projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
irq_domain: correct a minor wrong comment for linear revmap
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/usb.h>
31 #include <media/tuner.h>
32 #include <media/msp3400.h>
33 #include <media/saa7115.h>
34 #include <media/tvp5150.h>
35 #include <media/tvaudio.h>
36 #include <media/mt9v011.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <media/v4l2-chip-ident.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
64 static unsigned long em28xx_devused;
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 static void em28xx_pre_card_setup(struct em28xx *dev);
73
74 /*
75 * Reset sequences for analog/digital modes
76 */
77
78 /* Reset for the most [analog] boards */
79 static struct em28xx_reg_seq default_analog[] = {
80 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
81 { -1, -1, -1, -1},
82 };
83
84 /* Reset for the most [digital] boards */
85 static struct em28xx_reg_seq default_digital[] = {
86 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
87 { -1, -1, -1, -1},
88 };
89
90 /* Board Hauppauge WinTV HVR 900 analog */
91 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
92 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
93 {0x05, 0xff, 0x10, 10},
94 { -1, -1, -1, -1},
95 };
96
97 /* Board Hauppauge WinTV HVR 900 digital */
98 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
99 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
100 {EM2880_R04_GPO, 0x04, 0x0f, 10},
101 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
102 { -1, -1, -1, -1},
103 };
104
105 /* Board Hauppauge WinTV HVR 900 (R2) digital */
106 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
107 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
108 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
109 { -1, -1, -1, -1},
110 };
111
112 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
113 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
114 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
115 { -1, -1, -1, -1},
116 };
117
118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
119
120 /* Board - EM2870 Kworld 355u
121 Analog - No input analog */
122
123 /* Board - EM2882 Kworld 315U digital */
124 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
125 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
126 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
127 {EM2880_R04_GPO, 0x04, 0xff, 10},
128 {EM2880_R04_GPO, 0x0c, 0xff, 10},
129 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
130 { -1, -1, -1, -1},
131 };
132
133 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 {EM2880_R04_GPO, 0x08, 0xff, 10},
137 {EM2880_R04_GPO, 0x0c, 0xff, 10},
138 { -1, -1, -1, -1},
139 };
140
141 static struct em28xx_reg_seq kworld_330u_analog[] = {
142 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
143 {EM2880_R04_GPO, 0x00, 0xff, 10},
144 { -1, -1, -1, -1},
145 };
146
147 static struct em28xx_reg_seq kworld_330u_digital[] = {
148 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
149 {EM2880_R04_GPO, 0x08, 0xff, 10},
150 { -1, -1, -1, -1},
151 };
152
153 /* Evga inDtube
154 GPIO0 - Enable digital power (s5h1409) - low to enable
155 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
156 GPIO4 - xc3028 reset
157 GOP3 - s5h1409 reset
158 */
159 static struct em28xx_reg_seq evga_indtube_analog[] = {
160 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
161 { -1, -1, -1, -1},
162 };
163
164 static struct em28xx_reg_seq evga_indtube_digital[] = {
165 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
166 {EM2880_R04_GPO, 0x04, 0xff, 10},
167 {EM2880_R04_GPO, 0x0c, 0xff, 1},
168 { -1, -1, -1, -1},
169 };
170
171 /*
172 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
173 * EM_GPIO_0 - currently unknown
174 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
175 * EM_GPIO_2 - currently unknown
176 * EM_GPIO_3 - currently unknown
177 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
178 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
179 * EM_GPIO_6 - currently unknown
180 * EM_GPIO_7 - currently unknown
181 */
182 static struct em28xx_reg_seq kworld_a340_digital[] = {
183 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
184 { -1, -1, -1, -1},
185 };
186
187 /* Pinnacle Hybrid Pro eb1a:2881 */
188 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
189 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
190 { -1, -1, -1, -1},
191 };
192
193 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
194 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
195 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
196 {EM2880_R04_GPO, 0x0c, 0xff, 1},
197 { -1, -1, -1, -1},
198 };
199
200 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
201 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
202 {EM2880_R04_GPO, 0x00, 0xff, 10},
203 { -1, -1, -1, -1},
204 };
205
206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
207 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
208 {EM2880_R04_GPO, 0x08, 0xff, 10},
209 { -1, -1, -1, -1},
210 };
211
212 /* eb1a:2868 Reddo DVB-C USB TV Box
213 GPIO4 - CU1216L NIM
214 Other GPIOs seems to be don't care. */
215 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
218 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
219 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
220 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
221 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
222 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
223 {-1, -1, -1, -1},
224 };
225
226 /* Callback for the most boards */
227 static struct em28xx_reg_seq default_tuner_gpio[] = {
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
230 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
231 { -1, -1, -1, -1},
232 };
233
234 /* Mute/unmute */
235 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
236 {EM28XX_R08_GPIO, 5, 7, 10},
237 { -1, -1, -1, -1},
238 };
239
240 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
241 {EM28XX_R08_GPIO, 4, 7, 10},
242 { -1, -1, -1, -1},
243 };
244
245 static struct em28xx_reg_seq compro_mute_gpio[] = {
246 {EM28XX_R08_GPIO, 6, 7, 10},
247 { -1, -1, -1, -1},
248 };
249
250 /* Terratec AV350 */
251 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
252 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
253 { -1, -1, -1, -1},
254 };
255
256 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
257 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
258 { -1, -1, -1, -1},
259 };
260
261 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
262 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
263 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
264 { -1, -1, -1, -1},
265 };
266
267 static struct em28xx_reg_seq vc211a_enable[] = {
268 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
269 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
270 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
271 { -1, -1, -1, -1},
272 };
273
274 static struct em28xx_reg_seq dikom_dk300_digital[] = {
275 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
276 {EM2880_R04_GPO, 0x08, 0xff, 10},
277 { -1, -1, -1, -1},
278 };
279
280
281 /* Reset for the most [digital] boards */
282 static struct em28xx_reg_seq leadership_digital[] = {
283 {EM2874_R80_GPIO, 0x70, 0xff, 10},
284 { -1, -1, -1, -1},
285 };
286
287 static struct em28xx_reg_seq leadership_reset[] = {
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
290 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
291 { -1, -1, -1, -1},
292 };
293
294 /* 2013:024f PCTV nanoStick T2 290e
295 * GPIO_6 - demod reset
296 * GPIO_7 - LED
297 */
298 static struct em28xx_reg_seq pctv_290e[] = {
299 {EM2874_R80_GPIO, 0x00, 0xff, 80},
300 {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
301 {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
302 {-1, -1, -1, -1},
303 };
304
305 #if 0
306 static struct em28xx_reg_seq terratec_h5_gpio[] = {
307 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
308 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
309 {EM2874_R80_GPIO, 0xf2, 0xff, 50},
310 {EM2874_R80_GPIO, 0xf6, 0xff, 50},
311 { -1, -1, -1, -1},
312 };
313
314 static struct em28xx_reg_seq terratec_h5_digital[] = {
315 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
316 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
317 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
318 { -1, -1, -1, -1},
319 };
320 #endif
321
322 /* 2013:024f PCTV DVB-S2 Stick 460e
323 * GPIO_0 - POWER_ON
324 * GPIO_1 - BOOST
325 * GPIO_2 - VUV_LNB (red LED)
326 * GPIO_3 - EXT_12V
327 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
328 * GPIO_5 - INT_LNB
329 * GPIO_6 - RESET_DEM
330 * GPIO_7 - LED (green LED)
331 */
332 static struct em28xx_reg_seq pctv_460e[] = {
333 {EM2874_R80_GPIO, 0x01, 0xff, 50},
334 {0x0d, 0xff, 0xff, 50},
335 {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
336 {0x0d, 0x42, 0xff, 50},
337 {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
338 { -1, -1, -1, -1},
339 };
340
341 #if 0
342 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
343 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
344 {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
345 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
346 {EM2874_R80_GPIO, 0x4f, 0xff, 10},
347 { -1, -1, -1, -1},
348 };
349
350 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
351 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
352 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
353 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
354 { -1, -1, -1, -1},
355 };
356 #endif
357
358 /* 1b80:e425 MaxMedia UB425-TC
359 * GPIO_6 - demod reset, 0=active
360 * GPIO_7 - LED, 0=active
361 */
362 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
363 {EM2874_R80_GPIO, 0x83, 0xff, 100},
364 {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
365 {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
366 {-1, -1, -1, -1},
367 };
368
369 /* 2304:0242 PCTV QuatroStick (510e)
370 * GPIO_2: decoder reset, 0=active
371 * GPIO_4: decoder suspend, 0=active
372 * GPIO_6: demod reset, 0=active
373 * GPIO_7: LED, 1=active
374 */
375 static struct em28xx_reg_seq pctv_510e[] = {
376 {EM2874_R80_GPIO, 0x10, 0xff, 100},
377 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
378 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
379 { -1, -1, -1, -1},
380 };
381
382 /* 2013:0251 PCTV QuatroStick nano (520e)
383 * GPIO_2: decoder reset, 0=active
384 * GPIO_4: decoder suspend, 0=active
385 * GPIO_6: demod reset, 0=active
386 * GPIO_7: LED, 1=active
387 */
388 static struct em28xx_reg_seq pctv_520e[] = {
389 {EM2874_R80_GPIO, 0x10, 0xff, 100},
390 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
391 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
392 {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
393 { -1, -1, -1, -1},
394 };
395
396 /*
397 * Board definitions
398 */
399 struct em28xx_board em28xx_boards[] = {
400 [EM2750_BOARD_UNKNOWN] = {
401 .name = "EM2710/EM2750/EM2751 webcam grabber",
402 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
403 .tuner_type = TUNER_ABSENT,
404 .is_webcam = 1,
405 .input = { {
406 .type = EM28XX_VMUX_COMPOSITE1,
407 .vmux = 0,
408 .amux = EM28XX_AMUX_VIDEO,
409 .gpio = silvercrest_reg_seq,
410 } },
411 },
412 [EM2800_BOARD_UNKNOWN] = {
413 .name = "Unknown EM2800 video grabber",
414 .is_em2800 = 1,
415 .tda9887_conf = TDA9887_PRESENT,
416 .decoder = EM28XX_SAA711X,
417 .tuner_type = TUNER_ABSENT,
418 .input = { {
419 .type = EM28XX_VMUX_COMPOSITE1,
420 .vmux = SAA7115_COMPOSITE0,
421 .amux = EM28XX_AMUX_LINE_IN,
422 }, {
423 .type = EM28XX_VMUX_SVIDEO,
424 .vmux = SAA7115_SVIDEO3,
425 .amux = EM28XX_AMUX_LINE_IN,
426 } },
427 },
428 [EM2820_BOARD_UNKNOWN] = {
429 .name = "Unknown EM2750/28xx video grabber",
430 .tuner_type = TUNER_ABSENT,
431 .is_webcam = 1, /* To enable sensor probe */
432 },
433 [EM2750_BOARD_DLCW_130] = {
434 /* Beijing Huaqi Information Digital Technology Co., Ltd */
435 .name = "Huaqi DLCW-130",
436 .valid = EM28XX_BOARD_NOT_VALIDATED,
437 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
438 .tuner_type = TUNER_ABSENT,
439 .is_webcam = 1,
440 .input = { {
441 .type = EM28XX_VMUX_COMPOSITE1,
442 .vmux = 0,
443 .amux = EM28XX_AMUX_VIDEO,
444 } },
445 },
446 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
447 .name = "Kworld PVR TV 2800 RF",
448 .tuner_type = TUNER_TEMIC_PAL,
449 .tda9887_conf = TDA9887_PRESENT,
450 .decoder = EM28XX_SAA711X,
451 .input = { {
452 .type = EM28XX_VMUX_COMPOSITE1,
453 .vmux = SAA7115_COMPOSITE0,
454 .amux = EM28XX_AMUX_LINE_IN,
455 }, {
456 .type = EM28XX_VMUX_SVIDEO,
457 .vmux = SAA7115_SVIDEO3,
458 .amux = EM28XX_AMUX_LINE_IN,
459 } },
460 },
461 [EM2820_BOARD_GADMEI_TVR200] = {
462 .name = "Gadmei TVR200",
463 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
464 .tda9887_conf = TDA9887_PRESENT,
465 .decoder = EM28XX_SAA711X,
466 .input = { {
467 .type = EM28XX_VMUX_TELEVISION,
468 .vmux = SAA7115_COMPOSITE2,
469 .amux = EM28XX_AMUX_LINE_IN,
470 }, {
471 .type = EM28XX_VMUX_COMPOSITE1,
472 .vmux = SAA7115_COMPOSITE0,
473 .amux = EM28XX_AMUX_LINE_IN,
474 }, {
475 .type = EM28XX_VMUX_SVIDEO,
476 .vmux = SAA7115_SVIDEO3,
477 .amux = EM28XX_AMUX_LINE_IN,
478 } },
479 },
480 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
481 .name = "Terratec Cinergy 250 USB",
482 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
483 .has_ir_i2c = 1,
484 .tda9887_conf = TDA9887_PRESENT,
485 .decoder = EM28XX_SAA711X,
486 .input = { {
487 .type = EM28XX_VMUX_TELEVISION,
488 .vmux = SAA7115_COMPOSITE2,
489 .amux = EM28XX_AMUX_LINE_IN,
490 }, {
491 .type = EM28XX_VMUX_COMPOSITE1,
492 .vmux = SAA7115_COMPOSITE0,
493 .amux = EM28XX_AMUX_LINE_IN,
494 }, {
495 .type = EM28XX_VMUX_SVIDEO,
496 .vmux = SAA7115_SVIDEO3,
497 .amux = EM28XX_AMUX_LINE_IN,
498 } },
499 },
500 [EM2820_BOARD_PINNACLE_USB_2] = {
501 .name = "Pinnacle PCTV USB 2",
502 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
503 .has_ir_i2c = 1,
504 .tda9887_conf = TDA9887_PRESENT,
505 .decoder = EM28XX_SAA711X,
506 .input = { {
507 .type = EM28XX_VMUX_TELEVISION,
508 .vmux = SAA7115_COMPOSITE2,
509 .amux = EM28XX_AMUX_VIDEO,
510 }, {
511 .type = EM28XX_VMUX_COMPOSITE1,
512 .vmux = SAA7115_COMPOSITE0,
513 .amux = EM28XX_AMUX_LINE_IN,
514 }, {
515 .type = EM28XX_VMUX_SVIDEO,
516 .vmux = SAA7115_SVIDEO3,
517 .amux = EM28XX_AMUX_LINE_IN,
518 } },
519 },
520 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
521 .name = "Hauppauge WinTV USB 2",
522 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
523 .tda9887_conf = TDA9887_PRESENT |
524 TDA9887_PORT1_ACTIVE |
525 TDA9887_PORT2_ACTIVE,
526 .decoder = EM28XX_TVP5150,
527 .has_msp34xx = 1,
528 .has_ir_i2c = 1,
529 .input = { {
530 .type = EM28XX_VMUX_TELEVISION,
531 .vmux = TVP5150_COMPOSITE0,
532 .amux = MSP_INPUT_DEFAULT,
533 }, {
534 .type = EM28XX_VMUX_SVIDEO,
535 .vmux = TVP5150_SVIDEO,
536 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
537 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
538 } },
539 },
540 [EM2820_BOARD_DLINK_USB_TV] = {
541 .name = "D-Link DUB-T210 TV Tuner",
542 .valid = EM28XX_BOARD_NOT_VALIDATED,
543 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
544 .tda9887_conf = TDA9887_PRESENT,
545 .decoder = EM28XX_SAA711X,
546 .input = { {
547 .type = EM28XX_VMUX_TELEVISION,
548 .vmux = SAA7115_COMPOSITE2,
549 .amux = EM28XX_AMUX_LINE_IN,
550 }, {
551 .type = EM28XX_VMUX_COMPOSITE1,
552 .vmux = SAA7115_COMPOSITE0,
553 .amux = EM28XX_AMUX_LINE_IN,
554 }, {
555 .type = EM28XX_VMUX_SVIDEO,
556 .vmux = SAA7115_SVIDEO3,
557 .amux = EM28XX_AMUX_LINE_IN,
558 } },
559 },
560 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
561 .name = "Hercules Smart TV USB 2.0",
562 .valid = EM28XX_BOARD_NOT_VALIDATED,
563 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
564 .tda9887_conf = TDA9887_PRESENT,
565 .decoder = EM28XX_SAA711X,
566 .input = { {
567 .type = EM28XX_VMUX_TELEVISION,
568 .vmux = SAA7115_COMPOSITE2,
569 .amux = EM28XX_AMUX_LINE_IN,
570 }, {
571 .type = EM28XX_VMUX_COMPOSITE1,
572 .vmux = SAA7115_COMPOSITE0,
573 .amux = EM28XX_AMUX_LINE_IN,
574 }, {
575 .type = EM28XX_VMUX_SVIDEO,
576 .vmux = SAA7115_SVIDEO3,
577 .amux = EM28XX_AMUX_LINE_IN,
578 } },
579 },
580 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
581 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
582 .valid = EM28XX_BOARD_NOT_VALIDATED,
583 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
584 .tda9887_conf = TDA9887_PRESENT,
585 .decoder = EM28XX_SAA711X,
586 .input = { {
587 .type = EM28XX_VMUX_TELEVISION,
588 .vmux = SAA7115_COMPOSITE2,
589 .amux = EM28XX_AMUX_VIDEO,
590 }, {
591 .type = EM28XX_VMUX_COMPOSITE1,
592 .vmux = SAA7115_COMPOSITE0,
593 .amux = EM28XX_AMUX_LINE_IN,
594 }, {
595 .type = EM28XX_VMUX_SVIDEO,
596 .vmux = SAA7115_SVIDEO3,
597 .amux = EM28XX_AMUX_LINE_IN,
598 } },
599 },
600 [EM2820_BOARD_GADMEI_UTV310] = {
601 .name = "Gadmei UTV310",
602 .valid = EM28XX_BOARD_NOT_VALIDATED,
603 .tuner_type = TUNER_TNF_5335MF,
604 .tda9887_conf = TDA9887_PRESENT,
605 .decoder = EM28XX_SAA711X,
606 .input = { {
607 .type = EM28XX_VMUX_TELEVISION,
608 .vmux = SAA7115_COMPOSITE1,
609 .amux = EM28XX_AMUX_LINE_IN,
610 }, {
611 .type = EM28XX_VMUX_COMPOSITE1,
612 .vmux = SAA7115_COMPOSITE0,
613 .amux = EM28XX_AMUX_LINE_IN,
614 }, {
615 .type = EM28XX_VMUX_SVIDEO,
616 .vmux = SAA7115_SVIDEO3,
617 .amux = EM28XX_AMUX_LINE_IN,
618 } },
619 },
620 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
621 .name = "Leadtek Winfast USB II Deluxe",
622 .valid = EM28XX_BOARD_NOT_VALIDATED,
623 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
624 .has_ir_i2c = 1,
625 .tvaudio_addr = 0x58,
626 .tda9887_conf = TDA9887_PRESENT |
627 TDA9887_PORT2_ACTIVE |
628 TDA9887_QSS,
629 .decoder = EM28XX_SAA711X,
630 .adecoder = EM28XX_TVAUDIO,
631 .input = { {
632 .type = EM28XX_VMUX_TELEVISION,
633 .vmux = SAA7115_COMPOSITE4,
634 .amux = EM28XX_AMUX_AUX,
635 }, {
636 .type = EM28XX_VMUX_COMPOSITE1,
637 .vmux = SAA7115_COMPOSITE5,
638 .amux = EM28XX_AMUX_LINE_IN,
639 }, {
640 .type = EM28XX_VMUX_SVIDEO,
641 .vmux = SAA7115_SVIDEO3,
642 .amux = EM28XX_AMUX_LINE_IN,
643 } },
644 .radio = {
645 .type = EM28XX_RADIO,
646 .amux = EM28XX_AMUX_AUX,
647 }
648 },
649 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
650 .name = "Videology 20K14XUSB USB2.0",
651 .valid = EM28XX_BOARD_NOT_VALIDATED,
652 .tuner_type = TUNER_ABSENT,
653 .is_webcam = 1,
654 .input = { {
655 .type = EM28XX_VMUX_COMPOSITE1,
656 .vmux = 0,
657 .amux = EM28XX_AMUX_VIDEO,
658 } },
659 },
660 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
661 .name = "Silvercrest Webcam 1.3mpix",
662 .tuner_type = TUNER_ABSENT,
663 .is_webcam = 1,
664 .input = { {
665 .type = EM28XX_VMUX_COMPOSITE1,
666 .vmux = 0,
667 .amux = EM28XX_AMUX_VIDEO,
668 .gpio = silvercrest_reg_seq,
669 } },
670 },
671 [EM2821_BOARD_SUPERCOMP_USB_2] = {
672 .name = "Supercomp USB 2.0 TV",
673 .valid = EM28XX_BOARD_NOT_VALIDATED,
674 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
675 .tda9887_conf = TDA9887_PRESENT |
676 TDA9887_PORT1_ACTIVE |
677 TDA9887_PORT2_ACTIVE,
678 .decoder = EM28XX_SAA711X,
679 .input = { {
680 .type = EM28XX_VMUX_TELEVISION,
681 .vmux = SAA7115_COMPOSITE2,
682 .amux = EM28XX_AMUX_LINE_IN,
683 }, {
684 .type = EM28XX_VMUX_COMPOSITE1,
685 .vmux = SAA7115_COMPOSITE0,
686 .amux = EM28XX_AMUX_VIDEO,
687 }, {
688 .type = EM28XX_VMUX_SVIDEO,
689 .vmux = SAA7115_SVIDEO3,
690 .amux = EM28XX_AMUX_LINE_IN,
691 } },
692 },
693 [EM2821_BOARD_USBGEAR_VD204] = {
694 .name = "Usbgear VD204v9",
695 .valid = EM28XX_BOARD_NOT_VALIDATED,
696 .tuner_type = TUNER_ABSENT, /* Capture only device */
697 .decoder = EM28XX_SAA711X,
698 .input = { {
699 .type = EM28XX_VMUX_COMPOSITE1,
700 .vmux = SAA7115_COMPOSITE0,
701 .amux = EM28XX_AMUX_LINE_IN,
702 }, {
703 .type = EM28XX_VMUX_SVIDEO,
704 .vmux = SAA7115_SVIDEO3,
705 .amux = EM28XX_AMUX_LINE_IN,
706 } },
707 },
708 [EM2860_BOARD_NETGMBH_CAM] = {
709 /* Beijing Huaqi Information Digital Technology Co., Ltd */
710 .name = "NetGMBH Cam",
711 .valid = EM28XX_BOARD_NOT_VALIDATED,
712 .tuner_type = TUNER_ABSENT,
713 .is_webcam = 1,
714 .input = { {
715 .type = EM28XX_VMUX_COMPOSITE1,
716 .vmux = 0,
717 .amux = EM28XX_AMUX_VIDEO,
718 } },
719 },
720 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
721 .name = "Typhoon DVD Maker",
722 .decoder = EM28XX_SAA711X,
723 .tuner_type = TUNER_ABSENT, /* Capture only device */
724 .input = { {
725 .type = EM28XX_VMUX_COMPOSITE1,
726 .vmux = SAA7115_COMPOSITE0,
727 .amux = EM28XX_AMUX_LINE_IN,
728 }, {
729 .type = EM28XX_VMUX_SVIDEO,
730 .vmux = SAA7115_SVIDEO3,
731 .amux = EM28XX_AMUX_LINE_IN,
732 } },
733 },
734 [EM2860_BOARD_GADMEI_UTV330] = {
735 .name = "Gadmei UTV330",
736 .valid = EM28XX_BOARD_NOT_VALIDATED,
737 .tuner_type = TUNER_TNF_5335MF,
738 .tda9887_conf = TDA9887_PRESENT,
739 .decoder = EM28XX_SAA711X,
740 .input = { {
741 .type = EM28XX_VMUX_TELEVISION,
742 .vmux = SAA7115_COMPOSITE2,
743 .amux = EM28XX_AMUX_VIDEO,
744 }, {
745 .type = EM28XX_VMUX_COMPOSITE1,
746 .vmux = SAA7115_COMPOSITE0,
747 .amux = EM28XX_AMUX_LINE_IN,
748 }, {
749 .type = EM28XX_VMUX_SVIDEO,
750 .vmux = SAA7115_SVIDEO3,
751 .amux = EM28XX_AMUX_LINE_IN,
752 } },
753 },
754 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
755 .name = "Gadmei UTV330+",
756 .tuner_type = TUNER_TNF_5335MF,
757 .tda9887_conf = TDA9887_PRESENT,
758 .ir_codes = RC_MAP_GADMEI_RM008Z,
759 .decoder = EM28XX_SAA711X,
760 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
761 .input = { {
762 .type = EM28XX_VMUX_TELEVISION,
763 .vmux = SAA7115_COMPOSITE2,
764 .amux = EM28XX_AMUX_VIDEO,
765 }, {
766 .type = EM28XX_VMUX_COMPOSITE1,
767 .vmux = SAA7115_COMPOSITE0,
768 .amux = EM28XX_AMUX_LINE_IN,
769 }, {
770 .type = EM28XX_VMUX_SVIDEO,
771 .vmux = SAA7115_SVIDEO3,
772 .amux = EM28XX_AMUX_LINE_IN,
773 } },
774 },
775 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
776 .name = "Terratec Cinergy A Hybrid XS",
777 .valid = EM28XX_BOARD_NOT_VALIDATED,
778 .tuner_type = TUNER_XC2028,
779 .tuner_gpio = default_tuner_gpio,
780 .decoder = EM28XX_TVP5150,
781
782 .input = { {
783 .type = EM28XX_VMUX_TELEVISION,
784 .vmux = TVP5150_COMPOSITE0,
785 .amux = EM28XX_AMUX_VIDEO,
786 .gpio = hauppauge_wintv_hvr_900_analog,
787 }, {
788 .type = EM28XX_VMUX_COMPOSITE1,
789 .vmux = TVP5150_COMPOSITE1,
790 .amux = EM28XX_AMUX_LINE_IN,
791 .gpio = hauppauge_wintv_hvr_900_analog,
792 }, {
793 .type = EM28XX_VMUX_SVIDEO,
794 .vmux = TVP5150_SVIDEO,
795 .amux = EM28XX_AMUX_LINE_IN,
796 .gpio = hauppauge_wintv_hvr_900_analog,
797 } },
798 },
799 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
800 .name = "KWorld PVRTV 300U",
801 .valid = EM28XX_BOARD_NOT_VALIDATED,
802 .tuner_type = TUNER_XC2028,
803 .tuner_gpio = default_tuner_gpio,
804 .decoder = EM28XX_TVP5150,
805 .input = { {
806 .type = EM28XX_VMUX_TELEVISION,
807 .vmux = TVP5150_COMPOSITE0,
808 .amux = EM28XX_AMUX_VIDEO,
809 }, {
810 .type = EM28XX_VMUX_COMPOSITE1,
811 .vmux = TVP5150_COMPOSITE1,
812 .amux = EM28XX_AMUX_LINE_IN,
813 }, {
814 .type = EM28XX_VMUX_SVIDEO,
815 .vmux = TVP5150_SVIDEO,
816 .amux = EM28XX_AMUX_LINE_IN,
817 } },
818 },
819 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
820 .name = "Yakumo MovieMixer",
821 .tuner_type = TUNER_ABSENT, /* Capture only device */
822 .decoder = EM28XX_TVP5150,
823 .input = { {
824 .type = EM28XX_VMUX_TELEVISION,
825 .vmux = TVP5150_COMPOSITE0,
826 .amux = EM28XX_AMUX_VIDEO,
827 }, {
828 .type = EM28XX_VMUX_COMPOSITE1,
829 .vmux = TVP5150_COMPOSITE1,
830 .amux = EM28XX_AMUX_LINE_IN,
831 }, {
832 .type = EM28XX_VMUX_SVIDEO,
833 .vmux = TVP5150_SVIDEO,
834 .amux = EM28XX_AMUX_LINE_IN,
835 } },
836 },
837 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
838 .name = "EM2860/TVP5150 Reference Design",
839 .tuner_type = TUNER_ABSENT, /* Capture only device */
840 .decoder = EM28XX_TVP5150,
841 .input = { {
842 .type = EM28XX_VMUX_COMPOSITE1,
843 .vmux = TVP5150_COMPOSITE1,
844 .amux = EM28XX_AMUX_LINE_IN,
845 }, {
846 .type = EM28XX_VMUX_SVIDEO,
847 .vmux = TVP5150_SVIDEO,
848 .amux = EM28XX_AMUX_LINE_IN,
849 } },
850 },
851 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
852 .name = "Plextor ConvertX PX-TV100U",
853 .tuner_type = TUNER_TNF_5335MF,
854 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
855 EM28XX_XCLK_FREQUENCY_12MHZ,
856 .tda9887_conf = TDA9887_PRESENT,
857 .decoder = EM28XX_TVP5150,
858 .has_msp34xx = 1,
859 .input = { {
860 .type = EM28XX_VMUX_TELEVISION,
861 .vmux = TVP5150_COMPOSITE0,
862 .amux = EM28XX_AMUX_LINE_IN,
863 .gpio = pinnacle_hybrid_pro_analog,
864 }, {
865 .type = EM28XX_VMUX_COMPOSITE1,
866 .vmux = TVP5150_COMPOSITE1,
867 .amux = EM28XX_AMUX_LINE_IN,
868 .gpio = pinnacle_hybrid_pro_analog,
869 }, {
870 .type = EM28XX_VMUX_SVIDEO,
871 .vmux = TVP5150_SVIDEO,
872 .amux = EM28XX_AMUX_LINE_IN,
873 .gpio = pinnacle_hybrid_pro_analog,
874 } },
875 },
876
877 /* Those boards with em2870 are DVB Only*/
878
879 [EM2870_BOARD_TERRATEC_XS] = {
880 .name = "Terratec Cinergy T XS",
881 .valid = EM28XX_BOARD_NOT_VALIDATED,
882 .tuner_type = TUNER_XC2028,
883 .tuner_gpio = default_tuner_gpio,
884 },
885 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
886 .name = "Terratec Cinergy T XS (MT2060)",
887 .valid = EM28XX_BOARD_NOT_VALIDATED,
888 .tuner_type = TUNER_ABSENT, /* MT2060 */
889 },
890 [EM2870_BOARD_KWORLD_350U] = {
891 .name = "Kworld 350 U DVB-T",
892 .valid = EM28XX_BOARD_NOT_VALIDATED,
893 .tuner_type = TUNER_XC2028,
894 .tuner_gpio = default_tuner_gpio,
895 },
896 [EM2870_BOARD_KWORLD_355U] = {
897 .name = "Kworld 355 U DVB-T",
898 .valid = EM28XX_BOARD_NOT_VALIDATED,
899 .tuner_type = TUNER_ABSENT,
900 .tuner_gpio = default_tuner_gpio,
901 .has_dvb = 1,
902 .dvb_gpio = default_digital,
903 },
904 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
905 .name = "Pinnacle PCTV DVB-T",
906 .valid = EM28XX_BOARD_NOT_VALIDATED,
907 .tuner_type = TUNER_ABSENT, /* MT2060 */
908 /* djh - I have serious doubts this is right... */
909 .xclk = EM28XX_XCLK_IR_RC5_MODE |
910 EM28XX_XCLK_FREQUENCY_10MHZ,
911 },
912 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
913 .name = "Compro, VideoMate U3",
914 .valid = EM28XX_BOARD_NOT_VALIDATED,
915 .tuner_type = TUNER_ABSENT, /* MT2060 */
916 },
917
918 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
919 .name = "Terratec Hybrid XS Secam",
920 .has_msp34xx = 1,
921 .tuner_type = TUNER_XC2028,
922 .tuner_gpio = default_tuner_gpio,
923 .decoder = EM28XX_TVP5150,
924 .has_dvb = 1,
925 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
926 .input = { {
927 .type = EM28XX_VMUX_TELEVISION,
928 .vmux = TVP5150_COMPOSITE0,
929 .amux = EM28XX_AMUX_VIDEO,
930 .gpio = terratec_cinergy_USB_XS_FR_analog,
931 }, {
932 .type = EM28XX_VMUX_COMPOSITE1,
933 .vmux = TVP5150_COMPOSITE1,
934 .amux = EM28XX_AMUX_LINE_IN,
935 .gpio = terratec_cinergy_USB_XS_FR_analog,
936 }, {
937 .type = EM28XX_VMUX_SVIDEO,
938 .vmux = TVP5150_SVIDEO,
939 .amux = EM28XX_AMUX_LINE_IN,
940 .gpio = terratec_cinergy_USB_XS_FR_analog,
941 } },
942 },
943 [EM2884_BOARD_TERRATEC_H5] = {
944 .name = "Terratec Cinergy H5",
945 .has_dvb = 1,
946 #if 0
947 .tuner_type = TUNER_PHILIPS_TDA8290,
948 .tuner_addr = 0x41,
949 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
950 .tuner_gpio = terratec_h5_gpio,
951 #else
952 .tuner_type = TUNER_ABSENT,
953 #endif
954 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
955 EM28XX_I2C_CLK_WAIT_ENABLE |
956 EM28XX_I2C_FREQ_400_KHZ,
957 },
958 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
959 .name = "Hauppauge WinTV HVR 930C",
960 .has_dvb = 1,
961 #if 0 /* FIXME: Add analog support */
962 .tuner_type = TUNER_XC5000,
963 .tuner_addr = 0x41,
964 .dvb_gpio = hauppauge_930c_digital,
965 .tuner_gpio = hauppauge_930c_gpio,
966 #else
967 .tuner_type = TUNER_ABSENT,
968 #endif
969 .ir_codes = RC_MAP_HAUPPAUGE,
970 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
971 EM28XX_I2C_CLK_WAIT_ENABLE |
972 EM28XX_I2C_FREQ_400_KHZ,
973 },
974 [EM2884_BOARD_CINERGY_HTC_STICK] = {
975 .name = "Terratec Cinergy HTC Stick",
976 .has_dvb = 1,
977 #if 0
978 .tuner_type = TUNER_PHILIPS_TDA8290,
979 .tuner_addr = 0x41,
980 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
981 .tuner_gpio = terratec_h5_gpio,
982 #endif
983 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
984 EM28XX_I2C_CLK_WAIT_ENABLE |
985 EM28XX_I2C_FREQ_400_KHZ,
986 },
987 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
988 .name = "Hauppauge WinTV HVR 900",
989 .tda9887_conf = TDA9887_PRESENT,
990 .tuner_type = TUNER_XC2028,
991 .tuner_gpio = default_tuner_gpio,
992 .mts_firmware = 1,
993 .has_dvb = 1,
994 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
995 .ir_codes = RC_MAP_HAUPPAUGE,
996 .decoder = EM28XX_TVP5150,
997 .input = { {
998 .type = EM28XX_VMUX_TELEVISION,
999 .vmux = TVP5150_COMPOSITE0,
1000 .amux = EM28XX_AMUX_VIDEO,
1001 .gpio = hauppauge_wintv_hvr_900_analog,
1002 }, {
1003 .type = EM28XX_VMUX_COMPOSITE1,
1004 .vmux = TVP5150_COMPOSITE1,
1005 .amux = EM28XX_AMUX_LINE_IN,
1006 .gpio = hauppauge_wintv_hvr_900_analog,
1007 }, {
1008 .type = EM28XX_VMUX_SVIDEO,
1009 .vmux = TVP5150_SVIDEO,
1010 .amux = EM28XX_AMUX_LINE_IN,
1011 .gpio = hauppauge_wintv_hvr_900_analog,
1012 } },
1013 },
1014 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1015 .name = "Hauppauge WinTV HVR 900 (R2)",
1016 .tda9887_conf = TDA9887_PRESENT,
1017 .tuner_type = TUNER_XC2028,
1018 .tuner_gpio = default_tuner_gpio,
1019 .mts_firmware = 1,
1020 .has_dvb = 1,
1021 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1022 .ir_codes = RC_MAP_HAUPPAUGE,
1023 .decoder = EM28XX_TVP5150,
1024 .input = { {
1025 .type = EM28XX_VMUX_TELEVISION,
1026 .vmux = TVP5150_COMPOSITE0,
1027 .amux = EM28XX_AMUX_VIDEO,
1028 .gpio = hauppauge_wintv_hvr_900_analog,
1029 }, {
1030 .type = EM28XX_VMUX_COMPOSITE1,
1031 .vmux = TVP5150_COMPOSITE1,
1032 .amux = EM28XX_AMUX_LINE_IN,
1033 .gpio = hauppauge_wintv_hvr_900_analog,
1034 }, {
1035 .type = EM28XX_VMUX_SVIDEO,
1036 .vmux = TVP5150_SVIDEO,
1037 .amux = EM28XX_AMUX_LINE_IN,
1038 .gpio = hauppauge_wintv_hvr_900_analog,
1039 } },
1040 },
1041 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1042 .name = "Hauppauge WinTV HVR 850",
1043 .tuner_type = TUNER_XC2028,
1044 .tuner_gpio = default_tuner_gpio,
1045 .mts_firmware = 1,
1046 .has_dvb = 1,
1047 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1048 .ir_codes = RC_MAP_HAUPPAUGE,
1049 .decoder = EM28XX_TVP5150,
1050 .input = { {
1051 .type = EM28XX_VMUX_TELEVISION,
1052 .vmux = TVP5150_COMPOSITE0,
1053 .amux = EM28XX_AMUX_VIDEO,
1054 .gpio = hauppauge_wintv_hvr_900_analog,
1055 }, {
1056 .type = EM28XX_VMUX_COMPOSITE1,
1057 .vmux = TVP5150_COMPOSITE1,
1058 .amux = EM28XX_AMUX_LINE_IN,
1059 .gpio = hauppauge_wintv_hvr_900_analog,
1060 }, {
1061 .type = EM28XX_VMUX_SVIDEO,
1062 .vmux = TVP5150_SVIDEO,
1063 .amux = EM28XX_AMUX_LINE_IN,
1064 .gpio = hauppauge_wintv_hvr_900_analog,
1065 } },
1066 },
1067 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1068 .name = "Hauppauge WinTV HVR 950",
1069 .tuner_type = TUNER_XC2028,
1070 .tuner_gpio = default_tuner_gpio,
1071 .mts_firmware = 1,
1072 .has_dvb = 1,
1073 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1074 .ir_codes = RC_MAP_HAUPPAUGE,
1075 .decoder = EM28XX_TVP5150,
1076 .input = { {
1077 .type = EM28XX_VMUX_TELEVISION,
1078 .vmux = TVP5150_COMPOSITE0,
1079 .amux = EM28XX_AMUX_VIDEO,
1080 .gpio = hauppauge_wintv_hvr_900_analog,
1081 }, {
1082 .type = EM28XX_VMUX_COMPOSITE1,
1083 .vmux = TVP5150_COMPOSITE1,
1084 .amux = EM28XX_AMUX_LINE_IN,
1085 .gpio = hauppauge_wintv_hvr_900_analog,
1086 }, {
1087 .type = EM28XX_VMUX_SVIDEO,
1088 .vmux = TVP5150_SVIDEO,
1089 .amux = EM28XX_AMUX_LINE_IN,
1090 .gpio = hauppauge_wintv_hvr_900_analog,
1091 } },
1092 },
1093 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1094 .name = "Pinnacle PCTV HD Pro Stick",
1095 .tuner_type = TUNER_XC2028,
1096 .tuner_gpio = default_tuner_gpio,
1097 .mts_firmware = 1,
1098 .has_dvb = 1,
1099 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1100 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1101 .decoder = EM28XX_TVP5150,
1102 .input = { {
1103 .type = EM28XX_VMUX_TELEVISION,
1104 .vmux = TVP5150_COMPOSITE0,
1105 .amux = EM28XX_AMUX_VIDEO,
1106 .gpio = hauppauge_wintv_hvr_900_analog,
1107 }, {
1108 .type = EM28XX_VMUX_COMPOSITE1,
1109 .vmux = TVP5150_COMPOSITE1,
1110 .amux = EM28XX_AMUX_LINE_IN,
1111 .gpio = hauppauge_wintv_hvr_900_analog,
1112 }, {
1113 .type = EM28XX_VMUX_SVIDEO,
1114 .vmux = TVP5150_SVIDEO,
1115 .amux = EM28XX_AMUX_LINE_IN,
1116 .gpio = hauppauge_wintv_hvr_900_analog,
1117 } },
1118 },
1119 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1120 .name = "AMD ATI TV Wonder HD 600",
1121 .tuner_type = TUNER_XC2028,
1122 .tuner_gpio = default_tuner_gpio,
1123 .mts_firmware = 1,
1124 .has_dvb = 1,
1125 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1126 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1127 .decoder = EM28XX_TVP5150,
1128 .input = { {
1129 .type = EM28XX_VMUX_TELEVISION,
1130 .vmux = TVP5150_COMPOSITE0,
1131 .amux = EM28XX_AMUX_VIDEO,
1132 .gpio = hauppauge_wintv_hvr_900_analog,
1133 }, {
1134 .type = EM28XX_VMUX_COMPOSITE1,
1135 .vmux = TVP5150_COMPOSITE1,
1136 .amux = EM28XX_AMUX_LINE_IN,
1137 .gpio = hauppauge_wintv_hvr_900_analog,
1138 }, {
1139 .type = EM28XX_VMUX_SVIDEO,
1140 .vmux = TVP5150_SVIDEO,
1141 .amux = EM28XX_AMUX_LINE_IN,
1142 .gpio = hauppauge_wintv_hvr_900_analog,
1143 } },
1144 },
1145 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1146 .name = "Terratec Hybrid XS",
1147 .tuner_type = TUNER_XC2028,
1148 .tuner_gpio = default_tuner_gpio,
1149 .decoder = EM28XX_TVP5150,
1150 .has_dvb = 1,
1151 .dvb_gpio = default_digital,
1152 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1153 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1154 .input = { {
1155 .type = EM28XX_VMUX_TELEVISION,
1156 .vmux = TVP5150_COMPOSITE0,
1157 .amux = EM28XX_AMUX_VIDEO,
1158 .gpio = default_analog,
1159 }, {
1160 .type = EM28XX_VMUX_COMPOSITE1,
1161 .vmux = TVP5150_COMPOSITE1,
1162 .amux = EM28XX_AMUX_LINE_IN,
1163 .gpio = default_analog,
1164 }, {
1165 .type = EM28XX_VMUX_SVIDEO,
1166 .vmux = TVP5150_SVIDEO,
1167 .amux = EM28XX_AMUX_LINE_IN,
1168 .gpio = default_analog,
1169 } },
1170 },
1171 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1172 as Prodigy XS with a different PID, let's keep it separated for now
1173 maybe we'll need it lateron */
1174 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1175 .name = "Terratec Prodigy XS",
1176 .tuner_type = TUNER_XC2028,
1177 .tuner_gpio = default_tuner_gpio,
1178 .decoder = EM28XX_TVP5150,
1179 .input = { {
1180 .type = EM28XX_VMUX_TELEVISION,
1181 .vmux = TVP5150_COMPOSITE0,
1182 .amux = EM28XX_AMUX_VIDEO,
1183 .gpio = hauppauge_wintv_hvr_900_analog,
1184 }, {
1185 .type = EM28XX_VMUX_COMPOSITE1,
1186 .vmux = TVP5150_COMPOSITE1,
1187 .amux = EM28XX_AMUX_LINE_IN,
1188 .gpio = hauppauge_wintv_hvr_900_analog,
1189 }, {
1190 .type = EM28XX_VMUX_SVIDEO,
1191 .vmux = TVP5150_SVIDEO,
1192 .amux = EM28XX_AMUX_LINE_IN,
1193 .gpio = hauppauge_wintv_hvr_900_analog,
1194 } },
1195 },
1196 [EM2820_BOARD_MSI_VOX_USB_2] = {
1197 .name = "MSI VOX USB 2.0",
1198 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1199 .tda9887_conf = TDA9887_PRESENT |
1200 TDA9887_PORT1_ACTIVE |
1201 TDA9887_PORT2_ACTIVE,
1202 .max_range_640_480 = 1,
1203 .decoder = EM28XX_SAA711X,
1204 .input = { {
1205 .type = EM28XX_VMUX_TELEVISION,
1206 .vmux = SAA7115_COMPOSITE4,
1207 .amux = EM28XX_AMUX_VIDEO,
1208 }, {
1209 .type = EM28XX_VMUX_COMPOSITE1,
1210 .vmux = SAA7115_COMPOSITE0,
1211 .amux = EM28XX_AMUX_LINE_IN,
1212 }, {
1213 .type = EM28XX_VMUX_SVIDEO,
1214 .vmux = SAA7115_SVIDEO3,
1215 .amux = EM28XX_AMUX_LINE_IN,
1216 } },
1217 },
1218 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1219 .name = "Terratec Cinergy 200 USB",
1220 .is_em2800 = 1,
1221 .has_ir_i2c = 1,
1222 .tuner_type = TUNER_LG_TALN,
1223 .tda9887_conf = TDA9887_PRESENT,
1224 .decoder = EM28XX_SAA711X,
1225 .input = { {
1226 .type = EM28XX_VMUX_TELEVISION,
1227 .vmux = SAA7115_COMPOSITE2,
1228 .amux = EM28XX_AMUX_VIDEO,
1229 }, {
1230 .type = EM28XX_VMUX_COMPOSITE1,
1231 .vmux = SAA7115_COMPOSITE0,
1232 .amux = EM28XX_AMUX_LINE_IN,
1233 }, {
1234 .type = EM28XX_VMUX_SVIDEO,
1235 .vmux = SAA7115_SVIDEO3,
1236 .amux = EM28XX_AMUX_LINE_IN,
1237 } },
1238 },
1239 [EM2800_BOARD_GRABBEEX_USB2800] = {
1240 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1241 .is_em2800 = 1,
1242 .decoder = EM28XX_SAA711X,
1243 .tuner_type = TUNER_ABSENT, /* capture only board */
1244 .input = { {
1245 .type = EM28XX_VMUX_COMPOSITE1,
1246 .vmux = SAA7115_COMPOSITE0,
1247 .amux = EM28XX_AMUX_LINE_IN,
1248 }, {
1249 .type = EM28XX_VMUX_SVIDEO,
1250 .vmux = SAA7115_SVIDEO3,
1251 .amux = EM28XX_AMUX_LINE_IN,
1252 } },
1253 },
1254 [EM2800_BOARD_VC211A] = {
1255 .name = "Actionmaster/LinXcel/Digitus VC211A",
1256 .is_em2800 = 1,
1257 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1258 .decoder = EM28XX_SAA711X,
1259 .input = { {
1260 .type = EM28XX_VMUX_COMPOSITE1,
1261 .vmux = SAA7115_COMPOSITE0,
1262 .amux = EM28XX_AMUX_LINE_IN,
1263 .gpio = vc211a_enable,
1264 }, {
1265 .type = EM28XX_VMUX_SVIDEO,
1266 .vmux = SAA7115_SVIDEO3,
1267 .amux = EM28XX_AMUX_LINE_IN,
1268 .gpio = vc211a_enable,
1269 } },
1270 },
1271 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1272 .name = "Leadtek Winfast USB II",
1273 .is_em2800 = 1,
1274 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1275 .tda9887_conf = TDA9887_PRESENT,
1276 .decoder = EM28XX_SAA711X,
1277 .input = { {
1278 .type = EM28XX_VMUX_TELEVISION,
1279 .vmux = SAA7115_COMPOSITE2,
1280 .amux = EM28XX_AMUX_VIDEO,
1281 }, {
1282 .type = EM28XX_VMUX_COMPOSITE1,
1283 .vmux = SAA7115_COMPOSITE0,
1284 .amux = EM28XX_AMUX_LINE_IN,
1285 }, {
1286 .type = EM28XX_VMUX_SVIDEO,
1287 .vmux = SAA7115_SVIDEO3,
1288 .amux = EM28XX_AMUX_LINE_IN,
1289 } },
1290 },
1291 [EM2800_BOARD_KWORLD_USB2800] = {
1292 .name = "Kworld USB2800",
1293 .is_em2800 = 1,
1294 .tuner_type = TUNER_PHILIPS_FCV1236D,
1295 .tda9887_conf = TDA9887_PRESENT,
1296 .decoder = EM28XX_SAA711X,
1297 .input = { {
1298 .type = EM28XX_VMUX_TELEVISION,
1299 .vmux = SAA7115_COMPOSITE2,
1300 .amux = EM28XX_AMUX_VIDEO,
1301 }, {
1302 .type = EM28XX_VMUX_COMPOSITE1,
1303 .vmux = SAA7115_COMPOSITE0,
1304 .amux = EM28XX_AMUX_LINE_IN,
1305 }, {
1306 .type = EM28XX_VMUX_SVIDEO,
1307 .vmux = SAA7115_SVIDEO3,
1308 .amux = EM28XX_AMUX_LINE_IN,
1309 } },
1310 },
1311 [EM2820_BOARD_PINNACLE_DVC_90] = {
1312 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1313 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1314 .tuner_type = TUNER_ABSENT, /* capture only board */
1315 .decoder = EM28XX_SAA711X,
1316 .input = { {
1317 .type = EM28XX_VMUX_COMPOSITE1,
1318 .vmux = SAA7115_COMPOSITE0,
1319 .amux = EM28XX_AMUX_LINE_IN,
1320 }, {
1321 .type = EM28XX_VMUX_SVIDEO,
1322 .vmux = SAA7115_SVIDEO3,
1323 .amux = EM28XX_AMUX_LINE_IN,
1324 } },
1325 },
1326 [EM2800_BOARD_VGEAR_POCKETTV] = {
1327 .name = "V-Gear PocketTV",
1328 .is_em2800 = 1,
1329 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1330 .tda9887_conf = TDA9887_PRESENT,
1331 .decoder = EM28XX_SAA711X,
1332 .input = { {
1333 .type = EM28XX_VMUX_TELEVISION,
1334 .vmux = SAA7115_COMPOSITE2,
1335 .amux = EM28XX_AMUX_VIDEO,
1336 }, {
1337 .type = EM28XX_VMUX_COMPOSITE1,
1338 .vmux = SAA7115_COMPOSITE0,
1339 .amux = EM28XX_AMUX_LINE_IN,
1340 }, {
1341 .type = EM28XX_VMUX_SVIDEO,
1342 .vmux = SAA7115_SVIDEO3,
1343 .amux = EM28XX_AMUX_LINE_IN,
1344 } },
1345 },
1346 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1347 .name = "Pixelview PlayTV Box 4 USB 2.0",
1348 .tda9887_conf = TDA9887_PRESENT,
1349 .tuner_type = TUNER_YMEC_TVF_5533MF,
1350 .decoder = EM28XX_SAA711X,
1351 .input = { {
1352 .type = EM28XX_VMUX_TELEVISION,
1353 .vmux = SAA7115_COMPOSITE2,
1354 .amux = EM28XX_AMUX_VIDEO,
1355 .aout = EM28XX_AOUT_MONO | /* I2S */
1356 EM28XX_AOUT_MASTER, /* Line out pin */
1357 }, {
1358 .type = EM28XX_VMUX_COMPOSITE1,
1359 .vmux = SAA7115_COMPOSITE0,
1360 .amux = EM28XX_AMUX_LINE_IN,
1361 }, {
1362 .type = EM28XX_VMUX_SVIDEO,
1363 .vmux = SAA7115_SVIDEO3,
1364 .amux = EM28XX_AMUX_LINE_IN,
1365 } },
1366 },
1367 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1368 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1369 .has_snapshot_button = 1,
1370 .tda9887_conf = TDA9887_PRESENT,
1371 .tuner_type = TUNER_YMEC_TVF_5533MF,
1372 .decoder = EM28XX_SAA711X,
1373 .input = { {
1374 .type = EM28XX_VMUX_TELEVISION,
1375 .vmux = SAA7115_COMPOSITE2,
1376 .amux = EM28XX_AMUX_VIDEO,
1377 .aout = EM28XX_AOUT_MONO | /* I2S */
1378 EM28XX_AOUT_MASTER, /* Line out pin */
1379 }, {
1380 .type = EM28XX_VMUX_COMPOSITE1,
1381 .vmux = SAA7115_COMPOSITE0,
1382 .amux = EM28XX_AMUX_LINE_IN,
1383 }, {
1384 .type = EM28XX_VMUX_SVIDEO,
1385 .vmux = SAA7115_SVIDEO3,
1386 .amux = EM28XX_AMUX_LINE_IN,
1387 } },
1388 },
1389 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1390 .name = "EM2860/SAA711X Reference Design",
1391 .has_snapshot_button = 1,
1392 .tuner_type = TUNER_ABSENT,
1393 .decoder = EM28XX_SAA711X,
1394 .input = { {
1395 .type = EM28XX_VMUX_SVIDEO,
1396 .vmux = SAA7115_SVIDEO3,
1397 }, {
1398 .type = EM28XX_VMUX_COMPOSITE1,
1399 .vmux = SAA7115_COMPOSITE0,
1400 } },
1401 },
1402
1403 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1404 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1405 EM28XX_I2C_CLK_WAIT_ENABLE |
1406 EM28XX_I2C_FREQ_100_KHZ,
1407 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1408 .name = "EM2874 Leadership ISDBT",
1409 .tuner_type = TUNER_ABSENT,
1410 .tuner_gpio = leadership_reset,
1411 .dvb_gpio = leadership_digital,
1412 .has_dvb = 1,
1413 },
1414
1415 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1416 .name = "MSI DigiVox A/D",
1417 .valid = EM28XX_BOARD_NOT_VALIDATED,
1418 .tuner_type = TUNER_XC2028,
1419 .tuner_gpio = default_tuner_gpio,
1420 .decoder = EM28XX_TVP5150,
1421 .input = { {
1422 .type = EM28XX_VMUX_TELEVISION,
1423 .vmux = TVP5150_COMPOSITE0,
1424 .amux = EM28XX_AMUX_VIDEO,
1425 .gpio = em2880_msi_digivox_ad_analog,
1426 }, {
1427 .type = EM28XX_VMUX_COMPOSITE1,
1428 .vmux = TVP5150_COMPOSITE1,
1429 .amux = EM28XX_AMUX_LINE_IN,
1430 .gpio = em2880_msi_digivox_ad_analog,
1431 }, {
1432 .type = EM28XX_VMUX_SVIDEO,
1433 .vmux = TVP5150_SVIDEO,
1434 .amux = EM28XX_AMUX_LINE_IN,
1435 .gpio = em2880_msi_digivox_ad_analog,
1436 } },
1437 },
1438 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1439 .name = "MSI DigiVox A/D II",
1440 .valid = EM28XX_BOARD_NOT_VALIDATED,
1441 .tuner_type = TUNER_XC2028,
1442 .tuner_gpio = default_tuner_gpio,
1443 .decoder = EM28XX_TVP5150,
1444 .input = { {
1445 .type = EM28XX_VMUX_TELEVISION,
1446 .vmux = TVP5150_COMPOSITE0,
1447 .amux = EM28XX_AMUX_VIDEO,
1448 .gpio = em2880_msi_digivox_ad_analog,
1449 }, {
1450 .type = EM28XX_VMUX_COMPOSITE1,
1451 .vmux = TVP5150_COMPOSITE1,
1452 .amux = EM28XX_AMUX_LINE_IN,
1453 .gpio = em2880_msi_digivox_ad_analog,
1454 }, {
1455 .type = EM28XX_VMUX_SVIDEO,
1456 .vmux = TVP5150_SVIDEO,
1457 .amux = EM28XX_AMUX_LINE_IN,
1458 .gpio = em2880_msi_digivox_ad_analog,
1459 } },
1460 },
1461 [EM2880_BOARD_KWORLD_DVB_305U] = {
1462 .name = "KWorld DVB-T 305U",
1463 .tuner_type = TUNER_XC2028,
1464 .tuner_gpio = default_tuner_gpio,
1465 .decoder = EM28XX_TVP5150,
1466 .input = { {
1467 .type = EM28XX_VMUX_TELEVISION,
1468 .vmux = TVP5150_COMPOSITE0,
1469 .amux = EM28XX_AMUX_VIDEO,
1470 }, {
1471 .type = EM28XX_VMUX_COMPOSITE1,
1472 .vmux = TVP5150_COMPOSITE1,
1473 .amux = EM28XX_AMUX_LINE_IN,
1474 }, {
1475 .type = EM28XX_VMUX_SVIDEO,
1476 .vmux = TVP5150_SVIDEO,
1477 .amux = EM28XX_AMUX_LINE_IN,
1478 } },
1479 },
1480 [EM2880_BOARD_KWORLD_DVB_310U] = {
1481 .name = "KWorld DVB-T 310U",
1482 .tuner_type = TUNER_XC2028,
1483 .tuner_gpio = default_tuner_gpio,
1484 .has_dvb = 1,
1485 .dvb_gpio = default_digital,
1486 .mts_firmware = 1,
1487 .decoder = EM28XX_TVP5150,
1488 .input = { {
1489 .type = EM28XX_VMUX_TELEVISION,
1490 .vmux = TVP5150_COMPOSITE0,
1491 .amux = EM28XX_AMUX_VIDEO,
1492 .gpio = default_analog,
1493 }, {
1494 .type = EM28XX_VMUX_COMPOSITE1,
1495 .vmux = TVP5150_COMPOSITE1,
1496 .amux = EM28XX_AMUX_LINE_IN,
1497 .gpio = default_analog,
1498 }, { /* S-video has not been tested yet */
1499 .type = EM28XX_VMUX_SVIDEO,
1500 .vmux = TVP5150_SVIDEO,
1501 .amux = EM28XX_AMUX_LINE_IN,
1502 .gpio = default_analog,
1503 } },
1504 },
1505 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1506 .name = "KWorld ATSC 315U HDTV TV Box",
1507 .valid = EM28XX_BOARD_NOT_VALIDATED,
1508 .tuner_type = TUNER_THOMSON_DTT761X,
1509 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1510 .tda9887_conf = TDA9887_PRESENT,
1511 .decoder = EM28XX_SAA711X,
1512 .has_dvb = 1,
1513 .dvb_gpio = em2882_kworld_315u_digital,
1514 .ir_codes = RC_MAP_KWORLD_315U,
1515 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1516 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1517 /* Analog mode - still not ready */
1518 /*.input = { {
1519 .type = EM28XX_VMUX_TELEVISION,
1520 .vmux = SAA7115_COMPOSITE2,
1521 .amux = EM28XX_AMUX_VIDEO,
1522 .gpio = em2882_kworld_315u_analog,
1523 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1524 }, {
1525 .type = EM28XX_VMUX_COMPOSITE1,
1526 .vmux = SAA7115_COMPOSITE0,
1527 .amux = EM28XX_AMUX_LINE_IN,
1528 .gpio = em2882_kworld_315u_analog1,
1529 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1530 }, {
1531 .type = EM28XX_VMUX_SVIDEO,
1532 .vmux = SAA7115_SVIDEO3,
1533 .amux = EM28XX_AMUX_LINE_IN,
1534 .gpio = em2882_kworld_315u_analog1,
1535 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1536 } }, */
1537 },
1538 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1539 .name = "Empire dual TV",
1540 .tuner_type = TUNER_XC2028,
1541 .tuner_gpio = default_tuner_gpio,
1542 .has_dvb = 1,
1543 .dvb_gpio = default_digital,
1544 .mts_firmware = 1,
1545 .decoder = EM28XX_TVP5150,
1546 .input = { {
1547 .type = EM28XX_VMUX_TELEVISION,
1548 .vmux = TVP5150_COMPOSITE0,
1549 .amux = EM28XX_AMUX_VIDEO,
1550 .gpio = default_analog,
1551 }, {
1552 .type = EM28XX_VMUX_COMPOSITE1,
1553 .vmux = TVP5150_COMPOSITE1,
1554 .amux = EM28XX_AMUX_LINE_IN,
1555 .gpio = default_analog,
1556 }, {
1557 .type = EM28XX_VMUX_SVIDEO,
1558 .vmux = TVP5150_SVIDEO,
1559 .amux = EM28XX_AMUX_LINE_IN,
1560 .gpio = default_analog,
1561 } },
1562 },
1563 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1564 .name = "DNT DA2 Hybrid",
1565 .valid = EM28XX_BOARD_NOT_VALIDATED,
1566 .tuner_type = TUNER_XC2028,
1567 .tuner_gpio = default_tuner_gpio,
1568 .decoder = EM28XX_TVP5150,
1569 .input = { {
1570 .type = EM28XX_VMUX_TELEVISION,
1571 .vmux = TVP5150_COMPOSITE0,
1572 .amux = EM28XX_AMUX_VIDEO,
1573 .gpio = default_analog,
1574 }, {
1575 .type = EM28XX_VMUX_COMPOSITE1,
1576 .vmux = TVP5150_COMPOSITE1,
1577 .amux = EM28XX_AMUX_LINE_IN,
1578 .gpio = default_analog,
1579 }, {
1580 .type = EM28XX_VMUX_SVIDEO,
1581 .vmux = TVP5150_SVIDEO,
1582 .amux = EM28XX_AMUX_LINE_IN,
1583 .gpio = default_analog,
1584 } },
1585 },
1586 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1587 .name = "Pinnacle Hybrid Pro",
1588 .tuner_type = TUNER_XC2028,
1589 .tuner_gpio = default_tuner_gpio,
1590 .decoder = EM28XX_TVP5150,
1591 .has_dvb = 1,
1592 .dvb_gpio = pinnacle_hybrid_pro_digital,
1593 .input = { {
1594 .type = EM28XX_VMUX_TELEVISION,
1595 .vmux = TVP5150_COMPOSITE0,
1596 .amux = EM28XX_AMUX_VIDEO,
1597 .gpio = pinnacle_hybrid_pro_analog,
1598 }, {
1599 .type = EM28XX_VMUX_COMPOSITE1,
1600 .vmux = TVP5150_COMPOSITE1,
1601 .amux = EM28XX_AMUX_LINE_IN,
1602 .gpio = pinnacle_hybrid_pro_analog,
1603 }, {
1604 .type = EM28XX_VMUX_SVIDEO,
1605 .vmux = TVP5150_SVIDEO,
1606 .amux = EM28XX_AMUX_LINE_IN,
1607 .gpio = pinnacle_hybrid_pro_analog,
1608 } },
1609 },
1610 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1611 .name = "Pinnacle Hybrid Pro (330e)",
1612 .tuner_type = TUNER_XC2028,
1613 .tuner_gpio = default_tuner_gpio,
1614 .mts_firmware = 1,
1615 .has_dvb = 1,
1616 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1617 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1618 .decoder = EM28XX_TVP5150,
1619 .input = { {
1620 .type = EM28XX_VMUX_TELEVISION,
1621 .vmux = TVP5150_COMPOSITE0,
1622 .amux = EM28XX_AMUX_VIDEO,
1623 .gpio = hauppauge_wintv_hvr_900_analog,
1624 }, {
1625 .type = EM28XX_VMUX_COMPOSITE1,
1626 .vmux = TVP5150_COMPOSITE1,
1627 .amux = EM28XX_AMUX_LINE_IN,
1628 .gpio = hauppauge_wintv_hvr_900_analog,
1629 }, {
1630 .type = EM28XX_VMUX_SVIDEO,
1631 .vmux = TVP5150_SVIDEO,
1632 .amux = EM28XX_AMUX_LINE_IN,
1633 .gpio = hauppauge_wintv_hvr_900_analog,
1634 } },
1635 },
1636 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1637 .name = "Kworld VS-DVB-T 323UR",
1638 .tuner_type = TUNER_XC2028,
1639 .tuner_gpio = default_tuner_gpio,
1640 .decoder = EM28XX_TVP5150,
1641 .mts_firmware = 1,
1642 .has_dvb = 1,
1643 .dvb_gpio = kworld_330u_digital,
1644 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1645 .ir_codes = RC_MAP_KWORLD_315U,
1646 .input = { {
1647 .type = EM28XX_VMUX_TELEVISION,
1648 .vmux = TVP5150_COMPOSITE0,
1649 .amux = EM28XX_AMUX_VIDEO,
1650 }, {
1651 .type = EM28XX_VMUX_COMPOSITE1,
1652 .vmux = TVP5150_COMPOSITE1,
1653 .amux = EM28XX_AMUX_LINE_IN,
1654 }, {
1655 .type = EM28XX_VMUX_SVIDEO,
1656 .vmux = TVP5150_SVIDEO,
1657 .amux = EM28XX_AMUX_LINE_IN,
1658 } },
1659 },
1660 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1661 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1662 .tuner_type = TUNER_XC2028,
1663 .tuner_gpio = default_tuner_gpio,
1664 .mts_firmware = 1,
1665 .decoder = EM28XX_TVP5150,
1666 .has_dvb = 1,
1667 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1668 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1669 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1670 .input = { {
1671 .type = EM28XX_VMUX_TELEVISION,
1672 .vmux = TVP5150_COMPOSITE0,
1673 .amux = EM28XX_AMUX_VIDEO,
1674 .gpio = hauppauge_wintv_hvr_900_analog,
1675 }, {
1676 .type = EM28XX_VMUX_COMPOSITE1,
1677 .vmux = TVP5150_COMPOSITE1,
1678 .amux = EM28XX_AMUX_LINE_IN,
1679 .gpio = hauppauge_wintv_hvr_900_analog,
1680 }, {
1681 .type = EM28XX_VMUX_SVIDEO,
1682 .vmux = TVP5150_SVIDEO,
1683 .amux = EM28XX_AMUX_LINE_IN,
1684 .gpio = hauppauge_wintv_hvr_900_analog,
1685 } },
1686 },
1687 [EM2882_BOARD_DIKOM_DK300] = {
1688 .name = "Dikom DK300",
1689 .tuner_type = TUNER_XC2028,
1690 .tuner_gpio = default_tuner_gpio,
1691 .decoder = EM28XX_TVP5150,
1692 .mts_firmware = 1,
1693 .has_dvb = 1,
1694 .dvb_gpio = dikom_dk300_digital,
1695 .input = { {
1696 .type = EM28XX_VMUX_TELEVISION,
1697 .vmux = TVP5150_COMPOSITE0,
1698 .amux = EM28XX_AMUX_VIDEO,
1699 .gpio = default_analog,
1700 } },
1701 },
1702 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1703 .name = "Kworld PlusTV HD Hybrid 330",
1704 .tuner_type = TUNER_XC2028,
1705 .tuner_gpio = default_tuner_gpio,
1706 .decoder = EM28XX_TVP5150,
1707 .mts_firmware = 1,
1708 .has_dvb = 1,
1709 .dvb_gpio = kworld_330u_digital,
1710 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1711 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1712 EM28XX_I2C_EEPROM_ON_BOARD |
1713 EM28XX_I2C_EEPROM_KEY_VALID,
1714 .input = { {
1715 .type = EM28XX_VMUX_TELEVISION,
1716 .vmux = TVP5150_COMPOSITE0,
1717 .amux = EM28XX_AMUX_VIDEO,
1718 .gpio = kworld_330u_analog,
1719 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1720 }, {
1721 .type = EM28XX_VMUX_COMPOSITE1,
1722 .vmux = TVP5150_COMPOSITE1,
1723 .amux = EM28XX_AMUX_LINE_IN,
1724 .gpio = kworld_330u_analog,
1725 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1726 }, {
1727 .type = EM28XX_VMUX_SVIDEO,
1728 .vmux = TVP5150_SVIDEO,
1729 .amux = EM28XX_AMUX_LINE_IN,
1730 .gpio = kworld_330u_analog,
1731 } },
1732 },
1733 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1734 .name = "Compro VideoMate ForYou/Stereo",
1735 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1736 .tvaudio_addr = 0xb0,
1737 .tda9887_conf = TDA9887_PRESENT,
1738 .decoder = EM28XX_TVP5150,
1739 .adecoder = EM28XX_TVAUDIO,
1740 .mute_gpio = compro_mute_gpio,
1741 .input = { {
1742 .type = EM28XX_VMUX_TELEVISION,
1743 .vmux = TVP5150_COMPOSITE0,
1744 .amux = EM28XX_AMUX_VIDEO,
1745 .gpio = compro_unmute_tv_gpio,
1746 }, {
1747 .type = EM28XX_VMUX_SVIDEO,
1748 .vmux = TVP5150_SVIDEO,
1749 .amux = EM28XX_AMUX_LINE_IN,
1750 .gpio = compro_unmute_svid_gpio,
1751 } },
1752 },
1753 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1754 .name = "Kaiomy TVnPC U2",
1755 .vchannels = 3,
1756 .tuner_type = TUNER_XC2028,
1757 .tuner_addr = 0x61,
1758 .mts_firmware = 1,
1759 .decoder = EM28XX_TVP5150,
1760 .tuner_gpio = default_tuner_gpio,
1761 .ir_codes = RC_MAP_KAIOMY,
1762 .input = { {
1763 .type = EM28XX_VMUX_TELEVISION,
1764 .vmux = TVP5150_COMPOSITE0,
1765 .amux = EM28XX_AMUX_VIDEO,
1766
1767 }, {
1768 .type = EM28XX_VMUX_COMPOSITE1,
1769 .vmux = TVP5150_COMPOSITE1,
1770 .amux = EM28XX_AMUX_LINE_IN,
1771 }, {
1772 .type = EM28XX_VMUX_SVIDEO,
1773 .vmux = TVP5150_SVIDEO,
1774 .amux = EM28XX_AMUX_LINE_IN,
1775 } },
1776 .radio = {
1777 .type = EM28XX_RADIO,
1778 .amux = EM28XX_AMUX_LINE_IN,
1779 }
1780 },
1781 [EM2860_BOARD_EASYCAP] = {
1782 .name = "Easy Cap Capture DC-60",
1783 .vchannels = 2,
1784 .tuner_type = TUNER_ABSENT,
1785 .decoder = EM28XX_SAA711X,
1786 .input = { {
1787 .type = EM28XX_VMUX_COMPOSITE1,
1788 .vmux = SAA7115_COMPOSITE0,
1789 .amux = EM28XX_AMUX_LINE_IN,
1790 }, {
1791 .type = EM28XX_VMUX_SVIDEO,
1792 .vmux = SAA7115_SVIDEO3,
1793 .amux = EM28XX_AMUX_LINE_IN,
1794 } },
1795 },
1796 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1797 .name = "IO-DATA GV-MVP/SZ",
1798 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1799 .tuner_gpio = default_tuner_gpio,
1800 .tda9887_conf = TDA9887_PRESENT,
1801 .decoder = EM28XX_TVP5150,
1802 .input = { {
1803 .type = EM28XX_VMUX_TELEVISION,
1804 .vmux = TVP5150_COMPOSITE0,
1805 .amux = EM28XX_AMUX_VIDEO,
1806 }, { /* Composite has not been tested yet */
1807 .type = EM28XX_VMUX_COMPOSITE1,
1808 .vmux = TVP5150_COMPOSITE1,
1809 .amux = EM28XX_AMUX_VIDEO,
1810 }, { /* S-video has not been tested yet */
1811 .type = EM28XX_VMUX_SVIDEO,
1812 .vmux = TVP5150_SVIDEO,
1813 .amux = EM28XX_AMUX_VIDEO,
1814 } },
1815 },
1816 [EM2860_BOARD_TERRATEC_GRABBY] = {
1817 .name = "Terratec Grabby",
1818 .vchannels = 2,
1819 .tuner_type = TUNER_ABSENT,
1820 .decoder = EM28XX_SAA711X,
1821 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1822 .input = { {
1823 .type = EM28XX_VMUX_COMPOSITE1,
1824 .vmux = SAA7115_COMPOSITE0,
1825 .amux = EM28XX_AMUX_LINE_IN,
1826 }, {
1827 .type = EM28XX_VMUX_SVIDEO,
1828 .vmux = SAA7115_SVIDEO3,
1829 .amux = EM28XX_AMUX_LINE_IN,
1830 } },
1831 },
1832 [EM2860_BOARD_TERRATEC_AV350] = {
1833 .name = "Terratec AV350",
1834 .vchannels = 2,
1835 .tuner_type = TUNER_ABSENT,
1836 .decoder = EM28XX_TVP5150,
1837 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1838 .mute_gpio = terratec_av350_mute_gpio,
1839 .input = { {
1840 .type = EM28XX_VMUX_COMPOSITE1,
1841 .vmux = TVP5150_COMPOSITE1,
1842 .amux = EM28XX_AUDIO_SRC_LINE,
1843 .gpio = terratec_av350_unmute_gpio,
1844
1845 }, {
1846 .type = EM28XX_VMUX_SVIDEO,
1847 .vmux = TVP5150_SVIDEO,
1848 .amux = EM28XX_AUDIO_SRC_LINE,
1849 .gpio = terratec_av350_unmute_gpio,
1850 } },
1851 },
1852
1853 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1854 .name = "Elgato Video Capture",
1855 .decoder = EM28XX_SAA711X,
1856 .tuner_type = TUNER_ABSENT, /* Capture only device */
1857 .input = { {
1858 .type = EM28XX_VMUX_COMPOSITE1,
1859 .vmux = SAA7115_COMPOSITE0,
1860 .amux = EM28XX_AMUX_LINE_IN,
1861 }, {
1862 .type = EM28XX_VMUX_SVIDEO,
1863 .vmux = SAA7115_SVIDEO3,
1864 .amux = EM28XX_AMUX_LINE_IN,
1865 } },
1866 },
1867
1868 [EM2882_BOARD_EVGA_INDTUBE] = {
1869 .name = "Evga inDtube",
1870 .tuner_type = TUNER_XC2028,
1871 .tuner_gpio = default_tuner_gpio,
1872 .decoder = EM28XX_TVP5150,
1873 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1874 .mts_firmware = 1,
1875 .has_dvb = 1,
1876 .dvb_gpio = evga_indtube_digital,
1877 .ir_codes = RC_MAP_EVGA_INDTUBE,
1878 .input = { {
1879 .type = EM28XX_VMUX_TELEVISION,
1880 .vmux = TVP5150_COMPOSITE0,
1881 .amux = EM28XX_AMUX_VIDEO,
1882 .gpio = evga_indtube_analog,
1883 }, {
1884 .type = EM28XX_VMUX_COMPOSITE1,
1885 .vmux = TVP5150_COMPOSITE1,
1886 .amux = EM28XX_AMUX_LINE_IN,
1887 .gpio = evga_indtube_analog,
1888 }, {
1889 .type = EM28XX_VMUX_SVIDEO,
1890 .vmux = TVP5150_SVIDEO,
1891 .amux = EM28XX_AMUX_LINE_IN,
1892 .gpio = evga_indtube_analog,
1893 } },
1894 },
1895 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1896 Infineon TUA6034) */
1897 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1898 .name = "Reddo DVB-C USB TV Box",
1899 .tuner_type = TUNER_ABSENT,
1900 .tuner_gpio = reddo_dvb_c_usb_box,
1901 .has_dvb = 1,
1902 },
1903 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1904 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1905 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1906 [EM2870_BOARD_KWORLD_A340] = {
1907 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1908 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1909 .has_dvb = 1,
1910 .dvb_gpio = kworld_a340_digital,
1911 .tuner_gpio = default_tuner_gpio,
1912 },
1913 /* 2013:024f PCTV nanoStick T2 290e.
1914 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1915 [EM28174_BOARD_PCTV_290E] = {
1916 .name = "PCTV nanoStick T2 290e",
1917 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1918 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1919 .tuner_type = TUNER_ABSENT,
1920 .tuner_gpio = pctv_290e,
1921 .has_dvb = 1,
1922 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1923 },
1924 /* 2013:024f PCTV DVB-S2 Stick 460e
1925 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1926 [EM28174_BOARD_PCTV_460E] = {
1927 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1928 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1929 .name = "PCTV DVB-S2 Stick (460e)",
1930 .tuner_type = TUNER_ABSENT,
1931 .tuner_gpio = pctv_460e,
1932 .has_dvb = 1,
1933 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1934 },
1935 /* eb1a:5006 Honestech VIDBOX NW03
1936 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1937 [EM2860_BOARD_HT_VIDBOX_NW03] = {
1938 .name = "Honestech Vidbox NW03",
1939 .tuner_type = TUNER_ABSENT,
1940 .decoder = EM28XX_SAA711X,
1941 .input = { {
1942 .type = EM28XX_VMUX_COMPOSITE1,
1943 .vmux = SAA7115_COMPOSITE0,
1944 .amux = EM28XX_AMUX_LINE_IN,
1945 }, {
1946 .type = EM28XX_VMUX_SVIDEO,
1947 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
1948 .amux = EM28XX_AMUX_LINE_IN,
1949 } },
1950 },
1951 /* 1b80:e425 MaxMedia UB425-TC
1952 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
1953 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
1954 .name = "MaxMedia UB425-TC",
1955 .tuner_type = TUNER_ABSENT,
1956 .tuner_gpio = maxmedia_ub425_tc,
1957 .has_dvb = 1,
1958 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1959 EM28XX_I2C_CLK_WAIT_ENABLE |
1960 EM28XX_I2C_FREQ_400_KHZ,
1961 },
1962 /* 2304:0242 PCTV QuatroStick (510e)
1963 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1964 [EM2884_BOARD_PCTV_510E] = {
1965 .name = "PCTV QuatroStick (510e)",
1966 .tuner_type = TUNER_ABSENT,
1967 .tuner_gpio = pctv_510e,
1968 .has_dvb = 1,
1969 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1970 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1971 EM28XX_I2C_CLK_WAIT_ENABLE |
1972 EM28XX_I2C_FREQ_400_KHZ,
1973 },
1974 /* 2013:0251 PCTV QuatroStick nano (520e)
1975 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1976 [EM2884_BOARD_PCTV_520E] = {
1977 .name = "PCTV QuatroStick nano (520e)",
1978 .tuner_type = TUNER_ABSENT,
1979 .tuner_gpio = pctv_520e,
1980 .has_dvb = 1,
1981 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1982 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1983 EM28XX_I2C_CLK_WAIT_ENABLE |
1984 EM28XX_I2C_FREQ_400_KHZ,
1985 },
1986 };
1987 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1988
1989 /* table of devices that work with this driver */
1990 struct usb_device_id em28xx_id_table[] = {
1991 { USB_DEVICE(0xeb1a, 0x2750),
1992 .driver_info = EM2750_BOARD_UNKNOWN },
1993 { USB_DEVICE(0xeb1a, 0x2751),
1994 .driver_info = EM2750_BOARD_UNKNOWN },
1995 { USB_DEVICE(0xeb1a, 0x2800),
1996 .driver_info = EM2800_BOARD_UNKNOWN },
1997 { USB_DEVICE(0xeb1a, 0x2710),
1998 .driver_info = EM2820_BOARD_UNKNOWN },
1999 { USB_DEVICE(0xeb1a, 0x2820),
2000 .driver_info = EM2820_BOARD_UNKNOWN },
2001 { USB_DEVICE(0xeb1a, 0x2821),
2002 .driver_info = EM2820_BOARD_UNKNOWN },
2003 { USB_DEVICE(0xeb1a, 0x2860),
2004 .driver_info = EM2820_BOARD_UNKNOWN },
2005 { USB_DEVICE(0xeb1a, 0x2861),
2006 .driver_info = EM2820_BOARD_UNKNOWN },
2007 { USB_DEVICE(0xeb1a, 0x2862),
2008 .driver_info = EM2820_BOARD_UNKNOWN },
2009 { USB_DEVICE(0xeb1a, 0x2863),
2010 .driver_info = EM2820_BOARD_UNKNOWN },
2011 { USB_DEVICE(0xeb1a, 0x2870),
2012 .driver_info = EM2820_BOARD_UNKNOWN },
2013 { USB_DEVICE(0xeb1a, 0x2881),
2014 .driver_info = EM2820_BOARD_UNKNOWN },
2015 { USB_DEVICE(0xeb1a, 0x2883),
2016 .driver_info = EM2820_BOARD_UNKNOWN },
2017 { USB_DEVICE(0xeb1a, 0x2868),
2018 .driver_info = EM2820_BOARD_UNKNOWN },
2019 { USB_DEVICE(0xeb1a, 0x2875),
2020 .driver_info = EM2820_BOARD_UNKNOWN },
2021 { USB_DEVICE(0xeb1a, 0xe300),
2022 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2023 { USB_DEVICE(0xeb1a, 0xe303),
2024 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2025 { USB_DEVICE(0xeb1a, 0xe305),
2026 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2027 { USB_DEVICE(0xeb1a, 0xe310),
2028 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2029 { USB_DEVICE(0xeb1a, 0xa313),
2030 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2031 { USB_DEVICE(0xeb1a, 0xa316),
2032 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2033 { USB_DEVICE(0xeb1a, 0xe320),
2034 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2035 { USB_DEVICE(0xeb1a, 0xe323),
2036 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2037 { USB_DEVICE(0xeb1a, 0xe350),
2038 .driver_info = EM2870_BOARD_KWORLD_350U },
2039 { USB_DEVICE(0xeb1a, 0xe355),
2040 .driver_info = EM2870_BOARD_KWORLD_355U },
2041 { USB_DEVICE(0xeb1a, 0x2801),
2042 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2043 { USB_DEVICE(0xeb1a, 0xe357),
2044 .driver_info = EM2870_BOARD_KWORLD_355U },
2045 { USB_DEVICE(0xeb1a, 0xe359),
2046 .driver_info = EM2870_BOARD_KWORLD_355U },
2047 { USB_DEVICE(0x1b80, 0xe302),
2048 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2049 { USB_DEVICE(0x1b80, 0xe304),
2050 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2051 { USB_DEVICE(0x0ccd, 0x0036),
2052 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2053 { USB_DEVICE(0x0ccd, 0x004c),
2054 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2055 { USB_DEVICE(0x0ccd, 0x004f),
2056 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2057 { USB_DEVICE(0x0ccd, 0x005e),
2058 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2059 { USB_DEVICE(0x0ccd, 0x0042),
2060 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2061 { USB_DEVICE(0x0ccd, 0x0043),
2062 .driver_info = EM2870_BOARD_TERRATEC_XS },
2063 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2064 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2065 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2066 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2067 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2068 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2069 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2070 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2071 { USB_DEVICE(0x0ccd, 0x0084),
2072 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2073 { USB_DEVICE(0x0ccd, 0x0096),
2074 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2075 { USB_DEVICE(0x0ccd, 0x10AF),
2076 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2077 { USB_DEVICE(0x0ccd, 0x00b2),
2078 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2079 { USB_DEVICE(0x0fd9, 0x0033),
2080 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2081 { USB_DEVICE(0x185b, 0x2870),
2082 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2083 { USB_DEVICE(0x185b, 0x2041),
2084 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2085 { USB_DEVICE(0x2040, 0x4200),
2086 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2087 { USB_DEVICE(0x2040, 0x4201),
2088 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2089 { USB_DEVICE(0x2040, 0x6500),
2090 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2091 { USB_DEVICE(0x2040, 0x6502),
2092 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2093 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2094 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2095 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2096 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2097 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2098 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2099 { USB_DEVICE(0x2040, 0x651f),
2100 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2101 { USB_DEVICE(0x0438, 0xb002),
2102 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2103 { USB_DEVICE(0x2001, 0xf112),
2104 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2105 { USB_DEVICE(0x2304, 0x0207),
2106 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2107 { USB_DEVICE(0x2304, 0x0208),
2108 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2109 { USB_DEVICE(0x2304, 0x021a),
2110 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2111 { USB_DEVICE(0x2304, 0x0226),
2112 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2113 { USB_DEVICE(0x2304, 0x0227),
2114 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2115 { USB_DEVICE(0x0413, 0x6023),
2116 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2117 { USB_DEVICE(0x093b, 0xa003),
2118 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2119 { USB_DEVICE(0x093b, 0xa005),
2120 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2121 { USB_DEVICE(0x04bb, 0x0515),
2122 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2123 { USB_DEVICE(0xeb1a, 0x50a6),
2124 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2125 { USB_DEVICE(0x1b80, 0xa340),
2126 .driver_info = EM2870_BOARD_KWORLD_A340 },
2127 { USB_DEVICE(0x2013, 0x024f),
2128 .driver_info = EM28174_BOARD_PCTV_290E },
2129 { USB_DEVICE(0x2013, 0x024c),
2130 .driver_info = EM28174_BOARD_PCTV_460E },
2131 { USB_DEVICE(0x2040, 0x1605),
2132 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2133 { USB_DEVICE(0xeb1a, 0x5006),
2134 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2135 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2136 .driver_info = EM2860_BOARD_EASYCAP },
2137 { USB_DEVICE(0x1b80, 0xe425),
2138 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2139 { USB_DEVICE(0x2304, 0x0242),
2140 .driver_info = EM2884_BOARD_PCTV_510E },
2141 { USB_DEVICE(0x2013, 0x0251),
2142 .driver_info = EM2884_BOARD_PCTV_520E },
2143 { },
2144 };
2145 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2146
2147 /*
2148 * EEPROM hash table for devices with generic USB IDs
2149 */
2150 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2151 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2152 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2153 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2154 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2155 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2156 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2157 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2158 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2159 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2160 };
2161
2162 /* I2C devicelist hash table for devices with generic USB IDs */
2163 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2164 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2165 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2166 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2167 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2168 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2169 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2170 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2171 };
2172
2173 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2174 static unsigned short saa711x_addrs[] = {
2175 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
2176 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
2177 I2C_CLIENT_END };
2178
2179 static unsigned short tvp5150_addrs[] = {
2180 0xb8 >> 1,
2181 0xba >> 1,
2182 I2C_CLIENT_END
2183 };
2184
2185 static unsigned short msp3400_addrs[] = {
2186 0x80 >> 1,
2187 0x88 >> 1,
2188 I2C_CLIENT_END
2189 };
2190
2191 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2192 {
2193 int rc = 0;
2194 struct em28xx *dev = ptr;
2195
2196 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2197 return 0;
2198
2199 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2200 return 0;
2201
2202 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2203
2204 return rc;
2205 }
2206 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2207
2208 static inline void em28xx_set_model(struct em28xx *dev)
2209 {
2210 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2211
2212 /* Those are the default values for the majority of boards
2213 Use those values if not specified otherwise at boards entry
2214 */
2215 if (!dev->board.xclk)
2216 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2217 EM28XX_XCLK_FREQUENCY_12MHZ;
2218
2219 if (!dev->board.i2c_speed)
2220 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2221 EM28XX_I2C_FREQ_100_KHZ;
2222 }
2223
2224
2225 /* FIXME: Should be replaced by a proper mt9m111 driver */
2226 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2227 {
2228 int i;
2229 unsigned char regs[][3] = {
2230 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
2231 { 0x0d, 0x00, 0x00, },
2232 { 0x0a, 0x00, 0x21, },
2233 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
2234 };
2235
2236 for (i = 0; i < ARRAY_SIZE(regs); i++)
2237 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2238
2239 return 0;
2240 }
2241
2242
2243 /* FIXME: Should be replaced by a proper mt9m001 driver */
2244 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2245 {
2246 int i;
2247 unsigned char regs[][3] = {
2248 { 0x0d, 0x00, 0x01, },
2249 { 0x0d, 0x00, 0x00, },
2250 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
2251 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
2252 { 0x20, 0x11, 0x00, },
2253 { 0x06, 0x00, 0x10, },
2254 { 0x2b, 0x00, 0x24, },
2255 { 0x2e, 0x00, 0x24, },
2256 { 0x35, 0x00, 0x24, },
2257 { 0x2d, 0x00, 0x20, },
2258 { 0x2c, 0x00, 0x20, },
2259 { 0x09, 0x0a, 0xd4, },
2260 { 0x35, 0x00, 0x57, },
2261 };
2262
2263 for (i = 0; i < ARRAY_SIZE(regs); i++)
2264 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2265
2266 return 0;
2267 }
2268
2269 /* HINT method: webcam I2C chips
2270 *
2271 * This method works for webcams with Micron sensors
2272 */
2273 static int em28xx_hint_sensor(struct em28xx *dev)
2274 {
2275 int rc;
2276 char *sensor_name;
2277 unsigned char cmd;
2278 __be16 version_be;
2279 u16 version;
2280
2281 /* Micron sensor detection */
2282 dev->i2c_client.addr = 0xba >> 1;
2283 cmd = 0;
2284 i2c_master_send(&dev->i2c_client, &cmd, 1);
2285 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2286 if (rc != 2)
2287 return -EINVAL;
2288
2289 version = be16_to_cpu(version_be);
2290 switch (version) {
2291 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2292 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2293 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2294 em28xx_set_model(dev);
2295
2296 sensor_name = "mt9v011";
2297 dev->em28xx_sensor = EM28XX_MT9V011;
2298 dev->sensor_xres = 640;
2299 dev->sensor_yres = 480;
2300 /*
2301 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2302 * the Silvercrest cam I have here for testing - for higher
2303 * resolutions, a high clock cause horizontal artifacts, so we
2304 * need to use a lower xclk frequency.
2305 * Yet, it would be possible to adjust xclk depending on the
2306 * desired resolution, since this affects directly the
2307 * frame rate.
2308 */
2309 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2310 dev->sensor_xtal = 4300000;
2311
2312 /* probably means GRGB 16 bit bayer */
2313 dev->vinmode = 0x0d;
2314 dev->vinctl = 0x00;
2315
2316 break;
2317
2318 case 0x143a: /* MT9M111 as found in the ECS G200 */
2319 dev->model = EM2750_BOARD_UNKNOWN;
2320 em28xx_set_model(dev);
2321
2322 sensor_name = "mt9m111";
2323 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2324 dev->em28xx_sensor = EM28XX_MT9M111;
2325 em28xx_initialize_mt9m111(dev);
2326 dev->sensor_xres = 640;
2327 dev->sensor_yres = 512;
2328
2329 dev->vinmode = 0x0a;
2330 dev->vinctl = 0x00;
2331
2332 break;
2333
2334 case 0x8431:
2335 dev->model = EM2750_BOARD_UNKNOWN;
2336 em28xx_set_model(dev);
2337
2338 sensor_name = "mt9m001";
2339 dev->em28xx_sensor = EM28XX_MT9M001;
2340 em28xx_initialize_mt9m001(dev);
2341 dev->sensor_xres = 1280;
2342 dev->sensor_yres = 1024;
2343
2344 /* probably means BGGR 16 bit bayer */
2345 dev->vinmode = 0x0c;
2346 dev->vinctl = 0x00;
2347
2348 break;
2349 default:
2350 printk("Unknown Micron Sensor 0x%04x\n", version);
2351 return -EINVAL;
2352 }
2353
2354 /* Setup webcam defaults */
2355 em28xx_pre_card_setup(dev);
2356
2357 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2358 sensor_name, em28xx_boards[dev->model].name);
2359
2360 return 0;
2361 }
2362
2363 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2364 * this won't work for boards with generic PCI IDs
2365 */
2366 static void em28xx_pre_card_setup(struct em28xx *dev)
2367 {
2368 /* Set the initial XCLK and I2C clock values based on the board
2369 definition */
2370 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2371 if (!dev->board.is_em2800)
2372 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2373 msleep(50);
2374
2375 /* request some modules */
2376 switch (dev->model) {
2377 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2378 /* Sets the msp34xx I2S speed */
2379 dev->i2s_speed = 2048000;
2380 break;
2381 case EM2861_BOARD_KWORLD_PVRTV_300U:
2382 case EM2880_BOARD_KWORLD_DVB_305U:
2383 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2384 msleep(10);
2385 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2386 msleep(10);
2387 break;
2388 case EM2870_BOARD_COMPRO_VIDEOMATE:
2389 /* TODO: someone can do some cleanup here...
2390 not everything's needed */
2391 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2392 msleep(10);
2393 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2394 msleep(10);
2395 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2396 mdelay(70);
2397 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2398 mdelay(70);
2399 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2400 mdelay(70);
2401 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2402 mdelay(70);
2403 break;
2404 case EM2870_BOARD_TERRATEC_XS_MT2060:
2405 /* this device needs some gpio writes to get the DVB-T
2406 demod work */
2407 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2408 mdelay(70);
2409 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2410 mdelay(70);
2411 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2412 mdelay(70);
2413 break;
2414 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2415 /* this device needs some gpio writes to get the
2416 DVB-T demod work */
2417 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2418 mdelay(70);
2419 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2420 mdelay(70);
2421 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2422 mdelay(70);
2423 break;
2424 case EM2820_BOARD_GADMEI_UTV310:
2425 case EM2820_BOARD_MSI_VOX_USB_2:
2426 /* enables audio for that devices */
2427 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2428 break;
2429
2430 case EM2882_BOARD_KWORLD_ATSC_315U:
2431 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2432 msleep(10);
2433 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2434 msleep(10);
2435 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2436 msleep(10);
2437 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2438 msleep(10);
2439 break;
2440
2441 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2442 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2443 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2444 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2445 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2446 msleep(10);
2447 em28xx_write_regs(dev, 0x08, "\xff", 1);
2448 msleep(10);
2449 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2450 msleep(10);
2451 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2452
2453 break;
2454 case EM2860_BOARD_EASYCAP:
2455 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2456 break;
2457
2458 case EM2820_BOARD_IODATA_GVMVP_SZ:
2459 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2460 msleep(70);
2461 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2462 msleep(10);
2463 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2464 msleep(70);
2465 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2466 msleep(70);
2467 break;
2468 }
2469
2470 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2471 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2472
2473 /* Unlock device */
2474 em28xx_set_mode(dev, EM28XX_SUSPEND);
2475 }
2476
2477 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2478 {
2479 memset(ctl, 0, sizeof(*ctl));
2480
2481 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2482 ctl->max_len = 64;
2483 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2484
2485 switch (dev->model) {
2486 case EM2880_BOARD_EMPIRE_DUAL_TV:
2487 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2488 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2489 ctl->demod = XC3028_FE_ZARLINK456;
2490 break;
2491 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2492 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2493 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2494 ctl->demod = XC3028_FE_ZARLINK456;
2495 break;
2496 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2497 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2498 ctl->demod = XC3028_FE_DEFAULT;
2499 break;
2500 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2501 ctl->demod = XC3028_FE_DEFAULT;
2502 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2503 break;
2504 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2505 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2506 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2507 /* FIXME: Better to specify the needed IF */
2508 ctl->demod = XC3028_FE_DEFAULT;
2509 break;
2510 case EM2883_BOARD_KWORLD_HYBRID_330U:
2511 case EM2882_BOARD_DIKOM_DK300:
2512 case EM2882_BOARD_KWORLD_VS_DVBT:
2513 ctl->demod = XC3028_FE_CHINA;
2514 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2515 break;
2516 case EM2882_BOARD_EVGA_INDTUBE:
2517 ctl->demod = XC3028_FE_CHINA;
2518 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2519 break;
2520 default:
2521 ctl->demod = XC3028_FE_OREN538;
2522 }
2523 }
2524
2525 static void em28xx_tuner_setup(struct em28xx *dev)
2526 {
2527 struct tuner_setup tun_setup;
2528 struct v4l2_frequency f;
2529
2530 if (dev->tuner_type == TUNER_ABSENT)
2531 return;
2532
2533 memset(&tun_setup, 0, sizeof(tun_setup));
2534
2535 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2536 tun_setup.tuner_callback = em28xx_tuner_callback;
2537
2538 if (dev->board.radio.type) {
2539 tun_setup.type = dev->board.radio.type;
2540 tun_setup.addr = dev->board.radio_addr;
2541
2542 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2543 }
2544
2545 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2546 tun_setup.type = dev->tuner_type;
2547 tun_setup.addr = dev->tuner_addr;
2548
2549 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2550 }
2551
2552 if (dev->tda9887_conf) {
2553 struct v4l2_priv_tun_config tda9887_cfg;
2554
2555 tda9887_cfg.tuner = TUNER_TDA9887;
2556 tda9887_cfg.priv = &dev->tda9887_conf;
2557
2558 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2559 }
2560
2561 if (dev->tuner_type == TUNER_XC2028) {
2562 struct v4l2_priv_tun_config xc2028_cfg;
2563 struct xc2028_ctrl ctl;
2564
2565 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2566 memset(&ctl, 0, sizeof(ctl));
2567
2568 em28xx_setup_xc3028(dev, &ctl);
2569
2570 xc2028_cfg.tuner = TUNER_XC2028;
2571 xc2028_cfg.priv = &ctl;
2572
2573 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2574 }
2575
2576 /* configure tuner */
2577 f.tuner = 0;
2578 f.type = V4L2_TUNER_ANALOG_TV;
2579 f.frequency = 9076; /* just a magic number */
2580 dev->ctl_freq = f.frequency;
2581 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2582 }
2583
2584 static int em28xx_hint_board(struct em28xx *dev)
2585 {
2586 int i;
2587
2588 /* HINT method: EEPROM
2589 *
2590 * This method works only for boards with eeprom.
2591 * Uses a hash of all eeprom bytes. The hash should be
2592 * unique for a vendor/tuner pair.
2593 * There are a high chance that tuners for different
2594 * video standards produce different hashes.
2595 */
2596 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2597 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2598 dev->model = em28xx_eeprom_hash[i].model;
2599 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2600
2601 em28xx_errdev("Your board has no unique USB ID.\n");
2602 em28xx_errdev("A hint were successfully done, "
2603 "based on eeprom hash.\n");
2604 em28xx_errdev("This method is not 100%% failproof.\n");
2605 em28xx_errdev("If the board were missdetected, "
2606 "please email this log to:\n");
2607 em28xx_errdev("\tV4L Mailing List "
2608 " <linux-media@vger.kernel.org>\n");
2609 em28xx_errdev("Board detected as %s\n",
2610 em28xx_boards[dev->model].name);
2611
2612 return 0;
2613 }
2614 }
2615
2616 /* HINT method: I2C attached devices
2617 *
2618 * This method works for all boards.
2619 * Uses a hash of i2c scanned devices.
2620 * Devices with the same i2c attached chips will
2621 * be considered equal.
2622 * This method is less precise than the eeprom one.
2623 */
2624
2625 /* user did not request i2c scanning => do it now */
2626 if (!dev->i2c_hash)
2627 em28xx_do_i2c_scan(dev);
2628
2629 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2630 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2631 dev->model = em28xx_i2c_hash[i].model;
2632 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2633 em28xx_errdev("Your board has no unique USB ID.\n");
2634 em28xx_errdev("A hint were successfully done, "
2635 "based on i2c devicelist hash.\n");
2636 em28xx_errdev("This method is not 100%% failproof.\n");
2637 em28xx_errdev("If the board were missdetected, "
2638 "please email this log to:\n");
2639 em28xx_errdev("\tV4L Mailing List "
2640 " <linux-media@vger.kernel.org>\n");
2641 em28xx_errdev("Board detected as %s\n",
2642 em28xx_boards[dev->model].name);
2643
2644 return 0;
2645 }
2646 }
2647
2648 em28xx_errdev("Your board has no unique USB ID and thus need a "
2649 "hint to be detected.\n");
2650 em28xx_errdev("You may try to use card=<n> insmod option to "
2651 "workaround that.\n");
2652 em28xx_errdev("Please send an email with this log to:\n");
2653 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2654 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2655 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2656
2657 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2658 " insmod option:\n");
2659 for (i = 0; i < em28xx_bcount; i++) {
2660 em28xx_errdev(" card=%d -> %s\n",
2661 i, em28xx_boards[i].name);
2662 }
2663 return -1;
2664 }
2665
2666 static void em28xx_card_setup(struct em28xx *dev)
2667 {
2668 /*
2669 * If the device can be a webcam, seek for a sensor.
2670 * If sensor is not found, then it isn't a webcam.
2671 */
2672 if (dev->board.is_webcam) {
2673 if (em28xx_hint_sensor(dev) < 0)
2674 dev->board.is_webcam = 0;
2675 else
2676 dev->progressive = 1;
2677 }
2678
2679 if (!dev->board.is_webcam) {
2680 switch (dev->model) {
2681 case EM2820_BOARD_UNKNOWN:
2682 case EM2800_BOARD_UNKNOWN:
2683 /*
2684 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2685 *
2686 * This occurs because they share identical USB vendor and
2687 * product IDs.
2688 *
2689 * What we do here is look up the EEPROM hash of the K-WORLD
2690 * and if it is found then we decide that we do not have
2691 * a DIGIVOX and reset the device to the K-WORLD instead.
2692 *
2693 * This solution is only valid if they do not share eeprom
2694 * hash identities which has not been determined as yet.
2695 */
2696 if (em28xx_hint_board(dev) < 0)
2697 em28xx_errdev("Board not discovered\n");
2698 else {
2699 em28xx_set_model(dev);
2700 em28xx_pre_card_setup(dev);
2701 }
2702 break;
2703 default:
2704 em28xx_set_model(dev);
2705 }
2706 }
2707
2708 em28xx_info("Identified as %s (card=%d)\n",
2709 dev->board.name, dev->model);
2710
2711 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2712 if (em28xx_boards[dev->model].tuner_addr)
2713 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2714
2715 if (em28xx_boards[dev->model].tda9887_conf)
2716 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2717
2718 /* request some modules */
2719 switch (dev->model) {
2720 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2721 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2722 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2723 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2724 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2725 {
2726 struct tveeprom tv;
2727 #if defined(CONFIG_MODULES) && defined(MODULE)
2728 request_module("tveeprom");
2729 #endif
2730 /* Call first TVeeprom */
2731
2732 dev->i2c_client.addr = 0xa0 >> 1;
2733 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2734
2735 dev->tuner_type = tv.tuner_type;
2736
2737 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2738 dev->i2s_speed = 2048000;
2739 dev->board.has_msp34xx = 1;
2740 }
2741 break;
2742 }
2743 case EM2882_BOARD_KWORLD_ATSC_315U:
2744 em28xx_write_reg(dev, 0x0d, 0x42);
2745 msleep(10);
2746 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2747 msleep(10);
2748 break;
2749 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2750 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2751 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2752 break;
2753 case EM2820_BOARD_UNKNOWN:
2754 case EM2800_BOARD_UNKNOWN:
2755 /*
2756 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2757 *
2758 * This occurs because they share identical USB vendor and
2759 * product IDs.
2760 *
2761 * What we do here is look up the EEPROM hash of the K-WORLD
2762 * and if it is found then we decide that we do not have
2763 * a DIGIVOX and reset the device to the K-WORLD instead.
2764 *
2765 * This solution is only valid if they do not share eeprom
2766 * hash identities which has not been determined as yet.
2767 */
2768 case EM2880_BOARD_MSI_DIGIVOX_AD:
2769 if (!em28xx_hint_board(dev))
2770 em28xx_set_model(dev);
2771
2772 /* In cases where we had to use a board hint, the call to
2773 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2774 so make the call now so the analog GPIOs are set properly
2775 before probing the i2c bus. */
2776 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2777 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2778 break;
2779
2780 /*
2781 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2782 *
2783 * This occurs because they share identical USB vendor and
2784 * product IDs.
2785 *
2786 * What we do here is look up the EEPROM hash of the Dikom
2787 * and if it is found then we decide that we do not have
2788 * a Kworld and reset the device to the Dikom instead.
2789 *
2790 * This solution is only valid if they do not share eeprom
2791 * hash identities which has not been determined as yet.
2792 */
2793 case EM2882_BOARD_KWORLD_VS_DVBT:
2794 if (!em28xx_hint_board(dev))
2795 em28xx_set_model(dev);
2796
2797 /* In cases where we had to use a board hint, the call to
2798 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2799 so make the call now so the analog GPIOs are set properly
2800 before probing the i2c bus. */
2801 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2802 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2803 break;
2804 }
2805
2806 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2807 em28xx_errdev("\n\n");
2808 em28xx_errdev("The support for this board weren't "
2809 "valid yet.\n");
2810 em28xx_errdev("Please send a report of having this working\n");
2811 em28xx_errdev("not to V4L mailing list (and/or to other "
2812 "addresses)\n\n");
2813 }
2814
2815 /* Allow override tuner type by a module parameter */
2816 if (tuner >= 0)
2817 dev->tuner_type = tuner;
2818
2819 /* request some modules */
2820 if (dev->board.has_msp34xx)
2821 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2822 "msp3400", 0, msp3400_addrs);
2823
2824 if (dev->board.decoder == EM28XX_SAA711X)
2825 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2826 "saa7115_auto", 0, saa711x_addrs);
2827
2828 if (dev->board.decoder == EM28XX_TVP5150)
2829 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2830 "tvp5150", 0, tvp5150_addrs);
2831
2832 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2833 struct mt9v011_platform_data pdata;
2834 struct i2c_board_info mt9v011_info = {
2835 .type = "mt9v011",
2836 .addr = 0xba >> 1,
2837 .platform_data = &pdata,
2838 };
2839
2840 pdata.xtal = dev->sensor_xtal;
2841 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2842 &mt9v011_info, NULL);
2843 }
2844
2845
2846 if (dev->board.adecoder == EM28XX_TVAUDIO)
2847 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2848 "tvaudio", dev->board.tvaudio_addr, NULL);
2849
2850 if (dev->board.tuner_type != TUNER_ABSENT) {
2851 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2852
2853 if (dev->board.radio.type)
2854 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2855 "tuner", dev->board.radio_addr, NULL);
2856
2857 if (has_demod)
2858 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2859 &dev->i2c_adap, "tuner",
2860 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2861 if (dev->tuner_addr == 0) {
2862 enum v4l2_i2c_tuner_type type =
2863 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2864 struct v4l2_subdev *sd;
2865
2866 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2867 &dev->i2c_adap, "tuner",
2868 0, v4l2_i2c_tuner_addrs(type));
2869
2870 if (sd)
2871 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2872 } else {
2873 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2874 "tuner", dev->tuner_addr, NULL);
2875 }
2876 }
2877
2878 em28xx_tuner_setup(dev);
2879 }
2880
2881
2882 #if defined(CONFIG_MODULES) && defined(MODULE)
2883 static void request_module_async(struct work_struct *work)
2884 {
2885 struct em28xx *dev = container_of(work,
2886 struct em28xx, request_module_wk);
2887
2888 if (dev->has_audio_class)
2889 request_module("snd-usb-audio");
2890 else if (dev->has_alsa_audio)
2891 request_module("em28xx-alsa");
2892
2893 if (dev->board.has_dvb)
2894 request_module("em28xx-dvb");
2895 if (dev->board.has_ir_i2c && !disable_ir)
2896 request_module("em28xx-rc");
2897 }
2898
2899 static void request_modules(struct em28xx *dev)
2900 {
2901 INIT_WORK(&dev->request_module_wk, request_module_async);
2902 schedule_work(&dev->request_module_wk);
2903 }
2904
2905 static void flush_request_modules(struct em28xx *dev)
2906 {
2907 flush_work_sync(&dev->request_module_wk);
2908 }
2909 #else
2910 #define request_modules(dev)
2911 #define flush_request_modules(dev)
2912 #endif /* CONFIG_MODULES */
2913
2914 /*
2915 * em28xx_release_resources()
2916 * unregisters the v4l2,i2c and usb devices
2917 * called when the device gets disconnected or at module unload
2918 */
2919 void em28xx_release_resources(struct em28xx *dev)
2920 {
2921 /*FIXME: I2C IR should be disconnected */
2922
2923 em28xx_release_analog_resources(dev);
2924
2925 em28xx_i2c_unregister(dev);
2926
2927 v4l2_device_unregister(&dev->v4l2_dev);
2928
2929 usb_put_dev(dev->udev);
2930
2931 /* Mark device as unused */
2932 clear_bit(dev->devno, &em28xx_devused);
2933 };
2934
2935 /*
2936 * em28xx_init_dev()
2937 * allocates and inits the device structs, registers i2c bus and v4l device
2938 */
2939 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2940 struct usb_interface *interface,
2941 int minor)
2942 {
2943 int retval;
2944
2945 dev->udev = udev;
2946 mutex_init(&dev->ctrl_urb_lock);
2947 spin_lock_init(&dev->slock);
2948
2949 dev->em28xx_write_regs = em28xx_write_regs;
2950 dev->em28xx_read_reg = em28xx_read_reg;
2951 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2952 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2953 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2954 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2955
2956 em28xx_set_model(dev);
2957
2958 /* Set the default GPO/GPIO for legacy devices */
2959 dev->reg_gpo_num = EM2880_R04_GPO;
2960 dev->reg_gpio_num = EM28XX_R08_GPIO;
2961
2962 dev->wait_after_write = 5;
2963
2964 /* Based on the Chip ID, set the device configuration */
2965 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2966 if (retval > 0) {
2967 dev->chip_id = retval;
2968
2969 switch (dev->chip_id) {
2970 case CHIP_ID_EM2800:
2971 em28xx_info("chip ID is em2800\n");
2972 break;
2973 case CHIP_ID_EM2710:
2974 em28xx_info("chip ID is em2710\n");
2975 break;
2976 case CHIP_ID_EM2750:
2977 em28xx_info("chip ID is em2750\n");
2978 break;
2979 case CHIP_ID_EM2820:
2980 em28xx_info("chip ID is em2820 (or em2710)\n");
2981 break;
2982 case CHIP_ID_EM2840:
2983 em28xx_info("chip ID is em2840\n");
2984 break;
2985 case CHIP_ID_EM2860:
2986 em28xx_info("chip ID is em2860\n");
2987 break;
2988 case CHIP_ID_EM2870:
2989 em28xx_info("chip ID is em2870\n");
2990 dev->wait_after_write = 0;
2991 break;
2992 case CHIP_ID_EM2874:
2993 em28xx_info("chip ID is em2874\n");
2994 dev->reg_gpio_num = EM2874_R80_GPIO;
2995 dev->wait_after_write = 0;
2996 break;
2997 case CHIP_ID_EM28174:
2998 em28xx_info("chip ID is em28174\n");
2999 dev->reg_gpio_num = EM2874_R80_GPIO;
3000 dev->wait_after_write = 0;
3001 break;
3002 case CHIP_ID_EM2883:
3003 em28xx_info("chip ID is em2882/em2883\n");
3004 dev->wait_after_write = 0;
3005 break;
3006 case CHIP_ID_EM2884:
3007 em28xx_info("chip ID is em2884\n");
3008 dev->reg_gpio_num = EM2874_R80_GPIO;
3009 dev->wait_after_write = 0;
3010 break;
3011 default:
3012 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
3013 }
3014 }
3015
3016 if (dev->is_audio_only) {
3017 retval = em28xx_audio_setup(dev);
3018 if (retval)
3019 return -ENODEV;
3020 em28xx_init_extension(dev);
3021
3022 return 0;
3023 }
3024
3025 /* Prepopulate cached GPO register content */
3026 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3027 if (retval >= 0)
3028 dev->reg_gpo = retval;
3029
3030 em28xx_pre_card_setup(dev);
3031
3032 if (!dev->board.is_em2800) {
3033 /* Resets I2C speed */
3034 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3035 if (retval < 0) {
3036 em28xx_errdev("%s: em28xx_write_reg failed!"
3037 " retval [%d]\n",
3038 __func__, retval);
3039 return retval;
3040 }
3041 }
3042
3043 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3044 if (retval < 0) {
3045 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3046 return retval;
3047 }
3048
3049 /* register i2c bus */
3050 retval = em28xx_i2c_register(dev);
3051 if (retval < 0) {
3052 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3053 __func__, retval);
3054 goto unregister_dev;
3055 }
3056
3057 /*
3058 * Default format, used for tvp5150 or saa711x output formats
3059 */
3060 dev->vinmode = 0x10;
3061 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
3062 EM28XX_VINCTRL_CCIR656_ENABLE;
3063
3064 /* Do board specific init and eeprom reading */
3065 em28xx_card_setup(dev);
3066
3067 /* Configure audio */
3068 retval = em28xx_audio_setup(dev);
3069 if (retval < 0) {
3070 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3071 __func__, retval);
3072 goto fail;
3073 }
3074
3075 /* wake i2c devices */
3076 em28xx_wake_i2c(dev);
3077
3078 /* init video dma queues */
3079 INIT_LIST_HEAD(&dev->vidq.active);
3080 INIT_LIST_HEAD(&dev->vbiq.active);
3081
3082 if (dev->board.has_msp34xx) {
3083 /* Send a reset to other chips via gpio */
3084 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3085 if (retval < 0) {
3086 em28xx_errdev("%s: em28xx_write_reg - "
3087 "msp34xx(1) failed! error [%d]\n",
3088 __func__, retval);
3089 goto fail;
3090 }
3091 msleep(3);
3092
3093 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3094 if (retval < 0) {
3095 em28xx_errdev("%s: em28xx_write_reg - "
3096 "msp34xx(2) failed! error [%d]\n",
3097 __func__, retval);
3098 goto fail;
3099 }
3100 msleep(3);
3101 }
3102
3103 retval = em28xx_register_analog_devices(dev);
3104 if (retval < 0) {
3105 goto fail;
3106 }
3107
3108 /* Save some power by putting tuner to sleep */
3109 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3110
3111 return 0;
3112
3113 fail:
3114 em28xx_i2c_unregister(dev);
3115
3116 unregister_dev:
3117 v4l2_device_unregister(&dev->v4l2_dev);
3118
3119 return retval;
3120 }
3121
3122 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3123 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3124
3125 /*
3126 * em28xx_usb_probe()
3127 * checks for supported devices
3128 */
3129 static int em28xx_usb_probe(struct usb_interface *interface,
3130 const struct usb_device_id *id)
3131 {
3132 struct usb_device *udev;
3133 struct em28xx *dev = NULL;
3134 int retval;
3135 bool has_audio = false, has_video = false, has_dvb = false;
3136 int i, nr;
3137 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3138 char *speed;
3139
3140 udev = usb_get_dev(interface_to_usbdev(interface));
3141
3142 /* Check to see next free device and mark as used */
3143 do {
3144 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3145 if (nr >= EM28XX_MAXBOARDS) {
3146 /* No free device slots */
3147 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3148 EM28XX_MAXBOARDS);
3149 retval = -ENOMEM;
3150 goto err_no_slot;
3151 }
3152 } while (test_and_set_bit(nr, &em28xx_devused));
3153
3154 /* Don't register audio interfaces */
3155 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3156 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3157 "interface %i, class %i\n",
3158 le16_to_cpu(udev->descriptor.idVendor),
3159 le16_to_cpu(udev->descriptor.idProduct),
3160 ifnum,
3161 interface->altsetting[0].desc.bInterfaceClass);
3162
3163 retval = -ENODEV;
3164 goto err;
3165 }
3166
3167 /* allocate memory for our device state and initialize it */
3168 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3169 if (dev == NULL) {
3170 em28xx_err(DRIVER_NAME ": out of memory!\n");
3171 retval = -ENOMEM;
3172 goto err;
3173 }
3174
3175 /* compute alternate max packet sizes */
3176 dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3177 interface->num_altsetting, GFP_KERNEL);
3178 if (dev->alt_max_pkt_size == NULL) {
3179 em28xx_errdev("out of memory!\n");
3180 kfree(dev);
3181 retval = -ENOMEM;
3182 goto err;
3183 }
3184
3185 /* Get endpoints */
3186 for (i = 0; i < interface->num_altsetting; i++) {
3187 int ep;
3188
3189 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3190 const struct usb_endpoint_descriptor *e;
3191 int sizedescr, size;
3192
3193 e = &interface->altsetting[i].endpoint[ep].desc;
3194
3195 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3196 size = sizedescr & 0x7ff;
3197
3198 if (udev->speed == USB_SPEED_HIGH)
3199 size = size * hb_mult(sizedescr);
3200
3201 if (usb_endpoint_xfer_isoc(e) &&
3202 usb_endpoint_dir_in(e)) {
3203 switch (e->bEndpointAddress) {
3204 case EM28XX_EP_AUDIO:
3205 has_audio = true;
3206 break;
3207 case EM28XX_EP_ANALOG:
3208 has_video = true;
3209 dev->alt_max_pkt_size[i] = size;
3210 break;
3211 case EM28XX_EP_DIGITAL:
3212 has_dvb = true;
3213 if (size > dev->dvb_max_pkt_size) {
3214 dev->dvb_max_pkt_size = size;
3215 dev->dvb_alt = i;
3216 }
3217 break;
3218 }
3219 }
3220 }
3221 }
3222
3223 if (!(has_audio || has_video || has_dvb)) {
3224 retval = -ENODEV;
3225 goto err_free;
3226 }
3227
3228 switch (udev->speed) {
3229 case USB_SPEED_LOW:
3230 speed = "1.5";
3231 break;
3232 case USB_SPEED_UNKNOWN:
3233 case USB_SPEED_FULL:
3234 speed = "12";
3235 break;
3236 case USB_SPEED_HIGH:
3237 speed = "480";
3238 break;
3239 default:
3240 speed = "unknown";
3241 }
3242
3243 printk(KERN_INFO DRIVER_NAME
3244 ": New device %s %s @ %s Mbps "
3245 "(%04x:%04x, interface %d, class %d)\n",
3246 udev->manufacturer ? udev->manufacturer : "",
3247 udev->product ? udev->product : "",
3248 speed,
3249 le16_to_cpu(udev->descriptor.idVendor),
3250 le16_to_cpu(udev->descriptor.idProduct),
3251 ifnum,
3252 interface->altsetting->desc.bInterfaceNumber);
3253
3254 if (has_audio)
3255 printk(KERN_INFO DRIVER_NAME
3256 ": Audio Vendor Class interface %i found\n",
3257 ifnum);
3258 if (has_video)
3259 printk(KERN_INFO DRIVER_NAME
3260 ": Video interface %i found\n",
3261 ifnum);
3262 if (has_dvb)
3263 printk(KERN_INFO DRIVER_NAME
3264 ": DVB interface %i found\n",
3265 ifnum);
3266
3267 /*
3268 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3269 * video stream wouldn't likely work, since 12 Mbps is generally
3270 * not enough even for most Digital TV streams.
3271 */
3272 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3273 printk(DRIVER_NAME ": Device initialization failed.\n");
3274 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3275 " USB 2.0 port.\n");
3276 retval = -ENODEV;
3277 goto err_free;
3278 }
3279
3280 snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3281 dev->devno = nr;
3282 dev->model = id->driver_info;
3283 dev->alt = -1;
3284 dev->is_audio_only = has_audio && !(has_video || has_dvb);
3285 dev->has_alsa_audio = has_audio;
3286 dev->audio_ifnum = ifnum;
3287
3288 /* Checks if audio is provided by some interface */
3289 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3290 struct usb_interface *uif = udev->config->interface[i];
3291 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3292 dev->has_audio_class = 1;
3293 break;
3294 }
3295 }
3296
3297 dev->num_alt = interface->num_altsetting;
3298
3299 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3300 dev->model = card[nr];
3301
3302 /* save our data pointer in this interface device */
3303 usb_set_intfdata(interface, dev);
3304
3305 /* allocate device struct */
3306 mutex_init(&dev->lock);
3307 mutex_lock(&dev->lock);
3308 retval = em28xx_init_dev(dev, udev, interface, nr);
3309 if (retval) {
3310 goto unlock_and_free;
3311 }
3312
3313 if (has_dvb) {
3314 /* pre-allocate DVB isoc transfer buffers */
3315 retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
3316 EM28XX_DVB_MAX_PACKETS,
3317 EM28XX_DVB_NUM_BUFS,
3318 dev->dvb_max_pkt_size);
3319 if (retval) {
3320 goto unlock_and_free;
3321 }
3322 }
3323
3324 request_modules(dev);
3325
3326 /* Should be the last thing to do, to avoid newer udev's to
3327 open the device before fully initializing it
3328 */
3329 mutex_unlock(&dev->lock);
3330
3331 /*
3332 * These extensions can be modules. If the modules are already
3333 * loaded then we can initialise the device now, otherwise we
3334 * will initialise it when the modules load instead.
3335 */
3336 em28xx_init_extension(dev);
3337
3338 return 0;
3339
3340 unlock_and_free:
3341 mutex_unlock(&dev->lock);
3342
3343 err_free:
3344 kfree(dev->alt_max_pkt_size);
3345 kfree(dev);
3346
3347 err:
3348 clear_bit(nr, &em28xx_devused);
3349
3350 err_no_slot:
3351 usb_put_dev(udev);
3352 return retval;
3353 }
3354
3355 /*
3356 * em28xx_usb_disconnect()
3357 * called when the device gets disconnected
3358 * video device will be unregistered on v4l2_close in case it is still open
3359 */
3360 static void em28xx_usb_disconnect(struct usb_interface *interface)
3361 {
3362 struct em28xx *dev;
3363
3364 dev = usb_get_intfdata(interface);
3365 usb_set_intfdata(interface, NULL);
3366
3367 if (!dev)
3368 return;
3369
3370 if (dev->is_audio_only) {
3371 mutex_lock(&dev->lock);
3372 em28xx_close_extension(dev);
3373 mutex_unlock(&dev->lock);
3374 return;
3375 }
3376
3377 em28xx_info("disconnecting %s\n", dev->vdev->name);
3378
3379 flush_request_modules(dev);
3380
3381 /* wait until all current v4l2 io is finished then deallocate
3382 resources */
3383 mutex_lock(&dev->lock);
3384
3385 v4l2_device_disconnect(&dev->v4l2_dev);
3386
3387 if (dev->users) {
3388 em28xx_warn
3389 ("device %s is open! Deregistration and memory "
3390 "deallocation are deferred on close.\n",
3391 video_device_node_name(dev->vdev));
3392
3393 dev->state |= DEV_MISCONFIGURED;
3394 em28xx_uninit_isoc(dev, dev->mode);
3395 dev->state |= DEV_DISCONNECTED;
3396 } else {
3397 dev->state |= DEV_DISCONNECTED;
3398 em28xx_release_resources(dev);
3399 }
3400
3401 /* free DVB isoc buffers */
3402 em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
3403
3404 mutex_unlock(&dev->lock);
3405
3406 em28xx_close_extension(dev);
3407
3408 if (!dev->users) {
3409 kfree(dev->alt_max_pkt_size);
3410 kfree(dev);
3411 }
3412 }
3413
3414 static struct usb_driver em28xx_usb_driver = {
3415 .name = "em28xx",
3416 .probe = em28xx_usb_probe,
3417 .disconnect = em28xx_usb_disconnect,
3418 .id_table = em28xx_id_table,
3419 };
3420
3421 module_usb_driver(em28xx_usb_driver);
Linux kernel - Deliverables
This page took 0.105348 seconds and 5 git commands to generate.