projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
[deliverable/linux.git] / drivers / media / video / bt8xx / bttv-cards.c
1 /*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
30 #include <linux/delay.h>
31 #include <linux/module.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
37 #include <net/checksum.h>
38
39 #include <asm/unaligned.h>
40 #include <asm/io.h>
41
42 #include "bttvp.h"
43 #include <media/v4l2-common.h>
44 #include <media/tvaudio.h>
45 #include "bttv-audio-hook.h"
46
47 /* fwd decl */
48 static void boot_msp34xx(struct bttv *btv, int pin);
49 static void hauppauge_eeprom(struct bttv *btv);
50 static void avermedia_eeprom(struct bttv *btv);
51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
52 static void modtec_eeprom(struct bttv *btv);
53 static void init_PXC200(struct bttv *btv);
54 static void init_RTV24(struct bttv *btv);
55
56 static void rv605_muxsel(struct bttv *btv, unsigned int input);
57 static void eagle_muxsel(struct bttv *btv, unsigned int input);
58 static void xguard_muxsel(struct bttv *btv, unsigned int input);
59 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
60 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
61
62 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
63
64 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
65 static void picolo_tetra_init(struct bttv *btv);
66
67 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
68 static void tibetCS16_init(struct bttv *btv);
69
70 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
71 static void kodicom4400r_init(struct bttv *btv);
72
73 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
74 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
75
76 static void geovision_muxsel(struct bttv *btv, unsigned int input);
77
78 static void phytec_muxsel(struct bttv *btv, unsigned int input);
79
80 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
81 static void gv800s_init(struct bttv *btv);
82
83 static void td3116_muxsel(struct bttv *btv, unsigned int input);
84
85 static int terratec_active_radio_upgrade(struct bttv *btv);
86 static int tea5757_read(struct bttv *btv);
87 static int tea5757_write(struct bttv *btv, int value);
88 static void identify_by_eeprom(struct bttv *btv,
89 unsigned char eeprom_data[256]);
90 static int __devinit pvr_boot(struct bttv *btv);
91
92 /* config variables */
93 static unsigned int triton1;
94 static unsigned int vsfx;
95 static unsigned int latency = UNSET;
96 int no_overlay=-1;
97
98 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
100 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int audiodev[BTTV_MAX];
104 static unsigned int saa6588[BTTV_MAX];
105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
106 static unsigned int autoload = UNSET;
107 static unsigned int gpiomask = UNSET;
108 static unsigned int audioall = UNSET;
109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
110
111 /* insmod options */
112 module_param(triton1, int, 0444);
113 module_param(vsfx, int, 0444);
114 module_param(no_overlay, int, 0444);
115 module_param(latency, int, 0444);
116 module_param(gpiomask, int, 0444);
117 module_param(audioall, int, 0444);
118 module_param(autoload, int, 0444);
119
120 module_param_array(card, int, NULL, 0444);
121 module_param_array(pll, int, NULL, 0444);
122 module_param_array(tuner, int, NULL, 0444);
123 module_param_array(svhs, int, NULL, 0444);
124 module_param_array(remote, int, NULL, 0444);
125 module_param_array(audiodev, int, NULL, 0444);
126 module_param_array(audiomux, int, NULL, 0444);
127
128 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
129 "[enable bug compatibility for triton1 + others]");
130 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
131 "[yet another chipset flaw workaround]");
132 MODULE_PARM_DESC(latency,"pci latency timer");
133 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
134 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
135 MODULE_PARM_DESC(tuner,"specify installed tuner type");
136 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
137 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
138 "\t\t-1 = no audio\n"
139 "\t\t 0 = autodetect (default)\n"
140 "\t\t 1 = msp3400\n"
141 "\t\t 2 = tda7432\n"
142 "\t\t 3 = tvaudio");
143 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
144 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
145 " [some VIA/SIS chipsets are known to have problem with overlay]");
146
147 /* ----------------------------------------------------------------------- */
148 /* list of card IDs for bt878+ cards */
149
150 static struct CARD {
151 unsigned id;
152 int cardnr;
153 char *name;
154 } cards[] __devinitdata = {
155 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
156 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
157 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
158 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
159 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
160 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
161 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
162 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
163 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
164
165 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
166 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
167
168 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
169 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
170 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
171 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
172 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
173 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
174 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
175 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
176 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
177
178 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
179 /* some cards ship with byteswapped IDs ... */
180 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
181 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
182 /* this seems to happen as well ... */
183 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
184
185 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
186 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
187 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
188
189 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
190 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
191 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
192 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
193 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
194 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
195 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
196
197 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
198 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
199 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
200 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
201 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
202
203 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
204 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
205 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
206 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
207
208 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
209 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
210 /* clashes with FlyVideo
211 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
212 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
213 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
214 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
215 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
216
217 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
218 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
219 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
220 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
221 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
222
223 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
224 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
225 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
226 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
227 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
228
229 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
230 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
231 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
232 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
233
234 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
235 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
236 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
237 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
238
239 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
240 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
241 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
242 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
243 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
244 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
245 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
246 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
247 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
248 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
249 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
250 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
251 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
252 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
262 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
263 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
264 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
265 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
266 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
267 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
268 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
269 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
270 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
271 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
272
273 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
274 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
275
276 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
277 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
278 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
279 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
280 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
281 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
282
283 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
284 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
285
286 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
287 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
288 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
289 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
290 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
291 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
292 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
293 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
294 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
295 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
296
297 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
298 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
299
300 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
301 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
302 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
303 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
304
305 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
306
307 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
308 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
309
310 /* likely broken, vendor id doesn't match the other magic views ...
311 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
312
313 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
314 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
315
316 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
317
318 /* DVB cards (using pci function .1 for mpeg data xfer) */
319 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
320 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
321 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
322 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
323 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
324 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
325 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
326 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
327 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
328 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
329 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
330 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
331 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
332 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
333 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
334 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
335 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
336 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
337 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
338
339 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
340 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
341 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
342 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
343 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
344 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
345 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
346 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
347 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" },
348
349 { 0, -1, NULL }
350 };
351
352 /* ----------------------------------------------------------------------- */
353 /* array with description for bt848 / bt878 tv/grabber cards */
354
355 struct tvcard bttv_tvcards[] = {
356 /* ---- card 0x00 ---------------------------------- */
357 [BTTV_BOARD_UNKNOWN] = {
358 .name = " *** UNKNOWN/GENERIC *** ",
359 .video_inputs = 4,
360 .svhs = 2,
361 .muxsel = MUXSEL(2, 3, 1, 0),
362 .tuner_type = UNSET,
363 .tuner_addr = ADDR_UNSET,
364 },
365 [BTTV_BOARD_MIRO] = {
366 .name = "MIRO PCTV",
367 .video_inputs = 4,
368 /* .audio_inputs= 1, */
369 .svhs = 2,
370 .gpiomask = 15,
371 .muxsel = MUXSEL(2, 3, 1, 1),
372 .gpiomux = { 2, 0, 0, 0 },
373 .gpiomute = 10,
374 .needs_tvaudio = 1,
375 .tuner_type = UNSET,
376 .tuner_addr = ADDR_UNSET,
377 },
378 [BTTV_BOARD_HAUPPAUGE] = {
379 .name = "Hauppauge (bt848)",
380 .video_inputs = 4,
381 /* .audio_inputs= 1, */
382 .svhs = 2,
383 .gpiomask = 7,
384 .muxsel = MUXSEL(2, 3, 1, 1),
385 .gpiomux = { 0, 1, 2, 3 },
386 .gpiomute = 4,
387 .needs_tvaudio = 1,
388 .tuner_type = UNSET,
389 .tuner_addr = ADDR_UNSET,
390 },
391 [BTTV_BOARD_STB] = {
392 .name = "STB, Gateway P/N 6000699 (bt848)",
393 .video_inputs = 3,
394 /* .audio_inputs= 1, */
395 .svhs = 2,
396 .gpiomask = 7,
397 .muxsel = MUXSEL(2, 3, 1, 1),
398 .gpiomux = { 4, 0, 2, 3 },
399 .gpiomute = 1,
400 .no_msp34xx = 1,
401 .needs_tvaudio = 1,
402 .tuner_type = TUNER_PHILIPS_NTSC,
403 .tuner_addr = ADDR_UNSET,
404 .pll = PLL_28,
405 .has_radio = 1,
406 },
407
408 /* ---- card 0x04 ---------------------------------- */
409 [BTTV_BOARD_INTEL] = {
410 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
411 .video_inputs = 4,
412 /* .audio_inputs= 0, */
413 .svhs = 2,
414 .gpiomask = 0,
415 .muxsel = MUXSEL(2, 3, 1, 1),
416 .gpiomux = { 0 },
417 .needs_tvaudio = 0,
418 .tuner_type = TUNER_ABSENT,
419 .tuner_addr = ADDR_UNSET,
420 },
421 [BTTV_BOARD_DIAMOND] = {
422 .name = "Diamond DTV2000",
423 .video_inputs = 4,
424 /* .audio_inputs= 1, */
425 .svhs = 2,
426 .gpiomask = 3,
427 .muxsel = MUXSEL(2, 3, 1, 0),
428 .gpiomux = { 0, 1, 0, 1 },
429 .gpiomute = 3,
430 .needs_tvaudio = 1,
431 .tuner_type = UNSET,
432 .tuner_addr = ADDR_UNSET,
433 },
434 [BTTV_BOARD_AVERMEDIA] = {
435 .name = "AVerMedia TVPhone",
436 .video_inputs = 3,
437 /* .audio_inputs= 1, */
438 .svhs = 3,
439 .muxsel = MUXSEL(2, 3, 1, 1),
440 .gpiomask = 0x0f,
441 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
442 /* 0x04 for some cards ?? */
443 .needs_tvaudio = 1,
444 .tuner_type = UNSET,
445 .tuner_addr = ADDR_UNSET,
446 .audio_mode_gpio= avermedia_tvphone_audio,
447 .has_remote = 1,
448 },
449 [BTTV_BOARD_MATRIX_VISION] = {
450 .name = "MATRIX-Vision MV-Delta",
451 .video_inputs = 5,
452 /* .audio_inputs= 1, */
453 .svhs = 3,
454 .gpiomask = 0,
455 .muxsel = MUXSEL(2, 3, 1, 0, 0),
456 .gpiomux = { 0 },
457 .needs_tvaudio = 1,
458 .tuner_type = TUNER_ABSENT,
459 .tuner_addr = ADDR_UNSET,
460 },
461
462 /* ---- card 0x08 ---------------------------------- */
463 [BTTV_BOARD_FLYVIDEO] = {
464 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
465 .video_inputs = 4,
466 /* .audio_inputs= 1, */
467 .svhs = 2,
468 .gpiomask = 0xc00,
469 .muxsel = MUXSEL(2, 3, 1, 1),
470 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
471 .gpiomute = 0xc00,
472 .needs_tvaudio = 1,
473 .pll = PLL_28,
474 .tuner_type = UNSET,
475 .tuner_addr = ADDR_UNSET,
476 },
477 [BTTV_BOARD_TURBOTV] = {
478 .name = "IMS/IXmicro TurboTV",
479 .video_inputs = 3,
480 /* .audio_inputs= 1, */
481 .svhs = 2,
482 .gpiomask = 3,
483 .muxsel = MUXSEL(2, 3, 1, 1),
484 .gpiomux = { 1, 1, 2, 3 },
485 .needs_tvaudio = 0,
486 .pll = PLL_28,
487 .tuner_type = TUNER_TEMIC_PAL,
488 .tuner_addr = ADDR_UNSET,
489 },
490 [BTTV_BOARD_HAUPPAUGE878] = {
491 .name = "Hauppauge (bt878)",
492 .video_inputs = 4,
493 /* .audio_inputs= 1, */
494 .svhs = 2,
495 .gpiomask = 0x0f, /* old: 7 */
496 .muxsel = MUXSEL(2, 0, 1, 1),
497 .gpiomux = { 0, 1, 2, 3 },
498 .gpiomute = 4,
499 .needs_tvaudio = 1,
500 .pll = PLL_28,
501 .tuner_type = UNSET,
502 .tuner_addr = ADDR_UNSET,
503 },
504 [BTTV_BOARD_MIROPRO] = {
505 .name = "MIRO PCTV pro",
506 .video_inputs = 3,
507 /* .audio_inputs= 1, */
508 .svhs = 2,
509 .gpiomask = 0x3014f,
510 .muxsel = MUXSEL(2, 3, 1, 1),
511 .gpiomux = { 0x20001,0x10001, 0, 0 },
512 .gpiomute = 10,
513 .needs_tvaudio = 1,
514 .tuner_type = UNSET,
515 .tuner_addr = ADDR_UNSET,
516 },
517
518 /* ---- card 0x0c ---------------------------------- */
519 [BTTV_BOARD_ADSTECH_TV] = {
520 .name = "ADS Technologies Channel Surfer TV (bt848)",
521 .video_inputs = 3,
522 /* .audio_inputs= 1, */
523 .svhs = 2,
524 .gpiomask = 15,
525 .muxsel = MUXSEL(2, 3, 1, 1),
526 .gpiomux = { 13, 14, 11, 7 },
527 .needs_tvaudio = 1,
528 .tuner_type = UNSET,
529 .tuner_addr = ADDR_UNSET,
530 },
531 [BTTV_BOARD_AVERMEDIA98] = {
532 .name = "AVerMedia TVCapture 98",
533 .video_inputs = 3,
534 /* .audio_inputs= 4, */
535 .svhs = 2,
536 .gpiomask = 15,
537 .muxsel = MUXSEL(2, 3, 1, 1),
538 .gpiomux = { 13, 14, 11, 7 },
539 .needs_tvaudio = 1,
540 .msp34xx_alt = 1,
541 .pll = PLL_28,
542 .tuner_type = TUNER_PHILIPS_PAL,
543 .tuner_addr = ADDR_UNSET,
544 .audio_mode_gpio= avermedia_tv_stereo_audio,
545 .no_gpioirq = 1,
546 },
547 [BTTV_BOARD_VHX] = {
548 .name = "Aimslab Video Highway Xtreme (VHX)",
549 .video_inputs = 3,
550 /* .audio_inputs= 1, */
551 .svhs = 2,
552 .gpiomask = 7,
553 .muxsel = MUXSEL(2, 3, 1, 1),
554 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
555 .gpiomute = 4,
556 .needs_tvaudio = 1,
557 .pll = PLL_28,
558 .tuner_type = UNSET,
559 .tuner_addr = ADDR_UNSET,
560 },
561 [BTTV_BOARD_ZOLTRIX] = {
562 .name = "Zoltrix TV-Max",
563 .video_inputs = 3,
564 /* .audio_inputs= 1, */
565 .svhs = 2,
566 .gpiomask = 15,
567 .muxsel = MUXSEL(2, 3, 1, 1),
568 .gpiomux = { 0, 0, 1, 0 },
569 .gpiomute = 10,
570 .needs_tvaudio = 1,
571 .tuner_type = UNSET,
572 .tuner_addr = ADDR_UNSET,
573 },
574
575 /* ---- card 0x10 ---------------------------------- */
576 [BTTV_BOARD_PIXVIEWPLAYTV] = {
577 .name = "Prolink Pixelview PlayTV (bt878)",
578 .video_inputs = 3,
579 /* .audio_inputs= 1, */
580 .svhs = 2,
581 .gpiomask = 0x01fe00,
582 .muxsel = MUXSEL(2, 3, 1, 1),
583 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
584 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
585 .gpiomute = 0x002000,
586 .needs_tvaudio = 1,
587 .pll = PLL_28,
588 .tuner_type = UNSET,
589 .tuner_addr = ADDR_UNSET,
590 },
591 [BTTV_BOARD_WINVIEW_601] = {
592 .name = "Leadtek WinView 601",
593 .video_inputs = 3,
594 /* .audio_inputs= 1, */
595 .svhs = 2,
596 .gpiomask = 0x8300f8,
597 .muxsel = MUXSEL(2, 3, 1, 1, 0),
598 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
599 .gpiomute = 0xcfa007,
600 .needs_tvaudio = 1,
601 .tuner_type = UNSET,
602 .tuner_addr = ADDR_UNSET,
603 .volume_gpio = winview_volume,
604 .has_radio = 1,
605 },
606 [BTTV_BOARD_AVEC_INTERCAP] = {
607 .name = "AVEC Intercapture",
608 .video_inputs = 3,
609 /* .audio_inputs= 2, */
610 .svhs = 2,
611 .gpiomask = 0,
612 .muxsel = MUXSEL(2, 3, 1, 1),
613 .gpiomux = { 1, 0, 0, 0 },
614 .needs_tvaudio = 1,
615 .tuner_type = UNSET,
616 .tuner_addr = ADDR_UNSET,
617 },
618 [BTTV_BOARD_LIFE_FLYKIT] = {
619 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
620 .video_inputs = 4,
621 /* .audio_inputs= 1, */
622 .svhs = NO_SVHS,
623 .gpiomask = 0x8dff00,
624 .muxsel = MUXSEL(2, 3, 1, 1),
625 .gpiomux = { 0 },
626 .no_msp34xx = 1,
627 .tuner_type = TUNER_ABSENT,
628 .tuner_addr = ADDR_UNSET,
629 },
630
631 /* ---- card 0x14 ---------------------------------- */
632 [BTTV_BOARD_CEI_RAFFLES] = {
633 .name = "CEI Raffles Card",
634 .video_inputs = 3,
635 /* .audio_inputs= 3, */
636 .svhs = 2,
637 .muxsel = MUXSEL(2, 3, 1, 1),
638 .tuner_type = UNSET,
639 .tuner_addr = ADDR_UNSET,
640 },
641 [BTTV_BOARD_CONFERENCETV] = {
642 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
643 .video_inputs = 4,
644 /* .audio_inputs= 2, tuner, line in */
645 .svhs = 2,
646 .gpiomask = 0x1800,
647 .muxsel = MUXSEL(2, 3, 1, 1),
648 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
649 .gpiomute = 0x1800,
650 .pll = PLL_28,
651 .tuner_type = TUNER_PHILIPS_PAL_I,
652 .tuner_addr = ADDR_UNSET,
653 },
654 [BTTV_BOARD_PHOEBE_TVMAS] = {
655 .name = "Askey CPH050/ Phoebe Tv Master + FM",
656 .video_inputs = 3,
657 /* .audio_inputs= 1, */
658 .svhs = 2,
659 .gpiomask = 0xc00,
660 .muxsel = MUXSEL(2, 3, 1, 1),
661 .gpiomux = { 0, 1, 0x800, 0x400 },
662 .gpiomute = 0xc00,
663 .needs_tvaudio = 1,
664 .pll = PLL_28,
665 .tuner_type = UNSET,
666 .tuner_addr = ADDR_UNSET,
667 },
668 [BTTV_BOARD_MODTEC_205] = {
669 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
670 .video_inputs = 3,
671 /* .audio_inputs= 1, */
672 .svhs = NO_SVHS,
673 .has_dig_in = 1,
674 .gpiomask = 7,
675 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
676 /* .digital_mode= DIGITAL_MODE_CAMERA, */
677 .gpiomux = { 0, 0, 0, 0 },
678 .no_msp34xx = 1,
679 .pll = PLL_28,
680 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
681 .tuner_addr = ADDR_UNSET,
682 },
683
684 /* ---- card 0x18 ---------------------------------- */
685 [BTTV_BOARD_MAGICTVIEW061] = {
686 .name = "Askey CPH05X/06X (bt878) [many vendors]",
687 .video_inputs = 3,
688 /* .audio_inputs= 1, */
689 .svhs = 2,
690 .gpiomask = 0xe00,
691 .muxsel = MUXSEL(2, 3, 1, 1),
692 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
693 .gpiomute = 0xc00,
694 .needs_tvaudio = 1,
695 .pll = PLL_28,
696 .tuner_type = UNSET,
697 .tuner_addr = ADDR_UNSET,
698 .has_remote = 1,
699 },
700 [BTTV_BOARD_VOBIS_BOOSTAR] = {
701 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
702 .video_inputs = 3,
703 /* .audio_inputs= 1, */
704 .svhs = 2,
705 .gpiomask = 0x1f0fff,
706 .muxsel = MUXSEL(2, 3, 1, 1),
707 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
708 .gpiomute = 0x40000,
709 .needs_tvaudio = 0,
710 .tuner_type = TUNER_PHILIPS_PAL,
711 .tuner_addr = ADDR_UNSET,
712 .audio_mode_gpio= terratv_audio,
713 },
714 [BTTV_BOARD_HAUPPAUG_WCAM] = {
715 .name = "Hauppauge WinCam newer (bt878)",
716 .video_inputs = 4,
717 /* .audio_inputs= 1, */
718 .svhs = 3,
719 .gpiomask = 7,
720 .muxsel = MUXSEL(2, 0, 1, 1),
721 .gpiomux = { 0, 1, 2, 3 },
722 .gpiomute = 4,
723 .needs_tvaudio = 1,
724 .tuner_type = UNSET,
725 .tuner_addr = ADDR_UNSET,
726 },
727 [BTTV_BOARD_MAXI] = {
728 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
729 .video_inputs = 4,
730 /* .audio_inputs= 2, */
731 .svhs = 2,
732 .gpiomask = 0x1800,
733 .muxsel = MUXSEL(2, 3, 1, 1),
734 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
735 .gpiomute = 0x1800,
736 .pll = PLL_28,
737 .tuner_type = TUNER_PHILIPS_SECAM,
738 .tuner_addr = ADDR_UNSET,
739 },
740
741 /* ---- card 0x1c ---------------------------------- */
742 [BTTV_BOARD_TERRATV] = {
743 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
744 .video_inputs = 3,
745 /* .audio_inputs= 1, */
746 .svhs = 2,
747 .gpiomask = 0x1f0fff,
748 .muxsel = MUXSEL(2, 3, 1, 1),
749 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
750 .gpiomute = 0x40000,
751 .needs_tvaudio = 0,
752 .tuner_type = TUNER_PHILIPS_PAL,
753 .tuner_addr = ADDR_UNSET,
754 .audio_mode_gpio= terratv_audio,
755 /* GPIO wiring:
756 External 20 pin connector (for Active Radio Upgrade board)
757 gpio00: i2c-sda
758 gpio01: i2c-scl
759 gpio02: om5610-data
760 gpio03: om5610-clk
761 gpio04: om5610-wre
762 gpio05: om5610-stereo
763 gpio06: rds6588-davn
764 gpio07: Pin 7 n.c.
765 gpio08: nIOW
766 gpio09+10: nIOR, nSEL ?? (bt878)
767 gpio09: nIOR (bt848)
768 gpio10: nSEL (bt848)
769 Sound Routing:
770 gpio16: u2-A0 (1st 4052bt)
771 gpio17: u2-A1
772 gpio18: u2-nEN
773 gpio19: u4-A0 (2nd 4052)
774 gpio20: u4-A1
775 u4-nEN - GND
776 Btspy:
777 00000 : Cdrom (internal audio input)
778 10000 : ext. Video audio input
779 20000 : TV Mono
780 a0000 : TV Mono/2
781 1a0000 : TV Stereo
782 30000 : Radio
783 40000 : Mute
784 */
785
786 },
787 [BTTV_BOARD_PXC200] = {
788 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
789 .name = "Imagenation PXC200",
790 .video_inputs = 5,
791 /* .audio_inputs= 1, */
792 .svhs = 1, /* was: 4 */
793 .gpiomask = 0,
794 .muxsel = MUXSEL(2, 3, 1, 0, 0),
795 .gpiomux = { 0 },
796 .needs_tvaudio = 1,
797 .tuner_type = TUNER_ABSENT,
798 .tuner_addr = ADDR_UNSET,
799 .muxsel_hook = PXC200_muxsel,
800
801 },
802 [BTTV_BOARD_FLYVIDEO_98] = {
803 .name = "Lifeview FlyVideo 98 LR50",
804 .video_inputs = 4,
805 /* .audio_inputs= 1, */
806 .svhs = 2,
807 .gpiomask = 0x1800, /* 0x8dfe00 */
808 .muxsel = MUXSEL(2, 3, 1, 1),
809 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
810 .gpiomute = 0x1800,
811 .pll = PLL_28,
812 .tuner_type = UNSET,
813 .tuner_addr = ADDR_UNSET,
814 },
815 [BTTV_BOARD_IPROTV] = {
816 .name = "Formac iProTV, Formac ProTV I (bt848)",
817 .video_inputs = 4,
818 /* .audio_inputs= 1, */
819 .svhs = 3,
820 .gpiomask = 1,
821 .muxsel = MUXSEL(2, 3, 1, 1),
822 .gpiomux = { 1, 0, 0, 0 },
823 .pll = PLL_28,
824 .tuner_type = TUNER_PHILIPS_PAL,
825 .tuner_addr = ADDR_UNSET,
826 },
827
828 /* ---- card 0x20 ---------------------------------- */
829 [BTTV_BOARD_INTEL_C_S_PCI] = {
830 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
831 .video_inputs = 4,
832 /* .audio_inputs= 0, */
833 .svhs = 2,
834 .gpiomask = 0,
835 .muxsel = MUXSEL(2, 3, 1, 1),
836 .gpiomux = { 0 },
837 .needs_tvaudio = 0,
838 .tuner_type = TUNER_ABSENT,
839 .tuner_addr = ADDR_UNSET,
840 },
841 [BTTV_BOARD_TERRATVALUE] = {
842 .name = "Terratec TerraTValue Version Bt878",
843 .video_inputs = 3,
844 /* .audio_inputs= 1, */
845 .svhs = 2,
846 .gpiomask = 0xffff00,
847 .muxsel = MUXSEL(2, 3, 1, 1),
848 .gpiomux = { 0x500, 0, 0x300, 0x900 },
849 .gpiomute = 0x900,
850 .needs_tvaudio = 1,
851 .pll = PLL_28,
852 .tuner_type = TUNER_PHILIPS_PAL,
853 .tuner_addr = ADDR_UNSET,
854 },
855 [BTTV_BOARD_WINFAST2000] = {
856 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
857 .video_inputs = 4,
858 /* .audio_inputs= 1, */
859 .svhs = 2,
860 /* TV, CVid, SVid, CVid over SVid connector */
861 .muxsel = MUXSEL(2, 3, 1, 1, 0),
862 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
863 .gpiomask = 0xb33000,
864 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
865 .gpiomute = 0x800000,
866 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
867 gpio23 -- hef4052:nEnable (0x800000)
868 gpio12 -- hef4052:A1
869 gpio13 -- hef4052:A0
870 0x0000: external audio
871 0x1000: FM
872 0x2000: TV
873 0x3000: n.c.
874 Note: There exists another variant "Winfast 2000" with tv stereo !?
875 Note: eeprom only contains FF and pci subsystem id 107d:6606
876 */
877 .needs_tvaudio = 0,
878 .pll = PLL_28,
879 .has_radio = 1,
880 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
881 .tuner_addr = ADDR_UNSET,
882 .audio_mode_gpio= winfast2000_audio,
883 .has_remote = 1,
884 },
885 [BTTV_BOARD_CHRONOS_VS2] = {
886 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
887 .video_inputs = 4,
888 /* .audio_inputs= 3, */
889 .svhs = 2,
890 .gpiomask = 0x1800,
891 .muxsel = MUXSEL(2, 3, 1, 1),
892 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
893 .gpiomute = 0x1800,
894 .pll = PLL_28,
895 .tuner_type = UNSET,
896 .tuner_addr = ADDR_UNSET,
897 },
898
899 /* ---- card 0x24 ---------------------------------- */
900 [BTTV_BOARD_TYPHOON_TVIEW] = {
901 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
902 .video_inputs = 4,
903 /* .audio_inputs= 3, */
904 .svhs = 2,
905 .gpiomask = 0x1800,
906 .muxsel = MUXSEL(2, 3, 1, 1),
907 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
908 .gpiomute = 0x1800,
909 .pll = PLL_28,
910 .tuner_type = UNSET,
911 .tuner_addr = ADDR_UNSET,
912 .has_radio = 1,
913 },
914 [BTTV_BOARD_PXELVWPLTVPRO] = {
915 .name = "Prolink PixelView PlayTV pro",
916 .video_inputs = 3,
917 /* .audio_inputs= 1, */
918 .svhs = 2,
919 .gpiomask = 0xff,
920 .muxsel = MUXSEL(2, 3, 1, 1),
921 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
922 .gpiomute = 0x29,
923 .no_msp34xx = 1,
924 .pll = PLL_28,
925 .tuner_type = UNSET,
926 .tuner_addr = ADDR_UNSET,
927 },
928 [BTTV_BOARD_MAGICTVIEW063] = {
929 .name = "Askey CPH06X TView99",
930 .video_inputs = 4,
931 /* .audio_inputs= 1, */
932 .svhs = 2,
933 .gpiomask = 0x551e00,
934 .muxsel = MUXSEL(2, 3, 1, 0),
935 .gpiomux = { 0x551400, 0x551200, 0, 0 },
936 .gpiomute = 0x551c00,
937 .needs_tvaudio = 1,
938 .pll = PLL_28,
939 .tuner_type = TUNER_PHILIPS_PAL_I,
940 .tuner_addr = ADDR_UNSET,
941 .has_remote = 1,
942 },
943 [BTTV_BOARD_PINNACLE] = {
944 .name = "Pinnacle PCTV Studio/Rave",
945 .video_inputs = 3,
946 /* .audio_inputs= 1, */
947 .svhs = 2,
948 .gpiomask = 0x03000F,
949 .muxsel = MUXSEL(2, 3, 1, 1),
950 .gpiomux = { 2, 0xd0001, 0, 0 },
951 .gpiomute = 1,
952 .needs_tvaudio = 0,
953 .pll = PLL_28,
954 .tuner_type = UNSET,
955 .tuner_addr = ADDR_UNSET,
956 },
957
958 /* ---- card 0x28 ---------------------------------- */
959 [BTTV_BOARD_STB2] = {
960 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
961 .video_inputs = 3,
962 /* .audio_inputs= 1, */
963 .svhs = 2,
964 .gpiomask = 7,
965 .muxsel = MUXSEL(2, 3, 1, 1),
966 .gpiomux = { 4, 0, 2, 3 },
967 .gpiomute = 1,
968 .no_msp34xx = 1,
969 .needs_tvaudio = 1,
970 .tuner_type = TUNER_PHILIPS_NTSC,
971 .tuner_addr = ADDR_UNSET,
972 .pll = PLL_28,
973 .has_radio = 1,
974 },
975 [BTTV_BOARD_AVPHONE98] = {
976 .name = "AVerMedia TVPhone 98",
977 .video_inputs = 3,
978 /* .audio_inputs= 4, */
979 .svhs = 2,
980 .gpiomask = 15,
981 .muxsel = MUXSEL(2, 3, 1, 1),
982 .gpiomux = { 13, 4, 11, 7 },
983 .needs_tvaudio = 1,
984 .pll = PLL_28,
985 .tuner_type = UNSET,
986 .tuner_addr = ADDR_UNSET,
987 .has_radio = 1,
988 .audio_mode_gpio= avermedia_tvphone_audio,
989 },
990 [BTTV_BOARD_PV951] = {
991 .name = "ProVideo PV951", /* pic16c54 */
992 .video_inputs = 3,
993 /* .audio_inputs= 1, */
994 .svhs = 2,
995 .gpiomask = 0,
996 .muxsel = MUXSEL(2, 3, 1, 1),
997 .gpiomux = { 0, 0, 0, 0},
998 .needs_tvaudio = 1,
999 .no_msp34xx = 1,
1000 .pll = PLL_28,
1001 .tuner_type = TUNER_PHILIPS_PAL_I,
1002 .tuner_addr = ADDR_UNSET,
1003 },
1004 [BTTV_BOARD_ONAIR_TV] = {
1005 .name = "Little OnAir TV",
1006 .video_inputs = 3,
1007 /* .audio_inputs= 1, */
1008 .svhs = 2,
1009 .gpiomask = 0xe00b,
1010 .muxsel = MUXSEL(2, 3, 1, 1),
1011 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1012 .gpiomute = 0xff3ffc,
1013 .no_msp34xx = 1,
1014 .tuner_type = UNSET,
1015 .tuner_addr = ADDR_UNSET,
1016 },
1017
1018 /* ---- card 0x2c ---------------------------------- */
1019 [BTTV_BOARD_SIGMA_TVII_FM] = {
1020 .name = "Sigma TVII-FM",
1021 .video_inputs = 2,
1022 /* .audio_inputs= 1, */
1023 .svhs = NO_SVHS,
1024 .gpiomask = 3,
1025 .muxsel = MUXSEL(2, 3, 1, 1),
1026 .gpiomux = { 1, 1, 0, 2 },
1027 .gpiomute = 3,
1028 .no_msp34xx = 1,
1029 .pll = PLL_NONE,
1030 .tuner_type = UNSET,
1031 .tuner_addr = ADDR_UNSET,
1032 },
1033 [BTTV_BOARD_MATRIX_VISION2] = {
1034 .name = "MATRIX-Vision MV-Delta 2",
1035 .video_inputs = 5,
1036 /* .audio_inputs= 1, */
1037 .svhs = 3,
1038 .gpiomask = 0,
1039 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1040 .gpiomux = { 0 },
1041 .no_msp34xx = 1,
1042 .pll = PLL_28,
1043 .tuner_type = TUNER_ABSENT,
1044 .tuner_addr = ADDR_UNSET,
1045 },
1046 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1047 .name = "Zoltrix Genie TV/FM",
1048 .video_inputs = 3,
1049 /* .audio_inputs= 1, */
1050 .svhs = 2,
1051 .gpiomask = 0xbcf03f,
1052 .muxsel = MUXSEL(2, 3, 1, 1),
1053 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1054 .gpiomute = 0xbcb03f,
1055 .no_msp34xx = 1,
1056 .pll = PLL_28,
1057 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1058 .tuner_addr = ADDR_UNSET,
1059 },
1060 [BTTV_BOARD_TERRATVRADIO] = {
1061 .name = "Terratec TV/Radio+",
1062 .video_inputs = 3,
1063 /* .audio_inputs= 1, */
1064 .svhs = 2,
1065 .gpiomask = 0x70000,
1066 .muxsel = MUXSEL(2, 3, 1, 1),
1067 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1068 .gpiomute = 0x40000,
1069 .needs_tvaudio = 1,
1070 .no_msp34xx = 1,
1071 .pll = PLL_35,
1072 .tuner_type = TUNER_PHILIPS_PAL_I,
1073 .tuner_addr = ADDR_UNSET,
1074 .has_radio = 1,
1075 },
1076
1077 /* ---- card 0x30 ---------------------------------- */
1078 [BTTV_BOARD_DYNALINK] = {
1079 .name = "Askey CPH03x/ Dynalink Magic TView",
1080 .video_inputs = 3,
1081 /* .audio_inputs= 1, */
1082 .svhs = 2,
1083 .gpiomask = 15,
1084 .muxsel = MUXSEL(2, 3, 1, 1),
1085 .gpiomux = {2,0,0,0 },
1086 .gpiomute = 1,
1087 .needs_tvaudio = 1,
1088 .pll = PLL_28,
1089 .tuner_type = UNSET,
1090 .tuner_addr = ADDR_UNSET,
1091 },
1092 [BTTV_BOARD_GVBCTV3PCI] = {
1093 .name = "IODATA GV-BCTV3/PCI",
1094 .video_inputs = 3,
1095 /* .audio_inputs= 1, */
1096 .svhs = 2,
1097 .gpiomask = 0x010f00,
1098 .muxsel = MUXSEL(2, 3, 0, 0),
1099 .gpiomux = {0x10000, 0, 0x10000, 0 },
1100 .no_msp34xx = 1,
1101 .pll = PLL_28,
1102 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1103 .tuner_addr = ADDR_UNSET,
1104 .audio_mode_gpio= gvbctv3pci_audio,
1105 },
1106 [BTTV_BOARD_PXELVWPLTVPAK] = {
1107 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1108 .video_inputs = 5,
1109 /* .audio_inputs= 1, */
1110 .svhs = 3,
1111 .has_dig_in = 1,
1112 .gpiomask = 0xAA0000,
1113 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1114 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1115 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1116 .gpiomute = 0xa8000,
1117 .no_msp34xx = 1,
1118 .pll = PLL_28,
1119 .tuner_type = TUNER_PHILIPS_PAL_I,
1120 .tuner_addr = ADDR_UNSET,
1121 .has_remote = 1,
1122 /* GPIO wiring: (different from Rev.4C !)
1123 GPIO17: U4.A0 (first hef4052bt)
1124 GPIO19: U4.A1
1125 GPIO20: U5.A1 (second hef4052bt)
1126 GPIO21: U4.nEN
1127 GPIO22: BT832 Reset Line
1128 GPIO23: A5,A0, U5,nEN
1129 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1130 */
1131 },
1132 [BTTV_BOARD_EAGLE] = {
1133 .name = "Eagle Wireless Capricorn2 (bt878A)",
1134 .video_inputs = 4,
1135 /* .audio_inputs= 1, */
1136 .svhs = 2,
1137 .gpiomask = 7,
1138 .muxsel = MUXSEL(2, 0, 1, 1),
1139 .gpiomux = { 0, 1, 2, 3 },
1140 .gpiomute = 4,
1141 .pll = PLL_28,
1142 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1143 .tuner_addr = ADDR_UNSET,
1144 },
1145
1146 /* ---- card 0x34 ---------------------------------- */
1147 [BTTV_BOARD_PINNACLEPRO] = {
1148 /* David Härdeman <david@2gen.com> */
1149 .name = "Pinnacle PCTV Studio Pro",
1150 .video_inputs = 4,
1151 /* .audio_inputs= 1, */
1152 .svhs = 3,
1153 .gpiomask = 0x03000F,
1154 .muxsel = MUXSEL(2, 3, 1, 1),
1155 .gpiomux = { 1, 0xd0001, 0, 0 },
1156 .gpiomute = 10,
1157 /* sound path (5 sources):
1158 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1159 0= ext. Audio IN
1160 1= from MUX2
1161 2= Mono TV sound from Tuner
1162 3= not connected
1163 MUX2 (mask 0x30000):
1164 0,2,3= from MSP34xx
1165 1= FM stereo Radio from Tuner */
1166 .needs_tvaudio = 0,
1167 .pll = PLL_28,
1168 .tuner_type = UNSET,
1169 .tuner_addr = ADDR_UNSET,
1170 },
1171 [BTTV_BOARD_TVIEW_RDS_FM] = {
1172 /* Claas Langbehn <claas@bigfoot.com>,
1173 Sven Grothklags <sven@upb.de> */
1174 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1175 .video_inputs = 4,
1176 /* .audio_inputs= 3, */
1177 .svhs = 2,
1178 .gpiomask = 0x1c,
1179 .muxsel = MUXSEL(2, 3, 1, 1),
1180 .gpiomux = { 0, 0, 0x10, 8 },
1181 .gpiomute = 4,
1182 .needs_tvaudio = 1,
1183 .pll = PLL_28,
1184 .tuner_type = TUNER_PHILIPS_PAL,
1185 .tuner_addr = ADDR_UNSET,
1186 .has_radio = 1,
1187 },
1188 [BTTV_BOARD_LIFETEC_9415] = {
1189 /* Tim Röstermundt <rosterm@uni-muenster.de>
1190 in de.comp.os.unix.linux.hardware:
1191 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1192 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1193 options tuner type=5 */
1194 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1195 .video_inputs = 4,
1196 /* .audio_inputs= 1, */
1197 .svhs = 2,
1198 .gpiomask = 0x18e0,
1199 .muxsel = MUXSEL(2, 3, 1, 1),
1200 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1201 .gpiomute = 0x18e0,
1202 /* For cards with tda9820/tda9821:
1203 0x0000: Tuner normal stereo
1204 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1205 0x0880: Tuner A2 stereo */
1206 .pll = PLL_28,
1207 .tuner_type = UNSET,
1208 .tuner_addr = ADDR_UNSET,
1209 },
1210 [BTTV_BOARD_BESTBUY_EASYTV] = {
1211 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1212 old Easy TV BT848 version (model CPH031) */
1213 .name = "Askey CPH031/ BESTBUY Easy TV",
1214 .video_inputs = 4,
1215 /* .audio_inputs= 1, */
1216 .svhs = 2,
1217 .gpiomask = 0xF,
1218 .muxsel = MUXSEL(2, 3, 1, 0),
1219 .gpiomux = { 2, 0, 0, 0 },
1220 .gpiomute = 10,
1221 .needs_tvaudio = 0,
1222 .pll = PLL_28,
1223 .tuner_type = TUNER_TEMIC_PAL,
1224 .tuner_addr = ADDR_UNSET,
1225 },
1226
1227 /* ---- card 0x38 ---------------------------------- */
1228 [BTTV_BOARD_FLYVIDEO_98FM] = {
1229 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1230 .name = "Lifeview FlyVideo 98FM LR50",
1231 .video_inputs = 4,
1232 /* .audio_inputs= 3, */
1233 .svhs = 2,
1234 .gpiomask = 0x1800,
1235 .muxsel = MUXSEL(2, 3, 1, 1),
1236 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1237 .gpiomute = 0x1800,
1238 .pll = PLL_28,
1239 .tuner_type = TUNER_PHILIPS_PAL,
1240 .tuner_addr = ADDR_UNSET,
1241 },
1242 /* This is the ultimate cheapo capture card
1243 * just a BT848A on a small PCB!
1244 * Steve Hosgood <steve@equiinet.com> */
1245 [BTTV_BOARD_GRANDTEC] = {
1246 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1247 .video_inputs = 2,
1248 /* .audio_inputs= 0, */
1249 .svhs = 1,
1250 .gpiomask = 0,
1251 .muxsel = MUXSEL(3, 1),
1252 .gpiomux = { 0 },
1253 .needs_tvaudio = 0,
1254 .no_msp34xx = 1,
1255 .pll = PLL_35,
1256 .tuner_type = TUNER_ABSENT,
1257 .tuner_addr = ADDR_UNSET,
1258 },
1259 [BTTV_BOARD_ASKEY_CPH060] = {
1260 /* Daniel Herrington <daniel.herrington@home.com> */
1261 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1262 .video_inputs = 3,
1263 /* .audio_inputs= 1, */
1264 .svhs = 2,
1265 .gpiomask = 0xe00,
1266 .muxsel = MUXSEL(2, 3, 1, 1),
1267 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1268 .gpiomute = 0x800,
1269 .needs_tvaudio = 1,
1270 .pll = PLL_28,
1271 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1272 .tuner_addr = ADDR_UNSET,
1273 },
1274 [BTTV_BOARD_ASKEY_CPH03X] = {
1275 /* Matti Mottus <mottus@physic.ut.ee> */
1276 .name = "Askey CPH03x TV Capturer",
1277 .video_inputs = 4,
1278 /* .audio_inputs= 1, */
1279 .svhs = 2,
1280 .gpiomask = 0x03000F,
1281 .muxsel = MUXSEL(2, 3, 1, 0),
1282 .gpiomux = { 2, 0, 0, 0 },
1283 .gpiomute = 1,
1284 .pll = PLL_28,
1285 .tuner_type = TUNER_TEMIC_PAL,
1286 .tuner_addr = ADDR_UNSET,
1287 .has_remote = 1,
1288 },
1289
1290 /* ---- card 0x3c ---------------------------------- */
1291 [BTTV_BOARD_MM100PCTV] = {
1292 /* Philip Blundell <philb@gnu.org> */
1293 .name = "Modular Technology MM100PCTV",
1294 .video_inputs = 2,
1295 /* .audio_inputs= 2, */
1296 .svhs = NO_SVHS,
1297 .gpiomask = 11,
1298 .muxsel = MUXSEL(2, 3, 1, 1),
1299 .gpiomux = { 2, 0, 0, 1 },
1300 .gpiomute = 8,
1301 .pll = PLL_35,
1302 .tuner_type = TUNER_TEMIC_PAL,
1303 .tuner_addr = ADDR_UNSET,
1304 },
1305 [BTTV_BOARD_GMV1] = {
1306 /* Adrian Cox <adrian@humboldt.co.uk */
1307 .name = "AG Electronics GMV1",
1308 .video_inputs = 2,
1309 /* .audio_inputs= 0, */
1310 .svhs = 1,
1311 .gpiomask = 0xF,
1312 .muxsel = MUXSEL(2, 2),
1313 .gpiomux = { },
1314 .no_msp34xx = 1,
1315 .needs_tvaudio = 0,
1316 .pll = PLL_28,
1317 .tuner_type = TUNER_ABSENT,
1318 .tuner_addr = ADDR_UNSET,
1319 },
1320 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1321 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1322 new Easy TV BT878 version (model CPH061)
1323 special thanks to Informatica Mieres for providing the card */
1324 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1325 .video_inputs = 3,
1326 /* .audio_inputs= 2, */
1327 .svhs = 2,
1328 .gpiomask = 0xFF,
1329 .muxsel = MUXSEL(2, 3, 1, 0),
1330 .gpiomux = { 1, 0, 4, 4 },
1331 .gpiomute = 9,
1332 .needs_tvaudio = 0,
1333 .pll = PLL_28,
1334 .tuner_type = TUNER_PHILIPS_PAL,
1335 .tuner_addr = ADDR_UNSET,
1336 },
1337 [BTTV_BOARD_ATI_TVWONDER] = {
1338 /* Lukas Gebauer <geby@volny.cz> */
1339 .name = "ATI TV-Wonder",
1340 .video_inputs = 3,
1341 /* .audio_inputs= 1, */
1342 .svhs = 2,
1343 .gpiomask = 0xf03f,
1344 .muxsel = MUXSEL(2, 3, 1, 0),
1345 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1346 .gpiomute = 0xbffe,
1347 .pll = PLL_28,
1348 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1349 .tuner_addr = ADDR_UNSET,
1350 },
1351
1352 /* ---- card 0x40 ---------------------------------- */
1353 [BTTV_BOARD_ATI_TVWONDERVE] = {
1354 /* Lukas Gebauer <geby@volny.cz> */
1355 .name = "ATI TV-Wonder VE",
1356 .video_inputs = 2,
1357 /* .audio_inputs= 1, */
1358 .svhs = NO_SVHS,
1359 .gpiomask = 1,
1360 .muxsel = MUXSEL(2, 3, 0, 1),
1361 .gpiomux = { 0, 0, 1, 0 },
1362 .no_msp34xx = 1,
1363 .pll = PLL_28,
1364 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1365 .tuner_addr = ADDR_UNSET,
1366 },
1367 [BTTV_BOARD_FLYVIDEO2000] = {
1368 /* DeeJay <deejay@westel900.net (2000S) */
1369 .name = "Lifeview FlyVideo 2000S LR90",
1370 .video_inputs = 3,
1371 /* .audio_inputs= 3, */
1372 .svhs = 2,
1373 .gpiomask = 0x18e0,
1374 .muxsel = MUXSEL(2, 3, 0, 1),
1375 /* Radio changed from 1e80 to 0x800 to make
1376 FlyVideo2000S in .hu happy (gm)*/
1377 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1378 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1379 .gpiomute = 0x1800,
1380 .audio_mode_gpio= fv2000s_audio,
1381 .no_msp34xx = 1,
1382 .needs_tvaudio = 1,
1383 .pll = PLL_28,
1384 .tuner_type = TUNER_PHILIPS_PAL,
1385 .tuner_addr = ADDR_UNSET,
1386 },
1387 [BTTV_BOARD_TERRATVALUER] = {
1388 .name = "Terratec TValueRadio",
1389 .video_inputs = 3,
1390 /* .audio_inputs= 1, */
1391 .svhs = 2,
1392 .gpiomask = 0xffff00,
1393 .muxsel = MUXSEL(2, 3, 1, 1),
1394 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1395 .gpiomute = 0x900,
1396 .needs_tvaudio = 1,
1397 .pll = PLL_28,
1398 .tuner_type = TUNER_PHILIPS_PAL,
1399 .tuner_addr = ADDR_UNSET,
1400 .has_radio = 1,
1401 },
1402 [BTTV_BOARD_GVBCTV4PCI] = {
1403 /* TANAKA Kei <peg00625@nifty.com> */
1404 .name = "IODATA GV-BCTV4/PCI",
1405 .video_inputs = 3,
1406 /* .audio_inputs= 1, */
1407 .svhs = 2,
1408 .gpiomask = 0x010f00,
1409 .muxsel = MUXSEL(2, 3, 0, 0),
1410 .gpiomux = {0x10000, 0, 0x10000, 0 },
1411 .no_msp34xx = 1,
1412 .pll = PLL_28,
1413 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1414 .tuner_addr = ADDR_UNSET,
1415 .audio_mode_gpio= gvbctv3pci_audio,
1416 },
1417
1418 /* ---- card 0x44 ---------------------------------- */
1419 [BTTV_BOARD_VOODOOTV_FM] = {
1420 .name = "3Dfx VoodooTV FM (Euro)",
1421 /* try "insmod msp3400 simple=0" if you have
1422 * sound problems with this card. */
1423 .video_inputs = 4,
1424 /* .audio_inputs= 1, */
1425 .svhs = NO_SVHS,
1426 .gpiomask = 0x4f8a00,
1427 /* 0x100000: 1=MSP enabled (0=disable again)
1428 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1429 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1430 .gpiomute = 0x947fff,
1431 /* tvtuner, radio, external,internal, mute, stereo
1432 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1433 .muxsel = MUXSEL(2, 3, 0, 1),
1434 .tuner_type = TUNER_MT2032,
1435 .tuner_addr = ADDR_UNSET,
1436 .pll = PLL_28,
1437 .has_radio = 1,
1438 },
1439 [BTTV_BOARD_VOODOOTV_200] = {
1440 .name = "VoodooTV 200 (USA)",
1441 /* try "insmod msp3400 simple=0" if you have
1442 * sound problems with this card. */
1443 .video_inputs = 4,
1444 /* .audio_inputs= 1, */
1445 .svhs = NO_SVHS,
1446 .gpiomask = 0x4f8a00,
1447 /* 0x100000: 1=MSP enabled (0=disable again)
1448 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1449 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1450 .gpiomute = 0x947fff,
1451 /* tvtuner, radio, external,internal, mute, stereo
1452 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1453 .muxsel = MUXSEL(2, 3, 0, 1),
1454 .tuner_type = TUNER_MT2032,
1455 .tuner_addr = ADDR_UNSET,
1456 .pll = PLL_28,
1457 .has_radio = 1,
1458 },
1459 [BTTV_BOARD_AIMMS] = {
1460 /* Philip Blundell <pb@nexus.co.uk> */
1461 .name = "Active Imaging AIMMS",
1462 .video_inputs = 1,
1463 /* .audio_inputs= 0, */
1464 .tuner_type = TUNER_ABSENT,
1465 .tuner_addr = ADDR_UNSET,
1466 .pll = PLL_28,
1467 .muxsel = MUXSEL(2),
1468 .gpiomask = 0
1469 },
1470 [BTTV_BOARD_PV_BT878P_PLUS] = {
1471 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1472 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1473 .video_inputs = 3,
1474 /* .audio_inputs= 4, */
1475 .svhs = 2,
1476 .gpiomask = 15,
1477 .muxsel = MUXSEL(2, 3, 1, 1),
1478 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1479 .gpiomute = 13,
1480 .needs_tvaudio = 1,
1481 .pll = PLL_28,
1482 .tuner_type = TUNER_LG_PAL_I_FM,
1483 .tuner_addr = ADDR_UNSET,
1484 .has_remote = 1,
1485 /* GPIO wiring:
1486 GPIO0: U4.A0 (hef4052bt)
1487 GPIO1: U4.A1
1488 GPIO2: U4.A1 (second hef4052bt)
1489 GPIO3: U4.nEN, U5.A0, A5.nEN
1490 GPIO8-15: vrd866b ?
1491 */
1492 },
1493 [BTTV_BOARD_FLYVIDEO98EZ] = {
1494 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1495 .video_inputs = 4,
1496 /* .audio_inputs= 0, */
1497 .svhs = 2,
1498 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1499 .muxsel = MUXSEL(2, 3, 1, 1),
1500 .pll = PLL_28,
1501 .no_msp34xx = 1,
1502 .tuner_type = TUNER_ABSENT,
1503 .tuner_addr = ADDR_UNSET,
1504 },
1505
1506 /* ---- card 0x48 ---------------------------------- */
1507 [BTTV_BOARD_PV_BT878P_9B] = {
1508 /* Dariusz Kowalewski <darekk@automex.pl> */
1509 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1510 .video_inputs = 4,
1511 /* .audio_inputs= 1, */
1512 .svhs = 2,
1513 .gpiomask = 0x3f,
1514 .muxsel = MUXSEL(2, 3, 1, 1),
1515 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1516 .gpiomute = 0x09,
1517 .needs_tvaudio = 1,
1518 .no_msp34xx = 1,
1519 .pll = PLL_28,
1520 .tuner_type = TUNER_PHILIPS_PAL,
1521 .tuner_addr = ADDR_UNSET,
1522 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1523 .has_radio = 1, /* Note: not all cards have radio */
1524 .has_remote = 1,
1525 /* GPIO wiring:
1526 GPIO0: A0 hef4052
1527 GPIO1: A1 hef4052
1528 GPIO3: nEN hef4052
1529 GPIO8-15: vrd866b
1530 GPIO20,22,23: R30,R29,R28
1531 */
1532 },
1533 [BTTV_BOARD_SENSORAY311_611] = {
1534 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1535 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1536 .name = "Sensoray 311/611",
1537 .video_inputs = 5,
1538 /* .audio_inputs= 0, */
1539 .svhs = 4,
1540 .gpiomask = 0,
1541 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1542 .gpiomux = { 0 },
1543 .needs_tvaudio = 0,
1544 .tuner_type = TUNER_ABSENT,
1545 .tuner_addr = ADDR_UNSET,
1546 },
1547 [BTTV_BOARD_RV605] = {
1548 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1549 .name = "RemoteVision MX (RV605)",
1550 .video_inputs = 16,
1551 /* .audio_inputs= 0, */
1552 .svhs = NO_SVHS,
1553 .gpiomask = 0x00,
1554 .gpiomask2 = 0x07ff,
1555 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1556 .no_msp34xx = 1,
1557 .tuner_type = TUNER_ABSENT,
1558 .tuner_addr = ADDR_UNSET,
1559 .muxsel_hook = rv605_muxsel,
1560 },
1561 [BTTV_BOARD_POWERCLR_MTV878] = {
1562 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1563 .video_inputs = 3,
1564 /* .audio_inputs= 2, */
1565 .svhs = 2,
1566 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1567 .muxsel = MUXSEL(2, 1, 1),
1568 .gpiomux = { 0, 1, 2, 2 },
1569 .gpiomute = 4,
1570 .needs_tvaudio = 0,
1571 .tuner_type = TUNER_PHILIPS_PAL,
1572 .tuner_addr = ADDR_UNSET,
1573 .pll = PLL_28,
1574 .has_radio = 1,
1575 },
1576
1577 /* ---- card 0x4c ---------------------------------- */
1578 [BTTV_BOARD_WINDVR] = {
1579 /* Masaki Suzuki <masaki@btree.org> */
1580 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1581 .video_inputs = 3,
1582 /* .audio_inputs= 1, */
1583 .svhs = 2,
1584 .gpiomask = 0x140007,
1585 .muxsel = MUXSEL(2, 3, 1, 1),
1586 .gpiomux = { 0, 1, 2, 3 },
1587 .gpiomute = 4,
1588 .tuner_type = TUNER_PHILIPS_NTSC,
1589 .tuner_addr = ADDR_UNSET,
1590 .audio_mode_gpio= windvr_audio,
1591 },
1592 [BTTV_BOARD_GRANDTEC_MULTI] = {
1593 .name = "GrandTec Multi Capture Card (Bt878)",
1594 .video_inputs = 4,
1595 /* .audio_inputs= 0, */
1596 .svhs = NO_SVHS,
1597 .gpiomask = 0,
1598 .muxsel = MUXSEL(2, 3, 1, 0),
1599 .gpiomux = { 0 },
1600 .needs_tvaudio = 0,
1601 .no_msp34xx = 1,
1602 .pll = PLL_28,
1603 .tuner_type = TUNER_ABSENT,
1604 .tuner_addr = ADDR_UNSET,
1605 },
1606 [BTTV_BOARD_KWORLD] = {
1607 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1608 .video_inputs = 4,
1609 /* .audio_inputs= 3, */
1610 .svhs = 2,
1611 .gpiomask = 7,
1612 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1613 .muxsel = MUXSEL(2, 3, 1, 1),
1614 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1615 * This card lacks external Audio In, so we mute it on Ext. & Int.
1616 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1617 * This card lacks PCI subsystem ID, sigh.
1618 * gpiomux =1: lower volume, 2+3: mute
1619 * btwincap uses 0x80000/0x80003
1620 */
1621 .gpiomute = 4,
1622 .needs_tvaudio = 0,
1623 .no_msp34xx = 1,
1624 .pll = PLL_28,
1625 .tuner_type = TUNER_PHILIPS_PAL,
1626 .tuner_addr = ADDR_UNSET,
1627 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1628 radio signal strength indicators work fine. */
1629 .has_radio = 1,
1630 /* GPIO Info:
1631 GPIO0,1: HEF4052 A0,A1
1632 GPIO2: HEF4052 nENABLE
1633 GPIO3-7: n.c.
1634 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1635 GPIO14,15: ??
1636 GPIO16-21: n.c.
1637 GPIO22,23: ??
1638 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1639 },
1640 [BTTV_BOARD_DSP_TCVIDEO] = {
1641 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1642 .name = "DSP Design TCVIDEO",
1643 .video_inputs = 4,
1644 .svhs = NO_SVHS,
1645 .muxsel = MUXSEL(2, 3, 1, 0),
1646 .pll = PLL_28,
1647 .tuner_type = UNSET,
1648 .tuner_addr = ADDR_UNSET,
1649 },
1650
1651 /* ---- card 0x50 ---------------------------------- */
1652 [BTTV_BOARD_HAUPPAUGEPVR] = {
1653 .name = "Hauppauge WinTV PVR",
1654 .video_inputs = 4,
1655 /* .audio_inputs= 1, */
1656 .svhs = 2,
1657 .muxsel = MUXSEL(2, 0, 1, 1),
1658 .needs_tvaudio = 1,
1659 .pll = PLL_28,
1660 .tuner_type = UNSET,
1661 .tuner_addr = ADDR_UNSET,
1662
1663 .gpiomask = 7,
1664 .gpiomux = {7},
1665 },
1666 [BTTV_BOARD_GVBCTV5PCI] = {
1667 .name = "IODATA GV-BCTV5/PCI",
1668 .video_inputs = 3,
1669 /* .audio_inputs= 1, */
1670 .svhs = 2,
1671 .gpiomask = 0x0f0f80,
1672 .muxsel = MUXSEL(2, 3, 1, 0),
1673 .gpiomux = {0x030000, 0x010000, 0, 0 },
1674 .gpiomute = 0x020000,
1675 .no_msp34xx = 1,
1676 .pll = PLL_28,
1677 .tuner_type = TUNER_PHILIPS_NTSC_M,
1678 .tuner_addr = ADDR_UNSET,
1679 .audio_mode_gpio= gvbctv5pci_audio,
1680 .has_radio = 1,
1681 },
1682 [BTTV_BOARD_OSPREY1x0] = {
1683 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1684 .video_inputs = 4, /* id-inputs-clock */
1685 /* .audio_inputs= 0, */
1686 .svhs = 3,
1687 .muxsel = MUXSEL(3, 2, 0, 1),
1688 .pll = PLL_28,
1689 .tuner_type = TUNER_ABSENT,
1690 .tuner_addr = ADDR_UNSET,
1691 .no_msp34xx = 1,
1692 .no_tda7432 = 1,
1693 },
1694 [BTTV_BOARD_OSPREY1x0_848] = {
1695 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1696 .video_inputs = 3,
1697 /* .audio_inputs= 0, */
1698 .svhs = 2,
1699 .muxsel = MUXSEL(2, 3, 1),
1700 .pll = PLL_28,
1701 .tuner_type = TUNER_ABSENT,
1702 .tuner_addr = ADDR_UNSET,
1703 .no_msp34xx = 1,
1704 .no_tda7432 = 1,
1705 },
1706
1707 /* ---- card 0x54 ---------------------------------- */
1708 [BTTV_BOARD_OSPREY101_848] = {
1709 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1710 .video_inputs = 2,
1711 /* .audio_inputs= 0, */
1712 .svhs = 1,
1713 .muxsel = MUXSEL(3, 1),
1714 .pll = PLL_28,
1715 .tuner_type = TUNER_ABSENT,
1716 .tuner_addr = ADDR_UNSET,
1717 .no_msp34xx = 1,
1718 .no_tda7432 = 1,
1719 },
1720 [BTTV_BOARD_OSPREY1x1] = {
1721 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1722 .video_inputs = 1,
1723 /* .audio_inputs= 0, */
1724 .svhs = NO_SVHS,
1725 .muxsel = MUXSEL(0),
1726 .pll = PLL_28,
1727 .tuner_type = TUNER_ABSENT,
1728 .tuner_addr = ADDR_UNSET,
1729 .no_msp34xx = 1,
1730 .no_tda7432 = 1,
1731 },
1732 [BTTV_BOARD_OSPREY1x1_SVID] = {
1733 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1734 .video_inputs = 2,
1735 /* .audio_inputs= 0, */
1736 .svhs = 1,
1737 .muxsel = MUXSEL(0, 1),
1738 .pll = PLL_28,
1739 .tuner_type = TUNER_ABSENT,
1740 .tuner_addr = ADDR_UNSET,
1741 .no_msp34xx = 1,
1742 .no_tda7432 = 1,
1743 },
1744 [BTTV_BOARD_OSPREY2xx] = {
1745 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1746 .video_inputs = 1,
1747 /* .audio_inputs= 1, */
1748 .svhs = NO_SVHS,
1749 .muxsel = MUXSEL(0),
1750 .pll = PLL_28,
1751 .tuner_type = TUNER_ABSENT,
1752 .tuner_addr = ADDR_UNSET,
1753 .no_msp34xx = 1,
1754 .no_tda7432 = 1,
1755 },
1756
1757 /* ---- card 0x58 ---------------------------------- */
1758 [BTTV_BOARD_OSPREY2x0_SVID] = {
1759 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1760 .video_inputs = 2,
1761 /* .audio_inputs= 1, */
1762 .svhs = 1,
1763 .muxsel = MUXSEL(0, 1),
1764 .pll = PLL_28,
1765 .tuner_type = TUNER_ABSENT,
1766 .tuner_addr = ADDR_UNSET,
1767 .no_msp34xx = 1,
1768 .no_tda7432 = 1,
1769 },
1770 [BTTV_BOARD_OSPREY2x0] = {
1771 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1772 .video_inputs = 2,
1773 /* .audio_inputs= 1, */
1774 .svhs = 1,
1775 .muxsel = MUXSEL(2, 3),
1776 .pll = PLL_28,
1777 .tuner_type = TUNER_ABSENT,
1778 .tuner_addr = ADDR_UNSET,
1779 .no_msp34xx = 1,
1780 .no_tda7432 = 1,
1781 },
1782 [BTTV_BOARD_OSPREY500] = {
1783 .name = "Osprey 500", /* 500 */
1784 .video_inputs = 2,
1785 /* .audio_inputs= 1, */
1786 .svhs = 1,
1787 .muxsel = MUXSEL(2, 3),
1788 .pll = PLL_28,
1789 .tuner_type = TUNER_ABSENT,
1790 .tuner_addr = ADDR_UNSET,
1791 .no_msp34xx = 1,
1792 .no_tda7432 = 1,
1793 },
1794 [BTTV_BOARD_OSPREY540] = {
1795 .name = "Osprey 540", /* 540 */
1796 .video_inputs = 4,
1797 /* .audio_inputs= 1, */
1798 .pll = PLL_28,
1799 .tuner_type = TUNER_ABSENT,
1800 .tuner_addr = ADDR_UNSET,
1801 .no_msp34xx = 1,
1802 .no_tda7432 = 1,
1803 },
1804
1805 /* ---- card 0x5C ---------------------------------- */
1806 [BTTV_BOARD_OSPREY2000] = {
1807 .name = "Osprey 2000", /* 2000 */
1808 .video_inputs = 2,
1809 /* .audio_inputs= 1, */
1810 .svhs = 1,
1811 .muxsel = MUXSEL(2, 3),
1812 .pll = PLL_28,
1813 .tuner_type = TUNER_ABSENT,
1814 .tuner_addr = ADDR_UNSET,
1815 .no_msp34xx = 1,
1816 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1817 },
1818 [BTTV_BOARD_IDS_EAGLE] = {
1819 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1820 .name = "IDS Eagle",
1821 .video_inputs = 4,
1822 /* .audio_inputs= 0, */
1823 .tuner_type = TUNER_ABSENT,
1824 .tuner_addr = ADDR_UNSET,
1825 .svhs = NO_SVHS,
1826 .gpiomask = 0,
1827 .muxsel = MUXSEL(2, 2, 2, 2),
1828 .muxsel_hook = eagle_muxsel,
1829 .no_msp34xx = 1,
1830 .pll = PLL_28,
1831 },
1832 [BTTV_BOARD_PINNACLESAT] = {
1833 .name = "Pinnacle PCTV Sat",
1834 .video_inputs = 2,
1835 /* .audio_inputs= 0, */
1836 .svhs = 1,
1837 .tuner_type = TUNER_ABSENT,
1838 .tuner_addr = ADDR_UNSET,
1839 .no_msp34xx = 1,
1840 .no_tda7432 = 1,
1841 .muxsel = MUXSEL(3, 1),
1842 .pll = PLL_28,
1843 .no_gpioirq = 1,
1844 .has_dvb = 1,
1845 },
1846 [BTTV_BOARD_FORMAC_PROTV] = {
1847 .name = "Formac ProTV II (bt878)",
1848 .video_inputs = 4,
1849 /* .audio_inputs= 1, */
1850 .svhs = 3,
1851 .gpiomask = 2,
1852 /* TV, Comp1, Composite over SVID con, SVID */
1853 .muxsel = MUXSEL(2, 3, 1, 1),
1854 .gpiomux = { 2, 2, 0, 0 },
1855 .pll = PLL_28,
1856 .has_radio = 1,
1857 .tuner_type = TUNER_PHILIPS_PAL,
1858 .tuner_addr = ADDR_UNSET,
1859 /* sound routing:
1860 GPIO=0x00,0x01,0x03: mute (?)
1861 0x02: both TV and radio (tuner: FM1216/I)
1862 The card has onboard audio connectors labeled "cdrom" and "board",
1863 not soldered here, though unknown wiring.
1864 Card lacks: external audio in, pci subsystem id.
1865 */
1866 },
1867
1868 /* ---- card 0x60 ---------------------------------- */
1869 [BTTV_BOARD_MACHTV] = {
1870 .name = "MachTV",
1871 .video_inputs = 3,
1872 /* .audio_inputs= 1, */
1873 .svhs = NO_SVHS,
1874 .gpiomask = 7,
1875 .muxsel = MUXSEL(2, 3, 1, 1),
1876 .gpiomux = { 0, 1, 2, 3},
1877 .gpiomute = 4,
1878 .needs_tvaudio = 1,
1879 .tuner_type = TUNER_PHILIPS_PAL,
1880 .tuner_addr = ADDR_UNSET,
1881 .pll = PLL_28,
1882 },
1883 [BTTV_BOARD_EURESYS_PICOLO] = {
1884 .name = "Euresys Picolo",
1885 .video_inputs = 3,
1886 /* .audio_inputs= 0, */
1887 .svhs = 2,
1888 .gpiomask = 0,
1889 .no_msp34xx = 1,
1890 .no_tda7432 = 1,
1891 .muxsel = MUXSEL(2, 0, 1),
1892 .pll = PLL_28,
1893 .tuner_type = TUNER_ABSENT,
1894 .tuner_addr = ADDR_UNSET,
1895 },
1896 [BTTV_BOARD_PV150] = {
1897 /* Luc Van Hoeylandt <luc@e-magic.be> */
1898 .name = "ProVideo PV150", /* 0x4f */
1899 .video_inputs = 2,
1900 /* .audio_inputs= 0, */
1901 .svhs = NO_SVHS,
1902 .gpiomask = 0,
1903 .muxsel = MUXSEL(2, 3),
1904 .gpiomux = { 0 },
1905 .needs_tvaudio = 0,
1906 .no_msp34xx = 1,
1907 .pll = PLL_28,
1908 .tuner_type = TUNER_ABSENT,
1909 .tuner_addr = ADDR_UNSET,
1910 },
1911 [BTTV_BOARD_AD_TVK503] = {
1912 /* Hiroshi Takekawa <sian@big.or.jp> */
1913 /* This card lacks subsystem ID */
1914 .name = "AD-TVK503", /* 0x63 */
1915 .video_inputs = 4,
1916 /* .audio_inputs= 1, */
1917 .svhs = 2,
1918 .gpiomask = 0x001e8007,
1919 .muxsel = MUXSEL(2, 3, 1, 0),
1920 /* Tuner, Radio, external, internal, off, on */
1921 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1922 .gpiomute = 0x0f,
1923 .needs_tvaudio = 0,
1924 .no_msp34xx = 1,
1925 .pll = PLL_28,
1926 .tuner_type = TUNER_PHILIPS_NTSC,
1927 .tuner_addr = ADDR_UNSET,
1928 .audio_mode_gpio= adtvk503_audio,
1929 },
1930
1931 /* ---- card 0x64 ---------------------------------- */
1932 [BTTV_BOARD_HERCULES_SM_TV] = {
1933 .name = "Hercules Smart TV Stereo",
1934 .video_inputs = 4,
1935 /* .audio_inputs= 1, */
1936 .svhs = 2,
1937 .gpiomask = 0x00,
1938 .muxsel = MUXSEL(2, 3, 1, 1),
1939 .needs_tvaudio = 1,
1940 .no_msp34xx = 1,
1941 .pll = PLL_28,
1942 .tuner_type = TUNER_PHILIPS_PAL,
1943 .tuner_addr = ADDR_UNSET,
1944 /* Notes:
1945 - card lacks subsystem ID
1946 - stereo variant w/ daughter board with tda9874a @0xb0
1947 - Audio Routing:
1948 always from tda9874 independent of GPIO (?)
1949 external line in: unknown
1950 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1951 hef4053 (instead 4052) for unknown function
1952 */
1953 },
1954 [BTTV_BOARD_PACETV] = {
1955 .name = "Pace TV & Radio Card",
1956 .video_inputs = 4,
1957 /* .audio_inputs= 1, */
1958 .svhs = 2,
1959 /* Tuner, CVid, SVid, CVid over SVid connector */
1960 .muxsel = MUXSEL(2, 3, 1, 1),
1961 .gpiomask = 0,
1962 .no_tda7432 = 1,
1963 .tuner_type = TUNER_PHILIPS_PAL_I,
1964 .tuner_addr = ADDR_UNSET,
1965 .has_radio = 1,
1966 .pll = PLL_28,
1967 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1968 only internal line out: (4pin header) RGGL
1969 Radio must be decoded by msp3410d (not routed through)*/
1970 /*
1971 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1972 */
1973 },
1974 [BTTV_BOARD_IVC200] = {
1975 /* Chris Willing <chris@vislab.usyd.edu.au> */
1976 .name = "IVC-200",
1977 .video_inputs = 1,
1978 /* .audio_inputs= 0, */
1979 .tuner_type = TUNER_ABSENT,
1980 .tuner_addr = ADDR_UNSET,
1981 .svhs = NO_SVHS,
1982 .gpiomask = 0xdf,
1983 .muxsel = MUXSEL(2),
1984 .pll = PLL_28,
1985 },
1986 [BTTV_BOARD_IVCE8784] = {
1987 .name = "IVCE-8784",
1988 .video_inputs = 1,
1989 /* .audio_inputs= 0, */
1990 .tuner_type = TUNER_ABSENT,
1991 .tuner_addr = ADDR_UNSET,
1992 .svhs = NO_SVHS,
1993 .gpiomask = 0xdf,
1994 .muxsel = MUXSEL(2),
1995 .pll = PLL_28,
1996 },
1997 [BTTV_BOARD_XGUARD] = {
1998 .name = "Grand X-Guard / Trust 814PCI",
1999 .video_inputs = 16,
2000 /* .audio_inputs= 0, */
2001 .svhs = NO_SVHS,
2002 .tuner_type = TUNER_ABSENT,
2003 .tuner_addr = ADDR_UNSET,
2004 .gpiomask2 = 0xff,
2005 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2006 .muxsel_hook = xguard_muxsel,
2007 .no_msp34xx = 1,
2008 .no_tda7432 = 1,
2009 .pll = PLL_28,
2010 },
2011
2012 /* ---- card 0x68 ---------------------------------- */
2013 [BTTV_BOARD_NEBULA_DIGITV] = {
2014 .name = "Nebula Electronics DigiTV",
2015 .video_inputs = 1,
2016 .svhs = NO_SVHS,
2017 .muxsel = MUXSEL(2, 3, 1, 0),
2018 .no_msp34xx = 1,
2019 .no_tda7432 = 1,
2020 .pll = PLL_28,
2021 .tuner_type = TUNER_ABSENT,
2022 .tuner_addr = ADDR_UNSET,
2023 .has_dvb = 1,
2024 .has_remote = 1,
2025 .gpiomask = 0x1b,
2026 .no_gpioirq = 1,
2027 },
2028 [BTTV_BOARD_PV143] = {
2029 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2030 .name = "ProVideo PV143",
2031 .video_inputs = 4,
2032 /* .audio_inputs= 0, */
2033 .svhs = NO_SVHS,
2034 .gpiomask = 0,
2035 .muxsel = MUXSEL(2, 3, 1, 0),
2036 .gpiomux = { 0 },
2037 .needs_tvaudio = 0,
2038 .no_msp34xx = 1,
2039 .pll = PLL_28,
2040 .tuner_type = TUNER_ABSENT,
2041 .tuner_addr = ADDR_UNSET,
2042 },
2043 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2044 /* M.Klahr@phytec.de */
2045 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2046 .video_inputs = 4,
2047 /* .audio_inputs= 0, */
2048 .svhs = 3,
2049 .gpiomask = 0x00,
2050 .muxsel = MUXSEL(2, 3, 1, 0),
2051 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2052 .needs_tvaudio = 0,
2053 .pll = PLL_28,
2054 .tuner_type = TUNER_ABSENT,
2055 .tuner_addr = ADDR_UNSET,
2056 },
2057 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2058 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2059 .video_inputs = 4,
2060 /* .audio_inputs= 0, */
2061 .svhs = 3,
2062 .gpiomask = 0x00,
2063 .muxsel = MUXSEL(2, 3, 1, 1),
2064 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2065 .needs_tvaudio = 0,
2066 .pll = PLL_28,
2067 .tuner_type = TUNER_ABSENT,
2068 .tuner_addr = ADDR_UNSET,
2069 },
2070
2071 /* ---- card 0x6c ---------------------------------- */
2072 [BTTV_BOARD_VD009_MINIDIN] = {
2073 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2074 .video_inputs = 10,
2075 /* .audio_inputs= 0, */
2076 .svhs = 9,
2077 .gpiomask = 0x00,
2078 .gpiomask2 = 0x03, /* used for external vodeo mux */
2079 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2080 .muxsel_hook = phytec_muxsel,
2081 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2082 .needs_tvaudio = 1,
2083 .pll = PLL_28,
2084 .tuner_type = TUNER_ABSENT,
2085 .tuner_addr = ADDR_UNSET,
2086 },
2087 [BTTV_BOARD_VD009_COMBI] = {
2088 .name = "PHYTEC VD-009 Combi (bt878)",
2089 .video_inputs = 10,
2090 /* .audio_inputs= 0, */
2091 .svhs = 9,
2092 .gpiomask = 0x00,
2093 .gpiomask2 = 0x03, /* used for external vodeo mux */
2094 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2095 .muxsel_hook = phytec_muxsel,
2096 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2097 .needs_tvaudio = 1,
2098 .pll = PLL_28,
2099 .tuner_type = TUNER_ABSENT,
2100 .tuner_addr = ADDR_UNSET,
2101 },
2102 [BTTV_BOARD_IVC100] = {
2103 .name = "IVC-100",
2104 .video_inputs = 4,
2105 /* .audio_inputs= 0, */
2106 .tuner_type = TUNER_ABSENT,
2107 .tuner_addr = ADDR_UNSET,
2108 .svhs = NO_SVHS,
2109 .gpiomask = 0xdf,
2110 .muxsel = MUXSEL(2, 3, 1, 0),
2111 .pll = PLL_28,
2112 },
2113 [BTTV_BOARD_IVC120] = {
2114 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2115 .name = "IVC-120G",
2116 .video_inputs = 16,
2117 /* .audio_inputs= 0, */
2118 .tuner_type = TUNER_ABSENT,
2119 .tuner_addr = ADDR_UNSET,
2120 .svhs = NO_SVHS, /* card has no svhs */
2121 .needs_tvaudio = 0,
2122 .no_msp34xx = 1,
2123 .no_tda7432 = 1,
2124 .gpiomask = 0x00,
2125 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2126 .muxsel_hook = ivc120_muxsel,
2127 .pll = PLL_28,
2128 },
2129
2130 /* ---- card 0x70 ---------------------------------- */
2131 [BTTV_BOARD_PC_HDTV] = {
2132 .name = "pcHDTV HD-2000 TV",
2133 .video_inputs = 4,
2134 /* .audio_inputs= 1, */
2135 .svhs = 2,
2136 .muxsel = MUXSEL(2, 3, 1, 0),
2137 .tuner_type = TUNER_PHILIPS_FCV1236D,
2138 .tuner_addr = ADDR_UNSET,
2139 .has_dvb = 1,
2140 },
2141 [BTTV_BOARD_TWINHAN_DST] = {
2142 .name = "Twinhan DST + clones",
2143 .no_msp34xx = 1,
2144 .no_tda7432 = 1,
2145 .tuner_type = TUNER_ABSENT,
2146 .tuner_addr = ADDR_UNSET,
2147 .no_video = 1,
2148 .has_dvb = 1,
2149 },
2150 [BTTV_BOARD_WINFASTVC100] = {
2151 .name = "Winfast VC100",
2152 .video_inputs = 3,
2153 /* .audio_inputs= 0, */
2154 .svhs = 1,
2155 /* Vid In, SVid In, Vid over SVid in connector */
2156 .muxsel = MUXSEL(3, 1, 1, 3),
2157 .no_msp34xx = 1,
2158 .no_tda7432 = 1,
2159 .tuner_type = TUNER_ABSENT,
2160 .tuner_addr = ADDR_UNSET,
2161 .pll = PLL_28,
2162 },
2163 [BTTV_BOARD_TEV560] = {
2164 .name = "Teppro TEV-560/InterVision IV-560",
2165 .video_inputs = 3,
2166 /* .audio_inputs= 1, */
2167 .svhs = 2,
2168 .gpiomask = 3,
2169 .muxsel = MUXSEL(2, 3, 1, 1),
2170 .gpiomux = { 1, 1, 1, 1 },
2171 .needs_tvaudio = 1,
2172 .tuner_type = TUNER_PHILIPS_PAL,
2173 .tuner_addr = ADDR_UNSET,
2174 .pll = PLL_35,
2175 },
2176
2177 /* ---- card 0x74 ---------------------------------- */
2178 [BTTV_BOARD_SIMUS_GVC1100] = {
2179 .name = "SIMUS GVC1100",
2180 .video_inputs = 4,
2181 /* .audio_inputs= 0, */
2182 .svhs = NO_SVHS,
2183 .tuner_type = TUNER_ABSENT,
2184 .tuner_addr = ADDR_UNSET,
2185 .pll = PLL_28,
2186 .muxsel = MUXSEL(2, 2, 2, 2),
2187 .gpiomask = 0x3F,
2188 .muxsel_hook = gvc1100_muxsel,
2189 },
2190 [BTTV_BOARD_NGSTV_PLUS] = {
2191 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2192 .name = "NGS NGSTV+",
2193 .video_inputs = 3,
2194 .svhs = 2,
2195 .gpiomask = 0x008007,
2196 .muxsel = MUXSEL(2, 3, 0, 0),
2197 .gpiomux = { 0, 0, 0, 0 },
2198 .gpiomute = 0x000003,
2199 .pll = PLL_28,
2200 .tuner_type = TUNER_PHILIPS_PAL,
2201 .tuner_addr = ADDR_UNSET,
2202 .has_remote = 1,
2203 },
2204 [BTTV_BOARD_LMLBT4] = {
2205 /* http://linuxmedialabs.com */
2206 .name = "LMLBT4",
2207 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2208 /* .audio_inputs= 0, */
2209 .svhs = NO_SVHS,
2210 .muxsel = MUXSEL(2, 3, 1, 0),
2211 .no_msp34xx = 1,
2212 .no_tda7432 = 1,
2213 .needs_tvaudio = 0,
2214 .tuner_type = TUNER_ABSENT,
2215 .tuner_addr = ADDR_UNSET,
2216 },
2217 [BTTV_BOARD_TEKRAM_M205] = {
2218 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2219 .name = "Tekram M205 PRO",
2220 .video_inputs = 3,
2221 /* .audio_inputs= 1, */
2222 .tuner_type = TUNER_PHILIPS_PAL,
2223 .tuner_addr = ADDR_UNSET,
2224 .svhs = 2,
2225 .needs_tvaudio = 0,
2226 .gpiomask = 0x68,
2227 .muxsel = MUXSEL(2, 3, 1),
2228 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2229 .pll = PLL_28,
2230 },
2231
2232 /* ---- card 0x78 ---------------------------------- */
2233 [BTTV_BOARD_CONTVFMI] = {
2234 /* Javier Cendan Ares <jcendan@lycos.es> */
2235 /* bt878 TV + FM without subsystem ID */
2236 .name = "Conceptronic CONTVFMi",
2237 .video_inputs = 3,
2238 /* .audio_inputs= 1, */
2239 .svhs = 2,
2240 .gpiomask = 0x008007,
2241 .muxsel = MUXSEL(2, 3, 1, 1),
2242 .gpiomux = { 0, 1, 2, 2 },
2243 .gpiomute = 3,
2244 .needs_tvaudio = 0,
2245 .pll = PLL_28,
2246 .tuner_type = TUNER_PHILIPS_PAL,
2247 .tuner_addr = ADDR_UNSET,
2248 .has_remote = 1,
2249 .has_radio = 1,
2250 },
2251 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2252 /*Eric DEBIEF <debief@telemsa.com>*/
2253 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2254 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2255 /*0x79 in bttv.h*/
2256 .name = "Euresys Picolo Tetra",
2257 .video_inputs = 4,
2258 /* .audio_inputs= 0, */
2259 .svhs = NO_SVHS,
2260 .gpiomask = 0,
2261 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2262 .no_msp34xx = 1,
2263 .no_tda7432 = 1,
2264 /*878A input is always MUX0, see above.*/
2265 .muxsel = MUXSEL(2, 2, 2, 2),
2266 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2267 .pll = PLL_28,
2268 .needs_tvaudio = 0,
2269 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2270 .tuner_type = TUNER_ABSENT,
2271 .tuner_addr = ADDR_UNSET,
2272 },
2273 [BTTV_BOARD_SPIRIT_TV] = {
2274 /* Spirit TV Tuner from http://spiritmodems.com.au */
2275 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2276 .name = "Spirit TV Tuner",
2277 .video_inputs = 3,
2278 /* .audio_inputs= 1, */
2279 .svhs = 2,
2280 .gpiomask = 0x0000000f,
2281 .muxsel = MUXSEL(2, 1, 1),
2282 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2283 .tuner_type = TUNER_TEMIC_PAL,
2284 .tuner_addr = ADDR_UNSET,
2285 .no_msp34xx = 1,
2286 },
2287 [BTTV_BOARD_AVDVBT_771] = {
2288 /* Wolfram Joost <wojo@frokaschwei.de> */
2289 .name = "AVerMedia AVerTV DVB-T 771",
2290 .video_inputs = 2,
2291 .svhs = 1,
2292 .tuner_type = TUNER_ABSENT,
2293 .tuner_addr = ADDR_UNSET,
2294 .muxsel = MUXSEL(3, 3),
2295 .no_msp34xx = 1,
2296 .no_tda7432 = 1,
2297 .pll = PLL_28,
2298 .has_dvb = 1,
2299 .no_gpioirq = 1,
2300 .has_remote = 1,
2301 },
2302 /* ---- card 0x7c ---------------------------------- */
2303 [BTTV_BOARD_AVDVBT_761] = {
2304 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2305 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2306 .name = "AverMedia AverTV DVB-T 761",
2307 .video_inputs = 2,
2308 .svhs = 1,
2309 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2310 .no_msp34xx = 1,
2311 .no_tda7432 = 1,
2312 .pll = PLL_28,
2313 .tuner_type = TUNER_ABSENT,
2314 .tuner_addr = ADDR_UNSET,
2315 .has_dvb = 1,
2316 .no_gpioirq = 1,
2317 .has_remote = 1,
2318 },
2319 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2320 /* andre.schwarz@matrix-vision.de */
2321 .name = "MATRIX Vision Sigma-SQ",
2322 .video_inputs = 16,
2323 /* .audio_inputs= 0, */
2324 .svhs = NO_SVHS,
2325 .gpiomask = 0x0,
2326 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2327 .muxsel_hook = sigmaSQ_muxsel,
2328 .gpiomux = { 0 },
2329 .no_msp34xx = 1,
2330 .pll = PLL_28,
2331 .tuner_type = TUNER_ABSENT,
2332 .tuner_addr = ADDR_UNSET,
2333 },
2334 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2335 /* andre.schwarz@matrix-vision.de */
2336 .name = "MATRIX Vision Sigma-SLC",
2337 .video_inputs = 4,
2338 /* .audio_inputs= 0, */
2339 .svhs = NO_SVHS,
2340 .gpiomask = 0x0,
2341 .muxsel = MUXSEL(2, 2, 2, 2),
2342 .muxsel_hook = sigmaSLC_muxsel,
2343 .gpiomux = { 0 },
2344 .no_msp34xx = 1,
2345 .pll = PLL_28,
2346 .tuner_type = TUNER_ABSENT,
2347 .tuner_addr = ADDR_UNSET,
2348 },
2349 /* BTTV_BOARD_APAC_VIEWCOMP */
2350 [BTTV_BOARD_APAC_VIEWCOMP] = {
2351 /* Attila Kondoros <attila.kondoros@chello.hu> */
2352 /* bt878 TV + FM 0x00000000 subsystem ID */
2353 .name = "APAC Viewcomp 878(AMAX)",
2354 .video_inputs = 2,
2355 /* .audio_inputs= 1, */
2356 .svhs = NO_SVHS,
2357 .gpiomask = 0xFF,
2358 .muxsel = MUXSEL(2, 3, 1, 1),
2359 .gpiomux = { 2, 0, 0, 0 },
2360 .gpiomute = 10,
2361 .needs_tvaudio = 0,
2362 .pll = PLL_28,
2363 .tuner_type = TUNER_PHILIPS_PAL,
2364 .tuner_addr = ADDR_UNSET,
2365 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2366 .has_radio = 1, /* not every card has radio */
2367 },
2368
2369 /* ---- card 0x80 ---------------------------------- */
2370 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2371 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2372 .name = "DViCO FusionHDTV DVB-T Lite",
2373 .no_msp34xx = 1,
2374 .no_tda7432 = 1,
2375 .pll = PLL_28,
2376 .no_video = 1,
2377 .has_dvb = 1,
2378 .tuner_type = TUNER_ABSENT,
2379 .tuner_addr = ADDR_UNSET,
2380 },
2381 [BTTV_BOARD_VGEAR_MYVCD] = {
2382 /* Steven <photon38@pchome.com.tw> */
2383 .name = "V-Gear MyVCD",
2384 .video_inputs = 3,
2385 /* .audio_inputs= 1, */
2386 .svhs = 2,
2387 .gpiomask = 0x3f,
2388 .muxsel = MUXSEL(2, 3, 1, 0),
2389 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2390 .gpiomute = 0x31,
2391 .no_msp34xx = 1,
2392 .pll = PLL_28,
2393 .tuner_type = TUNER_PHILIPS_NTSC_M,
2394 .tuner_addr = ADDR_UNSET,
2395 .has_radio = 0,
2396 },
2397 [BTTV_BOARD_SUPER_TV] = {
2398 /* Rick C <cryptdragoon@gmail.com> */
2399 .name = "Super TV Tuner",
2400 .video_inputs = 4,
2401 /* .audio_inputs= 1, */
2402 .svhs = 2,
2403 .muxsel = MUXSEL(2, 3, 1, 0),
2404 .tuner_type = TUNER_PHILIPS_NTSC,
2405 .tuner_addr = ADDR_UNSET,
2406 .gpiomask = 0x008007,
2407 .gpiomux = { 0, 0x000001,0,0 },
2408 .needs_tvaudio = 1,
2409 .has_radio = 1,
2410 },
2411 [BTTV_BOARD_TIBET_CS16] = {
2412 /* Chris Fanning <video4linux@haydon.net> */
2413 .name = "Tibet Systems 'Progress DVR' CS16",
2414 .video_inputs = 16,
2415 /* .audio_inputs= 0, */
2416 .svhs = NO_SVHS,
2417 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2418 .pll = PLL_28,
2419 .no_msp34xx = 1,
2420 .no_tda7432 = 1,
2421 .tuner_type = TUNER_ABSENT,
2422 .tuner_addr = ADDR_UNSET,
2423 .muxsel_hook = tibetCS16_muxsel,
2424 },
2425 [BTTV_BOARD_KODICOM_4400R] = {
2426 /* Bill Brack <wbrack@mmm.com.hk> */
2427 /*
2428 * Note that, because of the card's wiring, the "master"
2429 * BT878A chip (i.e. the one which controls the analog switch
2430 * and must use this card type) is the 2nd one detected. The
2431 * other 3 chips should use card type 0x85, whose description
2432 * follows this one. There is a EEPROM on the card (which is
2433 * connected to the I2C of one of those other chips), but is
2434 * not currently handled. There is also a facility for a
2435 * "monitor", which is also not currently implemented.
2436 */
2437 .name = "Kodicom 4400R (master)",
2438 .video_inputs = 16,
2439 /* .audio_inputs= 0, */
2440 .tuner_type = TUNER_ABSENT,
2441 .tuner_addr = ADDR_UNSET,
2442 .svhs = NO_SVHS,
2443 /* GPIO bits 0-9 used for analog switch:
2444 * 00 - 03: camera selector
2445 * 04 - 06: channel (controller) selector
2446 * 07: data (1->on, 0->off)
2447 * 08: strobe
2448 * 09: reset
2449 * bit 16 is input from sync separator for the channel
2450 */
2451 .gpiomask = 0x0003ff,
2452 .no_gpioirq = 1,
2453 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2454 .pll = PLL_28,
2455 .no_msp34xx = 1,
2456 .no_tda7432 = 1,
2457 .muxsel_hook = kodicom4400r_muxsel,
2458 },
2459 [BTTV_BOARD_KODICOM_4400R_SL] = {
2460 /* Bill Brack <wbrack@mmm.com.hk> */
2461 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2462 * one which controls the analog switch, and must use the card type)
2463 * is the 2nd one detected. The other 3 chips should use this card
2464 * type
2465 */
2466 .name = "Kodicom 4400R (slave)",
2467 .video_inputs = 16,
2468 /* .audio_inputs= 0, */
2469 .tuner_type = TUNER_ABSENT,
2470 .tuner_addr = ADDR_UNSET,
2471 .svhs = NO_SVHS,
2472 .gpiomask = 0x010000,
2473 .no_gpioirq = 1,
2474 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2475 .pll = PLL_28,
2476 .no_msp34xx = 1,
2477 .no_tda7432 = 1,
2478 .muxsel_hook = kodicom4400r_muxsel,
2479 },
2480 /* ---- card 0x86---------------------------------- */
2481 [BTTV_BOARD_ADLINK_RTV24] = {
2482 /* Michael Henson <mhenson@clarityvi.com> */
2483 /* Adlink RTV24 with special unlock codes */
2484 .name = "Adlink RTV24",
2485 .video_inputs = 4,
2486 /* .audio_inputs= 1, */
2487 .svhs = 2,
2488 .muxsel = MUXSEL(2, 3, 1, 0),
2489 .tuner_type = UNSET,
2490 .tuner_addr = ADDR_UNSET,
2491 .pll = PLL_28,
2492 },
2493 /* ---- card 0x87---------------------------------- */
2494 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2495 /* Michael Krufky <mkrufky@m1k.net> */
2496 .name = "DViCO FusionHDTV 5 Lite",
2497 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2498 .tuner_addr = ADDR_UNSET,
2499 .video_inputs = 3,
2500 /* .audio_inputs= 1, */
2501 .svhs = 2,
2502 .muxsel = MUXSEL(2, 3, 1),
2503 .gpiomask = 0x00e00007,
2504 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2505 .gpiomute = 0x00c00007,
2506 .no_msp34xx = 1,
2507 .no_tda7432 = 1,
2508 .has_dvb = 1,
2509 },
2510 /* ---- card 0x88---------------------------------- */
2511 [BTTV_BOARD_ACORP_Y878F] = {
2512 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2513 .name = "Acorp Y878F",
2514 .video_inputs = 3,
2515 /* .audio_inputs= 1, */
2516 .svhs = 2,
2517 .gpiomask = 0x01fe00,
2518 .muxsel = MUXSEL(2, 3, 1, 1),
2519 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2520 .gpiomute = 0x002000,
2521 .needs_tvaudio = 1,
2522 .pll = PLL_28,
2523 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2524 .tuner_addr = 0xc1 >>1,
2525 .has_radio = 1,
2526 },
2527 /* ---- card 0x89 ---------------------------------- */
2528 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2529 .name = "Conceptronic CTVFMi v2",
2530 .video_inputs = 3,
2531 /* .audio_inputs= 1, */
2532 .svhs = 2,
2533 .gpiomask = 0x001c0007,
2534 .muxsel = MUXSEL(2, 3, 1, 1),
2535 .gpiomux = { 0, 1, 2, 2 },
2536 .gpiomute = 3,
2537 .needs_tvaudio = 0,
2538 .pll = PLL_28,
2539 .tuner_type = TUNER_TENA_9533_DI,
2540 .tuner_addr = ADDR_UNSET,
2541 .has_remote = 1,
2542 .has_radio = 1,
2543 },
2544 /* ---- card 0x8a ---------------------------------- */
2545 [BTTV_BOARD_PV_BT878P_2E] = {
2546 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2547 .video_inputs = 5,
2548 /* .audio_inputs= 1, */
2549 .svhs = 3,
2550 .has_dig_in = 1,
2551 .gpiomask = 0x01fe00,
2552 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2553 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2554 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2555 .gpiomute = 0x12400,
2556 .no_msp34xx = 1,
2557 .pll = PLL_28,
2558 .tuner_type = TUNER_LG_PAL_FM,
2559 .tuner_addr = ADDR_UNSET,
2560 .has_remote = 1,
2561 },
2562 /* ---- card 0x8b ---------------------------------- */
2563 [BTTV_BOARD_PV_M4900] = {
2564 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2565 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2566 .video_inputs = 3,
2567 /* .audio_inputs= 1, */
2568 .svhs = 2,
2569 .gpiomask = 0x3f,
2570 .muxsel = MUXSEL(2, 3, 1, 1),
2571 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2572 .gpiomute = 0x29,
2573 .no_msp34xx = 1,
2574 .pll = PLL_28,
2575 .tuner_type = TUNER_YMEC_TVF_5533MF,
2576 .tuner_addr = ADDR_UNSET,
2577 .has_radio = 1,
2578 .has_remote = 1,
2579 },
2580 /* ---- card 0x8c ---------------------------------- */
2581 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2582 one external BNC composite input (mux 2)
2583 three internal composite inputs (unknown muxes)
2584 an 18-bit stereo A/D (CS5331A), which has:
2585 one external stereo unblanced (RCA) audio connection
2586 one (or 3?) internal stereo balanced (XLR) audio connection
2587 input is selected via gpio to a 14052B mux
2588 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2589 gain is controlled via an X9221A chip on the I2C bus @0x28
2590 sample rate is controlled via gpio to an MK1413S
2591 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2592 There is neither a tuner nor an svideo input. */
2593 [BTTV_BOARD_OSPREY440] = {
2594 .name = "Osprey 440",
2595 .video_inputs = 4,
2596 /* .audio_inputs= 2, */
2597 .svhs = NO_SVHS,
2598 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2599 .gpiomask = 0x303,
2600 .gpiomute = 0x000, /* int + 32kHz */
2601 .gpiomux = { 0, 0, 0x000, 0x100},
2602 .pll = PLL_28,
2603 .tuner_type = TUNER_ABSENT,
2604 .tuner_addr = ADDR_UNSET,
2605 .no_msp34xx = 1,
2606 .no_tda7432 = 1,
2607 },
2608 /* ---- card 0x8d ---------------------------------- */
2609 [BTTV_BOARD_ASOUND_SKYEYE] = {
2610 .name = "Asound Skyeye PCTV",
2611 .video_inputs = 3,
2612 /* .audio_inputs= 1, */
2613 .svhs = 2,
2614 .gpiomask = 15,
2615 .muxsel = MUXSEL(2, 3, 1, 1),
2616 .gpiomux = { 2, 0, 0, 0 },
2617 .gpiomute = 1,
2618 .needs_tvaudio = 1,
2619 .pll = PLL_28,
2620 .tuner_type = TUNER_PHILIPS_NTSC,
2621 .tuner_addr = ADDR_UNSET,
2622 },
2623 /* ---- card 0x8e ---------------------------------- */
2624 [BTTV_BOARD_SABRENT_TVFM] = {
2625 .name = "Sabrent TV-FM (bttv version)",
2626 .video_inputs = 3,
2627 /* .audio_inputs= 1, */
2628 .svhs = 2,
2629 .gpiomask = 0x108007,
2630 .muxsel = MUXSEL(2, 3, 1, 1),
2631 .gpiomux = { 100000, 100002, 100002, 100000 },
2632 .no_msp34xx = 1,
2633 .no_tda7432 = 1,
2634 .pll = PLL_28,
2635 .tuner_type = TUNER_TNF_5335MF,
2636 .tuner_addr = ADDR_UNSET,
2637 .has_radio = 1,
2638 },
2639 /* ---- card 0x8f ---------------------------------- */
2640 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2641 .name = "Hauppauge ImpactVCB (bt878)",
2642 .video_inputs = 4,
2643 /* .audio_inputs= 0, */
2644 .svhs = NO_SVHS,
2645 .gpiomask = 0x0f, /* old: 7 */
2646 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2647 .no_msp34xx = 1,
2648 .no_tda7432 = 1,
2649 .tuner_type = TUNER_ABSENT,
2650 .tuner_addr = ADDR_UNSET,
2651 },
2652 [BTTV_BOARD_MACHTV_MAGICTV] = {
2653 /* Julian Calaby <julian.calaby@gmail.com>
2654 * Slightly different from original MachTV definition (0x60)
2655
2656 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2657 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2658 * properly (methinks) causing no keyup bits being set */
2659
2660 .name = "MagicTV", /* rebranded MachTV */
2661 .video_inputs = 3,
2662 /* .audio_inputs= 1, */
2663 .svhs = 2,
2664 .gpiomask = 7,
2665 .muxsel = MUXSEL(2, 3, 1, 1),
2666 .gpiomux = { 0, 1, 2, 3 },
2667 .gpiomute = 4,
2668 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2669 .tuner_addr = ADDR_UNSET,
2670 .pll = PLL_28,
2671 .has_radio = 1,
2672 .has_remote = 1,
2673 },
2674 [BTTV_BOARD_SSAI_SECURITY] = {
2675 .name = "SSAI Security Video Interface",
2676 .video_inputs = 4,
2677 /* .audio_inputs= 0, */
2678 .svhs = NO_SVHS,
2679 .muxsel = MUXSEL(0, 1, 2, 3),
2680 .tuner_type = TUNER_ABSENT,
2681 .tuner_addr = ADDR_UNSET,
2682 },
2683 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2684 .name = "SSAI Ultrasound Video Interface",
2685 .video_inputs = 2,
2686 /* .audio_inputs= 0, */
2687 .svhs = 1,
2688 .muxsel = MUXSEL(2, 0, 1, 3),
2689 .tuner_type = TUNER_ABSENT,
2690 .tuner_addr = ADDR_UNSET,
2691 },
2692 /* ---- card 0x94---------------------------------- */
2693 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2694 .name = "DViCO FusionHDTV 2",
2695 .tuner_type = TUNER_PHILIPS_FCV1236D,
2696 .tuner_addr = ADDR_UNSET,
2697 .video_inputs = 3,
2698 /* .audio_inputs= 1, */
2699 .svhs = 2,
2700 .muxsel = MUXSEL(2, 3, 1),
2701 .gpiomask = 0x00e00007,
2702 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2703 .gpiomute = 0x00c00007,
2704 .no_msp34xx = 1,
2705 .no_tda7432 = 1,
2706 },
2707 /* ---- card 0x95---------------------------------- */
2708 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2709 .name = "Typhoon TV-Tuner PCI (50684)",
2710 .video_inputs = 3,
2711 /* .audio_inputs= 1, */
2712 .svhs = 2,
2713 .gpiomask = 0x3014f,
2714 .muxsel = MUXSEL(2, 3, 1, 1),
2715 .gpiomux = { 0x20001,0x10001, 0, 0 },
2716 .gpiomute = 10,
2717 .needs_tvaudio = 1,
2718 .pll = PLL_28,
2719 .tuner_type = TUNER_PHILIPS_PAL_I,
2720 .tuner_addr = ADDR_UNSET,
2721 },
2722 [BTTV_BOARD_GEOVISION_GV600] = {
2723 /* emhn@usb.ve */
2724 .name = "Geovision GV-600",
2725 .video_inputs = 16,
2726 /* .audio_inputs= 0, */
2727 .svhs = NO_SVHS,
2728 .gpiomask = 0x0,
2729 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2730 .muxsel_hook = geovision_muxsel,
2731 .gpiomux = { 0 },
2732 .no_msp34xx = 1,
2733 .pll = PLL_28,
2734 .tuner_type = TUNER_ABSENT,
2735 .tuner_addr = ADDR_UNSET,
2736 },
2737 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2738 /* Mauro Lacy <mauro@lacy.com.ar>
2739 * Based on MagicTV and Conceptronic CONTVFMi */
2740
2741 .name = "Kozumi KTV-01C",
2742 .video_inputs = 3,
2743 /* .audio_inputs= 1, */
2744 .svhs = 2,
2745 .gpiomask = 0x008007,
2746 .muxsel = MUXSEL(2, 3, 1, 1),
2747 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2748 .gpiomute = 3, /* CONTVFMi */
2749 .needs_tvaudio = 0,
2750 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2751 .tuner_addr = ADDR_UNSET,
2752 .pll = PLL_28,
2753 .has_radio = 1,
2754 .has_remote = 1,
2755 },
2756 [BTTV_BOARD_ENLTV_FM_2] = {
2757 /* Encore TV Tuner Pro ENL TV-FM-2
2758 Mauro Carvalho Chehab <mchehab@infradead.org */
2759 .name = "Encore ENL TV-FM-2",
2760 .video_inputs = 3,
2761 /* .audio_inputs= 1, */
2762 .svhs = 2,
2763 /* bit 6 -> IR disabled
2764 bit 18/17 = 00 -> mute
2765 01 -> enable external audio input
2766 10 -> internal audio input (mono?)
2767 11 -> internal audio input
2768 */
2769 .gpiomask = 0x060040,
2770 .muxsel = MUXSEL(2, 3, 3),
2771 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2772 .gpiomute = 0,
2773 .tuner_type = TUNER_TCL_MF02GIP_5N,
2774 .tuner_addr = ADDR_UNSET,
2775 .pll = PLL_28,
2776 .has_radio = 1,
2777 .has_remote = 1,
2778 },
2779 [BTTV_BOARD_VD012] = {
2780 /* D.Heer@Phytec.de */
2781 .name = "PHYTEC VD-012 (bt878)",
2782 .video_inputs = 4,
2783 /* .audio_inputs= 0, */
2784 .svhs = NO_SVHS,
2785 .gpiomask = 0x00,
2786 .muxsel = MUXSEL(0, 2, 3, 1),
2787 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2788 .needs_tvaudio = 0,
2789 .pll = PLL_28,
2790 .tuner_type = TUNER_ABSENT,
2791 .tuner_addr = ADDR_UNSET,
2792 },
2793 [BTTV_BOARD_VD012_X1] = {
2794 /* D.Heer@Phytec.de */
2795 .name = "PHYTEC VD-012-X1 (bt878)",
2796 .video_inputs = 4,
2797 /* .audio_inputs= 0, */
2798 .svhs = 3,
2799 .gpiomask = 0x00,
2800 .muxsel = MUXSEL(2, 3, 1),
2801 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2802 .needs_tvaudio = 0,
2803 .pll = PLL_28,
2804 .tuner_type = TUNER_ABSENT,
2805 .tuner_addr = ADDR_UNSET,
2806 },
2807 [BTTV_BOARD_VD012_X2] = {
2808 /* D.Heer@Phytec.de */
2809 .name = "PHYTEC VD-012-X2 (bt878)",
2810 .video_inputs = 4,
2811 /* .audio_inputs= 0, */
2812 .svhs = 3,
2813 .gpiomask = 0x00,
2814 .muxsel = MUXSEL(3, 2, 1),
2815 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2816 .needs_tvaudio = 0,
2817 .pll = PLL_28,
2818 .tuner_type = TUNER_ABSENT,
2819 .tuner_addr = ADDR_UNSET,
2820 },
2821 [BTTV_BOARD_GEOVISION_GV800S] = {
2822 /* Bruno Christo <bchristo@inf.ufsm.br>
2823 *
2824 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2825 * 1 audio input per BT878A = 4 audio inputs
2826 * 4 video inputs per BT878A = 16 video inputs
2827 * This is the first BT878A chip of the GV-800(S). It's the
2828 * "master" chip and it controls the video inputs through an
2829 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2830 * slaves should use card type 0x9e (following this one).
2831 * There is a EEPROM on the card which is currently not handled.
2832 * The audio input is not working yet.
2833 */
2834 .name = "Geovision GV-800(S) (master)",
2835 .video_inputs = 4,
2836 /* .audio_inputs= 1, */
2837 .tuner_type = TUNER_ABSENT,
2838 .tuner_addr = ADDR_UNSET,
2839 .svhs = NO_SVHS,
2840 .gpiomask = 0xf107f,
2841 .no_gpioirq = 1,
2842 .muxsel = MUXSEL(2, 2, 2, 2),
2843 .pll = PLL_28,
2844 .no_msp34xx = 1,
2845 .no_tda7432 = 1,
2846 .muxsel_hook = gv800s_muxsel,
2847 },
2848 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2849 /* Bruno Christo <bchristo@inf.ufsm.br>
2850 *
2851 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2852 * 1 audio input per BT878A = 4 audio inputs
2853 * 4 video inputs per BT878A = 16 video inputs
2854 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2855 * and should use this card type.
2856 * The audio input is not working yet.
2857 */
2858 .name = "Geovision GV-800(S) (slave)",
2859 .video_inputs = 4,
2860 /* .audio_inputs= 1, */
2861 .tuner_type = TUNER_ABSENT,
2862 .tuner_addr = ADDR_UNSET,
2863 .svhs = NO_SVHS,
2864 .gpiomask = 0x00,
2865 .no_gpioirq = 1,
2866 .muxsel = MUXSEL(2, 2, 2, 2),
2867 .pll = PLL_28,
2868 .no_msp34xx = 1,
2869 .no_tda7432 = 1,
2870 .muxsel_hook = gv800s_muxsel,
2871 },
2872 [BTTV_BOARD_PV183] = {
2873 .name = "ProVideo PV183", /* 0x9f */
2874 .video_inputs = 2,
2875 /* .audio_inputs= 0, */
2876 .svhs = NO_SVHS,
2877 .gpiomask = 0,
2878 .muxsel = MUXSEL(2, 3),
2879 .gpiomux = { 0 },
2880 .needs_tvaudio = 0,
2881 .no_msp34xx = 1,
2882 .pll = PLL_28,
2883 .tuner_type = TUNER_ABSENT,
2884 .tuner_addr = ADDR_UNSET,
2885 },
2886 [BTTV_BOARD_TVT_TD3116] = {
2887 .name = "Tongwei Video Technology TD-3116",
2888 .video_inputs = 16,
2889 .gpiomask = 0xc00ff,
2890 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2891 .muxsel_hook = td3116_muxsel,
2892 .svhs = NO_SVHS,
2893 .pll = PLL_28,
2894 .tuner_type = TUNER_ABSENT,
2895 },
2896 };
2897
2898 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2899
2900 /* ----------------------------------------------------------------------- */
2901
2902 static unsigned char eeprom_data[256];
2903
2904 /*
2905 * identify card
2906 */
2907 void __devinit bttv_idcard(struct bttv *btv)
2908 {
2909 unsigned int gpiobits;
2910 int i,type;
2911
2912 /* read PCI subsystem ID */
2913 btv->cardid = btv->c.pci->subsystem_device << 16;
2914 btv->cardid |= btv->c.pci->subsystem_vendor;
2915
2916 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2917 /* look for the card */
2918 for (type = -1, i = 0; cards[i].id != 0; i++)
2919 if (cards[i].id == btv->cardid)
2920 type = i;
2921
2922 if (type != -1) {
2923 /* found it */
2924 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2925 btv->c.nr, cards[type].name, cards[type].cardnr,
2926 btv->cardid & 0xffff,
2927 (btv->cardid >> 16) & 0xffff);
2928 btv->c.type = cards[type].cardnr;
2929 } else {
2930 /* 404 */
2931 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2932 btv->c.nr, btv->cardid & 0xffff,
2933 (btv->cardid >> 16) & 0xffff);
2934 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2935 }
2936 }
2937
2938 /* let the user override the autodetected type */
2939 if (card[btv->c.nr] < bttv_num_tvcards)
2940 btv->c.type=card[btv->c.nr];
2941
2942 /* print which card config we are using */
2943 pr_info("%d: using: %s [card=%d,%s]\n",
2944 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2945 card[btv->c.nr] < bttv_num_tvcards
2946 ? "insmod option" : "autodetected");
2947
2948 /* overwrite gpio stuff ?? */
2949 if (UNSET == audioall && UNSET == audiomux[0])
2950 return;
2951
2952 if (UNSET != audiomux[0]) {
2953 gpiobits = 0;
2954 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2955 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2956 gpiobits |= audiomux[i];
2957 }
2958 } else {
2959 gpiobits = audioall;
2960 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2961 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2962 }
2963 }
2964 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2965 pr_info("%d: gpio config override: mask=0x%x, mux=",
2966 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2967 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2968 pr_cont("%s0x%x",
2969 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2970 }
2971 pr_cont("\n");
2972 }
2973
2974 /*
2975 * (most) board specific initialisations goes here
2976 */
2977
2978 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2979 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2980 {
2981 int type = -1;
2982
2983 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2984 type = BTTV_BOARD_MODTEC_205;
2985 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2986 type = BTTV_BOARD_EURESYS_PICOLO;
2987 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2988 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2989
2990 if (-1 != type) {
2991 btv->c.type = type;
2992 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2993 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2994 }
2995 }
2996
2997 static void flyvideo_gpio(struct bttv *btv)
2998 {
2999 int gpio, has_remote, has_radio, is_capture_only;
3000 int is_lr90, has_tda9820_tda9821;
3001 int tuner_type = UNSET, ttype;
3002
3003 gpio_inout(0xffffff, 0);
3004 udelay(8); /* without this we would see the 0x1800 mask */
3005 gpio = gpio_read();
3006 /* FIXME: must restore OUR_EN ??? */
3007
3008 /* all cards provide GPIO info, some have an additional eeprom
3009 * LR50: GPIO coding can be found lower right CP1 .. CP9
3010 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3011 * GPIO14-12: n.c.
3012 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3013
3014 * lowest 3 bytes are remote control codes (no handshake needed)
3015 * xxxFFF: No remote control chip soldered
3016 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3017 * Note: Some bits are Audio_Mask !
3018 */
3019 ttype = (gpio & 0x0f0000) >> 16;
3020 switch (ttype) {
3021 case 0x0:
3022 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3023 break;
3024 case 0x2:
3025 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3026 break;
3027 case 0x4:
3028 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3029 break;
3030 case 0x6:
3031 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3032 break;
3033 case 0xC:
3034 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3035 break;
3036 default:
3037 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3038 break;
3039 }
3040
3041 has_remote = gpio & 0x800000;
3042 has_radio = gpio & 0x400000;
3043 /* unknown 0x200000;
3044 * unknown2 0x100000; */
3045 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3046 has_tda9820_tda9821 = !(gpio & 0x004000);
3047 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3048 /*
3049 * gpio & 0x001000 output bit for audio routing */
3050
3051 if (is_capture_only)
3052 tuner_type = TUNER_ABSENT; /* No tuner present */
3053
3054 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3055 btv->c.nr, has_radio ? "yes" : "no",
3056 has_remote ? "yes" : "no", tuner_type, gpio);
3057 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3058 btv->c.nr, is_lr90 ? "yes" : "no",
3059 has_tda9820_tda9821 ? "yes" : "no",
3060 is_capture_only ? "yes" : "no");
3061
3062 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3063 btv->tuner_type = tuner_type;
3064 btv->has_radio = has_radio;
3065
3066 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3067 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3068 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3069 if (has_tda9820_tda9821)
3070 btv->audio_mode_gpio = lt9415_audio;
3071 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3072 }
3073
3074 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3075 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3076 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3077 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3078
3079 static void miro_pinnacle_gpio(struct bttv *btv)
3080 {
3081 int id,msp,gpio;
3082 char *info;
3083
3084 gpio_inout(0xffffff, 0);
3085 gpio = gpio_read();
3086 id = ((gpio>>10) & 63) -1;
3087 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3088 if (id < 32) {
3089 btv->tuner_type = miro_tunermap[id];
3090 if (0 == (gpio & 0x20)) {
3091 btv->has_radio = 1;
3092 if (!miro_fmtuner[id]) {
3093 btv->has_matchbox = 1;
3094 btv->mbox_we = (1<<6);
3095 btv->mbox_most = (1<<7);
3096 btv->mbox_clk = (1<<8);
3097 btv->mbox_data = (1<<9);
3098 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3099 }
3100 } else {
3101 btv->has_radio = 0;
3102 }
3103 if (-1 != msp) {
3104 if (btv->c.type == BTTV_BOARD_MIRO)
3105 btv->c.type = BTTV_BOARD_MIROPRO;
3106 if (btv->c.type == BTTV_BOARD_PINNACLE)
3107 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3108 }
3109 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3110 btv->c.nr, id+1, btv->tuner_type,
3111 !btv->has_radio ? "no" :
3112 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3113 (-1 == msp) ? "no" : "yes");
3114 } else {
3115 /* new cards with microtune tuner */
3116 id = 63 - id;
3117 btv->has_radio = 0;
3118 switch (id) {
3119 case 1:
3120 info = "PAL / mono";
3121 btv->tda9887_conf = TDA9887_INTERCARRIER;
3122 break;
3123 case 2:
3124 info = "PAL+SECAM / stereo";
3125 btv->has_radio = 1;
3126 btv->tda9887_conf = TDA9887_QSS;
3127 break;
3128 case 3:
3129 info = "NTSC / stereo";
3130 btv->has_radio = 1;
3131 btv->tda9887_conf = TDA9887_QSS;
3132 break;
3133 case 4:
3134 info = "PAL+SECAM / mono";
3135 btv->tda9887_conf = TDA9887_QSS;
3136 break;
3137 case 5:
3138 info = "NTSC / mono";
3139 btv->tda9887_conf = TDA9887_INTERCARRIER;
3140 break;
3141 case 6:
3142 info = "NTSC / stereo";
3143 btv->tda9887_conf = TDA9887_INTERCARRIER;
3144 break;
3145 case 7:
3146 info = "PAL / stereo";
3147 btv->tda9887_conf = TDA9887_INTERCARRIER;
3148 break;
3149 default:
3150 info = "oops: unknown card";
3151 break;
3152 }
3153 if (-1 != msp)
3154 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3155 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3156 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3157 btv->tuner_type = TUNER_MT2032;
3158 }
3159 }
3160
3161 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3162 #define LM1882_SYNC_DRIVE 0x200000L
3163
3164 static void init_ids_eagle(struct bttv *btv)
3165 {
3166 gpio_inout(0xffffff,0xFFFF37);
3167 gpio_write(0x200020);
3168
3169 /* flash strobe inverter ?! */
3170 gpio_write(0x200024);
3171
3172 /* switch sync drive off */
3173 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3174
3175 /* set BT848 muxel to 2 */
3176 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3177 }
3178
3179 /* Muxsel helper for the IDS Eagle.
3180 * the eagles does not use the standard muxsel-bits but
3181 * has its own multiplexer */
3182 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3183 {
3184 gpio_bits(3, input & 3);
3185
3186 /* composite */
3187 /* set chroma ADC to sleep */
3188 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3189 /* set to composite video */
3190 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3191 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3192
3193 /* switch sync drive off */
3194 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3195 }
3196
3197 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3198 {
3199 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3200 gpio_write(masks[input%4]);
3201 }
3202
3203 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3204 alarms output
3205
3206 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3207 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3208
3209 IN - sensor inputs, INx - sensor inputs and TI XORed together
3210 O1,O2,O3 - alarm outputs (relays)
3211
3212 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3213
3214 */
3215
3216 static void init_lmlbt4x(struct bttv *btv)
3217 {
3218 pr_debug("LMLBT4x init\n");
3219 btwrite(0x000000, BT848_GPIO_REG_INP);
3220 gpio_inout(0xffffff, 0x0006C0);
3221 gpio_write(0x000000);
3222 }
3223
3224 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3225 {
3226 unsigned int inmux = input % 8;
3227 gpio_inout( 0xf, 0xf );
3228 gpio_bits( 0xf, inmux );
3229 }
3230
3231 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3232 {
3233 unsigned int inmux = input % 4;
3234 gpio_inout( 3<<9, 3<<9 );
3235 gpio_bits( 3<<9, inmux<<9 );
3236 }
3237
3238 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3239 {
3240 unsigned int inmux = input % 16;
3241 gpio_inout(0xf, 0xf);
3242 gpio_bits(0xf, inmux);
3243 }
3244
3245 /*
3246 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3247 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3248 * The muxes are controlled via a 74HC373 latch which is connected to
3249 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3250 * Q0 of the latch is connected to the Enable (~E) input of the first
3251 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3252 * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3253 */
3254
3255 static void td3116_latch_value(struct bttv *btv, u32 value)
3256 {
3257 gpio_bits((1<<18) | 0xff, value);
3258 gpio_bits((1<<18) | 0xff, (1<<18) | value);
3259 udelay(1);
3260 gpio_bits((1<<18) | 0xff, value);
3261 }
3262
3263 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3264 {
3265 u32 value;
3266 u32 highbit;
3267
3268 highbit = (input & 0x8) >> 3 ;
3269
3270 /* Disable outputs and set value in the mux */
3271 value = 0x11; /* Disable outputs */
3272 value |= ((input & 0x7) << 1) << (4 * highbit);
3273 td3116_latch_value(btv, value);
3274
3275 /* Enable the correct output */
3276 value &= ~0x11;
3277 value |= ((highbit ^ 0x1) << 4) | highbit;
3278 td3116_latch_value(btv, value);
3279 }
3280
3281 /* ----------------------------------------------------------------------- */
3282
3283 static void bttv_reset_audio(struct bttv *btv)
3284 {
3285 /*
3286 * BT878A has a audio-reset register.
3287 * 1. This register is an audio reset function but it is in
3288 * function-0 (video capture) address space.
3289 * 2. It is enough to do this once per power-up of the card.
3290 * 3. There is a typo in the Conexant doc -- it is not at
3291 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3292 * --//Shrikumar 030609
3293 */
3294 if (btv->id != 878)
3295 return;
3296
3297 if (bttv_debug)
3298 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3299 btwrite((1<<7), 0x058);
3300 udelay(10);
3301 btwrite( 0, 0x058);
3302 }
3303
3304 /* initialization part one -- before registering i2c bus */
3305 void __devinit bttv_init_card1(struct bttv *btv)
3306 {
3307 switch (btv->c.type) {
3308 case BTTV_BOARD_HAUPPAUGE:
3309 case BTTV_BOARD_HAUPPAUGE878:
3310 boot_msp34xx(btv,5);
3311 break;
3312 case BTTV_BOARD_VOODOOTV_200:
3313 case BTTV_BOARD_VOODOOTV_FM:
3314 boot_msp34xx(btv,20);
3315 break;
3316 case BTTV_BOARD_AVERMEDIA98:
3317 boot_msp34xx(btv,11);
3318 break;
3319 case BTTV_BOARD_HAUPPAUGEPVR:
3320 pvr_boot(btv);
3321 break;
3322 case BTTV_BOARD_TWINHAN_DST:
3323 case BTTV_BOARD_AVDVBT_771:
3324 case BTTV_BOARD_PINNACLESAT:
3325 btv->use_i2c_hw = 1;
3326 break;
3327 case BTTV_BOARD_ADLINK_RTV24:
3328 init_RTV24( btv );
3329 break;
3330
3331 }
3332 if (!bttv_tvcards[btv->c.type].has_dvb)
3333 bttv_reset_audio(btv);
3334 }
3335
3336 /* initialization part two -- after registering i2c bus */
3337 void __devinit bttv_init_card2(struct bttv *btv)
3338 {
3339 btv->tuner_type = UNSET;
3340
3341 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3342 bttv_readee(btv,eeprom_data,0xa0);
3343 identify_by_eeprom(btv,eeprom_data);
3344 }
3345
3346 switch (btv->c.type) {
3347 case BTTV_BOARD_MIRO:
3348 case BTTV_BOARD_MIROPRO:
3349 case BTTV_BOARD_PINNACLE:
3350 case BTTV_BOARD_PINNACLEPRO:
3351 /* miro/pinnacle */
3352 miro_pinnacle_gpio(btv);
3353 break;
3354 case BTTV_BOARD_FLYVIDEO_98:
3355 case BTTV_BOARD_MAXI:
3356 case BTTV_BOARD_LIFE_FLYKIT:
3357 case BTTV_BOARD_FLYVIDEO:
3358 case BTTV_BOARD_TYPHOON_TVIEW:
3359 case BTTV_BOARD_CHRONOS_VS2:
3360 case BTTV_BOARD_FLYVIDEO_98FM:
3361 case BTTV_BOARD_FLYVIDEO2000:
3362 case BTTV_BOARD_FLYVIDEO98EZ:
3363 case BTTV_BOARD_CONFERENCETV:
3364 case BTTV_BOARD_LIFETEC_9415:
3365 flyvideo_gpio(btv);
3366 break;
3367 case BTTV_BOARD_HAUPPAUGE:
3368 case BTTV_BOARD_HAUPPAUGE878:
3369 case BTTV_BOARD_HAUPPAUGEPVR:
3370 /* pick up some config infos from the eeprom */
3371 bttv_readee(btv,eeprom_data,0xa0);
3372 hauppauge_eeprom(btv);
3373 break;
3374 case BTTV_BOARD_AVERMEDIA98:
3375 case BTTV_BOARD_AVPHONE98:
3376 bttv_readee(btv,eeprom_data,0xa0);
3377 avermedia_eeprom(btv);
3378 break;
3379 case BTTV_BOARD_PXC200:
3380 init_PXC200(btv);
3381 break;
3382 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3383 picolo_tetra_init(btv);
3384 break;
3385 case BTTV_BOARD_VHX:
3386 btv->has_radio = 1;
3387 btv->has_matchbox = 1;
3388 btv->mbox_we = 0x20;
3389 btv->mbox_most = 0;
3390 btv->mbox_clk = 0x08;
3391 btv->mbox_data = 0x10;
3392 btv->mbox_mask = 0x38;
3393 break;
3394 case BTTV_BOARD_VOBIS_BOOSTAR:
3395 case BTTV_BOARD_TERRATV:
3396 terratec_active_radio_upgrade(btv);
3397 break;
3398 case BTTV_BOARD_MAGICTVIEW061:
3399 if (btv->cardid == 0x3002144f) {
3400 btv->has_radio=1;
3401 pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3402 btv->c.nr);
3403 }
3404 break;
3405 case BTTV_BOARD_STB2:
3406 if (btv->cardid == 0x3060121a) {
3407 /* Fix up entry for 3DFX VoodooTV 100,
3408 which is an OEM STB card variant. */
3409 btv->has_radio=0;
3410 btv->tuner_type=TUNER_TEMIC_NTSC;
3411 }
3412 break;
3413 case BTTV_BOARD_OSPREY1x0:
3414 case BTTV_BOARD_OSPREY1x0_848:
3415 case BTTV_BOARD_OSPREY101_848:
3416 case BTTV_BOARD_OSPREY1x1:
3417 case BTTV_BOARD_OSPREY1x1_SVID:
3418 case BTTV_BOARD_OSPREY2xx:
3419 case BTTV_BOARD_OSPREY2x0_SVID:
3420 case BTTV_BOARD_OSPREY2x0:
3421 case BTTV_BOARD_OSPREY440:
3422 case BTTV_BOARD_OSPREY500:
3423 case BTTV_BOARD_OSPREY540:
3424 case BTTV_BOARD_OSPREY2000:
3425 bttv_readee(btv,eeprom_data,0xa0);
3426 osprey_eeprom(btv, eeprom_data);
3427 break;
3428 case BTTV_BOARD_IDS_EAGLE:
3429 init_ids_eagle(btv);
3430 break;
3431 case BTTV_BOARD_MODTEC_205:
3432 bttv_readee(btv,eeprom_data,0xa0);
3433 modtec_eeprom(btv);
3434 break;
3435 case BTTV_BOARD_LMLBT4:
3436 init_lmlbt4x(btv);
3437 break;
3438 case BTTV_BOARD_TIBET_CS16:
3439 tibetCS16_init(btv);
3440 break;
3441 case BTTV_BOARD_KODICOM_4400R:
3442 kodicom4400r_init(btv);
3443 break;
3444 case BTTV_BOARD_GEOVISION_GV800S:
3445 gv800s_init(btv);
3446 break;
3447 }
3448
3449 /* pll configuration */
3450 if (!(btv->id==848 && btv->revision==0x11)) {
3451 /* defaults from card list */
3452 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3453 btv->pll.pll_ifreq=28636363;
3454 btv->pll.pll_crystal=BT848_IFORM_XT0;
3455 }
3456 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3457 btv->pll.pll_ifreq=35468950;
3458 btv->pll.pll_crystal=BT848_IFORM_XT1;
3459 }
3460 /* insmod options can override */
3461 switch (pll[btv->c.nr]) {
3462 case 0: /* none */
3463 btv->pll.pll_crystal = 0;
3464 btv->pll.pll_ifreq = 0;
3465 btv->pll.pll_ofreq = 0;
3466 break;
3467 case 1: /* 28 MHz */
3468 case 28:
3469 btv->pll.pll_ifreq = 28636363;
3470 btv->pll.pll_ofreq = 0;
3471 btv->pll.pll_crystal = BT848_IFORM_XT0;
3472 break;
3473 case 2: /* 35 MHz */
3474 case 35:
3475 btv->pll.pll_ifreq = 35468950;
3476 btv->pll.pll_ofreq = 0;
3477 btv->pll.pll_crystal = BT848_IFORM_XT1;
3478 break;
3479 }
3480 }
3481 btv->pll.pll_current = -1;
3482
3483 /* tuner configuration (from card list / autodetect / insmod option) */
3484 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3485 if (UNSET == btv->tuner_type)
3486 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3487 if (UNSET != tuner[btv->c.nr])
3488 btv->tuner_type = tuner[btv->c.nr];
3489
3490 if (btv->tuner_type == TUNER_ABSENT)
3491 pr_info("%d: tuner absent\n", btv->c.nr);
3492 else if (btv->tuner_type == UNSET)
3493 pr_warn("%d: tuner type unset\n", btv->c.nr);
3494 else
3495 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3496
3497 if (autoload != UNSET) {
3498 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3499 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3500 btv->c.nr);
3501 }
3502
3503 if (UNSET == btv->tuner_type)
3504 btv->tuner_type = TUNER_ABSENT;
3505
3506 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3507 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3508 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3509 UNSET : bttv_tvcards[btv->c.type].svhs;
3510 if (svhs[btv->c.nr] != UNSET)
3511 btv->svhs = svhs[btv->c.nr];
3512 if (remote[btv->c.nr] != UNSET)
3513 btv->has_remote = remote[btv->c.nr];
3514
3515 if (bttv_tvcards[btv->c.type].has_radio)
3516 btv->has_radio = 1;
3517 if (bttv_tvcards[btv->c.type].has_remote)
3518 btv->has_remote = 1;
3519 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3520 btv->gpioirq = 1;
3521 if (bttv_tvcards[btv->c.type].volume_gpio)
3522 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3523 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3524 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3525
3526 if (btv->tuner_type == TUNER_ABSENT)
3527 return; /* no tuner or related drivers to load */
3528
3529 if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3530 /* Probe for RDS receiver chip */
3531 static const unsigned short addrs[] = {
3532 0x20 >> 1,
3533 0x22 >> 1,
3534 I2C_CLIENT_END
3535 };
3536 struct v4l2_subdev *sd;
3537
3538 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3539 &btv->c.i2c_adap, "saa6588", 0, addrs);
3540 btv->has_saa6588 = (sd != NULL);
3541 }
3542
3543 /* try to detect audio/fader chips */
3544
3545 /* First check if the user specified the audio chip via a module
3546 option. */
3547
3548 switch (audiodev[btv->c.nr]) {
3549 case -1:
3550 return; /* do not load any audio module */
3551
3552 case 0: /* autodetect */
3553 break;
3554
3555 case 1: {
3556 /* The user specified that we should probe for msp3400 */
3557 static const unsigned short addrs[] = {
3558 I2C_ADDR_MSP3400 >> 1,
3559 I2C_ADDR_MSP3400_ALT >> 1,
3560 I2C_CLIENT_END
3561 };
3562
3563 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3564 &btv->c.i2c_adap, "msp3400", 0, addrs);
3565 if (btv->sd_msp34xx)
3566 return;
3567 goto no_audio;
3568 }
3569
3570 case 2: {
3571 /* The user specified that we should probe for tda7432 */
3572 static const unsigned short addrs[] = {
3573 I2C_ADDR_TDA7432 >> 1,
3574 I2C_CLIENT_END
3575 };
3576
3577 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3578 &btv->c.i2c_adap, "tda7432", 0, addrs))
3579 return;
3580 goto no_audio;
3581 }
3582
3583 case 3: {
3584 /* The user specified that we should probe for tvaudio */
3585 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3586 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3587 if (btv->sd_tvaudio)
3588 return;
3589 goto no_audio;
3590 }
3591
3592 default:
3593 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3594 return;
3595 }
3596
3597 /* There were no overrides, so now we try to discover this through the
3598 card definition */
3599
3600 /* probe for msp3400 first: this driver can detect whether or not
3601 it really is a msp3400, so it will return NULL when the device
3602 found is really something else (e.g. a tea6300). */
3603 if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3604 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3605 &btv->c.i2c_adap, "msp3400",
3606 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3607 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3608 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3609 &btv->c.i2c_adap, "msp3400",
3610 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3611 }
3612
3613 /* If we found a msp34xx, then we're done. */
3614 if (btv->sd_msp34xx)
3615 return;
3616
3617 /* it might also be a tda7432. */
3618 if (!bttv_tvcards[btv->c.type].no_tda7432) {
3619 static const unsigned short addrs[] = {
3620 I2C_ADDR_TDA7432 >> 1,
3621 I2C_CLIENT_END
3622 };
3623
3624 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3625 &btv->c.i2c_adap, "tda7432", 0, addrs))
3626 return;
3627 }
3628
3629 /* Now see if we can find one of the tvaudio devices. */
3630 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3631 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3632 if (btv->sd_tvaudio)
3633 return;
3634
3635 no_audio:
3636 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3637 }
3638
3639
3640 /* initialize the tuner */
3641 void __devinit bttv_init_tuner(struct bttv *btv)
3642 {
3643 int addr = ADDR_UNSET;
3644
3645 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3646 addr = bttv_tvcards[btv->c.type].tuner_addr;
3647
3648 if (btv->tuner_type != TUNER_ABSENT) {
3649 struct tuner_setup tun_setup;
3650
3651 /* Load tuner module before issuing tuner config call! */
3652 if (bttv_tvcards[btv->c.type].has_radio)
3653 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3654 &btv->c.i2c_adap, "tuner",
3655 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3656 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3657 &btv->c.i2c_adap, "tuner",
3658 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3659 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3660 &btv->c.i2c_adap, "tuner",
3661 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3662
3663 tun_setup.mode_mask = T_ANALOG_TV;
3664 tun_setup.type = btv->tuner_type;
3665 tun_setup.addr = addr;
3666
3667 if (bttv_tvcards[btv->c.type].has_radio)
3668 tun_setup.mode_mask |= T_RADIO;
3669
3670 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3671 }
3672
3673 if (btv->tda9887_conf) {
3674 struct v4l2_priv_tun_config tda9887_cfg;
3675
3676 tda9887_cfg.tuner = TUNER_TDA9887;
3677 tda9887_cfg.priv = &btv->tda9887_conf;
3678
3679 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3680 }
3681 }
3682
3683 /* ----------------------------------------------------------------------- */
3684
3685 static void modtec_eeprom(struct bttv *btv)
3686 {
3687 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3688 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3689 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3690 btv->c.nr, &eeprom_data[0x1e]);
3691 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3692 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3693 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3694 btv->c.nr, &eeprom_data[0x1e]);
3695 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3696 btv->tuner_type=TUNER_PHILIPS_NTSC;
3697 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3698 btv->c.nr, &eeprom_data[0x1e]);
3699 } else {
3700 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3701 btv->c.nr, &eeprom_data[0x1e]);
3702 }
3703 }
3704
3705 static void __devinit hauppauge_eeprom(struct bttv *btv)
3706 {
3707 struct tveeprom tv;
3708
3709 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3710 btv->tuner_type = tv.tuner_type;
3711 btv->has_radio = tv.has_radio;
3712
3713 pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3714 btv->c.nr, tv.model);
3715
3716 /*
3717 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3718 * type based on model #.
3719 */
3720 if(tv.model == 64900) {
3721 pr_info("%d: Switching board type from %s to %s\n",
3722 btv->c.nr,
3723 bttv_tvcards[btv->c.type].name,
3724 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3725 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3726 }
3727 }
3728
3729 static int terratec_active_radio_upgrade(struct bttv *btv)
3730 {
3731 int freq;
3732
3733 btv->has_radio = 1;
3734 btv->has_matchbox = 1;
3735 btv->mbox_we = 0x10;
3736 btv->mbox_most = 0x20;
3737 btv->mbox_clk = 0x08;
3738 btv->mbox_data = 0x04;
3739 btv->mbox_mask = 0x3c;
3740
3741 btv->mbox_iow = 1 << 8;
3742 btv->mbox_ior = 1 << 9;
3743 btv->mbox_csel = 1 << 10;
3744
3745 freq=88000/62.5;
3746 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3747 if (0x1ed8 == tea5757_read(btv)) {
3748 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3749 btv->has_radio = 1;
3750 btv->has_saa6588 = 1;
3751 btv->has_matchbox = 1;
3752 } else {
3753 btv->has_radio = 0;
3754 btv->has_matchbox = 0;
3755 }
3756 return 0;
3757 }
3758
3759
3760 /* ----------------------------------------------------------------------- */
3761
3762 /*
3763 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3764 *
3765 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3766 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3767 * unpacked with unzip).
3768 */
3769 #define PVR_GPIO_DELAY 10
3770
3771 #define BTTV_ALT_DATA 0x000001
3772 #define BTTV_ALT_DCLK 0x100000
3773 #define BTTV_ALT_NCONFIG 0x800000
3774
3775 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3776 u32 microlen)
3777 {
3778 u32 n;
3779 u8 bits;
3780 int i;
3781
3782 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3783 gpio_write(0);
3784 udelay(PVR_GPIO_DELAY);
3785
3786 gpio_write(BTTV_ALT_NCONFIG);
3787 udelay(PVR_GPIO_DELAY);
3788
3789 for (n = 0; n < microlen; n++) {
3790 bits = micro[n];
3791 for (i = 0 ; i < 8 ; i++) {
3792 gpio_bits(BTTV_ALT_DCLK,0);
3793 if (bits & 0x01)
3794 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3795 else
3796 gpio_bits(BTTV_ALT_DATA,0);
3797 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3798 bits >>= 1;
3799 }
3800 }
3801 gpio_bits(BTTV_ALT_DCLK,0);
3802 udelay(PVR_GPIO_DELAY);
3803
3804 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3805 for (i = 0 ; i < 30 ; i++) {
3806 gpio_bits(BTTV_ALT_DCLK,0);
3807 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3808 }
3809 gpio_bits(BTTV_ALT_DCLK,0);
3810 return 0;
3811 }
3812
3813 static int __devinit pvr_boot(struct bttv *btv)
3814 {
3815 const struct firmware *fw_entry;
3816 int rc;
3817
3818 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3819 if (rc != 0) {
3820 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3821 return rc;
3822 }
3823 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3824 pr_info("%d: altera firmware upload %s\n",
3825 btv->c.nr, (rc < 0) ? "failed" : "ok");
3826 release_firmware(fw_entry);
3827 return rc;
3828 }
3829
3830 /* ----------------------------------------------------------------------- */
3831 /* some osprey specific stuff */
3832
3833 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3834 {
3835 int i;
3836 u32 serial = 0;
3837 int cardid = -1;
3838
3839 /* This code will nevery actually get called in this case.... */
3840 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3841 /* this might be an antique... check for MMAC label in eeprom */
3842 if (!strncmp(ee, "MMAC", 4)) {
3843 u8 checksum = 0;
3844 for (i = 0; i < 21; i++)
3845 checksum += ee[i];
3846 if (checksum != ee[21])
3847 return;
3848 cardid = BTTV_BOARD_OSPREY1x0_848;
3849 for (i = 12; i < 21; i++)
3850 serial *= 10, serial += ee[i] - '0';
3851 }
3852 } else {
3853 unsigned short type;
3854
3855 for (i = 4*16; i < 8*16; i += 16) {
3856 u16 checksum = ip_compute_csum(ee + i, 16);
3857
3858 if ((checksum&0xff) + (checksum>>8) == 0xff)
3859 break;
3860 }
3861 if (i >= 8*16)
3862 return;
3863 ee += i;
3864
3865 /* found a valid descriptor */
3866 type = get_unaligned_be16((__be16 *)(ee+4));
3867
3868 switch(type) {
3869 /* 848 based */
3870 case 0x0004:
3871 cardid = BTTV_BOARD_OSPREY1x0_848;
3872 break;
3873 case 0x0005:
3874 cardid = BTTV_BOARD_OSPREY101_848;
3875 break;
3876
3877 /* 878 based */
3878 case 0x0012:
3879 case 0x0013:
3880 cardid = BTTV_BOARD_OSPREY1x0;
3881 break;
3882 case 0x0014:
3883 case 0x0015:
3884 cardid = BTTV_BOARD_OSPREY1x1;
3885 break;
3886 case 0x0016:
3887 case 0x0017:
3888 case 0x0020:
3889 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3890 break;
3891 case 0x0018:
3892 case 0x0019:
3893 case 0x001E:
3894 case 0x001F:
3895 cardid = BTTV_BOARD_OSPREY2xx;
3896 break;
3897 case 0x001A:
3898 case 0x001B:
3899 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3900 break;
3901 case 0x0040:
3902 cardid = BTTV_BOARD_OSPREY500;
3903 break;
3904 case 0x0050:
3905 case 0x0056:
3906 cardid = BTTV_BOARD_OSPREY540;
3907 /* bttv_osprey_540_init(btv); */
3908 break;
3909 case 0x0060:
3910 case 0x0070:
3911 case 0x00A0:
3912 cardid = BTTV_BOARD_OSPREY2x0;
3913 /* enable output on select control lines */
3914 gpio_inout(0xffffff,0x000303);
3915 break;
3916 case 0x00D8:
3917 cardid = BTTV_BOARD_OSPREY440;
3918 break;
3919 default:
3920 /* unknown...leave generic, but get serial # */
3921 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
3922 btv->c.nr, type);
3923 break;
3924 }
3925 serial = get_unaligned_be32((__be32 *)(ee+6));
3926 }
3927
3928 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
3929 btv->c.nr, cardid,
3930 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3931
3932 if (cardid<0 || btv->c.type == cardid)
3933 return;
3934
3935 /* card type isn't set correctly */
3936 if (card[btv->c.nr] < bttv_num_tvcards) {
3937 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
3938 btv->c.nr);
3939 } else {
3940 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
3941 btv->c.nr, btv->c.type, cardid);
3942 btv->c.type = cardid;
3943 }
3944 }
3945
3946 /* ----------------------------------------------------------------------- */
3947 /* AVermedia specific stuff, from bktr_card.c */
3948
3949 static int tuner_0_table[] = {
3950 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3951 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3952 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3953 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3954 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3955 TUNER_PHILIPS_FM1216ME_MK3 };
3956
3957 static int tuner_1_table[] = {
3958 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3959 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3960 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3961 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3962 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3963
3964 static void __devinit avermedia_eeprom(struct bttv *btv)
3965 {
3966 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3967
3968 tuner_make = (eeprom_data[0x41] & 0x7);
3969 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3970 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3971 btv->has_remote = (eeprom_data[0x42] & 0x01);
3972
3973 if (tuner_make == 0 || tuner_make == 2)
3974 if (tuner_format <= 0x0a)
3975 tuner_type = tuner_0_table[tuner_format];
3976 if (tuner_make == 1)
3977 if (tuner_format <= 9)
3978 tuner_type = tuner_1_table[tuner_format];
3979
3980 if (tuner_make == 4)
3981 if (tuner_format == 0x09)
3982 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3983
3984 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3985 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3986 if (tuner_type) {
3987 btv->tuner_type = tuner_type;
3988 pr_cont("%d", tuner_type);
3989 } else
3990 pr_cont("Unknown type");
3991 pr_cont(" radio:%s remote control:%s\n",
3992 tuner_tv_fm ? "yes" : "no",
3993 btv->has_remote ? "yes" : "no");
3994 }
3995
3996 /*
3997 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3998 * analog demod, which is not I2C controlled like the newer and more common
3999 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
4000 * that control the IF for the video and audio. Apparently, bttv GPIO
4001 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4002 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4003 */
4004 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4005 {
4006
4007 if (btv->audio == TVAUDIO_INPUT_TUNER) {
4008 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4009 gpiobits |= 0x10000;
4010 else
4011 gpiobits &= ~0x10000;
4012 }
4013
4014 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4015 return gpiobits;
4016 }
4017
4018
4019 /*
4020 * reset/enable the MSP on some Hauppauge cards
4021 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4022 *
4023 * Hauppauge: pin 5
4024 * Voodoo: pin 20
4025 */
4026 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
4027 {
4028 int mask = (1 << pin);
4029
4030 gpio_inout(mask,mask);
4031 gpio_bits(mask,0);
4032 mdelay(2);
4033 udelay(500);
4034 gpio_bits(mask,mask);
4035
4036 if (bttv_gpio)
4037 bttv_gpio_tracking(btv,"msp34xx");
4038 if (bttv_verbose)
4039 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4040 btv->c.nr, pin);
4041 }
4042
4043 /* ----------------------------------------------------------------------- */
4044 /* Imagenation L-Model PXC200 Framegrabber */
4045 /* This is basically the same procedure as
4046 * used by Alessandro Rubini in his pxc200
4047 * driver, but using BTTV functions */
4048
4049 static void __devinit init_PXC200(struct bttv *btv)
4050 {
4051 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4052 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4053 0x00 };
4054 unsigned int i;
4055 int tmp;
4056 u32 val;
4057
4058 /* Initialise GPIO-connevted stuff */
4059 gpio_inout(0xffffff, (1<<13));
4060 gpio_write(0);
4061 udelay(3);
4062 gpio_write(1<<13);
4063 /* GPIO inputs are pulled up, so no need to drive
4064 * reset pin any longer */
4065 gpio_bits(0xffffff, 0);
4066 if (bttv_gpio)
4067 bttv_gpio_tracking(btv,"pxc200");
4068
4069 /* we could/should try and reset/control the AD pots? but
4070 right now we simply turned off the crushing. Without
4071 this the AGC drifts drifts
4072 remember the EN is reverse logic -->
4073 setting BT848_ADC_AGC_EN disable the AGC
4074 tboult@eecs.lehigh.edu
4075 */
4076
4077 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4078
4079 /* Initialise MAX517 DAC */
4080 pr_info("Setting DAC reference voltage level ...\n");
4081 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4082
4083 /* Initialise 12C508 PIC */
4084 /* The I2CWrite and I2CRead commmands are actually to the
4085 * same chips - but the R/W bit is included in the address
4086 * argument so the numbers are different */
4087
4088
4089 pr_info("Initialising 12C508 PIC chip ...\n");
4090
4091 /* First of all, enable the clock line. This is used in the PXC200-F */
4092 val = btread(BT848_GPIO_DMA_CTL);
4093 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4094 btwrite(val, BT848_GPIO_DMA_CTL);
4095
4096 /* Then, push to 0 the reset pin long enough to reset the *
4097 * device same as above for the reset line, but not the same
4098 * value sent to the GPIO-connected stuff
4099 * which one is the good one? */
4100 gpio_inout(0xffffff,(1<<2));
4101 gpio_write(0);
4102 udelay(10);
4103 gpio_write(1<<2);
4104
4105 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4106 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4107 if (tmp != -1) {
4108 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4109 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4110 }
4111 }
4112
4113 pr_info("PXC200 Initialised\n");
4114 }
4115
4116
4117
4118 /* ----------------------------------------------------------------------- */
4119 /*
4120 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4121 * it. This apparently involves the following procedure for each 878 chip:
4122 *
4123 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4124 *
4125 * 2) write to GPIO_DATA
4126 * - 0x0E
4127 * - sleep 1ms
4128 * - 0x10 + 0x0E
4129 * - sleep 10ms
4130 * - 0x0E
4131 * read from GPIO_DATA into buf (uint_32)
4132 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4133 * error. ERROR_CPLD_Check_Failed stop.
4134 *
4135 * 3) write to GPIO_DATA
4136 * - write 0x4400 + 0x0E
4137 * - sleep 10ms
4138 * - write 0x4410 + 0x0E
4139 * - sleep 1ms
4140 * - write 0x0E
4141 * read from GPIO_DATA into buf (uint_32)
4142 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4143 * error. ERROR_CPLD_Check_Failed.
4144 */
4145 /* ----------------------------------------------------------------------- */
4146 static void
4147 init_RTV24 (struct bttv *btv)
4148 {
4149 uint32_t dataRead = 0;
4150 long watchdog_value = 0x0E;
4151
4152 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4153 btv->c.nr);
4154
4155 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4156
4157 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4158 msleep (1);
4159 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4160 msleep (10);
4161 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4162
4163 dataRead = btread (BT848_GPIO_DATA);
4164
4165 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4166 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4167 btv->c.nr, dataRead);
4168 }
4169
4170 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4171 msleep (10);
4172 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4173 msleep (1);
4174 btwrite (watchdog_value, BT848_GPIO_DATA);
4175 msleep (1);
4176 dataRead = btread (BT848_GPIO_DATA);
4177
4178 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4179 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4180 btv->c.nr, dataRead);
4181
4182 return;
4183 }
4184
4185 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4186 }
4187
4188
4189
4190 /* ----------------------------------------------------------------------- */
4191 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4192 /*
4193 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4194 * This code is placed under the terms of the GNU General Public License
4195 *
4196 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4197 */
4198
4199 static void bus_low(struct bttv *btv, int bit)
4200 {
4201 if (btv->mbox_ior) {
4202 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4203 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4204 udelay(5);
4205 }
4206
4207 gpio_bits(bit,0);
4208 udelay(5);
4209
4210 if (btv->mbox_ior) {
4211 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4212 udelay(5);
4213 }
4214 }
4215
4216 static void bus_high(struct bttv *btv, int bit)
4217 {
4218 if (btv->mbox_ior) {
4219 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4220 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4221 udelay(5);
4222 }
4223
4224 gpio_bits(bit,bit);
4225 udelay(5);
4226
4227 if (btv->mbox_ior) {
4228 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4229 udelay(5);
4230 }
4231 }
4232
4233 static int bus_in(struct bttv *btv, int bit)
4234 {
4235 if (btv->mbox_ior) {
4236 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4237 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4238 udelay(5);
4239
4240 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4241 udelay(5);
4242 }
4243 return gpio_read() & (bit);
4244 }
4245
4246 /* TEA5757 register bits */
4247 #define TEA_FREQ 0:14
4248 #define TEA_BUFFER 15:15
4249
4250 #define TEA_SIGNAL_STRENGTH 16:17
4251
4252 #define TEA_PORT1 18:18
4253 #define TEA_PORT0 19:19
4254
4255 #define TEA_BAND 20:21
4256 #define TEA_BAND_FM 0
4257 #define TEA_BAND_MW 1
4258 #define TEA_BAND_LW 2
4259 #define TEA_BAND_SW 3
4260
4261 #define TEA_MONO 22:22
4262 #define TEA_ALLOW_STEREO 0
4263 #define TEA_FORCE_MONO 1
4264
4265 #define TEA_SEARCH_DIRECTION 23:23
4266 #define TEA_SEARCH_DOWN 0
4267 #define TEA_SEARCH_UP 1
4268
4269 #define TEA_STATUS 24:24
4270 #define TEA_STATUS_TUNED 0
4271 #define TEA_STATUS_SEARCHING 1
4272
4273 /* Low-level stuff */
4274 static int tea5757_read(struct bttv *btv)
4275 {
4276 unsigned long timeout;
4277 int value = 0;
4278 int i;
4279
4280 /* better safe than sorry */
4281 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4282
4283 if (btv->mbox_ior) {
4284 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4285 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4286 udelay(5);
4287 }
4288
4289 if (bttv_gpio)
4290 bttv_gpio_tracking(btv,"tea5757 read");
4291
4292 bus_low(btv,btv->mbox_we);
4293 bus_low(btv,btv->mbox_clk);
4294
4295 udelay(10);
4296 timeout= jiffies + msecs_to_jiffies(1000);
4297
4298 /* wait for DATA line to go low; error if it doesn't */
4299 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4300 schedule();
4301 if (bus_in(btv,btv->mbox_data)) {
4302 pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
4303 return -1;
4304 }
4305
4306 dprintk("%d: tea5757:", btv->c.nr);
4307 for (i = 0; i < 24; i++) {
4308 udelay(5);
4309 bus_high(btv,btv->mbox_clk);
4310 udelay(5);
4311 dprintk_cont("%c",
4312 bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
4313 bus_low(btv,btv->mbox_clk);
4314 value <<= 1;
4315 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4316 dprintk_cont("%c",
4317 bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
4318 }
4319 dprintk_cont("\n");
4320 dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
4321 return value;
4322 }
4323
4324 static int tea5757_write(struct bttv *btv, int value)
4325 {
4326 int i;
4327 int reg = value;
4328
4329 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4330
4331 if (btv->mbox_ior) {
4332 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4333 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4334 udelay(5);
4335 }
4336 if (bttv_gpio)
4337 bttv_gpio_tracking(btv,"tea5757 write");
4338
4339 dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
4340 bus_low(btv,btv->mbox_clk);
4341 bus_high(btv,btv->mbox_we);
4342 for (i = 0; i < 25; i++) {
4343 if (reg & 0x1000000)
4344 bus_high(btv,btv->mbox_data);
4345 else
4346 bus_low(btv,btv->mbox_data);
4347 reg <<= 1;
4348 bus_high(btv,btv->mbox_clk);
4349 udelay(10);
4350 bus_low(btv,btv->mbox_clk);
4351 udelay(10);
4352 }
4353 bus_low(btv,btv->mbox_we); /* unmute !!! */
4354 return 0;
4355 }
4356
4357 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4358 {
4359 dprintk("tea5757_set_freq %d\n",freq);
4360 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4361 }
4362
4363 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4364 *
4365 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4366 * switch instead (CD22M3494E). This IC can have multiple active connections
4367 * between Xn (input) and Yn (output) pins. We need to clear any existing
4368 * connection prior to establish a new one, pulsing the STROBE pin.
4369 *
4370 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4371 * GPIO pins are wired as:
4372 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4373 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4374 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4375 * GPIO[8] - - P3[5] (microcontroller)
4376 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4377 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4378 * GPINTR - - P3[4] (microcontroller)
4379 *
4380 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4381 * configuration either directly (as we are doing) or using the microcontroller
4382 * which is also wired to I2C interface. I have no further info on the
4383 * microcontroller features, one would need to disassembly the firmware.
4384 * note: the vendor refused to give any information on this product, all
4385 * that stuff was found using a multimeter! :)
4386 */
4387 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4388 {
4389 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4390 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4391
4392 gpio_bits(0x07f, muxgpio[input]);
4393
4394 /* reset all conections */
4395 gpio_bits(0x200,0x200);
4396 mdelay(1);
4397 gpio_bits(0x200,0x000);
4398 mdelay(1);
4399
4400 /* create a new connection */
4401 gpio_bits(0x480,0x480);
4402 mdelay(1);
4403 gpio_bits(0x480,0x080);
4404 mdelay(1);
4405 }
4406
4407 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4408 *
4409 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4410 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4411 * chips, ten eight input analog multiplexors, a not chip and a few
4412 * other components.
4413 *
4414 * 16 inputs on a secondary bracket are provided and can be selected
4415 * from each of the four capture chips. Two of the eight input
4416 * multiplexors are used to select from any of the 16 input signals.
4417 *
4418 * Unsupported hardware capabilities:
4419 * . A video output monitor on the secondary bracket can be selected from
4420 * one of the 878A chips.
4421 * . Another passthrough but I haven't spent any time investigating it.
4422 * . Digital I/O (logic level connected to GPIO) is available from an
4423 * onboard header.
4424 *
4425 * The on chip input mux should always be set to 2.
4426 * GPIO[16:19] - Video input selection
4427 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4428 * GPIO[?:?] - Digital I/O.
4429 *
4430 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4431 * determined what function (if any) it provides. With the microcontroller
4432 * and sync separator chips a guess is that it might have to do with video
4433 * switching and maybe some digital I/O.
4434 */
4435 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4436 {
4437 /* video mux */
4438 gpio_bits(0x0f0000, input << 16);
4439 }
4440
4441 static void tibetCS16_init(struct bttv *btv)
4442 {
4443 /* enable gpio bits, mask obtained via btSpy */
4444 gpio_inout(0xffffff, 0x0f7fff);
4445 gpio_write(0x0f7fff);
4446 }
4447
4448 /*
4449 * The following routines for the Kodicom-4400r get a little mind-twisting.
4450 * There is a "master" controller and three "slave" controllers, together
4451 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4452 * The analog switch is controlled by the "master", but the detection order
4453 * of the four BT878A chips is in an order which I just don't understand.
4454 * The "master" is actually the second controller to be detected. The
4455 * logic on the board uses logical numbers for the 4 controllers, but
4456 * those numbers are different from the detection sequence. When working
4457 * with the analog switch, we need to "map" from the detection sequence
4458 * over to the board's logical controller number. This mapping sequence
4459 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4460 * unit 3, the second (which is the master) is logical unit 0, etc.
4461 * We need to maintain the status of the analog switch (which of the 16
4462 * cameras is connected to which of the 4 controllers). Rather than
4463 * add to the bttv structure for this, we use the data reserved for
4464 * the mbox (unused for this card type).
4465 */
4466
4467 /*
4468 * First a routine to set the analog switch, which controls which camera
4469 * is routed to which controller. The switch comprises an X-address
4470 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4471 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4472 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4473 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4474 * specified address. The idea is to set the address and data, then bring
4475 * STROBE high, and finally bring STROBE back to low.
4476 */
4477 static void kodicom4400r_write(struct bttv *btv,
4478 unsigned char xaddr,
4479 unsigned char yaddr,
4480 unsigned char data) {
4481 unsigned int udata;
4482
4483 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4484 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4485 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4486 gpio_bits(0x1ff, udata); /* strobe low */
4487 }
4488
4489 /*
4490 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4491 * use this routine. The routine finds the "master" for the card, maps
4492 * the controller number from the detected position over to the logical
4493 * number, writes the appropriate data to the analog switch, and housekeeps
4494 * the local copy of the switch information. The parameter 'input' is the
4495 * requested camera number (0 - 15).
4496 */
4497 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4498 {
4499 char *sw_status;
4500 int xaddr, yaddr;
4501 struct bttv *mctlr;
4502 static unsigned char map[4] = {3, 0, 2, 1};
4503
4504 mctlr = master[btv->c.nr];
4505 if (mctlr == NULL) { /* ignore if master not yet detected */
4506 return;
4507 }
4508 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4509 yaddr = map[yaddr];
4510 sw_status = (char *)(&mctlr->mbox_we);
4511 xaddr = input & 0xf;
4512 /* Check if the controller/camera pair has changed, else ignore */
4513 if (sw_status[yaddr] != xaddr)
4514 {
4515 /* "open" the old switch, "close" the new one, save the new */
4516 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4517 sw_status[yaddr] = xaddr;
4518 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4519 }
4520 }
4521
4522 /*
4523 * During initialisation, we need to reset the analog switch. We
4524 * also preset the switch to map the 4 connectors on the card to the
4525 * *user's* (see above description of kodicom4400r_muxsel) channels
4526 * 0 through 3
4527 */
4528 static void kodicom4400r_init(struct bttv *btv)
4529 {
4530 char *sw_status = (char *)(&btv->mbox_we);
4531 int ix;
4532
4533 gpio_inout(0x0003ff, 0x0003ff);
4534 gpio_write(1 << 9); /* reset MUX */
4535 gpio_write(0);
4536 /* Preset camera 0 to the 4 controllers */
4537 for (ix = 0; ix < 4; ix++) {
4538 sw_status[ix] = ix;
4539 kodicom4400r_write(btv, ix, ix, 1);
4540 }
4541 /*
4542 * Since this is the "master", we need to set up the
4543 * other three controller chips' pointers to this structure
4544 * for later use in the muxsel routine.
4545 */
4546 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4547 return;
4548 master[btv->c.nr-1] = btv;
4549 master[btv->c.nr] = btv;
4550 master[btv->c.nr+1] = btv;
4551 master[btv->c.nr+2] = btv;
4552 }
4553
4554 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4555 * video multiplexers to provide up to 16 video inputs. These
4556 * multiplexers are controlled by the lower 8 GPIO pins of the
4557 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4558
4559 * xxx0 is pin xxx of multiplexer U5,
4560 * yyy1 is pin yyy of multiplexer U2
4561 */
4562 #define ENA0 0x01
4563 #define ENB0 0x02
4564 #define ENA1 0x04
4565 #define ENB1 0x08
4566
4567 #define IN10 0x10
4568 #define IN00 0x20
4569 #define IN11 0x40
4570 #define IN01 0x80
4571
4572 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4573 {
4574 static const int masks[] = {
4575 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4576 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4577 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4578 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4579 };
4580 gpio_write(masks[input%16]);
4581 }
4582 static void picolo_tetra_init(struct bttv *btv)
4583 {
4584 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4585 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4586 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4587 }
4588 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4589 {
4590
4591 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
4592 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4593 /*GPIO[20]&GPIO[21] used to choose the right input*/
4594 btwrite (input<<20,BT848_GPIO_DATA);
4595
4596 }
4597
4598 /*
4599 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4600 *
4601 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4602 * swichers to provide 16 channels to MUX0. The TDA8540's have
4603 * 4 independent outputs and as such the IVC120G also has the
4604 * optional "Monitor Out" bus. This allows the card to be looking
4605 * at one input while the monitor is looking at another.
4606 *
4607 * Since I've couldn't be bothered figuring out how to add an
4608 * independent muxsel for the monitor bus, I've just set it to
4609 * whatever the card is looking at.
4610 *
4611 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4612 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4613 *
4614 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4615 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4616 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4617 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4618 *
4619 */
4620
4621 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4622 #define I2C_TDA8540 0x90
4623 #define I2C_TDA8540_ALT1 0x92
4624 #define I2C_TDA8540_ALT2 0x94
4625 #define I2C_TDA8540_ALT3 0x96
4626 #define I2C_TDA8540_ALT4 0x98
4627 #define I2C_TDA8540_ALT5 0x9a
4628 #define I2C_TDA8540_ALT6 0x9c
4629
4630 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4631 {
4632 /* Simple maths */
4633 int key = input % 4;
4634 int matrix = input / 4;
4635
4636 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4637 btv->c.nr, input, matrix, key);
4638
4639 /* Handles the input selection on the TDA8540's */
4640 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4641 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4642 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4643 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4644 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4645 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4646 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4647 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4648
4649 /* Handles the output enables on the TDA8540's */
4650 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4651 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4652 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4653 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4654 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4655 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4656 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4657 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4658
4659 /* 878's MUX0 is already selected for input via muxsel values */
4660 }
4661
4662
4663 /* PXC200 muxsel helper
4664 * luke@syseng.anu.edu.au
4665 * another transplant
4666 * from Alessandro Rubini (rubini@linux.it)
4667 *
4668 * There are 4 kinds of cards:
4669 * PXC200L which is bt848
4670 * PXC200F which is bt848 with PIC controlling mux
4671 * PXC200AL which is bt878
4672 * PXC200AF which is bt878 with PIC controlling mux
4673 */
4674 #define PX_CFG_PXC200F 0x01
4675 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4676 #define PX_I2C_PIC 0x0f
4677 #define PX_PXC200A_CARDID 0x200a1295
4678 #define PX_I2C_CMD_CFG 0x00
4679
4680 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4681 {
4682 int rc;
4683 long mux;
4684 int bitmask;
4685 unsigned char buf[2];
4686
4687 /* Read PIC config to determine if this is a PXC200F */
4688 /* PX_I2C_CMD_CFG*/
4689 buf[0]=0;
4690 buf[1]=0;
4691 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4692 if (rc) {
4693 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4694 btv->c.nr, rc);
4695 /* not PXC ? do nothing */
4696 return;
4697 }
4698
4699 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4700 if (!(rc & PX_CFG_PXC200F)) {
4701 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4702 btv->c.nr, rc);
4703 return;
4704 }
4705
4706
4707 /* The multiplexer in the 200F is handled by the GPIO port */
4708 /* get correct mapping between inputs */
4709 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4710 /* ** not needed!? */
4711 mux = input;
4712
4713 /* make sure output pins are enabled */
4714 /* bitmask=0x30f; */
4715 bitmask=0x302;
4716 /* check whether we have a PXC200A */
4717 if (btv->cardid == PX_PXC200A_CARDID) {
4718 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4719 bitmask |= 7<<4; /* the DAC */
4720 }
4721 btwrite(bitmask, BT848_GPIO_OUT_EN);
4722
4723 bitmask = btread(BT848_GPIO_DATA);
4724 if (btv->cardid == PX_PXC200A_CARDID)
4725 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4726 else /* older device */
4727 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4728 btwrite(bitmask,BT848_GPIO_DATA);
4729
4730 /*
4731 * Was "to be safe, set the bt848 to input 0"
4732 * Actually, since it's ok at load time, better not messing
4733 * with these bits (on PXC200AF you need to set mux 2 here)
4734 *
4735 * needed because bttv-driver sets mux before calling this function
4736 */
4737 if (btv->cardid == PX_PXC200A_CARDID)
4738 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4739 else /* older device */
4740 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4741
4742 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4743 }
4744
4745 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4746 {
4747 unsigned int mux = input % 4;
4748
4749 if (input == btv->svhs)
4750 mux = 0;
4751
4752 gpio_bits(0x3, mux);
4753 }
4754
4755 /*
4756 * GeoVision GV-800(S) functions
4757 * Bruno Christo <bchristo@inf.ufsm.br>
4758 */
4759
4760 /* This is a function to control the analog switch, which determines which
4761 * camera is routed to which controller. The switch comprises an X-address
4762 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4763 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4764 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4765 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4766 * specified address. There is also a chip select (gpio bit 16).
4767 * The idea is to set the address and chip select together, bring
4768 * STROBE high, write the data, and finally bring STROBE back to low.
4769 */
4770 static void gv800s_write(struct bttv *btv,
4771 unsigned char xaddr,
4772 unsigned char yaddr,
4773 unsigned char data) {
4774 /* On the "master" 878A:
4775 * GPIO bits 0-9 are used for the analog switch:
4776 * 00 - 03: camera selector
4777 * 04 - 06: 878A (controller) selector
4778 * 16: cselect
4779 * 17: strobe
4780 * 18: data (1->on, 0->off)
4781 * 19: reset
4782 */
4783 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4784 const u32 CSELECT = 1<<16;
4785 const u32 STROBE = 1<<17;
4786 const u32 DATA = data<<18;
4787
4788 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4789 gpio_bits(0x20000, STROBE); /* STROBE high */
4790 gpio_bits(0x40000, DATA); /* write DATA */
4791 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4792 }
4793
4794 /*
4795 * GeoVision GV-800(S) muxsel
4796 *
4797 * Each of the 4 cards (controllers) use this function.
4798 * The controller using this function selects the input through the GPIO pins
4799 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4800 *
4801 * The parameter 'input' is the requested camera number (0-4) on the controller.
4802 * The map array has the address of each input. Note that the addresses in the
4803 * array are in the sequence the original GeoVision driver uses, that is, set
4804 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4805 * the physical "camera 1" connector corresponds to controller 0 input 0,
4806 * "camera 2" corresponds to controller 1 input 0, and so on.
4807 *
4808 * After getting the input address, the function then writes the appropriate
4809 * data to the analog switch, and housekeeps the local copy of the switch
4810 * information.
4811 */
4812 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4813 {
4814 struct bttv *mctlr;
4815 char *sw_status;
4816 int xaddr, yaddr;
4817 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4818 { 0x1, 0x5, 0xb, 0x7 },
4819 { 0x2, 0x8, 0xc, 0xe },
4820 { 0x3, 0x9, 0xd, 0xf } };
4821 input = input%4;
4822 mctlr = master[btv->c.nr];
4823 if (mctlr == NULL) {
4824 /* do nothing until the "master" is detected */
4825 return;
4826 }
4827 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4828 sw_status = (char *)(&mctlr->mbox_we);
4829 xaddr = map[yaddr][input] & 0xf;
4830
4831 /* Check if the controller/camera pair has changed, ignore otherwise */
4832 if (sw_status[yaddr] != xaddr) {
4833 /* disable the old switch, enable the new one and save status */
4834 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4835 sw_status[yaddr] = xaddr;
4836 gv800s_write(mctlr, xaddr, yaddr, 1);
4837 }
4838 }
4839
4840 /* GeoVision GV-800(S) "master" chip init */
4841 static void gv800s_init(struct bttv *btv)
4842 {
4843 char *sw_status = (char *)(&btv->mbox_we);
4844 int ix;
4845
4846 gpio_inout(0xf107f, 0xf107f);
4847 gpio_write(1<<19); /* reset the analog MUX */
4848 gpio_write(0);
4849
4850 /* Preset camera 0 to the 4 controllers */
4851 for (ix = 0; ix < 4; ix++) {
4852 sw_status[ix] = ix;
4853 gv800s_write(btv, ix, ix, 1);
4854 }
4855
4856 /* Inputs on the "master" controller need this brightness fix */
4857 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4858
4859 if (btv->c.nr > BTTV_MAX-4)
4860 return;
4861 /*
4862 * Store the "master" controller pointer in the master
4863 * array for later use in the muxsel function.
4864 */
4865 master[btv->c.nr] = btv;
4866 master[btv->c.nr+1] = btv;
4867 master[btv->c.nr+2] = btv;
4868 master[btv->c.nr+3] = btv;
4869 }
4870
4871 /* ----------------------------------------------------------------------- */
4872 /* motherboard chipset specific stuff */
4873
4874 void __init bttv_check_chipset(void)
4875 {
4876 int pcipci_fail = 0;
4877 struct pci_dev *dev = NULL;
4878
4879 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4880 pcipci_fail = 1;
4881 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4882 triton1 = 1;
4883 if (pci_pci_problems & PCIPCI_VSFX)
4884 vsfx = 1;
4885 #ifdef PCIPCI_ALIMAGIK
4886 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4887 latency = 0x0A;
4888 #endif
4889
4890
4891 /* print warnings about any quirks found */
4892 if (triton1)
4893 pr_info("Host bridge needs ETBF enabled\n");
4894 if (vsfx)
4895 pr_info("Host bridge needs VSFX enabled\n");
4896 if (pcipci_fail) {
4897 pr_info("bttv and your chipset may not work together\n");
4898 if (!no_overlay) {
4899 pr_info("overlay will be disabled\n");
4900 no_overlay = 1;
4901 } else {
4902 pr_info("overlay forced. Use this option at your own risk.\n");
4903 }
4904 }
4905 if (UNSET != latency)
4906 pr_info("pci latency fixup [%d]\n", latency);
4907 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4908 PCI_DEVICE_ID_INTEL_82441, dev))) {
4909 unsigned char b;
4910 pci_read_config_byte(dev, 0x53, &b);
4911 if (bttv_debug)
4912 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4913 b);
4914 }
4915 }
4916
4917 int __devinit bttv_handle_chipset(struct bttv *btv)
4918 {
4919 unsigned char command;
4920
4921 if (!triton1 && !vsfx && UNSET == latency)
4922 return 0;
4923
4924 if (bttv_verbose) {
4925 if (triton1)
4926 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4927 btv->c.nr);
4928 if (vsfx && btv->id >= 878)
4929 pr_info("%d: enabling VSFX\n", btv->c.nr);
4930 if (UNSET != latency)
4931 pr_info("%d: setting pci timer to %d\n",
4932 btv->c.nr, latency);
4933 }
4934
4935 if (btv->id < 878) {
4936 /* bt848 (mis)uses a bit in the irq mask for etbf */
4937 if (triton1)
4938 btv->triton1 = BT848_INT_ETBF;
4939 } else {
4940 /* bt878 has a bit in the pci config space for it */
4941 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4942 if (triton1)
4943 command |= BT878_EN_TBFX;
4944 if (vsfx)
4945 command |= BT878_EN_VSFX;
4946 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4947 }
4948 if (UNSET != latency)
4949 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4950 return 0;
4951 }
4952
4953
4954 /*
4955 * Local variables:
4956 * c-basic-offset: 8
4957 * End:
4958 */
Linux kernel - Deliverables
This page took 0.151682 seconds and 5 git commands to generate.