same manner as other
1046 * per-packet errors.
1047 */
1048 #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err)
1049 #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr)
1050 #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr)
1051
1052 /*
1053 * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS
1054 * it is used to print "common" packet errors.
1055 */
1056 #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\
1057 QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\
1058 QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\
1059 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \
1060 QIB_E_P_REBP)
1061
1062 /* Error Bits that Packet-related (Receive, per-port) */
1063 #define QIB_E_P_RPKTERRS (\
1064 QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \
1065 QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \
1066 QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\
1067 QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \
1068 QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \
1069 QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP)
1070
1071 /*
1072 * Error bits that are Send-related (per port)
1073 * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling).
1074 * All of these potentially need to have a buffer disarmed
1075 */
1076 #define QIB_E_P_SPKTERRS (\
1077 QIB_E_P_SUNEXP_PKTNUM |\
1078 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\
1079 QIB_E_P_SMAXPKTLEN |\
1080 QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \
1081 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \
1082 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL)
1083
1084 #define QIB_E_SPKTERRS ( \
1085 QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \
1086 ERR_MASK_N(SendUnsupportedVLErr) | \
1087 QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT)
1088
1089 #define QIB_E_P_SDMAERRS ( \
1090 QIB_E_P_SDMAHALT | \
1091 QIB_E_P_SDMADESCADDRMISALIGN | \
1092 QIB_E_P_SDMAUNEXPDATA | \
1093 QIB_E_P_SDMAMISSINGDW | \
1094 QIB_E_P_SDMADWEN | \
1095 QIB_E_P_SDMARPYTAG | \
1096 QIB_E_P_SDMA1STDESC | \
1097 QIB_E_P_SDMABASE | \
1098 QIB_E_P_SDMATAILOUTOFBOUND | \
1099 QIB_E_P_SDMAOUTOFBOUND | \
1100 QIB_E_P_SDMAGENMISMATCH)
1101
1102 /*
1103 * This sets some bits more than once, but makes it more obvious which
1104 * bits are not handled under other categories, and the repeat definition
1105 * is not a problem.
1106 */
1107 #define QIB_E_P_BITSEXTANT ( \
1108 QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \
1109 QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \
1110 QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \
1111 QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \
1112 )
1113
1114 /*
1115 * These are errors that can occur when the link
1116 * changes state while a packet is being sent or received. This doesn't
1117 * cover things like EBP or VCRC that can be the result of a sending
1118 * having the link change state, so we receive a "known bad" packet.
1119 * All of these are "per port", so renamed:
1120 */
1121 #define QIB_E_P_LINK_PKTERRS (\
1122 QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\
1123 QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\
1124 QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\
1125 QIB_E_P_RUNEXPCHAR)
1126
1127 /*
1128 * This sets some bits more than once, but makes it more obvious which
1129 * bits are not handled under other categories (such as QIB_E_SPKTERRS),
1130 * and the repeat definition is not a problem.
1131 */
1132 #define QIB_E_C_BITSEXTANT (\
1133 QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\
1134 QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\
1135 QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE)
1136
1137 /* Likewise Neuter E_SPKT_ERRS_IGNORE */
1138 #define E_SPKT_ERRS_IGNORE 0
1139
1140 #define QIB_EXTS_MEMBIST_DISABLED \
1141 SYM_MASK(EXTStatus, MemBISTDisabled)
1142 #define QIB_EXTS_MEMBIST_ENDTEST \
1143 SYM_MASK(EXTStatus, MemBISTEndTest)
1144
1145 #define QIB_E_SPIOARMLAUNCH \
1146 ERR_MASK(SendArmLaunchErr)
1147
1148 #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd)
1149 #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd)
1150
1151 /*
1152 * IBTA_1_2 is set when multiple speeds are enabled (normal),
1153 * and also if forced QDR (only QDR enabled). It's enabled for the
1154 * forced QDR case so that scrambling will be enabled by the TS3
1155 * exchange, when supported by both sides of the link.
1156 */
1157 #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE)
1158 #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED)
1159 #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)
1160 #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR)
1161 #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR)
1162 #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \
1163 SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR))
1164 #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR)
1165
1166 #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod)
1167 #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod)
1168
1169 #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS)
1170 #define IBA7322_IBC_WIDTH_4X_ONLY (1<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS))
1171 #define IBA7322_IBC_WIDTH_1X_ONLY (0<<SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS))
1172
1173 #define IBA7322_IBC_RXPOL_MASK SYM_MASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP)
1174 #define IBA7322_IBC_RXPOL_LSB SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP)
1175 #define IBA7322_IBC_HRTBT_MASK (SYM_MASK(IBCCtrlB_0, HRTBT_AUTO) | \
1176 SYM_MASK(IBCCtrlB_0, HRTBT_ENB))
1177 #define IBA7322_IBC_HRTBT_RMASK (IBA7322_IBC_HRTBT_MASK >> \
1178 SYM_LSB(IBCCtrlB_0, HRTBT_ENB))
1179 #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB)
1180
1181 #define IBA7322_REDIRECT_VEC_PER_REG 12
1182
1183 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En)
1184 #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En)
1185 #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En)
1186 #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En)
1187 #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En)
1188
1189 #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */
1190
1191 #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \
1192 .msg = #fldname , .sz = sizeof(#fldname) }
1193 #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \
1194 fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) }
1195 static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = {
1196 HWE_AUTO_P(IBSerdesPClkNotDetect, 1),
1197 HWE_AUTO_P(IBSerdesPClkNotDetect, 0),
1198 HWE_AUTO(PCIESerdesPClkNotDetect),
1199 HWE_AUTO(PowerOnBISTFailed),
1200 HWE_AUTO(TempsenseTholdReached),
1201 HWE_AUTO(MemoryErr),
1202 HWE_AUTO(PCIeBusParityErr),
1203 HWE_AUTO(PcieCplTimeout),
1204 HWE_AUTO(PciePoisonedTLP),
1205 HWE_AUTO_P(SDmaMemReadErr, 1),
1206 HWE_AUTO_P(SDmaMemReadErr, 0),
1207 HWE_AUTO_P(IBCBusFromSPCParityErr, 1),
1208 HWE_AUTO_P(IBCBusToSPCParityErr, 1),
1209 HWE_AUTO_P(IBCBusFromSPCParityErr, 0),
1210 HWE_AUTO(statusValidNoEop),
1211 HWE_AUTO(LATriggered),
1212 { .mask = 0, .sz = 0 }
1213 };
1214
1215 #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \
1216 .msg = #fldname, .sz = sizeof(#fldname) }
1217 #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \
1218 .msg = #fldname, .sz = sizeof(#fldname) }
1219 static const struct qib_hwerror_msgs qib_7322error_msgs[] = {
1220 E_AUTO(RcvEgrFullErr),
1221 E_AUTO(RcvHdrFullErr),
1222 E_AUTO(ResetNegated),
1223 E_AUTO(HardwareErr),
1224 E_AUTO(InvalidAddrErr),
1225 E_AUTO(SDmaVL15Err),
1226 E_AUTO(SBufVL15MisUseErr),
1227 E_AUTO(InvalidEEPCmd),
1228 E_AUTO(RcvContextShareErr),
1229 E_AUTO(SendVLMismatchErr),
1230 E_AUTO(SendArmLaunchErr),
1231 E_AUTO(SendSpecialTriggerErr),
1232 E_AUTO(SDmaWrongPortErr),
1233 E_AUTO(SDmaBufMaskDuplicateErr),
1234 { .mask = 0, .sz = 0 }
1235 };
1236
1237 static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = {
1238 E_P_AUTO(IBStatusChanged),
1239 E_P_AUTO(SHeadersErr),
1240 E_P_AUTO(VL15BufMisuseErr),
1241 /*
1242 * SDmaHaltErr is not really an error, make it clearer;
1243 */
1244 {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted",
1245 .sz = 11},
1246 E_P_AUTO(SDmaDescAddrMisalignErr),
1247 E_P_AUTO(SDmaUnexpDataErr),
1248 E_P_AUTO(SDmaMissingDwErr),
1249 E_P_AUTO(SDmaDwEnErr),
1250 E_P_AUTO(SDmaRpyTagErr),
1251 E_P_AUTO(SDma1stDescErr),
1252 E_P_AUTO(SDmaBaseErr),
1253 E_P_AUTO(SDmaTailOutOfBoundErr),
1254 E_P_AUTO(SDmaOutOfBoundErr),
1255 E_P_AUTO(SDmaGenMismatchErr),
1256 E_P_AUTO(SendBufMisuseErr),
1257 E_P_AUTO(SendUnsupportedVLErr),
1258 E_P_AUTO(SendUnexpectedPktNumErr),
1259 E_P_AUTO(SendDroppedDataPktErr),
1260 E_P_AUTO(SendDroppedSmpPktErr),
1261 E_P_AUTO(SendPktLenErr),
1262 E_P_AUTO(SendUnderRunErr),
1263 E_P_AUTO(SendMaxPktLenErr),
1264 E_P_AUTO(SendMinPktLenErr),
1265 E_P_AUTO(RcvIBLostLinkErr),
1266 E_P_AUTO(RcvHdrErr),
1267 E_P_AUTO(RcvHdrLenErr),
1268 E_P_AUTO(RcvBadTidErr),
1269 E_P_AUTO(RcvBadVersionErr),
1270 E_P_AUTO(RcvIBFlowErr),
1271 E_P_AUTO(RcvEBPErr),
1272 E_P_AUTO(RcvUnsupportedVLErr),
1273 E_P_AUTO(RcvUnexpectedCharErr),
1274 E_P_AUTO(RcvShortPktLenErr),
1275 E_P_AUTO(RcvLongPktLenErr),
1276 E_P_AUTO(RcvMaxPktLenErr),
1277 E_P_AUTO(RcvMinPktLenErr),
1278 E_P_AUTO(RcvICRCErr),
1279 E_P_AUTO(RcvVCRCErr),
1280 E_P_AUTO(RcvFormatErr),
1281 { .mask = 0, .sz = 0 }
1282 };
1283
1284 /*
1285 * Below generates "auto-message" for interrupts not specific to any port or
1286 * context
1287 */
1288 #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \
1289 .msg = #fldname, .sz = sizeof(#fldname) }
1290 /* Below generates "auto-message" for interrupts specific to a port */
1291 #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\
1292 SYM_LSB(IntMask, fldname##Mask##_0), \
1293 SYM_LSB(IntMask, fldname##Mask##_1)), \
1294 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") }
1295 /* For some reason, the SerDesTrimDone bits are reversed */
1296 #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\
1297 SYM_LSB(IntMask, fldname##Mask##_1), \
1298 SYM_LSB(IntMask, fldname##Mask##_0)), \
1299 .msg = #fldname "_P", .sz = sizeof(#fldname "_P") }
1300 /*
1301 * Below generates "auto-message" for interrupts specific to a context,
1302 * with ctxt-number appended
1303 */
1304 #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\
1305 SYM_LSB(IntMask, fldname##0IntMask), \
1306 SYM_LSB(IntMask, fldname##17IntMask)), \
1307 .msg = #fldname "_C", .sz = sizeof(#fldname "_C") }
1308
1309 static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = {
1310 INTR_AUTO_P(SDmaInt),
1311 INTR_AUTO_P(SDmaProgressInt),
1312 INTR_AUTO_P(SDmaIdleInt),
1313 INTR_AUTO_P(SDmaCleanupDone),
1314 INTR_AUTO_C(RcvUrg),
1315 INTR_AUTO_P(ErrInt),
1316 INTR_AUTO(ErrInt), /* non-port-specific errs */
1317 INTR_AUTO(AssertGPIOInt),
1318 INTR_AUTO_P(SendDoneInt),
1319 INTR_AUTO(SendBufAvailInt),
1320 INTR_AUTO_C(RcvAvail),
1321 { .mask = 0, .sz = 0 }
1322 };
1323
1324 #define TXSYMPTOM_AUTO_P(fldname) \
1325 { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \
1326 .msg = #fldname, .sz = sizeof(#fldname) }
1327 static const struct qib_hwerror_msgs hdrchk_msgs[] = {
1328 TXSYMPTOM_AUTO_P(NonKeyPacket),
1329 TXSYMPTOM_AUTO_P(GRHFail),
1330 TXSYMPTOM_AUTO_P(PkeyFail),
1331 TXSYMPTOM_AUTO_P(QPFail),
1332 TXSYMPTOM_AUTO_P(SLIDFail),
1333 TXSYMPTOM_AUTO_P(RawIPV6),
1334 TXSYMPTOM_AUTO_P(PacketTooSmall),
1335 { .mask = 0, .sz = 0 }
1336 };
1337
1338 #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
1339
1340 /*
1341 * Called when we might have an error that is specific to a particular
1342 * PIO buffer, and may need to cancel that buffer, so it can be re-used,
1343 * because we don't need to force the update of pioavail
1344 */
1345 static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd)
1346 {
1347 struct qib_devdata *dd = ppd->dd;
1348 u32 i;
1349 int any;
1350 u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
1351 u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG;
1352 unsigned long sbuf[4];
1353
1354 /*
1355 * It's possible that sendbuffererror could have bits set; might
1356 * have already done this as a result of hardware error handling.
1357 */
1358 any = 0;
1359 for (i = 0; i < regcnt; ++i) {
1360 sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i);
1361 if (sbuf[i]) {
1362 any = 1;
1363 qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]);
1364 }
1365 }
1366
1367 if (any)
1368 qib_disarm_piobufs_set(dd, sbuf, piobcnt);
1369 }
1370
1371 /* No txe_recover yet, if ever */
1372
1373 /* No decode__errors yet */
1374 static void err_decode(char *msg, size_t len, u64 errs,
1375 const struct qib_hwerror_msgs *msp)
1376 {
1377 u64 these, lmask;
1378 int took, multi, n = 0;
1379
1380 while (errs && msp && msp->mask) {
1381 multi = (msp->mask & (msp->mask - 1));
1382 while (errs & msp->mask) {
1383 these = (errs & msp->mask);
1384 lmask = (these & (these - 1)) ^ these;
1385 if (len) {
1386 if (n++) {
1387 /* separate the strings */
1388 *msg++ = ',';
1389 len--;
1390 }
1391 BUG_ON(!msp->sz);
1392 /* msp->sz counts the nul */
1393 took = min_t(size_t, msp->sz - (size_t)1, len);
1394 memcpy(msg, msp->msg, took);
1395 len -= took;
1396 msg += took;
1397 if (len)
1398 *msg = '\0';
1399 }
1400 errs &= ~lmask;
1401 if (len && multi) {
1402 /* More than one bit this mask */
1403 int idx = -1;
1404
1405 while (lmask & msp->mask) {
1406 ++idx;
1407 lmask >>= 1;
1408 }
1409 took = scnprintf(msg, len, "_%d", idx);
1410 len -= took;
1411 msg += took;
1412 }
1413 }
1414 ++msp;
1415 }
1416 /* If some bits are left, show in hex. */
1417 if (len && errs)
1418 snprintf(msg, len, "%sMORE:%llX", n ? "," : "",
1419 (unsigned long long) errs);
1420 }
1421
1422 /* only called if r1 set */
1423 static void flush_fifo(struct qib_pportdata *ppd)
1424 {
1425 struct qib_devdata *dd = ppd->dd;
1426 u32 __iomem *piobuf;
1427 u32 bufn;
1428 u32 *hdr;
1429 u64 pbc;
1430 const unsigned hdrwords = 7;
1431 static struct qib_ib_header ibhdr = {
1432 .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH),
1433 .lrh[1] = IB_LID_PERMISSIVE,
1434 .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC),
1435 .lrh[3] = IB_LID_PERMISSIVE,
1436 .u.oth.bth[0] = cpu_to_be32(
1437 (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY),
1438 .u.oth.bth[1] = cpu_to_be32(0),
1439 .u.oth.bth[2] = cpu_to_be32(0),
1440 .u.oth.u.ud.deth[0] = cpu_to_be32(0),
1441 .u.oth.u.ud.deth[1] = cpu_to_be32(0),
1442 };
1443
1444 /*
1445 * Send a dummy VL15 packet to flush the launch FIFO.
1446 * This will not actually be sent since the TxeBypassIbc bit is set.
1447 */
1448 pbc = PBC_7322_VL15_SEND |
1449 (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) |
1450 (hdrwords + SIZE_OF_CRC);
1451 piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn);
1452 if (!piobuf)
1453 return;
1454 writeq(pbc, piobuf);
1455 hdr = (u32 *) &ibhdr;
1456 if (dd->flags & QIB_PIO_FLUSH_WC) {
1457 qib_flush_wc();
1458 qib_pio_copy(piobuf + 2, hdr, hdrwords - 1);
1459 qib_flush_wc();
1460 __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1);
1461 qib_flush_wc();
1462 } else
1463 qib_pio_copy(piobuf + 2, hdr, hdrwords);
1464 qib_sendbuf_done(dd, bufn);
1465 }
1466
1467 /*
1468 * This is called with interrupts disabled and sdma_lock held.
1469 */
1470 static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
1471 {
1472 struct qib_devdata *dd = ppd->dd;
1473 u64 set_sendctrl = 0;
1474 u64 clr_sendctrl = 0;
1475
1476 if (op & QIB_SDMA_SENDCTRL_OP_ENABLE)
1477 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable);
1478 else
1479 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable);
1480
1481 if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE)
1482 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable);
1483 else
1484 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable);
1485
1486 if (op & QIB_SDMA_SENDCTRL_OP_HALT)
1487 set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt);
1488 else
1489 clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt);
1490
1491 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN)
1492 set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) |
1493 SYM_MASK(SendCtrl_0, TxeAbortIbc) |
1494 SYM_MASK(SendCtrl_0, TxeDrainRmFifo);
1495 else
1496 clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) |
1497 SYM_MASK(SendCtrl_0, TxeAbortIbc) |
1498 SYM_MASK(SendCtrl_0, TxeDrainRmFifo);
1499
1500 spin_lock(&dd->sendctrl_lock);
1501
1502 /* If we are draining everything, block sends first */
1503 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) {
1504 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable);
1505 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
1506 qib_write_kreg(dd, kr_scratch, 0);
1507 }
1508
1509 ppd->p_sendctrl |= set_sendctrl;
1510 ppd->p_sendctrl &= ~clr_sendctrl;
1511
1512 if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP)
1513 qib_write_kreg_port(ppd, krp_sendctrl,
1514 ppd->p_sendctrl |
1515 SYM_MASK(SendCtrl_0, SDmaCleanup));
1516 else
1517 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
1518 qib_write_kreg(dd, kr_scratch, 0);
1519
1520 if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) {
1521 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable);
1522 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
1523 qib_write_kreg(dd, kr_scratch, 0);
1524 }
1525
1526 spin_unlock(&dd->sendctrl_lock);
1527
1528 if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1)
1529 flush_fifo(ppd);
1530 }
1531
1532 static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd)
1533 {
1534 __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned);
1535 }
1536
1537 static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd)
1538 {
1539 /*
1540 * Set SendDmaLenGen and clear and set
1541 * the MSB of the generation count to enable generation checking
1542 * and load the internal generation counter.
1543 */
1544 qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt);
1545 qib_write_kreg_port(ppd, krp_senddmalengen,
1546 ppd->sdma_descq_cnt |
1547 (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB));
1548 }
1549
1550 /*
1551 * Must be called with sdma_lock held, or before init finished.
1552 */
1553 static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail)
1554 {
1555 /* Commit writes to memory and advance the tail on the chip */
1556 wmb();
1557 ppd->sdma_descq_tail = tail;
1558 qib_write_kreg_port(ppd, krp_senddmatail, tail);
1559 }
1560
1561 /*
1562 * This is called with interrupts disabled and sdma_lock held.
1563 */
1564 static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd)
1565 {
1566 /*
1567 * Drain all FIFOs.
1568 * The hardware doesn't require this but we do it so that verbs
1569 * and user applications don't wait for link active to send stale
1570 * data.
1571 */
1572 sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH);
1573
1574 qib_sdma_7322_setlengen(ppd);
1575 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */
1576 ppd->sdma_head_dma[0] = 0;
1577 qib_7322_sdma_sendctrl(ppd,
1578 ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP);
1579 }
1580
1581 #define DISABLES_SDMA ( \
1582 QIB_E_P_SDMAHALT | \
1583 QIB_E_P_SDMADESCADDRMISALIGN | \
1584 QIB_E_P_SDMAMISSINGDW | \
1585 QIB_E_P_SDMADWEN | \
1586 QIB_E_P_SDMARPYTAG | \
1587 QIB_E_P_SDMA1STDESC | \
1588 QIB_E_P_SDMABASE | \
1589 QIB_E_P_SDMATAILOUTOFBOUND | \
1590 QIB_E_P_SDMAOUTOFBOUND | \
1591 QIB_E_P_SDMAGENMISMATCH)
1592
1593 static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs)
1594 {
1595 unsigned long flags;
1596 struct qib_devdata *dd = ppd->dd;
1597
1598 errs &= QIB_E_P_SDMAERRS;
1599
1600 if (errs & QIB_E_P_SDMAUNEXPDATA)
1601 qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit,
1602 ppd->port);
1603
1604 spin_lock_irqsave(&ppd->sdma_lock, flags);
1605
1606 if (errs != QIB_E_P_SDMAHALT) {
1607 /* SDMA errors have QIB_E_P_SDMAHALT and another bit set */
1608 qib_dev_porterr(dd, ppd->port,
1609 "SDMA %s 0x%016llx %s\n",
1610 qib_sdma_state_names[ppd->sdma_state.current_state],
1611 errs, ppd->cpspec->sdmamsgbuf);
1612 dump_sdma_7322_state(ppd);
1613 }
1614
1615 switch (ppd->sdma_state.current_state) {
1616 case qib_sdma_state_s00_hw_down:
1617 break;
1618
1619 case qib_sdma_state_s10_hw_start_up_wait:
1620 if (errs & QIB_E_P_SDMAHALT)
1621 __qib_sdma_process_event(ppd,
1622 qib_sdma_event_e20_hw_started);
1623 break;
1624
1625 case qib_sdma_state_s20_idle:
1626 break;
1627
1628 case qib_sdma_state_s30_sw_clean_up_wait:
1629 break;
1630
1631 case qib_sdma_state_s40_hw_clean_up_wait:
1632 if (errs & QIB_E_P_SDMAHALT)
1633 __qib_sdma_process_event(ppd,
1634 qib_sdma_event_e50_hw_cleaned);
1635 break;
1636
1637 case qib_sdma_state_s50_hw_halt_wait:
1638 if (errs & QIB_E_P_SDMAHALT)
1639 __qib_sdma_process_event(ppd,
1640 qib_sdma_event_e60_hw_halted);
1641 break;
1642
1643 case qib_sdma_state_s99_running:
1644 __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted);
1645 __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted);
1646 break;
1647 }
1648
1649 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
1650 }
1651
1652 /*
1653 * handle per-device errors (not per-port errors)
1654 */
1655 static noinline void handle_7322_errors(struct qib_devdata *dd)
1656 {
1657 char *msg;
1658 u64 iserr = 0;
1659 u64 errs;
1660 u64 mask;
1661 int log_idx;
1662
1663 qib_stats.sps_errints++;
1664 errs = qib_read_kreg64(dd, kr_errstatus);
1665 if (!errs) {
1666 qib_devinfo(dd->pcidev,
1667 "device error interrupt, but no error bits set!\n");
1668 goto done;
1669 }
1670
1671 /* don't report errors that are masked */
1672 errs &= dd->cspec->errormask;
1673 msg = dd->cspec->emsgbuf;
1674
1675 /* do these first, they are most important */
1676 if (errs & QIB_E_HARDWARE) {
1677 *msg = '\0';
1678 qib_7322_handle_hwerrors(dd, msg, sizeof dd->cspec->emsgbuf);
1679 } else
1680 for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx)
1681 if (errs & dd->eep_st_masks[log_idx].errs_to_log)
1682 qib_inc_eeprom_err(dd, log_idx, 1);
1683
1684 if (errs & QIB_E_SPKTERRS) {
1685 qib_disarm_7322_senderrbufs(dd->pport);
1686 qib_stats.sps_txerrs++;
1687 } else if (errs & QIB_E_INVALIDADDR)
1688 qib_stats.sps_txerrs++;
1689 else if (errs & QIB_E_ARMLAUNCH) {
1690 qib_stats.sps_txerrs++;
1691 qib_disarm_7322_senderrbufs(dd->pport);
1692 }
1693 qib_write_kreg(dd, kr_errclear, errs);
1694
1695 /*
1696 * The ones we mask off are handled specially below
1697 * or above. Also mask SDMADISABLED by default as it
1698 * is too chatty.
1699 */
1700 mask = QIB_E_HARDWARE;
1701 *msg = '\0';
1702
1703 err_decode(msg, sizeof dd->cspec->emsgbuf, errs & ~mask,
1704 qib_7322error_msgs);
1705
1706 /*
1707 * Getting reset is a tragedy for all ports. Mark the device
1708 * _and_ the ports as "offline" in way meaningful to each.
1709 */
1710 if (errs & QIB_E_RESET) {
1711 int pidx;
1712
1713 qib_dev_err(dd,
1714 "Got reset, requires re-init (unload and reload driver)\n");
1715 dd->flags &= ~QIB_INITTED; /* needs re-init */
1716 /* mark as having had error */
1717 *dd->devstatusp |= QIB_STATUS_HWERROR;
1718 for (pidx = 0; pidx < dd->num_pports; ++pidx)
1719 if (dd->pport[pidx].link_speed_supported)
1720 *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF;
1721 }
1722
1723 if (*msg && iserr)
1724 qib_dev_err(dd, "%s error\n", msg);
1725
1726 /*
1727 * If there were hdrq or egrfull errors, wake up any processes
1728 * waiting in poll. We used to try to check which contexts had
1729 * the overflow, but given the cost of that and the chip reads
1730 * to support it, it's better to just wake everybody up if we
1731 * get an overflow; waiters can poll again if it's not them.
1732 */
1733 if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
1734 qib_handle_urcv(dd, ~0U);
1735 if (errs & ERR_MASK(RcvEgrFullErr))
1736 qib_stats.sps_buffull++;
1737 else
1738 qib_stats.sps_hdrfull++;
1739 }
1740
1741 done:
1742 return;
1743 }
1744
1745 static void qib_error_tasklet(unsigned long data)
1746 {
1747 struct qib_devdata *dd = (struct qib_devdata *)data;
1748
1749 handle_7322_errors(dd);
1750 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
1751 }
1752
1753 static void reenable_chase(unsigned long opaque)
1754 {
1755 struct qib_pportdata *ppd = (struct qib_pportdata *)opaque;
1756
1757 ppd->cpspec->chase_timer.expires = 0;
1758 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
1759 QLOGIC_IB_IBCC_LINKINITCMD_POLL);
1760 }
1761
1762 static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow,
1763 u8 ibclt)
1764 {
1765 ppd->cpspec->chase_end = 0;
1766
1767 if (!qib_chase)
1768 return;
1769
1770 qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
1771 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
1772 ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME;
1773 add_timer(&ppd->cpspec->chase_timer);
1774 }
1775
1776 static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst)
1777 {
1778 u8 ibclt;
1779 unsigned long tnow;
1780
1781 ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState);
1782
1783 /*
1784 * Detect and handle the state chase issue, where we can
1785 * get stuck if we are unlucky on timing on both sides of
1786 * the link. If we are, we disable, set a timer, and
1787 * then re-enable.
1788 */
1789 switch (ibclt) {
1790 case IB_7322_LT_STATE_CFGRCVFCFG:
1791 case IB_7322_LT_STATE_CFGWAITRMT:
1792 case IB_7322_LT_STATE_TXREVLANES:
1793 case IB_7322_LT_STATE_CFGENH:
1794 tnow = jiffies;
1795 if (ppd->cpspec->chase_end &&
1796 time_after(tnow, ppd->cpspec->chase_end))
1797 disable_chase(ppd, tnow, ibclt);
1798 else if (!ppd->cpspec->chase_end)
1799 ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME;
1800 break;
1801 default:
1802 ppd->cpspec->chase_end = 0;
1803 break;
1804 }
1805
1806 if (((ibclt >= IB_7322_LT_STATE_CFGTEST &&
1807 ibclt <= IB_7322_LT_STATE_CFGWAITENH) ||
1808 ibclt == IB_7322_LT_STATE_LINKUP) &&
1809 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
1810 force_h1(ppd);
1811 ppd->cpspec->qdr_reforce = 1;
1812 if (!ppd->dd->cspec->r1)
1813 serdes_7322_los_enable(ppd, 0);
1814 } else if (ppd->cpspec->qdr_reforce &&
1815 (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) &&
1816 (ibclt == IB_7322_LT_STATE_CFGENH ||
1817 ibclt == IB_7322_LT_STATE_CFGIDLE ||
1818 ibclt == IB_7322_LT_STATE_LINKUP))
1819 force_h1(ppd);
1820
1821 if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) &&
1822 ppd->link_speed_enabled == QIB_IB_QDR &&
1823 (ibclt == IB_7322_LT_STATE_CFGTEST ||
1824 ibclt == IB_7322_LT_STATE_CFGENH ||
1825 (ibclt >= IB_7322_LT_STATE_POLLACTIVE &&
1826 ibclt <= IB_7322_LT_STATE_SLEEPQUIET)))
1827 adj_tx_serdes(ppd);
1828
1829 if (ibclt != IB_7322_LT_STATE_LINKUP) {
1830 u8 ltstate = qib_7322_phys_portstate(ibcst);
1831 u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0,
1832 LinkTrainingState);
1833 if (!ppd->dd->cspec->r1 &&
1834 pibclt == IB_7322_LT_STATE_LINKUP &&
1835 ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER &&
1836 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN &&
1837 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
1838 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
1839 /* If the link went down (but no into recovery,
1840 * turn LOS back on */
1841 serdes_7322_los_enable(ppd, 1);
1842 if (!ppd->cpspec->qdr_dfe_on &&
1843 ibclt <= IB_7322_LT_STATE_SLEEPQUIET) {
1844 ppd->cpspec->qdr_dfe_on = 1;
1845 ppd->cpspec->qdr_dfe_time = 0;
1846 /* On link down, reenable QDR adaptation */
1847 qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
1848 ppd->dd->cspec->r1 ?
1849 QDR_STATIC_ADAPT_DOWN_R1 :
1850 QDR_STATIC_ADAPT_DOWN);
1851 pr_info(
1852 "IB%u:%u re-enabled QDR adaptation ibclt %x\n",
1853 ppd->dd->unit, ppd->port, ibclt);
1854 }
1855 }
1856 }
1857
1858 static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32);
1859
1860 /*
1861 * This is per-pport error handling.
1862 * will likely get it's own MSIx interrupt (one for each port,
1863 * although just a single handler).
1864 */
1865 static noinline void handle_7322_p_errors(struct qib_pportdata *ppd)
1866 {
1867 char *msg;
1868 u64 ignore_this_time = 0, iserr = 0, errs, fmask;
1869 struct qib_devdata *dd = ppd->dd;
1870
1871 /* do this as soon as possible */
1872 fmask = qib_read_kreg64(dd, kr_act_fmask);
1873 if (!fmask)
1874 check_7322_rxe_status(ppd);
1875
1876 errs = qib_read_kreg_port(ppd, krp_errstatus);
1877 if (!errs)
1878 qib_devinfo(dd->pcidev,
1879 "Port%d error interrupt, but no error bits set!\n",
1880 ppd->port);
1881 if (!fmask)
1882 errs &= ~QIB_E_P_IBSTATUSCHANGED;
1883 if (!errs)
1884 goto done;
1885
1886 msg = ppd->cpspec->epmsgbuf;
1887 *msg = '\0';
1888
1889 if (errs & ~QIB_E_P_BITSEXTANT) {
1890 err_decode(msg, sizeof ppd->cpspec->epmsgbuf,
1891 errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs);
1892 if (!*msg)
1893 snprintf(msg, sizeof ppd->cpspec->epmsgbuf,
1894 "no others");
1895 qib_dev_porterr(dd, ppd->port,
1896 "error interrupt with unknown errors 0x%016Lx set (and %s)\n",
1897 (errs & ~QIB_E_P_BITSEXTANT), msg);
1898 *msg = '\0';
1899 }
1900
1901 if (errs & QIB_E_P_SHDR) {
1902 u64 symptom;
1903
1904 /* determine cause, then write to clear */
1905 symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom);
1906 qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0);
1907 err_decode(msg, sizeof ppd->cpspec->epmsgbuf, symptom,
1908 hdrchk_msgs);
1909 *msg = '\0';
1910 /* senderrbuf cleared in SPKTERRS below */
1911 }
1912
1913 if (errs & QIB_E_P_SPKTERRS) {
1914 if ((errs & QIB_E_P_LINK_PKTERRS) &&
1915 !(ppd->lflags & QIBL_LINKACTIVE)) {
1916 /*
1917 * This can happen when trying to bring the link
1918 * up, but the IB link changes state at the "wrong"
1919 * time. The IB logic then complains that the packet
1920 * isn't valid. We don't want to confuse people, so
1921 * we just don't print them, except at debug
1922 */
1923 err_decode(msg, sizeof ppd->cpspec->epmsgbuf,
1924 (errs & QIB_E_P_LINK_PKTERRS),
1925 qib_7322p_error_msgs);
1926 *msg = '\0';
1927 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS;
1928 }
1929 qib_disarm_7322_senderrbufs(ppd);
1930 } else if ((errs & QIB_E_P_LINK_PKTERRS) &&
1931 !(ppd->lflags & QIBL_LINKACTIVE)) {
1932 /*
1933 * This can happen when SMA is trying to bring the link
1934 * up, but the IB link changes state at the "wrong" time.
1935 * The IB logic then complains that the packet isn't
1936 * valid. We don't want to confuse people, so we just
1937 * don't print them, except at debug
1938 */
1939 err_decode(msg, sizeof ppd->cpspec->epmsgbuf, errs,
1940 qib_7322p_error_msgs);
1941 ignore_this_time = errs & QIB_E_P_LINK_PKTERRS;
1942 *msg = '\0';
1943 }
1944
1945 qib_write_kreg_port(ppd, krp_errclear, errs);
1946
1947 errs &= ~ignore_this_time;
1948 if (!errs)
1949 goto done;
1950
1951 if (errs & QIB_E_P_RPKTERRS)
1952 qib_stats.sps_rcverrs++;
1953 if (errs & QIB_E_P_SPKTERRS)
1954 qib_stats.sps_txerrs++;
1955
1956 iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS);
1957
1958 if (errs & QIB_E_P_SDMAERRS)
1959 sdma_7322_p_errors(ppd, errs);
1960
1961 if (errs & QIB_E_P_IBSTATUSCHANGED) {
1962 u64 ibcs;
1963 u8 ltstate;
1964
1965 ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a);
1966 ltstate = qib_7322_phys_portstate(ibcs);
1967
1968 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
1969 handle_serdes_issues(ppd, ibcs);
1970 if (!(ppd->cpspec->ibcctrl_a &
1971 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) {
1972 /*
1973 * We got our interrupt, so init code should be
1974 * happy and not try alternatives. Now squelch
1975 * other "chatter" from link-negotiation (pre Init)
1976 */
1977 ppd->cpspec->ibcctrl_a |=
1978 SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
1979 qib_write_kreg_port(ppd, krp_ibcctrl_a,
1980 ppd->cpspec->ibcctrl_a);
1981 }
1982
1983 /* Update our picture of width and speed from chip */
1984 ppd->link_width_active =
1985 (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ?
1986 IB_WIDTH_4X : IB_WIDTH_1X;
1987 ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0,
1988 LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs &
1989 SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ?
1990 QIB_IB_DDR : QIB_IB_SDR;
1991
1992 if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate !=
1993 IB_PHYSPORTSTATE_DISABLED)
1994 qib_set_ib_7322_lstate(ppd, 0,
1995 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
1996 else
1997 /*
1998 * Since going into a recovery state causes the link
1999 * state to go down and since recovery is transitory,
2000 * it is better if we "miss" ever seeing the link
2001 * training state go into recovery (i.e., ignore this
2002 * transition for link state special handling purposes)
2003 * without updating lastibcstat.
2004 */
2005 if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER &&
2006 ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN &&
2007 ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
2008 ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
2009 qib_handle_e_ibstatuschanged(ppd, ibcs);
2010 }
2011 if (*msg && iserr)
2012 qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
2013
2014 if (ppd->state_wanted & ppd->lflags)
2015 wake_up_interruptible(&ppd->state_wait);
2016 done:
2017 return;
2018 }
2019
2020 /* enable/disable chip from delivering interrupts */
2021 static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable)
2022 {
2023 if (enable) {
2024 if (dd->flags & QIB_BADINTR)
2025 return;
2026 qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask);
2027 /* cause any pending enabled interrupts to be re-delivered */
2028 qib_write_kreg(dd, kr_intclear, 0ULL);
2029 if (dd->cspec->num_msix_entries) {
2030 /* and same for MSIx */
2031 u64 val = qib_read_kreg64(dd, kr_intgranted);
2032 if (val)
2033 qib_write_kreg(dd, kr_intgranted, val);
2034 }
2035 } else
2036 qib_write_kreg(dd, kr_intmask, 0ULL);
2037 }
2038
2039 /*
2040 * Try to cleanup as much as possible for anything that might have gone
2041 * wrong while in freeze mode, such as pio buffers being written by user
2042 * processes (causing armlaunch), send errors due to going into freeze mode,
2043 * etc., and try to avoid causing extra interrupts while doing so.
2044 * Forcibly update the in-memory pioavail register copies after cleanup
2045 * because the chip won't do it while in freeze mode (the register values
2046 * themselves are kept correct).
2047 * Make sure that we don't lose any important interrupts by using the chip
2048 * feature that says that writing 0 to a bit in *clear that is set in
2049 * *status will cause an interrupt to be generated again (if allowed by
2050 * the *mask value).
2051 * This is in chip-specific code because of all of the register accesses,
2052 * even though the details are similar on most chips.
2053 */
2054 static void qib_7322_clear_freeze(struct qib_devdata *dd)
2055 {
2056 int pidx;
2057
2058 /* disable error interrupts, to avoid confusion */
2059 qib_write_kreg(dd, kr_errmask, 0ULL);
2060
2061 for (pidx = 0; pidx < dd->num_pports; ++pidx)
2062 if (dd->pport[pidx].link_speed_supported)
2063 qib_write_kreg_port(dd->pport + pidx, krp_errmask,
2064 0ULL);
2065
2066 /* also disable interrupts; errormask is sometimes overwriten */
2067 qib_7322_set_intr_state(dd, 0);
2068
2069 /* clear the freeze, and be sure chip saw it */
2070 qib_write_kreg(dd, kr_control, dd->control);
2071 qib_read_kreg32(dd, kr_scratch);
2072
2073 /*
2074 * Force new interrupt if any hwerr, error or interrupt bits are
2075 * still set, and clear "safe" send packet errors related to freeze
2076 * and cancelling sends. Re-enable error interrupts before possible
2077 * force of re-interrupt on pending interrupts.
2078 */
2079 qib_write_kreg(dd, kr_hwerrclear, 0ULL);
2080 qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
2081 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
2082 /* We need to purge per-port errs and reset mask, too */
2083 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
2084 if (!dd->pport[pidx].link_speed_supported)
2085 continue;
2086 qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull);
2087 qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull);
2088 }
2089 qib_7322_set_intr_state(dd, 1);
2090 }
2091
2092 /* no error handling to speak of */
2093 /**
2094 * qib_7322_handle_hwerrors - display hardware errors.
2095 * @dd: the qlogic_ib device
2096 * @msg: the output buffer
2097 * @msgl: the size of the output buffer
2098 *
2099 * Use same msg buffer as regular errors to avoid excessive stack
2100 * use. Most hardware errors are catastrophic, but for right now,
2101 * we'll print them and continue. We reuse the same message buffer as
2102 * qib_handle_errors() to avoid excessive stack usage.
2103 */
2104 static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg,
2105 size_t msgl)
2106 {
2107 u64 hwerrs;
2108 u32 ctrl;
2109 int isfatal = 0;
2110
2111 hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
2112 if (!hwerrs)
2113 goto bail;
2114 if (hwerrs == ~0ULL) {
2115 qib_dev_err(dd,
2116 "Read of hardware error status failed (all bits set); ignoring\n");
2117 goto bail;
2118 }
2119 qib_stats.sps_hwerrs++;
2120
2121 /* Always clear the error status register, except BIST fail */
2122 qib_write_kreg(dd, kr_hwerrclear, hwerrs &
2123 ~HWE_MASK(PowerOnBISTFailed));
2124
2125 hwerrs &= dd->cspec->hwerrmask;
2126
2127 /* no EEPROM logging, yet */
2128
2129 if (hwerrs)
2130 qib_devinfo(dd->pcidev,
2131 "Hardware error: hwerr=0x%llx (cleared)\n",
2132 (unsigned long long) hwerrs);
2133
2134 ctrl = qib_read_kreg32(dd, kr_control);
2135 if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) {
2136 /*
2137 * No recovery yet...
2138 */
2139 if ((hwerrs & ~HWE_MASK(LATriggered)) ||
2140 dd->cspec->stay_in_freeze) {
2141 /*
2142 * If any set that we aren't ignoring only make the
2143 * complaint once, in case it's stuck or recurring,
2144 * and we get here multiple times
2145 * Force link down, so switch knows, and
2146 * LEDs are turned off.
2147 */
2148 if (dd->flags & QIB_INITTED)
2149 isfatal = 1;
2150 } else
2151 qib_7322_clear_freeze(dd);
2152 }
2153
2154 if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
2155 isfatal = 1;
2156 strlcpy(msg,
2157 "[Memory BIST test failed, InfiniPath hardware unusable]",
2158 msgl);
2159 /* ignore from now on, so disable until driver reloaded */
2160 dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
2161 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
2162 }
2163
2164 err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs);
2165
2166 /* Ignore esoteric PLL failures et al. */
2167
2168 qib_dev_err(dd, "%s hardware error\n", msg);
2169
2170 if (hwerrs &
2171 (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) |
2172 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) {
2173 int pidx = 0;
2174 int err;
2175 unsigned long flags;
2176 struct qib_pportdata *ppd = dd->pport;
2177 for (; pidx < dd->num_pports; ++pidx, ppd++) {
2178 err = 0;
2179 if (pidx == 0 && (hwerrs &
2180 SYM_MASK(HwErrMask, SDmaMemReadErrMask_0)))
2181 err++;
2182 if (pidx == 1 && (hwerrs &
2183 SYM_MASK(HwErrMask, SDmaMemReadErrMask_1)))
2184 err++;
2185 if (err) {
2186 spin_lock_irqsave(&ppd->sdma_lock, flags);
2187 dump_sdma_7322_state(ppd);
2188 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
2189 }
2190 }
2191 }
2192
2193 if (isfatal && !dd->diag_client) {
2194 qib_dev_err(dd,
2195 "Fatal Hardware Error, no longer usable, SN %.16s\n",
2196 dd->serial);
2197 /*
2198 * for /sys status file and user programs to print; if no
2199 * trailing brace is copied, we'll know it was truncated.
2200 */
2201 if (dd->freezemsg)
2202 snprintf(dd->freezemsg, dd->freezelen,
2203 "{%s}", msg);
2204 qib_disable_after_error(dd);
2205 }
2206 bail:;
2207 }
2208
2209 /**
2210 * qib_7322_init_hwerrors - enable hardware errors
2211 * @dd: the qlogic_ib device
2212 *
2213 * now that we have finished initializing everything that might reasonably
2214 * cause a hardware error, and cleared those errors bits as they occur,
2215 * we can enable hardware errors in the mask (potentially enabling
2216 * freeze mode), and enable hardware errors as errors (along with
2217 * everything else) in errormask
2218 */
2219 static void qib_7322_init_hwerrors(struct qib_devdata *dd)
2220 {
2221 int pidx;
2222 u64 extsval;
2223
2224 extsval = qib_read_kreg64(dd, kr_extstatus);
2225 if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED |
2226 QIB_EXTS_MEMBIST_ENDTEST)))
2227 qib_dev_err(dd, "MemBIST did not complete!\n");
2228
2229 /* never clear BIST failure, so reported on each driver load */
2230 qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
2231 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
2232
2233 /* clear all */
2234 qib_write_kreg(dd, kr_errclear, ~0ULL);
2235 /* enable errors that are masked, at least this first time. */
2236 qib_write_kreg(dd, kr_errmask, ~0ULL);
2237 dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
2238 for (pidx = 0; pidx < dd->num_pports; ++pidx)
2239 if (dd->pport[pidx].link_speed_supported)
2240 qib_write_kreg_port(dd->pport + pidx, krp_errmask,
2241 ~0ULL);
2242 }
2243
2244 /*
2245 * Disable and enable the armlaunch error. Used for PIO bandwidth testing
2246 * on chips that are count-based, rather than trigger-based. There is no
2247 * reference counting, but that's also fine, given the intended use.
2248 * Only chip-specific because it's all register accesses
2249 */
2250 static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable)
2251 {
2252 if (enable) {
2253 qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH);
2254 dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH;
2255 } else
2256 dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH;
2257 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
2258 }
2259
2260 /*
2261 * Formerly took parameter <which> in pre-shifted,
2262 * pre-merged form with LinkCmd and LinkInitCmd
2263 * together, and assuming the zero was NOP.
2264 */
2265 static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd,
2266 u16 linitcmd)
2267 {
2268 u64 mod_wd;
2269 struct qib_devdata *dd = ppd->dd;
2270 unsigned long flags;
2271
2272 if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
2273 /*
2274 * If we are told to disable, note that so link-recovery
2275 * code does not attempt to bring us back up.
2276 * Also reset everything that we can, so we start
2277 * completely clean when re-enabled (before we
2278 * actually issue the disable to the IBC)
2279 */
2280 qib_7322_mini_pcs_reset(ppd);
2281 spin_lock_irqsave(&ppd->lflags_lock, flags);
2282 ppd->lflags |= QIBL_IB_LINK_DISABLED;
2283 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2284 } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
2285 /*
2286 * Any other linkinitcmd will lead to LINKDOWN and then
2287 * to INIT (if all is well), so clear flag to let
2288 * link-recovery code attempt to bring us back up.
2289 */
2290 spin_lock_irqsave(&ppd->lflags_lock, flags);
2291 ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
2292 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2293 /*
2294 * Clear status change interrupt reduction so the
2295 * new state is seen.
2296 */
2297 ppd->cpspec->ibcctrl_a &=
2298 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
2299 }
2300
2301 mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) |
2302 (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
2303
2304 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a |
2305 mod_wd);
2306 /* write to chip to prevent back-to-back writes of ibc reg */
2307 qib_write_kreg(dd, kr_scratch, 0);
2308
2309 }
2310
2311 /*
2312 * The total RCV buffer memory is 64KB, used for both ports, and is
2313 * in units of 64 bytes (same as IB flow control credit unit).
2314 * The consumedVL unit in the same registers are in 32 byte units!
2315 * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks,
2316 * and we can therefore allocate just 9 IB credits for 2 VL15 packets
2317 * in krp_rxcreditvl15, rather than 10.
2318 */
2319 #define RCV_BUF_UNITSZ 64
2320 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports))
2321
2322 static void set_vls(struct qib_pportdata *ppd)
2323 {
2324 int i, numvls, totcred, cred_vl, vl0extra;
2325 struct qib_devdata *dd = ppd->dd;
2326 u64 val;
2327
2328 numvls = qib_num_vls(ppd->vls_operational);
2329
2330 /*
2331 * Set up per-VL credits. Below is kluge based on these assumptions:
2332 * 1) port is disabled at the time early_init is called.
2333 * 2) give VL15 17 credits, for two max-plausible packets.
2334 * 3) Give VL0-N the rest, with any rounding excess used for VL0
2335 */
2336 /* 2 VL15 packets @ 288 bytes each (including IB headers) */
2337 totcred = NUM_RCV_BUF_UNITS(dd);
2338 cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ;
2339 totcred -= cred_vl;
2340 qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl);
2341 cred_vl = totcred / numvls;
2342 vl0extra = totcred - cred_vl * numvls;
2343 qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra);
2344 for (i = 1; i < numvls; i++)
2345 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl);
2346 for (; i < 8; i++) /* no buffer space for other VLs */
2347 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0);
2348
2349 /* Notify IBC that credits need to be recalculated */
2350 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx);
2351 val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE);
2352 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
2353 qib_write_kreg(dd, kr_scratch, 0ULL);
2354 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE);
2355 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
2356
2357 for (i = 0; i < numvls; i++)
2358 val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i);
2359 val = qib_read_kreg_port(ppd, krp_rxcreditvl15);
2360
2361 /* Change the number of operational VLs */
2362 ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a &
2363 ~SYM_MASK(IBCCtrlA_0, NumVLane)) |
2364 ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane));
2365 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
2366 qib_write_kreg(dd, kr_scratch, 0ULL);
2367 }
2368
2369 /*
2370 * The code that deals with actual SerDes is in serdes_7322_init().
2371 * Compared to the code for iba7220, it is minimal.
2372 */
2373 static int serdes_7322_init(struct qib_pportdata *ppd);
2374
2375 /**
2376 * qib_7322_bringup_serdes - bring up the serdes
2377 * @ppd: physical port on the qlogic_ib device
2378 */
2379 static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
2380 {
2381 struct qib_devdata *dd = ppd->dd;
2382 u64 val, guid, ibc;
2383 unsigned long flags;
2384 int ret = 0;
2385
2386 /*
2387 * SerDes model not in Pd, but still need to
2388 * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere
2389 * eventually.
2390 */
2391 /* Put IBC in reset, sends disabled (should be in reset already) */
2392 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn);
2393 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
2394 qib_write_kreg(dd, kr_scratch, 0ULL);
2395
2396 if (qib_compat_ddr_negotiate) {
2397 ppd->cpspec->ibdeltainprog = 1;
2398 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
2399 crp_ibsymbolerr);
2400 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd,
2401 crp_iblinkerrrecov);
2402 }
2403
2404 /* flowcontrolwatermark is in units of KBytes */
2405 ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark);
2406 /*
2407 * Flow control is sent this often, even if no changes in
2408 * buffer space occur. Units are 128ns for this chip.
2409 * Set to 3usec.
2410 */
2411 ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod);
2412 /* max error tolerance */
2413 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold);
2414 /* IB credit flow control. */
2415 ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold);
2416 /*
2417 * set initial max size pkt IBC will send, including ICRC; it's the
2418 * PIO buffer size in dwords, less 1; also see qib_set_mtu()
2419 */
2420 ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) <<
2421 SYM_LSB(IBCCtrlA_0, MaxPktLen);
2422 ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */
2423
2424 /*
2425 * Reset the PCS interface to the serdes (and also ibc, which is still
2426 * in reset from above). Writes new value of ibcctrl_a as last step.
2427 */
2428 qib_7322_mini_pcs_reset(ppd);
2429
2430 if (!ppd->cpspec->ibcctrl_b) {
2431 unsigned lse = ppd->link_speed_enabled;
2432
2433 /*
2434 * Not on re-init after reset, establish shadow
2435 * and force initial config.
2436 */
2437 ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd,
2438 krp_ibcctrl_b);
2439 ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR |
2440 IBA7322_IBC_SPEED_DDR |
2441 IBA7322_IBC_SPEED_SDR |
2442 IBA7322_IBC_WIDTH_AUTONEG |
2443 SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED));
2444 if (lse & (lse - 1)) /* Muliple speeds enabled */
2445 ppd->cpspec->ibcctrl_b |=
2446 (lse << IBA7322_IBC_SPEED_LSB) |
2447 IBA7322_IBC_IBTA_1_2_MASK |
2448 IBA7322_IBC_MAX_SPEED_MASK;
2449 else
2450 ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ?
2451 IBA7322_IBC_SPEED_QDR |
2452 IBA7322_IBC_IBTA_1_2_MASK :
2453 (lse == QIB_IB_DDR) ?
2454 IBA7322_IBC_SPEED_DDR :
2455 IBA7322_IBC_SPEED_SDR;
2456 if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) ==
2457 (IB_WIDTH_1X | IB_WIDTH_4X))
2458 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG;
2459 else
2460 ppd->cpspec->ibcctrl_b |=
2461 ppd->link_width_enabled == IB_WIDTH_4X ?
2462 IBA7322_IBC_WIDTH_4X_ONLY :
2463 IBA7322_IBC_WIDTH_1X_ONLY;
2464
2465 /* always enable these on driver reload, not sticky */
2466 ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK |
2467 IBA7322_IBC_HRTBT_MASK);
2468 }
2469 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
2470
2471 /* setup so we have more time at CFGTEST to change H1 */
2472 val = qib_read_kreg_port(ppd, krp_ibcctrl_c);
2473 val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH);
2474 val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH);
2475 qib_write_kreg_port(ppd, krp_ibcctrl_c, val);
2476
2477 serdes_7322_init(ppd);
2478
2479 guid = be64_to_cpu(ppd->guid);
2480 if (!guid) {
2481 if (dd->base_guid)
2482 guid = be64_to_cpu(dd->base_guid) + ppd->port - 1;
2483 ppd->guid = cpu_to_be64(guid);
2484 }
2485
2486 qib_write_kreg_port(ppd, krp_hrtbt_guid, guid);
2487 /* write to chip to prevent back-to-back writes of ibc reg */
2488 qib_write_kreg(dd, kr_scratch, 0);
2489
2490 /* Enable port */
2491 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn);
2492 set_vls(ppd);
2493
2494 /* initially come up DISABLED, without sending anything. */
2495 val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
2496 QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
2497 qib_write_kreg_port(ppd, krp_ibcctrl_a, val);
2498 qib_write_kreg(dd, kr_scratch, 0ULL);
2499 /* clear the linkinit cmds */
2500 ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
2501
2502 /* be paranoid against later code motion, etc. */
2503 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
2504 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable);
2505 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
2506 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
2507
2508 /* Also enable IBSTATUSCHG interrupt. */
2509 val = qib_read_kreg_port(ppd, krp_errmask);
2510 qib_write_kreg_port(ppd, krp_errmask,
2511 val | ERR_MASK_N(IBStatusChanged));
2512
2513 /* Always zero until we start messing with SerDes for real */
2514 return ret;
2515 }
2516
2517 /**
2518 * qib_7322_quiet_serdes - set serdes to txidle
2519 * @dd: the qlogic_ib device
2520 * Called when driver is being unloaded
2521 */
2522 static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd)
2523 {
2524 u64 val;
2525 unsigned long flags;
2526
2527 qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
2528
2529 spin_lock_irqsave(&ppd->lflags_lock, flags);
2530 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
2531 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2532 wake_up(&ppd->cpspec->autoneg_wait);
2533 cancel_delayed_work_sync(&ppd->cpspec->autoneg_work);
2534 if (ppd->dd->cspec->r1)
2535 cancel_delayed_work_sync(&ppd->cpspec->ipg_work);
2536
2537 ppd->cpspec->chase_end = 0;
2538 if (ppd->cpspec->chase_timer.data) /* if initted */
2539 del_timer_sync(&ppd->cpspec->chase_timer);
2540
2541 /*
2542 * Despite the name, actually disables IBC as well. Do it when
2543 * we are as sure as possible that no more packets can be
2544 * received, following the down and the PCS reset.
2545 * The actual disabling happens in qib_7322_mini_pci_reset(),
2546 * along with the PCS being reset.
2547 */
2548 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn);
2549 qib_7322_mini_pcs_reset(ppd);
2550
2551 /*
2552 * Update the adjusted counters so the adjustment persists
2553 * across driver reload.
2554 */
2555 if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta ||
2556 ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) {
2557 struct qib_devdata *dd = ppd->dd;
2558 u64 diagc;
2559
2560 /* enable counter writes */
2561 diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
2562 qib_write_kreg(dd, kr_hwdiagctrl,
2563 diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
2564
2565 if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) {
2566 val = read_7322_creg32_port(ppd, crp_ibsymbolerr);
2567 if (ppd->cpspec->ibdeltainprog)
2568 val -= val - ppd->cpspec->ibsymsnap;
2569 val -= ppd->cpspec->ibsymdelta;
2570 write_7322_creg_port(ppd, crp_ibsymbolerr, val);
2571 }
2572 if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) {
2573 val = read_7322_creg32_port(ppd, crp_iblinkerrrecov);
2574 if (ppd->cpspec->ibdeltainprog)
2575 val -= val - ppd->cpspec->iblnkerrsnap;
2576 val -= ppd->cpspec->iblnkerrdelta;
2577 write_7322_creg_port(ppd, crp_iblinkerrrecov, val);
2578 }
2579 if (ppd->cpspec->iblnkdowndelta) {
2580 val = read_7322_creg32_port(ppd, crp_iblinkdown);
2581 val += ppd->cpspec->iblnkdowndelta;
2582 write_7322_creg_port(ppd, crp_iblinkdown, val);
2583 }
2584 /*
2585 * No need to save ibmalfdelta since IB perfcounters
2586 * are cleared on driver reload.
2587 */
2588
2589 /* and disable counter writes */
2590 qib_write_kreg(dd, kr_hwdiagctrl, diagc);
2591 }
2592 }
2593
2594 /**
2595 * qib_setup_7322_setextled - set the state of the two external LEDs
2596 * @ppd: physical port on the qlogic_ib device
2597 * @on: whether the link is up or not
2598 *
2599 * The exact combo of LEDs if on is true is determined by looking
2600 * at the ibcstatus.
2601 *
2602 * These LEDs indicate the physical and logical state of IB link.
2603 * For this chip (at least with recommended board pinouts), LED1
2604 * is Yellow (logical state) and LED2 is Green (physical state),
2605 *
2606 * Note: We try to match the Mellanox HCA LED behavior as best
2607 * we can. Green indicates physical link state is OK (something is
2608 * plugged in, and we can train).
2609 * Amber indicates the link is logically up (ACTIVE).
2610 * Mellanox further blinks the amber LED to indicate data packet
2611 * activity, but we have no hardware support for that, so it would
2612 * require waking up every 10-20 msecs and checking the counters
2613 * on the chip, and then turning the LED off if appropriate. That's
2614 * visible overhead, so not something we will do.
2615 */
2616 static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on)
2617 {
2618 struct qib_devdata *dd = ppd->dd;
2619 u64 extctl, ledblink = 0, val;
2620 unsigned long flags;
2621 int yel, grn;
2622
2623 /*
2624 * The diags use the LED to indicate diag info, so we leave
2625 * the external LED alone when the diags are running.
2626 */
2627 if (dd->diag_client)
2628 return;
2629
2630 /* Allow override of LED display for, e.g. Locating system in rack */
2631 if (ppd->led_override) {
2632 grn = (ppd->led_override & QIB_LED_PHYS);
2633 yel = (ppd->led_override & QIB_LED_LOG);
2634 } else if (on) {
2635 val = qib_read_kreg_port(ppd, krp_ibcstatus_a);
2636 grn = qib_7322_phys_portstate(val) ==
2637 IB_PHYSPORTSTATE_LINKUP;
2638 yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE;
2639 } else {
2640 grn = 0;
2641 yel = 0;
2642 }
2643
2644 spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
2645 extctl = dd->cspec->extctrl & (ppd->port == 1 ?
2646 ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK);
2647 if (grn) {
2648 extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN;
2649 /*
2650 * Counts are in chip clock (4ns) periods.
2651 * This is 1/16 sec (66.6ms) on,
2652 * 3/16 sec (187.5 ms) off, with packets rcvd.
2653 */
2654 ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) |
2655 ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT);
2656 }
2657 if (yel)
2658 extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL;
2659 dd->cspec->extctrl = extctl;
2660 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
2661 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
2662
2663 if (ledblink) /* blink the LED on packet receive */
2664 qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink);
2665 }
2666
2667 #ifdef CONFIG_INFINIBAND_QIB_DCA
2668
2669 static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event)
2670 {
2671 switch (event) {
2672 case DCA_PROVIDER_ADD:
2673 if (dd->flags & QIB_DCA_ENABLED)
2674 break;
2675 if (!dca_add_requester(&dd->pcidev->dev)) {
2676 qib_devinfo(dd->pcidev, "DCA enabled\n");
2677 dd->flags |= QIB_DCA_ENABLED;
2678 qib_setup_dca(dd);
2679 }
2680 break;
2681 case DCA_PROVIDER_REMOVE:
2682 if (dd->flags & QIB_DCA_ENABLED) {
2683 dca_remove_requester(&dd->pcidev->dev);
2684 dd->flags &= ~QIB_DCA_ENABLED;
2685 dd->cspec->dca_ctrl = 0;
2686 qib_write_kreg(dd, KREG_IDX(DCACtrlA),
2687 dd->cspec->dca_ctrl);
2688 }
2689 break;
2690 }
2691 return 0;
2692 }
2693
2694 static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu)
2695 {
2696 struct qib_devdata *dd = rcd->dd;
2697 struct qib_chip_specific *cspec = dd->cspec;
2698
2699 if (!(dd->flags & QIB_DCA_ENABLED))
2700 return;
2701 if (cspec->rhdr_cpu[rcd->ctxt] != cpu) {
2702 const struct dca_reg_map *rmp;
2703
2704 cspec->rhdr_cpu[rcd->ctxt] = cpu;
2705 rmp = &dca_rcvhdr_reg_map[rcd->ctxt];
2706 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask;
2707 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |=
2708 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb;
2709 qib_devinfo(dd->pcidev,
2710 "Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu,
2711 (long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]);
2712 qib_write_kreg(dd, rmp->regno,
2713 cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]);
2714 cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable);
2715 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl);
2716 }
2717 }
2718
2719 static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu)
2720 {
2721 struct qib_devdata *dd = ppd->dd;
2722 struct qib_chip_specific *cspec = dd->cspec;
2723 unsigned pidx = ppd->port - 1;
2724
2725 if (!(dd->flags & QIB_DCA_ENABLED))
2726 return;
2727 if (cspec->sdma_cpu[pidx] != cpu) {
2728 cspec->sdma_cpu[pidx] = cpu;
2729 cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ?
2730 SYM_MASK(DCACtrlF, SendDma1DCAOPH) :
2731 SYM_MASK(DCACtrlF, SendDma0DCAOPH));
2732 cspec->dca_rcvhdr_ctrl[4] |=
2733 (u64) dca3_get_tag(&dd->pcidev->dev, cpu) <<
2734 (ppd->hw_pidx ?
2735 SYM_LSB(DCACtrlF, SendDma1DCAOPH) :
2736 SYM_LSB(DCACtrlF, SendDma0DCAOPH));
2737 qib_devinfo(dd->pcidev,
2738 "sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu,
2739 (long long) cspec->dca_rcvhdr_ctrl[4]);
2740 qib_write_kreg(dd, KREG_IDX(DCACtrlF),
2741 cspec->dca_rcvhdr_ctrl[4]);
2742 cspec->dca_ctrl |= ppd->hw_pidx ?
2743 SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) :
2744 SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable);
2745 qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl);
2746 }
2747 }
2748
2749 static void qib_setup_dca(struct qib_devdata *dd)
2750 {
2751 struct qib_chip_specific *cspec = dd->cspec;
2752 int i;
2753
2754 for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++)
2755 cspec->rhdr_cpu[i] = -1;
2756 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++)
2757 cspec->sdma_cpu[i] = -1;
2758 cspec->dca_rcvhdr_ctrl[0] =
2759 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) |
2760 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) |
2761 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) |
2762 (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt));
2763 cspec->dca_rcvhdr_ctrl[1] =
2764 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) |
2765 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) |
2766 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) |
2767 (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt));
2768 cspec->dca_rcvhdr_ctrl[2] =
2769 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) |
2770 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) |
2771 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) |
2772 (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt));
2773 cspec->dca_rcvhdr_ctrl[3] =
2774 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) |
2775 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) |
2776 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) |
2777 (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt));
2778 cspec->dca_rcvhdr_ctrl[4] =
2779 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) |
2780 (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt));
2781 for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++)
2782 qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i,
2783 cspec->dca_rcvhdr_ctrl[i]);
2784 for (i = 0; i < cspec->num_msix_entries; i++)
2785 setup_dca_notifier(dd, &cspec->msix_entries[i]);
2786 }
2787
2788 static void qib_irq_notifier_notify(struct irq_affinity_notify *notify,
2789 const cpumask_t *mask)
2790 {
2791 struct qib_irq_notify *n =
2792 container_of(notify, struct qib_irq_notify, notify);
2793 int cpu = cpumask_first(mask);
2794
2795 if (n->rcv) {
2796 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg;
2797 qib_update_rhdrq_dca(rcd, cpu);
2798 } else {
2799 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg;
2800 qib_update_sdma_dca(ppd, cpu);
2801 }
2802 }
2803
2804 static void qib_irq_notifier_release(struct kref *ref)
2805 {
2806 struct qib_irq_notify *n =
2807 container_of(ref, struct qib_irq_notify, notify.kref);
2808 struct qib_devdata *dd;
2809
2810 if (n->rcv) {
2811 struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg;
2812 dd = rcd->dd;
2813 } else {
2814 struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg;
2815 dd = ppd->dd;
2816 }
2817 qib_devinfo(dd->pcidev,
2818 "release on HCA notify 0x%p n 0x%p\n", ref, n);
2819 kfree(n);
2820 }
2821 #endif
2822
2823 /*
2824 * Disable MSIx interrupt if enabled, call generic MSIx code
2825 * to cleanup, and clear pending MSIx interrupts.
2826 * Used for fallback to INTx, after reset, and when MSIx setup fails.
2827 */
2828 static void qib_7322_nomsix(struct qib_devdata *dd)
2829 {
2830 u64 intgranted;
2831 int n;
2832
2833 dd->cspec->main_int_mask = ~0ULL;
2834 n = dd->cspec->num_msix_entries;
2835 if (n) {
2836 int i;
2837
2838 dd->cspec->num_msix_entries = 0;
2839 for (i = 0; i < n; i++) {
2840 #ifdef CONFIG_INFINIBAND_QIB_DCA
2841 reset_dca_notifier(dd, &dd->cspec->msix_entries[i]);
2842 #endif
2843 irq_set_affinity_hint(
2844 dd->cspec->msix_entries[i].msix.vector, NULL);
2845 free_cpumask_var(dd->cspec->msix_entries[i].mask);
2846 free_irq(dd->cspec->msix_entries[i].msix.vector,
2847 dd->cspec->msix_entries[i].arg);
2848 }
2849 qib_nomsix(dd);
2850 }
2851 /* make sure no MSIx interrupts are left pending */
2852 intgranted = qib_read_kreg64(dd, kr_intgranted);
2853 if (intgranted)
2854 qib_write_kreg(dd, kr_intgranted, intgranted);
2855 }
2856
2857 static void qib_7322_free_irq(struct qib_devdata *dd)
2858 {
2859 if (dd->cspec->irq) {
2860 free_irq(dd->cspec->irq, dd);
2861 dd->cspec->irq = 0;
2862 }
2863 qib_7322_nomsix(dd);
2864 }
2865
2866 static void qib_setup_7322_cleanup(struct qib_devdata *dd)
2867 {
2868 int i;
2869
2870 #ifdef CONFIG_INFINIBAND_QIB_DCA
2871 if (dd->flags & QIB_DCA_ENABLED) {
2872 dca_remove_requester(&dd->pcidev->dev);
2873 dd->flags &= ~QIB_DCA_ENABLED;
2874 dd->cspec->dca_ctrl = 0;
2875 qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl);
2876 }
2877 #endif
2878
2879 qib_7322_free_irq(dd);
2880 kfree(dd->cspec->cntrs);
2881 kfree(dd->cspec->sendchkenable);
2882 kfree(dd->cspec->sendgrhchk);
2883 kfree(dd->cspec->sendibchk);
2884 kfree(dd->cspec->msix_entries);
2885 for (i = 0; i < dd->num_pports; i++) {
2886 unsigned long flags;
2887 u32 mask = QSFP_GPIO_MOD_PRS_N |
2888 (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT);
2889
2890 kfree(dd->pport[i].cpspec->portcntrs);
2891 if (dd->flags & QIB_HAS_QSFP) {
2892 spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
2893 dd->cspec->gpio_mask &= ~mask;
2894 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
2895 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
2896 qib_qsfp_deinit(&dd->pport[i].cpspec->qsfp_data);
2897 }
2898 if (dd->pport[i].ibport_data.smi_ah)
2899 ib_destroy_ah(&dd->pport[i].ibport_data.smi_ah->ibah);
2900 }
2901 }
2902
2903 /* handle SDMA interrupts */
2904 static void sdma_7322_intr(struct qib_devdata *dd, u64 istat)
2905 {
2906 struct qib_pportdata *ppd0 = &dd->pport[0];
2907 struct qib_pportdata *ppd1 = &dd->pport[1];
2908 u64 intr0 = istat & (INT_MASK_P(SDma, 0) |
2909 INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0));
2910 u64 intr1 = istat & (INT_MASK_P(SDma, 1) |
2911 INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1));
2912
2913 if (intr0)
2914 qib_sdma_intr(ppd0);
2915 if (intr1)
2916 qib_sdma_intr(ppd1);
2917
2918 if (istat & INT_MASK_PM(SDmaCleanupDone, 0))
2919 qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started);
2920 if (istat & INT_MASK_PM(SDmaCleanupDone, 1))
2921 qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started);
2922 }
2923
2924 /*
2925 * Set or clear the Send buffer available interrupt enable bit.
2926 */
2927 static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint)
2928 {
2929 unsigned long flags;
2930
2931 spin_lock_irqsave(&dd->sendctrl_lock, flags);
2932 if (needint)
2933 dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail);
2934 else
2935 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail);
2936 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
2937 qib_write_kreg(dd, kr_scratch, 0ULL);
2938 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
2939 }
2940
2941 /*
2942 * Somehow got an interrupt with reserved bits set in interrupt status.
2943 * Print a message so we know it happened, then clear them.
2944 * keep mainline interrupt handler cache-friendly
2945 */
2946 static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat)
2947 {
2948 u64 kills;
2949 char msg[128];
2950
2951 kills = istat & ~QIB_I_BITSEXTANT;
2952 qib_dev_err(dd,
2953 "Clearing reserved interrupt(s) 0x%016llx: %s\n",
2954 (unsigned long long) kills, msg);
2955 qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills));
2956 }
2957
2958 /* keep mainline interrupt handler cache-friendly */
2959 static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd)
2960 {
2961 u32 gpiostatus;
2962 int handled = 0;
2963 int pidx;
2964
2965 /*
2966 * Boards for this chip currently don't use GPIO interrupts,
2967 * so clear by writing GPIOstatus to GPIOclear, and complain
2968 * to developer. To avoid endless repeats, clear
2969 * the bits in the mask, since there is some kind of
2970 * programming error or chip problem.
2971 */
2972 gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
2973 /*
2974 * In theory, writing GPIOstatus to GPIOclear could
2975 * have a bad side-effect on some diagnostic that wanted
2976 * to poll for a status-change, but the various shadows
2977 * make that problematic at best. Diags will just suppress
2978 * all GPIO interrupts during such tests.
2979 */
2980 qib_write_kreg(dd, kr_gpio_clear, gpiostatus);
2981 /*
2982 * Check for QSFP MOD_PRS changes
2983 * only works for single port if IB1 != pidx1
2984 */
2985 for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP);
2986 ++pidx) {
2987 struct qib_pportdata *ppd;
2988 struct qib_qsfp_data *qd;
2989 u32 mask;
2990 if (!dd->pport[pidx].link_speed_supported)
2991 continue;
2992 mask = QSFP_GPIO_MOD_PRS_N;
2993 ppd = dd->pport + pidx;
2994 mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx);
2995 if (gpiostatus & dd->cspec->gpio_mask & mask) {
2996 u64 pins;
2997 qd = &ppd->cpspec->qsfp_data;
2998 gpiostatus &= ~mask;
2999 pins = qib_read_kreg64(dd, kr_extstatus);
3000 pins >>= SYM_LSB(EXTStatus, GPIOIn);
3001 if (!(pins & mask)) {
3002 ++handled;
3003 qd->t_insert = jiffies;
3004 queue_work(ib_wq, &qd->work);
3005 }
3006 }
3007 }
3008
3009 if (gpiostatus && !handled) {
3010 const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
3011 u32 gpio_irq = mask & gpiostatus;
3012
3013 /*
3014 * Clear any troublemakers, and update chip from shadow
3015 */
3016 dd->cspec->gpio_mask &= ~gpio_irq;
3017 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
3018 }
3019 }
3020
3021 /*
3022 * Handle errors and unusual events first, separate function
3023 * to improve cache hits for fast path interrupt handling.
3024 */
3025 static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat)
3026 {
3027 if (istat & ~QIB_I_BITSEXTANT)
3028 unknown_7322_ibits(dd, istat);
3029 if (istat & QIB_I_GPIO)
3030 unknown_7322_gpio_intr(dd);
3031 if (istat & QIB_I_C_ERROR) {
3032 qib_write_kreg(dd, kr_errmask, 0ULL);
3033 tasklet_schedule(&dd->error_tasklet);
3034 }
3035 if (istat & INT_MASK_P(Err, 0) && dd->rcd[0])
3036 handle_7322_p_errors(dd->rcd[0]->ppd);
3037 if (istat & INT_MASK_P(Err, 1) && dd->rcd[1])
3038 handle_7322_p_errors(dd->rcd[1]->ppd);
3039 }
3040
3041 /*
3042 * Dynamically adjust the rcv int timeout for a context based on incoming
3043 * packet rate.
3044 */
3045 static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts)
3046 {
3047 struct qib_devdata *dd = rcd->dd;
3048 u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt];
3049
3050 /*
3051 * Dynamically adjust idle timeout on chip
3052 * based on number of packets processed.
3053 */
3054 if (npkts < rcv_int_count && timeout > 2)
3055 timeout >>= 1;
3056 else if (npkts >= rcv_int_count && timeout < rcv_int_timeout)
3057 timeout = min(timeout << 1, rcv_int_timeout);
3058 else
3059 return;
3060
3061 dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout;
3062 qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout);
3063 }
3064
3065 /*
3066 * This is the main interrupt handler.
3067 * It will normally only be used for low frequency interrupts but may
3068 * have to handle all interrupts if INTx is enabled or fewer than normal
3069 * MSIx interrupts were allocated.
3070 * This routine should ignore the interrupt bits for any of the
3071 * dedicated MSIx handlers.
3072 */
3073 static irqreturn_t qib_7322intr(int irq, void *data)
3074 {
3075 struct qib_devdata *dd = data;
3076 irqreturn_t ret;
3077 u64 istat;
3078 u64 ctxtrbits;
3079 u64 rmask;
3080 unsigned i;
3081 u32 npkts;
3082
3083 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
3084 /*
3085 * This return value is not great, but we do not want the
3086 * interrupt core code to remove our interrupt handler
3087 * because we don't appear to be handling an interrupt
3088 * during a chip reset.
3089 */
3090 ret = IRQ_HANDLED;
3091 goto bail;
3092 }
3093
3094 istat = qib_read_kreg64(dd, kr_intstatus);
3095
3096 if (unlikely(istat == ~0ULL)) {
3097 qib_bad_intrstatus(dd);
3098 qib_dev_err(dd, "Interrupt status all f's, skipping\n");
3099 /* don't know if it was our interrupt or not */
3100 ret = IRQ_NONE;
3101 goto bail;
3102 }
3103
3104 istat &= dd->cspec->main_int_mask;
3105 if (unlikely(!istat)) {
3106 /* already handled, or shared and not us */
3107 ret = IRQ_NONE;
3108 goto bail;
3109 }
3110
3111 qib_stats.sps_ints++;
3112 if (dd->int_counter != (u32) -1)
3113 dd->int_counter++;
3114
3115 /* handle "errors" of various kinds first, device ahead of port */
3116 if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO |
3117 QIB_I_C_ERROR | INT_MASK_P(Err, 0) |
3118 INT_MASK_P(Err, 1))))
3119 unlikely_7322_intr(dd, istat);
3120
3121 /*
3122 * Clear the interrupt bits we found set, relatively early, so we
3123 * "know" know the chip will have seen this by the time we process
3124 * the queue, and will re-interrupt if necessary. The processor
3125 * itself won't take the interrupt again until we return.
3126 */
3127 qib_write_kreg(dd, kr_intclear, istat);
3128
3129 /*
3130 * Handle kernel receive queues before checking for pio buffers
3131 * available since receives can overflow; piobuf waiters can afford
3132 * a few extra cycles, since they were waiting anyway.
3133 */
3134 ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK);
3135 if (ctxtrbits) {
3136 rmask = (1ULL << QIB_I_RCVAVAIL_LSB) |
3137 (1ULL << QIB_I_RCVURG_LSB);
3138 for (i = 0; i < dd->first_user_ctxt; i++) {
3139 if (ctxtrbits & rmask) {
3140 ctxtrbits &= ~rmask;
3141 if (dd->rcd[i])
3142 qib_kreceive(dd->rcd[i], NULL, &npkts);
3143 }
3144 rmask <<= 1;
3145 }
3146 if (ctxtrbits) {
3147 ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) |
3148 (ctxtrbits >> QIB_I_RCVURG_LSB);
3149 qib_handle_urcv(dd, ctxtrbits);
3150 }
3151 }
3152
3153 if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1)))
3154 sdma_7322_intr(dd, istat);
3155
3156 if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
3157 qib_ib_piobufavail(dd);
3158
3159 ret = IRQ_HANDLED;
3160 bail:
3161 return ret;
3162 }
3163
3164 /*
3165 * Dedicated receive packet available interrupt handler.
3166 */
3167 static irqreturn_t qib_7322pintr(int irq, void *data)
3168 {
3169 struct qib_ctxtdata *rcd = data;
3170 struct qib_devdata *dd = rcd->dd;
3171 u32 npkts;
3172
3173 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3174 /*
3175 * This return value is not great, but we do not want the
3176 * interrupt core code to remove our interrupt handler
3177 * because we don't appear to be handling an interrupt
3178 * during a chip reset.
3179 */
3180 return IRQ_HANDLED;
3181
3182 qib_stats.sps_ints++;
3183 if (dd->int_counter != (u32) -1)
3184 dd->int_counter++;
3185
3186 /* Clear the interrupt bit we expect to be set. */
3187 qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) |
3188 (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt);
3189
3190 qib_kreceive(rcd, NULL, &npkts);
3191
3192 return IRQ_HANDLED;
3193 }
3194
3195 /*
3196 * Dedicated Send buffer available interrupt handler.
3197 */
3198 static irqreturn_t qib_7322bufavail(int irq, void *data)
3199 {
3200 struct qib_devdata *dd = data;
3201
3202 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3203 /*
3204 * This return value is not great, but we do not want the
3205 * interrupt core code to remove our interrupt handler
3206 * because we don't appear to be handling an interrupt
3207 * during a chip reset.
3208 */
3209 return IRQ_HANDLED;
3210
3211 qib_stats.sps_ints++;
3212 if (dd->int_counter != (u32) -1)
3213 dd->int_counter++;
3214
3215 /* Clear the interrupt bit we expect to be set. */
3216 qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL);
3217
3218 /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */
3219 if (dd->flags & QIB_INITTED)
3220 qib_ib_piobufavail(dd);
3221 else
3222 qib_wantpiobuf_7322_intr(dd, 0);
3223
3224 return IRQ_HANDLED;
3225 }
3226
3227 /*
3228 * Dedicated Send DMA interrupt handler.
3229 */
3230 static irqreturn_t sdma_intr(int irq, void *data)
3231 {
3232 struct qib_pportdata *ppd = data;
3233 struct qib_devdata *dd = ppd->dd;
3234
3235 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3236 /*
3237 * This return value is not great, but we do not want the
3238 * interrupt core code to remove our interrupt handler
3239 * because we don't appear to be handling an interrupt
3240 * during a chip reset.
3241 */
3242 return IRQ_HANDLED;
3243
3244 qib_stats.sps_ints++;
3245 if (dd->int_counter != (u32) -1)
3246 dd->int_counter++;
3247
3248 /* Clear the interrupt bit we expect to be set. */
3249 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3250 INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0));
3251 qib_sdma_intr(ppd);
3252
3253 return IRQ_HANDLED;
3254 }
3255
3256 /*
3257 * Dedicated Send DMA idle interrupt handler.
3258 */
3259 static irqreturn_t sdma_idle_intr(int irq, void *data)
3260 {
3261 struct qib_pportdata *ppd = data;
3262 struct qib_devdata *dd = ppd->dd;
3263
3264 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3265 /*
3266 * This return value is not great, but we do not want the
3267 * interrupt core code to remove our interrupt handler
3268 * because we don't appear to be handling an interrupt
3269 * during a chip reset.
3270 */
3271 return IRQ_HANDLED;
3272
3273 qib_stats.sps_ints++;
3274 if (dd->int_counter != (u32) -1)
3275 dd->int_counter++;
3276
3277 /* Clear the interrupt bit we expect to be set. */
3278 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3279 INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0));
3280 qib_sdma_intr(ppd);
3281
3282 return IRQ_HANDLED;
3283 }
3284
3285 /*
3286 * Dedicated Send DMA progress interrupt handler.
3287 */
3288 static irqreturn_t sdma_progress_intr(int irq, void *data)
3289 {
3290 struct qib_pportdata *ppd = data;
3291 struct qib_devdata *dd = ppd->dd;
3292
3293 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3294 /*
3295 * This return value is not great, but we do not want the
3296 * interrupt core code to remove our interrupt handler
3297 * because we don't appear to be handling an interrupt
3298 * during a chip reset.
3299 */
3300 return IRQ_HANDLED;
3301
3302 qib_stats.sps_ints++;
3303 if (dd->int_counter != (u32) -1)
3304 dd->int_counter++;
3305
3306 /* Clear the interrupt bit we expect to be set. */
3307 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3308 INT_MASK_P(SDmaProgress, 1) :
3309 INT_MASK_P(SDmaProgress, 0));
3310 qib_sdma_intr(ppd);
3311
3312 return IRQ_HANDLED;
3313 }
3314
3315 /*
3316 * Dedicated Send DMA cleanup interrupt handler.
3317 */
3318 static irqreturn_t sdma_cleanup_intr(int irq, void *data)
3319 {
3320 struct qib_pportdata *ppd = data;
3321 struct qib_devdata *dd = ppd->dd;
3322
3323 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT)
3324 /*
3325 * This return value is not great, but we do not want the
3326 * interrupt core code to remove our interrupt handler
3327 * because we don't appear to be handling an interrupt
3328 * during a chip reset.
3329 */
3330 return IRQ_HANDLED;
3331
3332 qib_stats.sps_ints++;
3333 if (dd->int_counter != (u32) -1)
3334 dd->int_counter++;
3335
3336 /* Clear the interrupt bit we expect to be set. */
3337 qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ?
3338 INT_MASK_PM(SDmaCleanupDone, 1) :
3339 INT_MASK_PM(SDmaCleanupDone, 0));
3340 qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started);
3341
3342 return IRQ_HANDLED;
3343 }
3344
3345 #ifdef CONFIG_INFINIBAND_QIB_DCA
3346
3347 static void reset_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m)
3348 {
3349 if (!m->dca)
3350 return;
3351 qib_devinfo(dd->pcidev,
3352 "Disabling notifier on HCA %d irq %d\n",
3353 dd->unit,
3354 m->msix.vector);
3355 irq_set_affinity_notifier(
3356 m->msix.vector,
3357 NULL);
3358 m->notifier = NULL;
3359 }
3360
3361 static void setup_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m)
3362 {
3363 struct qib_irq_notify *n;
3364
3365 if (!m->dca)
3366 return;
3367 n = kzalloc(sizeof(*n), GFP_KERNEL);
3368 if (n) {
3369 int ret;
3370
3371 m->notifier = n;
3372 n->notify.irq = m->msix.vector;
3373 n->notify.notify = qib_irq_notifier_notify;
3374 n->notify.release = qib_irq_notifier_release;
3375 n->arg = m->arg;
3376 n->rcv = m->rcv;
3377 qib_devinfo(dd->pcidev,
3378 "set notifier irq %d rcv %d notify %p\n",
3379 n->notify.irq, n->rcv, &n->notify);
3380 ret = irq_set_affinity_notifier(
3381 n->notify.irq,
3382 &n->notify);
3383 if (ret) {
3384 m->notifier = NULL;
3385 kfree(n);
3386 }
3387 }
3388 }
3389
3390 #endif
3391
3392 /*
3393 * Set up our chip-specific interrupt handler.
3394 * The interrupt type has already been setup, so
3395 * we just need to do the registration and error checking.
3396 * If we are using MSIx interrupts, we may fall back to
3397 * INTx later, if the interrupt handler doesn't get called
3398 * within 1/2 second (see verify_interrupt()).
3399 */
3400 static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend)
3401 {
3402 int ret, i, msixnum;
3403 u64 redirect[6];
3404 u64 mask;
3405 const struct cpumask *local_mask;
3406 int firstcpu, secondcpu = 0, currrcvcpu = 0;
3407
3408 if (!dd->num_pports)
3409 return;
3410
3411 if (clearpend) {
3412 /*
3413 * if not switching interrupt types, be sure interrupts are
3414 * disabled, and then clear anything pending at this point,
3415 * because we are starting clean.
3416 */
3417 qib_7322_set_intr_state(dd, 0);
3418
3419 /* clear the reset error, init error/hwerror mask */
3420 qib_7322_init_hwerrors(dd);
3421
3422 /* clear any interrupt bits that might be set */
3423 qib_write_kreg(dd, kr_intclear, ~0ULL);
3424
3425 /* make sure no pending MSIx intr, and clear diag reg */
3426 qib_write_kreg(dd, kr_intgranted, ~0ULL);
3427 qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL);
3428 }
3429
3430 if (!dd->cspec->num_msix_entries) {
3431 /* Try to get INTx interrupt */
3432 try_intx:
3433 if (!dd->pcidev->irq) {
3434 qib_dev_err(dd,
3435 "irq is 0, BIOS error? Interrupts won't work\n");
3436 goto bail;
3437 }
3438 ret = request_irq(dd->pcidev->irq, qib_7322intr,
3439 IRQF_SHARED, QIB_DRV_NAME, dd);
3440 if (ret) {
3441 qib_dev_err(dd,
3442 "Couldn't setup INTx interrupt (irq=%d): %d\n",
3443 dd->pcidev->irq, ret);
3444 goto bail;
3445 }
3446 dd->cspec->irq = dd->pcidev->irq;
3447 dd->cspec->main_int_mask = ~0ULL;
3448 goto bail;
3449 }
3450
3451 /* Try to get MSIx interrupts */
3452 memset(redirect, 0, sizeof redirect);
3453 mask = ~0ULL;
3454 msixnum = 0;
3455 local_mask = cpumask_of_pcibus(dd->pcidev->bus);
3456 firstcpu = cpumask_first(local_mask);
3457 if (firstcpu >= nr_cpu_ids ||
3458 cpumask_weight(local_mask) == num_online_cpus()) {
3459 local_mask = topology_core_cpumask(0);
3460 firstcpu = cpumask_first(local_mask);
3461 }
3462 if (firstcpu < nr_cpu_ids) {
3463 secondcpu = cpumask_next(firstcpu, local_mask);
3464 if (secondcpu >= nr_cpu_ids)
3465 secondcpu = firstcpu;
3466 currrcvcpu = secondcpu;
3467 }
3468 for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) {
3469 irq_handler_t handler;
3470 void *arg;
3471 u64 val;
3472 int lsb, reg, sh;
3473 #ifdef CONFIG_INFINIBAND_QIB_DCA
3474 int dca = 0;
3475 #endif
3476
3477 dd->cspec->msix_entries[msixnum].
3478 name[sizeof(dd->cspec->msix_entries[msixnum].name) - 1]
3479 = '\0';
3480 if (i < ARRAY_SIZE(irq_table)) {
3481 if (irq_table[i].port) {
3482 /* skip if for a non-configured port */
3483 if (irq_table[i].port > dd->num_pports)
3484 continue;
3485 arg = dd->pport + irq_table[i].port - 1;
3486 } else
3487 arg = dd;
3488 #ifdef CONFIG_INFINIBAND_QIB_DCA
3489 dca = irq_table[i].dca;
3490 #endif
3491 lsb = irq_table[i].lsb;
3492 handler = irq_table[i].handler;
3493 snprintf(dd->cspec->msix_entries[msixnum].name,
3494 sizeof(dd->cspec->msix_entries[msixnum].name)
3495 - 1,
3496 QIB_DRV_NAME "%d%s", dd->unit,
3497 irq_table[i].name);
3498 } else {
3499 unsigned ctxt;
3500
3501 ctxt = i - ARRAY_SIZE(irq_table);
3502 /* per krcvq context receive interrupt */
3503 arg = dd->rcd[ctxt];
3504 if (!arg)
3505 continue;
3506 if (qib_krcvq01_no_msi && ctxt < 2)
3507 continue;
3508 #ifdef CONFIG_INFINIBAND_QIB_DCA
3509 dca = 1;
3510 #endif
3511 lsb = QIB_I_RCVAVAIL_LSB + ctxt;
3512 handler = qib_7322pintr;
3513 snprintf(dd->cspec->msix_entries[msixnum].name,
3514 sizeof(dd->cspec->msix_entries[msixnum].name)
3515 - 1,
3516 QIB_DRV_NAME "%d (kctx)", dd->unit);
3517 }
3518 ret = request_irq(
3519 dd->cspec->msix_entries[msixnum].msix.vector,
3520 handler, 0, dd->cspec->msix_entries[msixnum].name,
3521 arg);
3522 if (ret) {
3523 /*
3524 * Shouldn't happen since the enable said we could
3525 * have as many as we are trying to setup here.
3526 */
3527 qib_dev_err(dd,
3528 "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n",
3529 msixnum,
3530 dd->cspec->msix_entries[msixnum].msix.vector,
3531 ret);
3532 qib_7322_nomsix(dd);
3533 goto try_intx;
3534 }
3535 dd->cspec->msix_entries[msixnum].arg = arg;
3536 #ifdef CONFIG_INFINIBAND_QIB_DCA
3537 dd->cspec->msix_entries[msixnum].dca = dca;
3538 dd->cspec->msix_entries[msixnum].rcv =
3539 handler == qib_7322pintr;
3540 #endif
3541 if (lsb >= 0) {
3542 reg = lsb / IBA7322_REDIRECT_VEC_PER_REG;
3543 sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) *
3544 SYM_LSB(IntRedirect0, vec1);
3545 mask &= ~(1ULL << lsb);
3546 redirect[reg] |= ((u64) msixnum) << sh;
3547 }
3548 val = qib_read_kreg64(dd, 2 * msixnum + 1 +
3549 (QIB_7322_MsixTable_OFFS / sizeof(u64)));
3550 if (firstcpu < nr_cpu_ids &&
3551 zalloc_cpumask_var(
3552 &dd->cspec->msix_entries[msixnum].mask,
3553 GFP_KERNEL)) {
3554 if (handler == qib_7322pintr) {
3555 cpumask_set_cpu(currrcvcpu,
3556 dd->cspec->msix_entries[msixnum].mask);
3557 currrcvcpu = cpumask_next(currrcvcpu,
3558 local_mask);
3559 if (currrcvcpu >= nr_cpu_ids)
3560 currrcvcpu = secondcpu;
3561 } else {
3562 cpumask_set_cpu(firstcpu,
3563 dd->cspec->msix_entries[msixnum].mask);
3564 }
3565 irq_set_affinity_hint(
3566 dd->cspec->msix_entries[msixnum].msix.vector,
3567 dd->cspec->msix_entries[msixnum].mask);
3568 }
3569 msixnum++;
3570 }
3571 /* Initialize the vector mapping */
3572 for (i = 0; i < ARRAY_SIZE(redirect); i++)
3573 qib_write_kreg(dd, kr_intredirect + i, redirect[i]);
3574 dd->cspec->main_int_mask = mask;
3575 tasklet_init(&dd->error_tasklet, qib_error_tasklet,
3576 (unsigned long)dd);
3577 bail:;
3578 }
3579
3580 /**
3581 * qib_7322_boardname - fill in the board name and note features
3582 * @dd: the qlogic_ib device
3583 *
3584 * info will be based on the board revision register
3585 */
3586 static unsigned qib_7322_boardname(struct qib_devdata *dd)
3587 {
3588 /* Will need enumeration of board-types here */
3589 char *n;
3590 u32 boardid, namelen;
3591 unsigned features = DUAL_PORT_CAP;
3592
3593 boardid = SYM_FIELD(dd->revision, Revision, BoardID);
3594
3595 switch (boardid) {
3596 case 0:
3597 n = "InfiniPath_QLE7342_Emulation";
3598 break;
3599 case 1:
3600 n = "InfiniPath_QLE7340";
3601 dd->flags |= QIB_HAS_QSFP;
3602 features = PORT_SPD_CAP;
3603 break;
3604 case 2:
3605 n = "InfiniPath_QLE7342";
3606 dd->flags |= QIB_HAS_QSFP;
3607 break;
3608 case 3:
3609 n = "InfiniPath_QMI7342";
3610 break;
3611 case 4:
3612 n = "InfiniPath_Unsupported7342";
3613 qib_dev_err(dd, "Unsupported version of QMH7342\n");
3614 features = 0;
3615 break;
3616 case BOARD_QMH7342:
3617 n = "InfiniPath_QMH7342";
3618 features = 0x24;
3619 break;
3620 case BOARD_QME7342:
3621 n = "InfiniPath_QME7342";
3622 break;
3623 case 8:
3624 n = "InfiniPath_QME7362";
3625 dd->flags |= QIB_HAS_QSFP;
3626 break;
3627 case 15:
3628 n = "InfiniPath_QLE7342_TEST";
3629 dd->flags |= QIB_HAS_QSFP;
3630 break;
3631 default:
3632 n = "InfiniPath_QLE73xy_UNKNOWN";
3633 qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid);
3634 break;
3635 }
3636 dd->board_atten = 1; /* index into txdds_Xdr */
3637
3638 namelen = strlen(n) + 1;
3639 dd->boardname = kmalloc(namelen, GFP_KERNEL);
3640 if (!dd->boardname)
3641 qib_dev_err(dd, "Failed allocation for board name: %s\n", n);
3642 else
3643 snprintf(dd->boardname, namelen, "%s", n);
3644
3645 snprintf(dd->boardversion, sizeof(dd->boardversion),
3646 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
3647 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
3648 (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch),
3649 dd->majrev, dd->minrev,
3650 (unsigned)SYM_FIELD(dd->revision, Revision_R, SW));
3651
3652 if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) {
3653 qib_devinfo(dd->pcidev,
3654 "IB%u: Forced to single port mode by module parameter\n",
3655 dd->unit);
3656 features &= PORT_SPD_CAP;
3657 }
3658
3659 return features;
3660 }
3661
3662 /*
3663 * This routine sleeps, so it can only be called from user context, not
3664 * from interrupt context.
3665 */
3666 static int qib_do_7322_reset(struct qib_devdata *dd)
3667 {
3668 u64 val;
3669 u64 *msix_vecsave;
3670 int i, msix_entries, ret = 1;
3671 u16 cmdval;
3672 u8 int_line, clinesz;
3673 unsigned long flags;
3674
3675 /* Use dev_err so it shows up in logs, etc. */
3676 qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
3677
3678 qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
3679
3680 msix_entries = dd->cspec->num_msix_entries;
3681
3682 /* no interrupts till re-initted */
3683 qib_7322_set_intr_state(dd, 0);
3684
3685 if (msix_entries) {
3686 qib_7322_nomsix(dd);
3687 /* can be up to 512 bytes, too big for stack */
3688 msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries *
3689 sizeof(u64), GFP_KERNEL);
3690 if (!msix_vecsave)
3691 qib_dev_err(dd, "No mem to save MSIx data\n");
3692 } else
3693 msix_vecsave = NULL;
3694
3695 /*
3696 * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector
3697 * info that is set up by the BIOS, so we have to save and restore
3698 * it ourselves. There is some risk something could change it,
3699 * after we save it, but since we have disabled the MSIx, it
3700 * shouldn't be touched...
3701 */
3702 for (i = 0; i < msix_entries; i++) {
3703 u64 vecaddr, vecdata;
3704 vecaddr = qib_read_kreg64(dd, 2 * i +
3705 (QIB_7322_MsixTable_OFFS / sizeof(u64)));
3706 vecdata = qib_read_kreg64(dd, 1 + 2 * i +
3707 (QIB_7322_MsixTable_OFFS / sizeof(u64)));
3708 if (msix_vecsave) {
3709 msix_vecsave[2 * i] = vecaddr;
3710 /* save it without the masked bit set */
3711 msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL;
3712 }
3713 }
3714
3715 dd->pport->cpspec->ibdeltainprog = 0;
3716 dd->pport->cpspec->ibsymdelta = 0;
3717 dd->pport->cpspec->iblnkerrdelta = 0;
3718 dd->pport->cpspec->ibmalfdelta = 0;
3719 dd->int_counter = 0; /* so we check interrupts work again */
3720
3721 /*
3722 * Keep chip from being accessed until we are ready. Use
3723 * writeq() directly, to allow the write even though QIB_PRESENT
3724 * isn't set.
3725 */
3726 dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
3727 dd->flags |= QIB_DOING_RESET;
3728 val = dd->control | QLOGIC_IB_C_RESET;
3729 writeq(val, &dd->kregbase[kr_control]);
3730
3731 for (i = 1; i <= 5; i++) {
3732 /*
3733 * Allow MBIST, etc. to complete; longer on each retry.
3734 * We sometimes get machine checks from bus timeout if no
3735 * response, so for now, make it *really* long.
3736 */
3737 msleep(1000 + (1 + i) * 3000);
3738
3739 qib_pcie_reenable(dd, cmdval, int_line, clinesz);
3740
3741 /*
3742 * Use readq directly, so we don't need to mark it as PRESENT
3743 * until we get a successful indication that all is well.
3744 */
3745 val = readq(&dd->kregbase[kr_revision]);
3746 if (val == dd->revision)
3747 break;
3748 if (i == 5) {
3749 qib_dev_err(dd,
3750 "Failed to initialize after reset, unusable\n");
3751 ret = 0;
3752 goto bail;
3753 }
3754 }
3755
3756 dd->flags |= QIB_PRESENT; /* it's back */
3757
3758 if (msix_entries) {
3759 /* restore the MSIx vector address and data if saved above */
3760 for (i = 0; i < msix_entries; i++) {
3761 dd->cspec->msix_entries[i].msix.entry = i;
3762 if (!msix_vecsave || !msix_vecsave[2 * i])
3763 continue;
3764 qib_write_kreg(dd, 2 * i +
3765 (QIB_7322_MsixTable_OFFS / sizeof(u64)),
3766 msix_vecsave[2 * i]);
3767 qib_write_kreg(dd, 1 + 2 * i +
3768 (QIB_7322_MsixTable_OFFS / sizeof(u64)),
3769 msix_vecsave[1 + 2 * i]);
3770 }
3771 }
3772
3773 /* initialize the remaining registers. */
3774 for (i = 0; i < dd->num_pports; ++i)
3775 write_7322_init_portregs(&dd->pport[i]);
3776 write_7322_initregs(dd);
3777
3778 if (qib_pcie_params(dd, dd->lbus_width,
3779 &dd->cspec->num_msix_entries,
3780 dd->cspec->msix_entries))
3781 qib_dev_err(dd,
3782 "Reset failed to setup PCIe or interrupts; continuing anyway\n");
3783
3784 qib_setup_7322_interrupt(dd, 1);
3785
3786 for (i = 0; i < dd->num_pports; ++i) {
3787 struct qib_pportdata *ppd = &dd->pport[i];
3788
3789 spin_lock_irqsave(&ppd->lflags_lock, flags);
3790 ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
3791 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
3792 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
3793 }
3794
3795 bail:
3796 dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */
3797 kfree(msix_vecsave);
3798 return ret;
3799 }
3800
3801 /**
3802 * qib_7322_put_tid - write a TID to the chip
3803 * @dd: the qlogic_ib device
3804 * @tidptr: pointer to the expected TID (in chip) to update
3805 * @tidtype: 0 for eager, 1 for expected
3806 * @pa: physical address of in memory buffer; tidinvalid if freeing
3807 */
3808 static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
3809 u32 type, unsigned long pa)
3810 {
3811 if (!(dd->flags & QIB_PRESENT))
3812 return;
3813 if (pa != dd->tidinvalid) {
3814 u64 chippa = pa >> IBA7322_TID_PA_SHIFT;
3815
3816 /* paranoia checks */
3817 if (pa != (chippa << IBA7322_TID_PA_SHIFT)) {
3818 qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
3819 pa);
3820 return;
3821 }
3822 if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) {
3823 qib_dev_err(dd,
3824 "Physical page address 0x%lx larger than supported\n",
3825 pa);
3826 return;
3827 }
3828
3829 if (type == RCVHQ_RCV_TYPE_EAGER)
3830 chippa |= dd->tidtemplate;
3831 else /* for now, always full 4KB page */
3832 chippa |= IBA7322_TID_SZ_4K;
3833 pa = chippa;
3834 }
3835 writeq(pa, tidptr);
3836 mmiowb();
3837 }
3838
3839 /**
3840 * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager
3841 * @dd: the qlogic_ib device
3842 * @ctxt: the ctxt
3843 *
3844 * clear all TID entries for a ctxt, expected and eager.
3845 * Used from qib_close().
3846 */
3847 static void qib_7322_clear_tids(struct qib_devdata *dd,
3848 struct qib_ctxtdata *rcd)
3849 {
3850 u64 __iomem *tidbase;
3851 unsigned long tidinv;
3852 u32 ctxt;
3853 int i;
3854
3855 if (!dd->kregbase || !rcd)
3856 return;
3857
3858 ctxt = rcd->ctxt;
3859
3860 tidinv = dd->tidinvalid;
3861 tidbase = (u64 __iomem *)
3862 ((char __iomem *) dd->kregbase +
3863 dd->rcvtidbase +
3864 ctxt * dd->rcvtidcnt * sizeof(*tidbase));
3865
3866 for (i = 0; i < dd->rcvtidcnt; i++)
3867 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
3868 tidinv);
3869
3870 tidbase = (u64 __iomem *)
3871 ((char __iomem *) dd->kregbase +
3872 dd->rcvegrbase +
3873 rcd->rcvegr_tid_base * sizeof(*tidbase));
3874
3875 for (i = 0; i < rcd->rcvegrcnt; i++)
3876 qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
3877 tidinv);
3878 }
3879
3880 /**
3881 * qib_7322_tidtemplate - setup constants for TID updates
3882 * @dd: the qlogic_ib device
3883 *
3884 * We setup stuff that we use a lot, to avoid calculating each time
3885 */
3886 static void qib_7322_tidtemplate(struct qib_devdata *dd)
3887 {
3888 /*
3889 * For now, we always allocate 4KB buffers (at init) so we can
3890 * receive max size packets. We may want a module parameter to
3891 * specify 2KB or 4KB and/or make it per port instead of per device
3892 * for those who want to reduce memory footprint. Note that the
3893 * rcvhdrentsize size must be large enough to hold the largest
3894 * IB header (currently 96 bytes) that we expect to handle (plus of
3895 * course the 2 dwords of RHF).
3896 */
3897 if (dd->rcvegrbufsize == 2048)
3898 dd->tidtemplate = IBA7322_TID_SZ_2K;
3899 else if (dd->rcvegrbufsize == 4096)
3900 dd->tidtemplate = IBA7322_TID_SZ_4K;
3901 dd->tidinvalid = 0;
3902 }
3903
3904 /**
3905 * qib_init_7322_get_base_info - set chip-specific flags for user code
3906 * @rcd: the qlogic_ib ctxt
3907 * @kbase: qib_base_info pointer
3908 *
3909 * We set the PCIE flag because the lower bandwidth on PCIe vs
3910 * HyperTransport can affect some user packet algorithims.
3911 */
3912
3913 static int qib_7322_get_base_info(struct qib_ctxtdata *rcd,
3914 struct qib_base_info *kinfo)
3915 {
3916 kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP |
3917 QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL |
3918 QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA;
3919 if (rcd->dd->cspec->r1)
3920 kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK;
3921 if (rcd->dd->flags & QIB_USE_SPCL_TRIG)
3922 kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER;
3923
3924 return 0;
3925 }
3926
3927 static struct qib_message_header *
3928 qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
3929 {
3930 u32 offset = qib_hdrget_offset(rhf_addr);
3931
3932 return (struct qib_message_header *)
3933 (rhf_addr - dd->rhf_offset + offset);
3934 }
3935
3936 /*
3937 * Configure number of contexts.
3938 */
3939 static void qib_7322_config_ctxts(struct qib_devdata *dd)
3940 {
3941 unsigned long flags;
3942 u32 nchipctxts;
3943
3944 nchipctxts = qib_read_kreg32(dd, kr_contextcnt);
3945 dd->cspec->numctxts = nchipctxts;
3946 if (qib_n_krcv_queues > 1 && dd->num_pports) {
3947 dd->first_user_ctxt = NUM_IB_PORTS +
3948 (qib_n_krcv_queues - 1) * dd->num_pports;
3949 if (dd->first_user_ctxt > nchipctxts)
3950 dd->first_user_ctxt = nchipctxts;
3951 dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports;
3952 } else {
3953 dd->first_user_ctxt = NUM_IB_PORTS;
3954 dd->n_krcv_queues = 1;
3955 }
3956
3957 if (!qib_cfgctxts) {
3958 int nctxts = dd->first_user_ctxt + num_online_cpus();
3959
3960 if (nctxts <= 6)
3961 dd->ctxtcnt = 6;
3962 else if (nctxts <= 10)
3963 dd->ctxtcnt = 10;
3964 else if (nctxts <= nchipctxts)
3965 dd->ctxtcnt = nchipctxts;
3966 } else if (qib_cfgctxts < dd->num_pports)
3967 dd->ctxtcnt = dd->num_pports;
3968 else if (qib_cfgctxts <= nchipctxts)
3969 dd->ctxtcnt = qib_cfgctxts;
3970 if (!dd->ctxtcnt) /* none of the above, set to max */
3971 dd->ctxtcnt = nchipctxts;
3972
3973 /*
3974 * Chip can be configured for 6, 10, or 18 ctxts, and choice
3975 * affects number of eager TIDs per ctxt (1K, 2K, 4K).
3976 * Lock to be paranoid about later motion, etc.
3977 */
3978 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
3979 if (dd->ctxtcnt > 10)
3980 dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg);
3981 else if (dd->ctxtcnt > 6)
3982 dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg);
3983 /* else configure for default 6 receive ctxts */
3984
3985 /* The XRC opcode is 5. */
3986 dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode);
3987
3988 /*
3989 * RcvCtrl *must* be written here so that the
3990 * chip understands how to change rcvegrcnt below.
3991 */
3992 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
3993 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
3994
3995 /* kr_rcvegrcnt changes based on the number of contexts enabled */
3996 dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
3997 if (qib_rcvhdrcnt)
3998 dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt);
3999 else
4000 dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt,
4001 dd->num_pports > 1 ? 1024U : 2048U);
4002 }
4003
4004 static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which)
4005 {
4006
4007 int lsb, ret = 0;
4008 u64 maskr; /* right-justified mask */
4009
4010 switch (which) {
4011
4012 case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */
4013 ret = ppd->link_width_enabled;
4014 goto done;
4015
4016 case QIB_IB_CFG_LWID: /* Get currently active Link-width */
4017 ret = ppd->link_width_active;
4018 goto done;
4019
4020 case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
4021 ret = ppd->link_speed_enabled;
4022 goto done;
4023
4024 case QIB_IB_CFG_SPD: /* Get current Link spd */
4025 ret = ppd->link_speed_active;
4026 goto done;
4027
4028 case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
4029 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
4030 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
4031 break;
4032
4033 case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
4034 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
4035 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
4036 break;
4037
4038 case QIB_IB_CFG_LINKLATENCY:
4039 ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) &
4040 SYM_MASK(IBCStatusB_0, LinkRoundTripLatency);
4041 goto done;
4042
4043 case QIB_IB_CFG_OP_VLS:
4044 ret = ppd->vls_operational;
4045 goto done;
4046
4047 case QIB_IB_CFG_VL_HIGH_CAP:
4048 ret = 16;
4049 goto done;
4050
4051 case QIB_IB_CFG_VL_LOW_CAP:
4052 ret = 16;
4053 goto done;
4054
4055 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
4056 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
4057 OverrunThreshold);
4058 goto done;
4059
4060 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
4061 ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
4062 PhyerrThreshold);
4063 goto done;
4064
4065 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
4066 /* will only take effect when the link state changes */
4067 ret = (ppd->cpspec->ibcctrl_a &
4068 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ?
4069 IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
4070 goto done;
4071
4072 case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
4073 lsb = IBA7322_IBC_HRTBT_LSB;
4074 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */
4075 break;
4076
4077 case QIB_IB_CFG_PMA_TICKS:
4078 /*
4079 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs
4080 * Since the clock is always 250MHz, the value is 3, 1 or 0.
4081 */
4082 if (ppd->link_speed_active == QIB_IB_QDR)
4083 ret = 3;
4084 else if (ppd->link_speed_active == QIB_IB_DDR)
4085 ret = 1;
4086 else
4087 ret = 0;
4088 goto done;
4089
4090 default:
4091 ret = -EINVAL;
4092 goto done;
4093 }
4094 ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr);
4095 done:
4096 return ret;
4097 }
4098
4099 /*
4100 * Below again cribbed liberally from older version. Do not lean
4101 * heavily on it.
4102 */
4103 #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB
4104 #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \
4105 | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16))
4106
4107 static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
4108 {
4109 struct qib_devdata *dd = ppd->dd;
4110 u64 maskr; /* right-justified mask */
4111 int lsb, ret = 0;
4112 u16 lcmd, licmd;
4113 unsigned long flags;
4114
4115 switch (which) {
4116 case QIB_IB_CFG_LIDLMC:
4117 /*
4118 * Set LID and LMC. Combined to avoid possible hazard
4119 * caller puts LMC in 16MSbits, DLID in 16LSbits of val
4120 */
4121 lsb = IBA7322_IBC_DLIDLMC_SHIFT;
4122 maskr = IBA7322_IBC_DLIDLMC_MASK;
4123 /*
4124 * For header-checking, the SLID in the packet will
4125 * be masked with SendIBSLMCMask, and compared
4126 * with SendIBSLIDAssignMask. Make sure we do not
4127 * set any bits not covered by the mask, or we get
4128 * false-positives.
4129 */
4130 qib_write_kreg_port(ppd, krp_sendslid,
4131 val & (val >> 16) & SendIBSLIDAssignMask);
4132 qib_write_kreg_port(ppd, krp_sendslidmask,
4133 (val >> 16) & SendIBSLMCMask);
4134 break;
4135
4136 case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */
4137 ppd->link_width_enabled = val;
4138 /* convert IB value to chip register value */
4139 if (val == IB_WIDTH_1X)
4140 val = 0;
4141 else if (val == IB_WIDTH_4X)
4142 val = 1;
4143 else
4144 val = 3;
4145 maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS);
4146 lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS);
4147 break;
4148
4149 case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */
4150 /*
4151 * As with width, only write the actual register if the
4152 * link is currently down, otherwise takes effect on next
4153 * link change. Since setting is being explicitly requested
4154 * (via MAD or sysfs), clear autoneg failure status if speed
4155 * autoneg is enabled.
4156 */
4157 ppd->link_speed_enabled = val;
4158 val <<= IBA7322_IBC_SPEED_LSB;
4159 maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK |
4160 IBA7322_IBC_MAX_SPEED_MASK;
4161 if (val & (val - 1)) {
4162 /* Muliple speeds enabled */
4163 val |= IBA7322_IBC_IBTA_1_2_MASK |
4164 IBA7322_IBC_MAX_SPEED_MASK;
4165 spin_lock_irqsave(&ppd->lflags_lock, flags);
4166 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
4167 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
4168 } else if (val & IBA7322_IBC_SPEED_QDR)
4169 val |= IBA7322_IBC_IBTA_1_2_MASK;
4170 /* IBTA 1.2 mode + min/max + speed bits are contiguous */
4171 lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE);
4172 break;
4173
4174 case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
4175 lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
4176 maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP);
4177 break;
4178
4179 case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
4180 lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
4181 maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED);
4182 break;
4183
4184 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
4185 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
4186 OverrunThreshold);
4187 if (maskr != val) {
4188 ppd->cpspec->ibcctrl_a &=
4189 ~SYM_MASK(IBCCtrlA_0, OverrunThreshold);
4190 ppd->cpspec->ibcctrl_a |= (u64) val <<
4191 SYM_LSB(IBCCtrlA_0, OverrunThreshold);
4192 qib_write_kreg_port(ppd, krp_ibcctrl_a,
4193 ppd->cpspec->ibcctrl_a);
4194 qib_write_kreg(dd, kr_scratch, 0ULL);
4195 }
4196 goto bail;
4197
4198 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
4199 maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0,
4200 PhyerrThreshold);
4201 if (maskr != val) {
4202 ppd->cpspec->ibcctrl_a &=
4203 ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold);
4204 ppd->cpspec->ibcctrl_a |= (u64) val <<
4205 SYM_LSB(IBCCtrlA_0, PhyerrThreshold);
4206 qib_write_kreg_port(ppd, krp_ibcctrl_a,
4207 ppd->cpspec->ibcctrl_a);
4208 qib_write_kreg(dd, kr_scratch, 0ULL);
4209 }
4210 goto bail;
4211
4212 case QIB_IB_CFG_PKEYS: /* update pkeys */
4213 maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
4214 ((u64) ppd->pkeys[2] << 32) |
4215 ((u64) ppd->pkeys[3] << 48);
4216 qib_write_kreg_port(ppd, krp_partitionkey, maskr);
4217 goto bail;
4218
4219 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
4220 /* will only take effect when the link state changes */
4221 if (val == IB_LINKINITCMD_POLL)
4222 ppd->cpspec->ibcctrl_a &=
4223 ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState);
4224 else /* SLEEP */
4225 ppd->cpspec->ibcctrl_a |=
4226 SYM_MASK(IBCCtrlA_0, LinkDownDefaultState);
4227 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
4228 qib_write_kreg(dd, kr_scratch, 0ULL);
4229 goto bail;
4230
4231 case QIB_IB_CFG_MTU: /* update the MTU in IBC */
4232 /*
4233 * Update our housekeeping variables, and set IBC max
4234 * size, same as init code; max IBC is max we allow in
4235 * buffer, less the qword pbc, plus 1 for ICRC, in dwords
4236 * Set even if it's unchanged, print debug message only
4237 * on changes.
4238 */
4239 val = (ppd->ibmaxlen >> 2) + 1;
4240 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen);
4241 ppd->cpspec->ibcctrl_a |= (u64)val <<
4242 SYM_LSB(IBCCtrlA_0, MaxPktLen);
4243 qib_write_kreg_port(ppd, krp_ibcctrl_a,
4244 ppd->cpspec->ibcctrl_a);
4245 qib_write_kreg(dd, kr_scratch, 0ULL);
4246 goto bail;
4247
4248 case QIB_IB_CFG_LSTATE: /* set the IB link state */
4249 switch (val & 0xffff0000) {
4250 case IB_LINKCMD_DOWN:
4251 lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
4252 ppd->cpspec->ibmalfusesnap = 1;
4253 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd,
4254 crp_errlink);
4255 if (!ppd->cpspec->ibdeltainprog &&
4256 qib_compat_ddr_negotiate) {
4257 ppd->cpspec->ibdeltainprog = 1;
4258 ppd->cpspec->ibsymsnap =
4259 read_7322_creg32_port(ppd,
4260 crp_ibsymbolerr);
4261 ppd->cpspec->iblnkerrsnap =
4262 read_7322_creg32_port(ppd,
4263 crp_iblinkerrrecov);
4264 }
4265 break;
4266
4267 case IB_LINKCMD_ARMED:
4268 lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
4269 if (ppd->cpspec->ibmalfusesnap) {
4270 ppd->cpspec->ibmalfusesnap = 0;
4271 ppd->cpspec->ibmalfdelta +=
4272 read_7322_creg32_port(ppd,
4273 crp_errlink) -
4274 ppd->cpspec->ibmalfsnap;
4275 }
4276 break;
4277
4278 case IB_LINKCMD_ACTIVE:
4279 lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
4280 break;
4281
4282 default:
4283 ret = -EINVAL;
4284 qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
4285 goto bail;
4286 }
4287 switch (val & 0xffff) {
4288 case IB_LINKINITCMD_NOP:
4289 licmd = 0;
4290 break;
4291
4292 case IB_LINKINITCMD_POLL:
4293 licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
4294 break;
4295
4296 case IB_LINKINITCMD_SLEEP:
4297 licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
4298 break;
4299
4300 case IB_LINKINITCMD_DISABLE:
4301 licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
4302 ppd->cpspec->chase_end = 0;
4303 /*
4304 * stop state chase counter and timer, if running.
4305 * wait forpending timer, but don't clear .data (ppd)!
4306 */
4307 if (ppd->cpspec->chase_timer.expires) {
4308 del_timer_sync(&ppd->cpspec->chase_timer);
4309 ppd->cpspec->chase_timer.expires = 0;
4310 }
4311 break;
4312
4313 default:
4314 ret = -EINVAL;
4315 qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
4316 val & 0xffff);
4317 goto bail;
4318 }
4319 qib_set_ib_7322_lstate(ppd, lcmd, licmd);
4320 goto bail;
4321
4322 case QIB_IB_CFG_OP_VLS:
4323 if (ppd->vls_operational != val) {
4324 ppd->vls_operational = val;
4325 set_vls(ppd);
4326 }
4327 goto bail;
4328
4329 case QIB_IB_CFG_VL_HIGH_LIMIT:
4330 qib_write_kreg_port(ppd, krp_highprio_limit, val);
4331 goto bail;
4332
4333 case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
4334 if (val > 3) {
4335 ret = -EINVAL;
4336 goto bail;
4337 }
4338 lsb = IBA7322_IBC_HRTBT_LSB;
4339 maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */
4340 break;
4341
4342 case QIB_IB_CFG_PORT:
4343 /* val is the port number of the switch we are connected to. */
4344 if (ppd->dd->cspec->r1) {
4345 cancel_delayed_work(&ppd->cpspec->ipg_work);
4346 ppd->cpspec->ipg_tries = 0;
4347 }
4348 goto bail;
4349
4350 default:
4351 ret = -EINVAL;
4352 goto bail;
4353 }
4354 ppd->cpspec->ibcctrl_b &= ~(maskr << lsb);
4355 ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb);
4356 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
4357 qib_write_kreg(dd, kr_scratch, 0);
4358 bail:
4359 return ret;
4360 }
4361
4362 static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what)
4363 {
4364 int ret = 0;
4365 u64 val, ctrlb;
4366
4367 /* only IBC loopback, may add serdes and xgxs loopbacks later */
4368 if (!strncmp(what, "ibc", 3)) {
4369 ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0,
4370 Loopback);
4371 val = 0; /* disable heart beat, so link will come up */
4372 qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
4373 ppd->dd->unit, ppd->port);
4374 } else if (!strncmp(what, "off", 3)) {
4375 ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0,
4376 Loopback);
4377 /* enable heart beat again */
4378 val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB;
4379 qib_devinfo(ppd->dd->pcidev,
4380 "Disabling IB%u:%u IBC loopback (normal)\n",
4381 ppd->dd->unit, ppd->port);
4382 } else
4383 ret = -EINVAL;
4384 if (!ret) {
4385 qib_write_kreg_port(ppd, krp_ibcctrl_a,
4386 ppd->cpspec->ibcctrl_a);
4387 ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK
4388 << IBA7322_IBC_HRTBT_LSB);
4389 ppd->cpspec->ibcctrl_b = ctrlb | val;
4390 qib_write_kreg_port(ppd, krp_ibcctrl_b,
4391 ppd->cpspec->ibcctrl_b);
4392 qib_write_kreg(ppd->dd, kr_scratch, 0);
4393 }
4394 return ret;
4395 }
4396
4397 static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno,
4398 struct ib_vl_weight_elem *vl)
4399 {
4400 unsigned i;
4401
4402 for (i = 0; i < 16; i++, regno++, vl++) {
4403 u32 val = qib_read_kreg_port(ppd, regno);
4404
4405 vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) &
4406 SYM_RMASK(LowPriority0_0, VirtualLane);
4407 vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) &
4408 SYM_RMASK(LowPriority0_0, Weight);
4409 }
4410 }
4411
4412 static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno,
4413 struct ib_vl_weight_elem *vl)
4414 {
4415 unsigned i;
4416
4417 for (i = 0; i < 16; i++, regno++, vl++) {
4418 u64 val;
4419
4420 val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) <<
4421 SYM_LSB(LowPriority0_0, VirtualLane)) |
4422 ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) <<
4423 SYM_LSB(LowPriority0_0, Weight));
4424 qib_write_kreg_port(ppd, regno, val);
4425 }
4426 if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) {
4427 struct qib_devdata *dd = ppd->dd;
4428 unsigned long flags;
4429
4430 spin_lock_irqsave(&dd->sendctrl_lock, flags);
4431 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn);
4432 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
4433 qib_write_kreg(dd, kr_scratch, 0);
4434 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4435 }
4436 }
4437
4438 static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t)
4439 {
4440 switch (which) {
4441 case QIB_IB_TBL_VL_HIGH_ARB:
4442 get_vl_weights(ppd, krp_highprio_0, t);
4443 break;
4444
4445 case QIB_IB_TBL_VL_LOW_ARB:
4446 get_vl_weights(ppd, krp_lowprio_0, t);
4447 break;
4448
4449 default:
4450 return -EINVAL;
4451 }
4452 return 0;
4453 }
4454
4455 static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t)
4456 {
4457 switch (which) {
4458 case QIB_IB_TBL_VL_HIGH_ARB:
4459 set_vl_weights(ppd, krp_highprio_0, t);
4460 break;
4461
4462 case QIB_IB_TBL_VL_LOW_ARB:
4463 set_vl_weights(ppd, krp_lowprio_0, t);
4464 break;
4465
4466 default:
4467 return -EINVAL;
4468 }
4469 return 0;
4470 }
4471
4472 static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd,
4473 u32 updegr, u32 egrhd, u32 npkts)
4474 {
4475 /*
4476 * Need to write timeout register before updating rcvhdrhead to ensure
4477 * that the timer is enabled on reception of a packet.
4478 */
4479 if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT)
4480 adjust_rcv_timeout(rcd, npkts);
4481 if (updegr)
4482 qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
4483 mmiowb();
4484 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
4485 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
4486 mmiowb();
4487 }
4488
4489 static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd)
4490 {
4491 u32 head, tail;
4492
4493 head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
4494 if (rcd->rcvhdrtail_kvaddr)
4495 tail = qib_get_rcvhdrtail(rcd);
4496 else
4497 tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
4498 return head == tail;
4499 }
4500
4501 #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \
4502 QIB_RCVCTRL_CTXT_DIS | \
4503 QIB_RCVCTRL_TIDFLOW_ENB | \
4504 QIB_RCVCTRL_TIDFLOW_DIS | \
4505 QIB_RCVCTRL_TAILUPD_ENB | \
4506 QIB_RCVCTRL_TAILUPD_DIS | \
4507 QIB_RCVCTRL_INTRAVAIL_ENB | \
4508 QIB_RCVCTRL_INTRAVAIL_DIS | \
4509 QIB_RCVCTRL_BP_ENB | \
4510 QIB_RCVCTRL_BP_DIS)
4511
4512 #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \
4513 QIB_RCVCTRL_CTXT_DIS | \
4514 QIB_RCVCTRL_PKEY_DIS | \
4515 QIB_RCVCTRL_PKEY_ENB)
4516
4517 /*
4518 * Modify the RCVCTRL register in chip-specific way. This
4519 * is a function because bit positions and (future) register
4520 * location is chip-specifc, but the needed operations are
4521 * generic. <op> is a bit-mask because we often want to
4522 * do multiple modifications.
4523 */
4524 static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op,
4525 int ctxt)
4526 {
4527 struct qib_devdata *dd = ppd->dd;
4528 struct qib_ctxtdata *rcd;
4529 u64 mask, val;
4530 unsigned long flags;
4531
4532 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
4533
4534 if (op & QIB_RCVCTRL_TIDFLOW_ENB)
4535 dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable);
4536 if (op & QIB_RCVCTRL_TIDFLOW_DIS)
4537 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable);
4538 if (op & QIB_RCVCTRL_TAILUPD_ENB)
4539 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd);
4540 if (op & QIB_RCVCTRL_TAILUPD_DIS)
4541 dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd);
4542 if (op & QIB_RCVCTRL_PKEY_ENB)
4543 ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable);
4544 if (op & QIB_RCVCTRL_PKEY_DIS)
4545 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable);
4546 if (ctxt < 0) {
4547 mask = (1ULL << dd->ctxtcnt) - 1;
4548 rcd = NULL;
4549 } else {
4550 mask = (1ULL << ctxt);
4551 rcd = dd->rcd[ctxt];
4552 }
4553 if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) {
4554 ppd->p_rcvctrl |=
4555 (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel));
4556 if (!(dd->flags & QIB_NODMA_RTAIL)) {
4557 op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */
4558 dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd);
4559 }
4560 /* Write these registers before the context is enabled. */
4561 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt,
4562 rcd->rcvhdrqtailaddr_phys);
4563 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt,
4564 rcd->rcvhdrq_phys);
4565 rcd->seq_cnt = 1;
4566 }
4567 if (op & QIB_RCVCTRL_CTXT_DIS)
4568 ppd->p_rcvctrl &=
4569 ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel));
4570 if (op & QIB_RCVCTRL_BP_ENB)
4571 dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull);
4572 if (op & QIB_RCVCTRL_BP_DIS)
4573 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull));
4574 if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
4575 dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail));
4576 if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
4577 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail));
4578 /*
4579 * Decide which registers to write depending on the ops enabled.
4580 * Special case is "flush" (no bits set at all)
4581 * which needs to write both.
4582 */
4583 if (op == 0 || (op & RCVCTRL_COMMON_MODS))
4584 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
4585 if (op == 0 || (op & RCVCTRL_PORT_MODS))
4586 qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
4587 if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) {
4588 /*
4589 * Init the context registers also; if we were
4590 * disabled, tail and head should both be zero
4591 * already from the enable, but since we don't
4592 * know, we have to do it explicitly.
4593 */
4594 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
4595 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
4596
4597 /* be sure enabling write seen; hd/tl should be 0 */
4598 (void) qib_read_kreg32(dd, kr_scratch);
4599 val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
4600 dd->rcd[ctxt]->head = val;
4601 /* If kctxt, interrupt on next receive. */
4602 if (ctxt < dd->first_user_ctxt)
4603 val |= dd->rhdrhead_intr_off;
4604 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
4605 } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) &&
4606 dd->rcd[ctxt] && dd->rhdrhead_intr_off) {
4607 /* arm rcv interrupt */
4608 val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off;
4609 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
4610 }
4611 if (op & QIB_RCVCTRL_CTXT_DIS) {
4612 unsigned f;
4613
4614 /* Now that the context is disabled, clear these registers. */
4615 if (ctxt >= 0) {
4616 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0);
4617 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0);
4618 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++)
4619 qib_write_ureg(dd, ur_rcvflowtable + f,
4620 TIDFLOW_ERRBITS, ctxt);
4621 } else {
4622 unsigned i;
4623
4624 for (i = 0; i < dd->cfgctxts; i++) {
4625 qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr,
4626 i, 0);
4627 qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0);
4628 for (f = 0; f < NUM_TIDFLOWS_CTXT; f++)
4629 qib_write_ureg(dd, ur_rcvflowtable + f,
4630 TIDFLOW_ERRBITS, i);
4631 }
4632 }
4633 }
4634 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
4635 }
4636
4637 /*
4638 * Modify the SENDCTRL register in chip-specific way. This
4639 * is a function where there are multiple such registers with
4640 * slightly different layouts.
4641 * The chip doesn't allow back-to-back sendctrl writes, so write
4642 * the scratch register after writing sendctrl.
4643 *
4644 * Which register is written depends on the operation.
4645 * Most operate on the common register, while
4646 * SEND_ENB and SEND_DIS operate on the per-port ones.
4647 * SEND_ENB is included in common because it can change SPCL_TRIG
4648 */
4649 #define SENDCTRL_COMMON_MODS (\
4650 QIB_SENDCTRL_CLEAR | \
4651 QIB_SENDCTRL_AVAIL_DIS | \
4652 QIB_SENDCTRL_AVAIL_ENB | \
4653 QIB_SENDCTRL_AVAIL_BLIP | \
4654 QIB_SENDCTRL_DISARM | \
4655 QIB_SENDCTRL_DISARM_ALL | \
4656 QIB_SENDCTRL_SEND_ENB)
4657
4658 #define SENDCTRL_PORT_MODS (\
4659 QIB_SENDCTRL_CLEAR | \
4660 QIB_SENDCTRL_SEND_ENB | \
4661 QIB_SENDCTRL_SEND_DIS | \
4662 QIB_SENDCTRL_FLUSH)
4663
4664 static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op)
4665 {
4666 struct qib_devdata *dd = ppd->dd;
4667 u64 tmp_dd_sendctrl;
4668 unsigned long flags;
4669
4670 spin_lock_irqsave(&dd->sendctrl_lock, flags);
4671
4672 /* First the dd ones that are "sticky", saved in shadow */
4673 if (op & QIB_SENDCTRL_CLEAR)
4674 dd->sendctrl = 0;
4675 if (op & QIB_SENDCTRL_AVAIL_DIS)
4676 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
4677 else if (op & QIB_SENDCTRL_AVAIL_ENB) {
4678 dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd);
4679 if (dd->flags & QIB_USE_SPCL_TRIG)
4680 dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn);
4681 }
4682
4683 /* Then the ppd ones that are "sticky", saved in shadow */
4684 if (op & QIB_SENDCTRL_SEND_DIS)
4685 ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable);
4686 else if (op & QIB_SENDCTRL_SEND_ENB)
4687 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable);
4688
4689 if (op & QIB_SENDCTRL_DISARM_ALL) {
4690 u32 i, last;
4691
4692 tmp_dd_sendctrl = dd->sendctrl;
4693 last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
4694 /*
4695 * Disarm any buffers that are not yet launched,
4696 * disabling updates until done.
4697 */
4698 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
4699 for (i = 0; i < last; i++) {
4700 qib_write_kreg(dd, kr_sendctrl,
4701 tmp_dd_sendctrl |
4702 SYM_MASK(SendCtrl, Disarm) | i);
4703 qib_write_kreg(dd, kr_scratch, 0);
4704 }
4705 }
4706
4707 if (op & QIB_SENDCTRL_FLUSH) {
4708 u64 tmp_ppd_sendctrl = ppd->p_sendctrl;
4709
4710 /*
4711 * Now drain all the fifos. The Abort bit should never be
4712 * needed, so for now, at least, we don't use it.
4713 */
4714 tmp_ppd_sendctrl |=
4715 SYM_MASK(SendCtrl_0, TxeDrainRmFifo) |
4716 SYM_MASK(SendCtrl_0, TxeDrainLaFifo) |
4717 SYM_MASK(SendCtrl_0, TxeBypassIbc);
4718 qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl);
4719 qib_write_kreg(dd, kr_scratch, 0);
4720 }
4721
4722 tmp_dd_sendctrl = dd->sendctrl;
4723
4724 if (op & QIB_SENDCTRL_DISARM)
4725 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
4726 ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) <<
4727 SYM_LSB(SendCtrl, DisarmSendBuf));
4728 if ((op & QIB_SENDCTRL_AVAIL_BLIP) &&
4729 (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
4730 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
4731
4732 if (op == 0 || (op & SENDCTRL_COMMON_MODS)) {
4733 qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
4734 qib_write_kreg(dd, kr_scratch, 0);
4735 }
4736
4737 if (op == 0 || (op & SENDCTRL_PORT_MODS)) {
4738 qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl);
4739 qib_write_kreg(dd, kr_scratch, 0);
4740 }
4741
4742 if (op & QIB_SENDCTRL_AVAIL_BLIP) {
4743 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
4744 qib_write_kreg(dd, kr_scratch, 0);
4745 }
4746
4747 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4748
4749 if (op & QIB_SENDCTRL_FLUSH) {
4750 u32 v;
4751 /*
4752 * ensure writes have hit chip, then do a few
4753 * more reads, to allow DMA of pioavail registers
4754 * to occur, so in-memory copy is in sync with
4755 * the chip. Not always safe to sleep.
4756 */
4757 v = qib_read_kreg32(dd, kr_scratch);
4758 qib_write_kreg(dd, kr_scratch, v);
4759 v = qib_read_kreg32(dd, kr_scratch);
4760 qib_write_kreg(dd, kr_scratch, v);
4761 qib_read_kreg32(dd, kr_scratch);
4762 }
4763 }
4764
4765 #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */
4766 #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */
4767 #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */
4768
4769 /**
4770 * qib_portcntr_7322 - read a per-port chip counter
4771 * @ppd: the qlogic_ib pport
4772 * @creg: the counter to read (not a chip offset)
4773 */
4774 static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg)
4775 {
4776 struct qib_devdata *dd = ppd->dd;
4777 u64 ret = 0ULL;
4778 u16 creg;
4779 /* 0xffff for unimplemented or synthesized counters */
4780 static const u32 xlator[] = {
4781 [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG,
4782 [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG,
4783 [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount,
4784 [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount,
4785 [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount,
4786 [QIBPORTCNTR_SENDSTALL] = crp_sendstall,
4787 [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG,
4788 [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount,
4789 [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount,
4790 [QIBPORTCNTR_RCVEBP] = crp_rcvebp,
4791 [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl,
4792 [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG,
4793 [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */
4794 [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr,
4795 [QIBPORTCNTR_RXVLERR] = crp_rxvlerr,
4796 [QIBPORTCNTR_ERRICRC] = crp_erricrc,
4797 [QIBPORTCNTR_ERRVCRC] = crp_errvcrc,
4798 [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc,
4799 [QIBPORTCNTR_BADFORMAT] = crp_badformat,
4800 [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen,
4801 [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr,
4802 [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen,
4803 [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl,
4804 [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl,
4805 [QIBPORTCNTR_ERRLINK] = crp_errlink,
4806 [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown,
4807 [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov,
4808 [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr,
4809 [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt,
4810 [QIBPORTCNTR_ERRPKEY] = crp_errpkey,
4811 /*
4812 * the next 3 aren't really counters, but were implemented
4813 * as counters in older chips, so still get accessed as
4814 * though they were counters from this code.
4815 */
4816 [QIBPORTCNTR_PSINTERVAL] = krp_psinterval,
4817 [QIBPORTCNTR_PSSTART] = krp_psstart,
4818 [QIBPORTCNTR_PSSTAT] = krp_psstat,
4819 /* pseudo-counter, summed for all ports */
4820 [QIBPORTCNTR_KHDROVFL] = 0xffff,
4821 };
4822
4823 if (reg >= ARRAY_SIZE(xlator)) {
4824 qib_devinfo(ppd->dd->pcidev,
4825 "Unimplemented portcounter %u\n", reg);
4826 goto done;
4827 }
4828 creg = xlator[reg] & _PORT_CNTR_IDXMASK;
4829
4830 /* handle non-counters and special cases first */
4831 if (reg == QIBPORTCNTR_KHDROVFL) {
4832 int i;
4833
4834 /* sum over all kernel contexts (skip if mini_init) */
4835 for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) {
4836 struct qib_ctxtdata *rcd = dd->rcd[i];
4837
4838 if (!rcd || rcd->ppd != ppd)
4839 continue;
4840 ret += read_7322_creg32(dd, cr_base_egrovfl + i);
4841 }
4842 goto done;
4843 } else if (reg == QIBPORTCNTR_RXDROPPKT) {
4844 /*
4845 * Used as part of the synthesis of port_rcv_errors
4846 * in the verbs code for IBTA counters. Not needed for 7322,
4847 * because all the errors are already counted by other cntrs.
4848 */
4849 goto done;
4850 } else if (reg == QIBPORTCNTR_PSINTERVAL ||
4851 reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) {
4852 /* were counters in older chips, now per-port kernel regs */
4853 ret = qib_read_kreg_port(ppd, creg);
4854 goto done;
4855 }
4856
4857 /*
4858 * Only fast increment counters are 64 bits; use 32 bit reads to
4859 * avoid two independent reads when on Opteron.
4860 */
4861 if (xlator[reg] & _PORT_64BIT_FLAG)
4862 ret = read_7322_creg_port(ppd, creg);
4863 else
4864 ret = read_7322_creg32_port(ppd, creg);
4865 if (creg == crp_ibsymbolerr) {
4866 if (ppd->cpspec->ibdeltainprog)
4867 ret -= ret - ppd->cpspec->ibsymsnap;
4868 ret -= ppd->cpspec->ibsymdelta;
4869 } else if (creg == crp_iblinkerrrecov) {
4870 if (ppd->cpspec->ibdeltainprog)
4871 ret -= ret - ppd->cpspec->iblnkerrsnap;
4872 ret -= ppd->cpspec->iblnkerrdelta;
4873 } else if (creg == crp_errlink)
4874 ret -= ppd->cpspec->ibmalfdelta;
4875 else if (creg == crp_iblinkdown)
4876 ret += ppd->cpspec->iblnkdowndelta;
4877 done:
4878 return ret;
4879 }
4880
4881 /*
4882 * Device counter names (not port-specific), one line per stat,
4883 * single string. Used by utilities like ipathstats to print the stats
4884 * in a way which works for different versions of drivers, without changing
4885 * the utility. Names need to be 12 chars or less (w/o newline), for proper
4886 * display by utility.
4887 * Non-error counters are first.
4888 * Start of "error" conters is indicated by a leading "E " on the first
4889 * "error" counter, and doesn't count in label length.
4890 * The EgrOvfl list needs to be last so we truncate them at the configured
4891 * context count for the device.
4892 * cntr7322indices contains the corresponding register indices.
4893 */
4894 static const char cntr7322names[] =
4895 "Interrupts\n"
4896 "HostBusStall\n"
4897 "E RxTIDFull\n"
4898 "RxTIDInvalid\n"
4899 "RxTIDFloDrop\n" /* 7322 only */
4900 "Ctxt0EgrOvfl\n"
4901 "Ctxt1EgrOvfl\n"
4902 "Ctxt2EgrOvfl\n"
4903 "Ctxt3EgrOvfl\n"
4904 "Ctxt4EgrOvfl\n"
4905 "Ctxt5EgrOvfl\n"
4906 "Ctxt6EgrOvfl\n"
4907 "Ctxt7EgrOvfl\n"
4908 "Ctxt8EgrOvfl\n"
4909 "Ctxt9EgrOvfl\n"
4910 "Ctx10EgrOvfl\n"
4911 "Ctx11EgrOvfl\n"
4912 "Ctx12EgrOvfl\n"
4913 "Ctx13EgrOvfl\n"
4914 "Ctx14EgrOvfl\n"
4915 "Ctx15EgrOvfl\n"
4916 "Ctx16EgrOvfl\n"
4917 "Ctx17EgrOvfl\n"
4918 ;
4919
4920 static const u32 cntr7322indices[] = {
4921 cr_lbint | _PORT_64BIT_FLAG,
4922 cr_lbstall | _PORT_64BIT_FLAG,
4923 cr_tidfull,
4924 cr_tidinvalid,
4925 cr_rxtidflowdrop,
4926 cr_base_egrovfl + 0,
4927 cr_base_egrovfl + 1,
4928 cr_base_egrovfl + 2,
4929 cr_base_egrovfl + 3,
4930 cr_base_egrovfl + 4,
4931 cr_base_egrovfl + 5,
4932 cr_base_egrovfl + 6,
4933 cr_base_egrovfl + 7,
4934 cr_base_egrovfl + 8,
4935 cr_base_egrovfl + 9,
4936 cr_base_egrovfl + 10,
4937 cr_base_egrovfl + 11,
4938 cr_base_egrovfl + 12,
4939 cr_base_egrovfl + 13,
4940 cr_base_egrovfl + 14,
4941 cr_base_egrovfl + 15,
4942 cr_base_egrovfl + 16,
4943 cr_base_egrovfl + 17,
4944 };
4945
4946 /*
4947 * same as cntr7322names and cntr7322indices, but for port-specific counters.
4948 * portcntr7322indices is somewhat complicated by some registers needing
4949 * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
4950 */
4951 static const char portcntr7322names[] =
4952 "TxPkt\n"
4953 "TxFlowPkt\n"
4954 "TxWords\n"
4955 "RxPkt\n"
4956 "RxFlowPkt\n"
4957 "RxWords\n"
4958 "TxFlowStall\n"
4959 "TxDmaDesc\n" /* 7220 and 7322-only */
4960 "E RxDlidFltr\n" /* 7220 and 7322-only */
4961 "IBStatusChng\n"
4962 "IBLinkDown\n"
4963 "IBLnkRecov\n"
4964 "IBRxLinkErr\n"
4965 "IBSymbolErr\n"
4966 "RxLLIErr\n"
4967 "RxBadFormat\n"
4968 "RxBadLen\n"
4969 "RxBufOvrfl\n"
4970 "RxEBP\n"
4971 "RxFlowCtlErr\n"
4972 "RxICRCerr\n"
4973 "RxLPCRCerr\n"
4974 "RxVCRCerr\n"
4975 "RxInvalLen\n"
4976 "RxInvalPKey\n"
4977 "RxPktDropped\n"
4978 "TxBadLength\n"
4979 "TxDropped\n"
4980 "TxInvalLen\n"
4981 "TxUnderrun\n"
4982 "TxUnsupVL\n"
4983 "RxLclPhyErr\n" /* 7220 and 7322-only from here down */
4984 "RxVL15Drop\n"
4985 "RxVlErr\n"
4986 "XcessBufOvfl\n"
4987 "RxQPBadCtxt\n" /* 7322-only from here down */
4988 "TXBadHeader\n"
4989 ;
4990
4991 static const u32 portcntr7322indices[] = {
4992 QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
4993 crp_pktsendflow,
4994 QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
4995 QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
4996 crp_pktrcvflowctrl,
4997 QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
4998 QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
4999 crp_txsdmadesc | _PORT_64BIT_FLAG,
5000 crp_rxdlidfltr,
5001 crp_ibstatuschange,
5002 QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
5003 QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
5004 QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
5005 QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
5006 QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
5007 QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
5008 QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
5009 QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
5010 QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
5011 crp_rcvflowctrlviol,
5012 QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
5013 QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
5014 QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
5015 QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
5016 QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
5017 QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
5018 crp_txminmaxlenerr,
5019 crp_txdroppedpkt,
5020 crp_txlenerr,
5021 crp_txunderrun,
5022 crp_txunsupvl,
5023 QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG,
5024 QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG,
5025 QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG,
5026 QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG,
5027 crp_rxqpinvalidctxt,
5028 crp_txhdrerr,
5029 };
5030
5031 /* do all the setup to make the counter reads efficient later */
5032 static void init_7322_cntrnames(struct qib_devdata *dd)
5033 {
5034 int i, j = 0;
5035 char *s;
5036
5037 for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts;
5038 i++) {
5039 /* we always have at least one counter before the egrovfl */
5040 if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
5041 j = 1;
5042 s = strchr(s + 1, '\n');
5043 if (s && j)
5044 j++;
5045 }
5046 dd->cspec->ncntrs = i;
5047 if (!s)
5048 /* full list; size is without terminating null */
5049 dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1;
5050 else
5051 dd->cspec->cntrnamelen = 1 + s - cntr7322names;
5052 dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs
5053 * sizeof(u64), GFP_KERNEL);
5054 if (!dd->cspec->cntrs)
5055 qib_dev_err(dd, "Failed allocation for counters\n");
5056
5057 for (i = 0, s = (char *)portcntr7322names; s; i++)
5058 s = strchr(s + 1, '\n');
5059 dd->cspec->nportcntrs = i - 1;
5060 dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1;
5061 for (i = 0; i < dd->num_pports; ++i) {
5062 dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs
5063 * sizeof(u64), GFP_KERNEL);
5064 if (!dd->pport[i].cpspec->portcntrs)
5065 qib_dev_err(dd,
5066 "Failed allocation for portcounters\n");
5067 }
5068 }
5069
5070 static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
5071 u64 **cntrp)
5072 {
5073 u32 ret;
5074
5075 if (namep) {
5076 ret = dd->cspec->cntrnamelen;
5077 if (pos >= ret)
5078 ret = 0; /* final read after getting everything */
5079 else
5080 *namep = (char *) cntr7322names;
5081 } else {
5082 u64 *cntr = dd->cspec->cntrs;
5083 int i;
5084
5085 ret = dd->cspec->ncntrs * sizeof(u64);
5086 if (!cntr || pos >= ret) {
5087 /* everything read, or couldn't get memory */
5088 ret = 0;
5089 goto done;
5090 }
5091 *cntrp = cntr;
5092 for (i = 0; i < dd->cspec->ncntrs; i++)
5093 if (cntr7322indices[i] & _PORT_64BIT_FLAG)
5094 *cntr++ = read_7322_creg(dd,
5095 cntr7322indices[i] &
5096 _PORT_CNTR_IDXMASK);
5097 else
5098 *cntr++ = read_7322_creg32(dd,
5099 cntr7322indices[i]);
5100 }
5101 done:
5102 return ret;
5103 }
5104
5105 static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
5106 char **namep, u64 **cntrp)
5107 {
5108 u32 ret;
5109
5110 if (namep) {
5111 ret = dd->cspec->portcntrnamelen;
5112 if (pos >= ret)
5113 ret = 0; /* final read after getting everything */
5114 else
5115 *namep = (char *)portcntr7322names;
5116 } else {
5117 struct qib_pportdata *ppd = &dd->pport[port];
5118 u64 *cntr = ppd->cpspec->portcntrs;
5119 int i;
5120
5121 ret = dd->cspec->nportcntrs * sizeof(u64);
5122 if (!cntr || pos >= ret) {
5123 /* everything read, or couldn't get memory */
5124 ret = 0;
5125 goto done;
5126 }
5127 *cntrp = cntr;
5128 for (i = 0; i < dd->cspec->nportcntrs; i++) {
5129 if (portcntr7322indices[i] & _PORT_VIRT_FLAG)
5130 *cntr++ = qib_portcntr_7322(ppd,
5131 portcntr7322indices[i] &
5132 _PORT_CNTR_IDXMASK);
5133 else if (portcntr7322indices[i] & _PORT_64BIT_FLAG)
5134 *cntr++ = read_7322_creg_port(ppd,
5135 portcntr7322indices[i] &
5136 _PORT_CNTR_IDXMASK);
5137 else
5138 *cntr++ = read_7322_creg32_port(ppd,
5139 portcntr7322indices[i]);
5140 }
5141 }
5142 done:
5143 return ret;
5144 }
5145
5146 /**
5147 * qib_get_7322_faststats - get word counters from chip before they overflow
5148 * @opaque - contains a pointer to the qlogic_ib device qib_devdata
5149 *
5150 * VESTIGIAL IBA7322 has no "small fast counters", so the only
5151 * real purpose of this function is to maintain the notion of
5152 * "active time", which in turn is only logged into the eeprom,
5153 * which we don;t have, yet, for 7322-based boards.
5154 *
5155 * called from add_timer
5156 */
5157 static void qib_get_7322_faststats(unsigned long opaque)
5158 {
5159 struct qib_devdata *dd = (struct qib_devdata *) opaque;
5160 struct qib_pportdata *ppd;
5161 unsigned long flags;
5162 u64 traffic_wds;
5163 int pidx;
5164
5165 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
5166 ppd = dd->pport + pidx;
5167
5168 /*
5169 * If port isn't enabled or not operational ports, or
5170 * diags is running (can cause memory diags to fail)
5171 * skip this port this time.
5172 */
5173 if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED)
5174 || dd->diag_client)
5175 continue;
5176
5177 /*
5178 * Maintain an activity timer, based on traffic
5179 * exceeding a threshold, so we need to check the word-counts
5180 * even if they are 64-bit.
5181 */
5182 traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) +
5183 qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND);
5184 spin_lock_irqsave(&ppd->dd->eep_st_lock, flags);
5185 traffic_wds -= ppd->dd->traffic_wds;
5186 ppd->dd->traffic_wds += traffic_wds;
5187 if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
5188 atomic_add(ACTIVITY_TIMER, &ppd->dd->active_time);
5189 spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags);
5190 if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active &
5191 QIB_IB_QDR) &&
5192 (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
5193 QIBL_LINKACTIVE)) &&
5194 ppd->cpspec->qdr_dfe_time &&
5195 time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) {
5196 ppd->cpspec->qdr_dfe_on = 0;
5197
5198 qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
5199 ppd->dd->cspec->r1 ?
5200 QDR_STATIC_ADAPT_INIT_R1 :
5201 QDR_STATIC_ADAPT_INIT);
5202 force_h1(ppd);
5203 }
5204 }
5205 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
5206 }
5207
5208 /*
5209 * If we were using MSIx, try to fallback to INTx.
5210 */
5211 static int qib_7322_intr_fallback(struct qib_devdata *dd)
5212 {
5213 if (!dd->cspec->num_msix_entries)
5214 return 0; /* already using INTx */
5215
5216 qib_devinfo(dd->pcidev,
5217 "MSIx interrupt not detected, trying INTx interrupts\n");
5218 qib_7322_nomsix(dd);
5219 qib_enable_intx(dd->pcidev);
5220 qib_setup_7322_interrupt(dd, 0);
5221 return 1;
5222 }
5223
5224 /*
5225 * Reset the XGXS (between serdes and IBC). Slightly less intrusive
5226 * than resetting the IBC or external link state, and useful in some
5227 * cases to cause some retraining. To do this right, we reset IBC
5228 * as well, then return to previous state (which may be still in reset)
5229 * NOTE: some callers of this "know" this writes the current value
5230 * of cpspec->ibcctrl_a as part of it's operation, so if that changes,
5231 * check all callers.
5232 */
5233 static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd)
5234 {
5235 u64 val;
5236 struct qib_devdata *dd = ppd->dd;
5237 const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) |
5238 SYM_MASK(IBPCSConfig_0, xcv_treset) |
5239 SYM_MASK(IBPCSConfig_0, tx_rx_reset);
5240
5241 val = qib_read_kreg_port(ppd, krp_ib_pcsconfig);
5242 qib_write_kreg(dd, kr_hwerrmask,
5243 dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop));
5244 qib_write_kreg_port(ppd, krp_ibcctrl_a,
5245 ppd->cpspec->ibcctrl_a &
5246 ~SYM_MASK(IBCCtrlA_0, IBLinkEn));
5247
5248 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits);
5249 qib_read_kreg32(dd, kr_scratch);
5250 qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits);
5251 qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
5252 qib_write_kreg(dd, kr_scratch, 0ULL);
5253 qib_write_kreg(dd, kr_hwerrclear,
5254 SYM_MASK(HwErrClear, statusValidNoEopClear));
5255 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
5256 }
5257
5258 /*
5259 * This code for non-IBTA-compliant IB speed negotiation is only known to
5260 * work for the SDR to DDR transition, and only between an HCA and a switch
5261 * with recent firmware. It is based on observed heuristics, rather than
5262 * actual knowledge of the non-compliant speed negotiation.
5263 * It has a number of hard-coded fields, since the hope is to rewrite this
5264 * when a spec is available on how the negoation is intended to work.
5265 */
5266 static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr,
5267 u32 dcnt, u32 *data)
5268 {
5269 int i;
5270 u64 pbc;
5271 u32 __iomem *piobuf;
5272 u32 pnum, control, len;
5273 struct qib_devdata *dd = ppd->dd;
5274
5275 i = 0;
5276 len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
5277 control = qib_7322_setpbc_control(ppd, len, 0, 15);
5278 pbc = ((u64) control << 32) | len;
5279 while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) {
5280 if (i++ > 15)
5281 return;
5282 udelay(2);
5283 }
5284 /* disable header check on this packet, since it can't be valid */
5285 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL);
5286 writeq(pbc, piobuf);
5287 qib_flush_wc();
5288 qib_pio_copy(piobuf + 2, hdr, 7);
5289 qib_pio_copy(piobuf + 9, data, dcnt);
5290 if (dd->flags & QIB_USE_SPCL_TRIG) {
5291 u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023;
5292
5293 qib_flush_wc();
5294 __raw_writel(0xaebecede, piobuf + spcl_off);
5295 }
5296 qib_flush_wc();
5297 qib_sendbuf_done(dd, pnum);
5298 /* and re-enable hdr check */
5299 dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL);
5300 }
5301
5302 /*
5303 * _start packet gets sent twice at start, _done gets sent twice at end
5304 */
5305 static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which)
5306 {
5307 struct qib_devdata *dd = ppd->dd;
5308 static u32 swapped;
5309 u32 dw, i, hcnt, dcnt, *data;
5310 static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
5311 static u32 madpayload_start[0x40] = {
5312 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
5313 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
5314 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
5315 };
5316 static u32 madpayload_done[0x40] = {
5317 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
5318 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
5319 0x40000001, 0x1388, 0x15e, /* rest 0's */
5320 };
5321
5322 dcnt = ARRAY_SIZE(madpayload_start);
5323 hcnt = ARRAY_SIZE(hdr);
5324 if (!swapped) {
5325 /* for maintainability, do it at runtime */
5326 for (i = 0; i < hcnt; i++) {
5327 dw = (__force u32) cpu_to_be32(hdr[i]);
5328 hdr[i] = dw;
5329 }
5330 for (i = 0; i < dcnt; i++) {
5331 dw = (__force u32) cpu_to_be32(madpayload_start[i]);
5332 madpayload_start[i] = dw;
5333 dw = (__force u32) cpu_to_be32(madpayload_done[i]);
5334 madpayload_done[i] = dw;
5335 }
5336 swapped = 1;
5337 }
5338
5339 data = which ? madpayload_done : madpayload_start;
5340
5341 autoneg_7322_sendpkt(ppd, hdr, dcnt, data);
5342 qib_read_kreg64(dd, kr_scratch);
5343 udelay(2);
5344 autoneg_7322_sendpkt(ppd, hdr, dcnt, data);
5345 qib_read_kreg64(dd, kr_scratch);
5346 udelay(2);
5347 }
5348
5349 /*
5350 * Do the absolute minimum to cause an IB speed change, and make it
5351 * ready, but don't actually trigger the change. The caller will
5352 * do that when ready (if link is in Polling training state, it will
5353 * happen immediately, otherwise when link next goes down)
5354 *
5355 * This routine should only be used as part of the DDR autonegotation
5356 * code for devices that are not compliant with IB 1.2 (or code that
5357 * fixes things up for same).
5358 *
5359 * When link has gone down, and autoneg enabled, or autoneg has
5360 * failed and we give up until next time we set both speeds, and
5361 * then we want IBTA enabled as well as "use max enabled speed.
5362 */
5363 static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed)
5364 {
5365 u64 newctrlb;
5366 newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK |
5367 IBA7322_IBC_IBTA_1_2_MASK |
5368 IBA7322_IBC_MAX_SPEED_MASK);
5369
5370 if (speed & (speed - 1)) /* multiple speeds */
5371 newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) |
5372 IBA7322_IBC_IBTA_1_2_MASK |
5373 IBA7322_IBC_MAX_SPEED_MASK;
5374 else
5375 newctrlb |= speed == QIB_IB_QDR ?
5376 IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK :
5377 ((speed == QIB_IB_DDR ?
5378 IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR));
5379
5380 if (newctrlb == ppd->cpspec->ibcctrl_b)
5381 return;
5382
5383 ppd->cpspec->ibcctrl_b = newctrlb;
5384 qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b);
5385 qib_write_kreg(ppd->dd, kr_scratch, 0);
5386 }
5387
5388 /*
5389 * This routine is only used when we are not talking to another
5390 * IB 1.2-compliant device that we think can do DDR.
5391 * (This includes all existing switch chips as of Oct 2007.)
5392 * 1.2-compliant devices go directly to DDR prior to reaching INIT
5393 */
5394 static void try_7322_autoneg(struct qib_pportdata *ppd)
5395 {
5396 unsigned long flags;
5397
5398 spin_lock_irqsave(&ppd->lflags_lock, flags);
5399 ppd->lflags |= QIBL_IB_AUTONEG_INPROG;
5400 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5401 qib_autoneg_7322_send(ppd, 0);
5402 set_7322_ibspeed_fast(ppd, QIB_IB_DDR);
5403 qib_7322_mini_pcs_reset(ppd);
5404 /* 2 msec is minimum length of a poll cycle */
5405 queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work,
5406 msecs_to_jiffies(2));
5407 }
5408
5409 /*
5410 * Handle the empirically determined mechanism for auto-negotiation
5411 * of DDR speed with switches.
5412 */
5413 static void autoneg_7322_work(struct work_struct *work)
5414 {
5415 struct qib_pportdata *ppd;
5416 struct qib_devdata *dd;
5417 u64 startms;
5418 u32 i;
5419 unsigned long flags;
5420
5421 ppd = container_of(work, struct qib_chippport_specific,
5422 autoneg_work.work)->ppd;
5423 dd = ppd->dd;
5424
5425 startms = jiffies_to_msecs(jiffies);
5426
5427 /*
5428 * Busy wait for this first part, it should be at most a
5429 * few hundred usec, since we scheduled ourselves for 2msec.
5430 */
5431 for (i = 0; i < 25; i++) {
5432 if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState)
5433 == IB_7322_LT_STATE_POLLQUIET) {
5434 qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE);
5435 break;
5436 }
5437 udelay(100);
5438 }
5439
5440 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
5441 goto done; /* we got there early or told to stop */
5442
5443 /* we expect this to timeout */
5444 if (wait_event_timeout(ppd->cpspec->autoneg_wait,
5445 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
5446 msecs_to_jiffies(90)))
5447 goto done;
5448 qib_7322_mini_pcs_reset(ppd);
5449
5450 /* we expect this to timeout */
5451 if (wait_event_timeout(ppd->cpspec->autoneg_wait,
5452 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
5453 msecs_to_jiffies(1700)))
5454 goto done;
5455 qib_7322_mini_pcs_reset(ppd);
5456
5457 set_7322_ibspeed_fast(ppd, QIB_IB_SDR);
5458
5459 /*
5460 * Wait up to 250 msec for link to train and get to INIT at DDR;
5461 * this should terminate early.
5462 */
5463 wait_event_timeout(ppd->cpspec->autoneg_wait,
5464 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
5465 msecs_to_jiffies(250));
5466 done:
5467 if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) {
5468 spin_lock_irqsave(&ppd->lflags_lock, flags);
5469 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
5470 if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) {
5471 ppd->lflags |= QIBL_IB_AUTONEG_FAILED;
5472 ppd->cpspec->autoneg_tries = 0;
5473 }
5474 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5475 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
5476 }
5477 }
5478
5479 /*
5480 * This routine is used to request IPG set in the QLogic switch.
5481 * Only called if r1.
5482 */
5483 static void try_7322_ipg(struct qib_pportdata *ppd)
5484 {
5485 struct qib_ibport *ibp = &ppd->ibport_data;
5486 struct ib_mad_send_buf *send_buf;
5487 struct ib_mad_agent *agent;
5488 struct ib_smp *smp;
5489 unsigned delay;
5490 int ret;
5491
5492 agent = ibp->send_agent;
5493 if (!agent)
5494 goto retry;
5495
5496 send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR,
5497 IB_MGMT_MAD_DATA, GFP_ATOMIC);
5498 if (IS_ERR(send_buf))
5499 goto retry;
5500
5501 if (!ibp->smi_ah) {
5502 struct ib_ah *ah;
5503
5504 ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE));
5505 if (IS_ERR(ah))
5506 ret = PTR_ERR(ah);
5507 else {
5508 send_buf->ah = ah;
5509 ibp->smi_ah = to_iah(ah);
5510 ret = 0;
5511 }
5512 } else {
5513 send_buf->ah = &ibp->smi_ah->ibah;
5514 ret = 0;
5515 }
5516
5517 smp = send_buf->mad;
5518 smp->base_version = IB_MGMT_BASE_VERSION;
5519 smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE;
5520 smp->class_version = 1;
5521 smp->method = IB_MGMT_METHOD_SEND;
5522 smp->hop_cnt = 1;
5523 smp->attr_id = QIB_VENDOR_IPG;
5524 smp->attr_mod = 0;
5525
5526 if (!ret)
5527 ret = ib_post_send_mad(send_buf, NULL);
5528 if (ret)
5529 ib_free_send_mad(send_buf);
5530 retry:
5531 delay = 2 << ppd->cpspec->ipg_tries;
5532 queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work,
5533 msecs_to_jiffies(delay));
5534 }
5535
5536 /*
5537 * Timeout handler for setting IPG.
5538 * Only called if r1.
5539 */
5540 static void ipg_7322_work(struct work_struct *work)
5541 {
5542 struct qib_pportdata *ppd;
5543
5544 ppd = container_of(work, struct qib_chippport_specific,
5545 ipg_work.work)->ppd;
5546 if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE))
5547 && ++ppd->cpspec->ipg_tries <= 10)
5548 try_7322_ipg(ppd);
5549 }
5550
5551 static u32 qib_7322_iblink_state(u64 ibcs)
5552 {
5553 u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState);
5554
5555 switch (state) {
5556 case IB_7322_L_STATE_INIT:
5557 state = IB_PORT_INIT;
5558 break;
5559 case IB_7322_L_STATE_ARM:
5560 state = IB_PORT_ARMED;
5561 break;
5562 case IB_7322_L_STATE_ACTIVE:
5563 /* fall through */
5564 case IB_7322_L_STATE_ACT_DEFER:
5565 state = IB_PORT_ACTIVE;
5566 break;
5567 default: /* fall through */
5568 case IB_7322_L_STATE_DOWN:
5569 state = IB_PORT_DOWN;
5570 break;
5571 }
5572 return state;
5573 }
5574
5575 /* returns the IBTA port state, rather than the IBC link training state */
5576 static u8 qib_7322_phys_portstate(u64 ibcs)
5577 {
5578 u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState);
5579 return qib_7322_physportstate[state];
5580 }
5581
5582 static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
5583 {
5584 int ret = 0, symadj = 0;
5585 unsigned long flags;
5586 int mult;
5587
5588 spin_lock_irqsave(&ppd->lflags_lock, flags);
5589 ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
5590 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5591
5592 /* Update our picture of width and speed from chip */
5593 if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) {
5594 ppd->link_speed_active = QIB_IB_QDR;
5595 mult = 4;
5596 } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) {
5597 ppd->link_speed_active = QIB_IB_DDR;
5598 mult = 2;
5599 } else {
5600 ppd->link_speed_active = QIB_IB_SDR;
5601 mult = 1;
5602 }
5603 if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) {
5604 ppd->link_width_active = IB_WIDTH_4X;
5605 mult *= 4;
5606 } else
5607 ppd->link_width_active = IB_WIDTH_1X;
5608 ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)];
5609
5610 if (!ibup) {
5611 u64 clr;
5612
5613 /* Link went down. */
5614 /* do IPG MAD again after linkdown, even if last time failed */
5615 ppd->cpspec->ipg_tries = 0;
5616 clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) &
5617 (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) |
5618 SYM_MASK(IBCStatusB_0, heartbeat_crosstalk));
5619 if (clr)
5620 qib_write_kreg_port(ppd, krp_ibcstatus_b, clr);
5621 if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
5622 QIBL_IB_AUTONEG_INPROG)))
5623 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
5624 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
5625 struct qib_qsfp_data *qd =
5626 &ppd->cpspec->qsfp_data;
5627 /* unlock the Tx settings, speed may change */
5628 qib_write_kreg_port(ppd, krp_tx_deemph_override,
5629 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
5630 reset_tx_deemphasis_override));
5631 qib_cancel_sends(ppd);
5632 /* on link down, ensure sane pcs state */
5633 qib_7322_mini_pcs_reset(ppd);
5634 /* schedule the qsfp refresh which should turn the link
5635 off */
5636 if (ppd->dd->flags & QIB_HAS_QSFP) {
5637 qd->t_insert = jiffies;
5638 queue_work(ib_wq, &qd->work);
5639 }
5640 spin_lock_irqsave(&ppd->sdma_lock, flags);
5641 if (__qib_sdma_running(ppd))
5642 __qib_sdma_process_event(ppd,
5643 qib_sdma_event_e70_go_idle);
5644 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
5645 }
5646 clr = read_7322_creg32_port(ppd, crp_iblinkdown);
5647 if (clr == ppd->cpspec->iblnkdownsnap)
5648 ppd->cpspec->iblnkdowndelta++;
5649 } else {
5650 if (qib_compat_ddr_negotiate &&
5651 !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
5652 QIBL_IB_AUTONEG_INPROG)) &&
5653 ppd->link_speed_active == QIB_IB_SDR &&
5654 (ppd->link_speed_enabled & QIB_IB_DDR)
5655 && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) {
5656 /* we are SDR, and auto-negotiation enabled */
5657 ++ppd->cpspec->autoneg_tries;
5658 if (!ppd->cpspec->ibdeltainprog) {
5659 ppd->cpspec->ibdeltainprog = 1;
5660 ppd->cpspec->ibsymdelta +=
5661 read_7322_creg32_port(ppd,
5662 crp_ibsymbolerr) -
5663 ppd->cpspec->ibsymsnap;
5664 ppd->cpspec->iblnkerrdelta +=
5665 read_7322_creg32_port(ppd,
5666 crp_iblinkerrrecov) -
5667 ppd->cpspec->iblnkerrsnap;
5668 }
5669 try_7322_autoneg(ppd);
5670 ret = 1; /* no other IB status change processing */
5671 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
5672 ppd->link_speed_active == QIB_IB_SDR) {
5673 qib_autoneg_7322_send(ppd, 1);
5674 set_7322_ibspeed_fast(ppd, QIB_IB_DDR);
5675 qib_7322_mini_pcs_reset(ppd);
5676 udelay(2);
5677 ret = 1; /* no other IB status change processing */
5678 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
5679 (ppd->link_speed_active & QIB_IB_DDR)) {
5680 spin_lock_irqsave(&ppd->lflags_lock, flags);
5681 ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG |
5682 QIBL_IB_AUTONEG_FAILED);
5683 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5684 ppd->cpspec->autoneg_tries = 0;
5685 /* re-enable SDR, for next link down */
5686 set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
5687 wake_up(&ppd->cpspec->autoneg_wait);
5688 symadj = 1;
5689 } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) {
5690 /*
5691 * Clear autoneg failure flag, and do setup
5692 * so we'll try next time link goes down and
5693 * back to INIT (possibly connected to a
5694 * different device).
5695 */
5696 spin_lock_irqsave(&ppd->lflags_lock, flags);
5697 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
5698 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
5699 ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK;
5700 symadj = 1;
5701 }
5702 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
5703 symadj = 1;
5704 if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10)
5705 try_7322_ipg(ppd);
5706 if (!ppd->cpspec->recovery_init)
5707 setup_7322_link_recovery(ppd, 0);
5708 ppd->cpspec->qdr_dfe_time = jiffies +
5709 msecs_to_jiffies(QDR_DFE_DISABLE_DELAY);
5710 }
5711 ppd->cpspec->ibmalfusesnap = 0;
5712 ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd,
5713 crp_errlink);
5714 }
5715 if (symadj) {
5716 ppd->cpspec->iblnkdownsnap =
5717 read_7322_creg32_port(ppd, crp_iblinkdown);
5718 if (ppd->cpspec->ibdeltainprog) {
5719 ppd->cpspec->ibdeltainprog = 0;
5720 ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd,
5721 crp_ibsymbolerr) - ppd->cpspec->ibsymsnap;
5722 ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd,
5723 crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap;
5724 }
5725 } else if (!ibup && qib_compat_ddr_negotiate &&
5726 !ppd->cpspec->ibdeltainprog &&
5727 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
5728 ppd->cpspec->ibdeltainprog = 1;
5729 ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
5730 crp_ibsymbolerr);
5731 ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd,
5732 crp_iblinkerrrecov);
5733 }
5734
5735 if (!ret)
5736 qib_setup_7322_setextled(ppd, ibup);
5737 return ret;
5738 }
5739
5740 /*
5741 * Does read/modify/write to appropriate registers to
5742 * set output and direction bits selected by mask.
5743 * these are in their canonical postions (e.g. lsb of
5744 * dir will end up in D48 of extctrl on existing chips).
5745 * returns contents of GP Inputs.
5746 */
5747 static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
5748 {
5749 u64 read_val, new_out;
5750 unsigned long flags;
5751
5752 if (mask) {
5753 /* some bits being written, lock access to GPIO */
5754 dir &= mask;
5755 out &= mask;
5756 spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
5757 dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
5758 dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
5759 new_out = (dd->cspec->gpio_out & ~mask) | out;
5760
5761 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
5762 qib_write_kreg(dd, kr_gpio_out, new_out);
5763 dd->cspec->gpio_out = new_out;
5764 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
5765 }
5766 /*
5767 * It is unlikely that a read at this time would get valid
5768 * data on a pin whose direction line was set in the same
5769 * call to this function. We include the read here because
5770 * that allows us to potentially combine a change on one pin with
5771 * a read on another, and because the old code did something like
5772 * this.
5773 */
5774 read_val = qib_read_kreg64(dd, kr_extstatus);
5775 return SYM_FIELD(read_val, EXTStatus, GPIOIn);
5776 }
5777
5778 /* Enable writes to config EEPROM, if possible. Returns previous state */
5779 static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen)
5780 {
5781 int prev_wen;
5782 u32 mask;
5783
5784 mask = 1 << QIB_EEPROM_WEN_NUM;
5785 prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM;
5786 gpio_7322_mod(dd, wen ? 0 : mask, mask, mask);
5787
5788 return prev_wen & 1;
5789 }
5790
5791 /*
5792 * Read fundamental info we need to use the chip. These are
5793 * the registers that describe chip capabilities, and are
5794 * saved in shadow registers.
5795 */
5796 static void get_7322_chip_params(struct qib_devdata *dd)
5797 {
5798 u64 val;
5799 u32 piobufs;
5800 int mtu;
5801
5802 dd->palign = qib_read_kreg32(dd, kr_pagealign);
5803
5804 dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
5805
5806 dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
5807 dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
5808 dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
5809 dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
5810 dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
5811
5812 val = qib_read_kreg64(dd, kr_sendpiobufcnt);
5813 dd->piobcnt2k = val & ~0U;
5814 dd->piobcnt4k = val >> 32;
5815 val = qib_read_kreg64(dd, kr_sendpiosize);
5816 dd->piosize2k = val & ~0U;
5817 dd->piosize4k = val >> 32;
5818
5819 mtu = ib_mtu_enum_to_int(qib_ibmtu);
5820 if (mtu == -1)
5821 mtu = QIB_DEFAULT_MTU;
5822 dd->pport[0].ibmtu = (u32)mtu;
5823 dd->pport[1].ibmtu = (u32)mtu;
5824
5825 /* these may be adjusted in init_chip_wc_pat() */
5826 dd->pio2kbase = (u32 __iomem *)
5827 ((char __iomem *) dd->kregbase + dd->pio2k_bufbase);
5828 dd->pio4kbase = (u32 __iomem *)
5829 ((char __iomem *) dd->kregbase +
5830 (dd->piobufbase >> 32));
5831 /*
5832 * 4K buffers take 2 pages; we use roundup just to be
5833 * paranoid; we calculate it once here, rather than on
5834 * ever buf allocate
5835 */
5836 dd->align4k = ALIGN(dd->piosize4k, dd->palign);
5837
5838 piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS;
5839
5840 dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
5841 (sizeof(u64) * BITS_PER_BYTE / 2);
5842 }
5843
5844 /*
5845 * The chip base addresses in cspec and cpspec have to be set
5846 * after possible init_chip_wc_pat(), rather than in
5847 * get_7322_chip_params(), so split out as separate function
5848 */
5849 static void qib_7322_set_baseaddrs(struct qib_devdata *dd)
5850 {
5851 u32 cregbase;
5852 cregbase = qib_read_kreg32(dd, kr_counterregbase);
5853
5854 dd->cspec->cregbase = (u64 __iomem *)(cregbase +
5855 (char __iomem *)dd->kregbase);
5856
5857 dd->egrtidbase = (u64 __iomem *)
5858 ((char __iomem *) dd->kregbase + dd->rcvegrbase);
5859
5860 /* port registers are defined as relative to base of chip */
5861 dd->pport[0].cpspec->kpregbase =
5862 (u64 __iomem *)((char __iomem *)dd->kregbase);
5863 dd->pport[1].cpspec->kpregbase =
5864 (u64 __iomem *)(dd->palign +
5865 (char __iomem *)dd->kregbase);
5866 dd->pport[0].cpspec->cpregbase =
5867 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0],
5868 kr_counterregbase) + (char __iomem *)dd->kregbase);
5869 dd->pport[1].cpspec->cpregbase =
5870 (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1],
5871 kr_counterregbase) + (char __iomem *)dd->kregbase);
5872 }
5873
5874 /*
5875 * This is a fairly special-purpose observer, so we only support
5876 * the port-specific parts of SendCtrl
5877 */
5878
5879 #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \
5880 SYM_MASK(SendCtrl_0, SDmaEnable) | \
5881 SYM_MASK(SendCtrl_0, SDmaIntEnable) | \
5882 SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \
5883 SYM_MASK(SendCtrl_0, SDmaHalt) | \
5884 SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \
5885 SYM_MASK(SendCtrl_0, ForceCreditUpToDate))
5886
5887 static int sendctrl_hook(struct qib_devdata *dd,
5888 const struct diag_observer *op, u32 offs,
5889 u64 *data, u64 mask, int only_32)
5890 {
5891 unsigned long flags;
5892 unsigned idx;
5893 unsigned pidx;
5894 struct qib_pportdata *ppd = NULL;
5895 u64 local_data, all_bits;
5896
5897 /*
5898 * The fixed correspondence between Physical ports and pports is
5899 * severed. We need to hunt for the ppd that corresponds
5900 * to the offset we got. And we have to do that without admitting
5901 * we know the stride, apparently.
5902 */
5903 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
5904 u64 __iomem *psptr;
5905 u32 psoffs;
5906
5907 ppd = dd->pport + pidx;
5908 if (!ppd->cpspec->kpregbase)
5909 continue;
5910
5911 psptr = ppd->cpspec->kpregbase + krp_sendctrl;
5912 psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr);
5913 if (psoffs == offs)
5914 break;
5915 }
5916
5917 /* If pport is not being managed by driver, just avoid shadows. */
5918 if (pidx >= dd->num_pports)
5919 ppd = NULL;
5920
5921 /* In any case, "idx" is flat index in kreg space */
5922 idx = offs / sizeof(u64);
5923
5924 all_bits = ~0ULL;
5925 if (only_32)
5926 all_bits >>= 32;
5927
5928 spin_lock_irqsave(&dd->sendctrl_lock, flags);
5929 if (!ppd || (mask & all_bits) != all_bits) {
5930 /*
5931 * At least some mask bits are zero, so we need
5932 * to read. The judgement call is whether from
5933 * reg or shadow. First-cut: read reg, and complain
5934 * if any bits which should be shadowed are different
5935 * from their shadowed value.
5936 */
5937 if (only_32)
5938 local_data = (u64)qib_read_kreg32(dd, idx);
5939 else
5940 local_data = qib_read_kreg64(dd, idx);
5941 *data = (local_data & ~mask) | (*data & mask);
5942 }
5943 if (mask) {
5944 /*
5945 * At least some mask bits are one, so we need
5946 * to write, but only shadow some bits.
5947 */
5948 u64 sval, tval; /* Shadowed, transient */
5949
5950 /*
5951 * New shadow val is bits we don't want to touch,
5952 * ORed with bits we do, that are intended for shadow.
5953 */
5954 if (ppd) {
5955 sval = ppd->p_sendctrl & ~mask;
5956 sval |= *data & SENDCTRL_SHADOWED & mask;
5957 ppd->p_sendctrl = sval;
5958 } else
5959 sval = *data & SENDCTRL_SHADOWED & mask;
5960 tval = sval | (*data & ~SENDCTRL_SHADOWED & mask);
5961 qib_write_kreg(dd, idx, tval);
5962 qib_write_kreg(dd, kr_scratch, 0Ull);
5963 }
5964 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
5965 return only_32 ? 4 : 8;
5966 }
5967
5968 static const struct diag_observer sendctrl_0_observer = {
5969 sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64),
5970 KREG_IDX(SendCtrl_0) * sizeof(u64)
5971 };
5972
5973 static const struct diag_observer sendctrl_1_observer = {
5974 sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64),
5975 KREG_IDX(SendCtrl_1) * sizeof(u64)
5976 };
5977
5978 static ushort sdma_fetch_prio = 8;
5979 module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO);
5980 MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority");
5981
5982 /* Besides logging QSFP events, we set appropriate TxDDS values */
5983 static void init_txdds_table(struct qib_pportdata *ppd, int override);
5984
5985 static void qsfp_7322_event(struct work_struct *work)
5986 {
5987 struct qib_qsfp_data *qd;
5988 struct qib_pportdata *ppd;
5989 unsigned long pwrup;
5990 unsigned long flags;
5991 int ret;
5992 u32 le2;
5993
5994 qd = container_of(work, struct qib_qsfp_data, work);
5995 ppd = qd->ppd;
5996 pwrup = qd->t_insert +
5997 msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC);
5998
5999 /* Delay for 20 msecs to allow ModPrs resistor to setup */
6000 mdelay(QSFP_MODPRS_LAG_MSEC);
6001
6002 if (!qib_qsfp_mod_present(ppd)) {
6003 ppd->cpspec->qsfp_data.modpresent = 0;
6004 /* Set the physical link to disabled */
6005 qib_set_ib_7322_lstate(ppd, 0,
6006 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
6007 spin_lock_irqsave(&ppd->lflags_lock, flags);
6008 ppd->lflags &= ~QIBL_LINKV;
6009 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
6010 } else {
6011 /*
6012 * Some QSFP's not only do not respond until the full power-up
6013 * time, but may behave badly if we try. So hold off responding
6014 * to insertion.
6015 */
6016 while (1) {
6017 if (time_is_before_jiffies(pwrup))
6018 break;
6019 msleep(20);
6020 }
6021
6022 ret = qib_refresh_qsfp_cache(ppd, &qd->cache);
6023
6024 /*
6025 * Need to change LE2 back to defaults if we couldn't
6026 * read the cable type (to handle cable swaps), so do this
6027 * even on failure to read cable information. We don't
6028 * get here for QME, so IS_QME check not needed here.
6029 */
6030 if (!ret && !ppd->dd->cspec->r1) {
6031 if (QSFP_IS_ACTIVE_FAR(qd->cache.tech))
6032 le2 = LE2_QME;
6033 else if (qd->cache.atten[1] >= qib_long_atten &&
6034 QSFP_IS_CU(qd->cache.tech))
6035 le2 = LE2_5m;
6036 else
6037 le2 = LE2_DEFAULT;
6038 } else
6039 le2 = LE2_DEFAULT;
6040 ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7));
6041 /*
6042 * We always change parameteters, since we can choose
6043 * values for cables without eeproms, and the cable may have
6044 * changed from a cable with full or partial eeprom content
6045 * to one with partial or no content.
6046 */
6047 init_txdds_table(ppd, 0);
6048 /* The physical link is being re-enabled only when the
6049 * previous state was DISABLED and the VALID bit is not
6050 * set. This should only happen when the cable has been
6051 * physically pulled. */
6052 if (!ppd->cpspec->qsfp_data.modpresent &&
6053 (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) {
6054 ppd->cpspec->qsfp_data.modpresent = 1;
6055 qib_set_ib_7322_lstate(ppd, 0,
6056 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
6057 spin_lock_irqsave(&ppd->lflags_lock, flags);
6058 ppd->lflags |= QIBL_LINKV;
6059 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
6060 }
6061 }
6062 }
6063
6064 /*
6065 * There is little we can do but complain to the user if QSFP
6066 * initialization fails.
6067 */
6068 static void qib_init_7322_qsfp(struct qib_pportdata *ppd)
6069 {
6070 unsigned long flags;
6071 struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data;
6072 struct qib_devdata *dd = ppd->dd;
6073 u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N;
6074
6075 mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx);
6076 qd->ppd = ppd;
6077 qib_qsfp_init(qd, qsfp_7322_event);
6078 spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
6079 dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert));
6080 dd->cspec->gpio_mask |= mod_prs_bit;
6081 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
6082 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
6083 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
6084 }
6085
6086 /*
6087 * called at device initialization time, and also if the txselect
6088 * module parameter is changed. This is used for cables that don't
6089 * have valid QSFP EEPROMs (not present, or attenuation is zero).
6090 * We initialize to the default, then if there is a specific
6091 * unit,port match, we use that (and set it immediately, for the
6092 * current speed, if the link is at INIT or better).
6093 * String format is "default# unit#,port#=# ... u,p=#", separators must
6094 * be a SPACE character. A newline terminates. The u,p=# tuples may
6095 * optionally have "u,p=#,#", where the final # is the H1 value
6096 * The last specific match is used (actually, all are used, but last
6097 * one is the one that winds up set); if none at all, fall back on default.
6098 */
6099 static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
6100 {
6101 char *nxt, *str;
6102 u32 pidx, unit, port, deflt, h1;
6103 unsigned long val;
6104 int any = 0, seth1;
6105 int txdds_size;
6106
6107 str = txselect_list;
6108
6109 /* default number is validated in setup_txselect() */
6110 deflt = simple_strtoul(str, &nxt, 0);
6111 for (pidx = 0; pidx < dd->num_pports; ++pidx)
6112 dd->pport[pidx].cpspec->no_eep = deflt;
6113
6114 txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ;
6115 if (IS_QME(dd) || IS_QMH(dd))
6116 txdds_size += TXDDS_MFG_SZ;
6117
6118 while (*nxt && nxt[1]) {
6119 str = ++nxt;
6120 unit = simple_strtoul(str, &nxt, 0);
6121 if (nxt == str || !*nxt || *nxt != ',') {
6122 while (*nxt && *nxt++ != ' ') /* skip to next, if any */
6123 ;
6124 continue;
6125 }
6126 str = ++nxt;
6127 port = simple_strtoul(str, &nxt, 0);
6128 if (nxt == str || *nxt != '=') {
6129 while (*nxt && *nxt++ != ' ') /* skip to next, if any */
6130 ;
6131 continue;
6132 }
6133 str = ++nxt;
6134 val = simple_strtoul(str, &nxt, 0);
6135 if (nxt == str) {
6136 while (*nxt && *nxt++ != ' ') /* skip to next, if any */
6137 ;
6138 continue;
6139 }
6140 if (val >= txdds_size)
6141 continue;
6142 seth1 = 0;
6143 h1 = 0; /* gcc thinks it might be used uninitted */
6144 if (*nxt == ',' && nxt[1]) {
6145 str = ++nxt;
6146 h1 = (u32)simple_strtoul(str, &nxt, 0);
6147 if (nxt == str)
6148 while (*nxt && *nxt++ != ' ') /* skip */
6149 ;
6150 else
6151 seth1 = 1;
6152 }
6153 for (pidx = 0; dd->unit == unit && pidx < dd->num_pports;
6154 ++pidx) {
6155 struct qib_pportdata *ppd = &dd->pport[pidx];
6156
6157 if (ppd->port != port || !ppd->link_speed_supported)
6158 continue;
6159 ppd->cpspec->no_eep = val;
6160 if (seth1)
6161 ppd->cpspec->h1_val = h1;
6162 /* now change the IBC and serdes, overriding generic */
6163 init_txdds_table(ppd, 1);
6164 /* Re-enable the physical state machine on mezz boards
6165 * now that the correct settings have been set.
6166 * QSFP boards are handles by the QSFP event handler */
6167 if (IS_QMH(dd) || IS_QME(dd))
6168 qib_set_ib_7322_lstate(ppd, 0,
6169 QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
6170 any++;
6171 }
6172 if (*nxt == '\n')
6173 break; /* done */
6174 }
6175 if (change && !any) {
6176 /* no specific setting, use the default.
6177 * Change the IBC and serdes, but since it's
6178 * general, don't override specific settings.
6179 */
6180 for (pidx = 0; pidx < dd->num_pports; ++pidx)
6181 if (dd->pport[pidx].link_speed_supported)
6182 init_txdds_table(&dd->pport[pidx], 0);
6183 }
6184 }
6185
6186 /* handle the txselect parameter changing */
6187 static int setup_txselect(const char *str, struct kernel_param *kp)
6188 {
6189 struct qib_devdata *dd;
6190 unsigned long val;
6191 int ret;
6192
6193 if (strlen(str) >= MAX_ATTEN_LEN) {
6194 pr_info("txselect_values string too long\n");
6195 return -ENOSPC;
6196 }
6197 ret = kstrtoul(str, 0, &val);
6198 if (ret || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
6199 TXDDS_MFG_SZ)) {
6200 pr_info("txselect_values must start with a number < %d\n",
6201 TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ);
6202 return ret ? ret : -EINVAL;
6203 }
6204
6205 strcpy(txselect_list, str);
6206 list_for_each_entry(dd, &qib_dev_list, list)
6207 if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322)
6208 set_no_qsfp_atten(dd, 1);
6209 return 0;
6210 }
6211
6212 /*
6213 * Write the final few registers that depend on some of the
6214 * init setup. Done late in init, just before bringing up
6215 * the serdes.
6216 */
6217 static int qib_late_7322_initreg(struct qib_devdata *dd)
6218 {
6219 int ret = 0, n;
6220 u64 val;
6221
6222 qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
6223 qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
6224 qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
6225 qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
6226 val = qib_read_kreg64(dd, kr_sendpioavailaddr);
6227 if (val != dd->pioavailregs_phys) {
6228 qib_dev_err(dd,
6229 "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
6230 (unsigned long) dd->pioavailregs_phys,
6231 (unsigned long long) val);
6232 ret = -EINVAL;
6233 }
6234
6235 n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS;
6236 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL);
6237 /* driver sends get pkey, lid, etc. checking also, to catch bugs */
6238 qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL);
6239
6240 qib_register_observer(dd, &sendctrl_0_observer);
6241 qib_register_observer(dd, &sendctrl_1_observer);
6242
6243 dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN;
6244 qib_write_kreg(dd, kr_control, dd->control);
6245 /*
6246 * Set SendDmaFetchPriority and init Tx params, including
6247 * QSFP handler on boards that have QSFP.
6248 * First set our default attenuation entry for cables that
6249 * don't have valid attenuation.
6250 */
6251 set_no_qsfp_atten(dd, 0);
6252 for (n = 0; n < dd->num_pports; ++n) {
6253 struct qib_pportdata *ppd = dd->pport + n;
6254
6255 qib_write_kreg_port(ppd, krp_senddmaprioritythld,
6256 sdma_fetch_prio & 0xf);
6257 /* Initialize qsfp if present on board. */
6258 if (dd->flags & QIB_HAS_QSFP)
6259 qib_init_7322_qsfp(ppd);
6260 }
6261 dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN;
6262 qib_write_kreg(dd, kr_control, dd->control);
6263
6264 return ret;
6265 }
6266
6267 /* per IB port errors. */
6268 #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \
6269 MASK_ACROSS(8, 15))
6270 #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41))
6271 #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \
6272 MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \
6273 MASK_ACROSS(0, 11))
6274
6275 /*
6276 * Write the initialization per-port registers that need to be done at
6277 * driver load and after reset completes (i.e., that aren't done as part
6278 * of other init procedures called from qib_init.c).
6279 * Some of these should be redundant on reset, but play safe.
6280 */
6281 static void write_7322_init_portregs(struct qib_pportdata *ppd)
6282 {
6283 u64 val;
6284 int i;
6285
6286 if (!ppd->link_speed_supported) {
6287 /* no buffer credits for this port */
6288 for (i = 1; i < 8; i++)
6289 qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0);
6290 qib_write_kreg_port(ppd, krp_ibcctrl_b, 0);
6291 qib_write_kreg(ppd->dd, kr_scratch, 0);
6292 return;
6293 }
6294
6295 /*
6296 * Set the number of supported virtual lanes in IBC,
6297 * for flow control packet handling on unsupported VLs
6298 */
6299 val = qib_read_kreg_port(ppd, krp_ibsdtestiftx);
6300 val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP);
6301 val |= (u64)(ppd->vls_supported - 1) <<
6302 SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP);
6303 qib_write_kreg_port(ppd, krp_ibsdtestiftx, val);
6304
6305 qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP);
6306
6307 /* enable tx header checking */
6308 qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY |
6309 IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID |
6310 IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ);
6311
6312 qib_write_kreg_port(ppd, krp_ncmodectrl,
6313 SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal));
6314
6315 /*
6316 * Unconditionally clear the bufmask bits. If SDMA is
6317 * enabled, we'll set them appropriately later.
6318 */
6319 qib_write_kreg_port(ppd, krp_senddmabufmask0, 0);
6320 qib_write_kreg_port(ppd, krp_senddmabufmask1, 0);
6321 qib_write_kreg_port(ppd, krp_senddmabufmask2, 0);
6322 if (ppd->dd->cspec->r1)
6323 ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate);
6324 }
6325
6326 /*
6327 * Write the initialization per-device registers that need to be done at
6328 * driver load and after reset completes (i.e., that aren't done as part
6329 * of other init procedures called from qib_init.c). Also write per-port
6330 * registers that are affected by overall device config, such as QP mapping
6331 * Some of these should be redundant on reset, but play safe.
6332 */
6333 static void write_7322_initregs(struct qib_devdata *dd)
6334 {
6335 struct qib_pportdata *ppd;
6336 int i, pidx;
6337 u64 val;
6338
6339 /* Set Multicast QPs received by port 2 to map to context one. */
6340 qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1);
6341
6342 for (pidx = 0; pidx < dd->num_pports; ++pidx) {
6343 unsigned n, regno;
6344 unsigned long flags;
6345
6346 if (dd->n_krcv_queues < 2 ||
6347 !dd->pport[pidx].link_speed_supported)
6348 continue;
6349
6350 ppd = &dd->pport[pidx];
6351
6352 /* be paranoid against later code motion, etc. */
6353 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
6354 ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable);
6355 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
6356
6357 /* Initialize QP to context mapping */
6358 regno = krp_rcvqpmaptable;
6359 val = 0;
6360 if (dd->num_pports > 1)
6361 n = dd->first_user_ctxt / dd->num_pports;
6362 else
6363 n = dd->first_user_ctxt - 1;
6364 for (i = 0; i < 32; ) {
6365 unsigned ctxt;
6366
6367 if (dd->num_pports > 1)
6368 ctxt = (i % n) * dd->num_pports + pidx;
6369 else if (i % n)
6370 ctxt = (i % n) + 1;
6371 else
6372 ctxt = ppd->hw_pidx;
6373 val |= ctxt << (5 * (i % 6));
6374 i++;
6375 if (i % 6 == 0) {
6376 qib_write_kreg_port(ppd, regno, val);
6377 val = 0;
6378 regno++;
6379 }
6380 }
6381 qib_write_kreg_port(ppd, regno, val);
6382 }
6383
6384 /*
6385 * Setup up interrupt mitigation for kernel contexts, but
6386 * not user contexts (user contexts use interrupts when
6387 * stalled waiting for any packet, so want those interrupts
6388 * right away).
6389 */
6390 for (i = 0; i < dd->first_user_ctxt; i++) {
6391 dd->cspec->rcvavail_timeout[i] = rcv_int_timeout;
6392 qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout);
6393 }
6394
6395 /*
6396 * Initialize as (disabled) rcvflow tables. Application code
6397 * will setup each flow as it uses the flow.
6398 * Doesn't clear any of the error bits that might be set.
6399 */
6400 val = TIDFLOW_ERRBITS; /* these are W1C */
6401 for (i = 0; i < dd->cfgctxts; i++) {
6402 int flow;
6403 for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++)
6404 qib_write_ureg(dd, ur_rcvflowtable+flow, val, i);
6405 }
6406
6407 /*
6408 * dual cards init to dual port recovery, single port cards to
6409 * the one port. Dual port cards may later adjust to 1 port,
6410 * and then back to dual port if both ports are connected
6411 * */
6412 if (dd->num_pports)
6413 setup_7322_link_recovery(dd->pport, dd->num_pports > 1);
6414 }
6415
6416 static int qib_init_7322_variables(struct qib_devdata *dd)
6417 {
6418 struct qib_pportdata *ppd;
6419 unsigned features, pidx, sbufcnt;
6420 int ret, mtu;
6421 u32 sbufs, updthresh;
6422
6423 /* pport structs are contiguous, allocated after devdata */
6424 ppd = (struct qib_pportdata *)(dd + 1);
6425 dd->pport = ppd;
6426 ppd[0].dd = dd;
6427 ppd[1].dd = dd;
6428
6429 dd->cspec = (struct qib_chip_specific *)(ppd + 2);
6430
6431 ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1);
6432 ppd[1].cpspec = &ppd[0].cpspec[1];
6433 ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */
6434 ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */
6435
6436 spin_lock_init(&dd->cspec->rcvmod_lock);
6437 spin_lock_init(&dd->cspec->gpio_lock);
6438
6439 /* we haven't yet set QIB_PRESENT, so use read directly */
6440 dd->revision = readq(&dd->kregbase[kr_revision]);
6441
6442 if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
6443 qib_dev_err(dd,
6444 "Revision register read failure, giving up initialization\n");
6445 ret = -ENODEV;
6446 goto bail;
6447 }
6448 dd->flags |= QIB_PRESENT; /* now register routines work */
6449
6450 dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor);
6451 dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor);
6452 dd->cspec->r1 = dd->minrev == 1;
6453
6454 get_7322_chip_params(dd);
6455 features = qib_7322_boardname(dd);
6456
6457 /* now that piobcnt2k and 4k set, we can allocate these */
6458 sbufcnt = dd->piobcnt2k + dd->piobcnt4k +
6459 NUM_VL15_BUFS + BITS_PER_LONG - 1;
6460 sbufcnt /= BITS_PER_LONG;
6461 dd->cspec->sendchkenable = kmalloc(sbufcnt *
6462 sizeof(*dd->cspec->sendchkenable), GFP_KERNEL);
6463 dd->cspec->sendgrhchk = kmalloc(sbufcnt *
6464 sizeof(*dd->cspec->sendgrhchk), GFP_KERNEL);
6465 dd->cspec->sendibchk = kmalloc(sbufcnt *
6466 sizeof(*dd->cspec->sendibchk), GFP_KERNEL);
6467 if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk ||
6468 !dd->cspec->sendibchk) {
6469 qib_dev_err(dd, "Failed allocation for hdrchk bitmaps\n");
6470 ret = -ENOMEM;
6471 goto bail;
6472 }
6473
6474 ppd = dd->pport;
6475
6476 /*
6477 * GPIO bits for TWSI data and clock,
6478 * used for serial EEPROM.
6479 */
6480 dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
6481 dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
6482 dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV;
6483
6484 dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY |
6485 QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP |
6486 QIB_HAS_THRESH_UPDATE |
6487 (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0);
6488 dd->flags |= qib_special_trigger ?
6489 QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA;
6490
6491 /*
6492 * Setup initial values. These may change when PAT is enabled, but
6493 * we need these to do initial chip register accesses.
6494 */
6495 qib_7322_set_baseaddrs(dd);
6496
6497 mtu = ib_mtu_enum_to_int(qib_ibmtu);
6498 if (mtu == -1)
6499 mtu = QIB_DEFAULT_MTU;
6500
6501 dd->cspec->int_enable_mask = QIB_I_BITSEXTANT;
6502 /* all hwerrors become interrupts, unless special purposed */
6503 dd->cspec->hwerrmask = ~0ULL;
6504 /* link_recovery setup causes these errors, so ignore them,
6505 * other than clearing them when they occur */
6506 dd->cspec->hwerrmask &=
6507 ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) |
6508 SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) |
6509 HWE_MASK(LATriggered));
6510
6511 for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) {
6512 struct qib_chippport_specific *cp = ppd->cpspec;
6513 ppd->link_speed_supported = features & PORT_SPD_CAP;
6514 features >>= PORT_SPD_CAP_SHIFT;
6515 if (!ppd->link_speed_supported) {
6516 /* single port mode (7340, or configured) */
6517 dd->skip_kctxt_mask |= 1 << pidx;
6518 if (pidx == 0) {
6519 /* Make sure port is disabled. */
6520 qib_write_kreg_port(ppd, krp_rcvctrl, 0);
6521 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0);
6522 ppd[0] = ppd[1];
6523 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask,
6524 IBSerdesPClkNotDetectMask_0)
6525 | SYM_MASK(HwErrMask,
6526 SDmaMemReadErrMask_0));
6527 dd->cspec->int_enable_mask &= ~(
6528 SYM_MASK(IntMask, SDmaCleanupDoneMask_0) |
6529 SYM_MASK(IntMask, SDmaIdleIntMask_0) |
6530 SYM_MASK(IntMask, SDmaProgressIntMask_0) |
6531 SYM_MASK(IntMask, SDmaIntMask_0) |
6532 SYM_MASK(IntMask, ErrIntMask_0) |
6533 SYM_MASK(IntMask, SendDoneIntMask_0));
6534 } else {
6535 /* Make sure port is disabled. */
6536 qib_write_kreg_port(ppd, krp_rcvctrl, 0);
6537 qib_write_kreg_port(ppd, krp_ibcctrl_a, 0);
6538 dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask,
6539 IBSerdesPClkNotDetectMask_1)
6540 | SYM_MASK(HwErrMask,
6541 SDmaMemReadErrMask_1));
6542 dd->cspec->int_enable_mask &= ~(
6543 SYM_MASK(IntMask, SDmaCleanupDoneMask_1) |
6544 SYM_MASK(IntMask, SDmaIdleIntMask_1) |
6545 SYM_MASK(IntMask, SDmaProgressIntMask_1) |
6546 SYM_MASK(IntMask, SDmaIntMask_1) |
6547 SYM_MASK(IntMask, ErrIntMask_1) |
6548 SYM_MASK(IntMask, SendDoneIntMask_1));
6549 }
6550 continue;
6551 }
6552
6553 dd->num_pports++;
6554 qib_init_pportdata(ppd, dd, pidx, dd->num_pports);
6555
6556 ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
6557 ppd->link_width_enabled = IB_WIDTH_4X;
6558 ppd->link_speed_enabled = ppd->link_speed_supported;
6559 /*
6560 * Set the initial values to reasonable default, will be set
6561 * for real when link is up.
6562 */
6563 ppd->link_width_active = IB_WIDTH_4X;
6564 ppd->link_speed_active = QIB_IB_SDR;
6565 ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS];
6566 switch (qib_num_cfg_vls) {
6567 case 1:
6568 ppd->vls_supported = IB_VL_VL0;
6569 break;
6570 case 2:
6571 ppd->vls_supported = IB_VL_VL0_1;
6572 break;
6573 default:
6574 qib_devinfo(dd->pcidev,
6575 "Invalid num_vls %u, using 4 VLs\n",
6576 qib_num_cfg_vls);
6577 qib_num_cfg_vls = 4;
6578 /* fall through */
6579 case 4:
6580 ppd->vls_supported = IB_VL_VL0_3;
6581 break;
6582 case 8:
6583 if (mtu <= 2048)
6584 ppd->vls_supported = IB_VL_VL0_7;
6585 else {
6586 qib_devinfo(dd->pcidev,
6587 "Invalid num_vls %u for MTU %d "
6588 ", using 4 VLs\n",
6589 qib_num_cfg_vls, mtu);
6590 ppd->vls_supported = IB_VL_VL0_3;
6591 qib_num_cfg_vls = 4;
6592 }
6593 break;
6594 }
6595 ppd->vls_operational = ppd->vls_supported;
6596
6597 init_waitqueue_head(&cp->autoneg_wait);
6598 INIT_DELAYED_WORK(&cp->autoneg_work,
6599 autoneg_7322_work);
6600 if (ppd->dd->cspec->r1)
6601 INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work);
6602
6603 /*
6604 * For Mez and similar cards, no qsfp info, so do
6605 * the "cable info" setup here. Can be overridden
6606 * in adapter-specific routines.
6607 */
6608 if (!(dd->flags & QIB_HAS_QSFP)) {
6609 if (!IS_QMH(dd) && !IS_QME(dd))
6610 qib_devinfo(dd->pcidev,
6611 "IB%u:%u: Unknown mezzanine card type\n",
6612 dd->unit, ppd->port);
6613 cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
6614 /*
6615 * Choose center value as default tx serdes setting
6616 * until changed through module parameter.
6617 */
6618 ppd->cpspec->no_eep = IS_QMH(dd) ?
6619 TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4;
6620 } else
6621 cp->h1_val = H1_FORCE_VAL;
6622
6623 /* Avoid writes to chip for mini_init */
6624 if (!qib_mini_init)
6625 write_7322_init_portregs(ppd);
6626
6627 init_timer(&cp->chase_timer);
6628 cp->chase_timer.function = reenable_chase;
6629 cp->chase_timer.data = (unsigned long)ppd;
6630
6631 ppd++;
6632 }
6633
6634 dd->rcvhdrentsize = qib_rcvhdrentsize ?
6635 qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE;
6636 dd->rcvhdrsize = qib_rcvhdrsize ?
6637 qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE;
6638 dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
6639
6640 /* we always allocate at least 2048 bytes for eager buffers */
6641 dd->rcvegrbufsize = max(mtu, 2048);
6642 BUG_ON(!is_power_of_2(dd->rcvegrbufsize));
6643 dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
6644
6645 qib_7322_tidtemplate(dd);
6646
6647 /*
6648 * We can request a receive interrupt for 1 or
6649 * more packets from current offset.
6650 */
6651 dd->rhdrhead_intr_off =
6652 (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT;
6653
6654 /* setup the stats timer; the add_timer is done at end of init */
6655 init_timer(&dd->stats_timer);
6656 dd->stats_timer.function = qib_get_7322_faststats;
6657 dd->stats_timer.data = (unsigned long) dd;
6658
6659 dd->ureg_align = 0x10000; /* 64KB alignment */
6660
6661 dd->piosize2kmax_dwords = dd->piosize2k >> 2;
6662
6663 qib_7322_config_ctxts(dd);
6664 qib_set_ctxtcnt(dd);
6665
6666 if (qib_wc_pat) {
6667 resource_size_t vl15off;
6668 /*
6669 * We do not set WC on the VL15 buffers to avoid
6670 * a rare problem with unaligned writes from
6671 * interrupt-flushed store buffers, so we need
6672 * to map those separately here. We can't solve
6673 * this for the rarely used mtrr case.
6674 */
6675 ret = init_chip_wc_pat(dd, 0);
6676 if (ret)
6677 goto bail;
6678
6679 /* vl15 buffers start just after the 4k buffers */
6680 vl15off = dd->physaddr + (dd->piobufbase >> 32) +
6681 dd->piobcnt4k * dd->align4k;
6682 dd->piovl15base = ioremap_nocache(vl15off,
6683 NUM_VL15_BUFS * dd->align4k);
6684 if (!dd->piovl15base) {
6685 ret = -ENOMEM;
6686 goto bail;
6687 }
6688 }
6689 qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
6690
6691 ret = 0;
6692 if (qib_mini_init)
6693 goto bail;
6694 if (!dd->num_pports) {
6695 qib_dev_err(dd, "No ports enabled, giving up initialization\n");
6696 goto bail; /* no error, so can still figure out why err */
6697 }
6698
6699 write_7322_initregs(dd);
6700 ret = qib_create_ctxts(dd);
6701 init_7322_cntrnames(dd);
6702
6703 updthresh = 8U; /* update threshold */
6704
6705 /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA.
6706 * reserve the update threshold amount for other kernel use, such
6707 * as sending SMI, MAD, and ACKs, or 3, whichever is greater,
6708 * unless we aren't enabling SDMA, in which case we want to use
6709 * all the 4k bufs for the kernel.
6710 * if this was less than the update threshold, we could wait
6711 * a long time for an update. Coded this way because we
6712 * sometimes change the update threshold for various reasons,
6713 * and we want this to remain robust.
6714 */
6715 if (dd->flags & QIB_HAS_SEND_DMA) {
6716 dd->cspec->sdmabufcnt = dd->piobcnt4k;
6717 sbufs = updthresh > 3 ? updthresh : 3;
6718 } else {
6719 dd->cspec->sdmabufcnt = 0;
6720 sbufs = dd->piobcnt4k;
6721 }
6722 dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k -
6723 dd->cspec->sdmabufcnt;
6724 dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs;
6725 dd->cspec->lastbuf_for_pio--; /* range is <= , not < */
6726 dd->last_pio = dd->cspec->lastbuf_for_pio;
6727 dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ?
6728 dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0;
6729
6730 /*
6731 * If we have 16 user contexts, we will have 7 sbufs
6732 * per context, so reduce the update threshold to match. We
6733 * want to update before we actually run out, at low pbufs/ctxt
6734 * so give ourselves some margin.
6735 */
6736 if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh)
6737 updthresh = dd->pbufsctxt - 2;
6738 dd->cspec->updthresh_dflt = updthresh;
6739 dd->cspec->updthresh = updthresh;
6740
6741 /* before full enable, no interrupts, no locking needed */
6742 dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld))
6743 << SYM_LSB(SendCtrl, AvailUpdThld)) |
6744 SYM_MASK(SendCtrl, SendBufAvailPad64Byte);
6745
6746 dd->psxmitwait_supported = 1;
6747 dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE;
6748 bail:
6749 if (!dd->ctxtcnt)
6750 dd->ctxtcnt = 1; /* for other initialization code */
6751
6752 return ret;
6753 }
6754
6755 static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
6756 u32 *pbufnum)
6757 {
6758 u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
6759 struct qib_devdata *dd = ppd->dd;
6760
6761 /* last is same for 2k and 4k, because we use 4k if all 2k busy */
6762 if (pbc & PBC_7322_VL15_SEND) {
6763 first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx;
6764 last = first;
6765 } else {
6766 if ((plen + 1) > dd->piosize2kmax_dwords)
6767 first = dd->piobcnt2k;
6768 else
6769 first = 0;
6770 last = dd->cspec->lastbuf_for_pio;
6771 }
6772 return qib_getsendbuf_range(dd, pbufnum, first, last);
6773 }
6774
6775 static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv,
6776 u32 start)
6777 {
6778 qib_write_kreg_port(ppd, krp_psinterval, intv);
6779 qib_write_kreg_port(ppd, krp_psstart, start);
6780 }
6781
6782 /*
6783 * Must be called with sdma_lock held, or before init finished.
6784 */
6785 static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
6786 {
6787 qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt);
6788 }
6789
6790 /*
6791 * sdma_lock should be acquired before calling this routine
6792 */
6793 static void dump_sdma_7322_state(struct qib_pportdata *ppd)
6794 {
6795 u64 reg, reg1, reg2;
6796
6797 reg = qib_read_kreg_port(ppd, krp_senddmastatus);
6798 qib_dev_porterr(ppd->dd, ppd->port,
6799 "SDMA senddmastatus: 0x%016llx\n", reg);
6800
6801 reg = qib_read_kreg_port(ppd, krp_sendctrl);
6802 qib_dev_porterr(ppd->dd, ppd->port,
6803 "SDMA sendctrl: 0x%016llx\n", reg);
6804
6805 reg = qib_read_kreg_port(ppd, krp_senddmabase);
6806 qib_dev_porterr(ppd->dd, ppd->port,
6807 "SDMA senddmabase: 0x%016llx\n", reg);
6808
6809 reg = qib_read_kreg_port(ppd, krp_senddmabufmask0);
6810 reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1);
6811 reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2);
6812 qib_dev_porterr(ppd->dd, ppd->port,
6813 "SDMA senddmabufmask 0:%llx 1:%llx 2:%llx\n",
6814 reg, reg1, reg2);
6815
6816 /* get bufuse bits, clear them, and print them again if non-zero */
6817 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0);
6818 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg);
6819 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1);
6820 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1);
6821 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2);
6822 qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2);
6823 /* 0 and 1 should always be zero, so print as short form */
6824 qib_dev_porterr(ppd->dd, ppd->port,
6825 "SDMA current senddmabuf_use 0:%llx 1:%llx 2:%llx\n",
6826 reg, reg1, reg2);
6827 reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0);
6828 reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1);
6829 reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2);
6830 /* 0 and 1 should always be zero, so print as short form */
6831 qib_dev_porterr(ppd->dd, ppd->port,
6832 "SDMA cleared senddmabuf_use 0:%llx 1:%llx 2:%llx\n",
6833 reg, reg1, reg2);
6834
6835 reg = qib_read_kreg_port(ppd, krp_senddmatail);
6836 qib_dev_porterr(ppd->dd, ppd->port,
6837 "SDMA senddmatail: 0x%016llx\n", reg);
6838
6839 reg = qib_read_kreg_port(ppd, krp_senddmahead);
6840 qib_dev_porterr(ppd->dd, ppd->port,
6841 "SDMA senddmahead: 0x%016llx\n", reg);
6842
6843 reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr);
6844 qib_dev_porterr(ppd->dd, ppd->port,
6845 "SDMA senddmaheadaddr: 0x%016llx\n", reg);
6846
6847 reg = qib_read_kreg_port(ppd, krp_senddmalengen);
6848 qib_dev_porterr(ppd->dd, ppd->port,
6849 "SDMA senddmalengen: 0x%016llx\n", reg);
6850
6851 reg = qib_read_kreg_port(ppd, krp_senddmadesccnt);
6852 qib_dev_porterr(ppd->dd, ppd->port,
6853 "SDMA senddmadesccnt: 0x%016llx\n", reg);
6854
6855 reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt);
6856 qib_dev_porterr(ppd->dd, ppd->port,
6857 "SDMA senddmaidlecnt: 0x%016llx\n", reg);
6858
6859 reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld);
6860 qib_dev_porterr(ppd->dd, ppd->port,
6861 "SDMA senddmapriorityhld: 0x%016llx\n", reg);
6862
6863 reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt);
6864 qib_dev_porterr(ppd->dd, ppd->port,
6865 "SDMA senddmareloadcnt: 0x%016llx\n", reg);
6866
6867 dump_sdma_state(ppd);
6868 }
6869
6870 static struct sdma_set_state_action sdma_7322_action_table[] = {
6871 [qib_sdma_state_s00_hw_down] = {
6872 .go_s99_running_tofalse = 1,
6873 .op_enable = 0,
6874 .op_intenable = 0,
6875 .op_halt = 0,
6876 .op_drain = 0,
6877 },
6878 [qib_sdma_state_s10_hw_start_up_wait] = {
6879 .op_enable = 0,
6880 .op_intenable = 1,
6881 .op_halt = 1,
6882 .op_drain = 0,
6883 },
6884 [qib_sdma_state_s20_idle] = {
6885 .op_enable = 1,
6886 .op_intenable = 1,
6887 .op_halt = 1,
6888 .op_drain = 0,
6889 },
6890 [qib_sdma_state_s30_sw_clean_up_wait] = {
6891 .op_enable = 0,
6892 .op_intenable = 1,
6893 .op_halt = 1,
6894 .op_drain = 0,
6895 },
6896 [qib_sdma_state_s40_hw_clean_up_wait] = {
6897 .op_enable = 1,
6898 .op_intenable = 1,
6899 .op_halt = 1,
6900 .op_drain = 0,
6901 },
6902 [qib_sdma_state_s50_hw_halt_wait] = {
6903 .op_enable = 1,
6904 .op_intenable = 1,
6905 .op_halt = 1,
6906 .op_drain = 1,
6907 },
6908 [qib_sdma_state_s99_running] = {
6909 .op_enable = 1,
6910 .op_intenable = 1,
6911 .op_halt = 0,
6912 .op_drain = 0,
6913 .go_s99_running_totrue = 1,
6914 },
6915 };
6916
6917 static void qib_7322_sdma_init_early(struct qib_pportdata *ppd)
6918 {
6919 ppd->sdma_state.set_state_action = sdma_7322_action_table;
6920 }
6921
6922 static int init_sdma_7322_regs(struct qib_pportdata *ppd)
6923 {
6924 struct qib_devdata *dd = ppd->dd;
6925 unsigned lastbuf, erstbuf;
6926 u64 senddmabufmask[3] = { 0 };
6927 int n, ret = 0;
6928
6929 qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys);
6930 qib_sdma_7322_setlengen(ppd);
6931 qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */
6932 qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt);
6933 qib_write_kreg_port(ppd, krp_senddmadesccnt, 0);
6934 qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys);
6935
6936 if (dd->num_pports)
6937 n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */
6938 else
6939 n = dd->cspec->sdmabufcnt; /* failsafe for init */
6940 erstbuf = (dd->piobcnt2k + dd->piobcnt4k) -
6941 ((dd->num_pports == 1 || ppd->port == 2) ? n :
6942 dd->cspec->sdmabufcnt);
6943 lastbuf = erstbuf + n;
6944
6945 ppd->sdma_state.first_sendbuf = erstbuf;
6946 ppd->sdma_state.last_sendbuf = lastbuf;
6947 for (; erstbuf < lastbuf; ++erstbuf) {
6948 unsigned word = erstbuf / BITS_PER_LONG;
6949 unsigned bit = erstbuf & (BITS_PER_LONG - 1);
6950
6951 BUG_ON(word >= 3);
6952 senddmabufmask[word] |= 1ULL << bit;
6953 }
6954 qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]);
6955 qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]);
6956 qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]);
6957 return ret;
6958 }
6959
6960 /* sdma_lock must be held */
6961 static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd)
6962 {
6963 struct qib_devdata *dd = ppd->dd;
6964 int sane;
6965 int use_dmahead;
6966 u16 swhead;
6967 u16 swtail;
6968 u16 cnt;
6969 u16 hwhead;
6970
6971 use_dmahead = __qib_sdma_running(ppd) &&
6972 (dd->flags & QIB_HAS_SDMA_TIMEOUT);
6973 retry:
6974 hwhead = use_dmahead ?
6975 (u16) le64_to_cpu(*ppd->sdma_head_dma) :
6976 (u16) qib_read_kreg_port(ppd, krp_senddmahead);
6977
6978 swhead = ppd->sdma_descq_head;
6979 swtail = ppd->sdma_descq_tail;
6980 cnt = ppd->sdma_descq_cnt;
6981
6982 if (swhead < swtail)
6983 /* not wrapped */
6984 sane = (hwhead >= swhead) & (hwhead <= swtail);
6985 else if (swhead > swtail)
6986 /* wrapped around */
6987 sane = ((hwhead >= swhead) && (hwhead < cnt)) ||
6988 (hwhead <= swtail);
6989 else
6990 /* empty */
6991 sane = (hwhead == swhead);
6992
6993 if (unlikely(!sane)) {
6994 if (use_dmahead) {
6995 /* try one more time, directly from the register */
6996 use_dmahead = 0;
6997 goto retry;
6998 }
6999 /* proceed as if no progress */
7000 hwhead = swhead;
7001 }
7002
7003 return hwhead;
7004 }
7005
7006 static int qib_sdma_7322_busy(struct qib_pportdata *ppd)
7007 {
7008 u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus);
7009
7010 return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) ||
7011 (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) ||
7012 !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) ||
7013 !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty));
7014 }
7015
7016 /*
7017 * Compute the amount of delay before sending the next packet if the
7018 * port's send rate differs from the static rate set for the QP.
7019 * The delay affects the next packet and the amount of the delay is
7020 * based on the length of the this packet.
7021 */
7022 static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen,
7023 u8 srate, u8 vl)
7024 {
7025 u8 snd_mult = ppd->delay_mult;
7026 u8 rcv_mult = ib_rate_to_delay[srate];
7027 u32 ret;
7028
7029 ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0;
7030
7031 /* Indicate VL15, else set the VL in the control word */
7032 if (vl == 15)
7033 ret |= PBC_7322_VL15_SEND_CTRL;
7034 else
7035 ret |= vl << PBC_VL_NUM_LSB;
7036 ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB;
7037
7038 return ret;
7039 }
7040
7041 /*
7042 * Enable the per-port VL15 send buffers for use.
7043 * They follow the rest of the buffers, without a config parameter.
7044 * This was in initregs, but that is done before the shadow
7045 * is set up, and this has to be done after the shadow is
7046 * set up.
7047 */
7048 static void qib_7322_initvl15_bufs(struct qib_devdata *dd)
7049 {
7050 unsigned vl15bufs;
7051
7052 vl15bufs = dd->piobcnt2k + dd->piobcnt4k;
7053 qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS,
7054 TXCHK_CHG_TYPE_KERN, NULL);
7055 }
7056
7057 static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd)
7058 {
7059 if (rcd->ctxt < NUM_IB_PORTS) {
7060 if (rcd->dd->num_pports > 1) {
7061 rcd->rcvegrcnt = KCTXT0_EGRCNT / 2;
7062 rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0;
7063 } else {
7064 rcd->rcvegrcnt = KCTXT0_EGRCNT;
7065 rcd->rcvegr_tid_base = 0;
7066 }
7067 } else {
7068 rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt;
7069 rcd->rcvegr_tid_base = KCTXT0_EGRCNT +
7070 (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt;
7071 }
7072 }
7073
7074 #define QTXSLEEPS 5000
7075 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start,
7076 u32 len, u32 which, struct qib_ctxtdata *rcd)
7077 {
7078 int i;
7079 const int last = start + len - 1;
7080 const int lastr = last / BITS_PER_LONG;
7081 u32 sleeps = 0;
7082 int wait = rcd != NULL;
7083 unsigned long flags;
7084
7085 while (wait) {
7086 unsigned long shadow;
7087 int cstart, previ = -1;
7088
7089 /*
7090 * when flipping from kernel to user, we can't change
7091 * the checking type if the buffer is allocated to the
7092 * driver. It's OK the other direction, because it's
7093 * from close, and we have just disarm'ed all the
7094 * buffers. All the kernel to kernel changes are also
7095 * OK.
7096 */
7097 for (cstart = start; cstart <= last; cstart++) {
7098 i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT)
7099 / BITS_PER_LONG;
7100 if (i != previ) {
7101 shadow = (unsigned long)
7102 le64_to_cpu(dd->pioavailregs_dma[i]);
7103 previ = i;
7104 }
7105 if (test_bit(((2 * cstart) +
7106 QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT)
7107 % BITS_PER_LONG, &shadow))
7108 break;
7109 }
7110
7111 if (cstart > last)
7112 break;
7113
7114 if (sleeps == QTXSLEEPS)
7115 break;
7116 /* make sure we see an updated copy next time around */
7117 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
7118 sleeps++;
7119 msleep(20);
7120 }
7121
7122 switch (which) {
7123 case TXCHK_CHG_TYPE_DIS1:
7124 /*
7125 * disable checking on a range; used by diags; just
7126 * one buffer, but still written generically
7127 */
7128 for (i = start; i <= last; i++)
7129 clear_bit(i, dd->cspec->sendchkenable);
7130 break;
7131
7132 case TXCHK_CHG_TYPE_ENAB1:
7133 /*
7134 * (re)enable checking on a range; used by diags; just
7135 * one buffer, but still written generically; read
7136 * scratch to be sure buffer actually triggered, not
7137 * just flushed from processor.
7138 */
7139 qib_read_kreg32(dd, kr_scratch);
7140 for (i = start; i <= last; i++)
7141 set_bit(i, dd->cspec->sendchkenable);
7142 break;
7143
7144 case TXCHK_CHG_TYPE_KERN:
7145 /* usable by kernel */
7146 for (i = start; i <= last; i++) {
7147 set_bit(i, dd->cspec->sendibchk);
7148 clear_bit(i, dd->cspec->sendgrhchk);
7149 }
7150 spin_lock_irqsave(&dd->uctxt_lock, flags);
7151 /* see if we need to raise avail update threshold */
7152 for (i = dd->first_user_ctxt;
7153 dd->cspec->updthresh != dd->cspec->updthresh_dflt
7154 && i < dd->cfgctxts; i++)
7155 if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt &&
7156 ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1)
7157 < dd->cspec->updthresh_dflt)
7158 break;
7159 spin_unlock_irqrestore(&dd->uctxt_lock, flags);
7160 if (i == dd->cfgctxts) {
7161 spin_lock_irqsave(&dd->sendctrl_lock, flags);
7162 dd->cspec->updthresh = dd->cspec->updthresh_dflt;
7163 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
7164 dd->sendctrl |= (dd->cspec->updthresh &
7165 SYM_RMASK(SendCtrl, AvailUpdThld)) <<
7166 SYM_LSB(SendCtrl, AvailUpdThld);
7167 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
7168 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
7169 }
7170 break;
7171
7172 case TXCHK_CHG_TYPE_USER:
7173 /* for user process */
7174 for (i = start; i <= last; i++) {
7175 clear_bit(i, dd->cspec->sendibchk);
7176 set_bit(i, dd->cspec->sendgrhchk);
7177 }
7178 spin_lock_irqsave(&dd->sendctrl_lock, flags);
7179 if (rcd && rcd->subctxt_cnt && ((rcd->piocnt
7180 / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) {
7181 dd->cspec->updthresh = (rcd->piocnt /
7182 rcd->subctxt_cnt) - 1;
7183 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
7184 dd->sendctrl |= (dd->cspec->updthresh &
7185 SYM_RMASK(SendCtrl, AvailUpdThld))
7186 << SYM_LSB(SendCtrl, AvailUpdThld);
7187 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
7188 sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
7189 } else
7190 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
7191 break;
7192
7193 default:
7194 break;
7195 }
7196
7197 for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i)
7198 qib_write_kreg(dd, kr_sendcheckmask + i,
7199 dd->cspec->sendchkenable[i]);
7200
7201 for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) {
7202 qib_write_kreg(dd, kr_sendgrhcheckmask + i,
7203 dd->cspec->sendgrhchk[i]);
7204 qib_write_kreg(dd, kr_sendibpktmask + i,
7205 dd->cspec->sendibchk[i]);
7206 }
7207
7208 /*
7209 * Be sure whatever we did was seen by the chip and acted upon,
7210 * before we return. Mostly important for which >= 2.
7211 */
7212 qib_read_kreg32(dd, kr_scratch);
7213 }
7214
7215
7216 /* useful for trigger analyzers, etc. */
7217 static void writescratch(struct qib_devdata *dd, u32 val)
7218 {
7219 qib_write_kreg(dd, kr_scratch, val);
7220 }
7221
7222 /* Dummy for now, use chip regs soon */
7223 static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum)
7224 {
7225 return -ENXIO;
7226 }
7227
7228 /**
7229 * qib_init_iba7322_funcs - set up the chip-specific function pointers
7230 * @dev: the pci_dev for qlogic_ib device
7231 * @ent: pci_device_id struct for this dev
7232 *
7233 * Also allocates, inits, and returns the devdata struct for this
7234 * device instance
7235 *
7236 * This is global, and is called directly at init to set up the
7237 * chip-specific function pointers for later use.
7238 */
7239 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev,
7240 const struct pci_device_id *ent)
7241 {
7242 struct qib_devdata *dd;
7243 int ret, i;
7244 u32 tabsize, actual_cnt = 0;
7245
7246 dd = qib_alloc_devdata(pdev,
7247 NUM_IB_PORTS * sizeof(struct qib_pportdata) +
7248 sizeof(struct qib_chip_specific) +
7249 NUM_IB_PORTS * sizeof(struct qib_chippport_specific));
7250 if (IS_ERR(dd))
7251 goto bail;
7252
7253 dd->f_bringup_serdes = qib_7322_bringup_serdes;
7254 dd->f_cleanup = qib_setup_7322_cleanup;
7255 dd->f_clear_tids = qib_7322_clear_tids;
7256 dd->f_free_irq = qib_7322_free_irq;
7257 dd->f_get_base_info = qib_7322_get_base_info;
7258 dd->f_get_msgheader = qib_7322_get_msgheader;
7259 dd->f_getsendbuf = qib_7322_getsendbuf;
7260 dd->f_gpio_mod = gpio_7322_mod;
7261 dd->f_eeprom_wen = qib_7322_eeprom_wen;
7262 dd->f_hdrqempty = qib_7322_hdrqempty;
7263 dd->f_ib_updown = qib_7322_ib_updown;
7264 dd->f_init_ctxt = qib_7322_init_ctxt;
7265 dd->f_initvl15_bufs = qib_7322_initvl15_bufs;
7266 dd->f_intr_fallback = qib_7322_intr_fallback;
7267 dd->f_late_initreg = qib_late_7322_initreg;
7268 dd->f_setpbc_control = qib_7322_setpbc_control;
7269 dd->f_portcntr = qib_portcntr_7322;
7270 dd->f_put_tid = qib_7322_put_tid;
7271 dd->f_quiet_serdes = qib_7322_mini_quiet_serdes;
7272 dd->f_rcvctrl = rcvctrl_7322_mod;
7273 dd->f_read_cntrs = qib_read_7322cntrs;
7274 dd->f_read_portcntrs = qib_read_7322portcntrs;
7275 dd->f_reset = qib_do_7322_reset;
7276 dd->f_init_sdma_regs = init_sdma_7322_regs;
7277 dd->f_sdma_busy = qib_sdma_7322_busy;
7278 dd->f_sdma_gethead = qib_sdma_7322_gethead;
7279 dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl;
7280 dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt;
7281 dd->f_sdma_update_tail = qib_sdma_update_7322_tail;
7282 dd->f_sendctrl = sendctrl_7322_mod;
7283 dd->f_set_armlaunch = qib_set_7322_armlaunch;
7284 dd->f_set_cntr_sample = qib_set_cntr_7322_sample;
7285 dd->f_iblink_state = qib_7322_iblink_state;
7286 dd->f_ibphys_portstate = qib_7322_phys_portstate;
7287 dd->f_get_ib_cfg = qib_7322_get_ib_cfg;
7288 dd->f_set_ib_cfg = qib_7322_set_ib_cfg;
7289 dd->f_set_ib_loopback = qib_7322_set_loopback;
7290 dd->f_get_ib_table = qib_7322_get_ib_table;
7291 dd->f_set_ib_table = qib_7322_set_ib_table;
7292 dd->f_set_intr_state = qib_7322_set_intr_state;
7293 dd->f_setextled = qib_setup_7322_setextled;
7294 dd->f_txchk_change = qib_7322_txchk_change;
7295 dd->f_update_usrhead = qib_update_7322_usrhead;
7296 dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr;
7297 dd->f_xgxs_reset = qib_7322_mini_pcs_reset;
7298 dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up;
7299 dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up;
7300 dd->f_sdma_init_early = qib_7322_sdma_init_early;
7301 dd->f_writescratch = writescratch;
7302 dd->f_tempsense_rd = qib_7322_tempsense_rd;
7303 #ifdef CONFIG_INFINIBAND_QIB_DCA
7304 dd->f_notify_dca = qib_7322_notify_dca;
7305 #endif
7306 /*
7307 * Do remaining PCIe setup and save PCIe values in dd.
7308 * Any error printing is already done by the init code.
7309 * On return, we have the chip mapped, but chip registers
7310 * are not set up until start of qib_init_7322_variables.
7311 */
7312 ret = qib_pcie_ddinit(dd, pdev, ent);
7313 if (ret < 0)
7314 goto bail_free;
7315
7316 /* initialize chip-specific variables */
7317 ret = qib_init_7322_variables(dd);
7318 if (ret)
7319 goto bail_cleanup;
7320
7321 if (qib_mini_init || !dd->num_pports)
7322 goto bail;
7323
7324 /*
7325 * Determine number of vectors we want; depends on port count
7326 * and number of configured kernel receive queues actually used.
7327 * Should also depend on whether sdma is enabled or not, but
7328 * that's such a rare testing case it's not worth worrying about.
7329 */
7330 tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table);
7331 for (i = 0; i < tabsize; i++)
7332 if ((i < ARRAY_SIZE(irq_table) &&
7333 irq_table[i].port <= dd->num_pports) ||
7334 (i >= ARRAY_SIZE(irq_table) &&
7335 dd->rcd[i - ARRAY_SIZE(irq_table)]))
7336 actual_cnt++;
7337 /* reduce by ctxt's < 2 */
7338 if (qib_krcvq01_no_msi)
7339 actual_cnt -= dd->num_pports;
7340
7341 tabsize = actual_cnt;
7342 dd->cspec->msix_entries = kzalloc(tabsize *
7343 sizeof(struct qib_msix_entry), GFP_KERNEL);
7344 if (!dd->cspec->msix_entries) {
7345 qib_dev_err(dd, "No memory for MSIx table\n");
7346 tabsize = 0;
7347 }
7348 for (i = 0; i < tabsize; i++)
7349 dd->cspec->msix_entries[i].msix.entry = i;
7350
7351 if (qib_pcie_params(dd, 8, &tabsize, dd->cspec->msix_entries))
7352 qib_dev_err(dd,
7353 "Failed to setup PCIe or interrupts; continuing anyway\n");
7354 /* may be less than we wanted, if not enough available */
7355 dd->cspec->num_msix_entries = tabsize;
7356
7357 /* setup interrupt handler */
7358 qib_setup_7322_interrupt(dd, 1);
7359
7360 /* clear diagctrl register, in case diags were running and crashed */
7361 qib_write_kreg(dd, kr_hwdiagctrl, 0);
7362 #ifdef CONFIG_INFINIBAND_QIB_DCA
7363 if (!dca_add_requester(&pdev->dev)) {
7364 qib_devinfo(dd->pcidev, "DCA enabled\n");
7365 dd->flags |= QIB_DCA_ENABLED;
7366 qib_setup_dca(dd);
7367 }
7368 #endif
7369 goto bail;
7370
7371 bail_cleanup:
7372 qib_pcie_ddcleanup(dd);
7373 bail_free:
7374 qib_free_devdata(dd);
7375 dd = ERR_PTR(ret);
7376 bail:
7377 return dd;
7378 }
7379
7380 /*
7381 * Set the table entry at the specified index from the table specifed.
7382 * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first
7383 * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR.
7384 * 'idx' below addresses the correct entry, while its 4 LSBs select the
7385 * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table.
7386 */
7387 #define DDS_ENT_AMP_LSB 14
7388 #define DDS_ENT_MAIN_LSB 9
7389 #define DDS_ENT_POST_LSB 5
7390 #define DDS_ENT_PRE_XTRA_LSB 3
7391 #define DDS_ENT_PRE_LSB 0
7392
7393 /*
7394 * Set one entry in the TxDDS table for spec'd port
7395 * ridx picks one of the entries, while tp points
7396 * to the appropriate table entry.
7397 */
7398 static void set_txdds(struct qib_pportdata *ppd, int ridx,
7399 const struct txdds_ent *tp)
7400 {
7401 struct qib_devdata *dd = ppd->dd;
7402 u32 pack_ent;
7403 int regidx;
7404
7405 /* Get correct offset in chip-space, and in source table */
7406 regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx;
7407 /*
7408 * We do not use qib_write_kreg_port() because it was intended
7409 * only for registers in the lower "port specific" pages.
7410 * So do index calculation by hand.
7411 */
7412 if (ppd->hw_pidx)
7413 regidx += (dd->palign / sizeof(u64));
7414
7415 pack_ent = tp->amp << DDS_ENT_AMP_LSB;
7416 pack_ent |= tp->main << DDS_ENT_MAIN_LSB;
7417 pack_ent |= tp->pre << DDS_ENT_PRE_LSB;
7418 pack_ent |= tp->post << DDS_ENT_POST_LSB;
7419 qib_write_kreg(dd, regidx, pack_ent);
7420 /* Prevent back-to-back writes by hitting scratch */
7421 qib_write_kreg(ppd->dd, kr_scratch, 0);
7422 }
7423
7424 static const struct vendor_txdds_ent vendor_txdds[] = {
7425 { /* Amphenol 1m 30awg NoEq */
7426 { 0x41, 0x50, 0x48 }, "584470002 ",
7427 { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 },
7428 },
7429 { /* Amphenol 3m 28awg NoEq */
7430 { 0x41, 0x50, 0x48 }, "584470004 ",
7431 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 },
7432 },
7433 { /* Finisar 3m OM2 Optical */
7434 { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL",
7435 { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 },
7436 },
7437 { /* Finisar 30m OM2 Optical */
7438 { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL",
7439 { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 },
7440 },
7441 { /* Finisar Default OM2 Optical */
7442 { 0x00, 0x90, 0x65 }, NULL,
7443 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 },
7444 },
7445 { /* Gore 1m 30awg NoEq */
7446 { 0x00, 0x21, 0x77 }, "QSN3300-1 ",
7447 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 },
7448 },
7449 { /* Gore 2m 30awg NoEq */
7450 { 0x00, 0x21, 0x77 }, "QSN3300-2 ",
7451 { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 },
7452 },
7453 { /* Gore 1m 28awg NoEq */
7454 { 0x00, 0x21, 0x77 }, "QSN3800-1 ",
7455 { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 },
7456 },
7457 { /* Gore 3m 28awg NoEq */
7458 { 0x00, 0x21, 0x77 }, "QSN3800-3 ",
7459 { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 },
7460 },
7461 { /* Gore 5m 24awg Eq */
7462 { 0x00, 0x21, 0x77 }, "QSN7000-5 ",
7463 { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 },
7464 },
7465 { /* Gore 7m 24awg Eq */
7466 { 0x00, 0x21, 0x77 }, "QSN7000-7 ",
7467 { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 },
7468 },
7469 { /* Gore 5m 26awg Eq */
7470 { 0x00, 0x21, 0x77 }, "QSN7600-5 ",
7471 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 },
7472 },
7473 { /* Gore 7m 26awg Eq */
7474 { 0x00, 0x21, 0x77 }, "QSN7600-7 ",
7475 { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 },
7476 },
7477 { /* Intersil 12m 24awg Active */
7478 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224",
7479 { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 },
7480 },
7481 { /* Intersil 10m 28awg Active */
7482 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028",
7483 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 },
7484 },
7485 { /* Intersil 7m 30awg Active */
7486 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730",
7487 { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 },
7488 },
7489 { /* Intersil 5m 32awg Active */
7490 { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532",
7491 { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 },
7492 },
7493 { /* Intersil Default Active */
7494 { 0x00, 0x30, 0xB4 }, NULL,
7495 { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 },
7496 },
7497 { /* Luxtera 20m Active Optical */
7498 { 0x00, 0x25, 0x63 }, NULL,
7499 { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 },
7500 },
7501 { /* Molex 1M Cu loopback */
7502 { 0x00, 0x09, 0x3A }, "74763-0025 ",
7503 { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 },
7504 },
7505 { /* Molex 2m 28awg NoEq */
7506 { 0x00, 0x09, 0x3A }, "74757-2201 ",
7507 { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 },
7508 },
7509 };
7510
7511 static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = {
7512 /* amp, pre, main, post */
7513 { 2, 2, 15, 6 }, /* Loopback */
7514 { 0, 0, 0, 1 }, /* 2 dB */
7515 { 0, 0, 0, 2 }, /* 3 dB */
7516 { 0, 0, 0, 3 }, /* 4 dB */
7517 { 0, 0, 0, 4 }, /* 5 dB */
7518 { 0, 0, 0, 5 }, /* 6 dB */
7519 { 0, 0, 0, 6 }, /* 7 dB */
7520 { 0, 0, 0, 7 }, /* 8 dB */
7521 { 0, 0, 0, 8 }, /* 9 dB */
7522 { 0, 0, 0, 9 }, /* 10 dB */
7523 { 0, 0, 0, 10 }, /* 11 dB */
7524 { 0, 0, 0, 11 }, /* 12 dB */
7525 { 0, 0, 0, 12 }, /* 13 dB */
7526 { 0, 0, 0, 13 }, /* 14 dB */
7527 { 0, 0, 0, 14 }, /* 15 dB */
7528 { 0, 0, 0, 15 }, /* 16 dB */
7529 };
7530
7531 static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = {
7532 /* amp, pre, main, post */
7533 { 2, 2, 15, 6 }, /* Loopback */
7534 { 0, 0, 0, 8 }, /* 2 dB */
7535 { 0, 0, 0, 8 }, /* 3 dB */
7536 { 0, 0, 0, 9 }, /* 4 dB */
7537 { 0, 0, 0, 9 }, /* 5 dB */
7538 { 0, 0, 0, 10 }, /* 6 dB */
7539 { 0, 0, 0, 10 }, /* 7 dB */
7540 { 0, 0, 0, 11 }, /* 8 dB */
7541 { 0, 0, 0, 11 }, /* 9 dB */
7542 { 0, 0, 0, 12 }, /* 10 dB */
7543 { 0, 0, 0, 12 }, /* 11 dB */
7544 { 0, 0, 0, 13 }, /* 12 dB */
7545 { 0, 0, 0, 13 }, /* 13 dB */
7546 { 0, 0, 0, 14 }, /* 14 dB */
7547 { 0, 0, 0, 14 }, /* 15 dB */
7548 { 0, 0, 0, 15 }, /* 16 dB */
7549 };
7550
7551 static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = {
7552 /* amp, pre, main, post */
7553 { 2, 2, 15, 6 }, /* Loopback */
7554 { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */
7555 { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */
7556 { 0, 1, 0, 11 }, /* 4 dB */
7557 { 0, 1, 0, 13 }, /* 5 dB */
7558 { 0, 1, 0, 15 }, /* 6 dB */
7559 { 0, 1, 3, 15 }, /* 7 dB */
7560 { 0, 1, 7, 15 }, /* 8 dB */
7561 { 0, 1, 7, 15 }, /* 9 dB */
7562 { 0, 1, 8, 15 }, /* 10 dB */
7563 { 0, 1, 9, 15 }, /* 11 dB */
7564 { 0, 1, 10, 15 }, /* 12 dB */
7565 { 0, 2, 6, 15 }, /* 13 dB */
7566 { 0, 2, 7, 15 }, /* 14 dB */
7567 { 0, 2, 8, 15 }, /* 15 dB */
7568 { 0, 2, 9, 15 }, /* 16 dB */
7569 };
7570
7571 /*
7572 * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ.
7573 * These are mostly used for mez cards going through connectors
7574 * and backplane traces, but can be used to add other "unusual"
7575 * table values as well.
7576 */
7577 static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = {
7578 /* amp, pre, main, post */
7579 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
7580 { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
7581 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
7582 { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
7583 { 0, 0, 0, 3 }, /* QMH7342 backplane settings */
7584 { 0, 0, 0, 4 }, /* QMH7342 backplane settings */
7585 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */
7586 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */
7587 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */
7588 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */
7589 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */
7590 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */
7591 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */
7592 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */
7593 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */
7594 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */
7595 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */
7596 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */
7597 };
7598
7599 static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
7600 /* amp, pre, main, post */
7601 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
7602 { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
7603 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
7604 { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
7605 { 0, 0, 0, 9 }, /* QMH7342 backplane settings */
7606 { 0, 0, 0, 10 }, /* QMH7342 backplane settings */
7607 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */
7608 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */
7609 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */
7610 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */
7611 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */
7612 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */
7613 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */
7614 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */
7615 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */
7616 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */
7617 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */
7618 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */
7619 };
7620
7621 static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
7622 /* amp, pre, main, post */
7623 { 0, 1, 0, 4 }, /* QMH7342 backplane settings */
7624 { 0, 1, 0, 5 }, /* QMH7342 backplane settings */
7625 { 0, 1, 0, 6 }, /* QMH7342 backplane settings */
7626 { 0, 1, 0, 8 }, /* QMH7342 backplane settings */
7627 { 0, 1, 0, 10 }, /* QMH7342 backplane settings */
7628 { 0, 1, 0, 12 }, /* QMH7342 backplane settings */
7629 { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */
7630 { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */
7631 { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */
7632 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */
7633 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */
7634 { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */
7635 { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */
7636 { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */
7637 { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */
7638 { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */
7639 { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */
7640 { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */
7641 };
7642
7643 static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = {
7644 /* amp, pre, main, post */
7645 { 0, 0, 0, 0 }, /* QME7342 mfg settings */
7646 { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */
7647 };
7648
7649 static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
7650 unsigned atten)
7651 {
7652 /*
7653 * The attenuation table starts at 2dB for entry 1,
7654 * with entry 0 being the loopback entry.
7655 */
7656 if (atten <= 2)
7657 atten = 1;
7658 else if (atten > TXDDS_TABLE_SZ)
7659 atten = TXDDS_TABLE_SZ - 1;
7660 else
7661 atten--;
7662 return txdds + atten;
7663 }
7664
7665 /*
7666 * if override is set, the module parameter txselect has a value
7667 * for this specific port, so use it, rather than our normal mechanism.
7668 */
7669 static void find_best_ent(struct qib_pportdata *ppd,
7670 const struct txdds_ent **sdr_dds,
7671 const struct txdds_ent **ddr_dds,
7672 const struct txdds_ent **qdr_dds, int override)
7673 {
7674 struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache;
7675 int idx;
7676
7677 /* Search table of known cables */
7678 for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) {
7679 const struct vendor_txdds_ent *v = vendor_txdds + idx;
7680
7681 if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) &&
7682 (!v->partnum ||
7683 !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) {
7684 *sdr_dds = &v->sdr;
7685 *ddr_dds = &v->ddr;
7686 *qdr_dds = &v->qdr;
7687 return;
7688 }
7689 }
7690
7691 /* Active cables don't have attenuation so we only set SERDES
7692 * settings to account for the attenuation of the board traces. */
7693 if (!override && QSFP_IS_ACTIVE(qd->tech)) {
7694 *sdr_dds = txdds_sdr + ppd->dd->board_atten;
7695 *ddr_dds = txdds_ddr + ppd->dd->board_atten;
7696 *qdr_dds = txdds_qdr + ppd->dd->board_atten;
7697 return;
7698 }
7699
7700 if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] ||
7701 qd->atten[1])) {
7702 *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]);
7703 *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]);
7704 *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]);
7705 return;
7706 } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) {
7707 /*
7708 * If we have no (or incomplete) data from the cable
7709 * EEPROM, or no QSFP, or override is set, use the
7710 * module parameter value to index into the attentuation
7711 * table.
7712 */
7713 idx = ppd->cpspec->no_eep;
7714 *sdr_dds = &txdds_sdr[idx];
7715 *ddr_dds = &txdds_ddr[idx];
7716 *qdr_dds = &txdds_qdr[idx];
7717 } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
7718 /* similar to above, but index into the "extra" table. */
7719 idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ;
7720 *sdr_dds = &txdds_extra_sdr[idx];
7721 *ddr_dds = &txdds_extra_ddr[idx];
7722 *qdr_dds = &txdds_extra_qdr[idx];
7723 } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) &&
7724 ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
7725 TXDDS_MFG_SZ)) {
7726 idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ);
7727 pr_info("IB%u:%u use idx %u into txdds_mfg\n",
7728 ppd->dd->unit, ppd->port, idx);
7729 *sdr_dds = &txdds_extra_mfg[idx];
7730 *ddr_dds = &txdds_extra_mfg[idx];
7731 *qdr_dds = &txdds_extra_mfg[idx];
7732 } else {
7733 /* this shouldn't happen, it's range checked */
7734 *sdr_dds = txdds_sdr + qib_long_atten;
7735 *ddr_dds = txdds_ddr + qib_long_atten;
7736 *qdr_dds = txdds_qdr + qib_long_atten;
7737 }
7738 }
7739
7740 static void init_txdds_table(struct qib_pportdata *ppd, int override)
7741 {
7742 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
7743 struct txdds_ent *dds;
7744 int idx;
7745 int single_ent = 0;
7746
7747 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
7748
7749 /* for mez cards or override, use the selected value for all entries */
7750 if (!(ppd->dd->flags & QIB_HAS_QSFP) || override)
7751 single_ent = 1;
7752
7753 /* Fill in the first entry with the best entry found. */
7754 set_txdds(ppd, 0, sdr_dds);
7755 set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds);
7756 set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds);
7757 if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
7758 QIBL_LINKACTIVE)) {
7759 dds = (struct txdds_ent *)(ppd->link_speed_active ==
7760 QIB_IB_QDR ? qdr_dds :
7761 (ppd->link_speed_active ==
7762 QIB_IB_DDR ? ddr_dds : sdr_dds));
7763 write_tx_serdes_param(ppd, dds);
7764 }
7765
7766 /* Fill in the remaining entries with the default table values. */
7767 for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) {
7768 set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx);
7769 set_txdds(ppd, idx + TXDDS_TABLE_SZ,
7770 single_ent ? ddr_dds : txdds_ddr + idx);
7771 set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ,
7772 single_ent ? qdr_dds : txdds_qdr + idx);
7773 }
7774 }
7775
7776 #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl)
7777 #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg)
7778 #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy)
7779 #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address)
7780 #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data)
7781 #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read)
7782 #define AHB_TRANS_TRIES 10
7783
7784 /*
7785 * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4,
7786 * 5=subsystem which is why most calls have "chan + chan >> 1"
7787 * for the channel argument.
7788 */
7789 static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr,
7790 u32 data, u32 mask)
7791 {
7792 u32 rd_data, wr_data, sz_mask;
7793 u64 trans, acc, prev_acc;
7794 u32 ret = 0xBAD0BAD;
7795 int tries;
7796
7797 prev_acc = qib_read_kreg64(dd, KR_AHB_ACC);
7798 /* From this point on, make sure we return access */
7799 acc = (quad << 1) | 1;
7800 qib_write_kreg(dd, KR_AHB_ACC, acc);
7801
7802 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
7803 trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7804 if (trans & AHB_TRANS_RDY)
7805 break;
7806 }
7807 if (tries >= AHB_TRANS_TRIES) {
7808 qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES);
7809 goto bail;
7810 }
7811
7812 /* If mask is not all 1s, we need to read, but different SerDes
7813 * entities have different sizes
7814 */
7815 sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1;
7816 wr_data = data & mask & sz_mask;
7817 if ((~mask & sz_mask) != 0) {
7818 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1);
7819 qib_write_kreg(dd, KR_AHB_TRANS, trans);
7820
7821 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
7822 trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7823 if (trans & AHB_TRANS_RDY)
7824 break;
7825 }
7826 if (tries >= AHB_TRANS_TRIES) {
7827 qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n",
7828 AHB_TRANS_TRIES);
7829 goto bail;
7830 }
7831 /* Re-read in case host split reads and read data first */
7832 trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7833 rd_data = (uint32_t)(trans >> AHB_DATA_LSB);
7834 wr_data |= (rd_data & ~mask & sz_mask);
7835 }
7836
7837 /* If mask is not zero, we need to write. */
7838 if (mask & sz_mask) {
7839 trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1);
7840 trans |= ((uint64_t)wr_data << AHB_DATA_LSB);
7841 trans |= AHB_WR;
7842 qib_write_kreg(dd, KR_AHB_TRANS, trans);
7843
7844 for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) {
7845 trans = qib_read_kreg64(dd, KR_AHB_TRANS);
7846 if (trans & AHB_TRANS_RDY)
7847 break;
7848 }
7849 if (tries >= AHB_TRANS_TRIES) {
7850 qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n",
7851 AHB_TRANS_TRIES);
7852 goto bail;
7853 }
7854 }
7855 ret = wr_data;
7856 bail:
7857 qib_write_kreg(dd, KR_AHB_ACC, prev_acc);
7858 return ret;
7859 }
7860
7861 static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data,
7862 unsigned mask)
7863 {
7864 struct qib_devdata *dd = ppd->dd;
7865 int chan;
7866 u32 rbc;
7867
7868 for (chan = 0; chan < SERDES_CHANS; ++chan) {
7869 ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr,
7870 data, mask);
7871 rbc = ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
7872 addr, 0, 0);
7873 }
7874 }
7875
7876 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable)
7877 {
7878 u64 data = qib_read_kreg_port(ppd, krp_serdesctrl);
7879 u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
7880
7881 if (enable && !state) {
7882 pr_info("IB%u:%u Turning LOS on\n",
7883 ppd->dd->unit, ppd->port);
7884 data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
7885 } else if (!enable && state) {
7886 pr_info("IB%u:%u Turning LOS off\n",
7887 ppd->dd->unit, ppd->port);
7888 data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
7889 }
7890 qib_write_kreg_port(ppd, krp_serdesctrl, data);
7891 }
7892
7893 static int serdes_7322_init(struct qib_pportdata *ppd)
7894 {
7895 int ret = 0;
7896 if (ppd->dd->cspec->r1)
7897 ret = serdes_7322_init_old(ppd);
7898 else
7899 ret = serdes_7322_init_new(ppd);
7900 return ret;
7901 }
7902
7903 static int serdes_7322_init_old(struct qib_pportdata *ppd)
7904 {
7905 u32 le_val;
7906
7907 /*
7908 * Initialize the Tx DDS tables. Also done every QSFP event,
7909 * for adapters with QSFP
7910 */
7911 init_txdds_table(ppd, 0);
7912
7913 /* ensure no tx overrides from earlier driver loads */
7914 qib_write_kreg_port(ppd, krp_tx_deemph_override,
7915 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
7916 reset_tx_deemphasis_override));
7917
7918 /* Patch some SerDes defaults to "Better for IB" */
7919 /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */
7920 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
7921
7922 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */
7923 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11));
7924 /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */
7925 ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6));
7926
7927 /* May be overridden in qsfp_7322_event */
7928 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT;
7929 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7));
7930
7931 /* enable LE1 adaptation for all but QME, which is disabled */
7932 le_val = IS_QME(ppd->dd) ? 0 : 1;
7933 ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5));
7934
7935 /* Clear cmode-override, may be set from older driver */
7936 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14);
7937
7938 /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */
7939 ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8));
7940
7941 /* setup LoS params; these are subsystem, so chan == 5 */
7942 /* LoS filter threshold_count on, ch 0-3, set to 8 */
7943 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11));
7944 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4));
7945 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11));
7946 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4));
7947
7948 /* LoS filter threshold_count off, ch 0-3, set to 4 */
7949 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0));
7950 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8));
7951 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0));
7952 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8));
7953
7954 /* LoS filter select enabled */
7955 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15);
7956
7957 /* LoS target data: SDR=4, DDR=2, QDR=1 */
7958 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */
7959 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */
7960 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */
7961
7962 serdes_7322_los_enable(ppd, 1);
7963
7964 /* rxbistena; set 0 to avoid effects of it switch later */
7965 ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15);
7966
7967 /* Configure 4 DFE taps, and only they adapt */
7968 ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0));
7969
7970 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */
7971 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac;
7972 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe);
7973
7974 /*
7975 * Set receive adaptation mode. SDR and DDR adaptation are
7976 * always on, and QDR is initially enabled; later disabled.
7977 */
7978 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL);
7979 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL);
7980 qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
7981 ppd->dd->cspec->r1 ?
7982 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
7983 ppd->cpspec->qdr_dfe_on = 1;
7984
7985 /* FLoop LOS gate: PPM filter enabled */
7986 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
7987
7988 /* rx offset center enabled */
7989 ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4);
7990
7991 if (!ppd->dd->cspec->r1) {
7992 ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12);
7993 ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8);
7994 }
7995
7996 /* Set the frequency loop bandwidth to 15 */
7997 ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5));
7998
7999 return 0;
8000 }
8001
8002 static int serdes_7322_init_new(struct qib_pportdata *ppd)
8003 {
8004 unsigned long tend;
8005 u32 le_val, rxcaldone;
8006 int chan, chan_done = (1 << SERDES_CHANS) - 1;
8007
8008 /* Clear cmode-override, may be set from older driver */
8009 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14);
8010
8011 /* ensure no tx overrides from earlier driver loads */
8012 qib_write_kreg_port(ppd, krp_tx_deemph_override,
8013 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8014 reset_tx_deemphasis_override));
8015
8016 /* START OF LSI SUGGESTED SERDES BRINGUP */
8017 /* Reset - Calibration Setup */
8018 /* Stop DFE adaptaion */
8019 ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1));
8020 /* Disable LE1 */
8021 ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5));
8022 /* Disable autoadapt for LE1 */
8023 ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15));
8024 /* Disable LE2 */
8025 ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6));
8026 /* Disable VGA */
8027 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0));
8028 /* Disable AFE Offset Cancel */
8029 ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12));
8030 /* Disable Timing Loop */
8031 ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3));
8032 /* Disable Frequency Loop */
8033 ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4));
8034 /* Disable Baseline Wander Correction */
8035 ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13));
8036 /* Disable RX Calibration */
8037 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10));
8038 /* Disable RX Offset Calibration */
8039 ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4));
8040 /* Select BB CDR */
8041 ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15));
8042 /* CDR Step Size */
8043 ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8));
8044 /* Enable phase Calibration */
8045 ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5));
8046 /* DFE Bandwidth [2:14-12] */
8047 ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12));
8048 /* DFE Config (4 taps only) */
8049 ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0));
8050 /* Gain Loop Bandwidth */
8051 if (!ppd->dd->cspec->r1) {
8052 ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12));
8053 ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8));
8054 } else {
8055 ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11));
8056 }
8057 /* Baseline Wander Correction Gain [13:4-0] (leave as default) */
8058 /* Baseline Wander Correction Gain [3:7-5] (leave as default) */
8059 /* Data Rate Select [5:7-6] (leave as default) */
8060 /* RX Parallel Word Width [3:10-8] (leave as default) */
8061
8062 /* RX REST */
8063 /* Single- or Multi-channel reset */
8064 /* RX Analog reset */
8065 /* RX Digital reset */
8066 ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13));
8067 msleep(20);
8068 /* RX Analog reset */
8069 ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14));
8070 msleep(20);
8071 /* RX Digital reset */
8072 ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13));
8073 msleep(20);
8074
8075 /* setup LoS params; these are subsystem, so chan == 5 */
8076 /* LoS filter threshold_count on, ch 0-3, set to 8 */
8077 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11));
8078 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4));
8079 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11));
8080 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4));
8081
8082 /* LoS filter threshold_count off, ch 0-3, set to 4 */
8083 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0));
8084 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8));
8085 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0));
8086 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8));
8087
8088 /* LoS filter select enabled */
8089 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15);
8090
8091 /* LoS target data: SDR=4, DDR=2, QDR=1 */
8092 ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */
8093 ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */
8094 ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */
8095
8096 /* Turn on LOS on initial SERDES init */
8097 serdes_7322_los_enable(ppd, 1);
8098 /* FLoop LOS gate: PPM filter enabled */
8099 ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
8100
8101 /* RX LATCH CALIBRATION */
8102 /* Enable Eyefinder Phase Calibration latch */
8103 ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0));
8104 /* Enable RX Offset Calibration latch */
8105 ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4));
8106 msleep(20);
8107 /* Start Calibration */
8108 ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10));
8109 tend = jiffies + msecs_to_jiffies(500);
8110 while (chan_done && !time_is_before_jiffies(tend)) {
8111 msleep(20);
8112 for (chan = 0; chan < SERDES_CHANS; ++chan) {
8113 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
8114 (chan + (chan >> 1)),
8115 25, 0, 0);
8116 if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 &&
8117 (~chan_done & (1 << chan)) == 0)
8118 chan_done &= ~(1 << chan);
8119 }
8120 }
8121 if (chan_done) {
8122 pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n",
8123 IBSD(ppd->hw_pidx), chan_done);
8124 } else {
8125 for (chan = 0; chan < SERDES_CHANS; ++chan) {
8126 rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
8127 (chan + (chan >> 1)),
8128 25, 0, 0);
8129 if ((~rxcaldone & (u32)BMASK(10, 10)) == 0)
8130 pr_info("Serdes %d chan %d calibration failed\n",
8131 IBSD(ppd->hw_pidx), chan);
8132 }
8133 }
8134
8135 /* Turn off Calibration */
8136 ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10));
8137 msleep(20);
8138
8139 /* BRING RX UP */
8140 /* Set LE2 value (May be overridden in qsfp_7322_event) */
8141 le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT;
8142 ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7));
8143 /* Set LE2 Loop bandwidth */
8144 ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5));
8145 /* Enable LE2 */
8146 ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6));
8147 msleep(20);
8148 /* Enable H0 only */
8149 ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1));
8150 /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */
8151 le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac;
8152 ibsd_wr_allchans(ppd, 21, le_val, 0xfffe);
8153 /* Enable VGA */
8154 ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0));
8155 msleep(20);
8156 /* Set Frequency Loop Bandwidth */
8157 ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5));
8158 /* Enable Frequency Loop */
8159 ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4));
8160 /* Set Timing Loop Bandwidth */
8161 ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
8162 /* Enable Timing Loop */
8163 ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3));
8164 msleep(50);
8165 /* Enable DFE
8166 * Set receive adaptation mode. SDR and DDR adaptation are
8167 * always on, and QDR is initially enabled; later disabled.
8168 */
8169 qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL);
8170 qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL);
8171 qib_write_kreg_port(ppd, krp_static_adapt_dis(2),
8172 ppd->dd->cspec->r1 ?
8173 QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
8174 ppd->cpspec->qdr_dfe_on = 1;
8175 /* Disable LE1 */
8176 ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5));
8177 /* Disable auto adapt for LE1 */
8178 ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15));
8179 msleep(20);
8180 /* Enable AFE Offset Cancel */
8181 ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12));
8182 /* Enable Baseline Wander Correction */
8183 ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13));
8184 /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */
8185 ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11));
8186 /* VGA output common mode */
8187 ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2));
8188
8189 /*
8190 * Initialize the Tx DDS tables. Also done every QSFP event,
8191 * for adapters with QSFP
8192 */
8193 init_txdds_table(ppd, 0);
8194
8195 return 0;
8196 }
8197
8198 /* start adjust QMH serdes parameters */
8199
8200 static void set_man_code(struct qib_pportdata *ppd, int chan, int code)
8201 {
8202 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8203 9, code << 9, 0x3f << 9);
8204 }
8205
8206 static void set_man_mode_h1(struct qib_pportdata *ppd, int chan,
8207 int enable, u32 tapenable)
8208 {
8209 if (enable)
8210 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8211 1, 3 << 10, 0x1f << 10);
8212 else
8213 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8214 1, 0, 0x1f << 10);
8215 }
8216
8217 /* Set clock to 1, 0, 1, 0 */
8218 static void clock_man(struct qib_pportdata *ppd, int chan)
8219 {
8220 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8221 4, 0x4000, 0x4000);
8222 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8223 4, 0, 0x4000);
8224 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8225 4, 0x4000, 0x4000);
8226 ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)),
8227 4, 0, 0x4000);
8228 }
8229
8230 /*
8231 * write the current Tx serdes pre,post,main,amp settings into the serdes.
8232 * The caller must pass the settings appropriate for the current speed,
8233 * or not care if they are correct for the current speed.
8234 */
8235 static void write_tx_serdes_param(struct qib_pportdata *ppd,
8236 struct txdds_ent *txdds)
8237 {
8238 u64 deemph;
8239
8240 deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override);
8241 /* field names for amp, main, post, pre, respectively */
8242 deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) |
8243 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) |
8244 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) |
8245 SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena));
8246
8247 deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8248 tx_override_deemphasis_select);
8249 deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8250 txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8251 txampcntl_d2a);
8252 deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8253 txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8254 txc0_ena);
8255 deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8256 txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8257 txcp1_ena);
8258 deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8259 txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
8260 txcn1_ena);
8261 qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph);
8262 }
8263
8264 /*
8265 * Set the parameters for mez cards on link bounce, so they are
8266 * always exactly what was requested. Similar logic to init_txdds
8267 * but does just the serdes.
8268 */
8269 static void adj_tx_serdes(struct qib_pportdata *ppd)
8270 {
8271 const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
8272 struct txdds_ent *dds;
8273
8274 find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1);
8275 dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
8276 qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ?
8277 ddr_dds : sdr_dds));
8278 write_tx_serdes_param(ppd, dds);
8279 }
8280
8281 /* set QDR forced value for H1, if needed */
8282 static void force_h1(struct qib_pportdata *ppd)
8283 {
8284 int chan;
8285
8286 ppd->cpspec->qdr_reforce = 0;
8287 if (!ppd->dd->cspec->r1)
8288 return;
8289
8290 for (chan = 0; chan < SERDES_CHANS; chan++) {
8291 set_man_mode_h1(ppd, chan, 1, 0);
8292 set_man_code(ppd, chan, ppd->cpspec->h1_val);
8293 clock_man(ppd, chan);
8294 set_man_mode_h1(ppd, chan, 0, 0);
8295 }
8296 }
8297
8298 #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN)
8299 #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en)
8300
8301 #define R_OPCODE_LSB 3
8302 #define R_OP_NOP 0
8303 #define R_OP_SHIFT 2
8304 #define R_OP_UPDATE 3
8305 #define R_TDI_LSB 2
8306 #define R_TDO_LSB 1
8307 #define R_RDY 1
8308
8309 static int qib_r_grab(struct qib_devdata *dd)
8310 {
8311 u64 val;
8312 val = SJA_EN;
8313 qib_write_kreg(dd, kr_r_access, val);
8314 qib_read_kreg32(dd, kr_scratch);
8315 return 0;
8316 }
8317
8318 /* qib_r_wait_for_rdy() not only waits for the ready bit, it
8319 * returns the current state of R_TDO
8320 */
8321 static int qib_r_wait_for_rdy(struct qib_devdata *dd)
8322 {
8323 u64 val;
8324 int timeout;
8325 for (timeout = 0; timeout < 100 ; ++timeout) {
8326 val = qib_read_kreg32(dd, kr_r_access);
8327 if (val & R_RDY)
8328 return (val >> R_TDO_LSB) & 1;
8329 }
8330 return -1;
8331 }
8332
8333 static int qib_r_shift(struct qib_devdata *dd, int bisten,
8334 int len, u8 *inp, u8 *outp)
8335 {
8336 u64 valbase, val;
8337 int ret, pos;
8338
8339 valbase = SJA_EN | (bisten << BISTEN_LSB) |
8340 (R_OP_SHIFT << R_OPCODE_LSB);
8341 ret = qib_r_wait_for_rdy(dd);
8342 if (ret < 0)
8343 goto bail;
8344 for (pos = 0; pos < len; ++pos) {
8345 val = valbase;
8346 if (outp) {
8347 outp[pos >> 3] &= ~(1 << (pos & 7));
8348 outp[pos >> 3] |= (ret << (pos & 7));
8349 }
8350 if (inp) {
8351 int tdi = inp[pos >> 3] >> (pos & 7);
8352 val |= ((tdi & 1) << R_TDI_LSB);
8353 }
8354 qib_write_kreg(dd, kr_r_access, val);
8355 qib_read_kreg32(dd, kr_scratch);
8356 ret = qib_r_wait_for_rdy(dd);
8357 if (ret < 0)
8358 break;
8359 }
8360 /* Restore to NOP between operations. */
8361 val = SJA_EN | (bisten << BISTEN_LSB);
8362 qib_write_kreg(dd, kr_r_access, val);
8363 qib_read_kreg32(dd, kr_scratch);
8364 ret = qib_r_wait_for_rdy(dd);
8365
8366 if (ret >= 0)
8367 ret = pos;
8368 bail:
8369 return ret;
8370 }
8371
8372 static int qib_r_update(struct qib_devdata *dd, int bisten)
8373 {
8374 u64 val;
8375 int ret;
8376
8377 val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB);
8378 ret = qib_r_wait_for_rdy(dd);
8379 if (ret >= 0) {
8380 qib_write_kreg(dd, kr_r_access, val);
8381 qib_read_kreg32(dd, kr_scratch);
8382 }
8383 return ret;
8384 }
8385
8386 #define BISTEN_PORT_SEL 15
8387 #define LEN_PORT_SEL 625
8388 #define BISTEN_AT 17
8389 #define LEN_AT 156
8390 #define BISTEN_ETM 16
8391 #define LEN_ETM 632
8392
8393 #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE)
8394
8395 /* these are common for all IB port use cases. */
8396 static u8 reset_at[BIT2BYTE(LEN_AT)] = {
8397 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8398 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
8399 };
8400 static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = {
8401 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8402 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8403 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e,
8404 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7,
8405 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70,
8406 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00,
8407 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8408 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00,
8409 };
8410 static u8 at[BIT2BYTE(LEN_AT)] = {
8411 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00,
8412 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
8413 };
8414
8415 /* used for IB1 or IB2, only one in use */
8416 static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = {
8417 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8418 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8419 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8420 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00,
8421 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8422 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03,
8423 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00,
8424 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00,
8425 };
8426
8427 /* used when both IB1 and IB2 are in use */
8428 static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = {
8429 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8430 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79,
8431 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
8432 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05,
8433 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
8434 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07,
8435 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00,
8436 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00,
8437 };
8438
8439 /* used when only IB1 is in use */
8440 static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = {
8441 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13,
8442 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c,
8443 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8444 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8445 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32,
8446 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
8447 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
8448 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
8449 };
8450
8451 /* used when only IB2 is in use */
8452 static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = {
8453 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39,
8454 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32,
8455 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
8456 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39,
8457 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32,
8458 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a,
8459 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a,
8460 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
8461 };
8462
8463 /* used when both IB1 and IB2 are in use */
8464 static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = {
8465 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13,
8466 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c,
8467 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8468 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13,
8469 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32,
8470 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a,
8471 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,
8472 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
8473 };
8474
8475 /*
8476 * Do setup to properly handle IB link recovery; if port is zero, we
8477 * are initializing to cover both ports; otherwise we are initializing
8478 * to cover a single port card, or the port has reached INIT and we may
8479 * need to switch coverage types.
8480 */
8481 static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both)
8482 {
8483 u8 *portsel, *etm;
8484 struct qib_devdata *dd = ppd->dd;
8485
8486 if (!ppd->dd->cspec->r1)
8487 return;
8488 if (!both) {
8489 dd->cspec->recovery_ports_initted++;
8490 ppd->cpspec->recovery_init = 1;
8491 }
8492 if (!both && dd->cspec->recovery_ports_initted == 1) {
8493 portsel = ppd->port == 1 ? portsel_port1 : portsel_port2;
8494 etm = atetm_1port;
8495 } else {
8496 portsel = portsel_2port;
8497 etm = atetm_2port;
8498 }
8499
8500 if (qib_r_grab(dd) < 0 ||
8501 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 ||
8502 qib_r_update(dd, BISTEN_ETM) < 0 ||
8503 qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 ||
8504 qib_r_update(dd, BISTEN_AT) < 0 ||
8505 qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL,
8506 portsel, NULL) < 0 ||
8507 qib_r_update(dd, BISTEN_PORT_SEL) < 0 ||
8508 qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 ||
8509 qib_r_update(dd, BISTEN_AT) < 0 ||
8510 qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 ||
8511 qib_r_update(dd, BISTEN_ETM) < 0)
8512 qib_dev_err(dd, "Failed IB link recovery setup\n");
8513 }
8514
8515 static void check_7322_rxe_status(struct qib_pportdata *ppd)
8516 {
8517 struct qib_devdata *dd = ppd->dd;
8518 u64 fmask;
8519
8520 if (dd->cspec->recovery_ports_initted != 1)
8521 return; /* rest doesn't apply to dualport */
8522 qib_write_kreg(dd, kr_control, dd->control |
8523 SYM_MASK(Control, FreezeMode));
8524 (void)qib_read_kreg64(dd, kr_scratch);
8525 udelay(3); /* ibcreset asserted 400ns, be sure that's over */
8526 fmask = qib_read_kreg64(dd, kr_act_fmask);
8527 if (!fmask) {
8528 /*
8529 * require a powercycle before we'll work again, and make
8530 * sure we get no more interrupts, and don't turn off
8531 * freeze.
8532 */
8533 ppd->dd->cspec->stay_in_freeze = 1;
8534 qib_7322_set_intr_state(ppd->dd, 0);
8535 qib_write_kreg(dd, kr_fmask, 0ULL);
8536 qib_dev_err(dd, "HCA unusable until powercycled\n");
8537 return; /* eventually reset */
8538 }
8539
8540 qib_write_kreg(ppd->dd, kr_hwerrclear,
8541 SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1));
8542
8543 /* don't do the full clear_freeze(), not needed for this */
8544 qib_write_kreg(dd, kr_control, dd->control);
8545 qib_read_kreg32(dd, kr_scratch);
8546 /* take IBC out of reset */
8547 if (ppd->link_speed_supported) {
8548 ppd->cpspec->ibcctrl_a &=
8549 ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn);
8550 qib_write_kreg_port(ppd, krp_ibcctrl_a,
8551 ppd->cpspec->ibcctrl_a);
8552 qib_read_kreg32(dd, kr_scratch);
8553 if (ppd->lflags & QIBL_IB_LINK_DISABLED)
8554 qib_set_ib_7322_lstate(ppd, 0,
8555 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
8556 }
8557 }
Linux kernel - Deliverables
This page took 0.236613 seconds and 5 git commands to generate.