projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
locks: fix vfs_test_lock() comment
[deliverable/linux.git] / drivers / media / video / bt8xx / bttv-cards.c
1 /*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/kmod.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/vmalloc.h>
35 #include <linux/firmware.h>
36
37 #include <asm/io.h>
38
39 #include "bttvp.h"
40 #include <media/v4l2-common.h>
41 #include <media/tvaudio.h>
42
43 /* fwd decl */
44 static void boot_msp34xx(struct bttv *btv, int pin);
45 static void boot_bt832(struct bttv *btv);
46 static void hauppauge_eeprom(struct bttv *btv);
47 static void avermedia_eeprom(struct bttv *btv);
48 static void osprey_eeprom(struct bttv *btv);
49 static void modtec_eeprom(struct bttv *btv);
50 static void init_PXC200(struct bttv *btv);
51 static void init_RTV24(struct bttv *btv);
52
53 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
54 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
55 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
56 int set);
57 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
58 int set);
59 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
60 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void rv605_muxsel(struct bttv *btv, unsigned int input);
68 static void eagle_muxsel(struct bttv *btv, unsigned int input);
69 static void xguard_muxsel(struct bttv *btv, unsigned int input);
70 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
71 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
72
73 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
74
75 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
76 static void picolo_tetra_init(struct bttv *btv);
77
78 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
79 static void tibetCS16_init(struct bttv *btv);
80
81 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
82 static void kodicom4400r_init(struct bttv *btv);
83
84 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
85 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
86
87 static int terratec_active_radio_upgrade(struct bttv *btv);
88 static int tea5757_read(struct bttv *btv);
89 static int tea5757_write(struct bttv *btv, int value);
90 static void identify_by_eeprom(struct bttv *btv,
91 unsigned char eeprom_data[256]);
92 static int __devinit pvr_boot(struct bttv *btv);
93
94 /* config variables */
95 static unsigned int triton1;
96 static unsigned int vsfx;
97 static unsigned int latency = UNSET;
98 int no_overlay=-1;
99
100 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
106 #ifdef MODULE
107 static unsigned int autoload = 1;
108 #else
109 static unsigned int autoload;
110 #endif
111 static unsigned int gpiomask = UNSET;
112 static unsigned int audioall = UNSET;
113 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
114
115 /* insmod options */
116 module_param(triton1, int, 0444);
117 module_param(vsfx, int, 0444);
118 module_param(no_overlay, int, 0444);
119 module_param(latency, int, 0444);
120 module_param(gpiomask, int, 0444);
121 module_param(audioall, int, 0444);
122 module_param(autoload, int, 0444);
123
124 module_param_array(card, int, NULL, 0444);
125 module_param_array(pll, int, NULL, 0444);
126 module_param_array(tuner, int, NULL, 0444);
127 module_param_array(svhs, int, NULL, 0444);
128 module_param_array(remote, int, NULL, 0444);
129 module_param_array(audiomux, int, NULL, 0444);
130
131 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
132 "[enable bug compatibility for triton1 + others]");
133 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
134 "[yet another chipset flaw workaround]");
135 MODULE_PARM_DESC(latency,"pci latency timer");
136 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
137 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
138 MODULE_PARM_DESC(tuner,"specify installed tuner type");
139 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
142
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
145
146 static struct CARD {
147 unsigned id;
148 int cardnr;
149 char *name;
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
160
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
163
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
173
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
180
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
184
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
192
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
198
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
203
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
212
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
218
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
224
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
229
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
234
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
260
261 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
262 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
263
264 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
265 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
266 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
267 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
268 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
269 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
270
271 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
272 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
273
274 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
275 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
276 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
277 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
278 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
279 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
280 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
281 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
282 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
283
284 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
285 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
286
287 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
288 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
289 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
290 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
291
292 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
293
294 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
295 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
296
297 /* likely broken, vendor id doesn't match the other magic views ...
298 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
299
300 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
301 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
302
303 /* DVB cards (using pci function .1 for mpeg data xfer) */
304 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
305 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
307 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
308 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
309 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
310 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
311 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
312 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
313 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
314 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
315 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
316
317 { 0, -1, NULL }
318 };
319
320 /* ----------------------------------------------------------------------- */
321 /* array with description for bt848 / bt878 tv/grabber cards */
322
323 struct tvcard bttv_tvcards[] = {
324 /* ---- card 0x00 ---------------------------------- */
325 [BTTV_BOARD_UNKNOWN] = {
326 .name = " *** UNKNOWN/GENERIC *** ",
327 .video_inputs = 4,
328 .audio_inputs = 1,
329 .tuner = 0,
330 .svhs = 2,
331 .muxsel = { 2, 3, 1, 0 },
332 .tuner_type = -1,
333 .tuner_addr = ADDR_UNSET,
334 .radio_addr = ADDR_UNSET,
335 },
336 [BTTV_BOARD_MIRO] = {
337 .name = "MIRO PCTV",
338 .video_inputs = 4,
339 .audio_inputs = 1,
340 .tuner = 0,
341 .svhs = 2,
342 .gpiomask = 15,
343 .muxsel = { 2, 3, 1, 1 },
344 .gpiomux = { 2, 0, 0, 0 },
345 .gpiomute = 10,
346 .needs_tvaudio = 1,
347 .tuner_type = -1,
348 .tuner_addr = ADDR_UNSET,
349 .radio_addr = ADDR_UNSET,
350 },
351 [BTTV_BOARD_HAUPPAUGE] = {
352 .name = "Hauppauge (bt848)",
353 .video_inputs = 4,
354 .audio_inputs = 1,
355 .tuner = 0,
356 .svhs = 2,
357 .gpiomask = 7,
358 .muxsel = { 2, 3, 1, 1 },
359 .gpiomux = { 0, 1, 2, 3 },
360 .gpiomute = 4,
361 .needs_tvaudio = 1,
362 .tuner_type = -1,
363 .tuner_addr = ADDR_UNSET,
364 .radio_addr = ADDR_UNSET,
365 },
366 [BTTV_BOARD_STB] = {
367 .name = "STB, Gateway P/N 6000699 (bt848)",
368 .video_inputs = 3,
369 .audio_inputs = 1,
370 .tuner = 0,
371 .svhs = 2,
372 .gpiomask = 7,
373 .muxsel = { 2, 3, 1, 1 },
374 .gpiomux = { 4, 0, 2, 3 },
375 .gpiomute = 1,
376 .no_msp34xx = 1,
377 .needs_tvaudio = 1,
378 .tuner_type = TUNER_PHILIPS_NTSC,
379 .tuner_addr = ADDR_UNSET,
380 .radio_addr = ADDR_UNSET,
381 .pll = PLL_28,
382 .has_radio = 1,
383 },
384
385 /* ---- card 0x04 ---------------------------------- */
386 [BTTV_BOARD_INTEL] = {
387 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
388 .video_inputs = 4,
389 .audio_inputs = 0,
390 .tuner = -1,
391 .svhs = 2,
392 .gpiomask = 0,
393 .muxsel = { 2, 3, 1, 1 },
394 .gpiomux = { 0 },
395 .needs_tvaudio = 0,
396 .tuner_type = 4,
397 .tuner_addr = ADDR_UNSET,
398 .radio_addr = ADDR_UNSET,
399 },
400 [BTTV_BOARD_DIAMOND] = {
401 .name = "Diamond DTV2000",
402 .video_inputs = 4,
403 .audio_inputs = 1,
404 .tuner = 0,
405 .svhs = 2,
406 .gpiomask = 3,
407 .muxsel = { 2, 3, 1, 0 },
408 .gpiomux = { 0, 1, 0, 1 },
409 .gpiomute = 3,
410 .needs_tvaudio = 1,
411 .tuner_type = -1,
412 .tuner_addr = ADDR_UNSET,
413 .radio_addr = ADDR_UNSET,
414 },
415 [BTTV_BOARD_AVERMEDIA] = {
416 .name = "AVerMedia TVPhone",
417 .video_inputs = 3,
418 .audio_inputs = 1,
419 .tuner = 0,
420 .svhs = 3,
421 .muxsel = { 2, 3, 1, 1 },
422 .gpiomask = 0x0f,
423 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
424 /* 0x04 for some cards ?? */
425 .needs_tvaudio = 1,
426 .tuner_type = -1,
427 .tuner_addr = ADDR_UNSET,
428 .radio_addr = ADDR_UNSET,
429 .audio_hook = avermedia_tvphone_audio,
430 .has_remote = 1,
431 },
432 [BTTV_BOARD_MATRIX_VISION] = {
433 .name = "MATRIX-Vision MV-Delta",
434 .video_inputs = 5,
435 .audio_inputs = 1,
436 .tuner = -1,
437 .svhs = 3,
438 .gpiomask = 0,
439 .muxsel = { 2, 3, 1, 0, 0 },
440 .gpiomux = { 0 },
441 .needs_tvaudio = 1,
442 .tuner_type = -1,
443 .tuner_addr = ADDR_UNSET,
444 .radio_addr = ADDR_UNSET,
445 },
446
447 /* ---- card 0x08 ---------------------------------- */
448 [BTTV_BOARD_FLYVIDEO] = {
449 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
450 .video_inputs = 4,
451 .audio_inputs = 1,
452 .tuner = 0,
453 .svhs = 2,
454 .gpiomask = 0xc00,
455 .muxsel = { 2, 3, 1, 1 },
456 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
457 .gpiomute = 0xc00,
458 .needs_tvaudio = 1,
459 .pll = PLL_28,
460 .tuner_type = -1,
461 .tuner_addr = ADDR_UNSET,
462 .radio_addr = ADDR_UNSET,
463 },
464 [BTTV_BOARD_TURBOTV] = {
465 .name = "IMS/IXmicro TurboTV",
466 .video_inputs = 3,
467 .audio_inputs = 1,
468 .tuner = 0,
469 .svhs = 2,
470 .gpiomask = 3,
471 .muxsel = { 2, 3, 1, 1 },
472 .gpiomux = { 1, 1, 2, 3 },
473 .needs_tvaudio = 0,
474 .pll = PLL_28,
475 .tuner_type = TUNER_TEMIC_PAL,
476 .tuner_addr = ADDR_UNSET,
477 .radio_addr = ADDR_UNSET,
478 },
479 [BTTV_BOARD_HAUPPAUGE878] = {
480 .name = "Hauppauge (bt878)",
481 .video_inputs = 4,
482 .audio_inputs = 1,
483 .tuner = 0,
484 .svhs = 2,
485 .gpiomask = 0x0f, /* old: 7 */
486 .muxsel = { 2, 0, 1, 1 },
487 .gpiomux = { 0, 1, 2, 3 },
488 .gpiomute = 4,
489 .needs_tvaudio = 1,
490 .pll = PLL_28,
491 .tuner_type = -1,
492 .tuner_addr = ADDR_UNSET,
493 .radio_addr = ADDR_UNSET,
494 },
495 [BTTV_BOARD_MIROPRO] = {
496 .name = "MIRO PCTV pro",
497 .video_inputs = 3,
498 .audio_inputs = 1,
499 .tuner = 0,
500 .svhs = 2,
501 .gpiomask = 0x3014f,
502 .muxsel = { 2, 3, 1, 1 },
503 .gpiomux = { 0x20001,0x10001, 0, 0 },
504 .gpiomute = 10,
505 .needs_tvaudio = 1,
506 .tuner_type = -1,
507 .tuner_addr = ADDR_UNSET,
508 .radio_addr = ADDR_UNSET,
509 },
510
511 /* ---- card 0x0c ---------------------------------- */
512 [BTTV_BOARD_ADSTECH_TV] = {
513 .name = "ADS Technologies Channel Surfer TV (bt848)",
514 .video_inputs = 3,
515 .audio_inputs = 1,
516 .tuner = 0,
517 .svhs = 2,
518 .gpiomask = 15,
519 .muxsel = { 2, 3, 1, 1 },
520 .gpiomux = { 13, 14, 11, 7 },
521 .needs_tvaudio = 1,
522 .tuner_type = -1,
523 .tuner_addr = ADDR_UNSET,
524 .radio_addr = ADDR_UNSET,
525 },
526 [BTTV_BOARD_AVERMEDIA98] = {
527 .name = "AVerMedia TVCapture 98",
528 .video_inputs = 3,
529 .audio_inputs = 4,
530 .tuner = 0,
531 .svhs = 2,
532 .gpiomask = 15,
533 .muxsel = { 2, 3, 1, 1 },
534 .gpiomux = { 13, 14, 11, 7 },
535 .needs_tvaudio = 1,
536 .msp34xx_alt = 1,
537 .pll = PLL_28,
538 .tuner_type = TUNER_PHILIPS_PAL,
539 .tuner_addr = ADDR_UNSET,
540 .radio_addr = ADDR_UNSET,
541 .audio_hook = avermedia_tv_stereo_audio,
542 .no_gpioirq = 1,
543 },
544 [BTTV_BOARD_VHX] = {
545 .name = "Aimslab Video Highway Xtreme (VHX)",
546 .video_inputs = 3,
547 .audio_inputs = 1,
548 .tuner = 0,
549 .svhs = 2,
550 .gpiomask = 7,
551 .muxsel = { 2, 3, 1, 1 },
552 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
553 .gpiomute = 4,
554 .needs_tvaudio = 1,
555 .pll = PLL_28,
556 .tuner_type = -1,
557 .tuner_addr = ADDR_UNSET,
558 .radio_addr = ADDR_UNSET,
559 },
560 [BTTV_BOARD_ZOLTRIX] = {
561 .name = "Zoltrix TV-Max",
562 .video_inputs = 3,
563 .audio_inputs = 1,
564 .tuner = 0,
565 .svhs = 2,
566 .gpiomask = 15,
567 .muxsel = { 2, 3, 1, 1 },
568 .gpiomux = { 0, 0, 1, 0 },
569 .gpiomute = 10,
570 .needs_tvaudio = 1,
571 .tuner_type = -1,
572 .tuner_addr = ADDR_UNSET,
573 .radio_addr = ADDR_UNSET,
574 },
575
576 /* ---- card 0x10 ---------------------------------- */
577 [BTTV_BOARD_PIXVIEWPLAYTV] = {
578 .name = "Prolink Pixelview PlayTV (bt878)",
579 .video_inputs = 3,
580 .audio_inputs = 1,
581 .tuner = 0,
582 .svhs = 2,
583 .gpiomask = 0x01fe00,
584 .muxsel = { 2, 3, 1, 1 },
585 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
586 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
587 .gpiomute = 0x002000,
588 .needs_tvaudio = 1,
589 .pll = PLL_28,
590 .tuner_type = -1,
591 },
592 [BTTV_BOARD_WINVIEW_601] = {
593 .name = "Leadtek WinView 601",
594 .video_inputs = 3,
595 .audio_inputs = 1,
596 .tuner = 0,
597 .svhs = 2,
598 .gpiomask = 0x8300f8,
599 .muxsel = { 2, 3, 1, 1,0 },
600 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
601 .gpiomute = 0xcfa007,
602 .needs_tvaudio = 1,
603 .tuner_type = -1,
604 .tuner_addr = ADDR_UNSET,
605 .radio_addr = ADDR_UNSET,
606 .audio_hook = winview_audio,
607 .has_radio = 1,
608 },
609 [BTTV_BOARD_AVEC_INTERCAP] = {
610 .name = "AVEC Intercapture",
611 .video_inputs = 3,
612 .audio_inputs = 2,
613 .tuner = 0,
614 .svhs = 2,
615 .gpiomask = 0,
616 .muxsel = { 2, 3, 1, 1 },
617 .gpiomux = { 1, 0, 0, 0 },
618 .needs_tvaudio = 1,
619 .tuner_type = -1,
620 .tuner_addr = ADDR_UNSET,
621 .radio_addr = ADDR_UNSET,
622 },
623 [BTTV_BOARD_LIFE_FLYKIT] = {
624 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
625 .video_inputs = 4,
626 .audio_inputs = 1,
627 .tuner = -1,
628 .svhs = -1,
629 .gpiomask = 0x8dff00,
630 .muxsel = { 2, 3, 1, 1 },
631 .gpiomux = { 0 },
632 .no_msp34xx = 1,
633 .tuner_type = -1,
634 .tuner_addr = ADDR_UNSET,
635 .radio_addr = ADDR_UNSET,
636 },
637
638 /* ---- card 0x14 ---------------------------------- */
639 [BTTV_BOARD_CEI_RAFFLES] = {
640 .name = "CEI Raffles Card",
641 .video_inputs = 3,
642 .audio_inputs = 3,
643 .tuner = 0,
644 .svhs = 2,
645 .muxsel = { 2, 3, 1, 1 },
646 .tuner_type = -1,
647 .tuner_addr = ADDR_UNSET,
648 .radio_addr = ADDR_UNSET,
649 },
650 [BTTV_BOARD_CONFERENCETV] = {
651 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
652 .video_inputs = 4,
653 .audio_inputs = 2, /* tuner, line in */
654 .tuner = 0,
655 .svhs = 2,
656 .gpiomask = 0x1800,
657 .muxsel = { 2, 3, 1, 1 },
658 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
659 .gpiomute = 0x1800,
660 .pll = PLL_28,
661 .tuner_type = TUNER_PHILIPS_PAL_I,
662 .tuner_addr = ADDR_UNSET,
663 .radio_addr = ADDR_UNSET,
664 },
665 [BTTV_BOARD_PHOEBE_TVMAS] = {
666 .name = "Askey CPH050/ Phoebe Tv Master + FM",
667 .video_inputs = 3,
668 .audio_inputs = 1,
669 .tuner = 0,
670 .svhs = 2,
671 .gpiomask = 0xc00,
672 .muxsel = { 2, 3, 1, 1 },
673 .gpiomux = { 0, 1, 0x800, 0x400 },
674 .gpiomute = 0xc00,
675 .needs_tvaudio = 1,
676 .pll = PLL_28,
677 .tuner_type = -1,
678 .tuner_addr = ADDR_UNSET,
679 .radio_addr = ADDR_UNSET,
680 },
681 [BTTV_BOARD_MODTEC_205] = {
682 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
683 .video_inputs = 3,
684 .audio_inputs = 1,
685 .tuner = 0,
686 .svhs = -1,
687 .gpiomask = 7,
688 .muxsel = { 2, 3, -1 },
689 .digital_mode = DIGITAL_MODE_CAMERA,
690 .gpiomux = { 0, 0, 0, 0 },
691 .no_msp34xx = 1,
692 .pll = PLL_28,
693 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
694 .tuner_addr = ADDR_UNSET,
695 .radio_addr = ADDR_UNSET,
696 },
697
698 /* ---- card 0x18 ---------------------------------- */
699 [BTTV_BOARD_MAGICTVIEW061] = {
700 .name = "Askey CPH05X/06X (bt878) [many vendors]",
701 .video_inputs = 3,
702 .audio_inputs = 1,
703 .tuner = 0,
704 .svhs = 2,
705 .gpiomask = 0xe00,
706 .muxsel = { 2, 3, 1, 1 },
707 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
708 .gpiomute = 0xc00,
709 .needs_tvaudio = 1,
710 .pll = PLL_28,
711 .tuner_type = -1,
712 .tuner_addr = ADDR_UNSET,
713 .radio_addr = ADDR_UNSET,
714 .has_remote = 1,
715 },
716 [BTTV_BOARD_VOBIS_BOOSTAR] = {
717 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
718 .video_inputs = 3,
719 .audio_inputs = 1,
720 .tuner = 0,
721 .svhs = 2,
722 .gpiomask = 0x1f0fff,
723 .muxsel = { 2, 3, 1, 1 },
724 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
725 .gpiomute = 0x40000,
726 .needs_tvaudio = 0,
727 .tuner_type = TUNER_PHILIPS_PAL,
728 .tuner_addr = ADDR_UNSET,
729 .radio_addr = ADDR_UNSET,
730 .audio_hook = terratv_audio,
731 },
732 [BTTV_BOARD_HAUPPAUG_WCAM] = {
733 .name = "Hauppauge WinCam newer (bt878)",
734 .video_inputs = 4,
735 .audio_inputs = 1,
736 .tuner = 0,
737 .svhs = 3,
738 .gpiomask = 7,
739 .muxsel = { 2, 0, 1, 1 },
740 .gpiomux = { 0, 1, 2, 3 },
741 .gpiomute = 4,
742 .needs_tvaudio = 1,
743 .tuner_type = -1,
744 .tuner_addr = ADDR_UNSET,
745 .radio_addr = ADDR_UNSET,
746 },
747 [BTTV_BOARD_MAXI] = {
748 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
749 .video_inputs = 4,
750 .audio_inputs = 2,
751 .tuner = 0,
752 .svhs = 2,
753 .gpiomask = 0x1800,
754 .muxsel = { 2, 3, 1, 1 },
755 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
756 .gpiomute = 0x1800,
757 .pll = PLL_28,
758 .tuner_type = TUNER_PHILIPS_SECAM,
759 .tuner_addr = ADDR_UNSET,
760 .radio_addr = ADDR_UNSET,
761 },
762
763 /* ---- card 0x1c ---------------------------------- */
764 [BTTV_BOARD_TERRATV] = {
765 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
766 .video_inputs = 3,
767 .audio_inputs = 1,
768 .tuner = 0,
769 .svhs = 2,
770 .gpiomask = 0x1f0fff,
771 .muxsel = { 2, 3, 1, 1 },
772 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
773 .gpiomute = 0x40000,
774 .needs_tvaudio = 0,
775 .tuner_type = TUNER_PHILIPS_PAL,
776 .tuner_addr = ADDR_UNSET,
777 .radio_addr = ADDR_UNSET,
778 .audio_hook = terratv_audio,
779 /* GPIO wiring:
780 External 20 pin connector (for Active Radio Upgrade board)
781 gpio00: i2c-sda
782 gpio01: i2c-scl
783 gpio02: om5610-data
784 gpio03: om5610-clk
785 gpio04: om5610-wre
786 gpio05: om5610-stereo
787 gpio06: rds6588-davn
788 gpio07: Pin 7 n.c.
789 gpio08: nIOW
790 gpio09+10: nIOR, nSEL ?? (bt878)
791 gpio09: nIOR (bt848)
792 gpio10: nSEL (bt848)
793 Sound Routing:
794 gpio16: u2-A0 (1st 4052bt)
795 gpio17: u2-A1
796 gpio18: u2-nEN
797 gpio19: u4-A0 (2nd 4052)
798 gpio20: u4-A1
799 u4-nEN - GND
800 Btspy:
801 00000 : Cdrom (internal audio input)
802 10000 : ext. Video audio input
803 20000 : TV Mono
804 a0000 : TV Mono/2
805 1a0000 : TV Stereo
806 30000 : Radio
807 40000 : Mute
808 */
809
810 },
811 [BTTV_BOARD_PXC200] = {
812 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
813 .name = "Imagenation PXC200",
814 .video_inputs = 5,
815 .audio_inputs = 1,
816 .tuner = -1,
817 .svhs = 1, /* was: 4 */
818 .gpiomask = 0,
819 .muxsel = { 2, 3, 1, 0, 0},
820 .gpiomux = { 0 },
821 .needs_tvaudio = 1,
822 .tuner_type = -1,
823 .tuner_addr = ADDR_UNSET,
824 .radio_addr = ADDR_UNSET,
825 .muxsel_hook = PXC200_muxsel,
826
827 },
828 [BTTV_BOARD_FLYVIDEO_98] = {
829 .name = "Lifeview FlyVideo 98 LR50",
830 .video_inputs = 4,
831 .audio_inputs = 1,
832 .tuner = 0,
833 .svhs = 2,
834 .gpiomask = 0x1800, /* 0x8dfe00 */
835 .muxsel = { 2, 3, 1, 1 },
836 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
837 .gpiomute = 0x1800,
838 .pll = PLL_28,
839 .tuner_type = -1,
840 .tuner_addr = ADDR_UNSET,
841 .radio_addr = ADDR_UNSET,
842 },
843 [BTTV_BOARD_IPROTV] = {
844 .name = "Formac iProTV, Formac ProTV I (bt848)",
845 .video_inputs = 4,
846 .audio_inputs = 1,
847 .tuner = 0,
848 .svhs = 3,
849 .gpiomask = 1,
850 .muxsel = { 2, 3, 1, 1 },
851 .gpiomux = { 1, 0, 0, 0 },
852 .pll = PLL_28,
853 .tuner_type = TUNER_PHILIPS_PAL,
854 .tuner_addr = ADDR_UNSET,
855 .radio_addr = ADDR_UNSET,
856 },
857
858 /* ---- card 0x20 ---------------------------------- */
859 [BTTV_BOARD_INTEL_C_S_PCI] = {
860 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
861 .video_inputs = 4,
862 .audio_inputs = 0,
863 .tuner = -1,
864 .svhs = 2,
865 .gpiomask = 0,
866 .muxsel = { 2, 3, 1, 1 },
867 .gpiomux = { 0 },
868 .needs_tvaudio = 0,
869 .tuner_type = 4,
870 .tuner_addr = ADDR_UNSET,
871 .radio_addr = ADDR_UNSET,
872 },
873 [BTTV_BOARD_TERRATVALUE] = {
874 .name = "Terratec TerraTValue Version Bt878",
875 .video_inputs = 3,
876 .audio_inputs = 1,
877 .tuner = 0,
878 .svhs = 2,
879 .gpiomask = 0xffff00,
880 .muxsel = { 2, 3, 1, 1 },
881 .gpiomux = { 0x500, 0, 0x300, 0x900 },
882 .gpiomute = 0x900,
883 .needs_tvaudio = 1,
884 .pll = PLL_28,
885 .tuner_type = TUNER_PHILIPS_PAL,
886 .tuner_addr = ADDR_UNSET,
887 .radio_addr = ADDR_UNSET,
888 },
889 [BTTV_BOARD_WINFAST2000] = {
890 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
891 .video_inputs = 4,
892 .audio_inputs = 1,
893 .tuner = 0,
894 .svhs = 2,
895 .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
896 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
897 .gpiomask = 0xb33000,
898 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
899 .gpiomute = 0x800000,
900 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
901 gpio23 -- hef4052:nEnable (0x800000)
902 gpio12 -- hef4052:A1
903 gpio13 -- hef4052:A0
904 0x0000: external audio
905 0x1000: FM
906 0x2000: TV
907 0x3000: n.c.
908 Note: There exists another variant "Winfast 2000" with tv stereo !?
909 Note: eeprom only contains FF and pci subsystem id 107d:6606
910 */
911 .needs_tvaudio = 0,
912 .pll = PLL_28,
913 .has_radio = 1,
914 .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
915 .tuner_addr = ADDR_UNSET,
916 .radio_addr = ADDR_UNSET,
917 .audio_hook = winfast2000_audio,
918 .has_remote = 1,
919 },
920 [BTTV_BOARD_CHRONOS_VS2] = {
921 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
922 .video_inputs = 4,
923 .audio_inputs = 3,
924 .tuner = 0,
925 .svhs = 2,
926 .gpiomask = 0x1800,
927 .muxsel = { 2, 3, 1, 1 },
928 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
929 .gpiomute = 0x1800,
930 .pll = PLL_28,
931 .tuner_type = -1,
932 .tuner_addr = ADDR_UNSET,
933 .radio_addr = ADDR_UNSET,
934 },
935
936 /* ---- card 0x24 ---------------------------------- */
937 [BTTV_BOARD_TYPHOON_TVIEW] = {
938 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
939 .video_inputs = 4,
940 .audio_inputs = 3,
941 .tuner = 0,
942 .svhs = 2,
943 .gpiomask = 0x1800,
944 .muxsel = { 2, 3, 1, 1 },
945 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
946 .gpiomute = 0x1800,
947 .pll = PLL_28,
948 .tuner_type = -1,
949 .tuner_addr = ADDR_UNSET,
950 .radio_addr = ADDR_UNSET,
951 .has_radio = 1,
952 },
953 [BTTV_BOARD_PXELVWPLTVPRO] = {
954 .name = "Prolink PixelView PlayTV pro",
955 .video_inputs = 3,
956 .audio_inputs = 1,
957 .tuner = 0,
958 .svhs = 2,
959 .gpiomask = 0xff,
960 .muxsel = { 2, 3, 1, 1 },
961 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
962 .gpiomute = 0x29,
963 .no_msp34xx = 1,
964 .pll = PLL_28,
965 .tuner_type = -1,
966 .tuner_addr = ADDR_UNSET,
967 .radio_addr = ADDR_UNSET,
968 },
969 [BTTV_BOARD_MAGICTVIEW063] = {
970 .name = "Askey CPH06X TView99",
971 .video_inputs = 4,
972 .audio_inputs = 1,
973 .tuner = 0,
974 .svhs = 2,
975 .gpiomask = 0x551e00,
976 .muxsel = { 2, 3, 1, 0 },
977 .gpiomux = { 0x551400, 0x551200, 0, 0 },
978 .gpiomute = 0x551c00,
979 .needs_tvaudio = 1,
980 .pll = PLL_28,
981 .tuner_type = 1,
982 .tuner_addr = ADDR_UNSET,
983 .radio_addr = ADDR_UNSET,
984 .has_remote = 1,
985 },
986 [BTTV_BOARD_PINNACLE] = {
987 .name = "Pinnacle PCTV Studio/Rave",
988 .video_inputs = 3,
989 .audio_inputs = 1,
990 .tuner = 0,
991 .svhs = 2,
992 .gpiomask = 0x03000F,
993 .muxsel = { 2, 3, 1, 1 },
994 .gpiomux = { 2, 0xd0001, 0, 0 },
995 .gpiomute = 1,
996 .needs_tvaudio = 0,
997 .pll = PLL_28,
998 .tuner_type = -1,
999 .tuner_addr = ADDR_UNSET,
1000 .radio_addr = ADDR_UNSET,
1001 },
1002
1003 /* ---- card 0x28 ---------------------------------- */
1004 [BTTV_BOARD_STB2] = {
1005 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1006 .video_inputs = 3,
1007 .audio_inputs = 1,
1008 .tuner = 0,
1009 .svhs = 2,
1010 .gpiomask = 7,
1011 .muxsel = { 2, 3, 1, 1 },
1012 .gpiomux = { 4, 0, 2, 3 },
1013 .gpiomute = 1,
1014 .no_msp34xx = 1,
1015 .needs_tvaudio = 1,
1016 .tuner_type = TUNER_PHILIPS_NTSC,
1017 .tuner_addr = ADDR_UNSET,
1018 .radio_addr = ADDR_UNSET,
1019 .pll = PLL_28,
1020 .has_radio = 1,
1021 },
1022 [BTTV_BOARD_AVPHONE98] = {
1023 .name = "AVerMedia TVPhone 98",
1024 .video_inputs = 3,
1025 .audio_inputs = 4,
1026 .tuner = 0,
1027 .svhs = 2,
1028 .gpiomask = 15,
1029 .muxsel = { 2, 3, 1, 1 },
1030 .gpiomux = { 13, 4, 11, 7 },
1031 .needs_tvaudio = 1,
1032 .pll = PLL_28,
1033 .tuner_type = -1,
1034 .tuner_addr = ADDR_UNSET,
1035 .radio_addr = ADDR_UNSET,
1036 .has_radio = 1,
1037 .audio_hook = avermedia_tvphone_audio,
1038 },
1039 [BTTV_BOARD_PV951] = {
1040 .name = "ProVideo PV951", /* pic16c54 */
1041 .video_inputs = 3,
1042 .audio_inputs = 1,
1043 .tuner = 0,
1044 .svhs = 2,
1045 .gpiomask = 0,
1046 .muxsel = { 2, 3, 1, 1},
1047 .gpiomux = { 0, 0, 0, 0},
1048 .needs_tvaudio = 1,
1049 .no_msp34xx = 1,
1050 .pll = PLL_28,
1051 .tuner_type = 1,
1052 .tuner_addr = ADDR_UNSET,
1053 .radio_addr = ADDR_UNSET,
1054 },
1055 [BTTV_BOARD_ONAIR_TV] = {
1056 .name = "Little OnAir TV",
1057 .video_inputs = 3,
1058 .audio_inputs = 1,
1059 .tuner = 0,
1060 .svhs = 2,
1061 .gpiomask = 0xe00b,
1062 .muxsel = { 2, 3, 1, 1 },
1063 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1064 .gpiomute = 0xff3ffc,
1065 .no_msp34xx = 1,
1066 .tuner_type = -1,
1067 .tuner_addr = ADDR_UNSET,
1068 .radio_addr = ADDR_UNSET,
1069 },
1070
1071 /* ---- card 0x2c ---------------------------------- */
1072 [BTTV_BOARD_SIGMA_TVII_FM] = {
1073 .name = "Sigma TVII-FM",
1074 .video_inputs = 2,
1075 .audio_inputs = 1,
1076 .tuner = 0,
1077 .svhs = -1,
1078 .gpiomask = 3,
1079 .muxsel = { 2, 3, 1, 1 },
1080 .gpiomux = { 1, 1, 0, 2 },
1081 .gpiomute = 3,
1082 .no_msp34xx = 1,
1083 .pll = PLL_NONE,
1084 .tuner_type = -1,
1085 .tuner_addr = ADDR_UNSET,
1086 .radio_addr = ADDR_UNSET,
1087 },
1088 [BTTV_BOARD_MATRIX_VISION2] = {
1089 .name = "MATRIX-Vision MV-Delta 2",
1090 .video_inputs = 5,
1091 .audio_inputs = 1,
1092 .tuner = -1,
1093 .svhs = 3,
1094 .gpiomask = 0,
1095 .muxsel = { 2, 3, 1, 0, 0 },
1096 .gpiomux = { 0 },
1097 .no_msp34xx = 1,
1098 .pll = PLL_28,
1099 .tuner_type = -1,
1100 .tuner_addr = ADDR_UNSET,
1101 .radio_addr = ADDR_UNSET,
1102 },
1103 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1104 .name = "Zoltrix Genie TV/FM",
1105 .video_inputs = 3,
1106 .audio_inputs = 1,
1107 .tuner = 0,
1108 .svhs = 2,
1109 .gpiomask = 0xbcf03f,
1110 .muxsel = { 2, 3, 1, 1 },
1111 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1112 .gpiomute = 0xbcb03f,
1113 .no_msp34xx = 1,
1114 .pll = PLL_28,
1115 .tuner_type = 21,
1116 .tuner_addr = ADDR_UNSET,
1117 .radio_addr = ADDR_UNSET,
1118 },
1119 [BTTV_BOARD_TERRATVRADIO] = {
1120 .name = "Terratec TV/Radio+",
1121 .video_inputs = 3,
1122 .audio_inputs = 1,
1123 .tuner = 0,
1124 .svhs = 2,
1125 .gpiomask = 0x70000,
1126 .muxsel = { 2, 3, 1, 1 },
1127 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1128 .gpiomute = 0x40000,
1129 .needs_tvaudio = 1,
1130 .no_msp34xx = 1,
1131 .pll = PLL_35,
1132 .tuner_type = 1,
1133 .tuner_addr = ADDR_UNSET,
1134 .radio_addr = ADDR_UNSET,
1135 .has_radio = 1,
1136 },
1137
1138 /* ---- card 0x30 ---------------------------------- */
1139 [BTTV_BOARD_DYNALINK] = {
1140 .name = "Askey CPH03x/ Dynalink Magic TView",
1141 .video_inputs = 3,
1142 .audio_inputs = 1,
1143 .tuner = 0,
1144 .svhs = 2,
1145 .gpiomask = 15,
1146 .muxsel = { 2, 3, 1, 1 },
1147 .gpiomux = {2,0,0,0 },
1148 .gpiomute = 1,
1149 .needs_tvaudio = 1,
1150 .pll = PLL_28,
1151 .tuner_type = -1,
1152 .tuner_addr = ADDR_UNSET,
1153 .radio_addr = ADDR_UNSET,
1154 },
1155 [BTTV_BOARD_GVBCTV3PCI] = {
1156 .name = "IODATA GV-BCTV3/PCI",
1157 .video_inputs = 3,
1158 .audio_inputs = 1,
1159 .tuner = 0,
1160 .svhs = 2,
1161 .gpiomask = 0x010f00,
1162 .muxsel = {2, 3, 0, 0 },
1163 .gpiomux = {0x10000, 0, 0x10000, 0 },
1164 .no_msp34xx = 1,
1165 .pll = PLL_28,
1166 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1167 .tuner_addr = ADDR_UNSET,
1168 .radio_addr = ADDR_UNSET,
1169 .audio_hook = gvbctv3pci_audio,
1170 },
1171 [BTTV_BOARD_PXELVWPLTVPAK] = {
1172 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1173 .video_inputs = 5,
1174 .audio_inputs = 1,
1175 .tuner = 0,
1176 .svhs = 3,
1177 .gpiomask = 0xAA0000,
1178 .muxsel = { 2,3,1,1,-1 },
1179 .digital_mode = DIGITAL_MODE_CAMERA,
1180 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1181 .gpiomute = 0xa8000,
1182 .no_msp34xx = 1,
1183 .pll = PLL_28,
1184 .tuner_type = TUNER_PHILIPS_PAL_I,
1185 .tuner_addr = ADDR_UNSET,
1186 .radio_addr = ADDR_UNSET,
1187 .has_remote = 1,
1188 /* GPIO wiring: (different from Rev.4C !)
1189 GPIO17: U4.A0 (first hef4052bt)
1190 GPIO19: U4.A1
1191 GPIO20: U5.A1 (second hef4052bt)
1192 GPIO21: U4.nEN
1193 GPIO22: BT832 Reset Line
1194 GPIO23: A5,A0, U5,nEN
1195 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1196 */
1197 },
1198 [BTTV_BOARD_EAGLE] = {
1199 .name = "Eagle Wireless Capricorn2 (bt878A)",
1200 .video_inputs = 4,
1201 .audio_inputs = 1,
1202 .tuner = 0,
1203 .svhs = 2,
1204 .gpiomask = 7,
1205 .muxsel = { 2, 0, 1, 1 },
1206 .gpiomux = { 0, 1, 2, 3 },
1207 .gpiomute = 4,
1208 .pll = PLL_28,
1209 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1210 .tuner_addr = ADDR_UNSET,
1211 .radio_addr = ADDR_UNSET,
1212 },
1213
1214 /* ---- card 0x34 ---------------------------------- */
1215 [BTTV_BOARD_PINNACLEPRO] = {
1216 /* David Härdeman <david@2gen.com> */
1217 .name = "Pinnacle PCTV Studio Pro",
1218 .video_inputs = 4,
1219 .audio_inputs = 1,
1220 .tuner = 0,
1221 .svhs = 3,
1222 .gpiomask = 0x03000F,
1223 .muxsel = { 2, 3, 1, 1 },
1224 .gpiomux = { 1, 0xd0001, 0, 0 },
1225 .gpiomute = 10,
1226 /* sound path (5 sources):
1227 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1228 0= ext. Audio IN
1229 1= from MUX2
1230 2= Mono TV sound from Tuner
1231 3= not connected
1232 MUX2 (mask 0x30000):
1233 0,2,3= from MSP34xx
1234 1= FM stereo Radio from Tuner */
1235 .needs_tvaudio = 0,
1236 .pll = PLL_28,
1237 .tuner_type = -1,
1238 .tuner_addr = ADDR_UNSET,
1239 .radio_addr = ADDR_UNSET,
1240 },
1241 [BTTV_BOARD_TVIEW_RDS_FM] = {
1242 /* Claas Langbehn <claas@bigfoot.com>,
1243 Sven Grothklags <sven@upb.de> */
1244 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1245 .video_inputs = 4,
1246 .audio_inputs = 3,
1247 .tuner = 0,
1248 .svhs = 2,
1249 .gpiomask = 0x1c,
1250 .muxsel = { 2, 3, 1, 1 },
1251 .gpiomux = { 0, 0, 0x10, 8 },
1252 .gpiomute = 4,
1253 .needs_tvaudio = 1,
1254 .pll = PLL_28,
1255 .tuner_type = TUNER_PHILIPS_PAL,
1256 .tuner_addr = ADDR_UNSET,
1257 .radio_addr = ADDR_UNSET,
1258 .has_radio = 1,
1259 },
1260 [BTTV_BOARD_LIFETEC_9415] = {
1261 /* Tim Röstermundt <rosterm@uni-muenster.de>
1262 in de.comp.os.unix.linux.hardware:
1263 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1264 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1265 options tuner type=5 */
1266 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1267 .video_inputs = 4,
1268 .audio_inputs = 1,
1269 .tuner = 0,
1270 .svhs = 2,
1271 .gpiomask = 0x18e0,
1272 .muxsel = { 2, 3, 1, 1 },
1273 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1274 .gpiomute = 0x18e0,
1275 /* For cards with tda9820/tda9821:
1276 0x0000: Tuner normal stereo
1277 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1278 0x0880: Tuner A2 stereo */
1279 .pll = PLL_28,
1280 .tuner_type = -1,
1281 .tuner_addr = ADDR_UNSET,
1282 .radio_addr = ADDR_UNSET,
1283 },
1284 [BTTV_BOARD_BESTBUY_EASYTV] = {
1285 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1286 old Easy TV BT848 version (model CPH031) */
1287 .name = "Askey CPH031/ BESTBUY Easy TV",
1288 .video_inputs = 4,
1289 .audio_inputs = 1,
1290 .tuner = 0,
1291 .svhs = 2,
1292 .gpiomask = 0xF,
1293 .muxsel = { 2, 3, 1, 0 },
1294 .gpiomux = { 2, 0, 0, 0 },
1295 .gpiomute = 10,
1296 .needs_tvaudio = 0,
1297 .pll = PLL_28,
1298 .tuner_type = TUNER_TEMIC_PAL,
1299 .tuner_addr = ADDR_UNSET,
1300 .radio_addr = ADDR_UNSET,
1301 },
1302
1303 /* ---- card 0x38 ---------------------------------- */
1304 [BTTV_BOARD_FLYVIDEO_98FM] = {
1305 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1306 .name = "Lifeview FlyVideo 98FM LR50",
1307 .video_inputs = 4,
1308 .audio_inputs = 3,
1309 .tuner = 0,
1310 .svhs = 2,
1311 .gpiomask = 0x1800,
1312 .muxsel = { 2, 3, 1, 1 },
1313 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1314 .gpiomute = 0x1800,
1315 .pll = PLL_28,
1316 .tuner_type = 5,
1317 .tuner_addr = ADDR_UNSET,
1318 .radio_addr = ADDR_UNSET,
1319 },
1320 /* This is the ultimate cheapo capture card
1321 * just a BT848A on a small PCB!
1322 * Steve Hosgood <steve@equiinet.com> */
1323 [BTTV_BOARD_GRANDTEC] = {
1324 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1325 .video_inputs = 2,
1326 .audio_inputs = 0,
1327 .tuner = -1,
1328 .svhs = 1,
1329 .gpiomask = 0,
1330 .muxsel = { 3, 1 },
1331 .gpiomux = { 0 },
1332 .needs_tvaudio = 0,
1333 .no_msp34xx = 1,
1334 .pll = PLL_35,
1335 .tuner_type = -1,
1336 .tuner_addr = ADDR_UNSET,
1337 .radio_addr = ADDR_UNSET,
1338 },
1339 [BTTV_BOARD_ASKEY_CPH060] = {
1340 /* Daniel Herrington <daniel.herrington@home.com> */
1341 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1342 .video_inputs = 3,
1343 .audio_inputs = 1,
1344 .tuner = 0,
1345 .svhs = 2,
1346 .gpiomask = 0xe00,
1347 .muxsel = { 2, 3, 1, 1},
1348 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1349 .gpiomute = 0x800,
1350 .needs_tvaudio = 1,
1351 .pll = PLL_28,
1352 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1353 .tuner_addr = ADDR_UNSET,
1354 .radio_addr = ADDR_UNSET,
1355 },
1356 [BTTV_BOARD_ASKEY_CPH03X] = {
1357 /* Matti Mottus <mottus@physic.ut.ee> */
1358 .name = "Askey CPH03x TV Capturer",
1359 .video_inputs = 4,
1360 .audio_inputs = 1,
1361 .tuner = 0,
1362 .svhs = 2,
1363 .gpiomask = 0x03000F,
1364 .muxsel = { 2, 3, 1, 0 },
1365 .gpiomux = { 2, 0, 0, 0 },
1366 .gpiomute = 1,
1367 .pll = PLL_28,
1368 .tuner_type = 0,
1369 .tuner_addr = ADDR_UNSET,
1370 .radio_addr = ADDR_UNSET,
1371 },
1372
1373 /* ---- card 0x3c ---------------------------------- */
1374 [BTTV_BOARD_MM100PCTV] = {
1375 /* Philip Blundell <philb@gnu.org> */
1376 .name = "Modular Technology MM100PCTV",
1377 .video_inputs = 2,
1378 .audio_inputs = 2,
1379 .tuner = 0,
1380 .svhs = -1,
1381 .gpiomask = 11,
1382 .muxsel = { 2, 3, 1, 1 },
1383 .gpiomux = { 2, 0, 0, 1 },
1384 .gpiomute = 8,
1385 .pll = PLL_35,
1386 .tuner_type = TUNER_TEMIC_PAL,
1387 .tuner_addr = ADDR_UNSET,
1388 .radio_addr = ADDR_UNSET,
1389 },
1390 [BTTV_BOARD_GMV1] = {
1391 /* Adrian Cox <adrian@humboldt.co.uk */
1392 .name = "AG Electronics GMV1",
1393 .video_inputs = 2,
1394 .audio_inputs = 0,
1395 .tuner = -1,
1396 .svhs = 1,
1397 .gpiomask = 0xF,
1398 .muxsel = { 2, 2 },
1399 .gpiomux = { },
1400 .no_msp34xx = 1,
1401 .needs_tvaudio = 0,
1402 .pll = PLL_28,
1403 .tuner_type = -1,
1404 .tuner_addr = ADDR_UNSET,
1405 .radio_addr = ADDR_UNSET,
1406 },
1407 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1408 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1409 new Easy TV BT878 version (model CPH061)
1410 special thanks to Informatica Mieres for providing the card */
1411 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1412 .video_inputs = 3,
1413 .audio_inputs = 2,
1414 .tuner = 0,
1415 .svhs = 2,
1416 .gpiomask = 0xFF,
1417 .muxsel = { 2, 3, 1, 0 },
1418 .gpiomux = { 1, 0, 4, 4 },
1419 .gpiomute = 9,
1420 .needs_tvaudio = 0,
1421 .pll = PLL_28,
1422 .tuner_type = TUNER_PHILIPS_PAL,
1423 .tuner_addr = ADDR_UNSET,
1424 .radio_addr = ADDR_UNSET,
1425 },
1426 [BTTV_BOARD_ATI_TVWONDER] = {
1427 /* Lukas Gebauer <geby@volny.cz> */
1428 .name = "ATI TV-Wonder",
1429 .video_inputs = 3,
1430 .audio_inputs = 1,
1431 .tuner = 0,
1432 .svhs = 2,
1433 .gpiomask = 0xf03f,
1434 .muxsel = { 2, 3, 1, 0 },
1435 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1436 .gpiomute = 0xbffe,
1437 .pll = PLL_28,
1438 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1439 .tuner_addr = ADDR_UNSET,
1440 .radio_addr = ADDR_UNSET,
1441 },
1442
1443 /* ---- card 0x40 ---------------------------------- */
1444 [BTTV_BOARD_ATI_TVWONDERVE] = {
1445 /* Lukas Gebauer <geby@volny.cz> */
1446 .name = "ATI TV-Wonder VE",
1447 .video_inputs = 2,
1448 .audio_inputs = 1,
1449 .tuner = 0,
1450 .svhs = -1,
1451 .gpiomask = 1,
1452 .muxsel = { 2, 3, 0, 1 },
1453 .gpiomux = { 0, 0, 1, 0 },
1454 .no_msp34xx = 1,
1455 .pll = PLL_28,
1456 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1457 .tuner_addr = ADDR_UNSET,
1458 .radio_addr = ADDR_UNSET,
1459 },
1460 [BTTV_BOARD_FLYVIDEO2000] = {
1461 /* DeeJay <deejay@westel900.net (2000S) */
1462 .name = "Lifeview FlyVideo 2000S LR90",
1463 .video_inputs = 3,
1464 .audio_inputs = 3,
1465 .tuner = 0,
1466 .svhs = 2,
1467 .gpiomask = 0x18e0,
1468 .muxsel = { 2, 3, 0, 1 },
1469 /* Radio changed from 1e80 to 0x800 to make
1470 FlyVideo2000S in .hu happy (gm)*/
1471 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1472 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1473 .gpiomute = 0x1800,
1474 .audio_hook = fv2000s_audio,
1475 .no_msp34xx = 1,
1476 .no_tda9875 = 1,
1477 .needs_tvaudio = 1,
1478 .pll = PLL_28,
1479 .tuner_type = 5,
1480 .tuner_addr = ADDR_UNSET,
1481 .radio_addr = ADDR_UNSET,
1482 },
1483 [BTTV_BOARD_TERRATVALUER] = {
1484 .name = "Terratec TValueRadio",
1485 .video_inputs = 3,
1486 .audio_inputs = 1,
1487 .tuner = 0,
1488 .svhs = 2,
1489 .gpiomask = 0xffff00,
1490 .muxsel = { 2, 3, 1, 1 },
1491 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1492 .gpiomute = 0x900,
1493 .needs_tvaudio = 1,
1494 .pll = PLL_28,
1495 .tuner_type = TUNER_PHILIPS_PAL,
1496 .tuner_addr = ADDR_UNSET,
1497 .radio_addr = ADDR_UNSET,
1498 .has_radio = 1,
1499 },
1500 [BTTV_BOARD_GVBCTV4PCI] = {
1501 /* TANAKA Kei <peg00625@nifty.com> */
1502 .name = "IODATA GV-BCTV4/PCI",
1503 .video_inputs = 3,
1504 .audio_inputs = 1,
1505 .tuner = 0,
1506 .svhs = 2,
1507 .gpiomask = 0x010f00,
1508 .muxsel = {2, 3, 0, 0 },
1509 .gpiomux = {0x10000, 0, 0x10000, 0 },
1510 .no_msp34xx = 1,
1511 .pll = PLL_28,
1512 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1513 .tuner_addr = ADDR_UNSET,
1514 .radio_addr = ADDR_UNSET,
1515 .audio_hook = gvbctv3pci_audio,
1516 },
1517
1518 /* ---- card 0x44 ---------------------------------- */
1519 [BTTV_BOARD_VOODOOTV_FM] = {
1520 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1521 /* try "insmod msp3400 simple=0" if you have
1522 * sound problems with this card. */
1523 .video_inputs = 4,
1524 .audio_inputs = 1,
1525 .tuner = 0,
1526 .svhs = -1,
1527 .gpiomask = 0x4f8a00,
1528 /* 0x100000: 1=MSP enabled (0=disable again)
1529 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1530 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1531 .gpiomute = 0x947fff,
1532 /* tvtuner, radio, external,internal, mute, stereo
1533 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1534 .muxsel = { 2, 3 ,0 ,1 },
1535 .tuner_type = TUNER_MT2032,
1536 .tuner_addr = ADDR_UNSET,
1537 .radio_addr = ADDR_UNSET,
1538 .pll = PLL_28,
1539 .has_radio = 1,
1540 },
1541 [BTTV_BOARD_AIMMS] = {
1542 /* Philip Blundell <pb@nexus.co.uk> */
1543 .name = "Active Imaging AIMMS",
1544 .video_inputs = 1,
1545 .audio_inputs = 0,
1546 .tuner = -1,
1547 .tuner_type = -1,
1548 .tuner_addr = ADDR_UNSET,
1549 .radio_addr = ADDR_UNSET,
1550 .pll = PLL_28,
1551 .muxsel = { 2 },
1552 .gpiomask = 0
1553 },
1554 [BTTV_BOARD_PV_BT878P_PLUS] = {
1555 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1556 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1557 .video_inputs = 3,
1558 .audio_inputs = 4,
1559 .tuner = 0,
1560 .svhs = 2,
1561 .gpiomask = 15,
1562 .muxsel = { 2, 3, 1, 1 },
1563 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1564 .gpiomute = 13,
1565 .needs_tvaudio = 1,
1566 .pll = PLL_28,
1567 .tuner_type = 25,
1568 .tuner_addr = ADDR_UNSET,
1569 .radio_addr = ADDR_UNSET,
1570 .has_remote = 1,
1571 /* GPIO wiring:
1572 GPIO0: U4.A0 (hef4052bt)
1573 GPIO1: U4.A1
1574 GPIO2: U4.A1 (second hef4052bt)
1575 GPIO3: U4.nEN, U5.A0, A5.nEN
1576 GPIO8-15: vrd866b ?
1577 */
1578 },
1579 [BTTV_BOARD_FLYVIDEO98EZ] = {
1580 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1581 .video_inputs = 4,
1582 .audio_inputs = 0,
1583 .tuner = -1,
1584 .svhs = 2,
1585 .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1586 .pll = PLL_28,
1587 .no_msp34xx = 1,
1588 .tuner_type = UNSET,
1589 .tuner_addr = ADDR_UNSET,
1590 .radio_addr = ADDR_UNSET,
1591 },
1592
1593 /* ---- card 0x48 ---------------------------------- */
1594 [BTTV_BOARD_PV_BT878P_9B] = {
1595 /* Dariusz Kowalewski <darekk@automex.pl> */
1596 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1597 .video_inputs = 4,
1598 .audio_inputs = 1,
1599 .tuner = 0,
1600 .svhs = 2,
1601 .gpiomask = 0x3f,
1602 .muxsel = { 2, 3, 1, 1 },
1603 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1604 .gpiomute = 0x09,
1605 .needs_tvaudio = 1,
1606 .no_msp34xx = 1,
1607 .no_tda9875 = 1,
1608 .pll = PLL_28,
1609 .tuner_type = 5,
1610 .tuner_addr = ADDR_UNSET,
1611 .radio_addr = ADDR_UNSET,
1612 .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
1613 .has_radio = 1, /* Note: not all cards have radio */
1614 .has_remote = 1,
1615 /* GPIO wiring:
1616 GPIO0: A0 hef4052
1617 GPIO1: A1 hef4052
1618 GPIO3: nEN hef4052
1619 GPIO8-15: vrd866b
1620 GPIO20,22,23: R30,R29,R28
1621 */
1622 },
1623 [BTTV_BOARD_SENSORAY311] = {
1624 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1625 /* you must jumper JP5 for the card to work */
1626 .name = "Sensoray 311",
1627 .video_inputs = 5,
1628 .audio_inputs = 0,
1629 .tuner = -1,
1630 .svhs = 4,
1631 .gpiomask = 0,
1632 .muxsel = { 2, 3, 1, 0, 0 },
1633 .gpiomux = { 0 },
1634 .needs_tvaudio = 0,
1635 .tuner_type = -1,
1636 .tuner_addr = ADDR_UNSET,
1637 .radio_addr = ADDR_UNSET,
1638 },
1639 [BTTV_BOARD_RV605] = {
1640 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1641 .name = "RemoteVision MX (RV605)",
1642 .video_inputs = 16,
1643 .audio_inputs = 0,
1644 .tuner = -1,
1645 .svhs = -1,
1646 .gpiomask = 0x00,
1647 .gpiomask2 = 0x07ff,
1648 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1649 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1650 .no_msp34xx = 1,
1651 .no_tda9875 = 1,
1652 .tuner_type = -1,
1653 .tuner_addr = ADDR_UNSET,
1654 .radio_addr = ADDR_UNSET,
1655 .muxsel_hook = rv605_muxsel,
1656 },
1657 [BTTV_BOARD_POWERCLR_MTV878] = {
1658 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1659 .video_inputs = 3,
1660 .audio_inputs = 2,
1661 .tuner = 0,
1662 .svhs = 2,
1663 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1664 .muxsel = { 2, 1, 1, },
1665 .gpiomux = { 0, 1, 2, 2 },
1666 .gpiomute = 4,
1667 .needs_tvaudio = 0,
1668 .tuner_type = TUNER_PHILIPS_PAL,
1669 .tuner_addr = ADDR_UNSET,
1670 .radio_addr = ADDR_UNSET,
1671 .pll = PLL_28,
1672 .has_radio = 1,
1673 },
1674
1675 /* ---- card 0x4c ---------------------------------- */
1676 [BTTV_BOARD_WINDVR] = {
1677 /* Masaki Suzuki <masaki@btree.org> */
1678 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1679 .video_inputs = 3,
1680 .audio_inputs = 1,
1681 .tuner = 0,
1682 .svhs = 2,
1683 .gpiomask = 0x140007,
1684 .muxsel = { 2, 3, 1, 1 },
1685 .gpiomux = { 0, 1, 2, 3 },
1686 .gpiomute = 4,
1687 .tuner_type = TUNER_PHILIPS_NTSC,
1688 .tuner_addr = ADDR_UNSET,
1689 .radio_addr = ADDR_UNSET,
1690 .audio_hook = windvr_audio,
1691 },
1692 [BTTV_BOARD_GRANDTEC_MULTI] = {
1693 .name = "GrandTec Multi Capture Card (Bt878)",
1694 .video_inputs = 4,
1695 .audio_inputs = 0,
1696 .tuner = -1,
1697 .svhs = -1,
1698 .gpiomask = 0,
1699 .muxsel = { 2, 3, 1, 0 },
1700 .gpiomux = { 0 },
1701 .needs_tvaudio = 0,
1702 .no_msp34xx = 1,
1703 .pll = PLL_28,
1704 .tuner_type = -1,
1705 .tuner_addr = ADDR_UNSET,
1706 .radio_addr = ADDR_UNSET,
1707 },
1708 [BTTV_BOARD_KWORLD] = {
1709 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1710 .video_inputs = 4,
1711 .audio_inputs = 3,
1712 .tuner = 0,
1713 .svhs = 2,
1714 .gpiomask = 7,
1715 .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1716 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1717 * This card lacks external Audio In, so we mute it on Ext. & Int.
1718 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1719 * This card lacks PCI subsystem ID, sigh.
1720 * gpiomux =1: lower volume, 2+3: mute
1721 * btwincap uses 0x80000/0x80003
1722 */
1723 .gpiomute = 4,
1724 .needs_tvaudio = 0,
1725 .no_msp34xx = 1,
1726 .pll = PLL_28,
1727 .tuner_type = 5,
1728 .tuner_addr = ADDR_UNSET,
1729 .radio_addr = ADDR_UNSET,
1730 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1731 radio signal strength indicators work fine. */
1732 .has_radio = 1,
1733 /* GPIO Info:
1734 GPIO0,1: HEF4052 A0,A1
1735 GPIO2: HEF4052 nENABLE
1736 GPIO3-7: n.c.
1737 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1738 GPIO14,15: ??
1739 GPIO16-21: n.c.
1740 GPIO22,23: ??
1741 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1742 },
1743 [BTTV_BOARD_DSP_TCVIDEO] = {
1744 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1745 .name = "DSP Design TCVIDEO",
1746 .video_inputs = 4,
1747 .svhs = -1,
1748 .muxsel = { 2, 3, 1, 0 },
1749 .pll = PLL_28,
1750 .tuner_type = -1,
1751 .tuner_addr = ADDR_UNSET,
1752 .radio_addr = ADDR_UNSET,
1753 },
1754
1755 /* ---- card 0x50 ---------------------------------- */
1756 [BTTV_BOARD_HAUPPAUGEPVR] = {
1757 .name = "Hauppauge WinTV PVR",
1758 .video_inputs = 4,
1759 .audio_inputs = 1,
1760 .tuner = 0,
1761 .svhs = 2,
1762 .muxsel = { 2, 0, 1, 1 },
1763 .needs_tvaudio = 1,
1764 .pll = PLL_28,
1765 .tuner_type = -1,
1766 .tuner_addr = ADDR_UNSET,
1767 .radio_addr = ADDR_UNSET,
1768
1769 .gpiomask = 7,
1770 .gpiomux = {7},
1771 },
1772 [BTTV_BOARD_GVBCTV5PCI] = {
1773 .name = "IODATA GV-BCTV5/PCI",
1774 .video_inputs = 3,
1775 .audio_inputs = 1,
1776 .tuner = 0,
1777 .svhs = 2,
1778 .gpiomask = 0x0f0f80,
1779 .muxsel = {2, 3, 1, 0 },
1780 .gpiomux = {0x030000, 0x010000, 0, 0 },
1781 .gpiomute = 0x020000,
1782 .no_msp34xx = 1,
1783 .pll = PLL_28,
1784 .tuner_type = TUNER_PHILIPS_NTSC_M,
1785 .tuner_addr = ADDR_UNSET,
1786 .radio_addr = ADDR_UNSET,
1787 .audio_hook = gvbctv5pci_audio,
1788 .has_radio = 1,
1789 },
1790 [BTTV_BOARD_OSPREY1x0] = {
1791 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1792 .video_inputs = 4, /* id-inputs-clock */
1793 .audio_inputs = 0,
1794 .tuner = -1,
1795 .svhs = 3,
1796 .muxsel = { 3, 2, 0, 1 },
1797 .pll = PLL_28,
1798 .tuner_type = -1,
1799 .tuner_addr = ADDR_UNSET,
1800 .radio_addr = ADDR_UNSET,
1801 .no_msp34xx = 1,
1802 .no_tda9875 = 1,
1803 .no_tda7432 = 1,
1804 },
1805 [BTTV_BOARD_OSPREY1x0_848] = {
1806 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1807 .video_inputs = 3,
1808 .audio_inputs = 0,
1809 .tuner = -1,
1810 .svhs = 2,
1811 .muxsel = { 2, 3, 1 },
1812 .pll = PLL_28,
1813 .tuner_type = -1,
1814 .tuner_addr = ADDR_UNSET,
1815 .radio_addr = ADDR_UNSET,
1816 .no_msp34xx = 1,
1817 .no_tda9875 = 1,
1818 .no_tda7432 = 1,
1819 },
1820
1821 /* ---- card 0x54 ---------------------------------- */
1822 [BTTV_BOARD_OSPREY101_848] = {
1823 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1824 .video_inputs = 2,
1825 .audio_inputs = 0,
1826 .tuner = -1,
1827 .svhs = 1,
1828 .muxsel = { 3, 1 },
1829 .pll = PLL_28,
1830 .tuner_type = -1,
1831 .tuner_addr = ADDR_UNSET,
1832 .radio_addr = ADDR_UNSET,
1833 .no_msp34xx = 1,
1834 .no_tda9875 = 1,
1835 .no_tda7432 = 1,
1836 },
1837 [BTTV_BOARD_OSPREY1x1] = {
1838 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1839 .video_inputs = 1,
1840 .audio_inputs = 0,
1841 .tuner = -1,
1842 .svhs = -1,
1843 .muxsel = { 0 },
1844 .pll = PLL_28,
1845 .tuner_type = -1,
1846 .tuner_addr = ADDR_UNSET,
1847 .radio_addr = ADDR_UNSET,
1848 .no_msp34xx = 1,
1849 .no_tda9875 = 1,
1850 .no_tda7432 = 1,
1851 },
1852 [BTTV_BOARD_OSPREY1x1_SVID] = {
1853 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1854 .video_inputs = 2,
1855 .audio_inputs = 0,
1856 .tuner = -1,
1857 .svhs = 1,
1858 .muxsel = { 0, 1 },
1859 .pll = PLL_28,
1860 .tuner_type = -1,
1861 .tuner_addr = ADDR_UNSET,
1862 .radio_addr = ADDR_UNSET,
1863 .no_msp34xx = 1,
1864 .no_tda9875 = 1,
1865 .no_tda7432 = 1,
1866 },
1867 [BTTV_BOARD_OSPREY2xx] = {
1868 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1869 .video_inputs = 1,
1870 .audio_inputs = 1,
1871 .tuner = -1,
1872 .svhs = -1,
1873 .muxsel = { 0 },
1874 .pll = PLL_28,
1875 .tuner_type = UNSET,
1876 .tuner_addr = ADDR_UNSET,
1877 .radio_addr = ADDR_UNSET,
1878 .no_msp34xx = 1,
1879 .no_tda9875 = 1,
1880 .no_tda7432 = 1,
1881 },
1882
1883 /* ---- card 0x58 ---------------------------------- */
1884 [BTTV_BOARD_OSPREY2x0_SVID] = {
1885 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1886 .video_inputs = 2,
1887 .audio_inputs = 1,
1888 .tuner = -1,
1889 .svhs = 1,
1890 .muxsel = { 0, 1 },
1891 .pll = PLL_28,
1892 .tuner_type = UNSET,
1893 .tuner_addr = ADDR_UNSET,
1894 .radio_addr = ADDR_UNSET,
1895 .no_msp34xx = 1,
1896 .no_tda9875 = 1,
1897 .no_tda7432 = 1,
1898 },
1899 [BTTV_BOARD_OSPREY2x0] = {
1900 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1901 .video_inputs = 2,
1902 .audio_inputs = 1,
1903 .tuner = -1,
1904 .svhs = 1,
1905 .muxsel = { 2, 3 },
1906 .pll = PLL_28,
1907 .tuner_type = UNSET,
1908 .tuner_addr = ADDR_UNSET,
1909 .radio_addr = ADDR_UNSET,
1910 .no_msp34xx = 1,
1911 .no_tda9875 = 1,
1912 .no_tda7432 = 1,
1913 },
1914 [BTTV_BOARD_OSPREY500] = {
1915 .name = "Osprey 500", /* 500 */
1916 .video_inputs = 2,
1917 .audio_inputs = 1,
1918 .tuner = -1,
1919 .svhs = 1,
1920 .muxsel = { 2, 3 },
1921 .pll = PLL_28,
1922 .tuner_type = -1,
1923 .tuner_addr = ADDR_UNSET,
1924 .radio_addr = ADDR_UNSET,
1925 .no_msp34xx = 1,
1926 .no_tda9875 = 1,
1927 .no_tda7432 = 1,
1928 },
1929 [BTTV_BOARD_OSPREY540] = {
1930 .name = "Osprey 540", /* 540 */
1931 .video_inputs = 4,
1932 .audio_inputs = 1,
1933 .tuner = -1,
1934 .pll = PLL_28,
1935 .tuner_type = -1,
1936 .tuner_addr = ADDR_UNSET,
1937 .radio_addr = ADDR_UNSET,
1938 .no_msp34xx = 1,
1939 .no_tda9875 = 1,
1940 .no_tda7432 = 1,
1941 },
1942
1943 /* ---- card 0x5C ---------------------------------- */
1944 [BTTV_BOARD_OSPREY2000] = {
1945 .name = "Osprey 2000", /* 2000 */
1946 .video_inputs = 2,
1947 .audio_inputs = 1,
1948 .tuner = -1,
1949 .svhs = 1,
1950 .muxsel = { 2, 3 },
1951 .pll = PLL_28,
1952 .tuner_type = UNSET,
1953 .tuner_addr = ADDR_UNSET,
1954 .radio_addr = ADDR_UNSET,
1955 .no_msp34xx = 1,
1956 .no_tda9875 = 1,
1957 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1958 },
1959 [BTTV_BOARD_IDS_EAGLE] = {
1960 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1961 .name = "IDS Eagle",
1962 .video_inputs = 4,
1963 .audio_inputs = 0,
1964 .tuner = -1,
1965 .tuner_type = -1,
1966 .tuner_addr = ADDR_UNSET,
1967 .radio_addr = ADDR_UNSET,
1968 .svhs = -1,
1969 .gpiomask = 0,
1970 .muxsel = { 0, 1, 2, 3 },
1971 .muxsel_hook = eagle_muxsel,
1972 .no_msp34xx = 1,
1973 .no_tda9875 = 1,
1974 .pll = PLL_28,
1975 },
1976 [BTTV_BOARD_PINNACLESAT] = {
1977 .name = "Pinnacle PCTV Sat",
1978 .video_inputs = 2,
1979 .audio_inputs = 0,
1980 .svhs = 1,
1981 .tuner = -1,
1982 .tuner_type = -1,
1983 .tuner_addr = ADDR_UNSET,
1984 .radio_addr = ADDR_UNSET,
1985 .no_msp34xx = 1,
1986 .no_tda9875 = 1,
1987 .no_tda7432 = 1,
1988 .muxsel = { 3, 1 },
1989 .pll = PLL_28,
1990 .no_gpioirq = 1,
1991 .has_dvb = 1,
1992 },
1993 [BTTV_BOARD_FORMAC_PROTV] = {
1994 .name = "Formac ProTV II (bt878)",
1995 .video_inputs = 4,
1996 .audio_inputs = 1,
1997 .tuner = 0,
1998 .svhs = 3,
1999 .gpiomask = 2,
2000 /* TV, Comp1, Composite over SVID con, SVID */
2001 .muxsel = { 2, 3, 1, 1 },
2002 .gpiomux = { 2, 2, 0, 0 },
2003 .pll = PLL_28,
2004 .has_radio = 1,
2005 .tuner_type = TUNER_PHILIPS_PAL,
2006 .tuner_addr = ADDR_UNSET,
2007 .radio_addr = ADDR_UNSET,
2008 /* sound routing:
2009 GPIO=0x00,0x01,0x03: mute (?)
2010 0x02: both TV and radio (tuner: FM1216/I)
2011 The card has onboard audio connectors labeled "cdrom" and "board",
2012 not soldered here, though unknown wiring.
2013 Card lacks: external audio in, pci subsystem id.
2014 */
2015 },
2016
2017 /* ---- card 0x60 ---------------------------------- */
2018 [BTTV_BOARD_MACHTV] = {
2019 .name = "MachTV",
2020 .video_inputs = 3,
2021 .audio_inputs = 1,
2022 .tuner = 0,
2023 .svhs = -1,
2024 .gpiomask = 7,
2025 .muxsel = { 2, 3, 1, 1},
2026 .gpiomux = { 0, 1, 2, 3},
2027 .gpiomute = 4,
2028 .needs_tvaudio = 1,
2029 .tuner_type = 5,
2030 .tuner_addr = ADDR_UNSET,
2031 .radio_addr = ADDR_UNSET,
2032 .pll = PLL_28,
2033 },
2034 [BTTV_BOARD_EURESYS_PICOLO] = {
2035 .name = "Euresys Picolo",
2036 .video_inputs = 3,
2037 .audio_inputs = 0,
2038 .tuner = -1,
2039 .svhs = 2,
2040 .gpiomask = 0,
2041 .no_msp34xx = 1,
2042 .no_tda9875 = 1,
2043 .no_tda7432 = 1,
2044 .muxsel = { 2, 0, 1},
2045 .pll = PLL_28,
2046 .tuner_type = UNSET,
2047 .tuner_addr = ADDR_UNSET,
2048 .radio_addr = ADDR_UNSET,
2049 },
2050 [BTTV_BOARD_PV150] = {
2051 /* Luc Van Hoeylandt <luc@e-magic.be> */
2052 .name = "ProVideo PV150", /* 0x4f */
2053 .video_inputs = 2,
2054 .audio_inputs = 0,
2055 .tuner = -1,
2056 .svhs = -1,
2057 .gpiomask = 0,
2058 .muxsel = { 2, 3 },
2059 .gpiomux = { 0 },
2060 .needs_tvaudio = 0,
2061 .no_msp34xx = 1,
2062 .pll = PLL_28,
2063 .tuner_type = UNSET,
2064 .tuner_addr = ADDR_UNSET,
2065 .radio_addr = ADDR_UNSET,
2066 },
2067 [BTTV_BOARD_AD_TVK503] = {
2068 /* Hiroshi Takekawa <sian@big.or.jp> */
2069 /* This card lacks subsystem ID */
2070 .name = "AD-TVK503", /* 0x63 */
2071 .video_inputs = 4,
2072 .audio_inputs = 1,
2073 .tuner = 0,
2074 .svhs = 2,
2075 .gpiomask = 0x001e8007,
2076 .muxsel = { 2, 3, 1, 0 },
2077 /* Tuner, Radio, external, internal, off, on */
2078 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
2079 .gpiomute = 0x0f,
2080 .needs_tvaudio = 0,
2081 .no_msp34xx = 1,
2082 .pll = PLL_28,
2083 .tuner_type = 2,
2084 .tuner_addr = ADDR_UNSET,
2085 .radio_addr = ADDR_UNSET,
2086 .audio_hook = adtvk503_audio,
2087 },
2088
2089 /* ---- card 0x64 ---------------------------------- */
2090 [BTTV_BOARD_HERCULES_SM_TV] = {
2091 .name = "Hercules Smart TV Stereo",
2092 .video_inputs = 4,
2093 .audio_inputs = 1,
2094 .tuner = 0,
2095 .svhs = 2,
2096 .gpiomask = 0x00,
2097 .muxsel = { 2, 3, 1, 1 },
2098 .needs_tvaudio = 1,
2099 .no_msp34xx = 1,
2100 .pll = PLL_28,
2101 .tuner_type = 5,
2102 .tuner_addr = ADDR_UNSET,
2103 .radio_addr = ADDR_UNSET,
2104 /* Notes:
2105 - card lacks subsystem ID
2106 - stereo variant w/ daughter board with tda9874a @0xb0
2107 - Audio Routing:
2108 always from tda9874 independent of GPIO (?)
2109 external line in: unknown
2110 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2111 hef4053 (instead 4052) for unknown function
2112 */
2113 },
2114 [BTTV_BOARD_PACETV] = {
2115 .name = "Pace TV & Radio Card",
2116 .video_inputs = 4,
2117 .audio_inputs = 1,
2118 .tuner = 0,
2119 .svhs = 2,
2120 .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2121 .gpiomask = 0,
2122 .no_tda9875 = 1,
2123 .no_tda7432 = 1,
2124 .tuner_type = 1,
2125 .tuner_addr = ADDR_UNSET,
2126 .radio_addr = ADDR_UNSET,
2127 .has_radio = 1,
2128 .pll = PLL_28,
2129 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2130 only internal line out: (4pin header) RGGL
2131 Radio must be decoded by msp3410d (not routed through)*/
2132 /*
2133 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2134 */
2135 },
2136 [BTTV_BOARD_IVC200] = {
2137 /* Chris Willing <chris@vislab.usyd.edu.au> */
2138 .name = "IVC-200",
2139 .video_inputs = 1,
2140 .audio_inputs = 0,
2141 .tuner = -1,
2142 .tuner_type = -1,
2143 .tuner_addr = ADDR_UNSET,
2144 .radio_addr = ADDR_UNSET,
2145 .svhs = -1,
2146 .gpiomask = 0xdf,
2147 .muxsel = { 2 },
2148 .pll = PLL_28,
2149 },
2150 [BTTV_BOARD_XGUARD] = {
2151 .name = "Grand X-Guard / Trust 814PCI",
2152 .video_inputs = 16,
2153 .audio_inputs = 0,
2154 .tuner = -1,
2155 .svhs = -1,
2156 .tuner_type = 4,
2157 .tuner_addr = ADDR_UNSET,
2158 .radio_addr = ADDR_UNSET,
2159 .gpiomask2 = 0xff,
2160 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2161 .muxsel_hook = xguard_muxsel,
2162 .no_msp34xx = 1,
2163 .no_tda9875 = 1,
2164 .no_tda7432 = 1,
2165 .pll = PLL_28,
2166 },
2167
2168 /* ---- card 0x68 ---------------------------------- */
2169 [BTTV_BOARD_NEBULA_DIGITV] = {
2170 .name = "Nebula Electronics DigiTV",
2171 .video_inputs = 1,
2172 .tuner = -1,
2173 .svhs = -1,
2174 .muxsel = { 2, 3, 1, 0 },
2175 .no_msp34xx = 1,
2176 .no_tda9875 = 1,
2177 .no_tda7432 = 1,
2178 .pll = PLL_28,
2179 .tuner_type = -1,
2180 .tuner_addr = ADDR_UNSET,
2181 .radio_addr = ADDR_UNSET,
2182 .has_dvb = 1,
2183 .has_remote = 1,
2184 .gpiomask = 0x1b,
2185 .no_gpioirq = 1,
2186 },
2187 [BTTV_BOARD_PV143] = {
2188 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2189 .name = "ProVideo PV143",
2190 .video_inputs = 4,
2191 .audio_inputs = 0,
2192 .tuner = -1,
2193 .svhs = -1,
2194 .gpiomask = 0,
2195 .muxsel = { 2, 3, 1, 0 },
2196 .gpiomux = { 0 },
2197 .needs_tvaudio = 0,
2198 .no_msp34xx = 1,
2199 .pll = PLL_28,
2200 .tuner_type = -1,
2201 .tuner_addr = ADDR_UNSET,
2202 .radio_addr = ADDR_UNSET,
2203 },
2204 [BTTV_BOARD_VD009X1_MINIDIN] = {
2205 /* M.Klahr@phytec.de */
2206 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2207 .video_inputs = 4,
2208 .audio_inputs = 0,
2209 .tuner = -1, /* card has no tuner */
2210 .svhs = 3,
2211 .gpiomask = 0x00,
2212 .muxsel = { 2, 3, 1, 0 },
2213 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2214 .needs_tvaudio = 1,
2215 .pll = PLL_28,
2216 .tuner_type = -1,
2217 .tuner_addr = ADDR_UNSET,
2218 .radio_addr = ADDR_UNSET,
2219 },
2220 [BTTV_BOARD_VD009X1_COMBI] = {
2221 .name = "PHYTEC VD-009-X1 Combi (bt878)",
2222 .video_inputs = 4,
2223 .audio_inputs = 0,
2224 .tuner = -1, /* card has no tuner */
2225 .svhs = 3,
2226 .gpiomask = 0x00,
2227 .muxsel = { 2, 3, 1, 1 },
2228 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2229 .needs_tvaudio = 1,
2230 .pll = PLL_28,
2231 .tuner_type = -1,
2232 .tuner_addr = ADDR_UNSET,
2233 .radio_addr = ADDR_UNSET,
2234 },
2235
2236 /* ---- card 0x6c ---------------------------------- */
2237 [BTTV_BOARD_VD009_MINIDIN] = {
2238 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2239 .video_inputs = 10,
2240 .audio_inputs = 0,
2241 .tuner = -1, /* card has no tuner */
2242 .svhs = 9,
2243 .gpiomask = 0x00,
2244 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2245 via the upper nibble of muxsel. here: used for
2246 xternal video-mux */
2247 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2248 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2249 .needs_tvaudio = 1,
2250 .pll = PLL_28,
2251 .tuner_type = -1,
2252 .tuner_addr = ADDR_UNSET,
2253 .radio_addr = ADDR_UNSET,
2254 },
2255 [BTTV_BOARD_VD009_COMBI] = {
2256 .name = "PHYTEC VD-009 Combi (bt878)",
2257 .video_inputs = 10,
2258 .audio_inputs = 0,
2259 .tuner = -1, /* card has no tuner */
2260 .svhs = 9,
2261 .gpiomask = 0x00,
2262 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2263 via the upper nibble of muxsel. here: used for
2264 xternal video-mux */
2265 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2266 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2267 .needs_tvaudio = 1,
2268 .pll = PLL_28,
2269 .tuner_type = -1,
2270 .tuner_addr = ADDR_UNSET,
2271 .radio_addr = ADDR_UNSET,
2272 },
2273 [BTTV_BOARD_IVC100] = {
2274 .name = "IVC-100",
2275 .video_inputs = 4,
2276 .audio_inputs = 0,
2277 .tuner = -1,
2278 .tuner_type = -1,
2279 .tuner_addr = ADDR_UNSET,
2280 .radio_addr = ADDR_UNSET,
2281 .svhs = -1,
2282 .gpiomask = 0xdf,
2283 .muxsel = { 2, 3, 1, 0 },
2284 .pll = PLL_28,
2285 },
2286 [BTTV_BOARD_IVC120] = {
2287 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2288 .name = "IVC-120G",
2289 .video_inputs = 16,
2290 .audio_inputs = 0, /* card has no audio */
2291 .tuner = -1, /* card has no tuner */
2292 .tuner_type = -1,
2293 .tuner_addr = ADDR_UNSET,
2294 .radio_addr = ADDR_UNSET,
2295 .svhs = -1, /* card has no svhs */
2296 .needs_tvaudio = 0,
2297 .no_msp34xx = 1,
2298 .no_tda9875 = 1,
2299 .no_tda7432 = 1,
2300 .gpiomask = 0x00,
2301 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2302 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2303 .muxsel_hook = ivc120_muxsel,
2304 .pll = PLL_28,
2305 },
2306
2307 /* ---- card 0x70 ---------------------------------- */
2308 [BTTV_BOARD_PC_HDTV] = {
2309 .name = "pcHDTV HD-2000 TV",
2310 .video_inputs = 4,
2311 .audio_inputs = 1,
2312 .tuner = 0,
2313 .svhs = 2,
2314 .muxsel = { 2, 3, 1, 0 },
2315 .tuner_type = TUNER_PHILIPS_ATSC,
2316 .tuner_addr = ADDR_UNSET,
2317 .radio_addr = ADDR_UNSET,
2318 .has_dvb = 1,
2319 },
2320 [BTTV_BOARD_TWINHAN_DST] = {
2321 .name = "Twinhan DST + clones",
2322 .no_msp34xx = 1,
2323 .no_tda9875 = 1,
2324 .no_tda7432 = 1,
2325 .tuner_type = TUNER_ABSENT,
2326 .tuner_addr = ADDR_UNSET,
2327 .radio_addr = ADDR_UNSET,
2328 .no_video = 1,
2329 .has_dvb = 1,
2330 },
2331 [BTTV_BOARD_WINFASTVC100] = {
2332 .name = "Winfast VC100",
2333 .video_inputs = 3,
2334 .audio_inputs = 0,
2335 .svhs = 1,
2336 .tuner = -1,
2337 .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2338 .no_msp34xx = 1,
2339 .no_tda9875 = 1,
2340 .no_tda7432 = 1,
2341 .tuner_type = TUNER_ABSENT,
2342 .tuner_addr = ADDR_UNSET,
2343 .radio_addr = ADDR_UNSET,
2344 .pll = PLL_28,
2345 },
2346 [BTTV_BOARD_TEV560] = {
2347 .name = "Teppro TEV-560/InterVision IV-560",
2348 .video_inputs = 3,
2349 .audio_inputs = 1,
2350 .tuner = 0,
2351 .svhs = 2,
2352 .gpiomask = 3,
2353 .muxsel = { 2, 3, 1, 1 },
2354 .gpiomux = { 1, 1, 1, 1 },
2355 .needs_tvaudio = 1,
2356 .tuner_type = TUNER_PHILIPS_PAL,
2357 .tuner_addr = ADDR_UNSET,
2358 .radio_addr = ADDR_UNSET,
2359 .pll = PLL_35,
2360 },
2361
2362 /* ---- card 0x74 ---------------------------------- */
2363 [BTTV_BOARD_SIMUS_GVC1100] = {
2364 .name = "SIMUS GVC1100",
2365 .video_inputs = 4,
2366 .audio_inputs = 0,
2367 .tuner = -1,
2368 .svhs = -1,
2369 .tuner_type = -1,
2370 .tuner_addr = ADDR_UNSET,
2371 .radio_addr = ADDR_UNSET,
2372 .pll = PLL_28,
2373 .muxsel = { 2, 2, 2, 2 },
2374 .gpiomask = 0x3F,
2375 .muxsel_hook = gvc1100_muxsel,
2376 },
2377 [BTTV_BOARD_NGSTV_PLUS] = {
2378 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2379 .name = "NGS NGSTV+",
2380 .video_inputs = 3,
2381 .tuner = 0,
2382 .svhs = 2,
2383 .gpiomask = 0x008007,
2384 .muxsel = { 2, 3, 0, 0 },
2385 .gpiomux = { 0, 0, 0, 0 },
2386 .gpiomute = 0x000003,
2387 .pll = PLL_28,
2388 .tuner_type = TUNER_PHILIPS_PAL,
2389 .tuner_addr = ADDR_UNSET,
2390 .radio_addr = ADDR_UNSET,
2391 .has_remote = 1,
2392 },
2393 [BTTV_BOARD_LMLBT4] = {
2394 /* http://linuxmedialabs.com */
2395 .name = "LMLBT4",
2396 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2397 .audio_inputs = 0,
2398 .tuner = -1,
2399 .svhs = -1,
2400 .muxsel = { 2, 3, 1, 0 },
2401 .no_msp34xx = 1,
2402 .no_tda9875 = 1,
2403 .no_tda7432 = 1,
2404 .needs_tvaudio = 0,
2405 .tuner_type = -1,
2406 .tuner_addr = ADDR_UNSET,
2407 .radio_addr = ADDR_UNSET,
2408 },
2409 [BTTV_BOARD_TEKRAM_M205] = {
2410 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2411 .name = "Tekram M205 PRO",
2412 .video_inputs = 3,
2413 .audio_inputs = 1,
2414 .tuner = 0,
2415 .tuner_type = TUNER_PHILIPS_PAL,
2416 .tuner_addr = ADDR_UNSET,
2417 .radio_addr = ADDR_UNSET,
2418 .svhs = 2,
2419 .needs_tvaudio = 0,
2420 .gpiomask = 0x68,
2421 .muxsel = { 2, 3, 1 },
2422 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2423 .pll = PLL_28,
2424 },
2425
2426 /* ---- card 0x78 ---------------------------------- */
2427 [BTTV_BOARD_CONTVFMI] = {
2428 /* Javier Cendan Ares <jcendan@lycos.es> */
2429 /* bt878 TV + FM without subsystem ID */
2430 .name = "Conceptronic CONTVFMi",
2431 .video_inputs = 3,
2432 .audio_inputs = 1,
2433 .tuner = 0,
2434 .svhs = 2,
2435 .gpiomask = 0x008007,
2436 .muxsel = { 2, 3, 1, 1 },
2437 .gpiomux = { 0, 1, 2, 2 },
2438 .gpiomute = 3,
2439 .needs_tvaudio = 0,
2440 .pll = PLL_28,
2441 .tuner_type = TUNER_PHILIPS_PAL,
2442 .tuner_addr = ADDR_UNSET,
2443 .radio_addr = ADDR_UNSET,
2444 .has_remote = 1,
2445 .has_radio = 1,
2446 },
2447 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2448 /*Eric DEBIEF <debief@telemsa.com>*/
2449 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2450 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2451 /*0x79 in bttv.h*/
2452 .name = "Euresys Picolo Tetra",
2453 .video_inputs = 4,
2454 .audio_inputs = 0,
2455 .tuner = -1,
2456 .svhs = -1,
2457 .gpiomask = 0,
2458 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2459 .no_msp34xx = 1,
2460 .no_tda9875 = 1,
2461 .no_tda7432 = 1,
2462 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2463 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2464 .pll = PLL_28,
2465 .needs_tvaudio = 0,
2466 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2467 .tuner_type = -1,
2468 .tuner_addr = ADDR_UNSET,
2469 .radio_addr = ADDR_UNSET,
2470 },
2471 [BTTV_BOARD_SPIRIT_TV] = {
2472 /* Spirit TV Tuner from http://spiritmodems.com.au */
2473 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2474 .name = "Spirit TV Tuner",
2475 .video_inputs = 3,
2476 .audio_inputs = 1,
2477 .tuner = 0,
2478 .svhs = 2,
2479 .gpiomask = 0x0000000f,
2480 .muxsel = { 2, 1, 1 },
2481 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2482 .tuner_type = TUNER_TEMIC_PAL,
2483 .tuner_addr = ADDR_UNSET,
2484 .radio_addr = ADDR_UNSET,
2485 .no_msp34xx = 1,
2486 .no_tda9875 = 1,
2487 },
2488 [BTTV_BOARD_AVDVBT_771] = {
2489 /* Wolfram Joost <wojo@frokaschwei.de> */
2490 .name = "AVerMedia AVerTV DVB-T 771",
2491 .video_inputs = 2,
2492 .svhs = 1,
2493 .tuner = -1,
2494 .tuner_type = TUNER_ABSENT,
2495 .tuner_addr = ADDR_UNSET,
2496 .radio_addr = ADDR_UNSET,
2497 .muxsel = { 3 , 3 },
2498 .no_msp34xx = 1,
2499 .no_tda9875 = 1,
2500 .no_tda7432 = 1,
2501 .pll = PLL_28,
2502 .has_dvb = 1,
2503 .no_gpioirq = 1,
2504 .has_remote = 1,
2505 },
2506 /* ---- card 0x7c ---------------------------------- */
2507 [BTTV_BOARD_AVDVBT_761] = {
2508 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2509 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2510 .name = "AverMedia AverTV DVB-T 761",
2511 .video_inputs = 2,
2512 .tuner = -1,
2513 .svhs = 1,
2514 .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2515 .no_msp34xx = 1,
2516 .no_tda9875 = 1,
2517 .no_tda7432 = 1,
2518 .pll = PLL_28,
2519 .tuner_type = -1,
2520 .tuner_addr = ADDR_UNSET,
2521 .radio_addr = ADDR_UNSET,
2522 .has_dvb = 1,
2523 .no_gpioirq = 1,
2524 .has_remote = 1,
2525 },
2526 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2527 /* andre.schwarz@matrix-vision.de */
2528 .name = "MATRIX Vision Sigma-SQ",
2529 .video_inputs = 16,
2530 .audio_inputs = 0,
2531 .tuner = -1,
2532 .svhs = -1,
2533 .gpiomask = 0x0,
2534 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2535 3, 3, 3, 3, 3, 3, 3, 3 },
2536 .muxsel_hook = sigmaSQ_muxsel,
2537 .gpiomux = { 0 },
2538 .no_msp34xx = 1,
2539 .pll = PLL_28,
2540 .tuner_type = -1,
2541 .tuner_addr = ADDR_UNSET,
2542 .radio_addr = ADDR_UNSET,
2543 },
2544 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2545 /* andre.schwarz@matrix-vision.de */
2546 .name = "MATRIX Vision Sigma-SLC",
2547 .video_inputs = 4,
2548 .audio_inputs = 0,
2549 .tuner = -1,
2550 .svhs = -1,
2551 .gpiomask = 0x0,
2552 .muxsel = { 2, 2, 2, 2 },
2553 .muxsel_hook = sigmaSLC_muxsel,
2554 .gpiomux = { 0 },
2555 .no_msp34xx = 1,
2556 .pll = PLL_28,
2557 .tuner_type = -1,
2558 .tuner_addr = ADDR_UNSET,
2559 .radio_addr = ADDR_UNSET,
2560 },
2561 /* BTTV_BOARD_APAC_VIEWCOMP */
2562 [BTTV_BOARD_APAC_VIEWCOMP] = {
2563 /* Attila Kondoros <attila.kondoros@chello.hu> */
2564 /* bt878 TV + FM 0x00000000 subsystem ID */
2565 .name = "APAC Viewcomp 878(AMAX)",
2566 .video_inputs = 2,
2567 .audio_inputs = 1,
2568 .tuner = 0,
2569 .svhs = -1,
2570 .gpiomask = 0xFF,
2571 .muxsel = { 2, 3, 1, 1 },
2572 .gpiomux = { 2, 0, 0, 0 },
2573 .gpiomute = 10,
2574 .needs_tvaudio = 0,
2575 .pll = PLL_28,
2576 .tuner_type = TUNER_PHILIPS_PAL,
2577 .tuner_addr = ADDR_UNSET,
2578 .radio_addr = ADDR_UNSET,
2579 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2580 .has_radio = 1, /* not every card has radio */
2581 },
2582
2583 /* ---- card 0x80 ---------------------------------- */
2584 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2585 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2586 .name = "DViCO FusionHDTV DVB-T Lite",
2587 .tuner = -1,
2588 .no_msp34xx = 1,
2589 .no_tda9875 = 1,
2590 .no_tda7432 = 1,
2591 .pll = PLL_28,
2592 .no_video = 1,
2593 .has_dvb = 1,
2594 .tuner_type = -1,
2595 .tuner_addr = ADDR_UNSET,
2596 .radio_addr = ADDR_UNSET,
2597 },
2598 [BTTV_BOARD_VGEAR_MYVCD] = {
2599 /* Steven <photon38@pchome.com.tw> */
2600 .name = "V-Gear MyVCD",
2601 .video_inputs = 3,
2602 .audio_inputs = 1,
2603 .tuner = 0,
2604 .svhs = 2,
2605 .gpiomask = 0x3f,
2606 .muxsel = {2, 3, 1, 0 },
2607 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2608 .gpiomute = 0x31,
2609 .no_msp34xx = 1,
2610 .pll = PLL_28,
2611 .tuner_type = TUNER_PHILIPS_NTSC_M,
2612 .tuner_addr = ADDR_UNSET,
2613 .radio_addr = ADDR_UNSET,
2614 .has_radio = 0,
2615 },
2616 [BTTV_BOARD_SUPER_TV] = {
2617 /* Rick C <cryptdragoon@gmail.com> */
2618 .name = "Super TV Tuner",
2619 .video_inputs = 4,
2620 .audio_inputs = 1,
2621 .tuner = 0,
2622 .svhs = 2,
2623 .muxsel = { 2, 3, 1, 0 },
2624 .tuner_type = TUNER_PHILIPS_NTSC,
2625 .tuner_addr = ADDR_UNSET,
2626 .radio_addr = ADDR_UNSET,
2627 .gpiomask = 0x008007,
2628 .gpiomux = { 0, 0x000001,0,0 },
2629 .needs_tvaudio = 1,
2630 .has_radio = 1,
2631 },
2632 [BTTV_BOARD_TIBET_CS16] = {
2633 /* Chris Fanning <video4linux@haydon.net> */
2634 .name = "Tibet Systems 'Progress DVR' CS16",
2635 .video_inputs = 16,
2636 .audio_inputs = 0,
2637 .tuner = -1,
2638 .svhs = -1,
2639 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2640 .pll = PLL_28,
2641 .no_msp34xx = 1,
2642 .no_tda9875 = 1,
2643 .no_tda7432 = 1,
2644 .tuner_type = -1,
2645 .tuner_addr = ADDR_UNSET,
2646 .radio_addr = ADDR_UNSET,
2647 .muxsel_hook = tibetCS16_muxsel,
2648 },
2649 [BTTV_BOARD_KODICOM_4400R] = {
2650 /* Bill Brack <wbrack@mmm.com.hk> */
2651 /*
2652 * Note that, because of the card's wiring, the "master"
2653 * BT878A chip (i.e. the one which controls the analog switch
2654 * and must use this card type) is the 2nd one detected. The
2655 * other 3 chips should use card type 0x85, whose description
2656 * follows this one. There is a EEPROM on the card (which is
2657 * connected to the I2C of one of those other chips), but is
2658 * not currently handled. There is also a facility for a
2659 * "monitor", which is also not currently implemented.
2660 */
2661 .name = "Kodicom 4400R (master)",
2662 .video_inputs = 16,
2663 .audio_inputs = 0,
2664 .tuner = -1,
2665 .tuner_type = -1,
2666 .tuner_addr = ADDR_UNSET,
2667 .radio_addr = ADDR_UNSET,
2668 .svhs = -1,
2669 /* GPIO bits 0-9 used for analog switch:
2670 * 00 - 03: camera selector
2671 * 04 - 06: channel (controller) selector
2672 * 07: data (1->on, 0->off)
2673 * 08: strobe
2674 * 09: reset
2675 * bit 16 is input from sync separator for the channel
2676 */
2677 .gpiomask = 0x0003ff,
2678 .no_gpioirq = 1,
2679 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2680 .pll = PLL_28,
2681 .no_msp34xx = 1,
2682 .no_tda7432 = 1,
2683 .no_tda9875 = 1,
2684 .muxsel_hook = kodicom4400r_muxsel,
2685 },
2686 [BTTV_BOARD_KODICOM_4400R_SL] = {
2687 /* Bill Brack <wbrack@mmm.com.hk> */
2688 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2689 * one which controls the analog switch, and must use the card type)
2690 * is the 2nd one detected. The other 3 chips should use this card
2691 * type
2692 */
2693 .name = "Kodicom 4400R (slave)",
2694 .video_inputs = 16,
2695 .audio_inputs = 0,
2696 .tuner = -1,
2697 .tuner_type = -1,
2698 .tuner_addr = ADDR_UNSET,
2699 .radio_addr = ADDR_UNSET,
2700 .svhs = -1,
2701 .gpiomask = 0x010000,
2702 .no_gpioirq = 1,
2703 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2704 .pll = PLL_28,
2705 .no_msp34xx = 1,
2706 .no_tda7432 = 1,
2707 .no_tda9875 = 1,
2708 .muxsel_hook = kodicom4400r_muxsel,
2709 },
2710 /* ---- card 0x86---------------------------------- */
2711 [BTTV_BOARD_ADLINK_RTV24] = {
2712 /* Michael Henson <mhenson@clarityvi.com> */
2713 /* Adlink RTV24 with special unlock codes */
2714 .name = "Adlink RTV24",
2715 .video_inputs = 4,
2716 .audio_inputs = 1,
2717 .tuner = 0,
2718 .svhs = 2,
2719 .muxsel = { 2, 3, 1, 0 },
2720 .tuner_type = -1,
2721 .tuner_addr = ADDR_UNSET,
2722 .radio_addr = ADDR_UNSET,
2723 .pll = PLL_28,
2724 },
2725 /* ---- card 0x87---------------------------------- */
2726 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2727 /* Michael Krufky <mkrufky@m1k.net> */
2728 .name = "DViCO FusionHDTV 5 Lite",
2729 .tuner = 0,
2730 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2731 .tuner_addr = ADDR_UNSET,
2732 .radio_addr = ADDR_UNSET,
2733 .video_inputs = 3,
2734 .audio_inputs = 1,
2735 .svhs = 2,
2736 .muxsel = { 2, 3, 1 },
2737 .gpiomask = 0x00e00007,
2738 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2739 .gpiomute = 0x00c00007,
2740 .no_msp34xx = 1,
2741 .no_tda9875 = 1,
2742 .no_tda7432 = 1,
2743 .has_dvb = 1,
2744 },
2745 /* ---- card 0x88---------------------------------- */
2746 [BTTV_BOARD_ACORP_Y878F] = {
2747 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2748 .name = "Acorp Y878F",
2749 .video_inputs = 3,
2750 .audio_inputs = 1,
2751 .tuner = 0,
2752 .svhs = 2,
2753 .gpiomask = 0x01fe00,
2754 .muxsel = { 2, 3, 1, 1 },
2755 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2756 .gpiomute = 0x002000,
2757 .needs_tvaudio = 1,
2758 .pll = PLL_28,
2759 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2760 .tuner_addr = 0xc1 >>1,
2761 .radio_addr = 0xc1 >>1,
2762 .has_radio = 1,
2763 },
2764 /* ---- card 0x89 ---------------------------------- */
2765 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2766 .name = "Conceptronic CTVFMi v2",
2767 .video_inputs = 3,
2768 .audio_inputs = 1,
2769 .tuner = 0,
2770 .svhs = 2,
2771 .gpiomask = 0x001c0007,
2772 .muxsel = { 2, 3, 1, 1 },
2773 .gpiomux = { 0, 1, 2, 2 },
2774 .gpiomute = 3,
2775 .needs_tvaudio = 0,
2776 .pll = PLL_28,
2777 .tuner_type = TUNER_TENA_9533_DI,
2778 .tuner_addr = ADDR_UNSET,
2779 .radio_addr = ADDR_UNSET,
2780 .has_remote = 1,
2781 .has_radio = 1,
2782 },
2783 /* ---- card 0x8a ---------------------------------- */
2784 [BTTV_BOARD_PV_BT878P_2E] = {
2785 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2786 .video_inputs = 5,
2787 .audio_inputs = 1,
2788 .tuner = 0,
2789 .svhs = 3,
2790 .gpiomask = 0x01fe00,
2791 .muxsel = { 2,3,1,1,-1 },
2792 .digital_mode = DIGITAL_MODE_CAMERA,
2793 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2794 .gpiomute = 0x12400,
2795 .no_msp34xx = 1,
2796 .pll = PLL_28,
2797 .tuner_type = TUNER_LG_PAL_FM,
2798 .tuner_addr = ADDR_UNSET,
2799 .radio_addr = ADDR_UNSET,
2800 .has_remote = 1,
2801 },
2802 /* ---- card 0x8b ---------------------------------- */
2803 [BTTV_BOARD_PV_M4900] = {
2804 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2805 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2806 .video_inputs = 3,
2807 .audio_inputs = 1,
2808 .tuner = 0,
2809 .svhs = 2,
2810 .gpiomask = 0x3f,
2811 .muxsel = { 2, 3, 1, 1 },
2812 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2813 .gpiomute = 0x29,
2814 .no_msp34xx = 1,
2815 .pll = PLL_28,
2816 .tuner_type = TUNER_YMEC_TVF_5533MF,
2817 .tuner_addr = ADDR_UNSET,
2818 .radio_addr = ADDR_UNSET,
2819 .has_radio = 1,
2820 .has_remote = 1,
2821 },
2822 /* ---- card 0x8c ---------------------------------- */
2823 [BTTV_BOARD_OSPREY440] = {
2824 .name = "Osprey 440",
2825 .video_inputs = 1,
2826 .audio_inputs = 1,
2827 .tuner = -1,
2828 .svhs = 1,
2829 .muxsel = { 2 },
2830 .pll = PLL_28,
2831 .tuner_type = UNSET,
2832 .tuner_addr = ADDR_UNSET,
2833 .radio_addr = ADDR_UNSET,
2834 .no_msp34xx = 1,
2835 .no_tda9875 = 1,
2836 .no_tda7432 = 1,
2837 },
2838 /* ---- card 0x8d ---------------------------------- */
2839 [BTTV_BOARD_ASOUND_SKYEYE] = {
2840 .name = "Asound Skyeye PCTV",
2841 .video_inputs = 3,
2842 .audio_inputs = 1,
2843 .tuner = 0,
2844 .svhs = 2,
2845 .gpiomask = 15,
2846 .muxsel = { 2, 3, 1, 1 },
2847 .gpiomux = { 2, 0, 0, 0 },
2848 .gpiomute = 1,
2849 .needs_tvaudio = 1,
2850 .pll = PLL_28,
2851 .tuner_type = 2,
2852 .tuner_addr = ADDR_UNSET,
2853 .radio_addr = ADDR_UNSET,
2854 },
2855 /* ---- card 0x8e ---------------------------------- */
2856 [BTTV_BOARD_SABRENT_TVFM] = {
2857 .name = "Sabrent TV-FM (bttv version)",
2858 .video_inputs = 3,
2859 .audio_inputs = 1,
2860 .tuner = 0,
2861 .svhs = 2,
2862 .gpiomask = 0x108007,
2863 .muxsel = { 2, 3, 1, 1 },
2864 .gpiomux = { 100000, 100002, 100002, 100000 },
2865 .no_msp34xx = 1,
2866 .no_tda9875 = 1,
2867 .no_tda7432 = 1,
2868 .pll = PLL_28,
2869 .tuner_type = TUNER_TNF_5335MF,
2870 .tuner_addr = ADDR_UNSET,
2871 .has_radio = 1,
2872 },
2873 /* ---- card 0x8f ---------------------------------- */
2874 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2875 .name = "Hauppauge ImpactVCB (bt878)",
2876 .video_inputs = 4,
2877 .audio_inputs = 0,
2878 .tuner = -1,
2879 .svhs = -1,
2880 .gpiomask = 0x0f, /* old: 7 */
2881 .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */
2882 .no_msp34xx = 1,
2883 .no_tda9875 = 1,
2884 .no_tda7432 = 1,
2885 .tuner_type = -1,
2886 .tuner_addr = ADDR_UNSET,
2887 .radio_addr = ADDR_UNSET,
2888 },
2889 [BTTV_BOARD_MACHTV_MAGICTV] = {
2890 /* Julian Calaby <julian.calaby@gmail.com>
2891 * Slightly different from original MachTV definition (0x60)
2892
2893 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2894 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2895 * properly (methinks) causing no keyup bits being set */
2896
2897 .name = "MagicTV", /* rebranded MachTV */
2898 .video_inputs = 3,
2899 .audio_inputs = 1,
2900 .tuner = 0,
2901 .svhs = 2,
2902 .gpiomask = 7,
2903 .muxsel = { 2, 3, 1, 1 },
2904 .gpiomux = { 0, 1, 2, 3 },
2905 .gpiomute = 4,
2906 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2907 .tuner_addr = ADDR_UNSET,
2908 .radio_addr = ADDR_UNSET,
2909 .pll = PLL_28,
2910 .has_radio = 1,
2911 .has_remote = 1,
2912 },
2913 [BTTV_BOARD_SSAI_SECURITY] = {
2914 .name = "SSAI Security Video Interface",
2915 .video_inputs = 4,
2916 .audio_inputs = 0,
2917 .tuner = -1,
2918 .svhs = -1,
2919 .muxsel = { 0, 1, 2, 3 },
2920 .tuner_type = -1,
2921 .tuner_addr = ADDR_UNSET,
2922 .radio_addr = ADDR_UNSET,
2923 },
2924 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2925 .name = "SSAI Ultrasound Video Interface",
2926 .video_inputs = 2,
2927 .audio_inputs = 0,
2928 .tuner = -1,
2929 .svhs = 1,
2930 .muxsel = { 2, 0, 1, 3 },
2931 .tuner_type = -1,
2932 .tuner_addr = ADDR_UNSET,
2933 .radio_addr = ADDR_UNSET,
2934 },
2935 };
2936
2937 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2938
2939 /* ----------------------------------------------------------------------- */
2940
2941 static unsigned char eeprom_data[256];
2942
2943 /*
2944 * identify card
2945 */
2946 void __devinit bttv_idcard(struct bttv *btv)
2947 {
2948 unsigned int gpiobits;
2949 int i,type;
2950 unsigned short tmp;
2951
2952 /* read PCI subsystem ID */
2953 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2954 btv->cardid = tmp << 16;
2955 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2956 btv->cardid |= tmp;
2957
2958 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2959 /* look for the card */
2960 for (type = -1, i = 0; cards[i].id != 0; i++)
2961 if (cards[i].id == btv->cardid)
2962 type = i;
2963
2964 if (type != -1) {
2965 /* found it */
2966 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2967 "PCI subsystem ID is %04x:%04x\n",
2968 btv->c.nr,cards[type].name,cards[type].cardnr,
2969 btv->cardid & 0xffff,
2970 (btv->cardid >> 16) & 0xffff);
2971 btv->c.type = cards[type].cardnr;
2972 } else {
2973 /* 404 */
2974 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2975 btv->c.nr, btv->cardid & 0xffff,
2976 (btv->cardid >> 16) & 0xffff);
2977 printk(KERN_DEBUG "please mail id, board name and "
2978 "the correct card= insmod option to video4linux-list@redhat.com\n");
2979 }
2980 }
2981
2982 /* let the user override the autodetected type */
2983 if (card[btv->c.nr] < bttv_num_tvcards)
2984 btv->c.type=card[btv->c.nr];
2985
2986 /* print which card config we are using */
2987 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2988 bttv_tvcards[btv->c.type].name, btv->c.type,
2989 card[btv->c.nr] < bttv_num_tvcards
2990 ? "insmod option" : "autodetected");
2991
2992 /* overwrite gpio stuff ?? */
2993 if (UNSET == audioall && UNSET == audiomux[0])
2994 return;
2995
2996 if (UNSET != audiomux[0]) {
2997 gpiobits = 0;
2998 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2999 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
3000 gpiobits |= audiomux[i];
3001 }
3002 } else {
3003 gpiobits = audioall;
3004 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3005 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3006 }
3007 }
3008 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3009 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3010 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3011 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3012 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3013 }
3014 printk("\n");
3015 }
3016
3017 /*
3018 * (most) board specific initialisations goes here
3019 */
3020
3021 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3022 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3023 {
3024 int type = -1;
3025
3026 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3027 type = BTTV_BOARD_MODTEC_205;
3028 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3029 type = BTTV_BOARD_EURESYS_PICOLO;
3030 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3031 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3032
3033 if (-1 != type) {
3034 btv->c.type = type;
3035 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3036 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3037 }
3038 }
3039
3040 static void flyvideo_gpio(struct bttv *btv)
3041 {
3042 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3043 int tuner=-1,ttype;
3044
3045 gpio_inout(0xffffff, 0);
3046 udelay(8); /* without this we would see the 0x1800 mask */
3047 gpio = gpio_read();
3048 /* FIXME: must restore OUR_EN ??? */
3049
3050 /* all cards provide GPIO info, some have an additional eeprom
3051 * LR50: GPIO coding can be found lower right CP1 .. CP9
3052 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3053 * GPIO14-12: n.c.
3054 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3055
3056 * lowest 3 bytes are remote control codes (no handshake needed)
3057 * xxxFFF: No remote control chip soldered
3058 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3059 * Note: Some bits are Audio_Mask !
3060 */
3061 ttype=(gpio&0x0f0000)>>16;
3062 switch(ttype) {
3063 case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3064 break;
3065 case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3066 break;
3067 case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3068 break;
3069 case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3070 break;
3071 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3072 break;
3073 default:
3074 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3075 }
3076
3077 has_remote = gpio & 0x800000;
3078 has_radio = gpio & 0x400000;
3079 /* unknown 0x200000;
3080 * unknown2 0x100000; */
3081 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3082 has_tda9820_tda9821 = !(gpio & 0x004000);
3083 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3084 /*
3085 * gpio & 0x001000 output bit for audio routing */
3086
3087 if(is_capture_only)
3088 tuner=4; /* No tuner present */
3089
3090 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3091 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3092 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3093 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3094 is_capture_only?"yes":"no ");
3095
3096 if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3097 btv->tuner_type = tuner;
3098 btv->has_radio = has_radio;
3099
3100 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3101 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3102 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3103 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3104 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3105 }
3106
3107 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3108 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3109 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3110 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3111
3112 static void miro_pinnacle_gpio(struct bttv *btv)
3113 {
3114 int id,msp,gpio;
3115 char *info;
3116
3117 gpio_inout(0xffffff, 0);
3118 gpio = gpio_read();
3119 id = ((gpio>>10) & 63) -1;
3120 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3121 if (id < 32) {
3122 btv->tuner_type = miro_tunermap[id];
3123 if (0 == (gpio & 0x20)) {
3124 btv->has_radio = 1;
3125 if (!miro_fmtuner[id]) {
3126 btv->has_matchbox = 1;
3127 btv->mbox_we = (1<<6);
3128 btv->mbox_most = (1<<7);
3129 btv->mbox_clk = (1<<8);
3130 btv->mbox_data = (1<<9);
3131 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3132 }
3133 } else {
3134 btv->has_radio = 0;
3135 }
3136 if (-1 != msp) {
3137 if (btv->c.type == BTTV_BOARD_MIRO)
3138 btv->c.type = BTTV_BOARD_MIROPRO;
3139 if (btv->c.type == BTTV_BOARD_PINNACLE)
3140 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3141 }
3142 printk(KERN_INFO
3143 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3144 btv->c.nr, id+1, btv->tuner_type,
3145 !btv->has_radio ? "no" :
3146 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3147 (-1 == msp) ? "no" : "yes");
3148 } else {
3149 /* new cards with microtune tuner */
3150 id = 63 - id;
3151 btv->has_radio = 0;
3152 switch (id) {
3153 case 1:
3154 info = "PAL / mono";
3155 btv->tda9887_conf = TDA9887_INTERCARRIER;
3156 break;
3157 case 2:
3158 info = "PAL+SECAM / stereo";
3159 btv->has_radio = 1;
3160 btv->tda9887_conf = TDA9887_QSS;
3161 break;
3162 case 3:
3163 info = "NTSC / stereo";
3164 btv->has_radio = 1;
3165 btv->tda9887_conf = TDA9887_QSS;
3166 break;
3167 case 4:
3168 info = "PAL+SECAM / mono";
3169 btv->tda9887_conf = TDA9887_QSS;
3170 break;
3171 case 5:
3172 info = "NTSC / mono";
3173 btv->tda9887_conf = TDA9887_INTERCARRIER;
3174 break;
3175 case 6:
3176 info = "NTSC / stereo";
3177 btv->tda9887_conf = TDA9887_INTERCARRIER;
3178 break;
3179 case 7:
3180 info = "PAL / stereo";
3181 btv->tda9887_conf = TDA9887_INTERCARRIER;
3182 break;
3183 default:
3184 info = "oops: unknown card";
3185 break;
3186 }
3187 if (-1 != msp)
3188 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3189 printk(KERN_INFO
3190 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3191 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3192 btv->tuner_type = TUNER_MT2032;
3193 }
3194 }
3195
3196 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3197 #define LM1882_SYNC_DRIVE 0x200000L
3198
3199 static void init_ids_eagle(struct bttv *btv)
3200 {
3201 gpio_inout(0xffffff,0xFFFF37);
3202 gpio_write(0x200020);
3203
3204 /* flash strobe inverter ?! */
3205 gpio_write(0x200024);
3206
3207 /* switch sync drive off */
3208 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3209
3210 /* set BT848 muxel to 2 */
3211 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3212 }
3213
3214 /* Muxsel helper for the IDS Eagle.
3215 * the eagles does not use the standard muxsel-bits but
3216 * has its own multiplexer */
3217 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3218 {
3219 btaor((2)<<5, ~(3<<5), BT848_IFORM);
3220 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3221
3222 /* composite */
3223 /* set chroma ADC to sleep */
3224 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3225 /* set to composite video */
3226 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3227 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3228
3229 /* switch sync drive off */
3230 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3231 }
3232
3233 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3234 {
3235 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3236 gpio_write(masks[input%4]);
3237 }
3238
3239 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3240 alarms output
3241
3242 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3243 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3244
3245 IN - sensor inputs, INx - sensor inputs and TI XORed together
3246 O1,O2,O3 - alarm outputs (relays)
3247
3248 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3249
3250 */
3251
3252 static void init_lmlbt4x(struct bttv *btv)
3253 {
3254 printk(KERN_DEBUG "LMLBT4x init\n");
3255 btwrite(0x000000, BT848_GPIO_REG_INP);
3256 gpio_inout(0xffffff, 0x0006C0);
3257 gpio_write(0x000000);
3258 }
3259
3260 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3261 {
3262 unsigned int inmux = input % 8;
3263 gpio_inout( 0xf, 0xf );
3264 gpio_bits( 0xf, inmux );
3265 }
3266
3267 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3268 {
3269 unsigned int inmux = input % 4;
3270 gpio_inout( 3<<9, 3<<9 );
3271 gpio_bits( 3<<9, inmux<<9 );
3272 }
3273
3274 /* ----------------------------------------------------------------------- */
3275
3276 static void bttv_reset_audio(struct bttv *btv)
3277 {
3278 /*
3279 * BT878A has a audio-reset register.
3280 * 1. This register is an audio reset function but it is in
3281 * function-0 (video capture) address space.
3282 * 2. It is enough to do this once per power-up of the card.
3283 * 3. There is a typo in the Conexant doc -- it is not at
3284 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3285 * --//Shrikumar 030609
3286 */
3287 if (btv->id != 878)
3288 return;
3289
3290 if (bttv_debug)
3291 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3292 btwrite((1<<7), 0x058);
3293 udelay(10);
3294 btwrite( 0, 0x058);
3295 }
3296
3297 /* initialization part one -- before registering i2c bus */
3298 void __devinit bttv_init_card1(struct bttv *btv)
3299 {
3300 switch (btv->c.type) {
3301 case BTTV_BOARD_HAUPPAUGE:
3302 case BTTV_BOARD_HAUPPAUGE878:
3303 boot_msp34xx(btv,5);
3304 break;
3305 case BTTV_BOARD_VOODOOTV_FM:
3306 boot_msp34xx(btv,20);
3307 break;
3308 case BTTV_BOARD_AVERMEDIA98:
3309 boot_msp34xx(btv,11);
3310 break;
3311 case BTTV_BOARD_HAUPPAUGEPVR:
3312 pvr_boot(btv);
3313 break;
3314 case BTTV_BOARD_TWINHAN_DST:
3315 case BTTV_BOARD_AVDVBT_771:
3316 case BTTV_BOARD_PINNACLESAT:
3317 btv->use_i2c_hw = 1;
3318 break;
3319 case BTTV_BOARD_ADLINK_RTV24:
3320 init_RTV24( btv );
3321 break;
3322
3323 }
3324 if (!bttv_tvcards[btv->c.type].has_dvb)
3325 bttv_reset_audio(btv);
3326 }
3327
3328 /* initialization part two -- after registering i2c bus */
3329 void __devinit bttv_init_card2(struct bttv *btv)
3330 {
3331 int tda9887;
3332 int addr=ADDR_UNSET;
3333
3334 btv->tuner_type = -1;
3335
3336 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3337 bttv_readee(btv,eeprom_data,0xa0);
3338 identify_by_eeprom(btv,eeprom_data);
3339 }
3340
3341 switch (btv->c.type) {
3342 case BTTV_BOARD_MIRO:
3343 case BTTV_BOARD_MIROPRO:
3344 case BTTV_BOARD_PINNACLE:
3345 case BTTV_BOARD_PINNACLEPRO:
3346 /* miro/pinnacle */
3347 miro_pinnacle_gpio(btv);
3348 break;
3349 case BTTV_BOARD_FLYVIDEO_98:
3350 case BTTV_BOARD_MAXI:
3351 case BTTV_BOARD_LIFE_FLYKIT:
3352 case BTTV_BOARD_FLYVIDEO:
3353 case BTTV_BOARD_TYPHOON_TVIEW:
3354 case BTTV_BOARD_CHRONOS_VS2:
3355 case BTTV_BOARD_FLYVIDEO_98FM:
3356 case BTTV_BOARD_FLYVIDEO2000:
3357 case BTTV_BOARD_FLYVIDEO98EZ:
3358 case BTTV_BOARD_CONFERENCETV:
3359 case BTTV_BOARD_LIFETEC_9415:
3360 flyvideo_gpio(btv);
3361 break;
3362 case BTTV_BOARD_HAUPPAUGE:
3363 case BTTV_BOARD_HAUPPAUGE878:
3364 case BTTV_BOARD_HAUPPAUGEPVR:
3365 /* pick up some config infos from the eeprom */
3366 bttv_readee(btv,eeprom_data,0xa0);
3367 hauppauge_eeprom(btv);
3368 break;
3369 case BTTV_BOARD_AVERMEDIA98:
3370 case BTTV_BOARD_AVPHONE98:
3371 bttv_readee(btv,eeprom_data,0xa0);
3372 avermedia_eeprom(btv);
3373 break;
3374 case BTTV_BOARD_PXC200:
3375 init_PXC200(btv);
3376 break;
3377 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3378 picolo_tetra_init(btv);
3379 break;
3380 case BTTV_BOARD_VHX:
3381 btv->has_radio = 1;
3382 btv->has_matchbox = 1;
3383 btv->mbox_we = 0x20;
3384 btv->mbox_most = 0;
3385 btv->mbox_clk = 0x08;
3386 btv->mbox_data = 0x10;
3387 btv->mbox_mask = 0x38;
3388 break;
3389 case BTTV_BOARD_VOBIS_BOOSTAR:
3390 case BTTV_BOARD_TERRATV:
3391 terratec_active_radio_upgrade(btv);
3392 break;
3393 case BTTV_BOARD_MAGICTVIEW061:
3394 if (btv->cardid == 0x3002144f) {
3395 btv->has_radio=1;
3396 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3397 }
3398 break;
3399 case BTTV_BOARD_STB2:
3400 if (btv->cardid == 0x3060121a) {
3401 /* Fix up entry for 3DFX VoodooTV 100,
3402 which is an OEM STB card variant. */
3403 btv->has_radio=0;
3404 btv->tuner_type=TUNER_TEMIC_NTSC;
3405 }
3406 break;
3407 case BTTV_BOARD_OSPREY1x0:
3408 case BTTV_BOARD_OSPREY1x0_848:
3409 case BTTV_BOARD_OSPREY101_848:
3410 case BTTV_BOARD_OSPREY1x1:
3411 case BTTV_BOARD_OSPREY1x1_SVID:
3412 case BTTV_BOARD_OSPREY2xx:
3413 case BTTV_BOARD_OSPREY2x0_SVID:
3414 case BTTV_BOARD_OSPREY2x0:
3415 case BTTV_BOARD_OSPREY500:
3416 case BTTV_BOARD_OSPREY540:
3417 case BTTV_BOARD_OSPREY2000:
3418 bttv_readee(btv,eeprom_data,0xa0);
3419 osprey_eeprom(btv);
3420 break;
3421 case BTTV_BOARD_IDS_EAGLE:
3422 init_ids_eagle(btv);
3423 break;
3424 case BTTV_BOARD_MODTEC_205:
3425 bttv_readee(btv,eeprom_data,0xa0);
3426 modtec_eeprom(btv);
3427 break;
3428 case BTTV_BOARD_LMLBT4:
3429 init_lmlbt4x(btv);
3430 break;
3431 case BTTV_BOARD_TIBET_CS16:
3432 tibetCS16_init(btv);
3433 break;
3434 case BTTV_BOARD_KODICOM_4400R:
3435 kodicom4400r_init(btv);
3436 break;
3437 }
3438
3439 /* pll configuration */
3440 if (!(btv->id==848 && btv->revision==0x11)) {
3441 /* defaults from card list */
3442 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3443 btv->pll.pll_ifreq=28636363;
3444 btv->pll.pll_crystal=BT848_IFORM_XT0;
3445 }
3446 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3447 btv->pll.pll_ifreq=35468950;
3448 btv->pll.pll_crystal=BT848_IFORM_XT1;
3449 }
3450 /* insmod options can override */
3451 switch (pll[btv->c.nr]) {
3452 case 0: /* none */
3453 btv->pll.pll_crystal = 0;
3454 btv->pll.pll_ifreq = 0;
3455 btv->pll.pll_ofreq = 0;
3456 break;
3457 case 1: /* 28 MHz */
3458 case 28:
3459 btv->pll.pll_ifreq = 28636363;
3460 btv->pll.pll_ofreq = 0;
3461 btv->pll.pll_crystal = BT848_IFORM_XT0;
3462 break;
3463 case 2: /* 35 MHz */
3464 case 35:
3465 btv->pll.pll_ifreq = 35468950;
3466 btv->pll.pll_ofreq = 0;
3467 btv->pll.pll_crystal = BT848_IFORM_XT1;
3468 break;
3469 }
3470 }
3471 btv->pll.pll_current = -1;
3472
3473 /* tuner configuration (from card list / autodetect / insmod option) */
3474 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3475 addr = bttv_tvcards[btv->c.type].tuner_addr;
3476
3477 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3478 if(UNSET == btv->tuner_type)
3479 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3480 if (UNSET != tuner[btv->c.nr])
3481 btv->tuner_type = tuner[btv->c.nr];
3482 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3483
3484 if (btv->tuner_type != UNSET) {
3485 struct tuner_setup tun_setup;
3486
3487 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3488 tun_setup.type = btv->tuner_type;
3489 tun_setup.addr = addr;
3490
3491 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3492 }
3493
3494 if (btv->tda9887_conf) {
3495 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3496 &btv->tda9887_conf);
3497 }
3498
3499 btv->svhs = bttv_tvcards[btv->c.type].svhs;
3500 if (svhs[btv->c.nr] != UNSET)
3501 btv->svhs = svhs[btv->c.nr];
3502 if (remote[btv->c.nr] != UNSET)
3503 btv->has_remote = remote[btv->c.nr];
3504
3505 if (bttv_tvcards[btv->c.type].has_radio)
3506 btv->has_radio=1;
3507 if (bttv_tvcards[btv->c.type].has_remote)
3508 btv->has_remote=1;
3509 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3510 btv->gpioirq=1;
3511 if (bttv_tvcards[btv->c.type].audio_hook)
3512 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3513
3514 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3515 /* detect Bt832 chip for quartzsight digital camera */
3516 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3517 (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3518 boot_bt832(btv);
3519 }
3520
3521 if (!autoload)
3522 return;
3523
3524 /* try to detect audio/fader chips */
3525 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3526 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3527 request_module("msp3400");
3528
3529 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3530 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3531 request_module("msp3400");
3532
3533 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3534 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3535 request_module("tda9875");
3536
3537 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3538 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3539 request_module("tda7432");
3540
3541 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3542 request_module("tvaudio");
3543
3544 /* tuner modules */
3545 tda9887 = 0;
3546 if (btv->tda9887_conf)
3547 tda9887 = 1;
3548 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3549 bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
3550 tda9887 = 1;
3551 /* Hybrid DVB card, DOES have a tda9887 */
3552 if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3553 tda9887 = 1;
3554 if (btv->tuner_type != UNSET)
3555 request_module("tuner");
3556 }
3557
3558
3559 /* ----------------------------------------------------------------------- */
3560
3561 static void modtec_eeprom(struct bttv *btv)
3562 {
3563 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3564 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3565 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3566 btv->c.nr,&eeprom_data[0x1e]);
3567 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3568 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3569 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3570 btv->c.nr,&eeprom_data[0x1e]);
3571 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3572 btv->tuner_type=TUNER_PHILIPS_NTSC;
3573 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3574 btv->c.nr,&eeprom_data[0x1e]);
3575 } else {
3576 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3577 btv->c.nr,&eeprom_data[0x1e]);
3578 }
3579 }
3580
3581 static void __devinit hauppauge_eeprom(struct bttv *btv)
3582 {
3583 struct tveeprom tv;
3584
3585 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3586 btv->tuner_type = tv.tuner_type;
3587 btv->has_radio = tv.has_radio;
3588
3589 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3590 btv->c.nr, tv.model);
3591
3592 /*
3593 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3594 * type based on model #.
3595 */
3596 if(tv.model == 64900) {
3597 printk("bttv%d: Switching board type from %s to %s\n",
3598 btv->c.nr,
3599 bttv_tvcards[btv->c.type].name,
3600 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3601 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3602 }
3603 }
3604
3605 static int terratec_active_radio_upgrade(struct bttv *btv)
3606 {
3607 int freq;
3608
3609 btv->has_radio = 1;
3610 btv->has_matchbox = 1;
3611 btv->mbox_we = 0x10;
3612 btv->mbox_most = 0x20;
3613 btv->mbox_clk = 0x08;
3614 btv->mbox_data = 0x04;
3615 btv->mbox_mask = 0x3c;
3616
3617 btv->mbox_iow = 1 << 8;
3618 btv->mbox_ior = 1 << 9;
3619 btv->mbox_csel = 1 << 10;
3620
3621 freq=88000/62.5;
3622 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3623 if (0x1ed8 == tea5757_read(btv)) {
3624 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3625 btv->c.nr);
3626 btv->has_radio = 1;
3627 btv->has_matchbox = 1;
3628 } else {
3629 btv->has_radio = 0;
3630 btv->has_matchbox = 0;
3631 }
3632 return 0;
3633 }
3634
3635
3636 /* ----------------------------------------------------------------------- */
3637
3638 /*
3639 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3640 *
3641 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3642 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3643 * unpacked with unzip).
3644 */
3645 #define PVR_GPIO_DELAY 10
3646
3647 #define BTTV_ALT_DATA 0x000001
3648 #define BTTV_ALT_DCLK 0x100000
3649 #define BTTV_ALT_NCONFIG 0x800000
3650
3651 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3652 {
3653 u32 n;
3654 u8 bits;
3655 int i;
3656
3657 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3658 gpio_write(0);
3659 udelay(PVR_GPIO_DELAY);
3660
3661 gpio_write(BTTV_ALT_NCONFIG);
3662 udelay(PVR_GPIO_DELAY);
3663
3664 for (n = 0; n < microlen; n++) {
3665 bits = micro[n];
3666 for (i = 0 ; i < 8 ; i++) {
3667 gpio_bits(BTTV_ALT_DCLK,0);
3668 if (bits & 0x01)
3669 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3670 else
3671 gpio_bits(BTTV_ALT_DATA,0);
3672 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3673 bits >>= 1;
3674 }
3675 }
3676 gpio_bits(BTTV_ALT_DCLK,0);
3677 udelay(PVR_GPIO_DELAY);
3678
3679 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3680 for (i = 0 ; i < 30 ; i++) {
3681 gpio_bits(BTTV_ALT_DCLK,0);
3682 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3683 }
3684 gpio_bits(BTTV_ALT_DCLK,0);
3685 return 0;
3686 }
3687
3688 static int __devinit pvr_boot(struct bttv *btv)
3689 {
3690 const struct firmware *fw_entry;
3691 int rc;
3692
3693 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3694 if (rc != 0) {
3695 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3696 btv->c.nr);
3697 return rc;
3698 }
3699 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3700 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3701 btv->c.nr, (rc < 0) ? "failed" : "ok");
3702 release_firmware(fw_entry);
3703 return rc;
3704 }
3705
3706 /* ----------------------------------------------------------------------- */
3707 /* some osprey specific stuff */
3708
3709 static void __devinit osprey_eeprom(struct bttv *btv)
3710 {
3711 int i = 0;
3712 unsigned char *ee = eeprom_data;
3713 unsigned long serial = 0;
3714
3715 if (btv->c.type == 0) {
3716 /* this might be an antique... check for MMAC label in eeprom */
3717 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3718 unsigned char checksum = 0;
3719 for (i = 0; i < 21; i++)
3720 checksum += ee[i];
3721 if (checksum != ee[21])
3722 return;
3723 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3724 for (i = 12; i < 21; i++)
3725 serial *= 10, serial += ee[i] - '0';
3726 }
3727 } else {
3728 unsigned short type;
3729 int offset = 4*16;
3730
3731 for (; offset < 8*16; offset += 16) {
3732 unsigned short checksum = 0;
3733 /* verify the checksum */
3734 for (i = 0; i < 14; i++)
3735 checksum += ee[i+offset];
3736 checksum = ~checksum; /* no idea why */
3737 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3738 ((checksum & 0x0FF) == ee[offset+15])) {
3739 break;
3740 }
3741 }
3742
3743 if (offset >= 8*16)
3744 return;
3745
3746 /* found a valid descriptor */
3747 type = (ee[offset+4]<<8) | (ee[offset+5]);
3748
3749 switch(type) {
3750 /* 848 based */
3751 case 0x0004:
3752 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3753 break;
3754 case 0x0005:
3755 btv->c.type = BTTV_BOARD_OSPREY101_848;
3756 break;
3757
3758 /* 878 based */
3759 case 0x0012:
3760 case 0x0013:
3761 btv->c.type = BTTV_BOARD_OSPREY1x0;
3762 break;
3763 case 0x0014:
3764 case 0x0015:
3765 btv->c.type = BTTV_BOARD_OSPREY1x1;
3766 break;
3767 case 0x0016:
3768 case 0x0017:
3769 case 0x0020:
3770 btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3771 break;
3772 case 0x0018:
3773 case 0x0019:
3774 case 0x001E:
3775 case 0x001F:
3776 btv->c.type = BTTV_BOARD_OSPREY2xx;
3777 break;
3778 case 0x001A:
3779 case 0x001B:
3780 btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3781 break;
3782 case 0x0040:
3783 btv->c.type = BTTV_BOARD_OSPREY500;
3784 break;
3785 case 0x0050:
3786 case 0x0056:
3787 btv->c.type = BTTV_BOARD_OSPREY540;
3788 /* bttv_osprey_540_init(btv); */
3789 break;
3790 case 0x0060:
3791 case 0x0070:
3792 case 0x00A0:
3793 btv->c.type = BTTV_BOARD_OSPREY2x0;
3794 /* enable output on select control lines */
3795 gpio_inout(0xffffff,0x000303);
3796 break;
3797 default:
3798 /* unknown...leave generic, but get serial # */
3799 break;
3800 }
3801 serial = (ee[offset+6] << 24)
3802 | (ee[offset+7] << 16)
3803 | (ee[offset+8] << 8)
3804 | (ee[offset+9]);
3805 }
3806
3807 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3808 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3809 }
3810
3811 /* ----------------------------------------------------------------------- */
3812 /* AVermedia specific stuff, from bktr_card.c */
3813
3814 static int tuner_0_table[] = {
3815 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3816 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3817 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3818 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3819 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3820 TUNER_PHILIPS_FM1216ME_MK3 };
3821
3822 static int tuner_1_table[] = {
3823 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3824 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3825 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3826 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3827 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3828
3829 static void __devinit avermedia_eeprom(struct bttv *btv)
3830 {
3831 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3832
3833 tuner_make = (eeprom_data[0x41] & 0x7);
3834 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3835 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3836 btv->has_remote = (eeprom_data[0x42] & 0x01);
3837
3838 if (tuner_make == 0 || tuner_make == 2)
3839 if(tuner_format <=0x0a)
3840 tuner = tuner_0_table[tuner_format];
3841 if (tuner_make == 1)
3842 if(tuner_format <=9)
3843 tuner = tuner_1_table[tuner_format];
3844
3845 if (tuner_make == 4)
3846 if(tuner_format == 0x09)
3847 tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3848
3849 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3850 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3851 if(tuner) {
3852 btv->tuner_type=tuner;
3853 printk("%d",tuner);
3854 } else
3855 printk("Unknown type");
3856 printk(" radio:%s remote control:%s\n",
3857 tuner_tv_fm ? "yes" : "no",
3858 btv->has_remote ? "yes" : "no");
3859 }
3860
3861 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3862 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3863 {
3864 /* fix up our card entry */
3865 if(norm==VIDEO_MODE_NTSC) {
3866 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3867 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3868 dprintk("bttv_tda9880_setnorm to NTSC\n");
3869 }
3870 else {
3871 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3872 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3873 dprintk("bttv_tda9880_setnorm to PAL\n");
3874 }
3875 /* set GPIO according */
3876 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3877 bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3878 }
3879
3880
3881 /*
3882 * reset/enable the MSP on some Hauppauge cards
3883 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3884 *
3885 * Hauppauge: pin 5
3886 * Voodoo: pin 20
3887 */
3888 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3889 {
3890 int mask = (1 << pin);
3891
3892 gpio_inout(mask,mask);
3893 gpio_bits(mask,0);
3894 udelay(2500);
3895 gpio_bits(mask,mask);
3896
3897 if (bttv_gpio)
3898 bttv_gpio_tracking(btv,"msp34xx");
3899 if (bttv_verbose)
3900 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3901 "init [%d]\n", btv->c.nr, pin);
3902 }
3903
3904 static void __devinit boot_bt832(struct bttv *btv)
3905 {
3906 }
3907
3908 /* ----------------------------------------------------------------------- */
3909 /* Imagenation L-Model PXC200 Framegrabber */
3910 /* This is basically the same procedure as
3911 * used by Alessandro Rubini in his pxc200
3912 * driver, but using BTTV functions */
3913
3914 static void __devinit init_PXC200(struct bttv *btv)
3915 {
3916 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3917 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3918 0x00 };
3919 unsigned int i;
3920 int tmp;
3921 u32 val;
3922
3923 /* Initialise GPIO-connevted stuff */
3924 gpio_inout(0xffffff, (1<<13));
3925 gpio_write(0);
3926 udelay(3);
3927 gpio_write(1<<13);
3928 /* GPIO inputs are pulled up, so no need to drive
3929 * reset pin any longer */
3930 gpio_bits(0xffffff, 0);
3931 if (bttv_gpio)
3932 bttv_gpio_tracking(btv,"pxc200");
3933
3934 /* we could/should try and reset/control the AD pots? but
3935 right now we simply turned off the crushing. Without
3936 this the AGC drifts drifts
3937 remember the EN is reverse logic -->
3938 setting BT848_ADC_AGC_EN disable the AGC
3939 tboult@eecs.lehigh.edu
3940 */
3941
3942 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3943
3944 /* Initialise MAX517 DAC */
3945 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3946 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3947
3948 /* Initialise 12C508 PIC */
3949 /* The I2CWrite and I2CRead commmands are actually to the
3950 * same chips - but the R/W bit is included in the address
3951 * argument so the numbers are different */
3952
3953
3954 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3955
3956 /* First of all, enable the clock line. This is used in the PXC200-F */
3957 val = btread(BT848_GPIO_DMA_CTL);
3958 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3959 btwrite(val, BT848_GPIO_DMA_CTL);
3960
3961 /* Then, push to 0 the reset pin long enough to reset the *
3962 * device same as above for the reset line, but not the same
3963 * value sent to the GPIO-connected stuff
3964 * which one is the good one? */
3965 gpio_inout(0xffffff,(1<<2));
3966 gpio_write(0);
3967 udelay(10);
3968 gpio_write(1<<2);
3969
3970 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3971 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3972 if (tmp != -1) {
3973 printk(KERN_INFO
3974 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3975 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3976 }
3977 }
3978
3979 printk(KERN_INFO "PXC200 Initialised.\n");
3980 }
3981
3982
3983
3984 /* ----------------------------------------------------------------------- */
3985 /*
3986 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3987 * it. This apparently involves the following procedure for each 878 chip:
3988 *
3989 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3990 *
3991 * 2) write to GPIO_DATA
3992 * - 0x0E
3993 * - sleep 1ms
3994 * - 0x10 + 0x0E
3995 * - sleep 10ms
3996 * - 0x0E
3997 * read from GPIO_DATA into buf (uint_32)
3998 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3999 * error. ERROR_CPLD_Check_Failed stop.
4000 *
4001 * 3) write to GPIO_DATA
4002 * - write 0x4400 + 0x0E
4003 * - sleep 10ms
4004 * - write 0x4410 + 0x0E
4005 * - sleep 1ms
4006 * - write 0x0E
4007 * read from GPIO_DATA into buf (uint_32)
4008 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4009 * error. ERROR_CPLD_Check_Failed.
4010 */
4011 /* ----------------------------------------------------------------------- */
4012 static void
4013 init_RTV24 (struct bttv *btv)
4014 {
4015 uint32_t dataRead = 0;
4016 long watchdog_value = 0x0E;
4017
4018 printk (KERN_INFO
4019 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4020 btv->c.nr);
4021
4022 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4023
4024 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4025 msleep (1);
4026 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4027 msleep (10);
4028 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4029
4030 dataRead = btread (BT848_GPIO_DATA);
4031
4032 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4033 printk (KERN_INFO
4034 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4035 btv->c.nr, dataRead);
4036 }
4037
4038 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4039 msleep (10);
4040 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4041 msleep (1);
4042 btwrite (watchdog_value, BT848_GPIO_DATA);
4043 msleep (1);
4044 dataRead = btread (BT848_GPIO_DATA);
4045
4046 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4047 printk (KERN_INFO
4048 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4049 btv->c.nr, dataRead);
4050
4051 return;
4052 }
4053
4054 printk (KERN_INFO
4055 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4056 }
4057
4058
4059
4060 /* ----------------------------------------------------------------------- */
4061 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4062 /*
4063 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4064 * This code is placed under the terms of the GNU General Public License
4065 *
4066 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4067 */
4068
4069 static void bus_low(struct bttv *btv, int bit)
4070 {
4071 if (btv->mbox_ior) {
4072 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4073 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4074 udelay(5);
4075 }
4076
4077 gpio_bits(bit,0);
4078 udelay(5);
4079
4080 if (btv->mbox_ior) {
4081 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4082 udelay(5);
4083 }
4084 }
4085
4086 static void bus_high(struct bttv *btv, int bit)
4087 {
4088 if (btv->mbox_ior) {
4089 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4090 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4091 udelay(5);
4092 }
4093
4094 gpio_bits(bit,bit);
4095 udelay(5);
4096
4097 if (btv->mbox_ior) {
4098 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4099 udelay(5);
4100 }
4101 }
4102
4103 static int bus_in(struct bttv *btv, int bit)
4104 {
4105 if (btv->mbox_ior) {
4106 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4107 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4108 udelay(5);
4109
4110 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4111 udelay(5);
4112 }
4113 return gpio_read() & (bit);
4114 }
4115
4116 /* TEA5757 register bits */
4117 #define TEA_FREQ 0:14
4118 #define TEA_BUFFER 15:15
4119
4120 #define TEA_SIGNAL_STRENGTH 16:17
4121
4122 #define TEA_PORT1 18:18
4123 #define TEA_PORT0 19:19
4124
4125 #define TEA_BAND 20:21
4126 #define TEA_BAND_FM 0
4127 #define TEA_BAND_MW 1
4128 #define TEA_BAND_LW 2
4129 #define TEA_BAND_SW 3
4130
4131 #define TEA_MONO 22:22
4132 #define TEA_ALLOW_STEREO 0
4133 #define TEA_FORCE_MONO 1
4134
4135 #define TEA_SEARCH_DIRECTION 23:23
4136 #define TEA_SEARCH_DOWN 0
4137 #define TEA_SEARCH_UP 1
4138
4139 #define TEA_STATUS 24:24
4140 #define TEA_STATUS_TUNED 0
4141 #define TEA_STATUS_SEARCHING 1
4142
4143 /* Low-level stuff */
4144 static int tea5757_read(struct bttv *btv)
4145 {
4146 unsigned long timeout;
4147 int value = 0;
4148 int i;
4149
4150 /* better safe than sorry */
4151 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4152
4153 if (btv->mbox_ior) {
4154 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4155 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4156 udelay(5);
4157 }
4158
4159 if (bttv_gpio)
4160 bttv_gpio_tracking(btv,"tea5757 read");
4161
4162 bus_low(btv,btv->mbox_we);
4163 bus_low(btv,btv->mbox_clk);
4164
4165 udelay(10);
4166 timeout= jiffies + HZ;
4167
4168 /* wait for DATA line to go low; error if it doesn't */
4169 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4170 schedule();
4171 if (bus_in(btv,btv->mbox_data)) {
4172 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4173 return -1;
4174 }
4175
4176 dprintk("bttv%d: tea5757:",btv->c.nr);
4177 for (i = 0; i < 24; i++) {
4178 udelay(5);
4179 bus_high(btv,btv->mbox_clk);
4180 udelay(5);
4181 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4182 bus_low(btv,btv->mbox_clk);
4183 value <<= 1;
4184 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4185 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4186 }
4187 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4188 return value;
4189 }
4190
4191 static int tea5757_write(struct bttv *btv, int value)
4192 {
4193 int i;
4194 int reg = value;
4195
4196 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4197
4198 if (btv->mbox_ior) {
4199 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4200 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4201 udelay(5);
4202 }
4203 if (bttv_gpio)
4204 bttv_gpio_tracking(btv,"tea5757 write");
4205
4206 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4207 bus_low(btv,btv->mbox_clk);
4208 bus_high(btv,btv->mbox_we);
4209 for (i = 0; i < 25; i++) {
4210 if (reg & 0x1000000)
4211 bus_high(btv,btv->mbox_data);
4212 else
4213 bus_low(btv,btv->mbox_data);
4214 reg <<= 1;
4215 bus_high(btv,btv->mbox_clk);
4216 udelay(10);
4217 bus_low(btv,btv->mbox_clk);
4218 udelay(10);
4219 }
4220 bus_low(btv,btv->mbox_we); /* unmute !!! */
4221 return 0;
4222 }
4223
4224 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4225 {
4226 dprintk("tea5757_set_freq %d\n",freq);
4227 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4228 }
4229
4230
4231 /* ----------------------------------------------------------------------- */
4232 /* winview */
4233
4234 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4235 {
4236 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4237 int bits_out, loops, vol, data;
4238
4239 if (!set) {
4240 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4241 v->flags |= VIDEO_AUDIO_VOLUME;
4242 return;
4243 }
4244
4245 /* 32 levels logarithmic */
4246 vol = 32 - ((v->volume>>11));
4247 /* units */
4248 bits_out = (PT2254_DBS_IN_2>>(vol%5));
4249 /* tens */
4250 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4251 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4252 data = gpio_read();
4253 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4254 WINVIEW_PT2254_STROBE);
4255 for (loops = 17; loops >= 0 ; loops--) {
4256 if (bits_out & (1<<loops))
4257 data |= WINVIEW_PT2254_DATA;
4258 else
4259 data &= ~WINVIEW_PT2254_DATA;
4260 gpio_write(data);
4261 udelay(5);
4262 data |= WINVIEW_PT2254_CLK;
4263 gpio_write(data);
4264 udelay(5);
4265 data &= ~WINVIEW_PT2254_CLK;
4266 gpio_write(data);
4267 }
4268 data |= WINVIEW_PT2254_STROBE;
4269 data &= ~WINVIEW_PT2254_DATA;
4270 gpio_write(data);
4271 udelay(10);
4272 data &= ~WINVIEW_PT2254_STROBE;
4273 gpio_write(data);
4274 }
4275
4276 /* ----------------------------------------------------------------------- */
4277 /* mono/stereo control for various cards (which don't use i2c chips but */
4278 /* connect something to the GPIO pins */
4279
4280 static void
4281 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4282 {
4283 unsigned int con = 0;
4284
4285 if (set) {
4286 gpio_inout(0x300, 0x300);
4287 if (v->mode & VIDEO_SOUND_LANG1)
4288 con = 0x000;
4289 if (v->mode & VIDEO_SOUND_LANG2)
4290 con = 0x300;
4291 if (v->mode & VIDEO_SOUND_STEREO)
4292 con = 0x200;
4293 /* if (v->mode & VIDEO_SOUND_MONO)
4294 * con = 0x100; */
4295 gpio_bits(0x300, con);
4296 } else {
4297 v->mode = VIDEO_SOUND_STEREO |
4298 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4299 }
4300 }
4301
4302 static void
4303 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4304 {
4305 unsigned int val, con;
4306
4307 if (btv->radio_user)
4308 return;
4309
4310 val = gpio_read();
4311 if (set) {
4312 con = 0x000;
4313 if (v->mode & VIDEO_SOUND_LANG2) {
4314 if (v->mode & VIDEO_SOUND_LANG1) {
4315 /* LANG1 + LANG2 */
4316 con = 0x100;
4317 }
4318 else {
4319 /* LANG2 */
4320 con = 0x300;
4321 }
4322 }
4323 if (con != (val & 0x300)) {
4324 gpio_bits(0x300, con);
4325 if (bttv_gpio)
4326 bttv_gpio_tracking(btv,"gvbctv5pci");
4327 }
4328 } else {
4329 switch (val & 0x70) {
4330 case 0x10:
4331 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4332 break;
4333 case 0x30:
4334 v->mode = VIDEO_SOUND_LANG2;
4335 break;
4336 case 0x50:
4337 v->mode = VIDEO_SOUND_LANG1;
4338 break;
4339 case 0x60:
4340 v->mode = VIDEO_SOUND_STEREO;
4341 break;
4342 case 0x70:
4343 v->mode = VIDEO_SOUND_MONO;
4344 break;
4345 default:
4346 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4347 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4348 }
4349 }
4350 }
4351
4352 /*
4353 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4354 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4355 * 0xdde enables mono and 0xccd enables sap
4356 *
4357 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4358 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4359 * input/output sound connection, so both must be set for output mode.
4360 *
4361 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4362 * handles this with a tda9840
4363 *
4364 */
4365 static void
4366 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4367 {
4368 int val = 0;
4369
4370 if (set) {
4371 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4372 val = 0x02;
4373 if (v->mode & VIDEO_SOUND_STEREO)
4374 val = 0x01;
4375 if (val) {
4376 gpio_bits(0x03,val);
4377 if (bttv_gpio)
4378 bttv_gpio_tracking(btv,"avermedia");
4379 }
4380 } else {
4381 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4382 VIDEO_SOUND_LANG1;
4383 return;
4384 }
4385 }
4386
4387 static void
4388 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4389 {
4390 int val = 0;
4391
4392 if (set) {
4393 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4394 val = 0x01;
4395 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
4396 val = 0x02;
4397 btaor(val, ~0x03, BT848_GPIO_DATA);
4398 if (bttv_gpio)
4399 bttv_gpio_tracking(btv,"avermedia");
4400 } else {
4401 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4402 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4403 return;
4404 }
4405 }
4406
4407 /* Lifetec 9415 handling */
4408 static void
4409 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4410 {
4411 int val = 0;
4412
4413 if (gpio_read() & 0x4000) {
4414 v->mode = VIDEO_SOUND_MONO;
4415 return;
4416 }
4417
4418 if (set) {
4419 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
4420 val = 0x0080;
4421 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4422 val = 0x0880;
4423 if ((v->mode & VIDEO_SOUND_LANG1) ||
4424 (v->mode & VIDEO_SOUND_MONO))
4425 val = 0;
4426 gpio_bits(0x0880, val);
4427 if (bttv_gpio)
4428 bttv_gpio_tracking(btv,"lt9415");
4429 } else {
4430 /* autodetect doesn't work with this card :-( */
4431 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4432 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4433 return;
4434 }
4435 }
4436
4437 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4438 static void
4439 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4440 {
4441 unsigned int con = 0;
4442
4443 if (set) {
4444 gpio_inout(0x180000,0x180000);
4445 if (v->mode & VIDEO_SOUND_LANG2)
4446 con = 0x080000;
4447 if (v->mode & VIDEO_SOUND_STEREO)
4448 con = 0x180000;
4449 gpio_bits(0x180000, con);
4450 if (bttv_gpio)
4451 bttv_gpio_tracking(btv,"terratv");
4452 } else {
4453 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4454 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4455 }
4456 }
4457
4458 static void
4459 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4460 {
4461 unsigned long val = 0;
4462
4463 if (set) {
4464 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4465 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
4466 val = 0x420000;
4467 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
4468 val = 0x420000;
4469 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4470 val = 0x410000;
4471 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
4472 val = 0x020000;
4473 if (val) {
4474 gpio_bits(0x430000, val);
4475 if (bttv_gpio)
4476 bttv_gpio_tracking(btv,"winfast2000");
4477 }
4478 } else {
4479 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4480 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4481 }
4482 }
4483
4484 /*
4485 * Dariusz Kowalewski <darekk@automex.pl>
4486 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4487 * revision 9B has on-board TDA9874A sound decoder).
4488 *
4489 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4490 * will mute this cards.
4491 */
4492 static void
4493 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4494 {
4495 unsigned int val = 0;
4496
4497 if (btv->radio_user)
4498 return;
4499
4500 if (set) {
4501 if (v->mode & VIDEO_SOUND_MONO) {
4502 val = 0x01;
4503 }
4504 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4505 || (v->mode & VIDEO_SOUND_STEREO)) {
4506 val = 0x02;
4507 }
4508 if (val) {
4509 gpio_bits(0x03,val);
4510 if (bttv_gpio)
4511 bttv_gpio_tracking(btv,"pvbt878p9b");
4512 }
4513 } else {
4514 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4515 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4516 }
4517 }
4518
4519 /*
4520 * Dariusz Kowalewski <darekk@automex.pl>
4521 * sound control for FlyVideo 2000S (with tda9874 decoder)
4522 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4523 */
4524 static void
4525 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4526 {
4527 unsigned int val = 0xffff;
4528
4529 if (btv->radio_user)
4530 return;
4531 if (set) {
4532 if (v->mode & VIDEO_SOUND_MONO) {
4533 val = 0x0000;
4534 }
4535 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4536 || (v->mode & VIDEO_SOUND_STEREO)) {
4537 val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4538 }
4539 if (val != 0xffff) {
4540 gpio_bits(0x1800, val);
4541 if (bttv_gpio)
4542 bttv_gpio_tracking(btv,"fv2000s");
4543 }
4544 } else {
4545 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4546 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4547 }
4548 }
4549
4550 /*
4551 * sound control for Canopus WinDVR PCI
4552 * Masaki Suzuki <masaki@btree.org>
4553 */
4554 static void
4555 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4556 {
4557 unsigned long val = 0;
4558
4559 if (set) {
4560 if (v->mode & VIDEO_SOUND_MONO)
4561 val = 0x040000;
4562 if (v->mode & VIDEO_SOUND_LANG1)
4563 val = 0;
4564 if (v->mode & VIDEO_SOUND_LANG2)
4565 val = 0x100000;
4566 if (v->mode & VIDEO_SOUND_STEREO)
4567 val = 0;
4568 if (val) {
4569 gpio_bits(0x140000, val);
4570 if (bttv_gpio)
4571 bttv_gpio_tracking(btv,"windvr");
4572 }
4573 } else {
4574 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4575 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4576 }
4577 }
4578
4579 /*
4580 * sound control for AD-TVK503
4581 * Hiroshi Takekawa <sian@big.or.jp>
4582 */
4583 static void
4584 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4585 {
4586 unsigned int con = 0xffffff;
4587
4588 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4589
4590 if (set) {
4591 /* btor(***, BT848_GPIO_OUT_EN); */
4592 if (v->mode & VIDEO_SOUND_LANG1)
4593 con = 0x00000000;
4594 if (v->mode & VIDEO_SOUND_LANG2)
4595 con = 0x00180000;
4596 if (v->mode & VIDEO_SOUND_STEREO)
4597 con = 0x00000000;
4598 if (v->mode & VIDEO_SOUND_MONO)
4599 con = 0x00060000;
4600 if (con != 0xffffff) {
4601 gpio_bits(0x1e0000,con);
4602 if (bttv_gpio)
4603 bttv_gpio_tracking(btv, "adtvk503");
4604 }
4605 } else {
4606 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4607 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4608 }
4609 }
4610
4611 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4612 *
4613 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4614 * switch instead (CD22M3494E). This IC can have multiple active connections
4615 * between Xn (input) and Yn (output) pins. We need to clear any existing
4616 * connection prior to establish a new one, pulsing the STROBE pin.
4617 *
4618 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4619 * GPIO pins are wired as:
4620 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4621 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4622 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4623 * GPIO[8] - - P3[5] (microcontroler)
4624 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4625 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4626 * GPINTR - - P3[4] (microcontroler)
4627 *
4628 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4629 * configuration either directly (as we are doing) or using the microcontroler
4630 * which is also wired to I2C interface. I have no further info on the
4631 * microcontroler features, one would need to disassembly the firmware.
4632 * note: the vendor refused to give any information on this product, all
4633 * that stuff was found using a multimeter! :)
4634 */
4635 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4636 {
4637 /* reset all conections */
4638 gpio_bits(0x200,0x200);
4639 mdelay(1);
4640 gpio_bits(0x200,0x000);
4641 mdelay(1);
4642
4643 /* create a new conection */
4644 gpio_bits(0x480,0x080);
4645 gpio_bits(0x480,0x480);
4646 mdelay(1);
4647 gpio_bits(0x480,0x080);
4648 mdelay(1);
4649 }
4650
4651 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4652 *
4653 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4654 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4655 * chips, ten eight input analog multiplexors, a not chip and a few
4656 * other components.
4657 *
4658 * 16 inputs on a secondary bracket are provided and can be selected
4659 * from each of the four capture chips. Two of the eight input
4660 * multiplexors are used to select from any of the 16 input signals.
4661 *
4662 * Unsupported hardware capabilities:
4663 * . A video output monitor on the secondary bracket can be selected from
4664 * one of the 878A chips.
4665 * . Another passthrough but I haven't spent any time investigating it.
4666 * . Digital I/O (logic level connected to GPIO) is available from an
4667 * onboard header.
4668 *
4669 * The on chip input mux should always be set to 2.
4670 * GPIO[16:19] - Video input selection
4671 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4672 * GPIO[?:?] - Digital I/O.
4673 *
4674 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4675 * determined what function (if any) it provides. With the microcontroller
4676 * and sync seperator chips a guess is that it might have to do with video
4677 * switching and maybe some digital I/O.
4678 */
4679 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4680 {
4681 /* video mux */
4682 gpio_bits(0x0f0000, input << 16);
4683 }
4684
4685 static void tibetCS16_init(struct bttv *btv)
4686 {
4687 /* enable gpio bits, mask obtained via btSpy */
4688 gpio_inout(0xffffff, 0x0f7fff);
4689 gpio_write(0x0f7fff);
4690 }
4691
4692 /*
4693 * The following routines for the Kodicom-4400r get a little mind-twisting.
4694 * There is a "master" controller and three "slave" controllers, together
4695 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4696 * The analog switch is controlled by the "master", but the detection order
4697 * of the four BT878A chips is in an order which I just don't understand.
4698 * The "master" is actually the second controller to be detected. The
4699 * logic on the board uses logical numbers for the 4 controlers, but
4700 * those numbers are different from the detection sequence. When working
4701 * with the analog switch, we need to "map" from the detection sequence
4702 * over to the board's logical controller number. This mapping sequence
4703 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4704 * unit 3, the second (which is the master) is logical unit 0, etc.
4705 * We need to maintain the status of the analog switch (which of the 16
4706 * cameras is connected to which of the 4 controllers). Rather than
4707 * add to the bttv structure for this, we use the data reserved for
4708 * the mbox (unused for this card type).
4709 */
4710
4711 /*
4712 * First a routine to set the analog switch, which controls which camera
4713 * is routed to which controller. The switch comprises an X-address
4714 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4715 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4716 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4717 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4718 * specified address. The idea is to set the address and data, then bring
4719 * STROBE high, and finally bring STROBE back to low.
4720 */
4721 static void kodicom4400r_write(struct bttv *btv,
4722 unsigned char xaddr,
4723 unsigned char yaddr,
4724 unsigned char data) {
4725 unsigned int udata;
4726
4727 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4728 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4729 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4730 gpio_bits(0x1ff, udata); /* strobe low */
4731 }
4732
4733 /*
4734 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4735 * use this routine. The routine finds the "master" for the card, maps
4736 * the controller number from the detected position over to the logical
4737 * number, writes the appropriate data to the analog switch, and housekeeps
4738 * the local copy of the switch information. The parameter 'input' is the
4739 * requested camera number (0 - 15).
4740 */
4741 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4742 {
4743 char *sw_status;
4744 int xaddr, yaddr;
4745 struct bttv *mctlr;
4746 static unsigned char map[4] = {3, 0, 2, 1};
4747
4748 mctlr = master[btv->c.nr];
4749 if (mctlr == NULL) { /* ignore if master not yet detected */
4750 return;
4751 }
4752 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4753 yaddr = map[yaddr];
4754 sw_status = (char *)(&mctlr->mbox_we);
4755 xaddr = input & 0xf;
4756 /* Check if the controller/camera pair has changed, else ignore */
4757 if (sw_status[yaddr] != xaddr)
4758 {
4759 /* "open" the old switch, "close" the new one, save the new */
4760 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4761 sw_status[yaddr] = xaddr;
4762 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4763 }
4764 }
4765
4766 /*
4767 * During initialisation, we need to reset the analog switch. We
4768 * also preset the switch to map the 4 connectors on the card to the
4769 * *user's* (see above description of kodicom4400r_muxsel) channels
4770 * 0 through 3
4771 */
4772 static void kodicom4400r_init(struct bttv *btv)
4773 {
4774 char *sw_status = (char *)(&btv->mbox_we);
4775 int ix;
4776
4777 gpio_inout(0x0003ff, 0x0003ff);
4778 gpio_write(1 << 9); /* reset MUX */
4779 gpio_write(0);
4780 /* Preset camera 0 to the 4 controllers */
4781 for (ix = 0; ix < 4; ix++) {
4782 sw_status[ix] = ix;
4783 kodicom4400r_write(btv, ix, ix, 1);
4784 }
4785 /*
4786 * Since this is the "master", we need to set up the
4787 * other three controller chips' pointers to this structure
4788 * for later use in the muxsel routine.
4789 */
4790 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4791 return;
4792 master[btv->c.nr-1] = btv;
4793 master[btv->c.nr] = btv;
4794 master[btv->c.nr+1] = btv;
4795 master[btv->c.nr+2] = btv;
4796 }
4797
4798 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4799 * video multiplexers to provide up to 16 video inputs. These
4800 * multiplexers are controlled by the lower 8 GPIO pins of the
4801 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4802
4803 * xxx0 is pin xxx of multiplexer U5,
4804 * yyy1 is pin yyy of multiplexer U2
4805 */
4806 #define ENA0 0x01
4807 #define ENB0 0x02
4808 #define ENA1 0x04
4809 #define ENB1 0x08
4810
4811 #define IN10 0x10
4812 #define IN00 0x20
4813 #define IN11 0x40
4814 #define IN01 0x80
4815
4816 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4817 {
4818 static const int masks[] = {
4819 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4820 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4821 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4822 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4823 };
4824 gpio_write(masks[input%16]);
4825 }
4826 static void picolo_tetra_init(struct bttv *btv)
4827 {
4828 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4829 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4830 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4831 }
4832 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4833 {
4834
4835 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4836 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4837 /*GPIO[20]&GPIO[21] used to choose the right input*/
4838 btwrite (input<<20,BT848_GPIO_DATA);
4839
4840 }
4841
4842 /*
4843 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4844 *
4845 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4846 * swichers to provide 16 channels to MUX0. The TDA8540's have
4847 * 4 independent outputs and as such the IVC120G also has the
4848 * optional "Monitor Out" bus. This allows the card to be looking
4849 * at one input while the monitor is looking at another.
4850 *
4851 * Since I've couldn't be bothered figuring out how to add an
4852 * independant muxsel for the monitor bus, I've just set it to
4853 * whatever the card is looking at.
4854 *
4855 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4856 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4857 *
4858 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4859 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4860 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4861 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4862 *
4863 */
4864
4865 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4866 #define I2C_TDA8540 0x90
4867 #define I2C_TDA8540_ALT1 0x92
4868 #define I2C_TDA8540_ALT2 0x94
4869 #define I2C_TDA8540_ALT3 0x96
4870 #define I2C_TDA8540_ALT4 0x98
4871 #define I2C_TDA8540_ALT5 0x9a
4872 #define I2C_TDA8540_ALT6 0x9c
4873
4874 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4875 {
4876 /* Simple maths */
4877 int key = input % 4;
4878 int matrix = input / 4;
4879
4880 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4881 btv->c.nr, input, matrix, key);
4882
4883 /* Handles the input selection on the TDA8540's */
4884 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4885 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4886 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4887 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4888 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4889 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4890 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4891 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4892
4893 /* Handles the output enables on the TDA8540's */
4894 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4895 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4896 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4897 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4898 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4899 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4900 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4901 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4902
4903 /* Selects MUX0 for input on the 878 */
4904 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4905 }
4906
4907
4908 /* PXC200 muxsel helper
4909 * luke@syseng.anu.edu.au
4910 * another transplant
4911 * from Alessandro Rubini (rubini@linux.it)
4912 *
4913 * There are 4 kinds of cards:
4914 * PXC200L which is bt848
4915 * PXC200F which is bt848 with PIC controlling mux
4916 * PXC200AL which is bt878
4917 * PXC200AF which is bt878 with PIC controlling mux
4918 */
4919 #define PX_CFG_PXC200F 0x01
4920 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4921 #define PX_I2C_PIC 0x0f
4922 #define PX_PXC200A_CARDID 0x200a1295
4923 #define PX_I2C_CMD_CFG 0x00
4924
4925 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4926 {
4927 int rc;
4928 long mux;
4929 int bitmask;
4930 unsigned char buf[2];
4931
4932 /* Read PIC config to determine if this is a PXC200F */
4933 /* PX_I2C_CMD_CFG*/
4934 buf[0]=0;
4935 buf[1]=0;
4936 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4937 if (rc) {
4938 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4939 /* not PXC ? do nothing */
4940 return;
4941 }
4942
4943 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4944 if (!(rc & PX_CFG_PXC200F)) {
4945 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4946 return;
4947 }
4948
4949
4950 /* The multiplexer in the 200F is handled by the GPIO port */
4951 /* get correct mapping between inputs */
4952 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4953 /* ** not needed!? */
4954 mux = input;
4955
4956 /* make sure output pins are enabled */
4957 /* bitmask=0x30f; */
4958 bitmask=0x302;
4959 /* check whether we have a PXC200A */
4960 if (btv->cardid == PX_PXC200A_CARDID) {
4961 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4962 bitmask |= 7<<4; /* the DAC */
4963 }
4964 btwrite(bitmask, BT848_GPIO_OUT_EN);
4965
4966 bitmask = btread(BT848_GPIO_DATA);
4967 if (btv->cardid == PX_PXC200A_CARDID)
4968 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4969 else /* older device */
4970 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4971 btwrite(bitmask,BT848_GPIO_DATA);
4972
4973 /*
4974 * Was "to be safe, set the bt848 to input 0"
4975 * Actually, since it's ok at load time, better not messing
4976 * with these bits (on PXC200AF you need to set mux 2 here)
4977 *
4978 * needed because bttv-driver sets mux before calling this function
4979 */
4980 if (btv->cardid == PX_PXC200A_CARDID)
4981 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4982 else /* older device */
4983 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4984
4985 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4986 }
4987
4988 /* ----------------------------------------------------------------------- */
4989 /* motherboard chipset specific stuff */
4990
4991 void __devinit bttv_check_chipset(void)
4992 {
4993 int pcipci_fail = 0;
4994 struct pci_dev *dev = NULL;
4995
4996 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4997 pcipci_fail = 1;
4998 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4999 triton1 = 1;
5000 if (pci_pci_problems & PCIPCI_VSFX)
5001 vsfx = 1;
5002 #ifdef PCIPCI_ALIMAGIK
5003 if (pci_pci_problems & PCIPCI_ALIMAGIK)
5004 latency = 0x0A;
5005 #endif
5006
5007
5008 /* print warnings about any quirks found */
5009 if (triton1)
5010 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
5011 if (vsfx)
5012 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
5013 if (pcipci_fail) {
5014 printk(KERN_INFO "bttv: bttv and your chipset may not work "
5015 "together.\n");
5016 if (!no_overlay) {
5017 printk(KERN_INFO "bttv: overlay will be disabled.\n");
5018 no_overlay = 1;
5019 } else {
5020 printk(KERN_INFO "bttv: overlay forced. Use this "
5021 "option at your own risk.\n");
5022 }
5023 }
5024 if (UNSET != latency)
5025 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5026 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5027 PCI_DEVICE_ID_INTEL_82441, dev))) {
5028 unsigned char b;
5029 pci_read_config_byte(dev, 0x53, &b);
5030 if (bttv_debug)
5031 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5032 "bufcon=0x%02x\n",b);
5033 }
5034 }
5035
5036 int __devinit bttv_handle_chipset(struct bttv *btv)
5037 {
5038 unsigned char command;
5039
5040 if (!triton1 && !vsfx && UNSET == latency)
5041 return 0;
5042
5043 if (bttv_verbose) {
5044 if (triton1)
5045 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5046 if (vsfx && btv->id >= 878)
5047 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5048 if (UNSET != latency)
5049 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5050 btv->c.nr,latency);
5051 }
5052
5053 if (btv->id < 878) {
5054 /* bt848 (mis)uses a bit in the irq mask for etbf */
5055 if (triton1)
5056 btv->triton1 = BT848_INT_ETBF;
5057 } else {
5058 /* bt878 has a bit in the pci config space for it */
5059 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5060 if (triton1)
5061 command |= BT878_EN_TBFX;
5062 if (vsfx)
5063 command |= BT878_EN_VSFX;
5064 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5065 }
5066 if (UNSET != latency)
5067 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
5068 return 0;
5069 }
5070
5071
5072 /*
5073 * Local variables:
5074 * c-basic-offset: 8
5075 * End:
5076 */
Linux kernel - Deliverables
This page took 0.143344 seconds and 5 git commands to generate.