projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge remote-tracking branch 'netfilter-next/master'
[deliverable/linux.git] / drivers / media / platform / omap3isp / isppreview.c
1 /*
2 * isppreview.c
3 *
4 * TI OMAP3 ISP driver - Preview module
5 *
6 * Copyright (C) 2010 Nokia Corporation
7 * Copyright (C) 2009 Texas Instruments, Inc.
8 *
9 * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
10 * Sakari Ailus <sakari.ailus@iki.fi>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16
17 #include <linux/device.h>
18 #include <linux/mm.h>
19 #include <linux/module.h>
20 #include <linux/mutex.h>
21 #include <linux/uaccess.h>
22
23 #include "isp.h"
24 #include "ispreg.h"
25 #include "isppreview.h"
26
27 /* Default values in Office Fluorescent Light for RGBtoRGB Blending */
28 static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
29 { /* RGB-RGB Matrix */
30 {0x01E2, 0x0F30, 0x0FEE},
31 {0x0F9B, 0x01AC, 0x0FB9},
32 {0x0FE0, 0x0EC0, 0x0260}
33 }, /* RGB Offset */
34 {0x0000, 0x0000, 0x0000}
35 };
36
37 /* Default values in Office Fluorescent Light for RGB to YUV Conversion*/
38 static struct omap3isp_prev_csc flr_prev_csc = {
39 { /* CSC Coef Matrix */
40 {66, 129, 25},
41 {-38, -75, 112},
42 {112, -94 , -18}
43 }, /* CSC Offset */
44 {0x0, 0x0, 0x0}
45 };
46
47 /* Default values in Office Fluorescent Light for CFA Gradient*/
48 #define FLR_CFA_GRADTHRS_HORZ 0x28
49 #define FLR_CFA_GRADTHRS_VERT 0x28
50
51 /* Default values in Office Fluorescent Light for Chroma Suppression*/
52 #define FLR_CSUP_GAIN 0x0D
53 #define FLR_CSUP_THRES 0xEB
54
55 /* Default values in Office Fluorescent Light for Noise Filter*/
56 #define FLR_NF_STRGTH 0x03
57
58 /* Default values for White Balance */
59 #define FLR_WBAL_DGAIN 0x100
60 #define FLR_WBAL_COEF 0x20
61
62 /* Default values in Office Fluorescent Light for Black Adjustment*/
63 #define FLR_BLKADJ_BLUE 0x0
64 #define FLR_BLKADJ_GREEN 0x0
65 #define FLR_BLKADJ_RED 0x0
66
67 #define DEF_DETECT_CORRECT_VAL 0xe
68
69 /*
70 * Margins and image size limits.
71 *
72 * The preview engine crops several rows and columns internally depending on
73 * which filters are enabled. To avoid format changes when the filters are
74 * enabled or disabled (which would prevent them from being turned on or off
75 * during streaming), the driver assumes all filters that can be configured
76 * during streaming are enabled when computing sink crop and source format
77 * limits.
78 *
79 * If a filter is disabled, additional cropping is automatically added at the
80 * preview engine input by the driver to avoid overflow at line and frame end.
81 * This is completely transparent for applications.
82 *
83 * Median filter 4 pixels
84 * Noise filter,
85 * Faulty pixels correction 4 pixels, 4 lines
86 * Color suppression 2 pixels
87 * or luma enhancement
88 * -------------------------------------------------------------
89 * Maximum total 10 pixels, 4 lines
90 *
91 * The color suppression and luma enhancement filters are applied after bayer to
92 * YUV conversion. They thus can crop one pixel on the left and one pixel on the
93 * right side of the image without changing the color pattern. When both those
94 * filters are disabled, the driver must crop the two pixels on the same side of
95 * the image to avoid changing the bayer pattern. The left margin is thus set to
96 * 6 pixels and the right margin to 4 pixels.
97 */
98
99 #define PREV_MARGIN_LEFT 6
100 #define PREV_MARGIN_RIGHT 4
101 #define PREV_MARGIN_TOP 2
102 #define PREV_MARGIN_BOTTOM 2
103
104 #define PREV_MIN_IN_WIDTH 64
105 #define PREV_MIN_IN_HEIGHT 8
106 #define PREV_MAX_IN_HEIGHT 16384
107
108 #define PREV_MIN_OUT_WIDTH 0
109 #define PREV_MIN_OUT_HEIGHT 0
110 #define PREV_MAX_OUT_WIDTH_REV_1 1280
111 #define PREV_MAX_OUT_WIDTH_REV_2 3300
112 #define PREV_MAX_OUT_WIDTH_REV_15 4096
113
114 /*
115 * Coefficient Tables for the submodules in Preview.
116 * Array is initialised with the values from.the tables text file.
117 */
118
119 /*
120 * CFA Filter Coefficient Table
121 *
122 */
123 static u32 cfa_coef_table[4][OMAP3ISP_PREV_CFA_BLK_SIZE] = {
124 #include "cfa_coef_table.h"
125 };
126
127 /*
128 * Default Gamma Correction Table - All components
129 */
130 static u32 gamma_table[] = {
131 #include "gamma_table.h"
132 };
133
134 /*
135 * Noise Filter Threshold table
136 */
137 static u32 noise_filter_table[] = {
138 #include "noise_filter_table.h"
139 };
140
141 /*
142 * Luminance Enhancement Table
143 */
144 static u32 luma_enhance_table[] = {
145 #include "luma_enhance_table.h"
146 };
147
148 /*
149 * preview_config_luma_enhancement - Configure the Luminance Enhancement table
150 */
151 static void
152 preview_config_luma_enhancement(struct isp_prev_device *prev,
153 const struct prev_params *params)
154 {
155 struct isp_device *isp = to_isp_device(prev);
156 const struct omap3isp_prev_luma *yt = &params->luma;
157 unsigned int i;
158
159 isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR,
160 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
161 for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) {
162 isp_reg_writel(isp, yt->table[i],
163 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
164 }
165 }
166
167 /*
168 * preview_enable_luma_enhancement - Enable/disable Luminance Enhancement
169 */
170 static void
171 preview_enable_luma_enhancement(struct isp_prev_device *prev, bool enable)
172 {
173 struct isp_device *isp = to_isp_device(prev);
174
175 if (enable)
176 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
177 ISPPRV_PCR_YNENHEN);
178 else
179 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
180 ISPPRV_PCR_YNENHEN);
181 }
182
183 /*
184 * preview_enable_invalaw - Enable/disable Inverse A-Law decompression
185 */
186 static void preview_enable_invalaw(struct isp_prev_device *prev, bool enable)
187 {
188 struct isp_device *isp = to_isp_device(prev);
189
190 if (enable)
191 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
192 ISPPRV_PCR_INVALAW);
193 else
194 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
195 ISPPRV_PCR_INVALAW);
196 }
197
198 /*
199 * preview_config_hmed - Configure the Horizontal Median Filter
200 */
201 static void preview_config_hmed(struct isp_prev_device *prev,
202 const struct prev_params *params)
203 {
204 struct isp_device *isp = to_isp_device(prev);
205 const struct omap3isp_prev_hmed *hmed = &params->hmed;
206
207 isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) |
208 (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) |
209 (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT),
210 OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED);
211 }
212
213 /*
214 * preview_enable_hmed - Enable/disable the Horizontal Median Filter
215 */
216 static void preview_enable_hmed(struct isp_prev_device *prev, bool enable)
217 {
218 struct isp_device *isp = to_isp_device(prev);
219
220 if (enable)
221 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
222 ISPPRV_PCR_HMEDEN);
223 else
224 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
225 ISPPRV_PCR_HMEDEN);
226 }
227
228 /*
229 * preview_config_cfa - Configure CFA Interpolation for Bayer formats
230 *
231 * The CFA table is organised in four blocks, one per Bayer component. The
232 * hardware expects blocks to follow the Bayer order of the input data, while
233 * the driver stores the table in GRBG order in memory. The blocks need to be
234 * reordered to support non-GRBG Bayer patterns.
235 */
236 static void preview_config_cfa(struct isp_prev_device *prev,
237 const struct prev_params *params)
238 {
239 static const unsigned int cfa_coef_order[4][4] = {
240 { 0, 1, 2, 3 }, /* GRBG */
241 { 1, 0, 3, 2 }, /* RGGB */
242 { 2, 3, 0, 1 }, /* BGGR */
243 { 3, 2, 1, 0 }, /* GBRG */
244 };
245 const unsigned int *order = cfa_coef_order[prev->params.cfa_order];
246 const struct omap3isp_prev_cfa *cfa = &params->cfa;
247 struct isp_device *isp = to_isp_device(prev);
248 unsigned int i;
249 unsigned int j;
250
251 isp_reg_writel(isp,
252 (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
253 (cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT),
254 OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA);
255
256 isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
257 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
258
259 for (i = 0; i < 4; ++i) {
260 const __u32 *block = cfa->table[order[i]];
261
262 for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j)
263 isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV,
264 ISPPRV_SET_TBL_DATA);
265 }
266 }
267
268 /*
269 * preview_config_chroma_suppression - Configure Chroma Suppression
270 */
271 static void
272 preview_config_chroma_suppression(struct isp_prev_device *prev,
273 const struct prev_params *params)
274 {
275 struct isp_device *isp = to_isp_device(prev);
276 const struct omap3isp_prev_csup *cs = &params->csup;
277
278 isp_reg_writel(isp,
279 cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) |
280 (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT),
281 OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP);
282 }
283
284 /*
285 * preview_enable_chroma_suppression - Enable/disable Chrominance Suppression
286 */
287 static void
288 preview_enable_chroma_suppression(struct isp_prev_device *prev, bool enable)
289 {
290 struct isp_device *isp = to_isp_device(prev);
291
292 if (enable)
293 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
294 ISPPRV_PCR_SUPEN);
295 else
296 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
297 ISPPRV_PCR_SUPEN);
298 }
299
300 /*
301 * preview_config_whitebalance - Configure White Balance parameters
302 *
303 * Coefficient matrix always with default values.
304 */
305 static void
306 preview_config_whitebalance(struct isp_prev_device *prev,
307 const struct prev_params *params)
308 {
309 struct isp_device *isp = to_isp_device(prev);
310 const struct omap3isp_prev_wbal *wbal = &params->wbal;
311 u32 val;
312
313 isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN);
314
315 val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT;
316 val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT;
317 val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT;
318 val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT;
319 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN);
320
321 isp_reg_writel(isp,
322 ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT |
323 ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT |
324 ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT |
325 ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT |
326 ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT |
327 ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT |
328 ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT |
329 ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT |
330 ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT |
331 ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT |
332 ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT |
333 ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT |
334 ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT |
335 ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT |
336 ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT |
337 ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT,
338 OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL);
339 }
340
341 /*
342 * preview_config_blkadj - Configure Black Adjustment
343 */
344 static void
345 preview_config_blkadj(struct isp_prev_device *prev,
346 const struct prev_params *params)
347 {
348 struct isp_device *isp = to_isp_device(prev);
349 const struct omap3isp_prev_blkadj *blkadj = &params->blkadj;
350
351 isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) |
352 (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) |
353 (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT),
354 OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF);
355 }
356
357 /*
358 * preview_config_rgb_blending - Configure RGB-RGB Blending
359 */
360 static void
361 preview_config_rgb_blending(struct isp_prev_device *prev,
362 const struct prev_params *params)
363 {
364 struct isp_device *isp = to_isp_device(prev);
365 const struct omap3isp_prev_rgbtorgb *rgbrgb = &params->rgb2rgb;
366 u32 val;
367
368 val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT;
369 val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT;
370 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1);
371
372 val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT;
373 val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT;
374 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2);
375
376 val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT;
377 val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT;
378 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3);
379
380 val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT;
381 val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT;
382 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4);
383
384 val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT;
385 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5);
386
387 val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT;
388 val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT;
389 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1);
390
391 val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT;
392 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2);
393 }
394
395 /*
396 * preview_config_csc - Configure Color Space Conversion (RGB to YCbYCr)
397 */
398 static void
399 preview_config_csc(struct isp_prev_device *prev,
400 const struct prev_params *params)
401 {
402 struct isp_device *isp = to_isp_device(prev);
403 const struct omap3isp_prev_csc *csc = &params->csc;
404 u32 val;
405
406 val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT;
407 val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT;
408 val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT;
409 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0);
410
411 val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT;
412 val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT;
413 val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT;
414 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1);
415
416 val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT;
417 val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT;
418 val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT;
419 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2);
420
421 val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT;
422 val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT;
423 val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT;
424 isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET);
425 }
426
427 /*
428 * preview_config_yc_range - Configure the max and min Y and C values
429 */
430 static void
431 preview_config_yc_range(struct isp_prev_device *prev,
432 const struct prev_params *params)
433 {
434 struct isp_device *isp = to_isp_device(prev);
435 const struct omap3isp_prev_yclimit *yc = &params->yclimit;
436
437 isp_reg_writel(isp,
438 yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT |
439 yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT |
440 yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT |
441 yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT,
442 OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC);
443 }
444
445 /*
446 * preview_config_dcor - Configure Couplet Defect Correction
447 */
448 static void
449 preview_config_dcor(struct isp_prev_device *prev,
450 const struct prev_params *params)
451 {
452 struct isp_device *isp = to_isp_device(prev);
453 const struct omap3isp_prev_dcor *dcor = &params->dcor;
454
455 isp_reg_writel(isp, dcor->detect_correct[0],
456 OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0);
457 isp_reg_writel(isp, dcor->detect_correct[1],
458 OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1);
459 isp_reg_writel(isp, dcor->detect_correct[2],
460 OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2);
461 isp_reg_writel(isp, dcor->detect_correct[3],
462 OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3);
463 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
464 ISPPRV_PCR_DCCOUP,
465 dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0);
466 }
467
468 /*
469 * preview_enable_dcor - Enable/disable Couplet Defect Correction
470 */
471 static void preview_enable_dcor(struct isp_prev_device *prev, bool enable)
472 {
473 struct isp_device *isp = to_isp_device(prev);
474
475 if (enable)
476 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
477 ISPPRV_PCR_DCOREN);
478 else
479 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
480 ISPPRV_PCR_DCOREN);
481 }
482
483 /*
484 * preview_enable_drkframe_capture - Enable/disable Dark Frame Capture
485 */
486 static void
487 preview_enable_drkframe_capture(struct isp_prev_device *prev, bool enable)
488 {
489 struct isp_device *isp = to_isp_device(prev);
490
491 if (enable)
492 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
493 ISPPRV_PCR_DRKFCAP);
494 else
495 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
496 ISPPRV_PCR_DRKFCAP);
497 }
498
499 /*
500 * preview_enable_drkframe - Enable/disable Dark Frame Subtraction
501 */
502 static void preview_enable_drkframe(struct isp_prev_device *prev, bool enable)
503 {
504 struct isp_device *isp = to_isp_device(prev);
505
506 if (enable)
507 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
508 ISPPRV_PCR_DRKFEN);
509 else
510 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
511 ISPPRV_PCR_DRKFEN);
512 }
513
514 /*
515 * preview_config_noisefilter - Configure the Noise Filter
516 */
517 static void
518 preview_config_noisefilter(struct isp_prev_device *prev,
519 const struct prev_params *params)
520 {
521 struct isp_device *isp = to_isp_device(prev);
522 const struct omap3isp_prev_nf *nf = &params->nf;
523 unsigned int i;
524
525 isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF);
526 isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR,
527 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
528 for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) {
529 isp_reg_writel(isp, nf->table[i],
530 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
531 }
532 }
533
534 /*
535 * preview_enable_noisefilter - Enable/disable the Noise Filter
536 */
537 static void
538 preview_enable_noisefilter(struct isp_prev_device *prev, bool enable)
539 {
540 struct isp_device *isp = to_isp_device(prev);
541
542 if (enable)
543 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
544 ISPPRV_PCR_NFEN);
545 else
546 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
547 ISPPRV_PCR_NFEN);
548 }
549
550 /*
551 * preview_config_gammacorrn - Configure the Gamma Correction tables
552 */
553 static void
554 preview_config_gammacorrn(struct isp_prev_device *prev,
555 const struct prev_params *params)
556 {
557 struct isp_device *isp = to_isp_device(prev);
558 const struct omap3isp_prev_gtables *gt = &params->gamma;
559 unsigned int i;
560
561 isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR,
562 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
563 for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
564 isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV,
565 ISPPRV_SET_TBL_DATA);
566
567 isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR,
568 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
569 for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
570 isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV,
571 ISPPRV_SET_TBL_DATA);
572
573 isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR,
574 OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
575 for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
576 isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV,
577 ISPPRV_SET_TBL_DATA);
578 }
579
580 /*
581 * preview_enable_gammacorrn - Enable/disable Gamma Correction
582 *
583 * When gamma correction is disabled, the module is bypassed and its output is
584 * the 8 MSB of the 10-bit input .
585 */
586 static void
587 preview_enable_gammacorrn(struct isp_prev_device *prev, bool enable)
588 {
589 struct isp_device *isp = to_isp_device(prev);
590
591 if (enable)
592 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
593 ISPPRV_PCR_GAMMA_BYPASS);
594 else
595 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
596 ISPPRV_PCR_GAMMA_BYPASS);
597 }
598
599 /*
600 * preview_config_contrast - Configure the Contrast
601 *
602 * Value should be programmed before enabling the module.
603 */
604 static void
605 preview_config_contrast(struct isp_prev_device *prev,
606 const struct prev_params *params)
607 {
608 struct isp_device *isp = to_isp_device(prev);
609
610 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
611 0xff << ISPPRV_CNT_BRT_CNT_SHIFT,
612 params->contrast << ISPPRV_CNT_BRT_CNT_SHIFT);
613 }
614
615 /*
616 * preview_config_brightness - Configure the Brightness
617 */
618 static void
619 preview_config_brightness(struct isp_prev_device *prev,
620 const struct prev_params *params)
621 {
622 struct isp_device *isp = to_isp_device(prev);
623
624 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
625 0xff << ISPPRV_CNT_BRT_BRT_SHIFT,
626 params->brightness << ISPPRV_CNT_BRT_BRT_SHIFT);
627 }
628
629 /*
630 * preview_update_contrast - Updates the contrast.
631 * @contrast: Pointer to hold the current programmed contrast value.
632 *
633 * Value should be programmed before enabling the module.
634 */
635 static void
636 preview_update_contrast(struct isp_prev_device *prev, u8 contrast)
637 {
638 struct prev_params *params;
639 unsigned long flags;
640
641 spin_lock_irqsave(&prev->params.lock, flags);
642 params = (prev->params.active & OMAP3ISP_PREV_CONTRAST)
643 ? &prev->params.params[0] : &prev->params.params[1];
644
645 if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) {
646 params->contrast = contrast * ISPPRV_CONTRAST_UNITS;
647 params->update |= OMAP3ISP_PREV_CONTRAST;
648 }
649 spin_unlock_irqrestore(&prev->params.lock, flags);
650 }
651
652 /*
653 * preview_update_brightness - Updates the brightness in preview module.
654 * @brightness: Pointer to hold the current programmed brightness value.
655 *
656 */
657 static void
658 preview_update_brightness(struct isp_prev_device *prev, u8 brightness)
659 {
660 struct prev_params *params;
661 unsigned long flags;
662
663 spin_lock_irqsave(&prev->params.lock, flags);
664 params = (prev->params.active & OMAP3ISP_PREV_BRIGHTNESS)
665 ? &prev->params.params[0] : &prev->params.params[1];
666
667 if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) {
668 params->brightness = brightness * ISPPRV_BRIGHT_UNITS;
669 params->update |= OMAP3ISP_PREV_BRIGHTNESS;
670 }
671 spin_unlock_irqrestore(&prev->params.lock, flags);
672 }
673
674 static u32
675 preview_params_lock(struct isp_prev_device *prev, u32 update, bool shadow)
676 {
677 u32 active = prev->params.active;
678
679 if (shadow) {
680 /* Mark all shadow parameters we are going to touch as busy. */
681 prev->params.params[0].busy |= ~active & update;
682 prev->params.params[1].busy |= active & update;
683 } else {
684 /* Mark all active parameters we are going to touch as busy. */
685 update = (prev->params.params[0].update & active)
686 | (prev->params.params[1].update & ~active);
687
688 prev->params.params[0].busy |= active & update;
689 prev->params.params[1].busy |= ~active & update;
690 }
691
692 return update;
693 }
694
695 static void
696 preview_params_unlock(struct isp_prev_device *prev, u32 update, bool shadow)
697 {
698 u32 active = prev->params.active;
699
700 if (shadow) {
701 /* Set the update flag for shadow parameters that have been
702 * updated and clear the busy flag for all shadow parameters.
703 */
704 prev->params.params[0].update |= (~active & update);
705 prev->params.params[1].update |= (active & update);
706 prev->params.params[0].busy &= active;
707 prev->params.params[1].busy &= ~active;
708 } else {
709 /* Clear the update flag for active parameters that have been
710 * applied and the busy flag for all active parameters.
711 */
712 prev->params.params[0].update &= ~(active & update);
713 prev->params.params[1].update &= ~(~active & update);
714 prev->params.params[0].busy &= ~active;
715 prev->params.params[1].busy &= active;
716 }
717 }
718
719 static void preview_params_switch(struct isp_prev_device *prev)
720 {
721 u32 to_switch;
722
723 /* Switch active parameters with updated shadow parameters when the
724 * shadow parameter has been updated and neither the active not the
725 * shadow parameter is busy.
726 */
727 to_switch = (prev->params.params[0].update & ~prev->params.active)
728 | (prev->params.params[1].update & prev->params.active);
729 to_switch &= ~(prev->params.params[0].busy |
730 prev->params.params[1].busy);
731 if (to_switch == 0)
732 return;
733
734 prev->params.active ^= to_switch;
735
736 /* Remove the update flag for the shadow copy of parameters we have
737 * switched.
738 */
739 prev->params.params[0].update &= ~(~prev->params.active & to_switch);
740 prev->params.params[1].update &= ~(prev->params.active & to_switch);
741 }
742
743 /* preview parameters update structure */
744 struct preview_update {
745 void (*config)(struct isp_prev_device *, const struct prev_params *);
746 void (*enable)(struct isp_prev_device *, bool);
747 unsigned int param_offset;
748 unsigned int param_size;
749 unsigned int config_offset;
750 bool skip;
751 };
752
753 /* Keep the array indexed by the OMAP3ISP_PREV_* bit number. */
754 static const struct preview_update update_attrs[] = {
755 /* OMAP3ISP_PREV_LUMAENH */ {
756 preview_config_luma_enhancement,
757 preview_enable_luma_enhancement,
758 offsetof(struct prev_params, luma),
759 FIELD_SIZEOF(struct prev_params, luma),
760 offsetof(struct omap3isp_prev_update_config, luma),
761 }, /* OMAP3ISP_PREV_INVALAW */ {
762 NULL,
763 preview_enable_invalaw,
764 }, /* OMAP3ISP_PREV_HRZ_MED */ {
765 preview_config_hmed,
766 preview_enable_hmed,
767 offsetof(struct prev_params, hmed),
768 FIELD_SIZEOF(struct prev_params, hmed),
769 offsetof(struct omap3isp_prev_update_config, hmed),
770 }, /* OMAP3ISP_PREV_CFA */ {
771 preview_config_cfa,
772 NULL,
773 offsetof(struct prev_params, cfa),
774 FIELD_SIZEOF(struct prev_params, cfa),
775 offsetof(struct omap3isp_prev_update_config, cfa),
776 }, /* OMAP3ISP_PREV_CHROMA_SUPP */ {
777 preview_config_chroma_suppression,
778 preview_enable_chroma_suppression,
779 offsetof(struct prev_params, csup),
780 FIELD_SIZEOF(struct prev_params, csup),
781 offsetof(struct omap3isp_prev_update_config, csup),
782 }, /* OMAP3ISP_PREV_WB */ {
783 preview_config_whitebalance,
784 NULL,
785 offsetof(struct prev_params, wbal),
786 FIELD_SIZEOF(struct prev_params, wbal),
787 offsetof(struct omap3isp_prev_update_config, wbal),
788 }, /* OMAP3ISP_PREV_BLKADJ */ {
789 preview_config_blkadj,
790 NULL,
791 offsetof(struct prev_params, blkadj),
792 FIELD_SIZEOF(struct prev_params, blkadj),
793 offsetof(struct omap3isp_prev_update_config, blkadj),
794 }, /* OMAP3ISP_PREV_RGB2RGB */ {
795 preview_config_rgb_blending,
796 NULL,
797 offsetof(struct prev_params, rgb2rgb),
798 FIELD_SIZEOF(struct prev_params, rgb2rgb),
799 offsetof(struct omap3isp_prev_update_config, rgb2rgb),
800 }, /* OMAP3ISP_PREV_COLOR_CONV */ {
801 preview_config_csc,
802 NULL,
803 offsetof(struct prev_params, csc),
804 FIELD_SIZEOF(struct prev_params, csc),
805 offsetof(struct omap3isp_prev_update_config, csc),
806 }, /* OMAP3ISP_PREV_YC_LIMIT */ {
807 preview_config_yc_range,
808 NULL,
809 offsetof(struct prev_params, yclimit),
810 FIELD_SIZEOF(struct prev_params, yclimit),
811 offsetof(struct omap3isp_prev_update_config, yclimit),
812 }, /* OMAP3ISP_PREV_DEFECT_COR */ {
813 preview_config_dcor,
814 preview_enable_dcor,
815 offsetof(struct prev_params, dcor),
816 FIELD_SIZEOF(struct prev_params, dcor),
817 offsetof(struct omap3isp_prev_update_config, dcor),
818 }, /* Previously OMAP3ISP_PREV_GAMMABYPASS, not used anymore */ {
819 NULL,
820 NULL,
821 }, /* OMAP3ISP_PREV_DRK_FRM_CAPTURE */ {
822 NULL,
823 preview_enable_drkframe_capture,
824 }, /* OMAP3ISP_PREV_DRK_FRM_SUBTRACT */ {
825 NULL,
826 preview_enable_drkframe,
827 }, /* OMAP3ISP_PREV_LENS_SHADING */ {
828 NULL,
829 preview_enable_drkframe,
830 }, /* OMAP3ISP_PREV_NF */ {
831 preview_config_noisefilter,
832 preview_enable_noisefilter,
833 offsetof(struct prev_params, nf),
834 FIELD_SIZEOF(struct prev_params, nf),
835 offsetof(struct omap3isp_prev_update_config, nf),
836 }, /* OMAP3ISP_PREV_GAMMA */ {
837 preview_config_gammacorrn,
838 preview_enable_gammacorrn,
839 offsetof(struct prev_params, gamma),
840 FIELD_SIZEOF(struct prev_params, gamma),
841 offsetof(struct omap3isp_prev_update_config, gamma),
842 }, /* OMAP3ISP_PREV_CONTRAST */ {
843 preview_config_contrast,
844 NULL,
845 0, 0, 0, true,
846 }, /* OMAP3ISP_PREV_BRIGHTNESS */ {
847 preview_config_brightness,
848 NULL,
849 0, 0, 0, true,
850 },
851 };
852
853 /*
854 * preview_config - Copy and update local structure with userspace preview
855 * configuration.
856 * @prev: ISP preview engine
857 * @cfg: Configuration
858 *
859 * Return zero if success or -EFAULT if the configuration can't be copied from
860 * userspace.
861 */
862 static int preview_config(struct isp_prev_device *prev,
863 struct omap3isp_prev_update_config *cfg)
864 {
865 unsigned long flags;
866 unsigned int i;
867 int rval = 0;
868 u32 update;
869 u32 active;
870
871 if (cfg->update == 0)
872 return 0;
873
874 /* Mark the shadow parameters we're going to update as busy. */
875 spin_lock_irqsave(&prev->params.lock, flags);
876 preview_params_lock(prev, cfg->update, true);
877 active = prev->params.active;
878 spin_unlock_irqrestore(&prev->params.lock, flags);
879
880 update = 0;
881
882 for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
883 const struct preview_update *attr = &update_attrs[i];
884 struct prev_params *params;
885 unsigned int bit = 1 << i;
886
887 if (attr->skip || !(cfg->update & bit))
888 continue;
889
890 params = &prev->params.params[!!(active & bit)];
891
892 if (cfg->flag & bit) {
893 void __user *from = *(void * __user *)
894 ((void *)cfg + attr->config_offset);
895 void *to = (void *)params + attr->param_offset;
896 size_t size = attr->param_size;
897
898 if (to && from && size) {
899 if (copy_from_user(to, from, size)) {
900 rval = -EFAULT;
901 break;
902 }
903 }
904 params->features |= bit;
905 } else {
906 params->features &= ~bit;
907 }
908
909 update |= bit;
910 }
911
912 spin_lock_irqsave(&prev->params.lock, flags);
913 preview_params_unlock(prev, update, true);
914 preview_params_switch(prev);
915 spin_unlock_irqrestore(&prev->params.lock, flags);
916
917 return rval;
918 }
919
920 /*
921 * preview_setup_hw - Setup preview registers and/or internal memory
922 * @prev: pointer to preview private structure
923 * @update: Bitmask of parameters to setup
924 * @active: Bitmask of parameters active in set 0
925 * Note: can be called from interrupt context
926 * Return none
927 */
928 static void preview_setup_hw(struct isp_prev_device *prev, u32 update,
929 u32 active)
930 {
931 unsigned int i;
932
933 if (update == 0)
934 return;
935
936 for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
937 const struct preview_update *attr = &update_attrs[i];
938 struct prev_params *params;
939 unsigned int bit = 1 << i;
940
941 if (!(update & bit))
942 continue;
943
944 params = &prev->params.params[!(active & bit)];
945
946 if (params->features & bit) {
947 if (attr->config)
948 attr->config(prev, params);
949 if (attr->enable)
950 attr->enable(prev, true);
951 } else {
952 if (attr->enable)
953 attr->enable(prev, false);
954 }
955 }
956 }
957
958 /*
959 * preview_config_ycpos - Configure byte layout of YUV image.
960 * @prev: pointer to previewer private structure
961 * @pixelcode: pixel code
962 */
963 static void preview_config_ycpos(struct isp_prev_device *prev, u32 pixelcode)
964 {
965 struct isp_device *isp = to_isp_device(prev);
966 enum preview_ycpos_mode mode;
967
968 switch (pixelcode) {
969 case MEDIA_BUS_FMT_YUYV8_1X16:
970 mode = YCPOS_CrYCbY;
971 break;
972 case MEDIA_BUS_FMT_UYVY8_1X16:
973 mode = YCPOS_YCrYCb;
974 break;
975 default:
976 return;
977 }
978
979 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
980 ISPPRV_PCR_YCPOS_CrYCbY,
981 mode << ISPPRV_PCR_YCPOS_SHIFT);
982 }
983
984 /*
985 * preview_config_averager - Enable / disable / configure averager
986 * @average: Average value to be configured.
987 */
988 static void preview_config_averager(struct isp_prev_device *prev, u8 average)
989 {
990 struct isp_device *isp = to_isp_device(prev);
991
992 isp_reg_writel(isp, ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
993 ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
994 average, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
995 }
996
997
998 /*
999 * preview_config_input_format - Configure the input format
1000 * @prev: The preview engine
1001 * @info: Sink pad format information
1002 *
1003 * Enable and configure CFA interpolation for Bayer formats and disable it for
1004 * greyscale formats.
1005 *
1006 * The CFA table is organised in four blocks, one per Bayer component. The
1007 * hardware expects blocks to follow the Bayer order of the input data, while
1008 * the driver stores the table in GRBG order in memory. The blocks need to be
1009 * reordered to support non-GRBG Bayer patterns.
1010 */
1011 static void preview_config_input_format(struct isp_prev_device *prev,
1012 const struct isp_format_info *info)
1013 {
1014 struct isp_device *isp = to_isp_device(prev);
1015 struct prev_params *params;
1016
1017 if (info->width == 8)
1018 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1019 ISPPRV_PCR_WIDTH);
1020 else
1021 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1022 ISPPRV_PCR_WIDTH);
1023
1024 switch (info->flavor) {
1025 case MEDIA_BUS_FMT_SGRBG8_1X8:
1026 prev->params.cfa_order = 0;
1027 break;
1028 case MEDIA_BUS_FMT_SRGGB8_1X8:
1029 prev->params.cfa_order = 1;
1030 break;
1031 case MEDIA_BUS_FMT_SBGGR8_1X8:
1032 prev->params.cfa_order = 2;
1033 break;
1034 case MEDIA_BUS_FMT_SGBRG8_1X8:
1035 prev->params.cfa_order = 3;
1036 break;
1037 default:
1038 /* Disable CFA for non-Bayer formats. */
1039 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1040 ISPPRV_PCR_CFAEN);
1041 return;
1042 }
1043
1044 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN);
1045 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1046 ISPPRV_PCR_CFAFMT_MASK, ISPPRV_PCR_CFAFMT_BAYER);
1047
1048 params = (prev->params.active & OMAP3ISP_PREV_CFA)
1049 ? &prev->params.params[0] : &prev->params.params[1];
1050
1051 preview_config_cfa(prev, params);
1052 }
1053
1054 /*
1055 * preview_config_input_size - Configure the input frame size
1056 *
1057 * The preview engine crops several rows and columns internally depending on
1058 * which processing blocks are enabled. The driver assumes all those blocks are
1059 * enabled when reporting source pad formats to userspace. If this assumption is
1060 * not true, rows and columns must be manually cropped at the preview engine
1061 * input to avoid overflows at the end of lines and frames.
1062 *
1063 * See the explanation at the PREV_MARGIN_* definitions for more details.
1064 */
1065 static void preview_config_input_size(struct isp_prev_device *prev, u32 active)
1066 {
1067 const struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK];
1068 struct isp_device *isp = to_isp_device(prev);
1069 unsigned int sph = prev->crop.left;
1070 unsigned int eph = prev->crop.left + prev->crop.width - 1;
1071 unsigned int slv = prev->crop.top;
1072 unsigned int elv = prev->crop.top + prev->crop.height - 1;
1073 u32 features;
1074
1075 if (format->code != MEDIA_BUS_FMT_Y8_1X8 &&
1076 format->code != MEDIA_BUS_FMT_Y10_1X10) {
1077 sph -= 2;
1078 eph += 2;
1079 slv -= 2;
1080 elv += 2;
1081 }
1082
1083 features = (prev->params.params[0].features & active)
1084 | (prev->params.params[1].features & ~active);
1085
1086 if (features & (OMAP3ISP_PREV_DEFECT_COR | OMAP3ISP_PREV_NF)) {
1087 sph -= 2;
1088 eph += 2;
1089 slv -= 2;
1090 elv += 2;
1091 }
1092 if (features & OMAP3ISP_PREV_HRZ_MED) {
1093 sph -= 2;
1094 eph += 2;
1095 }
1096 if (features & (OMAP3ISP_PREV_CHROMA_SUPP | OMAP3ISP_PREV_LUMAENH))
1097 sph -= 2;
1098
1099 isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
1100 OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
1101 isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv,
1102 OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO);
1103 }
1104
1105 /*
1106 * preview_config_inlineoffset - Configures the Read address line offset.
1107 * @prev: Preview module
1108 * @offset: Line offset
1109 *
1110 * According to the TRM, the line offset must be aligned on a 32 bytes boundary.
1111 * However, a hardware bug requires the memory start address to be aligned on a
1112 * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as
1113 * well.
1114 */
1115 static void
1116 preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset)
1117 {
1118 struct isp_device *isp = to_isp_device(prev);
1119
1120 isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
1121 ISPPRV_RADR_OFFSET);
1122 }
1123
1124 /*
1125 * preview_set_inaddr - Sets memory address of input frame.
1126 * @addr: 32bit memory address aligned on 32byte boundary.
1127 *
1128 * Configures the memory address from which the input frame is to be read.
1129 */
1130 static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr)
1131 {
1132 struct isp_device *isp = to_isp_device(prev);
1133
1134 isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR);
1135 }
1136
1137 /*
1138 * preview_config_outlineoffset - Configures the Write address line offset.
1139 * @offset: Line Offset for the preview output.
1140 *
1141 * The offset must be a multiple of 32 bytes.
1142 */
1143 static void preview_config_outlineoffset(struct isp_prev_device *prev,
1144 u32 offset)
1145 {
1146 struct isp_device *isp = to_isp_device(prev);
1147
1148 isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
1149 ISPPRV_WADD_OFFSET);
1150 }
1151
1152 /*
1153 * preview_set_outaddr - Sets the memory address to store output frame
1154 * @addr: 32bit memory address aligned on 32byte boundary.
1155 *
1156 * Configures the memory address to which the output frame is written.
1157 */
1158 static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr)
1159 {
1160 struct isp_device *isp = to_isp_device(prev);
1161
1162 isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR);
1163 }
1164
1165 static void preview_adjust_bandwidth(struct isp_prev_device *prev)
1166 {
1167 struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
1168 struct isp_device *isp = to_isp_device(prev);
1169 const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK];
1170 unsigned long l3_ick = pipe->l3_ick;
1171 struct v4l2_fract *timeperframe;
1172 unsigned int cycles_per_frame;
1173 unsigned int requests_per_frame;
1174 unsigned int cycles_per_request;
1175 unsigned int minimum;
1176 unsigned int maximum;
1177 unsigned int value;
1178
1179 if (prev->input != PREVIEW_INPUT_MEMORY) {
1180 isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
1181 ISPSBL_SDR_REQ_PRV_EXP_MASK);
1182 return;
1183 }
1184
1185 /* Compute the minimum number of cycles per request, based on the
1186 * pipeline maximum data rate. This is an absolute lower bound if we
1187 * don't want SBL overflows, so round the value up.
1188 */
1189 cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1,
1190 pipe->max_rate);
1191 minimum = DIV_ROUND_UP(cycles_per_request, 32);
1192
1193 /* Compute the maximum number of cycles per request, based on the
1194 * requested frame rate. This is a soft upper bound to achieve a frame
1195 * rate equal or higher than the requested value, so round the value
1196 * down.
1197 */
1198 timeperframe = &pipe->max_timeperframe;
1199
1200 requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height;
1201 cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator,
1202 timeperframe->denominator);
1203 cycles_per_request = cycles_per_frame / requests_per_frame;
1204
1205 maximum = cycles_per_request / 32;
1206
1207 value = max(minimum, maximum);
1208
1209 dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value);
1210 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
1211 ISPSBL_SDR_REQ_PRV_EXP_MASK,
1212 value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT);
1213 }
1214
1215 /*
1216 * omap3isp_preview_busy - Gets busy state of preview module.
1217 */
1218 int omap3isp_preview_busy(struct isp_prev_device *prev)
1219 {
1220 struct isp_device *isp = to_isp_device(prev);
1221
1222 return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR)
1223 & ISPPRV_PCR_BUSY;
1224 }
1225
1226 /*
1227 * omap3isp_preview_restore_context - Restores the values of preview registers
1228 */
1229 void omap3isp_preview_restore_context(struct isp_device *isp)
1230 {
1231 struct isp_prev_device *prev = &isp->isp_prev;
1232 const u32 update = OMAP3ISP_PREV_FEATURES_END - 1;
1233
1234 prev->params.params[0].update = prev->params.active & update;
1235 prev->params.params[1].update = ~prev->params.active & update;
1236
1237 preview_setup_hw(prev, update, prev->params.active);
1238
1239 prev->params.params[0].update = 0;
1240 prev->params.params[1].update = 0;
1241 }
1242
1243 /*
1244 * preview_print_status - Dump preview module registers to the kernel log
1245 */
1246 #define PREV_PRINT_REGISTER(isp, name)\
1247 dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \
1248 isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name))
1249
1250 static void preview_print_status(struct isp_prev_device *prev)
1251 {
1252 struct isp_device *isp = to_isp_device(prev);
1253
1254 dev_dbg(isp->dev, "-------------Preview Register dump----------\n");
1255
1256 PREV_PRINT_REGISTER(isp, PCR);
1257 PREV_PRINT_REGISTER(isp, HORZ_INFO);
1258 PREV_PRINT_REGISTER(isp, VERT_INFO);
1259 PREV_PRINT_REGISTER(isp, RSDR_ADDR);
1260 PREV_PRINT_REGISTER(isp, RADR_OFFSET);
1261 PREV_PRINT_REGISTER(isp, DSDR_ADDR);
1262 PREV_PRINT_REGISTER(isp, DRKF_OFFSET);
1263 PREV_PRINT_REGISTER(isp, WSDR_ADDR);
1264 PREV_PRINT_REGISTER(isp, WADD_OFFSET);
1265 PREV_PRINT_REGISTER(isp, AVE);
1266 PREV_PRINT_REGISTER(isp, HMED);
1267 PREV_PRINT_REGISTER(isp, NF);
1268 PREV_PRINT_REGISTER(isp, WB_DGAIN);
1269 PREV_PRINT_REGISTER(isp, WBGAIN);
1270 PREV_PRINT_REGISTER(isp, WBSEL);
1271 PREV_PRINT_REGISTER(isp, CFA);
1272 PREV_PRINT_REGISTER(isp, BLKADJOFF);
1273 PREV_PRINT_REGISTER(isp, RGB_MAT1);
1274 PREV_PRINT_REGISTER(isp, RGB_MAT2);
1275 PREV_PRINT_REGISTER(isp, RGB_MAT3);
1276 PREV_PRINT_REGISTER(isp, RGB_MAT4);
1277 PREV_PRINT_REGISTER(isp, RGB_MAT5);
1278 PREV_PRINT_REGISTER(isp, RGB_OFF1);
1279 PREV_PRINT_REGISTER(isp, RGB_OFF2);
1280 PREV_PRINT_REGISTER(isp, CSC0);
1281 PREV_PRINT_REGISTER(isp, CSC1);
1282 PREV_PRINT_REGISTER(isp, CSC2);
1283 PREV_PRINT_REGISTER(isp, CSC_OFFSET);
1284 PREV_PRINT_REGISTER(isp, CNT_BRT);
1285 PREV_PRINT_REGISTER(isp, CSUP);
1286 PREV_PRINT_REGISTER(isp, SETUP_YC);
1287 PREV_PRINT_REGISTER(isp, SET_TBL_ADDR);
1288 PREV_PRINT_REGISTER(isp, CDC_THR0);
1289 PREV_PRINT_REGISTER(isp, CDC_THR1);
1290 PREV_PRINT_REGISTER(isp, CDC_THR2);
1291 PREV_PRINT_REGISTER(isp, CDC_THR3);
1292
1293 dev_dbg(isp->dev, "--------------------------------------------\n");
1294 }
1295
1296 /*
1297 * preview_init_params - init image processing parameters.
1298 * @prev: pointer to previewer private structure
1299 */
1300 static void preview_init_params(struct isp_prev_device *prev)
1301 {
1302 struct prev_params *params;
1303 unsigned int i;
1304
1305 spin_lock_init(&prev->params.lock);
1306
1307 prev->params.active = ~0;
1308 prev->params.params[0].busy = 0;
1309 prev->params.params[0].update = OMAP3ISP_PREV_FEATURES_END - 1;
1310 prev->params.params[1].busy = 0;
1311 prev->params.params[1].update = 0;
1312
1313 params = &prev->params.params[0];
1314
1315 /* Init values */
1316 params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
1317 params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
1318 params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
1319 memcpy(params->cfa.table, cfa_coef_table,
1320 sizeof(params->cfa.table));
1321 params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ;
1322 params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT;
1323 params->csup.gain = FLR_CSUP_GAIN;
1324 params->csup.thres = FLR_CSUP_THRES;
1325 params->csup.hypf_en = 0;
1326 memcpy(params->luma.table, luma_enhance_table,
1327 sizeof(params->luma.table));
1328 params->nf.spread = FLR_NF_STRGTH;
1329 memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table));
1330 params->dcor.couplet_mode_en = 1;
1331 for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++)
1332 params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL;
1333 memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue));
1334 memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green));
1335 memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red));
1336 params->wbal.dgain = FLR_WBAL_DGAIN;
1337 params->wbal.coef0 = FLR_WBAL_COEF;
1338 params->wbal.coef1 = FLR_WBAL_COEF;
1339 params->wbal.coef2 = FLR_WBAL_COEF;
1340 params->wbal.coef3 = FLR_WBAL_COEF;
1341 params->blkadj.red = FLR_BLKADJ_RED;
1342 params->blkadj.green = FLR_BLKADJ_GREEN;
1343 params->blkadj.blue = FLR_BLKADJ_BLUE;
1344 params->rgb2rgb = flr_rgb2rgb;
1345 params->csc = flr_prev_csc;
1346 params->yclimit.minC = ISPPRV_YC_MIN;
1347 params->yclimit.maxC = ISPPRV_YC_MAX;
1348 params->yclimit.minY = ISPPRV_YC_MIN;
1349 params->yclimit.maxY = ISPPRV_YC_MAX;
1350
1351 params->features = OMAP3ISP_PREV_CFA | OMAP3ISP_PREV_DEFECT_COR
1352 | OMAP3ISP_PREV_NF | OMAP3ISP_PREV_GAMMA
1353 | OMAP3ISP_PREV_BLKADJ | OMAP3ISP_PREV_YC_LIMIT
1354 | OMAP3ISP_PREV_RGB2RGB | OMAP3ISP_PREV_COLOR_CONV
1355 | OMAP3ISP_PREV_WB | OMAP3ISP_PREV_BRIGHTNESS
1356 | OMAP3ISP_PREV_CONTRAST;
1357 }
1358
1359 /*
1360 * preview_max_out_width - Handle previewer hardware output limitations
1361 * @prev: pointer to previewer private structure
1362 * returns maximum width output for current isp revision
1363 */
1364 static unsigned int preview_max_out_width(struct isp_prev_device *prev)
1365 {
1366 struct isp_device *isp = to_isp_device(prev);
1367
1368 switch (isp->revision) {
1369 case ISP_REVISION_1_0:
1370 return PREV_MAX_OUT_WIDTH_REV_1;
1371
1372 case ISP_REVISION_2_0:
1373 default:
1374 return PREV_MAX_OUT_WIDTH_REV_2;
1375
1376 case ISP_REVISION_15_0:
1377 return PREV_MAX_OUT_WIDTH_REV_15;
1378 }
1379 }
1380
1381 static void preview_configure(struct isp_prev_device *prev)
1382 {
1383 struct isp_device *isp = to_isp_device(prev);
1384 const struct isp_format_info *info;
1385 struct v4l2_mbus_framefmt *format;
1386 unsigned long flags;
1387 u32 update;
1388 u32 active;
1389
1390 spin_lock_irqsave(&prev->params.lock, flags);
1391 /* Mark all active parameters we are going to touch as busy. */
1392 update = preview_params_lock(prev, 0, false);
1393 active = prev->params.active;
1394 spin_unlock_irqrestore(&prev->params.lock, flags);
1395
1396 /* PREV_PAD_SINK */
1397 format = &prev->formats[PREV_PAD_SINK];
1398 info = omap3isp_video_format_info(format->code);
1399
1400 preview_adjust_bandwidth(prev);
1401
1402 preview_config_input_format(prev, info);
1403 preview_config_input_size(prev, active);
1404
1405 if (prev->input == PREVIEW_INPUT_CCDC)
1406 preview_config_inlineoffset(prev, 0);
1407 else
1408 preview_config_inlineoffset(prev, ALIGN(format->width, 0x20) *
1409 info->bpp);
1410
1411 preview_setup_hw(prev, update, active);
1412
1413 /* PREV_PAD_SOURCE */
1414 format = &prev->formats[PREV_PAD_SOURCE];
1415
1416 if (prev->output & PREVIEW_OUTPUT_MEMORY)
1417 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1418 ISPPRV_PCR_SDRPORT);
1419 else
1420 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1421 ISPPRV_PCR_SDRPORT);
1422
1423 if (prev->output & PREVIEW_OUTPUT_RESIZER)
1424 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1425 ISPPRV_PCR_RSZPORT);
1426 else
1427 isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1428 ISPPRV_PCR_RSZPORT);
1429
1430 if (prev->output & PREVIEW_OUTPUT_MEMORY)
1431 preview_config_outlineoffset(prev,
1432 ALIGN(format->width, 0x10) * 2);
1433
1434 preview_config_averager(prev, 0);
1435 preview_config_ycpos(prev, format->code);
1436
1437 spin_lock_irqsave(&prev->params.lock, flags);
1438 preview_params_unlock(prev, update, false);
1439 spin_unlock_irqrestore(&prev->params.lock, flags);
1440 }
1441
1442 /* -----------------------------------------------------------------------------
1443 * Interrupt handling
1444 */
1445
1446 static void preview_enable_oneshot(struct isp_prev_device *prev)
1447 {
1448 struct isp_device *isp = to_isp_device(prev);
1449
1450 /* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE
1451 * bit is set. As the preview engine is used in single-shot mode, we
1452 * need to set PCR.SOURCE before enabling the preview engine.
1453 */
1454 if (prev->input == PREVIEW_INPUT_MEMORY)
1455 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1456 ISPPRV_PCR_SOURCE);
1457
1458 isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
1459 ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT);
1460 }
1461
1462 void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev)
1463 {
1464 /*
1465 * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun
1466 * condition, the module was paused and now we have a buffer queued
1467 * on the output again. Restart the pipeline if running in continuous
1468 * mode.
1469 */
1470 if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
1471 prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
1472 preview_enable_oneshot(prev);
1473 isp_video_dmaqueue_flags_clr(&prev->video_out);
1474 }
1475 }
1476
1477 static void preview_isr_buffer(struct isp_prev_device *prev)
1478 {
1479 struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
1480 struct isp_buffer *buffer;
1481 int restart = 0;
1482
1483 if (prev->output & PREVIEW_OUTPUT_MEMORY) {
1484 buffer = omap3isp_video_buffer_next(&prev->video_out);
1485 if (buffer != NULL) {
1486 preview_set_outaddr(prev, buffer->dma);
1487 restart = 1;
1488 }
1489 pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
1490 }
1491
1492 if (prev->input == PREVIEW_INPUT_MEMORY) {
1493 buffer = omap3isp_video_buffer_next(&prev->video_in);
1494 if (buffer != NULL)
1495 preview_set_inaddr(prev, buffer->dma);
1496 pipe->state |= ISP_PIPELINE_IDLE_INPUT;
1497 }
1498
1499 switch (prev->state) {
1500 case ISP_PIPELINE_STREAM_SINGLESHOT:
1501 if (isp_pipeline_ready(pipe))
1502 omap3isp_pipeline_set_stream(pipe,
1503 ISP_PIPELINE_STREAM_SINGLESHOT);
1504 break;
1505
1506 case ISP_PIPELINE_STREAM_CONTINUOUS:
1507 /* If an underrun occurs, the video queue operation handler will
1508 * restart the preview engine. Otherwise restart it immediately.
1509 */
1510 if (restart)
1511 preview_enable_oneshot(prev);
1512 break;
1513
1514 case ISP_PIPELINE_STREAM_STOPPED:
1515 default:
1516 return;
1517 }
1518 }
1519
1520 /*
1521 * omap3isp_preview_isr - ISP preview engine interrupt handler
1522 *
1523 * Manage the preview engine video buffers and configure shadowed registers.
1524 */
1525 void omap3isp_preview_isr(struct isp_prev_device *prev)
1526 {
1527 unsigned long flags;
1528 u32 update;
1529 u32 active;
1530
1531 if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping))
1532 return;
1533
1534 spin_lock_irqsave(&prev->params.lock, flags);
1535 preview_params_switch(prev);
1536 update = preview_params_lock(prev, 0, false);
1537 active = prev->params.active;
1538 spin_unlock_irqrestore(&prev->params.lock, flags);
1539
1540 preview_setup_hw(prev, update, active);
1541 preview_config_input_size(prev, active);
1542
1543 if (prev->input == PREVIEW_INPUT_MEMORY ||
1544 prev->output & PREVIEW_OUTPUT_MEMORY)
1545 preview_isr_buffer(prev);
1546 else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS)
1547 preview_enable_oneshot(prev);
1548
1549 spin_lock_irqsave(&prev->params.lock, flags);
1550 preview_params_unlock(prev, update, false);
1551 spin_unlock_irqrestore(&prev->params.lock, flags);
1552 }
1553
1554 /* -----------------------------------------------------------------------------
1555 * ISP video operations
1556 */
1557
1558 static int preview_video_queue(struct isp_video *video,
1559 struct isp_buffer *buffer)
1560 {
1561 struct isp_prev_device *prev = &video->isp->isp_prev;
1562
1563 if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
1564 preview_set_inaddr(prev, buffer->dma);
1565
1566 if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
1567 preview_set_outaddr(prev, buffer->dma);
1568
1569 return 0;
1570 }
1571
1572 static const struct isp_video_operations preview_video_ops = {
1573 .queue = preview_video_queue,
1574 };
1575
1576 /* -----------------------------------------------------------------------------
1577 * V4L2 subdev operations
1578 */
1579
1580 /*
1581 * preview_s_ctrl - Handle set control subdev method
1582 * @ctrl: pointer to v4l2 control structure
1583 */
1584 static int preview_s_ctrl(struct v4l2_ctrl *ctrl)
1585 {
1586 struct isp_prev_device *prev =
1587 container_of(ctrl->handler, struct isp_prev_device, ctrls);
1588
1589 switch (ctrl->id) {
1590 case V4L2_CID_BRIGHTNESS:
1591 preview_update_brightness(prev, ctrl->val);
1592 break;
1593 case V4L2_CID_CONTRAST:
1594 preview_update_contrast(prev, ctrl->val);
1595 break;
1596 }
1597
1598 return 0;
1599 }
1600
1601 static const struct v4l2_ctrl_ops preview_ctrl_ops = {
1602 .s_ctrl = preview_s_ctrl,
1603 };
1604
1605 /*
1606 * preview_ioctl - Handle preview module private ioctl's
1607 * @sd: pointer to v4l2 subdev structure
1608 * @cmd: configuration command
1609 * @arg: configuration argument
1610 * return -EINVAL or zero on success
1611 */
1612 static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
1613 {
1614 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1615
1616 switch (cmd) {
1617 case VIDIOC_OMAP3ISP_PRV_CFG:
1618 return preview_config(prev, arg);
1619
1620 default:
1621 return -ENOIOCTLCMD;
1622 }
1623 }
1624
1625 /*
1626 * preview_set_stream - Enable/Disable streaming on preview subdev
1627 * @sd : pointer to v4l2 subdev structure
1628 * @enable: 1 == Enable, 0 == Disable
1629 * return -EINVAL or zero on success
1630 */
1631 static int preview_set_stream(struct v4l2_subdev *sd, int enable)
1632 {
1633 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1634 struct isp_video *video_out = &prev->video_out;
1635 struct isp_device *isp = to_isp_device(prev);
1636 struct device *dev = to_device(prev);
1637
1638 if (prev->state == ISP_PIPELINE_STREAM_STOPPED) {
1639 if (enable == ISP_PIPELINE_STREAM_STOPPED)
1640 return 0;
1641
1642 omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
1643 preview_configure(prev);
1644 atomic_set(&prev->stopping, 0);
1645 preview_print_status(prev);
1646 }
1647
1648 switch (enable) {
1649 case ISP_PIPELINE_STREAM_CONTINUOUS:
1650 if (prev->output & PREVIEW_OUTPUT_MEMORY)
1651 omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
1652
1653 if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED ||
1654 !(prev->output & PREVIEW_OUTPUT_MEMORY))
1655 preview_enable_oneshot(prev);
1656
1657 isp_video_dmaqueue_flags_clr(video_out);
1658 break;
1659
1660 case ISP_PIPELINE_STREAM_SINGLESHOT:
1661 if (prev->input == PREVIEW_INPUT_MEMORY)
1662 omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
1663 if (prev->output & PREVIEW_OUTPUT_MEMORY)
1664 omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
1665
1666 preview_enable_oneshot(prev);
1667 break;
1668
1669 case ISP_PIPELINE_STREAM_STOPPED:
1670 if (omap3isp_module_sync_idle(&sd->entity, &prev->wait,
1671 &prev->stopping))
1672 dev_dbg(dev, "%s: stop timeout.\n", sd->name);
1673 omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
1674 omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
1675 omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
1676 isp_video_dmaqueue_flags_clr(video_out);
1677 break;
1678 }
1679
1680 prev->state = enable;
1681 return 0;
1682 }
1683
1684 static struct v4l2_mbus_framefmt *
1685 __preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_pad_config *cfg,
1686 unsigned int pad, enum v4l2_subdev_format_whence which)
1687 {
1688 if (which == V4L2_SUBDEV_FORMAT_TRY)
1689 return v4l2_subdev_get_try_format(&prev->subdev, cfg, pad);
1690 else
1691 return &prev->formats[pad];
1692 }
1693
1694 static struct v4l2_rect *
1695 __preview_get_crop(struct isp_prev_device *prev, struct v4l2_subdev_pad_config *cfg,
1696 enum v4l2_subdev_format_whence which)
1697 {
1698 if (which == V4L2_SUBDEV_FORMAT_TRY)
1699 return v4l2_subdev_get_try_crop(&prev->subdev, cfg, PREV_PAD_SINK);
1700 else
1701 return &prev->crop;
1702 }
1703
1704 /* previewer format descriptions */
1705 static const unsigned int preview_input_fmts[] = {
1706 MEDIA_BUS_FMT_Y8_1X8,
1707 MEDIA_BUS_FMT_SGRBG8_1X8,
1708 MEDIA_BUS_FMT_SRGGB8_1X8,
1709 MEDIA_BUS_FMT_SBGGR8_1X8,
1710 MEDIA_BUS_FMT_SGBRG8_1X8,
1711 MEDIA_BUS_FMT_Y10_1X10,
1712 MEDIA_BUS_FMT_SGRBG10_1X10,
1713 MEDIA_BUS_FMT_SRGGB10_1X10,
1714 MEDIA_BUS_FMT_SBGGR10_1X10,
1715 MEDIA_BUS_FMT_SGBRG10_1X10,
1716 };
1717
1718 static const unsigned int preview_output_fmts[] = {
1719 MEDIA_BUS_FMT_UYVY8_1X16,
1720 MEDIA_BUS_FMT_YUYV8_1X16,
1721 };
1722
1723 /*
1724 * preview_try_format - Validate a format
1725 * @prev: ISP preview engine
1726 * @cfg: V4L2 subdev pad configuration
1727 * @pad: pad number
1728 * @fmt: format to be validated
1729 * @which: try/active format selector
1730 *
1731 * Validate and adjust the given format for the given pad based on the preview
1732 * engine limits and the format and crop rectangles on other pads.
1733 */
1734 static void preview_try_format(struct isp_prev_device *prev,
1735 struct v4l2_subdev_pad_config *cfg, unsigned int pad,
1736 struct v4l2_mbus_framefmt *fmt,
1737 enum v4l2_subdev_format_whence which)
1738 {
1739 u32 pixelcode;
1740 struct v4l2_rect *crop;
1741 unsigned int i;
1742
1743 switch (pad) {
1744 case PREV_PAD_SINK:
1745 /* When reading data from the CCDC, the input size has already
1746 * been mangled by the CCDC output pad so it can be accepted
1747 * as-is.
1748 *
1749 * When reading data from memory, clamp the requested width and
1750 * height. The TRM doesn't specify a minimum input height, make
1751 * sure we got enough lines to enable the noise filter and color
1752 * filter array interpolation.
1753 */
1754 if (prev->input == PREVIEW_INPUT_MEMORY) {
1755 fmt->width = clamp_t(u32, fmt->width, PREV_MIN_IN_WIDTH,
1756 preview_max_out_width(prev));
1757 fmt->height = clamp_t(u32, fmt->height,
1758 PREV_MIN_IN_HEIGHT,
1759 PREV_MAX_IN_HEIGHT);
1760 }
1761
1762 fmt->colorspace = V4L2_COLORSPACE_SRGB;
1763
1764 for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) {
1765 if (fmt->code == preview_input_fmts[i])
1766 break;
1767 }
1768
1769 /* If not found, use SGRBG10 as default */
1770 if (i >= ARRAY_SIZE(preview_input_fmts))
1771 fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
1772 break;
1773
1774 case PREV_PAD_SOURCE:
1775 pixelcode = fmt->code;
1776 *fmt = *__preview_get_format(prev, cfg, PREV_PAD_SINK, which);
1777
1778 switch (pixelcode) {
1779 case MEDIA_BUS_FMT_YUYV8_1X16:
1780 case MEDIA_BUS_FMT_UYVY8_1X16:
1781 fmt->code = pixelcode;
1782 break;
1783
1784 default:
1785 fmt->code = MEDIA_BUS_FMT_YUYV8_1X16;
1786 break;
1787 }
1788
1789 /* The preview module output size is configurable through the
1790 * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This
1791 * is not supported yet, hardcode the output size to the crop
1792 * rectangle size.
1793 */
1794 crop = __preview_get_crop(prev, cfg, which);
1795 fmt->width = crop->width;
1796 fmt->height = crop->height;
1797
1798 fmt->colorspace = V4L2_COLORSPACE_JPEG;
1799 break;
1800 }
1801
1802 fmt->field = V4L2_FIELD_NONE;
1803 }
1804
1805 /*
1806 * preview_try_crop - Validate a crop rectangle
1807 * @prev: ISP preview engine
1808 * @sink: format on the sink pad
1809 * @crop: crop rectangle to be validated
1810 *
1811 * The preview engine crops lines and columns for its internal operation,
1812 * depending on which filters are enabled. Enforce minimum crop margins to
1813 * handle that transparently for userspace.
1814 *
1815 * See the explanation at the PREV_MARGIN_* definitions for more details.
1816 */
1817 static void preview_try_crop(struct isp_prev_device *prev,
1818 const struct v4l2_mbus_framefmt *sink,
1819 struct v4l2_rect *crop)
1820 {
1821 unsigned int left = PREV_MARGIN_LEFT;
1822 unsigned int right = sink->width - PREV_MARGIN_RIGHT;
1823 unsigned int top = PREV_MARGIN_TOP;
1824 unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM;
1825
1826 /* When processing data on-the-fly from the CCDC, at least 2 pixels must
1827 * be cropped from the left and right sides of the image. As we don't
1828 * know which filters will be enabled, increase the left and right
1829 * margins by two.
1830 */
1831 if (prev->input == PREVIEW_INPUT_CCDC) {
1832 left += 2;
1833 right -= 2;
1834 }
1835
1836 /* The CFA filter crops 4 lines and 4 columns in Bayer mode, and 2 lines
1837 * and no columns in other modes. Increase the margins based on the sink
1838 * format.
1839 */
1840 if (sink->code != MEDIA_BUS_FMT_Y8_1X8 &&
1841 sink->code != MEDIA_BUS_FMT_Y10_1X10) {
1842 left += 2;
1843 right -= 2;
1844 top += 2;
1845 bottom -= 2;
1846 }
1847
1848 /* Restrict left/top to even values to keep the Bayer pattern. */
1849 crop->left &= ~1;
1850 crop->top &= ~1;
1851
1852 crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH);
1853 crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT);
1854 crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH,
1855 right - crop->left);
1856 crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT,
1857 bottom - crop->top);
1858 }
1859
1860 /*
1861 * preview_enum_mbus_code - Handle pixel format enumeration
1862 * @sd : pointer to v4l2 subdev structure
1863 * @cfg: V4L2 subdev pad configuration
1864 * @code : pointer to v4l2_subdev_mbus_code_enum structure
1865 * return -EINVAL or zero on success
1866 */
1867 static int preview_enum_mbus_code(struct v4l2_subdev *sd,
1868 struct v4l2_subdev_pad_config *cfg,
1869 struct v4l2_subdev_mbus_code_enum *code)
1870 {
1871 switch (code->pad) {
1872 case PREV_PAD_SINK:
1873 if (code->index >= ARRAY_SIZE(preview_input_fmts))
1874 return -EINVAL;
1875
1876 code->code = preview_input_fmts[code->index];
1877 break;
1878 case PREV_PAD_SOURCE:
1879 if (code->index >= ARRAY_SIZE(preview_output_fmts))
1880 return -EINVAL;
1881
1882 code->code = preview_output_fmts[code->index];
1883 break;
1884 default:
1885 return -EINVAL;
1886 }
1887
1888 return 0;
1889 }
1890
1891 static int preview_enum_frame_size(struct v4l2_subdev *sd,
1892 struct v4l2_subdev_pad_config *cfg,
1893 struct v4l2_subdev_frame_size_enum *fse)
1894 {
1895 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1896 struct v4l2_mbus_framefmt format;
1897
1898 if (fse->index != 0)
1899 return -EINVAL;
1900
1901 format.code = fse->code;
1902 format.width = 1;
1903 format.height = 1;
1904 preview_try_format(prev, cfg, fse->pad, &format, fse->which);
1905 fse->min_width = format.width;
1906 fse->min_height = format.height;
1907
1908 if (format.code != fse->code)
1909 return -EINVAL;
1910
1911 format.code = fse->code;
1912 format.width = -1;
1913 format.height = -1;
1914 preview_try_format(prev, cfg, fse->pad, &format, fse->which);
1915 fse->max_width = format.width;
1916 fse->max_height = format.height;
1917
1918 return 0;
1919 }
1920
1921 /*
1922 * preview_get_selection - Retrieve a selection rectangle on a pad
1923 * @sd: ISP preview V4L2 subdevice
1924 * @cfg: V4L2 subdev pad configuration
1925 * @sel: Selection rectangle
1926 *
1927 * The only supported rectangles are the crop rectangles on the sink pad.
1928 *
1929 * Return 0 on success or a negative error code otherwise.
1930 */
1931 static int preview_get_selection(struct v4l2_subdev *sd,
1932 struct v4l2_subdev_pad_config *cfg,
1933 struct v4l2_subdev_selection *sel)
1934 {
1935 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1936 struct v4l2_mbus_framefmt *format;
1937
1938 if (sel->pad != PREV_PAD_SINK)
1939 return -EINVAL;
1940
1941 switch (sel->target) {
1942 case V4L2_SEL_TGT_CROP_BOUNDS:
1943 sel->r.left = 0;
1944 sel->r.top = 0;
1945 sel->r.width = INT_MAX;
1946 sel->r.height = INT_MAX;
1947
1948 format = __preview_get_format(prev, cfg, PREV_PAD_SINK,
1949 sel->which);
1950 preview_try_crop(prev, format, &sel->r);
1951 break;
1952
1953 case V4L2_SEL_TGT_CROP:
1954 sel->r = *__preview_get_crop(prev, cfg, sel->which);
1955 break;
1956
1957 default:
1958 return -EINVAL;
1959 }
1960
1961 return 0;
1962 }
1963
1964 /*
1965 * preview_set_selection - Set a selection rectangle on a pad
1966 * @sd: ISP preview V4L2 subdevice
1967 * @cfg: V4L2 subdev pad configuration
1968 * @sel: Selection rectangle
1969 *
1970 * The only supported rectangle is the actual crop rectangle on the sink pad.
1971 *
1972 * Return 0 on success or a negative error code otherwise.
1973 */
1974 static int preview_set_selection(struct v4l2_subdev *sd,
1975 struct v4l2_subdev_pad_config *cfg,
1976 struct v4l2_subdev_selection *sel)
1977 {
1978 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
1979 struct v4l2_mbus_framefmt *format;
1980
1981 if (sel->target != V4L2_SEL_TGT_CROP ||
1982 sel->pad != PREV_PAD_SINK)
1983 return -EINVAL;
1984
1985 /* The crop rectangle can't be changed while streaming. */
1986 if (prev->state != ISP_PIPELINE_STREAM_STOPPED)
1987 return -EBUSY;
1988
1989 /* Modifying the crop rectangle always changes the format on the source
1990 * pad. If the KEEP_CONFIG flag is set, just return the current crop
1991 * rectangle.
1992 */
1993 if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
1994 sel->r = *__preview_get_crop(prev, cfg, sel->which);
1995 return 0;
1996 }
1997
1998 format = __preview_get_format(prev, cfg, PREV_PAD_SINK, sel->which);
1999 preview_try_crop(prev, format, &sel->r);
2000 *__preview_get_crop(prev, cfg, sel->which) = sel->r;
2001
2002 /* Update the source format. */
2003 format = __preview_get_format(prev, cfg, PREV_PAD_SOURCE, sel->which);
2004 preview_try_format(prev, cfg, PREV_PAD_SOURCE, format, sel->which);
2005
2006 return 0;
2007 }
2008
2009 /*
2010 * preview_get_format - Handle get format by pads subdev method
2011 * @sd : pointer to v4l2 subdev structure
2012 * @cfg: V4L2 subdev pad configuration
2013 * @fmt: pointer to v4l2 subdev format structure
2014 * return -EINVAL or zero on success
2015 */
2016 static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
2017 struct v4l2_subdev_format *fmt)
2018 {
2019 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
2020 struct v4l2_mbus_framefmt *format;
2021
2022 format = __preview_get_format(prev, cfg, fmt->pad, fmt->which);
2023 if (format == NULL)
2024 return -EINVAL;
2025
2026 fmt->format = *format;
2027 return 0;
2028 }
2029
2030 /*
2031 * preview_set_format - Handle set format by pads subdev method
2032 * @sd : pointer to v4l2 subdev structure
2033 * @cfg: V4L2 subdev pad configuration
2034 * @fmt: pointer to v4l2 subdev format structure
2035 * return -EINVAL or zero on success
2036 */
2037 static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
2038 struct v4l2_subdev_format *fmt)
2039 {
2040 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
2041 struct v4l2_mbus_framefmt *format;
2042 struct v4l2_rect *crop;
2043
2044 format = __preview_get_format(prev, cfg, fmt->pad, fmt->which);
2045 if (format == NULL)
2046 return -EINVAL;
2047
2048 preview_try_format(prev, cfg, fmt->pad, &fmt->format, fmt->which);
2049 *format = fmt->format;
2050
2051 /* Propagate the format from sink to source */
2052 if (fmt->pad == PREV_PAD_SINK) {
2053 /* Reset the crop rectangle. */
2054 crop = __preview_get_crop(prev, cfg, fmt->which);
2055 crop->left = 0;
2056 crop->top = 0;
2057 crop->width = fmt->format.width;
2058 crop->height = fmt->format.height;
2059
2060 preview_try_crop(prev, &fmt->format, crop);
2061
2062 /* Update the source format. */
2063 format = __preview_get_format(prev, cfg, PREV_PAD_SOURCE,
2064 fmt->which);
2065 preview_try_format(prev, cfg, PREV_PAD_SOURCE, format,
2066 fmt->which);
2067 }
2068
2069 return 0;
2070 }
2071
2072 /*
2073 * preview_init_formats - Initialize formats on all pads
2074 * @sd: ISP preview V4L2 subdevice
2075 * @fh: V4L2 subdev file handle
2076 *
2077 * Initialize all pad formats with default values. If fh is not NULL, try
2078 * formats are initialized on the file handle. Otherwise active formats are
2079 * initialized on the device.
2080 */
2081 static int preview_init_formats(struct v4l2_subdev *sd,
2082 struct v4l2_subdev_fh *fh)
2083 {
2084 struct v4l2_subdev_format format;
2085
2086 memset(&format, 0, sizeof(format));
2087 format.pad = PREV_PAD_SINK;
2088 format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
2089 format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
2090 format.format.width = 4096;
2091 format.format.height = 4096;
2092 preview_set_format(sd, fh ? fh->pad : NULL, &format);
2093
2094 return 0;
2095 }
2096
2097 /* subdev core operations */
2098 static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = {
2099 .ioctl = preview_ioctl,
2100 };
2101
2102 /* subdev video operations */
2103 static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = {
2104 .s_stream = preview_set_stream,
2105 };
2106
2107 /* subdev pad operations */
2108 static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = {
2109 .enum_mbus_code = preview_enum_mbus_code,
2110 .enum_frame_size = preview_enum_frame_size,
2111 .get_fmt = preview_get_format,
2112 .set_fmt = preview_set_format,
2113 .get_selection = preview_get_selection,
2114 .set_selection = preview_set_selection,
2115 };
2116
2117 /* subdev operations */
2118 static const struct v4l2_subdev_ops preview_v4l2_ops = {
2119 .core = &preview_v4l2_core_ops,
2120 .video = &preview_v4l2_video_ops,
2121 .pad = &preview_v4l2_pad_ops,
2122 };
2123
2124 /* subdev internal operations */
2125 static const struct v4l2_subdev_internal_ops preview_v4l2_internal_ops = {
2126 .open = preview_init_formats,
2127 };
2128
2129 /* -----------------------------------------------------------------------------
2130 * Media entity operations
2131 */
2132
2133 /*
2134 * preview_link_setup - Setup previewer connections.
2135 * @entity : Pointer to media entity structure
2136 * @local : Pointer to local pad array
2137 * @remote : Pointer to remote pad array
2138 * @flags : Link flags
2139 * return -EINVAL or zero on success
2140 */
2141 static int preview_link_setup(struct media_entity *entity,
2142 const struct media_pad *local,
2143 const struct media_pad *remote, u32 flags)
2144 {
2145 struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
2146 struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
2147 unsigned int index = local->index;
2148
2149 /* FIXME: this is actually a hack! */
2150 if (is_media_entity_v4l2_subdev(remote->entity))
2151 index |= 2 << 16;
2152
2153 switch (index) {
2154 case PREV_PAD_SINK:
2155 /* read from memory */
2156 if (flags & MEDIA_LNK_FL_ENABLED) {
2157 if (prev->input == PREVIEW_INPUT_CCDC)
2158 return -EBUSY;
2159 prev->input = PREVIEW_INPUT_MEMORY;
2160 } else {
2161 if (prev->input == PREVIEW_INPUT_MEMORY)
2162 prev->input = PREVIEW_INPUT_NONE;
2163 }
2164 break;
2165
2166 case PREV_PAD_SINK | 2 << 16:
2167 /* read from ccdc */
2168 if (flags & MEDIA_LNK_FL_ENABLED) {
2169 if (prev->input == PREVIEW_INPUT_MEMORY)
2170 return -EBUSY;
2171 prev->input = PREVIEW_INPUT_CCDC;
2172 } else {
2173 if (prev->input == PREVIEW_INPUT_CCDC)
2174 prev->input = PREVIEW_INPUT_NONE;
2175 }
2176 break;
2177
2178 /*
2179 * The ISP core doesn't support pipelines with multiple video outputs.
2180 * Revisit this when it will be implemented, and return -EBUSY for now.
2181 */
2182
2183 case PREV_PAD_SOURCE:
2184 /* write to memory */
2185 if (flags & MEDIA_LNK_FL_ENABLED) {
2186 if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
2187 return -EBUSY;
2188 prev->output |= PREVIEW_OUTPUT_MEMORY;
2189 } else {
2190 prev->output &= ~PREVIEW_OUTPUT_MEMORY;
2191 }
2192 break;
2193
2194 case PREV_PAD_SOURCE | 2 << 16:
2195 /* write to resizer */
2196 if (flags & MEDIA_LNK_FL_ENABLED) {
2197 if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
2198 return -EBUSY;
2199 prev->output |= PREVIEW_OUTPUT_RESIZER;
2200 } else {
2201 prev->output &= ~PREVIEW_OUTPUT_RESIZER;
2202 }
2203 break;
2204
2205 default:
2206 return -EINVAL;
2207 }
2208
2209 return 0;
2210 }
2211
2212 /* media operations */
2213 static const struct media_entity_operations preview_media_ops = {
2214 .link_setup = preview_link_setup,
2215 .link_validate = v4l2_subdev_link_validate,
2216 };
2217
2218 void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
2219 {
2220 v4l2_device_unregister_subdev(&prev->subdev);
2221 omap3isp_video_unregister(&prev->video_in);
2222 omap3isp_video_unregister(&prev->video_out);
2223 }
2224
2225 int omap3isp_preview_register_entities(struct isp_prev_device *prev,
2226 struct v4l2_device *vdev)
2227 {
2228 int ret;
2229
2230 /* Register the subdev and video nodes. */
2231 ret = v4l2_device_register_subdev(vdev, &prev->subdev);
2232 if (ret < 0)
2233 goto error;
2234
2235 ret = omap3isp_video_register(&prev->video_in, vdev);
2236 if (ret < 0)
2237 goto error;
2238
2239 ret = omap3isp_video_register(&prev->video_out, vdev);
2240 if (ret < 0)
2241 goto error;
2242
2243 return 0;
2244
2245 error:
2246 omap3isp_preview_unregister_entities(prev);
2247 return ret;
2248 }
2249
2250 /* -----------------------------------------------------------------------------
2251 * ISP previewer initialisation and cleanup
2252 */
2253
2254 /*
2255 * preview_init_entities - Initialize subdev and media entity.
2256 * @prev : Pointer to preview structure
2257 * return -ENOMEM or zero on success
2258 */
2259 static int preview_init_entities(struct isp_prev_device *prev)
2260 {
2261 struct v4l2_subdev *sd = &prev->subdev;
2262 struct media_pad *pads = prev->pads;
2263 struct media_entity *me = &sd->entity;
2264 int ret;
2265
2266 prev->input = PREVIEW_INPUT_NONE;
2267
2268 v4l2_subdev_init(sd, &preview_v4l2_ops);
2269 sd->internal_ops = &preview_v4l2_internal_ops;
2270 strlcpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name));
2271 sd->grp_id = 1 << 16; /* group ID for isp subdevs */
2272 v4l2_set_subdevdata(sd, prev);
2273 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
2274
2275 v4l2_ctrl_handler_init(&prev->ctrls, 2);
2276 v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS,
2277 ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH,
2278 ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF);
2279 v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST,
2280 ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH,
2281 ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF);
2282 v4l2_ctrl_handler_setup(&prev->ctrls);
2283 sd->ctrl_handler = &prev->ctrls;
2284
2285 pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_SINK
2286 | MEDIA_PAD_FL_MUST_CONNECT;
2287 pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
2288
2289 me->ops = &preview_media_ops;
2290 ret = media_entity_pads_init(me, PREV_PADS_NUM, pads);
2291 if (ret < 0)
2292 return ret;
2293
2294 preview_init_formats(sd, NULL);
2295
2296 /* According to the OMAP34xx TRM, video buffers need to be aligned on a
2297 * 32 bytes boundary. However, an undocumented hardware bug requires a
2298 * 64 bytes boundary at the preview engine input.
2299 */
2300 prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
2301 prev->video_in.ops = &preview_video_ops;
2302 prev->video_in.isp = to_isp_device(prev);
2303 prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
2304 prev->video_in.bpl_alignment = 64;
2305 prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
2306 prev->video_out.ops = &preview_video_ops;
2307 prev->video_out.isp = to_isp_device(prev);
2308 prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
2309 prev->video_out.bpl_alignment = 32;
2310
2311 ret = omap3isp_video_init(&prev->video_in, "preview");
2312 if (ret < 0)
2313 goto error_video_in;
2314
2315 ret = omap3isp_video_init(&prev->video_out, "preview");
2316 if (ret < 0)
2317 goto error_video_out;
2318
2319 return 0;
2320
2321 error_video_out:
2322 omap3isp_video_cleanup(&prev->video_in);
2323 error_video_in:
2324 media_entity_cleanup(&prev->subdev.entity);
2325 return ret;
2326 }
2327
2328 /*
2329 * omap3isp_preview_init - Previewer initialization.
2330 * @isp : Pointer to ISP device
2331 * return -ENOMEM or zero on success
2332 */
2333 int omap3isp_preview_init(struct isp_device *isp)
2334 {
2335 struct isp_prev_device *prev = &isp->isp_prev;
2336
2337 init_waitqueue_head(&prev->wait);
2338
2339 preview_init_params(prev);
2340
2341 return preview_init_entities(prev);
2342 }
2343
2344 void omap3isp_preview_cleanup(struct isp_device *isp)
2345 {
2346 struct isp_prev_device *prev = &isp->isp_prev;
2347
2348 v4l2_ctrl_handler_free(&prev->ctrls);
2349 omap3isp_video_cleanup(&prev->video_in);
2350 omap3isp_video_cleanup(&prev->video_out);
2351 media_entity_cleanup(&prev->subdev.entity);
2352 }
Linux kernel - Deliverables
This page took 0.118295 seconds and 5 git commands to generate.