drivers/media/platform/davinci/dm355_ccdc.c

   1 /*
   2  * Copyright (C) 2005-2009 Texas Instruments Inc
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  17  *
  18  * CCDC hardware module for DM355
  19  * ------------------------------
  20  *
  21  * This module is for configuring DM355 CCD controller of VPFE to capture
  22  * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
  23  * such as Defect Pixel Correction, Color Space Conversion etc to
  24  * pre-process the Bayer RGB data, before writing it to SDRAM. This
  25  * module also allows application to configure individual
  26  * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
  27  * To do so, application include dm355_ccdc.h and vpfe_capture.h header
  28  * files. The setparams() API is called by vpfe_capture driver
  29  * to configure module parameters
  30  *
  31  * TODO: 1) Raw bayer parameter settings and bayer capture
  32  *       2) Split module parameter structure to module specific ioctl structs
  33  *       3) add support for lense shading correction
  34  *       4) investigate if enum used for user space type definition
  35  *          to be replaced by #defines or integer
  36  */
  37 #include <linux/platform_device.h>
  38 #include <linux/uaccess.h>
  39 #include <linux/videodev2.h>
  40 #include <linux/clk.h>
  41 #include <linux/err.h>
  42 #include <linux/module.h>
  43
  44 #include <media/davinci/dm355_ccdc.h>
  45 #include <media/davinci/vpss.h>
  46
  47 #include "dm355_ccdc_regs.h"
  48 #include "ccdc_hw_device.h"
  49
  50 MODULE_LICENSE("GPL");
  51 MODULE_DESCRIPTION("CCDC Driver for DM355");
  52 MODULE_AUTHOR("Texas Instruments");
  53
  54 static struct ccdc_oper_config {
  55         struct device *dev;
  56         /* CCDC interface type */
  57         enum vpfe_hw_if_type if_type;
  58         /* Raw Bayer configuration */
  59         struct ccdc_params_raw bayer;
  60         /* YCbCr configuration */
  61         struct ccdc_params_ycbcr ycbcr;
  62         /* Master clock */
  63         struct clk *mclk;
  64         /* slave clock */
  65         struct clk *sclk;
  66         /* ccdc base address */
  67         void __iomem *base_addr;
  68 } ccdc_cfg = {
  69         /* Raw configurations */
  70         .bayer = {
  71                 .pix_fmt = CCDC_PIXFMT_RAW,
  72                 .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
  73                 .win = CCDC_WIN_VGA,
  74                 .fid_pol = VPFE_PINPOL_POSITIVE,
  75                 .vd_pol = VPFE_PINPOL_POSITIVE,
  76                 .hd_pol = VPFE_PINPOL_POSITIVE,
  77                 .gain = {
  78                         .r_ye = 256,
  79                         .gb_g = 256,
  80                         .gr_cy = 256,
  81                         .b_mg = 256
  82                 },
  83                 .config_params = {
  84                         .datasft = 2,
  85                         .mfilt1 = CCDC_NO_MEDIAN_FILTER1,
  86                         .mfilt2 = CCDC_NO_MEDIAN_FILTER2,
  87                         .alaw = {
  88                                 .gama_wd = 2,
  89                         },
  90                         .blk_clamp = {
  91                                 .sample_pixel = 1,
  92                                 .dc_sub = 25
  93                         },
  94                         .col_pat_field0 = {
  95                                 .olop = CCDC_GREEN_BLUE,
  96                                 .olep = CCDC_BLUE,
  97                                 .elop = CCDC_RED,
  98                                 .elep = CCDC_GREEN_RED
  99                         },
 100                         .col_pat_field1 = {
 101                                 .olop = CCDC_GREEN_BLUE,
 102                                 .olep = CCDC_BLUE,
 103                                 .elop = CCDC_RED,
 104                                 .elep = CCDC_GREEN_RED
 105                         },
 106                 },
 107         },
 108         /* YCbCr configuration */
 109         .ycbcr = {
 110                 .win = CCDC_WIN_PAL,
 111                 .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
 112                 .frm_fmt = CCDC_FRMFMT_INTERLACED,
 113                 .fid_pol = VPFE_PINPOL_POSITIVE,
 114                 .vd_pol = VPFE_PINPOL_POSITIVE,
 115                 .hd_pol = VPFE_PINPOL_POSITIVE,
 116                 .bt656_enable = 1,
 117                 .pix_order = CCDC_PIXORDER_CBYCRY,
 118                 .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
 119         },
 120 };
 121
 122
 123 /* Raw Bayer formats */
 124 static u32 ccdc_raw_bayer_pix_formats[] =
 125                 {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
 126
 127 /* Raw YUV formats */
 128 static u32 ccdc_raw_yuv_pix_formats[] =
 129                 {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
 130
 131 /* register access routines */
 132 static inline u32 regr(u32 offset)
 133 {
 134         return __raw_readl(ccdc_cfg.base_addr + offset);
 135 }
 136
 137 static inline void regw(u32 val, u32 offset)
 138 {
 139         __raw_writel(val, ccdc_cfg.base_addr + offset);
 140 }
 141
 142 static void ccdc_enable(int en)
 143 {
 144         unsigned int temp;
 145         temp = regr(SYNCEN);
 146         temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
 147         temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
 148         regw(temp, SYNCEN);
 149 }
 150
 151 static void ccdc_enable_output_to_sdram(int en)
 152 {
 153         unsigned int temp;
 154         temp = regr(SYNCEN);
 155         temp &= (~(CCDC_SYNCEN_WEN_MASK));
 156         temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
 157         regw(temp, SYNCEN);
 158 }
 159
 160 static void ccdc_config_gain_offset(void)
 161 {
 162         /* configure gain */
 163         regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
 164         regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
 165         regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
 166         regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
 167         /* configure offset */
 168         regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
 169 }
 170
 171 /*
 172  * ccdc_restore_defaults()
 173  * This function restore power on defaults in the ccdc registers
 174  */
 175 static int ccdc_restore_defaults(void)
 176 {
 177         int i;
 178
 179         dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
 180         /* set all registers to zero */
 181         for (i = 0; i <= CCDC_REG_LAST; i += 4)
 182                 regw(0, i);
 183
 184         /* now override the values with power on defaults in registers */
 185         regw(MODESET_DEFAULT, MODESET);
 186         /* no culling support */
 187         regw(CULH_DEFAULT, CULH);
 188         regw(CULV_DEFAULT, CULV);
 189         /* Set default Gain and Offset */
 190         ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
 191         ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
 192         ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
 193         ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
 194         ccdc_config_gain_offset();
 195         regw(OUTCLIP_DEFAULT, OUTCLIP);
 196         regw(LSCCFG2_DEFAULT, LSCCFG2);
 197         /* select ccdc input */
 198         if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
 199                 dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
 200                 return -EFAULT;
 201         }
 202         /* select ccdc clock */
 203         if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
 204                 dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
 205                 return -EFAULT;
 206         }
 207         dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
 208         return 0;
 209 }
 210
 211 static int ccdc_open(struct device *device)
 212 {
 213         return ccdc_restore_defaults();
 214 }
 215
 216 static int ccdc_close(struct device *device)
 217 {
 218         /* disable clock */
 219         vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
 220         /* do nothing for now */
 221         return 0;
 222 }
 223 /*
 224  * ccdc_setwin()
 225  * This function will configure the window size to
 226  * be capture in CCDC reg.
 227  */
 228 static void ccdc_setwin(struct v4l2_rect *image_win,
 229                         enum ccdc_frmfmt frm_fmt, int ppc)
 230 {
 231         int horz_start, horz_nr_pixels;
 232         int vert_start, vert_nr_lines;
 233         int mid_img = 0;
 234
 235         dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
 236
 237         /*
 238          * ppc - per pixel count. indicates how many pixels per cell
 239          * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
 240          * raw capture this is 1
 241          */
 242         horz_start = image_win->left << (ppc - 1);
 243         horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
 244
 245         /* Writing the horizontal info into the registers */
 246         regw(horz_start, SPH);
 247         regw(horz_nr_pixels, NPH);
 248         vert_start = image_win->top;
 249
 250         if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
 251                 vert_nr_lines = (image_win->height >> 1) - 1;
 252                 vert_start >>= 1;
 253                 /* Since first line doesn't have any data */
 254                 vert_start += 1;
 255                 /* configure VDINT0 and VDINT1 */
 256                 regw(vert_start, VDINT0);
 257         } else {
 258                 /* Since first line doesn't have any data */
 259                 vert_start += 1;
 260                 vert_nr_lines = image_win->height - 1;
 261                 /* configure VDINT0 and VDINT1 */
 262                 mid_img = vert_start + (image_win->height / 2);
 263                 regw(vert_start, VDINT0);
 264                 regw(mid_img, VDINT1);
 265         }
 266         regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
 267         regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
 268         regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
 269         dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
 270 }
 271
 272 static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
 273 {
 274         if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT ||
 275             ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) {
 276                 dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n");
 277                 return -EINVAL;
 278         }
 279
 280         if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 ||
 281             ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) {
 282                 dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n");
 283                 return -EINVAL;
 284         }
 285
 286         if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 ||
 287             ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) {
 288                 dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n");
 289                 return -EINVAL;
 290         }
 291
 292         if ((ccdcparam->med_filt_thres < 0) ||
 293            (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
 294                 dev_dbg(ccdc_cfg.dev,
 295                         "Invalid value of median filter threshold\n");
 296                 return -EINVAL;
 297         }
 298
 299         if (ccdcparam->data_sz < CCDC_DATA_16BITS ||
 300             ccdcparam->data_sz > CCDC_DATA_8BITS) {
 301                 dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n");
 302                 return -EINVAL;
 303         }
 304
 305         if (ccdcparam->alaw.enable) {
 306                 if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 ||
 307                     ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) {
 308                         dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n");
 309                         return -EINVAL;
 310                 }
 311         }
 312
 313         if (ccdcparam->blk_clamp.b_clamp_enable) {
 314                 if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS ||
 315                     ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) {
 316                         dev_dbg(ccdc_cfg.dev,
 317                                 "Invalid value of sample pixel\n");
 318                         return -EINVAL;
 319                 }
 320                 if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES ||
 321                     ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) {
 322                         dev_dbg(ccdc_cfg.dev,
 323                                 "Invalid value of sample lines\n");
 324                         return -EINVAL;
 325                 }
 326         }
 327         return 0;
 328 }
 329
 330 /* Parameter operations */
 331 static int ccdc_set_params(void __user *params)
 332 {
 333         struct ccdc_config_params_raw ccdc_raw_params;
 334         int x;
 335
 336         /* only raw module parameters can be set through the IOCTL */
 337         if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
 338                 return -EINVAL;
 339
 340         x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
 341         if (x) {
 342                 dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc"
 343                         "params, %d\n", x);
 344                 return -EFAULT;
 345         }
 346
 347         if (!validate_ccdc_param(&ccdc_raw_params)) {
 348                 memcpy(&ccdc_cfg.bayer.config_params,
 349                         &ccdc_raw_params,
 350                         sizeof(ccdc_raw_params));
 351                 return 0;
 352         }
 353         return -EINVAL;
 354 }
 355
 356 /* This function will configure CCDC for YCbCr video capture */
 357 static void ccdc_config_ycbcr(void)
 358 {
 359         struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
 360         u32 temp;
 361
 362         /* first set the CCDC power on defaults values in all registers */
 363         dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
 364         ccdc_restore_defaults();
 365
 366         /* configure pixel format & video frame format */
 367         temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
 368                 CCDC_INPUT_MODE_SHIFT) |
 369                 ((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
 370                 CCDC_FRM_FMT_SHIFT));
 371
 372         /* setup BT.656 sync mode */
 373         if (params->bt656_enable) {
 374                 regw(CCDC_REC656IF_BT656_EN, REC656IF);
 375                 /*
 376                  * configure the FID, VD, HD pin polarity fld,hd pol positive,
 377                  * vd negative, 8-bit pack mode
 378                  */
 379                 temp |= CCDC_VD_POL_NEGATIVE;
 380         } else {                /* y/c external sync mode */
 381                 temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
 382                         CCDC_FID_POL_SHIFT) |
 383                         ((params->hd_pol & CCDC_HD_POL_MASK) <<
 384                         CCDC_HD_POL_SHIFT) |
 385                         ((params->vd_pol & CCDC_VD_POL_MASK) <<
 386                         CCDC_VD_POL_SHIFT));
 387         }
 388
 389         /* pack the data to 8-bit */
 390         temp |= CCDC_DATA_PACK_ENABLE;
 391
 392         regw(temp, MODESET);
 393
 394         /* configure video window */
 395         ccdc_setwin(&params->win, params->frm_fmt, 2);
 396
 397         /* configure the order of y cb cr in SD-RAM */
 398         temp = (params->pix_order << CCDC_Y8POS_SHIFT);
 399         temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
 400         regw(temp, CCDCFG);
 401
 402         /*
 403          * configure the horizontal line offset. This is done by rounding up
 404          * width to a multiple of 16 pixels and multiply by two to account for
 405          * y:cb:cr 4:2:2 data
 406          */
 407         regw(((params->win.width * 2 + 31) >> 5), HSIZE);
 408
 409         /* configure the memory line offset */
 410         if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
 411                 /* two fields are interleaved in memory */
 412                 regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
 413         }
 414
 415         dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
 416 }
 417
 418 /*
 419  * ccdc_config_black_clamp()
 420  * configure parameters for Optical Black Clamp
 421  */
 422 static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
 423 {
 424         u32 val;
 425
 426         if (!bclamp->b_clamp_enable) {
 427                 /* configure DCSub */
 428                 regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
 429                 regw(0x0000, CLAMP);
 430                 return;
 431         }
 432         /* Enable the Black clamping, set sample lines and pixels */
 433         val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
 434               ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
 435                 CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
 436         regw(val, CLAMP);
 437
 438         /* If Black clamping is enable then make dcsub 0 */
 439         val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
 440                         << CCDC_NUM_LINE_CALC_SHIFT;
 441         regw(val, DCSUB);
 442 }
 443
 444 /*
 445  * ccdc_config_black_compense()
 446  * configure parameters for Black Compensation
 447  */
 448 static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
 449 {
 450         u32 val;
 451
 452         val = (bcomp->b & CCDC_BLK_COMP_MASK) |
 453                 ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
 454                 CCDC_BLK_COMP_GB_COMP_SHIFT);
 455         regw(val, BLKCMP1);
 456
 457         val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
 458                 CCDC_BLK_COMP_GR_COMP_SHIFT) |
 459                 ((bcomp->r & CCDC_BLK_COMP_MASK) <<
 460                 CCDC_BLK_COMP_R_COMP_SHIFT);
 461         regw(val, BLKCMP0);
 462 }
 463
 464 /*
 465  * ccdc_write_dfc_entry()
 466  * write an entry in the dfc table.
 467  */
 468 int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
 469 {
 470 /* TODO This is to be re-visited and adjusted */
 471 #define DFC_WRITE_WAIT_COUNT    1000
 472         u32 val, count = DFC_WRITE_WAIT_COUNT;
 473
 474         regw(dfc->dft_corr_vert[index], DFCMEM0);
 475         regw(dfc->dft_corr_horz[index], DFCMEM1);
 476         regw(dfc->dft_corr_sub1[index], DFCMEM2);
 477         regw(dfc->dft_corr_sub2[index], DFCMEM3);
 478         regw(dfc->dft_corr_sub3[index], DFCMEM4);
 479         /* set WR bit to write */
 480         val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
 481         regw(val, DFCMEMCTL);
 482
 483         /*
 484          * Assume, it is very short. If we get an error, we need to
 485          * adjust this value
 486          */
 487         while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
 488                 count--;
 489         /*
 490          * TODO We expect the count to be non-zero to be successful. Adjust
 491          * the count if write requires more time
 492          */
 493
 494         if (count) {
 495                 dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
 496                 return -1;
 497         }
 498         return 0;
 499 }
 500
 501 /*
 502  * ccdc_config_vdfc()
 503  * configure parameters for Vertical Defect Correction
 504  */
 505 static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
 506 {
 507         u32 val;
 508         int i;
 509
 510         /* Configure General Defect Correction. The table used is from IPIPE */
 511         val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
 512
 513         /* Configure Vertical Defect Correction if needed */
 514         if (!dfc->ver_dft_en) {
 515                 /* Enable only General Defect Correction */
 516                 regw(val, DFCCTL);
 517                 return 0;
 518         }
 519
 520         if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
 521                 return -EINVAL;
 522
 523         val |= CCDC_DFCCTL_VDFC_DISABLE;
 524         val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
 525                 CCDC_DFCCTL_VDFCSL_SHIFT;
 526         val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
 527                 CCDC_DFCCTL_VDFCUDA_SHIFT;
 528         val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
 529                 CCDC_DFCCTL_VDFLSFT_SHIFT;
 530         regw(val , DFCCTL);
 531
 532         /* clear address ptr to offset 0 */
 533         val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
 534
 535         /* write defect table entries */
 536         for (i = 0; i < dfc->table_size; i++) {
 537                 /* increment address for non zero index */
 538                 if (i != 0)
 539                         val = CCDC_DFCMEMCTL_INC_ADDR;
 540                 regw(val, DFCMEMCTL);
 541                 if (ccdc_write_dfc_entry(i, dfc) < 0)
 542                         return -EFAULT;
 543         }
 544
 545         /* update saturation level and enable dfc */
 546         regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
 547         val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
 548                         CCDC_DFCCTL_VDFCEN_SHIFT);
 549         regw(val, DFCCTL);
 550         return 0;
 551 }
 552
 553 /*
 554  * ccdc_config_csc()
 555  * configure parameters for color space conversion
 556  * Each register CSCM0-7 has two values in S8Q5 format.
 557  */
 558 static void ccdc_config_csc(struct ccdc_csc *csc)
 559 {
 560         u32 val1, val2;
 561         int i;
 562
 563         if (!csc->enable)
 564                 return;
 565
 566         /* Enable the CSC sub-module */
 567         regw(CCDC_CSC_ENABLE, CSCCTL);
 568
 569         /* Converting the co-eff as per the format of the register */
 570         for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
 571                 if ((i % 2) == 0) {
 572                         /* CSCM - LSB */
 573                         val1 = (csc->coeff[i].integer &
 574                                 CCDC_CSC_COEF_INTEG_MASK)
 575                                 << CCDC_CSC_COEF_INTEG_SHIFT;
 576                         /*
 577                          * convert decimal part to binary. Use 2 decimal
 578                          * precision, user values range from .00 - 0.99
 579                          */
 580                         val1 |= (((csc->coeff[i].decimal &
 581                                 CCDC_CSC_COEF_DECIMAL_MASK) *
 582                                 CCDC_CSC_DEC_MAX) / 100);
 583                 } else {
 584
 585                         /* CSCM - MSB */
 586                         val2 = (csc->coeff[i].integer &
 587                                 CCDC_CSC_COEF_INTEG_MASK)
 588                                 << CCDC_CSC_COEF_INTEG_SHIFT;
 589                         val2 |= (((csc->coeff[i].decimal &
 590                                  CCDC_CSC_COEF_DECIMAL_MASK) *
 591                                  CCDC_CSC_DEC_MAX) / 100);
 592                         val2 <<= CCDC_CSCM_MSB_SHIFT;
 593                         val2 |= val1;
 594                         regw(val2, (CSCM0 + ((i - 1) << 1)));
 595                 }
 596         }
 597 }
 598
 599 /*
 600  * ccdc_config_color_patterns()
 601  * configure parameters for color patterns
 602  */
 603 static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
 604                                        struct ccdc_col_pat *pat1)
 605 {
 606         u32 val;
 607
 608         val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
 609                 (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
 610                 (pat1->elop << 12) | (pat1->elep << 14));
 611         regw(val, COLPTN);
 612 }
 613
 614 /* This function will configure CCDC for Raw mode image capture */
 615 static int ccdc_config_raw(void)
 616 {
 617         struct ccdc_params_raw *params = &ccdc_cfg.bayer;
 618         struct ccdc_config_params_raw *config_params =
 619                                         &ccdc_cfg.bayer.config_params;
 620         unsigned int val;
 621
 622         dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
 623
 624         /* restore power on defaults to register */
 625         ccdc_restore_defaults();
 626
 627         /* CCDCFG register:
 628          * set CCD Not to swap input since input is RAW data
 629          * set FID detection function to Latch at V-Sync
 630          * set WENLOG - ccdc valid area to AND
 631          * set TRGSEL to WENBIT
 632          * set EXTRG to DISABLE
 633          * disable latching function on VSYNC - shadowed registers
 634          */
 635         regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
 636              CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
 637              CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
 638
 639         /*
 640          * Set VDHD direction to input,  input type to raw input
 641          * normal data polarity, do not use external WEN
 642          */
 643         val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
 644                 CCDC_EXWEN_DISABLE);
 645
 646         /*
 647          * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
 648          * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
 649          * frame format(progressive or interlace), & pixel format (Input mode)
 650          */
 651         val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
 652                 ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
 653                 ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
 654                 ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
 655                 ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
 656
 657         /* set pack for alaw compression */
 658         if ((config_params->data_sz == CCDC_DATA_8BITS) ||
 659              config_params->alaw.enable)
 660                 val |= CCDC_DATA_PACK_ENABLE;
 661
 662         /* Configure for LPF */
 663         if (config_params->lpf_enable)
 664                 val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
 665                         CCDC_LPF_SHIFT;
 666
 667         /* Configure the data shift */
 668         val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
 669                 CCDC_DATASFT_SHIFT;
 670         regw(val , MODESET);
 671         dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
 672
 673         /* Configure the Median Filter threshold */
 674         regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
 675
 676         /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
 677         val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
 678                 CCDC_CFA_MOSAIC;
 679
 680         /* Enable and configure aLaw register if needed */
 681         if (config_params->alaw.enable) {
 682                 val |= (CCDC_ALAW_ENABLE |
 683                         ((config_params->alaw.gama_wd &
 684                         CCDC_ALAW_GAMA_WD_MASK) <<
 685                         CCDC_GAMMAWD_INPUT_SHIFT));
 686         }
 687
 688         /* Configure Median filter1 & filter2 */
 689         val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
 690                 (config_params->mfilt2 << CCDC_MFILT2_SHIFT));
 691
 692         regw(val, GAMMAWD);
 693         dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
 694
 695         /* configure video window */
 696         ccdc_setwin(&params->win, params->frm_fmt, 1);
 697
 698         /* Optical Clamp Averaging */
 699         ccdc_config_black_clamp(&config_params->blk_clamp);
 700
 701         /* Black level compensation */
 702         ccdc_config_black_compense(&config_params->blk_comp);
 703
 704         /* Vertical Defect Correction if needed */
 705         if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
 706                 return -EFAULT;
 707
 708         /* color space conversion */
 709         ccdc_config_csc(&config_params->csc);
 710
 711         /* color pattern */
 712         ccdc_config_color_patterns(&config_params->col_pat_field0,
 713                                    &config_params->col_pat_field1);
 714
 715         /* Configure the Gain  & offset control */
 716         ccdc_config_gain_offset();
 717
 718         dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
 719
 720         /* Configure DATAOFST  register */
 721         val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
 722                 CCDC_DATAOFST_H_SHIFT;
 723         val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
 724                 CCDC_DATAOFST_V_SHIFT;
 725         regw(val, DATAOFST);
 726
 727         /* configuring HSIZE register */
 728         val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
 729                 CCDC_HSIZE_FLIP_SHIFT;
 730
 731         /* If pack 8 is enable then 1 pixel will take 1 byte */
 732         if ((config_params->data_sz == CCDC_DATA_8BITS) ||
 733              config_params->alaw.enable) {
 734                 val |= (((params->win.width) + 31) >> 5) &
 735                         CCDC_HSIZE_VAL_MASK;
 736
 737                 /* adjust to multiple of 32 */
 738                 dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
 739                        (((params->win.width) + 31) >> 5) &
 740                         CCDC_HSIZE_VAL_MASK);
 741         } else {
 742                 /* else one pixel will take 2 byte */
 743                 val |= (((params->win.width * 2) + 31) >> 5) &
 744                         CCDC_HSIZE_VAL_MASK;
 745
 746                 dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
 747                        (((params->win.width * 2) + 31) >> 5) &
 748                         CCDC_HSIZE_VAL_MASK);
 749         }
 750         regw(val, HSIZE);
 751
 752         /* Configure SDOFST register */
 753         if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
 754                 if (params->image_invert_enable) {
 755                         /* For interlace inverse mode */
 756                         regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
 757                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 758                                 CCDC_SDOFST_INTERLACE_INVERSE);
 759                 } else {
 760                         /* For interlace non inverse mode */
 761                         regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
 762                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 763                                 CCDC_SDOFST_INTERLACE_NORMAL);
 764                 }
 765         } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
 766                 if (params->image_invert_enable) {
 767                         /* For progessive inverse mode */
 768                         regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
 769                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 770                                 CCDC_SDOFST_PROGRESSIVE_INVERSE);
 771                 } else {
 772                         /* For progessive non inverse mode */
 773                         regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
 774                         dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
 775                                 CCDC_SDOFST_PROGRESSIVE_NORMAL);
 776                 }
 777         }
 778         dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
 779         return 0;
 780 }
 781
 782 static int ccdc_configure(void)
 783 {
 784         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 785                 return ccdc_config_raw();
 786         else
 787                 ccdc_config_ycbcr();
 788         return 0;
 789 }
 790
 791 static int ccdc_set_buftype(enum ccdc_buftype buf_type)
 792 {
 793         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 794                 ccdc_cfg.bayer.buf_type = buf_type;
 795         else
 796                 ccdc_cfg.ycbcr.buf_type = buf_type;
 797         return 0;
 798 }
 799 static enum ccdc_buftype ccdc_get_buftype(void)
 800 {
 801         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 802                 return ccdc_cfg.bayer.buf_type;
 803         return ccdc_cfg.ycbcr.buf_type;
 804 }
 805
 806 static int ccdc_enum_pix(u32 *pix, int i)
 807 {
 808         int ret = -EINVAL;
 809         if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
 810                 if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
 811                         *pix = ccdc_raw_bayer_pix_formats[i];
 812                         ret = 0;
 813                 }
 814         } else {
 815                 if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
 816                         *pix = ccdc_raw_yuv_pix_formats[i];
 817                         ret = 0;
 818                 }
 819         }
 820         return ret;
 821 }
 822
 823 static int ccdc_set_pixel_format(u32 pixfmt)
 824 {
 825         struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
 826
 827         if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
 828                 ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
 829                 if (pixfmt == V4L2_PIX_FMT_SBGGR8)
 830                         alaw->enable = 1;
 831                 else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
 832                         return -EINVAL;
 833         } else {
 834                 if (pixfmt == V4L2_PIX_FMT_YUYV)
 835                         ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
 836                 else if (pixfmt == V4L2_PIX_FMT_UYVY)
 837                         ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
 838                 else
 839                         return -EINVAL;
 840         }
 841         return 0;
 842 }
 843 static u32 ccdc_get_pixel_format(void)
 844 {
 845         struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
 846         u32 pixfmt;
 847
 848         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 849                 if (alaw->enable)
 850                         pixfmt = V4L2_PIX_FMT_SBGGR8;
 851                 else
 852                         pixfmt = V4L2_PIX_FMT_SBGGR16;
 853         else {
 854                 if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
 855                         pixfmt = V4L2_PIX_FMT_YUYV;
 856                 else
 857                         pixfmt = V4L2_PIX_FMT_UYVY;
 858         }
 859         return pixfmt;
 860 }
 861 static int ccdc_set_image_window(struct v4l2_rect *win)
 862 {
 863         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 864                 ccdc_cfg.bayer.win = *win;
 865         else
 866                 ccdc_cfg.ycbcr.win = *win;
 867         return 0;
 868 }
 869
 870 static void ccdc_get_image_window(struct v4l2_rect *win)
 871 {
 872         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 873                 *win = ccdc_cfg.bayer.win;
 874         else
 875                 *win = ccdc_cfg.ycbcr.win;
 876 }
 877
 878 static unsigned int ccdc_get_line_length(void)
 879 {
 880         struct ccdc_config_params_raw *config_params =
 881                                 &ccdc_cfg.bayer.config_params;
 882         unsigned int len;
 883
 884         if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
 885                 if ((config_params->alaw.enable) ||
 886                     (config_params->data_sz == CCDC_DATA_8BITS))
 887                         len = ccdc_cfg.bayer.win.width;
 888                 else
 889                         len = ccdc_cfg.bayer.win.width * 2;
 890         } else
 891                 len = ccdc_cfg.ycbcr.win.width * 2;
 892         return ALIGN(len, 32);
 893 }
 894
 895 static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
 896 {
 897         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 898                 ccdc_cfg.bayer.frm_fmt = frm_fmt;
 899         else
 900                 ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
 901         return 0;
 902 }
 903
 904 static enum ccdc_frmfmt ccdc_get_frame_format(void)
 905 {
 906         if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
 907                 return ccdc_cfg.bayer.frm_fmt;
 908         else
 909                 return ccdc_cfg.ycbcr.frm_fmt;
 910 }
 911
 912 static int ccdc_getfid(void)
 913 {
 914         return  (regr(MODESET) >> 15) & 1;
 915 }
 916
 917 /* misc operations */
 918 static inline void ccdc_setfbaddr(unsigned long addr)
 919 {
 920         regw((addr >> 21) & 0x007f, STADRH);
 921         regw((addr >> 5) & 0x0ffff, STADRL);
 922 }
 923
 924 static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
 925 {
 926         ccdc_cfg.if_type = params->if_type;
 927
 928         switch (params->if_type) {
 929         case VPFE_BT656:
 930         case VPFE_YCBCR_SYNC_16:
 931         case VPFE_YCBCR_SYNC_8:
 932                 ccdc_cfg.ycbcr.vd_pol = params->vdpol;
 933                 ccdc_cfg.ycbcr.hd_pol = params->hdpol;
 934                 break;
 935         default:
 936                 /* TODO add support for raw bayer here */
 937                 return -EINVAL;
 938         }
 939         return 0;
 940 }
 941
 942 static struct ccdc_hw_device ccdc_hw_dev = {
 943         .name = "DM355 CCDC",
 944         .owner = THIS_MODULE,
 945         .hw_ops = {
 946                 .open = ccdc_open,
 947                 .close = ccdc_close,
 948                 .enable = ccdc_enable,
 949                 .enable_out_to_sdram = ccdc_enable_output_to_sdram,
 950                 .set_hw_if_params = ccdc_set_hw_if_params,
 951                 .set_params = ccdc_set_params,
 952                 .configure = ccdc_configure,
 953                 .set_buftype = ccdc_set_buftype,
 954                 .get_buftype = ccdc_get_buftype,
 955                 .enum_pix = ccdc_enum_pix,
 956                 .set_pixel_format = ccdc_set_pixel_format,
 957                 .get_pixel_format = ccdc_get_pixel_format,
 958                 .set_frame_format = ccdc_set_frame_format,
 959                 .get_frame_format = ccdc_get_frame_format,
 960                 .set_image_window = ccdc_set_image_window,
 961                 .get_image_window = ccdc_get_image_window,
 962                 .get_line_length = ccdc_get_line_length,
 963                 .setfbaddr = ccdc_setfbaddr,
 964                 .getfid = ccdc_getfid,
 965         },
 966 };
 967
 968 static int __devinit dm355_ccdc_probe(struct platform_device *pdev)
 969 {
 970         void (*setup_pinmux)(void);
 971         struct resource *res;
 972         int status = 0;
 973
 974         /*
 975          * first try to register with vpfe. If not correct platform, then we
 976          * don't have to iomap
 977          */
 978         status = vpfe_register_ccdc_device(&ccdc_hw_dev);
 979         if (status < 0)
 980                 return status;
 981
 982         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 983         if (!res) {
 984                 status = -ENODEV;
 985                 goto fail_nores;
 986         }
 987
 988         res = request_mem_region(res->start, resource_size(res), res->name);
 989         if (!res) {
 990                 status = -EBUSY;
 991                 goto fail_nores;
 992         }
 993
 994         ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
 995         if (!ccdc_cfg.base_addr) {
 996                 status = -ENOMEM;
 997                 goto fail_nomem;
 998         }
 999
1000         /* Get and enable Master clock */
1001         ccdc_cfg.mclk = clk_get(&pdev->dev, "master");
1002         if (IS_ERR(ccdc_cfg.mclk)) {
1003                 status = PTR_ERR(ccdc_cfg.mclk);
1004                 goto fail_nomap;
1005         }
1006         if (clk_prepare_enable(ccdc_cfg.mclk)) {
1007                 status = -ENODEV;
1008                 goto fail_mclk;
1009         }
1010
1011         /* Get and enable Slave clock */
1012         ccdc_cfg.sclk = clk_get(&pdev->dev, "slave");
1013         if (IS_ERR(ccdc_cfg.sclk)) {
1014                 status = PTR_ERR(ccdc_cfg.sclk);
1015                 goto fail_mclk;
1016         }
1017         if (clk_prepare_enable(ccdc_cfg.sclk)) {
1018                 status = -ENODEV;
1019                 goto fail_sclk;
1020         }
1021
1022         /* Platform data holds setup_pinmux function ptr */
1023         if (NULL == pdev->dev.platform_data) {
1024                 status = -ENODEV;
1025                 goto fail_sclk;
1026         }
1027         setup_pinmux = pdev->dev.platform_data;
1028         /*
1029          * setup Mux configuration for ccdc which may be different for
1030          * different SoCs using this CCDC
1031          */
1032         setup_pinmux();
1033         ccdc_cfg.dev = &pdev->dev;
1034         printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
1035         return 0;
1036 fail_sclk:
1037         clk_disable_unprepare(ccdc_cfg.sclk);
1038         clk_put(ccdc_cfg.sclk);
1039 fail_mclk:
1040         clk_disable_unprepare(ccdc_cfg.mclk);
1041         clk_put(ccdc_cfg.mclk);
1042 fail_nomap:
1043         iounmap(ccdc_cfg.base_addr);
1044 fail_nomem:
1045         release_mem_region(res->start, resource_size(res));
1046 fail_nores:
1047         vpfe_unregister_ccdc_device(&ccdc_hw_dev);
1048         return status;
1049 }
1050
1051 static int dm355_ccdc_remove(struct platform_device *pdev)
1052 {
1053         struct resource *res;
1054
1055         clk_disable_unprepare(ccdc_cfg.sclk);
1056         clk_disable_unprepare(ccdc_cfg.mclk);
1057         clk_put(ccdc_cfg.mclk);
1058         clk_put(ccdc_cfg.sclk);
1059         iounmap(ccdc_cfg.base_addr);
1060         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1061         if (res)
1062                 release_mem_region(res->start, resource_size(res));
1063         vpfe_unregister_ccdc_device(&ccdc_hw_dev);
1064         return 0;
1065 }
1066
1067 static struct platform_driver dm355_ccdc_driver = {
1068         .driver = {
1069                 .name   = "dm355_ccdc",
1070                 .owner = THIS_MODULE,
1071         },
1072         .remove = __devexit_p(dm355_ccdc_remove),
1073         .probe = dm355_ccdc_probe,
1074 };
1075
1076 module_platform_driver(dm355_ccdc_driver);