drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config OF_TOUCHSCREEN
  15         def_tristate INPUT
  16         depends on INPUT && OF
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_AUO_PIXCIR
 119         tristate "AUO in-cell touchscreen using Pixcir ICs"
 120         depends on I2C
 121         depends on GPIOLIB
 122         help
 123           Say Y here if you have a AUO display with in-cell touchscreen
 124           using Pixcir ICs.
 125
 126           If unsure, say N.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called auo-pixcir-ts.
 130
 131 config TOUCHSCREEN_BU21013
 132         tristate "BU21013 based touch panel controllers"
 133         depends on I2C
 134         help
 135           Say Y here if you have a bu21013 touchscreen connected to
 136           your system.
 137
 138           If unsure, say N.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called bu21013_ts.
 142
 143 config TOUCHSCREEN_CY8CTMG110
 144         tristate "cy8ctmg110 touchscreen"
 145         depends on I2C
 146         depends on GPIOLIB
 147         help
 148           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 149           an AAVA device.
 150
 151           If unsure, say N.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called cy8ctmg110_ts.
 155
 156 config TOUCHSCREEN_CYTTSP_CORE
 157         tristate "Cypress TTSP touchscreen"
 158         help
 159           Say Y here if you have a touchscreen using controller from
 160           the Cypress TrueTouch(tm) Standard Product family connected
 161           to your system. You will also need to select appropriate
 162           bus connection below.
 163
 164           If unsure, say N.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called cyttsp_core.
 168
 169 config TOUCHSCREEN_CYTTSP_I2C
 170         tristate "support I2C bus connection"
 171         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 172         help
 173           Say Y here if the touchscreen is connected via I2C bus.
 174
 175           To compile this driver as a module, choose M here: the
 176           module will be called cyttsp_i2c.
 177
 178 config TOUCHSCREEN_CYTTSP_SPI
 179         tristate "support SPI bus connection"
 180         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 181         help
 182           Say Y here if the touchscreen is connected via SPI bus.
 183
 184           To compile this driver as a module, choose M here: the
 185           module will be called cyttsp_spi.
 186
 187 config TOUCHSCREEN_CYTTSP4_CORE
 188         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 189         help
 190           Core driver for Cypress TrueTouch(tm) Standard Product
 191           Generation4 touchscreen controllers.
 192
 193           Say Y here if you have a Cypress Gen4 touchscreen.
 194
 195           If unsure, say N.
 196
 197           To compile this driver as a module, choose M here.
 198
 199 config TOUCHSCREEN_CYTTSP4_I2C
 200         tristate "support I2C bus connection"
 201         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 202         help
 203           Say Y here if the touchscreen is connected via I2C bus.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called cyttsp4_i2c.
 207
 208 config TOUCHSCREEN_CYTTSP4_SPI
 209         tristate "support SPI bus connection"
 210         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 211         help
 212           Say Y here if the touchscreen is connected via SPI bus.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called cyttsp4_spi.
 216
 217 config TOUCHSCREEN_DA9034
 218         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 219         depends on PMIC_DA903X
 220         default y
 221         help
 222           Say Y here to enable the support for the touchscreen found
 223           on Dialog Semiconductor DA9034 PMIC.
 224
 225           If unsure, say N.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called da9034-ts.
 229
 230 config TOUCHSCREEN_DA9052
 231         tristate "Dialog DA9052/DA9053 TSI"
 232         depends on PMIC_DA9052
 233         help
 234           Say Y here to support the touchscreen found on Dialog Semiconductor
 235           DA9052-BC and DA9053-AA/Bx PMICs.
 236
 237           If unsure, say N.
 238
 239           To compile this driver as a module, choose M here: the
 240           module will be called da9052_tsi.
 241
 242 config TOUCHSCREEN_DYNAPRO
 243         tristate "Dynapro serial touchscreen"
 244         select SERIO
 245         help
 246           Say Y here if you have a Dynapro serial touchscreen connected to
 247           your system.
 248
 249           If unsure, say N.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called dynapro.
 253
 254 config TOUCHSCREEN_HAMPSHIRE
 255         tristate "Hampshire serial touchscreen"
 256         select SERIO
 257         help
 258           Say Y here if you have a Hampshire serial touchscreen connected to
 259           your system.
 260
 261           If unsure, say N.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called hampshire.
 265
 266 config TOUCHSCREEN_EETI
 267         tristate "EETI touchscreen panel support"
 268         depends on I2C
 269         help
 270           Say Y here to enable support for I2C connected EETI touch panels.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called eeti_ts.
 274
 275 config TOUCHSCREEN_EGALAX
 276         tristate "EETI eGalax multi-touch panel support"
 277         depends on I2C && OF
 278         help
 279           Say Y here to enable support for I2C connected EETI
 280           eGalax multi-touch panels.
 281
 282           To compile this driver as a module, choose M here: the
 283           module will be called egalax_ts.
 284
 285 config TOUCHSCREEN_FUJITSU
 286         tristate "Fujitsu serial touchscreen"
 287         select SERIO
 288         help
 289           Say Y here if you have the Fujitsu touchscreen (such as one
 290           installed in Lifebook P series laptop) connected to your
 291           system.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called fujitsu-ts.
 297
 298 config TOUCHSCREEN_GOODIX
 299         tristate "Goodix I2C touchscreen"
 300         depends on I2C && ACPI
 301         help
 302           Say Y here if you have the Goodix touchscreen (such as one
 303           installed in Onda v975w tablets) connected to your
 304           system.
 305
 306           If unsure, say N.
 307
 308           To compile this driver as a module, choose M here: the
 309           module will be called goodix.
 310
 311 config TOUCHSCREEN_ILI210X
 312         tristate "Ilitek ILI210X based touchscreen"
 313         depends on I2C
 314         help
 315           Say Y here if you have a ILI210X based touchscreen
 316           controller. This driver supports models ILI2102,
 317           ILI2102s, ILI2103, ILI2103s and ILI2105.
 318           Such kind of chipsets can be found in Amazon Kindle Fire
 319           touchscreens.
 320
 321           If unsure, say N.
 322
 323           To compile this driver as a module, choose M here: the
 324           module will be called ili210x.
 325
 326 config TOUCHSCREEN_S3C2410
 327         tristate "Samsung S3C2410/generic touchscreen input driver"
 328         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 329         select S3C_ADC
 330         help
 331           Say Y here if you have the s3c2410 touchscreen.
 332
 333           If unsure, say N.
 334
 335           To compile this driver as a module, choose M here: the
 336           module will be called s3c2410_ts.
 337
 338 config TOUCHSCREEN_GUNZE
 339         tristate "Gunze AHL-51S touchscreen"
 340         select SERIO
 341         help
 342           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 343           your system.
 344
 345           If unsure, say N.
 346
 347           To compile this driver as a module, choose M here: the
 348           module will be called gunze.
 349
 350 config TOUCHSCREEN_ELAN
 351         tristate "Elan eKTH I2C touchscreen"
 352         depends on I2C
 353         help
 354           Say Y here if you have an Elan eKTH I2C touchscreen
 355           connected to your system.
 356
 357           If unsure, say N.
 358
 359           To compile this driver as a module, choose M here: the
 360           module will be called elants_i2c.
 361
 362 config TOUCHSCREEN_ELO
 363         tristate "Elo serial touchscreens"
 364         select SERIO
 365         help
 366           Say Y here if you have an Elo serial touchscreen connected to
 367           your system.
 368
 369           If unsure, say N.
 370
 371           To compile this driver as a module, choose M here: the
 372           module will be called elo.
 373
 374 config TOUCHSCREEN_WACOM_W8001
 375         tristate "Wacom W8001 penabled serial touchscreen"
 376         select SERIO
 377         help
 378           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 379           connected to your system.
 380
 381           If unsure, say N.
 382
 383           To compile this driver as a module, choose M here: the
 384           module will be called wacom_w8001.
 385
 386 config TOUCHSCREEN_WACOM_I2C
 387         tristate "Wacom Tablet support (I2C)"
 388         depends on I2C
 389         help
 390           Say Y here if you want to use the I2C version of the Wacom
 391           Pen Tablet.
 392
 393           If unsure, say N.
 394
 395           To compile this driver as a module, choose M here: the module
 396           will be called wacom_i2c.
 397
 398 config TOUCHSCREEN_LPC32XX
 399         tristate "LPC32XX touchscreen controller"
 400         depends on ARCH_LPC32XX
 401         help
 402           Say Y here if you have a LPC32XX device and want
 403           to support the built-in touchscreen.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called lpc32xx_ts.
 407
 408 config TOUCHSCREEN_MAX11801
 409         tristate "MAX11801 based touchscreens"
 410         depends on I2C
 411         help
 412           Say Y here if you have a MAX11801 based touchscreen
 413           controller.
 414
 415           If unsure, say N.
 416
 417           To compile this driver as a module, choose M here: the
 418           module will be called max11801_ts.
 419
 420 config TOUCHSCREEN_MCS5000
 421         tristate "MELFAS MCS-5000 touchscreen"
 422         depends on I2C
 423         help
 424           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 425           chip in your system.
 426
 427           If unsure, say N.
 428
 429           To compile this driver as a module, choose M here: the
 430           module will be called mcs5000_ts.
 431
 432 config TOUCHSCREEN_MMS114
 433         tristate "MELFAS MMS114 touchscreen"
 434         depends on I2C
 435         help
 436           Say Y here if you have the MELFAS MMS114 touchscreen controller
 437           chip in your system.
 438
 439           If unsure, say N.
 440
 441           To compile this driver as a module, choose M here: the
 442           module will be called mms114.
 443
 444 config TOUCHSCREEN_MTOUCH
 445         tristate "MicroTouch serial touchscreens"
 446         select SERIO
 447         help
 448           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 449           your system.
 450
 451           If unsure, say N.
 452
 453           To compile this driver as a module, choose M here: the
 454           module will be called mtouch.
 455
 456 config TOUCHSCREEN_INEXIO
 457         tristate "iNexio serial touchscreens"
 458         select SERIO
 459         help
 460           Say Y here if you have an iNexio serial touchscreen connected to
 461           your system.
 462
 463           If unsure, say N.
 464
 465           To compile this driver as a module, choose M here: the
 466           module will be called inexio.
 467
 468 config TOUCHSCREEN_INTEL_MID
 469         tristate "Intel MID platform resistive touchscreen"
 470         depends on INTEL_SCU_IPC
 471         help
 472           Say Y here if you have a Intel MID based touchscreen in
 473           your system.
 474
 475           If unsure, say N.
 476
 477           To compile this driver as a module, choose M here: the
 478           module will be called intel_mid_touch.
 479
 480 config TOUCHSCREEN_MK712
 481         tristate "ICS MicroClock MK712 touchscreen"
 482         help
 483           Say Y here if you have the ICS MicroClock MK712 touchscreen
 484           controller chip in your system.
 485
 486           If unsure, say N.
 487
 488           To compile this driver as a module, choose M here: the
 489           module will be called mk712.
 490
 491 config TOUCHSCREEN_HP600
 492         tristate "HP Jornada 6xx touchscreen"
 493         depends on SH_HP6XX && SH_ADC
 494         help
 495           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 496           support the built-in touchscreen.
 497
 498           To compile this driver as a module, choose M here: the
 499           module will be called hp680_ts_input.
 500
 501 config TOUCHSCREEN_HP7XX
 502         tristate "HP Jornada 7xx touchscreen"
 503         depends on SA1100_JORNADA720_SSP
 504         help
 505           Say Y here if you have a HP Jornada 710/720/728 and want
 506           to support the built-in touchscreen.
 507
 508           To compile this driver as a module, choose M here: the
 509           module will be called jornada720_ts.
 510
 511 config TOUCHSCREEN_IPAQ_MICRO
 512         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 513         depends on MFD_IPAQ_MICRO
 514         help
 515           Say Y here to enable support for the touchscreen attached to
 516           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 517
 518           If unsure, say N.
 519
 520           To compile this driver as a module, choose M here: the
 521           module will be called ipaq-micro-ts.
 522
 523 config TOUCHSCREEN_HTCPEN
 524         tristate "HTC Shift X9500 touchscreen"
 525         depends on ISA
 526         help
 527           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 528           Clio / Shangrila and want to support the built-in touchscreen.
 529
 530           If unsure, say N.
 531
 532           To compile this driver as a module, choose M here: the
 533           module will be called htcpen.
 534
 535 config TOUCHSCREEN_PENMOUNT
 536         tristate "Penmount serial touchscreen"
 537         select SERIO
 538         help
 539           Say Y here if you have a Penmount serial touchscreen connected to
 540           your system.
 541
 542           If unsure, say N.
 543
 544           To compile this driver as a module, choose M here: the
 545           module will be called penmount.
 546
 547 config TOUCHSCREEN_EDT_FT5X06
 548         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 549         depends on I2C
 550         help
 551           Say Y here if you have an EDT "Polytouch" touchscreen based
 552           on the FocalTech FT5x06 family of controllers connected to
 553           your system.
 554
 555           If unsure, say N.
 556
 557           To compile this driver as a module, choose M here: the
 558           module will be called edt-ft5x06.
 559
 560 config TOUCHSCREEN_MIGOR
 561         tristate "Renesas MIGO-R touchscreen"
 562         depends on SH_MIGOR && I2C
 563         help
 564           Say Y here to enable MIGO-R touchscreen support.
 565
 566           If unsure, say N.
 567
 568           To compile this driver as a module, choose M here: the
 569           module will be called migor_ts.
 570
 571 config TOUCHSCREEN_TOUCHRIGHT
 572         tristate "Touchright serial touchscreen"
 573         select SERIO
 574         help
 575           Say Y here if you have a Touchright serial touchscreen connected to
 576           your system.
 577
 578           If unsure, say N.
 579
 580           To compile this driver as a module, choose M here: the
 581           module will be called touchright.
 582
 583 config TOUCHSCREEN_TOUCHWIN
 584         tristate "Touchwin serial touchscreen"
 585         select SERIO
 586         help
 587           Say Y here if you have a Touchwin serial touchscreen connected to
 588           your system.
 589
 590           If unsure, say N.
 591
 592           To compile this driver as a module, choose M here: the
 593           module will be called touchwin.
 594
 595 config TOUCHSCREEN_TI_AM335X_TSC
 596         tristate "TI Touchscreen Interface"
 597         depends on MFD_TI_AM335X_TSCADC
 598         help
 599           Say Y here if you have 4/5/8 wire touchscreen controller
 600           to be connected to the ADC controller on your TI AM335x SoC.
 601
 602           If unsure, say N.
 603
 604           To compile this driver as a module, choose M here: the
 605           module will be called ti_am335x_tsc.
 606
 607 config TOUCHSCREEN_UCB1400
 608         tristate "Philips UCB1400 touchscreen"
 609         depends on AC97_BUS
 610         depends on UCB1400_CORE
 611         help
 612           This enables support for the Philips UCB1400 touchscreen interface.
 613           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 614           will be initialized only after the ALSA subsystem has been
 615           brought up and the UCB1400 detected.  You therefore have to
 616           configure ALSA support as well (either built-in or modular,
 617           independently of whether this driver is itself built-in or
 618           modular) for this driver to work.
 619
 620           To compile this driver as a module, choose M here: the
 621           module will be called ucb1400_ts.
 622
 623 config TOUCHSCREEN_PIXCIR
 624         tristate "PIXCIR I2C touchscreens"
 625         depends on I2C
 626         help
 627           Say Y here if you have a pixcir i2c touchscreen
 628           controller.
 629
 630           If unsure, say N.
 631
 632           To compile this driver as a module, choose M here: the
 633           module will be called pixcir_i2c_ts.
 634
 635 config TOUCHSCREEN_WM831X
 636         tristate "Support for WM831x touchscreen controllers"
 637         depends on MFD_WM831X
 638         help
 639           This enables support for the touchscreen controller on the WM831x
 640           series of PMICs.
 641
 642           To compile this driver as a module, choose M here: the
 643           module will be called wm831x-ts.
 644
 645 config TOUCHSCREEN_WM97XX
 646         tristate "Support for WM97xx AC97 touchscreen controllers"
 647         depends on AC97_BUS
 648         help
 649           Say Y here if you have a Wolfson Microelectronics WM97xx
 650           touchscreen connected to your system. Note that this option
 651           only enables core driver, you will also need to select
 652           support for appropriate chip below.
 653
 654           If unsure, say N.
 655
 656           To compile this driver as a module, choose M here: the
 657           module will be called wm97xx-ts.
 658
 659 config TOUCHSCREEN_WM9705
 660         bool "WM9705 Touchscreen interface support"
 661         depends on TOUCHSCREEN_WM97XX
 662         default y
 663         help
 664           Say Y here to enable support for the Wolfson Microelectronics
 665           WM9705 touchscreen controller.
 666
 667 config TOUCHSCREEN_WM9712
 668         bool "WM9712 Touchscreen interface support"
 669         depends on TOUCHSCREEN_WM97XX
 670         default y
 671         help
 672           Say Y here to enable support for the Wolfson Microelectronics
 673           WM9712 touchscreen controller.
 674
 675 config TOUCHSCREEN_WM9713
 676         bool "WM9713 Touchscreen interface support"
 677         depends on TOUCHSCREEN_WM97XX
 678         default y
 679         help
 680           Say Y here to enable support for the Wolfson Microelectronics
 681           WM9713 touchscreen controller.
 682
 683 config TOUCHSCREEN_WM97XX_ATMEL
 684         tristate "WM97xx Atmel accelerated touch"
 685         depends on TOUCHSCREEN_WM97XX && AVR32
 686         help
 687           Say Y here for support for streaming mode with WM97xx touchscreens
 688           on Atmel AT91 or AVR32 systems with an AC97C module.
 689
 690           Be aware that this will use channel B in the controller for
 691           streaming data, this must not conflict with other AC97C drivers.
 692
 693           If unsure, say N.
 694
 695           To compile this driver as a module, choose M here: the module will
 696           be called atmel-wm97xx.
 697
 698 config TOUCHSCREEN_WM97XX_MAINSTONE
 699         tristate "WM97xx Mainstone/Palm accelerated touch"
 700         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 701         help
 702           Say Y here for support for streaming mode with WM97xx touchscreens
 703           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 704
 705           If unsure, say N.
 706
 707           To compile this driver as a module, choose M here: the
 708           module will be called mainstone-wm97xx.
 709
 710 config TOUCHSCREEN_WM97XX_ZYLONITE
 711         tristate "Zylonite accelerated touch"
 712         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 713         select TOUCHSCREEN_WM9713
 714         help
 715           Say Y here for support for streaming mode with the touchscreen
 716           on Zylonite systems.
 717
 718           If unsure, say N.
 719
 720           To compile this driver as a module, choose M here: the
 721           module will be called zylonite-wm97xx.
 722
 723 config TOUCHSCREEN_USB_COMPOSITE
 724         tristate "USB Touchscreen Driver"
 725         depends on USB_ARCH_HAS_HCD
 726         select USB
 727         help
 728           USB Touchscreen driver for:
 729           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 730           - PanJit TouchSet USB
 731           - 3M MicroTouch USB (EX II series)
 732           - ITM
 733           - some other eTurboTouch
 734           - Gunze AHL61
 735           - DMC TSC-10/25
 736           - IRTOUCHSYSTEMS/UNITOP
 737           - IdealTEK URTC1000
 738           - GoTop Super_Q2/GogoPen/PenPower tablets
 739           - JASTEC USB Touch Controller/DigiTech DTR-02U
 740           - Zytronic controllers
 741           - Elo TouchSystems 2700 IntelliTouch
 742           - EasyTouch USB Touch Controller from Data Modul
 743           - e2i (Mimo monitors)
 744
 745           Have a look at <http://linux.chapter7.ch/touchkit/> for
 746           a usage description and the required user-space stuff.
 747
 748           To compile this driver as a module, choose M here: the
 749           module will be called usbtouchscreen.
 750
 751 config TOUCHSCREEN_MC13783
 752         tristate "Freescale MC13783 touchscreen input driver"
 753         depends on MFD_MC13XXX
 754         help
 755           Say Y here if you have an Freescale MC13783 PMIC on your
 756           board and want to use its touchscreen
 757
 758           If unsure, say N.
 759
 760           To compile this driver as a module, choose M here: the
 761           module will be called mc13783_ts.
 762
 763 config TOUCHSCREEN_USB_EGALAX
 764         default y
 765         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 766         depends on TOUCHSCREEN_USB_COMPOSITE
 767
 768 config TOUCHSCREEN_USB_PANJIT
 769         default y
 770         bool "PanJit device support" if EXPERT
 771         depends on TOUCHSCREEN_USB_COMPOSITE
 772
 773 config TOUCHSCREEN_USB_3M
 774         default y
 775         bool "3M/Microtouch EX II series device support" if EXPERT
 776         depends on TOUCHSCREEN_USB_COMPOSITE
 777
 778 config TOUCHSCREEN_USB_ITM
 779         default y
 780         bool "ITM device support" if EXPERT
 781         depends on TOUCHSCREEN_USB_COMPOSITE
 782
 783 config TOUCHSCREEN_USB_ETURBO
 784         default y
 785         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 786         depends on TOUCHSCREEN_USB_COMPOSITE
 787
 788 config TOUCHSCREEN_USB_GUNZE
 789         default y
 790         bool "Gunze AHL61 device support" if EXPERT
 791         depends on TOUCHSCREEN_USB_COMPOSITE
 792
 793 config TOUCHSCREEN_USB_DMC_TSC10
 794         default y
 795         bool "DMC TSC-10/25 device support" if EXPERT
 796         depends on TOUCHSCREEN_USB_COMPOSITE
 797
 798 config TOUCHSCREEN_USB_IRTOUCH
 799         default y
 800         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 801         depends on TOUCHSCREEN_USB_COMPOSITE
 802
 803 config TOUCHSCREEN_USB_IDEALTEK
 804         default y
 805         bool "IdealTEK URTC1000 device support" if EXPERT
 806         depends on TOUCHSCREEN_USB_COMPOSITE
 807
 808 config TOUCHSCREEN_USB_GENERAL_TOUCH
 809         default y
 810         bool "GeneralTouch Touchscreen device support" if EXPERT
 811         depends on TOUCHSCREEN_USB_COMPOSITE
 812
 813 config TOUCHSCREEN_USB_GOTOP
 814         default y
 815         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 816         depends on TOUCHSCREEN_USB_COMPOSITE
 817
 818 config TOUCHSCREEN_USB_JASTEC
 819         default y
 820         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 821         depends on TOUCHSCREEN_USB_COMPOSITE
 822
 823 config TOUCHSCREEN_USB_ELO
 824         default y
 825         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 826         depends on TOUCHSCREEN_USB_COMPOSITE
 827
 828 config TOUCHSCREEN_USB_E2I
 829         default y
 830         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 831         depends on TOUCHSCREEN_USB_COMPOSITE
 832
 833 config TOUCHSCREEN_USB_ZYTRONIC
 834         default y
 835         bool "Zytronic controller" if EXPERT
 836         depends on TOUCHSCREEN_USB_COMPOSITE
 837
 838 config TOUCHSCREEN_USB_ETT_TC45USB
 839         default y
 840         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 841         depends on TOUCHSCREEN_USB_COMPOSITE
 842
 843 config TOUCHSCREEN_USB_NEXIO
 844         default y
 845         bool "NEXIO/iNexio device support" if EXPERT
 846         depends on TOUCHSCREEN_USB_COMPOSITE
 847
 848 config TOUCHSCREEN_USB_EASYTOUCH
 849         default y
 850         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 851         depends on TOUCHSCREEN_USB_COMPOSITE
 852         help
 853           Say Y here if you have an EasyTouch USB Touch controller.
 854           If unsure, say N.
 855
 856 config TOUCHSCREEN_TOUCHIT213
 857         tristate "Sahara TouchIT-213 touchscreen"
 858         select SERIO
 859         help
 860           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 861
 862           If unsure, say N.
 863
 864           To compile this driver as a module, choose M here: the
 865           module will be called touchit213.
 866
 867 config TOUCHSCREEN_TSC_SERIO
 868         tristate "TSC-10/25/40 serial touchscreen support"
 869         select SERIO
 870         help
 871           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 872           to your system.
 873
 874           If unsure, say N.
 875
 876           To compile this driver as a module, choose M here: the
 877           module will be called tsc40.
 878
 879 config TOUCHSCREEN_TSC2005
 880         tristate "TSC2005 based touchscreens"
 881         depends on SPI_MASTER
 882         help
 883           Say Y here if you have a TSC2005 based touchscreen.
 884
 885           If unsure, say N.
 886
 887           To compile this driver as a module, choose M here: the
 888           module will be called tsc2005.
 889
 890 config TOUCHSCREEN_TSC2007
 891         tristate "TSC2007 based touchscreens"
 892         depends on I2C
 893         help
 894           Say Y here if you have a TSC2007 based touchscreen.
 895
 896           If unsure, say N.
 897
 898           To compile this driver as a module, choose M here: the
 899           module will be called tsc2007.
 900
 901 config TOUCHSCREEN_W90X900
 902         tristate "W90P910 touchscreen driver"
 903         depends on ARCH_W90X900
 904         help
 905           Say Y here if you have a W90P910 based touchscreen.
 906
 907           To compile this driver as a module, choose M here: the
 908           module will be called w90p910_ts.
 909
 910 config TOUCHSCREEN_PCAP
 911         tristate "Motorola PCAP touchscreen"
 912         depends on EZX_PCAP
 913         help
 914           Say Y here if you have a Motorola EZX telephone and
 915           want to enable support for the built-in touchscreen.
 916
 917           To compile this driver as a module, choose M here: the
 918           module will be called pcap_ts.
 919
 920 config TOUCHSCREEN_ST1232
 921         tristate "Sitronix ST1232 touchscreen controllers"
 922         depends on I2C
 923         help
 924           Say Y here if you want to support Sitronix ST1232
 925           touchscreen controller.
 926
 927           If unsure, say N.
 928
 929           To compile this driver as a module, choose M here: the
 930           module will be called st1232_ts.
 931
 932 config TOUCHSCREEN_STMPE
 933         tristate "STMicroelectronics STMPE touchscreens"
 934         depends on MFD_STMPE
 935         help
 936           Say Y here if you want support for STMicroelectronics
 937           STMPE touchscreen controllers.
 938
 939           To compile this driver as a module, choose M here: the
 940           module will be called stmpe-ts.
 941
 942 config TOUCHSCREEN_SUN4I
 943         tristate "Allwinner sun4i resistive touchscreen controller support"
 944         depends on ARCH_SUNXI || COMPILE_TEST
 945         depends on HWMON
 946         depends on THERMAL || !THERMAL_OF
 947         help
 948           This selects support for the resistive touchscreen controller
 949           found on Allwinner sunxi SoCs.
 950
 951           To compile this driver as a module, choose M here: the
 952           module will be called sun4i-ts.
 953
 954 config TOUCHSCREEN_SUR40
 955         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 956         depends on USB
 957         select INPUT_POLLDEV
 958         help
 959           Say Y here if you want support for the Samsung SUR40 touchscreen
 960           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
 961
 962           To compile this driver as a module, choose M here: the
 963           module will be called sur40.
 964
 965 config TOUCHSCREEN_TPS6507X
 966         tristate "TPS6507x based touchscreens"
 967         depends on I2C
 968         select INPUT_POLLDEV
 969         help
 970           Say Y here if you have a TPS6507x based touchscreen
 971           controller.
 972
 973           If unsure, say N.
 974
 975           To compile this driver as a module, choose M here: the
 976           module will be called tps6507x_ts.
 977
 978 config TOUCHSCREEN_ZFORCE
 979         tristate "Neonode zForce infrared touchscreens"
 980         depends on I2C
 981         depends on GPIOLIB
 982         help
 983           Say Y here if you have a touchscreen using the zforce
 984           infraread technology from Neonode.
 985
 986           If unsure, say N.
 987
 988           To compile this driver as a module, choose M here: the
 989           module will be called zforce_ts.
 990
 991 endif