drivers/leds/Kconfig

   1 menuconfig NEW_LEDS
   2         bool "LED Support"
   3         depends on HAS_IOMEM
   4         help
   5           Say Y to enable Linux LED support.  This allows control of supported
   6           LEDs from both userspace and optionally, by kernel events (triggers).
   7
   8           This is not related to standard keyboard LEDs which are controlled
   9           via the input system.
  10
  11 if NEW_LEDS
  12
  13 config LEDS_CLASS
  14         tristate "LED Class Support"
  15         help
  16           This option enables the led sysfs class in /sys/class/leds.  You'll
  17           need this to do anything useful with LEDs.  If unsure, say N.
  18
  19 comment "LED drivers"
  20
  21 config LEDS_CORGI
  22         tristate "LED Support for the Sharp SL-C7x0 series"
  23         depends on LEDS_CLASS && PXA_SHARP_C7xx
  24         help
  25           This option enables support for the LEDs on Sharp Zaurus
  26           SL-C7x0 series (C700, C750, C760, C860).
  27
  28 config LEDS_LOCOMO
  29         tristate "LED Support for Locomo device"
  30         depends on LEDS_CLASS && SHARP_LOCOMO
  31         help
  32           This option enables support for the LEDs on Sharp Locomo.
  33           Zaurus models SL-5500 and SL-5600.
  34
  35 config LEDS_SPITZ
  36         tristate "LED Support for the Sharp SL-Cxx00 series"
  37         depends on LEDS_CLASS && PXA_SHARP_Cxx00
  38         help
  39           This option enables support for the LEDs on Sharp Zaurus
  40           SL-Cxx00 series (C1000, C3000, C3100).
  41
  42 config LEDS_TOSA
  43         tristate "LED Support for the Sharp SL-6000 series"
  44         depends on LEDS_CLASS && PXA_SHARPSL
  45         help
  46           This option enables support for the LEDs on Sharp Zaurus
  47           SL-6000 series.
  48
  49 config LEDS_S3C24XX
  50         tristate "LED Support for Samsung S3C24XX GPIO LEDs"
  51         depends on LEDS_CLASS && ARCH_S3C2410
  52         help
  53           This option enables support for LEDs connected to GPIO lines
  54           on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
  55
  56 config LEDS_AMS_DELTA
  57         tristate "LED Support for the Amstrad Delta (E3)"
  58         depends on LEDS_CLASS && MACH_AMS_DELTA
  59         help
  60           This option enables support for the LEDs on Amstrad Delta (E3).
  61
  62 config LEDS_NET48XX
  63         tristate "LED Support for Soekris net48xx series Error LED"
  64         depends on LEDS_CLASS && SCx200_GPIO
  65         help
  66           This option enables support for the Soekris net4801 and net4826 error
  67           LED.
  68
  69 config LEDS_WRAP
  70         tristate "LED Support for the WRAP series LEDs"
  71         depends on LEDS_CLASS && SCx200_GPIO
  72         help
  73           This option enables support for the PCEngines WRAP programmable LEDs.
  74
  75 config LEDS_H1940
  76         tristate "LED Support for iPAQ H1940 device"
  77         depends on LEDS_CLASS && ARCH_H1940
  78         help
  79           This option enables support for the LEDs on the h1940.
  80
  81 config LEDS_COBALT_QUBE
  82         tristate "LED Support for the Cobalt Qube series front LED"
  83         depends on LEDS_CLASS && MIPS_COBALT
  84         help
  85           This option enables support for the front LED on Cobalt Qube series
  86
  87 config LEDS_COBALT_RAQ
  88         bool "LED Support for the Cobalt Raq series"
  89         depends on LEDS_CLASS && MIPS_COBALT
  90         select LEDS_TRIGGERS
  91         help
  92           This option enables support for the Cobalt Raq series LEDs.
  93
  94 config LEDS_HP6XX
  95         tristate "LED Support for the HP Jornada 6xx"
  96         depends on LEDS_CLASS && SH_HP6XX
  97         help
  98           This option enables led support for the handheld
  99           HP Jornada 620/660/680/690.
 100
 101 config LEDS_GPIO
 102         tristate "LED Support for GPIO connected LEDs"
 103         depends on LEDS_CLASS && GENERIC_GPIO
 104         help
 105           This option enables support for the LEDs connected to GPIO
 106           outputs. To be useful the particular board must have LEDs
 107           and they must be connected to the GPIO lines.
 108
 109 config LEDS_CM_X270
 110         tristate "LED Support for the CM-X270 LEDs"
 111         depends on LEDS_CLASS && MACH_ARMCORE
 112         help
 113           This option enables support for the CM-X270 LEDs.
 114
 115 config LEDS_CLEVO_MAIL
 116         tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
 117         depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
 118         help
 119           This driver makes the mail LED accessible from userspace
 120           programs through the leds subsystem. This LED have three
 121           known mode: off, blink at 0.5Hz and blink at 1Hz.
 122
 123           The driver supports two kinds of interface: using ledtrig-timer
 124           or through /sys/class/leds/clevo::mail/brightness. As this LED
 125           cannot change it's brightness it blinks instead. The brightness
 126           value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
 127           blink at 1Hz.
 128
 129           This module can drive the mail LED for the following notebooks:
 130
 131                 Clevo D410J
 132                 Clevo D410V
 133                 Clevo D400V/D470V (not tested, but might work)
 134                 Clevo M540N
 135                 Clevo M5x0N (not tested, but might work)
 136                 Positivo Mobile (Clevo M5x0V)
 137
 138           To compile this driver as a module, choose M here: the
 139           module will be called leds-clevo-mail.
 140
 141 comment "LED Triggers"
 142
 143 config LEDS_TRIGGERS
 144         bool "LED Trigger support"
 145         help
 146           This option enables trigger support for the leds class.
 147           These triggers allow kernel events to drive the LEDs and can
 148           be configured via sysfs. If unsure, say Y.
 149
 150 config LEDS_TRIGGER_TIMER
 151         tristate "LED Timer Trigger"
 152         depends on LEDS_TRIGGERS
 153         help
 154           This allows LEDs to be controlled by a programmable timer
 155           via sysfs. Some LED hardware can be programmed to start
 156           blinking the LED without any further software interaction.
 157           For more details read Documentation/leds-class.txt.
 158
 159           If unsure, say Y.
 160
 161 config LEDS_TRIGGER_IDE_DISK
 162         bool "LED IDE Disk Trigger"
 163         depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
 164         help
 165           This allows LEDs to be controlled by IDE disk activity.
 166           If unsure, say Y.
 167
 168 config LEDS_TRIGGER_HEARTBEAT
 169         tristate "LED Heartbeat Trigger"
 170         depends on LEDS_TRIGGERS
 171         help
 172           This allows LEDs to be controlled by a CPU load average.
 173           The flash frequency is a hyperbolic function of the 1-minute
 174           load average.
 175           If unsure, say Y.
 176
 177 endif # NEW_LEDS