[media] v4l: vsp1: Add Cubic Look Up Table (CLU) support
[deliverable/linux.git] / drivers / media / platform / vsp1 / vsp1_entity.h
1 /*
2 * vsp1_entity.h -- R-Car VSP1 Base Entity
3 *
4 * Copyright (C) 2013-2014 Renesas Electronics Corporation
5 *
6 * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13 #ifndef __VSP1_ENTITY_H__
14 #define __VSP1_ENTITY_H__
15
16 #include <linux/list.h>
17 #include <linux/spinlock.h>
18
19 #include <media/v4l2-subdev.h>
20
21 struct vsp1_device;
22 struct vsp1_dl_list;
23 struct vsp1_pipeline;
24
25 enum vsp1_entity_type {
26 VSP1_ENTITY_BRU,
27 VSP1_ENTITY_CLU,
28 VSP1_ENTITY_HSI,
29 VSP1_ENTITY_HST,
30 VSP1_ENTITY_LIF,
31 VSP1_ENTITY_LUT,
32 VSP1_ENTITY_RPF,
33 VSP1_ENTITY_SRU,
34 VSP1_ENTITY_UDS,
35 VSP1_ENTITY_WPF,
36 };
37
38 #define VSP1_ENTITY_MAX_INPUTS 5 /* For the BRU */
39
40 /*
41 * struct vsp1_route - Entity routing configuration
42 * @type: Entity type this routing entry is associated with
43 * @index: Entity index this routing entry is associated with
44 * @reg: Output routing configuration register
45 * @inputs: Target node value for each input
46 * @output: Target node value for entity output
47 *
48 * Each $vsp1_route entry describes routing configuration for the entity
49 * specified by the entry's @type and @index. @reg indicates the register that
50 * holds output routing configuration for the entity, and the @inputs array
51 * store the target node value for each input of the entity. The @output field
52 * stores the target node value of the entity output when used as a source for
53 * histogram generation.
54 */
55 struct vsp1_route {
56 enum vsp1_entity_type type;
57 unsigned int index;
58 unsigned int reg;
59 unsigned int inputs[VSP1_ENTITY_MAX_INPUTS];
60 unsigned int output;
61 };
62
63 /**
64 * struct vsp1_entity_operations - Entity operations
65 * @destroy: Destroy the entity.
66 * @set_memory: Setup memory buffer access. This operation applies the settings
67 * stored in the rwpf mem field to the display list. Valid for RPF
68 * and WPF only.
69 * @configure: Setup the hardware based on the entity state (pipeline, formats,
70 * selection rectangles, ...)
71 */
72 struct vsp1_entity_operations {
73 void (*destroy)(struct vsp1_entity *);
74 void (*set_memory)(struct vsp1_entity *, struct vsp1_dl_list *dl);
75 void (*configure)(struct vsp1_entity *, struct vsp1_pipeline *,
76 struct vsp1_dl_list *);
77 };
78
79 struct vsp1_entity {
80 struct vsp1_device *vsp1;
81
82 const struct vsp1_entity_operations *ops;
83
84 enum vsp1_entity_type type;
85 unsigned int index;
86 const struct vsp1_route *route;
87
88 struct list_head list_dev;
89 struct list_head list_pipe;
90
91 struct media_pad *pads;
92 unsigned int source_pad;
93
94 struct media_entity *sink;
95 unsigned int sink_pad;
96
97 struct v4l2_subdev subdev;
98 struct v4l2_subdev_pad_config *config;
99 };
100
101 static inline struct vsp1_entity *to_vsp1_entity(struct v4l2_subdev *subdev)
102 {
103 return container_of(subdev, struct vsp1_entity, subdev);
104 }
105
106 int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
107 const char *name, unsigned int num_pads,
108 const struct v4l2_subdev_ops *ops, u32 function);
109 void vsp1_entity_destroy(struct vsp1_entity *entity);
110
111 extern const struct v4l2_subdev_internal_ops vsp1_subdev_internal_ops;
112
113 int vsp1_entity_link_setup(struct media_entity *entity,
114 const struct media_pad *local,
115 const struct media_pad *remote, u32 flags);
116
117 struct v4l2_subdev_pad_config *
118 vsp1_entity_get_pad_config(struct vsp1_entity *entity,
119 struct v4l2_subdev_pad_config *cfg,
120 enum v4l2_subdev_format_whence which);
121 struct v4l2_mbus_framefmt *
122 vsp1_entity_get_pad_format(struct vsp1_entity *entity,
123 struct v4l2_subdev_pad_config *cfg,
124 unsigned int pad);
125 struct v4l2_rect *
126 vsp1_entity_get_pad_selection(struct vsp1_entity *entity,
127 struct v4l2_subdev_pad_config *cfg,
128 unsigned int pad, unsigned int target);
129 int vsp1_entity_init_cfg(struct v4l2_subdev *subdev,
130 struct v4l2_subdev_pad_config *cfg);
131
132 void vsp1_entity_route_setup(struct vsp1_entity *source,
133 struct vsp1_dl_list *dl);
134
135 int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev,
136 struct v4l2_subdev_pad_config *cfg,
137 struct v4l2_subdev_format *fmt);
138 int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev,
139 struct v4l2_subdev_pad_config *cfg,
140 struct v4l2_subdev_mbus_code_enum *code,
141 const unsigned int *codes, unsigned int ncodes);
142 int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev,
143 struct v4l2_subdev_pad_config *cfg,
144 struct v4l2_subdev_frame_size_enum *fse,
145 unsigned int min_w, unsigned int min_h,
146 unsigned int max_w, unsigned int max_h);
147
148 #endif /* __VSP1_ENTITY_H__ */
This page took 0.03503 seconds and 6 git commands to generate.