projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/usb.h>
31 #include <media/tuner.h>
32 #include <media/msp3400.h>
33 #include <media/saa7115.h>
34 #include <media/tvp5150.h>
35 #include <media/tvaudio.h>
36 #include <media/mt9v011.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <media/v4l2-chip-ident.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
64 static unsigned long em28xx_devused;
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 static void em28xx_pre_card_setup(struct em28xx *dev);
73
74 /*
75 * Reset sequences for analog/digital modes
76 */
77
78 /* Reset for the most [analog] boards */
79 static struct em28xx_reg_seq default_analog[] = {
80 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
81 { -1, -1, -1, -1},
82 };
83
84 /* Reset for the most [digital] boards */
85 static struct em28xx_reg_seq default_digital[] = {
86 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
87 { -1, -1, -1, -1},
88 };
89
90 /* Board Hauppauge WinTV HVR 900 analog */
91 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
92 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
93 {0x05, 0xff, 0x10, 10},
94 { -1, -1, -1, -1},
95 };
96
97 /* Board Hauppauge WinTV HVR 900 digital */
98 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
99 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
100 {EM2880_R04_GPO, 0x04, 0x0f, 10},
101 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
102 { -1, -1, -1, -1},
103 };
104
105 /* Board Hauppauge WinTV HVR 900 (R2) digital */
106 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
107 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
108 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
109 { -1, -1, -1, -1},
110 };
111
112 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
113 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
114 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
115 { -1, -1, -1, -1},
116 };
117
118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
119
120 /* Board - EM2870 Kworld 355u
121 Analog - No input analog */
122
123 /* Board - EM2882 Kworld 315U digital */
124 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
125 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
126 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
127 {EM2880_R04_GPO, 0x04, 0xff, 10},
128 {EM2880_R04_GPO, 0x0c, 0xff, 10},
129 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
130 { -1, -1, -1, -1},
131 };
132
133 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 {EM2880_R04_GPO, 0x08, 0xff, 10},
137 {EM2880_R04_GPO, 0x0c, 0xff, 10},
138 { -1, -1, -1, -1},
139 };
140
141 static struct em28xx_reg_seq kworld_330u_analog[] = {
142 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
143 {EM2880_R04_GPO, 0x00, 0xff, 10},
144 { -1, -1, -1, -1},
145 };
146
147 static struct em28xx_reg_seq kworld_330u_digital[] = {
148 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
149 {EM2880_R04_GPO, 0x08, 0xff, 10},
150 { -1, -1, -1, -1},
151 };
152
153 /* Evga inDtube
154 GPIO0 - Enable digital power (s5h1409) - low to enable
155 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
156 GPIO4 - xc3028 reset
157 GOP3 - s5h1409 reset
158 */
159 static struct em28xx_reg_seq evga_indtube_analog[] = {
160 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
161 { -1, -1, -1, -1},
162 };
163
164 static struct em28xx_reg_seq evga_indtube_digital[] = {
165 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
166 {EM2880_R04_GPO, 0x04, 0xff, 10},
167 {EM2880_R04_GPO, 0x0c, 0xff, 1},
168 { -1, -1, -1, -1},
169 };
170
171 /*
172 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
173 * EM_GPIO_0 - currently unknown
174 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
175 * EM_GPIO_2 - currently unknown
176 * EM_GPIO_3 - currently unknown
177 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
178 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
179 * EM_GPIO_6 - currently unknown
180 * EM_GPIO_7 - currently unknown
181 */
182 static struct em28xx_reg_seq kworld_a340_digital[] = {
183 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
184 { -1, -1, -1, -1},
185 };
186
187 /* Pinnacle Hybrid Pro eb1a:2881 */
188 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
189 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
190 { -1, -1, -1, -1},
191 };
192
193 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
194 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
195 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
196 {EM2880_R04_GPO, 0x0c, 0xff, 1},
197 { -1, -1, -1, -1},
198 };
199
200 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
201 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
202 {EM2880_R04_GPO, 0x00, 0xff, 10},
203 { -1, -1, -1, -1},
204 };
205
206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
207 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
208 {EM2880_R04_GPO, 0x08, 0xff, 10},
209 { -1, -1, -1, -1},
210 };
211
212 /* eb1a:2868 Reddo DVB-C USB TV Box
213 GPIO4 - CU1216L NIM
214 Other GPIOs seems to be don't care. */
215 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
218 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
219 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
220 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
221 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
222 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
223 {-1, -1, -1, -1},
224 };
225
226 /* Callback for the most boards */
227 static struct em28xx_reg_seq default_tuner_gpio[] = {
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
230 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
231 { -1, -1, -1, -1},
232 };
233
234 /* Mute/unmute */
235 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
236 {EM28XX_R08_GPIO, 5, 7, 10},
237 { -1, -1, -1, -1},
238 };
239
240 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
241 {EM28XX_R08_GPIO, 4, 7, 10},
242 { -1, -1, -1, -1},
243 };
244
245 static struct em28xx_reg_seq compro_mute_gpio[] = {
246 {EM28XX_R08_GPIO, 6, 7, 10},
247 { -1, -1, -1, -1},
248 };
249
250 /* Terratec AV350 */
251 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
252 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
253 { -1, -1, -1, -1},
254 };
255
256 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
257 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
258 { -1, -1, -1, -1},
259 };
260
261 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
262 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
263 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
264 { -1, -1, -1, -1},
265 };
266
267 static struct em28xx_reg_seq vc211a_enable[] = {
268 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
269 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
270 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
271 { -1, -1, -1, -1},
272 };
273
274 static struct em28xx_reg_seq dikom_dk300_digital[] = {
275 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
276 {EM2880_R04_GPO, 0x08, 0xff, 10},
277 { -1, -1, -1, -1},
278 };
279
280
281 /* Reset for the most [digital] boards */
282 static struct em28xx_reg_seq leadership_digital[] = {
283 {EM2874_R80_GPIO, 0x70, 0xff, 10},
284 { -1, -1, -1, -1},
285 };
286
287 static struct em28xx_reg_seq leadership_reset[] = {
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
290 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
291 { -1, -1, -1, -1},
292 };
293
294 /* 2013:024f PCTV nanoStick T2 290e
295 * GPIO_6 - demod reset
296 * GPIO_7 - LED
297 */
298 static struct em28xx_reg_seq pctv_290e[] = {
299 {EM2874_R80_GPIO, 0x00, 0xff, 80},
300 {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
301 {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
302 {-1, -1, -1, -1},
303 };
304
305 #if 0
306 static struct em28xx_reg_seq terratec_h5_gpio[] = {
307 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
308 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
309 {EM2874_R80_GPIO, 0xf2, 0xff, 50},
310 {EM2874_R80_GPIO, 0xf6, 0xff, 50},
311 { -1, -1, -1, -1},
312 };
313
314 static struct em28xx_reg_seq terratec_h5_digital[] = {
315 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
316 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
317 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
318 { -1, -1, -1, -1},
319 };
320 #endif
321
322 /* 2013:024f PCTV DVB-S2 Stick 460e
323 * GPIO_0 - POWER_ON
324 * GPIO_1 - BOOST
325 * GPIO_2 - VUV_LNB (red LED)
326 * GPIO_3 - EXT_12V
327 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
328 * GPIO_5 - INT_LNB
329 * GPIO_6 - RESET_DEM
330 * GPIO_7 - LED (green LED)
331 */
332 static struct em28xx_reg_seq pctv_460e[] = {
333 {EM2874_R80_GPIO, 0x01, 0xff, 50},
334 {0x0d, 0xff, 0xff, 50},
335 {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
336 {0x0d, 0x42, 0xff, 50},
337 {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
338 { -1, -1, -1, -1},
339 };
340
341 #if 0
342 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
343 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
344 {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
345 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
346 {EM2874_R80_GPIO, 0x4f, 0xff, 10},
347 { -1, -1, -1, -1},
348 };
349
350 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
351 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
352 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
353 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
354 { -1, -1, -1, -1},
355 };
356 #endif
357
358 /* 1b80:e425 MaxMedia UB425-TC
359 * GPIO_6 - demod reset, 0=active
360 * GPIO_7 - LED, 0=active
361 */
362 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
363 {EM2874_R80_GPIO, 0x83, 0xff, 100},
364 {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
365 {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
366 {-1, -1, -1, -1},
367 };
368
369 /* 2304:0242 PCTV QuatroStick (510e)
370 * GPIO_2: decoder reset, 0=active
371 * GPIO_4: decoder suspend, 0=active
372 * GPIO_6: demod reset, 0=active
373 * GPIO_7: LED, 1=active
374 */
375 static struct em28xx_reg_seq pctv_510e[] = {
376 {EM2874_R80_GPIO, 0x10, 0xff, 100},
377 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
378 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
379 { -1, -1, -1, -1},
380 };
381
382 /* 2013:0251 PCTV QuatroStick nano (520e)
383 * GPIO_2: decoder reset, 0=active
384 * GPIO_4: decoder suspend, 0=active
385 * GPIO_6: demod reset, 0=active
386 * GPIO_7: LED, 1=active
387 */
388 static struct em28xx_reg_seq pctv_520e[] = {
389 {EM2874_R80_GPIO, 0x10, 0xff, 100},
390 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
391 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
392 {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
393 { -1, -1, -1, -1},
394 };
395
396 /*
397 * Board definitions
398 */
399 struct em28xx_board em28xx_boards[] = {
400 [EM2750_BOARD_UNKNOWN] = {
401 .name = "EM2710/EM2750/EM2751 webcam grabber",
402 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
403 .tuner_type = TUNER_ABSENT,
404 .is_webcam = 1,
405 .input = { {
406 .type = EM28XX_VMUX_COMPOSITE1,
407 .vmux = 0,
408 .amux = EM28XX_AMUX_VIDEO,
409 .gpio = silvercrest_reg_seq,
410 } },
411 },
412 [EM2800_BOARD_UNKNOWN] = {
413 .name = "Unknown EM2800 video grabber",
414 .is_em2800 = 1,
415 .tda9887_conf = TDA9887_PRESENT,
416 .decoder = EM28XX_SAA711X,
417 .tuner_type = TUNER_ABSENT,
418 .input = { {
419 .type = EM28XX_VMUX_COMPOSITE1,
420 .vmux = SAA7115_COMPOSITE0,
421 .amux = EM28XX_AMUX_LINE_IN,
422 }, {
423 .type = EM28XX_VMUX_SVIDEO,
424 .vmux = SAA7115_SVIDEO3,
425 .amux = EM28XX_AMUX_LINE_IN,
426 } },
427 },
428 [EM2820_BOARD_UNKNOWN] = {
429 .name = "Unknown EM2750/28xx video grabber",
430 .tuner_type = TUNER_ABSENT,
431 .is_webcam = 1, /* To enable sensor probe */
432 },
433 [EM2750_BOARD_DLCW_130] = {
434 /* Beijing Huaqi Information Digital Technology Co., Ltd */
435 .name = "Huaqi DLCW-130",
436 .valid = EM28XX_BOARD_NOT_VALIDATED,
437 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
438 .tuner_type = TUNER_ABSENT,
439 .is_webcam = 1,
440 .input = { {
441 .type = EM28XX_VMUX_COMPOSITE1,
442 .vmux = 0,
443 .amux = EM28XX_AMUX_VIDEO,
444 } },
445 },
446 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
447 .name = "Kworld PVR TV 2800 RF",
448 .tuner_type = TUNER_TEMIC_PAL,
449 .tda9887_conf = TDA9887_PRESENT,
450 .decoder = EM28XX_SAA711X,
451 .input = { {
452 .type = EM28XX_VMUX_COMPOSITE1,
453 .vmux = SAA7115_COMPOSITE0,
454 .amux = EM28XX_AMUX_LINE_IN,
455 }, {
456 .type = EM28XX_VMUX_SVIDEO,
457 .vmux = SAA7115_SVIDEO3,
458 .amux = EM28XX_AMUX_LINE_IN,
459 } },
460 },
461 [EM2820_BOARD_GADMEI_TVR200] = {
462 .name = "Gadmei TVR200",
463 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
464 .tda9887_conf = TDA9887_PRESENT,
465 .decoder = EM28XX_SAA711X,
466 .input = { {
467 .type = EM28XX_VMUX_TELEVISION,
468 .vmux = SAA7115_COMPOSITE2,
469 .amux = EM28XX_AMUX_LINE_IN,
470 }, {
471 .type = EM28XX_VMUX_COMPOSITE1,
472 .vmux = SAA7115_COMPOSITE0,
473 .amux = EM28XX_AMUX_LINE_IN,
474 }, {
475 .type = EM28XX_VMUX_SVIDEO,
476 .vmux = SAA7115_SVIDEO3,
477 .amux = EM28XX_AMUX_LINE_IN,
478 } },
479 },
480 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
481 .name = "Terratec Cinergy 250 USB",
482 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
483 .has_ir_i2c = 1,
484 .tda9887_conf = TDA9887_PRESENT,
485 .decoder = EM28XX_SAA711X,
486 .input = { {
487 .type = EM28XX_VMUX_TELEVISION,
488 .vmux = SAA7115_COMPOSITE2,
489 .amux = EM28XX_AMUX_LINE_IN,
490 }, {
491 .type = EM28XX_VMUX_COMPOSITE1,
492 .vmux = SAA7115_COMPOSITE0,
493 .amux = EM28XX_AMUX_LINE_IN,
494 }, {
495 .type = EM28XX_VMUX_SVIDEO,
496 .vmux = SAA7115_SVIDEO3,
497 .amux = EM28XX_AMUX_LINE_IN,
498 } },
499 },
500 [EM2820_BOARD_PINNACLE_USB_2] = {
501 .name = "Pinnacle PCTV USB 2",
502 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
503 .has_ir_i2c = 1,
504 .tda9887_conf = TDA9887_PRESENT,
505 .decoder = EM28XX_SAA711X,
506 .input = { {
507 .type = EM28XX_VMUX_TELEVISION,
508 .vmux = SAA7115_COMPOSITE2,
509 .amux = EM28XX_AMUX_VIDEO,
510 }, {
511 .type = EM28XX_VMUX_COMPOSITE1,
512 .vmux = SAA7115_COMPOSITE0,
513 .amux = EM28XX_AMUX_LINE_IN,
514 }, {
515 .type = EM28XX_VMUX_SVIDEO,
516 .vmux = SAA7115_SVIDEO3,
517 .amux = EM28XX_AMUX_LINE_IN,
518 } },
519 },
520 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
521 .name = "Hauppauge WinTV USB 2",
522 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
523 .tda9887_conf = TDA9887_PRESENT |
524 TDA9887_PORT1_ACTIVE |
525 TDA9887_PORT2_ACTIVE,
526 .decoder = EM28XX_TVP5150,
527 .has_msp34xx = 1,
528 .has_ir_i2c = 1,
529 .input = { {
530 .type = EM28XX_VMUX_TELEVISION,
531 .vmux = TVP5150_COMPOSITE0,
532 .amux = MSP_INPUT_DEFAULT,
533 }, {
534 .type = EM28XX_VMUX_SVIDEO,
535 .vmux = TVP5150_SVIDEO,
536 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
537 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
538 } },
539 },
540 [EM2820_BOARD_DLINK_USB_TV] = {
541 .name = "D-Link DUB-T210 TV Tuner",
542 .valid = EM28XX_BOARD_NOT_VALIDATED,
543 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
544 .tda9887_conf = TDA9887_PRESENT,
545 .decoder = EM28XX_SAA711X,
546 .input = { {
547 .type = EM28XX_VMUX_TELEVISION,
548 .vmux = SAA7115_COMPOSITE2,
549 .amux = EM28XX_AMUX_LINE_IN,
550 }, {
551 .type = EM28XX_VMUX_COMPOSITE1,
552 .vmux = SAA7115_COMPOSITE0,
553 .amux = EM28XX_AMUX_LINE_IN,
554 }, {
555 .type = EM28XX_VMUX_SVIDEO,
556 .vmux = SAA7115_SVIDEO3,
557 .amux = EM28XX_AMUX_LINE_IN,
558 } },
559 },
560 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
561 .name = "Hercules Smart TV USB 2.0",
562 .valid = EM28XX_BOARD_NOT_VALIDATED,
563 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
564 .tda9887_conf = TDA9887_PRESENT,
565 .decoder = EM28XX_SAA711X,
566 .input = { {
567 .type = EM28XX_VMUX_TELEVISION,
568 .vmux = SAA7115_COMPOSITE2,
569 .amux = EM28XX_AMUX_LINE_IN,
570 }, {
571 .type = EM28XX_VMUX_COMPOSITE1,
572 .vmux = SAA7115_COMPOSITE0,
573 .amux = EM28XX_AMUX_LINE_IN,
574 }, {
575 .type = EM28XX_VMUX_SVIDEO,
576 .vmux = SAA7115_SVIDEO3,
577 .amux = EM28XX_AMUX_LINE_IN,
578 } },
579 },
580 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
581 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
582 .valid = EM28XX_BOARD_NOT_VALIDATED,
583 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
584 .tda9887_conf = TDA9887_PRESENT,
585 .decoder = EM28XX_SAA711X,
586 .input = { {
587 .type = EM28XX_VMUX_TELEVISION,
588 .vmux = SAA7115_COMPOSITE2,
589 .amux = EM28XX_AMUX_VIDEO,
590 }, {
591 .type = EM28XX_VMUX_COMPOSITE1,
592 .vmux = SAA7115_COMPOSITE0,
593 .amux = EM28XX_AMUX_LINE_IN,
594 }, {
595 .type = EM28XX_VMUX_SVIDEO,
596 .vmux = SAA7115_SVIDEO3,
597 .amux = EM28XX_AMUX_LINE_IN,
598 } },
599 },
600 [EM2820_BOARD_GADMEI_UTV310] = {
601 .name = "Gadmei UTV310",
602 .valid = EM28XX_BOARD_NOT_VALIDATED,
603 .tuner_type = TUNER_TNF_5335MF,
604 .tda9887_conf = TDA9887_PRESENT,
605 .decoder = EM28XX_SAA711X,
606 .input = { {
607 .type = EM28XX_VMUX_TELEVISION,
608 .vmux = SAA7115_COMPOSITE1,
609 .amux = EM28XX_AMUX_LINE_IN,
610 }, {
611 .type = EM28XX_VMUX_COMPOSITE1,
612 .vmux = SAA7115_COMPOSITE0,
613 .amux = EM28XX_AMUX_LINE_IN,
614 }, {
615 .type = EM28XX_VMUX_SVIDEO,
616 .vmux = SAA7115_SVIDEO3,
617 .amux = EM28XX_AMUX_LINE_IN,
618 } },
619 },
620 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
621 .name = "Leadtek Winfast USB II Deluxe",
622 .valid = EM28XX_BOARD_NOT_VALIDATED,
623 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
624 .has_ir_i2c = 1,
625 .tvaudio_addr = 0x58,
626 .tda9887_conf = TDA9887_PRESENT |
627 TDA9887_PORT2_ACTIVE |
628 TDA9887_QSS,
629 .decoder = EM28XX_SAA711X,
630 .adecoder = EM28XX_TVAUDIO,
631 .input = { {
632 .type = EM28XX_VMUX_TELEVISION,
633 .vmux = SAA7115_COMPOSITE4,
634 .amux = EM28XX_AMUX_AUX,
635 }, {
636 .type = EM28XX_VMUX_COMPOSITE1,
637 .vmux = SAA7115_COMPOSITE5,
638 .amux = EM28XX_AMUX_LINE_IN,
639 }, {
640 .type = EM28XX_VMUX_SVIDEO,
641 .vmux = SAA7115_SVIDEO3,
642 .amux = EM28XX_AMUX_LINE_IN,
643 } },
644 .radio = {
645 .type = EM28XX_RADIO,
646 .amux = EM28XX_AMUX_AUX,
647 }
648 },
649 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
650 .name = "Videology 20K14XUSB USB2.0",
651 .valid = EM28XX_BOARD_NOT_VALIDATED,
652 .tuner_type = TUNER_ABSENT,
653 .is_webcam = 1,
654 .input = { {
655 .type = EM28XX_VMUX_COMPOSITE1,
656 .vmux = 0,
657 .amux = EM28XX_AMUX_VIDEO,
658 } },
659 },
660 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
661 .name = "Silvercrest Webcam 1.3mpix",
662 .tuner_type = TUNER_ABSENT,
663 .is_webcam = 1,
664 .input = { {
665 .type = EM28XX_VMUX_COMPOSITE1,
666 .vmux = 0,
667 .amux = EM28XX_AMUX_VIDEO,
668 .gpio = silvercrest_reg_seq,
669 } },
670 },
671 [EM2821_BOARD_SUPERCOMP_USB_2] = {
672 .name = "Supercomp USB 2.0 TV",
673 .valid = EM28XX_BOARD_NOT_VALIDATED,
674 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
675 .tda9887_conf = TDA9887_PRESENT |
676 TDA9887_PORT1_ACTIVE |
677 TDA9887_PORT2_ACTIVE,
678 .decoder = EM28XX_SAA711X,
679 .input = { {
680 .type = EM28XX_VMUX_TELEVISION,
681 .vmux = SAA7115_COMPOSITE2,
682 .amux = EM28XX_AMUX_LINE_IN,
683 }, {
684 .type = EM28XX_VMUX_COMPOSITE1,
685 .vmux = SAA7115_COMPOSITE0,
686 .amux = EM28XX_AMUX_VIDEO,
687 }, {
688 .type = EM28XX_VMUX_SVIDEO,
689 .vmux = SAA7115_SVIDEO3,
690 .amux = EM28XX_AMUX_LINE_IN,
691 } },
692 },
693 [EM2821_BOARD_USBGEAR_VD204] = {
694 .name = "Usbgear VD204v9",
695 .valid = EM28XX_BOARD_NOT_VALIDATED,
696 .tuner_type = TUNER_ABSENT, /* Capture only device */
697 .decoder = EM28XX_SAA711X,
698 .input = { {
699 .type = EM28XX_VMUX_COMPOSITE1,
700 .vmux = SAA7115_COMPOSITE0,
701 .amux = EM28XX_AMUX_LINE_IN,
702 }, {
703 .type = EM28XX_VMUX_SVIDEO,
704 .vmux = SAA7115_SVIDEO3,
705 .amux = EM28XX_AMUX_LINE_IN,
706 } },
707 },
708 [EM2860_BOARD_NETGMBH_CAM] = {
709 /* Beijing Huaqi Information Digital Technology Co., Ltd */
710 .name = "NetGMBH Cam",
711 .valid = EM28XX_BOARD_NOT_VALIDATED,
712 .tuner_type = TUNER_ABSENT,
713 .is_webcam = 1,
714 .input = { {
715 .type = EM28XX_VMUX_COMPOSITE1,
716 .vmux = 0,
717 .amux = EM28XX_AMUX_VIDEO,
718 } },
719 },
720 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
721 .name = "Typhoon DVD Maker",
722 .decoder = EM28XX_SAA711X,
723 .tuner_type = TUNER_ABSENT, /* Capture only device */
724 .input = { {
725 .type = EM28XX_VMUX_COMPOSITE1,
726 .vmux = SAA7115_COMPOSITE0,
727 .amux = EM28XX_AMUX_LINE_IN,
728 }, {
729 .type = EM28XX_VMUX_SVIDEO,
730 .vmux = SAA7115_SVIDEO3,
731 .amux = EM28XX_AMUX_LINE_IN,
732 } },
733 },
734 [EM2860_BOARD_GADMEI_UTV330] = {
735 .name = "Gadmei UTV330",
736 .valid = EM28XX_BOARD_NOT_VALIDATED,
737 .tuner_type = TUNER_TNF_5335MF,
738 .tda9887_conf = TDA9887_PRESENT,
739 .decoder = EM28XX_SAA711X,
740 .input = { {
741 .type = EM28XX_VMUX_TELEVISION,
742 .vmux = SAA7115_COMPOSITE2,
743 .amux = EM28XX_AMUX_VIDEO,
744 }, {
745 .type = EM28XX_VMUX_COMPOSITE1,
746 .vmux = SAA7115_COMPOSITE0,
747 .amux = EM28XX_AMUX_LINE_IN,
748 }, {
749 .type = EM28XX_VMUX_SVIDEO,
750 .vmux = SAA7115_SVIDEO3,
751 .amux = EM28XX_AMUX_LINE_IN,
752 } },
753 },
754 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
755 .name = "Gadmei UTV330+",
756 .tuner_type = TUNER_TNF_5335MF,
757 .tda9887_conf = TDA9887_PRESENT,
758 .ir_codes = RC_MAP_GADMEI_RM008Z,
759 .decoder = EM28XX_SAA711X,
760 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
761 .input = { {
762 .type = EM28XX_VMUX_TELEVISION,
763 .vmux = SAA7115_COMPOSITE2,
764 .amux = EM28XX_AMUX_VIDEO,
765 }, {
766 .type = EM28XX_VMUX_COMPOSITE1,
767 .vmux = SAA7115_COMPOSITE0,
768 .amux = EM28XX_AMUX_LINE_IN,
769 }, {
770 .type = EM28XX_VMUX_SVIDEO,
771 .vmux = SAA7115_SVIDEO3,
772 .amux = EM28XX_AMUX_LINE_IN,
773 } },
774 },
775 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
776 .name = "Terratec Cinergy A Hybrid XS",
777 .valid = EM28XX_BOARD_NOT_VALIDATED,
778 .tuner_type = TUNER_XC2028,
779 .tuner_gpio = default_tuner_gpio,
780 .decoder = EM28XX_TVP5150,
781
782 .input = { {
783 .type = EM28XX_VMUX_TELEVISION,
784 .vmux = TVP5150_COMPOSITE0,
785 .amux = EM28XX_AMUX_VIDEO,
786 .gpio = hauppauge_wintv_hvr_900_analog,
787 }, {
788 .type = EM28XX_VMUX_COMPOSITE1,
789 .vmux = TVP5150_COMPOSITE1,
790 .amux = EM28XX_AMUX_LINE_IN,
791 .gpio = hauppauge_wintv_hvr_900_analog,
792 }, {
793 .type = EM28XX_VMUX_SVIDEO,
794 .vmux = TVP5150_SVIDEO,
795 .amux = EM28XX_AMUX_LINE_IN,
796 .gpio = hauppauge_wintv_hvr_900_analog,
797 } },
798 },
799 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
800 .name = "KWorld PVRTV 300U",
801 .valid = EM28XX_BOARD_NOT_VALIDATED,
802 .tuner_type = TUNER_XC2028,
803 .tuner_gpio = default_tuner_gpio,
804 .decoder = EM28XX_TVP5150,
805 .input = { {
806 .type = EM28XX_VMUX_TELEVISION,
807 .vmux = TVP5150_COMPOSITE0,
808 .amux = EM28XX_AMUX_VIDEO,
809 }, {
810 .type = EM28XX_VMUX_COMPOSITE1,
811 .vmux = TVP5150_COMPOSITE1,
812 .amux = EM28XX_AMUX_LINE_IN,
813 }, {
814 .type = EM28XX_VMUX_SVIDEO,
815 .vmux = TVP5150_SVIDEO,
816 .amux = EM28XX_AMUX_LINE_IN,
817 } },
818 },
819 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
820 .name = "Yakumo MovieMixer",
821 .tuner_type = TUNER_ABSENT, /* Capture only device */
822 .decoder = EM28XX_TVP5150,
823 .input = { {
824 .type = EM28XX_VMUX_TELEVISION,
825 .vmux = TVP5150_COMPOSITE0,
826 .amux = EM28XX_AMUX_VIDEO,
827 }, {
828 .type = EM28XX_VMUX_COMPOSITE1,
829 .vmux = TVP5150_COMPOSITE1,
830 .amux = EM28XX_AMUX_LINE_IN,
831 }, {
832 .type = EM28XX_VMUX_SVIDEO,
833 .vmux = TVP5150_SVIDEO,
834 .amux = EM28XX_AMUX_LINE_IN,
835 } },
836 },
837 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
838 .name = "EM2860/TVP5150 Reference Design",
839 .tuner_type = TUNER_ABSENT, /* Capture only device */
840 .decoder = EM28XX_TVP5150,
841 .input = { {
842 .type = EM28XX_VMUX_COMPOSITE1,
843 .vmux = TVP5150_COMPOSITE1,
844 .amux = EM28XX_AMUX_LINE_IN,
845 }, {
846 .type = EM28XX_VMUX_SVIDEO,
847 .vmux = TVP5150_SVIDEO,
848 .amux = EM28XX_AMUX_LINE_IN,
849 } },
850 },
851 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
852 .name = "Plextor ConvertX PX-TV100U",
853 .tuner_type = TUNER_TNF_5335MF,
854 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
855 EM28XX_XCLK_FREQUENCY_12MHZ,
856 .tda9887_conf = TDA9887_PRESENT,
857 .decoder = EM28XX_TVP5150,
858 .has_msp34xx = 1,
859 .input = { {
860 .type = EM28XX_VMUX_TELEVISION,
861 .vmux = TVP5150_COMPOSITE0,
862 .amux = EM28XX_AMUX_LINE_IN,
863 .gpio = pinnacle_hybrid_pro_analog,
864 }, {
865 .type = EM28XX_VMUX_COMPOSITE1,
866 .vmux = TVP5150_COMPOSITE1,
867 .amux = EM28XX_AMUX_LINE_IN,
868 .gpio = pinnacle_hybrid_pro_analog,
869 }, {
870 .type = EM28XX_VMUX_SVIDEO,
871 .vmux = TVP5150_SVIDEO,
872 .amux = EM28XX_AMUX_LINE_IN,
873 .gpio = pinnacle_hybrid_pro_analog,
874 } },
875 },
876
877 /* Those boards with em2870 are DVB Only*/
878
879 [EM2870_BOARD_TERRATEC_XS] = {
880 .name = "Terratec Cinergy T XS",
881 .valid = EM28XX_BOARD_NOT_VALIDATED,
882 .tuner_type = TUNER_XC2028,
883 .tuner_gpio = default_tuner_gpio,
884 },
885 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
886 .name = "Terratec Cinergy T XS (MT2060)",
887 .valid = EM28XX_BOARD_NOT_VALIDATED,
888 .tuner_type = TUNER_ABSENT, /* MT2060 */
889 },
890 [EM2870_BOARD_KWORLD_350U] = {
891 .name = "Kworld 350 U DVB-T",
892 .valid = EM28XX_BOARD_NOT_VALIDATED,
893 .tuner_type = TUNER_XC2028,
894 .tuner_gpio = default_tuner_gpio,
895 },
896 [EM2870_BOARD_KWORLD_355U] = {
897 .name = "Kworld 355 U DVB-T",
898 .valid = EM28XX_BOARD_NOT_VALIDATED,
899 .tuner_type = TUNER_ABSENT,
900 .tuner_gpio = default_tuner_gpio,
901 .has_dvb = 1,
902 .dvb_gpio = default_digital,
903 },
904 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
905 .name = "Pinnacle PCTV DVB-T",
906 .valid = EM28XX_BOARD_NOT_VALIDATED,
907 .tuner_type = TUNER_ABSENT, /* MT2060 */
908 /* djh - I have serious doubts this is right... */
909 .xclk = EM28XX_XCLK_IR_RC5_MODE |
910 EM28XX_XCLK_FREQUENCY_10MHZ,
911 },
912 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
913 .name = "Compro, VideoMate U3",
914 .valid = EM28XX_BOARD_NOT_VALIDATED,
915 .tuner_type = TUNER_ABSENT, /* MT2060 */
916 },
917
918 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
919 .name = "Terratec Hybrid XS Secam",
920 .has_msp34xx = 1,
921 .tuner_type = TUNER_XC2028,
922 .tuner_gpio = default_tuner_gpio,
923 .decoder = EM28XX_TVP5150,
924 .has_dvb = 1,
925 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
926 .input = { {
927 .type = EM28XX_VMUX_TELEVISION,
928 .vmux = TVP5150_COMPOSITE0,
929 .amux = EM28XX_AMUX_VIDEO,
930 .gpio = terratec_cinergy_USB_XS_FR_analog,
931 }, {
932 .type = EM28XX_VMUX_COMPOSITE1,
933 .vmux = TVP5150_COMPOSITE1,
934 .amux = EM28XX_AMUX_LINE_IN,
935 .gpio = terratec_cinergy_USB_XS_FR_analog,
936 }, {
937 .type = EM28XX_VMUX_SVIDEO,
938 .vmux = TVP5150_SVIDEO,
939 .amux = EM28XX_AMUX_LINE_IN,
940 .gpio = terratec_cinergy_USB_XS_FR_analog,
941 } },
942 },
943 [EM2884_BOARD_TERRATEC_H5] = {
944 .name = "Terratec Cinergy H5",
945 .has_dvb = 1,
946 #if 0
947 .tuner_type = TUNER_PHILIPS_TDA8290,
948 .tuner_addr = 0x41,
949 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
950 .tuner_gpio = terratec_h5_gpio,
951 #else
952 .tuner_type = TUNER_ABSENT,
953 #endif
954 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
955 EM28XX_I2C_CLK_WAIT_ENABLE |
956 EM28XX_I2C_FREQ_400_KHZ,
957 },
958 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
959 .name = "Hauppauge WinTV HVR 930C",
960 .has_dvb = 1,
961 #if 0 /* FIXME: Add analog support */
962 .tuner_type = TUNER_XC5000,
963 .tuner_addr = 0x41,
964 .dvb_gpio = hauppauge_930c_digital,
965 .tuner_gpio = hauppauge_930c_gpio,
966 #else
967 .tuner_type = TUNER_ABSENT,
968 #endif
969 .ir_codes = RC_MAP_HAUPPAUGE,
970 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
971 EM28XX_I2C_CLK_WAIT_ENABLE |
972 EM28XX_I2C_FREQ_400_KHZ,
973 },
974 [EM2884_BOARD_CINERGY_HTC_STICK] = {
975 .name = "Terratec Cinergy HTC Stick",
976 .has_dvb = 1,
977 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
978 #if 0
979 .tuner_type = TUNER_PHILIPS_TDA8290,
980 .tuner_addr = 0x41,
981 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
982 .tuner_gpio = terratec_h5_gpio,
983 #endif
984 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
985 EM28XX_I2C_CLK_WAIT_ENABLE |
986 EM28XX_I2C_FREQ_400_KHZ,
987 },
988 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
989 .name = "Hauppauge WinTV HVR 900",
990 .tda9887_conf = TDA9887_PRESENT,
991 .tuner_type = TUNER_XC2028,
992 .tuner_gpio = default_tuner_gpio,
993 .mts_firmware = 1,
994 .has_dvb = 1,
995 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
996 .ir_codes = RC_MAP_HAUPPAUGE,
997 .decoder = EM28XX_TVP5150,
998 .input = { {
999 .type = EM28XX_VMUX_TELEVISION,
1000 .vmux = TVP5150_COMPOSITE0,
1001 .amux = EM28XX_AMUX_VIDEO,
1002 .gpio = hauppauge_wintv_hvr_900_analog,
1003 }, {
1004 .type = EM28XX_VMUX_COMPOSITE1,
1005 .vmux = TVP5150_COMPOSITE1,
1006 .amux = EM28XX_AMUX_LINE_IN,
1007 .gpio = hauppauge_wintv_hvr_900_analog,
1008 }, {
1009 .type = EM28XX_VMUX_SVIDEO,
1010 .vmux = TVP5150_SVIDEO,
1011 .amux = EM28XX_AMUX_LINE_IN,
1012 .gpio = hauppauge_wintv_hvr_900_analog,
1013 } },
1014 },
1015 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1016 .name = "Hauppauge WinTV HVR 900 (R2)",
1017 .tda9887_conf = TDA9887_PRESENT,
1018 .tuner_type = TUNER_XC2028,
1019 .tuner_gpio = default_tuner_gpio,
1020 .mts_firmware = 1,
1021 .has_dvb = 1,
1022 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1023 .ir_codes = RC_MAP_HAUPPAUGE,
1024 .decoder = EM28XX_TVP5150,
1025 .input = { {
1026 .type = EM28XX_VMUX_TELEVISION,
1027 .vmux = TVP5150_COMPOSITE0,
1028 .amux = EM28XX_AMUX_VIDEO,
1029 .gpio = hauppauge_wintv_hvr_900_analog,
1030 }, {
1031 .type = EM28XX_VMUX_COMPOSITE1,
1032 .vmux = TVP5150_COMPOSITE1,
1033 .amux = EM28XX_AMUX_LINE_IN,
1034 .gpio = hauppauge_wintv_hvr_900_analog,
1035 }, {
1036 .type = EM28XX_VMUX_SVIDEO,
1037 .vmux = TVP5150_SVIDEO,
1038 .amux = EM28XX_AMUX_LINE_IN,
1039 .gpio = hauppauge_wintv_hvr_900_analog,
1040 } },
1041 },
1042 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1043 .name = "Hauppauge WinTV HVR 850",
1044 .tuner_type = TUNER_XC2028,
1045 .tuner_gpio = default_tuner_gpio,
1046 .mts_firmware = 1,
1047 .has_dvb = 1,
1048 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1049 .ir_codes = RC_MAP_HAUPPAUGE,
1050 .decoder = EM28XX_TVP5150,
1051 .input = { {
1052 .type = EM28XX_VMUX_TELEVISION,
1053 .vmux = TVP5150_COMPOSITE0,
1054 .amux = EM28XX_AMUX_VIDEO,
1055 .gpio = hauppauge_wintv_hvr_900_analog,
1056 }, {
1057 .type = EM28XX_VMUX_COMPOSITE1,
1058 .vmux = TVP5150_COMPOSITE1,
1059 .amux = EM28XX_AMUX_LINE_IN,
1060 .gpio = hauppauge_wintv_hvr_900_analog,
1061 }, {
1062 .type = EM28XX_VMUX_SVIDEO,
1063 .vmux = TVP5150_SVIDEO,
1064 .amux = EM28XX_AMUX_LINE_IN,
1065 .gpio = hauppauge_wintv_hvr_900_analog,
1066 } },
1067 },
1068 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1069 .name = "Hauppauge WinTV HVR 950",
1070 .tuner_type = TUNER_XC2028,
1071 .tuner_gpio = default_tuner_gpio,
1072 .mts_firmware = 1,
1073 .has_dvb = 1,
1074 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1075 .ir_codes = RC_MAP_HAUPPAUGE,
1076 .decoder = EM28XX_TVP5150,
1077 .input = { {
1078 .type = EM28XX_VMUX_TELEVISION,
1079 .vmux = TVP5150_COMPOSITE0,
1080 .amux = EM28XX_AMUX_VIDEO,
1081 .gpio = hauppauge_wintv_hvr_900_analog,
1082 }, {
1083 .type = EM28XX_VMUX_COMPOSITE1,
1084 .vmux = TVP5150_COMPOSITE1,
1085 .amux = EM28XX_AMUX_LINE_IN,
1086 .gpio = hauppauge_wintv_hvr_900_analog,
1087 }, {
1088 .type = EM28XX_VMUX_SVIDEO,
1089 .vmux = TVP5150_SVIDEO,
1090 .amux = EM28XX_AMUX_LINE_IN,
1091 .gpio = hauppauge_wintv_hvr_900_analog,
1092 } },
1093 },
1094 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1095 .name = "Pinnacle PCTV HD Pro Stick",
1096 .tuner_type = TUNER_XC2028,
1097 .tuner_gpio = default_tuner_gpio,
1098 .mts_firmware = 1,
1099 .has_dvb = 1,
1100 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1101 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1102 .decoder = EM28XX_TVP5150,
1103 .input = { {
1104 .type = EM28XX_VMUX_TELEVISION,
1105 .vmux = TVP5150_COMPOSITE0,
1106 .amux = EM28XX_AMUX_VIDEO,
1107 .gpio = hauppauge_wintv_hvr_900_analog,
1108 }, {
1109 .type = EM28XX_VMUX_COMPOSITE1,
1110 .vmux = TVP5150_COMPOSITE1,
1111 .amux = EM28XX_AMUX_LINE_IN,
1112 .gpio = hauppauge_wintv_hvr_900_analog,
1113 }, {
1114 .type = EM28XX_VMUX_SVIDEO,
1115 .vmux = TVP5150_SVIDEO,
1116 .amux = EM28XX_AMUX_LINE_IN,
1117 .gpio = hauppauge_wintv_hvr_900_analog,
1118 } },
1119 },
1120 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1121 .name = "AMD ATI TV Wonder HD 600",
1122 .tuner_type = TUNER_XC2028,
1123 .tuner_gpio = default_tuner_gpio,
1124 .mts_firmware = 1,
1125 .has_dvb = 1,
1126 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1127 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1128 .decoder = EM28XX_TVP5150,
1129 .input = { {
1130 .type = EM28XX_VMUX_TELEVISION,
1131 .vmux = TVP5150_COMPOSITE0,
1132 .amux = EM28XX_AMUX_VIDEO,
1133 .gpio = hauppauge_wintv_hvr_900_analog,
1134 }, {
1135 .type = EM28XX_VMUX_COMPOSITE1,
1136 .vmux = TVP5150_COMPOSITE1,
1137 .amux = EM28XX_AMUX_LINE_IN,
1138 .gpio = hauppauge_wintv_hvr_900_analog,
1139 }, {
1140 .type = EM28XX_VMUX_SVIDEO,
1141 .vmux = TVP5150_SVIDEO,
1142 .amux = EM28XX_AMUX_LINE_IN,
1143 .gpio = hauppauge_wintv_hvr_900_analog,
1144 } },
1145 },
1146 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1147 .name = "Terratec Hybrid XS",
1148 .tuner_type = TUNER_XC2028,
1149 .tuner_gpio = default_tuner_gpio,
1150 .decoder = EM28XX_TVP5150,
1151 .has_dvb = 1,
1152 .dvb_gpio = default_digital,
1153 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1154 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1155 .input = { {
1156 .type = EM28XX_VMUX_TELEVISION,
1157 .vmux = TVP5150_COMPOSITE0,
1158 .amux = EM28XX_AMUX_VIDEO,
1159 .gpio = default_analog,
1160 }, {
1161 .type = EM28XX_VMUX_COMPOSITE1,
1162 .vmux = TVP5150_COMPOSITE1,
1163 .amux = EM28XX_AMUX_LINE_IN,
1164 .gpio = default_analog,
1165 }, {
1166 .type = EM28XX_VMUX_SVIDEO,
1167 .vmux = TVP5150_SVIDEO,
1168 .amux = EM28XX_AMUX_LINE_IN,
1169 .gpio = default_analog,
1170 } },
1171 },
1172 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1173 as Prodigy XS with a different PID, let's keep it separated for now
1174 maybe we'll need it lateron */
1175 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1176 .name = "Terratec Prodigy XS",
1177 .tuner_type = TUNER_XC2028,
1178 .tuner_gpio = default_tuner_gpio,
1179 .decoder = EM28XX_TVP5150,
1180 .input = { {
1181 .type = EM28XX_VMUX_TELEVISION,
1182 .vmux = TVP5150_COMPOSITE0,
1183 .amux = EM28XX_AMUX_VIDEO,
1184 .gpio = hauppauge_wintv_hvr_900_analog,
1185 }, {
1186 .type = EM28XX_VMUX_COMPOSITE1,
1187 .vmux = TVP5150_COMPOSITE1,
1188 .amux = EM28XX_AMUX_LINE_IN,
1189 .gpio = hauppauge_wintv_hvr_900_analog,
1190 }, {
1191 .type = EM28XX_VMUX_SVIDEO,
1192 .vmux = TVP5150_SVIDEO,
1193 .amux = EM28XX_AMUX_LINE_IN,
1194 .gpio = hauppauge_wintv_hvr_900_analog,
1195 } },
1196 },
1197 [EM2820_BOARD_MSI_VOX_USB_2] = {
1198 .name = "MSI VOX USB 2.0",
1199 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1200 .tda9887_conf = TDA9887_PRESENT |
1201 TDA9887_PORT1_ACTIVE |
1202 TDA9887_PORT2_ACTIVE,
1203 .max_range_640_480 = 1,
1204 .decoder = EM28XX_SAA711X,
1205 .input = { {
1206 .type = EM28XX_VMUX_TELEVISION,
1207 .vmux = SAA7115_COMPOSITE4,
1208 .amux = EM28XX_AMUX_VIDEO,
1209 }, {
1210 .type = EM28XX_VMUX_COMPOSITE1,
1211 .vmux = SAA7115_COMPOSITE0,
1212 .amux = EM28XX_AMUX_LINE_IN,
1213 }, {
1214 .type = EM28XX_VMUX_SVIDEO,
1215 .vmux = SAA7115_SVIDEO3,
1216 .amux = EM28XX_AMUX_LINE_IN,
1217 } },
1218 },
1219 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1220 .name = "Terratec Cinergy 200 USB",
1221 .is_em2800 = 1,
1222 .has_ir_i2c = 1,
1223 .tuner_type = TUNER_LG_TALN,
1224 .tda9887_conf = TDA9887_PRESENT,
1225 .decoder = EM28XX_SAA711X,
1226 .input = { {
1227 .type = EM28XX_VMUX_TELEVISION,
1228 .vmux = SAA7115_COMPOSITE2,
1229 .amux = EM28XX_AMUX_VIDEO,
1230 }, {
1231 .type = EM28XX_VMUX_COMPOSITE1,
1232 .vmux = SAA7115_COMPOSITE0,
1233 .amux = EM28XX_AMUX_LINE_IN,
1234 }, {
1235 .type = EM28XX_VMUX_SVIDEO,
1236 .vmux = SAA7115_SVIDEO3,
1237 .amux = EM28XX_AMUX_LINE_IN,
1238 } },
1239 },
1240 [EM2800_BOARD_GRABBEEX_USB2800] = {
1241 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1242 .is_em2800 = 1,
1243 .decoder = EM28XX_SAA711X,
1244 .tuner_type = TUNER_ABSENT, /* capture only board */
1245 .input = { {
1246 .type = EM28XX_VMUX_COMPOSITE1,
1247 .vmux = SAA7115_COMPOSITE0,
1248 .amux = EM28XX_AMUX_LINE_IN,
1249 }, {
1250 .type = EM28XX_VMUX_SVIDEO,
1251 .vmux = SAA7115_SVIDEO3,
1252 .amux = EM28XX_AMUX_LINE_IN,
1253 } },
1254 },
1255 [EM2800_BOARD_VC211A] = {
1256 .name = "Actionmaster/LinXcel/Digitus VC211A",
1257 .is_em2800 = 1,
1258 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1259 .decoder = EM28XX_SAA711X,
1260 .input = { {
1261 .type = EM28XX_VMUX_COMPOSITE1,
1262 .vmux = SAA7115_COMPOSITE0,
1263 .amux = EM28XX_AMUX_LINE_IN,
1264 .gpio = vc211a_enable,
1265 }, {
1266 .type = EM28XX_VMUX_SVIDEO,
1267 .vmux = SAA7115_SVIDEO3,
1268 .amux = EM28XX_AMUX_LINE_IN,
1269 .gpio = vc211a_enable,
1270 } },
1271 },
1272 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1273 .name = "Leadtek Winfast USB II",
1274 .is_em2800 = 1,
1275 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1276 .tda9887_conf = TDA9887_PRESENT,
1277 .decoder = EM28XX_SAA711X,
1278 .input = { {
1279 .type = EM28XX_VMUX_TELEVISION,
1280 .vmux = SAA7115_COMPOSITE2,
1281 .amux = EM28XX_AMUX_VIDEO,
1282 }, {
1283 .type = EM28XX_VMUX_COMPOSITE1,
1284 .vmux = SAA7115_COMPOSITE0,
1285 .amux = EM28XX_AMUX_LINE_IN,
1286 }, {
1287 .type = EM28XX_VMUX_SVIDEO,
1288 .vmux = SAA7115_SVIDEO3,
1289 .amux = EM28XX_AMUX_LINE_IN,
1290 } },
1291 },
1292 [EM2800_BOARD_KWORLD_USB2800] = {
1293 .name = "Kworld USB2800",
1294 .is_em2800 = 1,
1295 .tuner_type = TUNER_PHILIPS_FCV1236D,
1296 .tda9887_conf = TDA9887_PRESENT,
1297 .decoder = EM28XX_SAA711X,
1298 .input = { {
1299 .type = EM28XX_VMUX_TELEVISION,
1300 .vmux = SAA7115_COMPOSITE2,
1301 .amux = EM28XX_AMUX_VIDEO,
1302 }, {
1303 .type = EM28XX_VMUX_COMPOSITE1,
1304 .vmux = SAA7115_COMPOSITE0,
1305 .amux = EM28XX_AMUX_LINE_IN,
1306 }, {
1307 .type = EM28XX_VMUX_SVIDEO,
1308 .vmux = SAA7115_SVIDEO3,
1309 .amux = EM28XX_AMUX_LINE_IN,
1310 } },
1311 },
1312 [EM2820_BOARD_PINNACLE_DVC_90] = {
1313 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1314 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1315 .tuner_type = TUNER_ABSENT, /* capture only board */
1316 .decoder = EM28XX_SAA711X,
1317 .input = { {
1318 .type = EM28XX_VMUX_COMPOSITE1,
1319 .vmux = SAA7115_COMPOSITE0,
1320 .amux = EM28XX_AMUX_LINE_IN,
1321 }, {
1322 .type = EM28XX_VMUX_SVIDEO,
1323 .vmux = SAA7115_SVIDEO3,
1324 .amux = EM28XX_AMUX_LINE_IN,
1325 } },
1326 },
1327 [EM2800_BOARD_VGEAR_POCKETTV] = {
1328 .name = "V-Gear PocketTV",
1329 .is_em2800 = 1,
1330 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1331 .tda9887_conf = TDA9887_PRESENT,
1332 .decoder = EM28XX_SAA711X,
1333 .input = { {
1334 .type = EM28XX_VMUX_TELEVISION,
1335 .vmux = SAA7115_COMPOSITE2,
1336 .amux = EM28XX_AMUX_VIDEO,
1337 }, {
1338 .type = EM28XX_VMUX_COMPOSITE1,
1339 .vmux = SAA7115_COMPOSITE0,
1340 .amux = EM28XX_AMUX_LINE_IN,
1341 }, {
1342 .type = EM28XX_VMUX_SVIDEO,
1343 .vmux = SAA7115_SVIDEO3,
1344 .amux = EM28XX_AMUX_LINE_IN,
1345 } },
1346 },
1347 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1348 .name = "Pixelview PlayTV Box 4 USB 2.0",
1349 .tda9887_conf = TDA9887_PRESENT,
1350 .tuner_type = TUNER_YMEC_TVF_5533MF,
1351 .decoder = EM28XX_SAA711X,
1352 .input = { {
1353 .type = EM28XX_VMUX_TELEVISION,
1354 .vmux = SAA7115_COMPOSITE2,
1355 .amux = EM28XX_AMUX_VIDEO,
1356 .aout = EM28XX_AOUT_MONO | /* I2S */
1357 EM28XX_AOUT_MASTER, /* Line out pin */
1358 }, {
1359 .type = EM28XX_VMUX_COMPOSITE1,
1360 .vmux = SAA7115_COMPOSITE0,
1361 .amux = EM28XX_AMUX_LINE_IN,
1362 }, {
1363 .type = EM28XX_VMUX_SVIDEO,
1364 .vmux = SAA7115_SVIDEO3,
1365 .amux = EM28XX_AMUX_LINE_IN,
1366 } },
1367 },
1368 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1369 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1370 .has_snapshot_button = 1,
1371 .tda9887_conf = TDA9887_PRESENT,
1372 .tuner_type = TUNER_YMEC_TVF_5533MF,
1373 .decoder = EM28XX_SAA711X,
1374 .input = { {
1375 .type = EM28XX_VMUX_TELEVISION,
1376 .vmux = SAA7115_COMPOSITE2,
1377 .amux = EM28XX_AMUX_VIDEO,
1378 .aout = EM28XX_AOUT_MONO | /* I2S */
1379 EM28XX_AOUT_MASTER, /* Line out pin */
1380 }, {
1381 .type = EM28XX_VMUX_COMPOSITE1,
1382 .vmux = SAA7115_COMPOSITE0,
1383 .amux = EM28XX_AMUX_LINE_IN,
1384 }, {
1385 .type = EM28XX_VMUX_SVIDEO,
1386 .vmux = SAA7115_SVIDEO3,
1387 .amux = EM28XX_AMUX_LINE_IN,
1388 } },
1389 },
1390 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1391 .name = "EM2860/SAA711X Reference Design",
1392 .has_snapshot_button = 1,
1393 .tuner_type = TUNER_ABSENT,
1394 .decoder = EM28XX_SAA711X,
1395 .input = { {
1396 .type = EM28XX_VMUX_SVIDEO,
1397 .vmux = SAA7115_SVIDEO3,
1398 }, {
1399 .type = EM28XX_VMUX_COMPOSITE1,
1400 .vmux = SAA7115_COMPOSITE0,
1401 } },
1402 },
1403
1404 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1405 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1406 EM28XX_I2C_CLK_WAIT_ENABLE |
1407 EM28XX_I2C_FREQ_100_KHZ,
1408 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1409 .name = "EM2874 Leadership ISDBT",
1410 .tuner_type = TUNER_ABSENT,
1411 .tuner_gpio = leadership_reset,
1412 .dvb_gpio = leadership_digital,
1413 .has_dvb = 1,
1414 },
1415
1416 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1417 .name = "MSI DigiVox A/D",
1418 .valid = EM28XX_BOARD_NOT_VALIDATED,
1419 .tuner_type = TUNER_XC2028,
1420 .tuner_gpio = default_tuner_gpio,
1421 .decoder = EM28XX_TVP5150,
1422 .input = { {
1423 .type = EM28XX_VMUX_TELEVISION,
1424 .vmux = TVP5150_COMPOSITE0,
1425 .amux = EM28XX_AMUX_VIDEO,
1426 .gpio = em2880_msi_digivox_ad_analog,
1427 }, {
1428 .type = EM28XX_VMUX_COMPOSITE1,
1429 .vmux = TVP5150_COMPOSITE1,
1430 .amux = EM28XX_AMUX_LINE_IN,
1431 .gpio = em2880_msi_digivox_ad_analog,
1432 }, {
1433 .type = EM28XX_VMUX_SVIDEO,
1434 .vmux = TVP5150_SVIDEO,
1435 .amux = EM28XX_AMUX_LINE_IN,
1436 .gpio = em2880_msi_digivox_ad_analog,
1437 } },
1438 },
1439 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1440 .name = "MSI DigiVox A/D II",
1441 .valid = EM28XX_BOARD_NOT_VALIDATED,
1442 .tuner_type = TUNER_XC2028,
1443 .tuner_gpio = default_tuner_gpio,
1444 .decoder = EM28XX_TVP5150,
1445 .input = { {
1446 .type = EM28XX_VMUX_TELEVISION,
1447 .vmux = TVP5150_COMPOSITE0,
1448 .amux = EM28XX_AMUX_VIDEO,
1449 .gpio = em2880_msi_digivox_ad_analog,
1450 }, {
1451 .type = EM28XX_VMUX_COMPOSITE1,
1452 .vmux = TVP5150_COMPOSITE1,
1453 .amux = EM28XX_AMUX_LINE_IN,
1454 .gpio = em2880_msi_digivox_ad_analog,
1455 }, {
1456 .type = EM28XX_VMUX_SVIDEO,
1457 .vmux = TVP5150_SVIDEO,
1458 .amux = EM28XX_AMUX_LINE_IN,
1459 .gpio = em2880_msi_digivox_ad_analog,
1460 } },
1461 },
1462 [EM2880_BOARD_KWORLD_DVB_305U] = {
1463 .name = "KWorld DVB-T 305U",
1464 .tuner_type = TUNER_XC2028,
1465 .tuner_gpio = default_tuner_gpio,
1466 .decoder = EM28XX_TVP5150,
1467 .input = { {
1468 .type = EM28XX_VMUX_TELEVISION,
1469 .vmux = TVP5150_COMPOSITE0,
1470 .amux = EM28XX_AMUX_VIDEO,
1471 }, {
1472 .type = EM28XX_VMUX_COMPOSITE1,
1473 .vmux = TVP5150_COMPOSITE1,
1474 .amux = EM28XX_AMUX_LINE_IN,
1475 }, {
1476 .type = EM28XX_VMUX_SVIDEO,
1477 .vmux = TVP5150_SVIDEO,
1478 .amux = EM28XX_AMUX_LINE_IN,
1479 } },
1480 },
1481 [EM2880_BOARD_KWORLD_DVB_310U] = {
1482 .name = "KWorld DVB-T 310U",
1483 .tuner_type = TUNER_XC2028,
1484 .tuner_gpio = default_tuner_gpio,
1485 .has_dvb = 1,
1486 .dvb_gpio = default_digital,
1487 .mts_firmware = 1,
1488 .decoder = EM28XX_TVP5150,
1489 .input = { {
1490 .type = EM28XX_VMUX_TELEVISION,
1491 .vmux = TVP5150_COMPOSITE0,
1492 .amux = EM28XX_AMUX_VIDEO,
1493 .gpio = default_analog,
1494 }, {
1495 .type = EM28XX_VMUX_COMPOSITE1,
1496 .vmux = TVP5150_COMPOSITE1,
1497 .amux = EM28XX_AMUX_LINE_IN,
1498 .gpio = default_analog,
1499 }, { /* S-video has not been tested yet */
1500 .type = EM28XX_VMUX_SVIDEO,
1501 .vmux = TVP5150_SVIDEO,
1502 .amux = EM28XX_AMUX_LINE_IN,
1503 .gpio = default_analog,
1504 } },
1505 },
1506 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1507 .name = "KWorld ATSC 315U HDTV TV Box",
1508 .valid = EM28XX_BOARD_NOT_VALIDATED,
1509 .tuner_type = TUNER_THOMSON_DTT761X,
1510 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1511 .tda9887_conf = TDA9887_PRESENT,
1512 .decoder = EM28XX_SAA711X,
1513 .has_dvb = 1,
1514 .dvb_gpio = em2882_kworld_315u_digital,
1515 .ir_codes = RC_MAP_KWORLD_315U,
1516 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1517 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1518 /* Analog mode - still not ready */
1519 /*.input = { {
1520 .type = EM28XX_VMUX_TELEVISION,
1521 .vmux = SAA7115_COMPOSITE2,
1522 .amux = EM28XX_AMUX_VIDEO,
1523 .gpio = em2882_kworld_315u_analog,
1524 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1525 }, {
1526 .type = EM28XX_VMUX_COMPOSITE1,
1527 .vmux = SAA7115_COMPOSITE0,
1528 .amux = EM28XX_AMUX_LINE_IN,
1529 .gpio = em2882_kworld_315u_analog1,
1530 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1531 }, {
1532 .type = EM28XX_VMUX_SVIDEO,
1533 .vmux = SAA7115_SVIDEO3,
1534 .amux = EM28XX_AMUX_LINE_IN,
1535 .gpio = em2882_kworld_315u_analog1,
1536 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1537 } }, */
1538 },
1539 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1540 .name = "Empire dual TV",
1541 .tuner_type = TUNER_XC2028,
1542 .tuner_gpio = default_tuner_gpio,
1543 .has_dvb = 1,
1544 .dvb_gpio = default_digital,
1545 .mts_firmware = 1,
1546 .decoder = EM28XX_TVP5150,
1547 .input = { {
1548 .type = EM28XX_VMUX_TELEVISION,
1549 .vmux = TVP5150_COMPOSITE0,
1550 .amux = EM28XX_AMUX_VIDEO,
1551 .gpio = default_analog,
1552 }, {
1553 .type = EM28XX_VMUX_COMPOSITE1,
1554 .vmux = TVP5150_COMPOSITE1,
1555 .amux = EM28XX_AMUX_LINE_IN,
1556 .gpio = default_analog,
1557 }, {
1558 .type = EM28XX_VMUX_SVIDEO,
1559 .vmux = TVP5150_SVIDEO,
1560 .amux = EM28XX_AMUX_LINE_IN,
1561 .gpio = default_analog,
1562 } },
1563 },
1564 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1565 .name = "DNT DA2 Hybrid",
1566 .valid = EM28XX_BOARD_NOT_VALIDATED,
1567 .tuner_type = TUNER_XC2028,
1568 .tuner_gpio = default_tuner_gpio,
1569 .decoder = EM28XX_TVP5150,
1570 .input = { {
1571 .type = EM28XX_VMUX_TELEVISION,
1572 .vmux = TVP5150_COMPOSITE0,
1573 .amux = EM28XX_AMUX_VIDEO,
1574 .gpio = default_analog,
1575 }, {
1576 .type = EM28XX_VMUX_COMPOSITE1,
1577 .vmux = TVP5150_COMPOSITE1,
1578 .amux = EM28XX_AMUX_LINE_IN,
1579 .gpio = default_analog,
1580 }, {
1581 .type = EM28XX_VMUX_SVIDEO,
1582 .vmux = TVP5150_SVIDEO,
1583 .amux = EM28XX_AMUX_LINE_IN,
1584 .gpio = default_analog,
1585 } },
1586 },
1587 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1588 .name = "Pinnacle Hybrid Pro",
1589 .tuner_type = TUNER_XC2028,
1590 .tuner_gpio = default_tuner_gpio,
1591 .decoder = EM28XX_TVP5150,
1592 .has_dvb = 1,
1593 .dvb_gpio = pinnacle_hybrid_pro_digital,
1594 .input = { {
1595 .type = EM28XX_VMUX_TELEVISION,
1596 .vmux = TVP5150_COMPOSITE0,
1597 .amux = EM28XX_AMUX_VIDEO,
1598 .gpio = pinnacle_hybrid_pro_analog,
1599 }, {
1600 .type = EM28XX_VMUX_COMPOSITE1,
1601 .vmux = TVP5150_COMPOSITE1,
1602 .amux = EM28XX_AMUX_LINE_IN,
1603 .gpio = pinnacle_hybrid_pro_analog,
1604 }, {
1605 .type = EM28XX_VMUX_SVIDEO,
1606 .vmux = TVP5150_SVIDEO,
1607 .amux = EM28XX_AMUX_LINE_IN,
1608 .gpio = pinnacle_hybrid_pro_analog,
1609 } },
1610 },
1611 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1612 .name = "Pinnacle Hybrid Pro (330e)",
1613 .tuner_type = TUNER_XC2028,
1614 .tuner_gpio = default_tuner_gpio,
1615 .mts_firmware = 1,
1616 .has_dvb = 1,
1617 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1618 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1619 .decoder = EM28XX_TVP5150,
1620 .input = { {
1621 .type = EM28XX_VMUX_TELEVISION,
1622 .vmux = TVP5150_COMPOSITE0,
1623 .amux = EM28XX_AMUX_VIDEO,
1624 .gpio = hauppauge_wintv_hvr_900_analog,
1625 }, {
1626 .type = EM28XX_VMUX_COMPOSITE1,
1627 .vmux = TVP5150_COMPOSITE1,
1628 .amux = EM28XX_AMUX_LINE_IN,
1629 .gpio = hauppauge_wintv_hvr_900_analog,
1630 }, {
1631 .type = EM28XX_VMUX_SVIDEO,
1632 .vmux = TVP5150_SVIDEO,
1633 .amux = EM28XX_AMUX_LINE_IN,
1634 .gpio = hauppauge_wintv_hvr_900_analog,
1635 } },
1636 },
1637 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1638 .name = "Kworld VS-DVB-T 323UR",
1639 .tuner_type = TUNER_XC2028,
1640 .tuner_gpio = default_tuner_gpio,
1641 .decoder = EM28XX_TVP5150,
1642 .mts_firmware = 1,
1643 .has_dvb = 1,
1644 .dvb_gpio = kworld_330u_digital,
1645 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1646 .ir_codes = RC_MAP_KWORLD_315U,
1647 .input = { {
1648 .type = EM28XX_VMUX_TELEVISION,
1649 .vmux = TVP5150_COMPOSITE0,
1650 .amux = EM28XX_AMUX_VIDEO,
1651 }, {
1652 .type = EM28XX_VMUX_COMPOSITE1,
1653 .vmux = TVP5150_COMPOSITE1,
1654 .amux = EM28XX_AMUX_LINE_IN,
1655 }, {
1656 .type = EM28XX_VMUX_SVIDEO,
1657 .vmux = TVP5150_SVIDEO,
1658 .amux = EM28XX_AMUX_LINE_IN,
1659 } },
1660 },
1661 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1662 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1663 .tuner_type = TUNER_XC2028,
1664 .tuner_gpio = default_tuner_gpio,
1665 .mts_firmware = 1,
1666 .decoder = EM28XX_TVP5150,
1667 .has_dvb = 1,
1668 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1669 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1670 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1671 .input = { {
1672 .type = EM28XX_VMUX_TELEVISION,
1673 .vmux = TVP5150_COMPOSITE0,
1674 .amux = EM28XX_AMUX_VIDEO,
1675 .gpio = hauppauge_wintv_hvr_900_analog,
1676 }, {
1677 .type = EM28XX_VMUX_COMPOSITE1,
1678 .vmux = TVP5150_COMPOSITE1,
1679 .amux = EM28XX_AMUX_LINE_IN,
1680 .gpio = hauppauge_wintv_hvr_900_analog,
1681 }, {
1682 .type = EM28XX_VMUX_SVIDEO,
1683 .vmux = TVP5150_SVIDEO,
1684 .amux = EM28XX_AMUX_LINE_IN,
1685 .gpio = hauppauge_wintv_hvr_900_analog,
1686 } },
1687 },
1688 [EM2882_BOARD_DIKOM_DK300] = {
1689 .name = "Dikom DK300",
1690 .tuner_type = TUNER_XC2028,
1691 .tuner_gpio = default_tuner_gpio,
1692 .decoder = EM28XX_TVP5150,
1693 .mts_firmware = 1,
1694 .has_dvb = 1,
1695 .dvb_gpio = dikom_dk300_digital,
1696 .input = { {
1697 .type = EM28XX_VMUX_TELEVISION,
1698 .vmux = TVP5150_COMPOSITE0,
1699 .amux = EM28XX_AMUX_VIDEO,
1700 .gpio = default_analog,
1701 } },
1702 },
1703 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1704 .name = "Kworld PlusTV HD Hybrid 330",
1705 .tuner_type = TUNER_XC2028,
1706 .tuner_gpio = default_tuner_gpio,
1707 .decoder = EM28XX_TVP5150,
1708 .mts_firmware = 1,
1709 .has_dvb = 1,
1710 .dvb_gpio = kworld_330u_digital,
1711 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1712 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1713 EM28XX_I2C_EEPROM_ON_BOARD |
1714 EM28XX_I2C_EEPROM_KEY_VALID,
1715 .input = { {
1716 .type = EM28XX_VMUX_TELEVISION,
1717 .vmux = TVP5150_COMPOSITE0,
1718 .amux = EM28XX_AMUX_VIDEO,
1719 .gpio = kworld_330u_analog,
1720 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1721 }, {
1722 .type = EM28XX_VMUX_COMPOSITE1,
1723 .vmux = TVP5150_COMPOSITE1,
1724 .amux = EM28XX_AMUX_LINE_IN,
1725 .gpio = kworld_330u_analog,
1726 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1727 }, {
1728 .type = EM28XX_VMUX_SVIDEO,
1729 .vmux = TVP5150_SVIDEO,
1730 .amux = EM28XX_AMUX_LINE_IN,
1731 .gpio = kworld_330u_analog,
1732 } },
1733 },
1734 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1735 .name = "Compro VideoMate ForYou/Stereo",
1736 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1737 .tvaudio_addr = 0xb0,
1738 .tda9887_conf = TDA9887_PRESENT,
1739 .decoder = EM28XX_TVP5150,
1740 .adecoder = EM28XX_TVAUDIO,
1741 .mute_gpio = compro_mute_gpio,
1742 .input = { {
1743 .type = EM28XX_VMUX_TELEVISION,
1744 .vmux = TVP5150_COMPOSITE0,
1745 .amux = EM28XX_AMUX_VIDEO,
1746 .gpio = compro_unmute_tv_gpio,
1747 }, {
1748 .type = EM28XX_VMUX_SVIDEO,
1749 .vmux = TVP5150_SVIDEO,
1750 .amux = EM28XX_AMUX_LINE_IN,
1751 .gpio = compro_unmute_svid_gpio,
1752 } },
1753 },
1754 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1755 .name = "Kaiomy TVnPC U2",
1756 .vchannels = 3,
1757 .tuner_type = TUNER_XC2028,
1758 .tuner_addr = 0x61,
1759 .mts_firmware = 1,
1760 .decoder = EM28XX_TVP5150,
1761 .tuner_gpio = default_tuner_gpio,
1762 .ir_codes = RC_MAP_KAIOMY,
1763 .input = { {
1764 .type = EM28XX_VMUX_TELEVISION,
1765 .vmux = TVP5150_COMPOSITE0,
1766 .amux = EM28XX_AMUX_VIDEO,
1767
1768 }, {
1769 .type = EM28XX_VMUX_COMPOSITE1,
1770 .vmux = TVP5150_COMPOSITE1,
1771 .amux = EM28XX_AMUX_LINE_IN,
1772 }, {
1773 .type = EM28XX_VMUX_SVIDEO,
1774 .vmux = TVP5150_SVIDEO,
1775 .amux = EM28XX_AMUX_LINE_IN,
1776 } },
1777 .radio = {
1778 .type = EM28XX_RADIO,
1779 .amux = EM28XX_AMUX_LINE_IN,
1780 }
1781 },
1782 [EM2860_BOARD_EASYCAP] = {
1783 .name = "Easy Cap Capture DC-60",
1784 .vchannels = 2,
1785 .tuner_type = TUNER_ABSENT,
1786 .decoder = EM28XX_SAA711X,
1787 .input = { {
1788 .type = EM28XX_VMUX_COMPOSITE1,
1789 .vmux = SAA7115_COMPOSITE0,
1790 .amux = EM28XX_AMUX_LINE_IN,
1791 }, {
1792 .type = EM28XX_VMUX_SVIDEO,
1793 .vmux = SAA7115_SVIDEO3,
1794 .amux = EM28XX_AMUX_LINE_IN,
1795 } },
1796 },
1797 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1798 .name = "IO-DATA GV-MVP/SZ",
1799 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1800 .tuner_gpio = default_tuner_gpio,
1801 .tda9887_conf = TDA9887_PRESENT,
1802 .decoder = EM28XX_TVP5150,
1803 .input = { {
1804 .type = EM28XX_VMUX_TELEVISION,
1805 .vmux = TVP5150_COMPOSITE0,
1806 .amux = EM28XX_AMUX_VIDEO,
1807 }, { /* Composite has not been tested yet */
1808 .type = EM28XX_VMUX_COMPOSITE1,
1809 .vmux = TVP5150_COMPOSITE1,
1810 .amux = EM28XX_AMUX_VIDEO,
1811 }, { /* S-video has not been tested yet */
1812 .type = EM28XX_VMUX_SVIDEO,
1813 .vmux = TVP5150_SVIDEO,
1814 .amux = EM28XX_AMUX_VIDEO,
1815 } },
1816 },
1817 [EM2860_BOARD_TERRATEC_GRABBY] = {
1818 .name = "Terratec Grabby",
1819 .vchannels = 2,
1820 .tuner_type = TUNER_ABSENT,
1821 .decoder = EM28XX_SAA711X,
1822 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1823 .input = { {
1824 .type = EM28XX_VMUX_COMPOSITE1,
1825 .vmux = SAA7115_COMPOSITE0,
1826 .amux = EM28XX_AMUX_LINE_IN,
1827 }, {
1828 .type = EM28XX_VMUX_SVIDEO,
1829 .vmux = SAA7115_SVIDEO3,
1830 .amux = EM28XX_AMUX_LINE_IN,
1831 } },
1832 },
1833 [EM2860_BOARD_TERRATEC_AV350] = {
1834 .name = "Terratec AV350",
1835 .vchannels = 2,
1836 .tuner_type = TUNER_ABSENT,
1837 .decoder = EM28XX_TVP5150,
1838 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1839 .mute_gpio = terratec_av350_mute_gpio,
1840 .input = { {
1841 .type = EM28XX_VMUX_COMPOSITE1,
1842 .vmux = TVP5150_COMPOSITE1,
1843 .amux = EM28XX_AUDIO_SRC_LINE,
1844 .gpio = terratec_av350_unmute_gpio,
1845
1846 }, {
1847 .type = EM28XX_VMUX_SVIDEO,
1848 .vmux = TVP5150_SVIDEO,
1849 .amux = EM28XX_AUDIO_SRC_LINE,
1850 .gpio = terratec_av350_unmute_gpio,
1851 } },
1852 },
1853
1854 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1855 .name = "Elgato Video Capture",
1856 .decoder = EM28XX_SAA711X,
1857 .tuner_type = TUNER_ABSENT, /* Capture only device */
1858 .input = { {
1859 .type = EM28XX_VMUX_COMPOSITE1,
1860 .vmux = SAA7115_COMPOSITE0,
1861 .amux = EM28XX_AMUX_LINE_IN,
1862 }, {
1863 .type = EM28XX_VMUX_SVIDEO,
1864 .vmux = SAA7115_SVIDEO3,
1865 .amux = EM28XX_AMUX_LINE_IN,
1866 } },
1867 },
1868
1869 [EM2882_BOARD_EVGA_INDTUBE] = {
1870 .name = "Evga inDtube",
1871 .tuner_type = TUNER_XC2028,
1872 .tuner_gpio = default_tuner_gpio,
1873 .decoder = EM28XX_TVP5150,
1874 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1875 .mts_firmware = 1,
1876 .has_dvb = 1,
1877 .dvb_gpio = evga_indtube_digital,
1878 .ir_codes = RC_MAP_EVGA_INDTUBE,
1879 .input = { {
1880 .type = EM28XX_VMUX_TELEVISION,
1881 .vmux = TVP5150_COMPOSITE0,
1882 .amux = EM28XX_AMUX_VIDEO,
1883 .gpio = evga_indtube_analog,
1884 }, {
1885 .type = EM28XX_VMUX_COMPOSITE1,
1886 .vmux = TVP5150_COMPOSITE1,
1887 .amux = EM28XX_AMUX_LINE_IN,
1888 .gpio = evga_indtube_analog,
1889 }, {
1890 .type = EM28XX_VMUX_SVIDEO,
1891 .vmux = TVP5150_SVIDEO,
1892 .amux = EM28XX_AMUX_LINE_IN,
1893 .gpio = evga_indtube_analog,
1894 } },
1895 },
1896 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1897 Infineon TUA6034) */
1898 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1899 .name = "Reddo DVB-C USB TV Box",
1900 .tuner_type = TUNER_ABSENT,
1901 .tuner_gpio = reddo_dvb_c_usb_box,
1902 .has_dvb = 1,
1903 },
1904 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1905 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1906 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1907 [EM2870_BOARD_KWORLD_A340] = {
1908 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1909 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1910 .has_dvb = 1,
1911 .dvb_gpio = kworld_a340_digital,
1912 .tuner_gpio = default_tuner_gpio,
1913 },
1914 /* 2013:024f PCTV nanoStick T2 290e.
1915 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1916 [EM28174_BOARD_PCTV_290E] = {
1917 .name = "PCTV nanoStick T2 290e",
1918 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1919 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1920 .tuner_type = TUNER_ABSENT,
1921 .tuner_gpio = pctv_290e,
1922 .has_dvb = 1,
1923 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1924 },
1925 /* 2013:024f PCTV DVB-S2 Stick 460e
1926 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1927 [EM28174_BOARD_PCTV_460E] = {
1928 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1929 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1930 .name = "PCTV DVB-S2 Stick (460e)",
1931 .tuner_type = TUNER_ABSENT,
1932 .tuner_gpio = pctv_460e,
1933 .has_dvb = 1,
1934 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1935 },
1936 /* eb1a:5006 Honestech VIDBOX NW03
1937 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1938 [EM2860_BOARD_HT_VIDBOX_NW03] = {
1939 .name = "Honestech Vidbox NW03",
1940 .tuner_type = TUNER_ABSENT,
1941 .decoder = EM28XX_SAA711X,
1942 .input = { {
1943 .type = EM28XX_VMUX_COMPOSITE1,
1944 .vmux = SAA7115_COMPOSITE0,
1945 .amux = EM28XX_AMUX_LINE_IN,
1946 }, {
1947 .type = EM28XX_VMUX_SVIDEO,
1948 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
1949 .amux = EM28XX_AMUX_LINE_IN,
1950 } },
1951 },
1952 /* 1b80:e425 MaxMedia UB425-TC
1953 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
1954 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
1955 .name = "MaxMedia UB425-TC",
1956 .tuner_type = TUNER_ABSENT,
1957 .tuner_gpio = maxmedia_ub425_tc,
1958 .has_dvb = 1,
1959 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1960 EM28XX_I2C_CLK_WAIT_ENABLE |
1961 EM28XX_I2C_FREQ_400_KHZ,
1962 },
1963 /* 2304:0242 PCTV QuatroStick (510e)
1964 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1965 [EM2884_BOARD_PCTV_510E] = {
1966 .name = "PCTV QuatroStick (510e)",
1967 .tuner_type = TUNER_ABSENT,
1968 .tuner_gpio = pctv_510e,
1969 .has_dvb = 1,
1970 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1971 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1972 EM28XX_I2C_CLK_WAIT_ENABLE |
1973 EM28XX_I2C_FREQ_400_KHZ,
1974 },
1975 /* 2013:0251 PCTV QuatroStick nano (520e)
1976 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1977 [EM2884_BOARD_PCTV_520E] = {
1978 .name = "PCTV QuatroStick nano (520e)",
1979 .tuner_type = TUNER_ABSENT,
1980 .tuner_gpio = pctv_520e,
1981 .has_dvb = 1,
1982 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1983 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1984 EM28XX_I2C_CLK_WAIT_ENABLE |
1985 EM28XX_I2C_FREQ_400_KHZ,
1986 },
1987 };
1988 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1989
1990 /* table of devices that work with this driver */
1991 struct usb_device_id em28xx_id_table[] = {
1992 { USB_DEVICE(0xeb1a, 0x2750),
1993 .driver_info = EM2750_BOARD_UNKNOWN },
1994 { USB_DEVICE(0xeb1a, 0x2751),
1995 .driver_info = EM2750_BOARD_UNKNOWN },
1996 { USB_DEVICE(0xeb1a, 0x2800),
1997 .driver_info = EM2800_BOARD_UNKNOWN },
1998 { USB_DEVICE(0xeb1a, 0x2710),
1999 .driver_info = EM2820_BOARD_UNKNOWN },
2000 { USB_DEVICE(0xeb1a, 0x2820),
2001 .driver_info = EM2820_BOARD_UNKNOWN },
2002 { USB_DEVICE(0xeb1a, 0x2821),
2003 .driver_info = EM2820_BOARD_UNKNOWN },
2004 { USB_DEVICE(0xeb1a, 0x2860),
2005 .driver_info = EM2820_BOARD_UNKNOWN },
2006 { USB_DEVICE(0xeb1a, 0x2861),
2007 .driver_info = EM2820_BOARD_UNKNOWN },
2008 { USB_DEVICE(0xeb1a, 0x2862),
2009 .driver_info = EM2820_BOARD_UNKNOWN },
2010 { USB_DEVICE(0xeb1a, 0x2863),
2011 .driver_info = EM2820_BOARD_UNKNOWN },
2012 { USB_DEVICE(0xeb1a, 0x2870),
2013 .driver_info = EM2820_BOARD_UNKNOWN },
2014 { USB_DEVICE(0xeb1a, 0x2881),
2015 .driver_info = EM2820_BOARD_UNKNOWN },
2016 { USB_DEVICE(0xeb1a, 0x2883),
2017 .driver_info = EM2820_BOARD_UNKNOWN },
2018 { USB_DEVICE(0xeb1a, 0x2868),
2019 .driver_info = EM2820_BOARD_UNKNOWN },
2020 { USB_DEVICE(0xeb1a, 0x2875),
2021 .driver_info = EM2820_BOARD_UNKNOWN },
2022 { USB_DEVICE(0xeb1a, 0xe300),
2023 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2024 { USB_DEVICE(0xeb1a, 0xe303),
2025 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2026 { USB_DEVICE(0xeb1a, 0xe305),
2027 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2028 { USB_DEVICE(0xeb1a, 0xe310),
2029 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2030 { USB_DEVICE(0xeb1a, 0xa313),
2031 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2032 { USB_DEVICE(0xeb1a, 0xa316),
2033 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2034 { USB_DEVICE(0xeb1a, 0xe320),
2035 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2036 { USB_DEVICE(0xeb1a, 0xe323),
2037 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2038 { USB_DEVICE(0xeb1a, 0xe350),
2039 .driver_info = EM2870_BOARD_KWORLD_350U },
2040 { USB_DEVICE(0xeb1a, 0xe355),
2041 .driver_info = EM2870_BOARD_KWORLD_355U },
2042 { USB_DEVICE(0xeb1a, 0x2801),
2043 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2044 { USB_DEVICE(0xeb1a, 0xe357),
2045 .driver_info = EM2870_BOARD_KWORLD_355U },
2046 { USB_DEVICE(0xeb1a, 0xe359),
2047 .driver_info = EM2870_BOARD_KWORLD_355U },
2048 { USB_DEVICE(0x1b80, 0xe302),
2049 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2050 { USB_DEVICE(0x1b80, 0xe304),
2051 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2052 { USB_DEVICE(0x0ccd, 0x0036),
2053 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2054 { USB_DEVICE(0x0ccd, 0x004c),
2055 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2056 { USB_DEVICE(0x0ccd, 0x004f),
2057 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2058 { USB_DEVICE(0x0ccd, 0x005e),
2059 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2060 { USB_DEVICE(0x0ccd, 0x0042),
2061 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2062 { USB_DEVICE(0x0ccd, 0x0043),
2063 .driver_info = EM2870_BOARD_TERRATEC_XS },
2064 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2065 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2066 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2067 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2068 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2069 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2070 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2071 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2072 { USB_DEVICE(0x0ccd, 0x0084),
2073 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2074 { USB_DEVICE(0x0ccd, 0x0096),
2075 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2076 { USB_DEVICE(0x0ccd, 0x10AF),
2077 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2078 { USB_DEVICE(0x0ccd, 0x00b2),
2079 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2080 { USB_DEVICE(0x0fd9, 0x0033),
2081 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2082 { USB_DEVICE(0x185b, 0x2870),
2083 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2084 { USB_DEVICE(0x185b, 0x2041),
2085 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2086 { USB_DEVICE(0x2040, 0x4200),
2087 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2088 { USB_DEVICE(0x2040, 0x4201),
2089 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2090 { USB_DEVICE(0x2040, 0x6500),
2091 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2092 { USB_DEVICE(0x2040, 0x6502),
2093 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2094 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2095 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2096 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2097 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2098 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2099 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2100 { USB_DEVICE(0x2040, 0x651f),
2101 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2102 { USB_DEVICE(0x0438, 0xb002),
2103 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2104 { USB_DEVICE(0x2001, 0xf112),
2105 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2106 { USB_DEVICE(0x2304, 0x0207),
2107 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2108 { USB_DEVICE(0x2304, 0x0208),
2109 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2110 { USB_DEVICE(0x2304, 0x021a),
2111 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2112 { USB_DEVICE(0x2304, 0x0226),
2113 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2114 { USB_DEVICE(0x2304, 0x0227),
2115 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2116 { USB_DEVICE(0x0413, 0x6023),
2117 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2118 { USB_DEVICE(0x093b, 0xa003),
2119 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2120 { USB_DEVICE(0x093b, 0xa005),
2121 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2122 { USB_DEVICE(0x04bb, 0x0515),
2123 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2124 { USB_DEVICE(0xeb1a, 0x50a6),
2125 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2126 { USB_DEVICE(0x1b80, 0xa340),
2127 .driver_info = EM2870_BOARD_KWORLD_A340 },
2128 { USB_DEVICE(0x2013, 0x024f),
2129 .driver_info = EM28174_BOARD_PCTV_290E },
2130 { USB_DEVICE(0x2013, 0x024c),
2131 .driver_info = EM28174_BOARD_PCTV_460E },
2132 { USB_DEVICE(0x2040, 0x1605),
2133 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2134 { USB_DEVICE(0xeb1a, 0x5006),
2135 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2136 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2137 .driver_info = EM2860_BOARD_EASYCAP },
2138 { USB_DEVICE(0x1b80, 0xe425),
2139 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2140 { USB_DEVICE(0x2304, 0x0242),
2141 .driver_info = EM2884_BOARD_PCTV_510E },
2142 { USB_DEVICE(0x2013, 0x0251),
2143 .driver_info = EM2884_BOARD_PCTV_520E },
2144 { },
2145 };
2146 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2147
2148 /*
2149 * EEPROM hash table for devices with generic USB IDs
2150 */
2151 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2152 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2153 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2154 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2155 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2156 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2157 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2158 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2159 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2160 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2161 };
2162
2163 /* I2C devicelist hash table for devices with generic USB IDs */
2164 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2165 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2166 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2167 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2168 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2169 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2170 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2171 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2172 };
2173
2174 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2175 static unsigned short saa711x_addrs[] = {
2176 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
2177 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
2178 I2C_CLIENT_END };
2179
2180 static unsigned short tvp5150_addrs[] = {
2181 0xb8 >> 1,
2182 0xba >> 1,
2183 I2C_CLIENT_END
2184 };
2185
2186 static unsigned short msp3400_addrs[] = {
2187 0x80 >> 1,
2188 0x88 >> 1,
2189 I2C_CLIENT_END
2190 };
2191
2192 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2193 {
2194 int rc = 0;
2195 struct em28xx *dev = ptr;
2196
2197 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2198 return 0;
2199
2200 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2201 return 0;
2202
2203 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2204
2205 return rc;
2206 }
2207 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2208
2209 static inline void em28xx_set_model(struct em28xx *dev)
2210 {
2211 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2212
2213 /* Those are the default values for the majority of boards
2214 Use those values if not specified otherwise at boards entry
2215 */
2216 if (!dev->board.xclk)
2217 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2218 EM28XX_XCLK_FREQUENCY_12MHZ;
2219
2220 if (!dev->board.i2c_speed)
2221 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2222 EM28XX_I2C_FREQ_100_KHZ;
2223 }
2224
2225
2226 /* FIXME: Should be replaced by a proper mt9m111 driver */
2227 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2228 {
2229 int i;
2230 unsigned char regs[][3] = {
2231 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
2232 { 0x0d, 0x00, 0x00, },
2233 { 0x0a, 0x00, 0x21, },
2234 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
2235 };
2236
2237 for (i = 0; i < ARRAY_SIZE(regs); i++)
2238 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2239
2240 return 0;
2241 }
2242
2243
2244 /* FIXME: Should be replaced by a proper mt9m001 driver */
2245 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2246 {
2247 int i;
2248 unsigned char regs[][3] = {
2249 { 0x0d, 0x00, 0x01, },
2250 { 0x0d, 0x00, 0x00, },
2251 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
2252 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
2253 { 0x20, 0x11, 0x00, },
2254 { 0x06, 0x00, 0x10, },
2255 { 0x2b, 0x00, 0x24, },
2256 { 0x2e, 0x00, 0x24, },
2257 { 0x35, 0x00, 0x24, },
2258 { 0x2d, 0x00, 0x20, },
2259 { 0x2c, 0x00, 0x20, },
2260 { 0x09, 0x0a, 0xd4, },
2261 { 0x35, 0x00, 0x57, },
2262 };
2263
2264 for (i = 0; i < ARRAY_SIZE(regs); i++)
2265 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2266
2267 return 0;
2268 }
2269
2270 /* HINT method: webcam I2C chips
2271 *
2272 * This method works for webcams with Micron sensors
2273 */
2274 static int em28xx_hint_sensor(struct em28xx *dev)
2275 {
2276 int rc;
2277 char *sensor_name;
2278 unsigned char cmd;
2279 __be16 version_be;
2280 u16 version;
2281
2282 /* Micron sensor detection */
2283 dev->i2c_client.addr = 0xba >> 1;
2284 cmd = 0;
2285 i2c_master_send(&dev->i2c_client, &cmd, 1);
2286 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2287 if (rc != 2)
2288 return -EINVAL;
2289
2290 version = be16_to_cpu(version_be);
2291 switch (version) {
2292 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2293 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2294 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2295 em28xx_set_model(dev);
2296
2297 sensor_name = "mt9v011";
2298 dev->em28xx_sensor = EM28XX_MT9V011;
2299 dev->sensor_xres = 640;
2300 dev->sensor_yres = 480;
2301 /*
2302 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2303 * the Silvercrest cam I have here for testing - for higher
2304 * resolutions, a high clock cause horizontal artifacts, so we
2305 * need to use a lower xclk frequency.
2306 * Yet, it would be possible to adjust xclk depending on the
2307 * desired resolution, since this affects directly the
2308 * frame rate.
2309 */
2310 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2311 dev->sensor_xtal = 4300000;
2312
2313 /* probably means GRGB 16 bit bayer */
2314 dev->vinmode = 0x0d;
2315 dev->vinctl = 0x00;
2316
2317 break;
2318
2319 case 0x143a: /* MT9M111 as found in the ECS G200 */
2320 dev->model = EM2750_BOARD_UNKNOWN;
2321 em28xx_set_model(dev);
2322
2323 sensor_name = "mt9m111";
2324 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2325 dev->em28xx_sensor = EM28XX_MT9M111;
2326 em28xx_initialize_mt9m111(dev);
2327 dev->sensor_xres = 640;
2328 dev->sensor_yres = 512;
2329
2330 dev->vinmode = 0x0a;
2331 dev->vinctl = 0x00;
2332
2333 break;
2334
2335 case 0x8431:
2336 dev->model = EM2750_BOARD_UNKNOWN;
2337 em28xx_set_model(dev);
2338
2339 sensor_name = "mt9m001";
2340 dev->em28xx_sensor = EM28XX_MT9M001;
2341 em28xx_initialize_mt9m001(dev);
2342 dev->sensor_xres = 1280;
2343 dev->sensor_yres = 1024;
2344
2345 /* probably means BGGR 16 bit bayer */
2346 dev->vinmode = 0x0c;
2347 dev->vinctl = 0x00;
2348
2349 break;
2350 default:
2351 printk("Unknown Micron Sensor 0x%04x\n", version);
2352 return -EINVAL;
2353 }
2354
2355 /* Setup webcam defaults */
2356 em28xx_pre_card_setup(dev);
2357
2358 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2359 sensor_name, em28xx_boards[dev->model].name);
2360
2361 return 0;
2362 }
2363
2364 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2365 * this won't work for boards with generic PCI IDs
2366 */
2367 static void em28xx_pre_card_setup(struct em28xx *dev)
2368 {
2369 /* Set the initial XCLK and I2C clock values based on the board
2370 definition */
2371 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2372 if (!dev->board.is_em2800)
2373 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2374 msleep(50);
2375
2376 /* request some modules */
2377 switch (dev->model) {
2378 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2379 /* Sets the msp34xx I2S speed */
2380 dev->i2s_speed = 2048000;
2381 break;
2382 case EM2861_BOARD_KWORLD_PVRTV_300U:
2383 case EM2880_BOARD_KWORLD_DVB_305U:
2384 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2385 msleep(10);
2386 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2387 msleep(10);
2388 break;
2389 case EM2870_BOARD_COMPRO_VIDEOMATE:
2390 /* TODO: someone can do some cleanup here...
2391 not everything's needed */
2392 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2393 msleep(10);
2394 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2395 msleep(10);
2396 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2397 mdelay(70);
2398 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2399 mdelay(70);
2400 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2401 mdelay(70);
2402 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2403 mdelay(70);
2404 break;
2405 case EM2870_BOARD_TERRATEC_XS_MT2060:
2406 /* this device needs some gpio writes to get the DVB-T
2407 demod work */
2408 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2409 mdelay(70);
2410 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2411 mdelay(70);
2412 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2413 mdelay(70);
2414 break;
2415 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2416 /* this device needs some gpio writes to get the
2417 DVB-T demod work */
2418 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2419 mdelay(70);
2420 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2421 mdelay(70);
2422 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2423 mdelay(70);
2424 break;
2425 case EM2820_BOARD_GADMEI_UTV310:
2426 case EM2820_BOARD_MSI_VOX_USB_2:
2427 /* enables audio for that devices */
2428 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2429 break;
2430
2431 case EM2882_BOARD_KWORLD_ATSC_315U:
2432 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2433 msleep(10);
2434 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2435 msleep(10);
2436 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2437 msleep(10);
2438 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2439 msleep(10);
2440 break;
2441
2442 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2443 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2444 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2445 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2446 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2447 msleep(10);
2448 em28xx_write_regs(dev, 0x08, "\xff", 1);
2449 msleep(10);
2450 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2451 msleep(10);
2452 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2453
2454 break;
2455 case EM2860_BOARD_EASYCAP:
2456 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2457 break;
2458
2459 case EM2820_BOARD_IODATA_GVMVP_SZ:
2460 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2461 msleep(70);
2462 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2463 msleep(10);
2464 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2465 msleep(70);
2466 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2467 msleep(70);
2468 break;
2469 }
2470
2471 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2472 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2473
2474 /* Unlock device */
2475 em28xx_set_mode(dev, EM28XX_SUSPEND);
2476 }
2477
2478 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2479 {
2480 memset(ctl, 0, sizeof(*ctl));
2481
2482 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2483 ctl->max_len = 64;
2484 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2485
2486 switch (dev->model) {
2487 case EM2880_BOARD_EMPIRE_DUAL_TV:
2488 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2489 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2490 ctl->demod = XC3028_FE_ZARLINK456;
2491 break;
2492 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2493 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2494 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2495 ctl->demod = XC3028_FE_ZARLINK456;
2496 break;
2497 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2498 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2499 ctl->demod = XC3028_FE_DEFAULT;
2500 break;
2501 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2502 ctl->demod = XC3028_FE_DEFAULT;
2503 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2504 break;
2505 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2506 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2507 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2508 /* FIXME: Better to specify the needed IF */
2509 ctl->demod = XC3028_FE_DEFAULT;
2510 break;
2511 case EM2883_BOARD_KWORLD_HYBRID_330U:
2512 case EM2882_BOARD_DIKOM_DK300:
2513 case EM2882_BOARD_KWORLD_VS_DVBT:
2514 ctl->demod = XC3028_FE_CHINA;
2515 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2516 break;
2517 case EM2882_BOARD_EVGA_INDTUBE:
2518 ctl->demod = XC3028_FE_CHINA;
2519 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2520 break;
2521 default:
2522 ctl->demod = XC3028_FE_OREN538;
2523 }
2524 }
2525
2526 static void em28xx_tuner_setup(struct em28xx *dev)
2527 {
2528 struct tuner_setup tun_setup;
2529 struct v4l2_frequency f;
2530
2531 if (dev->tuner_type == TUNER_ABSENT)
2532 return;
2533
2534 memset(&tun_setup, 0, sizeof(tun_setup));
2535
2536 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2537 tun_setup.tuner_callback = em28xx_tuner_callback;
2538
2539 if (dev->board.radio.type) {
2540 tun_setup.type = dev->board.radio.type;
2541 tun_setup.addr = dev->board.radio_addr;
2542
2543 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2544 }
2545
2546 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2547 tun_setup.type = dev->tuner_type;
2548 tun_setup.addr = dev->tuner_addr;
2549
2550 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2551 }
2552
2553 if (dev->tda9887_conf) {
2554 struct v4l2_priv_tun_config tda9887_cfg;
2555
2556 tda9887_cfg.tuner = TUNER_TDA9887;
2557 tda9887_cfg.priv = &dev->tda9887_conf;
2558
2559 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2560 }
2561
2562 if (dev->tuner_type == TUNER_XC2028) {
2563 struct v4l2_priv_tun_config xc2028_cfg;
2564 struct xc2028_ctrl ctl;
2565
2566 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2567 memset(&ctl, 0, sizeof(ctl));
2568
2569 em28xx_setup_xc3028(dev, &ctl);
2570
2571 xc2028_cfg.tuner = TUNER_XC2028;
2572 xc2028_cfg.priv = &ctl;
2573
2574 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2575 }
2576
2577 /* configure tuner */
2578 f.tuner = 0;
2579 f.type = V4L2_TUNER_ANALOG_TV;
2580 f.frequency = 9076; /* just a magic number */
2581 dev->ctl_freq = f.frequency;
2582 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2583 }
2584
2585 static int em28xx_hint_board(struct em28xx *dev)
2586 {
2587 int i;
2588
2589 /* HINT method: EEPROM
2590 *
2591 * This method works only for boards with eeprom.
2592 * Uses a hash of all eeprom bytes. The hash should be
2593 * unique for a vendor/tuner pair.
2594 * There are a high chance that tuners for different
2595 * video standards produce different hashes.
2596 */
2597 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2598 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2599 dev->model = em28xx_eeprom_hash[i].model;
2600 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2601
2602 em28xx_errdev("Your board has no unique USB ID.\n");
2603 em28xx_errdev("A hint were successfully done, "
2604 "based on eeprom hash.\n");
2605 em28xx_errdev("This method is not 100%% failproof.\n");
2606 em28xx_errdev("If the board were missdetected, "
2607 "please email this log to:\n");
2608 em28xx_errdev("\tV4L Mailing List "
2609 " <linux-media@vger.kernel.org>\n");
2610 em28xx_errdev("Board detected as %s\n",
2611 em28xx_boards[dev->model].name);
2612
2613 return 0;
2614 }
2615 }
2616
2617 /* HINT method: I2C attached devices
2618 *
2619 * This method works for all boards.
2620 * Uses a hash of i2c scanned devices.
2621 * Devices with the same i2c attached chips will
2622 * be considered equal.
2623 * This method is less precise than the eeprom one.
2624 */
2625
2626 /* user did not request i2c scanning => do it now */
2627 if (!dev->i2c_hash)
2628 em28xx_do_i2c_scan(dev);
2629
2630 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2631 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2632 dev->model = em28xx_i2c_hash[i].model;
2633 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2634 em28xx_errdev("Your board has no unique USB ID.\n");
2635 em28xx_errdev("A hint were successfully done, "
2636 "based on i2c devicelist hash.\n");
2637 em28xx_errdev("This method is not 100%% failproof.\n");
2638 em28xx_errdev("If the board were missdetected, "
2639 "please email this log to:\n");
2640 em28xx_errdev("\tV4L Mailing List "
2641 " <linux-media@vger.kernel.org>\n");
2642 em28xx_errdev("Board detected as %s\n",
2643 em28xx_boards[dev->model].name);
2644
2645 return 0;
2646 }
2647 }
2648
2649 em28xx_errdev("Your board has no unique USB ID and thus need a "
2650 "hint to be detected.\n");
2651 em28xx_errdev("You may try to use card=<n> insmod option to "
2652 "workaround that.\n");
2653 em28xx_errdev("Please send an email with this log to:\n");
2654 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2655 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2656 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2657
2658 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2659 " insmod option:\n");
2660 for (i = 0; i < em28xx_bcount; i++) {
2661 em28xx_errdev(" card=%d -> %s\n",
2662 i, em28xx_boards[i].name);
2663 }
2664 return -1;
2665 }
2666
2667 static void em28xx_card_setup(struct em28xx *dev)
2668 {
2669 /*
2670 * If the device can be a webcam, seek for a sensor.
2671 * If sensor is not found, then it isn't a webcam.
2672 */
2673 if (dev->board.is_webcam) {
2674 if (em28xx_hint_sensor(dev) < 0)
2675 dev->board.is_webcam = 0;
2676 else
2677 dev->progressive = 1;
2678 }
2679
2680 if (!dev->board.is_webcam) {
2681 switch (dev->model) {
2682 case EM2820_BOARD_UNKNOWN:
2683 case EM2800_BOARD_UNKNOWN:
2684 /*
2685 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2686 *
2687 * This occurs because they share identical USB vendor and
2688 * product IDs.
2689 *
2690 * What we do here is look up the EEPROM hash of the K-WORLD
2691 * and if it is found then we decide that we do not have
2692 * a DIGIVOX and reset the device to the K-WORLD instead.
2693 *
2694 * This solution is only valid if they do not share eeprom
2695 * hash identities which has not been determined as yet.
2696 */
2697 if (em28xx_hint_board(dev) < 0)
2698 em28xx_errdev("Board not discovered\n");
2699 else {
2700 em28xx_set_model(dev);
2701 em28xx_pre_card_setup(dev);
2702 }
2703 break;
2704 default:
2705 em28xx_set_model(dev);
2706 }
2707 }
2708
2709 em28xx_info("Identified as %s (card=%d)\n",
2710 dev->board.name, dev->model);
2711
2712 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2713 if (em28xx_boards[dev->model].tuner_addr)
2714 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2715
2716 if (em28xx_boards[dev->model].tda9887_conf)
2717 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2718
2719 /* request some modules */
2720 switch (dev->model) {
2721 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2722 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2723 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2724 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2725 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2726 {
2727 struct tveeprom tv;
2728 #if defined(CONFIG_MODULES) && defined(MODULE)
2729 request_module("tveeprom");
2730 #endif
2731 /* Call first TVeeprom */
2732
2733 dev->i2c_client.addr = 0xa0 >> 1;
2734 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2735
2736 dev->tuner_type = tv.tuner_type;
2737
2738 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2739 dev->i2s_speed = 2048000;
2740 dev->board.has_msp34xx = 1;
2741 }
2742 break;
2743 }
2744 case EM2882_BOARD_KWORLD_ATSC_315U:
2745 em28xx_write_reg(dev, 0x0d, 0x42);
2746 msleep(10);
2747 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2748 msleep(10);
2749 break;
2750 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2751 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2752 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2753 break;
2754 case EM2820_BOARD_UNKNOWN:
2755 case EM2800_BOARD_UNKNOWN:
2756 /*
2757 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2758 *
2759 * This occurs because they share identical USB vendor and
2760 * product IDs.
2761 *
2762 * What we do here is look up the EEPROM hash of the K-WORLD
2763 * and if it is found then we decide that we do not have
2764 * a DIGIVOX and reset the device to the K-WORLD instead.
2765 *
2766 * This solution is only valid if they do not share eeprom
2767 * hash identities which has not been determined as yet.
2768 */
2769 case EM2880_BOARD_MSI_DIGIVOX_AD:
2770 if (!em28xx_hint_board(dev))
2771 em28xx_set_model(dev);
2772
2773 /* In cases where we had to use a board hint, the call to
2774 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2775 so make the call now so the analog GPIOs are set properly
2776 before probing the i2c bus. */
2777 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2778 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2779 break;
2780
2781 /*
2782 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2783 *
2784 * This occurs because they share identical USB vendor and
2785 * product IDs.
2786 *
2787 * What we do here is look up the EEPROM hash of the Dikom
2788 * and if it is found then we decide that we do not have
2789 * a Kworld and reset the device to the Dikom instead.
2790 *
2791 * This solution is only valid if they do not share eeprom
2792 * hash identities which has not been determined as yet.
2793 */
2794 case EM2882_BOARD_KWORLD_VS_DVBT:
2795 if (!em28xx_hint_board(dev))
2796 em28xx_set_model(dev);
2797
2798 /* In cases where we had to use a board hint, the call to
2799 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2800 so make the call now so the analog GPIOs are set properly
2801 before probing the i2c bus. */
2802 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2803 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2804 break;
2805 }
2806
2807 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2808 em28xx_errdev("\n\n");
2809 em28xx_errdev("The support for this board weren't "
2810 "valid yet.\n");
2811 em28xx_errdev("Please send a report of having this working\n");
2812 em28xx_errdev("not to V4L mailing list (and/or to other "
2813 "addresses)\n\n");
2814 }
2815
2816 /* Allow override tuner type by a module parameter */
2817 if (tuner >= 0)
2818 dev->tuner_type = tuner;
2819
2820 /* request some modules */
2821 if (dev->board.has_msp34xx)
2822 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2823 "msp3400", 0, msp3400_addrs);
2824
2825 if (dev->board.decoder == EM28XX_SAA711X)
2826 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2827 "saa7115_auto", 0, saa711x_addrs);
2828
2829 if (dev->board.decoder == EM28XX_TVP5150)
2830 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2831 "tvp5150", 0, tvp5150_addrs);
2832
2833 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2834 struct mt9v011_platform_data pdata;
2835 struct i2c_board_info mt9v011_info = {
2836 .type = "mt9v011",
2837 .addr = 0xba >> 1,
2838 .platform_data = &pdata,
2839 };
2840
2841 pdata.xtal = dev->sensor_xtal;
2842 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2843 &mt9v011_info, NULL);
2844 }
2845
2846
2847 if (dev->board.adecoder == EM28XX_TVAUDIO)
2848 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2849 "tvaudio", dev->board.tvaudio_addr, NULL);
2850
2851 if (dev->board.tuner_type != TUNER_ABSENT) {
2852 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2853
2854 if (dev->board.radio.type)
2855 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2856 "tuner", dev->board.radio_addr, NULL);
2857
2858 if (has_demod)
2859 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2860 &dev->i2c_adap, "tuner",
2861 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2862 if (dev->tuner_addr == 0) {
2863 enum v4l2_i2c_tuner_type type =
2864 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2865 struct v4l2_subdev *sd;
2866
2867 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2868 &dev->i2c_adap, "tuner",
2869 0, v4l2_i2c_tuner_addrs(type));
2870
2871 if (sd)
2872 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2873 } else {
2874 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2875 "tuner", dev->tuner_addr, NULL);
2876 }
2877 }
2878
2879 em28xx_tuner_setup(dev);
2880 }
2881
2882
2883 #if defined(CONFIG_MODULES) && defined(MODULE)
2884 static void request_module_async(struct work_struct *work)
2885 {
2886 struct em28xx *dev = container_of(work,
2887 struct em28xx, request_module_wk);
2888
2889 if (dev->has_audio_class)
2890 request_module("snd-usb-audio");
2891 else if (dev->has_alsa_audio)
2892 request_module("em28xx-alsa");
2893
2894 if (dev->board.has_dvb)
2895 request_module("em28xx-dvb");
2896 if (dev->board.ir_codes && !disable_ir)
2897 request_module("em28xx-rc");
2898 }
2899
2900 static void request_modules(struct em28xx *dev)
2901 {
2902 INIT_WORK(&dev->request_module_wk, request_module_async);
2903 schedule_work(&dev->request_module_wk);
2904 }
2905
2906 static void flush_request_modules(struct em28xx *dev)
2907 {
2908 flush_work_sync(&dev->request_module_wk);
2909 }
2910 #else
2911 #define request_modules(dev)
2912 #define flush_request_modules(dev)
2913 #endif /* CONFIG_MODULES */
2914
2915 /*
2916 * em28xx_release_resources()
2917 * unregisters the v4l2,i2c and usb devices
2918 * called when the device gets disconnected or at module unload
2919 */
2920 void em28xx_release_resources(struct em28xx *dev)
2921 {
2922 /*FIXME: I2C IR should be disconnected */
2923
2924 em28xx_release_analog_resources(dev);
2925
2926 em28xx_i2c_unregister(dev);
2927
2928 v4l2_device_unregister(&dev->v4l2_dev);
2929
2930 usb_put_dev(dev->udev);
2931
2932 /* Mark device as unused */
2933 clear_bit(dev->devno, &em28xx_devused);
2934 };
2935
2936 /*
2937 * em28xx_init_dev()
2938 * allocates and inits the device structs, registers i2c bus and v4l device
2939 */
2940 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
2941 struct usb_interface *interface,
2942 int minor)
2943 {
2944 int retval;
2945
2946 dev->udev = udev;
2947 mutex_init(&dev->ctrl_urb_lock);
2948 spin_lock_init(&dev->slock);
2949
2950 dev->em28xx_write_regs = em28xx_write_regs;
2951 dev->em28xx_read_reg = em28xx_read_reg;
2952 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2953 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2954 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2955 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2956
2957 em28xx_set_model(dev);
2958
2959 /* Set the default GPO/GPIO for legacy devices */
2960 dev->reg_gpo_num = EM2880_R04_GPO;
2961 dev->reg_gpio_num = EM28XX_R08_GPIO;
2962
2963 dev->wait_after_write = 5;
2964
2965 /* Based on the Chip ID, set the device configuration */
2966 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2967 if (retval > 0) {
2968 dev->chip_id = retval;
2969
2970 switch (dev->chip_id) {
2971 case CHIP_ID_EM2800:
2972 em28xx_info("chip ID is em2800\n");
2973 break;
2974 case CHIP_ID_EM2710:
2975 em28xx_info("chip ID is em2710\n");
2976 break;
2977 case CHIP_ID_EM2750:
2978 em28xx_info("chip ID is em2750\n");
2979 break;
2980 case CHIP_ID_EM2820:
2981 em28xx_info("chip ID is em2820 (or em2710)\n");
2982 break;
2983 case CHIP_ID_EM2840:
2984 em28xx_info("chip ID is em2840\n");
2985 break;
2986 case CHIP_ID_EM2860:
2987 em28xx_info("chip ID is em2860\n");
2988 break;
2989 case CHIP_ID_EM2870:
2990 em28xx_info("chip ID is em2870\n");
2991 dev->wait_after_write = 0;
2992 break;
2993 case CHIP_ID_EM2874:
2994 em28xx_info("chip ID is em2874\n");
2995 dev->reg_gpio_num = EM2874_R80_GPIO;
2996 dev->wait_after_write = 0;
2997 break;
2998 case CHIP_ID_EM28174:
2999 em28xx_info("chip ID is em28174\n");
3000 dev->reg_gpio_num = EM2874_R80_GPIO;
3001 dev->wait_after_write = 0;
3002 break;
3003 case CHIP_ID_EM2883:
3004 em28xx_info("chip ID is em2882/em2883\n");
3005 dev->wait_after_write = 0;
3006 break;
3007 case CHIP_ID_EM2884:
3008 em28xx_info("chip ID is em2884\n");
3009 dev->reg_gpio_num = EM2874_R80_GPIO;
3010 dev->wait_after_write = 0;
3011 break;
3012 default:
3013 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
3014 }
3015 }
3016
3017 if (dev->is_audio_only) {
3018 retval = em28xx_audio_setup(dev);
3019 if (retval)
3020 return -ENODEV;
3021 em28xx_init_extension(dev);
3022
3023 return 0;
3024 }
3025
3026 /* Prepopulate cached GPO register content */
3027 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3028 if (retval >= 0)
3029 dev->reg_gpo = retval;
3030
3031 em28xx_pre_card_setup(dev);
3032
3033 if (!dev->board.is_em2800) {
3034 /* Resets I2C speed */
3035 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3036 if (retval < 0) {
3037 em28xx_errdev("%s: em28xx_write_reg failed!"
3038 " retval [%d]\n",
3039 __func__, retval);
3040 return retval;
3041 }
3042 }
3043
3044 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3045 if (retval < 0) {
3046 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3047 return retval;
3048 }
3049
3050 /* register i2c bus */
3051 retval = em28xx_i2c_register(dev);
3052 if (retval < 0) {
3053 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3054 __func__, retval);
3055 goto unregister_dev;
3056 }
3057
3058 /*
3059 * Default format, used for tvp5150 or saa711x output formats
3060 */
3061 dev->vinmode = 0x10;
3062 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
3063 EM28XX_VINCTRL_CCIR656_ENABLE;
3064
3065 /* Do board specific init and eeprom reading */
3066 em28xx_card_setup(dev);
3067
3068 /* Configure audio */
3069 retval = em28xx_audio_setup(dev);
3070 if (retval < 0) {
3071 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3072 __func__, retval);
3073 goto fail;
3074 }
3075
3076 /* wake i2c devices */
3077 em28xx_wake_i2c(dev);
3078
3079 /* init video dma queues */
3080 INIT_LIST_HEAD(&dev->vidq.active);
3081 INIT_LIST_HEAD(&dev->vbiq.active);
3082
3083 if (dev->board.has_msp34xx) {
3084 /* Send a reset to other chips via gpio */
3085 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3086 if (retval < 0) {
3087 em28xx_errdev("%s: em28xx_write_reg - "
3088 "msp34xx(1) failed! error [%d]\n",
3089 __func__, retval);
3090 goto fail;
3091 }
3092 msleep(3);
3093
3094 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3095 if (retval < 0) {
3096 em28xx_errdev("%s: em28xx_write_reg - "
3097 "msp34xx(2) failed! error [%d]\n",
3098 __func__, retval);
3099 goto fail;
3100 }
3101 msleep(3);
3102 }
3103
3104 retval = em28xx_register_analog_devices(dev);
3105 if (retval < 0) {
3106 goto fail;
3107 }
3108
3109 /* Save some power by putting tuner to sleep */
3110 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3111
3112 return 0;
3113
3114 fail:
3115 em28xx_i2c_unregister(dev);
3116
3117 unregister_dev:
3118 v4l2_device_unregister(&dev->v4l2_dev);
3119
3120 return retval;
3121 }
3122
3123 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3124 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3125
3126 /*
3127 * em28xx_usb_probe()
3128 * checks for supported devices
3129 */
3130 static int em28xx_usb_probe(struct usb_interface *interface,
3131 const struct usb_device_id *id)
3132 {
3133 struct usb_device *udev;
3134 struct em28xx *dev = NULL;
3135 int retval;
3136 bool has_audio = false, has_video = false, has_dvb = false;
3137 int i, nr;
3138 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3139 char *speed;
3140
3141 udev = usb_get_dev(interface_to_usbdev(interface));
3142
3143 /* Check to see next free device and mark as used */
3144 do {
3145 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3146 if (nr >= EM28XX_MAXBOARDS) {
3147 /* No free device slots */
3148 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3149 EM28XX_MAXBOARDS);
3150 retval = -ENOMEM;
3151 goto err_no_slot;
3152 }
3153 } while (test_and_set_bit(nr, &em28xx_devused));
3154
3155 /* Don't register audio interfaces */
3156 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3157 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3158 "interface %i, class %i\n",
3159 le16_to_cpu(udev->descriptor.idVendor),
3160 le16_to_cpu(udev->descriptor.idProduct),
3161 ifnum,
3162 interface->altsetting[0].desc.bInterfaceClass);
3163
3164 retval = -ENODEV;
3165 goto err;
3166 }
3167
3168 /* allocate memory for our device state and initialize it */
3169 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3170 if (dev == NULL) {
3171 em28xx_err(DRIVER_NAME ": out of memory!\n");
3172 retval = -ENOMEM;
3173 goto err;
3174 }
3175
3176 /* compute alternate max packet sizes */
3177 dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3178 interface->num_altsetting, GFP_KERNEL);
3179 if (dev->alt_max_pkt_size == NULL) {
3180 em28xx_errdev("out of memory!\n");
3181 kfree(dev);
3182 retval = -ENOMEM;
3183 goto err;
3184 }
3185
3186 /* Get endpoints */
3187 for (i = 0; i < interface->num_altsetting; i++) {
3188 int ep;
3189
3190 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3191 const struct usb_endpoint_descriptor *e;
3192 int sizedescr, size;
3193
3194 e = &interface->altsetting[i].endpoint[ep].desc;
3195
3196 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3197 size = sizedescr & 0x7ff;
3198
3199 if (udev->speed == USB_SPEED_HIGH)
3200 size = size * hb_mult(sizedescr);
3201
3202 if (usb_endpoint_xfer_isoc(e) &&
3203 usb_endpoint_dir_in(e)) {
3204 switch (e->bEndpointAddress) {
3205 case EM28XX_EP_AUDIO:
3206 has_audio = true;
3207 break;
3208 case EM28XX_EP_ANALOG:
3209 has_video = true;
3210 dev->alt_max_pkt_size[i] = size;
3211 break;
3212 case EM28XX_EP_DIGITAL:
3213 has_dvb = true;
3214 if (size > dev->dvb_max_pkt_size) {
3215 dev->dvb_max_pkt_size = size;
3216 dev->dvb_alt = i;
3217 }
3218 break;
3219 }
3220 }
3221 }
3222 }
3223
3224 if (!(has_audio || has_video || has_dvb)) {
3225 retval = -ENODEV;
3226 goto err_free;
3227 }
3228
3229 switch (udev->speed) {
3230 case USB_SPEED_LOW:
3231 speed = "1.5";
3232 break;
3233 case USB_SPEED_UNKNOWN:
3234 case USB_SPEED_FULL:
3235 speed = "12";
3236 break;
3237 case USB_SPEED_HIGH:
3238 speed = "480";
3239 break;
3240 default:
3241 speed = "unknown";
3242 }
3243
3244 printk(KERN_INFO DRIVER_NAME
3245 ": New device %s %s @ %s Mbps "
3246 "(%04x:%04x, interface %d, class %d)\n",
3247 udev->manufacturer ? udev->manufacturer : "",
3248 udev->product ? udev->product : "",
3249 speed,
3250 le16_to_cpu(udev->descriptor.idVendor),
3251 le16_to_cpu(udev->descriptor.idProduct),
3252 ifnum,
3253 interface->altsetting->desc.bInterfaceNumber);
3254
3255 if (has_audio)
3256 printk(KERN_INFO DRIVER_NAME
3257 ": Audio Vendor Class interface %i found\n",
3258 ifnum);
3259 if (has_video)
3260 printk(KERN_INFO DRIVER_NAME
3261 ": Video interface %i found\n",
3262 ifnum);
3263 if (has_dvb)
3264 printk(KERN_INFO DRIVER_NAME
3265 ": DVB interface %i found\n",
3266 ifnum);
3267
3268 /*
3269 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3270 * video stream wouldn't likely work, since 12 Mbps is generally
3271 * not enough even for most Digital TV streams.
3272 */
3273 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3274 printk(DRIVER_NAME ": Device initialization failed.\n");
3275 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3276 " USB 2.0 port.\n");
3277 retval = -ENODEV;
3278 goto err_free;
3279 }
3280
3281 snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3282 dev->devno = nr;
3283 dev->model = id->driver_info;
3284 dev->alt = -1;
3285 dev->is_audio_only = has_audio && !(has_video || has_dvb);
3286 dev->has_alsa_audio = has_audio;
3287 dev->audio_ifnum = ifnum;
3288
3289 /* Checks if audio is provided by some interface */
3290 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3291 struct usb_interface *uif = udev->config->interface[i];
3292 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3293 dev->has_audio_class = 1;
3294 break;
3295 }
3296 }
3297
3298 dev->num_alt = interface->num_altsetting;
3299
3300 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3301 dev->model = card[nr];
3302
3303 /* save our data pointer in this interface device */
3304 usb_set_intfdata(interface, dev);
3305
3306 /* allocate device struct */
3307 mutex_init(&dev->lock);
3308 mutex_lock(&dev->lock);
3309 retval = em28xx_init_dev(dev, udev, interface, nr);
3310 if (retval) {
3311 goto unlock_and_free;
3312 }
3313
3314 if (has_dvb) {
3315 /* pre-allocate DVB isoc transfer buffers */
3316 retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
3317 EM28XX_DVB_MAX_PACKETS,
3318 EM28XX_DVB_NUM_BUFS,
3319 dev->dvb_max_pkt_size);
3320 if (retval) {
3321 goto unlock_and_free;
3322 }
3323 }
3324
3325 request_modules(dev);
3326
3327 /* Should be the last thing to do, to avoid newer udev's to
3328 open the device before fully initializing it
3329 */
3330 mutex_unlock(&dev->lock);
3331
3332 /*
3333 * These extensions can be modules. If the modules are already
3334 * loaded then we can initialise the device now, otherwise we
3335 * will initialise it when the modules load instead.
3336 */
3337 em28xx_init_extension(dev);
3338
3339 return 0;
3340
3341 unlock_and_free:
3342 mutex_unlock(&dev->lock);
3343
3344 err_free:
3345 kfree(dev->alt_max_pkt_size);
3346 kfree(dev);
3347
3348 err:
3349 clear_bit(nr, &em28xx_devused);
3350
3351 err_no_slot:
3352 usb_put_dev(udev);
3353 return retval;
3354 }
3355
3356 /*
3357 * em28xx_usb_disconnect()
3358 * called when the device gets disconnected
3359 * video device will be unregistered on v4l2_close in case it is still open
3360 */
3361 static void em28xx_usb_disconnect(struct usb_interface *interface)
3362 {
3363 struct em28xx *dev;
3364
3365 dev = usb_get_intfdata(interface);
3366 usb_set_intfdata(interface, NULL);
3367
3368 if (!dev)
3369 return;
3370
3371 if (dev->is_audio_only) {
3372 mutex_lock(&dev->lock);
3373 em28xx_close_extension(dev);
3374 mutex_unlock(&dev->lock);
3375 return;
3376 }
3377
3378 em28xx_info("disconnecting %s\n", dev->vdev->name);
3379
3380 flush_request_modules(dev);
3381
3382 /* wait until all current v4l2 io is finished then deallocate
3383 resources */
3384 mutex_lock(&dev->lock);
3385
3386 v4l2_device_disconnect(&dev->v4l2_dev);
3387
3388 if (dev->users) {
3389 em28xx_warn
3390 ("device %s is open! Deregistration and memory "
3391 "deallocation are deferred on close.\n",
3392 video_device_node_name(dev->vdev));
3393
3394 dev->state |= DEV_MISCONFIGURED;
3395 em28xx_uninit_isoc(dev, dev->mode);
3396 dev->state |= DEV_DISCONNECTED;
3397 } else {
3398 dev->state |= DEV_DISCONNECTED;
3399 em28xx_release_resources(dev);
3400 }
3401
3402 /* free DVB isoc buffers */
3403 em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
3404
3405 mutex_unlock(&dev->lock);
3406
3407 em28xx_close_extension(dev);
3408
3409 if (!dev->users) {
3410 kfree(dev->alt_max_pkt_size);
3411 kfree(dev);
3412 }
3413 }
3414
3415 static struct usb_driver em28xx_usb_driver = {
3416 .name = "em28xx",
3417 .probe = em28xx_usb_probe,
3418 .disconnect = em28xx_usb_disconnect,
3419 .id_table = em28xx_id_table,
3420 };
3421
3422 module_usb_driver(em28xx_usb_driver);
Linux kernel - Deliverables
This page took 0.180749 seconds and 5 git commands to generate.