5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/config.h>
29 #include <linux/delay.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
43 static void boot_msp34xx(struct bttv
*btv
, int pin
);
44 static void boot_bt832(struct bttv
*btv
);
45 static void hauppauge_eeprom(struct bttv
*btv
);
46 static void avermedia_eeprom(struct bttv
*btv
);
47 static void osprey_eeprom(struct bttv
*btv
);
48 static void modtec_eeprom(struct bttv
*btv
);
49 static void init_PXC200(struct bttv
*btv
);
50 static void init_RTV24(struct bttv
*btv
);
52 static void winview_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
53 static void lt9415_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
54 static void avermedia_tvphone_audio(struct bttv
*btv
, struct video_audio
*v
,
56 static void avermedia_tv_stereo_audio(struct bttv
*btv
, struct video_audio
*v
,
58 static void terratv_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
59 static void gvbctv3pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
60 static void gvbctv5pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
61 static void winfast2000_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
62 static void pvbt878p9b_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
63 static void fv2000s_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
64 static void windvr_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
65 static void adtvk503_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
66 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
);
67 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
);
68 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
);
69 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
);
70 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
);
72 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
);
74 static void picolo_tetra_muxsel(struct bttv
*btv
, unsigned int input
);
75 static void picolo_tetra_init(struct bttv
*btv
);
77 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
);
78 static void tibetCS16_init(struct bttv
*btv
);
80 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
);
81 static void kodicom4400r_init(struct bttv
*btv
);
83 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
);
84 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
);
86 static int terratec_active_radio_upgrade(struct bttv
*btv
);
87 static int tea5757_read(struct bttv
*btv
);
88 static int tea5757_write(struct bttv
*btv
, int value
);
89 static void identify_by_eeprom(struct bttv
*btv
,
90 unsigned char eeprom_data
[256]);
91 static int __devinit
pvr_boot(struct bttv
*btv
);
93 /* config variables */
94 static unsigned int triton1
=0;
95 static unsigned int vsfx
=0;
96 static unsigned int latency
= UNSET
;
99 static unsigned int card
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
100 static unsigned int pll
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
101 static unsigned int tuner
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
102 static unsigned int svhs
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
103 static unsigned int remote
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
104 static struct bttv
*master
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = NULL
};
106 static unsigned int autoload
= 1;
108 static unsigned int autoload
= 0;
110 static unsigned int gpiomask
= UNSET
;
111 static unsigned int audioall
= UNSET
;
112 static unsigned int audiomux
[5] = { [ 0 ... 4 ] = UNSET
};
115 module_param(triton1
, int, 0444);
116 module_param(vsfx
, int, 0444);
117 module_param(no_overlay
, int, 0444);
118 module_param(latency
, int, 0444);
119 module_param(gpiomask
, int, 0444);
120 module_param(audioall
, int, 0444);
121 module_param(autoload
, int, 0444);
123 module_param_array(card
, int, NULL
, 0444);
124 module_param_array(pll
, int, NULL
, 0444);
125 module_param_array(tuner
, int, NULL
, 0444);
126 module_param_array(svhs
, int, NULL
, 0444);
127 module_param_array(remote
, int, NULL
, 0444);
128 module_param_array(audiomux
, int, NULL
, 0444);
130 MODULE_PARM_DESC(triton1
,"set ETBF pci config bit "
131 "[enable bug compatibility for triton1 + others]");
132 MODULE_PARM_DESC(vsfx
,"set VSFX pci config bit "
133 "[yet another chipset flaw workaround]");
134 MODULE_PARM_DESC(latency
,"pci latency timer");
135 MODULE_PARM_DESC(card
,"specify TV/grabber card model, see CARDLIST file for a list");
136 MODULE_PARM_DESC(pll
,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
137 MODULE_PARM_DESC(tuner
,"specify installed tuner type");
138 MODULE_PARM_DESC(autoload
,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 /* ----------------------------------------------------------------------- */
141 /* list of card IDs for bt878+ cards */
147 } cards
[] __devinitdata
= {
148 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878
, "Hauppauge WinTV" },
149 { 0x39000070, BTTV_BOARD_HAUPPAUGE878
, "Hauppauge WinTV-D" },
150 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR
, "Hauppauge WinTV/PVR" },
151 { 0xff000070, BTTV_BOARD_OSPREY1x0
, "Osprey-100" },
152 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID
,"Osprey-200" },
153 { 0xff020070, BTTV_BOARD_OSPREY500
, "Osprey-500" },
154 { 0xff030070, BTTV_BOARD_OSPREY2000
, "Osprey-2000" },
155 { 0xff040070, BTTV_BOARD_OSPREY540
, "Osprey-540" },
156 { 0xff070070, BTTV_BOARD_OSPREY440
, "Osprey-440" },
158 { 0x00011002, BTTV_BOARD_ATI_TVWONDER
, "ATI TV Wonder" },
159 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE
,"ATI TV Wonder/VE" },
161 { 0x6606107d, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
162 { 0x6607107d, BTTV_BOARD_WINFASTVC100
, "Leadtek WinFast VC 100" },
163 { 0x6609107d, BTTV_BOARD_WINFAST2000
, "Leadtek TV 2000 XP" },
164 { 0x263610b4, BTTV_BOARD_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
165 { 0x264510b4, BTTV_BOARD_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
166 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI
, "I-O Data Co. GV-BCTV3/PCI" },
167 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI
, "I-O Data Co. GV-BCTV4/PCI" },
168 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
169 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
171 { 0x001211bd, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV" },
172 /* some cards ship with byteswapped IDs ... */
173 { 0x1200bd11, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV [bswap]" },
174 { 0xff00bd11, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV [bswap]" },
175 /* this seems to happen as well ... */
176 { 0xff1211bd, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV" },
178 { 0x3000121a, BTTV_BOARD_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
179 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
180 { 0x3060121a, BTTV_BOARD_STB2
, "3Dfx VoodooTV 100/ STB OEM" },
182 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063
, "(Askey Magic/others) TView99 CPH06x" },
183 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063
, "CPH06X TView99-Card" },
184 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH05x" },
185 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
186 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061
, "Askey CPH050" },
187 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061
, "TView 99 (CPH061)" },
188 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS
, "Phoebe TV Master (CPH060)" },
190 { 0x00011461, BTTV_BOARD_AVPHONE98
, "AVerMedia TVPhone98" },
191 { 0x00021461, BTTV_BOARD_AVERMEDIA98
, "AVermedia TVCapture 98" },
192 { 0x00031461, BTTV_BOARD_AVPHONE98
, "AVerMedia TVPhone98" },
193 { 0x00041461, BTTV_BOARD_AVERMEDIA98
, "AVerMedia TVCapture 98" },
194 { 0x03001461, BTTV_BOARD_AVERMEDIA98
, "VDOMATE TV TUNER CARD" },
196 { 0x1117153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Philips PAL B/G)" },
197 { 0x1118153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Temic PAL B/G)" },
198 { 0x1119153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Philips PAL I)" },
199 { 0x111a153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Temic PAL I)" },
201 { 0x1123153b, BTTV_BOARD_TERRATVRADIO
, "Terratec TV Radio+" },
202 { 0x1127153b, BTTV_BOARD_TERRATV
, "Terratec TV+ (V1.05)" },
203 /* clashes with FlyVideo
204 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
205 { 0x1134153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (LR102)" },
206 { 0x1135153b, BTTV_BOARD_TERRATVALUER
, "Terratec TValue Radio" }, /* LR102 */
207 { 0x5018153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue" }, /* ?? */
208 { 0xff3b153b, BTTV_BOARD_TERRATVALUER
, "Terratec TValue Radio" }, /* ?? */
210 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
211 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
212 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
213 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
214 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
216 { 0x1430aa00, BTTV_BOARD_PV143
, "Provideo PV143A" },
217 { 0x1431aa00, BTTV_BOARD_PV143
, "Provideo PV143B" },
218 { 0x1432aa00, BTTV_BOARD_PV143
, "Provideo PV143C" },
219 { 0x1433aa00, BTTV_BOARD_PV143
, "Provideo PV143D" },
220 { 0x1433aa03, BTTV_BOARD_PV143
, "Security Eyes" },
222 { 0x1460aa00, BTTV_BOARD_PV150
, "Provideo PV150A-1" },
223 { 0x1461aa01, BTTV_BOARD_PV150
, "Provideo PV150A-2" },
224 { 0x1462aa02, BTTV_BOARD_PV150
, "Provideo PV150A-3" },
225 { 0x1463aa03, BTTV_BOARD_PV150
, "Provideo PV150A-4" },
227 { 0x1464aa04, BTTV_BOARD_PV150
, "Provideo PV150B-1" },
228 { 0x1465aa05, BTTV_BOARD_PV150
, "Provideo PV150B-2" },
229 { 0x1466aa06, BTTV_BOARD_PV150
, "Provideo PV150B-3" },
230 { 0x1467aa07, BTTV_BOARD_PV150
, "Provideo PV150B-4" },
232 { 0xa132ff00, BTTV_BOARD_IVC100
, "IVC-100" },
233 { 0xa1550000, BTTV_BOARD_IVC200
, "IVC-200" },
234 { 0xa1550001, BTTV_BOARD_IVC200
, "IVC-200" },
235 { 0xa1550002, BTTV_BOARD_IVC200
, "IVC-200" },
236 { 0xa1550003, BTTV_BOARD_IVC200
, "IVC-200" },
237 { 0xa1550100, BTTV_BOARD_IVC200
, "IVC-200G" },
238 { 0xa1550101, BTTV_BOARD_IVC200
, "IVC-200G" },
239 { 0xa1550102, BTTV_BOARD_IVC200
, "IVC-200G" },
240 { 0xa1550103, BTTV_BOARD_IVC200
, "IVC-200G" },
241 { 0xa182ff00, BTTV_BOARD_IVC120
, "IVC-120G" },
242 { 0xa182ff01, BTTV_BOARD_IVC120
, "IVC-120G" },
243 { 0xa182ff02, BTTV_BOARD_IVC120
, "IVC-120G" },
244 { 0xa182ff03, BTTV_BOARD_IVC120
, "IVC-120G" },
245 { 0xa182ff04, BTTV_BOARD_IVC120
, "IVC-120G" },
246 { 0xa182ff05, BTTV_BOARD_IVC120
, "IVC-120G" },
247 { 0xa182ff06, BTTV_BOARD_IVC120
, "IVC-120G" },
248 { 0xa182ff07, BTTV_BOARD_IVC120
, "IVC-120G" },
249 { 0xa182ff08, BTTV_BOARD_IVC120
, "IVC-120G" },
250 { 0xa182ff09, BTTV_BOARD_IVC120
, "IVC-120G" },
251 { 0xa182ff0a, BTTV_BOARD_IVC120
, "IVC-120G" },
252 { 0xa182ff0b, BTTV_BOARD_IVC120
, "IVC-120G" },
253 { 0xa182ff0c, BTTV_BOARD_IVC120
, "IVC-120G" },
254 { 0xa182ff0d, BTTV_BOARD_IVC120
, "IVC-120G" },
255 { 0xa182ff0e, BTTV_BOARD_IVC120
, "IVC-120G" },
256 { 0xa182ff0f, BTTV_BOARD_IVC120
, "IVC-120G" },
258 { 0x41424344, BTTV_BOARD_GRANDTEC
, "GrandTec Multi Capture" },
259 { 0x01020304, BTTV_BOARD_XGUARD
, "Grandtec Grand X-Guard" },
261 { 0x18501851, BTTV_BOARD_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
262 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
263 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ
, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
264 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW
, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
265 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM
, "Lifeview FlyVideo 98 LR50 Rev Q" },
266 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98
, "Lifeview Flyvideo 98" },
268 { 0x010115cb, BTTV_BOARD_GMV1
, "AG GMV1" },
269 { 0x010114c7, BTTV_BOARD_MODTEC_205
, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
271 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878
, "STB ???" },
272 { 0x217d6606, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
273 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
274 { 0x03116000, BTTV_BOARD_SENSORAY311
, "Sensoray 311" },
275 { 0x00790e11, BTTV_BOARD_WINDVR
, "Canopus WinDVR PCI" },
276 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX
, "Face to Face Tvmax" },
277 { 0x20007063, BTTV_BOARD_PC_HDTV
, "pcHDTV HD-2000 TV"},
278 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100
, "SIMUS GVC1100" },
279 { 0x146caa0c, BTTV_BOARD_PV951
, "ituner spectra8" },
280 { 0x200a1295, BTTV_BOARD_PXC200
, "ImageNation PXC200A" },
282 { 0x40111554, BTTV_BOARD_PV_BT878P_9B
, "Prolink Pixelview PV-BT" },
283 { 0x17de0a01, BTTV_BOARD_KWORLD
, "Mecer TV/FM/Video Tuner" },
285 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #1" },
286 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #2" },
287 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #3" },
288 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #4" },
290 { 0x15409511, BTTV_BOARD_ACORP_Y878F
, "Acorp Y878F" },
292 /* likely broken, vendor id doesn't match the other magic views ...
293 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
295 /* DVB cards (using pci function .1 for mpeg data xfer) */
296 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV
, "Nebula Electronics DigiTV" },
297 { 0x07611461, BTTV_BOARD_AVDVBT_761
, "AverMedia AverTV DVB-T 761" },
298 { 0x001c11bd, BTTV_BOARD_PINNACLESAT
, "Pinnacle PCTV Sat" },
299 { 0x002611bd, BTTV_BOARD_TWINHAN_DST
, "Pinnacle PCTV SAT CI" },
300 { 0x00011822, BTTV_BOARD_TWINHAN_DST
, "Twinhan VisionPlus DVB" },
301 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST
, "ChainTech digitop DST-1000 DVB-S" },
302 { 0x07711461, BTTV_BOARD_AVDVBT_771
, "AVermedia AverTV DVB-T 771" },
303 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE
, "DViCO FusionHDTV DVB-T Lite" },
304 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
, "DViCO FusionHDTV 5 Lite" },
309 /* ----------------------------------------------------------------------- */
310 /* array with description for bt848 / bt878 tv/grabber cards */
312 struct tvcard bttv_tvcards
[] = {
313 /* ---- card 0x00 ---------------------------------- */
314 [BTTV_BOARD_UNKNOWN
] = {
315 .name
= " *** UNKNOWN/GENERIC *** ",
320 .muxsel
= { 2, 3, 1, 0},
322 .tuner_addr
= ADDR_UNSET
,
323 .radio_addr
= ADDR_UNSET
,
325 [BTTV_BOARD_MIRO
] = {
332 .muxsel
= { 2, 3, 1, 1},
333 .audiomux
= { 2, 0, 0, 0, 10},
336 .tuner_addr
= ADDR_UNSET
,
337 .radio_addr
= ADDR_UNSET
,
339 [BTTV_BOARD_HAUPPAUGE
] = {
340 .name
= "Hauppauge (bt848)",
346 .muxsel
= { 2, 3, 1, 1},
347 .audiomux
= { 0, 1, 2, 3, 4},
350 .tuner_addr
= ADDR_UNSET
,
351 .radio_addr
= ADDR_UNSET
,
354 .name
= "STB, Gateway P/N 6000699 (bt848)",
360 .muxsel
= { 2, 3, 1, 1},
361 .audiomux
= { 4, 0, 2, 3, 1},
364 .tuner_type
= TUNER_PHILIPS_NTSC
,
365 .tuner_addr
= ADDR_UNSET
,
366 .radio_addr
= ADDR_UNSET
,
371 /* ---- card 0x04 ---------------------------------- */
372 [BTTV_BOARD_INTEL
] = {
373 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
379 .muxsel
= { 2, 3, 1, 1},
383 .tuner_addr
= ADDR_UNSET
,
384 .radio_addr
= ADDR_UNSET
,
386 [BTTV_BOARD_DIAMOND
] = {
387 .name
= "Diamond DTV2000",
393 .muxsel
= { 2, 3, 1, 0},
394 .audiomux
= { 0, 1, 0, 1, 3},
397 .tuner_addr
= ADDR_UNSET
,
398 .radio_addr
= ADDR_UNSET
,
400 [BTTV_BOARD_AVERMEDIA
] = {
401 .name
= "AVerMedia TVPhone",
406 .muxsel
= { 2, 3, 1, 1},
408 .audiomux
= { 0x0c, 0x04, 0x08, 0x04, 0},
409 /* 0x04 for some cards ?? */
412 .tuner_addr
= ADDR_UNSET
,
413 .radio_addr
= ADDR_UNSET
,
414 .audio_hook
= avermedia_tvphone_audio
,
417 [BTTV_BOARD_MATRIX_VISION
] = {
418 .name
= "MATRIX-Vision MV-Delta",
424 .muxsel
= { 2, 3, 1, 0, 0},
428 .tuner_addr
= ADDR_UNSET
,
429 .radio_addr
= ADDR_UNSET
,
432 /* ---- card 0x08 ---------------------------------- */
433 [BTTV_BOARD_FLYVIDEO
] = {
434 .name
= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
440 .muxsel
= { 2, 3, 1, 1},
441 .audiomux
= { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
445 .tuner_addr
= ADDR_UNSET
,
446 .radio_addr
= ADDR_UNSET
,
448 [BTTV_BOARD_TURBOTV
] = {
449 .name
= "IMS/IXmicro TurboTV",
455 .muxsel
= { 2, 3, 1, 1},
456 .audiomux
= { 1, 1, 2, 3, 0},
459 .tuner_type
= TUNER_TEMIC_PAL
,
460 .tuner_addr
= ADDR_UNSET
,
461 .radio_addr
= ADDR_UNSET
,
463 [BTTV_BOARD_HAUPPAUGE878
] = {
464 .name
= "Hauppauge (bt878)",
469 .gpiomask
= 0x0f, /* old: 7 */
470 .muxsel
= { 2, 0, 1, 1},
471 .audiomux
= { 0, 1, 2, 3, 4},
475 .tuner_addr
= ADDR_UNSET
,
476 .radio_addr
= ADDR_UNSET
,
478 [BTTV_BOARD_MIROPRO
] = {
479 .name
= "MIRO PCTV pro",
485 .muxsel
= { 2, 3, 1, 1},
486 .audiomux
= { 0x20001,0x10001, 0, 0,10},
489 .tuner_addr
= ADDR_UNSET
,
490 .radio_addr
= ADDR_UNSET
,
493 /* ---- card 0x0c ---------------------------------- */
494 [BTTV_BOARD_ADSTECH_TV
] = {
495 .name
= "ADS Technologies Channel Surfer TV (bt848)",
501 .muxsel
= { 2, 3, 1, 1},
502 .audiomux
= { 13, 14, 11, 7, 0, 0},
505 .tuner_addr
= ADDR_UNSET
,
506 .radio_addr
= ADDR_UNSET
,
508 [BTTV_BOARD_AVERMEDIA98
] = {
509 .name
= "AVerMedia TVCapture 98",
515 .muxsel
= { 2, 3, 1, 1},
516 .audiomux
= { 13, 14, 11, 7, 0, 0},
520 .tuner_type
= TUNER_PHILIPS_PAL
,
521 .tuner_addr
= ADDR_UNSET
,
522 .radio_addr
= ADDR_UNSET
,
523 .audio_hook
= avermedia_tv_stereo_audio
,
527 .name
= "Aimslab Video Highway Xtreme (VHX)",
533 .muxsel
= { 2, 3, 1, 1},
534 .audiomux
= { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
538 .tuner_addr
= ADDR_UNSET
,
539 .radio_addr
= ADDR_UNSET
,
541 [BTTV_BOARD_ZOLTRIX
] = {
542 .name
= "Zoltrix TV-Max",
548 .muxsel
= { 2, 3, 1, 1},
549 .audiomux
= {0 , 0, 1 , 0, 10},
552 .tuner_addr
= ADDR_UNSET
,
553 .radio_addr
= ADDR_UNSET
,
556 /* ---- card 0x10 ---------------------------------- */
557 [BTTV_BOARD_PIXVIEWPLAYTV
] = {
558 .name
= "Prolink Pixelview PlayTV (bt878)",
563 .gpiomask
= 0x01fe00,
564 .muxsel
= { 2, 3, 1, 1},
567 .audiomux
= { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
569 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
570 .audiomux
= { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
576 [BTTV_BOARD_WINVIEW_601
] = {
577 .name
= "Leadtek WinView 601",
582 .gpiomask
= 0x8300f8,
583 .muxsel
= { 2, 3, 1, 1,0},
584 .audiomux
= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
587 .tuner_addr
= ADDR_UNSET
,
588 .radio_addr
= ADDR_UNSET
,
589 .audio_hook
= winview_audio
,
592 [BTTV_BOARD_AVEC_INTERCAP
] = {
593 .name
= "AVEC Intercapture",
599 .muxsel
= {2, 3, 1, 1},
600 .audiomux
= {1, 0, 0, 0, 0},
603 .tuner_addr
= ADDR_UNSET
,
604 .radio_addr
= ADDR_UNSET
,
606 [BTTV_BOARD_LIFE_FLYKIT
] = {
607 .name
= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
612 .gpiomask
= 0x8dff00,
613 .muxsel
= { 2, 3, 1, 1},
617 .tuner_addr
= ADDR_UNSET
,
618 .radio_addr
= ADDR_UNSET
,
621 /* ---- card 0x14 ---------------------------------- */
622 [BTTV_BOARD_CEI_RAFFLES
] = {
623 .name
= "CEI Raffles Card",
628 .muxsel
= {2, 3, 1, 1},
630 .tuner_addr
= ADDR_UNSET
,
631 .radio_addr
= ADDR_UNSET
,
633 [BTTV_BOARD_CONFERENCETV
] = {
634 .name
= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
636 .audio_inputs
= 2, /* tuner, line in */
640 .muxsel
= { 2, 3, 1, 1},
641 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
643 .tuner_type
= TUNER_PHILIPS_PAL_I
,
644 .tuner_addr
= ADDR_UNSET
,
645 .radio_addr
= ADDR_UNSET
,
647 [BTTV_BOARD_PHOEBE_TVMAS
] = {
648 .name
= "Askey CPH050/ Phoebe Tv Master + FM",
654 .muxsel
= { 2, 3, 1, 1},
655 .audiomux
= {0, 1, 0x800, 0x400, 0xc00, 0},
659 .tuner_addr
= ADDR_UNSET
,
660 .radio_addr
= ADDR_UNSET
,
662 [BTTV_BOARD_MODTEC_205
] = {
663 .name
= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
669 .muxsel
= { 2, 3, -1 },
670 .digital_mode
= DIGITAL_MODE_CAMERA
,
671 .audiomux
= { 0, 0, 0, 0, 0 },
674 .tuner_type
= TUNER_ALPS_TSBB5_PAL_I
,
675 .tuner_addr
= ADDR_UNSET
,
676 .radio_addr
= ADDR_UNSET
,
679 /* ---- card 0x18 ---------------------------------- */
680 [BTTV_BOARD_MAGICTVIEW061
] = {
681 .name
= "Askey CPH05X/06X (bt878) [many vendors]",
687 .muxsel
= { 2, 3, 1, 1},
688 .audiomux
= {0x400, 0x400, 0x400, 0x400, 0xc00},
692 .tuner_addr
= ADDR_UNSET
,
693 .radio_addr
= ADDR_UNSET
,
696 [BTTV_BOARD_VOBIS_BOOSTAR
] = {
697 .name
= "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
702 .gpiomask
= 0x1f0fff,
703 .muxsel
= { 2, 3, 1, 1},
704 .audiomux
= { 0x20000, 0x30000, 0x10000, 0, 0x40000},
706 .tuner_type
= TUNER_PHILIPS_PAL
,
707 .tuner_addr
= ADDR_UNSET
,
708 .radio_addr
= ADDR_UNSET
,
709 .audio_hook
= terratv_audio
,
711 [BTTV_BOARD_HAUPPAUG_WCAM
] = {
712 .name
= "Hauppauge WinCam newer (bt878)",
718 .muxsel
= { 2, 0, 1, 1},
719 .audiomux
= { 0, 1, 2, 3, 4},
722 .tuner_addr
= ADDR_UNSET
,
723 .radio_addr
= ADDR_UNSET
,
725 [BTTV_BOARD_MAXI
] = {
726 .name
= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
732 .muxsel
= { 2, 3, 1, 1},
733 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
735 .tuner_type
= TUNER_PHILIPS_SECAM
,
736 .tuner_addr
= ADDR_UNSET
,
737 .radio_addr
= ADDR_UNSET
,
740 /* ---- card 0x1c ---------------------------------- */
741 [BTTV_BOARD_TERRATV
] = {
742 .name
= "Terratec TerraTV+ Version 1.1 (bt878)",
747 .gpiomask
= 0x1f0fff,
748 .muxsel
= { 2, 3, 1, 1},
749 .audiomux
= { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
751 .tuner_type
= TUNER_PHILIPS_PAL
,
752 .tuner_addr
= ADDR_UNSET
,
753 .radio_addr
= ADDR_UNSET
,
754 .audio_hook
= terratv_audio
,
756 External 20 pin connector (for Active Radio Upgrade board)
762 gpio05: om5610-stereo
766 gpio09+10: nIOR, nSEL ?? (bt878)
770 gpio16: u2-A0 (1st 4052bt)
773 gpio19: u4-A0 (2nd 4052)
777 00000 : Cdrom (internal audio input)
778 10000 : ext. Video audio input
787 [BTTV_BOARD_PXC200
] = {
788 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
789 .name
= "Imagenation PXC200",
793 .svhs
= 1, /* was: 4 */
795 .muxsel
= { 2, 3, 1, 0, 0},
799 .tuner_addr
= ADDR_UNSET
,
800 .radio_addr
= ADDR_UNSET
,
801 .muxsel_hook
= PXC200_muxsel
,
804 [BTTV_BOARD_FLYVIDEO_98
] = {
805 .name
= "Lifeview FlyVideo 98 LR50",
810 .gpiomask
= 0x1800, /* 0x8dfe00 */
811 .muxsel
= { 2, 3, 1, 1},
812 .audiomux
= { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
815 .tuner_addr
= ADDR_UNSET
,
816 .radio_addr
= ADDR_UNSET
,
818 [BTTV_BOARD_IPROTV
] = {
819 .name
= "Formac iProTV, Formac ProTV I (bt848)",
825 .muxsel
= { 2, 3, 1, 1},
826 .audiomux
= { 1, 0, 0, 0, 0 },
828 .tuner_type
= TUNER_PHILIPS_PAL
,
829 .tuner_addr
= ADDR_UNSET
,
830 .radio_addr
= ADDR_UNSET
,
833 /* ---- card 0x20 ---------------------------------- */
834 [BTTV_BOARD_INTEL_C_S_PCI
] = {
835 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
841 .muxsel
= { 2, 3, 1, 1},
845 .tuner_addr
= ADDR_UNSET
,
846 .radio_addr
= ADDR_UNSET
,
848 [BTTV_BOARD_TERRATVALUE
] = {
849 .name
= "Terratec TerraTValue Version Bt878",
854 .gpiomask
= 0xffff00,
855 .muxsel
= { 2, 3, 1, 1},
856 .audiomux
= { 0x500, 0, 0x300, 0x900, 0x900},
859 .tuner_type
= TUNER_PHILIPS_PAL
,
860 .tuner_addr
= ADDR_UNSET
,
861 .radio_addr
= ADDR_UNSET
,
863 [BTTV_BOARD_WINFAST2000
] = {
864 .name
= "Leadtek WinFast 2000/ WinFast 2000 XP",
869 .muxsel
= { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
871 .gpiomask
= 0xc33000,
872 .audiomux
= { 0x422000,0x1000,0x0000,0x620000,0x800000 },
874 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
875 .gpiomask
= 0xb33000,
876 .audiomux
= { 0x122000,0x1000,0x0000,0x620000,0x800000 },
878 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
879 gpio23 -- hef4052:nEnable (0x800000)
882 0x0000: external audio
886 Note: There exists another variant "Winfast 2000" with tv stereo !?
887 Note: eeprom only contains FF and pci subsystem id 107d:6606
892 .tuner_type
= 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
893 .tuner_addr
= ADDR_UNSET
,
894 .radio_addr
= ADDR_UNSET
,
895 .audio_hook
= winfast2000_audio
,
898 [BTTV_BOARD_CHRONOS_VS2
] = {
899 .name
= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
905 .muxsel
= { 2, 3, 1, 1},
906 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
909 .tuner_addr
= ADDR_UNSET
,
910 .radio_addr
= ADDR_UNSET
,
913 /* ---- card 0x24 ---------------------------------- */
914 [BTTV_BOARD_TYPHOON_TVIEW
] = {
915 .name
= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
921 .muxsel
= { 2, 3, 1, 1},
922 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
925 .tuner_addr
= ADDR_UNSET
,
926 .radio_addr
= ADDR_UNSET
,
929 [BTTV_BOARD_PXELVWPLTVPRO
] = {
930 .name
= "Prolink PixelView PlayTV pro",
936 .muxsel
= { 2, 3, 1, 1 },
937 .audiomux
= { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
941 .tuner_addr
= ADDR_UNSET
,
942 .radio_addr
= ADDR_UNSET
,
944 [BTTV_BOARD_MAGICTVIEW063
] = {
945 .name
= "Askey CPH06X TView99",
950 .gpiomask
= 0x551e00,
951 .muxsel
= { 2, 3, 1, 0},
952 .audiomux
= { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
956 .tuner_addr
= ADDR_UNSET
,
957 .radio_addr
= ADDR_UNSET
,
960 [BTTV_BOARD_PINNACLE
] = {
961 .name
= "Pinnacle PCTV Studio/Rave",
966 .gpiomask
= 0x03000F,
967 .muxsel
= { 2, 3, 1, 1},
968 .audiomux
= { 2, 0xd0001, 0, 0, 1},
972 .tuner_addr
= ADDR_UNSET
,
973 .radio_addr
= ADDR_UNSET
,
976 /* ---- card 0x28 ---------------------------------- */
977 [BTTV_BOARD_STB2
] = {
978 .name
= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
984 .muxsel
= { 2, 3, 1, 1},
985 .audiomux
= { 4, 0, 2, 3, 1},
988 .tuner_type
= TUNER_PHILIPS_NTSC
,
989 .tuner_addr
= ADDR_UNSET
,
990 .radio_addr
= ADDR_UNSET
,
994 [BTTV_BOARD_AVPHONE98
] = {
995 .name
= "AVerMedia TVPhone 98",
1001 .muxsel
= { 2, 3, 1, 1},
1002 .audiomux
= { 13, 4, 11, 7, 0, 0},
1006 .tuner_addr
= ADDR_UNSET
,
1007 .radio_addr
= ADDR_UNSET
,
1009 .audio_hook
= avermedia_tvphone_audio
,
1011 [BTTV_BOARD_PV951
] = {
1012 .name
= "ProVideo PV951", /* pic16c54 */
1018 .muxsel
= { 2, 3, 1, 1},
1019 .audiomux
= { 0, 0, 0, 0, 0},
1024 .tuner_addr
= ADDR_UNSET
,
1025 .radio_addr
= ADDR_UNSET
,
1027 [BTTV_BOARD_ONAIR_TV
] = {
1028 .name
= "Little OnAir TV",
1034 .muxsel
= {2, 3, 1, 1},
1035 .audiomux
= {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
1038 .tuner_addr
= ADDR_UNSET
,
1039 .radio_addr
= ADDR_UNSET
,
1042 /* ---- card 0x2c ---------------------------------- */
1043 [BTTV_BOARD_SIGMA_TVII_FM
] = {
1044 .name
= "Sigma TVII-FM",
1050 .muxsel
= {2, 3, 1, 1},
1051 .audiomux
= {1, 1, 0, 2, 3},
1055 .tuner_addr
= ADDR_UNSET
,
1056 .radio_addr
= ADDR_UNSET
,
1058 [BTTV_BOARD_MATRIX_VISION2
] = {
1059 .name
= "MATRIX-Vision MV-Delta 2",
1065 .muxsel
= { 2, 3, 1, 0, 0},
1070 .tuner_addr
= ADDR_UNSET
,
1071 .radio_addr
= ADDR_UNSET
,
1073 [BTTV_BOARD_ZOLTRIX_GENIE
] = {
1074 .name
= "Zoltrix Genie TV/FM",
1079 .gpiomask
= 0xbcf03f,
1080 .muxsel
= { 2, 3, 1, 1},
1081 .audiomux
= { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
1085 .tuner_addr
= ADDR_UNSET
,
1086 .radio_addr
= ADDR_UNSET
,
1088 [BTTV_BOARD_TERRATVRADIO
] = {
1089 .name
= "Terratec TV/Radio+",
1094 .gpiomask
= 0x70000,
1095 .muxsel
= { 2, 3, 1, 1},
1096 .audiomux
= { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
1101 .tuner_addr
= ADDR_UNSET
,
1102 .radio_addr
= ADDR_UNSET
,
1106 /* ---- card 0x30 ---------------------------------- */
1107 [BTTV_BOARD_DYNALINK
] = {
1108 .name
= "Askey CPH03x/ Dynalink Magic TView",
1114 .muxsel
= { 2, 3, 1, 1},
1115 .audiomux
= {2,0,0,0,1},
1119 .tuner_addr
= ADDR_UNSET
,
1120 .radio_addr
= ADDR_UNSET
,
1122 [BTTV_BOARD_GVBCTV3PCI
] = {
1123 .name
= "IODATA GV-BCTV3/PCI",
1128 .gpiomask
= 0x010f00,
1129 .muxsel
= {2, 3, 0, 0},
1130 .audiomux
= {0x10000, 0, 0x10000, 0, 0, 0},
1133 .tuner_type
= TUNER_ALPS_TSHC6_NTSC
,
1134 .tuner_addr
= ADDR_UNSET
,
1135 .radio_addr
= ADDR_UNSET
,
1136 .audio_hook
= gvbctv3pci_audio
,
1138 [BTTV_BOARD_PXELVWPLTVPAK
] = {
1139 .name
= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1144 .gpiomask
= 0xAA0000,
1145 .muxsel
= { 2,3,1,1,-1 },
1146 .digital_mode
= DIGITAL_MODE_CAMERA
,
1147 .audiomux
= { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
1150 .tuner_type
= TUNER_PHILIPS_PAL_I
,
1151 .tuner_addr
= ADDR_UNSET
,
1152 .radio_addr
= ADDR_UNSET
,
1154 /* GPIO wiring: (different from Rev.4C !)
1155 GPIO17: U4.A0 (first hef4052bt)
1157 GPIO20: U5.A1 (second hef4052bt)
1159 GPIO22: BT832 Reset Line
1160 GPIO23: A5,A0, U5,nEN
1161 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1164 [BTTV_BOARD_EAGLE
] = {
1165 .name
= "Eagle Wireless Capricorn2 (bt878A)",
1171 .muxsel
= { 2, 0, 1, 1},
1172 .audiomux
= { 0, 1, 2, 3, 4},
1174 .tuner_type
= -1 /* TUNER_ALPS_TMDH2_NTSC */,
1175 .tuner_addr
= ADDR_UNSET
,
1176 .radio_addr
= ADDR_UNSET
,
1179 /* ---- card 0x34 ---------------------------------- */
1180 [BTTV_BOARD_PINNACLEPRO
] = {
1181 /* David Härdeman <david@2gen.com> */
1182 .name
= "Pinnacle PCTV Studio Pro",
1187 .gpiomask
= 0x03000F,
1188 .muxsel
= { 2, 3, 1, 1},
1189 .audiomux
= { 1, 0xd0001, 0, 0, 10},
1190 /* sound path (5 sources):
1191 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1194 2= Mono TV sound from Tuner
1196 MUX2 (mask 0x30000):
1198 1= FM stereo Radio from Tuner */
1202 .tuner_addr
= ADDR_UNSET
,
1203 .radio_addr
= ADDR_UNSET
,
1205 [BTTV_BOARD_TVIEW_RDS_FM
] = {
1206 /* Claas Langbehn <claas@bigfoot.com>,
1207 Sven Grothklags <sven@upb.de> */
1208 .name
= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1214 .muxsel
= { 2, 3, 1, 1},
1215 .audiomux
= { 0, 0, 0x10, 8, 4 },
1218 .tuner_type
= TUNER_PHILIPS_PAL
,
1219 .tuner_addr
= ADDR_UNSET
,
1220 .radio_addr
= ADDR_UNSET
,
1223 [BTTV_BOARD_LIFETEC_9415
] = {
1224 /* Tim Röstermundt <rosterm@uni-muenster.de>
1225 in de.comp.os.unix.linux.hardware:
1226 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1227 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1228 options tuner type=5 */
1229 .name
= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1235 .muxsel
= { 2, 3, 1, 1},
1236 .audiomux
= { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1237 /* For cards with tda9820/tda9821:
1238 0x0000: Tuner normal stereo
1239 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1240 0x0880: Tuner A2 stereo */
1243 .tuner_addr
= ADDR_UNSET
,
1244 .radio_addr
= ADDR_UNSET
,
1246 [BTTV_BOARD_BESTBUY_EASYTV
] = {
1247 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1248 old Easy TV BT848 version (model CPH031) */
1249 .name
= "Askey CPH031/ BESTBUY Easy TV",
1255 .muxsel
= { 2, 3, 1, 0},
1256 .audiomux
= { 2, 0, 0, 0, 10},
1259 .tuner_type
= TUNER_TEMIC_PAL
,
1260 .tuner_addr
= ADDR_UNSET
,
1261 .radio_addr
= ADDR_UNSET
,
1264 /* ---- card 0x38 ---------------------------------- */
1265 [BTTV_BOARD_FLYVIDEO_98FM
] = {
1266 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1267 .name
= "Lifeview FlyVideo 98FM LR50",
1273 .muxsel
= { 2, 3, 1, 1},
1274 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1277 .tuner_addr
= ADDR_UNSET
,
1278 .radio_addr
= ADDR_UNSET
,
1280 /* This is the ultimate cheapo capture card
1281 * just a BT848A on a small PCB!
1282 * Steve Hosgood <steve@equiinet.com> */
1283 [BTTV_BOARD_GRANDTEC
] = {
1284 .name
= "GrandTec 'Grand Video Capture' (Bt848)",
1296 .tuner_addr
= ADDR_UNSET
,
1297 .radio_addr
= ADDR_UNSET
,
1299 [BTTV_BOARD_ASKEY_CPH060
] = {
1300 /* Daniel Herrington <daniel.herrington@home.com> */
1301 .name
= "Askey CPH060/ Phoebe TV Master Only (No FM)",
1307 .muxsel
= { 2, 3, 1, 1},
1308 .audiomux
= { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1311 .tuner_type
= TUNER_TEMIC_4036FY5_NTSC
,
1312 .tuner_addr
= ADDR_UNSET
,
1313 .radio_addr
= ADDR_UNSET
,
1315 [BTTV_BOARD_ASKEY_CPH03X
] = {
1316 /* Matti Mottus <mottus@physic.ut.ee> */
1317 .name
= "Askey CPH03x TV Capturer",
1322 .gpiomask
= 0x03000F,
1323 .muxsel
= { 2, 3, 1, 0},
1324 .audiomux
= { 2,0,0,0,1 },
1327 .tuner_addr
= ADDR_UNSET
,
1328 .radio_addr
= ADDR_UNSET
,
1331 /* ---- card 0x3c ---------------------------------- */
1332 [BTTV_BOARD_MM100PCTV
] = {
1333 /* Philip Blundell <philb@gnu.org> */
1334 .name
= "Modular Technology MM100PCTV",
1340 .muxsel
= { 2, 3, 1, 1},
1341 .audiomux
= { 2, 0, 0, 1, 8},
1343 .tuner_type
= TUNER_TEMIC_PAL
,
1344 .tuner_addr
= ADDR_UNSET
,
1345 .radio_addr
= ADDR_UNSET
,
1347 [BTTV_BOARD_GMV1
] = {
1348 /* Adrian Cox <adrian@humboldt.co.uk */
1349 .name
= "AG Electronics GMV1",
1361 .tuner_addr
= ADDR_UNSET
,
1362 .radio_addr
= ADDR_UNSET
,
1364 [BTTV_BOARD_BESTBUY_EASYTV2
] = {
1365 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1366 new Easy TV BT878 version (model CPH061)
1367 special thanks to Informatica Mieres for providing the card */
1368 .name
= "Askey CPH061/ BESTBUY Easy TV (bt878)",
1374 .muxsel
= { 2, 3, 1, 0},
1375 .audiomux
= { 1, 0, 4, 4, 9},
1378 .tuner_type
= TUNER_PHILIPS_PAL
,
1379 .tuner_addr
= ADDR_UNSET
,
1380 .radio_addr
= ADDR_UNSET
,
1382 [BTTV_BOARD_ATI_TVWONDER
] = {
1383 /* Lukas Gebauer <geby@volny.cz> */
1384 .name
= "ATI TV-Wonder",
1390 .muxsel
= { 2, 3, 1, 0 },
1391 .audiomux
= { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1393 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1394 .tuner_addr
= ADDR_UNSET
,
1395 .radio_addr
= ADDR_UNSET
,
1398 /* ---- card 0x40 ---------------------------------- */
1399 [BTTV_BOARD_ATI_TVWONDERVE
] = {
1400 /* Lukas Gebauer <geby@volny.cz> */
1401 .name
= "ATI TV-Wonder VE",
1407 .muxsel
= { 2, 3, 0, 1},
1408 .audiomux
= { 0, 0, 1, 0, 0},
1411 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1412 .tuner_addr
= ADDR_UNSET
,
1413 .radio_addr
= ADDR_UNSET
,
1415 [BTTV_BOARD_FLYVIDEO2000
] = {
1416 /* DeeJay <deejay@westel900.net (2000S) */
1417 .name
= "Lifeview FlyVideo 2000S LR90",
1423 .muxsel
= { 2, 3, 0, 1},
1424 /* Radio changed from 1e80 to 0x800 to make
1425 FlyVideo2000S in .hu happy (gm)*/
1426 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1427 .audiomux
= { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1428 .audio_hook
= fv2000s_audio
,
1434 .tuner_addr
= ADDR_UNSET
,
1435 .radio_addr
= ADDR_UNSET
,
1437 [BTTV_BOARD_TERRATVALUER
] = {
1438 .name
= "Terratec TValueRadio",
1443 .gpiomask
= 0xffff00,
1444 .muxsel
= { 2, 3, 1, 1},
1445 .audiomux
= { 0x500, 0x500, 0x300, 0x900, 0x900},
1448 .tuner_type
= TUNER_PHILIPS_PAL
,
1449 .tuner_addr
= ADDR_UNSET
,
1450 .radio_addr
= ADDR_UNSET
,
1453 [BTTV_BOARD_GVBCTV4PCI
] = {
1454 /* TANAKA Kei <peg00625@nifty.com> */
1455 .name
= "IODATA GV-BCTV4/PCI",
1460 .gpiomask
= 0x010f00,
1461 .muxsel
= {2, 3, 0, 0},
1462 .audiomux
= {0x10000, 0, 0x10000, 0, 0, 0},
1465 .tuner_type
= TUNER_SHARP_2U5JF5540_NTSC
,
1466 .tuner_addr
= ADDR_UNSET
,
1467 .radio_addr
= ADDR_UNSET
,
1468 .audio_hook
= gvbctv3pci_audio
,
1471 /* ---- card 0x44 ---------------------------------- */
1472 [BTTV_BOARD_VOODOOTV_FM
] = {
1473 .name
= "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1474 /* try "insmod msp3400 simple=0" if you have
1475 * sound problems with this card. */
1480 .gpiomask
= 0x4f8a00,
1481 /* 0x100000: 1=MSP enabled (0=disable again)
1482 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1483 .audiomux
= {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1484 /* tvtuner, radio, external,internal, mute, stereo
1485 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1486 .muxsel
= { 2, 3 ,0 ,1},
1487 .tuner_type
= TUNER_MT2032
,
1488 .tuner_addr
= ADDR_UNSET
,
1489 .radio_addr
= ADDR_UNSET
,
1493 [BTTV_BOARD_AIMMS
] = {
1494 /* Philip Blundell <pb@nexus.co.uk> */
1495 .name
= "Active Imaging AIMMS",
1500 .tuner_addr
= ADDR_UNSET
,
1501 .radio_addr
= ADDR_UNSET
,
1506 [BTTV_BOARD_PV_BT878P_PLUS
] = {
1507 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1508 .name
= "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1514 .muxsel
= { 2, 3, 1, 1},
1515 .audiomux
= { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
1519 .tuner_addr
= ADDR_UNSET
,
1520 .radio_addr
= ADDR_UNSET
,
1523 GPIO0: U4.A0 (hef4052bt)
1525 GPIO2: U4.A1 (second hef4052bt)
1526 GPIO3: U4.nEN, U5.A0, A5.nEN
1530 [BTTV_BOARD_FLYVIDEO98EZ
] = {
1531 .name
= "Lifeview FlyVideo 98EZ (capture only) LR51",
1536 .muxsel
= { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1539 .tuner_type
= UNSET
,
1540 .tuner_addr
= ADDR_UNSET
,
1541 .radio_addr
= ADDR_UNSET
,
1544 /* ---- card 0x48 ---------------------------------- */
1545 [BTTV_BOARD_PV_BT878P_9B
] = {
1546 /* Dariusz Kowalewski <darekk@automex.pl> */
1547 .name
= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1553 .muxsel
= { 2, 3, 1, 1 },
1554 .audiomux
= { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1560 .tuner_addr
= ADDR_UNSET
,
1561 .radio_addr
= ADDR_UNSET
,
1562 .audio_hook
= pvbt878p9b_audio
, /* Note: not all cards have stereo */
1563 .has_radio
= 1, /* Note: not all cards have radio */
1570 GPIO20,22,23: R30,R29,R28
1573 [BTTV_BOARD_SENSORAY311
] = {
1574 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1575 /* you must jumper JP5 for the card to work */
1576 .name
= "Sensoray 311",
1582 .muxsel
= { 2, 3, 1, 0, 0},
1586 .tuner_addr
= ADDR_UNSET
,
1587 .radio_addr
= ADDR_UNSET
,
1589 [BTTV_BOARD_RV605
] = {
1590 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1591 .name
= "RemoteVision MX (RV605)",
1597 .gpiomask2
= 0x07ff,
1598 .muxsel
= { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1599 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1603 .tuner_addr
= ADDR_UNSET
,
1604 .radio_addr
= ADDR_UNSET
,
1605 .muxsel_hook
= rv605_muxsel
,
1607 [BTTV_BOARD_POWERCLR_MTV878
] = {
1608 .name
= "Powercolor MTV878/ MTV878R/ MTV878F",
1613 .gpiomask
= 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1614 .muxsel
= { 2, 1, 1, },
1615 .audiomux
= { 0, 1, 2, 2, 4 },
1617 .tuner_type
= TUNER_PHILIPS_PAL
,
1618 .tuner_addr
= ADDR_UNSET
,
1619 .radio_addr
= ADDR_UNSET
,
1624 /* ---- card 0x4c ---------------------------------- */
1625 [BTTV_BOARD_WINDVR
] = {
1626 /* Masaki Suzuki <masaki@btree.org> */
1627 .name
= "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1632 .gpiomask
= 0x140007,
1633 .muxsel
= { 2, 3, 1, 1 },
1634 .audiomux
= { 0, 1, 2, 3, 4, 0 },
1635 .tuner_type
= TUNER_PHILIPS_NTSC
,
1636 .tuner_addr
= ADDR_UNSET
,
1637 .radio_addr
= ADDR_UNSET
,
1638 .audio_hook
= windvr_audio
,
1640 [BTTV_BOARD_GRANDTEC_MULTI
] = {
1641 .name
= "GrandTec Multi Capture Card (Bt878)",
1647 .muxsel
= { 2, 3, 1, 0 },
1653 .tuner_addr
= ADDR_UNSET
,
1654 .radio_addr
= ADDR_UNSET
,
1656 [BTTV_BOARD_KWORLD
] = {
1657 .name
= "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1663 .muxsel
= { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1664 .audiomux
= { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
1665 * This card lacks external Audio In, so we mute it on Ext. & Int.
1666 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1667 * This card lacks PCI subsystem ID, sigh.
1668 * audiomux=1: lower volume, 2+3: mute
1669 * btwincap uses 0x80000/0x80003
1675 .tuner_addr
= ADDR_UNSET
,
1676 .radio_addr
= ADDR_UNSET
,
1677 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1678 radio signal strength indicators work fine. */
1681 GPIO0,1: HEF4052 A0,A1
1682 GPIO2: HEF4052 nENABLE
1684 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1688 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1690 [BTTV_BOARD_DSP_TCVIDEO
] = {
1691 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1692 .name
= "DSP Design TCVIDEO",
1695 .muxsel
= { 2, 3, 1, 0},
1698 .tuner_addr
= ADDR_UNSET
,
1699 .radio_addr
= ADDR_UNSET
,
1702 /* ---- card 0x50 ---------------------------------- */
1703 [BTTV_BOARD_HAUPPAUGEPVR
] = {
1704 .name
= "Hauppauge WinTV PVR",
1709 .muxsel
= { 2, 0, 1, 1},
1713 .tuner_addr
= ADDR_UNSET
,
1714 .radio_addr
= ADDR_UNSET
,
1719 [BTTV_BOARD_GVBCTV5PCI
] = {
1720 .name
= "IODATA GV-BCTV5/PCI",
1725 .gpiomask
= 0x0f0f80,
1726 .muxsel
= {2, 3, 1, 0},
1727 .audiomux
= {0x030000, 0x010000, 0, 0, 0x020000, 0},
1730 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
1731 .tuner_addr
= ADDR_UNSET
,
1732 .radio_addr
= ADDR_UNSET
,
1733 .audio_hook
= gvbctv5pci_audio
,
1736 [BTTV_BOARD_OSPREY1x0
] = {
1737 .name
= "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1738 .video_inputs
= 4, /* id-inputs-clock */
1742 .muxsel
= { 3, 2, 0, 1 },
1745 .tuner_addr
= ADDR_UNSET
,
1746 .radio_addr
= ADDR_UNSET
,
1751 [BTTV_BOARD_OSPREY1x0_848
] = {
1752 .name
= "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1757 .muxsel
= { 2, 3, 1 },
1760 .tuner_addr
= ADDR_UNSET
,
1761 .radio_addr
= ADDR_UNSET
,
1767 /* ---- card 0x54 ---------------------------------- */
1768 [BTTV_BOARD_OSPREY101_848
] = {
1769 .name
= "Osprey 101 (848)", /* 0x05-40C0-C1 */
1777 .tuner_addr
= ADDR_UNSET
,
1778 .radio_addr
= ADDR_UNSET
,
1783 [BTTV_BOARD_OSPREY1x1
] = {
1784 .name
= "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1792 .tuner_addr
= ADDR_UNSET
,
1793 .radio_addr
= ADDR_UNSET
,
1798 [BTTV_BOARD_OSPREY1x1_SVID
] = {
1799 .name
= "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1807 .tuner_addr
= ADDR_UNSET
,
1808 .radio_addr
= ADDR_UNSET
,
1813 [BTTV_BOARD_OSPREY2xx
] = {
1814 .name
= "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1821 .tuner_type
= UNSET
,
1822 .tuner_addr
= ADDR_UNSET
,
1823 .radio_addr
= ADDR_UNSET
,
1829 /* ---- card 0x58 ---------------------------------- */
1830 [BTTV_BOARD_OSPREY2x0_SVID
] = {
1831 .name
= "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1838 .tuner_type
= UNSET
,
1839 .tuner_addr
= ADDR_UNSET
,
1840 .radio_addr
= ADDR_UNSET
,
1845 [BTTV_BOARD_OSPREY2x0
] = {
1846 .name
= "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1853 .tuner_type
= UNSET
,
1854 .tuner_addr
= ADDR_UNSET
,
1855 .radio_addr
= ADDR_UNSET
,
1860 [BTTV_BOARD_OSPREY500
] = {
1861 .name
= "Osprey 500", /* 500 */
1869 .tuner_addr
= ADDR_UNSET
,
1870 .radio_addr
= ADDR_UNSET
,
1875 [BTTV_BOARD_OSPREY540
] = {
1876 .name
= "Osprey 540", /* 540 */
1880 #if 0 /* TODO ... */
1881 .svhs
= OSPREY540_SVID_ANALOG
,
1882 .muxsel
= { [OSPREY540_COMP_ANALOG
] = 2,
1883 [OSPREY540_SVID_ANALOG
] = 3, },
1887 .tuner_addr
= ADDR_UNSET
,
1888 .radio_addr
= ADDR_UNSET
,
1892 #if 0 /* TODO ... */
1893 .muxsel_hook
= osprey_540_muxsel
,
1894 .picture_hook
= osprey_540_set_picture
,
1898 /* ---- card 0x5C ---------------------------------- */
1899 [BTTV_BOARD_OSPREY2000
] = {
1900 .name
= "Osprey 2000", /* 2000 */
1907 .tuner_type
= UNSET
,
1908 .tuner_addr
= ADDR_UNSET
,
1909 .radio_addr
= ADDR_UNSET
,
1912 .no_tda7432
= 1, /* must avoid, conflicts with the bt860 */
1914 [BTTV_BOARD_IDS_EAGLE
] = {
1915 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1916 .name
= "IDS Eagle",
1921 .tuner_addr
= ADDR_UNSET
,
1922 .radio_addr
= ADDR_UNSET
,
1925 .muxsel
= { 0, 1, 2, 3 },
1926 .muxsel_hook
= eagle_muxsel
,
1931 [BTTV_BOARD_PINNACLESAT
] = {
1932 .name
= "Pinnacle PCTV Sat",
1938 .tuner_addr
= ADDR_UNSET
,
1939 .radio_addr
= ADDR_UNSET
,
1943 .muxsel
= { 3, 0, 1, 2},
1948 [BTTV_BOARD_FORMAC_PROTV
] = {
1949 .name
= "Formac ProTV II (bt878)",
1955 /* TV, Comp1, Composite over SVID con, SVID */
1956 .muxsel
= { 2, 3, 1, 1},
1957 .audiomux
= { 2, 2, 0, 0, 0 },
1960 .tuner_type
= TUNER_PHILIPS_PAL
,
1961 .tuner_addr
= ADDR_UNSET
,
1962 .radio_addr
= ADDR_UNSET
,
1964 GPIO=0x00,0x01,0x03: mute (?)
1965 0x02: both TV and radio (tuner: FM1216/I)
1966 The card has onboard audio connectors labeled "cdrom" and "board",
1967 not soldered here, though unknown wiring.
1968 Card lacks: external audio in, pci subsystem id.
1972 /* ---- card 0x60 ---------------------------------- */
1973 [BTTV_BOARD_MACHTV
] = {
1980 .muxsel
= { 2, 3, 1, 1},
1981 .audiomux
= { 0, 1, 2, 3, 4},
1984 .tuner_addr
= ADDR_UNSET
,
1985 .radio_addr
= ADDR_UNSET
,
1988 [BTTV_BOARD_EURESYS_PICOLO
] = {
1989 .name
= "Euresys Picolo",
1998 .muxsel
= { 2, 0, 1},
2000 .tuner_type
= UNSET
,
2001 .tuner_addr
= ADDR_UNSET
,
2002 .radio_addr
= ADDR_UNSET
,
2004 [BTTV_BOARD_PV150
] = {
2005 /* Luc Van Hoeylandt <luc@e-magic.be> */
2006 .name
= "ProVideo PV150", /* 0x4f */
2017 .tuner_type
= UNSET
,
2018 .tuner_addr
= ADDR_UNSET
,
2019 .radio_addr
= ADDR_UNSET
,
2021 [BTTV_BOARD_AD_TVK503
] = {
2022 /* Hiroshi Takekawa <sian@big.or.jp> */
2023 /* This card lacks subsystem ID */
2024 .name
= "AD-TVK503", /* 0x63 */
2029 .gpiomask
= 0x001e8007,
2030 .muxsel
= { 2, 3, 1, 0 },
2031 /* Tuner, Radio, external, internal, off, on */
2032 .audiomux
= { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
2037 .tuner_addr
= ADDR_UNSET
,
2038 .radio_addr
= ADDR_UNSET
,
2039 .audio_hook
= adtvk503_audio
,
2042 /* ---- card 0x64 ---------------------------------- */
2043 [BTTV_BOARD_HERCULES_SM_TV
] = {
2044 .name
= "Hercules Smart TV Stereo",
2050 .muxsel
= { 2, 3, 1, 1 },
2055 .tuner_addr
= ADDR_UNSET
,
2056 .radio_addr
= ADDR_UNSET
,
2058 - card lacks subsystem ID
2059 - stereo variant w/ daughter board with tda9874a @0xb0
2061 always from tda9874 independent of GPIO (?)
2062 external line in: unknown
2063 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2064 hef4053 (instead 4052) for unknown function
2067 [BTTV_BOARD_PACETV
] = {
2068 .name
= "Pace TV & Radio Card",
2073 .muxsel
= { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
2078 .tuner_addr
= ADDR_UNSET
,
2079 .radio_addr
= ADDR_UNSET
,
2082 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2083 only internal line out: (4pin header) RGGL
2084 Radio must be decoded by msp3410d (not routed through)*/
2086 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2089 [BTTV_BOARD_IVC200
] = {
2090 /* Chris Willing <chris@vislab.usyd.edu.au> */
2096 .tuner_addr
= ADDR_UNSET
,
2097 .radio_addr
= ADDR_UNSET
,
2103 [BTTV_BOARD_XGUARD
] = {
2104 .name
= "Grand X-Guard / Trust 814PCI",
2110 .tuner_addr
= ADDR_UNSET
,
2111 .radio_addr
= ADDR_UNSET
,
2113 .muxsel
= { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2114 .muxsel_hook
= xguard_muxsel
,
2121 /* ---- card 0x68 ---------------------------------- */
2122 [BTTV_BOARD_NEBULA_DIGITV
] = {
2123 .name
= "Nebula Electronics DigiTV",
2127 .muxsel
= { 2, 3, 1, 0},
2133 .tuner_addr
= ADDR_UNSET
,
2134 .radio_addr
= ADDR_UNSET
,
2138 [BTTV_BOARD_PV143
] = {
2139 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2140 .name
= "ProVideo PV143",
2146 .muxsel
= { 2, 3, 1, 0 },
2152 .tuner_addr
= ADDR_UNSET
,
2153 .radio_addr
= ADDR_UNSET
,
2155 [BTTV_BOARD_VD009X1_MINIDIN
] = {
2156 /* M.Klahr@phytec.de */
2157 .name
= "PHYTEC VD-009-X1 MiniDIN (bt878)",
2160 .tuner
= -1, /* card has no tuner */
2163 .muxsel
= { 2, 3, 1, 0},
2164 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2168 .tuner_addr
= ADDR_UNSET
,
2169 .radio_addr
= ADDR_UNSET
,
2171 [BTTV_BOARD_VD009X1_COMBI
] = {
2172 .name
= "PHYTEC VD-009-X1 Combi (bt878)",
2175 .tuner
= -1, /* card has no tuner */
2178 .muxsel
= { 2, 3, 1, 1},
2179 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2183 .tuner_addr
= ADDR_UNSET
,
2184 .radio_addr
= ADDR_UNSET
,
2187 /* ---- card 0x6c ---------------------------------- */
2188 [BTTV_BOARD_VD009_MINIDIN
] = {
2189 .name
= "PHYTEC VD-009 MiniDIN (bt878)",
2192 .tuner
= -1, /* card has no tuner */
2195 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
2196 via the upper nibble of muxsel. here: used for
2197 xternal video-mux */
2198 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2199 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2203 .tuner_addr
= ADDR_UNSET
,
2204 .radio_addr
= ADDR_UNSET
,
2206 [BTTV_BOARD_VD009_COMBI
] = {
2207 .name
= "PHYTEC VD-009 Combi (bt878)",
2210 .tuner
= -1, /* card has no tuner */
2213 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
2214 via the upper nibble of muxsel. here: used for
2215 xternal video-mux */
2216 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2217 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2221 .tuner_addr
= ADDR_UNSET
,
2222 .radio_addr
= ADDR_UNSET
,
2224 [BTTV_BOARD_IVC100
] = {
2230 .tuner_addr
= ADDR_UNSET
,
2231 .radio_addr
= ADDR_UNSET
,
2234 .muxsel
= { 2, 3, 1, 0 },
2237 [BTTV_BOARD_IVC120
] = {
2238 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2241 .audio_inputs
= 0, /* card has no audio */
2242 .tuner
= -1, /* card has no tuner */
2244 .tuner_addr
= ADDR_UNSET
,
2245 .radio_addr
= ADDR_UNSET
,
2246 .svhs
= -1, /* card has no svhs */
2252 .muxsel
= { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2253 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2254 .muxsel_hook
= ivc120_muxsel
,
2258 /* ---- card 0x70 ---------------------------------- */
2259 [BTTV_BOARD_PC_HDTV
] = {
2260 .name
= "pcHDTV HD-2000 TV",
2265 .muxsel
= { 2, 3, 1, 0},
2266 .tuner_type
= TUNER_PHILIPS_ATSC
,
2267 .tuner_addr
= ADDR_UNSET
,
2268 .radio_addr
= ADDR_UNSET
,
2271 [BTTV_BOARD_TWINHAN_DST
] = {
2272 .name
= "Twinhan DST + clones",
2276 .tuner_type
= TUNER_ABSENT
,
2277 .tuner_addr
= ADDR_UNSET
,
2278 .radio_addr
= ADDR_UNSET
,
2282 [BTTV_BOARD_WINFASTVC100
] = {
2283 .name
= "Winfast VC100",
2288 .muxsel
= { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
2292 .tuner_type
= TUNER_ABSENT
,
2293 .tuner_addr
= ADDR_UNSET
,
2294 .radio_addr
= ADDR_UNSET
,
2297 [BTTV_BOARD_TEV560
] = {
2298 .name
= "Teppro TEV-560/InterVision IV-560",
2304 .muxsel
= { 2, 3, 1, 1},
2305 .audiomux
= { 1, 1, 1, 1, 0},
2307 .tuner_type
= TUNER_PHILIPS_PAL
,
2308 .tuner_addr
= ADDR_UNSET
,
2309 .radio_addr
= ADDR_UNSET
,
2313 /* ---- card 0x74 ---------------------------------- */
2314 [BTTV_BOARD_SIMUS_GVC1100
] = {
2315 .name
= "SIMUS GVC1100",
2321 .tuner_addr
= ADDR_UNSET
,
2322 .radio_addr
= ADDR_UNSET
,
2324 .muxsel
= { 2, 2, 2, 2},
2326 .muxsel_hook
= gvc1100_muxsel
,
2328 [BTTV_BOARD_NGSTV_PLUS
] = {
2329 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2330 .name
= "NGS NGSTV+",
2334 .gpiomask
= 0x008007,
2335 .muxsel
= {2, 3, 0, 0},
2336 .audiomux
= {0, 0, 0, 0, 0x000003, 0},
2338 .tuner_type
= TUNER_PHILIPS_PAL
,
2339 .tuner_addr
= ADDR_UNSET
,
2340 .radio_addr
= ADDR_UNSET
,
2343 [BTTV_BOARD_LMLBT4
] = {
2344 /* http://linuxmedialabs.com */
2346 .video_inputs
= 4, /* IN1,IN2,IN3,IN4 */
2350 .muxsel
= { 2, 3, 1, 0 },
2356 .tuner_addr
= ADDR_UNSET
,
2357 .radio_addr
= ADDR_UNSET
,
2359 [BTTV_BOARD_TEKRAM_M205
] = {
2360 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2361 .name
= "Tekram M205 PRO",
2365 .tuner_type
= TUNER_PHILIPS_PAL
,
2366 .tuner_addr
= ADDR_UNSET
,
2367 .radio_addr
= ADDR_UNSET
,
2371 .muxsel
= { 2, 3, 1},
2372 .audiomux
= { 0x68, 0x68, 0x61, 0x61, 0x00 },
2376 /* ---- card 0x78 ---------------------------------- */
2377 [BTTV_BOARD_CONTVFMI
] = {
2378 /* Javier Cendan Ares <jcendan@lycos.es> */
2379 /* bt878 TV + FM without subsystem ID */
2380 .name
= "Conceptronic CONTVFMi",
2385 .gpiomask
= 0x008007,
2386 .muxsel
= { 2, 3, 1, 1 },
2387 .audiomux
= { 0, 1, 2, 2, 3 },
2390 .tuner_type
= TUNER_PHILIPS_PAL
,
2391 .tuner_addr
= ADDR_UNSET
,
2392 .radio_addr
= ADDR_UNSET
,
2396 [BTTV_BOARD_PICOLO_TETRA_CHIP
] = {
2397 /*Eric DEBIEF <debief@telemsa.com>*/
2398 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2399 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2401 .name
= "Euresys Picolo Tetra",
2407 .gpiomask2
= 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2411 .muxsel
= {2,2,2,2},/*878A input is always MUX0, see above.*/
2412 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2415 .muxsel_hook
= picolo_tetra_muxsel
,/*Required as it doesn't follow the classic input selection policy*/
2417 .tuner_addr
= ADDR_UNSET
,
2418 .radio_addr
= ADDR_UNSET
,
2420 [BTTV_BOARD_SPIRIT_TV
] = {
2421 /* Spirit TV Tuner from http://spiritmodems.com.au */
2422 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2423 .name
= "Spirit TV Tuner",
2428 .gpiomask
= 0x0000000f,
2429 .muxsel
= { 2, 1, 1 },
2430 .audiomux
= { 0x02, 0x00, 0x00, 0x00, 0x00},
2431 .tuner_type
= TUNER_TEMIC_PAL
,
2432 .tuner_addr
= ADDR_UNSET
,
2433 .radio_addr
= ADDR_UNSET
,
2437 [BTTV_BOARD_AVDVBT_771
] = {
2438 /* Wolfram Joost <wojo@frokaschwei.de> */
2439 .name
= "AVerMedia AVerTV DVB-T 771",
2443 .tuner_type
= TUNER_ABSENT
,
2444 .tuner_addr
= ADDR_UNSET
,
2445 .radio_addr
= ADDR_UNSET
,
2446 .muxsel
= { 3 , 3 },
2455 /* ---- card 0x7c ---------------------------------- */
2456 [BTTV_BOARD_AVDVBT_761
] = {
2457 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2458 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2459 .name
= "AverMedia AverTV DVB-T 761",
2463 .muxsel
= { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2469 .tuner_addr
= ADDR_UNSET
,
2470 .radio_addr
= ADDR_UNSET
,
2475 [BTTV_BOARD_MATRIX_VISIONSQ
] = {
2476 /* andre.schwarz@matrix-vision.de */
2477 .name
= "MATRIX Vision Sigma-SQ",
2483 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2,
2484 3, 3, 3, 3, 3, 3, 3, 3 },
2485 .muxsel_hook
= sigmaSQ_muxsel
,
2490 .tuner_addr
= ADDR_UNSET
,
2491 .radio_addr
= ADDR_UNSET
,
2493 [BTTV_BOARD_MATRIX_VISIONSLC
] = {
2494 /* andre.schwarz@matrix-vision.de */
2495 .name
= "MATRIX Vision Sigma-SLC",
2501 .muxsel
= { 2, 2, 2, 2 },
2502 .muxsel_hook
= sigmaSLC_muxsel
,
2507 .tuner_addr
= ADDR_UNSET
,
2508 .radio_addr
= ADDR_UNSET
,
2510 /* BTTV_BOARD_APAC_VIEWCOMP */
2511 [BTTV_BOARD_APAC_VIEWCOMP
] = {
2512 /* Attila Kondoros <attila.kondoros@chello.hu> */
2513 /* bt878 TV + FM 0x00000000 subsystem ID */
2514 .name
= "APAC Viewcomp 878(AMAX)",
2520 .muxsel
= { 2, 3, 1, 1},
2521 .audiomux
= { 2, 0, 0, 0, 10},
2524 .tuner_type
= TUNER_PHILIPS_PAL
,
2525 .tuner_addr
= ADDR_UNSET
,
2526 .radio_addr
= ADDR_UNSET
,
2527 .has_remote
= 1, /* miniremote works, see ir-kbd-gpio.c */
2528 .has_radio
= 1, /* not every card has radio */
2531 /* ---- card 0x80 ---------------------------------- */
2532 [BTTV_BOARD_DVICO_DVBT_LITE
] = {
2533 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2534 .name
= "DViCO FusionHDTV DVB-T Lite",
2543 .tuner_addr
= ADDR_UNSET
,
2544 .radio_addr
= ADDR_UNSET
,
2546 [BTTV_BOARD_VGEAR_MYVCD
] = {
2547 /* Steven <photon38@pchome.com.tw> */
2548 .name
= "V-Gear MyVCD",
2554 .muxsel
= {2, 3, 1, 0},
2555 .audiomux
= {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2558 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
2559 .tuner_addr
= ADDR_UNSET
,
2560 .radio_addr
= ADDR_UNSET
,
2566 [BTTV_BOARD_SUPER_TV
] = {
2567 /* Rick C <cryptdragoon@gmail.com> */
2568 .name
= "Super TV Tuner",
2573 .muxsel
= { 2, 3, 1, 0},
2574 .tuner_type
= TUNER_PHILIPS_NTSC
,
2575 .tuner_addr
= ADDR_UNSET
,
2576 .radio_addr
= ADDR_UNSET
,
2577 .gpiomask
= 0x008007,
2578 .audiomux
= { 0, 0x000001,0,0, 0},
2582 [BTTV_BOARD_TIBET_CS16
] = {
2583 /* Chris Fanning <video4linux@haydon.net> */
2584 .name
= "Tibet Systems 'Progress DVR' CS16",
2589 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2595 .tuner_addr
= ADDR_UNSET
,
2596 .radio_addr
= ADDR_UNSET
,
2597 .muxsel_hook
= tibetCS16_muxsel
,
2599 [BTTV_BOARD_KODICOM_4400R
] = {
2600 /* Bill Brack <wbrack@mmm.com.hk> */
2602 * Note that, because of the card's wiring, the "master"
2603 * BT878A chip (i.e. the one which controls the analog switch
2604 * and must use this card type) is the 2nd one detected. The
2605 * other 3 chips should use card type 0x85, whose description
2606 * follows this one. There is a EEPROM on the card (which is
2607 * connected to the I2C of one of those other chips), but is
2608 * not currently handled. There is also a facility for a
2609 * "monitor", which is also not currently implemented.
2611 .name
= "Kodicom 4400R (master)",
2616 .tuner_addr
= ADDR_UNSET
,
2617 .radio_addr
= ADDR_UNSET
,
2619 /* GPIO bits 0-9 used for analog switch:
2620 * 00 - 03: camera selector
2621 * 04 - 06: channel (controller) selector
2622 * 07: data (1->on, 0->off)
2625 * bit 16 is input from sync separator for the channel
2627 .gpiomask
= 0x0003ff,
2629 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2634 .muxsel_hook
= kodicom4400r_muxsel
,
2636 [BTTV_BOARD_KODICOM_4400R_SL
] = {
2637 /* Bill Brack <wbrack@mmm.com.hk> */
2638 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2639 * one which controls the analog switch, and must use the card type)
2640 * is the 2nd one detected. The other 3 chips should use this card
2643 .name
= "Kodicom 4400R (slave)",
2648 .tuner_addr
= ADDR_UNSET
,
2649 .radio_addr
= ADDR_UNSET
,
2651 .gpiomask
= 0x010000,
2653 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2658 .muxsel_hook
= kodicom4400r_muxsel
,
2660 /* ---- card 0x86---------------------------------- */
2661 [BTTV_BOARD_ADLINK_RTV24
] = {
2662 /* Michael Henson <mhenson@clarityvi.com> */
2663 /* Adlink RTV24 with special unlock codes */
2664 .name
= "Adlink RTV24",
2669 .muxsel
= { 2, 3, 1, 0},
2671 .tuner_addr
= ADDR_UNSET
,
2672 .radio_addr
= ADDR_UNSET
,
2675 /* ---- card 0x87---------------------------------- */
2676 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
] = {
2677 /* Michael Krufky <mkrufky@m1k.net> */
2678 .name
= "DViCO FusionHDTV 5 Lite",
2680 .tuner_type
= TUNER_LG_TDVS_H062F
,
2681 .tuner_addr
= ADDR_UNSET
,
2682 .radio_addr
= ADDR_UNSET
,
2686 .muxsel
= { 2, 3, 1 },
2687 .gpiomask
= 0x00e00007,
2688 .audiomux
= { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
2694 /* ---- card 0x88---------------------------------- */
2695 [BTTV_BOARD_ACORP_Y878F
] = {
2696 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2697 .name
= "Acorp Y878F",
2702 .gpiomask
= 0x01fe00,
2703 .muxsel
= { 2, 3, 1, 1},
2704 .audiomux
= { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
2707 .tuner_type
= TUNER_YMEC_TVF66T5_B_DFF
,
2708 .tuner_addr
= 0xc1 >>1,
2709 .radio_addr
= 0xc1 >>1,
2712 /* ---- card 0x89 ---------------------------------- */
2713 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2
] = {
2714 .name
= "Conceptronic CTVFMi v2",
2719 .gpiomask
= 0x001c0007,
2720 .muxsel
= { 2, 3, 1, 1 },
2721 .audiomux
= { 0, 1, 2, 2, 3 },
2724 .tuner_type
= TUNER_PHILIPS_FM1216ME_MK3
,
2725 .tuner_addr
= ADDR_UNSET
,
2726 .radio_addr
= ADDR_UNSET
,
2732 /* ---- card 0x8a ---------------------------------- */
2733 [BTTV_BOARD_PV_BT878P_2E
] = {
2734 .name
= "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2739 .gpiomask
= 0x01fe00,
2740 .muxsel
= { 2,3,1,1,-1 },
2741 .digital_mode
= DIGITAL_MODE_CAMERA
,
2742 .audiomux
= { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 },
2745 .tuner_type
= TUNER_LG_PAL_FM
,
2746 .tuner_addr
= ADDR_UNSET
,
2747 .radio_addr
= ADDR_UNSET
,
2750 /* ---- card 0x8b ---------------------------------- */
2751 [BTTV_BOARD_PV_M4900
] = {
2752 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2753 .name
= "Prolink PixelView PlayTV MPEG2 PV-M4900",
2759 .muxsel
= { 2, 3, 1, 1 },
2760 .audiomux
= { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
2763 .tuner_type
= TUNER_YMEC_TVF_5533MF
,
2764 .tuner_addr
= ADDR_UNSET
,
2765 .radio_addr
= ADDR_UNSET
,
2769 /* ---- card 0x8c ---------------------------------- */
2770 [BTTV_BOARD_OSPREY440
] = {
2771 .name
= "Osprey 440",
2778 .tuner_type
= UNSET
,
2779 .tuner_addr
= ADDR_UNSET
,
2780 .radio_addr
= ADDR_UNSET
,
2785 /* ---- card 0x8d ---------------------------------- */
2786 [BTTV_BOARD_ASOUND_SKYEYE
] = {
2787 .name
= "Asound Skyeye PCTV",
2793 .muxsel
= { 2, 3, 1, 1},
2794 .audiomux
= {2,0,0,0,1},
2798 .tuner_addr
= ADDR_UNSET
,
2799 .radio_addr
= ADDR_UNSET
,
2804 static const unsigned int bttv_num_tvcards
= ARRAY_SIZE(bttv_tvcards
);
2806 /* ----------------------------------------------------------------------- */
2808 static unsigned char eeprom_data
[256];
2813 void __devinit
bttv_idcard(struct bttv
*btv
)
2815 unsigned int gpiobits
;
2819 /* read PCI subsystem ID */
2820 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_ID
, &tmp
);
2821 btv
->cardid
= tmp
<< 16;
2822 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_VENDOR_ID
, &tmp
);
2825 if (0 != btv
->cardid
&& 0xffffffff != btv
->cardid
) {
2826 /* look for the card */
2827 for (type
= -1, i
= 0; cards
[i
].id
!= 0; i
++)
2828 if (cards
[i
].id
== btv
->cardid
)
2833 printk(KERN_INFO
"bttv%d: detected: %s [card=%d], "
2834 "PCI subsystem ID is %04x:%04x\n",
2835 btv
->c
.nr
,cards
[type
].name
,cards
[type
].cardnr
,
2836 btv
->cardid
& 0xffff,
2837 (btv
->cardid
>> 16) & 0xffff);
2838 btv
->c
.type
= cards
[type
].cardnr
;
2841 printk(KERN_INFO
"bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2842 btv
->c
.nr
, btv
->cardid
& 0xffff,
2843 (btv
->cardid
>> 16) & 0xffff);
2844 printk(KERN_DEBUG
"please mail id, board name and "
2845 "the correct card= insmod option to video4linux-list@redhat.com\n");
2849 /* let the user override the autodetected type */
2850 if (card
[btv
->c
.nr
] < bttv_num_tvcards
)
2851 btv
->c
.type
=card
[btv
->c
.nr
];
2853 /* print which card config we are using */
2854 printk(KERN_INFO
"bttv%d: using: %s [card=%d,%s]\n",btv
->c
.nr
,
2855 bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
,
2856 card
[btv
->c
.nr
] < bttv_num_tvcards
2857 ? "insmod option" : "autodetected");
2859 /* overwrite gpio stuff ?? */
2860 if (UNSET
== audioall
&& UNSET
== audiomux
[0])
2863 if (UNSET
!= audiomux
[0]) {
2865 for (i
= 0; i
< 5; i
++) {
2866 bttv_tvcards
[btv
->c
.type
].audiomux
[i
] = audiomux
[i
];
2867 gpiobits
|= audiomux
[i
];
2870 gpiobits
= audioall
;
2871 for (i
= 0; i
< 5; i
++) {
2872 bttv_tvcards
[btv
->c
.type
].audiomux
[i
] = audioall
;
2875 bttv_tvcards
[btv
->c
.type
].gpiomask
= (UNSET
!= gpiomask
) ? gpiomask
: gpiobits
;
2876 printk(KERN_INFO
"bttv%d: gpio config override: mask=0x%x, mux=",
2877 btv
->c
.nr
,bttv_tvcards
[btv
->c
.type
].gpiomask
);
2878 for (i
= 0; i
< 5; i
++) {
2879 printk("%s0x%x", i
? "," : "", bttv_tvcards
[btv
->c
.type
].audiomux
[i
]);
2885 * (most) board specific initialisations goes here
2888 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2889 void identify_by_eeprom(struct bttv
*btv
, unsigned char eeprom_data
[256])
2893 if (0 == strncmp(eeprom_data
,"GET MM20xPCTV",13))
2894 type
= BTTV_BOARD_MODTEC_205
;
2895 else if (0 == strncmp(eeprom_data
+20,"Picolo",7))
2896 type
= BTTV_BOARD_EURESYS_PICOLO
;
2897 else if (eeprom_data
[0] == 0x84 && eeprom_data
[2]== 0)
2898 type
= BTTV_BOARD_HAUPPAUGE
; /* old bt848 */
2902 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2903 btv
->c
.nr
, bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
);
2907 static void flyvideo_gpio(struct bttv
*btv
)
2909 int gpio
,has_remote
,has_radio
,is_capture_only
,is_lr90
,has_tda9820_tda9821
;
2912 gpio_inout(0xffffff, 0);
2913 udelay(8); /* without this we would see the 0x1800 mask */
2915 /* FIXME: must restore OUR_EN ??? */
2917 /* all cards provide GPIO info, some have an additional eeprom
2918 * LR50: GPIO coding can be found lower right CP1 .. CP9
2919 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2921 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2923 * lowest 3 bytes are remote control codes (no handshake needed)
2924 * xxxFFF: No remote control chip soldered
2925 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2926 * Note: Some bits are Audio_Mask !
2928 ttype
=(gpio
&0x0f0000)>>16;
2930 case 0x0: tuner
=2; /* NTSC, e.g. TPI8NSR11P */
2932 case 0x2: tuner
=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
2934 case 0x4: tuner
=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2936 case 0x6: tuner
=37;/* LG PAL (newer TAPC series) TAPC-G702P */
2938 case 0xC: tuner
=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2941 printk(KERN_INFO
"bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv
->c
.nr
);
2944 has_remote
= gpio
& 0x800000;
2945 has_radio
= gpio
& 0x400000;
2946 /* unknown 0x200000;
2947 * unknown2 0x100000; */
2948 is_capture_only
= !(gpio
& 0x008000); /* GPIO15 */
2949 has_tda9820_tda9821
= !(gpio
& 0x004000);
2950 is_lr90
= !(gpio
& 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2952 * gpio & 0x001000 output bit for audio routing */
2955 tuner
=4; /* No tuner present */
2957 printk(KERN_INFO
"bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2958 btv
->c
.nr
, has_radio
? "yes":"no ", has_remote
? "yes":"no ", tuner
, gpio
);
2959 printk(KERN_INFO
"bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2960 btv
->c
.nr
, is_lr90
?"yes":"no ", has_tda9820_tda9821
?"yes":"no ",
2961 is_capture_only
?"yes":"no ");
2963 if(tuner
!= -1) /* only set if known tuner autodetected, else let insmod option through */
2964 btv
->tuner_type
= tuner
;
2965 btv
->has_radio
= has_radio
;
2967 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2968 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2969 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
2970 if(has_tda9820_tda9821
) btv
->audio_hook
= lt9415_audio
;
2971 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
2974 static int miro_tunermap
[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2975 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2976 static int miro_fmtuner
[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2977 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2979 static void miro_pinnacle_gpio(struct bttv
*btv
)
2984 gpio_inout(0xffffff, 0);
2986 id
= ((gpio
>>10) & 63) -1;
2987 msp
= bttv_I2CRead(btv
, I2C_MSP3400
, "MSP34xx");
2989 btv
->tuner_type
= miro_tunermap
[id
];
2990 if (0 == (gpio
& 0x20)) {
2992 if (!miro_fmtuner
[id
]) {
2993 btv
->has_matchbox
= 1;
2994 btv
->mbox_we
= (1<<6);
2995 btv
->mbox_most
= (1<<7);
2996 btv
->mbox_clk
= (1<<8);
2997 btv
->mbox_data
= (1<<9);
2998 btv
->mbox_mask
= (1<<6)|(1<<7)|(1<<8)|(1<<9);
3004 if (btv
->c
.type
== BTTV_BOARD_MIRO
)
3005 btv
->c
.type
= BTTV_BOARD_MIROPRO
;
3006 if (btv
->c
.type
== BTTV_BOARD_PINNACLE
)
3007 btv
->c
.type
= BTTV_BOARD_PINNACLEPRO
;
3010 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3011 btv
->c
.nr
, id
+1, btv
->tuner_type
,
3012 !btv
->has_radio
? "no" :
3013 (btv
->has_matchbox
? "matchbox" : "fmtuner"),
3014 (-1 == msp
) ? "no" : "yes");
3016 /* new cards with microtune tuner */
3021 info
= "PAL / mono";
3024 info
= "PAL+SECAM / stereo";
3028 info
= "NTSC / stereo";
3032 info
= "PAL+SECAM / mono";
3035 info
= "NTSC / mono";
3038 info
= "NTSC / stereo";
3041 info
= "PAL / stereo";
3044 info
= "oops: unknown card";
3048 btv
->c
.type
= BTTV_BOARD_PINNACLEPRO
;
3050 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3051 btv
->c
.nr
, id
, info
, btv
->has_radio
? "yes" : "no");
3052 btv
->tuner_type
= 33;
3053 btv
->pinnacle_id
= id
;
3057 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3058 #define LM1882_SYNC_DRIVE 0x200000L
3060 static void init_ids_eagle(struct bttv
*btv
)
3062 gpio_inout(0xffffff,0xFFFF37);
3063 gpio_write(0x200020);
3065 /* flash strobe inverter ?! */
3066 gpio_write(0x200024);
3068 /* switch sync drive off */
3069 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
3071 /* set BT848 muxel to 2 */
3072 btaor((2)<<5, ~(2<<5), BT848_IFORM
);
3075 /* Muxsel helper for the IDS Eagle.
3076 * the eagles does not use the standard muxsel-bits but
3077 * has its own multiplexer */
3078 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
)
3080 btaor((2)<<5, ~(3<<5), BT848_IFORM
);
3081 gpio_bits(3,bttv_tvcards
[btv
->c
.type
].muxsel
[input
&7]);
3084 /* set chroma ADC to sleep */
3085 btor(BT848_ADC_C_SLEEP
, BT848_ADC
);
3086 /* set to composite video */
3087 btand(~BT848_CONTROL_COMP
, BT848_E_CONTROL
);
3088 btand(~BT848_CONTROL_COMP
, BT848_O_CONTROL
);
3090 /* switch sync drive off */
3091 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
3094 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
)
3096 static const int masks
[] = {0x30, 0x01, 0x12, 0x23};
3097 gpio_write(masks
[input
%4]);
3100 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3103 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3104 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3106 IN - sensor inputs, INx - sensor inputs and TI XORed together
3107 O1,O2,O3 - alarm outputs (relays)
3109 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3113 static void init_lmlbt4x(struct bttv
*btv
)
3115 printk(KERN_DEBUG
"LMLBT4x init\n");
3116 btwrite(0x000000, BT848_GPIO_REG_INP
);
3117 gpio_inout(0xffffff, 0x0006C0);
3118 gpio_write(0x000000);
3121 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
)
3123 unsigned int inmux
= input
% 8;
3124 gpio_inout( 0xf, 0xf );
3125 gpio_bits( 0xf, inmux
);
3128 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
)
3130 unsigned int inmux
= input
% 4;
3131 gpio_inout( 3<<9, 3<<9 );
3132 gpio_bits( 3<<9, inmux
<<9 );
3135 /* ----------------------------------------------------------------------- */
3137 static void bttv_reset_audio(struct bttv
*btv
)
3140 * BT878A has a audio-reset register.
3141 * 1. This register is an audio reset function but it is in
3142 * function-0 (video capture) address space.
3143 * 2. It is enough to do this once per power-up of the card.
3144 * 3. There is a typo in the Conexant doc -- it is not at
3145 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3146 * --//Shrikumar 030609
3152 printk("bttv%d: BT878A ARESET\n",btv
->c
.nr
);
3153 btwrite((1<<7), 0x058);
3158 /* initialization part one -- before registering i2c bus */
3159 void __devinit
bttv_init_card1(struct bttv
*btv
)
3161 switch (btv
->c
.type
) {
3162 case BTTV_BOARD_HAUPPAUGE
:
3163 case BTTV_BOARD_HAUPPAUGE878
:
3164 boot_msp34xx(btv
,5);
3166 case BTTV_BOARD_VOODOOTV_FM
:
3167 boot_msp34xx(btv
,20);
3169 case BTTV_BOARD_AVERMEDIA98
:
3170 boot_msp34xx(btv
,11);
3172 case BTTV_BOARD_HAUPPAUGEPVR
:
3175 case BTTV_BOARD_TWINHAN_DST
:
3176 case BTTV_BOARD_AVDVBT_771
:
3177 case BTTV_BOARD_PINNACLESAT
:
3178 btv
->use_i2c_hw
= 1;
3180 case BTTV_BOARD_ADLINK_RTV24
:
3185 if (!bttv_tvcards
[btv
->c
.type
].has_dvb
)
3186 bttv_reset_audio(btv
);
3189 /* initialization part two -- after registering i2c bus */
3190 void __devinit
bttv_init_card2(struct bttv
*btv
)
3193 int addr
=ADDR_UNSET
, radio_addr
=ADDR_UNSET
;
3195 btv
->tuner_type
= -1;
3197 if (BTTV_BOARD_UNKNOWN
== btv
->c
.type
) {
3198 bttv_readee(btv
,eeprom_data
,0xa0);
3199 identify_by_eeprom(btv
,eeprom_data
);
3202 switch (btv
->c
.type
) {
3203 case BTTV_BOARD_MIRO
:
3204 case BTTV_BOARD_MIROPRO
:
3205 case BTTV_BOARD_PINNACLE
:
3206 case BTTV_BOARD_PINNACLEPRO
:
3208 miro_pinnacle_gpio(btv
);
3210 case BTTV_BOARD_FLYVIDEO_98
:
3211 case BTTV_BOARD_MAXI
:
3212 case BTTV_BOARD_LIFE_FLYKIT
:
3213 case BTTV_BOARD_FLYVIDEO
:
3214 case BTTV_BOARD_TYPHOON_TVIEW
:
3215 case BTTV_BOARD_CHRONOS_VS2
:
3216 case BTTV_BOARD_FLYVIDEO_98FM
:
3217 case BTTV_BOARD_FLYVIDEO2000
:
3218 case BTTV_BOARD_FLYVIDEO98EZ
:
3219 case BTTV_BOARD_CONFERENCETV
:
3220 case BTTV_BOARD_LIFETEC_9415
:
3223 case BTTV_BOARD_HAUPPAUGE
:
3224 case BTTV_BOARD_HAUPPAUGE878
:
3225 case BTTV_BOARD_HAUPPAUGEPVR
:
3226 /* pick up some config infos from the eeprom */
3227 bttv_readee(btv
,eeprom_data
,0xa0);
3228 hauppauge_eeprom(btv
);
3230 case BTTV_BOARD_AVERMEDIA98
:
3231 case BTTV_BOARD_AVPHONE98
:
3232 bttv_readee(btv
,eeprom_data
,0xa0);
3233 avermedia_eeprom(btv
);
3235 case BTTV_BOARD_PXC200
:
3238 case BTTV_BOARD_PICOLO_TETRA_CHIP
:
3239 picolo_tetra_init(btv
);
3241 case BTTV_BOARD_VHX
:
3243 btv
->has_matchbox
= 1;
3244 btv
->mbox_we
= 0x20;
3246 btv
->mbox_clk
= 0x08;
3247 btv
->mbox_data
= 0x10;
3248 btv
->mbox_mask
= 0x38;
3250 case BTTV_BOARD_VOBIS_BOOSTAR
:
3251 case BTTV_BOARD_TERRATV
:
3252 terratec_active_radio_upgrade(btv
);
3254 case BTTV_BOARD_MAGICTVIEW061
:
3255 if (btv
->cardid
== 0x3002144f) {
3257 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv
->c
.nr
);
3260 case BTTV_BOARD_STB2
:
3261 if (btv
->cardid
== 0x3060121a) {
3262 /* Fix up entry for 3DFX VoodooTV 100,
3263 which is an OEM STB card variant. */
3265 btv
->tuner_type
=TUNER_TEMIC_NTSC
;
3268 case BTTV_BOARD_OSPREY1x0
:
3269 case BTTV_BOARD_OSPREY1x0_848
:
3270 case BTTV_BOARD_OSPREY101_848
:
3271 case BTTV_BOARD_OSPREY1x1
:
3272 case BTTV_BOARD_OSPREY1x1_SVID
:
3273 case BTTV_BOARD_OSPREY2xx
:
3274 case BTTV_BOARD_OSPREY2x0_SVID
:
3275 case BTTV_BOARD_OSPREY2x0
:
3276 case BTTV_BOARD_OSPREY500
:
3277 case BTTV_BOARD_OSPREY540
:
3278 case BTTV_BOARD_OSPREY2000
:
3279 bttv_readee(btv
,eeprom_data
,0xa0);
3282 case BTTV_BOARD_IDS_EAGLE
:
3283 init_ids_eagle(btv
);
3285 case BTTV_BOARD_MODTEC_205
:
3286 bttv_readee(btv
,eeprom_data
,0xa0);
3289 case BTTV_BOARD_LMLBT4
:
3292 case BTTV_BOARD_TIBET_CS16
:
3293 tibetCS16_init(btv
);
3295 case BTTV_BOARD_KODICOM_4400R
:
3296 kodicom4400r_init(btv
);
3300 /* pll configuration */
3301 if (!(btv
->id
==848 && btv
->revision
==0x11)) {
3302 /* defaults from card list */
3303 if (PLL_28
== bttv_tvcards
[btv
->c
.type
].pll
) {
3304 btv
->pll
.pll_ifreq
=28636363;
3305 btv
->pll
.pll_crystal
=BT848_IFORM_XT0
;
3307 if (PLL_35
== bttv_tvcards
[btv
->c
.type
].pll
) {
3308 btv
->pll
.pll_ifreq
=35468950;
3309 btv
->pll
.pll_crystal
=BT848_IFORM_XT1
;
3311 /* insmod options can override */
3312 switch (pll
[btv
->c
.nr
]) {
3314 btv
->pll
.pll_crystal
= 0;
3315 btv
->pll
.pll_ifreq
= 0;
3316 btv
->pll
.pll_ofreq
= 0;
3318 case 1: /* 28 MHz */
3320 btv
->pll
.pll_ifreq
= 28636363;
3321 btv
->pll
.pll_ofreq
= 0;
3322 btv
->pll
.pll_crystal
= BT848_IFORM_XT0
;
3324 case 2: /* 35 MHz */
3326 btv
->pll
.pll_ifreq
= 35468950;
3327 btv
->pll
.pll_ofreq
= 0;
3328 btv
->pll
.pll_crystal
= BT848_IFORM_XT1
;
3332 btv
->pll
.pll_current
= -1;
3334 /* tuner configuration (from card list / autodetect / insmod option) */
3335 if (ADDR_UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_addr
)
3336 addr
= bttv_tvcards
[btv
->c
.type
].tuner_addr
;
3338 if (ADDR_UNSET
!= bttv_tvcards
[btv
->c
.type
].radio_addr
)
3339 radio_addr
= bttv_tvcards
[btv
->c
.type
].radio_addr
;
3341 if (UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_type
)
3342 if(UNSET
== btv
->tuner_type
)
3343 btv
->tuner_type
= bttv_tvcards
[btv
->c
.type
].tuner_type
;
3344 if (UNSET
!= tuner
[btv
->c
.nr
])
3345 btv
->tuner_type
= tuner
[btv
->c
.nr
];
3346 printk("bttv%d: using tuner=%d\n",btv
->c
.nr
,btv
->tuner_type
);
3347 if (btv
->pinnacle_id
!= UNSET
)
3348 bttv_call_i2c_clients(btv
, AUDC_CONFIG_PINNACLE
,
3350 if (btv
->tuner_type
!= UNSET
) {
3351 struct tuner_setup tun_setup
;
3353 tun_setup
.mode_mask
= T_ANALOG_TV
| T_DIGITAL_TV
;
3354 tun_setup
.type
= btv
->tuner_type
;
3355 tun_setup
.addr
= addr
;
3357 if (addr
== radio_addr
)
3358 tun_setup
.mode_mask
= T_RADIO
;
3360 bttv_call_i2c_clients(btv
, TUNER_SET_TYPE_ADDR
, &tun_setup
);
3363 btv
->svhs
= bttv_tvcards
[btv
->c
.type
].svhs
;
3364 if (svhs
[btv
->c
.nr
] != UNSET
)
3365 btv
->svhs
= svhs
[btv
->c
.nr
];
3366 if (remote
[btv
->c
.nr
] != UNSET
)
3367 btv
->has_remote
= remote
[btv
->c
.nr
];
3369 if (bttv_tvcards
[btv
->c
.type
].has_radio
)
3371 if (bttv_tvcards
[btv
->c
.type
].has_remote
)
3373 if (!bttv_tvcards
[btv
->c
.type
].no_gpioirq
)
3375 if (bttv_tvcards
[btv
->c
.type
].audio_hook
)
3376 btv
->audio_hook
=bttv_tvcards
[btv
->c
.type
].audio_hook
;
3378 if (bttv_tvcards
[btv
->c
.type
].digital_mode
== DIGITAL_MODE_CAMERA
) {
3379 /* detect Bt832 chip for quartzsight digital camera */
3380 if ((bttv_I2CRead(btv
, I2C_BT832_ALT1
, "Bt832") >=0) ||
3381 (bttv_I2CRead(btv
, I2C_BT832_ALT2
, "Bt832") >=0))
3388 /* try to detect audio/fader chips */
3389 if (!bttv_tvcards
[btv
->c
.type
].no_msp34xx
&&
3390 bttv_I2CRead(btv
, I2C_MSP3400
, "MSP34xx") >=0)
3391 request_module("msp3400");
3393 if (bttv_tvcards
[btv
->c
.type
].msp34xx_alt
&&
3394 bttv_I2CRead(btv
, I2C_MSP3400_ALT
, "MSP34xx (alternate address)") >=0)
3395 request_module("msp3400");
3397 if (!bttv_tvcards
[btv
->c
.type
].no_tda9875
&&
3398 bttv_I2CRead(btv
, I2C_TDA9875
, "TDA9875") >=0)
3399 request_module("tda9875");
3401 if (!bttv_tvcards
[btv
->c
.type
].no_tda7432
&&
3402 bttv_I2CRead(btv
, I2C_TDA7432
, "TDA7432") >=0)
3403 request_module("tda7432");
3405 if (bttv_tvcards
[btv
->c
.type
].needs_tvaudio
)
3406 request_module("tvaudio");
3410 if (btv
->pinnacle_id
!= UNSET
)
3412 if (0 == tda9887
&& 0 == bttv_tvcards
[btv
->c
.type
].has_dvb
&&
3413 bttv_I2CRead(btv
, I2C_TDA9887
, "TDA9887") >=0)
3415 if((btv
->tuner_type
== TUNER_PHILIPS_FM1216ME_MK3
) ||
3416 (btv
->tuner_type
== TUNER_PHILIPS_FM1236_MK3
) ||
3417 (btv
->tuner_type
== TUNER_PHILIPS_FM1256_IH3
) ||
3419 request_module("tda9887");
3420 if (btv
->tuner_type
!= UNSET
)
3421 request_module("tuner");
3425 /* ----------------------------------------------------------------------- */
3427 static void modtec_eeprom(struct bttv
*btv
)
3429 if( strncmp(&(eeprom_data
[0x1e]),"Temic 4066 FY5",14) ==0) {
3430 btv
->tuner_type
=TUNER_TEMIC_4066FY5_PAL_I
;
3431 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3432 btv
->c
.nr
,&eeprom_data
[0x1e]);
3433 } else if (strncmp(&(eeprom_data
[0x1e]),"Alps TSBB5",10) ==0) {
3434 btv
->tuner_type
=TUNER_ALPS_TSBB5_PAL_I
;
3435 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3436 btv
->c
.nr
,&eeprom_data
[0x1e]);
3437 } else if (strncmp(&(eeprom_data
[0x1e]),"Philips FM1246",14) ==0) {
3438 btv
->tuner_type
=TUNER_PHILIPS_NTSC
;
3439 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3440 btv
->c
.nr
,&eeprom_data
[0x1e]);
3442 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3443 btv
->c
.nr
,&eeprom_data
[0x1e]);
3447 static void __devinit
hauppauge_eeprom(struct bttv
*btv
)
3451 tveeprom_hauppauge_analog(&btv
->i2c_client
, &tv
, eeprom_data
);
3452 btv
->tuner_type
= tv
.tuner_type
;
3453 btv
->has_radio
= tv
.has_radio
;
3456 static int terratec_active_radio_upgrade(struct bttv
*btv
)
3461 btv
->has_matchbox
= 1;
3462 btv
->mbox_we
= 0x10;
3463 btv
->mbox_most
= 0x20;
3464 btv
->mbox_clk
= 0x08;
3465 btv
->mbox_data
= 0x04;
3466 btv
->mbox_mask
= 0x3c;
3468 btv
->mbox_iow
= 1 << 8;
3469 btv
->mbox_ior
= 1 << 9;
3470 btv
->mbox_csel
= 1 << 10;
3473 tea5757_write(btv
, 5 * freq
+ 0x358); /* write 0x1ed8 */
3474 if (0x1ed8 == tea5757_read(btv
)) {
3475 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3478 btv
->has_matchbox
= 1;
3481 btv
->has_matchbox
= 0;
3487 /* ----------------------------------------------------------------------- */
3490 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3492 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3493 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3494 * unpacked with unzip).
3496 #define PVR_GPIO_DELAY 10
3498 #define BTTV_ALT_DATA 0x000001
3499 #define BTTV_ALT_DCLK 0x100000
3500 #define BTTV_ALT_NCONFIG 0x800000
3502 static int __devinit
pvr_altera_load(struct bttv
*btv
, u8
*micro
, u32 microlen
)
3508 gpio_inout(0xffffff,BTTV_ALT_DATA
|BTTV_ALT_DCLK
|BTTV_ALT_NCONFIG
);
3510 udelay(PVR_GPIO_DELAY
);
3512 gpio_write(BTTV_ALT_NCONFIG
);
3513 udelay(PVR_GPIO_DELAY
);
3515 for (n
= 0; n
< microlen
; n
++) {
3517 for ( i
= 0 ; i
< 8 ; i
++ ) {
3518 gpio_bits(BTTV_ALT_DCLK
,0);
3520 gpio_bits(BTTV_ALT_DATA
,BTTV_ALT_DATA
);
3522 gpio_bits(BTTV_ALT_DATA
,0);
3523 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3527 gpio_bits(BTTV_ALT_DCLK
,0);
3528 udelay(PVR_GPIO_DELAY
);
3530 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3531 for (i
= 0 ; i
< 30 ; i
++) {
3532 gpio_bits(BTTV_ALT_DCLK
,0);
3533 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3535 gpio_bits(BTTV_ALT_DCLK
,0);
3539 static int __devinit
pvr_boot(struct bttv
*btv
)
3541 const struct firmware
*fw_entry
;
3544 rc
= request_firmware(&fw_entry
, "hcwamc.rbf", &btv
->c
.pci
->dev
);
3546 printk(KERN_WARNING
"bttv%d: no altera firmware [via hotplug]\n",
3550 rc
= pvr_altera_load(btv
, fw_entry
->data
, fw_entry
->size
);
3551 printk(KERN_INFO
"bttv%d: altera firmware upload %s\n",
3552 btv
->c
.nr
, (rc
< 0) ? "failed" : "ok");
3553 release_firmware(fw_entry
);
3557 /* ----------------------------------------------------------------------- */
3558 /* some osprey specific stuff */
3560 static void __devinit
osprey_eeprom(struct bttv
*btv
)
3563 unsigned char *ee
= eeprom_data
;
3564 unsigned long serial
= 0;
3566 if (btv
->c
.type
== 0) {
3567 /* this might be an antique... check for MMAC label in eeprom */
3568 if ((ee
[0]=='M') && (ee
[1]=='M') && (ee
[2]=='A') && (ee
[3]=='C')) {
3569 unsigned char checksum
= 0;
3570 for (i
=0; i
<21; i
++)
3572 if (checksum
!= ee
[21])
3574 btv
->c
.type
= BTTV_BOARD_OSPREY1x0_848
;
3575 for (i
= 12; i
< 21; i
++)
3576 serial
*= 10, serial
+= ee
[i
] - '0';
3579 unsigned short type
;
3582 for(; offset
< 8*16; offset
+= 16) {
3583 unsigned short checksum
= 0;
3584 /* verify the checksum */
3585 for(i
= 0; i
<14; i
++) checksum
+= ee
[i
+offset
];
3586 checksum
= ~checksum
; /* no idea why */
3587 if ((((checksum
>>8)&0x0FF) == ee
[offset
+14]) &&
3588 ((checksum
& 0x0FF) == ee
[offset
+15])) {
3596 /* found a valid descriptor */
3597 type
= (ee
[offset
+4]<<8) | (ee
[offset
+5]);
3603 btv
->c
.type
= BTTV_BOARD_OSPREY1x0_848
;
3606 btv
->c
.type
= BTTV_BOARD_OSPREY101_848
;
3612 btv
->c
.type
= BTTV_BOARD_OSPREY1x0
;
3616 btv
->c
.type
= BTTV_BOARD_OSPREY1x1
;
3621 btv
->c
.type
= BTTV_BOARD_OSPREY1x1_SVID
;
3627 btv
->c
.type
= BTTV_BOARD_OSPREY2xx
;
3631 btv
->c
.type
= BTTV_BOARD_OSPREY2x0_SVID
;
3634 btv
->c
.type
= BTTV_BOARD_OSPREY500
;
3638 btv
->c
.type
= BTTV_BOARD_OSPREY540
;
3639 /* bttv_osprey_540_init(btv); */
3643 btv
->c
.type
= BTTV_BOARD_OSPREY2x0
;
3644 /* enable output on select control lines */
3645 gpio_inout(0xffffff,0x000303);
3648 /* unknown...leave generic, but get serial # */
3651 serial
= (ee
[offset
+6] << 24)
3652 | (ee
[offset
+7] << 16)
3653 | (ee
[offset
+8] << 8)
3657 printk(KERN_INFO
"bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3658 btv
->c
.nr
, btv
->c
.type
, bttv_tvcards
[btv
->c
.type
].name
,serial
);
3661 /* ----------------------------------------------------------------------- */
3662 /* AVermedia specific stuff, from bktr_card.c */
3664 static int tuner_0_table
[] = {
3665 TUNER_PHILIPS_NTSC
, TUNER_PHILIPS_PAL
/* PAL-BG*/,
3666 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
/* PAL-I*/,
3667 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
,
3668 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_SECAM
,
3669 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_PAL
,
3670 TUNER_PHILIPS_FM1216ME_MK3
};
3672 static int tuner_1_table
[] = {
3673 TUNER_TEMIC_NTSC
, TUNER_TEMIC_PAL
,
3674 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3675 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3676 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_4012FY5
, /* TUNER_TEMIC_SECAM */
3677 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_PAL
};
3679 static void __devinit
avermedia_eeprom(struct bttv
*btv
)
3681 int tuner_make
,tuner_tv_fm
,tuner_format
,tuner
=0;
3683 tuner_make
= (eeprom_data
[0x41] & 0x7);
3684 tuner_tv_fm
= (eeprom_data
[0x41] & 0x18) >> 3;
3685 tuner_format
= (eeprom_data
[0x42] & 0xf0) >> 4;
3686 btv
->has_remote
= (eeprom_data
[0x42] & 0x01);
3688 if (tuner_make
== 0 || tuner_make
== 2)
3689 if(tuner_format
<=0x0a)
3690 tuner
= tuner_0_table
[tuner_format
];
3691 if (tuner_make
== 1)
3692 if(tuner_format
<=9)
3693 tuner
= tuner_1_table
[tuner_format
];
3695 if (tuner_make
== 4)
3696 if(tuner_format
== 0x09)
3697 tuner
= TUNER_LG_NTSC_NEW_TAPC
; /* TAPC-G702P */
3699 printk(KERN_INFO
"bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3700 btv
->c
.nr
,eeprom_data
[0x41],eeprom_data
[0x42]);
3702 btv
->tuner_type
=tuner
;
3705 printk("Unknown type");
3706 printk(" radio:%s remote control:%s\n",
3707 tuner_tv_fm
? "yes" : "no",
3708 btv
->has_remote
? "yes" : "no");
3711 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3712 void bttv_tda9880_setnorm(struct bttv
*btv
, int norm
)
3714 /* fix up our card entry */
3715 if(norm
==VIDEO_MODE_NTSC
) {
3716 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[0]=0x957fff;
3717 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[4]=0x957fff;
3718 dprintk("bttv_tda9880_setnorm to NTSC\n");
3721 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[0]=0x947fff;
3722 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[4]=0x947fff;
3723 dprintk("bttv_tda9880_setnorm to PAL\n");
3725 /* set GPIO according */
3726 gpio_bits(bttv_tvcards
[btv
->c
.type
].gpiomask
,
3727 bttv_tvcards
[btv
->c
.type
].audiomux
[btv
->audio
]);
3732 * reset/enable the MSP on some Hauppauge cards
3733 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3738 static void __devinit
boot_msp34xx(struct bttv
*btv
, int pin
)
3740 int mask
= (1 << pin
);
3742 gpio_inout(mask
,mask
);
3745 gpio_bits(mask
,mask
);
3748 bttv_gpio_tracking(btv
,"msp34xx");
3750 printk(KERN_INFO
"bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3751 "init [%d]\n", btv
->c
.nr
, pin
);
3754 static void __devinit
boot_bt832(struct bttv
*btv
)
3758 /* ----------------------------------------------------------------------- */
3759 /* Imagenation L-Model PXC200 Framegrabber */
3760 /* This is basically the same procedure as
3761 * used by Alessandro Rubini in his pxc200
3762 * driver, but using BTTV functions */
3764 static void __devinit
init_PXC200(struct bttv
*btv
)
3766 static int vals
[] __devinitdata
= { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3767 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3773 /* Initialise GPIO-connevted stuff */
3774 gpio_inout(0xffffff, (1<<13));
3778 /* GPIO inputs are pulled up, so no need to drive
3779 * reset pin any longer */
3780 gpio_bits(0xffffff, 0);
3782 bttv_gpio_tracking(btv
,"pxc200");
3784 /* we could/should try and reset/control the AD pots? but
3785 right now we simply turned off the crushing. Without
3786 this the AGC drifts drifts
3787 remember the EN is reverse logic -->
3788 setting BT848_ADC_AGC_EN disable the AGC
3789 tboult@eecs.lehigh.edu
3792 btwrite(BT848_ADC_RESERVED
|BT848_ADC_AGC_EN
, BT848_ADC
);
3794 /* Initialise MAX517 DAC */
3795 printk(KERN_INFO
"Setting DAC reference voltage level ...\n");
3796 bttv_I2CWrite(btv
,0x5E,0,0x80,1);
3798 /* Initialise 12C508 PIC */
3799 /* The I2CWrite and I2CRead commmands are actually to the
3800 * same chips - but the R/W bit is included in the address
3801 * argument so the numbers are different */
3804 printk(KERN_INFO
"Initialising 12C508 PIC chip ...\n");
3806 /* First of all, enable the clock line. This is used in the PXC200-F */
3807 val
= btread(BT848_GPIO_DMA_CTL
);
3808 val
|= BT848_GPIO_DMA_CTL_GPCLKMODE
;
3809 btwrite(val
, BT848_GPIO_DMA_CTL
);
3811 /* Then, push to 0 the reset pin long enough to reset the *
3812 * device same as above for the reset line, but not the same
3813 * value sent to the GPIO-connected stuff
3814 * which one is the good one? */
3815 gpio_inout(0xffffff,(1<<2));
3820 for (i
= 0; i
< ARRAY_SIZE(vals
); i
++) {
3821 tmp
=bttv_I2CWrite(btv
,0x1E,0,vals
[i
],1);
3824 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3825 vals
[i
],tmp
,bttv_I2CRead(btv
,0x1F,NULL
));
3829 printk(KERN_INFO
"PXC200 Initialised.\n");
3834 /* ----------------------------------------------------------------------- */
3836 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3837 * it. This apparently involves the following procedure for each 878 chip:
3839 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3841 * 2) write to GPIO_DATA
3847 * read from GPIO_DATA into buf (uint_32)
3848 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3849 * error. ERROR_CPLD_Check_Failed stop.
3851 * 3) write to GPIO_DATA
3852 * - write 0x4400 + 0x0E
3854 * - write 0x4410 + 0x0E
3857 * read from GPIO_DATA into buf (uint_32)
3858 * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3859 * error. ERROR_CPLD_Check_Failed.
3861 /* ----------------------------------------------------------------------- */
3863 init_RTV24 (struct bttv
*btv
)
3865 uint32_t dataRead
= 0;
3866 long watchdog_value
= 0x0E;
3869 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3872 btwrite (0x00c3feff, BT848_GPIO_OUT_EN
);
3874 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
3876 btwrite (0x10 + watchdog_value
, BT848_GPIO_DATA
);
3878 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
3880 dataRead
= btread (BT848_GPIO_DATA
);
3882 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 1)) {
3884 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3885 btv
->c
.nr
, dataRead
);
3888 btwrite (0x4400 + watchdog_value
, BT848_GPIO_DATA
);
3890 btwrite (0x4410 + watchdog_value
, BT848_GPIO_DATA
);
3892 btwrite (watchdog_value
, BT848_GPIO_DATA
);
3894 dataRead
= btread (BT848_GPIO_DATA
);
3896 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 0)) {
3898 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3899 btv
->c
.nr
, dataRead
);
3905 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv
->c
.nr
);
3910 /* ----------------------------------------------------------------------- */
3911 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3913 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3914 * This code is placed under the terms of the GNU General Public License
3916 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3919 static void bus_low(struct bttv
*btv
, int bit
)
3921 if (btv
->mbox_ior
) {
3922 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3923 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3930 if (btv
->mbox_ior
) {
3931 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3936 static void bus_high(struct bttv
*btv
, int bit
)
3938 if (btv
->mbox_ior
) {
3939 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3940 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3947 if (btv
->mbox_ior
) {
3948 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3953 static int bus_in(struct bttv
*btv
, int bit
)
3955 if (btv
->mbox_ior
) {
3956 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3957 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3960 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3963 return gpio_read() & (bit
);
3966 /* TEA5757 register bits */
3967 #define TEA_FREQ 0:14
3968 #define TEA_BUFFER 15:15
3970 #define TEA_SIGNAL_STRENGTH 16:17
3972 #define TEA_PORT1 18:18
3973 #define TEA_PORT0 19:19
3975 #define TEA_BAND 20:21
3976 #define TEA_BAND_FM 0
3977 #define TEA_BAND_MW 1
3978 #define TEA_BAND_LW 2
3979 #define TEA_BAND_SW 3
3981 #define TEA_MONO 22:22
3982 #define TEA_ALLOW_STEREO 0
3983 #define TEA_FORCE_MONO 1
3985 #define TEA_SEARCH_DIRECTION 23:23
3986 #define TEA_SEARCH_DOWN 0
3987 #define TEA_SEARCH_UP 1
3989 #define TEA_STATUS 24:24
3990 #define TEA_STATUS_TUNED 0
3991 #define TEA_STATUS_SEARCHING 1
3993 /* Low-level stuff */
3994 static int tea5757_read(struct bttv
*btv
)
3996 unsigned long timeout
;
4000 /* better safe than sorry */
4001 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
);
4003 if (btv
->mbox_ior
) {
4004 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4005 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4010 bttv_gpio_tracking(btv
,"tea5757 read");
4012 bus_low(btv
,btv
->mbox_we
);
4013 bus_low(btv
,btv
->mbox_clk
);
4016 timeout
= jiffies
+ HZ
;
4018 /* wait for DATA line to go low; error if it doesn't */
4019 while (bus_in(btv
,btv
->mbox_data
) && time_before(jiffies
, timeout
))
4021 if (bus_in(btv
,btv
->mbox_data
)) {
4022 printk(KERN_WARNING
"bttv%d: tea5757: read timeout\n",btv
->c
.nr
);
4026 dprintk("bttv%d: tea5757:",btv
->c
.nr
);
4027 for(i
= 0; i
< 24; i
++)
4030 bus_high(btv
,btv
->mbox_clk
);
4032 dprintk("%c",(bus_in(btv
,btv
->mbox_most
) == 0)?'T':'-');
4033 bus_low(btv
,btv
->mbox_clk
);
4035 value
|= (bus_in(btv
,btv
->mbox_data
) == 0)?0:1; /* MSB first */
4036 dprintk("%c", (bus_in(btv
,btv
->mbox_most
) == 0)?'S':'M');
4038 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv
->c
.nr
, value
);
4042 static int tea5757_write(struct bttv
*btv
, int value
)
4047 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
| btv
->mbox_data
);
4049 if (btv
->mbox_ior
) {
4050 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4051 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4055 bttv_gpio_tracking(btv
,"tea5757 write");
4057 dprintk("bttv%d: tea5757: write 0x%X\n", btv
->c
.nr
, value
);
4058 bus_low(btv
,btv
->mbox_clk
);
4059 bus_high(btv
,btv
->mbox_we
);
4060 for(i
= 0; i
< 25; i
++)
4062 if (reg
& 0x1000000)
4063 bus_high(btv
,btv
->mbox_data
);
4065 bus_low(btv
,btv
->mbox_data
);
4067 bus_high(btv
,btv
->mbox_clk
);
4069 bus_low(btv
,btv
->mbox_clk
);
4072 bus_low(btv
,btv
->mbox_we
); /* unmute !!! */
4076 void tea5757_set_freq(struct bttv
*btv
, unsigned short freq
)
4078 dprintk("tea5757_set_freq %d\n",freq
);
4079 tea5757_write(btv
, 5 * freq
+ 0x358); /* add 10.7MHz (see docs) */
4083 /* ----------------------------------------------------------------------- */
4086 void winview_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4088 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4089 int bits_out
, loops
, vol
, data
;
4092 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4093 v
->flags
|= VIDEO_AUDIO_VOLUME
;
4097 /* 32 levels logarithmic */
4098 vol
= 32 - ((v
->volume
>>11));
4100 bits_out
= (PT2254_DBS_IN_2
>>(vol
%5));
4102 bits_out
|= (PT2254_DBS_IN_10
>>(vol
/5));
4103 bits_out
|= PT2254_L_CHANNEL
| PT2254_R_CHANNEL
;
4105 data
&= ~(WINVIEW_PT2254_CLK
| WINVIEW_PT2254_DATA
|
4106 WINVIEW_PT2254_STROBE
);
4107 for (loops
= 17; loops
>= 0 ; loops
--) {
4108 if (bits_out
& (1<<loops
))
4109 data
|= WINVIEW_PT2254_DATA
;
4111 data
&= ~WINVIEW_PT2254_DATA
;
4114 data
|= WINVIEW_PT2254_CLK
;
4117 data
&= ~WINVIEW_PT2254_CLK
;
4120 data
|= WINVIEW_PT2254_STROBE
;
4121 data
&= ~WINVIEW_PT2254_DATA
;
4124 data
&= ~WINVIEW_PT2254_STROBE
;
4128 /* ----------------------------------------------------------------------- */
4129 /* mono/stereo control for various cards (which don't use i2c chips but */
4130 /* connect something to the GPIO pins */
4133 gvbctv3pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4135 unsigned int con
= 0;
4138 gpio_inout(0x300, 0x300);
4139 if (v
->mode
& VIDEO_SOUND_LANG1
)
4141 if (v
->mode
& VIDEO_SOUND_LANG2
)
4143 if (v
->mode
& VIDEO_SOUND_STEREO
)
4145 /* if (v->mode & VIDEO_SOUND_MONO)
4147 gpio_bits(0x300, con
);
4149 v
->mode
= VIDEO_SOUND_STEREO
|
4150 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4155 gvbctv5pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4157 unsigned int val
, con
;
4159 if (btv
->radio_user
)
4165 if (v
->mode
& VIDEO_SOUND_LANG2
) {
4166 if (v
->mode
& VIDEO_SOUND_LANG1
) {
4175 if (con
!= (val
& 0x300)) {
4176 gpio_bits(0x300, con
);
4178 bttv_gpio_tracking(btv
,"gvbctv5pci");
4181 switch (val
& 0x70) {
4183 v
->mode
= VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4186 v
->mode
= VIDEO_SOUND_LANG2
;
4189 v
->mode
= VIDEO_SOUND_LANG1
;
4192 v
->mode
= VIDEO_SOUND_STEREO
;
4195 v
->mode
= VIDEO_SOUND_MONO
;
4198 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4199 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4205 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4206 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4207 * 0xdde enables mono and 0xccd enables sap
4209 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4210 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4211 * input/output sound connection, so both must be set for output mode.
4213 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4214 * handles this with a tda9840
4218 avermedia_tvphone_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4223 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
4225 if (v
->mode
& VIDEO_SOUND_STEREO
)
4228 gpio_bits(0x03,val
);
4230 bttv_gpio_tracking(btv
,"avermedia");
4233 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4240 avermedia_tv_stereo_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4245 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
4247 if (v
->mode
& VIDEO_SOUND_STEREO
) /* STEREO */
4249 btaor(val
, ~0x03, BT848_GPIO_DATA
);
4251 bttv_gpio_tracking(btv
,"avermedia");
4253 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4254 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4259 /* Lifetec 9415 handling */
4261 lt9415_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4265 if (gpio_read() & 0x4000) {
4266 v
->mode
= VIDEO_SOUND_MONO
;
4271 if (v
->mode
& VIDEO_SOUND_LANG2
) /* A2 SAP */
4273 if (v
->mode
& VIDEO_SOUND_STEREO
) /* A2 stereo */
4275 if ((v
->mode
& VIDEO_SOUND_LANG1
) ||
4276 (v
->mode
& VIDEO_SOUND_MONO
))
4278 gpio_bits(0x0880, val
);
4280 bttv_gpio_tracking(btv
,"lt9415");
4282 /* autodetect doesn't work with this card :-( */
4283 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4284 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4289 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4291 terratv_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4293 unsigned int con
= 0;
4296 gpio_inout(0x180000,0x180000);
4297 if (v
->mode
& VIDEO_SOUND_LANG2
)
4299 if (v
->mode
& VIDEO_SOUND_STEREO
)
4301 gpio_bits(0x180000, con
);
4303 bttv_gpio_tracking(btv
,"terratv");
4305 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4306 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4311 winfast2000_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4313 unsigned long val
= 0;
4316 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4317 if (v
->mode
& VIDEO_SOUND_MONO
) /* Mono */
4319 if (v
->mode
& VIDEO_SOUND_LANG1
) /* Mono */
4321 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
4323 if (v
->mode
& VIDEO_SOUND_STEREO
) /* Stereo */
4326 gpio_bits(0x430000, val
);
4328 bttv_gpio_tracking(btv
,"winfast2000");
4331 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4332 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4337 * Dariusz Kowalewski <darekk@automex.pl>
4338 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4339 * revision 9B has on-board TDA9874A sound decoder).
4341 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4342 * will mute this cards.
4345 pvbt878p9b_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4347 unsigned int val
= 0;
4349 if (btv
->radio_user
)
4353 if (v
->mode
& VIDEO_SOUND_MONO
) {
4356 if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
4357 || (v
->mode
& VIDEO_SOUND_STEREO
)) {
4361 gpio_bits(0x03,val
);
4363 bttv_gpio_tracking(btv
,"pvbt878p9b");
4366 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4367 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4372 * Dariusz Kowalewski <darekk@automex.pl>
4373 * sound control for FlyVideo 2000S (with tda9874 decoder)
4374 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4377 fv2000s_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4379 unsigned int val
= 0xffff;
4381 if (btv
->radio_user
)
4384 if (v
->mode
& VIDEO_SOUND_MONO
) {
4387 if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
4388 || (v
->mode
& VIDEO_SOUND_STEREO
)) {
4389 val
= 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4391 if (val
!= 0xffff) {
4392 gpio_bits(0x1800, val
);
4394 bttv_gpio_tracking(btv
,"fv2000s");
4397 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4398 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4403 * sound control for Canopus WinDVR PCI
4404 * Masaki Suzuki <masaki@btree.org>
4407 windvr_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4409 unsigned long val
= 0;
4412 if (v
->mode
& VIDEO_SOUND_MONO
)
4414 if (v
->mode
& VIDEO_SOUND_LANG1
)
4416 if (v
->mode
& VIDEO_SOUND_LANG2
)
4418 if (v
->mode
& VIDEO_SOUND_STEREO
)
4421 gpio_bits(0x140000, val
);
4423 bttv_gpio_tracking(btv
,"windvr");
4426 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4427 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4432 * sound control for AD-TVK503
4433 * Hiroshi Takekawa <sian@big.or.jp>
4436 adtvk503_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4438 unsigned int con
= 0xffffff;
4440 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4443 /* btor(***, BT848_GPIO_OUT_EN); */
4444 if (v
->mode
& VIDEO_SOUND_LANG1
)
4446 if (v
->mode
& VIDEO_SOUND_LANG2
)
4448 if (v
->mode
& VIDEO_SOUND_STEREO
)
4450 if (v
->mode
& VIDEO_SOUND_MONO
)
4452 if (con
!= 0xffffff) {
4453 gpio_bits(0x1e0000,con
);
4455 bttv_gpio_tracking(btv
, "adtvk503");
4458 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4459 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4463 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4465 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4466 * switch instead (CD22M3494E). This IC can have multiple active connections
4467 * between Xn (input) and Yn (output) pins. We need to clear any existing
4468 * connection prior to establish a new one, pulsing the STROBE pin.
4470 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4471 * GPIO pins are wired as:
4472 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4473 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4474 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4475 * GPIO[8] - - P3[5] (microcontroler)
4476 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4477 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4478 * GPINTR - - P3[4] (microcontroler)
4480 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4481 * configuration either directly (as we are doing) or using the microcontroler
4482 * which is also wired to I2C interface. I have no further info on the
4483 * microcontroler features, one would need to disassembly the firmware.
4484 * note: the vendor refused to give any information on this product, all
4485 * that stuff was found using a multimeter! :)
4487 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
)
4489 /* reset all conections */
4490 gpio_bits(0x200,0x200);
4492 gpio_bits(0x200,0x000);
4495 /* create a new conection */
4496 gpio_bits(0x480,0x080);
4497 gpio_bits(0x480,0x480);
4499 gpio_bits(0x480,0x080);
4503 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4505 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4506 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4507 * chips, ten eight input analog multiplexors, a not chip and a few
4510 * 16 inputs on a secondary bracket are provided and can be selected
4511 * from each of the four capture chips. Two of the eight input
4512 * multiplexors are used to select from any of the 16 input signals.
4514 * Unsupported hardware capabilities:
4515 * . A video output monitor on the secondary bracket can be selected from
4516 * one of the 878A chips.
4517 * . Another passthrough but I haven't spent any time investigating it.
4518 * . Digital I/O (logic level connected to GPIO) is available from an
4521 * The on chip input mux should always be set to 2.
4522 * GPIO[16:19] - Video input selection
4523 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4524 * GPIO[?:?] - Digital I/O.
4526 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4527 * determined what function (if any) it provides. With the microcontroller
4528 * and sync seperator chips a guess is that it might have to do with video
4529 * switching and maybe some digital I/O.
4531 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
)
4534 gpio_bits(0x0f0000, input
<< 16);
4537 static void tibetCS16_init(struct bttv
*btv
)
4539 /* enable gpio bits, mask obtained via btSpy */
4540 gpio_inout(0xffffff, 0x0f7fff);
4541 gpio_write(0x0f7fff);
4545 * The following routines for the Kodicom-4400r get a little mind-twisting.
4546 * There is a "master" controller and three "slave" controllers, together
4547 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4548 * The analog switch is controlled by the "master", but the detection order
4549 * of the four BT878A chips is in an order which I just don't understand.
4550 * The "master" is actually the second controller to be detected. The
4551 * logic on the board uses logical numbers for the 4 controlers, but
4552 * those numbers are different from the detection sequence. When working
4553 * with the analog switch, we need to "map" from the detection sequence
4554 * over to the board's logical controller number. This mapping sequence
4555 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4556 * unit 3, the second (which is the master) is logical unit 0, etc.
4557 * We need to maintain the status of the analog switch (which of the 16
4558 * cameras is connected to which of the 4 controllers). Rather than
4559 * add to the bttv structure for this, we use the data reserved for
4560 * the mbox (unused for this card type).
4564 * First a routine to set the analog switch, which controls which camera
4565 * is routed to which controller. The switch comprises an X-address
4566 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4567 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4568 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4569 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4570 * specified address. The idea is to set the address and data, then bring
4571 * STROBE high, and finally bring STROBE back to low.
4573 static void kodicom4400r_write(struct bttv
*btv
,
4574 unsigned char xaddr
,
4575 unsigned char yaddr
,
4576 unsigned char data
) {
4579 udata
= (data
<< 7) | ((yaddr
&3) << 4) | (xaddr
&0xf);
4580 gpio_bits(0x1ff, udata
); /* write ADDR and DAT */
4581 gpio_bits(0x1ff, udata
| (1 << 8)); /* strobe high */
4582 gpio_bits(0x1ff, udata
); /* strobe low */
4586 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4587 * use this routine. The routine finds the "master" for the card, maps
4588 * the controller number from the detected position over to the logical
4589 * number, writes the appropriate data to the analog switch, and housekeeps
4590 * the local copy of the switch information. The parameter 'input' is the
4591 * requested camera number (0 - 15).
4593 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
)
4598 static unsigned char map
[4] = {3, 0, 2, 1};
4600 mctlr
= master
[btv
->c
.nr
];
4601 if (mctlr
== NULL
) { /* ignore if master not yet detected */
4604 yaddr
= (btv
->c
.nr
- mctlr
->c
.nr
+ 1) & 3; /* the '&' is for safety */
4606 sw_status
= (char *)(&mctlr
->mbox_we
);
4607 xaddr
= input
& 0xf;
4608 /* Check if the controller/camera pair has changed, else ignore */
4609 if (sw_status
[yaddr
] != xaddr
)
4611 /* "open" the old switch, "close" the new one, save the new */
4612 kodicom4400r_write(mctlr
, sw_status
[yaddr
], yaddr
, 0);
4613 sw_status
[yaddr
] = xaddr
;
4614 kodicom4400r_write(mctlr
, xaddr
, yaddr
, 1);
4619 * During initialisation, we need to reset the analog switch. We
4620 * also preset the switch to map the 4 connectors on the card to the
4621 * *user's* (see above description of kodicom4400r_muxsel) channels
4624 static void kodicom4400r_init(struct bttv
*btv
)
4626 char *sw_status
= (char *)(&btv
->mbox_we
);
4629 gpio_inout(0x0003ff, 0x0003ff);
4630 gpio_write(1 << 9); /* reset MUX */
4632 /* Preset camera 0 to the 4 controllers */
4633 for (ix
=0; ix
<4; ix
++) {
4635 kodicom4400r_write(btv
, ix
, ix
, 1);
4638 * Since this is the "master", we need to set up the
4639 * other three controller chips' pointers to this structure
4640 * for later use in the muxsel routine.
4642 if ((btv
->c
.nr
<1) || (btv
->c
.nr
>BTTV_MAX
-3))
4644 master
[btv
->c
.nr
-1] = btv
;
4645 master
[btv
->c
.nr
] = btv
;
4646 master
[btv
->c
.nr
+1] = btv
;
4647 master
[btv
->c
.nr
+2] = btv
;
4650 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4651 * video multiplexers to provide up to 16 video inputs. These
4652 * multiplexers are controlled by the lower 8 GPIO pins of the
4653 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4655 * xxx0 is pin xxx of multiplexer U5,
4656 * yyy1 is pin yyy of multiplexer U2
4668 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
)
4670 static const int masks
[] = {
4671 ENB0
, ENB0
|IN00
, ENB0
|IN10
, ENB0
|IN00
|IN10
,
4672 ENA0
, ENA0
|IN00
, ENA0
|IN10
, ENA0
|IN00
|IN10
,
4673 ENB1
, ENB1
|IN01
, ENB1
|IN11
, ENB1
|IN01
|IN11
,
4674 ENA1
, ENA1
|IN01
, ENA1
|IN11
, ENA1
|IN01
|IN11
,
4676 gpio_write(masks
[input
%16]);
4678 static void picolo_tetra_init(struct bttv
*btv
)
4680 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4681 btwrite (0x08<<16,BT848_GPIO_DATA
);/*GPIO[19] [==> 4053 B+C] set to 1 */
4682 btwrite (0x04<<16,BT848_GPIO_DATA
);/*GPIO[18] [==> 4053 A] set to 1*/
4684 static void picolo_tetra_muxsel (struct bttv
* btv
, unsigned int input
)
4687 dprintk (KERN_DEBUG
"bttv%d : picolo_tetra_muxsel => input = %d\n",btv
->c
.nr
,input
);
4688 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4689 /*GPIO[20]&GPIO[21] used to choose the right input*/
4690 btwrite (input
<<20,BT848_GPIO_DATA
);
4695 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4697 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4698 * swichers to provide 16 channels to MUX0. The TDA8540's have
4699 * 4 indepedant outputs and as such the IVC120G also has the
4700 * optional "Monitor Out" bus. This allows the card to be looking
4701 * at one input while the monitor is looking at another.
4703 * Since I've couldn't be bothered figuring out how to add an
4704 * independant muxsel for the monitor bus, I've just set it to
4705 * whatever the card is looking at.
4707 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4708 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4710 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4711 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4712 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4713 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4717 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4718 #define I2C_TDA8540 0x90
4719 #define I2C_TDA8540_ALT1 0x92
4720 #define I2C_TDA8540_ALT2 0x94
4721 #define I2C_TDA8540_ALT3 0x96
4722 #define I2C_TDA8540_ALT4 0x98
4723 #define I2C_TDA8540_ALT5 0x9a
4724 #define I2C_TDA8540_ALT6 0x9c
4726 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
)
4729 int key
= input
% 4;
4730 int matrix
= input
/ 4;
4732 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4733 btv
->c
.nr
, input
, matrix
, key
);
4735 /* Handles the input selection on the TDA8540's */
4736 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x00,
4737 ((matrix
== 3) ? (key
| key
<< 2) : 0x00), 1);
4738 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x00,
4739 ((matrix
== 0) ? (key
| key
<< 2) : 0x00), 1);
4740 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x00,
4741 ((matrix
== 1) ? (key
| key
<< 2) : 0x00), 1);
4742 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x00,
4743 ((matrix
== 2) ? (key
| key
<< 2) : 0x00), 1);
4745 /* Handles the output enables on the TDA8540's */
4746 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x02,
4747 ((matrix
== 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4748 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x02,
4749 ((matrix
== 0) ? 0x03 : 0x00), 1); /* 1-4 */
4750 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x02,
4751 ((matrix
== 1) ? 0x03 : 0x00), 1); /* 5-8 */
4752 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x02,
4753 ((matrix
== 2) ? 0x03 : 0x00), 1); /* 9-12 */
4755 /* Selects MUX0 for input on the 878 */
4756 btaor((0)<<5, ~(3<<5), BT848_IFORM
);
4760 /* PXC200 muxsel helper
4761 * luke@syseng.anu.edu.au
4762 * another transplant
4763 * from Alessandro Rubini (rubini@linux.it)
4765 * There are 4 kinds of cards:
4766 * PXC200L which is bt848
4767 * PXC200F which is bt848 with PIC controlling mux
4768 * PXC200AL which is bt878
4769 * PXC200AF which is bt878 with PIC controlling mux
4771 #define PX_CFG_PXC200F 0x01
4772 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4773 #define PX_I2C_PIC 0x0f
4774 #define PX_PXC200A_CARDID 0x200a1295
4775 #define PX_I2C_CMD_CFG 0x00
4777 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
)
4782 unsigned char buf
[2];
4784 /* Read PIC config to determine if this is a PXC200F */
4788 rc
=bttv_I2CWrite(btv
,(PX_I2C_PIC
<<1),buf
[0],buf
[1],1);
4790 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv
->c
.nr
,rc
);
4791 /* not PXC ? do nothing */
4795 rc
=bttv_I2CRead(btv
,(PX_I2C_PIC
<<1),NULL
);
4796 if (!(rc
& PX_CFG_PXC200F
)) {
4797 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv
->c
.nr
,rc
);
4802 /* The multiplexer in the 200F is handled by the GPIO port */
4803 /* get correct mapping between inputs */
4804 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4805 /* ** not needed!? */
4808 /* make sure output pins are enabled */
4809 /* bitmask=0x30f; */
4811 /* check whether we have a PXC200A */
4812 if (btv
->cardid
== PX_PXC200A_CARDID
) {
4813 bitmask
^= 0x180; /* use 7 and 9, not 8 and 9 */
4814 bitmask
|= 7<<4; /* the DAC */
4816 btwrite(bitmask
, BT848_GPIO_OUT_EN
);
4818 bitmask
= btread(BT848_GPIO_DATA
);
4819 if (btv
->cardid
== PX_PXC200A_CARDID
)
4820 bitmask
= (bitmask
& ~0x280) | ((mux
& 2) << 8) | ((mux
& 1) << 7);
4821 else /* older device */
4822 bitmask
= (bitmask
& ~0x300) | ((mux
& 3) << 8);
4823 btwrite(bitmask
,BT848_GPIO_DATA
);
4826 * Was "to be safe, set the bt848 to input 0"
4827 * Actually, since it's ok at load time, better not messing
4828 * with these bits (on PXC200AF you need to set mux 2 here)
4830 * needed because bttv-driver sets mux before calling this function
4832 if (btv
->cardid
== PX_PXC200A_CARDID
)
4833 btaor(2<<5, ~BT848_IFORM_MUXSEL
, BT848_IFORM
);
4834 else /* older device */
4835 btand(~BT848_IFORM_MUXSEL
,BT848_IFORM
);
4837 printk(KERN_DEBUG
"bttv%d: setting input channel to:%d\n", btv
->c
.nr
,(int)mux
);
4840 /* ----------------------------------------------------------------------- */
4841 /* motherboard chipset specific stuff */
4843 void __devinit
bttv_check_chipset(void)
4845 int pcipci_fail
= 0;
4846 struct pci_dev
*dev
= NULL
;
4848 if (pci_pci_problems
& PCIPCI_FAIL
)
4850 if (pci_pci_problems
& (PCIPCI_TRITON
|PCIPCI_NATOMA
|PCIPCI_VIAETBF
))
4852 if (pci_pci_problems
& PCIPCI_VSFX
)
4854 #ifdef PCIPCI_ALIMAGIK
4855 if (pci_pci_problems
& PCIPCI_ALIMAGIK
)
4860 /* print warnings about any quirks found */
4862 printk(KERN_INFO
"bttv: Host bridge needs ETBF enabled.\n");
4864 printk(KERN_INFO
"bttv: Host bridge needs VSFX enabled.\n");
4866 printk(KERN_WARNING
"bttv: BT848 and your chipset may not work together.\n");
4868 printk(KERN_WARNING
"bttv: overlay will be disabled.\n");
4871 printk(KERN_WARNING
"bttv: overlay forced. Use this option at your own risk.\n");
4874 if (UNSET
!= latency
)
4875 printk(KERN_INFO
"bttv: pci latency fixup [%d]\n",latency
);
4876 while ((dev
= pci_get_device(PCI_VENDOR_ID_INTEL
,
4877 PCI_DEVICE_ID_INTEL_82441
, dev
))) {
4879 pci_read_config_byte(dev
, 0x53, &b
);
4881 printk(KERN_INFO
"bttv: Host bridge: 82441FX Natoma, "
4882 "bufcon=0x%02x\n",b
);
4886 int __devinit
bttv_handle_chipset(struct bttv
*btv
)
4888 unsigned char command
;
4890 if (!triton1
&& !vsfx
&& UNSET
== latency
)
4895 printk(KERN_INFO
"bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv
->c
.nr
);
4896 if (vsfx
&& btv
->id
>= 878)
4897 printk(KERN_INFO
"bttv%d: enabling VSFX\n",btv
->c
.nr
);
4898 if (UNSET
!= latency
)
4899 printk(KERN_INFO
"bttv%d: setting pci timer to %d\n",
4903 if (btv
->id
< 878) {
4904 /* bt848 (mis)uses a bit in the irq mask for etbf */
4906 btv
->triton1
= BT848_INT_ETBF
;
4908 /* bt878 has a bit in the pci config space for it */
4909 pci_read_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, &command
);
4911 command
|= BT878_EN_TBFX
;
4913 command
|= BT878_EN_VSFX
;
4914 pci_write_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, command
);
4916 if (UNSET
!= latency
)
4917 pci_write_config_byte(btv
->c
.pci
, PCI_LATENCY_TIMER
, latency
);