projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
[PATCH] dvb: stv0299: reduce i2c xfer and set register 0x12 from inittab
[deliverable/linux.git] / drivers / media / dvb / ttpci / budget-av.c
1 /*
2 * budget-av.c: driver for the SAA7146 based Budget DVB cards
3 * with analog video in
4 *
5 * Compiled from various sources by Michael Hunold <michael@mihu.de>
6 *
7 * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
8 * Andrew de Quincey <adq_dvb@lidskialf.net>
9 *
10 * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
11 *
12 * Copyright (C) 1999-2002 Ralph Metzler
13 * & Marcus Metzler for convergence integrated media GmbH
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version 2
18 * of the License, or (at your option) any later version.
19 *
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 *
27 * You should have received a copy of the GNU General Public License
28 * along with this program; if not, write to the Free Software
29 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
30 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
31 *
32 *
33 * the project's page is at http://www.linuxtv.org/dvb/
34 */
35
36 #include "budget.h"
37 #include "stv0299.h"
38 #include "tda10021.h"
39 #include "tda1004x.h"
40 #include <media/saa7146_vv.h>
41 #include <linux/module.h>
42 #include <linux/errno.h>
43 #include <linux/slab.h>
44 #include <linux/interrupt.h>
45 #include <linux/input.h>
46 #include <linux/spinlock.h>
47
48 #include "dvb_ca_en50221.h"
49
50 #define DEBICICAM 0x02420000
51
52 struct budget_av {
53 struct budget budget;
54 struct video_device *vd;
55 int cur_input;
56 int has_saa7113;
57 struct tasklet_struct ciintf_irq_tasklet;
58 int slot_status;
59 struct dvb_ca_en50221 ca;
60 };
61
62 /* GPIO CI Connections:
63 * 0 - Vcc/Reset (Reset is controlled by capacitor)
64 * 1 - Attribute Memory
65 * 2 - Card Enable (Active Low)
66 * 3 - Card Detect
67 */
68
69 /****************************************************************************
70 * INITIALIZATION
71 ****************************************************************************/
72
73 static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
74 {
75 u8 mm1[] = { 0x00 };
76 u8 mm2[] = { 0x00 };
77 struct i2c_msg msgs[2];
78
79 msgs[0].flags = 0;
80 msgs[1].flags = I2C_M_RD;
81 msgs[0].addr = msgs[1].addr = id / 2;
82 mm1[0] = reg;
83 msgs[0].len = 1;
84 msgs[1].len = 1;
85 msgs[0].buf = mm1;
86 msgs[1].buf = mm2;
87
88 i2c_transfer(i2c, msgs, 2);
89
90 return mm2[0];
91 }
92
93 static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
94 {
95 u8 mm1[] = { reg };
96 struct i2c_msg msgs[2] = {
97 {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
98 {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
99 };
100
101 if (i2c_transfer(i2c, msgs, 2) != 2)
102 return -EIO;
103
104 return 0;
105 }
106
107 static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
108 {
109 u8 msg[2] = { reg, val };
110 struct i2c_msg msgs;
111
112 msgs.flags = 0;
113 msgs.addr = id / 2;
114 msgs.len = 2;
115 msgs.buf = msg;
116 return i2c_transfer(i2c, &msgs, 1);
117 }
118
119 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
120 {
121 struct budget_av *budget_av = (struct budget_av *) ca->data;
122 int result;
123
124 if (slot != 0)
125 return -EINVAL;
126
127 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
128 udelay(1);
129
130 result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
131
132 if (result == -ETIMEDOUT)
133 budget_av->slot_status = 0;
134 return result;
135 }
136
137 static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
138 {
139 struct budget_av *budget_av = (struct budget_av *) ca->data;
140 int result;
141
142 if (slot != 0)
143 return -EINVAL;
144
145 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
146 udelay(1);
147
148 result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
149
150 if (result == -ETIMEDOUT)
151 budget_av->slot_status = 0;
152 return result;
153 }
154
155 static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
156 {
157 struct budget_av *budget_av = (struct budget_av *) ca->data;
158 int result;
159
160 if (slot != 0)
161 return -EINVAL;
162
163 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
164 udelay(1);
165
166 result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
167
168 if (result == -ETIMEDOUT)
169 budget_av->slot_status = 0;
170 return result;
171 }
172
173 static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
174 {
175 struct budget_av *budget_av = (struct budget_av *) ca->data;
176 int result;
177
178 if (slot != 0)
179 return -EINVAL;
180
181 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
182 udelay(1);
183
184 result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
185
186 if (result == -ETIMEDOUT)
187 budget_av->slot_status = 0;
188 return result;
189 }
190
191 static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
192 {
193 struct budget_av *budget_av = (struct budget_av *) ca->data;
194 struct saa7146_dev *saa = budget_av->budget.dev;
195 int timeout = 500; // 5 seconds (4.4.6 Ready)
196
197 if (slot != 0)
198 return -EINVAL;
199
200 dprintk(1, "ciintf_slot_reset\n");
201
202 saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
203
204 saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
205 msleep(2);
206 saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
207 msleep(20); /* 20 ms Vcc settling time */
208
209 saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
210
211 /* This should have been based on pin 16 READY of the pcmcia port,
212 * but AFAICS it is not routed to the saa7146 */
213 while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
214 msleep(100);
215
216 if (timeout <= 0)
217 {
218 printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
219 saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
220 return -ETIMEDOUT;
221 }
222
223 return 0;
224 }
225
226 static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
227 {
228 struct budget_av *budget_av = (struct budget_av *) ca->data;
229 struct saa7146_dev *saa = budget_av->budget.dev;
230
231 if (slot != 0)
232 return -EINVAL;
233
234 dprintk(1, "ciintf_slot_shutdown\n");
235
236 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
237 budget_av->slot_status = 0;
238 return 0;
239 }
240
241 static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
242 {
243 struct budget_av *budget_av = (struct budget_av *) ca->data;
244 struct saa7146_dev *saa = budget_av->budget.dev;
245
246 if (slot != 0)
247 return -EINVAL;
248
249 dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
250
251 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
252 return 0;
253 }
254
255 static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
256 {
257 struct budget_av *budget_av = (struct budget_av *) ca->data;
258 struct saa7146_dev *saa = budget_av->budget.dev;
259
260 if (slot != 0)
261 return -EINVAL;
262
263 if (!budget_av->slot_status) {
264 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
265 udelay(1);
266 if (saa7146_read(saa, PSR) & MASK_06)
267 {
268 printk(KERN_INFO "budget-av: cam inserted\n");
269 budget_av->slot_status = 1;
270 }
271 saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
272 } else if (!open) {
273 saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
274 if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
275 {
276 printk(KERN_INFO "budget-av: cam ejected\n");
277 saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
278 budget_av->slot_status = 0;
279 }
280 }
281
282 if (budget_av->slot_status == 1)
283 return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
284
285 return 0;
286 }
287
288 static int ciintf_init(struct budget_av *budget_av)
289 {
290 struct saa7146_dev *saa = budget_av->budget.dev;
291 int result;
292
293 memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
294
295 saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
296 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
297 saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
298 saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
299
300 /* Enable DEBI pins */
301 saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
302
303 /* register CI interface */
304 budget_av->ca.owner = THIS_MODULE;
305 budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
306 budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
307 budget_av->ca.read_cam_control = ciintf_read_cam_control;
308 budget_av->ca.write_cam_control = ciintf_write_cam_control;
309 budget_av->ca.slot_reset = ciintf_slot_reset;
310 budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
311 budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
312 budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
313 budget_av->ca.data = budget_av;
314
315 if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
316 &budget_av->ca, 0, 1)) != 0) {
317 printk(KERN_ERR "budget-av: ci initialisation failed.\n");
318 goto error;
319 }
320
321 printk(KERN_INFO "budget-av: ci interface initialised.\n");
322 budget_av->budget.ci_present = 1;
323 return 0;
324
325 error:
326 saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
327 return result;
328 }
329
330 static void ciintf_deinit(struct budget_av *budget_av)
331 {
332 struct saa7146_dev *saa = budget_av->budget.dev;
333
334 saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
335 saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
336 saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
337 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
338
339 /* release the CA device */
340 dvb_ca_en50221_release(&budget_av->ca);
341
342 /* disable DEBI pins */
343 saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
344 }
345
346
347 static const u8 saa7113_tab[] = {
348 0x01, 0x08,
349 0x02, 0xc0,
350 0x03, 0x33,
351 0x04, 0x00,
352 0x05, 0x00,
353 0x06, 0xeb,
354 0x07, 0xe0,
355 0x08, 0x28,
356 0x09, 0x00,
357 0x0a, 0x80,
358 0x0b, 0x47,
359 0x0c, 0x40,
360 0x0d, 0x00,
361 0x0e, 0x01,
362 0x0f, 0x44,
363
364 0x10, 0x08,
365 0x11, 0x0c,
366 0x12, 0x7b,
367 0x13, 0x00,
368 0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
369
370 0x57, 0xff,
371 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
372 0x5b, 0x83, 0x5e, 0x00,
373 0xff
374 };
375
376 static int saa7113_init(struct budget_av *budget_av)
377 {
378 struct budget *budget = &budget_av->budget;
379 struct saa7146_dev *saa = budget->dev;
380 const u8 *data = saa7113_tab;
381
382 saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
383 msleep(200);
384
385 if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
386 dprintk(1, "saa7113 not found on KNC card\n");
387 return -ENODEV;
388 }
389
390 dprintk(1, "saa7113 detected and initializing\n");
391
392 while (*data != 0xff) {
393 i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
394 data += 2;
395 }
396
397 dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
398
399 return 0;
400 }
401
402 static int saa7113_setinput(struct budget_av *budget_av, int input)
403 {
404 struct budget *budget = &budget_av->budget;
405
406 if (1 != budget_av->has_saa7113)
407 return -ENODEV;
408
409 if (input == 1) {
410 i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
411 i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
412 } else if (input == 0) {
413 i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
414 i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
415 } else
416 return -EINVAL;
417
418 budget_av->cur_input = input;
419 return 0;
420 }
421
422
423 static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
424 {
425 u8 aclk = 0;
426 u8 bclk = 0;
427 u8 m1;
428
429 aclk = 0xb5;
430 if (srate < 2000000)
431 bclk = 0x86;
432 else if (srate < 5000000)
433 bclk = 0x89;
434 else if (srate < 15000000)
435 bclk = 0x8f;
436 else if (srate < 45000000)
437 bclk = 0x95;
438
439 m1 = 0x14;
440 if (srate < 4000000)
441 m1 = 0x10;
442
443 stv0299_writereg(fe, 0x13, aclk);
444 stv0299_writereg(fe, 0x14, bclk);
445 stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
446 stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
447 stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
448 stv0299_writereg(fe, 0x0f, 0x80 | m1);
449
450 return 0;
451 }
452
453 static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
454 struct i2c_adapter *i2c,
455 struct dvb_frontend_parameters *params)
456 {
457 u32 div;
458 u8 buf[4];
459 struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
460
461 if ((params->frequency < 950000) || (params->frequency > 2150000))
462 return -EINVAL;
463
464 div = (params->frequency + (125 - 1)) / 125; // round correctly
465 buf[0] = (div >> 8) & 0x7f;
466 buf[1] = div & 0xff;
467 buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
468 buf[3] = 0x20;
469
470 if (params->u.qpsk.symbol_rate < 4000000)
471 buf[3] |= 1;
472
473 if (params->frequency < 1250000)
474 buf[3] |= 0;
475 else if (params->frequency < 1550000)
476 buf[3] |= 0x40;
477 else if (params->frequency < 2050000)
478 buf[3] |= 0x80;
479 else if (params->frequency < 2150000)
480 buf[3] |= 0xC0;
481
482 if (i2c_transfer(i2c, &msg, 1) != 1)
483 return -EIO;
484 return 0;
485 }
486
487 static u8 typhoon_cinergy1200s_inittab[] = {
488 0x01, 0x15,
489 0x02, 0x30,
490 0x03, 0x00,
491 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
492 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
493 0x06, 0x40, /* DAC not used, set to high impendance mode */
494 0x07, 0x00, /* DAC LSB */
495 0x08, 0x40, /* DiSEqC off */
496 0x09, 0x00, /* FIFO */
497 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
498 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
499 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
500 0x10, 0x3f, // AGC2 0x3d
501 0x11, 0x84,
502 0x12, 0xb9,
503 0x15, 0xc9, // lock detector threshold
504 0x16, 0x00,
505 0x17, 0x00,
506 0x18, 0x00,
507 0x19, 0x00,
508 0x1a, 0x00,
509 0x1f, 0x50,
510 0x20, 0x00,
511 0x21, 0x00,
512 0x22, 0x00,
513 0x23, 0x00,
514 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
515 0x29, 0x1e, // 1/2 threshold
516 0x2a, 0x14, // 2/3 threshold
517 0x2b, 0x0f, // 3/4 threshold
518 0x2c, 0x09, // 5/6 threshold
519 0x2d, 0x05, // 7/8 threshold
520 0x2e, 0x01,
521 0x31, 0x1f, // test all FECs
522 0x32, 0x19, // viterbi and synchro search
523 0x33, 0xfc, // rs control
524 0x34, 0x93, // error control
525 0x0f, 0x92,
526 0xff, 0xff
527 };
528
529 static struct stv0299_config typhoon_config = {
530 .demod_address = 0x68,
531 .inittab = typhoon_cinergy1200s_inittab,
532 .mclk = 88000000UL,
533 .invert = 0,
534 .skip_reinit = 0,
535 .lock_output = STV0229_LOCKOUTPUT_1,
536 .volt13_op0_op1 = STV0299_VOLT13_OP0,
537 .min_delay_ms = 100,
538 .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
539 .pll_set = philips_su1278_ty_ci_pll_set,
540 };
541
542
543 static struct stv0299_config cinergy_1200s_config = {
544 .demod_address = 0x68,
545 .inittab = typhoon_cinergy1200s_inittab,
546 .mclk = 88000000UL,
547 .invert = 0,
548 .skip_reinit = 0,
549 .lock_output = STV0229_LOCKOUTPUT_0,
550 .volt13_op0_op1 = STV0299_VOLT13_OP0,
551 .min_delay_ms = 100,
552 .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
553 .pll_set = philips_su1278_ty_ci_pll_set,
554 };
555
556
557 static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
558 {
559 struct budget *budget = (struct budget *) fe->dvb->priv;
560 u8 buf[4];
561 struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
562
563 #define TUNER_MUL 62500
564
565 u32 div = (params->frequency + 36125000 + TUNER_MUL / 2) / TUNER_MUL;
566
567 buf[0] = (div >> 8) & 0x7f;
568 buf[1] = div & 0xff;
569 buf[2] = 0x86;
570 buf[3] = (params->frequency < 150000000 ? 0x01 :
571 params->frequency < 445000000 ? 0x02 : 0x04);
572
573 if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
574 return -EIO;
575 return 0;
576 }
577
578 static struct tda10021_config philips_cu1216_config = {
579 .demod_address = 0x0c,
580 .pll_set = philips_cu1216_pll_set,
581 };
582
583
584
585
586 static int philips_tu1216_pll_init(struct dvb_frontend *fe)
587 {
588 struct budget *budget = (struct budget *) fe->dvb->priv;
589 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
590 struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
591
592 // setup PLL configuration
593 if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
594 return -EIO;
595 msleep(1);
596
597 return 0;
598 }
599
600 static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
601 {
602 struct budget *budget = (struct budget *) fe->dvb->priv;
603 u8 tuner_buf[4];
604 struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
605 sizeof(tuner_buf) };
606 int tuner_frequency = 0;
607 u8 band, cp, filter;
608
609 // determine charge pump
610 tuner_frequency = params->frequency + 36166000;
611 if (tuner_frequency < 87000000)
612 return -EINVAL;
613 else if (tuner_frequency < 130000000)
614 cp = 3;
615 else if (tuner_frequency < 160000000)
616 cp = 5;
617 else if (tuner_frequency < 200000000)
618 cp = 6;
619 else if (tuner_frequency < 290000000)
620 cp = 3;
621 else if (tuner_frequency < 420000000)
622 cp = 5;
623 else if (tuner_frequency < 480000000)
624 cp = 6;
625 else if (tuner_frequency < 620000000)
626 cp = 3;
627 else if (tuner_frequency < 830000000)
628 cp = 5;
629 else if (tuner_frequency < 895000000)
630 cp = 7;
631 else
632 return -EINVAL;
633
634 // determine band
635 if (params->frequency < 49000000)
636 return -EINVAL;
637 else if (params->frequency < 161000000)
638 band = 1;
639 else if (params->frequency < 444000000)
640 band = 2;
641 else if (params->frequency < 861000000)
642 band = 4;
643 else
644 return -EINVAL;
645
646 // setup PLL filter
647 switch (params->u.ofdm.bandwidth) {
648 case BANDWIDTH_6_MHZ:
649 filter = 0;
650 break;
651
652 case BANDWIDTH_7_MHZ:
653 filter = 0;
654 break;
655
656 case BANDWIDTH_8_MHZ:
657 filter = 1;
658 break;
659
660 default:
661 return -EINVAL;
662 }
663
664 // calculate divisor
665 // ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
666 tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
667
668 // setup tuner buffer
669 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
670 tuner_buf[1] = tuner_frequency & 0xff;
671 tuner_buf[2] = 0xca;
672 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
673
674 if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
675 return -EIO;
676
677 msleep(1);
678 return 0;
679 }
680
681 static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
682 const struct firmware **fw, char *name)
683 {
684 struct budget *budget = (struct budget *) fe->dvb->priv;
685
686 return request_firmware(fw, name, &budget->dev->pci->dev);
687 }
688
689 static struct tda1004x_config philips_tu1216_config = {
690
691 .demod_address = 0x8,
692 .invert = 1,
693 .invert_oclk = 1,
694 .xtal_freq = TDA10046_XTAL_4M,
695 .agc_config = TDA10046_AGC_DEFAULT,
696 .if_freq = TDA10046_FREQ_3617,
697 .pll_init = philips_tu1216_pll_init,
698 .pll_set = philips_tu1216_pll_set,
699 .pll_sleep = NULL,
700 .request_firmware = philips_tu1216_request_firmware,
701 };
702
703
704
705
706 static u8 read_pwm(struct budget_av *budget_av)
707 {
708 u8 b = 0xff;
709 u8 pwm;
710 struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
711 {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
712 };
713
714 if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
715 || (pwm == 0xff))
716 pwm = 0x48;
717
718 return pwm;
719 }
720
721 #define SUBID_DVBS_KNC1 0x0010
722 #define SUBID_DVBS_KNC1_PLUS 0x0011
723 #define SUBID_DVBS_TYPHOON 0x4f56
724 #define SUBID_DVBS_CINERGY1200 0x1154
725
726 #define SUBID_DVBC_KNC1 0x0020
727 #define SUBID_DVBC_KNC1_PLUS 0x0021
728 #define SUBID_DVBC_CINERGY1200 0x1156
729
730 #define SUBID_DVBT_KNC1_PLUS 0x0031
731 #define SUBID_DVBT_KNC1 0x0030
732 #define SUBID_DVBT_CINERGY1200 0x1157
733
734 static void frontend_init(struct budget_av *budget_av)
735 {
736 struct saa7146_dev * saa = budget_av->budget.dev;
737 struct dvb_frontend * fe = NULL;
738
739 switch (saa->pci->subsystem_device) {
740 case SUBID_DVBS_KNC1_PLUS:
741 case SUBID_DVBC_KNC1_PLUS:
742 case SUBID_DVBT_KNC1_PLUS:
743 // Enable / PowerON Frontend
744 saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
745 saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
746 break;
747 }
748
749 switch (saa->pci->subsystem_device) {
750
751 case SUBID_DVBS_KNC1:
752 case SUBID_DVBS_KNC1_PLUS:
753 case SUBID_DVBS_TYPHOON:
754 fe = stv0299_attach(&typhoon_config,
755 &budget_av->budget.i2c_adap);
756 break;
757
758 case SUBID_DVBS_CINERGY1200:
759 fe = stv0299_attach(&cinergy_1200s_config,
760 &budget_av->budget.i2c_adap);
761 break;
762
763 case SUBID_DVBC_KNC1:
764 case SUBID_DVBC_KNC1_PLUS:
765 fe = tda10021_attach(&philips_cu1216_config,
766 &budget_av->budget.i2c_adap,
767 read_pwm(budget_av));
768 break;
769
770 case SUBID_DVBT_KNC1:
771 case SUBID_DVBT_KNC1_PLUS:
772 fe = tda10046_attach(&philips_tu1216_config,
773 &budget_av->budget.i2c_adap);
774 break;
775
776 case SUBID_DVBC_CINERGY1200:
777 fe = tda10021_attach(&philips_cu1216_config,
778 &budget_av->budget.i2c_adap,
779 read_pwm(budget_av));
780 break;
781
782 case SUBID_DVBT_CINERGY1200:
783 fe = tda10046_attach(&philips_tu1216_config,
784 &budget_av->budget.i2c_adap);
785 break;
786 }
787
788 if (fe == NULL) {
789 printk(KERN_ERR "budget-av: A frontend driver was not found "
790 "for device %04x/%04x subsystem %04x/%04x\n",
791 saa->pci->vendor,
792 saa->pci->device,
793 saa->pci->subsystem_vendor,
794 saa->pci->subsystem_device);
795 return;
796 }
797
798 budget_av->budget.dvb_frontend = fe;
799
800 if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
801 budget_av->budget.dvb_frontend)) {
802 printk(KERN_ERR "budget-av: Frontend registration failed!\n");
803 if (budget_av->budget.dvb_frontend->ops->release)
804 budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
805 budget_av->budget.dvb_frontend = NULL;
806 }
807 }
808
809
810 static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
811 {
812 struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
813
814 dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
815
816 if (*isr & MASK_10)
817 ttpci_budget_irq10_handler(dev, isr);
818 }
819
820 static int budget_av_detach(struct saa7146_dev *dev)
821 {
822 struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
823 int err;
824
825 dprintk(2, "dev: %p\n", dev);
826
827 if (1 == budget_av->has_saa7113) {
828 saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
829
830 msleep(200);
831
832 saa7146_unregister_device(&budget_av->vd, dev);
833 }
834
835 if (budget_av->budget.ci_present)
836 ciintf_deinit(budget_av);
837
838 if (budget_av->budget.dvb_frontend != NULL)
839 dvb_unregister_frontend(budget_av->budget.dvb_frontend);
840 err = ttpci_budget_deinit(&budget_av->budget);
841
842 kfree(budget_av);
843
844 return err;
845 }
846
847 static struct saa7146_ext_vv vv_data;
848
849 static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
850 {
851 struct budget_av *budget_av;
852 u8 *mac;
853 int err;
854
855 dprintk(2, "dev: %p\n", dev);
856
857 if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
858 return -ENOMEM;
859
860 memset(budget_av, 0, sizeof(struct budget_av));
861
862 budget_av->has_saa7113 = 0;
863 budget_av->budget.ci_present = 0;
864
865 dev->ext_priv = budget_av;
866
867 if ((err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE))) {
868 kfree(budget_av);
869 return err;
870 }
871
872 /* knc1 initialization */
873 saa7146_write(dev, DD1_STREAM_B, 0x04000000);
874 saa7146_write(dev, DD1_INIT, 0x07000600);
875 saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
876
877 if (saa7113_init(budget_av) == 0) {
878 budget_av->has_saa7113 = 1;
879
880 if (0 != saa7146_vv_init(dev, &vv_data)) {
881 /* fixme: proper cleanup here */
882 ERR(("cannot init vv subsystem.\n"));
883 return err;
884 }
885
886 if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
887 /* fixme: proper cleanup here */
888 ERR(("cannot register capture v4l2 device.\n"));
889 return err;
890 }
891
892 /* beware: this modifies dev->vv ... */
893 saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
894 SAA7146_HPS_SYNC_PORT_A);
895
896 saa7113_setinput(budget_av, 0);
897 } else {
898 ciintf_init(budget_av);
899 }
900
901 /* fixme: find some sane values here... */
902 saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
903
904 mac = budget_av->budget.dvb_adapter.proposed_mac;
905 if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
906 printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
907 budget_av->budget.dvb_adapter.num);
908 memset(mac, 0, 6);
909 } else {
910 printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
911 budget_av->budget.dvb_adapter.num,
912 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
913 }
914
915 budget_av->budget.dvb_adapter.priv = budget_av;
916 frontend_init(budget_av);
917
918 return 0;
919 }
920
921 #define KNC1_INPUTS 2
922 static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
923 {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
924 {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
925 };
926
927 static struct saa7146_extension_ioctls ioctls[] = {
928 {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
929 {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
930 {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
931 {0, 0}
932 };
933
934 static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
935 {
936 struct saa7146_dev *dev = fh->dev;
937 struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
938
939 switch (cmd) {
940 case VIDIOC_ENUMINPUT:{
941 struct v4l2_input *i = arg;
942
943 dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
944 if (i->index < 0 || i->index >= KNC1_INPUTS) {
945 return -EINVAL;
946 }
947 memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
948 return 0;
949 }
950 case VIDIOC_G_INPUT:{
951 int *input = (int *) arg;
952
953 *input = budget_av->cur_input;
954
955 dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
956 return 0;
957 }
958 case VIDIOC_S_INPUT:{
959 int input = *(int *) arg;
960 dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
961 return saa7113_setinput(budget_av, input);
962 }
963 default:
964 return -ENOIOCTLCMD;
965 }
966 return 0;
967 }
968
969 static struct saa7146_standard standard[] = {
970 {.name = "PAL",.id = V4L2_STD_PAL,
971 .v_offset = 0x17,.v_field = 288,
972 .h_offset = 0x14,.h_pixels = 680,
973 .v_max_out = 576,.h_max_out = 768 },
974
975 {.name = "NTSC",.id = V4L2_STD_NTSC,
976 .v_offset = 0x16,.v_field = 240,
977 .h_offset = 0x06,.h_pixels = 708,
978 .v_max_out = 480,.h_max_out = 640, },
979 };
980
981 static struct saa7146_ext_vv vv_data = {
982 .inputs = 2,
983 .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
984 .flags = 0,
985 .stds = &standard[0],
986 .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
987 .ioctls = &ioctls[0],
988 .ioctl = av_ioctl,
989 };
990
991 static struct saa7146_extension budget_extension;
992
993 MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
994 MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
995 MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
996 MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
997 MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
998 MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
999 MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
1000 MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
1001 MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
1002
1003 static struct pci_device_id pci_tbl[] = {
1004 MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
1005 MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
1006 MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
1007 MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
1008 MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
1009 MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
1010 MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
1011 MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
1012 MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
1013 MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
1014 {
1015 .vendor = 0,
1016 }
1017 };
1018
1019 MODULE_DEVICE_TABLE(pci, pci_tbl);
1020
1021 static struct saa7146_extension budget_extension = {
1022 .name = "budget_av",
1023 .pci_tbl = pci_tbl,
1024
1025 .module = THIS_MODULE,
1026 .attach = budget_av_attach,
1027 .detach = budget_av_detach,
1028
1029 .irq_mask = MASK_10,
1030 .irq_func = budget_av_irq,
1031 };
1032
1033 static int __init budget_av_init(void)
1034 {
1035 return saa7146_register_extension(&budget_extension);
1036 }
1037
1038 static void __exit budget_av_exit(void)
1039 {
1040 saa7146_unregister_extension(&budget_extension);
1041 }
1042
1043 module_init(budget_av_init);
1044 module_exit(budget_av_exit);
1045
1046 MODULE_LICENSE("GPL");
1047 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
1048 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
1049 "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
Linux kernel - Deliverables
This page took 0.054694 seconds and 5 git commands to generate.