drivers/media/platform/vsp1/vsp1_rpf.c

   1 /*
   2  * vsp1_rpf.c  --  R-Car VSP1 Read Pixel Formatter
   3  *
   4  * Copyright (C) 2013-2014 Renesas Electronics Corporation
   5  *
   6  * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  */
  13
  14 #include <linux/device.h>
  15
  16 #include <media/v4l2-subdev.h>
  17
  18 #include "vsp1.h"
  19 #include "vsp1_rwpf.h"
  20 #include "vsp1_video.h"
  21
  22 #define RPF_MAX_WIDTH                           8190
  23 #define RPF_MAX_HEIGHT                          8190
  24
  25 /* -----------------------------------------------------------------------------
  26  * Device Access
  27  */
  28
  29 static inline u32 vsp1_rpf_read(struct vsp1_rwpf *rpf, u32 reg)
  30 {
  31         return vsp1_read(rpf->entity.vsp1,
  32                          reg + rpf->entity.index * VI6_RPF_OFFSET);
  33 }
  34
  35 static inline void vsp1_rpf_write(struct vsp1_rwpf *rpf, u32 reg, u32 data)
  36 {
  37         vsp1_write(rpf->entity.vsp1,
  38                    reg + rpf->entity.index * VI6_RPF_OFFSET, data);
  39 }
  40
  41 /* -----------------------------------------------------------------------------
  42  * Controls
  43  */
  44
  45 static int rpf_s_ctrl(struct v4l2_ctrl *ctrl)
  46 {
  47         struct vsp1_rwpf *rpf =
  48                 container_of(ctrl->handler, struct vsp1_rwpf, ctrls);
  49         struct vsp1_pipeline *pipe;
  50
  51         if (!vsp1_entity_is_streaming(&rpf->entity))
  52                 return 0;
  53
  54         switch (ctrl->id) {
  55         case V4L2_CID_ALPHA_COMPONENT:
  56                 vsp1_rpf_write(rpf, VI6_RPF_VRTCOL_SET,
  57                                ctrl->val << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
  58
  59                 pipe = to_vsp1_pipeline(&rpf->entity.subdev.entity);
  60                 vsp1_pipeline_propagate_alpha(pipe, &rpf->entity, ctrl->val);
  61                 break;
  62         }
  63
  64         return 0;
  65 }
  66
  67 static const struct v4l2_ctrl_ops rpf_ctrl_ops = {
  68         .s_ctrl = rpf_s_ctrl,
  69 };
  70
  71 /* -----------------------------------------------------------------------------
  72  * V4L2 Subdevice Core Operations
  73  */
  74
  75 static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
  76 {
  77         struct vsp1_rwpf *rpf = to_rwpf(subdev);
  78         const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
  79         const struct v4l2_pix_format_mplane *format = &rpf->format;
  80         const struct v4l2_rect *crop = &rpf->crop;
  81         u32 pstride;
  82         u32 infmt;
  83         int ret;
  84
  85         ret = vsp1_entity_set_streaming(&rpf->entity, enable);
  86         if (ret < 0)
  87                 return ret;
  88
  89         if (!enable)
  90                 return 0;
  91
  92         /* Source size, stride and crop offsets.
  93          *
  94          * The crop offsets correspond to the location of the crop rectangle top
  95          * left corner in the plane buffer. Only two offsets are needed, as
  96          * planes 2 and 3 always have identical strides.
  97          */
  98         vsp1_rpf_write(rpf, VI6_RPF_SRC_BSIZE,
  99                        (crop->width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
 100                        (crop->height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
 101         vsp1_rpf_write(rpf, VI6_RPF_SRC_ESIZE,
 102                        (crop->width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
 103                        (crop->height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
 104
 105         rpf->offsets[0] = crop->top * format->plane_fmt[0].bytesperline
 106                         + crop->left * fmtinfo->bpp[0] / 8;
 107         pstride = format->plane_fmt[0].bytesperline
 108                 << VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
 109
 110         vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
 111                        rpf->buf_addr[0] + rpf->offsets[0]);
 112
 113         if (format->num_planes > 1) {
 114                 rpf->offsets[1] = crop->top * format->plane_fmt[1].bytesperline
 115                                 + crop->left * fmtinfo->bpp[1] / 8;
 116                 pstride |= format->plane_fmt[1].bytesperline
 117                         << VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
 118
 119                 vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
 120                                rpf->buf_addr[1] + rpf->offsets[1]);
 121
 122                 if (format->num_planes > 2)
 123                         vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
 124                                        rpf->buf_addr[2] + rpf->offsets[1]);
 125         }
 126
 127         vsp1_rpf_write(rpf, VI6_RPF_SRCM_PSTRIDE, pstride);
 128
 129         /* Format */
 130         infmt = VI6_RPF_INFMT_CIPM
 131               | (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
 132
 133         if (fmtinfo->swap_yc)
 134                 infmt |= VI6_RPF_INFMT_SPYCS;
 135         if (fmtinfo->swap_uv)
 136                 infmt |= VI6_RPF_INFMT_SPUVS;
 137
 138         if (rpf->entity.formats[RWPF_PAD_SINK].code !=
 139             rpf->entity.formats[RWPF_PAD_SOURCE].code)
 140                 infmt |= VI6_RPF_INFMT_CSC;
 141
 142         vsp1_rpf_write(rpf, VI6_RPF_INFMT, infmt);
 143         vsp1_rpf_write(rpf, VI6_RPF_DSWAP, fmtinfo->swap);
 144
 145         /* Output location */
 146         vsp1_rpf_write(rpf, VI6_RPF_LOC,
 147                        (rpf->location.left << VI6_RPF_LOC_HCOORD_SHIFT) |
 148                        (rpf->location.top << VI6_RPF_LOC_VCOORD_SHIFT));
 149
 150         /* Use the alpha channel (extended to 8 bits) when available or an
 151          * alpha value set through the V4L2_CID_ALPHA_COMPONENT control
 152          * otherwise. Disable color keying.
 153          */
 154         vsp1_rpf_write(rpf, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT |
 155                        (fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED
 156                                        : VI6_RPF_ALPH_SEL_ASEL_FIXED));
 157         vsp1_rpf_write(rpf, VI6_RPF_MSK_CTRL, 0);
 158         vsp1_rpf_write(rpf, VI6_RPF_CKEY_CTRL, 0);
 159
 160         return 0;
 161 }
 162
 163 /* -----------------------------------------------------------------------------
 164  * V4L2 Subdevice Operations
 165  */
 166
 167 static struct v4l2_subdev_video_ops rpf_video_ops = {
 168         .s_stream = rpf_s_stream,
 169 };
 170
 171 static struct v4l2_subdev_pad_ops rpf_pad_ops = {
 172         .enum_mbus_code = vsp1_rwpf_enum_mbus_code,
 173         .enum_frame_size = vsp1_rwpf_enum_frame_size,
 174         .get_fmt = vsp1_rwpf_get_format,
 175         .set_fmt = vsp1_rwpf_set_format,
 176         .get_selection = vsp1_rwpf_get_selection,
 177         .set_selection = vsp1_rwpf_set_selection,
 178 };
 179
 180 static struct v4l2_subdev_ops rpf_ops = {
 181         .video  = &rpf_video_ops,
 182         .pad    = &rpf_pad_ops,
 183 };
 184
 185 /* -----------------------------------------------------------------------------
 186  * Video Device Operations
 187  */
 188
 189 static void rpf_buf_queue(struct vsp1_rwpf *rpf, struct vsp1_video_buffer *buf)
 190 {
 191         unsigned int i;
 192
 193         for (i = 0; i < 3; ++i)
 194                 rpf->buf_addr[i] = buf->addr[i];
 195
 196         if (!vsp1_entity_is_streaming(&rpf->entity))
 197                 return;
 198
 199         vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
 200                        buf->addr[0] + rpf->offsets[0]);
 201         if (buf->buf.vb2_buf.num_planes > 1)
 202                 vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
 203                                buf->addr[1] + rpf->offsets[1]);
 204         if (buf->buf.vb2_buf.num_planes > 2)
 205                 vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
 206                                buf->addr[2] + rpf->offsets[1]);
 207 }
 208
 209 static const struct vsp1_rwpf_operations rpf_vdev_ops = {
 210         .queue = rpf_buf_queue,
 211 };
 212
 213 /* -----------------------------------------------------------------------------
 214  * Initialization and Cleanup
 215  */
 216
 217 struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index)
 218 {
 219         struct v4l2_subdev *subdev;
 220         struct vsp1_video *video;
 221         struct vsp1_rwpf *rpf;
 222         int ret;
 223
 224         rpf = devm_kzalloc(vsp1->dev, sizeof(*rpf), GFP_KERNEL);
 225         if (rpf == NULL)
 226                 return ERR_PTR(-ENOMEM);
 227
 228         rpf->ops = &rpf_vdev_ops;
 229
 230         rpf->max_width = RPF_MAX_WIDTH;
 231         rpf->max_height = RPF_MAX_HEIGHT;
 232
 233         rpf->entity.type = VSP1_ENTITY_RPF;
 234         rpf->entity.index = index;
 235
 236         ret = vsp1_entity_init(vsp1, &rpf->entity, 2);
 237         if (ret < 0)
 238                 return ERR_PTR(ret);
 239
 240         /* Initialize the V4L2 subdev. */
 241         subdev = &rpf->entity.subdev;
 242         v4l2_subdev_init(subdev, &rpf_ops);
 243
 244         subdev->entity.ops = &vsp1_media_ops;
 245         subdev->internal_ops = &vsp1_subdev_internal_ops;
 246         snprintf(subdev->name, sizeof(subdev->name), "%s rpf.%u",
 247                  dev_name(vsp1->dev), index);
 248         v4l2_set_subdevdata(subdev, rpf);
 249         subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 250
 251         vsp1_entity_init_formats(subdev, NULL);
 252
 253         /* Initialize the control handler. */
 254         v4l2_ctrl_handler_init(&rpf->ctrls, 1);
 255         v4l2_ctrl_new_std(&rpf->ctrls, &rpf_ctrl_ops, V4L2_CID_ALPHA_COMPONENT,
 256                           0, 255, 1, 255);
 257
 258         rpf->entity.subdev.ctrl_handler = &rpf->ctrls;
 259
 260         if (rpf->ctrls.error) {
 261                 dev_err(vsp1->dev, "rpf%u: failed to initialize controls\n",
 262                         index);
 263                 ret = rpf->ctrls.error;
 264                 goto error;
 265         }
 266
 267         /* Initialize the video device. */
 268         video = &rpf->video;
 269
 270         video->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
 271         video->vsp1 = vsp1;
 272
 273         ret = vsp1_video_init(video, rpf);
 274         if (ret < 0)
 275                 goto error;
 276
 277         rpf->entity.video = video;
 278
 279         return rpf;
 280
 281 error:
 282         vsp1_entity_destroy(&rpf->entity);
 283         return ERR_PTR(ret);
 284 }