drivers/macintosh/Kconfig

   1
   2 menu "Macintosh device drivers"
   3         depends on PPC || MAC
   4
   5 config ADB
   6         bool "Apple Desktop Bus (ADB) support"
   7         depends on MAC || (PPC_PMAC && PPC32)
   8         help
   9           Apple Desktop Bus (ADB) support is for support of devices which
  10           are connected to an ADB port.  ADB devices tend to have 4 pins.
  11           If you have an Apple Macintosh prior to the iMac, an iBook or
  12           PowerBook, or a "Blue and White G3", you probably want to say Y
  13           here.  Otherwise say N.
  14
  15 config ADB_MACII
  16         bool "Include Mac II ADB driver"
  17         depends on ADB && MAC
  18         help
  19           Say Y here if want your kernel to support Macintosh systems that use
  20           the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
  21           Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
  22           Centris 650.
  23
  24 config ADB_MACIISI
  25         bool "Include Mac IIsi ADB driver"
  26         depends on ADB && MAC
  27         help
  28           Say Y here if want your kernel to support Macintosh systems that use
  29           the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
  30           II, LC, LC II, LC III, Performa 460, and the Performa 600.
  31
  32 config ADB_IOP
  33         bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
  34         depends on ADB && MAC
  35         help
  36           The I/O Processor (IOP) is an Apple custom IC designed to provide
  37           intelligent support for I/O controllers.  It is described at
  38           <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
  39           support for it, say 'Y' here.
  40
  41 config ADB_PMU68K
  42         bool "Include PMU (Powerbook) ADB driver"
  43         depends on ADB && MAC
  44         help
  45           Say Y here if want your kernel to support the m68k based Powerbooks.
  46           This includes the PowerBook 140, PowerBook 145, PowerBook 150,
  47           PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
  48           PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
  49           PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
  50           PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
  51
  52 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  53 config ADB_CUDA
  54         bool "Support for CUDA based Macs and PowerMacs"
  55         depends on (ADB || PPC_PMAC) && !PPC_PMAC64
  56         help
  57           This provides support for CUDA based Macintosh and Power Macintosh
  58           systems.  This includes many m68k based Macs (Color Classic, Mac TV,
  59           Performa 475, Performa 520, Performa 550, Performa 575,
  60           Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
  61           Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
  62           the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
  63           models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
  64           even if your machine doesn't have a CUDA.
  65
  66           If unsure say Y.
  67
  68 config ADB_PMU
  69         bool "Support for PMU  based PowerMacs"
  70         depends on PPC_PMAC
  71         help
  72           On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
  73           PMU is an embedded microprocessor whose primary function is to
  74           control system power, and battery charging on the portable models.
  75           The PMU also controls the ADB (Apple Desktop Bus) which connects to
  76           the keyboard and mouse on some machines, as well as the non-volatile
  77           RAM and the RTC (real time clock) chip.  Say Y to enable support for
  78           this device; you should do so if your machine is one of those
  79           mentioned above.
  80
  81 config PMAC_SMU
  82         bool "Support for SMU  based PowerMacs"
  83         depends on PPC_PMAC64
  84         help
  85           This option adds support for the newer G5 iMacs and PowerMacs based
  86           on the "SMU" system control chip which replaces the old PMU.
  87           If you don't know, say Y.
  88
  89 config PMAC_APM_EMU
  90         tristate "APM emulation"
  91         depends on PPC_PMAC && PPC32 && PM
  92
  93 config PMAC_MEDIABAY
  94         bool "Support PowerBook hotswap media bay"
  95         depends on PPC_PMAC && PPC32
  96         help
  97           This option adds support for older PowerBook's hotswap media bay
  98           that can contains batteries, floppy drives, or IDE devices. PCI
  99           devices are not fully supported in the bay as I never had one to
 100           try with
 101
 102 # made a separate option since backlight may end up beeing used
 103 # on non-powerbook machines (but only on PMU based ones AFAIK)
 104 config PMAC_BACKLIGHT
 105         bool "Backlight control for LCD screens"
 106         depends on ADB_PMU && (BROKEN || !PPC64)
 107         help
 108           Say Y here to build in code to manage the LCD backlight on a
 109           Macintosh PowerBook.  With this code, the backlight will be turned
 110           on and off appropriately on power-management and lid-open/lid-closed
 111           events; also, the PowerBook button device will be enabled so you can
 112           change the screen brightness.
 113
 114 config ADB_MACIO
 115         bool "Include MacIO (CHRP) ADB driver"
 116         depends on ADB && PPC_CHRP && !PPC_PMAC64
 117         help
 118           Say Y here to include direct support for the ADB controller in the
 119           Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
 120           also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
 121           OpenPIC controller and two RS422/Geoports.)
 122
 123 config INPUT_ADBHID
 124         bool "Support for ADB input devices (keyboard, mice, ...)"
 125         depends on ADB && INPUT=y
 126         help
 127           Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 128           such as keyboards, mice, joysticks, trackpads  or graphic tablets
 129           handled by the input layer.  If you say Y here, make sure to say Y to
 130           the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
 131           "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
 132           support" (CONFIG_INPUT_EVDEV) as well.
 133
 134           If unsure, say Y.
 135
 136 config MAC_EMUMOUSEBTN
 137         bool "Support for mouse button 2+3 emulation"
 138         depends on INPUT_ADBHID
 139         help
 140           This provides generic support for emulating the 2nd and 3rd mouse
 141           button with keypresses.  If you say Y here, the emulation is still
 142           disabled by default.  The emulation is controlled by these sysctl
 143           entries:
 144           /proc/sys/dev/mac_hid/mouse_button_emulation
 145           /proc/sys/dev/mac_hid/mouse_button2_keycode
 146           /proc/sys/dev/mac_hid/mouse_button3_keycode
 147
 148           If you have an Apple machine with a 1-button mouse, say Y here.
 149
 150 config THERM_WINDTUNNEL
 151         tristate "Support for thermal management on Windtunnel G4s"
 152         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 153         help
 154           This driver provides some thermostat and fan control for the desktop
 155           G4 "Windtunnel"
 156
 157 config THERM_ADT746X
 158         tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 159         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 160         help
 161           This driver provides some thermostat and fan control for the
 162           iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
 163           better fan behaviour by default, and some manual control.
 164
 165 config THERM_PM72
 166         tristate "Support for thermal management on PowerMac G5"
 167         depends on I2C && I2C_POWERMAC && PPC_PMAC64
 168         help
 169           This driver provides thermostat and fan control for the desktop
 170           G5 machines.
 171
 172 config WINDFARM
 173         tristate "New PowerMac thermal control infrastructure"
 174
 175 config WINDFARM_PM81
 176         tristate "Support for thermal management on iMac G5"
 177         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 178         select I2C_POWERMAC
 179         help
 180           This driver provides thermal control for the iMacG5
 181
 182 config WINDFARM_PM91
 183         tristate "Support for thermal management on PowerMac9,1"
 184         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 185         select I2C_POWERMAC
 186         help
 187           This driver provides thermal control for the PowerMac9,1
 188           which is the recent (SMU based) single CPU desktop G5
 189
 190
 191 config ANSLCD
 192         tristate "Support for ANS LCD display"
 193         depends on ADB_CUDA && PPC_PMAC
 194
 195 endmenu