drivers/media/video/Kconfig

   1 #
   2 # Generic video config states
   3 #
   4
   5 config VIDEO_V4L2
   6         tristate
   7         depends on VIDEO_DEV && VIDEO_V4L2_COMMON
   8         default VIDEO_DEV && VIDEO_V4L2_COMMON
   9
  10 config VIDEO_V4L1
  11         tristate
  12         depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
  13         default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
  14
  15 config VIDEOBUF_GEN
  16         tristate
  17
  18 config VIDEOBUF_DMA_SG
  19         depends on HAS_DMA
  20         select VIDEOBUF_GEN
  21         tristate
  22
  23 config VIDEOBUF_VMALLOC
  24         select VIDEOBUF_GEN
  25         tristate
  26
  27 config VIDEOBUF_DMA_CONTIG
  28         depends on HAS_DMA
  29         select VIDEOBUF_GEN
  30         tristate
  31
  32 config VIDEOBUF_DVB
  33         tristate
  34         select VIDEOBUF_GEN
  35
  36 config VIDEO_BTCX
  37         depends on PCI
  38         tristate
  39
  40 config VIDEO_IR
  41         tristate
  42         depends on INPUT
  43
  44 config VIDEO_TVEEPROM
  45         tristate
  46         depends on I2C
  47
  48 config VIDEO_TUNER
  49         tristate
  50         depends on MEDIA_TUNER
  51
  52 #
  53 # Multimedia Video device configuration
  54 #
  55
  56 menuconfig VIDEO_CAPTURE_DRIVERS
  57         bool "Video capture adapters"
  58         depends on VIDEO_V4L2
  59         default y
  60         ---help---
  61           Say Y here to enable selecting the video adapters for
  62           webcams, analog TV, and hybrid analog/digital TV.
  63           Some of those devices also supports FM radio.
  64
  65 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
  66
  67 config VIDEO_ADV_DEBUG
  68         bool "Enable advanced debug functionality"
  69         default n
  70         ---help---
  71           Say Y here to enable advanced debugging functionality on some
  72           V4L devices.
  73           In doubt, say N.
  74
  75 config VIDEO_FIXED_MINOR_RANGES
  76         bool "Enable old-style fixed minor ranges for video devices"
  77         default n
  78         ---help---
  79           Say Y here to enable the old-style fixed-range minor assignments.
  80           Only useful if you rely on the old behavior and use mknod instead of udev.
  81
  82           When in doubt, say N.
  83
  84 config VIDEO_HELPER_CHIPS_AUTO
  85         bool "Autoselect pertinent encoders/decoders and other helper chips"
  86         default y
  87         ---help---
  88           Most video cards may require additional modules to encode or
  89           decode audio/video standards. This option will autoselect
  90           all pertinent modules to each selected video module.
  91
  92           Unselect this only if you know exactly what you are doing, since
  93           it may break support on some boards.
  94
  95           In doubt, say Y.
  96
  97 config VIDEO_IR_I2C
  98         tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
  99         depends on I2C && VIDEO_IR
 100         default y
 101         ---help---
 102           Most boards have an IR chip directly connected via GPIO. However,
 103           some video boards have the IR connected via I2C bus.
 104
 105           If your board doesn't have an I2C IR chip, you may disable this
 106           option.
 107
 108           In doubt, say Y.
 109
 110 #
 111 # Encoder / Decoder module configuration
 112 #
 113
 114 menu "Encoders/decoders and other helper chips"
 115         depends on !VIDEO_HELPER_CHIPS_AUTO
 116
 117 comment "Audio decoders"
 118
 119 config VIDEO_TVAUDIO
 120         tristate "Simple audio decoder chips"
 121         depends on VIDEO_V4L2 && I2C
 122         ---help---
 123           Support for several audio decoder chips found on some bt8xx boards:
 124           Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
 125                    tea6320, tea6420, tda8425, ta8874z.
 126           Microchip: pic16c54 based design on ProVideo PV951 board.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called tvaudio.
 130
 131 config VIDEO_TDA7432
 132         tristate "Philips TDA7432 audio processor"
 133         depends on VIDEO_V4L2 && I2C
 134         ---help---
 135           Support for tda7432 audio decoder chip found on some bt8xx boards.
 136
 137           To compile this driver as a module, choose M here: the
 138           module will be called tda7432.
 139
 140 config VIDEO_TDA9840
 141         tristate "Philips TDA9840 audio processor"
 142         depends on I2C
 143         ---help---
 144           Support for tda9840 audio decoder chip found on some Zoran boards.
 145
 146           To compile this driver as a module, choose M here: the
 147           module will be called tda9840.
 148
 149 config VIDEO_TDA9875
 150         tristate "Philips TDA9875 audio processor"
 151         depends on VIDEO_V4L2 && I2C
 152         ---help---
 153           Support for tda9875 audio decoder chip found on some bt8xx boards.
 154
 155           To compile this driver as a module, choose M here: the
 156           module will be called tda9875.
 157
 158 config VIDEO_TEA6415C
 159         tristate "Philips TEA6415C audio processor"
 160         depends on I2C
 161         ---help---
 162           Support for tea6415c audio decoder chip found on some bt8xx boards.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called tea6415c.
 166
 167 config VIDEO_TEA6420
 168         tristate "Philips TEA6420 audio processor"
 169         depends on I2C
 170         ---help---
 171           Support for tea6420 audio decoder chip found on some bt8xx boards.
 172
 173           To compile this driver as a module, choose M here: the
 174           module will be called tea6420.
 175
 176 config VIDEO_MSP3400
 177         tristate "Micronas MSP34xx audio decoders"
 178         depends on VIDEO_V4L2 && I2C
 179         ---help---
 180           Support for the Micronas MSP34xx series of audio decoders.
 181
 182           To compile this driver as a module, choose M here: the
 183           module will be called msp3400.
 184
 185 config VIDEO_CS5345
 186         tristate "Cirrus Logic CS5345 audio ADC"
 187         depends on VIDEO_V4L2 && I2C
 188         ---help---
 189           Support for the Cirrus Logic CS5345 24-bit, 192 kHz
 190           stereo A/D converter.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called cs5345.
 194
 195 config VIDEO_CS53L32A
 196         tristate "Cirrus Logic CS53L32A audio ADC"
 197         depends on VIDEO_V4L2 && I2C
 198         ---help---
 199           Support for the Cirrus Logic CS53L32A low voltage
 200           stereo A/D converter.
 201
 202           To compile this driver as a module, choose M here: the
 203           module will be called cs53l32a.
 204
 205 config VIDEO_M52790
 206         tristate "Mitsubishi M52790 A/V switch"
 207         depends on VIDEO_V4L2 && I2C
 208         ---help---
 209          Support for the Mitsubishi M52790 A/V switch.
 210
 211          To compile this driver as a module, choose M here: the
 212          module will be called m52790.
 213
 214 config VIDEO_TLV320AIC23B
 215         tristate "Texas Instruments TLV320AIC23B audio codec"
 216         depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 217         ---help---
 218           Support for the Texas Instruments TLV320AIC23B audio codec.
 219
 220           To compile this driver as a module, choose M here: the
 221           module will be called tlv320aic23b.
 222
 223 config VIDEO_WM8775
 224         tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
 225         depends on VIDEO_V4L2 && I2C
 226         ---help---
 227           Support for the Wolfson Microelectronics WM8775 high
 228           performance stereo A/D Converter with a 4 channel input mixer.
 229
 230           To compile this driver as a module, choose M here: the
 231           module will be called wm8775.
 232
 233 config VIDEO_WM8739
 234         tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
 235         depends on VIDEO_V4L2 && I2C
 236         ---help---
 237           Support for the Wolfson Microelectronics WM8739
 238           stereo A/D Converter.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called wm8739.
 242
 243 config VIDEO_VP27SMPX
 244         tristate "Panasonic VP27s internal MPX"
 245         depends on VIDEO_V4L2 && I2C
 246         ---help---
 247           Support for the internal MPX of the Panasonic VP27s tuner.
 248
 249           To compile this driver as a module, choose M here: the
 250           module will be called vp27smpx.
 251
 252 comment "RDS decoders"
 253
 254 config VIDEO_SAA6588
 255         tristate "SAA6588 Radio Chip RDS decoder support"
 256         depends on VIDEO_V4L2 && I2C
 257
 258         help
 259           Support for this Radio Data System (RDS) decoder. This allows
 260           seeing radio station identification transmitted using this
 261           standard.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called saa6588.
 265
 266 comment "Video decoders"
 267
 268 config VIDEO_ADV7180
 269         tristate "Analog Devices ADV7180 decoder"
 270         depends on VIDEO_V4L2 && I2C
 271         ---help---
 272           Support for the Analog Devices ADV7180 video decoder.
 273
 274           To compile this driver as a module, choose M here: the
 275           module will be called adv7180.
 276
 277 config VIDEO_BT819
 278         tristate "BT819A VideoStream decoder"
 279         depends on VIDEO_V4L2 && I2C
 280         ---help---
 281           Support for BT819A video decoder.
 282
 283           To compile this driver as a module, choose M here: the
 284           module will be called bt819.
 285
 286 config VIDEO_BT856
 287         tristate "BT856 VideoStream decoder"
 288         depends on VIDEO_V4L2 && I2C
 289         ---help---
 290           Support for BT856 video decoder.
 291
 292           To compile this driver as a module, choose M here: the
 293           module will be called bt856.
 294
 295 config VIDEO_BT866
 296         tristate "BT866 VideoStream decoder"
 297         depends on VIDEO_V4L2 && I2C
 298         ---help---
 299           Support for BT866 video decoder.
 300
 301           To compile this driver as a module, choose M here: the
 302           module will be called bt866.
 303
 304 config VIDEO_KS0127
 305         tristate "KS0127 video decoder"
 306         depends on VIDEO_V4L2 && I2C
 307         ---help---
 308           Support for KS0127 video decoder.
 309
 310           This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
 311           cards.
 312
 313           To compile this driver as a module, choose M here: the
 314           module will be called ks0127.
 315
 316 config VIDEO_OV7670
 317         tristate "OmniVision OV7670 sensor support"
 318         depends on I2C && VIDEO_V4L2
 319         ---help---
 320           This is a Video4Linux2 sensor-level driver for the OmniVision
 321           OV7670 VGA camera.  It currently only works with the M88ALP01
 322           controller.
 323
 324 config VIDEO_MT9V011
 325         tristate "Micron mt9v011 sensor support"
 326         depends on I2C && VIDEO_V4L2
 327         ---help---
 328           This is a Video4Linux2 sensor-level driver for the Micron
 329           mt0v011 1.3 Mpixel camera.  It currently only works with the
 330           em28xx driver.
 331
 332 config VIDEO_TCM825X
 333         tristate "TCM825x camera sensor support"
 334         depends on I2C && VIDEO_V4L2
 335         ---help---
 336           This is a driver for the Toshiba TCM825x VGA camera sensor.
 337           It is used for example in Nokia N800.
 338
 339 config VIDEO_SAA7110
 340         tristate "Philips SAA7110 video decoder"
 341         depends on VIDEO_V4L2 && I2C
 342         ---help---
 343           Support for the Philips SAA7110 video decoders.
 344
 345           To compile this driver as a module, choose M here: the
 346           module will be called saa7110.
 347
 348 config VIDEO_SAA711X
 349         tristate "Philips SAA7111/3/4/5 video decoders"
 350         depends on VIDEO_V4L2 && I2C
 351         ---help---
 352           Support for the Philips SAA7111/3/4/5 video decoders.
 353
 354           To compile this driver as a module, choose M here: the
 355           module will be called saa7115.
 356
 357 config VIDEO_SAA717X
 358         tristate "Philips SAA7171/3/4 audio/video decoders"
 359         depends on VIDEO_V4L2 && I2C
 360         ---help---
 361           Support for the Philips SAA7171/3/4 audio/video decoders.
 362
 363           To compile this driver as a module, choose M here: the
 364           module will be called saa717x.
 365
 366 config VIDEO_SAA7191
 367         tristate "Philips SAA7191 video decoder"
 368         depends on VIDEO_V4L1 && I2C
 369         ---help---
 370           Support for the Philips SAA7191 video decoder.
 371
 372           To compile this driver as a module, choose M here: the
 373           module will be called saa7191.
 374
 375 config VIDEO_TVP514X
 376         tristate "Texas Instruments TVP514x video decoder"
 377         depends on VIDEO_V4L2 && I2C
 378         ---help---
 379           This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
 380           decoder. It is currently working with the TI OMAP3 camera
 381           controller.
 382
 383           To compile this driver as a module, choose M here: the
 384           module will be called tvp514x.
 385
 386 config VIDEO_TVP5150
 387         tristate "Texas Instruments TVP5150 video decoder"
 388         depends on VIDEO_V4L2 && I2C
 389         ---help---
 390           Support for the Texas Instruments TVP5150 video decoder.
 391
 392           To compile this driver as a module, choose M here: the
 393           module will be called tvp5150.
 394
 395 config VIDEO_VPX3220
 396         tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
 397         depends on VIDEO_V4L2 && I2C
 398         ---help---
 399           Support for VPX322x video decoders.
 400
 401           To compile this driver as a module, choose M here: the
 402           module will be called vpx3220.
 403
 404 comment "Video and audio decoders"
 405
 406 source "drivers/media/video/cx25840/Kconfig"
 407
 408 comment "MPEG video encoders"
 409
 410 config VIDEO_CX2341X
 411         tristate "Conexant CX2341x MPEG encoders"
 412         depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
 413         ---help---
 414           Support for the Conexant CX23416 MPEG encoders
 415           and CX23415 MPEG encoder/decoders.
 416
 417           This module currently supports the encoding functions only.
 418
 419           To compile this driver as a module, choose M here: the
 420           module will be called cx2341x.
 421
 422 comment "Video encoders"
 423
 424 config VIDEO_SAA7127
 425         tristate "Philips SAA7127/9 digital video encoders"
 426         depends on VIDEO_V4L2 && I2C
 427         ---help---
 428           Support for the Philips SAA7127/9 digital video encoders.
 429
 430           To compile this driver as a module, choose M here: the
 431           module will be called saa7127.
 432
 433 config VIDEO_SAA7185
 434         tristate "Philips SAA7185 video encoder"
 435         depends on VIDEO_V4L2 && I2C
 436         ---help---
 437           Support for the Philips SAA7185 video encoder.
 438
 439           To compile this driver as a module, choose M here: the
 440           module will be called saa7185.
 441
 442 config VIDEO_ADV7170
 443         tristate "Analog Devices ADV7170 video encoder"
 444         depends on VIDEO_V4L2 && I2C
 445         ---help---
 446           Support for the Analog Devices ADV7170 video encoder driver
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called adv7170.
 450
 451 config VIDEO_ADV7175
 452         tristate "Analog Devices ADV7175 video encoder"
 453         depends on VIDEO_V4L2 && I2C
 454         ---help---
 455           Support for the Analog Devices ADV7175 video encoder driver
 456
 457           To compile this driver as a module, choose M here: the
 458           module will be called adv7175.
 459
 460 config VIDEO_THS7303
 461         tristate "THS7303 Video Amplifier"
 462         depends on I2C
 463         help
 464           Support for TI THS7303 video amplifier
 465
 466           To compile this driver as a module, choose M here: the
 467           module will be called ths7303.
 468
 469 config VIDEO_ADV7343
 470         tristate "ADV7343 video encoder"
 471         depends on I2C
 472         help
 473           Support for Analog Devices I2C bus based ADV7343 encoder.
 474
 475           To compile this driver as a module, choose M here: the
 476           module will be called adv7343.
 477
 478 comment "Video improvement chips"
 479
 480 config VIDEO_UPD64031A
 481         tristate "NEC Electronics uPD64031A Ghost Reduction"
 482         depends on VIDEO_V4L2 && I2C
 483         ---help---
 484           Support for the NEC Electronics uPD64031A Ghost Reduction
 485           video chip. It is most often found in NTSC TV cards made for
 486           Japan and is used to reduce the 'ghosting' effect that can
 487           be present in analog TV broadcasts.
 488
 489           To compile this driver as a module, choose M here: the
 490           module will be called upd64031a.
 491
 492 config VIDEO_UPD64083
 493         tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
 494         depends on VIDEO_V4L2 && I2C
 495         ---help---
 496           Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 497           separation video chip. It is used to improve the quality of
 498           the colors of a composite signal.
 499
 500           To compile this driver as a module, choose M here: the
 501           module will be called upd64083.
 502
 503 endmenu # encoder / decoder chips
 504
 505 config DISPLAY_DAVINCI_DM646X_EVM
 506         tristate "DM646x EVM Video Display"
 507         depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
 508         select VIDEOBUF_DMA_CONTIG
 509         select VIDEO_DAVINCI_VPIF
 510         select VIDEO_ADV7343
 511         select VIDEO_THS7303
 512         help
 513           Support for DM6467 based display device.
 514
 515           To compile this driver as a module, choose M here: the
 516           module will be called vpif_display.
 517
 518 config CAPTURE_DAVINCI_DM646X_EVM
 519         tristate "DM646x EVM Video Capture"
 520         depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
 521         select VIDEOBUF_DMA_CONTIG
 522         select VIDEO_DAVINCI_VPIF
 523         help
 524           Support for DM6467 based capture device.
 525
 526           To compile this driver as a module, choose M here: the
 527           module will be called vpif_capture.
 528
 529 config VIDEO_DAVINCI_VPIF
 530         tristate "DaVinci VPIF Driver"
 531         depends on DISPLAY_DAVINCI_DM646X_EVM
 532         help
 533           Support for DaVinci VPIF Driver.
 534
 535           To compile this driver as a module, choose M here: the
 536           module will be called vpif.
 537
 538 config VIDEO_VIVI
 539         tristate "Virtual Video Driver"
 540         depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
 541         select VIDEOBUF_VMALLOC
 542         default n
 543         ---help---
 544           Enables a virtual video driver. This device shows a color bar
 545           and a timestamp, as a real device would generate by using V4L2
 546           api.
 547           Say Y here if you want to test video apps or debug V4L devices.
 548           In doubt, say N.
 549
 550 config VIDEO_VPSS_SYSTEM
 551         tristate "VPSS System module driver"
 552         depends on ARCH_DAVINCI
 553         help
 554           Support for vpss system module for video driver
 555         default y
 556
 557 config VIDEO_VPFE_CAPTURE
 558         tristate "VPFE Video Capture Driver"
 559         depends on VIDEO_V4L2 && ARCH_DAVINCI
 560         select VIDEOBUF_DMA_CONTIG
 561         help
 562           Support for DMXXXX VPFE based frame grabber. This is the
 563           common V4L2 module for following DMXXX SoCs from Texas
 564           Instruments:- DM6446 & DM355.
 565
 566           To compile this driver as a module, choose M here: the
 567           module will be called vpfe-capture.
 568
 569 config VIDEO_DM6446_CCDC
 570         tristate "DM6446 CCDC HW module"
 571         depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
 572         select VIDEO_VPSS_SYSTEM
 573         default y
 574         help
 575            Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
 576            with decoder modules such as TVP5146 over BT656 or
 577            sensor module such as MT9T001 over a raw interface. This
 578            module configures the interface and CCDC/ISIF to do
 579            video frame capture from slave decoders.
 580
 581            To compile this driver as a module, choose M here: the
 582            module will be called vpfe.
 583
 584 config VIDEO_DM355_CCDC
 585         tristate "DM355 CCDC HW module"
 586         depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
 587         select VIDEO_VPSS_SYSTEM
 588         default y
 589         help
 590            Enables DM355 CCD hw module. DM355 CCDC hw interfaces
 591            with decoder modules such as TVP5146 over BT656 or
 592            sensor module such as MT9T001 over a raw interface. This
 593            module configures the interface and CCDC/ISIF to do
 594            video frame capture from a slave decoders
 595
 596            To compile this driver as a module, choose M here: the
 597            module will be called vpfe.
 598
 599 source "drivers/media/video/bt8xx/Kconfig"
 600
 601 config VIDEO_PMS
 602         tristate "Mediavision Pro Movie Studio Video For Linux"
 603         depends on ISA && VIDEO_V4L1
 604         help
 605           Say Y if you have such a thing.
 606
 607           To compile this driver as a module, choose M here: the
 608           module will be called pms.
 609
 610 config VIDEO_BWQCAM
 611         tristate "Quickcam BW Video For Linux"
 612         depends on PARPORT && VIDEO_V4L1
 613         help
 614           Say Y have if you the black and white version of the QuickCam
 615           camera. See the next option for the color version.
 616
 617           To compile this driver as a module, choose M here: the
 618           module will be called bw-qcam.
 619
 620 config VIDEO_CQCAM
 621         tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
 622         depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
 623         help
 624           This is the video4linux driver for the colour version of the
 625           Connectix QuickCam.  If you have one of these cameras, say Y here,
 626           otherwise say N.  This driver does not work with the original
 627           monochrome QuickCam, QuickCam VC or QuickClip.  It is also available
 628           as a module (c-qcam).
 629           Read <file:Documentation/video4linux/CQcam.txt> for more information.
 630
 631 config VIDEO_W9966
 632         tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
 633         depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
 634         help
 635           Video4linux driver for Winbond's w9966 based Webcams.
 636           Currently tested with the LifeView FlyCam Supra.
 637           If you have one of these cameras, say Y here
 638           otherwise say N.
 639           This driver is also available as a module (w9966).
 640
 641           Check out <file:Documentation/video4linux/w9966.txt> for more
 642           information.
 643
 644 config VIDEO_CPIA
 645         tristate "CPiA Video For Linux"
 646         depends on VIDEO_V4L1
 647         ---help---
 648           This is the video4linux driver for cameras based on Vision's CPiA
 649           (Colour Processor Interface ASIC), such as the Creative Labs Video
 650           Blaster Webcam II. If you have one of these cameras, say Y here
 651           and select parallel port and/or USB lowlevel support below,
 652           otherwise say N. This will not work with the Creative Webcam III.
 653
 654           Please read <file:Documentation/video4linux/README.cpia> for more
 655           information.
 656
 657           This driver is also available as a module (cpia).
 658
 659 config VIDEO_CPIA_PP
 660         tristate "CPiA Parallel Port Lowlevel Support"
 661         depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
 662         help
 663           This is the lowlevel parallel port support for cameras based on
 664           Vision's CPiA (Colour Processor Interface ASIC), such as the
 665           Creative Webcam II. If you have the parallel port version of one
 666           of these cameras, say Y here, otherwise say N. It is also available
 667           as a module (cpia_pp).
 668
 669 config VIDEO_CPIA_USB
 670         tristate "CPiA USB Lowlevel Support"
 671         depends on VIDEO_CPIA && USB
 672         help
 673           This is the lowlevel USB support for cameras based on Vision's CPiA
 674           (Colour Processor Interface ASIC), such as the Creative Webcam II.
 675           If you have the USB version of one of these cameras, say Y here,
 676           otherwise say N. This will not work with the Creative Webcam III.
 677           It is also available as a module (cpia_usb).
 678
 679 source "drivers/media/video/cpia2/Kconfig"
 680
 681 config VIDEO_SAA5246A
 682         tristate "SAA5246A, SAA5281 Teletext processor"
 683         depends on I2C && VIDEO_V4L2
 684         help
 685           Support for I2C bus based teletext using the SAA5246A or SAA5281
 686           chip. Useful only if you live in Europe.
 687
 688           To compile this driver as a module, choose M here: the
 689           module will be called saa5246a.
 690
 691 config VIDEO_SAA5249
 692         tristate "SAA5249 Teletext processor"
 693         depends on I2C && VIDEO_V4L2
 694         help
 695           Support for I2C bus based teletext using the SAA5249 chip. At the
 696           moment this is only useful on some European WinTV cards.
 697
 698           To compile this driver as a module, choose M here: the
 699           module will be called saa5249.
 700
 701 config VIDEO_VINO
 702         tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
 703         depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
 704         select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
 705         help
 706           Say Y here to build in support for the Vino video input system found
 707           on SGI Indy machines.
 708
 709 config VIDEO_STRADIS
 710         tristate "Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)"
 711         depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
 712         help
 713           Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
 714           driver for PCI.  There is a product page at
 715           <http://www.stradis.com/>.
 716
 717 source "drivers/media/video/zoran/Kconfig"
 718
 719 config VIDEO_MEYE
 720         tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
 721         depends on PCI && SONY_LAPTOP && VIDEO_V4L1
 722         ---help---
 723           This is the video4linux driver for the Motion Eye camera found
 724           in the Vaio Picturebook laptops. Please read the material in
 725           <file:Documentation/video4linux/meye.txt> for more information.
 726
 727           If you say Y or M here, you need to say Y or M to "Sony Laptop
 728           Extras" in the misc device section.
 729
 730           To compile this driver as a module, choose M here: the
 731           module will be called meye.
 732
 733 source "drivers/media/video/saa7134/Kconfig"
 734
 735 config VIDEO_MXB
 736         tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
 737         depends on PCI && VIDEO_V4L1 && I2C
 738         select VIDEO_SAA7146_VV
 739         select VIDEO_TUNER
 740         select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 741         select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
 742         select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
 743         select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
 744         ---help---
 745           This is a video4linux driver for the 'Multimedia eXtension Board'
 746           TV card by Siemens-Nixdorf.
 747
 748           To compile this driver as a module, choose M here: the
 749           module will be called mxb.
 750
 751 config VIDEO_HEXIUM_ORION
 752         tristate "Hexium HV-PCI6 and Orion frame grabber"
 753         depends on PCI && VIDEO_V4L2 && I2C
 754         select VIDEO_SAA7146_VV
 755         ---help---
 756           This is a video4linux driver for the Hexium HV-PCI6 and
 757           Orion frame grabber cards by Hexium.
 758
 759           To compile this driver as a module, choose M here: the
 760           module will be called hexium_orion.
 761
 762 config VIDEO_HEXIUM_GEMINI
 763         tristate "Hexium Gemini frame grabber"
 764         depends on PCI && VIDEO_V4L2 && I2C
 765         select VIDEO_SAA7146_VV
 766         ---help---
 767           This is a video4linux driver for the Hexium Gemini frame
 768           grabber card by Hexium. Please note that the Gemini Dual
 769           card is *not* fully supported.
 770
 771           To compile this driver as a module, choose M here: the
 772           module will be called hexium_gemini.
 773
 774 source "drivers/media/video/cx88/Kconfig"
 775
 776 source "drivers/media/video/cx23885/Kconfig"
 777
 778 source "drivers/media/video/au0828/Kconfig"
 779
 780 source "drivers/media/video/ivtv/Kconfig"
 781
 782 source "drivers/media/video/cx18/Kconfig"
 783
 784 source "drivers/media/video/saa7164/Kconfig"
 785
 786 config VIDEO_M32R_AR
 787         tristate "AR devices"
 788         depends on M32R && VIDEO_V4L1
 789         ---help---
 790           This is a video4linux driver for the Renesas AR (Artificial Retina)
 791           camera module.
 792
 793 config VIDEO_M32R_AR_M64278
 794         tristate "AR device with color module M64278(VGA)"
 795         depends on PLAT_M32700UT
 796         select VIDEO_M32R_AR
 797         ---help---
 798           This is a video4linux driver for the Renesas AR (Artificial
 799           Retina) with M64278E-800 camera module.
 800           This module supports VGA(640x480 pixels) resolutions.
 801
 802           To compile this driver as a module, choose M here: the
 803           module will be called arv.
 804
 805 config VIDEO_CAFE_CCIC
 806         tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
 807         depends on PCI && I2C && VIDEO_V4L2
 808         select VIDEO_OV7670
 809         ---help---
 810           This is a video4linux2 driver for the Marvell 88ALP01 integrated
 811           CMOS camera controller.  This is the controller found on first-
 812           generation OLPC systems.
 813
 814 config SOC_CAMERA
 815         tristate "SoC camera support"
 816         depends on VIDEO_V4L2 && HAS_DMA && I2C
 817         select VIDEOBUF_GEN
 818         help
 819           SoC Camera is a common API to several cameras, not connecting
 820           over a bus like PCI or USB. For example some i2c camera connected
 821           directly to the data bus of an SoC.
 822
 823 config SOC_CAMERA_MT9M001
 824         tristate "mt9m001 support"
 825         depends on SOC_CAMERA && I2C
 826         select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
 827         help
 828           This driver supports MT9M001 cameras from Micron, monochrome
 829           and colour models.
 830
 831 config SOC_CAMERA_MT9M111
 832         tristate "mt9m111 and mt9m112 support"
 833         depends on SOC_CAMERA && I2C
 834         help
 835           This driver supports MT9M111 and MT9M112 cameras from Micron
 836
 837 config SOC_CAMERA_MT9T031
 838         tristate "mt9t031 support"
 839         depends on SOC_CAMERA && I2C
 840         help
 841           This driver supports MT9T031 cameras from Micron.
 842
 843 config SOC_CAMERA_MT9V022
 844         tristate "mt9v022 support"
 845         depends on SOC_CAMERA && I2C
 846         select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
 847         help
 848           This driver supports MT9V022 cameras from Micron
 849
 850 config SOC_CAMERA_TW9910
 851         tristate "tw9910 support"
 852         depends on SOC_CAMERA && I2C
 853         help
 854           This is a tw9910 video driver
 855
 856 config SOC_CAMERA_PLATFORM
 857         tristate "platform camera support"
 858         depends on SOC_CAMERA
 859         help
 860           This is a generic SoC camera platform driver, useful for testing
 861
 862 config SOC_CAMERA_OV772X
 863         tristate "ov772x camera support"
 864         depends on SOC_CAMERA && I2C
 865         help
 866           This is a ov772x camera driver
 867
 868 config MX1_VIDEO
 869         bool
 870
 871 config VIDEO_MX1
 872         tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
 873         depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
 874         select FIQ
 875         select VIDEOBUF_DMA_CONTIG
 876         select MX1_VIDEO
 877         ---help---
 878           This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 879
 880 config MX3_VIDEO
 881         bool
 882
 883 config VIDEO_MX3
 884         tristate "i.MX3x Camera Sensor Interface driver"
 885         depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
 886         select VIDEOBUF_DMA_CONTIG
 887         select MX3_VIDEO
 888         ---help---
 889           This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 890
 891 config VIDEO_PXA27x
 892         tristate "PXA27x Quick Capture Interface driver"
 893         depends on VIDEO_DEV && PXA27x && SOC_CAMERA
 894         select VIDEOBUF_DMA_SG
 895         ---help---
 896           This is a v4l2 driver for the PXA27x Quick Capture Interface
 897
 898 config VIDEO_SH_MOBILE_CEU
 899         tristate "SuperH Mobile CEU Interface driver"
 900         depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
 901         select VIDEOBUF_DMA_CONTIG
 902         ---help---
 903           This is a v4l2 driver for the SuperH Mobile CEU Interface
 904
 905 config VIDEO_OMAP2
 906         tristate "OMAP2 Camera Capture Interface driver"
 907         depends on VIDEO_DEV && ARCH_OMAP2
 908         select VIDEOBUF_DMA_SG
 909         ---help---
 910           This is a v4l2 driver for the TI OMAP2 camera capture interface
 911
 912 #
 913 # USB Multimedia device configuration
 914 #
 915
 916 menuconfig V4L_USB_DRIVERS
 917         bool "V4L USB devices"
 918         depends on USB
 919         default y
 920
 921 if V4L_USB_DRIVERS && USB
 922
 923 source "drivers/media/video/uvc/Kconfig"
 924
 925 source "drivers/media/video/gspca/Kconfig"
 926
 927 source "drivers/media/video/pvrusb2/Kconfig"
 928
 929 source "drivers/media/video/hdpvr/Kconfig"
 930
 931 source "drivers/media/video/em28xx/Kconfig"
 932
 933 source "drivers/media/video/cx231xx/Kconfig"
 934
 935 source "drivers/media/video/usbvision/Kconfig"
 936
 937 source "drivers/media/video/usbvideo/Kconfig"
 938
 939 source "drivers/media/video/et61x251/Kconfig"
 940
 941 config VIDEO_OVCAMCHIP
 942         tristate "OmniVision Camera Chip support"
 943         depends on I2C && VIDEO_V4L1
 944         ---help---
 945           Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
 946           This driver is intended to be used with the ov511 and w9968cf USB
 947           camera drivers.
 948
 949           To compile this driver as a module, choose M here: the
 950           module will be called ovcamchip.
 951
 952 config USB_W9968CF
 953         tristate "USB W996[87]CF JPEG Dual Mode Camera support"
 954         depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
 955         ---help---
 956           Say Y here if you want support for cameras based on OV681 or
 957           Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
 958
 959           This driver has an optional plugin, which is distributed as a
 960           separate module only (released under GPL). It allows to use higher
 961           resolutions and framerates, but cannot be included in the official
 962           Linux kernel for performance purposes.
 963
 964           See <file:Documentation/video4linux/w9968cf.txt> for more info.
 965
 966           To compile this driver as a module, choose M here: the
 967           module will be called w9968cf.
 968
 969 config USB_OV511
 970         tristate "USB OV511 Camera support (DEPRECATED)"
 971         depends on VIDEO_V4L1
 972         ---help---
 973           This driver is DEPRECATED please use the gspca ov519 module
 974           instead. Note that for the ov511 / ov518 support of the gspca module
 975           you need atleast version 0.6.0 of libv4l.
 976
 977           Say Y here if you want to connect this type of camera to your
 978           computer's USB port. See <file:Documentation/video4linux/ov511.txt>
 979           for more information and for a list of supported cameras.
 980
 981           To compile this driver as a module, choose M here: the
 982           module will be called ov511.
 983
 984 config USB_SE401
 985         tristate "USB SE401 Camera support"
 986         depends on VIDEO_V4L1
 987         ---help---
 988           Say Y here if you want to connect this type of camera to your
 989           computer's USB port. See <file:Documentation/video4linux/se401.txt>
 990           for more information and for a list of supported cameras.
 991
 992           To compile this driver as a module, choose M here: the
 993           module will be called se401.
 994
 995 source "drivers/media/video/sn9c102/Kconfig"
 996
 997 config USB_STV680
 998         tristate "USB STV680 (Pencam) Camera support"
 999         depends on VIDEO_V4L1
1000         ---help---
1001           Say Y here if you want to connect this type of camera to your
1002           computer's USB port. This includes the Pencam line of cameras.
1003           See <file:Documentation/video4linux/stv680.txt> for more information
1004           and for a list of supported cameras.
1005
1006           To compile this driver as a module, choose M here: the
1007           module will be called stv680.
1008
1009 source "drivers/media/video/zc0301/Kconfig"
1010
1011 source "drivers/media/video/pwc/Kconfig"
1012
1013 config USB_ZR364XX
1014         tristate "USB ZR364XX Camera support"
1015         depends on VIDEO_V4L2
1016         select VIDEOBUF_GEN
1017         select VIDEOBUF_VMALLOC
1018         ---help---
1019           Say Y here if you want to connect this type of camera to your
1020           computer's USB port.
1021           See <file:Documentation/video4linux/zr364xx.txt> for more info
1022           and list of supported cameras.
1023
1024           To compile this driver as a module, choose M here: the
1025           module will be called zr364xx.
1026
1027 config USB_STKWEBCAM
1028         tristate "USB Syntek DC1125 Camera support"
1029         depends on VIDEO_V4L2 && EXPERIMENTAL
1030         ---help---
1031           Say Y here if you want to use this type of camera.
1032           Supported devices are typically found in some Asus laptops,
1033           with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
1034           may be supported by the stk11xx driver, from which this is
1035           derived, see http://stk11xx.sourceforge.net
1036
1037           To compile this driver as a module, choose M here: the
1038           module will be called stkwebcam.
1039
1040 config USB_S2255
1041         tristate "USB Sensoray 2255 video capture device"
1042         depends on VIDEO_V4L2
1043         select VIDEOBUF_VMALLOC
1044         default n
1045         help
1046           Say Y here if you want support for the Sensoray 2255 USB device.
1047           This driver can be compiled as a module, called s2255drv.
1048
1049 endif # V4L_USB_DRIVERS
1050 endif # VIDEO_CAPTURE_DRIVERS