drivers/input/keyboard/nomadik-ske-keypad.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
   5  * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
   6  *
   7  * License terms:GNU General Public License (GPL) version 2
   8  *
   9  * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
  10  * the Nomadik 8815 and Ux500 platforms.
  11  */
  12
  13 #include <linux/platform_device.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/spinlock.h>
  16 #include <linux/io.h>
  17 #include <linux/delay.h>
  18 #include <linux/input.h>
  19 #include <linux/slab.h>
  20 #include <linux/clk.h>
  21 #include <linux/module.h>
  22
  23 #include <plat/ske.h>
  24
  25 /* SKE_CR bits */
  26 #define SKE_KPMLT       (0x1 << 6)
  27 #define SKE_KPCN        (0x7 << 3)
  28 #define SKE_KPASEN      (0x1 << 2)
  29 #define SKE_KPASON      (0x1 << 7)
  30
  31 /* SKE_IMSC bits */
  32 #define SKE_KPIMA       (0x1 << 2)
  33
  34 /* SKE_ICR bits */
  35 #define SKE_KPICS       (0x1 << 3)
  36 #define SKE_KPICA       (0x1 << 2)
  37
  38 /* SKE_RIS bits */
  39 #define SKE_KPRISA      (0x1 << 2)
  40
  41 #define SKE_KEYPAD_ROW_SHIFT    3
  42 #define SKE_KPD_NUM_ROWS        8
  43 #define SKE_KPD_NUM_COLS        8
  44
  45 /* keypad auto scan registers */
  46 #define SKE_ASR0        0x20
  47 #define SKE_ASR1        0x24
  48 #define SKE_ASR2        0x28
  49 #define SKE_ASR3        0x2C
  50
  51 #define SKE_NUM_ASRX_REGISTERS  (4)
  52 #define KEY_PRESSED_DELAY       10
  53
  54 /**
  55  * struct ske_keypad  - data structure used by keypad driver
  56  * @irq:        irq no
  57  * @reg_base:   ske regsiters base address
  58  * @input:      pointer to input device object
  59  * @board:      keypad platform device
  60  * @keymap:     matrix scan code table for keycodes
  61  * @clk:        clock structure pointer
  62  */
  63 struct ske_keypad {
  64         int irq;
  65         void __iomem *reg_base;
  66         struct input_dev *input;
  67         const struct ske_keypad_platform_data *board;
  68         unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
  69         struct clk *clk;
  70         spinlock_t ske_keypad_lock;
  71 };
  72
  73 static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
  74                 u8 mask, u8 data)
  75 {
  76         u32 ret;
  77
  78         spin_lock(&keypad->ske_keypad_lock);
  79
  80         ret = readl(keypad->reg_base + addr);
  81         ret &= ~mask;
  82         ret |= data;
  83         writel(ret, keypad->reg_base + addr);
  84
  85         spin_unlock(&keypad->ske_keypad_lock);
  86 }
  87
  88 /*
  89  * ske_keypad_chip_init: init keypad controller configuration
  90  *
  91  * Enable Multi key press detection, auto scan mode
  92  */
  93 static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
  94 {
  95         u32 value;
  96         int timeout = keypad->board->debounce_ms;
  97
  98         /* check SKE_RIS to be 0 */
  99         while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
 100                 cpu_relax();
 101
 102         if (!timeout)
 103                 return -EINVAL;
 104
 105         /*
 106          * set debounce value
 107          * keypad dbounce is configured in DBCR[15:8]
 108          * dbounce value in steps of 32/32.768 ms
 109          */
 110         spin_lock(&keypad->ske_keypad_lock);
 111         value = readl(keypad->reg_base + SKE_DBCR);
 112         value = value & 0xff;
 113         value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
 114         writel(value, keypad->reg_base + SKE_DBCR);
 115         spin_unlock(&keypad->ske_keypad_lock);
 116
 117         /* enable multi key detection */
 118         ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
 119
 120         /*
 121          * set up the number of columns
 122          * KPCN[5:3] defines no. of keypad columns to be auto scanned
 123          */
 124         value = (keypad->board->kcol - 1) << 3;
 125         ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
 126
 127         /* clear keypad interrupt for auto(and pending SW) scans */
 128         ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
 129
 130         /* un-mask keypad interrupts */
 131         ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
 132
 133         /* enable automatic scan */
 134         ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
 135
 136         return 0;
 137 }
 138
 139 static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
 140 {
 141         int row = 0, code, pos;
 142         struct input_dev *input = keypad->input;
 143         u32 ske_ris;
 144         int key_pressed;
 145         int num_of_rows;
 146
 147         /* find out the row */
 148         num_of_rows = hweight8(status);
 149         do {
 150                 pos = __ffs(status);
 151                 row = pos;
 152                 status &= ~(1 << pos);
 153
 154                 code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
 155                 ske_ris = readl(keypad->reg_base + SKE_RIS);
 156                 key_pressed = ske_ris & SKE_KPRISA;
 157
 158                 input_event(input, EV_MSC, MSC_SCAN, code);
 159                 input_report_key(input, keypad->keymap[code], key_pressed);
 160                 input_sync(input);
 161                 num_of_rows--;
 162         } while (num_of_rows);
 163 }
 164
 165 static void ske_keypad_read_data(struct ske_keypad *keypad)
 166 {
 167         u8 status;
 168         int col = 0;
 169         int ske_asr, i;
 170
 171         /*
 172          * Read the auto scan registers
 173          *
 174          * Each SKE_ASRx (x=0 to x=3) contains two row values.
 175          * lower byte contains row value for column 2*x,
 176          * upper byte contains row value for column 2*x + 1
 177          */
 178         for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
 179                 ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
 180                 if (!ske_asr)
 181                         continue;
 182
 183                 /* now that ASRx is zero, find out the coloumn x and row y */
 184                 status = ske_asr & 0xff;
 185                 if (status) {
 186                         col = i * 2;
 187                         ske_keypad_report(keypad, status, col);
 188                 }
 189                 status = (ske_asr & 0xff00) >> 8;
 190                 if (status) {
 191                         col = (i * 2) + 1;
 192                         ske_keypad_report(keypad, status, col);
 193                 }
 194         }
 195 }
 196
 197 static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
 198 {
 199         struct ske_keypad *keypad = dev_id;
 200         int timeout = keypad->board->debounce_ms;
 201
 202         /* disable auto scan interrupt; mask the interrupt generated */
 203         ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
 204         ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
 205
 206         while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
 207                 cpu_relax();
 208
 209         /* SKEx registers are stable and can be read */
 210         ske_keypad_read_data(keypad);
 211
 212         /* wait until raw interrupt is clear */
 213         while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
 214                 msleep(KEY_PRESSED_DELAY);
 215
 216         /* enable auto scan interrupts */
 217         ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
 218
 219         return IRQ_HANDLED;
 220 }
 221
 222 static int __init ske_keypad_probe(struct platform_device *pdev)
 223 {
 224         const struct ske_keypad_platform_data *plat = pdev->dev.platform_data;
 225         struct ske_keypad *keypad;
 226         struct input_dev *input;
 227         struct resource *res;
 228         int irq;
 229         int error;
 230
 231         if (!plat) {
 232                 dev_err(&pdev->dev, "invalid keypad platform data\n");
 233                 return -EINVAL;
 234         }
 235
 236         irq = platform_get_irq(pdev, 0);
 237         if (irq < 0) {
 238                 dev_err(&pdev->dev, "failed to get keypad irq\n");
 239                 return -EINVAL;
 240         }
 241
 242         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 243         if (!res) {
 244                 dev_err(&pdev->dev, "missing platform resources\n");
 245                 return -EINVAL;
 246         }
 247
 248         keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
 249         input = input_allocate_device();
 250         if (!keypad || !input) {
 251                 dev_err(&pdev->dev, "failed to allocate keypad memory\n");
 252                 error = -ENOMEM;
 253                 goto err_free_mem;
 254         }
 255
 256         keypad->irq = irq;
 257         keypad->board = plat;
 258         keypad->input = input;
 259         spin_lock_init(&keypad->ske_keypad_lock);
 260
 261         if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
 262                 dev_err(&pdev->dev, "failed to request I/O memory\n");
 263                 error = -EBUSY;
 264                 goto err_free_mem;
 265         }
 266
 267         keypad->reg_base = ioremap(res->start, resource_size(res));
 268         if (!keypad->reg_base) {
 269                 dev_err(&pdev->dev, "failed to remap I/O memory\n");
 270                 error = -ENXIO;
 271                 goto err_free_mem_region;
 272         }
 273
 274         keypad->clk = clk_get(&pdev->dev, NULL);
 275         if (IS_ERR(keypad->clk)) {
 276                 dev_err(&pdev->dev, "failed to get clk\n");
 277                 error = PTR_ERR(keypad->clk);
 278                 goto err_iounmap;
 279         }
 280
 281         input->id.bustype = BUS_HOST;
 282         input->name = "ux500-ske-keypad";
 283         input->dev.parent = &pdev->dev;
 284
 285         error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
 286                                            SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
 287                                            keypad->keymap, input);
 288         if (error) {
 289                 dev_err(&pdev->dev, "Failed to build keymap\n");
 290                 goto err_iounmap;
 291         }
 292
 293         input_set_capability(input, EV_MSC, MSC_SCAN);
 294         if (!plat->no_autorepeat)
 295                 __set_bit(EV_REP, input->evbit);
 296
 297         clk_enable(keypad->clk);
 298
 299         /* go through board initialization helpers */
 300         if (keypad->board->init)
 301                 keypad->board->init();
 302
 303         error = ske_keypad_chip_init(keypad);
 304         if (error) {
 305                 dev_err(&pdev->dev, "unable to init keypad hardware\n");
 306                 goto err_clk_disable;
 307         }
 308
 309         error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
 310                                      IRQF_ONESHOT, "ske-keypad", keypad);
 311         if (error) {
 312                 dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
 313                 goto err_clk_disable;
 314         }
 315
 316         error = input_register_device(input);
 317         if (error) {
 318                 dev_err(&pdev->dev,
 319                                 "unable to register input device: %d\n", error);
 320                 goto err_free_irq;
 321         }
 322
 323         if (plat->wakeup_enable)
 324                 device_init_wakeup(&pdev->dev, true);
 325
 326         platform_set_drvdata(pdev, keypad);
 327
 328         return 0;
 329
 330 err_free_irq:
 331         free_irq(keypad->irq, keypad);
 332 err_clk_disable:
 333         clk_disable(keypad->clk);
 334         clk_put(keypad->clk);
 335 err_iounmap:
 336         iounmap(keypad->reg_base);
 337 err_free_mem_region:
 338         release_mem_region(res->start, resource_size(res));
 339 err_free_mem:
 340         input_free_device(input);
 341         kfree(keypad);
 342         return error;
 343 }
 344
 345 static int __devexit ske_keypad_remove(struct platform_device *pdev)
 346 {
 347         struct ske_keypad *keypad = platform_get_drvdata(pdev);
 348         struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 349
 350         free_irq(keypad->irq, keypad);
 351
 352         input_unregister_device(keypad->input);
 353
 354         clk_disable(keypad->clk);
 355         clk_put(keypad->clk);
 356
 357         if (keypad->board->exit)
 358                 keypad->board->exit();
 359
 360         iounmap(keypad->reg_base);
 361         release_mem_region(res->start, resource_size(res));
 362         kfree(keypad);
 363
 364         return 0;
 365 }
 366
 367 #ifdef CONFIG_PM_SLEEP
 368 static int ske_keypad_suspend(struct device *dev)
 369 {
 370         struct platform_device *pdev = to_platform_device(dev);
 371         struct ske_keypad *keypad = platform_get_drvdata(pdev);
 372         int irq = platform_get_irq(pdev, 0);
 373
 374         if (device_may_wakeup(dev))
 375                 enable_irq_wake(irq);
 376         else
 377                 ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
 378
 379         return 0;
 380 }
 381
 382 static int ske_keypad_resume(struct device *dev)
 383 {
 384         struct platform_device *pdev = to_platform_device(dev);
 385         struct ske_keypad *keypad = platform_get_drvdata(pdev);
 386         int irq = platform_get_irq(pdev, 0);
 387
 388         if (device_may_wakeup(dev))
 389                 disable_irq_wake(irq);
 390         else
 391                 ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
 392
 393         return 0;
 394 }
 395 #endif
 396
 397 static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops,
 398                          ske_keypad_suspend, ske_keypad_resume);
 399
 400 static struct platform_driver ske_keypad_driver = {
 401         .driver = {
 402                 .name = "nmk-ske-keypad",
 403                 .owner  = THIS_MODULE,
 404                 .pm = &ske_keypad_dev_pm_ops,
 405         },
 406         .remove = __devexit_p(ske_keypad_remove),
 407 };
 408
 409 static int __init ske_keypad_init(void)
 410 {
 411         return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe);
 412 }
 413 module_init(ske_keypad_init);
 414
 415 static void __exit ske_keypad_exit(void)
 416 {
 417         platform_driver_unregister(&ske_keypad_driver);
 418 }
 419 module_exit(ske_keypad_exit);
 420
 421 MODULE_LICENSE("GPL v2");
 422 MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
 423 MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
 424 MODULE_ALIAS("platform:nomadik-ske-keypad");