projects / deliverable / linux.git / blob
? search:


c4c59175e52c6c526042ed5fdf332641740f2b82
[deliverable/linux.git] / drivers / media / pci / bt8xx / bttv-cards.c
1 /*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
30 #include <linux/delay.h>
31 #include <linux/module.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
37 #include <net/checksum.h>
38
39 #include <asm/unaligned.h>
40 #include <asm/io.h>
41
42 #include "bttvp.h"
43 #include <media/v4l2-common.h>
44 #include <media/tvaudio.h>
45 #include "bttv-audio-hook.h"
46
47 /* fwd decl */
48 static void boot_msp34xx(struct bttv *btv, int pin);
49 static void hauppauge_eeprom(struct bttv *btv);
50 static void avermedia_eeprom(struct bttv *btv);
51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
52 static void modtec_eeprom(struct bttv *btv);
53 static void init_PXC200(struct bttv *btv);
54 static void init_RTV24(struct bttv *btv);
55
56 static void rv605_muxsel(struct bttv *btv, unsigned int input);
57 static void eagle_muxsel(struct bttv *btv, unsigned int input);
58 static void xguard_muxsel(struct bttv *btv, unsigned int input);
59 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
60 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
61
62 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
63
64 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
65 static void picolo_tetra_init(struct bttv *btv);
66
67 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
68 static void tibetCS16_init(struct bttv *btv);
69
70 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
71 static void kodicom4400r_init(struct bttv *btv);
72
73 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
74 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
75
76 static void geovision_muxsel(struct bttv *btv, unsigned int input);
77
78 static void phytec_muxsel(struct bttv *btv, unsigned int input);
79
80 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
81 static void gv800s_init(struct bttv *btv);
82
83 static void td3116_muxsel(struct bttv *btv, unsigned int input);
84
85 static int terratec_active_radio_upgrade(struct bttv *btv);
86 static int tea5757_read(struct bttv *btv);
87 static int tea5757_write(struct bttv *btv, int value);
88 static void identify_by_eeprom(struct bttv *btv,
89 unsigned char eeprom_data[256]);
90 static int pvr_boot(struct bttv *btv);
91
92 /* config variables */
93 static unsigned int triton1;
94 static unsigned int vsfx;
95 static unsigned int latency = UNSET;
96 int no_overlay=-1;
97
98 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
100 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int audiodev[BTTV_MAX];
104 static unsigned int saa6588[BTTV_MAX];
105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
106 static unsigned int autoload = UNSET;
107 static unsigned int gpiomask = UNSET;
108 static unsigned int audioall = UNSET;
109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
110
111 /* insmod options */
112 module_param(triton1, int, 0444);
113 module_param(vsfx, int, 0444);
114 module_param(no_overlay, int, 0444);
115 module_param(latency, int, 0444);
116 module_param(gpiomask, int, 0444);
117 module_param(audioall, int, 0444);
118 module_param(autoload, int, 0444);
119
120 module_param_array(card, int, NULL, 0444);
121 module_param_array(pll, int, NULL, 0444);
122 module_param_array(tuner, int, NULL, 0444);
123 module_param_array(svhs, int, NULL, 0444);
124 module_param_array(remote, int, NULL, 0444);
125 module_param_array(audiodev, int, NULL, 0444);
126 module_param_array(audiomux, int, NULL, 0444);
127
128 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
129 "[enable bug compatibility for triton1 + others]");
130 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
131 "[yet another chipset flaw workaround]");
132 MODULE_PARM_DESC(latency,"pci latency timer");
133 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
134 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
135 MODULE_PARM_DESC(tuner,"specify installed tuner type");
136 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
137 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
138 "\t\t-1 = no audio\n"
139 "\t\t 0 = autodetect (default)\n"
140 "\t\t 1 = msp3400\n"
141 "\t\t 2 = tda7432\n"
142 "\t\t 3 = tvaudio");
143 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
144 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
145 " [some VIA/SIS chipsets are known to have problem with overlay]");
146
147 /* ----------------------------------------------------------------------- */
148 /* list of card IDs for bt878+ cards */
149
150 static struct CARD {
151 unsigned id;
152 int cardnr;
153 char *name;
154 } cards[] = {
155 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
156 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
157 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
158 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
159 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
160 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
161 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
162 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
163 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
164
165 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
166 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
167
168 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
169 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
170 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
171 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
172 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
173 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
174 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
175 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
176 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
177
178 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
179 /* some cards ship with byteswapped IDs ... */
180 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
181 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
182 /* this seems to happen as well ... */
183 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
184
185 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
186 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
187 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
188
189 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
190 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
191 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
192 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
193 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
194 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
195 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
196
197 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
198 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
199 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
200 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
201 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
202
203 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
204 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
205 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
206 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
207
208 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
209 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
210 /* clashes with FlyVideo
211 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
212 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
213 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
214 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
215 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
216
217 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
218 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
219 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
220 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
221 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
222
223 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
224 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
225 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
226 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
227 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
228
229 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
230 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
231 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
232 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
233
234 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
235 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
236 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
237 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
238
239 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
240 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
241 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
242 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
243 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
244 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
245 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
246 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
247 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
248 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
249 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
250 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
251 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
252 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
262 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
263 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
264 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
265 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
266 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
267 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
268 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
269 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
270 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
271 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
272
273 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
274 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
275
276 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
277 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
278 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
279 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
280 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
281 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
282
283 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
284 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
285
286 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
287 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
288 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
289 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
290 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
291 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
292 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
293 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
294 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
295 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
296
297 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
298 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
299
300 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
301 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
302 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
303 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
304
305 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
306
307 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
308 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
309
310 /* likely broken, vendor id doesn't match the other magic views ...
311 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
312
313 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
314 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
315
316 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
317
318 /* DVB cards (using pci function .1 for mpeg data xfer) */
319 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
320 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
321 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
322 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
323 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
324 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
325 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
326 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
327 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
328 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
329 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
330 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
331 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
332 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
333 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
334 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
335 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
336 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
337 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
338
339 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
340 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
341 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
342 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
343 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
344 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
345 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
346 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
347 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" },
348 { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
349 { 0, -1, NULL }
350 };
351
352 /* ----------------------------------------------------------------------- */
353 /* array with description for bt848 / bt878 tv/grabber cards */
354
355 struct tvcard bttv_tvcards[] = {
356 /* ---- card 0x00 ---------------------------------- */
357 [BTTV_BOARD_UNKNOWN] = {
358 .name = " *** UNKNOWN/GENERIC *** ",
359 .video_inputs = 4,
360 .svhs = 2,
361 .muxsel = MUXSEL(2, 3, 1, 0),
362 .tuner_type = UNSET,
363 .tuner_addr = ADDR_UNSET,
364 },
365 [BTTV_BOARD_MIRO] = {
366 .name = "MIRO PCTV",
367 .video_inputs = 4,
368 /* .audio_inputs= 1, */
369 .svhs = 2,
370 .gpiomask = 15,
371 .muxsel = MUXSEL(2, 3, 1, 1),
372 .gpiomux = { 2, 0, 0, 0 },
373 .gpiomute = 10,
374 .tuner_type = UNSET,
375 .tuner_addr = ADDR_UNSET,
376 },
377 [BTTV_BOARD_HAUPPAUGE] = {
378 .name = "Hauppauge (bt848)",
379 .video_inputs = 4,
380 /* .audio_inputs= 1, */
381 .svhs = 2,
382 .gpiomask = 7,
383 .muxsel = MUXSEL(2, 3, 1, 1),
384 .gpiomux = { 0, 1, 2, 3 },
385 .gpiomute = 4,
386 .tuner_type = UNSET,
387 .tuner_addr = ADDR_UNSET,
388 },
389 [BTTV_BOARD_STB] = {
390 .name = "STB, Gateway P/N 6000699 (bt848)",
391 .video_inputs = 3,
392 /* .audio_inputs= 1, */
393 .svhs = 2,
394 .gpiomask = 7,
395 .muxsel = MUXSEL(2, 3, 1, 1),
396 .gpiomux = { 4, 0, 2, 3 },
397 .gpiomute = 1,
398 .no_msp34xx = 1,
399 .tuner_type = TUNER_PHILIPS_NTSC,
400 .tuner_addr = ADDR_UNSET,
401 .pll = PLL_28,
402 .has_radio = 1,
403 },
404
405 /* ---- card 0x04 ---------------------------------- */
406 [BTTV_BOARD_INTEL] = {
407 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
408 .video_inputs = 4,
409 /* .audio_inputs= 0, */
410 .svhs = 2,
411 .gpiomask = 0,
412 .muxsel = MUXSEL(2, 3, 1, 1),
413 .gpiomux = { 0 },
414 .tuner_type = TUNER_ABSENT,
415 .tuner_addr = ADDR_UNSET,
416 },
417 [BTTV_BOARD_DIAMOND] = {
418 .name = "Diamond DTV2000",
419 .video_inputs = 4,
420 /* .audio_inputs= 1, */
421 .svhs = 2,
422 .gpiomask = 3,
423 .muxsel = MUXSEL(2, 3, 1, 0),
424 .gpiomux = { 0, 1, 0, 1 },
425 .gpiomute = 3,
426 .tuner_type = UNSET,
427 .tuner_addr = ADDR_UNSET,
428 },
429 [BTTV_BOARD_AVERMEDIA] = {
430 .name = "AVerMedia TVPhone",
431 .video_inputs = 3,
432 /* .audio_inputs= 1, */
433 .svhs = 3,
434 .muxsel = MUXSEL(2, 3, 1, 1),
435 .gpiomask = 0x0f,
436 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
437 /* 0x04 for some cards ?? */
438 .tuner_type = UNSET,
439 .tuner_addr = ADDR_UNSET,
440 .audio_mode_gpio= avermedia_tvphone_audio,
441 .has_remote = 1,
442 },
443 [BTTV_BOARD_MATRIX_VISION] = {
444 .name = "MATRIX-Vision MV-Delta",
445 .video_inputs = 5,
446 /* .audio_inputs= 1, */
447 .svhs = 3,
448 .gpiomask = 0,
449 .muxsel = MUXSEL(2, 3, 1, 0, 0),
450 .gpiomux = { 0 },
451 .tuner_type = TUNER_ABSENT,
452 .tuner_addr = ADDR_UNSET,
453 },
454
455 /* ---- card 0x08 ---------------------------------- */
456 [BTTV_BOARD_FLYVIDEO] = {
457 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
458 .video_inputs = 4,
459 /* .audio_inputs= 1, */
460 .svhs = 2,
461 .gpiomask = 0xc00,
462 .muxsel = MUXSEL(2, 3, 1, 1),
463 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
464 .gpiomute = 0xc00,
465 .pll = PLL_28,
466 .tuner_type = UNSET,
467 .tuner_addr = ADDR_UNSET,
468 },
469 [BTTV_BOARD_TURBOTV] = {
470 .name = "IMS/IXmicro TurboTV",
471 .video_inputs = 3,
472 /* .audio_inputs= 1, */
473 .svhs = 2,
474 .gpiomask = 3,
475 .muxsel = MUXSEL(2, 3, 1, 1),
476 .gpiomux = { 1, 1, 2, 3 },
477 .pll = PLL_28,
478 .tuner_type = TUNER_TEMIC_PAL,
479 .tuner_addr = ADDR_UNSET,
480 },
481 [BTTV_BOARD_HAUPPAUGE878] = {
482 .name = "Hauppauge (bt878)",
483 .video_inputs = 4,
484 /* .audio_inputs= 1, */
485 .svhs = 2,
486 .gpiomask = 0x0f, /* old: 7 */
487 .muxsel = MUXSEL(2, 0, 1, 1),
488 .gpiomux = { 0, 1, 2, 3 },
489 .gpiomute = 4,
490 .pll = PLL_28,
491 .tuner_type = UNSET,
492 .tuner_addr = ADDR_UNSET,
493 },
494 [BTTV_BOARD_MIROPRO] = {
495 .name = "MIRO PCTV pro",
496 .video_inputs = 3,
497 /* .audio_inputs= 1, */
498 .svhs = 2,
499 .gpiomask = 0x3014f,
500 .muxsel = MUXSEL(2, 3, 1, 1),
501 .gpiomux = { 0x20001,0x10001, 0, 0 },
502 .gpiomute = 10,
503 .tuner_type = UNSET,
504 .tuner_addr = ADDR_UNSET,
505 },
506
507 /* ---- card 0x0c ---------------------------------- */
508 [BTTV_BOARD_ADSTECH_TV] = {
509 .name = "ADS Technologies Channel Surfer TV (bt848)",
510 .video_inputs = 3,
511 /* .audio_inputs= 1, */
512 .svhs = 2,
513 .gpiomask = 15,
514 .muxsel = MUXSEL(2, 3, 1, 1),
515 .gpiomux = { 13, 14, 11, 7 },
516 .tuner_type = UNSET,
517 .tuner_addr = ADDR_UNSET,
518 },
519 [BTTV_BOARD_AVERMEDIA98] = {
520 .name = "AVerMedia TVCapture 98",
521 .video_inputs = 3,
522 /* .audio_inputs= 4, */
523 .svhs = 2,
524 .gpiomask = 15,
525 .muxsel = MUXSEL(2, 3, 1, 1),
526 .gpiomux = { 13, 14, 11, 7 },
527 .msp34xx_alt = 1,
528 .pll = PLL_28,
529 .tuner_type = TUNER_PHILIPS_PAL,
530 .tuner_addr = ADDR_UNSET,
531 .audio_mode_gpio= avermedia_tv_stereo_audio,
532 .no_gpioirq = 1,
533 },
534 [BTTV_BOARD_VHX] = {
535 .name = "Aimslab Video Highway Xtreme (VHX)",
536 .video_inputs = 3,
537 /* .audio_inputs= 1, */
538 .svhs = 2,
539 .gpiomask = 7,
540 .muxsel = MUXSEL(2, 3, 1, 1),
541 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
542 .gpiomute = 4,
543 .pll = PLL_28,
544 .tuner_type = UNSET,
545 .tuner_addr = ADDR_UNSET,
546 },
547 [BTTV_BOARD_ZOLTRIX] = {
548 .name = "Zoltrix TV-Max",
549 .video_inputs = 3,
550 /* .audio_inputs= 1, */
551 .svhs = 2,
552 .gpiomask = 15,
553 .muxsel = MUXSEL(2, 3, 1, 1),
554 .gpiomux = { 0, 0, 1, 0 },
555 .gpiomute = 10,
556 .tuner_type = UNSET,
557 .tuner_addr = ADDR_UNSET,
558 },
559
560 /* ---- card 0x10 ---------------------------------- */
561 [BTTV_BOARD_PIXVIEWPLAYTV] = {
562 .name = "Prolink Pixelview PlayTV (bt878)",
563 .video_inputs = 3,
564 /* .audio_inputs= 1, */
565 .svhs = 2,
566 .gpiomask = 0x01fe00,
567 .muxsel = MUXSEL(2, 3, 1, 1),
568 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
569 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
570 .gpiomute = 0x002000,
571 .pll = PLL_28,
572 .tuner_type = UNSET,
573 .tuner_addr = ADDR_UNSET,
574 },
575 [BTTV_BOARD_WINVIEW_601] = {
576 .name = "Leadtek WinView 601",
577 .video_inputs = 3,
578 /* .audio_inputs= 1, */
579 .svhs = 2,
580 .gpiomask = 0x8300f8,
581 .muxsel = MUXSEL(2, 3, 1, 1, 0),
582 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
583 .gpiomute = 0xcfa007,
584 .tuner_type = UNSET,
585 .tuner_addr = ADDR_UNSET,
586 .volume_gpio = winview_volume,
587 .has_radio = 1,
588 },
589 [BTTV_BOARD_AVEC_INTERCAP] = {
590 .name = "AVEC Intercapture",
591 .video_inputs = 3,
592 /* .audio_inputs= 2, */
593 .svhs = 2,
594 .gpiomask = 0,
595 .muxsel = MUXSEL(2, 3, 1, 1),
596 .gpiomux = { 1, 0, 0, 0 },
597 .tuner_type = UNSET,
598 .tuner_addr = ADDR_UNSET,
599 },
600 [BTTV_BOARD_LIFE_FLYKIT] = {
601 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
602 .video_inputs = 4,
603 /* .audio_inputs= 1, */
604 .svhs = NO_SVHS,
605 .gpiomask = 0x8dff00,
606 .muxsel = MUXSEL(2, 3, 1, 1),
607 .gpiomux = { 0 },
608 .no_msp34xx = 1,
609 .tuner_type = TUNER_ABSENT,
610 .tuner_addr = ADDR_UNSET,
611 },
612
613 /* ---- card 0x14 ---------------------------------- */
614 [BTTV_BOARD_CEI_RAFFLES] = {
615 .name = "CEI Raffles Card",
616 .video_inputs = 3,
617 /* .audio_inputs= 3, */
618 .svhs = 2,
619 .muxsel = MUXSEL(2, 3, 1, 1),
620 .tuner_type = UNSET,
621 .tuner_addr = ADDR_UNSET,
622 },
623 [BTTV_BOARD_CONFERENCETV] = {
624 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
625 .video_inputs = 4,
626 /* .audio_inputs= 2, tuner, line in */
627 .svhs = 2,
628 .gpiomask = 0x1800,
629 .muxsel = MUXSEL(2, 3, 1, 1),
630 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
631 .gpiomute = 0x1800,
632 .pll = PLL_28,
633 .tuner_type = TUNER_PHILIPS_PAL_I,
634 .tuner_addr = ADDR_UNSET,
635 },
636 [BTTV_BOARD_PHOEBE_TVMAS] = {
637 .name = "Askey CPH050/ Phoebe Tv Master + FM",
638 .video_inputs = 3,
639 /* .audio_inputs= 1, */
640 .svhs = 2,
641 .gpiomask = 0xc00,
642 .muxsel = MUXSEL(2, 3, 1, 1),
643 .gpiomux = { 0, 1, 0x800, 0x400 },
644 .gpiomute = 0xc00,
645 .pll = PLL_28,
646 .tuner_type = UNSET,
647 .tuner_addr = ADDR_UNSET,
648 },
649 [BTTV_BOARD_MODTEC_205] = {
650 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
651 .video_inputs = 3,
652 /* .audio_inputs= 1, */
653 .svhs = NO_SVHS,
654 .has_dig_in = 1,
655 .gpiomask = 7,
656 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
657 /* .digital_mode= DIGITAL_MODE_CAMERA, */
658 .gpiomux = { 0, 0, 0, 0 },
659 .no_msp34xx = 1,
660 .pll = PLL_28,
661 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
662 .tuner_addr = ADDR_UNSET,
663 },
664
665 /* ---- card 0x18 ---------------------------------- */
666 [BTTV_BOARD_MAGICTVIEW061] = {
667 .name = "Askey CPH05X/06X (bt878) [many vendors]",
668 .video_inputs = 3,
669 /* .audio_inputs= 1, */
670 .svhs = 2,
671 .gpiomask = 0xe00,
672 .muxsel = MUXSEL(2, 3, 1, 1),
673 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
674 .gpiomute = 0xc00,
675 .pll = PLL_28,
676 .tuner_type = UNSET,
677 .tuner_addr = ADDR_UNSET,
678 .has_remote = 1,
679 .has_radio = 1, /* not every card has radio */
680 },
681 [BTTV_BOARD_VOBIS_BOOSTAR] = {
682 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
683 .video_inputs = 3,
684 /* .audio_inputs= 1, */
685 .svhs = 2,
686 .gpiomask = 0x1f0fff,
687 .muxsel = MUXSEL(2, 3, 1, 1),
688 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
689 .gpiomute = 0x40000,
690 .tuner_type = TUNER_PHILIPS_PAL,
691 .tuner_addr = ADDR_UNSET,
692 .audio_mode_gpio= terratv_audio,
693 },
694 [BTTV_BOARD_HAUPPAUG_WCAM] = {
695 .name = "Hauppauge WinCam newer (bt878)",
696 .video_inputs = 4,
697 /* .audio_inputs= 1, */
698 .svhs = 3,
699 .gpiomask = 7,
700 .muxsel = MUXSEL(2, 0, 1, 1),
701 .gpiomux = { 0, 1, 2, 3 },
702 .gpiomute = 4,
703 .tuner_type = UNSET,
704 .tuner_addr = ADDR_UNSET,
705 },
706 [BTTV_BOARD_MAXI] = {
707 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
708 .video_inputs = 4,
709 /* .audio_inputs= 2, */
710 .svhs = 2,
711 .gpiomask = 0x1800,
712 .muxsel = MUXSEL(2, 3, 1, 1),
713 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
714 .gpiomute = 0x1800,
715 .pll = PLL_28,
716 .tuner_type = TUNER_PHILIPS_SECAM,
717 .tuner_addr = ADDR_UNSET,
718 },
719
720 /* ---- card 0x1c ---------------------------------- */
721 [BTTV_BOARD_TERRATV] = {
722 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
723 .video_inputs = 3,
724 /* .audio_inputs= 1, */
725 .svhs = 2,
726 .gpiomask = 0x1f0fff,
727 .muxsel = MUXSEL(2, 3, 1, 1),
728 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
729 .gpiomute = 0x40000,
730 .tuner_type = TUNER_PHILIPS_PAL,
731 .tuner_addr = ADDR_UNSET,
732 .audio_mode_gpio= terratv_audio,
733 /* GPIO wiring:
734 External 20 pin connector (for Active Radio Upgrade board)
735 gpio00: i2c-sda
736 gpio01: i2c-scl
737 gpio02: om5610-data
738 gpio03: om5610-clk
739 gpio04: om5610-wre
740 gpio05: om5610-stereo
741 gpio06: rds6588-davn
742 gpio07: Pin 7 n.c.
743 gpio08: nIOW
744 gpio09+10: nIOR, nSEL ?? (bt878)
745 gpio09: nIOR (bt848)
746 gpio10: nSEL (bt848)
747 Sound Routing:
748 gpio16: u2-A0 (1st 4052bt)
749 gpio17: u2-A1
750 gpio18: u2-nEN
751 gpio19: u4-A0 (2nd 4052)
752 gpio20: u4-A1
753 u4-nEN - GND
754 Btspy:
755 00000 : Cdrom (internal audio input)
756 10000 : ext. Video audio input
757 20000 : TV Mono
758 a0000 : TV Mono/2
759 1a0000 : TV Stereo
760 30000 : Radio
761 40000 : Mute
762 */
763
764 },
765 [BTTV_BOARD_PXC200] = {
766 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
767 .name = "Imagenation PXC200",
768 .video_inputs = 5,
769 /* .audio_inputs= 1, */
770 .svhs = 1, /* was: 4 */
771 .gpiomask = 0,
772 .muxsel = MUXSEL(2, 3, 1, 0, 0),
773 .gpiomux = { 0 },
774 .tuner_type = TUNER_ABSENT,
775 .tuner_addr = ADDR_UNSET,
776 .muxsel_hook = PXC200_muxsel,
777
778 },
779 [BTTV_BOARD_FLYVIDEO_98] = {
780 .name = "Lifeview FlyVideo 98 LR50",
781 .video_inputs = 4,
782 /* .audio_inputs= 1, */
783 .svhs = 2,
784 .gpiomask = 0x1800, /* 0x8dfe00 */
785 .muxsel = MUXSEL(2, 3, 1, 1),
786 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
787 .gpiomute = 0x1800,
788 .pll = PLL_28,
789 .tuner_type = UNSET,
790 .tuner_addr = ADDR_UNSET,
791 },
792 [BTTV_BOARD_IPROTV] = {
793 .name = "Formac iProTV, Formac ProTV I (bt848)",
794 .video_inputs = 4,
795 /* .audio_inputs= 1, */
796 .svhs = 3,
797 .gpiomask = 1,
798 .muxsel = MUXSEL(2, 3, 1, 1),
799 .gpiomux = { 1, 0, 0, 0 },
800 .pll = PLL_28,
801 .tuner_type = TUNER_PHILIPS_PAL,
802 .tuner_addr = ADDR_UNSET,
803 },
804
805 /* ---- card 0x20 ---------------------------------- */
806 [BTTV_BOARD_INTEL_C_S_PCI] = {
807 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
808 .video_inputs = 4,
809 /* .audio_inputs= 0, */
810 .svhs = 2,
811 .gpiomask = 0,
812 .muxsel = MUXSEL(2, 3, 1, 1),
813 .gpiomux = { 0 },
814 .tuner_type = TUNER_ABSENT,
815 .tuner_addr = ADDR_UNSET,
816 },
817 [BTTV_BOARD_TERRATVALUE] = {
818 .name = "Terratec TerraTValue Version Bt878",
819 .video_inputs = 3,
820 /* .audio_inputs= 1, */
821 .svhs = 2,
822 .gpiomask = 0xffff00,
823 .muxsel = MUXSEL(2, 3, 1, 1),
824 .gpiomux = { 0x500, 0, 0x300, 0x900 },
825 .gpiomute = 0x900,
826 .pll = PLL_28,
827 .tuner_type = TUNER_PHILIPS_PAL,
828 .tuner_addr = ADDR_UNSET,
829 },
830 [BTTV_BOARD_WINFAST2000] = {
831 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
832 .video_inputs = 4,
833 /* .audio_inputs= 1, */
834 .svhs = 2,
835 /* TV, CVid, SVid, CVid over SVid connector */
836 .muxsel = MUXSEL(2, 3, 1, 1, 0),
837 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
838 .gpiomask = 0xb33000,
839 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
840 .gpiomute = 0x800000,
841 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
842 gpio23 -- hef4052:nEnable (0x800000)
843 gpio12 -- hef4052:A1
844 gpio13 -- hef4052:A0
845 0x0000: external audio
846 0x1000: FM
847 0x2000: TV
848 0x3000: n.c.
849 Note: There exists another variant "Winfast 2000" with tv stereo !?
850 Note: eeprom only contains FF and pci subsystem id 107d:6606
851 */
852 .pll = PLL_28,
853 .has_radio = 1,
854 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
855 .tuner_addr = ADDR_UNSET,
856 .audio_mode_gpio= winfast2000_audio,
857 .has_remote = 1,
858 },
859 [BTTV_BOARD_CHRONOS_VS2] = {
860 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
861 .video_inputs = 4,
862 /* .audio_inputs= 3, */
863 .svhs = 2,
864 .gpiomask = 0x1800,
865 .muxsel = MUXSEL(2, 3, 1, 1),
866 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
867 .gpiomute = 0x1800,
868 .pll = PLL_28,
869 .tuner_type = UNSET,
870 .tuner_addr = ADDR_UNSET,
871 },
872
873 /* ---- card 0x24 ---------------------------------- */
874 [BTTV_BOARD_TYPHOON_TVIEW] = {
875 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
876 .video_inputs = 4,
877 /* .audio_inputs= 3, */
878 .svhs = 2,
879 .gpiomask = 0x1800,
880 .muxsel = MUXSEL(2, 3, 1, 1),
881 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
882 .gpiomute = 0x1800,
883 .pll = PLL_28,
884 .tuner_type = UNSET,
885 .tuner_addr = ADDR_UNSET,
886 .has_radio = 1,
887 },
888 [BTTV_BOARD_PXELVWPLTVPRO] = {
889 .name = "Prolink PixelView PlayTV pro",
890 .video_inputs = 3,
891 /* .audio_inputs= 1, */
892 .svhs = 2,
893 .gpiomask = 0xff,
894 .muxsel = MUXSEL(2, 3, 1, 1),
895 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
896 .gpiomute = 0x29,
897 .no_msp34xx = 1,
898 .pll = PLL_28,
899 .tuner_type = UNSET,
900 .tuner_addr = ADDR_UNSET,
901 },
902 [BTTV_BOARD_MAGICTVIEW063] = {
903 .name = "Askey CPH06X TView99",
904 .video_inputs = 4,
905 /* .audio_inputs= 1, */
906 .svhs = 2,
907 .gpiomask = 0x551e00,
908 .muxsel = MUXSEL(2, 3, 1, 0),
909 .gpiomux = { 0x551400, 0x551200, 0, 0 },
910 .gpiomute = 0x551c00,
911 .pll = PLL_28,
912 .tuner_type = TUNER_PHILIPS_PAL_I,
913 .tuner_addr = ADDR_UNSET,
914 .has_remote = 1,
915 },
916 [BTTV_BOARD_PINNACLE] = {
917 .name = "Pinnacle PCTV Studio/Rave",
918 .video_inputs = 3,
919 /* .audio_inputs= 1, */
920 .svhs = 2,
921 .gpiomask = 0x03000F,
922 .muxsel = MUXSEL(2, 3, 1, 1),
923 .gpiomux = { 2, 0xd0001, 0, 0 },
924 .gpiomute = 1,
925 .pll = PLL_28,
926 .tuner_type = UNSET,
927 .tuner_addr = ADDR_UNSET,
928 },
929
930 /* ---- card 0x28 ---------------------------------- */
931 [BTTV_BOARD_STB2] = {
932 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
933 .video_inputs = 3,
934 /* .audio_inputs= 1, */
935 .svhs = 2,
936 .gpiomask = 7,
937 .muxsel = MUXSEL(2, 3, 1, 1),
938 .gpiomux = { 4, 0, 2, 3 },
939 .gpiomute = 1,
940 .no_msp34xx = 1,
941 .tuner_type = TUNER_PHILIPS_NTSC,
942 .tuner_addr = ADDR_UNSET,
943 .pll = PLL_28,
944 .has_radio = 1,
945 },
946 [BTTV_BOARD_AVPHONE98] = {
947 .name = "AVerMedia TVPhone 98",
948 .video_inputs = 3,
949 /* .audio_inputs= 4, */
950 .svhs = 2,
951 .gpiomask = 15,
952 .muxsel = MUXSEL(2, 3, 1, 1),
953 .gpiomux = { 13, 4, 11, 7 },
954 .pll = PLL_28,
955 .tuner_type = UNSET,
956 .tuner_addr = ADDR_UNSET,
957 .has_radio = 1,
958 .audio_mode_gpio= avermedia_tvphone_audio,
959 },
960 [BTTV_BOARD_PV951] = {
961 .name = "ProVideo PV951", /* pic16c54 */
962 .video_inputs = 3,
963 /* .audio_inputs= 1, */
964 .svhs = 2,
965 .gpiomask = 0,
966 .muxsel = MUXSEL(2, 3, 1, 1),
967 .gpiomux = { 0, 0, 0, 0},
968 .no_msp34xx = 1,
969 .pll = PLL_28,
970 .tuner_type = TUNER_PHILIPS_PAL_I,
971 .tuner_addr = ADDR_UNSET,
972 },
973 [BTTV_BOARD_ONAIR_TV] = {
974 .name = "Little OnAir TV",
975 .video_inputs = 3,
976 /* .audio_inputs= 1, */
977 .svhs = 2,
978 .gpiomask = 0xe00b,
979 .muxsel = MUXSEL(2, 3, 1, 1),
980 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
981 .gpiomute = 0xff3ffc,
982 .no_msp34xx = 1,
983 .tuner_type = UNSET,
984 .tuner_addr = ADDR_UNSET,
985 },
986
987 /* ---- card 0x2c ---------------------------------- */
988 [BTTV_BOARD_SIGMA_TVII_FM] = {
989 .name = "Sigma TVII-FM",
990 .video_inputs = 2,
991 /* .audio_inputs= 1, */
992 .svhs = NO_SVHS,
993 .gpiomask = 3,
994 .muxsel = MUXSEL(2, 3, 1, 1),
995 .gpiomux = { 1, 1, 0, 2 },
996 .gpiomute = 3,
997 .no_msp34xx = 1,
998 .pll = PLL_NONE,
999 .tuner_type = UNSET,
1000 .tuner_addr = ADDR_UNSET,
1001 },
1002 [BTTV_BOARD_MATRIX_VISION2] = {
1003 .name = "MATRIX-Vision MV-Delta 2",
1004 .video_inputs = 5,
1005 /* .audio_inputs= 1, */
1006 .svhs = 3,
1007 .gpiomask = 0,
1008 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1009 .gpiomux = { 0 },
1010 .no_msp34xx = 1,
1011 .pll = PLL_28,
1012 .tuner_type = TUNER_ABSENT,
1013 .tuner_addr = ADDR_UNSET,
1014 },
1015 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1016 .name = "Zoltrix Genie TV/FM",
1017 .video_inputs = 3,
1018 /* .audio_inputs= 1, */
1019 .svhs = 2,
1020 .gpiomask = 0xbcf03f,
1021 .muxsel = MUXSEL(2, 3, 1, 1),
1022 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1023 .gpiomute = 0xbcb03f,
1024 .no_msp34xx = 1,
1025 .pll = PLL_28,
1026 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1027 .tuner_addr = ADDR_UNSET,
1028 },
1029 [BTTV_BOARD_TERRATVRADIO] = {
1030 .name = "Terratec TV/Radio+",
1031 .video_inputs = 3,
1032 /* .audio_inputs= 1, */
1033 .svhs = 2,
1034 .gpiomask = 0x70000,
1035 .muxsel = MUXSEL(2, 3, 1, 1),
1036 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1037 .gpiomute = 0x40000,
1038 .no_msp34xx = 1,
1039 .pll = PLL_35,
1040 .tuner_type = TUNER_PHILIPS_PAL_I,
1041 .tuner_addr = ADDR_UNSET,
1042 .has_radio = 1,
1043 },
1044
1045 /* ---- card 0x30 ---------------------------------- */
1046 [BTTV_BOARD_DYNALINK] = {
1047 .name = "Askey CPH03x/ Dynalink Magic TView",
1048 .video_inputs = 3,
1049 /* .audio_inputs= 1, */
1050 .svhs = 2,
1051 .gpiomask = 15,
1052 .muxsel = MUXSEL(2, 3, 1, 1),
1053 .gpiomux = {2,0,0,0 },
1054 .gpiomute = 1,
1055 .pll = PLL_28,
1056 .tuner_type = UNSET,
1057 .tuner_addr = ADDR_UNSET,
1058 },
1059 [BTTV_BOARD_GVBCTV3PCI] = {
1060 .name = "IODATA GV-BCTV3/PCI",
1061 .video_inputs = 3,
1062 /* .audio_inputs= 1, */
1063 .svhs = 2,
1064 .gpiomask = 0x010f00,
1065 .muxsel = MUXSEL(2, 3, 0, 0),
1066 .gpiomux = {0x10000, 0, 0x10000, 0 },
1067 .no_msp34xx = 1,
1068 .pll = PLL_28,
1069 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1070 .tuner_addr = ADDR_UNSET,
1071 .audio_mode_gpio= gvbctv3pci_audio,
1072 },
1073 [BTTV_BOARD_PXELVWPLTVPAK] = {
1074 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1075 .video_inputs = 5,
1076 /* .audio_inputs= 1, */
1077 .svhs = 3,
1078 .has_dig_in = 1,
1079 .gpiomask = 0xAA0000,
1080 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1081 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1082 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1083 .gpiomute = 0xa8000,
1084 .no_msp34xx = 1,
1085 .pll = PLL_28,
1086 .tuner_type = TUNER_PHILIPS_PAL_I,
1087 .tuner_addr = ADDR_UNSET,
1088 .has_remote = 1,
1089 /* GPIO wiring: (different from Rev.4C !)
1090 GPIO17: U4.A0 (first hef4052bt)
1091 GPIO19: U4.A1
1092 GPIO20: U5.A1 (second hef4052bt)
1093 GPIO21: U4.nEN
1094 GPIO22: BT832 Reset Line
1095 GPIO23: A5,A0, U5,nEN
1096 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1097 */
1098 },
1099 [BTTV_BOARD_EAGLE] = {
1100 .name = "Eagle Wireless Capricorn2 (bt878A)",
1101 .video_inputs = 4,
1102 /* .audio_inputs= 1, */
1103 .svhs = 2,
1104 .gpiomask = 7,
1105 .muxsel = MUXSEL(2, 0, 1, 1),
1106 .gpiomux = { 0, 1, 2, 3 },
1107 .gpiomute = 4,
1108 .pll = PLL_28,
1109 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1110 .tuner_addr = ADDR_UNSET,
1111 },
1112
1113 /* ---- card 0x34 ---------------------------------- */
1114 [BTTV_BOARD_PINNACLEPRO] = {
1115 /* David Härdeman <david@2gen.com> */
1116 .name = "Pinnacle PCTV Studio Pro",
1117 .video_inputs = 4,
1118 /* .audio_inputs= 1, */
1119 .svhs = 3,
1120 .gpiomask = 0x03000F,
1121 .muxsel = MUXSEL(2, 3, 1, 1),
1122 .gpiomux = { 1, 0xd0001, 0, 0 },
1123 .gpiomute = 10,
1124 /* sound path (5 sources):
1125 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1126 0= ext. Audio IN
1127 1= from MUX2
1128 2= Mono TV sound from Tuner
1129 3= not connected
1130 MUX2 (mask 0x30000):
1131 0,2,3= from MSP34xx
1132 1= FM stereo Radio from Tuner */
1133 .pll = PLL_28,
1134 .tuner_type = UNSET,
1135 .tuner_addr = ADDR_UNSET,
1136 },
1137 [BTTV_BOARD_TVIEW_RDS_FM] = {
1138 /* Claas Langbehn <claas@bigfoot.com>,
1139 Sven Grothklags <sven@upb.de> */
1140 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1141 .video_inputs = 4,
1142 /* .audio_inputs= 3, */
1143 .svhs = 2,
1144 .gpiomask = 0x1c,
1145 .muxsel = MUXSEL(2, 3, 1, 1),
1146 .gpiomux = { 0, 0, 0x10, 8 },
1147 .gpiomute = 4,
1148 .pll = PLL_28,
1149 .tuner_type = TUNER_PHILIPS_PAL,
1150 .tuner_addr = ADDR_UNSET,
1151 .has_radio = 1,
1152 },
1153 [BTTV_BOARD_LIFETEC_9415] = {
1154 /* Tim Röstermundt <rosterm@uni-muenster.de>
1155 in de.comp.os.unix.linux.hardware:
1156 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1157 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1158 options tuner type=5 */
1159 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1160 .video_inputs = 4,
1161 /* .audio_inputs= 1, */
1162 .svhs = 2,
1163 .gpiomask = 0x18e0,
1164 .muxsel = MUXSEL(2, 3, 1, 1),
1165 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1166 .gpiomute = 0x18e0,
1167 /* For cards with tda9820/tda9821:
1168 0x0000: Tuner normal stereo
1169 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1170 0x0880: Tuner A2 stereo */
1171 .pll = PLL_28,
1172 .tuner_type = UNSET,
1173 .tuner_addr = ADDR_UNSET,
1174 },
1175 [BTTV_BOARD_BESTBUY_EASYTV] = {
1176 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1177 old Easy TV BT848 version (model CPH031) */
1178 .name = "Askey CPH031/ BESTBUY Easy TV",
1179 .video_inputs = 4,
1180 /* .audio_inputs= 1, */
1181 .svhs = 2,
1182 .gpiomask = 0xF,
1183 .muxsel = MUXSEL(2, 3, 1, 0),
1184 .gpiomux = { 2, 0, 0, 0 },
1185 .gpiomute = 10,
1186 .pll = PLL_28,
1187 .tuner_type = TUNER_TEMIC_PAL,
1188 .tuner_addr = ADDR_UNSET,
1189 },
1190
1191 /* ---- card 0x38 ---------------------------------- */
1192 [BTTV_BOARD_FLYVIDEO_98FM] = {
1193 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1194 .name = "Lifeview FlyVideo 98FM LR50",
1195 .video_inputs = 4,
1196 /* .audio_inputs= 3, */
1197 .svhs = 2,
1198 .gpiomask = 0x1800,
1199 .muxsel = MUXSEL(2, 3, 1, 1),
1200 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1201 .gpiomute = 0x1800,
1202 .pll = PLL_28,
1203 .tuner_type = TUNER_PHILIPS_PAL,
1204 .tuner_addr = ADDR_UNSET,
1205 },
1206 /* This is the ultimate cheapo capture card
1207 * just a BT848A on a small PCB!
1208 * Steve Hosgood <steve@equiinet.com> */
1209 [BTTV_BOARD_GRANDTEC] = {
1210 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1211 .video_inputs = 2,
1212 /* .audio_inputs= 0, */
1213 .svhs = 1,
1214 .gpiomask = 0,
1215 .muxsel = MUXSEL(3, 1),
1216 .gpiomux = { 0 },
1217 .no_msp34xx = 1,
1218 .pll = PLL_35,
1219 .tuner_type = TUNER_ABSENT,
1220 .tuner_addr = ADDR_UNSET,
1221 },
1222 [BTTV_BOARD_ASKEY_CPH060] = {
1223 /* Daniel Herrington <daniel.herrington@home.com> */
1224 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1225 .video_inputs = 3,
1226 /* .audio_inputs= 1, */
1227 .svhs = 2,
1228 .gpiomask = 0xe00,
1229 .muxsel = MUXSEL(2, 3, 1, 1),
1230 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1231 .gpiomute = 0x800,
1232 .pll = PLL_28,
1233 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1234 .tuner_addr = ADDR_UNSET,
1235 },
1236 [BTTV_BOARD_ASKEY_CPH03X] = {
1237 /* Matti Mottus <mottus@physic.ut.ee> */
1238 .name = "Askey CPH03x TV Capturer",
1239 .video_inputs = 4,
1240 /* .audio_inputs= 1, */
1241 .svhs = 2,
1242 .gpiomask = 0x03000F,
1243 .muxsel = MUXSEL(2, 3, 1, 0),
1244 .gpiomux = { 2, 0, 0, 0 },
1245 .gpiomute = 1,
1246 .pll = PLL_28,
1247 .tuner_type = TUNER_TEMIC_PAL,
1248 .tuner_addr = ADDR_UNSET,
1249 .has_remote = 1,
1250 },
1251
1252 /* ---- card 0x3c ---------------------------------- */
1253 [BTTV_BOARD_MM100PCTV] = {
1254 /* Philip Blundell <philb@gnu.org> */
1255 .name = "Modular Technology MM100PCTV",
1256 .video_inputs = 2,
1257 /* .audio_inputs= 2, */
1258 .svhs = NO_SVHS,
1259 .gpiomask = 11,
1260 .muxsel = MUXSEL(2, 3, 1, 1),
1261 .gpiomux = { 2, 0, 0, 1 },
1262 .gpiomute = 8,
1263 .pll = PLL_35,
1264 .tuner_type = TUNER_TEMIC_PAL,
1265 .tuner_addr = ADDR_UNSET,
1266 },
1267 [BTTV_BOARD_GMV1] = {
1268 /* Adrian Cox <adrian@humboldt.co.uk */
1269 .name = "AG Electronics GMV1",
1270 .video_inputs = 2,
1271 /* .audio_inputs= 0, */
1272 .svhs = 1,
1273 .gpiomask = 0xF,
1274 .muxsel = MUXSEL(2, 2),
1275 .gpiomux = { },
1276 .no_msp34xx = 1,
1277 .pll = PLL_28,
1278 .tuner_type = TUNER_ABSENT,
1279 .tuner_addr = ADDR_UNSET,
1280 },
1281 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1282 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1283 new Easy TV BT878 version (model CPH061)
1284 special thanks to Informatica Mieres for providing the card */
1285 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1286 .video_inputs = 3,
1287 /* .audio_inputs= 2, */
1288 .svhs = 2,
1289 .gpiomask = 0xFF,
1290 .muxsel = MUXSEL(2, 3, 1, 0),
1291 .gpiomux = { 1, 0, 4, 4 },
1292 .gpiomute = 9,
1293 .pll = PLL_28,
1294 .tuner_type = TUNER_PHILIPS_PAL,
1295 .tuner_addr = ADDR_UNSET,
1296 },
1297 [BTTV_BOARD_ATI_TVWONDER] = {
1298 /* Lukas Gebauer <geby@volny.cz> */
1299 .name = "ATI TV-Wonder",
1300 .video_inputs = 3,
1301 /* .audio_inputs= 1, */
1302 .svhs = 2,
1303 .gpiomask = 0xf03f,
1304 .muxsel = MUXSEL(2, 3, 1, 0),
1305 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1306 .gpiomute = 0xbffe,
1307 .pll = PLL_28,
1308 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1309 .tuner_addr = ADDR_UNSET,
1310 },
1311
1312 /* ---- card 0x40 ---------------------------------- */
1313 [BTTV_BOARD_ATI_TVWONDERVE] = {
1314 /* Lukas Gebauer <geby@volny.cz> */
1315 .name = "ATI TV-Wonder VE",
1316 .video_inputs = 2,
1317 /* .audio_inputs= 1, */
1318 .svhs = NO_SVHS,
1319 .gpiomask = 1,
1320 .muxsel = MUXSEL(2, 3, 0, 1),
1321 .gpiomux = { 0, 0, 1, 0 },
1322 .no_msp34xx = 1,
1323 .pll = PLL_28,
1324 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1325 .tuner_addr = ADDR_UNSET,
1326 },
1327 [BTTV_BOARD_FLYVIDEO2000] = {
1328 /* DeeJay <deejay@westel900.net (2000S) */
1329 .name = "Lifeview FlyVideo 2000S LR90",
1330 .video_inputs = 3,
1331 /* .audio_inputs= 3, */
1332 .svhs = 2,
1333 .gpiomask = 0x18e0,
1334 .muxsel = MUXSEL(2, 3, 0, 1),
1335 /* Radio changed from 1e80 to 0x800 to make
1336 FlyVideo2000S in .hu happy (gm)*/
1337 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1338 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1339 .gpiomute = 0x1800,
1340 .audio_mode_gpio= fv2000s_audio,
1341 .no_msp34xx = 1,
1342 .pll = PLL_28,
1343 .tuner_type = TUNER_PHILIPS_PAL,
1344 .tuner_addr = ADDR_UNSET,
1345 },
1346 [BTTV_BOARD_TERRATVALUER] = {
1347 .name = "Terratec TValueRadio",
1348 .video_inputs = 3,
1349 /* .audio_inputs= 1, */
1350 .svhs = 2,
1351 .gpiomask = 0xffff00,
1352 .muxsel = MUXSEL(2, 3, 1, 1),
1353 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1354 .gpiomute = 0x900,
1355 .pll = PLL_28,
1356 .tuner_type = TUNER_PHILIPS_PAL,
1357 .tuner_addr = ADDR_UNSET,
1358 .has_radio = 1,
1359 },
1360 [BTTV_BOARD_GVBCTV4PCI] = {
1361 /* TANAKA Kei <peg00625@nifty.com> */
1362 .name = "IODATA GV-BCTV4/PCI",
1363 .video_inputs = 3,
1364 /* .audio_inputs= 1, */
1365 .svhs = 2,
1366 .gpiomask = 0x010f00,
1367 .muxsel = MUXSEL(2, 3, 0, 0),
1368 .gpiomux = {0x10000, 0, 0x10000, 0 },
1369 .no_msp34xx = 1,
1370 .pll = PLL_28,
1371 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1372 .tuner_addr = ADDR_UNSET,
1373 .audio_mode_gpio= gvbctv3pci_audio,
1374 },
1375
1376 /* ---- card 0x44 ---------------------------------- */
1377 [BTTV_BOARD_VOODOOTV_FM] = {
1378 .name = "3Dfx VoodooTV FM (Euro)",
1379 /* try "insmod msp3400 simple=0" if you have
1380 * sound problems with this card. */
1381 .video_inputs = 4,
1382 /* .audio_inputs= 1, */
1383 .svhs = NO_SVHS,
1384 .gpiomask = 0x4f8a00,
1385 /* 0x100000: 1=MSP enabled (0=disable again)
1386 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1387 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1388 .gpiomute = 0x947fff,
1389 /* tvtuner, radio, external,internal, mute, stereo
1390 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1391 .muxsel = MUXSEL(2, 3, 0, 1),
1392 .tuner_type = TUNER_MT2032,
1393 .tuner_addr = ADDR_UNSET,
1394 .pll = PLL_28,
1395 .has_radio = 1,
1396 },
1397 [BTTV_BOARD_VOODOOTV_200] = {
1398 .name = "VoodooTV 200 (USA)",
1399 /* try "insmod msp3400 simple=0" if you have
1400 * sound problems with this card. */
1401 .video_inputs = 4,
1402 /* .audio_inputs= 1, */
1403 .svhs = NO_SVHS,
1404 .gpiomask = 0x4f8a00,
1405 /* 0x100000: 1=MSP enabled (0=disable again)
1406 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1407 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1408 .gpiomute = 0x947fff,
1409 /* tvtuner, radio, external,internal, mute, stereo
1410 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1411 .muxsel = MUXSEL(2, 3, 0, 1),
1412 .tuner_type = TUNER_MT2032,
1413 .tuner_addr = ADDR_UNSET,
1414 .pll = PLL_28,
1415 .has_radio = 1,
1416 },
1417 [BTTV_BOARD_AIMMS] = {
1418 /* Philip Blundell <pb@nexus.co.uk> */
1419 .name = "Active Imaging AIMMS",
1420 .video_inputs = 1,
1421 /* .audio_inputs= 0, */
1422 .tuner_type = TUNER_ABSENT,
1423 .tuner_addr = ADDR_UNSET,
1424 .pll = PLL_28,
1425 .muxsel = MUXSEL(2),
1426 .gpiomask = 0
1427 },
1428 [BTTV_BOARD_PV_BT878P_PLUS] = {
1429 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1430 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1431 .video_inputs = 3,
1432 /* .audio_inputs= 4, */
1433 .svhs = 2,
1434 .gpiomask = 15,
1435 .muxsel = MUXSEL(2, 3, 1, 1),
1436 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1437 .gpiomute = 13,
1438 .pll = PLL_28,
1439 .tuner_type = TUNER_LG_PAL_I_FM,
1440 .tuner_addr = ADDR_UNSET,
1441 .has_remote = 1,
1442 /* GPIO wiring:
1443 GPIO0: U4.A0 (hef4052bt)
1444 GPIO1: U4.A1
1445 GPIO2: U4.A1 (second hef4052bt)
1446 GPIO3: U4.nEN, U5.A0, A5.nEN
1447 GPIO8-15: vrd866b ?
1448 */
1449 },
1450 [BTTV_BOARD_FLYVIDEO98EZ] = {
1451 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1452 .video_inputs = 4,
1453 /* .audio_inputs= 0, */
1454 .svhs = 2,
1455 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1456 .muxsel = MUXSEL(2, 3, 1, 1),
1457 .pll = PLL_28,
1458 .no_msp34xx = 1,
1459 .tuner_type = TUNER_ABSENT,
1460 .tuner_addr = ADDR_UNSET,
1461 },
1462
1463 /* ---- card 0x48 ---------------------------------- */
1464 [BTTV_BOARD_PV_BT878P_9B] = {
1465 /* Dariusz Kowalewski <darekk@automex.pl> */
1466 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1467 .video_inputs = 4,
1468 /* .audio_inputs= 1, */
1469 .svhs = 2,
1470 .gpiomask = 0x3f,
1471 .muxsel = MUXSEL(2, 3, 1, 1),
1472 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1473 .gpiomute = 0x09,
1474 .no_msp34xx = 1,
1475 .pll = PLL_28,
1476 .tuner_type = TUNER_PHILIPS_PAL,
1477 .tuner_addr = ADDR_UNSET,
1478 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1479 .has_radio = 1, /* Note: not all cards have radio */
1480 .has_remote = 1,
1481 /* GPIO wiring:
1482 GPIO0: A0 hef4052
1483 GPIO1: A1 hef4052
1484 GPIO3: nEN hef4052
1485 GPIO8-15: vrd866b
1486 GPIO20,22,23: R30,R29,R28
1487 */
1488 },
1489 [BTTV_BOARD_SENSORAY311_611] = {
1490 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1491 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1492 .name = "Sensoray 311/611",
1493 .video_inputs = 5,
1494 /* .audio_inputs= 0, */
1495 .svhs = 4,
1496 .gpiomask = 0,
1497 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1498 .gpiomux = { 0 },
1499 .tuner_type = TUNER_ABSENT,
1500 .tuner_addr = ADDR_UNSET,
1501 },
1502 [BTTV_BOARD_RV605] = {
1503 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1504 .name = "RemoteVision MX (RV605)",
1505 .video_inputs = 16,
1506 /* .audio_inputs= 0, */
1507 .svhs = NO_SVHS,
1508 .gpiomask = 0x00,
1509 .gpiomask2 = 0x07ff,
1510 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1511 .no_msp34xx = 1,
1512 .tuner_type = TUNER_ABSENT,
1513 .tuner_addr = ADDR_UNSET,
1514 .muxsel_hook = rv605_muxsel,
1515 },
1516 [BTTV_BOARD_POWERCLR_MTV878] = {
1517 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1518 .video_inputs = 3,
1519 /* .audio_inputs= 2, */
1520 .svhs = 2,
1521 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1522 .muxsel = MUXSEL(2, 1, 1),
1523 .gpiomux = { 0, 1, 2, 2 },
1524 .gpiomute = 4,
1525 .tuner_type = TUNER_PHILIPS_PAL,
1526 .tuner_addr = ADDR_UNSET,
1527 .pll = PLL_28,
1528 .has_radio = 1,
1529 },
1530
1531 /* ---- card 0x4c ---------------------------------- */
1532 [BTTV_BOARD_WINDVR] = {
1533 /* Masaki Suzuki <masaki@btree.org> */
1534 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1535 .video_inputs = 3,
1536 /* .audio_inputs= 1, */
1537 .svhs = 2,
1538 .gpiomask = 0x140007,
1539 .muxsel = MUXSEL(2, 3, 1, 1),
1540 .gpiomux = { 0, 1, 2, 3 },
1541 .gpiomute = 4,
1542 .tuner_type = TUNER_PHILIPS_NTSC,
1543 .tuner_addr = ADDR_UNSET,
1544 .audio_mode_gpio= windvr_audio,
1545 },
1546 [BTTV_BOARD_GRANDTEC_MULTI] = {
1547 .name = "GrandTec Multi Capture Card (Bt878)",
1548 .video_inputs = 4,
1549 /* .audio_inputs= 0, */
1550 .svhs = NO_SVHS,
1551 .gpiomask = 0,
1552 .muxsel = MUXSEL(2, 3, 1, 0),
1553 .gpiomux = { 0 },
1554 .no_msp34xx = 1,
1555 .pll = PLL_28,
1556 .tuner_type = TUNER_ABSENT,
1557 .tuner_addr = ADDR_UNSET,
1558 },
1559 [BTTV_BOARD_KWORLD] = {
1560 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1561 .video_inputs = 4,
1562 /* .audio_inputs= 3, */
1563 .svhs = 2,
1564 .gpiomask = 7,
1565 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1566 .muxsel = MUXSEL(2, 3, 1, 1),
1567 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1568 * This card lacks external Audio In, so we mute it on Ext. & Int.
1569 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1570 * This card lacks PCI subsystem ID, sigh.
1571 * gpiomux =1: lower volume, 2+3: mute
1572 * btwincap uses 0x80000/0x80003
1573 */
1574 .gpiomute = 4,
1575 .no_msp34xx = 1,
1576 .pll = PLL_28,
1577 .tuner_type = TUNER_PHILIPS_PAL,
1578 .tuner_addr = ADDR_UNSET,
1579 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1580 radio signal strength indicators work fine. */
1581 .has_radio = 1,
1582 /* GPIO Info:
1583 GPIO0,1: HEF4052 A0,A1
1584 GPIO2: HEF4052 nENABLE
1585 GPIO3-7: n.c.
1586 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1587 GPIO14,15: ??
1588 GPIO16-21: n.c.
1589 GPIO22,23: ??
1590 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1591 },
1592 [BTTV_BOARD_DSP_TCVIDEO] = {
1593 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1594 .name = "DSP Design TCVIDEO",
1595 .video_inputs = 4,
1596 .svhs = NO_SVHS,
1597 .muxsel = MUXSEL(2, 3, 1, 0),
1598 .pll = PLL_28,
1599 .tuner_type = UNSET,
1600 .tuner_addr = ADDR_UNSET,
1601 },
1602
1603 /* ---- card 0x50 ---------------------------------- */
1604 [BTTV_BOARD_HAUPPAUGEPVR] = {
1605 .name = "Hauppauge WinTV PVR",
1606 .video_inputs = 4,
1607 /* .audio_inputs= 1, */
1608 .svhs = 2,
1609 .muxsel = MUXSEL(2, 0, 1, 1),
1610 .pll = PLL_28,
1611 .tuner_type = UNSET,
1612 .tuner_addr = ADDR_UNSET,
1613
1614 .gpiomask = 7,
1615 .gpiomux = {7},
1616 },
1617 [BTTV_BOARD_GVBCTV5PCI] = {
1618 .name = "IODATA GV-BCTV5/PCI",
1619 .video_inputs = 3,
1620 /* .audio_inputs= 1, */
1621 .svhs = 2,
1622 .gpiomask = 0x0f0f80,
1623 .muxsel = MUXSEL(2, 3, 1, 0),
1624 .gpiomux = {0x030000, 0x010000, 0, 0 },
1625 .gpiomute = 0x020000,
1626 .no_msp34xx = 1,
1627 .pll = PLL_28,
1628 .tuner_type = TUNER_PHILIPS_NTSC_M,
1629 .tuner_addr = ADDR_UNSET,
1630 .audio_mode_gpio= gvbctv5pci_audio,
1631 .has_radio = 1,
1632 },
1633 [BTTV_BOARD_OSPREY1x0] = {
1634 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1635 .video_inputs = 4, /* id-inputs-clock */
1636 /* .audio_inputs= 0, */
1637 .svhs = 3,
1638 .muxsel = MUXSEL(3, 2, 0, 1),
1639 .pll = PLL_28,
1640 .tuner_type = TUNER_ABSENT,
1641 .tuner_addr = ADDR_UNSET,
1642 .no_msp34xx = 1,
1643 .no_tda7432 = 1,
1644 },
1645 [BTTV_BOARD_OSPREY1x0_848] = {
1646 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1647 .video_inputs = 3,
1648 /* .audio_inputs= 0, */
1649 .svhs = 2,
1650 .muxsel = MUXSEL(2, 3, 1),
1651 .pll = PLL_28,
1652 .tuner_type = TUNER_ABSENT,
1653 .tuner_addr = ADDR_UNSET,
1654 .no_msp34xx = 1,
1655 .no_tda7432 = 1,
1656 },
1657
1658 /* ---- card 0x54 ---------------------------------- */
1659 [BTTV_BOARD_OSPREY101_848] = {
1660 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1661 .video_inputs = 2,
1662 /* .audio_inputs= 0, */
1663 .svhs = 1,
1664 .muxsel = MUXSEL(3, 1),
1665 .pll = PLL_28,
1666 .tuner_type = TUNER_ABSENT,
1667 .tuner_addr = ADDR_UNSET,
1668 .no_msp34xx = 1,
1669 .no_tda7432 = 1,
1670 },
1671 [BTTV_BOARD_OSPREY1x1] = {
1672 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1673 .video_inputs = 1,
1674 /* .audio_inputs= 0, */
1675 .svhs = NO_SVHS,
1676 .muxsel = MUXSEL(0),
1677 .pll = PLL_28,
1678 .tuner_type = TUNER_ABSENT,
1679 .tuner_addr = ADDR_UNSET,
1680 .no_msp34xx = 1,
1681 .no_tda7432 = 1,
1682 },
1683 [BTTV_BOARD_OSPREY1x1_SVID] = {
1684 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1685 .video_inputs = 2,
1686 /* .audio_inputs= 0, */
1687 .svhs = 1,
1688 .muxsel = MUXSEL(0, 1),
1689 .pll = PLL_28,
1690 .tuner_type = TUNER_ABSENT,
1691 .tuner_addr = ADDR_UNSET,
1692 .no_msp34xx = 1,
1693 .no_tda7432 = 1,
1694 },
1695 [BTTV_BOARD_OSPREY2xx] = {
1696 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1697 .video_inputs = 1,
1698 /* .audio_inputs= 1, */
1699 .svhs = NO_SVHS,
1700 .muxsel = MUXSEL(0),
1701 .pll = PLL_28,
1702 .tuner_type = TUNER_ABSENT,
1703 .tuner_addr = ADDR_UNSET,
1704 .no_msp34xx = 1,
1705 .no_tda7432 = 1,
1706 },
1707
1708 /* ---- card 0x58 ---------------------------------- */
1709 [BTTV_BOARD_OSPREY2x0_SVID] = {
1710 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1711 .video_inputs = 2,
1712 /* .audio_inputs= 1, */
1713 .svhs = 1,
1714 .muxsel = MUXSEL(0, 1),
1715 .pll = PLL_28,
1716 .tuner_type = TUNER_ABSENT,
1717 .tuner_addr = ADDR_UNSET,
1718 .no_msp34xx = 1,
1719 .no_tda7432 = 1,
1720 },
1721 [BTTV_BOARD_OSPREY2x0] = {
1722 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1723 .video_inputs = 2,
1724 /* .audio_inputs= 1, */
1725 .svhs = 1,
1726 .muxsel = MUXSEL(2, 3),
1727 .pll = PLL_28,
1728 .tuner_type = TUNER_ABSENT,
1729 .tuner_addr = ADDR_UNSET,
1730 .no_msp34xx = 1,
1731 .no_tda7432 = 1,
1732 },
1733 [BTTV_BOARD_OSPREY500] = {
1734 .name = "Osprey 500", /* 500 */
1735 .video_inputs = 2,
1736 /* .audio_inputs= 1, */
1737 .svhs = 1,
1738 .muxsel = MUXSEL(2, 3),
1739 .pll = PLL_28,
1740 .tuner_type = TUNER_ABSENT,
1741 .tuner_addr = ADDR_UNSET,
1742 .no_msp34xx = 1,
1743 .no_tda7432 = 1,
1744 },
1745 [BTTV_BOARD_OSPREY540] = {
1746 .name = "Osprey 540", /* 540 */
1747 .video_inputs = 4,
1748 /* .audio_inputs= 1, */
1749 .pll = PLL_28,
1750 .tuner_type = TUNER_ABSENT,
1751 .tuner_addr = ADDR_UNSET,
1752 .no_msp34xx = 1,
1753 .no_tda7432 = 1,
1754 },
1755
1756 /* ---- card 0x5C ---------------------------------- */
1757 [BTTV_BOARD_OSPREY2000] = {
1758 .name = "Osprey 2000", /* 2000 */
1759 .video_inputs = 2,
1760 /* .audio_inputs= 1, */
1761 .svhs = 1,
1762 .muxsel = MUXSEL(2, 3),
1763 .pll = PLL_28,
1764 .tuner_type = TUNER_ABSENT,
1765 .tuner_addr = ADDR_UNSET,
1766 .no_msp34xx = 1,
1767 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1768 },
1769 [BTTV_BOARD_IDS_EAGLE] = {
1770 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1771 .name = "IDS Eagle",
1772 .video_inputs = 4,
1773 /* .audio_inputs= 0, */
1774 .tuner_type = TUNER_ABSENT,
1775 .tuner_addr = ADDR_UNSET,
1776 .svhs = NO_SVHS,
1777 .gpiomask = 0,
1778 .muxsel = MUXSEL(2, 2, 2, 2),
1779 .muxsel_hook = eagle_muxsel,
1780 .no_msp34xx = 1,
1781 .pll = PLL_28,
1782 },
1783 [BTTV_BOARD_PINNACLESAT] = {
1784 .name = "Pinnacle PCTV Sat",
1785 .video_inputs = 2,
1786 /* .audio_inputs= 0, */
1787 .svhs = 1,
1788 .tuner_type = TUNER_ABSENT,
1789 .tuner_addr = ADDR_UNSET,
1790 .no_msp34xx = 1,
1791 .no_tda7432 = 1,
1792 .muxsel = MUXSEL(3, 1),
1793 .pll = PLL_28,
1794 .no_gpioirq = 1,
1795 .has_dvb = 1,
1796 },
1797 [BTTV_BOARD_FORMAC_PROTV] = {
1798 .name = "Formac ProTV II (bt878)",
1799 .video_inputs = 4,
1800 /* .audio_inputs= 1, */
1801 .svhs = 3,
1802 .gpiomask = 2,
1803 /* TV, Comp1, Composite over SVID con, SVID */
1804 .muxsel = MUXSEL(2, 3, 1, 1),
1805 .gpiomux = { 2, 2, 0, 0 },
1806 .pll = PLL_28,
1807 .has_radio = 1,
1808 .tuner_type = TUNER_PHILIPS_PAL,
1809 .tuner_addr = ADDR_UNSET,
1810 /* sound routing:
1811 GPIO=0x00,0x01,0x03: mute (?)
1812 0x02: both TV and radio (tuner: FM1216/I)
1813 The card has onboard audio connectors labeled "cdrom" and "board",
1814 not soldered here, though unknown wiring.
1815 Card lacks: external audio in, pci subsystem id.
1816 */
1817 },
1818
1819 /* ---- card 0x60 ---------------------------------- */
1820 [BTTV_BOARD_MACHTV] = {
1821 .name = "MachTV",
1822 .video_inputs = 3,
1823 /* .audio_inputs= 1, */
1824 .svhs = NO_SVHS,
1825 .gpiomask = 7,
1826 .muxsel = MUXSEL(2, 3, 1, 1),
1827 .gpiomux = { 0, 1, 2, 3},
1828 .gpiomute = 4,
1829 .tuner_type = TUNER_PHILIPS_PAL,
1830 .tuner_addr = ADDR_UNSET,
1831 .pll = PLL_28,
1832 },
1833 [BTTV_BOARD_EURESYS_PICOLO] = {
1834 .name = "Euresys Picolo",
1835 .video_inputs = 3,
1836 /* .audio_inputs= 0, */
1837 .svhs = 2,
1838 .gpiomask = 0,
1839 .no_msp34xx = 1,
1840 .no_tda7432 = 1,
1841 .muxsel = MUXSEL(2, 0, 1),
1842 .pll = PLL_28,
1843 .tuner_type = TUNER_ABSENT,
1844 .tuner_addr = ADDR_UNSET,
1845 },
1846 [BTTV_BOARD_PV150] = {
1847 /* Luc Van Hoeylandt <luc@e-magic.be> */
1848 .name = "ProVideo PV150", /* 0x4f */
1849 .video_inputs = 2,
1850 /* .audio_inputs= 0, */
1851 .svhs = NO_SVHS,
1852 .gpiomask = 0,
1853 .muxsel = MUXSEL(2, 3),
1854 .gpiomux = { 0 },
1855 .no_msp34xx = 1,
1856 .pll = PLL_28,
1857 .tuner_type = TUNER_ABSENT,
1858 .tuner_addr = ADDR_UNSET,
1859 },
1860 [BTTV_BOARD_AD_TVK503] = {
1861 /* Hiroshi Takekawa <sian@big.or.jp> */
1862 /* This card lacks subsystem ID */
1863 .name = "AD-TVK503", /* 0x63 */
1864 .video_inputs = 4,
1865 /* .audio_inputs= 1, */
1866 .svhs = 2,
1867 .gpiomask = 0x001e8007,
1868 .muxsel = MUXSEL(2, 3, 1, 0),
1869 /* Tuner, Radio, external, internal, off, on */
1870 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1871 .gpiomute = 0x0f,
1872 .no_msp34xx = 1,
1873 .pll = PLL_28,
1874 .tuner_type = TUNER_PHILIPS_NTSC,
1875 .tuner_addr = ADDR_UNSET,
1876 .audio_mode_gpio= adtvk503_audio,
1877 },
1878
1879 /* ---- card 0x64 ---------------------------------- */
1880 [BTTV_BOARD_HERCULES_SM_TV] = {
1881 .name = "Hercules Smart TV Stereo",
1882 .video_inputs = 4,
1883 /* .audio_inputs= 1, */
1884 .svhs = 2,
1885 .gpiomask = 0x00,
1886 .muxsel = MUXSEL(2, 3, 1, 1),
1887 .no_msp34xx = 1,
1888 .pll = PLL_28,
1889 .tuner_type = TUNER_PHILIPS_PAL,
1890 .tuner_addr = ADDR_UNSET,
1891 /* Notes:
1892 - card lacks subsystem ID
1893 - stereo variant w/ daughter board with tda9874a @0xb0
1894 - Audio Routing:
1895 always from tda9874 independent of GPIO (?)
1896 external line in: unknown
1897 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1898 hef4053 (instead 4052) for unknown function
1899 */
1900 },
1901 [BTTV_BOARD_PACETV] = {
1902 .name = "Pace TV & Radio Card",
1903 .video_inputs = 4,
1904 /* .audio_inputs= 1, */
1905 .svhs = 2,
1906 /* Tuner, CVid, SVid, CVid over SVid connector */
1907 .muxsel = MUXSEL(2, 3, 1, 1),
1908 .gpiomask = 0,
1909 .no_tda7432 = 1,
1910 .tuner_type = TUNER_PHILIPS_PAL_I,
1911 .tuner_addr = ADDR_UNSET,
1912 .has_radio = 1,
1913 .pll = PLL_28,
1914 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1915 only internal line out: (4pin header) RGGL
1916 Radio must be decoded by msp3410d (not routed through)*/
1917 /*
1918 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1919 */
1920 },
1921 [BTTV_BOARD_IVC200] = {
1922 /* Chris Willing <chris@vislab.usyd.edu.au> */
1923 .name = "IVC-200",
1924 .video_inputs = 1,
1925 /* .audio_inputs= 0, */
1926 .tuner_type = TUNER_ABSENT,
1927 .tuner_addr = ADDR_UNSET,
1928 .svhs = NO_SVHS,
1929 .gpiomask = 0xdf,
1930 .muxsel = MUXSEL(2),
1931 .pll = PLL_28,
1932 },
1933 [BTTV_BOARD_IVCE8784] = {
1934 .name = "IVCE-8784",
1935 .video_inputs = 1,
1936 /* .audio_inputs= 0, */
1937 .tuner_type = TUNER_ABSENT,
1938 .tuner_addr = ADDR_UNSET,
1939 .svhs = NO_SVHS,
1940 .gpiomask = 0xdf,
1941 .muxsel = MUXSEL(2),
1942 .pll = PLL_28,
1943 },
1944 [BTTV_BOARD_XGUARD] = {
1945 .name = "Grand X-Guard / Trust 814PCI",
1946 .video_inputs = 16,
1947 /* .audio_inputs= 0, */
1948 .svhs = NO_SVHS,
1949 .tuner_type = TUNER_ABSENT,
1950 .tuner_addr = ADDR_UNSET,
1951 .gpiomask2 = 0xff,
1952 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1953 .muxsel_hook = xguard_muxsel,
1954 .no_msp34xx = 1,
1955 .no_tda7432 = 1,
1956 .pll = PLL_28,
1957 },
1958
1959 /* ---- card 0x68 ---------------------------------- */
1960 [BTTV_BOARD_NEBULA_DIGITV] = {
1961 .name = "Nebula Electronics DigiTV",
1962 .video_inputs = 1,
1963 .svhs = NO_SVHS,
1964 .muxsel = MUXSEL(2, 3, 1, 0),
1965 .no_msp34xx = 1,
1966 .no_tda7432 = 1,
1967 .pll = PLL_28,
1968 .tuner_type = TUNER_ABSENT,
1969 .tuner_addr = ADDR_UNSET,
1970 .has_dvb = 1,
1971 .has_remote = 1,
1972 .gpiomask = 0x1b,
1973 .no_gpioirq = 1,
1974 },
1975 [BTTV_BOARD_PV143] = {
1976 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1977 .name = "ProVideo PV143",
1978 .video_inputs = 4,
1979 /* .audio_inputs= 0, */
1980 .svhs = NO_SVHS,
1981 .gpiomask = 0,
1982 .muxsel = MUXSEL(2, 3, 1, 0),
1983 .gpiomux = { 0 },
1984 .no_msp34xx = 1,
1985 .pll = PLL_28,
1986 .tuner_type = TUNER_ABSENT,
1987 .tuner_addr = ADDR_UNSET,
1988 },
1989 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1990 /* M.Klahr@phytec.de */
1991 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1992 .video_inputs = 4,
1993 /* .audio_inputs= 0, */
1994 .svhs = 3,
1995 .gpiomask = 0x00,
1996 .muxsel = MUXSEL(2, 3, 1, 0),
1997 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
1998 .pll = PLL_28,
1999 .tuner_type = TUNER_ABSENT,
2000 .tuner_addr = ADDR_UNSET,
2001 },
2002 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2003 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2004 .video_inputs = 4,
2005 /* .audio_inputs= 0, */
2006 .svhs = 3,
2007 .gpiomask = 0x00,
2008 .muxsel = MUXSEL(2, 3, 1, 1),
2009 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2010 .pll = PLL_28,
2011 .tuner_type = TUNER_ABSENT,
2012 .tuner_addr = ADDR_UNSET,
2013 },
2014
2015 /* ---- card 0x6c ---------------------------------- */
2016 [BTTV_BOARD_VD009_MINIDIN] = {
2017 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2018 .video_inputs = 10,
2019 /* .audio_inputs= 0, */
2020 .svhs = 9,
2021 .gpiomask = 0x00,
2022 .gpiomask2 = 0x03, /* used for external vodeo mux */
2023 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2024 .muxsel_hook = phytec_muxsel,
2025 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2026 .pll = PLL_28,
2027 .tuner_type = TUNER_ABSENT,
2028 .tuner_addr = ADDR_UNSET,
2029 },
2030 [BTTV_BOARD_VD009_COMBI] = {
2031 .name = "PHYTEC VD-009 Combi (bt878)",
2032 .video_inputs = 10,
2033 /* .audio_inputs= 0, */
2034 .svhs = 9,
2035 .gpiomask = 0x00,
2036 .gpiomask2 = 0x03, /* used for external vodeo mux */
2037 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2038 .muxsel_hook = phytec_muxsel,
2039 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2040 .pll = PLL_28,
2041 .tuner_type = TUNER_ABSENT,
2042 .tuner_addr = ADDR_UNSET,
2043 },
2044 [BTTV_BOARD_IVC100] = {
2045 .name = "IVC-100",
2046 .video_inputs = 4,
2047 /* .audio_inputs= 0, */
2048 .tuner_type = TUNER_ABSENT,
2049 .tuner_addr = ADDR_UNSET,
2050 .svhs = NO_SVHS,
2051 .gpiomask = 0xdf,
2052 .muxsel = MUXSEL(2, 3, 1, 0),
2053 .pll = PLL_28,
2054 },
2055 [BTTV_BOARD_IVC120] = {
2056 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2057 .name = "IVC-120G",
2058 .video_inputs = 16,
2059 /* .audio_inputs= 0, */
2060 .tuner_type = TUNER_ABSENT,
2061 .tuner_addr = ADDR_UNSET,
2062 .svhs = NO_SVHS, /* card has no svhs */
2063 .no_msp34xx = 1,
2064 .no_tda7432 = 1,
2065 .gpiomask = 0x00,
2066 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2067 .muxsel_hook = ivc120_muxsel,
2068 .pll = PLL_28,
2069 },
2070
2071 /* ---- card 0x70 ---------------------------------- */
2072 [BTTV_BOARD_PC_HDTV] = {
2073 .name = "pcHDTV HD-2000 TV",
2074 .video_inputs = 4,
2075 /* .audio_inputs= 1, */
2076 .svhs = 2,
2077 .muxsel = MUXSEL(2, 3, 1, 0),
2078 .tuner_type = TUNER_PHILIPS_FCV1236D,
2079 .tuner_addr = ADDR_UNSET,
2080 .has_dvb = 1,
2081 },
2082 [BTTV_BOARD_TWINHAN_DST] = {
2083 .name = "Twinhan DST + clones",
2084 .no_msp34xx = 1,
2085 .no_tda7432 = 1,
2086 .tuner_type = TUNER_ABSENT,
2087 .tuner_addr = ADDR_UNSET,
2088 .no_video = 1,
2089 .has_dvb = 1,
2090 },
2091 [BTTV_BOARD_WINFASTVC100] = {
2092 .name = "Winfast VC100",
2093 .video_inputs = 3,
2094 /* .audio_inputs= 0, */
2095 .svhs = 1,
2096 /* Vid In, SVid In, Vid over SVid in connector */
2097 .muxsel = MUXSEL(3, 1, 1, 3),
2098 .no_msp34xx = 1,
2099 .no_tda7432 = 1,
2100 .tuner_type = TUNER_ABSENT,
2101 .tuner_addr = ADDR_UNSET,
2102 .pll = PLL_28,
2103 },
2104 [BTTV_BOARD_TEV560] = {
2105 .name = "Teppro TEV-560/InterVision IV-560",
2106 .video_inputs = 3,
2107 /* .audio_inputs= 1, */
2108 .svhs = 2,
2109 .gpiomask = 3,
2110 .muxsel = MUXSEL(2, 3, 1, 1),
2111 .gpiomux = { 1, 1, 1, 1 },
2112 .tuner_type = TUNER_PHILIPS_PAL,
2113 .tuner_addr = ADDR_UNSET,
2114 .pll = PLL_35,
2115 },
2116
2117 /* ---- card 0x74 ---------------------------------- */
2118 [BTTV_BOARD_SIMUS_GVC1100] = {
2119 .name = "SIMUS GVC1100",
2120 .video_inputs = 4,
2121 /* .audio_inputs= 0, */
2122 .svhs = NO_SVHS,
2123 .tuner_type = TUNER_ABSENT,
2124 .tuner_addr = ADDR_UNSET,
2125 .pll = PLL_28,
2126 .muxsel = MUXSEL(2, 2, 2, 2),
2127 .gpiomask = 0x3F,
2128 .muxsel_hook = gvc1100_muxsel,
2129 },
2130 [BTTV_BOARD_NGSTV_PLUS] = {
2131 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2132 .name = "NGS NGSTV+",
2133 .video_inputs = 3,
2134 .svhs = 2,
2135 .gpiomask = 0x008007,
2136 .muxsel = MUXSEL(2, 3, 0, 0),
2137 .gpiomux = { 0, 0, 0, 0 },
2138 .gpiomute = 0x000003,
2139 .pll = PLL_28,
2140 .tuner_type = TUNER_PHILIPS_PAL,
2141 .tuner_addr = ADDR_UNSET,
2142 .has_remote = 1,
2143 },
2144 [BTTV_BOARD_LMLBT4] = {
2145 /* http://linuxmedialabs.com */
2146 .name = "LMLBT4",
2147 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2148 /* .audio_inputs= 0, */
2149 .svhs = NO_SVHS,
2150 .muxsel = MUXSEL(2, 3, 1, 0),
2151 .no_msp34xx = 1,
2152 .no_tda7432 = 1,
2153 .tuner_type = TUNER_ABSENT,
2154 .tuner_addr = ADDR_UNSET,
2155 },
2156 [BTTV_BOARD_TEKRAM_M205] = {
2157 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2158 .name = "Tekram M205 PRO",
2159 .video_inputs = 3,
2160 /* .audio_inputs= 1, */
2161 .tuner_type = TUNER_PHILIPS_PAL,
2162 .tuner_addr = ADDR_UNSET,
2163 .svhs = 2,
2164 .gpiomask = 0x68,
2165 .muxsel = MUXSEL(2, 3, 1),
2166 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2167 .pll = PLL_28,
2168 },
2169
2170 /* ---- card 0x78 ---------------------------------- */
2171 [BTTV_BOARD_CONTVFMI] = {
2172 /* Javier Cendan Ares <jcendan@lycos.es> */
2173 /* bt878 TV + FM without subsystem ID */
2174 .name = "Conceptronic CONTVFMi",
2175 .video_inputs = 3,
2176 /* .audio_inputs= 1, */
2177 .svhs = 2,
2178 .gpiomask = 0x008007,
2179 .muxsel = MUXSEL(2, 3, 1, 1),
2180 .gpiomux = { 0, 1, 2, 2 },
2181 .gpiomute = 3,
2182 .pll = PLL_28,
2183 .tuner_type = TUNER_PHILIPS_PAL,
2184 .tuner_addr = ADDR_UNSET,
2185 .has_remote = 1,
2186 .has_radio = 1,
2187 },
2188 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2189 /*Eric DEBIEF <debief@telemsa.com>*/
2190 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2191 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2192 /*0x79 in bttv.h*/
2193 .name = "Euresys Picolo Tetra",
2194 .video_inputs = 4,
2195 /* .audio_inputs= 0, */
2196 .svhs = NO_SVHS,
2197 .gpiomask = 0,
2198 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2199 .no_msp34xx = 1,
2200 .no_tda7432 = 1,
2201 /*878A input is always MUX0, see above.*/
2202 .muxsel = MUXSEL(2, 2, 2, 2),
2203 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2204 .pll = PLL_28,
2205 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2206 .tuner_type = TUNER_ABSENT,
2207 .tuner_addr = ADDR_UNSET,
2208 },
2209 [BTTV_BOARD_SPIRIT_TV] = {
2210 /* Spirit TV Tuner from http://spiritmodems.com.au */
2211 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2212 .name = "Spirit TV Tuner",
2213 .video_inputs = 3,
2214 /* .audio_inputs= 1, */
2215 .svhs = 2,
2216 .gpiomask = 0x0000000f,
2217 .muxsel = MUXSEL(2, 1, 1),
2218 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2219 .tuner_type = TUNER_TEMIC_PAL,
2220 .tuner_addr = ADDR_UNSET,
2221 .no_msp34xx = 1,
2222 },
2223 [BTTV_BOARD_AVDVBT_771] = {
2224 /* Wolfram Joost <wojo@frokaschwei.de> */
2225 .name = "AVerMedia AVerTV DVB-T 771",
2226 .video_inputs = 2,
2227 .svhs = 1,
2228 .tuner_type = TUNER_ABSENT,
2229 .tuner_addr = ADDR_UNSET,
2230 .muxsel = MUXSEL(3, 3),
2231 .no_msp34xx = 1,
2232 .no_tda7432 = 1,
2233 .pll = PLL_28,
2234 .has_dvb = 1,
2235 .no_gpioirq = 1,
2236 .has_remote = 1,
2237 },
2238 /* ---- card 0x7c ---------------------------------- */
2239 [BTTV_BOARD_AVDVBT_761] = {
2240 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2241 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2242 .name = "AverMedia AverTV DVB-T 761",
2243 .video_inputs = 2,
2244 .svhs = 1,
2245 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2246 .no_msp34xx = 1,
2247 .no_tda7432 = 1,
2248 .pll = PLL_28,
2249 .tuner_type = TUNER_ABSENT,
2250 .tuner_addr = ADDR_UNSET,
2251 .has_dvb = 1,
2252 .no_gpioirq = 1,
2253 .has_remote = 1,
2254 },
2255 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2256 /* andre.schwarz@matrix-vision.de */
2257 .name = "MATRIX Vision Sigma-SQ",
2258 .video_inputs = 16,
2259 /* .audio_inputs= 0, */
2260 .svhs = NO_SVHS,
2261 .gpiomask = 0x0,
2262 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2263 .muxsel_hook = sigmaSQ_muxsel,
2264 .gpiomux = { 0 },
2265 .no_msp34xx = 1,
2266 .pll = PLL_28,
2267 .tuner_type = TUNER_ABSENT,
2268 .tuner_addr = ADDR_UNSET,
2269 },
2270 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2271 /* andre.schwarz@matrix-vision.de */
2272 .name = "MATRIX Vision Sigma-SLC",
2273 .video_inputs = 4,
2274 /* .audio_inputs= 0, */
2275 .svhs = NO_SVHS,
2276 .gpiomask = 0x0,
2277 .muxsel = MUXSEL(2, 2, 2, 2),
2278 .muxsel_hook = sigmaSLC_muxsel,
2279 .gpiomux = { 0 },
2280 .no_msp34xx = 1,
2281 .pll = PLL_28,
2282 .tuner_type = TUNER_ABSENT,
2283 .tuner_addr = ADDR_UNSET,
2284 },
2285 /* BTTV_BOARD_APAC_VIEWCOMP */
2286 [BTTV_BOARD_APAC_VIEWCOMP] = {
2287 /* Attila Kondoros <attila.kondoros@chello.hu> */
2288 /* bt878 TV + FM 0x00000000 subsystem ID */
2289 .name = "APAC Viewcomp 878(AMAX)",
2290 .video_inputs = 2,
2291 /* .audio_inputs= 1, */
2292 .svhs = NO_SVHS,
2293 .gpiomask = 0xFF,
2294 .muxsel = MUXSEL(2, 3, 1, 1),
2295 .gpiomux = { 2, 0, 0, 0 },
2296 .gpiomute = 10,
2297 .pll = PLL_28,
2298 .tuner_type = TUNER_PHILIPS_PAL,
2299 .tuner_addr = ADDR_UNSET,
2300 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2301 .has_radio = 1, /* not every card has radio */
2302 },
2303
2304 /* ---- card 0x80 ---------------------------------- */
2305 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2306 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2307 .name = "DViCO FusionHDTV DVB-T Lite",
2308 .no_msp34xx = 1,
2309 .no_tda7432 = 1,
2310 .pll = PLL_28,
2311 .no_video = 1,
2312 .has_dvb = 1,
2313 .tuner_type = TUNER_ABSENT,
2314 .tuner_addr = ADDR_UNSET,
2315 },
2316 [BTTV_BOARD_VGEAR_MYVCD] = {
2317 /* Steven <photon38@pchome.com.tw> */
2318 .name = "V-Gear MyVCD",
2319 .video_inputs = 3,
2320 /* .audio_inputs= 1, */
2321 .svhs = 2,
2322 .gpiomask = 0x3f,
2323 .muxsel = MUXSEL(2, 3, 1, 0),
2324 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2325 .gpiomute = 0x31,
2326 .no_msp34xx = 1,
2327 .pll = PLL_28,
2328 .tuner_type = TUNER_PHILIPS_NTSC_M,
2329 .tuner_addr = ADDR_UNSET,
2330 .has_radio = 0,
2331 },
2332 [BTTV_BOARD_SUPER_TV] = {
2333 /* Rick C <cryptdragoon@gmail.com> */
2334 .name = "Super TV Tuner",
2335 .video_inputs = 4,
2336 /* .audio_inputs= 1, */
2337 .svhs = 2,
2338 .muxsel = MUXSEL(2, 3, 1, 0),
2339 .tuner_type = TUNER_PHILIPS_NTSC,
2340 .tuner_addr = ADDR_UNSET,
2341 .gpiomask = 0x008007,
2342 .gpiomux = { 0, 0x000001,0,0 },
2343 .has_radio = 1,
2344 },
2345 [BTTV_BOARD_TIBET_CS16] = {
2346 /* Chris Fanning <video4linux@haydon.net> */
2347 .name = "Tibet Systems 'Progress DVR' CS16",
2348 .video_inputs = 16,
2349 /* .audio_inputs= 0, */
2350 .svhs = NO_SVHS,
2351 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2352 .pll = PLL_28,
2353 .no_msp34xx = 1,
2354 .no_tda7432 = 1,
2355 .tuner_type = TUNER_ABSENT,
2356 .tuner_addr = ADDR_UNSET,
2357 .muxsel_hook = tibetCS16_muxsel,
2358 },
2359 [BTTV_BOARD_KODICOM_4400R] = {
2360 /* Bill Brack <wbrack@mmm.com.hk> */
2361 /*
2362 * Note that, because of the card's wiring, the "master"
2363 * BT878A chip (i.e. the one which controls the analog switch
2364 * and must use this card type) is the 2nd one detected. The
2365 * other 3 chips should use card type 0x85, whose description
2366 * follows this one. There is a EEPROM on the card (which is
2367 * connected to the I2C of one of those other chips), but is
2368 * not currently handled. There is also a facility for a
2369 * "monitor", which is also not currently implemented.
2370 */
2371 .name = "Kodicom 4400R (master)",
2372 .video_inputs = 16,
2373 /* .audio_inputs= 0, */
2374 .tuner_type = TUNER_ABSENT,
2375 .tuner_addr = ADDR_UNSET,
2376 .svhs = NO_SVHS,
2377 /* GPIO bits 0-9 used for analog switch:
2378 * 00 - 03: camera selector
2379 * 04 - 06: channel (controller) selector
2380 * 07: data (1->on, 0->off)
2381 * 08: strobe
2382 * 09: reset
2383 * bit 16 is input from sync separator for the channel
2384 */
2385 .gpiomask = 0x0003ff,
2386 .no_gpioirq = 1,
2387 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2388 .pll = PLL_28,
2389 .no_msp34xx = 1,
2390 .no_tda7432 = 1,
2391 .muxsel_hook = kodicom4400r_muxsel,
2392 },
2393 [BTTV_BOARD_KODICOM_4400R_SL] = {
2394 /* Bill Brack <wbrack@mmm.com.hk> */
2395 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2396 * one which controls the analog switch, and must use the card type)
2397 * is the 2nd one detected. The other 3 chips should use this card
2398 * type
2399 */
2400 .name = "Kodicom 4400R (slave)",
2401 .video_inputs = 16,
2402 /* .audio_inputs= 0, */
2403 .tuner_type = TUNER_ABSENT,
2404 .tuner_addr = ADDR_UNSET,
2405 .svhs = NO_SVHS,
2406 .gpiomask = 0x010000,
2407 .no_gpioirq = 1,
2408 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2409 .pll = PLL_28,
2410 .no_msp34xx = 1,
2411 .no_tda7432 = 1,
2412 .muxsel_hook = kodicom4400r_muxsel,
2413 },
2414 /* ---- card 0x86---------------------------------- */
2415 [BTTV_BOARD_ADLINK_RTV24] = {
2416 /* Michael Henson <mhenson@clarityvi.com> */
2417 /* Adlink RTV24 with special unlock codes */
2418 .name = "Adlink RTV24",
2419 .video_inputs = 4,
2420 /* .audio_inputs= 1, */
2421 .svhs = 2,
2422 .muxsel = MUXSEL(2, 3, 1, 0),
2423 .tuner_type = UNSET,
2424 .tuner_addr = ADDR_UNSET,
2425 .pll = PLL_28,
2426 },
2427 /* ---- card 0x87---------------------------------- */
2428 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2429 /* Michael Krufky <mkrufky@m1k.net> */
2430 .name = "DViCO FusionHDTV 5 Lite",
2431 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2432 .tuner_addr = ADDR_UNSET,
2433 .video_inputs = 3,
2434 /* .audio_inputs= 1, */
2435 .svhs = 2,
2436 .muxsel = MUXSEL(2, 3, 1),
2437 .gpiomask = 0x00e00007,
2438 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2439 .gpiomute = 0x00c00007,
2440 .no_msp34xx = 1,
2441 .no_tda7432 = 1,
2442 .has_dvb = 1,
2443 },
2444 /* ---- card 0x88---------------------------------- */
2445 [BTTV_BOARD_ACORP_Y878F] = {
2446 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2447 .name = "Acorp Y878F",
2448 .video_inputs = 3,
2449 /* .audio_inputs= 1, */
2450 .svhs = 2,
2451 .gpiomask = 0x01fe00,
2452 .muxsel = MUXSEL(2, 3, 1, 1),
2453 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2454 .gpiomute = 0x002000,
2455 .pll = PLL_28,
2456 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2457 .tuner_addr = 0xc1 >>1,
2458 .has_radio = 1,
2459 },
2460 /* ---- card 0x89 ---------------------------------- */
2461 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2462 .name = "Conceptronic CTVFMi v2",
2463 .video_inputs = 3,
2464 /* .audio_inputs= 1, */
2465 .svhs = 2,
2466 .gpiomask = 0x001c0007,
2467 .muxsel = MUXSEL(2, 3, 1, 1),
2468 .gpiomux = { 0, 1, 2, 2 },
2469 .gpiomute = 3,
2470 .pll = PLL_28,
2471 .tuner_type = TUNER_TENA_9533_DI,
2472 .tuner_addr = ADDR_UNSET,
2473 .has_remote = 1,
2474 .has_radio = 1,
2475 },
2476 /* ---- card 0x8a ---------------------------------- */
2477 [BTTV_BOARD_PV_BT878P_2E] = {
2478 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2479 .video_inputs = 5,
2480 /* .audio_inputs= 1, */
2481 .svhs = 3,
2482 .has_dig_in = 1,
2483 .gpiomask = 0x01fe00,
2484 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2485 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2486 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2487 .gpiomute = 0x12400,
2488 .no_msp34xx = 1,
2489 .pll = PLL_28,
2490 .tuner_type = TUNER_LG_PAL_FM,
2491 .tuner_addr = ADDR_UNSET,
2492 .has_remote = 1,
2493 },
2494 /* ---- card 0x8b ---------------------------------- */
2495 [BTTV_BOARD_PV_M4900] = {
2496 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2497 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2498 .video_inputs = 3,
2499 /* .audio_inputs= 1, */
2500 .svhs = 2,
2501 .gpiomask = 0x3f,
2502 .muxsel = MUXSEL(2, 3, 1, 1),
2503 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2504 .gpiomute = 0x29,
2505 .no_msp34xx = 1,
2506 .pll = PLL_28,
2507 .tuner_type = TUNER_YMEC_TVF_5533MF,
2508 .tuner_addr = ADDR_UNSET,
2509 .has_radio = 1,
2510 .has_remote = 1,
2511 },
2512 /* ---- card 0x8c ---------------------------------- */
2513 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2514 one external BNC composite input (mux 2)
2515 three internal composite inputs (unknown muxes)
2516 an 18-bit stereo A/D (CS5331A), which has:
2517 one external stereo unblanced (RCA) audio connection
2518 one (or 3?) internal stereo balanced (XLR) audio connection
2519 input is selected via gpio to a 14052B mux
2520 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2521 gain is controlled via an X9221A chip on the I2C bus @0x28
2522 sample rate is controlled via gpio to an MK1413S
2523 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2524 There is neither a tuner nor an svideo input. */
2525 [BTTV_BOARD_OSPREY440] = {
2526 .name = "Osprey 440",
2527 .video_inputs = 4,
2528 /* .audio_inputs= 2, */
2529 .svhs = NO_SVHS,
2530 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2531 .gpiomask = 0x303,
2532 .gpiomute = 0x000, /* int + 32kHz */
2533 .gpiomux = { 0, 0, 0x000, 0x100},
2534 .pll = PLL_28,
2535 .tuner_type = TUNER_ABSENT,
2536 .tuner_addr = ADDR_UNSET,
2537 .no_msp34xx = 1,
2538 .no_tda7432 = 1,
2539 },
2540 /* ---- card 0x8d ---------------------------------- */
2541 [BTTV_BOARD_ASOUND_SKYEYE] = {
2542 .name = "Asound Skyeye PCTV",
2543 .video_inputs = 3,
2544 /* .audio_inputs= 1, */
2545 .svhs = 2,
2546 .gpiomask = 15,
2547 .muxsel = MUXSEL(2, 3, 1, 1),
2548 .gpiomux = { 2, 0, 0, 0 },
2549 .gpiomute = 1,
2550 .pll = PLL_28,
2551 .tuner_type = TUNER_PHILIPS_NTSC,
2552 .tuner_addr = ADDR_UNSET,
2553 },
2554 /* ---- card 0x8e ---------------------------------- */
2555 [BTTV_BOARD_SABRENT_TVFM] = {
2556 .name = "Sabrent TV-FM (bttv version)",
2557 .video_inputs = 3,
2558 /* .audio_inputs= 1, */
2559 .svhs = 2,
2560 .gpiomask = 0x108007,
2561 .muxsel = MUXSEL(2, 3, 1, 1),
2562 .gpiomux = { 100000, 100002, 100002, 100000 },
2563 .no_msp34xx = 1,
2564 .no_tda7432 = 1,
2565 .pll = PLL_28,
2566 .tuner_type = TUNER_TNF_5335MF,
2567 .tuner_addr = ADDR_UNSET,
2568 .has_radio = 1,
2569 },
2570 /* ---- card 0x8f ---------------------------------- */
2571 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2572 .name = "Hauppauge ImpactVCB (bt878)",
2573 .video_inputs = 4,
2574 /* .audio_inputs= 0, */
2575 .svhs = NO_SVHS,
2576 .gpiomask = 0x0f, /* old: 7 */
2577 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2578 .no_msp34xx = 1,
2579 .no_tda7432 = 1,
2580 .tuner_type = TUNER_ABSENT,
2581 .tuner_addr = ADDR_UNSET,
2582 },
2583 [BTTV_BOARD_MACHTV_MAGICTV] = {
2584 /* Julian Calaby <julian.calaby@gmail.com>
2585 * Slightly different from original MachTV definition (0x60)
2586
2587 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2588 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2589 * properly (methinks) causing no keyup bits being set */
2590
2591 .name = "MagicTV", /* rebranded MachTV */
2592 .video_inputs = 3,
2593 /* .audio_inputs= 1, */
2594 .svhs = 2,
2595 .gpiomask = 7,
2596 .muxsel = MUXSEL(2, 3, 1, 1),
2597 .gpiomux = { 0, 1, 2, 3 },
2598 .gpiomute = 4,
2599 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2600 .tuner_addr = ADDR_UNSET,
2601 .pll = PLL_28,
2602 .has_radio = 1,
2603 .has_remote = 1,
2604 },
2605 [BTTV_BOARD_SSAI_SECURITY] = {
2606 .name = "SSAI Security Video Interface",
2607 .video_inputs = 4,
2608 /* .audio_inputs= 0, */
2609 .svhs = NO_SVHS,
2610 .muxsel = MUXSEL(0, 1, 2, 3),
2611 .tuner_type = TUNER_ABSENT,
2612 .tuner_addr = ADDR_UNSET,
2613 },
2614 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2615 .name = "SSAI Ultrasound Video Interface",
2616 .video_inputs = 2,
2617 /* .audio_inputs= 0, */
2618 .svhs = 1,
2619 .muxsel = MUXSEL(2, 0, 1, 3),
2620 .tuner_type = TUNER_ABSENT,
2621 .tuner_addr = ADDR_UNSET,
2622 },
2623 /* ---- card 0x94---------------------------------- */
2624 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2625 .name = "DViCO FusionHDTV 2",
2626 .tuner_type = TUNER_PHILIPS_FCV1236D,
2627 .tuner_addr = ADDR_UNSET,
2628 .video_inputs = 3,
2629 /* .audio_inputs= 1, */
2630 .svhs = 2,
2631 .muxsel = MUXSEL(2, 3, 1),
2632 .gpiomask = 0x00e00007,
2633 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2634 .gpiomute = 0x00c00007,
2635 .no_msp34xx = 1,
2636 .no_tda7432 = 1,
2637 },
2638 /* ---- card 0x95---------------------------------- */
2639 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2640 .name = "Typhoon TV-Tuner PCI (50684)",
2641 .video_inputs = 3,
2642 /* .audio_inputs= 1, */
2643 .svhs = 2,
2644 .gpiomask = 0x3014f,
2645 .muxsel = MUXSEL(2, 3, 1, 1),
2646 .gpiomux = { 0x20001,0x10001, 0, 0 },
2647 .gpiomute = 10,
2648 .pll = PLL_28,
2649 .tuner_type = TUNER_PHILIPS_PAL_I,
2650 .tuner_addr = ADDR_UNSET,
2651 },
2652 [BTTV_BOARD_GEOVISION_GV600] = {
2653 /* emhn@usb.ve */
2654 .name = "Geovision GV-600",
2655 .video_inputs = 16,
2656 /* .audio_inputs= 0, */
2657 .svhs = NO_SVHS,
2658 .gpiomask = 0x0,
2659 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2660 .muxsel_hook = geovision_muxsel,
2661 .gpiomux = { 0 },
2662 .no_msp34xx = 1,
2663 .pll = PLL_28,
2664 .tuner_type = TUNER_ABSENT,
2665 .tuner_addr = ADDR_UNSET,
2666 },
2667 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2668 /* Mauro Lacy <mauro@lacy.com.ar>
2669 * Based on MagicTV and Conceptronic CONTVFMi */
2670
2671 .name = "Kozumi KTV-01C",
2672 .video_inputs = 3,
2673 /* .audio_inputs= 1, */
2674 .svhs = 2,
2675 .gpiomask = 0x008007,
2676 .muxsel = MUXSEL(2, 3, 1, 1),
2677 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2678 .gpiomute = 3, /* CONTVFMi */
2679 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2680 .tuner_addr = ADDR_UNSET,
2681 .pll = PLL_28,
2682 .has_radio = 1,
2683 .has_remote = 1,
2684 },
2685 [BTTV_BOARD_ENLTV_FM_2] = {
2686 /* Encore TV Tuner Pro ENL TV-FM-2
2687 Mauro Carvalho Chehab <mchehab@infradead.org */
2688 .name = "Encore ENL TV-FM-2",
2689 .video_inputs = 3,
2690 /* .audio_inputs= 1, */
2691 .svhs = 2,
2692 /* bit 6 -> IR disabled
2693 bit 18/17 = 00 -> mute
2694 01 -> enable external audio input
2695 10 -> internal audio input (mono?)
2696 11 -> internal audio input
2697 */
2698 .gpiomask = 0x060040,
2699 .muxsel = MUXSEL(2, 3, 3),
2700 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2701 .gpiomute = 0,
2702 .tuner_type = TUNER_TCL_MF02GIP_5N,
2703 .tuner_addr = ADDR_UNSET,
2704 .pll = PLL_28,
2705 .has_radio = 1,
2706 .has_remote = 1,
2707 },
2708 [BTTV_BOARD_VD012] = {
2709 /* D.Heer@Phytec.de */
2710 .name = "PHYTEC VD-012 (bt878)",
2711 .video_inputs = 4,
2712 /* .audio_inputs= 0, */
2713 .svhs = NO_SVHS,
2714 .gpiomask = 0x00,
2715 .muxsel = MUXSEL(0, 2, 3, 1),
2716 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2717 .pll = PLL_28,
2718 .tuner_type = TUNER_ABSENT,
2719 .tuner_addr = ADDR_UNSET,
2720 },
2721 [BTTV_BOARD_VD012_X1] = {
2722 /* D.Heer@Phytec.de */
2723 .name = "PHYTEC VD-012-X1 (bt878)",
2724 .video_inputs = 4,
2725 /* .audio_inputs= 0, */
2726 .svhs = 3,
2727 .gpiomask = 0x00,
2728 .muxsel = MUXSEL(2, 3, 1),
2729 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2730 .pll = PLL_28,
2731 .tuner_type = TUNER_ABSENT,
2732 .tuner_addr = ADDR_UNSET,
2733 },
2734 [BTTV_BOARD_VD012_X2] = {
2735 /* D.Heer@Phytec.de */
2736 .name = "PHYTEC VD-012-X2 (bt878)",
2737 .video_inputs = 4,
2738 /* .audio_inputs= 0, */
2739 .svhs = 3,
2740 .gpiomask = 0x00,
2741 .muxsel = MUXSEL(3, 2, 1),
2742 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2743 .pll = PLL_28,
2744 .tuner_type = TUNER_ABSENT,
2745 .tuner_addr = ADDR_UNSET,
2746 },
2747 [BTTV_BOARD_GEOVISION_GV800S] = {
2748 /* Bruno Christo <bchristo@inf.ufsm.br>
2749 *
2750 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2751 * 1 audio input per BT878A = 4 audio inputs
2752 * 4 video inputs per BT878A = 16 video inputs
2753 * This is the first BT878A chip of the GV-800(S). It's the
2754 * "master" chip and it controls the video inputs through an
2755 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2756 * slaves should use card type 0x9e (following this one).
2757 * There is a EEPROM on the card which is currently not handled.
2758 * The audio input is not working yet.
2759 */
2760 .name = "Geovision GV-800(S) (master)",
2761 .video_inputs = 4,
2762 /* .audio_inputs= 1, */
2763 .tuner_type = TUNER_ABSENT,
2764 .tuner_addr = ADDR_UNSET,
2765 .svhs = NO_SVHS,
2766 .gpiomask = 0xf107f,
2767 .no_gpioirq = 1,
2768 .muxsel = MUXSEL(2, 2, 2, 2),
2769 .pll = PLL_28,
2770 .no_msp34xx = 1,
2771 .no_tda7432 = 1,
2772 .muxsel_hook = gv800s_muxsel,
2773 },
2774 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2775 /* Bruno Christo <bchristo@inf.ufsm.br>
2776 *
2777 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2778 * 1 audio input per BT878A = 4 audio inputs
2779 * 4 video inputs per BT878A = 16 video inputs
2780 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2781 * and should use this card type.
2782 * The audio input is not working yet.
2783 */
2784 .name = "Geovision GV-800(S) (slave)",
2785 .video_inputs = 4,
2786 /* .audio_inputs= 1, */
2787 .tuner_type = TUNER_ABSENT,
2788 .tuner_addr = ADDR_UNSET,
2789 .svhs = NO_SVHS,
2790 .gpiomask = 0x00,
2791 .no_gpioirq = 1,
2792 .muxsel = MUXSEL(2, 2, 2, 2),
2793 .pll = PLL_28,
2794 .no_msp34xx = 1,
2795 .no_tda7432 = 1,
2796 .muxsel_hook = gv800s_muxsel,
2797 },
2798 [BTTV_BOARD_PV183] = {
2799 .name = "ProVideo PV183", /* 0x9f */
2800 .video_inputs = 2,
2801 /* .audio_inputs= 0, */
2802 .svhs = NO_SVHS,
2803 .gpiomask = 0,
2804 .muxsel = MUXSEL(2, 3),
2805 .gpiomux = { 0 },
2806 .no_msp34xx = 1,
2807 .pll = PLL_28,
2808 .tuner_type = TUNER_ABSENT,
2809 .tuner_addr = ADDR_UNSET,
2810 },
2811 [BTTV_BOARD_TVT_TD3116] = {
2812 .name = "Tongwei Video Technology TD-3116",
2813 .video_inputs = 16,
2814 .gpiomask = 0xc00ff,
2815 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2816 .muxsel_hook = td3116_muxsel,
2817 .svhs = NO_SVHS,
2818 .pll = PLL_28,
2819 .tuner_type = TUNER_ABSENT,
2820 },
2821 [BTTV_BOARD_APOSONIC_WDVR] = {
2822 .name = "Aposonic W-DVR",
2823 .video_inputs = 4,
2824 .svhs = NO_SVHS,
2825 .muxsel = MUXSEL(2, 3, 1, 0),
2826 .tuner_type = TUNER_ABSENT,
2827 },
2828
2829 };
2830
2831 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2832
2833 /* ----------------------------------------------------------------------- */
2834
2835 static unsigned char eeprom_data[256];
2836
2837 /*
2838 * identify card
2839 */
2840 void bttv_idcard(struct bttv *btv)
2841 {
2842 unsigned int gpiobits;
2843 int i,type;
2844
2845 /* read PCI subsystem ID */
2846 btv->cardid = btv->c.pci->subsystem_device << 16;
2847 btv->cardid |= btv->c.pci->subsystem_vendor;
2848
2849 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2850 /* look for the card */
2851 for (type = -1, i = 0; cards[i].id != 0; i++)
2852 if (cards[i].id == btv->cardid)
2853 type = i;
2854
2855 if (type != -1) {
2856 /* found it */
2857 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2858 btv->c.nr, cards[type].name, cards[type].cardnr,
2859 btv->cardid & 0xffff,
2860 (btv->cardid >> 16) & 0xffff);
2861 btv->c.type = cards[type].cardnr;
2862 } else {
2863 /* 404 */
2864 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2865 btv->c.nr, btv->cardid & 0xffff,
2866 (btv->cardid >> 16) & 0xffff);
2867 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2868 }
2869 }
2870
2871 /* let the user override the autodetected type */
2872 if (card[btv->c.nr] < bttv_num_tvcards)
2873 btv->c.type=card[btv->c.nr];
2874
2875 /* print which card config we are using */
2876 pr_info("%d: using: %s [card=%d,%s]\n",
2877 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2878 card[btv->c.nr] < bttv_num_tvcards
2879 ? "insmod option" : "autodetected");
2880
2881 /* overwrite gpio stuff ?? */
2882 if (UNSET == audioall && UNSET == audiomux[0])
2883 return;
2884
2885 if (UNSET != audiomux[0]) {
2886 gpiobits = 0;
2887 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2888 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2889 gpiobits |= audiomux[i];
2890 }
2891 } else {
2892 gpiobits = audioall;
2893 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2894 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2895 }
2896 }
2897 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2898 pr_info("%d: gpio config override: mask=0x%x, mux=",
2899 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2900 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2901 pr_cont("%s0x%x",
2902 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2903 }
2904 pr_cont("\n");
2905 }
2906
2907 /*
2908 * (most) board specific initialisations goes here
2909 */
2910
2911 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2912 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2913 {
2914 int type = -1;
2915
2916 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2917 type = BTTV_BOARD_MODTEC_205;
2918 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2919 type = BTTV_BOARD_EURESYS_PICOLO;
2920 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2921 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2922
2923 if (-1 != type) {
2924 btv->c.type = type;
2925 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2926 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2927 }
2928 }
2929
2930 static void flyvideo_gpio(struct bttv *btv)
2931 {
2932 int gpio, has_remote, has_radio, is_capture_only;
2933 int is_lr90, has_tda9820_tda9821;
2934 int tuner_type = UNSET, ttype;
2935
2936 gpio_inout(0xffffff, 0);
2937 udelay(8); /* without this we would see the 0x1800 mask */
2938 gpio = gpio_read();
2939 /* FIXME: must restore OUR_EN ??? */
2940
2941 /* all cards provide GPIO info, some have an additional eeprom
2942 * LR50: GPIO coding can be found lower right CP1 .. CP9
2943 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2944 * GPIO14-12: n.c.
2945 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2946
2947 * lowest 3 bytes are remote control codes (no handshake needed)
2948 * xxxFFF: No remote control chip soldered
2949 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2950 * Note: Some bits are Audio_Mask !
2951 */
2952 ttype = (gpio & 0x0f0000) >> 16;
2953 switch (ttype) {
2954 case 0x0:
2955 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
2956 break;
2957 case 0x2:
2958 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
2959 break;
2960 case 0x4:
2961 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2962 break;
2963 case 0x6:
2964 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
2965 break;
2966 case 0xC:
2967 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2968 break;
2969 default:
2970 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
2971 break;
2972 }
2973
2974 has_remote = gpio & 0x800000;
2975 has_radio = gpio & 0x400000;
2976 /* unknown 0x200000;
2977 * unknown2 0x100000; */
2978 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
2979 has_tda9820_tda9821 = !(gpio & 0x004000);
2980 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2981 /*
2982 * gpio & 0x001000 output bit for audio routing */
2983
2984 if (is_capture_only)
2985 tuner_type = TUNER_ABSENT; /* No tuner present */
2986
2987 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2988 btv->c.nr, has_radio ? "yes" : "no",
2989 has_remote ? "yes" : "no", tuner_type, gpio);
2990 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2991 btv->c.nr, is_lr90 ? "yes" : "no",
2992 has_tda9820_tda9821 ? "yes" : "no",
2993 is_capture_only ? "yes" : "no");
2994
2995 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
2996 btv->tuner_type = tuner_type;
2997 btv->has_radio = has_radio;
2998
2999 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3000 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3001 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3002 if (has_tda9820_tda9821)
3003 btv->audio_mode_gpio = lt9415_audio;
3004 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3005 }
3006
3007 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3008 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3009 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3010 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3011
3012 static void miro_pinnacle_gpio(struct bttv *btv)
3013 {
3014 int id,msp,gpio;
3015 char *info;
3016
3017 gpio_inout(0xffffff, 0);
3018 gpio = gpio_read();
3019 id = ((gpio>>10) & 63) -1;
3020 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3021 if (id < 32) {
3022 btv->tuner_type = miro_tunermap[id];
3023 if (0 == (gpio & 0x20)) {
3024 btv->has_radio = 1;
3025 if (!miro_fmtuner[id]) {
3026 btv->has_matchbox = 1;
3027 btv->mbox_we = (1<<6);
3028 btv->mbox_most = (1<<7);
3029 btv->mbox_clk = (1<<8);
3030 btv->mbox_data = (1<<9);
3031 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3032 }
3033 } else {
3034 btv->has_radio = 0;
3035 }
3036 if (-1 != msp) {
3037 if (btv->c.type == BTTV_BOARD_MIRO)
3038 btv->c.type = BTTV_BOARD_MIROPRO;
3039 if (btv->c.type == BTTV_BOARD_PINNACLE)
3040 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3041 }
3042 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3043 btv->c.nr, id+1, btv->tuner_type,
3044 !btv->has_radio ? "no" :
3045 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3046 (-1 == msp) ? "no" : "yes");
3047 } else {
3048 /* new cards with microtune tuner */
3049 id = 63 - id;
3050 btv->has_radio = 0;
3051 switch (id) {
3052 case 1:
3053 info = "PAL / mono";
3054 btv->tda9887_conf = TDA9887_INTERCARRIER;
3055 break;
3056 case 2:
3057 info = "PAL+SECAM / stereo";
3058 btv->has_radio = 1;
3059 btv->tda9887_conf = TDA9887_QSS;
3060 break;
3061 case 3:
3062 info = "NTSC / stereo";
3063 btv->has_radio = 1;
3064 btv->tda9887_conf = TDA9887_QSS;
3065 break;
3066 case 4:
3067 info = "PAL+SECAM / mono";
3068 btv->tda9887_conf = TDA9887_QSS;
3069 break;
3070 case 5:
3071 info = "NTSC / mono";
3072 btv->tda9887_conf = TDA9887_INTERCARRIER;
3073 break;
3074 case 6:
3075 info = "NTSC / stereo";
3076 btv->tda9887_conf = TDA9887_INTERCARRIER;
3077 break;
3078 case 7:
3079 info = "PAL / stereo";
3080 btv->tda9887_conf = TDA9887_INTERCARRIER;
3081 break;
3082 default:
3083 info = "oops: unknown card";
3084 break;
3085 }
3086 if (-1 != msp)
3087 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3088 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3089 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3090 btv->tuner_type = TUNER_MT2032;
3091 }
3092 }
3093
3094 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3095 #define LM1882_SYNC_DRIVE 0x200000L
3096
3097 static void init_ids_eagle(struct bttv *btv)
3098 {
3099 gpio_inout(0xffffff,0xFFFF37);
3100 gpio_write(0x200020);
3101
3102 /* flash strobe inverter ?! */
3103 gpio_write(0x200024);
3104
3105 /* switch sync drive off */
3106 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3107
3108 /* set BT848 muxel to 2 */
3109 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3110 }
3111
3112 /* Muxsel helper for the IDS Eagle.
3113 * the eagles does not use the standard muxsel-bits but
3114 * has its own multiplexer */
3115 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3116 {
3117 gpio_bits(3, input & 3);
3118
3119 /* composite */
3120 /* set chroma ADC to sleep */
3121 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3122 /* set to composite video */
3123 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3124 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3125
3126 /* switch sync drive off */
3127 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3128 }
3129
3130 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3131 {
3132 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3133 gpio_write(masks[input%4]);
3134 }
3135
3136 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3137 alarms output
3138
3139 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3140 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3141
3142 IN - sensor inputs, INx - sensor inputs and TI XORed together
3143 O1,O2,O3 - alarm outputs (relays)
3144
3145 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3146
3147 */
3148
3149 static void init_lmlbt4x(struct bttv *btv)
3150 {
3151 pr_debug("LMLBT4x init\n");
3152 btwrite(0x000000, BT848_GPIO_REG_INP);
3153 gpio_inout(0xffffff, 0x0006C0);
3154 gpio_write(0x000000);
3155 }
3156
3157 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3158 {
3159 unsigned int inmux = input % 8;
3160 gpio_inout( 0xf, 0xf );
3161 gpio_bits( 0xf, inmux );
3162 }
3163
3164 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3165 {
3166 unsigned int inmux = input % 4;
3167 gpio_inout( 3<<9, 3<<9 );
3168 gpio_bits( 3<<9, inmux<<9 );
3169 }
3170
3171 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3172 {
3173 unsigned int inmux = input % 16;
3174 gpio_inout(0xf, 0xf);
3175 gpio_bits(0xf, inmux);
3176 }
3177
3178 /*
3179 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3180 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3181 * The muxes are controlled via a 74HC373 latch which is connected to
3182 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3183 * Q0 of the latch is connected to the Enable (~E) input of the first
3184 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3185 * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3186 */
3187
3188 static void td3116_latch_value(struct bttv *btv, u32 value)
3189 {
3190 gpio_bits((1<<18) | 0xff, value);
3191 gpio_bits((1<<18) | 0xff, (1<<18) | value);
3192 udelay(1);
3193 gpio_bits((1<<18) | 0xff, value);
3194 }
3195
3196 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3197 {
3198 u32 value;
3199 u32 highbit;
3200
3201 highbit = (input & 0x8) >> 3 ;
3202
3203 /* Disable outputs and set value in the mux */
3204 value = 0x11; /* Disable outputs */
3205 value |= ((input & 0x7) << 1) << (4 * highbit);
3206 td3116_latch_value(btv, value);
3207
3208 /* Enable the correct output */
3209 value &= ~0x11;
3210 value |= ((highbit ^ 0x1) << 4) | highbit;
3211 td3116_latch_value(btv, value);
3212 }
3213
3214 /* ----------------------------------------------------------------------- */
3215
3216 static void bttv_reset_audio(struct bttv *btv)
3217 {
3218 /*
3219 * BT878A has a audio-reset register.
3220 * 1. This register is an audio reset function but it is in
3221 * function-0 (video capture) address space.
3222 * 2. It is enough to do this once per power-up of the card.
3223 * 3. There is a typo in the Conexant doc -- it is not at
3224 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3225 * --//Shrikumar 030609
3226 */
3227 if (btv->id != 878)
3228 return;
3229
3230 if (bttv_debug)
3231 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3232 btwrite((1<<7), 0x058);
3233 udelay(10);
3234 btwrite( 0, 0x058);
3235 }
3236
3237 /* initialization part one -- before registering i2c bus */
3238 void bttv_init_card1(struct bttv *btv)
3239 {
3240 switch (btv->c.type) {
3241 case BTTV_BOARD_HAUPPAUGE:
3242 case BTTV_BOARD_HAUPPAUGE878:
3243 boot_msp34xx(btv,5);
3244 break;
3245 case BTTV_BOARD_VOODOOTV_200:
3246 case BTTV_BOARD_VOODOOTV_FM:
3247 boot_msp34xx(btv,20);
3248 break;
3249 case BTTV_BOARD_AVERMEDIA98:
3250 boot_msp34xx(btv,11);
3251 break;
3252 case BTTV_BOARD_HAUPPAUGEPVR:
3253 pvr_boot(btv);
3254 break;
3255 case BTTV_BOARD_TWINHAN_DST:
3256 case BTTV_BOARD_AVDVBT_771:
3257 case BTTV_BOARD_PINNACLESAT:
3258 btv->use_i2c_hw = 1;
3259 break;
3260 case BTTV_BOARD_ADLINK_RTV24:
3261 init_RTV24( btv );
3262 break;
3263
3264 }
3265 if (!bttv_tvcards[btv->c.type].has_dvb)
3266 bttv_reset_audio(btv);
3267 }
3268
3269 /* initialization part two -- after registering i2c bus */
3270 void bttv_init_card2(struct bttv *btv)
3271 {
3272 btv->tuner_type = UNSET;
3273
3274 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3275 bttv_readee(btv,eeprom_data,0xa0);
3276 identify_by_eeprom(btv,eeprom_data);
3277 }
3278
3279 switch (btv->c.type) {
3280 case BTTV_BOARD_MIRO:
3281 case BTTV_BOARD_MIROPRO:
3282 case BTTV_BOARD_PINNACLE:
3283 case BTTV_BOARD_PINNACLEPRO:
3284 /* miro/pinnacle */
3285 miro_pinnacle_gpio(btv);
3286 break;
3287 case BTTV_BOARD_FLYVIDEO_98:
3288 case BTTV_BOARD_MAXI:
3289 case BTTV_BOARD_LIFE_FLYKIT:
3290 case BTTV_BOARD_FLYVIDEO:
3291 case BTTV_BOARD_TYPHOON_TVIEW:
3292 case BTTV_BOARD_CHRONOS_VS2:
3293 case BTTV_BOARD_FLYVIDEO_98FM:
3294 case BTTV_BOARD_FLYVIDEO2000:
3295 case BTTV_BOARD_FLYVIDEO98EZ:
3296 case BTTV_BOARD_CONFERENCETV:
3297 case BTTV_BOARD_LIFETEC_9415:
3298 flyvideo_gpio(btv);
3299 break;
3300 case BTTV_BOARD_HAUPPAUGE:
3301 case BTTV_BOARD_HAUPPAUGE878:
3302 case BTTV_BOARD_HAUPPAUGEPVR:
3303 /* pick up some config infos from the eeprom */
3304 bttv_readee(btv,eeprom_data,0xa0);
3305 hauppauge_eeprom(btv);
3306 break;
3307 case BTTV_BOARD_AVERMEDIA98:
3308 case BTTV_BOARD_AVPHONE98:
3309 bttv_readee(btv,eeprom_data,0xa0);
3310 avermedia_eeprom(btv);
3311 break;
3312 case BTTV_BOARD_PXC200:
3313 init_PXC200(btv);
3314 break;
3315 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3316 picolo_tetra_init(btv);
3317 break;
3318 case BTTV_BOARD_VHX:
3319 btv->has_radio = 1;
3320 btv->has_matchbox = 1;
3321 btv->mbox_we = 0x20;
3322 btv->mbox_most = 0;
3323 btv->mbox_clk = 0x08;
3324 btv->mbox_data = 0x10;
3325 btv->mbox_mask = 0x38;
3326 break;
3327 case BTTV_BOARD_VOBIS_BOOSTAR:
3328 case BTTV_BOARD_TERRATV:
3329 terratec_active_radio_upgrade(btv);
3330 break;
3331 case BTTV_BOARD_MAGICTVIEW061:
3332 if (btv->cardid == 0x3002144f) {
3333 btv->has_radio=1;
3334 pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3335 btv->c.nr);
3336 }
3337 break;
3338 case BTTV_BOARD_STB2:
3339 if (btv->cardid == 0x3060121a) {
3340 /* Fix up entry for 3DFX VoodooTV 100,
3341 which is an OEM STB card variant. */
3342 btv->has_radio=0;
3343 btv->tuner_type=TUNER_TEMIC_NTSC;
3344 }
3345 break;
3346 case BTTV_BOARD_OSPREY1x0:
3347 case BTTV_BOARD_OSPREY1x0_848:
3348 case BTTV_BOARD_OSPREY101_848:
3349 case BTTV_BOARD_OSPREY1x1:
3350 case BTTV_BOARD_OSPREY1x1_SVID:
3351 case BTTV_BOARD_OSPREY2xx:
3352 case BTTV_BOARD_OSPREY2x0_SVID:
3353 case BTTV_BOARD_OSPREY2x0:
3354 case BTTV_BOARD_OSPREY440:
3355 case BTTV_BOARD_OSPREY500:
3356 case BTTV_BOARD_OSPREY540:
3357 case BTTV_BOARD_OSPREY2000:
3358 bttv_readee(btv,eeprom_data,0xa0);
3359 osprey_eeprom(btv, eeprom_data);
3360 break;
3361 case BTTV_BOARD_IDS_EAGLE:
3362 init_ids_eagle(btv);
3363 break;
3364 case BTTV_BOARD_MODTEC_205:
3365 bttv_readee(btv,eeprom_data,0xa0);
3366 modtec_eeprom(btv);
3367 break;
3368 case BTTV_BOARD_LMLBT4:
3369 init_lmlbt4x(btv);
3370 break;
3371 case BTTV_BOARD_TIBET_CS16:
3372 tibetCS16_init(btv);
3373 break;
3374 case BTTV_BOARD_KODICOM_4400R:
3375 kodicom4400r_init(btv);
3376 break;
3377 case BTTV_BOARD_GEOVISION_GV800S:
3378 gv800s_init(btv);
3379 break;
3380 }
3381
3382 /* pll configuration */
3383 if (!(btv->id==848 && btv->revision==0x11)) {
3384 /* defaults from card list */
3385 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3386 btv->pll.pll_ifreq=28636363;
3387 btv->pll.pll_crystal=BT848_IFORM_XT0;
3388 }
3389 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3390 btv->pll.pll_ifreq=35468950;
3391 btv->pll.pll_crystal=BT848_IFORM_XT1;
3392 }
3393 /* insmod options can override */
3394 switch (pll[btv->c.nr]) {
3395 case 0: /* none */
3396 btv->pll.pll_crystal = 0;
3397 btv->pll.pll_ifreq = 0;
3398 btv->pll.pll_ofreq = 0;
3399 break;
3400 case 1: /* 28 MHz */
3401 case 28:
3402 btv->pll.pll_ifreq = 28636363;
3403 btv->pll.pll_ofreq = 0;
3404 btv->pll.pll_crystal = BT848_IFORM_XT0;
3405 break;
3406 case 2: /* 35 MHz */
3407 case 35:
3408 btv->pll.pll_ifreq = 35468950;
3409 btv->pll.pll_ofreq = 0;
3410 btv->pll.pll_crystal = BT848_IFORM_XT1;
3411 break;
3412 }
3413 }
3414 btv->pll.pll_current = -1;
3415
3416 /* tuner configuration (from card list / autodetect / insmod option) */
3417 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3418 if (UNSET == btv->tuner_type)
3419 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3420 if (UNSET != tuner[btv->c.nr])
3421 btv->tuner_type = tuner[btv->c.nr];
3422
3423 if (btv->tuner_type == TUNER_ABSENT)
3424 pr_info("%d: tuner absent\n", btv->c.nr);
3425 else if (btv->tuner_type == UNSET)
3426 pr_warn("%d: tuner type unset\n", btv->c.nr);
3427 else
3428 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3429
3430 if (autoload != UNSET) {
3431 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3432 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3433 btv->c.nr);
3434 }
3435
3436 if (UNSET == btv->tuner_type)
3437 btv->tuner_type = TUNER_ABSENT;
3438
3439 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3440 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3441 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3442 UNSET : bttv_tvcards[btv->c.type].svhs;
3443 if (svhs[btv->c.nr] != UNSET)
3444 btv->svhs = svhs[btv->c.nr];
3445 if (remote[btv->c.nr] != UNSET)
3446 btv->has_remote = remote[btv->c.nr];
3447
3448 if (bttv_tvcards[btv->c.type].has_radio)
3449 btv->has_radio = 1;
3450 if (bttv_tvcards[btv->c.type].has_remote)
3451 btv->has_remote = 1;
3452 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3453 btv->gpioirq = 1;
3454 if (bttv_tvcards[btv->c.type].volume_gpio)
3455 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3456 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3457 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3458
3459 if (btv->tuner_type == TUNER_ABSENT)
3460 return; /* no tuner or related drivers to load */
3461
3462 if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3463 /* Probe for RDS receiver chip */
3464 static const unsigned short addrs[] = {
3465 0x20 >> 1,
3466 0x22 >> 1,
3467 I2C_CLIENT_END
3468 };
3469 struct v4l2_subdev *sd;
3470
3471 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3472 &btv->c.i2c_adap, "saa6588", 0, addrs);
3473 btv->has_saa6588 = (sd != NULL);
3474 }
3475
3476 /* try to detect audio/fader chips */
3477
3478 /* First check if the user specified the audio chip via a module
3479 option. */
3480
3481 switch (audiodev[btv->c.nr]) {
3482 case -1:
3483 return; /* do not load any audio module */
3484
3485 case 0: /* autodetect */
3486 break;
3487
3488 case 1: {
3489 /* The user specified that we should probe for msp3400 */
3490 static const unsigned short addrs[] = {
3491 I2C_ADDR_MSP3400 >> 1,
3492 I2C_ADDR_MSP3400_ALT >> 1,
3493 I2C_CLIENT_END
3494 };
3495
3496 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3497 &btv->c.i2c_adap, "msp3400", 0, addrs);
3498 if (btv->sd_msp34xx)
3499 return;
3500 goto no_audio;
3501 }
3502
3503 case 2: {
3504 /* The user specified that we should probe for tda7432 */
3505 static const unsigned short addrs[] = {
3506 I2C_ADDR_TDA7432 >> 1,
3507 I2C_CLIENT_END
3508 };
3509
3510 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3511 &btv->c.i2c_adap, "tda7432", 0, addrs))
3512 return;
3513 goto no_audio;
3514 }
3515
3516 case 3: {
3517 /* The user specified that we should probe for tvaudio */
3518 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3519 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3520 if (btv->sd_tvaudio)
3521 return;
3522 goto no_audio;
3523 }
3524
3525 default:
3526 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3527 return;
3528 }
3529
3530 /* There were no overrides, so now we try to discover this through the
3531 card definition */
3532
3533 /* probe for msp3400 first: this driver can detect whether or not
3534 it really is a msp3400, so it will return NULL when the device
3535 found is really something else (e.g. a tea6300). */
3536 if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3537 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3538 &btv->c.i2c_adap, "msp3400",
3539 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3540 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3541 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3542 &btv->c.i2c_adap, "msp3400",
3543 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3544 }
3545
3546 /* If we found a msp34xx, then we're done. */
3547 if (btv->sd_msp34xx)
3548 return;
3549
3550 /* it might also be a tda7432. */
3551 if (!bttv_tvcards[btv->c.type].no_tda7432) {
3552 static const unsigned short addrs[] = {
3553 I2C_ADDR_TDA7432 >> 1,
3554 I2C_CLIENT_END
3555 };
3556
3557 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3558 &btv->c.i2c_adap, "tda7432", 0, addrs))
3559 return;
3560 }
3561
3562 /* Now see if we can find one of the tvaudio devices. */
3563 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3564 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3565 if (btv->sd_tvaudio)
3566 return;
3567
3568 no_audio:
3569 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3570 }
3571
3572
3573 /* initialize the tuner */
3574 void bttv_init_tuner(struct bttv *btv)
3575 {
3576 int addr = ADDR_UNSET;
3577
3578 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3579 addr = bttv_tvcards[btv->c.type].tuner_addr;
3580
3581 if (btv->tuner_type != TUNER_ABSENT) {
3582 struct tuner_setup tun_setup;
3583
3584 /* Load tuner module before issuing tuner config call! */
3585 if (btv->has_radio)
3586 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3587 &btv->c.i2c_adap, "tuner",
3588 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3589 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3590 &btv->c.i2c_adap, "tuner",
3591 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3592 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3593 &btv->c.i2c_adap, "tuner",
3594 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3595
3596 tun_setup.mode_mask = T_ANALOG_TV;
3597 tun_setup.type = btv->tuner_type;
3598 tun_setup.addr = addr;
3599
3600 if (btv->has_radio)
3601 tun_setup.mode_mask |= T_RADIO;
3602
3603 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3604 }
3605
3606 if (btv->tda9887_conf) {
3607 struct v4l2_priv_tun_config tda9887_cfg;
3608
3609 tda9887_cfg.tuner = TUNER_TDA9887;
3610 tda9887_cfg.priv = &btv->tda9887_conf;
3611
3612 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3613 }
3614 }
3615
3616 /* ----------------------------------------------------------------------- */
3617
3618 static void modtec_eeprom(struct bttv *btv)
3619 {
3620 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3621 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3622 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3623 btv->c.nr, &eeprom_data[0x1e]);
3624 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3625 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3626 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3627 btv->c.nr, &eeprom_data[0x1e]);
3628 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3629 btv->tuner_type=TUNER_PHILIPS_NTSC;
3630 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3631 btv->c.nr, &eeprom_data[0x1e]);
3632 } else {
3633 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3634 btv->c.nr, &eeprom_data[0x1e]);
3635 }
3636 }
3637
3638 static void hauppauge_eeprom(struct bttv *btv)
3639 {
3640 struct tveeprom tv;
3641
3642 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3643 btv->tuner_type = tv.tuner_type;
3644 btv->has_radio = tv.has_radio;
3645
3646 pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3647 btv->c.nr, tv.model);
3648
3649 /*
3650 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3651 * type based on model #.
3652 */
3653 if(tv.model == 64900) {
3654 pr_info("%d: Switching board type from %s to %s\n",
3655 btv->c.nr,
3656 bttv_tvcards[btv->c.type].name,
3657 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3658 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3659 }
3660
3661 /* The 61334 needs the msp3410 to do the radio demod to get sound */
3662 if (tv.model == 61334)
3663 btv->radio_uses_msp_demodulator = 1;
3664 }
3665
3666 static int terratec_active_radio_upgrade(struct bttv *btv)
3667 {
3668 int freq;
3669
3670 btv->has_radio = 1;
3671 btv->has_matchbox = 1;
3672 btv->mbox_we = 0x10;
3673 btv->mbox_most = 0x20;
3674 btv->mbox_clk = 0x08;
3675 btv->mbox_data = 0x04;
3676 btv->mbox_mask = 0x3c;
3677
3678 btv->mbox_iow = 1 << 8;
3679 btv->mbox_ior = 1 << 9;
3680 btv->mbox_csel = 1 << 10;
3681
3682 freq=88000/62.5;
3683 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3684 if (0x1ed8 == tea5757_read(btv)) {
3685 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3686 btv->has_radio = 1;
3687 btv->has_saa6588 = 1;
3688 btv->has_matchbox = 1;
3689 } else {
3690 btv->has_radio = 0;
3691 btv->has_matchbox = 0;
3692 }
3693 return 0;
3694 }
3695
3696
3697 /* ----------------------------------------------------------------------- */
3698
3699 /*
3700 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3701 *
3702 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3703 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3704 * unpacked with unzip).
3705 */
3706 #define PVR_GPIO_DELAY 10
3707
3708 #define BTTV_ALT_DATA 0x000001
3709 #define BTTV_ALT_DCLK 0x100000
3710 #define BTTV_ALT_NCONFIG 0x800000
3711
3712 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3713 {
3714 u32 n;
3715 u8 bits;
3716 int i;
3717
3718 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3719 gpio_write(0);
3720 udelay(PVR_GPIO_DELAY);
3721
3722 gpio_write(BTTV_ALT_NCONFIG);
3723 udelay(PVR_GPIO_DELAY);
3724
3725 for (n = 0; n < microlen; n++) {
3726 bits = micro[n];
3727 for (i = 0 ; i < 8 ; i++) {
3728 gpio_bits(BTTV_ALT_DCLK,0);
3729 if (bits & 0x01)
3730 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3731 else
3732 gpio_bits(BTTV_ALT_DATA,0);
3733 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3734 bits >>= 1;
3735 }
3736 }
3737 gpio_bits(BTTV_ALT_DCLK,0);
3738 udelay(PVR_GPIO_DELAY);
3739
3740 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3741 for (i = 0 ; i < 30 ; i++) {
3742 gpio_bits(BTTV_ALT_DCLK,0);
3743 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3744 }
3745 gpio_bits(BTTV_ALT_DCLK,0);
3746 return 0;
3747 }
3748
3749 static int pvr_boot(struct bttv *btv)
3750 {
3751 const struct firmware *fw_entry;
3752 int rc;
3753
3754 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3755 if (rc != 0) {
3756 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3757 return rc;
3758 }
3759 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3760 pr_info("%d: altera firmware upload %s\n",
3761 btv->c.nr, (rc < 0) ? "failed" : "ok");
3762 release_firmware(fw_entry);
3763 return rc;
3764 }
3765
3766 /* ----------------------------------------------------------------------- */
3767 /* some osprey specific stuff */
3768
3769 static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3770 {
3771 int i;
3772 u32 serial = 0;
3773 int cardid = -1;
3774
3775 /* This code will nevery actually get called in this case.... */
3776 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3777 /* this might be an antique... check for MMAC label in eeprom */
3778 if (!strncmp(ee, "MMAC", 4)) {
3779 u8 checksum = 0;
3780 for (i = 0; i < 21; i++)
3781 checksum += ee[i];
3782 if (checksum != ee[21])
3783 return;
3784 cardid = BTTV_BOARD_OSPREY1x0_848;
3785 for (i = 12; i < 21; i++)
3786 serial *= 10, serial += ee[i] - '0';
3787 }
3788 } else {
3789 unsigned short type;
3790
3791 for (i = 4*16; i < 8*16; i += 16) {
3792 u16 checksum = ip_compute_csum(ee + i, 16);
3793
3794 if ((checksum&0xff) + (checksum>>8) == 0xff)
3795 break;
3796 }
3797 if (i >= 8*16)
3798 return;
3799 ee += i;
3800
3801 /* found a valid descriptor */
3802 type = get_unaligned_be16((__be16 *)(ee+4));
3803
3804 switch(type) {
3805 /* 848 based */
3806 case 0x0004:
3807 cardid = BTTV_BOARD_OSPREY1x0_848;
3808 break;
3809 case 0x0005:
3810 cardid = BTTV_BOARD_OSPREY101_848;
3811 break;
3812
3813 /* 878 based */
3814 case 0x0012:
3815 case 0x0013:
3816 cardid = BTTV_BOARD_OSPREY1x0;
3817 break;
3818 case 0x0014:
3819 case 0x0015:
3820 cardid = BTTV_BOARD_OSPREY1x1;
3821 break;
3822 case 0x0016:
3823 case 0x0017:
3824 case 0x0020:
3825 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3826 break;
3827 case 0x0018:
3828 case 0x0019:
3829 case 0x001E:
3830 case 0x001F:
3831 cardid = BTTV_BOARD_OSPREY2xx;
3832 break;
3833 case 0x001A:
3834 case 0x001B:
3835 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3836 break;
3837 case 0x0040:
3838 cardid = BTTV_BOARD_OSPREY500;
3839 break;
3840 case 0x0050:
3841 case 0x0056:
3842 cardid = BTTV_BOARD_OSPREY540;
3843 /* bttv_osprey_540_init(btv); */
3844 break;
3845 case 0x0060:
3846 case 0x0070:
3847 case 0x00A0:
3848 cardid = BTTV_BOARD_OSPREY2x0;
3849 /* enable output on select control lines */
3850 gpio_inout(0xffffff,0x000303);
3851 break;
3852 case 0x00D8:
3853 cardid = BTTV_BOARD_OSPREY440;
3854 break;
3855 default:
3856 /* unknown...leave generic, but get serial # */
3857 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
3858 btv->c.nr, type);
3859 break;
3860 }
3861 serial = get_unaligned_be32((__be32 *)(ee+6));
3862 }
3863
3864 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
3865 btv->c.nr, cardid,
3866 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3867
3868 if (cardid<0 || btv->c.type == cardid)
3869 return;
3870
3871 /* card type isn't set correctly */
3872 if (card[btv->c.nr] < bttv_num_tvcards) {
3873 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
3874 btv->c.nr);
3875 } else {
3876 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
3877 btv->c.nr, btv->c.type, cardid);
3878 btv->c.type = cardid;
3879 }
3880 }
3881
3882 /* ----------------------------------------------------------------------- */
3883 /* AVermedia specific stuff, from bktr_card.c */
3884
3885 static int tuner_0_table[] = {
3886 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3887 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3888 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3889 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3890 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3891 TUNER_PHILIPS_FM1216ME_MK3 };
3892
3893 static int tuner_1_table[] = {
3894 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3895 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3896 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3897 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3898 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3899
3900 static void avermedia_eeprom(struct bttv *btv)
3901 {
3902 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3903
3904 tuner_make = (eeprom_data[0x41] & 0x7);
3905 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3906 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3907 btv->has_remote = (eeprom_data[0x42] & 0x01);
3908
3909 if (tuner_make == 0 || tuner_make == 2)
3910 if (tuner_format <= 0x0a)
3911 tuner_type = tuner_0_table[tuner_format];
3912 if (tuner_make == 1)
3913 if (tuner_format <= 9)
3914 tuner_type = tuner_1_table[tuner_format];
3915
3916 if (tuner_make == 4)
3917 if (tuner_format == 0x09)
3918 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3919
3920 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3921 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3922 if (tuner_type) {
3923 btv->tuner_type = tuner_type;
3924 pr_cont("%d", tuner_type);
3925 } else
3926 pr_cont("Unknown type");
3927 pr_cont(" radio:%s remote control:%s\n",
3928 tuner_tv_fm ? "yes" : "no",
3929 btv->has_remote ? "yes" : "no");
3930 }
3931
3932 /*
3933 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3934 * analog demod, which is not I2C controlled like the newer and more common
3935 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3936 * that control the IF for the video and audio. Apparently, bttv GPIO
3937 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3938 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3939 */
3940 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3941 {
3942
3943 if (btv->audio == TVAUDIO_INPUT_TUNER) {
3944 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3945 gpiobits |= 0x10000;
3946 else
3947 gpiobits &= ~0x10000;
3948 }
3949
3950 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3951 return gpiobits;
3952 }
3953
3954
3955 /*
3956 * reset/enable the MSP on some Hauppauge cards
3957 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3958 *
3959 * Hauppauge: pin 5
3960 * Voodoo: pin 20
3961 */
3962 static void boot_msp34xx(struct bttv *btv, int pin)
3963 {
3964 int mask = (1 << pin);
3965
3966 gpio_inout(mask,mask);
3967 gpio_bits(mask,0);
3968 mdelay(2);
3969 udelay(500);
3970 gpio_bits(mask,mask);
3971
3972 if (bttv_gpio)
3973 bttv_gpio_tracking(btv,"msp34xx");
3974 if (bttv_verbose)
3975 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
3976 btv->c.nr, pin);
3977 }
3978
3979 /* ----------------------------------------------------------------------- */
3980 /* Imagenation L-Model PXC200 Framegrabber */
3981 /* This is basically the same procedure as
3982 * used by Alessandro Rubini in his pxc200
3983 * driver, but using BTTV functions */
3984
3985 static void init_PXC200(struct bttv *btv)
3986 {
3987 static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
3988 0x03, 0x04, 0x05, 0x06, 0x00 };
3989 unsigned int i;
3990 int tmp;
3991 u32 val;
3992
3993 /* Initialise GPIO-connevted stuff */
3994 gpio_inout(0xffffff, (1<<13));
3995 gpio_write(0);
3996 udelay(3);
3997 gpio_write(1<<13);
3998 /* GPIO inputs are pulled up, so no need to drive
3999 * reset pin any longer */
4000 gpio_bits(0xffffff, 0);
4001 if (bttv_gpio)
4002 bttv_gpio_tracking(btv,"pxc200");
4003
4004 /* we could/should try and reset/control the AD pots? but
4005 right now we simply turned off the crushing. Without
4006 this the AGC drifts drifts
4007 remember the EN is reverse logic -->
4008 setting BT848_ADC_AGC_EN disable the AGC
4009 tboult@eecs.lehigh.edu
4010 */
4011
4012 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4013
4014 /* Initialise MAX517 DAC */
4015 pr_info("Setting DAC reference voltage level ...\n");
4016 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4017
4018 /* Initialise 12C508 PIC */
4019 /* The I2CWrite and I2CRead commmands are actually to the
4020 * same chips - but the R/W bit is included in the address
4021 * argument so the numbers are different */
4022
4023
4024 pr_info("Initialising 12C508 PIC chip ...\n");
4025
4026 /* First of all, enable the clock line. This is used in the PXC200-F */
4027 val = btread(BT848_GPIO_DMA_CTL);
4028 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4029 btwrite(val, BT848_GPIO_DMA_CTL);
4030
4031 /* Then, push to 0 the reset pin long enough to reset the *
4032 * device same as above for the reset line, but not the same
4033 * value sent to the GPIO-connected stuff
4034 * which one is the good one? */
4035 gpio_inout(0xffffff,(1<<2));
4036 gpio_write(0);
4037 udelay(10);
4038 gpio_write(1<<2);
4039
4040 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4041 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4042 if (tmp != -1) {
4043 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4044 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4045 }
4046 }
4047
4048 pr_info("PXC200 Initialised\n");
4049 }
4050
4051
4052
4053 /* ----------------------------------------------------------------------- */
4054 /*
4055 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4056 * it. This apparently involves the following procedure for each 878 chip:
4057 *
4058 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4059 *
4060 * 2) write to GPIO_DATA
4061 * - 0x0E
4062 * - sleep 1ms
4063 * - 0x10 + 0x0E
4064 * - sleep 10ms
4065 * - 0x0E
4066 * read from GPIO_DATA into buf (uint_32)
4067 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4068 * error. ERROR_CPLD_Check_Failed stop.
4069 *
4070 * 3) write to GPIO_DATA
4071 * - write 0x4400 + 0x0E
4072 * - sleep 10ms
4073 * - write 0x4410 + 0x0E
4074 * - sleep 1ms
4075 * - write 0x0E
4076 * read from GPIO_DATA into buf (uint_32)
4077 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4078 * error. ERROR_CPLD_Check_Failed.
4079 */
4080 /* ----------------------------------------------------------------------- */
4081 static void
4082 init_RTV24 (struct bttv *btv)
4083 {
4084 uint32_t dataRead = 0;
4085 long watchdog_value = 0x0E;
4086
4087 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4088 btv->c.nr);
4089
4090 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4091
4092 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4093 msleep (1);
4094 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4095 msleep (10);
4096 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4097
4098 dataRead = btread (BT848_GPIO_DATA);
4099
4100 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4101 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4102 btv->c.nr, dataRead);
4103 }
4104
4105 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4106 msleep (10);
4107 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4108 msleep (1);
4109 btwrite (watchdog_value, BT848_GPIO_DATA);
4110 msleep (1);
4111 dataRead = btread (BT848_GPIO_DATA);
4112
4113 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4114 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4115 btv->c.nr, dataRead);
4116
4117 return;
4118 }
4119
4120 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4121 }
4122
4123
4124
4125 /* ----------------------------------------------------------------------- */
4126 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4127 /*
4128 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4129 * This code is placed under the terms of the GNU General Public License
4130 *
4131 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4132 */
4133
4134 static void bus_low(struct bttv *btv, int bit)
4135 {
4136 if (btv->mbox_ior) {
4137 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4138 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4139 udelay(5);
4140 }
4141
4142 gpio_bits(bit,0);
4143 udelay(5);
4144
4145 if (btv->mbox_ior) {
4146 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4147 udelay(5);
4148 }
4149 }
4150
4151 static void bus_high(struct bttv *btv, int bit)
4152 {
4153 if (btv->mbox_ior) {
4154 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4155 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4156 udelay(5);
4157 }
4158
4159 gpio_bits(bit,bit);
4160 udelay(5);
4161
4162 if (btv->mbox_ior) {
4163 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4164 udelay(5);
4165 }
4166 }
4167
4168 static int bus_in(struct bttv *btv, int bit)
4169 {
4170 if (btv->mbox_ior) {
4171 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4172 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4173 udelay(5);
4174
4175 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4176 udelay(5);
4177 }
4178 return gpio_read() & (bit);
4179 }
4180
4181 /* TEA5757 register bits */
4182 #define TEA_FREQ 0:14
4183 #define TEA_BUFFER 15:15
4184
4185 #define TEA_SIGNAL_STRENGTH 16:17
4186
4187 #define TEA_PORT1 18:18
4188 #define TEA_PORT0 19:19
4189
4190 #define TEA_BAND 20:21
4191 #define TEA_BAND_FM 0
4192 #define TEA_BAND_MW 1
4193 #define TEA_BAND_LW 2
4194 #define TEA_BAND_SW 3
4195
4196 #define TEA_MONO 22:22
4197 #define TEA_ALLOW_STEREO 0
4198 #define TEA_FORCE_MONO 1
4199
4200 #define TEA_SEARCH_DIRECTION 23:23
4201 #define TEA_SEARCH_DOWN 0
4202 #define TEA_SEARCH_UP 1
4203
4204 #define TEA_STATUS 24:24
4205 #define TEA_STATUS_TUNED 0
4206 #define TEA_STATUS_SEARCHING 1
4207
4208 /* Low-level stuff */
4209 static int tea5757_read(struct bttv *btv)
4210 {
4211 unsigned long timeout;
4212 int value = 0;
4213 int i;
4214
4215 /* better safe than sorry */
4216 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4217
4218 if (btv->mbox_ior) {
4219 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4220 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4221 udelay(5);
4222 }
4223
4224 if (bttv_gpio)
4225 bttv_gpio_tracking(btv,"tea5757 read");
4226
4227 bus_low(btv,btv->mbox_we);
4228 bus_low(btv,btv->mbox_clk);
4229
4230 udelay(10);
4231 timeout= jiffies + msecs_to_jiffies(1000);
4232
4233 /* wait for DATA line to go low; error if it doesn't */
4234 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4235 schedule();
4236 if (bus_in(btv,btv->mbox_data)) {
4237 pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
4238 return -1;
4239 }
4240
4241 dprintk("%d: tea5757:", btv->c.nr);
4242 for (i = 0; i < 24; i++) {
4243 udelay(5);
4244 bus_high(btv,btv->mbox_clk);
4245 udelay(5);
4246 dprintk_cont("%c",
4247 bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
4248 bus_low(btv,btv->mbox_clk);
4249 value <<= 1;
4250 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4251 dprintk_cont("%c",
4252 bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
4253 }
4254 dprintk_cont("\n");
4255 dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
4256 return value;
4257 }
4258
4259 static int tea5757_write(struct bttv *btv, int value)
4260 {
4261 int i;
4262 int reg = value;
4263
4264 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4265
4266 if (btv->mbox_ior) {
4267 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4268 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4269 udelay(5);
4270 }
4271 if (bttv_gpio)
4272 bttv_gpio_tracking(btv,"tea5757 write");
4273
4274 dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
4275 bus_low(btv,btv->mbox_clk);
4276 bus_high(btv,btv->mbox_we);
4277 for (i = 0; i < 25; i++) {
4278 if (reg & 0x1000000)
4279 bus_high(btv,btv->mbox_data);
4280 else
4281 bus_low(btv,btv->mbox_data);
4282 reg <<= 1;
4283 bus_high(btv,btv->mbox_clk);
4284 udelay(10);
4285 bus_low(btv,btv->mbox_clk);
4286 udelay(10);
4287 }
4288 bus_low(btv,btv->mbox_we); /* unmute !!! */
4289 return 0;
4290 }
4291
4292 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4293 {
4294 dprintk("tea5757_set_freq %d\n",freq);
4295 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4296 }
4297
4298 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4299 *
4300 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4301 * switch instead (CD22M3494E). This IC can have multiple active connections
4302 * between Xn (input) and Yn (output) pins. We need to clear any existing
4303 * connection prior to establish a new one, pulsing the STROBE pin.
4304 *
4305 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4306 * GPIO pins are wired as:
4307 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4308 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4309 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4310 * GPIO[8] - - P3[5] (microcontroller)
4311 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4312 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4313 * GPINTR - - P3[4] (microcontroller)
4314 *
4315 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4316 * configuration either directly (as we are doing) or using the microcontroller
4317 * which is also wired to I2C interface. I have no further info on the
4318 * microcontroller features, one would need to disassembly the firmware.
4319 * note: the vendor refused to give any information on this product, all
4320 * that stuff was found using a multimeter! :)
4321 */
4322 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4323 {
4324 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4325 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4326
4327 gpio_bits(0x07f, muxgpio[input]);
4328
4329 /* reset all conections */
4330 gpio_bits(0x200,0x200);
4331 mdelay(1);
4332 gpio_bits(0x200,0x000);
4333 mdelay(1);
4334
4335 /* create a new connection */
4336 gpio_bits(0x480,0x480);
4337 mdelay(1);
4338 gpio_bits(0x480,0x080);
4339 mdelay(1);
4340 }
4341
4342 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4343 *
4344 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4345 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4346 * chips, ten eight input analog multiplexors, a not chip and a few
4347 * other components.
4348 *
4349 * 16 inputs on a secondary bracket are provided and can be selected
4350 * from each of the four capture chips. Two of the eight input
4351 * multiplexors are used to select from any of the 16 input signals.
4352 *
4353 * Unsupported hardware capabilities:
4354 * . A video output monitor on the secondary bracket can be selected from
4355 * one of the 878A chips.
4356 * . Another passthrough but I haven't spent any time investigating it.
4357 * . Digital I/O (logic level connected to GPIO) is available from an
4358 * onboard header.
4359 *
4360 * The on chip input mux should always be set to 2.
4361 * GPIO[16:19] - Video input selection
4362 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4363 * GPIO[?:?] - Digital I/O.
4364 *
4365 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4366 * determined what function (if any) it provides. With the microcontroller
4367 * and sync separator chips a guess is that it might have to do with video
4368 * switching and maybe some digital I/O.
4369 */
4370 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4371 {
4372 /* video mux */
4373 gpio_bits(0x0f0000, input << 16);
4374 }
4375
4376 static void tibetCS16_init(struct bttv *btv)
4377 {
4378 /* enable gpio bits, mask obtained via btSpy */
4379 gpio_inout(0xffffff, 0x0f7fff);
4380 gpio_write(0x0f7fff);
4381 }
4382
4383 /*
4384 * The following routines for the Kodicom-4400r get a little mind-twisting.
4385 * There is a "master" controller and three "slave" controllers, together
4386 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4387 * The analog switch is controlled by the "master", but the detection order
4388 * of the four BT878A chips is in an order which I just don't understand.
4389 * The "master" is actually the second controller to be detected. The
4390 * logic on the board uses logical numbers for the 4 controllers, but
4391 * those numbers are different from the detection sequence. When working
4392 * with the analog switch, we need to "map" from the detection sequence
4393 * over to the board's logical controller number. This mapping sequence
4394 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4395 * unit 3, the second (which is the master) is logical unit 0, etc.
4396 * We need to maintain the status of the analog switch (which of the 16
4397 * cameras is connected to which of the 4 controllers). Rather than
4398 * add to the bttv structure for this, we use the data reserved for
4399 * the mbox (unused for this card type).
4400 */
4401
4402 /*
4403 * First a routine to set the analog switch, which controls which camera
4404 * is routed to which controller. The switch comprises an X-address
4405 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4406 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4407 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4408 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4409 * specified address. The idea is to set the address and data, then bring
4410 * STROBE high, and finally bring STROBE back to low.
4411 */
4412 static void kodicom4400r_write(struct bttv *btv,
4413 unsigned char xaddr,
4414 unsigned char yaddr,
4415 unsigned char data) {
4416 unsigned int udata;
4417
4418 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4419 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4420 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4421 gpio_bits(0x1ff, udata); /* strobe low */
4422 }
4423
4424 /*
4425 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4426 * use this routine. The routine finds the "master" for the card, maps
4427 * the controller number from the detected position over to the logical
4428 * number, writes the appropriate data to the analog switch, and housekeeps
4429 * the local copy of the switch information. The parameter 'input' is the
4430 * requested camera number (0 - 15).
4431 */
4432 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4433 {
4434 char *sw_status;
4435 int xaddr, yaddr;
4436 struct bttv *mctlr;
4437 static unsigned char map[4] = {3, 0, 2, 1};
4438
4439 mctlr = master[btv->c.nr];
4440 if (mctlr == NULL) { /* ignore if master not yet detected */
4441 return;
4442 }
4443 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4444 yaddr = map[yaddr];
4445 sw_status = (char *)(&mctlr->mbox_we);
4446 xaddr = input & 0xf;
4447 /* Check if the controller/camera pair has changed, else ignore */
4448 if (sw_status[yaddr] != xaddr)
4449 {
4450 /* "open" the old switch, "close" the new one, save the new */
4451 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4452 sw_status[yaddr] = xaddr;
4453 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4454 }
4455 }
4456
4457 /*
4458 * During initialisation, we need to reset the analog switch. We
4459 * also preset the switch to map the 4 connectors on the card to the
4460 * *user's* (see above description of kodicom4400r_muxsel) channels
4461 * 0 through 3
4462 */
4463 static void kodicom4400r_init(struct bttv *btv)
4464 {
4465 char *sw_status = (char *)(&btv->mbox_we);
4466 int ix;
4467
4468 gpio_inout(0x0003ff, 0x0003ff);
4469 gpio_write(1 << 9); /* reset MUX */
4470 gpio_write(0);
4471 /* Preset camera 0 to the 4 controllers */
4472 for (ix = 0; ix < 4; ix++) {
4473 sw_status[ix] = ix;
4474 kodicom4400r_write(btv, ix, ix, 1);
4475 }
4476 /*
4477 * Since this is the "master", we need to set up the
4478 * other three controller chips' pointers to this structure
4479 * for later use in the muxsel routine.
4480 */
4481 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4482 return;
4483 master[btv->c.nr-1] = btv;
4484 master[btv->c.nr] = btv;
4485 master[btv->c.nr+1] = btv;
4486 master[btv->c.nr+2] = btv;
4487 }
4488
4489 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4490 * video multiplexers to provide up to 16 video inputs. These
4491 * multiplexers are controlled by the lower 8 GPIO pins of the
4492 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4493
4494 * xxx0 is pin xxx of multiplexer U5,
4495 * yyy1 is pin yyy of multiplexer U2
4496 */
4497 #define ENA0 0x01
4498 #define ENB0 0x02
4499 #define ENA1 0x04
4500 #define ENB1 0x08
4501
4502 #define IN10 0x10
4503 #define IN00 0x20
4504 #define IN11 0x40
4505 #define IN01 0x80
4506
4507 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4508 {
4509 static const int masks[] = {
4510 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4511 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4512 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4513 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4514 };
4515 gpio_write(masks[input%16]);
4516 }
4517 static void picolo_tetra_init(struct bttv *btv)
4518 {
4519 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4520 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4521 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4522 }
4523 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4524 {
4525
4526 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
4527 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4528 /*GPIO[20]&GPIO[21] used to choose the right input*/
4529 btwrite (input<<20,BT848_GPIO_DATA);
4530
4531 }
4532
4533 /*
4534 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4535 *
4536 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4537 * swichers to provide 16 channels to MUX0. The TDA8540's have
4538 * 4 independent outputs and as such the IVC120G also has the
4539 * optional "Monitor Out" bus. This allows the card to be looking
4540 * at one input while the monitor is looking at another.
4541 *
4542 * Since I've couldn't be bothered figuring out how to add an
4543 * independent muxsel for the monitor bus, I've just set it to
4544 * whatever the card is looking at.
4545 *
4546 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4547 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4548 *
4549 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4550 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4551 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4552 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4553 *
4554 */
4555
4556 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4557 #define I2C_TDA8540 0x90
4558 #define I2C_TDA8540_ALT1 0x92
4559 #define I2C_TDA8540_ALT2 0x94
4560 #define I2C_TDA8540_ALT3 0x96
4561 #define I2C_TDA8540_ALT4 0x98
4562 #define I2C_TDA8540_ALT5 0x9a
4563 #define I2C_TDA8540_ALT6 0x9c
4564
4565 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4566 {
4567 /* Simple maths */
4568 int key = input % 4;
4569 int matrix = input / 4;
4570
4571 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4572 btv->c.nr, input, matrix, key);
4573
4574 /* Handles the input selection on the TDA8540's */
4575 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4576 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4577 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4578 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4579 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4580 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4581 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4582 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4583
4584 /* Handles the output enables on the TDA8540's */
4585 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4586 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4587 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4588 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4589 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4590 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4591 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4592 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4593
4594 /* 878's MUX0 is already selected for input via muxsel values */
4595 }
4596
4597
4598 /* PXC200 muxsel helper
4599 * luke@syseng.anu.edu.au
4600 * another transplant
4601 * from Alessandro Rubini (rubini@linux.it)
4602 *
4603 * There are 4 kinds of cards:
4604 * PXC200L which is bt848
4605 * PXC200F which is bt848 with PIC controlling mux
4606 * PXC200AL which is bt878
4607 * PXC200AF which is bt878 with PIC controlling mux
4608 */
4609 #define PX_CFG_PXC200F 0x01
4610 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4611 #define PX_I2C_PIC 0x0f
4612 #define PX_PXC200A_CARDID 0x200a1295
4613 #define PX_I2C_CMD_CFG 0x00
4614
4615 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4616 {
4617 int rc;
4618 long mux;
4619 int bitmask;
4620 unsigned char buf[2];
4621
4622 /* Read PIC config to determine if this is a PXC200F */
4623 /* PX_I2C_CMD_CFG*/
4624 buf[0]=0;
4625 buf[1]=0;
4626 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4627 if (rc) {
4628 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4629 btv->c.nr, rc);
4630 /* not PXC ? do nothing */
4631 return;
4632 }
4633
4634 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4635 if (!(rc & PX_CFG_PXC200F)) {
4636 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4637 btv->c.nr, rc);
4638 return;
4639 }
4640
4641
4642 /* The multiplexer in the 200F is handled by the GPIO port */
4643 /* get correct mapping between inputs */
4644 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4645 /* ** not needed!? */
4646 mux = input;
4647
4648 /* make sure output pins are enabled */
4649 /* bitmask=0x30f; */
4650 bitmask=0x302;
4651 /* check whether we have a PXC200A */
4652 if (btv->cardid == PX_PXC200A_CARDID) {
4653 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4654 bitmask |= 7<<4; /* the DAC */
4655 }
4656 btwrite(bitmask, BT848_GPIO_OUT_EN);
4657
4658 bitmask = btread(BT848_GPIO_DATA);
4659 if (btv->cardid == PX_PXC200A_CARDID)
4660 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4661 else /* older device */
4662 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4663 btwrite(bitmask,BT848_GPIO_DATA);
4664
4665 /*
4666 * Was "to be safe, set the bt848 to input 0"
4667 * Actually, since it's ok at load time, better not messing
4668 * with these bits (on PXC200AF you need to set mux 2 here)
4669 *
4670 * needed because bttv-driver sets mux before calling this function
4671 */
4672 if (btv->cardid == PX_PXC200A_CARDID)
4673 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4674 else /* older device */
4675 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4676
4677 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4678 }
4679
4680 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4681 {
4682 unsigned int mux = input % 4;
4683
4684 if (input == btv->svhs)
4685 mux = 0;
4686
4687 gpio_bits(0x3, mux);
4688 }
4689
4690 /*
4691 * GeoVision GV-800(S) functions
4692 * Bruno Christo <bchristo@inf.ufsm.br>
4693 */
4694
4695 /* This is a function to control the analog switch, which determines which
4696 * camera is routed to which controller. The switch comprises an X-address
4697 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4698 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4699 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4700 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4701 * specified address. There is also a chip select (gpio bit 16).
4702 * The idea is to set the address and chip select together, bring
4703 * STROBE high, write the data, and finally bring STROBE back to low.
4704 */
4705 static void gv800s_write(struct bttv *btv,
4706 unsigned char xaddr,
4707 unsigned char yaddr,
4708 unsigned char data) {
4709 /* On the "master" 878A:
4710 * GPIO bits 0-9 are used for the analog switch:
4711 * 00 - 03: camera selector
4712 * 04 - 06: 878A (controller) selector
4713 * 16: cselect
4714 * 17: strobe
4715 * 18: data (1->on, 0->off)
4716 * 19: reset
4717 */
4718 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4719 const u32 CSELECT = 1<<16;
4720 const u32 STROBE = 1<<17;
4721 const u32 DATA = data<<18;
4722
4723 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4724 gpio_bits(0x20000, STROBE); /* STROBE high */
4725 gpio_bits(0x40000, DATA); /* write DATA */
4726 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4727 }
4728
4729 /*
4730 * GeoVision GV-800(S) muxsel
4731 *
4732 * Each of the 4 cards (controllers) use this function.
4733 * The controller using this function selects the input through the GPIO pins
4734 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4735 *
4736 * The parameter 'input' is the requested camera number (0-4) on the controller.
4737 * The map array has the address of each input. Note that the addresses in the
4738 * array are in the sequence the original GeoVision driver uses, that is, set
4739 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4740 * the physical "camera 1" connector corresponds to controller 0 input 0,
4741 * "camera 2" corresponds to controller 1 input 0, and so on.
4742 *
4743 * After getting the input address, the function then writes the appropriate
4744 * data to the analog switch, and housekeeps the local copy of the switch
4745 * information.
4746 */
4747 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4748 {
4749 struct bttv *mctlr;
4750 char *sw_status;
4751 int xaddr, yaddr;
4752 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4753 { 0x1, 0x5, 0xb, 0x7 },
4754 { 0x2, 0x8, 0xc, 0xe },
4755 { 0x3, 0x9, 0xd, 0xf } };
4756 input = input%4;
4757 mctlr = master[btv->c.nr];
4758 if (mctlr == NULL) {
4759 /* do nothing until the "master" is detected */
4760 return;
4761 }
4762 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4763 sw_status = (char *)(&mctlr->mbox_we);
4764 xaddr = map[yaddr][input] & 0xf;
4765
4766 /* Check if the controller/camera pair has changed, ignore otherwise */
4767 if (sw_status[yaddr] != xaddr) {
4768 /* disable the old switch, enable the new one and save status */
4769 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4770 sw_status[yaddr] = xaddr;
4771 gv800s_write(mctlr, xaddr, yaddr, 1);
4772 }
4773 }
4774
4775 /* GeoVision GV-800(S) "master" chip init */
4776 static void gv800s_init(struct bttv *btv)
4777 {
4778 char *sw_status = (char *)(&btv->mbox_we);
4779 int ix;
4780
4781 gpio_inout(0xf107f, 0xf107f);
4782 gpio_write(1<<19); /* reset the analog MUX */
4783 gpio_write(0);
4784
4785 /* Preset camera 0 to the 4 controllers */
4786 for (ix = 0; ix < 4; ix++) {
4787 sw_status[ix] = ix;
4788 gv800s_write(btv, ix, ix, 1);
4789 }
4790
4791 /* Inputs on the "master" controller need this brightness fix */
4792 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4793
4794 if (btv->c.nr > BTTV_MAX-4)
4795 return;
4796 /*
4797 * Store the "master" controller pointer in the master
4798 * array for later use in the muxsel function.
4799 */
4800 master[btv->c.nr] = btv;
4801 master[btv->c.nr+1] = btv;
4802 master[btv->c.nr+2] = btv;
4803 master[btv->c.nr+3] = btv;
4804 }
4805
4806 /* ----------------------------------------------------------------------- */
4807 /* motherboard chipset specific stuff */
4808
4809 void __init bttv_check_chipset(void)
4810 {
4811 int pcipci_fail = 0;
4812 struct pci_dev *dev = NULL;
4813
4814 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4815 pcipci_fail = 1;
4816 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4817 triton1 = 1;
4818 if (pci_pci_problems & PCIPCI_VSFX)
4819 vsfx = 1;
4820 #ifdef PCIPCI_ALIMAGIK
4821 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4822 latency = 0x0A;
4823 #endif
4824
4825
4826 /* print warnings about any quirks found */
4827 if (triton1)
4828 pr_info("Host bridge needs ETBF enabled\n");
4829 if (vsfx)
4830 pr_info("Host bridge needs VSFX enabled\n");
4831 if (pcipci_fail) {
4832 pr_info("bttv and your chipset may not work together\n");
4833 if (!no_overlay) {
4834 pr_info("overlay will be disabled\n");
4835 no_overlay = 1;
4836 } else {
4837 pr_info("overlay forced. Use this option at your own risk.\n");
4838 }
4839 }
4840 if (UNSET != latency)
4841 pr_info("pci latency fixup [%d]\n", latency);
4842 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4843 PCI_DEVICE_ID_INTEL_82441, dev))) {
4844 unsigned char b;
4845 pci_read_config_byte(dev, 0x53, &b);
4846 if (bttv_debug)
4847 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4848 b);
4849 }
4850 }
4851
4852 int bttv_handle_chipset(struct bttv *btv)
4853 {
4854 unsigned char command;
4855
4856 if (!triton1 && !vsfx && UNSET == latency)
4857 return 0;
4858
4859 if (bttv_verbose) {
4860 if (triton1)
4861 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4862 btv->c.nr);
4863 if (vsfx && btv->id >= 878)
4864 pr_info("%d: enabling VSFX\n", btv->c.nr);
4865 if (UNSET != latency)
4866 pr_info("%d: setting pci timer to %d\n",
4867 btv->c.nr, latency);
4868 }
4869
4870 if (btv->id < 878) {
4871 /* bt848 (mis)uses a bit in the irq mask for etbf */
4872 if (triton1)
4873 btv->triton1 = BT848_INT_ETBF;
4874 } else {
4875 /* bt878 has a bit in the pci config space for it */
4876 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4877 if (triton1)
4878 command |= BT878_EN_TBFX;
4879 if (vsfx)
4880 command |= BT878_EN_VSFX;
4881 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4882 }
4883 if (UNSET != latency)
4884 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4885 return 0;
4886 }
4887
4888
4889 /*
4890 * Local variables:
4891 * c-basic-offset: 8
4892 * End:
4893 */
Linux kernel - Deliverables
This page took 0.217804 seconds and 5 git commands to generate.