drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config OF_TOUCHSCREEN
  15         def_tristate INPUT
  16         depends on INPUT && OF
  17
  18 config TOUCHSCREEN_88PM860X
  19         tristate "Marvell 88PM860x touchscreen"
  20         depends on MFD_88PM860X
  21         help
  22           Say Y here if you have a 88PM860x PMIC and want to enable
  23           support for the built-in touchscreen.
  24
  25           If unsure, say N.
  26
  27           To compile this driver as a module, choose M here: the
  28           module will be called 88pm860x-ts.
  29
  30 config TOUCHSCREEN_ADS7846
  31         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32         depends on SPI_MASTER
  33         depends on HWMON = n || HWMON
  34         help
  35           Say Y here if you have a touchscreen interface using the
  36           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37           and your board-specific setup code includes that in its
  38           table of SPI devices.
  39
  40           If HWMON is selected, and the driver is told the reference voltage
  41           on your board, you will also get hwmon interfaces for the voltage
  42           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44           If unsure, say N (but it's safe to say "Y").
  45
  46           To compile this driver as a module, choose M here: the
  47           module will be called ads7846.
  48
  49 config TOUCHSCREEN_AD7877
  50         tristate "AD7877 based touchscreens"
  51         depends on SPI_MASTER
  52         help
  53           Say Y here if you have a touchscreen interface using the
  54           AD7877 controller, and your board-specific initialization
  55           code includes that in its table of SPI devices.
  56
  57           If unsure, say N (but it's safe to say "Y").
  58
  59           To compile this driver as a module, choose M here: the
  60           module will be called ad7877.
  61
  62 config TOUCHSCREEN_AD7879
  63         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64         help
  65           Say Y here if you want to support a touchscreen interface using
  66           the AD7879-1/AD7889-1 controller.
  67
  68           You should select a bus connection too.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879_I2C
  74         tristate "support I2C bus connection"
  75         depends on TOUCHSCREEN_AD7879 && I2C
  76         help
  77           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ad7879-i2c.
  81
  82 config TOUCHSCREEN_AD7879_SPI
  83         tristate "support SPI bus connection"
  84         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  85         help
  86           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88           If unsure, say N (but it's safe to say "Y").
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called ad7879-spi.
  92
  93 config TOUCHSCREEN_AR1021_I2C
  94         tristate "Microchip AR1021 i2c touchscreen"
  95         depends on I2C && OF
  96         help
  97           Say Y here if you have the Microchip AR1021 touchscreen controller
  98           chip in your system.
  99
 100           If unsure, say N.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called ar1021_i2c.
 104
 105 config TOUCHSCREEN_ATMEL_MXT
 106         tristate "Atmel mXT I2C Touchscreen"
 107         depends on I2C
 108         select FW_LOADER
 109         help
 110           Say Y here if you have Atmel mXT series I2C touchscreen,
 111           such as AT42QT602240/ATMXT224, connected to your system.
 112
 113           If unsure, say N.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called atmel_mxt_ts.
 117
 118 config TOUCHSCREEN_AUO_PIXCIR
 119         tristate "AUO in-cell touchscreen using Pixcir ICs"
 120         depends on I2C
 121         depends on GPIOLIB
 122         help
 123           Say Y here if you have a AUO display with in-cell touchscreen
 124           using Pixcir ICs.
 125
 126           If unsure, say N.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called auo-pixcir-ts.
 130
 131 config TOUCHSCREEN_BU21013
 132         tristate "BU21013 based touch panel controllers"
 133         depends on I2C
 134         help
 135           Say Y here if you have a bu21013 touchscreen connected to
 136           your system.
 137
 138           If unsure, say N.
 139
 140           To compile this driver as a module, choose M here: the
 141           module will be called bu21013_ts.
 142
 143 config TOUCHSCREEN_CY8CTMG110
 144         tristate "cy8ctmg110 touchscreen"
 145         depends on I2C
 146         depends on GPIOLIB
 147         help
 148           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 149           an AAVA device.
 150
 151           If unsure, say N.
 152
 153           To compile this driver as a module, choose M here: the
 154           module will be called cy8ctmg110_ts.
 155
 156 config TOUCHSCREEN_CYTTSP_CORE
 157         tristate "Cypress TTSP touchscreen"
 158         help
 159           Say Y here if you have a touchscreen using controller from
 160           the Cypress TrueTouch(tm) Standard Product family connected
 161           to your system. You will also need to select appropriate
 162           bus connection below.
 163
 164           If unsure, say N.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called cyttsp_core.
 168
 169 config TOUCHSCREEN_CYTTSP_I2C
 170         tristate "support I2C bus connection"
 171         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 172         help
 173           Say Y here if the touchscreen is connected via I2C bus.
 174
 175           To compile this driver as a module, choose M here: the
 176           module will be called cyttsp_i2c.
 177
 178 config TOUCHSCREEN_CYTTSP_SPI
 179         tristate "support SPI bus connection"
 180         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 181         help
 182           Say Y here if the touchscreen is connected via SPI bus.
 183
 184           To compile this driver as a module, choose M here: the
 185           module will be called cyttsp_spi.
 186
 187 config TOUCHSCREEN_CYTTSP4_CORE
 188         tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 189         help
 190           Core driver for Cypress TrueTouch(tm) Standard Product
 191           Generation4 touchscreen controllers.
 192
 193           Say Y here if you have a Cypress Gen4 touchscreen.
 194
 195           If unsure, say N.
 196
 197           To compile this driver as a module, choose M here.
 198
 199 config TOUCHSCREEN_CYTTSP4_I2C
 200         tristate "support I2C bus connection"
 201         depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 202         help
 203           Say Y here if the touchscreen is connected via I2C bus.
 204
 205           To compile this driver as a module, choose M here: the
 206           module will be called cyttsp4_i2c.
 207
 208 config TOUCHSCREEN_CYTTSP4_SPI
 209         tristate "support SPI bus connection"
 210         depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 211         help
 212           Say Y here if the touchscreen is connected via SPI bus.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called cyttsp4_spi.
 216
 217 config TOUCHSCREEN_DA9034
 218         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 219         depends on PMIC_DA903X
 220         default y
 221         help
 222           Say Y here to enable the support for the touchscreen found
 223           on Dialog Semiconductor DA9034 PMIC.
 224
 225           If unsure, say N.
 226
 227           To compile this driver as a module, choose M here: the
 228           module will be called da9034-ts.
 229
 230 config TOUCHSCREEN_DA9052
 231         tristate "Dialog DA9052/DA9053 TSI"
 232         depends on PMIC_DA9052
 233         help
 234           Say Y here to support the touchscreen found on Dialog Semiconductor
 235           DA9052-BC and DA9053-AA/Bx PMICs.
 236
 237           If unsure, say N.
 238
 239           To compile this driver as a module, choose M here: the
 240           module will be called da9052_tsi.
 241
 242 config TOUCHSCREEN_DYNAPRO
 243         tristate "Dynapro serial touchscreen"
 244         select SERIO
 245         help
 246           Say Y here if you have a Dynapro serial touchscreen connected to
 247           your system.
 248
 249           If unsure, say N.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called dynapro.
 253
 254 config TOUCHSCREEN_HAMPSHIRE
 255         tristate "Hampshire serial touchscreen"
 256         select SERIO
 257         help
 258           Say Y here if you have a Hampshire serial touchscreen connected to
 259           your system.
 260
 261           If unsure, say N.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called hampshire.
 265
 266 config TOUCHSCREEN_EETI
 267         tristate "EETI touchscreen panel support"
 268         depends on I2C
 269         help
 270           Say Y here to enable support for I2C connected EETI touch panels.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called eeti_ts.
 274
 275 config TOUCHSCREEN_EGALAX
 276         tristate "EETI eGalax multi-touch panel support"
 277         depends on I2C && OF
 278         help
 279           Say Y here to enable support for I2C connected EETI
 280           eGalax multi-touch panels.
 281
 282           To compile this driver as a module, choose M here: the
 283           module will be called egalax_ts.
 284
 285 config TOUCHSCREEN_FUJITSU
 286         tristate "Fujitsu serial touchscreen"
 287         select SERIO
 288         help
 289           Say Y here if you have the Fujitsu touchscreen (such as one
 290           installed in Lifebook P series laptop) connected to your
 291           system.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called fujitsu-ts.
 297
 298 config TOUCHSCREEN_GOODIX
 299         tristate "Goodix I2C touchscreen"
 300         depends on I2C && ACPI
 301         help
 302           Say Y here if you have the Goodix touchscreen (such as one
 303           installed in Onda v975w tablets) connected to your
 304           system.
 305
 306           If unsure, say N.
 307
 308           To compile this driver as a module, choose M here: the
 309           module will be called goodix.
 310
 311 config TOUCHSCREEN_ILI210X
 312         tristate "Ilitek ILI210X based touchscreen"
 313         depends on I2C
 314         help
 315           Say Y here if you have a ILI210X based touchscreen
 316           controller. This driver supports models ILI2102,
 317           ILI2102s, ILI2103, ILI2103s and ILI2105.
 318           Such kind of chipsets can be found in Amazon Kindle Fire
 319           touchscreens.
 320
 321           If unsure, say N.
 322
 323           To compile this driver as a module, choose M here: the
 324           module will be called ili210x.
 325
 326 config TOUCHSCREEN_S3C2410
 327         tristate "Samsung S3C2410/generic touchscreen input driver"
 328         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 329         select S3C_ADC
 330         help
 331           Say Y here if you have the s3c2410 touchscreen.
 332
 333           If unsure, say N.
 334
 335           To compile this driver as a module, choose M here: the
 336           module will be called s3c2410_ts.
 337
 338 config TOUCHSCREEN_GUNZE
 339         tristate "Gunze AHL-51S touchscreen"
 340         select SERIO
 341         help
 342           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 343           your system.
 344
 345           If unsure, say N.
 346
 347           To compile this driver as a module, choose M here: the
 348           module will be called gunze.
 349
 350 config TOUCHSCREEN_ELO
 351         tristate "Elo serial touchscreens"
 352         select SERIO
 353         help
 354           Say Y here if you have an Elo serial touchscreen connected to
 355           your system.
 356
 357           If unsure, say N.
 358
 359           To compile this driver as a module, choose M here: the
 360           module will be called elo.
 361
 362 config TOUCHSCREEN_WACOM_W8001
 363         tristate "Wacom W8001 penabled serial touchscreen"
 364         select SERIO
 365         help
 366           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 367           connected to your system.
 368
 369           If unsure, say N.
 370
 371           To compile this driver as a module, choose M here: the
 372           module will be called wacom_w8001.
 373
 374 config TOUCHSCREEN_WACOM_I2C
 375         tristate "Wacom Tablet support (I2C)"
 376         depends on I2C
 377         help
 378           Say Y here if you want to use the I2C version of the Wacom
 379           Pen Tablet.
 380
 381           If unsure, say N.
 382
 383           To compile this driver as a module, choose M here: the module
 384           will be called wacom_i2c.
 385
 386 config TOUCHSCREEN_LPC32XX
 387         tristate "LPC32XX touchscreen controller"
 388         depends on ARCH_LPC32XX
 389         help
 390           Say Y here if you have a LPC32XX device and want
 391           to support the built-in touchscreen.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called lpc32xx_ts.
 395
 396 config TOUCHSCREEN_MAX11801
 397         tristate "MAX11801 based touchscreens"
 398         depends on I2C
 399         help
 400           Say Y here if you have a MAX11801 based touchscreen
 401           controller.
 402
 403           If unsure, say N.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called max11801_ts.
 407
 408 config TOUCHSCREEN_MCS5000
 409         tristate "MELFAS MCS-5000 touchscreen"
 410         depends on I2C
 411         help
 412           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 413           chip in your system.
 414
 415           If unsure, say N.
 416
 417           To compile this driver as a module, choose M here: the
 418           module will be called mcs5000_ts.
 419
 420 config TOUCHSCREEN_MMS114
 421         tristate "MELFAS MMS114 touchscreen"
 422         depends on I2C
 423         help
 424           Say Y here if you have the MELFAS MMS114 touchscreen controller
 425           chip in your system.
 426
 427           If unsure, say N.
 428
 429           To compile this driver as a module, choose M here: the
 430           module will be called mms114.
 431
 432 config TOUCHSCREEN_MTOUCH
 433         tristate "MicroTouch serial touchscreens"
 434         select SERIO
 435         help
 436           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 437           your system.
 438
 439           If unsure, say N.
 440
 441           To compile this driver as a module, choose M here: the
 442           module will be called mtouch.
 443
 444 config TOUCHSCREEN_INEXIO
 445         tristate "iNexio serial touchscreens"
 446         select SERIO
 447         help
 448           Say Y here if you have an iNexio serial touchscreen connected to
 449           your system.
 450
 451           If unsure, say N.
 452
 453           To compile this driver as a module, choose M here: the
 454           module will be called inexio.
 455
 456 config TOUCHSCREEN_INTEL_MID
 457         tristate "Intel MID platform resistive touchscreen"
 458         depends on INTEL_SCU_IPC
 459         help
 460           Say Y here if you have a Intel MID based touchscreen in
 461           your system.
 462
 463           If unsure, say N.
 464
 465           To compile this driver as a module, choose M here: the
 466           module will be called intel_mid_touch.
 467
 468 config TOUCHSCREEN_MK712
 469         tristate "ICS MicroClock MK712 touchscreen"
 470         help
 471           Say Y here if you have the ICS MicroClock MK712 touchscreen
 472           controller chip in your system.
 473
 474           If unsure, say N.
 475
 476           To compile this driver as a module, choose M here: the
 477           module will be called mk712.
 478
 479 config TOUCHSCREEN_HP600
 480         tristate "HP Jornada 6xx touchscreen"
 481         depends on SH_HP6XX && SH_ADC
 482         help
 483           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 484           support the built-in touchscreen.
 485
 486           To compile this driver as a module, choose M here: the
 487           module will be called hp680_ts_input.
 488
 489 config TOUCHSCREEN_HP7XX
 490         tristate "HP Jornada 7xx touchscreen"
 491         depends on SA1100_JORNADA720_SSP
 492         help
 493           Say Y here if you have a HP Jornada 710/720/728 and want
 494           to support the built-in touchscreen.
 495
 496           To compile this driver as a module, choose M here: the
 497           module will be called jornada720_ts.
 498
 499 config TOUCHSCREEN_IPAQ_MICRO
 500         tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 501         depends on MFD_IPAQ_MICRO
 502         help
 503           Say Y here to enable support for the touchscreen attached to
 504           the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 505
 506           If unsure, say N.
 507
 508           To compile this driver as a module, choose M here: the
 509           module will be called ipaq-micro-ts.
 510
 511 config TOUCHSCREEN_HTCPEN
 512         tristate "HTC Shift X9500 touchscreen"
 513         depends on ISA
 514         help
 515           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 516           Clio / Shangrila and want to support the built-in touchscreen.
 517
 518           If unsure, say N.
 519
 520           To compile this driver as a module, choose M here: the
 521           module will be called htcpen.
 522
 523 config TOUCHSCREEN_PENMOUNT
 524         tristate "Penmount serial touchscreen"
 525         select SERIO
 526         help
 527           Say Y here if you have a Penmount serial touchscreen connected to
 528           your system.
 529
 530           If unsure, say N.
 531
 532           To compile this driver as a module, choose M here: the
 533           module will be called penmount.
 534
 535 config TOUCHSCREEN_EDT_FT5X06
 536         tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 537         depends on I2C
 538         help
 539           Say Y here if you have an EDT "Polytouch" touchscreen based
 540           on the FocalTech FT5x06 family of controllers connected to
 541           your system.
 542
 543           If unsure, say N.
 544
 545           To compile this driver as a module, choose M here: the
 546           module will be called edt-ft5x06.
 547
 548 config TOUCHSCREEN_MIGOR
 549         tristate "Renesas MIGO-R touchscreen"
 550         depends on SH_MIGOR && I2C
 551         help
 552           Say Y here to enable MIGO-R touchscreen support.
 553
 554           If unsure, say N.
 555
 556           To compile this driver as a module, choose M here: the
 557           module will be called migor_ts.
 558
 559 config TOUCHSCREEN_TOUCHRIGHT
 560         tristate "Touchright serial touchscreen"
 561         select SERIO
 562         help
 563           Say Y here if you have a Touchright serial touchscreen connected to
 564           your system.
 565
 566           If unsure, say N.
 567
 568           To compile this driver as a module, choose M here: the
 569           module will be called touchright.
 570
 571 config TOUCHSCREEN_TOUCHWIN
 572         tristate "Touchwin serial touchscreen"
 573         select SERIO
 574         help
 575           Say Y here if you have a Touchwin serial touchscreen connected to
 576           your system.
 577
 578           If unsure, say N.
 579
 580           To compile this driver as a module, choose M here: the
 581           module will be called touchwin.
 582
 583 config TOUCHSCREEN_TI_AM335X_TSC
 584         tristate "TI Touchscreen Interface"
 585         depends on MFD_TI_AM335X_TSCADC
 586         help
 587           Say Y here if you have 4/5/8 wire touchscreen controller
 588           to be connected to the ADC controller on your TI AM335x SoC.
 589
 590           If unsure, say N.
 591
 592           To compile this driver as a module, choose M here: the
 593           module will be called ti_am335x_tsc.
 594
 595 config TOUCHSCREEN_UCB1400
 596         tristate "Philips UCB1400 touchscreen"
 597         depends on AC97_BUS
 598         depends on UCB1400_CORE
 599         help
 600           This enables support for the Philips UCB1400 touchscreen interface.
 601           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 602           will be initialized only after the ALSA subsystem has been
 603           brought up and the UCB1400 detected.  You therefore have to
 604           configure ALSA support as well (either built-in or modular,
 605           independently of whether this driver is itself built-in or
 606           modular) for this driver to work.
 607
 608           To compile this driver as a module, choose M here: the
 609           module will be called ucb1400_ts.
 610
 611 config TOUCHSCREEN_PIXCIR
 612         tristate "PIXCIR I2C touchscreens"
 613         depends on I2C
 614         help
 615           Say Y here if you have a pixcir i2c touchscreen
 616           controller.
 617
 618           If unsure, say N.
 619
 620           To compile this driver as a module, choose M here: the
 621           module will be called pixcir_i2c_ts.
 622
 623 config TOUCHSCREEN_WM831X
 624         tristate "Support for WM831x touchscreen controllers"
 625         depends on MFD_WM831X
 626         help
 627           This enables support for the touchscreen controller on the WM831x
 628           series of PMICs.
 629
 630           To compile this driver as a module, choose M here: the
 631           module will be called wm831x-ts.
 632
 633 config TOUCHSCREEN_WM97XX
 634         tristate "Support for WM97xx AC97 touchscreen controllers"
 635         depends on AC97_BUS
 636         help
 637           Say Y here if you have a Wolfson Microelectronics WM97xx
 638           touchscreen connected to your system. Note that this option
 639           only enables core driver, you will also need to select
 640           support for appropriate chip below.
 641
 642           If unsure, say N.
 643
 644           To compile this driver as a module, choose M here: the
 645           module will be called wm97xx-ts.
 646
 647 config TOUCHSCREEN_WM9705
 648         bool "WM9705 Touchscreen interface support"
 649         depends on TOUCHSCREEN_WM97XX
 650         default y
 651         help
 652           Say Y here to enable support for the Wolfson Microelectronics
 653           WM9705 touchscreen controller.
 654
 655 config TOUCHSCREEN_WM9712
 656         bool "WM9712 Touchscreen interface support"
 657         depends on TOUCHSCREEN_WM97XX
 658         default y
 659         help
 660           Say Y here to enable support for the Wolfson Microelectronics
 661           WM9712 touchscreen controller.
 662
 663 config TOUCHSCREEN_WM9713
 664         bool "WM9713 Touchscreen interface support"
 665         depends on TOUCHSCREEN_WM97XX
 666         default y
 667         help
 668           Say Y here to enable support for the Wolfson Microelectronics
 669           WM9713 touchscreen controller.
 670
 671 config TOUCHSCREEN_WM97XX_ATMEL
 672         tristate "WM97xx Atmel accelerated touch"
 673         depends on TOUCHSCREEN_WM97XX && AVR32
 674         help
 675           Say Y here for support for streaming mode with WM97xx touchscreens
 676           on Atmel AT91 or AVR32 systems with an AC97C module.
 677
 678           Be aware that this will use channel B in the controller for
 679           streaming data, this must not conflict with other AC97C drivers.
 680
 681           If unsure, say N.
 682
 683           To compile this driver as a module, choose M here: the module will
 684           be called atmel-wm97xx.
 685
 686 config TOUCHSCREEN_WM97XX_MAINSTONE
 687         tristate "WM97xx Mainstone/Palm accelerated touch"
 688         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 689         help
 690           Say Y here for support for streaming mode with WM97xx touchscreens
 691           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 692
 693           If unsure, say N.
 694
 695           To compile this driver as a module, choose M here: the
 696           module will be called mainstone-wm97xx.
 697
 698 config TOUCHSCREEN_WM97XX_ZYLONITE
 699         tristate "Zylonite accelerated touch"
 700         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 701         select TOUCHSCREEN_WM9713
 702         help
 703           Say Y here for support for streaming mode with the touchscreen
 704           on Zylonite systems.
 705
 706           If unsure, say N.
 707
 708           To compile this driver as a module, choose M here: the
 709           module will be called zylonite-wm97xx.
 710
 711 config TOUCHSCREEN_USB_COMPOSITE
 712         tristate "USB Touchscreen Driver"
 713         depends on USB_ARCH_HAS_HCD
 714         select USB
 715         help
 716           USB Touchscreen driver for:
 717           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 718           - PanJit TouchSet USB
 719           - 3M MicroTouch USB (EX II series)
 720           - ITM
 721           - some other eTurboTouch
 722           - Gunze AHL61
 723           - DMC TSC-10/25
 724           - IRTOUCHSYSTEMS/UNITOP
 725           - IdealTEK URTC1000
 726           - GoTop Super_Q2/GogoPen/PenPower tablets
 727           - JASTEC USB Touch Controller/DigiTech DTR-02U
 728           - Zytronic controllers
 729           - Elo TouchSystems 2700 IntelliTouch
 730           - EasyTouch USB Touch Controller from Data Modul
 731           - e2i (Mimo monitors)
 732
 733           Have a look at <http://linux.chapter7.ch/touchkit/> for
 734           a usage description and the required user-space stuff.
 735
 736           To compile this driver as a module, choose M here: the
 737           module will be called usbtouchscreen.
 738
 739 config TOUCHSCREEN_MC13783
 740         tristate "Freescale MC13783 touchscreen input driver"
 741         depends on MFD_MC13XXX
 742         help
 743           Say Y here if you have an Freescale MC13783 PMIC on your
 744           board and want to use its touchscreen
 745
 746           If unsure, say N.
 747
 748           To compile this driver as a module, choose M here: the
 749           module will be called mc13783_ts.
 750
 751 config TOUCHSCREEN_USB_EGALAX
 752         default y
 753         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 754         depends on TOUCHSCREEN_USB_COMPOSITE
 755
 756 config TOUCHSCREEN_USB_PANJIT
 757         default y
 758         bool "PanJit device support" if EXPERT
 759         depends on TOUCHSCREEN_USB_COMPOSITE
 760
 761 config TOUCHSCREEN_USB_3M
 762         default y
 763         bool "3M/Microtouch EX II series device support" if EXPERT
 764         depends on TOUCHSCREEN_USB_COMPOSITE
 765
 766 config TOUCHSCREEN_USB_ITM
 767         default y
 768         bool "ITM device support" if EXPERT
 769         depends on TOUCHSCREEN_USB_COMPOSITE
 770
 771 config TOUCHSCREEN_USB_ETURBO
 772         default y
 773         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 774         depends on TOUCHSCREEN_USB_COMPOSITE
 775
 776 config TOUCHSCREEN_USB_GUNZE
 777         default y
 778         bool "Gunze AHL61 device support" if EXPERT
 779         depends on TOUCHSCREEN_USB_COMPOSITE
 780
 781 config TOUCHSCREEN_USB_DMC_TSC10
 782         default y
 783         bool "DMC TSC-10/25 device support" if EXPERT
 784         depends on TOUCHSCREEN_USB_COMPOSITE
 785
 786 config TOUCHSCREEN_USB_IRTOUCH
 787         default y
 788         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 789         depends on TOUCHSCREEN_USB_COMPOSITE
 790
 791 config TOUCHSCREEN_USB_IDEALTEK
 792         default y
 793         bool "IdealTEK URTC1000 device support" if EXPERT
 794         depends on TOUCHSCREEN_USB_COMPOSITE
 795
 796 config TOUCHSCREEN_USB_GENERAL_TOUCH
 797         default y
 798         bool "GeneralTouch Touchscreen device support" if EXPERT
 799         depends on TOUCHSCREEN_USB_COMPOSITE
 800
 801 config TOUCHSCREEN_USB_GOTOP
 802         default y
 803         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 804         depends on TOUCHSCREEN_USB_COMPOSITE
 805
 806 config TOUCHSCREEN_USB_JASTEC
 807         default y
 808         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 809         depends on TOUCHSCREEN_USB_COMPOSITE
 810
 811 config TOUCHSCREEN_USB_ELO
 812         default y
 813         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 814         depends on TOUCHSCREEN_USB_COMPOSITE
 815
 816 config TOUCHSCREEN_USB_E2I
 817         default y
 818         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 819         depends on TOUCHSCREEN_USB_COMPOSITE
 820
 821 config TOUCHSCREEN_USB_ZYTRONIC
 822         default y
 823         bool "Zytronic controller" if EXPERT
 824         depends on TOUCHSCREEN_USB_COMPOSITE
 825
 826 config TOUCHSCREEN_USB_ETT_TC45USB
 827         default y
 828         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 829         depends on TOUCHSCREEN_USB_COMPOSITE
 830
 831 config TOUCHSCREEN_USB_NEXIO
 832         default y
 833         bool "NEXIO/iNexio device support" if EXPERT
 834         depends on TOUCHSCREEN_USB_COMPOSITE
 835
 836 config TOUCHSCREEN_USB_EASYTOUCH
 837         default y
 838         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 839         depends on TOUCHSCREEN_USB_COMPOSITE
 840         help
 841           Say Y here if you have an EasyTouch USB Touch controller.
 842           If unsure, say N.
 843
 844 config TOUCHSCREEN_TOUCHIT213
 845         tristate "Sahara TouchIT-213 touchscreen"
 846         select SERIO
 847         help
 848           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 849
 850           If unsure, say N.
 851
 852           To compile this driver as a module, choose M here: the
 853           module will be called touchit213.
 854
 855 config TOUCHSCREEN_TSC_SERIO
 856         tristate "TSC-10/25/40 serial touchscreen support"
 857         select SERIO
 858         help
 859           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 860           to your system.
 861
 862           If unsure, say N.
 863
 864           To compile this driver as a module, choose M here: the
 865           module will be called tsc40.
 866
 867 config TOUCHSCREEN_TSC2005
 868         tristate "TSC2005 based touchscreens"
 869         depends on SPI_MASTER
 870         help
 871           Say Y here if you have a TSC2005 based touchscreen.
 872
 873           If unsure, say N.
 874
 875           To compile this driver as a module, choose M here: the
 876           module will be called tsc2005.
 877
 878 config TOUCHSCREEN_TSC2007
 879         tristate "TSC2007 based touchscreens"
 880         depends on I2C
 881         help
 882           Say Y here if you have a TSC2007 based touchscreen.
 883
 884           If unsure, say N.
 885
 886           To compile this driver as a module, choose M here: the
 887           module will be called tsc2007.
 888
 889 config TOUCHSCREEN_W90X900
 890         tristate "W90P910 touchscreen driver"
 891         depends on ARCH_W90X900
 892         help
 893           Say Y here if you have a W90P910 based touchscreen.
 894
 895           To compile this driver as a module, choose M here: the
 896           module will be called w90p910_ts.
 897
 898 config TOUCHSCREEN_PCAP
 899         tristate "Motorola PCAP touchscreen"
 900         depends on EZX_PCAP
 901         help
 902           Say Y here if you have a Motorola EZX telephone and
 903           want to enable support for the built-in touchscreen.
 904
 905           To compile this driver as a module, choose M here: the
 906           module will be called pcap_ts.
 907
 908 config TOUCHSCREEN_ST1232
 909         tristate "Sitronix ST1232 touchscreen controllers"
 910         depends on I2C
 911         help
 912           Say Y here if you want to support Sitronix ST1232
 913           touchscreen controller.
 914
 915           If unsure, say N.
 916
 917           To compile this driver as a module, choose M here: the
 918           module will be called st1232_ts.
 919
 920 config TOUCHSCREEN_STMPE
 921         tristate "STMicroelectronics STMPE touchscreens"
 922         depends on MFD_STMPE
 923         help
 924           Say Y here if you want support for STMicroelectronics
 925           STMPE touchscreen controllers.
 926
 927           To compile this driver as a module, choose M here: the
 928           module will be called stmpe-ts.
 929
 930 config TOUCHSCREEN_SUN4I
 931         tristate "Allwinner sun4i resistive touchscreen controller support"
 932         depends on ARCH_SUNXI || COMPILE_TEST
 933         depends on HWMON
 934         help
 935           This selects support for the resistive touchscreen controller
 936           found on Allwinner sunxi SoCs.
 937
 938           To compile this driver as a module, choose M here: the
 939           module will be called sun4i-ts.
 940
 941 config TOUCHSCREEN_SUR40
 942         tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 943         depends on USB
 944         select INPUT_POLLDEV
 945         help
 946           Say Y here if you want support for the Samsung SUR40 touchscreen
 947           (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
 948
 949           To compile this driver as a module, choose M here: the
 950           module will be called sur40.
 951
 952 config TOUCHSCREEN_TPS6507X
 953         tristate "TPS6507x based touchscreens"
 954         depends on I2C
 955         select INPUT_POLLDEV
 956         help
 957           Say Y here if you have a TPS6507x based touchscreen
 958           controller.
 959
 960           If unsure, say N.
 961
 962           To compile this driver as a module, choose M here: the
 963           module will be called tps6507x_ts.
 964
 965 config TOUCHSCREEN_ZFORCE
 966         tristate "Neonode zForce infrared touchscreens"
 967         depends on I2C
 968         depends on GPIOLIB
 969         help
 970           Say Y here if you have a touchscreen using the zforce
 971           infraread technology from Neonode.
 972
 973           If unsure, say N.
 974
 975           To compile this driver as a module, choose M here: the
 976           module will be called zforce_ts.
 977
 978 endif