Merge branches 'pm-core', 'powercap' and 'pm-tools'
[deliverable/linux.git] / drivers / media / usb / cx231xx / cx231xx-dvb.c
1 /*
2 DVB device driver for cx231xx
3
4 Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
5 Based on em28xx driver
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22 #include "cx231xx.h"
23 #include <linux/kernel.h>
24 #include <linux/slab.h>
25
26 #include <media/v4l2-common.h>
27 #include <media/videobuf-vmalloc.h>
28 #include <media/tuner.h>
29
30 #include "xc5000.h"
31 #include "s5h1432.h"
32 #include "tda18271.h"
33 #include "s5h1411.h"
34 #include "lgdt3305.h"
35 #include "si2165.h"
36 #include "mb86a20s.h"
37 #include "si2157.h"
38 #include "lgdt3306a.h"
39
40 MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
41 MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
42 MODULE_LICENSE("GPL");
43
44 static unsigned int debug;
45 module_param(debug, int, 0644);
46 MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
47
48 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
49
50 #define CX231XX_DVB_NUM_BUFS 5
51 #define CX231XX_DVB_MAX_PACKETSIZE 564
52 #define CX231XX_DVB_MAX_PACKETS 64
53
54 struct cx231xx_dvb {
55 struct dvb_frontend *frontend;
56
57 /* feed count management */
58 struct mutex lock;
59 int nfeeds;
60
61 /* general boilerplate stuff */
62 struct dvb_adapter adapter;
63 struct dvb_demux demux;
64 struct dmxdev dmxdev;
65 struct dmx_frontend fe_hw;
66 struct dmx_frontend fe_mem;
67 struct dvb_net net;
68 struct i2c_client *i2c_client_tuner;
69 };
70
71 static struct s5h1432_config dvico_s5h1432_config = {
72 .output_mode = S5H1432_SERIAL_OUTPUT,
73 .gpio = S5H1432_GPIO_ON,
74 .qam_if = S5H1432_IF_4000,
75 .vsb_if = S5H1432_IF_4000,
76 .inversion = S5H1432_INVERSION_OFF,
77 .status_mode = S5H1432_DEMODLOCKING,
78 .mpeg_timing = S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
79 };
80
81 static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
82 .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
83 .if_lvl = 1, .rfagc_top = 0x37, },
84 .dvbt_7 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
85 .if_lvl = 1, .rfagc_top = 0x37, },
86 .dvbt_8 = { .if_freq = 4000, .agc_mode = 3, .std = 6,
87 .if_lvl = 1, .rfagc_top = 0x37, },
88 };
89
90 static struct tda18271_std_map mb86a20s_tda18271_config = {
91 .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
92 .if_lvl = 0, .rfagc_top = 0x37, },
93 };
94
95 static struct tda18271_config cnxt_rde253s_tunerconfig = {
96 .std_map = &cnxt_rde253s_tda18271_std_map,
97 .gate = TDA18271_GATE_ANALOG,
98 };
99
100 static struct s5h1411_config tda18271_s5h1411_config = {
101 .output_mode = S5H1411_SERIAL_OUTPUT,
102 .gpio = S5H1411_GPIO_OFF,
103 .vsb_if = S5H1411_IF_3250,
104 .qam_if = S5H1411_IF_4000,
105 .inversion = S5H1411_INVERSION_ON,
106 .status_mode = S5H1411_DEMODLOCKING,
107 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
108 };
109 static struct s5h1411_config xc5000_s5h1411_config = {
110 .output_mode = S5H1411_SERIAL_OUTPUT,
111 .gpio = S5H1411_GPIO_OFF,
112 .vsb_if = S5H1411_IF_3250,
113 .qam_if = S5H1411_IF_3250,
114 .inversion = S5H1411_INVERSION_OFF,
115 .status_mode = S5H1411_DEMODLOCKING,
116 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
117 };
118
119 static struct lgdt3305_config hcw_lgdt3305_config = {
120 .i2c_addr = 0x0e,
121 .mpeg_mode = LGDT3305_MPEG_SERIAL,
122 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
123 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
124 .deny_i2c_rptr = 1,
125 .spectral_inversion = 1,
126 .qam_if_khz = 4000,
127 .vsb_if_khz = 3250,
128 };
129
130 static struct tda18271_std_map hauppauge_tda18271_std_map = {
131 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
132 .if_lvl = 1, .rfagc_top = 0x58, },
133 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
134 .if_lvl = 1, .rfagc_top = 0x58, },
135 };
136
137 static struct tda18271_config hcw_tda18271_config = {
138 .std_map = &hauppauge_tda18271_std_map,
139 .gate = TDA18271_GATE_DIGITAL,
140 };
141
142 static const struct mb86a20s_config pv_mb86a20s_config = {
143 .demod_address = 0x10,
144 .is_serial = true,
145 };
146
147 static struct tda18271_config pv_tda18271_config = {
148 .std_map = &mb86a20s_tda18271_config,
149 .gate = TDA18271_GATE_DIGITAL,
150 .small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
151 };
152
153 static const struct si2165_config hauppauge_930C_HD_1113xx_si2165_config = {
154 .i2c_addr = 0x64,
155 .chip_mode = SI2165_MODE_PLL_XTAL,
156 .ref_freq_Hz = 16000000,
157 };
158
159 static const struct si2165_config pctv_quatro_stick_1114xx_si2165_config = {
160 .i2c_addr = 0x64,
161 .chip_mode = SI2165_MODE_PLL_EXT,
162 .ref_freq_Hz = 24000000,
163 };
164
165 static struct lgdt3306a_config hauppauge_955q_lgdt3306a_config = {
166 .i2c_addr = 0x59,
167 .qam_if_khz = 4000,
168 .vsb_if_khz = 3250,
169 .deny_i2c_rptr = 1,
170 .spectral_inversion = 1,
171 .mpeg_mode = LGDT3306A_MPEG_SERIAL,
172 .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
173 .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
174 .xtalMHz = 25,
175 };
176
177 static inline void print_err_status(struct cx231xx *dev, int packet, int status)
178 {
179 char *errmsg = "Unknown";
180
181 switch (status) {
182 case -ENOENT:
183 errmsg = "unlinked synchronuously";
184 break;
185 case -ECONNRESET:
186 errmsg = "unlinked asynchronuously";
187 break;
188 case -ENOSR:
189 errmsg = "Buffer error (overrun)";
190 break;
191 case -EPIPE:
192 errmsg = "Stalled (device not responding)";
193 break;
194 case -EOVERFLOW:
195 errmsg = "Babble (bad cable?)";
196 break;
197 case -EPROTO:
198 errmsg = "Bit-stuff error (bad cable?)";
199 break;
200 case -EILSEQ:
201 errmsg = "CRC/Timeout (could be anything)";
202 break;
203 case -ETIME:
204 errmsg = "Device does not respond";
205 break;
206 }
207 if (packet < 0) {
208 dev_dbg(dev->dev,
209 "URB status %d [%s].\n", status, errmsg);
210 } else {
211 dev_dbg(dev->dev,
212 "URB packet %d, status %d [%s].\n",
213 packet, status, errmsg);
214 }
215 }
216
217 static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb)
218 {
219 int i;
220
221 if (!dev)
222 return 0;
223
224 if (dev->state & DEV_DISCONNECTED)
225 return 0;
226
227 if (urb->status < 0) {
228 print_err_status(dev, -1, urb->status);
229 if (urb->status == -ENOENT)
230 return 0;
231 }
232
233 for (i = 0; i < urb->number_of_packets; i++) {
234 int status = urb->iso_frame_desc[i].status;
235
236 if (status < 0) {
237 print_err_status(dev, i, status);
238 if (urb->iso_frame_desc[i].status != -EPROTO)
239 continue;
240 }
241
242 dvb_dmx_swfilter(&dev->dvb->demux,
243 urb->transfer_buffer +
244 urb->iso_frame_desc[i].offset,
245 urb->iso_frame_desc[i].actual_length);
246 }
247
248 return 0;
249 }
250
251 static inline int dvb_bulk_copy(struct cx231xx *dev, struct urb *urb)
252 {
253 if (!dev)
254 return 0;
255
256 if (dev->state & DEV_DISCONNECTED)
257 return 0;
258
259 if (urb->status < 0) {
260 print_err_status(dev, -1, urb->status);
261 if (urb->status == -ENOENT)
262 return 0;
263 }
264
265 /* Feed the transport payload into the kernel demux */
266 dvb_dmx_swfilter(&dev->dvb->demux,
267 urb->transfer_buffer, urb->actual_length);
268
269 return 0;
270 }
271
272 static int start_streaming(struct cx231xx_dvb *dvb)
273 {
274 int rc;
275 struct cx231xx *dev = dvb->adapter.priv;
276
277 if (dev->USE_ISO) {
278 dev_dbg(dev->dev, "DVB transfer mode is ISO.\n");
279 cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
280 rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
281 if (rc < 0)
282 return rc;
283 dev->mode_tv = 1;
284 return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS,
285 CX231XX_DVB_NUM_BUFS,
286 dev->ts1_mode.max_pkt_size,
287 dvb_isoc_copy);
288 } else {
289 dev_dbg(dev->dev, "DVB transfer mode is BULK.\n");
290 cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
291 rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
292 if (rc < 0)
293 return rc;
294 dev->mode_tv = 1;
295 return cx231xx_init_bulk(dev, CX231XX_DVB_MAX_PACKETS,
296 CX231XX_DVB_NUM_BUFS,
297 dev->ts1_mode.max_pkt_size,
298 dvb_bulk_copy);
299 }
300
301 }
302
303 static int stop_streaming(struct cx231xx_dvb *dvb)
304 {
305 struct cx231xx *dev = dvb->adapter.priv;
306
307 if (dev->USE_ISO)
308 cx231xx_uninit_isoc(dev);
309 else
310 cx231xx_uninit_bulk(dev);
311
312 cx231xx_set_mode(dev, CX231XX_SUSPEND);
313
314 return 0;
315 }
316
317 static int start_feed(struct dvb_demux_feed *feed)
318 {
319 struct dvb_demux *demux = feed->demux;
320 struct cx231xx_dvb *dvb = demux->priv;
321 int rc, ret;
322
323 if (!demux->dmx.frontend)
324 return -EINVAL;
325
326 mutex_lock(&dvb->lock);
327 dvb->nfeeds++;
328 rc = dvb->nfeeds;
329
330 if (dvb->nfeeds == 1) {
331 ret = start_streaming(dvb);
332 if (ret < 0)
333 rc = ret;
334 }
335
336 mutex_unlock(&dvb->lock);
337 return rc;
338 }
339
340 static int stop_feed(struct dvb_demux_feed *feed)
341 {
342 struct dvb_demux *demux = feed->demux;
343 struct cx231xx_dvb *dvb = demux->priv;
344 int err = 0;
345
346 mutex_lock(&dvb->lock);
347 dvb->nfeeds--;
348
349 if (0 == dvb->nfeeds)
350 err = stop_streaming(dvb);
351
352 mutex_unlock(&dvb->lock);
353 return err;
354 }
355
356 /* ------------------------------------------------------------------ */
357 static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
358 {
359 struct cx231xx *dev = fe->dvb->priv;
360
361 if (acquire)
362 return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
363 else
364 return cx231xx_set_mode(dev, CX231XX_SUSPEND);
365 }
366
367 /* ------------------------------------------------------------------ */
368
369 static struct xc5000_config cnxt_rde250_tunerconfig = {
370 .i2c_address = 0x61,
371 .if_khz = 4000,
372 };
373 static struct xc5000_config cnxt_rdu250_tunerconfig = {
374 .i2c_address = 0x61,
375 .if_khz = 3250,
376 };
377
378 /* ------------------------------------------------------------------ */
379 #if 0
380 static int attach_xc5000(u8 addr, struct cx231xx *dev)
381 {
382
383 struct dvb_frontend *fe;
384 struct xc5000_config cfg;
385
386 memset(&cfg, 0, sizeof(cfg));
387 cfg.i2c_adap = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
388 cfg.i2c_addr = addr;
389
390 if (!dev->dvb->frontend) {
391 dev_err(dev->dev, "%s/2: dvb frontend not attached. "
392 "Can't attach xc5000\n", dev->name);
393 return -EINVAL;
394 }
395
396 fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
397 if (!fe) {
398 dev_err(dev->dev, "%s/2: xc5000 attach failed\n", dev->name);
399 dvb_frontend_detach(dev->dvb->frontend);
400 dev->dvb->frontend = NULL;
401 return -EINVAL;
402 }
403
404 dev_info(dev->dev, "%s/2: xc5000 attached\n", dev->name);
405
406 return 0;
407 }
408 #endif
409
410 int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq)
411 {
412 if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
413
414 struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
415
416 if (dops->set_analog_params != NULL) {
417 struct analog_parameters params;
418
419 params.frequency = freq;
420 params.std = dev->norm;
421 params.mode = 0; /* 0- Air; 1 - cable */
422 /*params.audmode = ; */
423
424 /* Set the analog parameters to set the frequency */
425 dops->set_analog_params(dev->dvb->frontend, &params);
426 }
427
428 }
429
430 return 0;
431 }
432
433 int cx231xx_reset_analog_tuner(struct cx231xx *dev)
434 {
435 int status = 0;
436
437 if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
438
439 struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
440
441 if (dops->init != NULL && !dev->xc_fw_load_done) {
442
443 dev_dbg(dev->dev,
444 "Reloading firmware for XC5000\n");
445 status = dops->init(dev->dvb->frontend);
446 if (status == 0) {
447 dev->xc_fw_load_done = 1;
448 dev_dbg(dev->dev,
449 "XC5000 firmware download completed\n");
450 } else {
451 dev->xc_fw_load_done = 0;
452 dev_dbg(dev->dev,
453 "XC5000 firmware download failed !!!\n");
454 }
455 }
456
457 }
458
459 return status;
460 }
461
462 /* ------------------------------------------------------------------ */
463
464 static int register_dvb(struct cx231xx_dvb *dvb,
465 struct module *module,
466 struct cx231xx *dev, struct device *device)
467 {
468 int result;
469
470 mutex_init(&dvb->lock);
471
472
473 /* register adapter */
474 result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
475 adapter_nr);
476 if (result < 0) {
477 dev_warn(dev->dev,
478 "%s: dvb_register_adapter failed (errno = %d)\n",
479 dev->name, result);
480 goto fail_adapter;
481 }
482 dvb_register_media_controller(&dvb->adapter, dev->media_dev);
483
484 /* Ensure all frontends negotiate bus access */
485 dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl;
486
487 dvb->adapter.priv = dev;
488
489 /* register frontend */
490 result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
491 if (result < 0) {
492 dev_warn(dev->dev,
493 "%s: dvb_register_frontend failed (errno = %d)\n",
494 dev->name, result);
495 goto fail_frontend;
496 }
497
498 /* register demux stuff */
499 dvb->demux.dmx.capabilities =
500 DMX_TS_FILTERING | DMX_SECTION_FILTERING |
501 DMX_MEMORY_BASED_FILTERING;
502 dvb->demux.priv = dvb;
503 dvb->demux.filternum = 256;
504 dvb->demux.feednum = 256;
505 dvb->demux.start_feed = start_feed;
506 dvb->demux.stop_feed = stop_feed;
507
508 result = dvb_dmx_init(&dvb->demux);
509 if (result < 0) {
510 dev_warn(dev->dev,
511 "%s: dvb_dmx_init failed (errno = %d)\n",
512 dev->name, result);
513 goto fail_dmx;
514 }
515
516 dvb->dmxdev.filternum = 256;
517 dvb->dmxdev.demux = &dvb->demux.dmx;
518 dvb->dmxdev.capabilities = 0;
519 result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
520 if (result < 0) {
521 dev_warn(dev->dev,
522 "%s: dvb_dmxdev_init failed (errno = %d)\n",
523 dev->name, result);
524 goto fail_dmxdev;
525 }
526
527 dvb->fe_hw.source = DMX_FRONTEND_0;
528 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
529 if (result < 0) {
530 dev_warn(dev->dev,
531 "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
532 dev->name, result);
533 goto fail_fe_hw;
534 }
535
536 dvb->fe_mem.source = DMX_MEMORY_FE;
537 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
538 if (result < 0) {
539 dev_warn(dev->dev,
540 "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
541 dev->name, result);
542 goto fail_fe_mem;
543 }
544
545 result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
546 if (result < 0) {
547 dev_warn(dev->dev,
548 "%s: connect_frontend failed (errno = %d)\n",
549 dev->name, result);
550 goto fail_fe_conn;
551 }
552
553 /* register network adapter */
554 dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
555 result = dvb_create_media_graph(&dvb->adapter,
556 dev->tuner_type == TUNER_ABSENT);
557 if (result < 0)
558 goto fail_create_graph;
559
560 return 0;
561
562 fail_create_graph:
563 dvb_net_release(&dvb->net);
564 fail_fe_conn:
565 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
566 fail_fe_mem:
567 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
568 fail_fe_hw:
569 dvb_dmxdev_release(&dvb->dmxdev);
570 fail_dmxdev:
571 dvb_dmx_release(&dvb->demux);
572 fail_dmx:
573 dvb_unregister_frontend(dvb->frontend);
574 fail_frontend:
575 dvb_frontend_detach(dvb->frontend);
576 dvb_unregister_adapter(&dvb->adapter);
577 fail_adapter:
578 return result;
579 }
580
581 static void unregister_dvb(struct cx231xx_dvb *dvb)
582 {
583 struct i2c_client *client;
584 dvb_net_release(&dvb->net);
585 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
586 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
587 dvb_dmxdev_release(&dvb->dmxdev);
588 dvb_dmx_release(&dvb->demux);
589 client = dvb->i2c_client_tuner;
590 /* remove I2C tuner */
591 if (client) {
592 module_put(client->dev.driver->owner);
593 i2c_unregister_device(client);
594 }
595 dvb_unregister_frontend(dvb->frontend);
596 dvb_frontend_detach(dvb->frontend);
597 dvb_unregister_adapter(&dvb->adapter);
598 }
599
600 static int dvb_init(struct cx231xx *dev)
601 {
602 int result = 0;
603 struct cx231xx_dvb *dvb;
604 struct i2c_adapter *tuner_i2c;
605 struct i2c_adapter *demod_i2c;
606
607 if (!dev->board.has_dvb) {
608 /* This device does not support the extension */
609 return 0;
610 }
611
612 dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
613
614 if (dvb == NULL) {
615 dev_info(dev->dev,
616 "cx231xx_dvb: memory allocation failed\n");
617 return -ENOMEM;
618 }
619 dev->dvb = dvb;
620 dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq;
621 dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner;
622
623 tuner_i2c = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
624 demod_i2c = cx231xx_get_i2c_adap(dev, dev->board.demod_i2c_master);
625 mutex_lock(&dev->lock);
626 cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
627 cx231xx_demod_reset(dev);
628 /* init frontend */
629 switch (dev->model) {
630 case CX231XX_BOARD_CNXT_CARRAERA:
631 case CX231XX_BOARD_CNXT_RDE_250:
632
633 dev->dvb->frontend = dvb_attach(s5h1432_attach,
634 &dvico_s5h1432_config,
635 demod_i2c);
636
637 if (dev->dvb->frontend == NULL) {
638 dev_err(dev->dev,
639 "Failed to attach s5h1432 front end\n");
640 result = -EINVAL;
641 goto out_free;
642 }
643
644 /* define general-purpose callback pointer */
645 dvb->frontend->callback = cx231xx_tuner_callback;
646
647 if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
648 tuner_i2c,
649 &cnxt_rde250_tunerconfig)) {
650 result = -EINVAL;
651 goto out_free;
652 }
653
654 break;
655 case CX231XX_BOARD_CNXT_SHELBY:
656 case CX231XX_BOARD_CNXT_RDU_250:
657
658 dev->dvb->frontend = dvb_attach(s5h1411_attach,
659 &xc5000_s5h1411_config,
660 demod_i2c);
661
662 if (dev->dvb->frontend == NULL) {
663 dev_err(dev->dev,
664 "Failed to attach s5h1411 front end\n");
665 result = -EINVAL;
666 goto out_free;
667 }
668
669 /* define general-purpose callback pointer */
670 dvb->frontend->callback = cx231xx_tuner_callback;
671
672 if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
673 tuner_i2c,
674 &cnxt_rdu250_tunerconfig)) {
675 result = -EINVAL;
676 goto out_free;
677 }
678 break;
679 case CX231XX_BOARD_CNXT_RDE_253S:
680
681 dev->dvb->frontend = dvb_attach(s5h1432_attach,
682 &dvico_s5h1432_config,
683 demod_i2c);
684
685 if (dev->dvb->frontend == NULL) {
686 dev_err(dev->dev,
687 "Failed to attach s5h1432 front end\n");
688 result = -EINVAL;
689 goto out_free;
690 }
691
692 /* define general-purpose callback pointer */
693 dvb->frontend->callback = cx231xx_tuner_callback;
694
695 if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
696 0x60, tuner_i2c,
697 &cnxt_rde253s_tunerconfig)) {
698 result = -EINVAL;
699 goto out_free;
700 }
701 break;
702 case CX231XX_BOARD_CNXT_RDU_253S:
703 case CX231XX_BOARD_KWORLD_UB445_USB_HYBRID:
704
705 dev->dvb->frontend = dvb_attach(s5h1411_attach,
706 &tda18271_s5h1411_config,
707 demod_i2c);
708
709 if (dev->dvb->frontend == NULL) {
710 dev_err(dev->dev,
711 "Failed to attach s5h1411 front end\n");
712 result = -EINVAL;
713 goto out_free;
714 }
715
716 /* define general-purpose callback pointer */
717 dvb->frontend->callback = cx231xx_tuner_callback;
718
719 if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
720 0x60, tuner_i2c,
721 &cnxt_rde253s_tunerconfig)) {
722 result = -EINVAL;
723 goto out_free;
724 }
725 break;
726 case CX231XX_BOARD_HAUPPAUGE_EXETER:
727
728 dev_info(dev->dev,
729 "%s: looking for tuner / demod on i2c bus: %d\n",
730 __func__, i2c_adapter_id(tuner_i2c));
731
732 dev->dvb->frontend = dvb_attach(lgdt3305_attach,
733 &hcw_lgdt3305_config,
734 demod_i2c);
735
736 if (dev->dvb->frontend == NULL) {
737 dev_err(dev->dev,
738 "Failed to attach LG3305 front end\n");
739 result = -EINVAL;
740 goto out_free;
741 }
742
743 /* define general-purpose callback pointer */
744 dvb->frontend->callback = cx231xx_tuner_callback;
745
746 dvb_attach(tda18271_attach, dev->dvb->frontend,
747 0x60, tuner_i2c,
748 &hcw_tda18271_config);
749 break;
750
751 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
752
753 dev->dvb->frontend = dvb_attach(si2165_attach,
754 &hauppauge_930C_HD_1113xx_si2165_config,
755 demod_i2c
756 );
757
758 if (dev->dvb->frontend == NULL) {
759 dev_err(dev->dev,
760 "Failed to attach SI2165 front end\n");
761 result = -EINVAL;
762 goto out_free;
763 }
764
765 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
766
767 /* define general-purpose callback pointer */
768 dvb->frontend->callback = cx231xx_tuner_callback;
769
770 dvb_attach(tda18271_attach, dev->dvb->frontend,
771 0x60,
772 tuner_i2c,
773 &hcw_tda18271_config);
774
775 dev->cx231xx_reset_analog_tuner = NULL;
776 break;
777
778 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
779 {
780 struct i2c_client *client;
781 struct i2c_board_info info;
782 struct si2157_config si2157_config;
783
784 memset(&info, 0, sizeof(struct i2c_board_info));
785
786 dev->dvb->frontend = dvb_attach(si2165_attach,
787 &pctv_quatro_stick_1114xx_si2165_config,
788 demod_i2c
789 );
790
791 if (dev->dvb->frontend == NULL) {
792 dev_err(dev->dev,
793 "Failed to attach SI2165 front end\n");
794 result = -EINVAL;
795 goto out_free;
796 }
797
798 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
799
800 /* define general-purpose callback pointer */
801 dvb->frontend->callback = cx231xx_tuner_callback;
802
803 /* attach tuner */
804 memset(&si2157_config, 0, sizeof(si2157_config));
805 si2157_config.fe = dev->dvb->frontend;
806 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
807 si2157_config.mdev = dev->media_dev;
808 #endif
809 si2157_config.if_port = 1;
810 si2157_config.inversion = true;
811 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
812 info.addr = 0x60;
813 info.platform_data = &si2157_config;
814 request_module("si2157");
815
816 client = i2c_new_device(
817 tuner_i2c,
818 &info);
819 if (client == NULL || client->dev.driver == NULL) {
820 dvb_frontend_detach(dev->dvb->frontend);
821 result = -ENODEV;
822 goto out_free;
823 }
824
825 if (!try_module_get(client->dev.driver->owner)) {
826 i2c_unregister_device(client);
827 dvb_frontend_detach(dev->dvb->frontend);
828 result = -ENODEV;
829 goto out_free;
830 }
831
832 dev->cx231xx_reset_analog_tuner = NULL;
833
834 dev->dvb->i2c_client_tuner = client;
835 break;
836 }
837 case CX231XX_BOARD_HAUPPAUGE_955Q:
838 {
839 struct i2c_client *client;
840 struct i2c_board_info info;
841 struct si2157_config si2157_config;
842
843 memset(&info, 0, sizeof(struct i2c_board_info));
844
845 dev->dvb->frontend = dvb_attach(lgdt3306a_attach,
846 &hauppauge_955q_lgdt3306a_config,
847 demod_i2c
848 );
849
850 if (dev->dvb->frontend == NULL) {
851 dev_err(dev->dev,
852 "Failed to attach LGDT3306A frontend.\n");
853 result = -EINVAL;
854 goto out_free;
855 }
856
857 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
858
859 /* define general-purpose callback pointer */
860 dvb->frontend->callback = cx231xx_tuner_callback;
861
862 /* attach tuner */
863 memset(&si2157_config, 0, sizeof(si2157_config));
864 si2157_config.fe = dev->dvb->frontend;
865 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
866 si2157_config.mdev = dev->media_dev;
867 #endif
868 si2157_config.if_port = 1;
869 si2157_config.inversion = true;
870 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
871 info.addr = 0x60;
872 info.platform_data = &si2157_config;
873 request_module("si2157");
874
875 client = i2c_new_device(
876 tuner_i2c,
877 &info);
878 if (client == NULL || client->dev.driver == NULL) {
879 dvb_frontend_detach(dev->dvb->frontend);
880 result = -ENODEV;
881 goto out_free;
882 }
883
884 if (!try_module_get(client->dev.driver->owner)) {
885 i2c_unregister_device(client);
886 dvb_frontend_detach(dev->dvb->frontend);
887 result = -ENODEV;
888 goto out_free;
889 }
890
891 dev->cx231xx_reset_analog_tuner = NULL;
892
893 dev->dvb->i2c_client_tuner = client;
894 break;
895 }
896 case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
897 case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
898
899 dev_info(dev->dev,
900 "%s: looking for demod on i2c bus: %d\n",
901 __func__, i2c_adapter_id(tuner_i2c));
902
903 dev->dvb->frontend = dvb_attach(mb86a20s_attach,
904 &pv_mb86a20s_config,
905 demod_i2c);
906
907 if (dev->dvb->frontend == NULL) {
908 dev_err(dev->dev,
909 "Failed to attach mb86a20s demod\n");
910 result = -EINVAL;
911 goto out_free;
912 }
913
914 /* define general-purpose callback pointer */
915 dvb->frontend->callback = cx231xx_tuner_callback;
916
917 dvb_attach(tda18271_attach, dev->dvb->frontend,
918 0x60, tuner_i2c,
919 &pv_tda18271_config);
920 break;
921
922 default:
923 dev_err(dev->dev,
924 "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
925 dev->name);
926 break;
927 }
928 if (NULL == dvb->frontend) {
929 dev_err(dev->dev,
930 "%s/2: frontend initialization failed\n", dev->name);
931 result = -EINVAL;
932 goto out_free;
933 }
934
935 /* register everything */
936 result = register_dvb(dvb, THIS_MODULE, dev, dev->dev);
937
938 if (result < 0)
939 goto out_free;
940
941
942 dev_info(dev->dev, "Successfully loaded cx231xx-dvb\n");
943
944 ret:
945 cx231xx_set_mode(dev, CX231XX_SUSPEND);
946 mutex_unlock(&dev->lock);
947 return result;
948
949 out_free:
950 kfree(dvb);
951 dev->dvb = NULL;
952 goto ret;
953 }
954
955 static int dvb_fini(struct cx231xx *dev)
956 {
957 if (!dev->board.has_dvb) {
958 /* This device does not support the extension */
959 return 0;
960 }
961
962 if (dev->dvb) {
963 unregister_dvb(dev->dvb);
964 dev->dvb = NULL;
965 }
966
967 return 0;
968 }
969
970 static struct cx231xx_ops dvb_ops = {
971 .id = CX231XX_DVB,
972 .name = "Cx231xx dvb Extension",
973 .init = dvb_init,
974 .fini = dvb_fini,
975 };
976
977 static int __init cx231xx_dvb_register(void)
978 {
979 return cx231xx_register_extension(&dvb_ops);
980 }
981
982 static void __exit cx231xx_dvb_unregister(void)
983 {
984 cx231xx_unregister_extension(&dvb_ops);
985 }
986
987 module_init(cx231xx_dvb_register);
988 module_exit(cx231xx_dvb_unregister);
This page took 0.057521 seconds and 6 git commands to generate.