2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
16 depends on INPUT && OF
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CY8CTMG110
144 tristate "cy8ctmg110 touchscreen"
148 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
153 To compile this driver as a module, choose M here: the
154 module will be called cy8ctmg110_ts.
156 config TOUCHSCREEN_CYTTSP_CORE
157 tristate "Cypress TTSP touchscreen"
159 Say Y here if you have a touchscreen using controller from
160 the Cypress TrueTouch(tm) Standard Product family connected
161 to your system. You will also need to select appropriate
162 bus connection below.
166 To compile this driver as a module, choose M here: the
167 module will be called cyttsp_core.
169 config TOUCHSCREEN_CYTTSP_I2C
170 tristate "support I2C bus connection"
171 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
173 Say Y here if the touchscreen is connected via I2C bus.
175 To compile this driver as a module, choose M here: the
176 module will be called cyttsp_i2c.
178 config TOUCHSCREEN_CYTTSP_SPI
179 tristate "support SPI bus connection"
180 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
182 Say Y here if the touchscreen is connected via SPI bus.
184 To compile this driver as a module, choose M here: the
185 module will be called cyttsp_spi.
187 config TOUCHSCREEN_CYTTSP4_CORE
188 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
190 Core driver for Cypress TrueTouch(tm) Standard Product
191 Generation4 touchscreen controllers.
193 Say Y here if you have a Cypress Gen4 touchscreen.
197 To compile this driver as a module, choose M here.
199 config TOUCHSCREEN_CYTTSP4_I2C
200 tristate "support I2C bus connection"
201 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
203 Say Y here if the touchscreen is connected via I2C bus.
205 To compile this driver as a module, choose M here: the
206 module will be called cyttsp4_i2c.
208 config TOUCHSCREEN_CYTTSP4_SPI
209 tristate "support SPI bus connection"
210 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
212 Say Y here if the touchscreen is connected via SPI bus.
214 To compile this driver as a module, choose M here: the
215 module will be called cyttsp4_spi.
217 config TOUCHSCREEN_DA9034
218 tristate "Touchscreen support for Dialog Semiconductor DA9034"
219 depends on PMIC_DA903X
222 Say Y here to enable the support for the touchscreen found
223 on Dialog Semiconductor DA9034 PMIC.
227 To compile this driver as a module, choose M here: the
228 module will be called da9034-ts.
230 config TOUCHSCREEN_DA9052
231 tristate "Dialog DA9052/DA9053 TSI"
232 depends on PMIC_DA9052
234 Say Y here to support the touchscreen found on Dialog Semiconductor
235 DA9052-BC and DA9053-AA/Bx PMICs.
239 To compile this driver as a module, choose M here: the
240 module will be called da9052_tsi.
242 config TOUCHSCREEN_DYNAPRO
243 tristate "Dynapro serial touchscreen"
246 Say Y here if you have a Dynapro serial touchscreen connected to
251 To compile this driver as a module, choose M here: the
252 module will be called dynapro.
254 config TOUCHSCREEN_HAMPSHIRE
255 tristate "Hampshire serial touchscreen"
258 Say Y here if you have a Hampshire serial touchscreen connected to
263 To compile this driver as a module, choose M here: the
264 module will be called hampshire.
266 config TOUCHSCREEN_EETI
267 tristate "EETI touchscreen panel support"
270 Say Y here to enable support for I2C connected EETI touch panels.
272 To compile this driver as a module, choose M here: the
273 module will be called eeti_ts.
275 config TOUCHSCREEN_EGALAX
276 tristate "EETI eGalax multi-touch panel support"
279 Say Y here to enable support for I2C connected EETI
280 eGalax multi-touch panels.
282 To compile this driver as a module, choose M here: the
283 module will be called egalax_ts.
285 config TOUCHSCREEN_FUJITSU
286 tristate "Fujitsu serial touchscreen"
289 Say Y here if you have the Fujitsu touchscreen (such as one
290 installed in Lifebook P series laptop) connected to your
295 To compile this driver as a module, choose M here: the
296 module will be called fujitsu-ts.
298 config TOUCHSCREEN_GOODIX
299 tristate "Goodix I2C touchscreen"
300 depends on I2C && ACPI
302 Say Y here if you have the Goodix touchscreen (such as one
303 installed in Onda v975w tablets) connected to your
308 To compile this driver as a module, choose M here: the
309 module will be called goodix.
311 config TOUCHSCREEN_ILI210X
312 tristate "Ilitek ILI210X based touchscreen"
315 Say Y here if you have a ILI210X based touchscreen
316 controller. This driver supports models ILI2102,
317 ILI2102s, ILI2103, ILI2103s and ILI2105.
318 Such kind of chipsets can be found in Amazon Kindle Fire
323 To compile this driver as a module, choose M here: the
324 module will be called ili210x.
326 config TOUCHSCREEN_S3C2410
327 tristate "Samsung S3C2410/generic touchscreen input driver"
328 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
331 Say Y here if you have the s3c2410 touchscreen.
335 To compile this driver as a module, choose M here: the
336 module will be called s3c2410_ts.
338 config TOUCHSCREEN_GUNZE
339 tristate "Gunze AHL-51S touchscreen"
342 Say Y here if you have the Gunze AHL-51 touchscreen connected to
347 To compile this driver as a module, choose M here: the
348 module will be called gunze.
350 config TOUCHSCREEN_ELAN
351 tristate "Elan eKTH I2C touchscreen"
354 Say Y here if you have an Elan eKTH I2C touchscreen
355 connected to your system.
359 To compile this driver as a module, choose M here: the
360 module will be called elants_i2c.
362 config TOUCHSCREEN_ELO
363 tristate "Elo serial touchscreens"
366 Say Y here if you have an Elo serial touchscreen connected to
371 To compile this driver as a module, choose M here: the
372 module will be called elo.
374 config TOUCHSCREEN_WACOM_W8001
375 tristate "Wacom W8001 penabled serial touchscreen"
378 Say Y here if you have an Wacom W8001 penabled serial touchscreen
379 connected to your system.
383 To compile this driver as a module, choose M here: the
384 module will be called wacom_w8001.
386 config TOUCHSCREEN_WACOM_I2C
387 tristate "Wacom Tablet support (I2C)"
390 Say Y here if you want to use the I2C version of the Wacom
395 To compile this driver as a module, choose M here: the module
396 will be called wacom_i2c.
398 config TOUCHSCREEN_LPC32XX
399 tristate "LPC32XX touchscreen controller"
400 depends on ARCH_LPC32XX
402 Say Y here if you have a LPC32XX device and want
403 to support the built-in touchscreen.
405 To compile this driver as a module, choose M here: the
406 module will be called lpc32xx_ts.
408 config TOUCHSCREEN_MAX11801
409 tristate "MAX11801 based touchscreens"
412 Say Y here if you have a MAX11801 based touchscreen
417 To compile this driver as a module, choose M here: the
418 module will be called max11801_ts.
420 config TOUCHSCREEN_MCS5000
421 tristate "MELFAS MCS-5000 touchscreen"
424 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
429 To compile this driver as a module, choose M here: the
430 module will be called mcs5000_ts.
432 config TOUCHSCREEN_MMS114
433 tristate "MELFAS MMS114 touchscreen"
436 Say Y here if you have the MELFAS MMS114 touchscreen controller
441 To compile this driver as a module, choose M here: the
442 module will be called mms114.
444 config TOUCHSCREEN_MTOUCH
445 tristate "MicroTouch serial touchscreens"
448 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
453 To compile this driver as a module, choose M here: the
454 module will be called mtouch.
456 config TOUCHSCREEN_INEXIO
457 tristate "iNexio serial touchscreens"
460 Say Y here if you have an iNexio serial touchscreen connected to
465 To compile this driver as a module, choose M here: the
466 module will be called inexio.
468 config TOUCHSCREEN_INTEL_MID
469 tristate "Intel MID platform resistive touchscreen"
470 depends on INTEL_SCU_IPC
472 Say Y here if you have a Intel MID based touchscreen in
477 To compile this driver as a module, choose M here: the
478 module will be called intel_mid_touch.
480 config TOUCHSCREEN_MK712
481 tristate "ICS MicroClock MK712 touchscreen"
483 Say Y here if you have the ICS MicroClock MK712 touchscreen
484 controller chip in your system.
488 To compile this driver as a module, choose M here: the
489 module will be called mk712.
491 config TOUCHSCREEN_HP600
492 tristate "HP Jornada 6xx touchscreen"
493 depends on SH_HP6XX && SH_ADC
495 Say Y here if you have a HP Jornada 620/660/680/690 and want to
496 support the built-in touchscreen.
498 To compile this driver as a module, choose M here: the
499 module will be called hp680_ts_input.
501 config TOUCHSCREEN_HP7XX
502 tristate "HP Jornada 7xx touchscreen"
503 depends on SA1100_JORNADA720_SSP
505 Say Y here if you have a HP Jornada 710/720/728 and want
506 to support the built-in touchscreen.
508 To compile this driver as a module, choose M here: the
509 module will be called jornada720_ts.
511 config TOUCHSCREEN_IPAQ_MICRO
512 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
513 depends on MFD_IPAQ_MICRO
515 Say Y here to enable support for the touchscreen attached to
516 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
520 To compile this driver as a module, choose M here: the
521 module will be called ipaq-micro-ts.
523 config TOUCHSCREEN_HTCPEN
524 tristate "HTC Shift X9500 touchscreen"
527 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
528 Clio / Shangrila and want to support the built-in touchscreen.
532 To compile this driver as a module, choose M here: the
533 module will be called htcpen.
535 config TOUCHSCREEN_PENMOUNT
536 tristate "Penmount serial touchscreen"
539 Say Y here if you have a Penmount serial touchscreen connected to
544 To compile this driver as a module, choose M here: the
545 module will be called penmount.
547 config TOUCHSCREEN_EDT_FT5X06
548 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
551 Say Y here if you have an EDT "Polytouch" touchscreen based
552 on the FocalTech FT5x06 family of controllers connected to
557 To compile this driver as a module, choose M here: the
558 module will be called edt-ft5x06.
560 config TOUCHSCREEN_MIGOR
561 tristate "Renesas MIGO-R touchscreen"
562 depends on SH_MIGOR && I2C
564 Say Y here to enable MIGO-R touchscreen support.
568 To compile this driver as a module, choose M here: the
569 module will be called migor_ts.
571 config TOUCHSCREEN_TOUCHRIGHT
572 tristate "Touchright serial touchscreen"
575 Say Y here if you have a Touchright serial touchscreen connected to
580 To compile this driver as a module, choose M here: the
581 module will be called touchright.
583 config TOUCHSCREEN_TOUCHWIN
584 tristate "Touchwin serial touchscreen"
587 Say Y here if you have a Touchwin serial touchscreen connected to
592 To compile this driver as a module, choose M here: the
593 module will be called touchwin.
595 config TOUCHSCREEN_TI_AM335X_TSC
596 tristate "TI Touchscreen Interface"
597 depends on MFD_TI_AM335X_TSCADC
599 Say Y here if you have 4/5/8 wire touchscreen controller
600 to be connected to the ADC controller on your TI AM335x SoC.
604 To compile this driver as a module, choose M here: the
605 module will be called ti_am335x_tsc.
607 config TOUCHSCREEN_UCB1400
608 tristate "Philips UCB1400 touchscreen"
610 depends on UCB1400_CORE
612 This enables support for the Philips UCB1400 touchscreen interface.
613 The UCB1400 is an AC97 audio codec. The touchscreen interface
614 will be initialized only after the ALSA subsystem has been
615 brought up and the UCB1400 detected. You therefore have to
616 configure ALSA support as well (either built-in or modular,
617 independently of whether this driver is itself built-in or
618 modular) for this driver to work.
620 To compile this driver as a module, choose M here: the
621 module will be called ucb1400_ts.
623 config TOUCHSCREEN_PIXCIR
624 tristate "PIXCIR I2C touchscreens"
627 Say Y here if you have a pixcir i2c touchscreen
632 To compile this driver as a module, choose M here: the
633 module will be called pixcir_i2c_ts.
635 config TOUCHSCREEN_WM831X
636 tristate "Support for WM831x touchscreen controllers"
637 depends on MFD_WM831X
639 This enables support for the touchscreen controller on the WM831x
642 To compile this driver as a module, choose M here: the
643 module will be called wm831x-ts.
645 config TOUCHSCREEN_WM97XX
646 tristate "Support for WM97xx AC97 touchscreen controllers"
649 Say Y here if you have a Wolfson Microelectronics WM97xx
650 touchscreen connected to your system. Note that this option
651 only enables core driver, you will also need to select
652 support for appropriate chip below.
656 To compile this driver as a module, choose M here: the
657 module will be called wm97xx-ts.
659 config TOUCHSCREEN_WM9705
660 bool "WM9705 Touchscreen interface support"
661 depends on TOUCHSCREEN_WM97XX
664 Say Y here to enable support for the Wolfson Microelectronics
665 WM9705 touchscreen controller.
667 config TOUCHSCREEN_WM9712
668 bool "WM9712 Touchscreen interface support"
669 depends on TOUCHSCREEN_WM97XX
672 Say Y here to enable support for the Wolfson Microelectronics
673 WM9712 touchscreen controller.
675 config TOUCHSCREEN_WM9713
676 bool "WM9713 Touchscreen interface support"
677 depends on TOUCHSCREEN_WM97XX
680 Say Y here to enable support for the Wolfson Microelectronics
681 WM9713 touchscreen controller.
683 config TOUCHSCREEN_WM97XX_ATMEL
684 tristate "WM97xx Atmel accelerated touch"
685 depends on TOUCHSCREEN_WM97XX && AVR32
687 Say Y here for support for streaming mode with WM97xx touchscreens
688 on Atmel AT91 or AVR32 systems with an AC97C module.
690 Be aware that this will use channel B in the controller for
691 streaming data, this must not conflict with other AC97C drivers.
695 To compile this driver as a module, choose M here: the module will
696 be called atmel-wm97xx.
698 config TOUCHSCREEN_WM97XX_MAINSTONE
699 tristate "WM97xx Mainstone/Palm accelerated touch"
700 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
702 Say Y here for support for streaming mode with WM97xx touchscreens
703 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
707 To compile this driver as a module, choose M here: the
708 module will be called mainstone-wm97xx.
710 config TOUCHSCREEN_WM97XX_ZYLONITE
711 tristate "Zylonite accelerated touch"
712 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
713 select TOUCHSCREEN_WM9713
715 Say Y here for support for streaming mode with the touchscreen
720 To compile this driver as a module, choose M here: the
721 module will be called zylonite-wm97xx.
723 config TOUCHSCREEN_USB_COMPOSITE
724 tristate "USB Touchscreen Driver"
725 depends on USB_ARCH_HAS_HCD
728 USB Touchscreen driver for:
729 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
730 - PanJit TouchSet USB
731 - 3M MicroTouch USB (EX II series)
733 - some other eTurboTouch
736 - IRTOUCHSYSTEMS/UNITOP
738 - GoTop Super_Q2/GogoPen/PenPower tablets
739 - JASTEC USB Touch Controller/DigiTech DTR-02U
740 - Zytronic controllers
741 - Elo TouchSystems 2700 IntelliTouch
742 - EasyTouch USB Touch Controller from Data Modul
743 - e2i (Mimo monitors)
745 Have a look at <http://linux.chapter7.ch/touchkit/> for
746 a usage description and the required user-space stuff.
748 To compile this driver as a module, choose M here: the
749 module will be called usbtouchscreen.
751 config TOUCHSCREEN_MC13783
752 tristate "Freescale MC13783 touchscreen input driver"
753 depends on MFD_MC13XXX
755 Say Y here if you have an Freescale MC13783 PMIC on your
756 board and want to use its touchscreen
760 To compile this driver as a module, choose M here: the
761 module will be called mc13783_ts.
763 config TOUCHSCREEN_USB_EGALAX
765 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
766 depends on TOUCHSCREEN_USB_COMPOSITE
768 config TOUCHSCREEN_USB_PANJIT
770 bool "PanJit device support" if EXPERT
771 depends on TOUCHSCREEN_USB_COMPOSITE
773 config TOUCHSCREEN_USB_3M
775 bool "3M/Microtouch EX II series device support" if EXPERT
776 depends on TOUCHSCREEN_USB_COMPOSITE
778 config TOUCHSCREEN_USB_ITM
780 bool "ITM device support" if EXPERT
781 depends on TOUCHSCREEN_USB_COMPOSITE
783 config TOUCHSCREEN_USB_ETURBO
785 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
786 depends on TOUCHSCREEN_USB_COMPOSITE
788 config TOUCHSCREEN_USB_GUNZE
790 bool "Gunze AHL61 device support" if EXPERT
791 depends on TOUCHSCREEN_USB_COMPOSITE
793 config TOUCHSCREEN_USB_DMC_TSC10
795 bool "DMC TSC-10/25 device support" if EXPERT
796 depends on TOUCHSCREEN_USB_COMPOSITE
798 config TOUCHSCREEN_USB_IRTOUCH
800 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
801 depends on TOUCHSCREEN_USB_COMPOSITE
803 config TOUCHSCREEN_USB_IDEALTEK
805 bool "IdealTEK URTC1000 device support" if EXPERT
806 depends on TOUCHSCREEN_USB_COMPOSITE
808 config TOUCHSCREEN_USB_GENERAL_TOUCH
810 bool "GeneralTouch Touchscreen device support" if EXPERT
811 depends on TOUCHSCREEN_USB_COMPOSITE
813 config TOUCHSCREEN_USB_GOTOP
815 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
816 depends on TOUCHSCREEN_USB_COMPOSITE
818 config TOUCHSCREEN_USB_JASTEC
820 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
821 depends on TOUCHSCREEN_USB_COMPOSITE
823 config TOUCHSCREEN_USB_ELO
825 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
826 depends on TOUCHSCREEN_USB_COMPOSITE
828 config TOUCHSCREEN_USB_E2I
830 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
831 depends on TOUCHSCREEN_USB_COMPOSITE
833 config TOUCHSCREEN_USB_ZYTRONIC
835 bool "Zytronic controller" if EXPERT
836 depends on TOUCHSCREEN_USB_COMPOSITE
838 config TOUCHSCREEN_USB_ETT_TC45USB
840 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
841 depends on TOUCHSCREEN_USB_COMPOSITE
843 config TOUCHSCREEN_USB_NEXIO
845 bool "NEXIO/iNexio device support" if EXPERT
846 depends on TOUCHSCREEN_USB_COMPOSITE
848 config TOUCHSCREEN_USB_EASYTOUCH
850 bool "EasyTouch USB Touch controller device support" if EMBEDDED
851 depends on TOUCHSCREEN_USB_COMPOSITE
853 Say Y here if you have an EasyTouch USB Touch controller.
856 config TOUCHSCREEN_TOUCHIT213
857 tristate "Sahara TouchIT-213 touchscreen"
860 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
864 To compile this driver as a module, choose M here: the
865 module will be called touchit213.
867 config TOUCHSCREEN_TSC_SERIO
868 tristate "TSC-10/25/40 serial touchscreen support"
871 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
876 To compile this driver as a module, choose M here: the
877 module will be called tsc40.
879 config TOUCHSCREEN_TSC2005
880 tristate "TSC2005 based touchscreens"
881 depends on SPI_MASTER
883 Say Y here if you have a TSC2005 based touchscreen.
887 To compile this driver as a module, choose M here: the
888 module will be called tsc2005.
890 config TOUCHSCREEN_TSC2007
891 tristate "TSC2007 based touchscreens"
894 Say Y here if you have a TSC2007 based touchscreen.
898 To compile this driver as a module, choose M here: the
899 module will be called tsc2007.
901 config TOUCHSCREEN_W90X900
902 tristate "W90P910 touchscreen driver"
903 depends on ARCH_W90X900
905 Say Y here if you have a W90P910 based touchscreen.
907 To compile this driver as a module, choose M here: the
908 module will be called w90p910_ts.
910 config TOUCHSCREEN_PCAP
911 tristate "Motorola PCAP touchscreen"
914 Say Y here if you have a Motorola EZX telephone and
915 want to enable support for the built-in touchscreen.
917 To compile this driver as a module, choose M here: the
918 module will be called pcap_ts.
920 config TOUCHSCREEN_ST1232
921 tristate "Sitronix ST1232 touchscreen controllers"
924 Say Y here if you want to support Sitronix ST1232
925 touchscreen controller.
929 To compile this driver as a module, choose M here: the
930 module will be called st1232_ts.
932 config TOUCHSCREEN_STMPE
933 tristate "STMicroelectronics STMPE touchscreens"
936 Say Y here if you want support for STMicroelectronics
937 STMPE touchscreen controllers.
939 To compile this driver as a module, choose M here: the
940 module will be called stmpe-ts.
942 config TOUCHSCREEN_SUN4I
943 tristate "Allwinner sun4i resistive touchscreen controller support"
944 depends on ARCH_SUNXI || COMPILE_TEST
946 depends on THERMAL || !THERMAL_OF
948 This selects support for the resistive touchscreen controller
949 found on Allwinner sunxi SoCs.
951 To compile this driver as a module, choose M here: the
952 module will be called sun4i-ts.
954 config TOUCHSCREEN_SUR40
955 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
959 Say Y here if you want support for the Samsung SUR40 touchscreen
960 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
962 To compile this driver as a module, choose M here: the
963 module will be called sur40.
965 config TOUCHSCREEN_TPS6507X
966 tristate "TPS6507x based touchscreens"
970 Say Y here if you have a TPS6507x based touchscreen
975 To compile this driver as a module, choose M here: the
976 module will be called tps6507x_ts.
978 config TOUCHSCREEN_ZFORCE
979 tristate "Neonode zForce infrared touchscreens"
983 Say Y here if you have a touchscreen using the zforce
984 infraread technology from Neonode.
988 To compile this driver as a module, choose M here: the
989 module will be called zforce_ts.