drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_ADS7846
  15         tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
  16         depends on SPI_MASTER
  17         depends on HWMON = n || HWMON
  18         help
  19           Say Y here if you have a touchscreen interface using the
  20           ADS7846/TSC2046 or ADS7843 controller, and your board-specific
  21           setup code includes that in its table of SPI devices.
  22
  23           If HWMON is selected, and the driver is told the reference voltage
  24           on your board, you will also get hwmon interfaces for the voltage
  25           (and on ads7846/tsc2046, temperature) sensors of this chip.
  26
  27           If unsure, say N (but it's safe to say "Y").
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called ads7846.
  31
  32 config TOUCHSCREEN_AD7877
  33         tristate "AD7877 based touchscreens"
  34         depends on SPI_MASTER
  35         help
  36           Say Y here if you have a touchscreen interface using the
  37           AD7877 controller, and your board-specific initialization
  38           code includes that in its table of SPI devices.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ad7877.
  44
  45 config TOUCHSCREEN_AD7879_I2C
  46         tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
  47         depends on I2C
  48         select TOUCHSCREEN_AD7879
  49         help
  50           Say Y here if you have a touchscreen interface using the
  51           AD7879-1/AD7889-1 controller, and your board-specific
  52           initialization code includes that in its table of I2C devices.
  53
  54           If unsure, say N (but it's safe to say "Y").
  55
  56           To compile this driver as a module, choose M here: the
  57           module will be called ad7879.
  58
  59 config TOUCHSCREEN_AD7879_SPI
  60         tristate "AD7879 based touchscreens: AD7879 SPI Interface"
  61         depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
  62         select TOUCHSCREEN_AD7879
  63         help
  64           Say Y here if you have a touchscreen interface using the
  65           AD7879/AD7889 controller, and your board-specific initialization
  66           code includes that in its table of SPI devices.
  67
  68           If unsure, say N (but it's safe to say "Y").
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879
  74         tristate
  75         default n
  76
  77 config TOUCHSCREEN_BITSY
  78         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
  79         depends on SA1100_BITSY
  80         select SERIO
  81         help
  82           Say Y here if you have the h3600 (Bitsy) touchscreen.
  83
  84           If unsure, say N.
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called h3600_ts_input.
  88
  89 config TOUCHSCREEN_CORGI
  90         tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
  91         depends on PXA_SHARPSL
  92         select CORGI_SSP_DEPRECATED
  93         default y
  94         help
  95           Say Y here to enable the driver for the touchscreen on the
  96           Sharp SL-C7xx and SL-Cxx00 series of PDAs.
  97
  98           If unsure, say N.
  99
 100           To compile this driver as a module, choose M here: the
 101           module will be called corgi_ts.
 102
 103           NOTE: this driver is deprecated, try enable SPI and generic
 104           ADS7846-based touchscreen driver.
 105
 106 config TOUCHSCREEN_DA9034
 107         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 108         depends on PMIC_DA903X
 109         default y
 110         help
 111           Say Y here to enable the support for the touchscreen found
 112           on Dialog Semiconductor DA9034 PMIC.
 113
 114 config TOUCHSCREEN_DYNAPRO
 115         tristate "Dynapro serial touchscreen"
 116         select SERIO
 117         help
 118           Say Y here if you have a Dynapro serial touchscreen connected to
 119           your system.
 120
 121           If unsure, say N.
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called dynapro.
 125
 126 config TOUCHSCREEN_EETI
 127         tristate "EETI touchscreen panel support"
 128         depends on I2C
 129         help
 130           Say Y here to enable support for I2C connected EETI touch panels.
 131
 132           To compile this driver as a module, choose M here: the
 133           module will be called eeti_ts.
 134
 135 config TOUCHSCREEN_FUJITSU
 136         tristate "Fujitsu serial touchscreen"
 137         select SERIO
 138         help
 139           Say Y here if you have the Fujitsu touchscreen (such as one
 140           installed in Lifebook P series laptop) connected to your
 141           system.
 142
 143           If unsure, say N.
 144
 145           To compile this driver as a module, choose M here: the
 146           module will be called fujitsu-ts.
 147
 148 config TOUCHSCREEN_S3C2410
 149         tristate "Samsung S3C2410 touchscreen input driver"
 150         depends on ARCH_S3C2410
 151         select S3C24XX_ADC
 152         help
 153           Say Y here if you have the s3c2410 touchscreen.
 154
 155           If unsure, say N.
 156
 157           To compile this driver as a module, choose M here: the
 158           module will be called s3c2410_ts.
 159
 160 config TOUCHSCREEN_GUNZE
 161         tristate "Gunze AHL-51S touchscreen"
 162         select SERIO
 163         help
 164           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 165           your system.
 166
 167           If unsure, say N.
 168
 169           To compile this driver as a module, choose M here: the
 170           module will be called gunze.
 171
 172 config TOUCHSCREEN_ELO
 173         tristate "Elo serial touchscreens"
 174         select SERIO
 175         help
 176           Say Y here if you have an Elo serial touchscreen connected to
 177           your system.
 178
 179           If unsure, say N.
 180
 181           To compile this driver as a module, choose M here: the
 182           module will be called elo.
 183
 184 config TOUCHSCREEN_WACOM_W8001
 185         tristate "Wacom W8001 penabled serial touchscreen"
 186         select SERIO
 187         help
 188           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 189           connected to your system.
 190
 191           If unsure, say N.
 192
 193           To compile this driver as a module, choose M here: the
 194           module will be called wacom_w8001.
 195
 196 config TOUCHSCREEN_MCS5000
 197         tristate "MELFAS MCS-5000 touchscreen"
 198         depends on I2C
 199         help
 200           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 201           chip in your system.
 202
 203           If unsure, say N.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called mcs5000_ts.
 207
 208 config TOUCHSCREEN_MTOUCH
 209         tristate "MicroTouch serial touchscreens"
 210         select SERIO
 211         help
 212           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 213           your system.
 214
 215           If unsure, say N.
 216
 217           To compile this driver as a module, choose M here: the
 218           module will be called mtouch.
 219
 220 config TOUCHSCREEN_INEXIO
 221         tristate "iNexio serial touchscreens"
 222         select SERIO
 223         help
 224           Say Y here if you have an iNexio serial touchscreen connected to
 225           your system.
 226
 227           If unsure, say N.
 228
 229           To compile this driver as a module, choose M here: the
 230           module will be called inexio.
 231
 232 config TOUCHSCREEN_MK712
 233         tristate "ICS MicroClock MK712 touchscreen"
 234         help
 235           Say Y here if you have the ICS MicroClock MK712 touchscreen
 236           controller chip in your system.
 237
 238           If unsure, say N.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called mk712.
 242
 243 config TOUCHSCREEN_HP600
 244         tristate "HP Jornada 6xx touchscreen"
 245         depends on SH_HP6XX && SH_ADC
 246         help
 247           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 248           support the built-in touchscreen.
 249
 250           To compile this driver as a module, choose M here: the
 251           module will be called hp680_ts_input.
 252
 253 config TOUCHSCREEN_HP7XX
 254         tristate "HP Jornada 7xx touchscreen"
 255         depends on SA1100_JORNADA720_SSP
 256         help
 257           Say Y here if you have a HP Jornada 710/720/728 and want
 258           to support the built-in touchscreen.
 259
 260           To compile this driver as a module, choose M here: the
 261           module will be called jornada720_ts.
 262
 263 config TOUCHSCREEN_HTCPEN
 264         tristate "HTC Shift X9500 touchscreen"
 265         depends on ISA
 266         help
 267           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 268           Clio / Shangrila and want to support the built-in touchscreen.
 269
 270           If unsure, say N.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called htcpen.
 274
 275 config TOUCHSCREEN_PENMOUNT
 276         tristate "Penmount serial touchscreen"
 277         select SERIO
 278         help
 279           Say Y here if you have a Penmount serial touchscreen connected to
 280           your system.
 281
 282           If unsure, say N.
 283
 284           To compile this driver as a module, choose M here: the
 285           module will be called penmount.
 286
 287 config TOUCHSCREEN_MIGOR
 288         tristate "Renesas MIGO-R touchscreen"
 289         depends on SH_MIGOR && I2C
 290         help
 291           Say Y here to enable MIGO-R touchscreen support.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called migor_ts.
 297
 298 config TOUCHSCREEN_TOUCHRIGHT
 299         tristate "Touchright serial touchscreen"
 300         select SERIO
 301         help
 302           Say Y here if you have a Touchright serial touchscreen connected to
 303           your system.
 304
 305           If unsure, say N.
 306
 307           To compile this driver as a module, choose M here: the
 308           module will be called touchright.
 309
 310 config TOUCHSCREEN_TOUCHWIN
 311         tristate "Touchwin serial touchscreen"
 312         select SERIO
 313         help
 314           Say Y here if you have a Touchwin serial touchscreen connected to
 315           your system.
 316
 317           If unsure, say N.
 318
 319           To compile this driver as a module, choose M here: the
 320           module will be called touchwin.
 321
 322 config TOUCHSCREEN_ATMEL_TSADCC
 323         tristate "Atmel Touchscreen Interface"
 324         depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 325         help
 326           Say Y here if you have a 4-wire touchscreen connected to the
 327           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
 328
 329           If unsure, say N.
 330
 331           To compile this driver as a module, choose M here: the
 332           module will be called atmel_tsadcc.
 333
 334 config TOUCHSCREEN_UCB1400
 335         tristate "Philips UCB1400 touchscreen"
 336         depends on AC97_BUS
 337         depends on UCB1400_CORE
 338         help
 339           This enables support for the Philips UCB1400 touchscreen interface.
 340           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 341           will be initialized only after the ALSA subsystem has been
 342           brought up and the UCB1400 detected.  You therefore have to
 343           configure ALSA support as well (either built-in or modular,
 344           independently of whether this driver is itself built-in or
 345           modular) for this driver to work.
 346
 347           To compile this driver as a module, choose M here: the
 348           module will be called ucb1400_ts.
 349
 350 config TOUCHSCREEN_WM97XX
 351         tristate "Support for WM97xx AC97 touchscreen controllers"
 352         depends on AC97_BUS
 353         help
 354           Say Y here if you have a Wolfson Microelectronics WM97xx
 355           touchscreen connected to your system. Note that this option
 356           only enables core driver, you will also need to select
 357           support for appropriate chip below.
 358
 359           If unsure, say N.
 360
 361           To compile this driver as a module, choose M here: the
 362           module will be called wm97xx-ts.
 363
 364 config TOUCHSCREEN_WM9705
 365         bool "WM9705 Touchscreen interface support"
 366         depends on TOUCHSCREEN_WM97XX
 367         default y
 368         help
 369           Say Y here to enable support for the Wolfson Microelectronics
 370           WM9705 touchscreen controller.
 371
 372 config TOUCHSCREEN_WM9712
 373         bool "WM9712 Touchscreen interface support"
 374         depends on TOUCHSCREEN_WM97XX
 375         default y
 376         help
 377           Say Y here to enable support for the Wolfson Microelectronics
 378           WM9712 touchscreen controller.
 379
 380 config TOUCHSCREEN_WM9713
 381         bool "WM9713 Touchscreen interface support"
 382         depends on TOUCHSCREEN_WM97XX
 383         default y
 384         help
 385           Say Y here to enable support for the Wolfson Microelectronics
 386           WM9713 touchscreen controller.
 387
 388 config TOUCHSCREEN_WM97XX_ATMEL
 389         tristate "WM97xx Atmel accelerated touch"
 390         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 391         help
 392           Say Y here for support for streaming mode with WM97xx touchscreens
 393           on Atmel AT91 or AVR32 systems with an AC97C module.
 394
 395           Be aware that this will use channel B in the controller for
 396           streaming data, this must not conflict with other AC97C drivers.
 397
 398           If unsure, say N.
 399
 400           To compile this driver as a module, choose M here: the module will
 401           be called atmel-wm97xx.
 402
 403 config TOUCHSCREEN_WM97XX_MAINSTONE
 404         tristate "WM97xx Mainstone/Palm accelerated touch"
 405         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 406         help
 407           Say Y here for support for streaming mode with WM97xx touchscreens
 408           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 409
 410           If unsure, say N.
 411
 412           To compile this driver as a module, choose M here: the
 413           module will be called mainstone-wm97xx.
 414
 415 config TOUCHSCREEN_WM97XX_ZYLONITE
 416         tristate "Zylonite accelerated touch"
 417         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 418         select TOUCHSCREEN_WM9713
 419         help
 420           Say Y here for support for streaming mode with the touchscreen
 421           on Zylonite systems.
 422
 423           If unsure, say N.
 424
 425           To compile this driver as a module, choose M here: the
 426           module will be called zylonite-wm97xx.
 427
 428 config TOUCHSCREEN_USB_COMPOSITE
 429         tristate "USB Touchscreen Driver"
 430         depends on USB_ARCH_HAS_HCD
 431         select USB
 432         help
 433           USB Touchscreen driver for:
 434           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 435           - PanJit TouchSet USB
 436           - 3M MicroTouch USB (EX II series)
 437           - ITM
 438           - some other eTurboTouch
 439           - Gunze AHL61
 440           - DMC TSC-10/25
 441           - IRTOUCHSYSTEMS/UNITOP
 442           - IdealTEK URTC1000
 443           - GoTop Super_Q2/GogoPen/PenPower tablets
 444           - JASTEC USB Touch Controller/DigiTech DTR-02U
 445           - Zytronic controllers
 446
 447           Have a look at <http://linux.chapter7.ch/touchkit/> for
 448           a usage description and the required user-space stuff.
 449
 450           To compile this driver as a module, choose M here: the
 451           module will be called usbtouchscreen.
 452
 453 config TOUCHSCREEN_USB_EGALAX
 454         default y
 455         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 456         depends on TOUCHSCREEN_USB_COMPOSITE
 457
 458 config TOUCHSCREEN_USB_PANJIT
 459         default y
 460         bool "PanJit device support" if EMBEDDED
 461         depends on TOUCHSCREEN_USB_COMPOSITE
 462
 463 config TOUCHSCREEN_USB_3M
 464         default y
 465         bool "3M/Microtouch EX II series device support" if EMBEDDED
 466         depends on TOUCHSCREEN_USB_COMPOSITE
 467
 468 config TOUCHSCREEN_USB_ITM
 469         default y
 470         bool "ITM device support" if EMBEDDED
 471         depends on TOUCHSCREEN_USB_COMPOSITE
 472
 473 config TOUCHSCREEN_USB_ETURBO
 474         default y
 475         bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 476         depends on TOUCHSCREEN_USB_COMPOSITE
 477
 478 config TOUCHSCREEN_USB_GUNZE
 479         default y
 480         bool "Gunze AHL61 device support" if EMBEDDED
 481         depends on TOUCHSCREEN_USB_COMPOSITE
 482
 483 config TOUCHSCREEN_USB_DMC_TSC10
 484         default y
 485         bool "DMC TSC-10/25 device support" if EMBEDDED
 486         depends on TOUCHSCREEN_USB_COMPOSITE
 487
 488 config TOUCHSCREEN_USB_IRTOUCH
 489         default y
 490         bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
 491         depends on TOUCHSCREEN_USB_COMPOSITE
 492
 493 config TOUCHSCREEN_USB_IDEALTEK
 494         default y
 495         bool "IdealTEK URTC1000 device support" if EMBEDDED
 496         depends on TOUCHSCREEN_USB_COMPOSITE
 497
 498 config TOUCHSCREEN_USB_GENERAL_TOUCH
 499         default y
 500         bool "GeneralTouch Touchscreen device support" if EMBEDDED
 501         depends on TOUCHSCREEN_USB_COMPOSITE
 502
 503 config TOUCHSCREEN_USB_GOTOP
 504         default y
 505         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
 506         depends on TOUCHSCREEN_USB_COMPOSITE
 507
 508 config TOUCHSCREEN_USB_JASTEC
 509         default y
 510         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
 511         depends on TOUCHSCREEN_USB_COMPOSITE
 512
 513 config TOUCHSCREEN_USB_E2I
 514         default y
 515         bool "e2i Touchscreen controller (e.g. from Mimo 740)"
 516         depends on TOUCHSCREEN_USB_COMPOSITE
 517
 518 config TOUCHSCREEN_USB_ZYTRONIC
 519         default y
 520         bool "Zytronic controller" if EMBEDDED
 521         depends on TOUCHSCREEN_USB_COMPOSITE
 522
 523 config TOUCHSCREEN_USB_ETT_TC5UH
 524         default y
 525         bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
 526         depends on TOUCHSCREEN_USB_COMPOSITE
 527
 528 config TOUCHSCREEN_TOUCHIT213
 529         tristate "Sahara TouchIT-213 touchscreen"
 530         select SERIO
 531         help
 532           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 533
 534           If unsure, say N.
 535
 536           To compile this driver as a module, choose M here: the
 537           module will be called touchit213.
 538
 539 config TOUCHSCREEN_TSC2007
 540         tristate "TSC2007 based touchscreens"
 541         depends on I2C
 542         help
 543           Say Y here if you have a TSC2007 based touchscreen.
 544
 545           If unsure, say N.
 546
 547           To compile this driver as a module, choose M here: the
 548           module will be called tsc2007.
 549
 550 config TOUCHSCREEN_W90X900
 551         tristate "W90P910 touchscreen driver"
 552         depends on HAVE_CLK
 553         help
 554           Say Y here if you have a W90P910 based touchscreen.
 555
 556           To compile this driver as a module, choose M here: the
 557           module will be called w90p910_ts.
 558
 559 config TOUCHSCREEN_PCAP
 560         tristate "Motorola PCAP touchscreen"
 561         depends on EZX_PCAP
 562         help
 563           Say Y here if you have a Motorola EZX telephone and
 564           want to enable support for the built-in touchscreen.
 565
 566           To compile this driver as a module, choose M here: the
 567           module will be called pcap_ts.
 568 endif