drivers/input/keyboard/Kconfig

   1 #
   2 # Input core configuration
   3 #
   4 menuconfig INPUT_KEYBOARD
   5         bool "Keyboards" if EMBEDDED || !X86
   6         default y
   7         help
   8           Say Y here, and a list of supported keyboards will be displayed.
   9           This option doesn't affect the kernel.
  10
  11           If unsure, say Y.
  12
  13 if INPUT_KEYBOARD
  14
  15 config KEYBOARD_AAED2000
  16         tristate "AAED-2000 keyboard"
  17         depends on MACH_AAED2000
  18         select INPUT_POLLDEV
  19         default y
  20         help
  21           Say Y here to enable the keyboard on the Agilent AAED-2000
  22           development board.
  23
  24           To compile this driver as a module, choose M here: the
  25           module will be called aaed2000_kbd.
  26
  27 config KEYBOARD_ADP5520
  28         tristate "Keypad Support for ADP5520 PMIC"
  29         depends on PMIC_ADP5520
  30         help
  31           This option enables support for the keypad scan matrix
  32           on Analog Devices ADP5520 PMICs.
  33
  34           To compile this driver as a module, choose M here: the module will
  35           be called adp5520-keys.
  36
  37 config KEYBOARD_ADP5588
  38         tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
  39         depends on I2C
  40         help
  41           Say Y here if you want to use a ADP5588/87 attached to your
  42           system I2C bus.
  43
  44           To compile this driver as a module, choose M here: the
  45           module will be called adp5588-keys.
  46
  47 config KEYBOARD_AMIGA
  48         tristate "Amiga keyboard"
  49         depends on AMIGA
  50         help
  51           Say Y here if you are running Linux on any AMIGA and have a keyboard
  52           attached.
  53
  54           To compile this driver as a module, choose M here: the
  55           module will be called amikbd.
  56
  57 config ATARI_KBD_CORE
  58         bool
  59
  60 config KEYBOARD_ATARI
  61         tristate "Atari keyboard"
  62         depends on ATARI
  63         select ATARI_KBD_CORE
  64         help
  65           Say Y here if you are running Linux on any Atari and have a keyboard
  66           attached.
  67
  68           To compile this driver as a module, choose M here: the
  69           module will be called atakbd.
  70
  71 config KEYBOARD_ATKBD
  72         tristate "AT keyboard" if EMBEDDED || !X86
  73         default y
  74         select SERIO
  75         select SERIO_LIBPS2
  76         select SERIO_I8042 if X86
  77         select SERIO_GSCPS2 if GSC
  78         help
  79           Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
  80           you'll need this, unless you have a different type keyboard (USB, ADB
  81           or other). This also works for AT and PS/2 keyboards connected over a
  82           PS/2 to serial converter.
  83
  84           If unsure, say Y.
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called atkbd.
  88
  89 config KEYBOARD_ATKBD_HP_KEYCODES
  90         bool "Use HP keyboard scancodes"
  91         depends on PARISC && KEYBOARD_ATKBD
  92         default y
  93         help
  94           Say Y here if you have a PA-RISC machine and want to use an AT or
  95           PS/2 keyboard, and your keyboard uses keycodes that are specific to
  96           PA-RISC keyboards.
  97
  98           Say N if you use a standard keyboard.
  99
 100 config KEYBOARD_ATKBD_RDI_KEYCODES
 101         bool "Use PrecisionBook keyboard scancodes"
 102         depends on KEYBOARD_ATKBD_HP_KEYCODES
 103         default n
 104         help
 105           If you have an RDI PrecisionBook, say Y here if you want to use its
 106           built-in keyboard (as opposed to an external keyboard).
 107
 108           The PrecisionBook has five keys that conflict with those used by most
 109           AT and PS/2 keyboards. These are as follows:
 110
 111             PrecisionBook    Standard AT or PS/2
 112
 113             F1               F12
 114             Left Ctrl        Left Alt
 115             Caps Lock        Left Ctrl
 116             Right Ctrl       Caps Lock
 117             Left             102nd key (the key to the right of Left Shift)
 118
 119           If you say N here, and use the PrecisionBook keyboard, then each key
 120           in the left-hand column will be interpreted as the corresponding key
 121           in the right-hand column.
 122
 123           If you say Y here, and use an external keyboard, then each key in the
 124           right-hand column will be interpreted as the key shown in the
 125           left-hand column.
 126
 127 config QT2160
 128         tristate "Atmel AT42QT2160 Touch Sensor Chip"
 129         depends on I2C && EXPERIMENTAL
 130         help
 131           If you say yes here you get support for Atmel AT42QT2160 Touch
 132           Sensor chip as a keyboard input.
 133
 134           This driver can also be built as a module. If so, the module
 135           will be called qt2160.
 136
 137 config KEYBOARD_BFIN
 138         tristate "Blackfin BF54x keypad support"
 139         depends on (BF54x && !BF544)
 140         help
 141           Say Y here if you want to use the BF54x keypad.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called bf54x-keys.
 145
 146 config KEYBOARD_LKKBD
 147         tristate "DECstation/VAXstation LK201/LK401 keyboard"
 148         select SERIO
 149         help
 150           Say Y here if you want to use a LK201 or LK401 style serial
 151           keyboard. This keyboard is also useable on PCs if you attach
 152           it with the inputattach program. The connector pinout is
 153           described within lkkbd.c.
 154
 155           To compile this driver as a module, choose M here: the
 156           module will be called lkkbd.
 157
 158 config KEYBOARD_EP93XX
 159         tristate "EP93xx Matrix Keypad support"
 160         depends on ARCH_EP93XX
 161         help
 162           Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called ep93xx_keypad.
 166
 167 config KEYBOARD_GPIO
 168         tristate "GPIO Buttons"
 169         depends on GENERIC_GPIO
 170         help
 171           This driver implements support for buttons connected
 172           to GPIO pins of various CPUs (and some other chips).
 173
 174           Say Y here if your device has buttons connected
 175           directly to such GPIO pins.  Your board-specific
 176           setup logic must also provide a platform device,
 177           with configuration data saying which GPIOs are used.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called gpio_keys.
 181
 182 config KEYBOARD_TCA6416
 183         tristate "TCA6416 Keypad Support"
 184         depends on I2C
 185         help
 186           This driver implements basic keypad functionality
 187           for keys connected through TCA6416 IO expander
 188
 189           Say Y here if your device has keys connected to
 190           TCA6416 IO expander. Your board-specific setup logic
 191           must also provide pin-mask details(of which TCA6416 pins
 192           are used for keypad).
 193
 194           If enabled the complete TCA6416 device will be managed through
 195           this driver.
 196
 197
 198 config KEYBOARD_MATRIX
 199         tristate "GPIO driven matrix keypad support"
 200         depends on GENERIC_GPIO
 201         help
 202           Enable support for GPIO driven matrix keypad.
 203
 204           To compile this driver as a module, choose M here: the
 205           module will be called matrix_keypad.
 206
 207 config KEYBOARD_HIL_OLD
 208         tristate "HP HIL keyboard support (simple driver)"
 209         depends on GSC || HP300
 210         default y
 211         help
 212           The "Human Interface Loop" is a older, 8-channel USB-like
 213           controller used in several Hewlett Packard models. This driver
 214           was adapted from the one written for m68k/hp300, and implements
 215           support for a keyboard attached to the HIL port, but not for
 216           any other types of HIL input devices like mice or tablets.
 217           However, it has been thoroughly tested and is stable.
 218
 219           If you want full HIL support including support for multiple
 220           keyboards, mice, and tablets, you have to enable the
 221           "HP System Device Controller i8042 Support" in the input/serio
 222           submenu.
 223
 224 config KEYBOARD_HIL
 225         tristate "HP HIL keyboard/pointer support"
 226         depends on GSC || HP300
 227         default y
 228         select HP_SDC
 229         select HIL_MLC
 230         select SERIO
 231         help
 232           The "Human Interface Loop" is a older, 8-channel USB-like
 233           controller used in several Hewlett Packard models.
 234           This driver implements support for HIL-keyboards and pointing
 235           devices (mice, tablets, touchscreens) attached
 236           to your machine, so normally you should say Y here.
 237
 238 config KEYBOARD_HP6XX
 239         tristate "HP Jornada 6xx keyboard"
 240         depends on SH_HP6XX
 241         select INPUT_POLLDEV
 242         help
 243           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 244           support the built-in keyboard.
 245
 246           To compile this driver as a module, choose M here: the
 247           module will be called jornada680_kbd.
 248
 249 config KEYBOARD_HP7XX
 250         tristate "HP Jornada 7xx keyboard"
 251         depends on SA1100_JORNADA720_SSP && SA1100_SSP
 252         help
 253           Say Y here if you have a HP Jornada 710/720/728 and want to
 254           support the built-in keyboard.
 255
 256           To compile this driver as a module, choose M here: the
 257           module will be called jornada720_kbd.
 258
 259 config KEYBOARD_LM8323
 260         tristate "LM8323 keypad chip"
 261         depends on I2C
 262         depends on LEDS_CLASS
 263         help
 264           If you say yes here you get support for the National Semiconductor
 265           LM8323 keypad controller.
 266
 267           To compile this driver as a module, choose M here: the
 268           module will be called lm8323.
 269
 270 config KEYBOARD_LOCOMO
 271         tristate "LoCoMo Keyboard Support"
 272         depends on SHARP_LOCOMO
 273         help
 274           Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 275
 276           To compile this driver as a module, choose M here: the
 277           module will be called locomokbd.
 278
 279 config KEYBOARD_MAPLE
 280         tristate "Maple bus keyboard"
 281         depends on SH_DREAMCAST && MAPLE
 282         help
 283           Say Y here if you have a Dreamcast console running Linux and have
 284           a keyboard attached to its Maple bus.
 285
 286           To compile this driver as a module, choose M here: the
 287           module will be called maple_keyb.
 288
 289 config KEYBOARD_MAX7359
 290         tristate "Maxim MAX7359 Key Switch Controller"
 291         depends on I2C
 292         help
 293           If you say yes here you get support for the Maxim MAX7359 Key
 294           Switch Controller chip. This providers microprocessors with
 295           management of up to 64 key switches
 296
 297           To compile this driver as a module, choose M here: the
 298           module will be called max7359_keypad.
 299
 300 config KEYBOARD_IMX
 301         tristate "IMX keypad support"
 302         depends on ARCH_MXC
 303         help
 304           Enable support for IMX keypad port.
 305
 306           To compile this driver as a module, choose M here: the
 307           module will be called imx_keypad.
 308
 309 config KEYBOARD_NEWTON
 310         tristate "Newton keyboard"
 311         select SERIO
 312         help
 313           Say Y here if you have a Newton keyboard on a serial port.
 314
 315           To compile this driver as a module, choose M here: the
 316           module will be called newtonkbd.
 317
 318 config KEYBOARD_OPENCORES
 319         tristate "OpenCores Keyboard Controller"
 320         help
 321           Say Y here if you want to use the OpenCores Keyboard Controller
 322           http://www.opencores.org/project,keyboardcontroller
 323
 324           To compile this driver as a module, choose M here; the
 325           module will be called opencores-kbd.
 326
 327 config KEYBOARD_PXA27x
 328         tristate "PXA27x/PXA3xx keypad support"
 329         depends on PXA27x || PXA3xx
 330         help
 331           Enable support for PXA27x/PXA3xx keypad controller.
 332
 333           To compile this driver as a module, choose M here: the
 334           module will be called pxa27x_keypad.
 335
 336 config KEYBOARD_PXA930_ROTARY
 337         tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
 338         depends on CPU_PXA930 || CPU_PXA935
 339         help
 340           Enable support for PXA930/PXA935 Enhanced Rotary Controller.
 341
 342           To compile this driver as a module, choose M here: the
 343           module will be called pxa930_rotary.
 344
 345 config KEYBOARD_STOWAWAY
 346         tristate "Stowaway keyboard"
 347         select SERIO
 348         help
 349           Say Y here if you have a Stowaway keyboard on a serial port.
 350           Stowaway compatible keyboards like Dicota Input-PDA keyboard
 351           are also supported by this driver.
 352
 353           To compile this driver as a module, choose M here: the
 354           module will be called stowaway.
 355
 356 config KEYBOARD_SUNKBD
 357         tristate "Sun Type 4 and Type 5 keyboard"
 358         select SERIO
 359         help
 360           Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
 361           connected either to the Sun keyboard connector or to an serial
 362           (RS-232) port via a simple adapter.
 363
 364           To compile this driver as a module, choose M here: the
 365           module will be called sunkbd.
 366
 367 config KEYBOARD_SH_KEYSC
 368         tristate "SuperH KEYSC keypad support"
 369         depends on SUPERH || ARCH_SHMOBILE
 370         help
 371           Say Y here if you want to use a keypad attached to the KEYSC block
 372           on SuperH processors such as sh7722 and sh7343.
 373
 374           To compile this driver as a module, choose M here: the
 375           module will be called sh_keysc.
 376
 377 config KEYBOARD_DAVINCI
 378         tristate "TI DaVinci Key Scan"
 379         depends on ARCH_DAVINCI_DM365
 380         help
 381           Say Y to enable keypad module support for the TI DaVinci
 382           platforms (DM365).
 383
 384           To compile this driver as a module, choose M here: the
 385           module will be called davinci_keyscan.
 386
 387 config KEYBOARD_OMAP
 388         tristate "TI OMAP keypad support"
 389         depends on (ARCH_OMAP1 || ARCH_OMAP2)
 390         help
 391           Say Y here if you want to use the OMAP keypad.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called omap-keypad.
 395
 396 config KEYBOARD_TWL4030
 397         tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 398         depends on TWL4030_CORE
 399         help
 400           Say Y here if your board use the keypad controller on
 401           TWL4030 family chips.  It's safe to say enable this
 402           even on boards that don't use the keypad controller.
 403
 404           To compile this driver as a module, choose M here: the
 405           module will be called twl4030_keypad.
 406
 407 config KEYBOARD_XTKBD
 408         tristate "XT keyboard"
 409         select SERIO
 410         help
 411           Say Y here if you want to use the old IBM PC/XT keyboard (or
 412           compatible) on your system. This is only possible with a
 413           parallel port keyboard adapter, you cannot connect it to the
 414           keyboard port on a PC that runs Linux.
 415
 416           To compile this driver as a module, choose M here: the
 417           module will be called xtkbd.
 418
 419 config KEYBOARD_W90P910
 420         tristate "W90P910 Matrix Keypad support"
 421         depends on ARCH_W90X900
 422         help
 423           Say Y here to enable the matrix keypad on evaluation board
 424           based on W90P910.
 425
 426           To compile this driver as a module, choose M here: the
 427           module will be called w90p910_keypad.
 428
 429 endif