projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
V4L/DVB: em28xx: add Dikom DK300 hybrid USB tuner
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/delay.h>
28 #include <linux/i2c.h>
29 #include <linux/usb.h>
30 #include <media/tuner.h>
31 #include <media/msp3400.h>
32 #include <media/saa7115.h>
33 #include <media/tvp5150.h>
34 #include <media/tvaudio.h>
35 #include <media/i2c-addr.h>
36 #include <media/tveeprom.h>
37 #include <media/v4l2-common.h>
38 #include <media/v4l2-chip-ident.h>
39
40 #include "em28xx.h"
41
42 #define DRIVER_NAME "em28xx"
43
44 static int tuner = -1;
45 module_param(tuner, int, 0444);
46 MODULE_PARM_DESC(tuner, "tuner type");
47
48 static unsigned int disable_ir;
49 module_param(disable_ir, int, 0444);
50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
51
52 static unsigned int disable_usb_speed_check;
53 module_param(disable_usb_speed_check, int, 0444);
54 MODULE_PARM_DESC(disable_usb_speed_check,
55 "override min bandwidth requirement of 480M bps");
56
57 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
58 module_param_array(card, int, NULL, 0444);
59 MODULE_PARM_DESC(card, "card type");
60
61 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
62 static unsigned long em28xx_devused;
63
64 struct em28xx_hash_table {
65 unsigned long hash;
66 unsigned int model;
67 unsigned int tuner;
68 };
69
70 /*
71 * Reset sequences for analog/digital modes
72 */
73
74 /* Reset for the most [analog] boards */
75 static struct em28xx_reg_seq default_analog[] = {
76 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
77 { -1, -1, -1, -1},
78 };
79
80 /* Reset for the most [digital] boards */
81 static struct em28xx_reg_seq default_digital[] = {
82 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
83 { -1, -1, -1, -1},
84 };
85
86 /* Board Hauppauge WinTV HVR 900 analog */
87 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
88 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
89 {0x05, 0xff, 0x10, 10},
90 { -1, -1, -1, -1},
91 };
92
93 /* Board Hauppauge WinTV HVR 900 digital */
94 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
95 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
96 {EM2880_R04_GPO, 0x04, 0x0f, 10},
97 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
98 { -1, -1, -1, -1},
99 };
100
101 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
102 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
103 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
104 { -1, -1, -1, -1},
105 };
106
107 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
108
109 /* Board - EM2870 Kworld 355u
110 Analog - No input analog */
111
112 /* Board - EM2882 Kworld 315U digital */
113 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
114 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
115 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
116 {EM2880_R04_GPO, 0x04, 0xff, 10},
117 {EM2880_R04_GPO, 0x0c, 0xff, 10},
118 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
119 { -1, -1, -1, -1},
120 };
121
122 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
123 {EM2880_R04_GPO, 0x08, 0xff, 10},
124 {EM2880_R04_GPO, 0x0c, 0xff, 10},
125 {EM2880_R04_GPO, 0x08, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 { -1, -1, -1, -1},
128 };
129
130 static struct em28xx_reg_seq kworld_330u_analog[] = {
131 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
132 {EM2880_R04_GPO, 0x00, 0xff, 10},
133 { -1, -1, -1, -1},
134 };
135
136 static struct em28xx_reg_seq kworld_330u_digital[] = {
137 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
138 {EM2880_R04_GPO, 0x08, 0xff, 10},
139 { -1, -1, -1, -1},
140 };
141
142 /* Evga inDtube
143 GPIO0 - Enable digital power (s5h1409) - low to enable
144 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
145 GPIO4 - xc3028 reset
146 GOP3 - s5h1409 reset
147 */
148 static struct em28xx_reg_seq evga_indtube_analog[] = {
149 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
150 { -1, -1, -1, -1},
151 };
152
153 static struct em28xx_reg_seq evga_indtube_digital[] = {
154 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
155 {EM2880_R04_GPO, 0x04, 0xff, 10},
156 {EM2880_R04_GPO, 0x0c, 0xff, 1},
157 { -1, -1, -1, -1},
158 };
159
160 /* Pinnacle Hybrid Pro eb1a:2881 */
161 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
162 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
163 { -1, -1, -1, -1},
164 };
165
166 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
167 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
168 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
169 {EM2880_R04_GPO, 0x0c, 0xff, 1},
170 { -1, -1, -1, -1},
171 };
172
173 /* eb1a:2868 Reddo DVB-C USB TV Box
174 GPIO4 - CU1216L NIM
175 Other GPIOs seems to be don't care. */
176 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
177 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
178 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
179 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
180 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
181 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
182 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
183 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
184 {-1, -1, -1, -1},
185 };
186
187 /* Callback for the most boards */
188 static struct em28xx_reg_seq default_tuner_gpio[] = {
189 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
190 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
191 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
192 { -1, -1, -1, -1},
193 };
194
195 /* Mute/unmute */
196 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
197 {EM28XX_R08_GPIO, 5, 7, 10},
198 { -1, -1, -1, -1},
199 };
200
201 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
202 {EM28XX_R08_GPIO, 4, 7, 10},
203 { -1, -1, -1, -1},
204 };
205
206 static struct em28xx_reg_seq compro_mute_gpio[] = {
207 {EM28XX_R08_GPIO, 6, 7, 10},
208 { -1, -1, -1, -1},
209 };
210
211 /* Terratec AV350 */
212 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
213 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
214 { -1, -1, -1, -1},
215 };
216
217 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
218 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
219 { -1, -1, -1, -1},
220 };
221
222 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
223 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
224 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
225 { -1, -1, -1, -1},
226 };
227
228 static struct em28xx_reg_seq vc211a_enable[] = {
229 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
230 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
231 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
232 { -1, -1, -1, -1},
233 };
234
235 static struct em28xx_reg_seq dikom_dk300_digital[] = {
236 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
237 {EM2880_R04_GPO, 0x08, 0xff, 10},
238 { -1, -1, -1, -1},
239 };
240
241
242 /*
243 * Board definitions
244 */
245 struct em28xx_board em28xx_boards[] = {
246 [EM2750_BOARD_UNKNOWN] = {
247 .name = "EM2710/EM2750/EM2751 webcam grabber",
248 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
249 .tuner_type = TUNER_ABSENT,
250 .is_webcam = 1,
251 .input = { {
252 .type = EM28XX_VMUX_COMPOSITE1,
253 .vmux = 0,
254 .amux = EM28XX_AMUX_VIDEO,
255 .gpio = silvercrest_reg_seq,
256 } },
257 },
258 [EM2800_BOARD_UNKNOWN] = {
259 .name = "Unknown EM2800 video grabber",
260 .is_em2800 = 1,
261 .tda9887_conf = TDA9887_PRESENT,
262 .decoder = EM28XX_SAA711X,
263 .tuner_type = TUNER_ABSENT,
264 .input = { {
265 .type = EM28XX_VMUX_COMPOSITE1,
266 .vmux = SAA7115_COMPOSITE0,
267 .amux = EM28XX_AMUX_LINE_IN,
268 }, {
269 .type = EM28XX_VMUX_SVIDEO,
270 .vmux = SAA7115_SVIDEO3,
271 .amux = EM28XX_AMUX_LINE_IN,
272 } },
273 },
274 [EM2820_BOARD_UNKNOWN] = {
275 .name = "Unknown EM2750/28xx video grabber",
276 .tuner_type = TUNER_ABSENT,
277 .is_webcam = 1, /* To enable sensor probe */
278 },
279 [EM2750_BOARD_DLCW_130] = {
280 /* Beijing Huaqi Information Digital Technology Co., Ltd */
281 .name = "Huaqi DLCW-130",
282 .valid = EM28XX_BOARD_NOT_VALIDATED,
283 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
284 .tuner_type = TUNER_ABSENT,
285 .is_webcam = 1,
286 .input = { {
287 .type = EM28XX_VMUX_COMPOSITE1,
288 .vmux = 0,
289 .amux = EM28XX_AMUX_VIDEO,
290 } },
291 },
292 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
293 .name = "Kworld PVR TV 2800 RF",
294 .tuner_type = TUNER_TEMIC_PAL,
295 .tda9887_conf = TDA9887_PRESENT,
296 .decoder = EM28XX_SAA711X,
297 .input = { {
298 .type = EM28XX_VMUX_COMPOSITE1,
299 .vmux = SAA7115_COMPOSITE0,
300 .amux = EM28XX_AMUX_LINE_IN,
301 }, {
302 .type = EM28XX_VMUX_SVIDEO,
303 .vmux = SAA7115_SVIDEO3,
304 .amux = EM28XX_AMUX_LINE_IN,
305 } },
306 },
307 [EM2820_BOARD_GADMEI_TVR200] = {
308 .name = "Gadmei TVR200",
309 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
310 .tda9887_conf = TDA9887_PRESENT,
311 .decoder = EM28XX_SAA711X,
312 .input = { {
313 .type = EM28XX_VMUX_TELEVISION,
314 .vmux = SAA7115_COMPOSITE2,
315 .amux = EM28XX_AMUX_LINE_IN,
316 }, {
317 .type = EM28XX_VMUX_COMPOSITE1,
318 .vmux = SAA7115_COMPOSITE0,
319 .amux = EM28XX_AMUX_LINE_IN,
320 }, {
321 .type = EM28XX_VMUX_SVIDEO,
322 .vmux = SAA7115_SVIDEO3,
323 .amux = EM28XX_AMUX_LINE_IN,
324 } },
325 },
326 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
327 .name = "Terratec Cinergy 250 USB",
328 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
329 .has_ir_i2c = 1,
330 .tda9887_conf = TDA9887_PRESENT,
331 .decoder = EM28XX_SAA711X,
332 .input = { {
333 .type = EM28XX_VMUX_TELEVISION,
334 .vmux = SAA7115_COMPOSITE2,
335 .amux = EM28XX_AMUX_LINE_IN,
336 }, {
337 .type = EM28XX_VMUX_COMPOSITE1,
338 .vmux = SAA7115_COMPOSITE0,
339 .amux = EM28XX_AMUX_LINE_IN,
340 }, {
341 .type = EM28XX_VMUX_SVIDEO,
342 .vmux = SAA7115_SVIDEO3,
343 .amux = EM28XX_AMUX_LINE_IN,
344 } },
345 },
346 [EM2820_BOARD_PINNACLE_USB_2] = {
347 .name = "Pinnacle PCTV USB 2",
348 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
349 .has_ir_i2c = 1,
350 .tda9887_conf = TDA9887_PRESENT,
351 .decoder = EM28XX_SAA711X,
352 .input = { {
353 .type = EM28XX_VMUX_TELEVISION,
354 .vmux = SAA7115_COMPOSITE2,
355 .amux = EM28XX_AMUX_VIDEO,
356 }, {
357 .type = EM28XX_VMUX_COMPOSITE1,
358 .vmux = SAA7115_COMPOSITE0,
359 .amux = EM28XX_AMUX_LINE_IN,
360 }, {
361 .type = EM28XX_VMUX_SVIDEO,
362 .vmux = SAA7115_SVIDEO3,
363 .amux = EM28XX_AMUX_LINE_IN,
364 } },
365 },
366 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
367 .name = "Hauppauge WinTV USB 2",
368 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
369 .tda9887_conf = TDA9887_PRESENT |
370 TDA9887_PORT1_ACTIVE |
371 TDA9887_PORT2_ACTIVE,
372 .decoder = EM28XX_TVP5150,
373 .has_msp34xx = 1,
374 .has_ir_i2c = 1,
375 .input = { {
376 .type = EM28XX_VMUX_TELEVISION,
377 .vmux = TVP5150_COMPOSITE0,
378 .amux = MSP_INPUT_DEFAULT,
379 }, {
380 .type = EM28XX_VMUX_SVIDEO,
381 .vmux = TVP5150_SVIDEO,
382 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
383 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
384 } },
385 },
386 [EM2820_BOARD_DLINK_USB_TV] = {
387 .name = "D-Link DUB-T210 TV Tuner",
388 .valid = EM28XX_BOARD_NOT_VALIDATED,
389 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
390 .tda9887_conf = TDA9887_PRESENT,
391 .decoder = EM28XX_SAA711X,
392 .input = { {
393 .type = EM28XX_VMUX_TELEVISION,
394 .vmux = SAA7115_COMPOSITE2,
395 .amux = EM28XX_AMUX_LINE_IN,
396 }, {
397 .type = EM28XX_VMUX_COMPOSITE1,
398 .vmux = SAA7115_COMPOSITE0,
399 .amux = EM28XX_AMUX_LINE_IN,
400 }, {
401 .type = EM28XX_VMUX_SVIDEO,
402 .vmux = SAA7115_SVIDEO3,
403 .amux = EM28XX_AMUX_LINE_IN,
404 } },
405 },
406 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
407 .name = "Hercules Smart TV USB 2.0",
408 .valid = EM28XX_BOARD_NOT_VALIDATED,
409 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
410 .tda9887_conf = TDA9887_PRESENT,
411 .decoder = EM28XX_SAA711X,
412 .input = { {
413 .type = EM28XX_VMUX_TELEVISION,
414 .vmux = SAA7115_COMPOSITE2,
415 .amux = EM28XX_AMUX_LINE_IN,
416 }, {
417 .type = EM28XX_VMUX_COMPOSITE1,
418 .vmux = SAA7115_COMPOSITE0,
419 .amux = EM28XX_AMUX_LINE_IN,
420 }, {
421 .type = EM28XX_VMUX_SVIDEO,
422 .vmux = SAA7115_SVIDEO3,
423 .amux = EM28XX_AMUX_LINE_IN,
424 } },
425 },
426 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
427 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
428 .valid = EM28XX_BOARD_NOT_VALIDATED,
429 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
430 .tda9887_conf = TDA9887_PRESENT,
431 .decoder = EM28XX_SAA711X,
432 .input = { {
433 .type = EM28XX_VMUX_TELEVISION,
434 .vmux = SAA7115_COMPOSITE2,
435 .amux = EM28XX_AMUX_VIDEO,
436 }, {
437 .type = EM28XX_VMUX_COMPOSITE1,
438 .vmux = SAA7115_COMPOSITE0,
439 .amux = EM28XX_AMUX_LINE_IN,
440 }, {
441 .type = EM28XX_VMUX_SVIDEO,
442 .vmux = SAA7115_SVIDEO3,
443 .amux = EM28XX_AMUX_LINE_IN,
444 } },
445 },
446 [EM2820_BOARD_GADMEI_UTV310] = {
447 .name = "Gadmei UTV310",
448 .valid = EM28XX_BOARD_NOT_VALIDATED,
449 .tuner_type = TUNER_TNF_5335MF,
450 .tda9887_conf = TDA9887_PRESENT,
451 .decoder = EM28XX_SAA711X,
452 .input = { {
453 .type = EM28XX_VMUX_TELEVISION,
454 .vmux = SAA7115_COMPOSITE1,
455 .amux = EM28XX_AMUX_LINE_IN,
456 }, {
457 .type = EM28XX_VMUX_COMPOSITE1,
458 .vmux = SAA7115_COMPOSITE0,
459 .amux = EM28XX_AMUX_LINE_IN,
460 }, {
461 .type = EM28XX_VMUX_SVIDEO,
462 .vmux = SAA7115_SVIDEO3,
463 .amux = EM28XX_AMUX_LINE_IN,
464 } },
465 },
466 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
467 .name = "Leadtek Winfast USB II Deluxe",
468 .valid = EM28XX_BOARD_NOT_VALIDATED,
469 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
470 .has_ir_i2c = 1,
471 .tvaudio_addr = 0x58,
472 .tda9887_conf = TDA9887_PRESENT |
473 TDA9887_PORT2_ACTIVE |
474 TDA9887_QSS,
475 .decoder = EM28XX_SAA711X,
476 .adecoder = EM28XX_TVAUDIO,
477 .input = { {
478 .type = EM28XX_VMUX_TELEVISION,
479 .vmux = SAA7115_COMPOSITE4,
480 .amux = EM28XX_AMUX_AUX,
481 }, {
482 .type = EM28XX_VMUX_COMPOSITE1,
483 .vmux = SAA7115_COMPOSITE5,
484 .amux = EM28XX_AMUX_LINE_IN,
485 }, {
486 .type = EM28XX_VMUX_SVIDEO,
487 .vmux = SAA7115_SVIDEO3,
488 .amux = EM28XX_AMUX_LINE_IN,
489 } },
490 .radio = {
491 .type = EM28XX_RADIO,
492 .amux = EM28XX_AMUX_AUX,
493 }
494 },
495 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
496 .name = "Videology 20K14XUSB USB2.0",
497 .valid = EM28XX_BOARD_NOT_VALIDATED,
498 .tuner_type = TUNER_ABSENT,
499 .is_webcam = 1,
500 .input = { {
501 .type = EM28XX_VMUX_COMPOSITE1,
502 .vmux = 0,
503 .amux = EM28XX_AMUX_VIDEO,
504 } },
505 },
506 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
507 .name = "Silvercrest Webcam 1.3mpix",
508 .tuner_type = TUNER_ABSENT,
509 .is_webcam = 1,
510 .input = { {
511 .type = EM28XX_VMUX_COMPOSITE1,
512 .vmux = 0,
513 .amux = EM28XX_AMUX_VIDEO,
514 .gpio = silvercrest_reg_seq,
515 } },
516 },
517 [EM2821_BOARD_SUPERCOMP_USB_2] = {
518 .name = "Supercomp USB 2.0 TV",
519 .valid = EM28XX_BOARD_NOT_VALIDATED,
520 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
521 .tda9887_conf = TDA9887_PRESENT |
522 TDA9887_PORT1_ACTIVE |
523 TDA9887_PORT2_ACTIVE,
524 .decoder = EM28XX_SAA711X,
525 .input = { {
526 .type = EM28XX_VMUX_TELEVISION,
527 .vmux = SAA7115_COMPOSITE2,
528 .amux = EM28XX_AMUX_LINE_IN,
529 }, {
530 .type = EM28XX_VMUX_COMPOSITE1,
531 .vmux = SAA7115_COMPOSITE0,
532 .amux = EM28XX_AMUX_VIDEO,
533 }, {
534 .type = EM28XX_VMUX_SVIDEO,
535 .vmux = SAA7115_SVIDEO3,
536 .amux = EM28XX_AMUX_LINE_IN,
537 } },
538 },
539 [EM2821_BOARD_USBGEAR_VD204] = {
540 .name = "Usbgear VD204v9",
541 .valid = EM28XX_BOARD_NOT_VALIDATED,
542 .tuner_type = TUNER_ABSENT, /* Capture only device */
543 .decoder = EM28XX_SAA711X,
544 .input = { {
545 .type = EM28XX_VMUX_COMPOSITE1,
546 .vmux = SAA7115_COMPOSITE0,
547 .amux = EM28XX_AMUX_LINE_IN,
548 }, {
549 .type = EM28XX_VMUX_SVIDEO,
550 .vmux = SAA7115_SVIDEO3,
551 .amux = EM28XX_AMUX_LINE_IN,
552 } },
553 },
554 [EM2860_BOARD_NETGMBH_CAM] = {
555 /* Beijing Huaqi Information Digital Technology Co., Ltd */
556 .name = "NetGMBH Cam",
557 .valid = EM28XX_BOARD_NOT_VALIDATED,
558 .tuner_type = TUNER_ABSENT,
559 .is_webcam = 1,
560 .input = { {
561 .type = EM28XX_VMUX_COMPOSITE1,
562 .vmux = 0,
563 .amux = EM28XX_AMUX_VIDEO,
564 } },
565 },
566 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
567 .name = "Typhoon DVD Maker",
568 .decoder = EM28XX_SAA711X,
569 .tuner_type = TUNER_ABSENT, /* Capture only device */
570 .input = { {
571 .type = EM28XX_VMUX_COMPOSITE1,
572 .vmux = SAA7115_COMPOSITE0,
573 .amux = EM28XX_AMUX_LINE_IN,
574 }, {
575 .type = EM28XX_VMUX_SVIDEO,
576 .vmux = SAA7115_SVIDEO3,
577 .amux = EM28XX_AMUX_LINE_IN,
578 } },
579 },
580 [EM2860_BOARD_GADMEI_UTV330] = {
581 .name = "Gadmei UTV330",
582 .valid = EM28XX_BOARD_NOT_VALIDATED,
583 .tuner_type = TUNER_TNF_5335MF,
584 .tda9887_conf = TDA9887_PRESENT,
585 .decoder = EM28XX_SAA711X,
586 .input = { {
587 .type = EM28XX_VMUX_TELEVISION,
588 .vmux = SAA7115_COMPOSITE2,
589 .amux = EM28XX_AMUX_VIDEO,
590 }, {
591 .type = EM28XX_VMUX_COMPOSITE1,
592 .vmux = SAA7115_COMPOSITE0,
593 .amux = EM28XX_AMUX_LINE_IN,
594 }, {
595 .type = EM28XX_VMUX_SVIDEO,
596 .vmux = SAA7115_SVIDEO3,
597 .amux = EM28XX_AMUX_LINE_IN,
598 } },
599 },
600 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
601 .name = "Gadmei UTV330+",
602 .tuner_type = TUNER_TNF_5335MF,
603 .tda9887_conf = TDA9887_PRESENT,
604 .ir_codes = &ir_codes_gadmei_rm008z_table,
605 .decoder = EM28XX_SAA711X,
606 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
607 .input = { {
608 .type = EM28XX_VMUX_TELEVISION,
609 .vmux = SAA7115_COMPOSITE2,
610 .amux = EM28XX_AMUX_VIDEO,
611 }, {
612 .type = EM28XX_VMUX_COMPOSITE1,
613 .vmux = SAA7115_COMPOSITE0,
614 .amux = EM28XX_AMUX_LINE_IN,
615 }, {
616 .type = EM28XX_VMUX_SVIDEO,
617 .vmux = SAA7115_SVIDEO3,
618 .amux = EM28XX_AMUX_LINE_IN,
619 } },
620 },
621 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
622 .name = "Terratec Cinergy A Hybrid XS",
623 .valid = EM28XX_BOARD_NOT_VALIDATED,
624 .tuner_type = TUNER_XC2028,
625 .tuner_gpio = default_tuner_gpio,
626 .decoder = EM28XX_TVP5150,
627
628 .input = { {
629 .type = EM28XX_VMUX_TELEVISION,
630 .vmux = TVP5150_COMPOSITE0,
631 .amux = EM28XX_AMUX_VIDEO,
632 .gpio = hauppauge_wintv_hvr_900_analog,
633 }, {
634 .type = EM28XX_VMUX_COMPOSITE1,
635 .vmux = TVP5150_COMPOSITE1,
636 .amux = EM28XX_AMUX_LINE_IN,
637 .gpio = hauppauge_wintv_hvr_900_analog,
638 }, {
639 .type = EM28XX_VMUX_SVIDEO,
640 .vmux = TVP5150_SVIDEO,
641 .amux = EM28XX_AMUX_LINE_IN,
642 .gpio = hauppauge_wintv_hvr_900_analog,
643 } },
644 },
645 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
646 .name = "KWorld PVRTV 300U",
647 .valid = EM28XX_BOARD_NOT_VALIDATED,
648 .tuner_type = TUNER_XC2028,
649 .tuner_gpio = default_tuner_gpio,
650 .decoder = EM28XX_TVP5150,
651 .input = { {
652 .type = EM28XX_VMUX_TELEVISION,
653 .vmux = TVP5150_COMPOSITE0,
654 .amux = EM28XX_AMUX_VIDEO,
655 }, {
656 .type = EM28XX_VMUX_COMPOSITE1,
657 .vmux = TVP5150_COMPOSITE1,
658 .amux = EM28XX_AMUX_LINE_IN,
659 }, {
660 .type = EM28XX_VMUX_SVIDEO,
661 .vmux = TVP5150_SVIDEO,
662 .amux = EM28XX_AMUX_LINE_IN,
663 } },
664 },
665 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
666 .name = "Yakumo MovieMixer",
667 .tuner_type = TUNER_ABSENT, /* Capture only device */
668 .decoder = EM28XX_TVP5150,
669 .input = { {
670 .type = EM28XX_VMUX_TELEVISION,
671 .vmux = TVP5150_COMPOSITE0,
672 .amux = EM28XX_AMUX_VIDEO,
673 }, {
674 .type = EM28XX_VMUX_COMPOSITE1,
675 .vmux = TVP5150_COMPOSITE1,
676 .amux = EM28XX_AMUX_LINE_IN,
677 }, {
678 .type = EM28XX_VMUX_SVIDEO,
679 .vmux = TVP5150_SVIDEO,
680 .amux = EM28XX_AMUX_LINE_IN,
681 } },
682 },
683 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
684 .name = "Plextor ConvertX PX-TV100U",
685 .tuner_type = TUNER_TNF_5335MF,
686 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
687 EM28XX_XCLK_FREQUENCY_12MHZ,
688 .tda9887_conf = TDA9887_PRESENT,
689 .decoder = EM28XX_TVP5150,
690 .has_msp34xx = 1,
691 .input = { {
692 .type = EM28XX_VMUX_TELEVISION,
693 .vmux = TVP5150_COMPOSITE0,
694 .amux = EM28XX_AMUX_LINE_IN,
695 .gpio = pinnacle_hybrid_pro_analog,
696 }, {
697 .type = EM28XX_VMUX_COMPOSITE1,
698 .vmux = TVP5150_COMPOSITE1,
699 .amux = EM28XX_AMUX_LINE_IN,
700 .gpio = pinnacle_hybrid_pro_analog,
701 }, {
702 .type = EM28XX_VMUX_SVIDEO,
703 .vmux = TVP5150_SVIDEO,
704 .amux = EM28XX_AMUX_LINE_IN,
705 .gpio = pinnacle_hybrid_pro_analog,
706 } },
707 },
708
709 /* Those boards with em2870 are DVB Only*/
710
711 [EM2870_BOARD_TERRATEC_XS] = {
712 .name = "Terratec Cinergy T XS",
713 .valid = EM28XX_BOARD_NOT_VALIDATED,
714 .tuner_type = TUNER_XC2028,
715 .tuner_gpio = default_tuner_gpio,
716 },
717 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
718 .name = "Terratec Cinergy T XS (MT2060)",
719 .valid = EM28XX_BOARD_NOT_VALIDATED,
720 .tuner_type = TUNER_ABSENT, /* MT2060 */
721 },
722 [EM2870_BOARD_KWORLD_350U] = {
723 .name = "Kworld 350 U DVB-T",
724 .valid = EM28XX_BOARD_NOT_VALIDATED,
725 .tuner_type = TUNER_XC2028,
726 .tuner_gpio = default_tuner_gpio,
727 },
728 [EM2870_BOARD_KWORLD_355U] = {
729 .name = "Kworld 355 U DVB-T",
730 .valid = EM28XX_BOARD_NOT_VALIDATED,
731 },
732 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
733 .name = "Pinnacle PCTV DVB-T",
734 .valid = EM28XX_BOARD_NOT_VALIDATED,
735 .tuner_type = TUNER_ABSENT, /* MT2060 */
736 /* djh - I have serious doubts this is right... */
737 .xclk = EM28XX_XCLK_IR_RC5_MODE |
738 EM28XX_XCLK_FREQUENCY_10MHZ,
739 },
740 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
741 .name = "Compro, VideoMate U3",
742 .valid = EM28XX_BOARD_NOT_VALIDATED,
743 .tuner_type = TUNER_ABSENT, /* MT2060 */
744 },
745
746 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
747 .name = "Terratec Hybrid XS Secam",
748 .valid = EM28XX_BOARD_NOT_VALIDATED,
749 .has_msp34xx = 1,
750 .tuner_type = TUNER_XC2028,
751 .tuner_gpio = default_tuner_gpio,
752 .decoder = EM28XX_TVP5150,
753 .input = { {
754 .type = EM28XX_VMUX_TELEVISION,
755 .vmux = TVP5150_COMPOSITE0,
756 .amux = EM28XX_AMUX_VIDEO,
757 .gpio = default_analog,
758 }, {
759 .type = EM28XX_VMUX_COMPOSITE1,
760 .vmux = TVP5150_COMPOSITE1,
761 .amux = EM28XX_AMUX_LINE_IN,
762 .gpio = default_analog,
763 }, {
764 .type = EM28XX_VMUX_SVIDEO,
765 .vmux = TVP5150_SVIDEO,
766 .amux = EM28XX_AMUX_LINE_IN,
767 .gpio = default_analog,
768 } },
769 },
770 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
771 .name = "Hauppauge WinTV HVR 900",
772 .tda9887_conf = TDA9887_PRESENT,
773 .tuner_type = TUNER_XC2028,
774 .tuner_gpio = default_tuner_gpio,
775 .mts_firmware = 1,
776 .has_dvb = 1,
777 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
778 .ir_codes = &ir_codes_hauppauge_new_table,
779 .decoder = EM28XX_TVP5150,
780 .input = { {
781 .type = EM28XX_VMUX_TELEVISION,
782 .vmux = TVP5150_COMPOSITE0,
783 .amux = EM28XX_AMUX_VIDEO,
784 .gpio = hauppauge_wintv_hvr_900_analog,
785 }, {
786 .type = EM28XX_VMUX_COMPOSITE1,
787 .vmux = TVP5150_COMPOSITE1,
788 .amux = EM28XX_AMUX_LINE_IN,
789 .gpio = hauppauge_wintv_hvr_900_analog,
790 }, {
791 .type = EM28XX_VMUX_SVIDEO,
792 .vmux = TVP5150_SVIDEO,
793 .amux = EM28XX_AMUX_LINE_IN,
794 .gpio = hauppauge_wintv_hvr_900_analog,
795 } },
796 },
797 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
798 .name = "Hauppauge WinTV HVR 900 (R2)",
799 .tda9887_conf = TDA9887_PRESENT,
800 .tuner_type = TUNER_XC2028,
801 .tuner_gpio = default_tuner_gpio,
802 .mts_firmware = 1,
803 .ir_codes = &ir_codes_hauppauge_new_table,
804 .decoder = EM28XX_TVP5150,
805 .input = { {
806 .type = EM28XX_VMUX_TELEVISION,
807 .vmux = TVP5150_COMPOSITE0,
808 .amux = EM28XX_AMUX_VIDEO,
809 .gpio = hauppauge_wintv_hvr_900_analog,
810 }, {
811 .type = EM28XX_VMUX_COMPOSITE1,
812 .vmux = TVP5150_COMPOSITE1,
813 .amux = EM28XX_AMUX_LINE_IN,
814 .gpio = hauppauge_wintv_hvr_900_analog,
815 }, {
816 .type = EM28XX_VMUX_SVIDEO,
817 .vmux = TVP5150_SVIDEO,
818 .amux = EM28XX_AMUX_LINE_IN,
819 .gpio = hauppauge_wintv_hvr_900_analog,
820 } },
821 },
822 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
823 .name = "Hauppauge WinTV HVR 850",
824 .tuner_type = TUNER_XC2028,
825 .tuner_gpio = default_tuner_gpio,
826 .mts_firmware = 1,
827 .has_dvb = 1,
828 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
829 .ir_codes = &ir_codes_hauppauge_new_table,
830 .decoder = EM28XX_TVP5150,
831 .input = { {
832 .type = EM28XX_VMUX_TELEVISION,
833 .vmux = TVP5150_COMPOSITE0,
834 .amux = EM28XX_AMUX_VIDEO,
835 .gpio = hauppauge_wintv_hvr_900_analog,
836 }, {
837 .type = EM28XX_VMUX_COMPOSITE1,
838 .vmux = TVP5150_COMPOSITE1,
839 .amux = EM28XX_AMUX_LINE_IN,
840 .gpio = hauppauge_wintv_hvr_900_analog,
841 }, {
842 .type = EM28XX_VMUX_SVIDEO,
843 .vmux = TVP5150_SVIDEO,
844 .amux = EM28XX_AMUX_LINE_IN,
845 .gpio = hauppauge_wintv_hvr_900_analog,
846 } },
847 },
848 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
849 .name = "Hauppauge WinTV HVR 950",
850 .tuner_type = TUNER_XC2028,
851 .tuner_gpio = default_tuner_gpio,
852 .mts_firmware = 1,
853 .has_dvb = 1,
854 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
855 .ir_codes = &ir_codes_rc5_hauppauge_new_table,
856 .decoder = EM28XX_TVP5150,
857 .input = { {
858 .type = EM28XX_VMUX_TELEVISION,
859 .vmux = TVP5150_COMPOSITE0,
860 .amux = EM28XX_AMUX_VIDEO,
861 .gpio = hauppauge_wintv_hvr_900_analog,
862 }, {
863 .type = EM28XX_VMUX_COMPOSITE1,
864 .vmux = TVP5150_COMPOSITE1,
865 .amux = EM28XX_AMUX_LINE_IN,
866 .gpio = hauppauge_wintv_hvr_900_analog,
867 }, {
868 .type = EM28XX_VMUX_SVIDEO,
869 .vmux = TVP5150_SVIDEO,
870 .amux = EM28XX_AMUX_LINE_IN,
871 .gpio = hauppauge_wintv_hvr_900_analog,
872 } },
873 },
874 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
875 .name = "Pinnacle PCTV HD Pro Stick",
876 .tuner_type = TUNER_XC2028,
877 .tuner_gpio = default_tuner_gpio,
878 .mts_firmware = 1,
879 .has_dvb = 1,
880 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
881 .ir_codes = &ir_codes_pinnacle_pctv_hd_table,
882 .decoder = EM28XX_TVP5150,
883 .input = { {
884 .type = EM28XX_VMUX_TELEVISION,
885 .vmux = TVP5150_COMPOSITE0,
886 .amux = EM28XX_AMUX_VIDEO,
887 .gpio = hauppauge_wintv_hvr_900_analog,
888 }, {
889 .type = EM28XX_VMUX_COMPOSITE1,
890 .vmux = TVP5150_COMPOSITE1,
891 .amux = EM28XX_AMUX_LINE_IN,
892 .gpio = hauppauge_wintv_hvr_900_analog,
893 }, {
894 .type = EM28XX_VMUX_SVIDEO,
895 .vmux = TVP5150_SVIDEO,
896 .amux = EM28XX_AMUX_LINE_IN,
897 .gpio = hauppauge_wintv_hvr_900_analog,
898 } },
899 },
900 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
901 .name = "AMD ATI TV Wonder HD 600",
902 .tuner_type = TUNER_XC2028,
903 .tuner_gpio = default_tuner_gpio,
904 .mts_firmware = 1,
905 .has_dvb = 1,
906 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
907 .ir_codes = &ir_codes_ati_tv_wonder_hd_600_table,
908 .decoder = EM28XX_TVP5150,
909 .input = { {
910 .type = EM28XX_VMUX_TELEVISION,
911 .vmux = TVP5150_COMPOSITE0,
912 .amux = EM28XX_AMUX_VIDEO,
913 .gpio = hauppauge_wintv_hvr_900_analog,
914 }, {
915 .type = EM28XX_VMUX_COMPOSITE1,
916 .vmux = TVP5150_COMPOSITE1,
917 .amux = EM28XX_AMUX_LINE_IN,
918 .gpio = hauppauge_wintv_hvr_900_analog,
919 }, {
920 .type = EM28XX_VMUX_SVIDEO,
921 .vmux = TVP5150_SVIDEO,
922 .amux = EM28XX_AMUX_LINE_IN,
923 .gpio = hauppauge_wintv_hvr_900_analog,
924 } },
925 },
926 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
927 .name = "Terratec Hybrid XS",
928 .tuner_type = TUNER_XC2028,
929 .tuner_gpio = default_tuner_gpio,
930 .decoder = EM28XX_TVP5150,
931 .has_dvb = 1,
932 .dvb_gpio = default_digital,
933 .ir_codes = &ir_codes_terratec_cinergy_xs_table,
934 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
935 .input = { {
936 .type = EM28XX_VMUX_TELEVISION,
937 .vmux = TVP5150_COMPOSITE0,
938 .amux = EM28XX_AMUX_VIDEO,
939 .gpio = default_analog,
940 }, {
941 .type = EM28XX_VMUX_COMPOSITE1,
942 .vmux = TVP5150_COMPOSITE1,
943 .amux = EM28XX_AMUX_LINE_IN,
944 .gpio = default_analog,
945 }, {
946 .type = EM28XX_VMUX_SVIDEO,
947 .vmux = TVP5150_SVIDEO,
948 .amux = EM28XX_AMUX_LINE_IN,
949 .gpio = default_analog,
950 } },
951 },
952 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
953 as Prodigy XS with a different PID, let's keep it separated for now
954 maybe we'll need it lateron */
955 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
956 .name = "Terratec Prodigy XS",
957 .tuner_type = TUNER_XC2028,
958 .tuner_gpio = default_tuner_gpio,
959 .decoder = EM28XX_TVP5150,
960 .input = { {
961 .type = EM28XX_VMUX_TELEVISION,
962 .vmux = TVP5150_COMPOSITE0,
963 .amux = EM28XX_AMUX_VIDEO,
964 .gpio = hauppauge_wintv_hvr_900_analog,
965 }, {
966 .type = EM28XX_VMUX_COMPOSITE1,
967 .vmux = TVP5150_COMPOSITE1,
968 .amux = EM28XX_AMUX_LINE_IN,
969 .gpio = hauppauge_wintv_hvr_900_analog,
970 }, {
971 .type = EM28XX_VMUX_SVIDEO,
972 .vmux = TVP5150_SVIDEO,
973 .amux = EM28XX_AMUX_LINE_IN,
974 .gpio = hauppauge_wintv_hvr_900_analog,
975 } },
976 },
977 [EM2820_BOARD_MSI_VOX_USB_2] = {
978 .name = "MSI VOX USB 2.0",
979 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
980 .tda9887_conf = TDA9887_PRESENT |
981 TDA9887_PORT1_ACTIVE |
982 TDA9887_PORT2_ACTIVE,
983 .max_range_640_480 = 1,
984 .decoder = EM28XX_SAA711X,
985 .input = { {
986 .type = EM28XX_VMUX_TELEVISION,
987 .vmux = SAA7115_COMPOSITE4,
988 .amux = EM28XX_AMUX_VIDEO,
989 }, {
990 .type = EM28XX_VMUX_COMPOSITE1,
991 .vmux = SAA7115_COMPOSITE0,
992 .amux = EM28XX_AMUX_LINE_IN,
993 }, {
994 .type = EM28XX_VMUX_SVIDEO,
995 .vmux = SAA7115_SVIDEO3,
996 .amux = EM28XX_AMUX_LINE_IN,
997 } },
998 },
999 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1000 .name = "Terratec Cinergy 200 USB",
1001 .is_em2800 = 1,
1002 .has_ir_i2c = 1,
1003 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1004 .tda9887_conf = TDA9887_PRESENT,
1005 .decoder = EM28XX_SAA711X,
1006 .input = { {
1007 .type = EM28XX_VMUX_TELEVISION,
1008 .vmux = SAA7115_COMPOSITE2,
1009 .amux = EM28XX_AMUX_VIDEO,
1010 }, {
1011 .type = EM28XX_VMUX_COMPOSITE1,
1012 .vmux = SAA7115_COMPOSITE0,
1013 .amux = EM28XX_AMUX_LINE_IN,
1014 }, {
1015 .type = EM28XX_VMUX_SVIDEO,
1016 .vmux = SAA7115_SVIDEO3,
1017 .amux = EM28XX_AMUX_LINE_IN,
1018 } },
1019 },
1020 [EM2800_BOARD_GRABBEEX_USB2800] = {
1021 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1022 .is_em2800 = 1,
1023 .decoder = EM28XX_SAA711X,
1024 .tuner_type = TUNER_ABSENT, /* capture only board */
1025 .input = { {
1026 .type = EM28XX_VMUX_COMPOSITE1,
1027 .vmux = SAA7115_COMPOSITE0,
1028 .amux = EM28XX_AMUX_LINE_IN,
1029 }, {
1030 .type = EM28XX_VMUX_SVIDEO,
1031 .vmux = SAA7115_SVIDEO3,
1032 .amux = EM28XX_AMUX_LINE_IN,
1033 } },
1034 },
1035 [EM2800_BOARD_VC211A] = {
1036 .name = "Actionmaster/LinXcel/Digitus VC211A",
1037 .is_em2800 = 1,
1038 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1039 .decoder = EM28XX_SAA711X,
1040 .input = { {
1041 .type = EM28XX_VMUX_COMPOSITE1,
1042 .vmux = SAA7115_COMPOSITE0,
1043 .amux = EM28XX_AMUX_LINE_IN,
1044 .gpio = vc211a_enable,
1045 }, {
1046 .type = EM28XX_VMUX_SVIDEO,
1047 .vmux = SAA7115_SVIDEO3,
1048 .amux = EM28XX_AMUX_LINE_IN,
1049 .gpio = vc211a_enable,
1050 } },
1051 },
1052 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1053 .name = "Leadtek Winfast USB II",
1054 .is_em2800 = 1,
1055 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1056 .tda9887_conf = TDA9887_PRESENT,
1057 .decoder = EM28XX_SAA711X,
1058 .input = { {
1059 .type = EM28XX_VMUX_TELEVISION,
1060 .vmux = SAA7115_COMPOSITE2,
1061 .amux = EM28XX_AMUX_VIDEO,
1062 }, {
1063 .type = EM28XX_VMUX_COMPOSITE1,
1064 .vmux = SAA7115_COMPOSITE0,
1065 .amux = EM28XX_AMUX_LINE_IN,
1066 }, {
1067 .type = EM28XX_VMUX_SVIDEO,
1068 .vmux = SAA7115_SVIDEO3,
1069 .amux = EM28XX_AMUX_LINE_IN,
1070 } },
1071 },
1072 [EM2800_BOARD_KWORLD_USB2800] = {
1073 .name = "Kworld USB2800",
1074 .is_em2800 = 1,
1075 .tuner_type = TUNER_PHILIPS_FCV1236D,
1076 .tda9887_conf = TDA9887_PRESENT,
1077 .decoder = EM28XX_SAA711X,
1078 .input = { {
1079 .type = EM28XX_VMUX_TELEVISION,
1080 .vmux = SAA7115_COMPOSITE2,
1081 .amux = EM28XX_AMUX_VIDEO,
1082 }, {
1083 .type = EM28XX_VMUX_COMPOSITE1,
1084 .vmux = SAA7115_COMPOSITE0,
1085 .amux = EM28XX_AMUX_LINE_IN,
1086 }, {
1087 .type = EM28XX_VMUX_SVIDEO,
1088 .vmux = SAA7115_SVIDEO3,
1089 .amux = EM28XX_AMUX_LINE_IN,
1090 } },
1091 },
1092 [EM2820_BOARD_PINNACLE_DVC_90] = {
1093 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1094 "/ Kworld DVD Maker 2",
1095 .tuner_type = TUNER_ABSENT, /* capture only board */
1096 .decoder = EM28XX_SAA711X,
1097 .input = { {
1098 .type = EM28XX_VMUX_COMPOSITE1,
1099 .vmux = SAA7115_COMPOSITE0,
1100 .amux = EM28XX_AMUX_LINE_IN,
1101 }, {
1102 .type = EM28XX_VMUX_SVIDEO,
1103 .vmux = SAA7115_SVIDEO3,
1104 .amux = EM28XX_AMUX_LINE_IN,
1105 } },
1106 },
1107 [EM2800_BOARD_VGEAR_POCKETTV] = {
1108 .name = "V-Gear PocketTV",
1109 .is_em2800 = 1,
1110 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1111 .tda9887_conf = TDA9887_PRESENT,
1112 .decoder = EM28XX_SAA711X,
1113 .input = { {
1114 .type = EM28XX_VMUX_TELEVISION,
1115 .vmux = SAA7115_COMPOSITE2,
1116 .amux = EM28XX_AMUX_VIDEO,
1117 }, {
1118 .type = EM28XX_VMUX_COMPOSITE1,
1119 .vmux = SAA7115_COMPOSITE0,
1120 .amux = EM28XX_AMUX_LINE_IN,
1121 }, {
1122 .type = EM28XX_VMUX_SVIDEO,
1123 .vmux = SAA7115_SVIDEO3,
1124 .amux = EM28XX_AMUX_LINE_IN,
1125 } },
1126 },
1127 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1128 .name = "Pixelview PlayTV Box 4 USB 2.0",
1129 .tda9887_conf = TDA9887_PRESENT,
1130 .tuner_type = TUNER_YMEC_TVF_5533MF,
1131 .decoder = EM28XX_SAA711X,
1132 .input = { {
1133 .type = EM28XX_VMUX_TELEVISION,
1134 .vmux = SAA7115_COMPOSITE2,
1135 .amux = EM28XX_AMUX_VIDEO,
1136 .aout = EM28XX_AOUT_MONO | /* I2S */
1137 EM28XX_AOUT_MASTER, /* Line out pin */
1138 }, {
1139 .type = EM28XX_VMUX_COMPOSITE1,
1140 .vmux = SAA7115_COMPOSITE0,
1141 .amux = EM28XX_AMUX_LINE_IN,
1142 }, {
1143 .type = EM28XX_VMUX_SVIDEO,
1144 .vmux = SAA7115_SVIDEO3,
1145 .amux = EM28XX_AMUX_LINE_IN,
1146 } },
1147 },
1148 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1149 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1150 .has_snapshot_button = 1,
1151 .tda9887_conf = TDA9887_PRESENT,
1152 .tuner_type = TUNER_YMEC_TVF_5533MF,
1153 .decoder = EM28XX_SAA711X,
1154 .input = { {
1155 .type = EM28XX_VMUX_TELEVISION,
1156 .vmux = SAA7115_COMPOSITE2,
1157 .amux = EM28XX_AMUX_VIDEO,
1158 .aout = EM28XX_AOUT_MONO | /* I2S */
1159 EM28XX_AOUT_MASTER, /* Line out pin */
1160 }, {
1161 .type = EM28XX_VMUX_COMPOSITE1,
1162 .vmux = SAA7115_COMPOSITE0,
1163 .amux = EM28XX_AMUX_LINE_IN,
1164 }, {
1165 .type = EM28XX_VMUX_SVIDEO,
1166 .vmux = SAA7115_SVIDEO3,
1167 .amux = EM28XX_AMUX_LINE_IN,
1168 } },
1169 },
1170 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1171 .name = "EM2860/SAA711X Reference Design",
1172 .has_snapshot_button = 1,
1173 .tuner_type = TUNER_ABSENT,
1174 .decoder = EM28XX_SAA711X,
1175 .input = { {
1176 .type = EM28XX_VMUX_SVIDEO,
1177 .vmux = SAA7115_SVIDEO3,
1178 }, {
1179 .type = EM28XX_VMUX_COMPOSITE1,
1180 .vmux = SAA7115_COMPOSITE0,
1181 } },
1182 },
1183 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1184 .name = "MSI DigiVox A/D",
1185 .valid = EM28XX_BOARD_NOT_VALIDATED,
1186 .tuner_type = TUNER_XC2028,
1187 .tuner_gpio = default_tuner_gpio,
1188 .decoder = EM28XX_TVP5150,
1189 .input = { {
1190 .type = EM28XX_VMUX_TELEVISION,
1191 .vmux = TVP5150_COMPOSITE0,
1192 .amux = EM28XX_AMUX_VIDEO,
1193 .gpio = em2880_msi_digivox_ad_analog,
1194 }, {
1195 .type = EM28XX_VMUX_COMPOSITE1,
1196 .vmux = TVP5150_COMPOSITE1,
1197 .amux = EM28XX_AMUX_LINE_IN,
1198 .gpio = em2880_msi_digivox_ad_analog,
1199 }, {
1200 .type = EM28XX_VMUX_SVIDEO,
1201 .vmux = TVP5150_SVIDEO,
1202 .amux = EM28XX_AMUX_LINE_IN,
1203 .gpio = em2880_msi_digivox_ad_analog,
1204 } },
1205 },
1206 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1207 .name = "MSI DigiVox A/D II",
1208 .valid = EM28XX_BOARD_NOT_VALIDATED,
1209 .tuner_type = TUNER_XC2028,
1210 .tuner_gpio = default_tuner_gpio,
1211 .decoder = EM28XX_TVP5150,
1212 .input = { {
1213 .type = EM28XX_VMUX_TELEVISION,
1214 .vmux = TVP5150_COMPOSITE0,
1215 .amux = EM28XX_AMUX_VIDEO,
1216 .gpio = em2880_msi_digivox_ad_analog,
1217 }, {
1218 .type = EM28XX_VMUX_COMPOSITE1,
1219 .vmux = TVP5150_COMPOSITE1,
1220 .amux = EM28XX_AMUX_LINE_IN,
1221 .gpio = em2880_msi_digivox_ad_analog,
1222 }, {
1223 .type = EM28XX_VMUX_SVIDEO,
1224 .vmux = TVP5150_SVIDEO,
1225 .amux = EM28XX_AMUX_LINE_IN,
1226 .gpio = em2880_msi_digivox_ad_analog,
1227 } },
1228 },
1229 [EM2880_BOARD_KWORLD_DVB_305U] = {
1230 .name = "KWorld DVB-T 305U",
1231 .valid = EM28XX_BOARD_NOT_VALIDATED,
1232 .tuner_type = TUNER_XC2028,
1233 .tuner_gpio = default_tuner_gpio,
1234 .decoder = EM28XX_TVP5150,
1235 .input = { {
1236 .type = EM28XX_VMUX_TELEVISION,
1237 .vmux = TVP5150_COMPOSITE0,
1238 .amux = EM28XX_AMUX_VIDEO,
1239 }, {
1240 .type = EM28XX_VMUX_COMPOSITE1,
1241 .vmux = TVP5150_COMPOSITE1,
1242 .amux = EM28XX_AMUX_LINE_IN,
1243 }, {
1244 .type = EM28XX_VMUX_SVIDEO,
1245 .vmux = TVP5150_SVIDEO,
1246 .amux = EM28XX_AMUX_LINE_IN,
1247 } },
1248 },
1249 [EM2880_BOARD_KWORLD_DVB_310U] = {
1250 .name = "KWorld DVB-T 310U",
1251 .tuner_type = TUNER_XC2028,
1252 .tuner_gpio = default_tuner_gpio,
1253 .has_dvb = 1,
1254 .dvb_gpio = default_digital,
1255 .mts_firmware = 1,
1256 .decoder = EM28XX_TVP5150,
1257 .input = { {
1258 .type = EM28XX_VMUX_TELEVISION,
1259 .vmux = TVP5150_COMPOSITE0,
1260 .amux = EM28XX_AMUX_VIDEO,
1261 .gpio = default_analog,
1262 }, {
1263 .type = EM28XX_VMUX_COMPOSITE1,
1264 .vmux = TVP5150_COMPOSITE1,
1265 .amux = EM28XX_AMUX_LINE_IN,
1266 .gpio = default_analog,
1267 }, { /* S-video has not been tested yet */
1268 .type = EM28XX_VMUX_SVIDEO,
1269 .vmux = TVP5150_SVIDEO,
1270 .amux = EM28XX_AMUX_LINE_IN,
1271 .gpio = default_analog,
1272 } },
1273 },
1274 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1275 .name = "KWorld ATSC 315U HDTV TV Box",
1276 .valid = EM28XX_BOARD_NOT_VALIDATED,
1277 .tuner_type = TUNER_THOMSON_DTT761X,
1278 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1279 .tda9887_conf = TDA9887_PRESENT,
1280 .decoder = EM28XX_SAA711X,
1281 .has_dvb = 1,
1282 .dvb_gpio = em2882_kworld_315u_digital,
1283 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1284 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1285 /* Analog mode - still not ready */
1286 /*.input = { {
1287 .type = EM28XX_VMUX_TELEVISION,
1288 .vmux = SAA7115_COMPOSITE2,
1289 .amux = EM28XX_AMUX_VIDEO,
1290 .gpio = em2882_kworld_315u_analog,
1291 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1292 }, {
1293 .type = EM28XX_VMUX_COMPOSITE1,
1294 .vmux = SAA7115_COMPOSITE0,
1295 .amux = EM28XX_AMUX_LINE_IN,
1296 .gpio = em2882_kworld_315u_analog1,
1297 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1298 }, {
1299 .type = EM28XX_VMUX_SVIDEO,
1300 .vmux = SAA7115_SVIDEO3,
1301 .amux = EM28XX_AMUX_LINE_IN,
1302 .gpio = em2882_kworld_315u_analog1,
1303 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1304 } }, */
1305 },
1306 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1307 .name = "Empire dual TV",
1308 .tuner_type = TUNER_XC2028,
1309 .tuner_gpio = default_tuner_gpio,
1310 .has_dvb = 1,
1311 .dvb_gpio = default_digital,
1312 .mts_firmware = 1,
1313 .decoder = EM28XX_TVP5150,
1314 .input = { {
1315 .type = EM28XX_VMUX_TELEVISION,
1316 .vmux = TVP5150_COMPOSITE0,
1317 .amux = EM28XX_AMUX_VIDEO,
1318 .gpio = default_analog,
1319 }, {
1320 .type = EM28XX_VMUX_COMPOSITE1,
1321 .vmux = TVP5150_COMPOSITE1,
1322 .amux = EM28XX_AMUX_LINE_IN,
1323 .gpio = default_analog,
1324 }, {
1325 .type = EM28XX_VMUX_SVIDEO,
1326 .vmux = TVP5150_SVIDEO,
1327 .amux = EM28XX_AMUX_LINE_IN,
1328 .gpio = default_analog,
1329 } },
1330 },
1331 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1332 .name = "DNT DA2 Hybrid",
1333 .valid = EM28XX_BOARD_NOT_VALIDATED,
1334 .tuner_type = TUNER_XC2028,
1335 .tuner_gpio = default_tuner_gpio,
1336 .decoder = EM28XX_TVP5150,
1337 .input = { {
1338 .type = EM28XX_VMUX_TELEVISION,
1339 .vmux = TVP5150_COMPOSITE0,
1340 .amux = EM28XX_AMUX_VIDEO,
1341 .gpio = default_analog,
1342 }, {
1343 .type = EM28XX_VMUX_COMPOSITE1,
1344 .vmux = TVP5150_COMPOSITE1,
1345 .amux = EM28XX_AMUX_LINE_IN,
1346 .gpio = default_analog,
1347 }, {
1348 .type = EM28XX_VMUX_SVIDEO,
1349 .vmux = TVP5150_SVIDEO,
1350 .amux = EM28XX_AMUX_LINE_IN,
1351 .gpio = default_analog,
1352 } },
1353 },
1354 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1355 .name = "Pinnacle Hybrid Pro",
1356 .tuner_type = TUNER_XC2028,
1357 .tuner_gpio = default_tuner_gpio,
1358 .decoder = EM28XX_TVP5150,
1359 .has_dvb = 1,
1360 .dvb_gpio = pinnacle_hybrid_pro_digital,
1361 .input = { {
1362 .type = EM28XX_VMUX_TELEVISION,
1363 .vmux = TVP5150_COMPOSITE0,
1364 .amux = EM28XX_AMUX_VIDEO,
1365 .gpio = pinnacle_hybrid_pro_analog,
1366 }, {
1367 .type = EM28XX_VMUX_COMPOSITE1,
1368 .vmux = TVP5150_COMPOSITE1,
1369 .amux = EM28XX_AMUX_LINE_IN,
1370 .gpio = pinnacle_hybrid_pro_analog,
1371 }, {
1372 .type = EM28XX_VMUX_SVIDEO,
1373 .vmux = TVP5150_SVIDEO,
1374 .amux = EM28XX_AMUX_LINE_IN,
1375 .gpio = pinnacle_hybrid_pro_analog,
1376 } },
1377 },
1378 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1379 .name = "Pinnacle Hybrid Pro (2)",
1380 .valid = EM28XX_BOARD_NOT_VALIDATED,
1381 .tuner_type = TUNER_XC2028,
1382 .tuner_gpio = default_tuner_gpio,
1383 .mts_firmware = 1,
1384 .decoder = EM28XX_TVP5150,
1385 .input = { {
1386 .type = EM28XX_VMUX_TELEVISION,
1387 .vmux = TVP5150_COMPOSITE0,
1388 .amux = EM28XX_AMUX_VIDEO,
1389 .gpio = hauppauge_wintv_hvr_900_analog,
1390 }, {
1391 .type = EM28XX_VMUX_COMPOSITE1,
1392 .vmux = TVP5150_COMPOSITE1,
1393 .amux = EM28XX_AMUX_LINE_IN,
1394 .gpio = hauppauge_wintv_hvr_900_analog,
1395 }, {
1396 .type = EM28XX_VMUX_SVIDEO,
1397 .vmux = TVP5150_SVIDEO,
1398 .amux = EM28XX_AMUX_LINE_IN,
1399 .gpio = hauppauge_wintv_hvr_900_analog,
1400 } },
1401 },
1402 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1403 .name = "Kworld VS-DVB-T 323UR",
1404 .valid = EM28XX_BOARD_NOT_VALIDATED,
1405 .tuner_type = TUNER_XC2028,
1406 .tuner_gpio = default_tuner_gpio,
1407 .decoder = EM28XX_TVP5150,
1408 .input = { {
1409 .type = EM28XX_VMUX_TELEVISION,
1410 .vmux = TVP5150_COMPOSITE0,
1411 .amux = EM28XX_AMUX_VIDEO,
1412 }, {
1413 .type = EM28XX_VMUX_COMPOSITE1,
1414 .vmux = TVP5150_COMPOSITE1,
1415 .amux = EM28XX_AMUX_LINE_IN,
1416 }, {
1417 .type = EM28XX_VMUX_SVIDEO,
1418 .vmux = TVP5150_SVIDEO,
1419 .amux = EM28XX_AMUX_LINE_IN,
1420 } },
1421 },
1422 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1423 .name = "Terratec Hybrid XS (em2882)",
1424 .tuner_type = TUNER_XC2028,
1425 .tuner_gpio = default_tuner_gpio,
1426 .mts_firmware = 1,
1427 .decoder = EM28XX_TVP5150,
1428 .has_dvb = 1,
1429 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1430 .ir_codes = &ir_codes_terratec_cinergy_xs_table,
1431 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1432 .input = { {
1433 .type = EM28XX_VMUX_TELEVISION,
1434 .vmux = TVP5150_COMPOSITE0,
1435 .amux = EM28XX_AMUX_VIDEO,
1436 .gpio = hauppauge_wintv_hvr_900_analog,
1437 }, {
1438 .type = EM28XX_VMUX_COMPOSITE1,
1439 .vmux = TVP5150_COMPOSITE1,
1440 .amux = EM28XX_AMUX_LINE_IN,
1441 .gpio = hauppauge_wintv_hvr_900_analog,
1442 }, {
1443 .type = EM28XX_VMUX_SVIDEO,
1444 .vmux = TVP5150_SVIDEO,
1445 .amux = EM28XX_AMUX_LINE_IN,
1446 .gpio = hauppauge_wintv_hvr_900_analog,
1447 } },
1448 },
1449 [EM2882_BOARD_DIKOM_DK300] = {
1450 .name = "Dikom DK300",
1451 .tuner_type = TUNER_XC2028,
1452 .tuner_gpio = default_tuner_gpio,
1453 .decoder = EM28XX_TVP5150,
1454 .mts_firmware = 1,
1455 .has_dvb = 1,
1456 .dvb_gpio = dikom_dk300_digital,
1457 .input = { {
1458 .type = EM28XX_VMUX_TELEVISION,
1459 .vmux = TVP5150_COMPOSITE0,
1460 .amux = EM28XX_AMUX_VIDEO,
1461 .gpio = default_analog,
1462 } },
1463 },
1464 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1465 .name = "Kworld PlusTV HD Hybrid 330",
1466 .tuner_type = TUNER_XC2028,
1467 .tuner_gpio = default_tuner_gpio,
1468 .decoder = EM28XX_TVP5150,
1469 .mts_firmware = 1,
1470 .has_dvb = 1,
1471 .dvb_gpio = kworld_330u_digital,
1472 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1473 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1474 EM28XX_I2C_EEPROM_ON_BOARD |
1475 EM28XX_I2C_EEPROM_KEY_VALID,
1476 .input = { {
1477 .type = EM28XX_VMUX_TELEVISION,
1478 .vmux = TVP5150_COMPOSITE0,
1479 .amux = EM28XX_AMUX_VIDEO,
1480 .gpio = kworld_330u_analog,
1481 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1482 }, {
1483 .type = EM28XX_VMUX_COMPOSITE1,
1484 .vmux = TVP5150_COMPOSITE1,
1485 .amux = EM28XX_AMUX_LINE_IN,
1486 .gpio = kworld_330u_analog,
1487 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1488 }, {
1489 .type = EM28XX_VMUX_SVIDEO,
1490 .vmux = TVP5150_SVIDEO,
1491 .amux = EM28XX_AMUX_LINE_IN,
1492 .gpio = kworld_330u_analog,
1493 } },
1494 },
1495 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1496 .name = "Compro VideoMate ForYou/Stereo",
1497 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1498 .tvaudio_addr = 0xb0,
1499 .tda9887_conf = TDA9887_PRESENT,
1500 .decoder = EM28XX_TVP5150,
1501 .adecoder = EM28XX_TVAUDIO,
1502 .mute_gpio = compro_mute_gpio,
1503 .input = { {
1504 .type = EM28XX_VMUX_TELEVISION,
1505 .vmux = TVP5150_COMPOSITE0,
1506 .amux = EM28XX_AMUX_VIDEO,
1507 .gpio = compro_unmute_tv_gpio,
1508 }, {
1509 .type = EM28XX_VMUX_SVIDEO,
1510 .vmux = TVP5150_SVIDEO,
1511 .amux = EM28XX_AMUX_LINE_IN,
1512 .gpio = compro_unmute_svid_gpio,
1513 } },
1514 },
1515 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1516 .name = "Kaiomy TVnPC U2",
1517 .vchannels = 3,
1518 .tuner_type = TUNER_XC2028,
1519 .tuner_addr = 0x61,
1520 .mts_firmware = 1,
1521 .decoder = EM28XX_TVP5150,
1522 .tuner_gpio = default_tuner_gpio,
1523 .ir_codes = &ir_codes_kaiomy_table,
1524 .input = { {
1525 .type = EM28XX_VMUX_TELEVISION,
1526 .vmux = TVP5150_COMPOSITE0,
1527 .amux = EM28XX_AMUX_VIDEO,
1528
1529 }, {
1530 .type = EM28XX_VMUX_COMPOSITE1,
1531 .vmux = TVP5150_COMPOSITE1,
1532 .amux = EM28XX_AMUX_LINE_IN,
1533 }, {
1534 .type = EM28XX_VMUX_SVIDEO,
1535 .vmux = TVP5150_SVIDEO,
1536 .amux = EM28XX_AMUX_LINE_IN,
1537 } },
1538 .radio = {
1539 .type = EM28XX_RADIO,
1540 .amux = EM28XX_AMUX_LINE_IN,
1541 }
1542 },
1543 [EM2860_BOARD_EASYCAP] = {
1544 .name = "Easy Cap Capture DC-60",
1545 .vchannels = 2,
1546 .tuner_type = TUNER_ABSENT,
1547 .decoder = EM28XX_SAA711X,
1548 .input = { {
1549 .type = EM28XX_VMUX_COMPOSITE1,
1550 .vmux = SAA7115_COMPOSITE0,
1551 .amux = EM28XX_AMUX_LINE_IN,
1552 }, {
1553 .type = EM28XX_VMUX_SVIDEO,
1554 .vmux = SAA7115_SVIDEO3,
1555 .amux = EM28XX_AMUX_LINE_IN,
1556 } },
1557 },
1558 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1559 .name = "IO-DATA GV-MVP/SZ",
1560 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1561 .tuner_gpio = default_tuner_gpio,
1562 .tda9887_conf = TDA9887_PRESENT,
1563 .decoder = EM28XX_TVP5150,
1564 .input = { {
1565 .type = EM28XX_VMUX_TELEVISION,
1566 .vmux = TVP5150_COMPOSITE0,
1567 .amux = EM28XX_AMUX_VIDEO,
1568 }, { /* Composite has not been tested yet */
1569 .type = EM28XX_VMUX_COMPOSITE1,
1570 .vmux = TVP5150_COMPOSITE1,
1571 .amux = EM28XX_AMUX_VIDEO,
1572 }, { /* S-video has not been tested yet */
1573 .type = EM28XX_VMUX_SVIDEO,
1574 .vmux = TVP5150_SVIDEO,
1575 .amux = EM28XX_AMUX_VIDEO,
1576 } },
1577 },
1578 [EM2860_BOARD_TERRATEC_GRABBY] = {
1579 .name = "Terratec Grabby",
1580 .vchannels = 2,
1581 .tuner_type = TUNER_ABSENT,
1582 .decoder = EM28XX_SAA711X,
1583 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1584 .input = { {
1585 .type = EM28XX_VMUX_COMPOSITE1,
1586 .vmux = SAA7115_COMPOSITE0,
1587 .amux = EM28XX_AMUX_VIDEO2,
1588 }, {
1589 .type = EM28XX_VMUX_SVIDEO,
1590 .vmux = SAA7115_SVIDEO3,
1591 .amux = EM28XX_AMUX_VIDEO2,
1592 } },
1593 },
1594 [EM2860_BOARD_TERRATEC_AV350] = {
1595 .name = "Terratec AV350",
1596 .vchannels = 2,
1597 .tuner_type = TUNER_ABSENT,
1598 .decoder = EM28XX_TVP5150,
1599 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1600 .mute_gpio = terratec_av350_mute_gpio,
1601 .input = { {
1602 .type = EM28XX_VMUX_COMPOSITE1,
1603 .vmux = TVP5150_COMPOSITE1,
1604 .amux = EM28XX_AUDIO_SRC_LINE,
1605 .gpio = terratec_av350_unmute_gpio,
1606
1607 }, {
1608 .type = EM28XX_VMUX_SVIDEO,
1609 .vmux = TVP5150_SVIDEO,
1610 .amux = EM28XX_AUDIO_SRC_LINE,
1611 .gpio = terratec_av350_unmute_gpio,
1612 } },
1613 },
1614 [EM2882_BOARD_EVGA_INDTUBE] = {
1615 .name = "Evga inDtube",
1616 .tuner_type = TUNER_XC2028,
1617 .tuner_gpio = default_tuner_gpio,
1618 .decoder = EM28XX_TVP5150,
1619 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1620 .mts_firmware = 1,
1621 .has_dvb = 1,
1622 .dvb_gpio = evga_indtube_digital,
1623 .ir_codes = &ir_codes_evga_indtube_table,
1624 .input = { {
1625 .type = EM28XX_VMUX_TELEVISION,
1626 .vmux = TVP5150_COMPOSITE0,
1627 .amux = EM28XX_AMUX_VIDEO,
1628 .gpio = evga_indtube_analog,
1629 }, {
1630 .type = EM28XX_VMUX_COMPOSITE1,
1631 .vmux = TVP5150_COMPOSITE1,
1632 .amux = EM28XX_AMUX_LINE_IN,
1633 .gpio = evga_indtube_analog,
1634 }, {
1635 .type = EM28XX_VMUX_SVIDEO,
1636 .vmux = TVP5150_SVIDEO,
1637 .amux = EM28XX_AMUX_LINE_IN,
1638 .gpio = evga_indtube_analog,
1639 } },
1640 },
1641 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1642 Infineon TUA6034) */
1643 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1644 .name = "Reddo DVB-C USB TV Box",
1645 .tuner_type = TUNER_ABSENT,
1646 .tuner_gpio = reddo_dvb_c_usb_box,
1647 .has_dvb = 1,
1648 },
1649 };
1650 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1651
1652 /* table of devices that work with this driver */
1653 struct usb_device_id em28xx_id_table[] = {
1654 { USB_DEVICE(0xeb1a, 0x2750),
1655 .driver_info = EM2750_BOARD_UNKNOWN },
1656 { USB_DEVICE(0xeb1a, 0x2751),
1657 .driver_info = EM2750_BOARD_UNKNOWN },
1658 { USB_DEVICE(0xeb1a, 0x2800),
1659 .driver_info = EM2800_BOARD_UNKNOWN },
1660 { USB_DEVICE(0xeb1a, 0x2710),
1661 .driver_info = EM2820_BOARD_UNKNOWN },
1662 { USB_DEVICE(0xeb1a, 0x2820),
1663 .driver_info = EM2820_BOARD_UNKNOWN },
1664 { USB_DEVICE(0xeb1a, 0x2821),
1665 .driver_info = EM2820_BOARD_UNKNOWN },
1666 { USB_DEVICE(0xeb1a, 0x2860),
1667 .driver_info = EM2820_BOARD_UNKNOWN },
1668 { USB_DEVICE(0xeb1a, 0x2861),
1669 .driver_info = EM2820_BOARD_UNKNOWN },
1670 { USB_DEVICE(0xeb1a, 0x2862),
1671 .driver_info = EM2820_BOARD_UNKNOWN },
1672 { USB_DEVICE(0xeb1a, 0x2870),
1673 .driver_info = EM2820_BOARD_UNKNOWN },
1674 { USB_DEVICE(0xeb1a, 0x2881),
1675 .driver_info = EM2820_BOARD_UNKNOWN },
1676 { USB_DEVICE(0xeb1a, 0x2883),
1677 .driver_info = EM2820_BOARD_UNKNOWN },
1678 { USB_DEVICE(0xeb1a, 0x2868),
1679 .driver_info = EM2820_BOARD_UNKNOWN },
1680 { USB_DEVICE(0xeb1a, 0xe300),
1681 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1682 { USB_DEVICE(0xeb1a, 0xe303),
1683 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1684 { USB_DEVICE(0xeb1a, 0xe305),
1685 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1686 { USB_DEVICE(0xeb1a, 0xe310),
1687 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1688 { USB_DEVICE(0xeb1a, 0xa313),
1689 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1690 { USB_DEVICE(0xeb1a, 0xa316),
1691 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1692 { USB_DEVICE(0xeb1a, 0xe320),
1693 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1694 { USB_DEVICE(0xeb1a, 0xe323),
1695 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1696 { USB_DEVICE(0xeb1a, 0xe350),
1697 .driver_info = EM2870_BOARD_KWORLD_350U },
1698 { USB_DEVICE(0xeb1a, 0xe355),
1699 .driver_info = EM2870_BOARD_KWORLD_355U },
1700 { USB_DEVICE(0xeb1a, 0x2801),
1701 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1702 { USB_DEVICE(0xeb1a, 0xe357),
1703 .driver_info = EM2870_BOARD_KWORLD_355U },
1704 { USB_DEVICE(0x1b80, 0xe302),
1705 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1706 { USB_DEVICE(0x1b80, 0xe304),
1707 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1708 { USB_DEVICE(0x0ccd, 0x0036),
1709 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1710 { USB_DEVICE(0x0ccd, 0x004c),
1711 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1712 { USB_DEVICE(0x0ccd, 0x004f),
1713 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1714 { USB_DEVICE(0x0ccd, 0x005e),
1715 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1716 { USB_DEVICE(0x0ccd, 0x0042),
1717 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1718 { USB_DEVICE(0x0ccd, 0x0043),
1719 .driver_info = EM2870_BOARD_TERRATEC_XS },
1720 { USB_DEVICE(0x0ccd, 0x0047),
1721 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1722 { USB_DEVICE(0x0ccd, 0x0084),
1723 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1724 { USB_DEVICE(0x0ccd, 0x0096),
1725 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1726 { USB_DEVICE(0x185b, 0x2870),
1727 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1728 { USB_DEVICE(0x185b, 0x2041),
1729 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1730 { USB_DEVICE(0x2040, 0x4200),
1731 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1732 { USB_DEVICE(0x2040, 0x4201),
1733 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1734 { USB_DEVICE(0x2040, 0x6500),
1735 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1736 { USB_DEVICE(0x2040, 0x6502),
1737 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1738 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1739 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1740 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1741 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1742 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1743 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1744 { USB_DEVICE(0x2040, 0x651f),
1745 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1746 { USB_DEVICE(0x0438, 0xb002),
1747 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1748 { USB_DEVICE(0x2001, 0xf112),
1749 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1750 { USB_DEVICE(0x2304, 0x0207),
1751 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1752 { USB_DEVICE(0x2304, 0x0208),
1753 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1754 { USB_DEVICE(0x2304, 0x021a),
1755 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1756 { USB_DEVICE(0x2304, 0x0226),
1757 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1758 { USB_DEVICE(0x2304, 0x0227),
1759 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1760 { USB_DEVICE(0x0413, 0x6023),
1761 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1762 { USB_DEVICE(0x093b, 0xa005),
1763 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1764 { USB_DEVICE(0x04bb, 0x0515),
1765 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1766 { USB_DEVICE(0xeb1a, 0x50a6),
1767 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
1768 { },
1769 };
1770 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1771
1772 /*
1773 * EEPROM hash table for devices with generic USB IDs
1774 */
1775 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1776 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1777 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1778 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1779 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1780 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1781 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1782 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1783 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
1784 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
1785 };
1786
1787 /* I2C devicelist hash table for devices with generic USB IDs */
1788 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1789 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1790 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1791 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1792 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1793 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
1794 };
1795
1796 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1797 static unsigned short saa711x_addrs[] = {
1798 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1799 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1800 I2C_CLIENT_END };
1801
1802 static unsigned short tvp5150_addrs[] = {
1803 0xb8 >> 1,
1804 0xba >> 1,
1805 I2C_CLIENT_END
1806 };
1807
1808 static unsigned short mt9v011_addrs[] = {
1809 0xba >> 1,
1810 I2C_CLIENT_END
1811 };
1812
1813 static unsigned short msp3400_addrs[] = {
1814 0x80 >> 1,
1815 0x88 >> 1,
1816 I2C_CLIENT_END
1817 };
1818
1819 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1820 {
1821 int rc = 0;
1822 struct em28xx *dev = ptr;
1823
1824 if (dev->tuner_type != TUNER_XC2028)
1825 return 0;
1826
1827 if (command != XC2028_TUNER_RESET)
1828 return 0;
1829
1830 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1831
1832 return rc;
1833 }
1834 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1835
1836 static inline void em28xx_set_model(struct em28xx *dev)
1837 {
1838 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1839
1840 /* Those are the default values for the majority of boards
1841 Use those values if not specified otherwise at boards entry
1842 */
1843 if (!dev->board.xclk)
1844 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1845 EM28XX_XCLK_FREQUENCY_12MHZ;
1846
1847 if (!dev->board.i2c_speed)
1848 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1849 EM28XX_I2C_FREQ_100_KHZ;
1850 }
1851
1852
1853 /* FIXME: Should be replaced by a proper mt9m111 driver */
1854 static int em28xx_initialize_mt9m111(struct em28xx *dev)
1855 {
1856 int i;
1857 unsigned char regs[][3] = {
1858 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
1859 { 0x0d, 0x00, 0x00, },
1860 { 0x0a, 0x00, 0x21, },
1861 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
1862 };
1863
1864 for (i = 0; i < ARRAY_SIZE(regs); i++)
1865 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1866
1867 return 0;
1868 }
1869
1870
1871 /* FIXME: Should be replaced by a proper mt9m001 driver */
1872 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1873 {
1874 int i;
1875 unsigned char regs[][3] = {
1876 { 0x0d, 0x00, 0x01, },
1877 { 0x0d, 0x00, 0x00, },
1878 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
1879 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
1880 { 0x20, 0x11, 0x00, },
1881 { 0x06, 0x00, 0x10, },
1882 { 0x2b, 0x00, 0x24, },
1883 { 0x2e, 0x00, 0x24, },
1884 { 0x35, 0x00, 0x24, },
1885 { 0x2d, 0x00, 0x20, },
1886 { 0x2c, 0x00, 0x20, },
1887 { 0x09, 0x0a, 0xd4, },
1888 { 0x35, 0x00, 0x57, },
1889 };
1890
1891 for (i = 0; i < ARRAY_SIZE(regs); i++)
1892 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1893
1894 return 0;
1895 }
1896
1897 /* HINT method: webcam I2C chips
1898 *
1899 * This method works for webcams with Micron sensors
1900 */
1901 static int em28xx_hint_sensor(struct em28xx *dev)
1902 {
1903 int rc;
1904 char *sensor_name;
1905 unsigned char cmd;
1906 __be16 version_be;
1907 u16 version;
1908
1909 /* Micron sensor detection */
1910 dev->i2c_client.addr = 0xba >> 1;
1911 cmd = 0;
1912 i2c_master_send(&dev->i2c_client, &cmd, 1);
1913 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
1914 if (rc != 2)
1915 return -EINVAL;
1916
1917 version = be16_to_cpu(version_be);
1918 switch (version) {
1919 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
1920 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
1921 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
1922 em28xx_set_model(dev);
1923
1924 sensor_name = "mt9v011";
1925 dev->em28xx_sensor = EM28XX_MT9V011;
1926 dev->sensor_xres = 640;
1927 dev->sensor_yres = 480;
1928 /*
1929 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
1930 * the Silvercrest cam I have here for testing - for higher
1931 * resolutions, a high clock cause horizontal artifacts, so we
1932 * need to use a lower xclk frequency.
1933 * Yet, it would be possible to adjust xclk depending on the
1934 * desired resolution, since this affects directly the
1935 * frame rate.
1936 */
1937 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
1938 dev->sensor_xtal = 4300000;
1939
1940 /* probably means GRGB 16 bit bayer */
1941 dev->vinmode = 0x0d;
1942 dev->vinctl = 0x00;
1943
1944 break;
1945
1946 case 0x143a: /* MT9M111 as found in the ECS G200 */
1947 dev->model = EM2750_BOARD_UNKNOWN;
1948 em28xx_set_model(dev);
1949
1950 sensor_name = "mt9m111";
1951 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
1952 dev->em28xx_sensor = EM28XX_MT9M111;
1953 em28xx_initialize_mt9m111(dev);
1954 dev->sensor_xres = 640;
1955 dev->sensor_yres = 512;
1956
1957 dev->vinmode = 0x0a;
1958 dev->vinctl = 0x00;
1959
1960 break;
1961
1962 case 0x8431:
1963 dev->model = EM2750_BOARD_UNKNOWN;
1964 em28xx_set_model(dev);
1965
1966 sensor_name = "mt9m001";
1967 dev->em28xx_sensor = EM28XX_MT9M001;
1968 em28xx_initialize_mt9m001(dev);
1969 dev->sensor_xres = 1280;
1970 dev->sensor_yres = 1024;
1971
1972 /* probably means BGGR 16 bit bayer */
1973 dev->vinmode = 0x0c;
1974 dev->vinctl = 0x00;
1975
1976 break;
1977 default:
1978 printk("Unknown Micron Sensor 0x%04x\n", version);
1979 return -EINVAL;
1980 }
1981
1982 /* Setup webcam defaults */
1983 em28xx_pre_card_setup(dev);
1984
1985 em28xx_errdev("Sensor is %s, using model %s entry.\n",
1986 sensor_name, em28xx_boards[dev->model].name);
1987
1988 return 0;
1989 }
1990
1991 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1992 * this won't work for boards with generic PCI IDs
1993 */
1994 void em28xx_pre_card_setup(struct em28xx *dev)
1995 {
1996 /* Set the initial XCLK and I2C clock values based on the board
1997 definition */
1998 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1999 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2000 msleep(50);
2001
2002 /* request some modules */
2003 switch (dev->model) {
2004 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2005 /* Sets the msp34xx I2S speed */
2006 dev->i2s_speed = 2048000;
2007 break;
2008 case EM2861_BOARD_KWORLD_PVRTV_300U:
2009 case EM2880_BOARD_KWORLD_DVB_305U:
2010 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2011 msleep(10);
2012 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2013 msleep(10);
2014 break;
2015 case EM2870_BOARD_COMPRO_VIDEOMATE:
2016 /* TODO: someone can do some cleanup here...
2017 not everything's needed */
2018 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2019 msleep(10);
2020 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2021 msleep(10);
2022 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2023 mdelay(70);
2024 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2025 mdelay(70);
2026 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2027 mdelay(70);
2028 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2029 mdelay(70);
2030 break;
2031 case EM2870_BOARD_TERRATEC_XS_MT2060:
2032 /* this device needs some gpio writes to get the DVB-T
2033 demod work */
2034 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2035 mdelay(70);
2036 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2037 mdelay(70);
2038 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2039 mdelay(70);
2040 break;
2041 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2042 /* this device needs some gpio writes to get the
2043 DVB-T demod work */
2044 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2045 mdelay(70);
2046 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2047 mdelay(70);
2048 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2049 mdelay(70);
2050 break;
2051 case EM2820_BOARD_GADMEI_UTV310:
2052 case EM2820_BOARD_MSI_VOX_USB_2:
2053 /* enables audio for that devices */
2054 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2055 break;
2056
2057 case EM2882_BOARD_KWORLD_ATSC_315U:
2058 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2059 msleep(10);
2060 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2061 msleep(10);
2062 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2063 msleep(10);
2064 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2065 msleep(10);
2066 break;
2067
2068 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2069 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2070 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2071 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2072 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2073 msleep(10);
2074 em28xx_write_regs(dev, 0x08, "\xff", 1);
2075 msleep(10);
2076 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2077 msleep(10);
2078 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2079
2080 break;
2081 case EM2860_BOARD_EASYCAP:
2082 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2083 break;
2084
2085 case EM2820_BOARD_IODATA_GVMVP_SZ:
2086 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2087 msleep(70);
2088 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2089 msleep(10);
2090 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2091 msleep(70);
2092 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2093 msleep(70);
2094 break;
2095 }
2096
2097 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2098 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2099
2100 /* Unlock device */
2101 em28xx_set_mode(dev, EM28XX_SUSPEND);
2102 }
2103
2104 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2105 {
2106 memset(ctl, 0, sizeof(*ctl));
2107
2108 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2109 ctl->max_len = 64;
2110 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2111
2112 switch (dev->model) {
2113 case EM2880_BOARD_EMPIRE_DUAL_TV:
2114 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2115 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2116 ctl->demod = XC3028_FE_ZARLINK456;
2117 break;
2118 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2119 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2120 ctl->demod = XC3028_FE_ZARLINK456;
2121 break;
2122 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2123 /* djh - Not sure which demod we need here */
2124 ctl->demod = XC3028_FE_DEFAULT;
2125 break;
2126 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2127 ctl->demod = XC3028_FE_DEFAULT;
2128 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2129 break;
2130 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2131 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2132 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2133 /* FIXME: Better to specify the needed IF */
2134 ctl->demod = XC3028_FE_DEFAULT;
2135 break;
2136 case EM2883_BOARD_KWORLD_HYBRID_330U:
2137 case EM2882_BOARD_DIKOM_DK300:
2138 ctl->demod = XC3028_FE_CHINA;
2139 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2140 break;
2141 case EM2882_BOARD_EVGA_INDTUBE:
2142 ctl->demod = XC3028_FE_CHINA;
2143 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2144 break;
2145 default:
2146 ctl->demod = XC3028_FE_OREN538;
2147 }
2148 }
2149
2150 static void em28xx_tuner_setup(struct em28xx *dev)
2151 {
2152 struct tuner_setup tun_setup;
2153 struct v4l2_frequency f;
2154
2155 if (dev->tuner_type == TUNER_ABSENT)
2156 return;
2157
2158 memset(&tun_setup, 0, sizeof(tun_setup));
2159
2160 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2161 tun_setup.tuner_callback = em28xx_tuner_callback;
2162
2163 if (dev->board.radio.type) {
2164 tun_setup.type = dev->board.radio.type;
2165 tun_setup.addr = dev->board.radio_addr;
2166
2167 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2168 }
2169
2170 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2171 tun_setup.type = dev->tuner_type;
2172 tun_setup.addr = dev->tuner_addr;
2173
2174 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2175 }
2176
2177 if (dev->tda9887_conf) {
2178 struct v4l2_priv_tun_config tda9887_cfg;
2179
2180 tda9887_cfg.tuner = TUNER_TDA9887;
2181 tda9887_cfg.priv = &dev->tda9887_conf;
2182
2183 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2184 }
2185
2186 if (dev->tuner_type == TUNER_XC2028) {
2187 struct v4l2_priv_tun_config xc2028_cfg;
2188 struct xc2028_ctrl ctl;
2189
2190 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2191 memset(&ctl, 0, sizeof(ctl));
2192
2193 em28xx_setup_xc3028(dev, &ctl);
2194
2195 xc2028_cfg.tuner = TUNER_XC2028;
2196 xc2028_cfg.priv = &ctl;
2197
2198 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2199 }
2200
2201 /* configure tuner */
2202 f.tuner = 0;
2203 f.type = V4L2_TUNER_ANALOG_TV;
2204 f.frequency = 9076; /* just a magic number */
2205 dev->ctl_freq = f.frequency;
2206 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2207 }
2208
2209 static int em28xx_hint_board(struct em28xx *dev)
2210 {
2211 int i;
2212
2213 /* HINT method: EEPROM
2214 *
2215 * This method works only for boards with eeprom.
2216 * Uses a hash of all eeprom bytes. The hash should be
2217 * unique for a vendor/tuner pair.
2218 * There are a high chance that tuners for different
2219 * video standards produce different hashes.
2220 */
2221 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2222 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2223 dev->model = em28xx_eeprom_hash[i].model;
2224 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2225
2226 em28xx_errdev("Your board has no unique USB ID.\n");
2227 em28xx_errdev("A hint were successfully done, "
2228 "based on eeprom hash.\n");
2229 em28xx_errdev("This method is not 100%% failproof.\n");
2230 em28xx_errdev("If the board were missdetected, "
2231 "please email this log to:\n");
2232 em28xx_errdev("\tV4L Mailing List "
2233 " <linux-media@vger.kernel.org>\n");
2234 em28xx_errdev("Board detected as %s\n",
2235 em28xx_boards[dev->model].name);
2236
2237 return 0;
2238 }
2239 }
2240
2241 /* HINT method: I2C attached devices
2242 *
2243 * This method works for all boards.
2244 * Uses a hash of i2c scanned devices.
2245 * Devices with the same i2c attached chips will
2246 * be considered equal.
2247 * This method is less precise than the eeprom one.
2248 */
2249
2250 /* user did not request i2c scanning => do it now */
2251 if (!dev->i2c_hash)
2252 em28xx_do_i2c_scan(dev);
2253
2254 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2255 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2256 dev->model = em28xx_i2c_hash[i].model;
2257 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2258 em28xx_errdev("Your board has no unique USB ID.\n");
2259 em28xx_errdev("A hint were successfully done, "
2260 "based on i2c devicelist hash.\n");
2261 em28xx_errdev("This method is not 100%% failproof.\n");
2262 em28xx_errdev("If the board were missdetected, "
2263 "please email this log to:\n");
2264 em28xx_errdev("\tV4L Mailing List "
2265 " <linux-media@vger.kernel.org>\n");
2266 em28xx_errdev("Board detected as %s\n",
2267 em28xx_boards[dev->model].name);
2268
2269 return 0;
2270 }
2271 }
2272
2273 em28xx_errdev("Your board has no unique USB ID and thus need a "
2274 "hint to be detected.\n");
2275 em28xx_errdev("You may try to use card=<n> insmod option to "
2276 "workaround that.\n");
2277 em28xx_errdev("Please send an email with this log to:\n");
2278 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2279 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2280 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2281
2282 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2283 " insmod option:\n");
2284 for (i = 0; i < em28xx_bcount; i++) {
2285 em28xx_errdev(" card=%d -> %s\n",
2286 i, em28xx_boards[i].name);
2287 }
2288 return -1;
2289 }
2290
2291 /* ----------------------------------------------------------------------- */
2292 void em28xx_register_i2c_ir(struct em28xx *dev)
2293 {
2294 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
2295 /* at address 0x18, so if that address is needed for another board in */
2296 /* the future, please put it after 0x1f. */
2297 struct i2c_board_info info;
2298 const unsigned short addr_list[] = {
2299 0x1f, 0x30, 0x47, I2C_CLIENT_END
2300 };
2301
2302 if (disable_ir)
2303 return;
2304
2305 memset(&info, 0, sizeof(struct i2c_board_info));
2306 memset(&dev->init_data, 0, sizeof(dev->init_data));
2307 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2308
2309 /* detect & configure */
2310 switch (dev->model) {
2311 case EM2800_BOARD_TERRATEC_CINERGY_200:
2312 case EM2820_BOARD_TERRATEC_CINERGY_250:
2313 dev->init_data.ir_codes = &ir_codes_em_terratec_table;
2314 dev->init_data.get_key = em28xx_get_key_terratec;
2315 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2316 break;
2317 case EM2820_BOARD_PINNACLE_USB_2:
2318 dev->init_data.ir_codes = &ir_codes_pinnacle_grey_table;
2319 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2320 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2321 break;
2322 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2323 dev->init_data.ir_codes = &ir_codes_rc5_hauppauge_new_table;
2324 dev->init_data.get_key = em28xx_get_key_em_haup;
2325 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2326 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
2327 dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;;
2328 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
2329 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
2330 break;
2331 }
2332
2333 if (dev->init_data.name)
2334 info.platform_data = &dev->init_data;
2335 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
2336 }
2337
2338 void em28xx_card_setup(struct em28xx *dev)
2339 {
2340 /*
2341 * If the device can be a webcam, seek for a sensor.
2342 * If sensor is not found, then it isn't a webcam.
2343 */
2344 if (dev->board.is_webcam) {
2345 if (em28xx_hint_sensor(dev) < 0)
2346 dev->board.is_webcam = 0;
2347 else
2348 dev->progressive = 1;
2349 } else
2350 em28xx_set_model(dev);
2351
2352 em28xx_info("Identified as %s (card=%d)\n",
2353 dev->board.name, dev->model);
2354
2355 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2356 if (em28xx_boards[dev->model].tuner_addr)
2357 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2358
2359 if (em28xx_boards[dev->model].tda9887_conf)
2360 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2361
2362 /* request some modules */
2363 switch (dev->model) {
2364 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2365 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2366 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2367 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2368 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2369 {
2370 struct tveeprom tv;
2371 #if defined(CONFIG_MODULES) && defined(MODULE)
2372 request_module("tveeprom");
2373 #endif
2374 /* Call first TVeeprom */
2375
2376 dev->i2c_client.addr = 0xa0 >> 1;
2377 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2378
2379 dev->tuner_type = tv.tuner_type;
2380
2381 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2382 dev->i2s_speed = 2048000;
2383 dev->board.has_msp34xx = 1;
2384 }
2385 break;
2386 }
2387 case EM2882_BOARD_KWORLD_ATSC_315U:
2388 em28xx_write_reg(dev, 0x0d, 0x42);
2389 msleep(10);
2390 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2391 msleep(10);
2392 break;
2393 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2394 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2395 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2396 break;
2397 case EM2820_BOARD_UNKNOWN:
2398 case EM2800_BOARD_UNKNOWN:
2399 /*
2400 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2401 *
2402 * This occurs because they share identical USB vendor and
2403 * product IDs.
2404 *
2405 * What we do here is look up the EEPROM hash of the K-WORLD
2406 * and if it is found then we decide that we do not have
2407 * a DIGIVOX and reset the device to the K-WORLD instead.
2408 *
2409 * This solution is only valid if they do not share eeprom
2410 * hash identities which has not been determined as yet.
2411 */
2412 case EM2880_BOARD_MSI_DIGIVOX_AD:
2413 if (!em28xx_hint_board(dev))
2414 em28xx_set_model(dev);
2415
2416 /* In cases where we had to use a board hint, the call to
2417 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2418 so make the call now so the analog GPIOs are set properly
2419 before probing the i2c bus. */
2420 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2421 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2422 break;
2423
2424 /*
2425 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2426 *
2427 * This occurs because they share identical USB vendor and
2428 * product IDs.
2429 *
2430 * What we do here is look up the EEPROM hash of the Dikom
2431 * and if it is found then we decide that we do not have
2432 * a Kworld and reset the device to the Dikom instead.
2433 *
2434 * This solution is only valid if they do not share eeprom
2435 * hash identities which has not been determined as yet.
2436 */
2437 case EM2882_BOARD_KWORLD_VS_DVBT:
2438 if (!em28xx_hint_board(dev))
2439 em28xx_set_model(dev);
2440
2441 /* In cases where we had to use a board hint, the call to
2442 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2443 so make the call now so the analog GPIOs are set properly
2444 before probing the i2c bus. */
2445 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2446 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2447 break;
2448 }
2449
2450 #if defined(CONFIG_MODULES) && defined(MODULE)
2451 if (dev->board.has_ir_i2c && !disable_ir)
2452 request_module("ir-kbd-i2c");
2453 #endif
2454 if (dev->board.has_snapshot_button)
2455 em28xx_register_snapshot_button(dev);
2456
2457 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2458 em28xx_errdev("\n\n");
2459 em28xx_errdev("The support for this board weren't "
2460 "valid yet.\n");
2461 em28xx_errdev("Please send a report of having this working\n");
2462 em28xx_errdev("not to V4L mailing list (and/or to other "
2463 "addresses)\n\n");
2464 }
2465
2466 /* Allow override tuner type by a module parameter */
2467 if (tuner >= 0)
2468 dev->tuner_type = tuner;
2469
2470 /* request some modules */
2471 if (dev->board.has_msp34xx)
2472 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2473 "msp3400", "msp3400", 0, msp3400_addrs);
2474
2475 if (dev->board.decoder == EM28XX_SAA711X)
2476 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2477 "saa7115", "saa7115_auto", 0, saa711x_addrs);
2478
2479 if (dev->board.decoder == EM28XX_TVP5150)
2480 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2481 "tvp5150", "tvp5150", 0, tvp5150_addrs);
2482
2483 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2484 struct v4l2_subdev *sd;
2485
2486 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2487 &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs);
2488 v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
2489 }
2490
2491
2492 if (dev->board.adecoder == EM28XX_TVAUDIO)
2493 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2494 "tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL);
2495
2496 if (dev->board.tuner_type != TUNER_ABSENT) {
2497 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2498
2499 if (dev->board.radio.type)
2500 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2501 "tuner", "tuner", dev->board.radio_addr, NULL);
2502
2503 if (has_demod)
2504 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2505 &dev->i2c_adap, "tuner", "tuner",
2506 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2507 if (dev->tuner_addr == 0) {
2508 enum v4l2_i2c_tuner_type type =
2509 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2510 struct v4l2_subdev *sd;
2511
2512 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2513 &dev->i2c_adap, "tuner", "tuner",
2514 0, v4l2_i2c_tuner_addrs(type));
2515
2516 if (sd)
2517 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2518 } else {
2519 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2520 "tuner", "tuner", dev->tuner_addr, NULL);
2521 }
2522 }
2523
2524 em28xx_tuner_setup(dev);
2525
2526 if(!disable_ir)
2527 em28xx_ir_init(dev);
2528 }
2529
2530
2531 #if defined(CONFIG_MODULES) && defined(MODULE)
2532 static void request_module_async(struct work_struct *work)
2533 {
2534 struct em28xx *dev = container_of(work,
2535 struct em28xx, request_module_wk);
2536
2537 if (dev->has_audio_class)
2538 request_module("snd-usb-audio");
2539 else if (dev->has_alsa_audio)
2540 request_module("em28xx-alsa");
2541
2542 if (dev->board.has_dvb)
2543 request_module("em28xx-dvb");
2544 }
2545
2546 static void request_modules(struct em28xx *dev)
2547 {
2548 INIT_WORK(&dev->request_module_wk, request_module_async);
2549 schedule_work(&dev->request_module_wk);
2550 }
2551 #else
2552 #define request_modules(dev)
2553 #endif /* CONFIG_MODULES */
2554
2555 /*
2556 * em28xx_realease_resources()
2557 * unregisters the v4l2,i2c and usb devices
2558 * called when the device gets disconected or at module unload
2559 */
2560 void em28xx_release_resources(struct em28xx *dev)
2561 {
2562 if (dev->sbutton_input_dev)
2563 em28xx_deregister_snapshot_button(dev);
2564
2565 if (dev->ir)
2566 em28xx_ir_fini(dev);
2567
2568 /*FIXME: I2C IR should be disconnected */
2569
2570 em28xx_release_analog_resources(dev);
2571
2572 em28xx_remove_from_devlist(dev);
2573
2574 em28xx_i2c_unregister(dev);
2575
2576 v4l2_device_unregister(&dev->v4l2_dev);
2577
2578 usb_put_dev(dev->udev);
2579
2580 /* Mark device as unused */
2581 em28xx_devused &= ~(1 << dev->devno);
2582 };
2583
2584 /*
2585 * em28xx_init_dev()
2586 * allocates and inits the device structs, registers i2c bus and v4l device
2587 */
2588 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2589 struct usb_interface *interface,
2590 int minor)
2591 {
2592 struct em28xx *dev = *devhandle;
2593 int retval;
2594 int errCode;
2595
2596 dev->udev = udev;
2597 mutex_init(&dev->ctrl_urb_lock);
2598 spin_lock_init(&dev->slock);
2599 init_waitqueue_head(&dev->open);
2600 init_waitqueue_head(&dev->wait_frame);
2601 init_waitqueue_head(&dev->wait_stream);
2602
2603 dev->em28xx_write_regs = em28xx_write_regs;
2604 dev->em28xx_read_reg = em28xx_read_reg;
2605 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2606 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2607 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2608 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2609
2610 em28xx_set_model(dev);
2611
2612 /* Set the default GPO/GPIO for legacy devices */
2613 dev->reg_gpo_num = EM2880_R04_GPO;
2614 dev->reg_gpio_num = EM28XX_R08_GPIO;
2615
2616 dev->wait_after_write = 5;
2617
2618 /* Based on the Chip ID, set the device configuration */
2619 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2620 if (retval > 0) {
2621 dev->chip_id = retval;
2622
2623 switch (dev->chip_id) {
2624 case CHIP_ID_EM2800:
2625 em28xx_info("chip ID is em2800\n");
2626 break;
2627 case CHIP_ID_EM2710:
2628 em28xx_info("chip ID is em2710\n");
2629 break;
2630 case CHIP_ID_EM2750:
2631 em28xx_info("chip ID is em2750\n");
2632 break;
2633 case CHIP_ID_EM2820:
2634 em28xx_info("chip ID is em2820 (or em2710)\n");
2635 break;
2636 case CHIP_ID_EM2840:
2637 em28xx_info("chip ID is em2840\n");
2638 break;
2639 case CHIP_ID_EM2860:
2640 em28xx_info("chip ID is em2860\n");
2641 break;
2642 case CHIP_ID_EM2870:
2643 em28xx_info("chip ID is em2870\n");
2644 dev->wait_after_write = 0;
2645 break;
2646 case CHIP_ID_EM2874:
2647 em28xx_info("chip ID is em2874\n");
2648 dev->reg_gpio_num = EM2874_R80_GPIO;
2649 dev->wait_after_write = 0;
2650 break;
2651 case CHIP_ID_EM2883:
2652 em28xx_info("chip ID is em2882/em2883\n");
2653 dev->wait_after_write = 0;
2654 break;
2655 default:
2656 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2657 }
2658 }
2659
2660 /* Prepopulate cached GPO register content */
2661 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2662 if (retval >= 0)
2663 dev->reg_gpo = retval;
2664
2665 em28xx_pre_card_setup(dev);
2666
2667 if (!dev->board.is_em2800) {
2668 /* Sets I2C speed to 100 KHz */
2669 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2670 if (retval < 0) {
2671 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2672 " retval [%d]\n",
2673 __func__, retval);
2674 return retval;
2675 }
2676 }
2677
2678 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2679 if (retval < 0) {
2680 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2681 return retval;
2682 }
2683
2684 /* register i2c bus */
2685 errCode = em28xx_i2c_register(dev);
2686 if (errCode < 0) {
2687 v4l2_device_unregister(&dev->v4l2_dev);
2688 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2689 __func__, errCode);
2690 return errCode;
2691 }
2692
2693 /*
2694 * Default format, used for tvp5150 or saa711x output formats
2695 */
2696 dev->vinmode = 0x10;
2697 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
2698 EM28XX_VINCTRL_CCIR656_ENABLE;
2699
2700 /* Do board specific init and eeprom reading */
2701 em28xx_card_setup(dev);
2702
2703 /* Configure audio */
2704 errCode = em28xx_audio_setup(dev);
2705 if (errCode < 0) {
2706 v4l2_device_unregister(&dev->v4l2_dev);
2707 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2708 __func__, errCode);
2709 }
2710
2711 /* wake i2c devices */
2712 em28xx_wake_i2c(dev);
2713
2714 /* init video dma queues */
2715 INIT_LIST_HEAD(&dev->vidq.active);
2716 INIT_LIST_HEAD(&dev->vidq.queued);
2717 INIT_LIST_HEAD(&dev->vbiq.active);
2718 INIT_LIST_HEAD(&dev->vbiq.queued);
2719
2720 if (dev->board.has_msp34xx) {
2721 /* Send a reset to other chips via gpio */
2722 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2723 if (errCode < 0) {
2724 em28xx_errdev("%s: em28xx_write_regs_req - "
2725 "msp34xx(1) failed! errCode [%d]\n",
2726 __func__, errCode);
2727 return errCode;
2728 }
2729 msleep(3);
2730
2731 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2732 if (errCode < 0) {
2733 em28xx_errdev("%s: em28xx_write_regs_req - "
2734 "msp34xx(2) failed! errCode [%d]\n",
2735 __func__, errCode);
2736 return errCode;
2737 }
2738 msleep(3);
2739 }
2740
2741 em28xx_add_into_devlist(dev);
2742
2743 retval = em28xx_register_analog_devices(dev);
2744 if (retval < 0) {
2745 em28xx_release_resources(dev);
2746 goto fail_reg_devices;
2747 }
2748
2749 em28xx_init_extension(dev);
2750
2751 /* Save some power by putting tuner to sleep */
2752 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
2753
2754 return 0;
2755
2756 fail_reg_devices:
2757 return retval;
2758 }
2759
2760 /*
2761 * em28xx_usb_probe()
2762 * checks for supported devices
2763 */
2764 static int em28xx_usb_probe(struct usb_interface *interface,
2765 const struct usb_device_id *id)
2766 {
2767 const struct usb_endpoint_descriptor *endpoint;
2768 struct usb_device *udev;
2769 struct usb_interface *uif;
2770 struct em28xx *dev = NULL;
2771 int retval;
2772 int i, nr, ifnum, isoc_pipe;
2773 char *speed;
2774 char descr[255] = "";
2775
2776 udev = usb_get_dev(interface_to_usbdev(interface));
2777 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2778
2779 /* Check to see next free device and mark as used */
2780 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2781 em28xx_devused |= 1<<nr;
2782
2783 /* Don't register audio interfaces */
2784 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2785 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2786 "interface %i, class %i\n",
2787 le16_to_cpu(udev->descriptor.idVendor),
2788 le16_to_cpu(udev->descriptor.idProduct),
2789 ifnum,
2790 interface->altsetting[0].desc.bInterfaceClass);
2791
2792 em28xx_devused &= ~(1<<nr);
2793 retval = -ENODEV;
2794 goto err;
2795 }
2796
2797 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2798
2799 /* check if the device has the iso in endpoint at the correct place */
2800 if (usb_endpoint_xfer_isoc(endpoint)
2801 &&
2802 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2803 /* It's a newer em2874/em2875 device */
2804 isoc_pipe = 0;
2805 } else {
2806 int check_interface = 1;
2807 isoc_pipe = 1;
2808 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2809 if (!usb_endpoint_xfer_isoc(endpoint))
2810 check_interface = 0;
2811
2812 if (usb_endpoint_dir_out(endpoint))
2813 check_interface = 0;
2814
2815 if (!check_interface) {
2816 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2817 "interface %i, class %i found.\n",
2818 le16_to_cpu(udev->descriptor.idVendor),
2819 le16_to_cpu(udev->descriptor.idProduct),
2820 ifnum,
2821 interface->altsetting[0].desc.bInterfaceClass);
2822
2823 em28xx_err(DRIVER_NAME " This is an anciliary "
2824 "interface not used by the driver\n");
2825
2826 em28xx_devused &= ~(1<<nr);
2827 retval = -ENODEV;
2828 goto err;
2829 }
2830 }
2831
2832 switch (udev->speed) {
2833 case USB_SPEED_LOW:
2834 speed = "1.5";
2835 break;
2836 case USB_SPEED_UNKNOWN:
2837 case USB_SPEED_FULL:
2838 speed = "12";
2839 break;
2840 case USB_SPEED_HIGH:
2841 speed = "480";
2842 break;
2843 default:
2844 speed = "unknown";
2845 }
2846
2847 if (udev->manufacturer)
2848 strlcpy(descr, udev->manufacturer, sizeof(descr));
2849
2850 if (udev->product) {
2851 if (*descr)
2852 strlcat(descr, " ", sizeof(descr));
2853 strlcat(descr, udev->product, sizeof(descr));
2854 }
2855 if (*descr)
2856 strlcat(descr, " ", sizeof(descr));
2857
2858 printk(DRIVER_NAME ": New device %s@ %s Mbps "
2859 "(%04x:%04x, interface %d, class %d)\n",
2860 descr,
2861 speed,
2862 le16_to_cpu(udev->descriptor.idVendor),
2863 le16_to_cpu(udev->descriptor.idProduct),
2864 ifnum,
2865 interface->altsetting->desc.bInterfaceNumber);
2866
2867 /*
2868 * Make sure we have 480 Mbps of bandwidth, otherwise things like
2869 * video stream wouldn't likely work, since 12 Mbps is generally
2870 * not enough even for most Digital TV streams.
2871 */
2872 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
2873 printk(DRIVER_NAME ": Device initialization failed.\n");
2874 printk(DRIVER_NAME ": Device must be connected to a high-speed"
2875 " USB 2.0 port.\n");
2876 em28xx_devused &= ~(1<<nr);
2877 retval = -ENODEV;
2878 goto err;
2879 }
2880
2881 if (nr >= EM28XX_MAXBOARDS) {
2882 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2883 EM28XX_MAXBOARDS);
2884 em28xx_devused &= ~(1<<nr);
2885 retval = -ENOMEM;
2886 goto err;
2887 }
2888
2889 /* allocate memory for our device state and initialize it */
2890 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2891 if (dev == NULL) {
2892 em28xx_err(DRIVER_NAME ": out of memory!\n");
2893 em28xx_devused &= ~(1<<nr);
2894 retval = -ENOMEM;
2895 goto err;
2896 }
2897
2898 snprintf(dev->name, 29, "em28xx #%d", nr);
2899 dev->devno = nr;
2900 dev->model = id->driver_info;
2901 dev->alt = -1;
2902
2903 /* Checks if audio is provided by some interface */
2904 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2905 uif = udev->config->interface[i];
2906 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2907 dev->has_audio_class = 1;
2908 break;
2909 }
2910 }
2911
2912 /* compute alternate max packet sizes */
2913 uif = udev->actconfig->interface[0];
2914
2915 dev->num_alt = uif->num_altsetting;
2916 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2917
2918 if (dev->alt_max_pkt_size == NULL) {
2919 em28xx_errdev("out of memory!\n");
2920 em28xx_devused &= ~(1<<nr);
2921 kfree(dev);
2922 retval = -ENOMEM;
2923 goto err;
2924 }
2925
2926 for (i = 0; i < dev->num_alt ; i++) {
2927 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2928 dev->alt_max_pkt_size[i] =
2929 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2930 }
2931
2932 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2933 dev->model = card[nr];
2934
2935 /* allocate device struct */
2936 mutex_init(&dev->lock);
2937 mutex_lock(&dev->lock);
2938 retval = em28xx_init_dev(&dev, udev, interface, nr);
2939 if (retval) {
2940 em28xx_devused &= ~(1<<dev->devno);
2941 mutex_unlock(&dev->lock);
2942 kfree(dev);
2943 goto err;
2944 }
2945
2946 /* save our data pointer in this interface device */
2947 usb_set_intfdata(interface, dev);
2948
2949 request_modules(dev);
2950
2951 /* Should be the last thing to do, to avoid newer udev's to
2952 open the device before fully initializing it
2953 */
2954 mutex_unlock(&dev->lock);
2955
2956 return 0;
2957
2958 err:
2959 return retval;
2960 }
2961
2962 /*
2963 * em28xx_usb_disconnect()
2964 * called when the device gets diconencted
2965 * video device will be unregistered on v4l2_close in case it is still open
2966 */
2967 static void em28xx_usb_disconnect(struct usb_interface *interface)
2968 {
2969 struct em28xx *dev;
2970
2971 dev = usb_get_intfdata(interface);
2972 usb_set_intfdata(interface, NULL);
2973
2974 if (!dev)
2975 return;
2976
2977 em28xx_info("disconnecting %s\n", dev->vdev->name);
2978
2979 /* wait until all current v4l2 io is finished then deallocate
2980 resources */
2981 mutex_lock(&dev->lock);
2982
2983 wake_up_interruptible_all(&dev->open);
2984
2985 v4l2_device_disconnect(&dev->v4l2_dev);
2986
2987 if (dev->users) {
2988 em28xx_warn
2989 ("device %s is open! Deregistration and memory "
2990 "deallocation are deferred on close.\n",
2991 video_device_node_name(dev->vdev));
2992
2993 dev->state |= DEV_MISCONFIGURED;
2994 em28xx_uninit_isoc(dev);
2995 dev->state |= DEV_DISCONNECTED;
2996 wake_up_interruptible(&dev->wait_frame);
2997 wake_up_interruptible(&dev->wait_stream);
2998 } else {
2999 dev->state |= DEV_DISCONNECTED;
3000 em28xx_release_resources(dev);
3001 }
3002
3003 em28xx_close_extension(dev);
3004
3005 mutex_unlock(&dev->lock);
3006
3007 if (!dev->users) {
3008 kfree(dev->alt_max_pkt_size);
3009 kfree(dev);
3010 }
3011 }
3012
3013 static struct usb_driver em28xx_usb_driver = {
3014 .name = "em28xx",
3015 .probe = em28xx_usb_probe,
3016 .disconnect = em28xx_usb_disconnect,
3017 .id_table = em28xx_id_table,
3018 };
3019
3020 static int __init em28xx_module_init(void)
3021 {
3022 int result;
3023
3024 /* register this driver with the USB subsystem */
3025 result = usb_register(&em28xx_usb_driver);
3026 if (result)
3027 em28xx_err(DRIVER_NAME
3028 " usb_register failed. Error number %d.\n", result);
3029
3030 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
3031
3032 return result;
3033 }
3034
3035 static void __exit em28xx_module_exit(void)
3036 {
3037 /* deregister this driver with the USB subsystem */
3038 usb_deregister(&em28xx_usb_driver);
3039 }
3040
3041 module_init(em28xx_module_init);
3042 module_exit(em28xx_module_exit);
Linux kernel - Deliverables
This page took 0.188218 seconds and 5 git commands to generate.