drivers/media/common/tuners/fc0012.c

   1 /*
   2  * Fitipower FC0012 tuner driver
   3  *
   4  * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19  */
  20
  21 #include "fc0012.h"
  22 #include "fc0012-priv.h"
  23
  24 static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
  25 {
  26         u8 buf[2] = {reg, val};
  27         struct i2c_msg msg = {
  28                 .addr = priv->addr, .flags = 0, .buf = buf, .len = 2
  29         };
  30
  31         if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
  32                 err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
  33                 return -EREMOTEIO;
  34         }
  35         return 0;
  36 }
  37
  38 static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
  39 {
  40         struct i2c_msg msg[2] = {
  41                 { .addr = priv->addr, .flags = 0, .buf = &reg, .len = 1 },
  42                 { .addr = priv->addr, .flags = I2C_M_RD, .buf = val, .len = 1 },
  43         };
  44
  45         if (i2c_transfer(priv->i2c, msg, 2) != 2) {
  46                 err("I2C read reg failed, reg: %02x", reg);
  47                 return -EREMOTEIO;
  48         }
  49         return 0;
  50 }
  51
  52 static int fc0012_release(struct dvb_frontend *fe)
  53 {
  54         kfree(fe->tuner_priv);
  55         fe->tuner_priv = NULL;
  56         return 0;
  57 }
  58
  59 static int fc0012_init(struct dvb_frontend *fe)
  60 {
  61         struct fc0012_priv *priv = fe->tuner_priv;
  62         int i, ret = 0;
  63         unsigned char reg[] = {
  64                 0x00,   /* dummy reg. 0 */
  65                 0x05,   /* reg. 0x01 */
  66                 0x10,   /* reg. 0x02 */
  67                 0x00,   /* reg. 0x03 */
  68                 0x00,   /* reg. 0x04 */
  69                 0x0f,   /* reg. 0x05: may also be 0x0a */
  70                 0x00,   /* reg. 0x06: divider 2, VCO slow */
  71                 0x00,   /* reg. 0x07: may also be 0x0f */
  72                 0xff,   /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
  73                            Loop Bw 1/8 */
  74                 0x6e,   /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
  75                 0xb8,   /* reg. 0x0a: Disable LO Test Buffer */
  76                 0x82,   /* reg. 0x0b: Output Clock is same as clock frequency,
  77                            may also be 0x83 */
  78                 0xfc,   /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
  79                 0x02,   /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
  80                 0x00,   /* reg. 0x0e */
  81                 0x00,   /* reg. 0x0f */
  82                 0x00,   /* reg. 0x10: may also be 0x0d */
  83                 0x00,   /* reg. 0x11 */
  84                 0x1f,   /* reg. 0x12: Set to maximum gain */
  85                 0x08,   /* reg. 0x13: Set to Middle Gain: 0x08,
  86                            Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
  87                 0x00,   /* reg. 0x14 */
  88                 0x04,   /* reg. 0x15: Enable LNA COMPS */
  89         };
  90
  91         switch (priv->xtal_freq) {
  92         case FC_XTAL_27_MHZ:
  93         case FC_XTAL_28_8_MHZ:
  94                 reg[0x07] |= 0x20;
  95                 break;
  96         case FC_XTAL_36_MHZ:
  97         default:
  98                 break;
  99         }
 100
 101         if (priv->dual_master)
 102                 reg[0x0c] |= 0x02;
 103
 104         if (fe->ops.i2c_gate_ctrl)
 105                 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
 106
 107         for (i = 1; i < sizeof(reg); i++) {
 108                 ret = fc0012_writereg(priv, i, reg[i]);
 109                 if (ret)
 110                         break;
 111         }
 112
 113         if (fe->ops.i2c_gate_ctrl)
 114                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 115
 116         if (ret)
 117                 err("fc0012_writereg failed: %d", ret);
 118
 119         return ret;
 120 }
 121
 122 static int fc0012_sleep(struct dvb_frontend *fe)
 123 {
 124         /* nothing to do here */
 125         return 0;
 126 }
 127
 128 static int fc0012_set_params(struct dvb_frontend *fe)
 129 {
 130         struct fc0012_priv *priv = fe->tuner_priv;
 131         int i, ret = 0;
 132         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 133         u32 freq = p->frequency / 1000;
 134         u32 delsys = p->delivery_system;
 135         unsigned char reg[7], am, pm, multi, tmp;
 136         unsigned long f_vco;
 137         unsigned short xtal_freq_khz_2, xin, xdiv;
 138         int vco_select = false;
 139
 140         if (fe->callback) {
 141                 ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
 142                         FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
 143                 if (ret)
 144                         goto exit;
 145         }
 146
 147         switch (priv->xtal_freq) {
 148         case FC_XTAL_27_MHZ:
 149                 xtal_freq_khz_2 = 27000 / 2;
 150                 break;
 151         case FC_XTAL_36_MHZ:
 152                 xtal_freq_khz_2 = 36000 / 2;
 153                 break;
 154         case FC_XTAL_28_8_MHZ:
 155         default:
 156                 xtal_freq_khz_2 = 28800 / 2;
 157                 break;
 158         }
 159
 160         /* select frequency divider and the frequency of VCO */
 161         if (freq < 37084) {             /* freq * 96 < 3560000 */
 162                 multi = 96;
 163                 reg[5] = 0x82;
 164                 reg[6] = 0x00;
 165         } else if (freq < 55625) {      /* freq * 64 < 3560000 */
 166                 multi = 64;
 167                 reg[5] = 0x82;
 168                 reg[6] = 0x02;
 169         } else if (freq < 74167) {      /* freq * 48 < 3560000 */
 170                 multi = 48;
 171                 reg[5] = 0x42;
 172                 reg[6] = 0x00;
 173         } else if (freq < 111250) {     /* freq * 32 < 3560000 */
 174                 multi = 32;
 175                 reg[5] = 0x42;
 176                 reg[6] = 0x02;
 177         } else if (freq < 148334) {     /* freq * 24 < 3560000 */
 178                 multi = 24;
 179                 reg[5] = 0x22;
 180                 reg[6] = 0x00;
 181         } else if (freq < 222500) {     /* freq * 16 < 3560000 */
 182                 multi = 16;
 183                 reg[5] = 0x22;
 184                 reg[6] = 0x02;
 185         } else if (freq < 296667) {     /* freq * 12 < 3560000 */
 186                 multi = 12;
 187                 reg[5] = 0x12;
 188                 reg[6] = 0x00;
 189         } else if (freq < 445000) {     /* freq * 8 < 3560000 */
 190                 multi = 8;
 191                 reg[5] = 0x12;
 192                 reg[6] = 0x02;
 193         } else if (freq < 593334) {     /* freq * 6 < 3560000 */
 194                 multi = 6;
 195                 reg[5] = 0x0a;
 196                 reg[6] = 0x00;
 197         } else {
 198                 multi = 4;
 199                 reg[5] = 0x0a;
 200                 reg[6] = 0x02;
 201         }
 202
 203         f_vco = freq * multi;
 204
 205         if (f_vco >= 3060000) {
 206                 reg[6] |= 0x08;
 207                 vco_select = true;
 208         }
 209
 210         if (freq >= 45000) {
 211                 /* From divided value (XDIV) determined the FA and FP value */
 212                 xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
 213                 if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
 214                         xdiv++;
 215
 216                 pm = (unsigned char)(xdiv / 8);
 217                 am = (unsigned char)(xdiv - (8 * pm));
 218
 219                 if (am < 2) {
 220                         reg[1] = am + 8;
 221                         reg[2] = pm - 1;
 222                 } else {
 223                         reg[1] = am;
 224                         reg[2] = pm;
 225                 }
 226         } else {
 227                 /* fix for frequency less than 45 MHz */
 228                 reg[1] = 0x06;
 229                 reg[2] = 0x11;
 230         }
 231
 232         /* fix clock out */
 233         reg[6] |= 0x20;
 234
 235         /* From VCO frequency determines the XIN ( fractional part of Delta
 236            Sigma PLL) and divided value (XDIV) */
 237         xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
 238         xin = (xin << 15) / xtal_freq_khz_2;
 239         if (xin >= 16384)
 240                 xin += 32768;
 241
 242         reg[3] = xin >> 8;      /* xin with 9 bit resolution */
 243         reg[4] = xin & 0xff;
 244
 245         if (delsys == SYS_DVBT) {
 246                 reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
 247                 switch (p->bandwidth_hz) {
 248                 case 6000000:
 249                         reg[6] |= 0x80;
 250                         break;
 251                 case 7000000:
 252                         reg[6] |= 0x40;
 253                         break;
 254                 case 8000000:
 255                 default:
 256                         break;
 257                 }
 258         } else {
 259                 err("%s: modulation type not supported!", __func__);
 260                 return -EINVAL;
 261         }
 262
 263         /* modified for Realtek demod */
 264         reg[5] |= 0x07;
 265
 266         if (fe->ops.i2c_gate_ctrl)
 267                 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
 268
 269         for (i = 1; i <= 6; i++) {
 270                 ret = fc0012_writereg(priv, i, reg[i]);
 271                 if (ret)
 272                         goto exit;
 273         }
 274
 275         /* VCO Calibration */
 276         ret = fc0012_writereg(priv, 0x0e, 0x80);
 277         if (!ret)
 278                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 279
 280         /* VCO Re-Calibration if needed */
 281         if (!ret)
 282                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 283
 284         if (!ret) {
 285                 msleep(10);
 286                 ret = fc0012_readreg(priv, 0x0e, &tmp);
 287         }
 288         if (ret)
 289                 goto exit;
 290
 291         /* vco selection */
 292         tmp &= 0x3f;
 293
 294         if (vco_select) {
 295                 if (tmp > 0x3c) {
 296                         reg[6] &= ~0x08;
 297                         ret = fc0012_writereg(priv, 0x06, reg[6]);
 298                         if (!ret)
 299                                 ret = fc0012_writereg(priv, 0x0e, 0x80);
 300                         if (!ret)
 301                                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 302                 }
 303         } else {
 304                 if (tmp < 0x02) {
 305                         reg[6] |= 0x08;
 306                         ret = fc0012_writereg(priv, 0x06, reg[6]);
 307                         if (!ret)
 308                                 ret = fc0012_writereg(priv, 0x0e, 0x80);
 309                         if (!ret)
 310                                 ret = fc0012_writereg(priv, 0x0e, 0x00);
 311                 }
 312         }
 313
 314         priv->frequency = p->frequency;
 315         priv->bandwidth = p->bandwidth_hz;
 316
 317 exit:
 318         if (fe->ops.i2c_gate_ctrl)
 319                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 320         if (ret)
 321                 warn("%s: failed: %d", __func__, ret);
 322         return ret;
 323 }
 324
 325 static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 326 {
 327         struct fc0012_priv *priv = fe->tuner_priv;
 328         *frequency = priv->frequency;
 329         return 0;
 330 }
 331
 332 static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
 333 {
 334         /* CHECK: always ? */
 335         *frequency = 0;
 336         return 0;
 337 }
 338
 339 static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 340 {
 341         struct fc0012_priv *priv = fe->tuner_priv;
 342         *bandwidth = priv->bandwidth;
 343         return 0;
 344 }
 345
 346 #define INPUT_ADC_LEVEL -8
 347
 348 static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
 349 {
 350         struct fc0012_priv *priv = fe->tuner_priv;
 351         int ret;
 352         unsigned char tmp;
 353         int int_temp, lna_gain, int_lna, tot_agc_gain, power;
 354         const int fc0012_lna_gain_table[] = {
 355                 /* low gain */
 356                 -63, -58, -99, -73,
 357                 -63, -65, -54, -60,
 358                 /* middle gain */
 359                  71,  70,  68,  67,
 360                  65,  63,  61,  58,
 361                 /* high gain */
 362                 197, 191, 188, 186,
 363                 184, 182, 181, 179,
 364         };
 365
 366         if (fe->ops.i2c_gate_ctrl)
 367                 fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
 368
 369         ret = fc0012_writereg(priv, 0x12, 0x00);
 370         if (ret)
 371                 goto err;
 372
 373         ret = fc0012_readreg(priv, 0x12, &tmp);
 374         if (ret)
 375                 goto err;
 376         int_temp = tmp;
 377
 378         ret = fc0012_readreg(priv, 0x13, &tmp);
 379         if (ret)
 380                 goto err;
 381         lna_gain = tmp & 0x1f;
 382
 383         if (fe->ops.i2c_gate_ctrl)
 384                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 385
 386         if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) {
 387                 int_lna = fc0012_lna_gain_table[lna_gain];
 388                 tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
 389                                 (int_temp & 0x1f)) * 2;
 390                 power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
 391
 392                 if (power >= 45)
 393                         *strength = 255;        /* 100% */
 394                 else if (power < -95)
 395                         *strength = 0;
 396                 else
 397                         *strength = (power + 95) * 255 / 140;
 398
 399                 *strength |= *strength << 8;
 400         } else {
 401                 ret = -1;
 402         }
 403
 404         goto exit;
 405
 406 err:
 407         if (fe->ops.i2c_gate_ctrl)
 408                 fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
 409 exit:
 410         if (ret)
 411                 warn("%s: failed: %d", __func__, ret);
 412         return ret;
 413 }
 414
 415 static const struct dvb_tuner_ops fc0012_tuner_ops = {
 416         .info = {
 417                 .name           = "Fitipower FC0012",
 418
 419                 .frequency_min  = 37000000,     /* estimate */
 420                 .frequency_max  = 862000000,    /* estimate */
 421                 .frequency_step = 0,
 422         },
 423
 424         .release        = fc0012_release,
 425
 426         .init           = fc0012_init,
 427         .sleep          = fc0012_sleep,
 428
 429         .set_params     = fc0012_set_params,
 430
 431         .get_frequency  = fc0012_get_frequency,
 432         .get_if_frequency = fc0012_get_if_frequency,
 433         .get_bandwidth  = fc0012_get_bandwidth,
 434
 435         .get_rf_strength = fc0012_get_rf_strength,
 436 };
 437
 438 struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
 439         struct i2c_adapter *i2c, u8 i2c_address, int dual_master,
 440         enum fc001x_xtal_freq xtal_freq)
 441 {
 442         struct fc0012_priv *priv = NULL;
 443
 444         priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
 445         if (priv == NULL)
 446                 return NULL;
 447
 448         priv->i2c = i2c;
 449         priv->dual_master = dual_master;
 450         priv->addr = i2c_address;
 451         priv->xtal_freq = xtal_freq;
 452
 453         info("Fitipower FC0012 successfully attached.");
 454
 455         fe->tuner_priv = priv;
 456
 457         memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
 458                 sizeof(struct dvb_tuner_ops));
 459
 460         return fe;
 461 }
 462 EXPORT_SYMBOL(fc0012_attach);
 463
 464 MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
 465 MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
 466 MODULE_LICENSE("GPL");
 467 MODULE_VERSION("0.6");