drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_ADS7846
  15         tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
  16         depends on SPI_MASTER
  17         depends on HWMON = n || HWMON
  18         help
  19           Say Y here if you have a touchscreen interface using the
  20           ADS7846/TSC2046 or ADS7843 controller, and your board-specific
  21           setup code includes that in its table of SPI devices.
  22
  23           If HWMON is selected, and the driver is told the reference voltage
  24           on your board, you will also get hwmon interfaces for the voltage
  25           (and on ads7846/tsc2046, temperature) sensors of this chip.
  26
  27           If unsure, say N (but it's safe to say "Y").
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called ads7846.
  31
  32 config TOUCHSCREEN_AD7877
  33         tristate "AD7877 based touchscreens"
  34         depends on SPI_MASTER
  35         help
  36           Say Y here if you have a touchscreen interface using the
  37           AD7877 controller, and your board-specific initialization
  38           code includes that in its table of SPI devices.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ad7877.
  44
  45 config TOUCHSCREEN_AD7879_I2C
  46         tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
  47         depends on I2C
  48         select TOUCHSCREEN_AD7879
  49         help
  50           Say Y here if you have a touchscreen interface using the
  51           AD7879-1/AD7889-1 controller, and your board-specific
  52           initialization code includes that in its table of I2C devices.
  53
  54           If unsure, say N (but it's safe to say "Y").
  55
  56           To compile this driver as a module, choose M here: the
  57           module will be called ad7879.
  58
  59 config TOUCHSCREEN_AD7879_SPI
  60         tristate "AD7879 based touchscreens: AD7879 SPI Interface"
  61         depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
  62         select TOUCHSCREEN_AD7879
  63         help
  64           Say Y here if you have a touchscreen interface using the
  65           AD7879/AD7889 controller, and your board-specific initialization
  66           code includes that in its table of SPI devices.
  67
  68           If unsure, say N (but it's safe to say "Y").
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879
  74         tristate
  75         default n
  76
  77 config TOUCHSCREEN_BITSY
  78         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
  79         depends on SA1100_BITSY
  80         select SERIO
  81         help
  82           Say Y here if you have the h3600 (Bitsy) touchscreen.
  83
  84           If unsure, say N.
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called h3600_ts_input.
  88
  89 config TOUCHSCREEN_CORGI
  90         tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
  91         depends on PXA_SHARPSL
  92         select CORGI_SSP_DEPRECATED
  93         default y
  94         help
  95           Say Y here to enable the driver for the touchscreen on the
  96           Sharp SL-C7xx and SL-Cxx00 series of PDAs.
  97
  98           If unsure, say N.
  99
 100           To compile this driver as a module, choose M here: the
 101           module will be called corgi_ts.
 102
 103           NOTE: this driver is deprecated, try enable SPI and generic
 104           ADS7846-based touchscreen driver.
 105
 106 config TOUCHSCREEN_DA9034
 107         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 108         depends on PMIC_DA903X
 109         default y
 110         help
 111           Say Y here to enable the support for the touchscreen found
 112           on Dialog Semiconductor DA9034 PMIC.
 113
 114 config TOUCHSCREEN_DYNAPRO
 115         tristate "Dynapro serial touchscreen"
 116         select SERIO
 117         help
 118           Say Y here if you have a Dynapro serial touchscreen connected to
 119           your system.
 120
 121           If unsure, say N.
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called dynapro.
 125
 126 config TOUCHSCREEN_EETI
 127         tristate "EETI touchscreen panel support"
 128         depends on I2C
 129         help
 130           Say Y here to enable support for I2C connected EETI touch panels.
 131
 132           To compile this driver as a module, choose M here: the
 133           module will be called eeti_ts.
 134
 135 config TOUCHSCREEN_FUJITSU
 136         tristate "Fujitsu serial touchscreen"
 137         select SERIO
 138         help
 139           Say Y here if you have the Fujitsu touchscreen (such as one
 140           installed in Lifebook P series laptop) connected to your
 141           system.
 142
 143           If unsure, say N.
 144
 145           To compile this driver as a module, choose M here: the
 146           module will be called fujitsu-ts.
 147
 148 config TOUCHSCREEN_GUNZE
 149         tristate "Gunze AHL-51S touchscreen"
 150         select SERIO
 151         help
 152           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 153           your system.
 154
 155           If unsure, say N.
 156
 157           To compile this driver as a module, choose M here: the
 158           module will be called gunze.
 159
 160 config TOUCHSCREEN_ELO
 161         tristate "Elo serial touchscreens"
 162         select SERIO
 163         help
 164           Say Y here if you have an Elo serial touchscreen connected to
 165           your system.
 166
 167           If unsure, say N.
 168
 169           To compile this driver as a module, choose M here: the
 170           module will be called elo.
 171
 172 config TOUCHSCREEN_WACOM_W8001
 173         tristate "Wacom W8001 penabled serial touchscreen"
 174         select SERIO
 175         help
 176           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 177           connected to your system.
 178
 179           If unsure, say N.
 180
 181           To compile this driver as a module, choose M here: the
 182           module will be called wacom_w8001.
 183
 184 config TOUCHSCREEN_MCS5000
 185         tristate "MELFAS MCS-5000 touchscreen"
 186         depends on I2C
 187         help
 188           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 189           chip in your system.
 190
 191           If unsure, say N.
 192
 193           To compile this driver as a module, choose M here: the
 194           module will be called mcs5000_ts.
 195
 196 config TOUCHSCREEN_MTOUCH
 197         tristate "MicroTouch serial touchscreens"
 198         select SERIO
 199         help
 200           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 201           your system.
 202
 203           If unsure, say N.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called mtouch.
 207
 208 config TOUCHSCREEN_INEXIO
 209         tristate "iNexio serial touchscreens"
 210         select SERIO
 211         help
 212           Say Y here if you have an iNexio serial touchscreen connected to
 213           your system.
 214
 215           If unsure, say N.
 216
 217           To compile this driver as a module, choose M here: the
 218           module will be called inexio.
 219
 220 config TOUCHSCREEN_MK712
 221         tristate "ICS MicroClock MK712 touchscreen"
 222         help
 223           Say Y here if you have the ICS MicroClock MK712 touchscreen
 224           controller chip in your system.
 225
 226           If unsure, say N.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called mk712.
 230
 231 config TOUCHSCREEN_HP600
 232         tristate "HP Jornada 6xx touchscreen"
 233         depends on SH_HP6XX && SH_ADC
 234         help
 235           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 236           support the built-in touchscreen.
 237
 238           To compile this driver as a module, choose M here: the
 239           module will be called hp680_ts_input.
 240
 241 config TOUCHSCREEN_HP7XX
 242         tristate "HP Jornada 7xx touchscreen"
 243         depends on SA1100_JORNADA720_SSP
 244         help
 245           Say Y here if you have a HP Jornada 710/720/728 and want
 246           to support the built-in touchscreen.
 247
 248           To compile this driver as a module, choose M here: the
 249           module will be called jornada720_ts.
 250
 251 config TOUCHSCREEN_HTCPEN
 252         tristate "HTC Shift X9500 touchscreen"
 253         depends on ISA
 254         help
 255           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 256           Clio / Shangrila and want to support the built-in touchscreen.
 257
 258           If unsure, say N.
 259
 260           To compile this driver as a module, choose M here: the
 261           module will be called htcpen.
 262
 263 config TOUCHSCREEN_PENMOUNT
 264         tristate "Penmount serial touchscreen"
 265         select SERIO
 266         help
 267           Say Y here if you have a Penmount serial touchscreen connected to
 268           your system.
 269
 270           If unsure, say N.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called penmount.
 274
 275 config TOUCHSCREEN_MIGOR
 276         tristate "Renesas MIGO-R touchscreen"
 277         depends on SH_MIGOR && I2C
 278         help
 279           Say Y here to enable MIGO-R touchscreen support.
 280
 281           If unsure, say N.
 282
 283           To compile this driver as a module, choose M here: the
 284           module will be called migor_ts.
 285
 286 config TOUCHSCREEN_TOUCHRIGHT
 287         tristate "Touchright serial touchscreen"
 288         select SERIO
 289         help
 290           Say Y here if you have a Touchright serial touchscreen connected to
 291           your system.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called touchright.
 297
 298 config TOUCHSCREEN_TOUCHWIN
 299         tristate "Touchwin serial touchscreen"
 300         select SERIO
 301         help
 302           Say Y here if you have a Touchwin serial touchscreen connected to
 303           your system.
 304
 305           If unsure, say N.
 306
 307           To compile this driver as a module, choose M here: the
 308           module will be called touchwin.
 309
 310 config TOUCHSCREEN_ATMEL_TSADCC
 311         tristate "Atmel Touchscreen Interface"
 312         depends on ARCH_AT91SAM9RL
 313         help
 314           Say Y here if you have a 4-wire touchscreen connected to the
 315           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
 316
 317           If unsure, say N.
 318
 319           To compile this driver as a module, choose M here: the
 320           module will be called atmel_tsadcc.
 321
 322 config TOUCHSCREEN_UCB1400
 323         tristate "Philips UCB1400 touchscreen"
 324         depends on AC97_BUS
 325         depends on UCB1400_CORE
 326         help
 327           This enables support for the Philips UCB1400 touchscreen interface.
 328           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 329           will be initialized only after the ALSA subsystem has been
 330           brought up and the UCB1400 detected.  You therefore have to
 331           configure ALSA support as well (either built-in or modular,
 332           independently of whether this driver is itself built-in or
 333           modular) for this driver to work.
 334
 335           To compile this driver as a module, choose M here: the
 336           module will be called ucb1400_ts.
 337
 338 config TOUCHSCREEN_WM97XX
 339         tristate "Support for WM97xx AC97 touchscreen controllers"
 340         depends on AC97_BUS
 341         help
 342           Say Y here if you have a Wolfson Microelectronics WM97xx
 343           touchscreen connected to your system. Note that this option
 344           only enables core driver, you will also need to select
 345           support for appropriate chip below.
 346
 347           If unsure, say N.
 348
 349           To compile this driver as a module, choose M here: the
 350           module will be called wm97xx-ts.
 351
 352 config TOUCHSCREEN_WM9705
 353         bool "WM9705 Touchscreen interface support"
 354         depends on TOUCHSCREEN_WM97XX
 355         default y
 356         help
 357           Say Y here to enable support for the Wolfson Microelectronics
 358           WM9705 touchscreen controller.
 359
 360 config TOUCHSCREEN_WM9712
 361         bool "WM9712 Touchscreen interface support"
 362         depends on TOUCHSCREEN_WM97XX
 363         default y
 364         help
 365           Say Y here to enable support for the Wolfson Microelectronics
 366           WM9712 touchscreen controller.
 367
 368 config TOUCHSCREEN_WM9713
 369         bool "WM9713 Touchscreen interface support"
 370         depends on TOUCHSCREEN_WM97XX
 371         default y
 372         help
 373           Say Y here to enable support for the Wolfson Microelectronics
 374           WM9713 touchscreen controller.
 375
 376 config TOUCHSCREEN_WM97XX_ATMEL
 377         tristate "WM97xx Atmel accelerated touch"
 378         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 379         help
 380           Say Y here for support for streaming mode with WM97xx touchscreens
 381           on Atmel AT91 or AVR32 systems with an AC97C module.
 382
 383           Be aware that this will use channel B in the controller for
 384           streaming data, this must not conflict with other AC97C drivers.
 385
 386           If unsure, say N.
 387
 388           To compile this driver as a module, choose M here: the module will
 389           be called atmel-wm97xx.
 390
 391 config TOUCHSCREEN_WM97XX_MAINSTONE
 392         tristate "WM97xx Mainstone/Palm accelerated touch"
 393         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 394         help
 395           Say Y here for support for streaming mode with WM97xx touchscreens
 396           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 397
 398           If unsure, say N.
 399
 400           To compile this driver as a module, choose M here: the
 401           module will be called mainstone-wm97xx.
 402
 403 config TOUCHSCREEN_WM97XX_ZYLONITE
 404         tristate "Zylonite accelerated touch"
 405         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 406         select TOUCHSCREEN_WM9713
 407         help
 408           Say Y here for support for streaming mode with the touchscreen
 409           on Zylonite systems.
 410
 411           If unsure, say N.
 412
 413           To compile this driver as a module, choose M here: the
 414           module will be called zylonite-wm97xx.
 415
 416 config TOUCHSCREEN_USB_COMPOSITE
 417         tristate "USB Touchscreen Driver"
 418         depends on USB_ARCH_HAS_HCD
 419         select USB
 420         help
 421           USB Touchscreen driver for:
 422           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 423           - PanJit TouchSet USB
 424           - 3M MicroTouch USB (EX II series)
 425           - ITM
 426           - some other eTurboTouch
 427           - Gunze AHL61
 428           - DMC TSC-10/25
 429           - IRTOUCHSYSTEMS/UNITOP
 430           - IdealTEK URTC1000
 431           - GoTop Super_Q2/GogoPen/PenPower tablets
 432           - JASTEC USB Touch Controller/DigiTech DTR-02U
 433
 434           Have a look at <http://linux.chapter7.ch/touchkit/> for
 435           a usage description and the required user-space stuff.
 436
 437           To compile this driver as a module, choose M here: the
 438           module will be called usbtouchscreen.
 439
 440 config TOUCHSCREEN_USB_EGALAX
 441         default y
 442         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 443         depends on TOUCHSCREEN_USB_COMPOSITE
 444
 445 config TOUCHSCREEN_USB_PANJIT
 446         default y
 447         bool "PanJit device support" if EMBEDDED
 448         depends on TOUCHSCREEN_USB_COMPOSITE
 449
 450 config TOUCHSCREEN_USB_3M
 451         default y
 452         bool "3M/Microtouch EX II series device support" if EMBEDDED
 453         depends on TOUCHSCREEN_USB_COMPOSITE
 454
 455 config TOUCHSCREEN_USB_ITM
 456         default y
 457         bool "ITM device support" if EMBEDDED
 458         depends on TOUCHSCREEN_USB_COMPOSITE
 459
 460 config TOUCHSCREEN_USB_ETURBO
 461         default y
 462         bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 463         depends on TOUCHSCREEN_USB_COMPOSITE
 464
 465 config TOUCHSCREEN_USB_GUNZE
 466         default y
 467         bool "Gunze AHL61 device support" if EMBEDDED
 468         depends on TOUCHSCREEN_USB_COMPOSITE
 469
 470 config TOUCHSCREEN_USB_DMC_TSC10
 471         default y
 472         bool "DMC TSC-10/25 device support" if EMBEDDED
 473         depends on TOUCHSCREEN_USB_COMPOSITE
 474
 475 config TOUCHSCREEN_USB_IRTOUCH
 476         default y
 477         bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
 478         depends on TOUCHSCREEN_USB_COMPOSITE
 479
 480 config TOUCHSCREEN_USB_IDEALTEK
 481         default y
 482         bool "IdealTEK URTC1000 device support" if EMBEDDED
 483         depends on TOUCHSCREEN_USB_COMPOSITE
 484
 485 config TOUCHSCREEN_USB_GENERAL_TOUCH
 486         default y
 487         bool "GeneralTouch Touchscreen device support" if EMBEDDED
 488         depends on TOUCHSCREEN_USB_COMPOSITE
 489
 490 config TOUCHSCREEN_USB_GOTOP
 491         default y
 492         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
 493         depends on TOUCHSCREEN_USB_COMPOSITE
 494
 495 config TOUCHSCREEN_USB_JASTEC
 496         default y
 497         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
 498         depends on TOUCHSCREEN_USB_COMPOSITE
 499
 500 config TOUCHSCREEN_USB_E2I
 501         default y
 502         bool "e2i Touchscreen controller (e.g. from Mimo 740)"
 503         depends on TOUCHSCREEN_USB_COMPOSITE
 504
 505 config TOUCHSCREEN_TOUCHIT213
 506         tristate "Sahara TouchIT-213 touchscreen"
 507         select SERIO
 508         help
 509           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 510
 511           If unsure, say N.
 512
 513           To compile this driver as a module, choose M here: the
 514           module will be called touchit213.
 515
 516 config TOUCHSCREEN_TSC2007
 517         tristate "TSC2007 based touchscreens"
 518         depends on I2C
 519         help
 520           Say Y here if you have a TSC2007 based touchscreen.
 521
 522           If unsure, say N.
 523
 524           To compile this driver as a module, choose M here: the
 525           module will be called tsc2007.
 526
 527 config TOUCHSCREEN_W90X900
 528         tristate "W90P910 touchscreen driver"
 529         depends on HAVE_CLK
 530         help
 531           Say Y here if you have a W90P910 based touchscreen.
 532
 533           To compile this driver as a module, choose M here: the
 534           module will be called w90p910_ts.
 535
 536 config TOUCHSCREEN_PCAP
 537         tristate "Motorola PCAP touchscreen"
 538         depends on EZX_PCAP
 539         help
 540           Say Y here if you have a Motorola EZX telephone and
 541           want to enable support for the built-in touchscreen.
 542
 543           To compile this driver as a module, choose M here: the
 544           module will be called pcap_ts.
 545 endif