drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_ADS7846
  15         tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
  16         depends on SPI_MASTER
  17         depends on HWMON = n || HWMON
  18         help
  19           Say Y here if you have a touchscreen interface using the
  20           ADS7846/TSC2046 or ADS7843 controller, and your board-specific
  21           setup code includes that in its table of SPI devices.
  22
  23           If HWMON is selected, and the driver is told the reference voltage
  24           on your board, you will also get hwmon interfaces for the voltage
  25           (and on ads7846/tsc2046, temperature) sensors of this chip.
  26
  27           If unsure, say N (but it's safe to say "Y").
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called ads7846.
  31
  32 config TOUCHSCREEN_BITSY
  33         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
  34         depends on SA1100_BITSY
  35         select SERIO
  36         help
  37           Say Y here if you have the h3600 (Bitsy) touchscreen.
  38
  39           If unsure, say N.
  40
  41           To compile this driver as a module, choose M here: the
  42           module will be called h3600_ts_input.
  43
  44 config TOUCHSCREEN_CORGI
  45         tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
  46         depends on PXA_SHARPSL
  47         default y
  48         help
  49           Say Y here to enable the driver for the touchscreen on the
  50           Sharp SL-C7xx and SL-Cxx00 series of PDAs.
  51
  52           If unsure, say N.
  53
  54           To compile this driver as a module, choose M here: the
  55           module will be called corgi_ts.
  56
  57 config TOUCHSCREEN_FUJITSU
  58         tristate "Fujitsu serial touchscreen"
  59         select SERIO
  60         help
  61           Say Y here if you have the Fujitsu touchscreen (such as one
  62           installed in Lifebook P series laptop) connected to your
  63           system.
  64
  65           If unsure, say N.
  66
  67           To compile this driver as a module, choose M here: the
  68           module will be called fujitsu-ts.
  69
  70 config TOUCHSCREEN_GUNZE
  71         tristate "Gunze AHL-51S touchscreen"
  72         select SERIO
  73         help
  74           Say Y here if you have the Gunze AHL-51 touchscreen connected to
  75           your system.
  76
  77           If unsure, say N.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called gunze.
  81
  82 config TOUCHSCREEN_ELO
  83         tristate "Elo serial touchscreens"
  84         select SERIO
  85         help
  86           Say Y here if you have an Elo serial touchscreen connected to
  87           your system.
  88
  89           If unsure, say N.
  90
  91           To compile this driver as a module, choose M here: the
  92           module will be called elo.
  93
  94 config TOUCHSCREEN_MTOUCH
  95         tristate "MicroTouch serial touchscreens"
  96         select SERIO
  97         help
  98           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
  99           your system.
 100
 101           If unsure, say N.
 102
 103           To compile this driver as a module, choose M here: the
 104           module will be called mtouch.
 105
 106 config TOUCHSCREEN_MK712
 107         tristate "ICS MicroClock MK712 touchscreen"
 108         help
 109           Say Y here if you have the ICS MicroClock MK712 touchscreen
 110           controller chip in your system.
 111
 112           If unsure, say N.
 113
 114           To compile this driver as a module, choose M here: the
 115           module will be called mk712.
 116
 117 config TOUCHSCREEN_HP600
 118         tristate "HP Jornada 680/690 touchscreen"
 119         depends on SH_HP6XX && SH_ADC
 120         help
 121           Say Y here if you have a HP Jornada 680 or 690 and want to
 122           support the built-in touchscreen.
 123
 124           If unsure, say N.
 125
 126           To compile this driver as a module, choose M here: the
 127           module will be called hp680_ts_input.
 128
 129 config TOUCHSCREEN_HP7XX
 130         tristate "HP Jornada 710/720/728 touchscreen"
 131         depends on SA1100_JORNADA720_SSP
 132         help
 133           Say Y here if you have a HP Jornada 710/720/728 and want
 134           to support the built-in touchscreen.
 135
 136           To compile this driver as a module, choose M here: the
 137           module will be called jornada720_ts.
 138
 139 config TOUCHSCREEN_PENMOUNT
 140         tristate "Penmount serial touchscreen"
 141         select SERIO
 142         help
 143           Say Y here if you have a Penmount serial touchscreen connected to
 144           your system.
 145
 146           If unsure, say N.
 147
 148           To compile this driver as a module, choose M here: the
 149           module will be called penmount.
 150
 151 config TOUCHSCREEN_TOUCHRIGHT
 152         tristate "Touchright serial touchscreen"
 153         select SERIO
 154         help
 155           Say Y here if you have a Touchright serial touchscreen connected to
 156           your system.
 157
 158           If unsure, say N.
 159
 160           To compile this driver as a module, choose M here: the
 161           module will be called touchright.
 162
 163 config TOUCHSCREEN_TOUCHWIN
 164         tristate "Touchwin serial touchscreen"
 165         select SERIO
 166         help
 167           Say Y here if you have a Touchwin serial touchscreen connected to
 168           your system.
 169
 170           If unsure, say N.
 171
 172           To compile this driver as a module, choose M here: the
 173           module will be called touchwin.
 174
 175 config TOUCHSCREEN_UCB1400
 176         tristate "Philips UCB1400 touchscreen"
 177         select AC97_BUS
 178         help
 179           This enables support for the Philips UCB1400 touchscreen interface.
 180           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 181           will be initialized only after the ALSA subsystem has been
 182           brought up and the UCB1400 detected.  You therefore have to
 183           configure ALSA support as well (either built-in or modular,
 184           independently of whether this driver is itself built-in or
 185           modular) for this driver to work.
 186
 187           To compile this driver as a module, choose M here: the
 188           module will be called ucb1400_ts.
 189
 190 config TOUCHSCREEN_USB_COMPOSITE
 191         tristate "USB Touchscreen Driver"
 192         depends on USB_ARCH_HAS_HCD
 193         select USB
 194         help
 195           USB Touchscreen driver for:
 196           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 197           - PanJit TouchSet USB
 198           - 3M MicroTouch USB (EX II series)
 199           - ITM
 200           - some other eTurboTouch
 201           - Gunze AHL61
 202           - DMC TSC-10/25
 203           - IRTOUCHSYSTEMS/UNITOP
 204           - IdealTEK URTC1000
 205
 206           Have a look at <http://linux.chapter7.ch/touchkit/> for
 207           a usage description and the required user-space stuff.
 208
 209           To compile this driver as a module, choose M here: the
 210           module will be called usbtouchscreen.
 211
 212 config TOUCHSCREEN_USB_EGALAX
 213         default y
 214         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 215         depends on TOUCHSCREEN_USB_COMPOSITE
 216
 217 config TOUCHSCREEN_USB_PANJIT
 218         default y
 219         bool "PanJit device support" if EMBEDDED
 220         depends on TOUCHSCREEN_USB_COMPOSITE
 221
 222 config TOUCHSCREEN_USB_3M
 223         default y
 224         bool "3M/Microtouch EX II series device support" if EMBEDDED
 225         depends on TOUCHSCREEN_USB_COMPOSITE
 226
 227 config TOUCHSCREEN_USB_ITM
 228         default y
 229         bool "ITM device support" if EMBEDDED
 230         depends on TOUCHSCREEN_USB_COMPOSITE
 231
 232 config TOUCHSCREEN_USB_ETURBO
 233         default y
 234         bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 235         depends on TOUCHSCREEN_USB_COMPOSITE
 236
 237 config TOUCHSCREEN_USB_GUNZE
 238         default y
 239         bool "Gunze AHL61 device support" if EMBEDDED
 240         depends on TOUCHSCREEN_USB_COMPOSITE
 241
 242 config TOUCHSCREEN_USB_DMC_TSC10
 243         default y
 244         bool "DMC TSC-10/25 device support" if EMBEDDED
 245         depends on TOUCHSCREEN_USB_COMPOSITE
 246
 247 config TOUCHSCREEN_USB_IRTOUCH
 248         default y
 249         bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
 250         depends on TOUCHSCREEN_USB_COMPOSITE
 251
 252 config TOUCHSCREEN_USB_IDEALTEK
 253         default y
 254         bool "IdealTEK URTC1000 device support" if EMBEDDED
 255         depends on TOUCHSCREEN_USB_COMPOSITE
 256
 257 endif