drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config OF_TOUCHSCREEN
  15         def_tristate INPUT
  16         depends on INPUT && OF
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_AUO_PIXCIR
 119         tristate "AUO in-cell touchscreen using Pixcir ICs"
 120         depends on I2C
 121         depends on GPIOLIB
 122         help
 123           Say Y here if you have a AUO display with in-cell touchscreen
 124           using Pixcir ICs.
 125
 126           If unsure, say N.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called auo-pixcir-ts.
 130
 131 config TOUCHSCREEN_BU21013
 132         tristate "BU21013 based touch panel controllers"
 133         depends on I2C
 134         help
 135           Say Y here if you have a bu21013 touchscreen connected to
 136           your system.
 137
 138           If unsure, say N.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called bu21013_ts.
 142
 143 config TOUCHSCREEN_CY8CTMG110
 144         tristate "cy8ctmg110 touchscreen"
 145         depends on I2C
 146         depends on GPIOLIB
 147         help
 148           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 149           an AAVA device.
 150
 151           If unsure, say N.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called cy8ctmg110_ts.
 155
 156 config TOUCHSCREEN_CYTTSP_CORE
 157         tristate "Cypress TTSP touchscreen"
 158         help
 159           Say Y here if you have a touchscreen using controller from
 160           the Cypress TrueTouch(tm) Standard Product family connected
 161           to your system. You will also need to select appropriate
 162           bus connection below.
 163
 164           If unsure, say N.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called cyttsp_core.
 168
 169 config TOUCHSCREEN_CYTTSP_I2C
 170         tristate "support I2C bus connection"
 171         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 172         help
 173           Say Y here if the touchscreen is connected via I2C bus.
 174
 175           To compile this driver as a module, choose M here: the
 176           module will be called cyttsp_i2c.
 177
 178 config TOUCHSCREEN_CYTTSP_SPI
 179         tristate "support SPI bus connection"
 180         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 181         help
 182           Say Y here if the touchscreen is connected via SPI bus.
 183
 184           To compile this driver as a module, choose M here: the
 185           module will be called cyttsp_spi.
 186
 187 config TOUCHSCREEN_CYTTSP4_CORE
 188         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 189         help
 190           Core driver for Cypress TrueTouch(tm) Standard Product
 191           Generation4 touchscreen controllers.
 192
 193           Say Y here if you have a Cypress Gen4 touchscreen.
 194
 195           If unsure, say N.
 196
 197           To compile this driver as a module, choose M here.
 198
 199 config TOUCHSCREEN_CYTTSP4_I2C
 200         tristate "support I2C bus connection"
 201         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 202         help
 203           Say Y here if the touchscreen is connected via I2C bus.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called cyttsp4_i2c.
 207
 208 config TOUCHSCREEN_CYTTSP4_SPI
 209         tristate "support SPI bus connection"
 210         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 211         help
 212           Say Y here if the touchscreen is connected via SPI bus.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called cyttsp4_spi.
 216
 217 config TOUCHSCREEN_DA9034
 218         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 219         depends on PMIC_DA903X
 220         default y
 221         help
 222           Say Y here to enable the support for the touchscreen found
 223           on Dialog Semiconductor DA9034 PMIC.
 224
 225           If unsure, say N.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called da9034-ts.
 229
 230 config TOUCHSCREEN_DA9052
 231         tristate "Dialog DA9052/DA9053 TSI"
 232         depends on PMIC_DA9052
 233         help
 234           Say Y here to support the touchscreen found on Dialog Semiconductor
 235           DA9052-BC and DA9053-AA/Bx PMICs.
 236
 237           If unsure, say N.
 238
 239           To compile this driver as a module, choose M here: the
 240           module will be called da9052_tsi.
 241
 242 config TOUCHSCREEN_DYNAPRO
 243         tristate "Dynapro serial touchscreen"
 244         select SERIO
 245         help
 246           Say Y here if you have a Dynapro serial touchscreen connected to
 247           your system.
 248
 249           If unsure, say N.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called dynapro.
 253
 254 config TOUCHSCREEN_HAMPSHIRE
 255         tristate "Hampshire serial touchscreen"
 256         select SERIO
 257         help
 258           Say Y here if you have a Hampshire serial touchscreen connected to
 259           your system.
 260
 261           If unsure, say N.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called hampshire.
 265
 266 config TOUCHSCREEN_EETI
 267         tristate "EETI touchscreen panel support"
 268         depends on I2C
 269         help
 270           Say Y here to enable support for I2C connected EETI touch panels.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called eeti_ts.
 274
 275 config TOUCHSCREEN_EGALAX
 276         tristate "EETI eGalax multi-touch panel support"
 277         depends on I2C && OF
 278         help
 279           Say Y here to enable support for I2C connected EETI
 280           eGalax multi-touch panels.
 281
 282           To compile this driver as a module, choose M here: the
 283           module will be called egalax_ts.
 284
 285 config TOUCHSCREEN_FUJITSU
 286         tristate "Fujitsu serial touchscreen"
 287         select SERIO
 288         help
 289           Say Y here if you have the Fujitsu touchscreen (such as one
 290           installed in Lifebook P series laptop) connected to your
 291           system.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called fujitsu-ts.
 297
 298 config TOUCHSCREEN_ILI210X
 299         tristate "Ilitek ILI210X based touchscreen"
 300         depends on I2C
 301         help
 302           Say Y here if you have a ILI210X based touchscreen
 303           controller. This driver supports models ILI2102,
 304           ILI2102s, ILI2103, ILI2103s and ILI2105.
 305           Such kind of chipsets can be found in Amazon Kindle Fire
 306           touchscreens.
 307
 308           If unsure, say N.
 309
 310           To compile this driver as a module, choose M here: the
 311           module will be called ili210x.
 312
 313 config TOUCHSCREEN_S3C2410
 314         tristate "Samsung S3C2410/generic touchscreen input driver"
 315         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 316         select S3C_ADC
 317         help
 318           Say Y here if you have the s3c2410 touchscreen.
 319
 320           If unsure, say N.
 321
 322           To compile this driver as a module, choose M here: the
 323           module will be called s3c2410_ts.
 324
 325 config TOUCHSCREEN_GUNZE
 326         tristate "Gunze AHL-51S touchscreen"
 327         select SERIO
 328         help
 329           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 330           your system.
 331
 332           If unsure, say N.
 333
 334           To compile this driver as a module, choose M here: the
 335           module will be called gunze.
 336
 337 config TOUCHSCREEN_ELO
 338         tristate "Elo serial touchscreens"
 339         select SERIO
 340         help
 341           Say Y here if you have an Elo serial touchscreen connected to
 342           your system.
 343
 344           If unsure, say N.
 345
 346           To compile this driver as a module, choose M here: the
 347           module will be called elo.
 348
 349 config TOUCHSCREEN_WACOM_W8001
 350         tristate "Wacom W8001 penabled serial touchscreen"
 351         select SERIO
 352         help
 353           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 354           connected to your system.
 355
 356           If unsure, say N.
 357
 358           To compile this driver as a module, choose M here: the
 359           module will be called wacom_w8001.
 360
 361 config TOUCHSCREEN_WACOM_I2C
 362         tristate "Wacom Tablet support (I2C)"
 363         depends on I2C
 364         help
 365           Say Y here if you want to use the I2C version of the Wacom
 366           Pen Tablet.
 367
 368           If unsure, say N.
 369
 370           To compile this driver as a module, choose M here: the module
 371           will be called wacom_i2c.
 372
 373 config TOUCHSCREEN_LPC32XX
 374         tristate "LPC32XX touchscreen controller"
 375         depends on ARCH_LPC32XX
 376         help
 377           Say Y here if you have a LPC32XX device and want
 378           to support the built-in touchscreen.
 379
 380           To compile this driver as a module, choose M here: the
 381           module will be called lpc32xx_ts.
 382
 383 config TOUCHSCREEN_MAX11801
 384         tristate "MAX11801 based touchscreens"
 385         depends on I2C
 386         help
 387           Say Y here if you have a MAX11801 based touchscreen
 388           controller.
 389
 390           If unsure, say N.
 391
 392           To compile this driver as a module, choose M here: the
 393           module will be called max11801_ts.
 394
 395 config TOUCHSCREEN_MCS5000
 396         tristate "MELFAS MCS-5000 touchscreen"
 397         depends on I2C
 398         help
 399           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 400           chip in your system.
 401
 402           If unsure, say N.
 403
 404           To compile this driver as a module, choose M here: the
 405           module will be called mcs5000_ts.
 406
 407 config TOUCHSCREEN_MMS114
 408         tristate "MELFAS MMS114 touchscreen"
 409         depends on I2C
 410         help
 411           Say Y here if you have the MELFAS MMS114 touchscreen controller
 412           chip in your system.
 413
 414           If unsure, say N.
 415
 416           To compile this driver as a module, choose M here: the
 417           module will be called mms114.
 418
 419 config TOUCHSCREEN_MTOUCH
 420         tristate "MicroTouch serial touchscreens"
 421         select SERIO
 422         help
 423           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 424           your system.
 425
 426           If unsure, say N.
 427
 428           To compile this driver as a module, choose M here: the
 429           module will be called mtouch.
 430
 431 config TOUCHSCREEN_INEXIO
 432         tristate "iNexio serial touchscreens"
 433         select SERIO
 434         help
 435           Say Y here if you have an iNexio serial touchscreen connected to
 436           your system.
 437
 438           If unsure, say N.
 439
 440           To compile this driver as a module, choose M here: the
 441           module will be called inexio.
 442
 443 config TOUCHSCREEN_INTEL_MID
 444         tristate "Intel MID platform resistive touchscreen"
 445         depends on INTEL_SCU_IPC
 446         help
 447           Say Y here if you have a Intel MID based touchscreen in
 448           your system.
 449
 450           If unsure, say N.
 451
 452           To compile this driver as a module, choose M here: the
 453           module will be called intel_mid_touch.
 454
 455 config TOUCHSCREEN_MK712
 456         tristate "ICS MicroClock MK712 touchscreen"
 457         help
 458           Say Y here if you have the ICS MicroClock MK712 touchscreen
 459           controller chip in your system.
 460
 461           If unsure, say N.
 462
 463           To compile this driver as a module, choose M here: the
 464           module will be called mk712.
 465
 466 config TOUCHSCREEN_HP600
 467         tristate "HP Jornada 6xx touchscreen"
 468         depends on SH_HP6XX && SH_ADC
 469         help
 470           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 471           support the built-in touchscreen.
 472
 473           To compile this driver as a module, choose M here: the
 474           module will be called hp680_ts_input.
 475
 476 config TOUCHSCREEN_HP7XX
 477         tristate "HP Jornada 7xx touchscreen"
 478         depends on SA1100_JORNADA720_SSP
 479         help
 480           Say Y here if you have a HP Jornada 710/720/728 and want
 481           to support the built-in touchscreen.
 482
 483           To compile this driver as a module, choose M here: the
 484           module will be called jornada720_ts.
 485
 486 config TOUCHSCREEN_IPAQ_MICRO
 487         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 488         depends on MFD_IPAQ_MICRO
 489         help
 490           Say Y here to enable support for the touchscreen attached to
 491           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 492
 493           If unsure, say N.
 494
 495           To compile this driver as a module, choose M here: the
 496           module will be called ipaq-micro-ts.
 497
 498 config TOUCHSCREEN_HTCPEN
 499         tristate "HTC Shift X9500 touchscreen"
 500         depends on ISA
 501         help
 502           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 503           Clio / Shangrila and want to support the built-in touchscreen.
 504
 505           If unsure, say N.
 506
 507           To compile this driver as a module, choose M here: the
 508           module will be called htcpen.
 509
 510 config TOUCHSCREEN_PENMOUNT
 511         tristate "Penmount serial touchscreen"
 512         select SERIO
 513         help
 514           Say Y here if you have a Penmount serial touchscreen connected to
 515           your system.
 516
 517           If unsure, say N.
 518
 519           To compile this driver as a module, choose M here: the
 520           module will be called penmount.
 521
 522 config TOUCHSCREEN_EDT_FT5X06
 523         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 524         depends on I2C
 525         help
 526           Say Y here if you have an EDT "Polytouch" touchscreen based
 527           on the FocalTech FT5x06 family of controllers connected to
 528           your system.
 529
 530           If unsure, say N.
 531
 532           To compile this driver as a module, choose M here: the
 533           module will be called edt-ft5x06.
 534
 535 config TOUCHSCREEN_MIGOR
 536         tristate "Renesas MIGO-R touchscreen"
 537         depends on SH_MIGOR && I2C
 538         help
 539           Say Y here to enable MIGO-R touchscreen support.
 540
 541           If unsure, say N.
 542
 543           To compile this driver as a module, choose M here: the
 544           module will be called migor_ts.
 545
 546 config TOUCHSCREEN_TOUCHRIGHT
 547         tristate "Touchright serial touchscreen"
 548         select SERIO
 549         help
 550           Say Y here if you have a Touchright serial touchscreen connected to
 551           your system.
 552
 553           If unsure, say N.
 554
 555           To compile this driver as a module, choose M here: the
 556           module will be called touchright.
 557
 558 config TOUCHSCREEN_TOUCHWIN
 559         tristate "Touchwin serial touchscreen"
 560         select SERIO
 561         help
 562           Say Y here if you have a Touchwin serial touchscreen connected to
 563           your system.
 564
 565           If unsure, say N.
 566
 567           To compile this driver as a module, choose M here: the
 568           module will be called touchwin.
 569
 570 config TOUCHSCREEN_TI_AM335X_TSC
 571         tristate "TI Touchscreen Interface"
 572         depends on MFD_TI_AM335X_TSCADC
 573         help
 574           Say Y here if you have 4/5/8 wire touchscreen controller
 575           to be connected to the ADC controller on your TI AM335x SoC.
 576
 577           If unsure, say N.
 578
 579           To compile this driver as a module, choose M here: the
 580           module will be called ti_am335x_tsc.
 581
 582 config TOUCHSCREEN_UCB1400
 583         tristate "Philips UCB1400 touchscreen"
 584         depends on AC97_BUS
 585         depends on UCB1400_CORE
 586         help
 587           This enables support for the Philips UCB1400 touchscreen interface.
 588           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 589           will be initialized only after the ALSA subsystem has been
 590           brought up and the UCB1400 detected.  You therefore have to
 591           configure ALSA support as well (either built-in or modular,
 592           independently of whether this driver is itself built-in or
 593           modular) for this driver to work.
 594
 595           To compile this driver as a module, choose M here: the
 596           module will be called ucb1400_ts.
 597
 598 config TOUCHSCREEN_PIXCIR
 599         tristate "PIXCIR I2C touchscreens"
 600         depends on I2C
 601         help
 602           Say Y here if you have a pixcir i2c touchscreen
 603           controller.
 604
 605           If unsure, say N.
 606
 607           To compile this driver as a module, choose M here: the
 608           module will be called pixcir_i2c_ts.
 609
 610 config TOUCHSCREEN_WM831X
 611         tristate "Support for WM831x touchscreen controllers"
 612         depends on MFD_WM831X
 613         help
 614           This enables support for the touchscreen controller on the WM831x
 615           series of PMICs.
 616
 617           To compile this driver as a module, choose M here: the
 618           module will be called wm831x-ts.
 619
 620 config TOUCHSCREEN_WM97XX
 621         tristate "Support for WM97xx AC97 touchscreen controllers"
 622         depends on AC97_BUS
 623         help
 624           Say Y here if you have a Wolfson Microelectronics WM97xx
 625           touchscreen connected to your system. Note that this option
 626           only enables core driver, you will also need to select
 627           support for appropriate chip below.
 628
 629           If unsure, say N.
 630
 631           To compile this driver as a module, choose M here: the
 632           module will be called wm97xx-ts.
 633
 634 config TOUCHSCREEN_WM9705
 635         bool "WM9705 Touchscreen interface support"
 636         depends on TOUCHSCREEN_WM97XX
 637         default y
 638         help
 639           Say Y here to enable support for the Wolfson Microelectronics
 640           WM9705 touchscreen controller.
 641
 642 config TOUCHSCREEN_WM9712
 643         bool "WM9712 Touchscreen interface support"
 644         depends on TOUCHSCREEN_WM97XX
 645         default y
 646         help
 647           Say Y here to enable support for the Wolfson Microelectronics
 648           WM9712 touchscreen controller.
 649
 650 config TOUCHSCREEN_WM9713
 651         bool "WM9713 Touchscreen interface support"
 652         depends on TOUCHSCREEN_WM97XX
 653         default y
 654         help
 655           Say Y here to enable support for the Wolfson Microelectronics
 656           WM9713 touchscreen controller.
 657
 658 config TOUCHSCREEN_WM97XX_ATMEL
 659         tristate "WM97xx Atmel accelerated touch"
 660         depends on TOUCHSCREEN_WM97XX && AVR32
 661         help
 662           Say Y here for support for streaming mode with WM97xx touchscreens
 663           on Atmel AT91 or AVR32 systems with an AC97C module.
 664
 665           Be aware that this will use channel B in the controller for
 666           streaming data, this must not conflict with other AC97C drivers.
 667
 668           If unsure, say N.
 669
 670           To compile this driver as a module, choose M here: the module will
 671           be called atmel-wm97xx.
 672
 673 config TOUCHSCREEN_WM97XX_MAINSTONE
 674         tristate "WM97xx Mainstone/Palm accelerated touch"
 675         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 676         help
 677           Say Y here for support for streaming mode with WM97xx touchscreens
 678           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 679
 680           If unsure, say N.
 681
 682           To compile this driver as a module, choose M here: the
 683           module will be called mainstone-wm97xx.
 684
 685 config TOUCHSCREEN_WM97XX_ZYLONITE
 686         tristate "Zylonite accelerated touch"
 687         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 688         select TOUCHSCREEN_WM9713
 689         help
 690           Say Y here for support for streaming mode with the touchscreen
 691           on Zylonite systems.
 692
 693           If unsure, say N.
 694
 695           To compile this driver as a module, choose M here: the
 696           module will be called zylonite-wm97xx.
 697
 698 config TOUCHSCREEN_USB_COMPOSITE
 699         tristate "USB Touchscreen Driver"
 700         depends on USB_ARCH_HAS_HCD
 701         select USB
 702         help
 703           USB Touchscreen driver for:
 704           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 705           - PanJit TouchSet USB
 706           - 3M MicroTouch USB (EX II series)
 707           - ITM
 708           - some other eTurboTouch
 709           - Gunze AHL61
 710           - DMC TSC-10/25
 711           - IRTOUCHSYSTEMS/UNITOP
 712           - IdealTEK URTC1000
 713           - GoTop Super_Q2/GogoPen/PenPower tablets
 714           - JASTEC USB Touch Controller/DigiTech DTR-02U
 715           - Zytronic controllers
 716           - Elo TouchSystems 2700 IntelliTouch
 717           - EasyTouch USB Touch Controller from Data Modul
 718           - e2i (Mimo monitors)
 719
 720           Have a look at <http://linux.chapter7.ch/touchkit/> for
 721           a usage description and the required user-space stuff.
 722
 723           To compile this driver as a module, choose M here: the
 724           module will be called usbtouchscreen.
 725
 726 config TOUCHSCREEN_MC13783
 727         tristate "Freescale MC13783 touchscreen input driver"
 728         depends on MFD_MC13XXX
 729         help
 730           Say Y here if you have an Freescale MC13783 PMIC on your
 731           board and want to use its touchscreen
 732
 733           If unsure, say N.
 734
 735           To compile this driver as a module, choose M here: the
 736           module will be called mc13783_ts.
 737
 738 config TOUCHSCREEN_USB_EGALAX
 739         default y
 740         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 741         depends on TOUCHSCREEN_USB_COMPOSITE
 742
 743 config TOUCHSCREEN_USB_PANJIT
 744         default y
 745         bool "PanJit device support" if EXPERT
 746         depends on TOUCHSCREEN_USB_COMPOSITE
 747
 748 config TOUCHSCREEN_USB_3M
 749         default y
 750         bool "3M/Microtouch EX II series device support" if EXPERT
 751         depends on TOUCHSCREEN_USB_COMPOSITE
 752
 753 config TOUCHSCREEN_USB_ITM
 754         default y
 755         bool "ITM device support" if EXPERT
 756         depends on TOUCHSCREEN_USB_COMPOSITE
 757
 758 config TOUCHSCREEN_USB_ETURBO
 759         default y
 760         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 761         depends on TOUCHSCREEN_USB_COMPOSITE
 762
 763 config TOUCHSCREEN_USB_GUNZE
 764         default y
 765         bool "Gunze AHL61 device support" if EXPERT
 766         depends on TOUCHSCREEN_USB_COMPOSITE
 767
 768 config TOUCHSCREEN_USB_DMC_TSC10
 769         default y
 770         bool "DMC TSC-10/25 device support" if EXPERT
 771         depends on TOUCHSCREEN_USB_COMPOSITE
 772
 773 config TOUCHSCREEN_USB_IRTOUCH
 774         default y
 775         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 776         depends on TOUCHSCREEN_USB_COMPOSITE
 777
 778 config TOUCHSCREEN_USB_IDEALTEK
 779         default y
 780         bool "IdealTEK URTC1000 device support" if EXPERT
 781         depends on TOUCHSCREEN_USB_COMPOSITE
 782
 783 config TOUCHSCREEN_USB_GENERAL_TOUCH
 784         default y
 785         bool "GeneralTouch Touchscreen device support" if EXPERT
 786         depends on TOUCHSCREEN_USB_COMPOSITE
 787
 788 config TOUCHSCREEN_USB_GOTOP
 789         default y
 790         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 791         depends on TOUCHSCREEN_USB_COMPOSITE
 792
 793 config TOUCHSCREEN_USB_JASTEC
 794         default y
 795         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 796         depends on TOUCHSCREEN_USB_COMPOSITE
 797
 798 config TOUCHSCREEN_USB_ELO
 799         default y
 800         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 801         depends on TOUCHSCREEN_USB_COMPOSITE
 802
 803 config TOUCHSCREEN_USB_E2I
 804         default y
 805         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 806         depends on TOUCHSCREEN_USB_COMPOSITE
 807
 808 config TOUCHSCREEN_USB_ZYTRONIC
 809         default y
 810         bool "Zytronic controller" if EXPERT
 811         depends on TOUCHSCREEN_USB_COMPOSITE
 812
 813 config TOUCHSCREEN_USB_ETT_TC45USB
 814         default y
 815         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 816         depends on TOUCHSCREEN_USB_COMPOSITE
 817
 818 config TOUCHSCREEN_USB_NEXIO
 819         default y
 820         bool "NEXIO/iNexio device support" if EXPERT
 821         depends on TOUCHSCREEN_USB_COMPOSITE
 822
 823 config TOUCHSCREEN_USB_EASYTOUCH
 824         default y
 825         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 826         depends on TOUCHSCREEN_USB_COMPOSITE
 827         help
 828           Say Y here if you have an EasyTouch USB Touch controller.
 829           If unsure, say N.
 830
 831 config TOUCHSCREEN_TOUCHIT213
 832         tristate "Sahara TouchIT-213 touchscreen"
 833         select SERIO
 834         help
 835           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 836
 837           If unsure, say N.
 838
 839           To compile this driver as a module, choose M here: the
 840           module will be called touchit213.
 841
 842 config TOUCHSCREEN_TSC_SERIO
 843         tristate "TSC-10/25/40 serial touchscreen support"
 844         select SERIO
 845         help
 846           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 847           to your system.
 848
 849           If unsure, say N.
 850
 851           To compile this driver as a module, choose M here: the
 852           module will be called tsc40.
 853
 854 config TOUCHSCREEN_TSC2005
 855         tristate "TSC2005 based touchscreens"
 856         depends on SPI_MASTER
 857         help
 858           Say Y here if you have a TSC2005 based touchscreen.
 859
 860           If unsure, say N.
 861
 862           To compile this driver as a module, choose M here: the
 863           module will be called tsc2005.
 864
 865 config TOUCHSCREEN_TSC2007
 866         tristate "TSC2007 based touchscreens"
 867         depends on I2C
 868         help
 869           Say Y here if you have a TSC2007 based touchscreen.
 870
 871           If unsure, say N.
 872
 873           To compile this driver as a module, choose M here: the
 874           module will be called tsc2007.
 875
 876 config TOUCHSCREEN_W90X900
 877         tristate "W90P910 touchscreen driver"
 878         depends on ARCH_W90X900
 879         help
 880           Say Y here if you have a W90P910 based touchscreen.
 881
 882           To compile this driver as a module, choose M here: the
 883           module will be called w90p910_ts.
 884
 885 config TOUCHSCREEN_PCAP
 886         tristate "Motorola PCAP touchscreen"
 887         depends on EZX_PCAP
 888         help
 889           Say Y here if you have a Motorola EZX telephone and
 890           want to enable support for the built-in touchscreen.
 891
 892           To compile this driver as a module, choose M here: the
 893           module will be called pcap_ts.
 894
 895 config TOUCHSCREEN_ST1232
 896         tristate "Sitronix ST1232 touchscreen controllers"
 897         depends on I2C
 898         help
 899           Say Y here if you want to support Sitronix ST1232
 900           touchscreen controller.
 901
 902           If unsure, say N.
 903
 904           To compile this driver as a module, choose M here: the
 905           module will be called st1232_ts.
 906
 907 config TOUCHSCREEN_STMPE
 908         tristate "STMicroelectronics STMPE touchscreens"
 909         depends on MFD_STMPE
 910         help
 911           Say Y here if you want support for STMicroelectronics
 912           STMPE touchscreen controllers.
 913
 914           To compile this driver as a module, choose M here: the
 915           module will be called stmpe-ts.
 916
 917 config TOUCHSCREEN_SUN4I
 918         tristate "Allwinner sun4i resistive touchscreen controller support"
 919         depends on ARCH_SUNXI || COMPILE_TEST
 920         depends on HWMON
 921         help
 922           This selects support for the resistive touchscreen controller
 923           found on Allwinner sunxi SoCs.
 924
 925           To compile this driver as a module, choose M here: the
 926           module will be called sun4i-ts.
 927
 928 config TOUCHSCREEN_SUR40
 929         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 930         depends on USB
 931         select INPUT_POLLDEV
 932         help
 933           Say Y here if you want support for the Samsung SUR40 touchscreen
 934           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
 935
 936           To compile this driver as a module, choose M here: the
 937           module will be called sur40.
 938
 939 config TOUCHSCREEN_TPS6507X
 940         tristate "TPS6507x based touchscreens"
 941         depends on I2C
 942         select INPUT_POLLDEV
 943         help
 944           Say Y here if you have a TPS6507x based touchscreen
 945           controller.
 946
 947           If unsure, say N.
 948
 949           To compile this driver as a module, choose M here: the
 950           module will be called tps6507x_ts.
 951
 952 config TOUCHSCREEN_ZFORCE
 953         tristate "Neonode zForce infrared touchscreens"
 954         depends on I2C
 955         depends on GPIOLIB
 956         help
 957           Say Y here if you have a touchscreen using the zforce
 958           infraread technology from Neonode.
 959
 960           If unsure, say N.
 961
 962           To compile this driver as a module, choose M here: the
 963           module will be called zforce_ts.
 964
 965 endif