Merge tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry...
[deliverable/linux.git] / drivers / input / serio / maceps2.c
1 /*
2 * SGI O2 MACE PS2 controller driver for linux
3 *
4 * Copyright (C) 2002 Vivien Chappelier
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation
9 */
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/serio.h>
13 #include <linux/errno.h>
14 #include <linux/interrupt.h>
15 #include <linux/ioport.h>
16 #include <linux/delay.h>
17 #include <linux/platform_device.h>
18 #include <linux/slab.h>
19 #include <linux/spinlock.h>
20 #include <linux/err.h>
21
22 #include <asm/io.h>
23 #include <asm/irq.h>
24 #include <asm/ip32/mace.h>
25 #include <asm/ip32/ip32_ints.h>
26
27 MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
28 MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
29 MODULE_LICENSE("GPL");
30
31 #define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
32
33 #define PS2_STATUS_CLOCK_SIGNAL BIT(0) /* external clock signal */
34 #define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
35 #define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
36 #define PS2_STATUS_TX_EMPTY BIT(3) /* empty transmit buffer */
37 #define PS2_STATUS_RX_FULL BIT(4) /* full receive buffer */
38 #define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
39 #define PS2_STATUS_ERROR_PARITY BIT(6) /* parity error */
40 #define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
41
42 #define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
43 #define PS2_CONTROL_TX_ENABLE BIT(1) /* transmit enable */
44 #define PS2_CONTROL_TX_INT_ENABLE BIT(2) /* enable transmit interrupt */
45 #define PS2_CONTROL_RX_INT_ENABLE BIT(3) /* enable receive interrupt */
46 #define PS2_CONTROL_RX_CLOCK_ENABLE BIT(4) /* pause reception if set to 0 */
47 #define PS2_CONTROL_RESET BIT(5) /* reset */
48
49 struct maceps2_data {
50 struct mace_ps2port *port;
51 int irq;
52 };
53
54 static struct maceps2_data port_data[2];
55 static struct serio *maceps2_port[2];
56 static struct platform_device *maceps2_device;
57
58 static int maceps2_write(struct serio *dev, unsigned char val)
59 {
60 struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
61 unsigned int timeout = MACE_PS2_TIMEOUT;
62
63 do {
64 if (port->status & PS2_STATUS_TX_EMPTY) {
65 port->tx = val;
66 return 0;
67 }
68 udelay(50);
69 } while (timeout--);
70
71 return -1;
72 }
73
74 static irqreturn_t maceps2_interrupt(int irq, void *dev_id)
75 {
76 struct serio *dev = dev_id;
77 struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
78 unsigned long byte;
79
80 if (port->status & PS2_STATUS_RX_FULL) {
81 byte = port->rx;
82 serio_interrupt(dev, byte & 0xff, 0);
83 }
84
85 return IRQ_HANDLED;
86 }
87
88 static int maceps2_open(struct serio *dev)
89 {
90 struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
91
92 if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) {
93 printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
94 return -EBUSY;
95 }
96
97 /* Reset port */
98 data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
99 udelay(100);
100
101 /* Enable interrupts */
102 data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE |
103 PS2_CONTROL_TX_ENABLE |
104 PS2_CONTROL_RX_INT_ENABLE;
105
106 return 0;
107 }
108
109 static void maceps2_close(struct serio *dev)
110 {
111 struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
112
113 data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
114 udelay(100);
115 free_irq(data->irq, dev);
116 }
117
118
119 static struct serio *maceps2_allocate_port(int idx)
120 {
121 struct serio *serio;
122
123 serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
124 if (serio) {
125 serio->id.type = SERIO_8042;
126 serio->write = maceps2_write;
127 serio->open = maceps2_open;
128 serio->close = maceps2_close;
129 snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx);
130 snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx);
131 serio->port_data = &port_data[idx];
132 serio->dev.parent = &maceps2_device->dev;
133 }
134
135 return serio;
136 }
137
138 static int maceps2_probe(struct platform_device *dev)
139 {
140 maceps2_port[0] = maceps2_allocate_port(0);
141 maceps2_port[1] = maceps2_allocate_port(1);
142 if (!maceps2_port[0] || !maceps2_port[1]) {
143 kfree(maceps2_port[0]);
144 kfree(maceps2_port[1]);
145 return -ENOMEM;
146 }
147
148 serio_register_port(maceps2_port[0]);
149 serio_register_port(maceps2_port[1]);
150
151 return 0;
152 }
153
154 static int maceps2_remove(struct platform_device *dev)
155 {
156 serio_unregister_port(maceps2_port[0]);
157 serio_unregister_port(maceps2_port[1]);
158
159 return 0;
160 }
161
162 static struct platform_driver maceps2_driver = {
163 .driver = {
164 .name = "maceps2",
165 },
166 .probe = maceps2_probe,
167 .remove = maceps2_remove,
168 };
169
170 static int __init maceps2_init(void)
171 {
172 int error;
173
174 error = platform_driver_register(&maceps2_driver);
175 if (error)
176 return error;
177
178 maceps2_device = platform_device_alloc("maceps2", -1);
179 if (!maceps2_device) {
180 error = -ENOMEM;
181 goto err_unregister_driver;
182 }
183
184 port_data[0].port = &mace->perif.ps2.keyb;
185 port_data[0].irq = MACEISA_KEYB_IRQ;
186 port_data[1].port = &mace->perif.ps2.mouse;
187 port_data[1].irq = MACEISA_MOUSE_IRQ;
188
189 error = platform_device_add(maceps2_device);
190 if (error)
191 goto err_free_device;
192
193 return 0;
194
195 err_free_device:
196 platform_device_put(maceps2_device);
197 err_unregister_driver:
198 platform_driver_unregister(&maceps2_driver);
199 return error;
200 }
201
202 static void __exit maceps2_exit(void)
203 {
204 platform_device_unregister(maceps2_device);
205 platform_driver_unregister(&maceps2_driver);
206 }
207
208 module_init(maceps2_init);
209 module_exit(maceps2_exit);
This page took 0.036319 seconds and 5 git commands to generate.