projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
V4L/DVB (9765): em28xx: move tuner gpio's to the cards struct
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/delay.h>
28 #include <linux/i2c.h>
29 #include <linux/usb.h>
30 #include <media/tuner.h>
31 #include <media/msp3400.h>
32 #include <media/saa7115.h>
33 #include <media/tvp5150.h>
34 #include <media/tveeprom.h>
35 #include <media/v4l2-common.h>
36 #include <media/v4l2-chip-ident.h>
37
38 #include "em28xx.h"
39
40 static int tuner = -1;
41 module_param(tuner, int, 0444);
42 MODULE_PARM_DESC(tuner, "tuner type");
43
44 static unsigned int disable_ir;
45 module_param(disable_ir, int, 0444);
46 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
47
48 struct em28xx_hash_table {
49 unsigned long hash;
50 unsigned int model;
51 unsigned int tuner;
52 };
53
54 /*
55 * Reset sequences for analog/digital modes
56 */
57
58 /* Reset for the most [analog] boards */
59 static struct em28xx_reg_seq default_analog[] = {
60 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
61 { -1, -1, -1, -1},
62 };
63
64 /* Reset for the most [digital] boards */
65 static struct em28xx_reg_seq default_digital[] = {
66 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
67 { -1, -1, -1, -1},
68 };
69
70 /* Board Hauppauge WinTV HVR 900 analog */
71 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
72 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
73 {0x05, 0xff, 0x10, 10},
74 { -1, -1, -1, -1},
75 };
76
77 /* Board Hauppauge WinTV HVR 900 digital */
78 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
79 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
80 {EM2880_R04_GPO, 0x04, 0x0f, 10},
81 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
82 { -1, -1, -1, -1},
83 };
84
85 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
86 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
87 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
88 { -1, -1, -1, -1},
89 };
90
91 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
92
93 /* Board - EM2870 Kworld 355u
94 Analog - No input analog */
95
96 /* Callback for the most boards */
97 static struct em28xx_reg_seq default_tuner_gpio[] = {
98 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
99 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
100 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
101 { -1, -1, -1, -1},
102 };
103
104 /* Pinnacle PCTV HD Mini (80e) GPIOs
105 0-5: not used
106 6: demod reset, active low
107 7: LED on, active high */
108 static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
109 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
110 {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/
111 {EM2874_R80_GPIO, 0xc0, 0xff, 10},
112 { -1, -1, -1, -1},
113 };
114
115 /*
116 * Board definitions
117 */
118 struct em28xx_board em28xx_boards[] = {
119 [EM2750_BOARD_UNKNOWN] = {
120 .name = "Unknown EM2750/EM2751 webcam grabber",
121 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
122 .tuner_type = TUNER_ABSENT, /* This is a webcam */
123 .input = { {
124 .type = EM28XX_VMUX_COMPOSITE1,
125 .vmux = 0,
126 .amux = EM28XX_AMUX_VIDEO,
127 } },
128 },
129 [EM2800_BOARD_UNKNOWN] = {
130 .name = "Unknown EM2800 video grabber",
131 .is_em2800 = 1,
132 .tda9887_conf = TDA9887_PRESENT,
133 .decoder = EM28XX_SAA711X,
134 .tuner_type = TUNER_ABSENT,
135 .input = { {
136 .type = EM28XX_VMUX_COMPOSITE1,
137 .vmux = SAA7115_COMPOSITE0,
138 .amux = EM28XX_AMUX_LINE_IN,
139 }, {
140 .type = EM28XX_VMUX_SVIDEO,
141 .vmux = SAA7115_SVIDEO3,
142 .amux = EM28XX_AMUX_LINE_IN,
143 } },
144 },
145 [EM2820_BOARD_UNKNOWN] = {
146 .name = "Unknown EM2750/28xx video grabber",
147 .tuner_type = TUNER_ABSENT,
148 },
149 [EM2750_BOARD_DLCW_130] = {
150 /* Beijing Huaqi Information Digital Technology Co., Ltd */
151 .name = "Huaqi DLCW-130",
152 .valid = EM28XX_BOARD_NOT_VALIDATED,
153 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
154 .tuner_type = TUNER_ABSENT, /* This is a webcam */
155 .input = { {
156 .type = EM28XX_VMUX_COMPOSITE1,
157 .vmux = 0,
158 .amux = EM28XX_AMUX_VIDEO,
159 } },
160 },
161 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
162 .name = "Kworld PVR TV 2800 RF",
163 .tuner_type = TUNER_TEMIC_PAL,
164 .tda9887_conf = TDA9887_PRESENT,
165 .decoder = EM28XX_SAA711X,
166 .input = { {
167 .type = EM28XX_VMUX_COMPOSITE1,
168 .vmux = SAA7115_COMPOSITE0,
169 .amux = EM28XX_AMUX_LINE_IN,
170 }, {
171 .type = EM28XX_VMUX_SVIDEO,
172 .vmux = SAA7115_SVIDEO3,
173 .amux = EM28XX_AMUX_LINE_IN,
174 } },
175 },
176 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
177 .name = "Terratec Cinergy 250 USB",
178 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
179 .tda9887_conf = TDA9887_PRESENT,
180 .decoder = EM28XX_SAA711X,
181 .input = { {
182 .type = EM28XX_VMUX_TELEVISION,
183 .vmux = SAA7115_COMPOSITE2,
184 .amux = EM28XX_AMUX_LINE_IN,
185 }, {
186 .type = EM28XX_VMUX_COMPOSITE1,
187 .vmux = SAA7115_COMPOSITE0,
188 .amux = EM28XX_AMUX_LINE_IN,
189 }, {
190 .type = EM28XX_VMUX_SVIDEO,
191 .vmux = SAA7115_SVIDEO3,
192 .amux = EM28XX_AMUX_LINE_IN,
193 } },
194 },
195 [EM2820_BOARD_PINNACLE_USB_2] = {
196 .name = "Pinnacle PCTV USB 2",
197 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
198 .tda9887_conf = TDA9887_PRESENT,
199 .decoder = EM28XX_SAA711X,
200 .input = { {
201 .type = EM28XX_VMUX_TELEVISION,
202 .vmux = SAA7115_COMPOSITE2,
203 .amux = EM28XX_AMUX_VIDEO,
204 }, {
205 .type = EM28XX_VMUX_COMPOSITE1,
206 .vmux = SAA7115_COMPOSITE0,
207 .amux = EM28XX_AMUX_LINE_IN,
208 }, {
209 .type = EM28XX_VMUX_SVIDEO,
210 .vmux = SAA7115_SVIDEO3,
211 .amux = EM28XX_AMUX_LINE_IN,
212 } },
213 },
214 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
215 .name = "Hauppauge WinTV USB 2",
216 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
217 .tda9887_conf = TDA9887_PRESENT |
218 TDA9887_PORT1_ACTIVE|
219 TDA9887_PORT2_ACTIVE,
220 .decoder = EM28XX_TVP5150,
221 .has_msp34xx = 1,
222 .input = { {
223 .type = EM28XX_VMUX_TELEVISION,
224 .vmux = TVP5150_COMPOSITE0,
225 .amux = MSP_INPUT_DEFAULT,
226 }, {
227 .type = EM28XX_VMUX_SVIDEO,
228 .vmux = TVP5150_SVIDEO,
229 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
230 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
231 } },
232 },
233 [EM2820_BOARD_DLINK_USB_TV] = {
234 .name = "D-Link DUB-T210 TV Tuner",
235 .valid = EM28XX_BOARD_NOT_VALIDATED,
236 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
237 .tda9887_conf = TDA9887_PRESENT,
238 .decoder = EM28XX_SAA711X,
239 .input = { {
240 .type = EM28XX_VMUX_TELEVISION,
241 .vmux = SAA7115_COMPOSITE2,
242 .amux = EM28XX_AMUX_LINE_IN,
243 }, {
244 .type = EM28XX_VMUX_COMPOSITE1,
245 .vmux = SAA7115_COMPOSITE0,
246 .amux = EM28XX_AMUX_LINE_IN,
247 }, {
248 .type = EM28XX_VMUX_SVIDEO,
249 .vmux = SAA7115_SVIDEO3,
250 .amux = EM28XX_AMUX_LINE_IN,
251 } },
252 },
253 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
254 .name = "Hercules Smart TV USB 2.0",
255 .valid = EM28XX_BOARD_NOT_VALIDATED,
256 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
257 .tda9887_conf = TDA9887_PRESENT,
258 .decoder = EM28XX_SAA711X,
259 .input = { {
260 .type = EM28XX_VMUX_TELEVISION,
261 .vmux = SAA7115_COMPOSITE2,
262 .amux = EM28XX_AMUX_LINE_IN,
263 }, {
264 .type = EM28XX_VMUX_COMPOSITE1,
265 .vmux = SAA7115_COMPOSITE0,
266 .amux = EM28XX_AMUX_LINE_IN,
267 }, {
268 .type = EM28XX_VMUX_SVIDEO,
269 .vmux = SAA7115_SVIDEO3,
270 .amux = EM28XX_AMUX_LINE_IN,
271 } },
272 },
273 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
274 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
275 .valid = EM28XX_BOARD_NOT_VALIDATED,
276 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
277 .tda9887_conf = TDA9887_PRESENT,
278 .decoder = EM28XX_SAA711X,
279 .input = { {
280 .type = EM28XX_VMUX_TELEVISION,
281 .vmux = SAA7115_COMPOSITE2,
282 .amux = EM28XX_AMUX_VIDEO,
283 }, {
284 .type = EM28XX_VMUX_COMPOSITE1,
285 .vmux = SAA7115_COMPOSITE0,
286 .amux = EM28XX_AMUX_LINE_IN,
287 }, {
288 .type = EM28XX_VMUX_SVIDEO,
289 .vmux = SAA7115_SVIDEO3,
290 .amux = EM28XX_AMUX_LINE_IN,
291 } },
292 },
293 [EM2820_BOARD_GADMEI_UTV310] = {
294 .name = "Gadmei UTV310",
295 .valid = EM28XX_BOARD_NOT_VALIDATED,
296 .tuner_type = TUNER_TNF_5335MF,
297 .tda9887_conf = TDA9887_PRESENT,
298 .decoder = EM28XX_SAA711X,
299 .input = { {
300 .type = EM28XX_VMUX_TELEVISION,
301 .vmux = SAA7115_COMPOSITE1,
302 .amux = EM28XX_AMUX_LINE_IN,
303 }, {
304 .type = EM28XX_VMUX_COMPOSITE1,
305 .vmux = SAA7115_COMPOSITE0,
306 .amux = EM28XX_AMUX_LINE_IN,
307 }, {
308 .type = EM28XX_VMUX_SVIDEO,
309 .vmux = SAA7115_SVIDEO3,
310 .amux = EM28XX_AMUX_LINE_IN,
311 } },
312 },
313 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
314 .name = "Leadtek Winfast USB II Deluxe",
315 .valid = EM28XX_BOARD_NOT_VALIDATED,
316 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
317 .tda9887_conf = TDA9887_PRESENT,
318 .decoder = EM28XX_SAA711X,
319 .input = { {
320 .type = EM28XX_VMUX_TELEVISION,
321 .vmux = SAA7115_COMPOSITE2,
322 .amux = EM28XX_AMUX_VIDEO,
323 }, {
324 .type = EM28XX_VMUX_COMPOSITE1,
325 .vmux = SAA7115_COMPOSITE0,
326 .amux = EM28XX_AMUX_LINE_IN,
327 }, {
328 .type = EM28XX_VMUX_SVIDEO,
329 .vmux = SAA7115_COMPOSITE0,
330 .amux = EM28XX_AMUX_LINE_IN,
331 } },
332 },
333 [EM2820_BOARD_PINNACLE_DVC_100] = {
334 .name = "Pinnacle Dazzle DVC 100",
335 .decoder = EM28XX_SAA711X,
336 .tuner_type = TUNER_ABSENT, /* Capture only device */
337 .input = { {
338 .type = EM28XX_VMUX_COMPOSITE1,
339 .vmux = SAA7115_COMPOSITE0,
340 .amux = EM28XX_AMUX_LINE_IN,
341 }, {
342 .type = EM28XX_VMUX_SVIDEO,
343 .vmux = SAA7115_SVIDEO3,
344 .amux = EM28XX_AMUX_LINE_IN,
345 } },
346 },
347 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
348 .name = "Videology 20K14XUSB USB2.0",
349 .valid = EM28XX_BOARD_NOT_VALIDATED,
350 .tuner_type = TUNER_ABSENT, /* This is a webcam */
351 .input = { {
352 .type = EM28XX_VMUX_COMPOSITE1,
353 .vmux = 0,
354 .amux = EM28XX_AMUX_VIDEO,
355 } },
356 },
357 [EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
358 .name = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
359 .valid = EM28XX_BOARD_NOT_VALIDATED,
360 .tuner_type = TUNER_LG_PAL_NEW_TAPC, /* unknown? */
361 .tda9887_conf = TDA9887_PRESENT, /* unknown? */
362 .decoder = EM28XX_SAA711X,
363 .input = { {
364 .type = EM28XX_VMUX_TELEVISION,
365 .vmux = SAA7115_COMPOSITE2,
366 .amux = EM28XX_AMUX_LINE_IN,
367 }, {
368 .type = EM28XX_VMUX_COMPOSITE1,
369 .vmux = SAA7115_COMPOSITE0,
370 .amux = EM28XX_AMUX_LINE_IN,
371 }, {
372 .type = EM28XX_VMUX_SVIDEO,
373 .vmux = SAA7115_SVIDEO3,
374 .amux = EM28XX_AMUX_LINE_IN,
375 } },
376 },
377 [EM2821_BOARD_SUPERCOMP_USB_2] = {
378 .name = "Supercomp USB 2.0 TV",
379 .valid = EM28XX_BOARD_NOT_VALIDATED,
380 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
381 .tda9887_conf = TDA9887_PRESENT |
382 TDA9887_PORT1_ACTIVE |
383 TDA9887_PORT2_ACTIVE,
384 .decoder = EM28XX_SAA711X,
385 .input = { {
386 .type = EM28XX_VMUX_TELEVISION,
387 .vmux = SAA7115_COMPOSITE2,
388 .amux = EM28XX_AMUX_LINE_IN,
389 }, {
390 .type = EM28XX_VMUX_COMPOSITE1,
391 .vmux = SAA7115_COMPOSITE0,
392 .amux = EM28XX_AMUX_VIDEO,
393 }, {
394 .type = EM28XX_VMUX_SVIDEO,
395 .vmux = SAA7115_SVIDEO3,
396 .amux = EM28XX_AMUX_LINE_IN,
397 } },
398 },
399 [EM2821_BOARD_USBGEAR_VD204] = {
400 .name = "Usbgear VD204v9",
401 .valid = EM28XX_BOARD_NOT_VALIDATED,
402 .tuner_type = TUNER_ABSENT, /* Capture only device */
403 .decoder = EM28XX_SAA711X,
404 .input = { {
405 .type = EM28XX_VMUX_COMPOSITE1,
406 .vmux = SAA7115_COMPOSITE0,
407 .amux = EM28XX_AMUX_LINE_IN,
408 }, {
409 .type = EM28XX_VMUX_SVIDEO,
410 .vmux = SAA7115_SVIDEO3,
411 .amux = EM28XX_AMUX_LINE_IN,
412 } },
413 },
414 [EM2860_BOARD_NETGMBH_CAM] = {
415 /* Beijing Huaqi Information Digital Technology Co., Ltd */
416 .name = "NetGMBH Cam",
417 .valid = EM28XX_BOARD_NOT_VALIDATED,
418 .tuner_type = TUNER_ABSENT, /* This is a webcam */
419 .input = { {
420 .type = EM28XX_VMUX_COMPOSITE1,
421 .vmux = 0,
422 .amux = EM28XX_AMUX_VIDEO,
423 } },
424 },
425 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
426 .name = "Typhoon DVD Maker",
427 .decoder = EM28XX_SAA711X,
428 .tuner_type = TUNER_ABSENT, /* Capture only device */
429 .input = { {
430 .type = EM28XX_VMUX_COMPOSITE1,
431 .vmux = SAA7115_COMPOSITE0,
432 .amux = EM28XX_AMUX_LINE_IN,
433 }, {
434 .type = EM28XX_VMUX_SVIDEO,
435 .vmux = SAA7115_SVIDEO3,
436 .amux = EM28XX_AMUX_LINE_IN,
437 } },
438 },
439 [EM2860_BOARD_GADMEI_UTV330] = {
440 .name = "Gadmei UTV330",
441 .valid = EM28XX_BOARD_NOT_VALIDATED,
442 .tuner_type = TUNER_TNF_5335MF,
443 .tda9887_conf = TDA9887_PRESENT,
444 .decoder = EM28XX_SAA711X,
445 .input = { {
446 .type = EM28XX_VMUX_TELEVISION,
447 .vmux = SAA7115_COMPOSITE2,
448 .amux = EM28XX_AMUX_VIDEO,
449 }, {
450 .type = EM28XX_VMUX_COMPOSITE1,
451 .vmux = SAA7115_COMPOSITE0,
452 .amux = EM28XX_AMUX_LINE_IN,
453 }, {
454 .type = EM28XX_VMUX_SVIDEO,
455 .vmux = SAA7115_SVIDEO3,
456 .amux = EM28XX_AMUX_LINE_IN,
457 } },
458 },
459 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
460 .name = "Terratec Cinergy A Hybrid XS",
461 .valid = EM28XX_BOARD_NOT_VALIDATED,
462 .tuner_type = TUNER_XC2028,
463 .tuner_gpio = default_tuner_gpio,
464 .decoder = EM28XX_TVP5150,
465
466 .input = { {
467 .type = EM28XX_VMUX_TELEVISION,
468 .vmux = TVP5150_COMPOSITE0,
469 .amux = EM28XX_AMUX_VIDEO,
470 .gpio = hauppauge_wintv_hvr_900_analog,
471 }, {
472 .type = EM28XX_VMUX_COMPOSITE1,
473 .vmux = TVP5150_COMPOSITE1,
474 .amux = EM28XX_AMUX_LINE_IN,
475 .gpio = hauppauge_wintv_hvr_900_analog,
476 }, {
477 .type = EM28XX_VMUX_SVIDEO,
478 .vmux = TVP5150_SVIDEO,
479 .amux = EM28XX_AMUX_LINE_IN,
480 .gpio = hauppauge_wintv_hvr_900_analog,
481 } },
482 },
483 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
484 .name = "KWorld PVRTV 300U",
485 .valid = EM28XX_BOARD_NOT_VALIDATED,
486 .tuner_type = TUNER_XC2028,
487 .tuner_gpio = default_tuner_gpio,
488 .decoder = EM28XX_TVP5150,
489 .input = { {
490 .type = EM28XX_VMUX_TELEVISION,
491 .vmux = TVP5150_COMPOSITE0,
492 .amux = EM28XX_AMUX_VIDEO,
493 }, {
494 .type = EM28XX_VMUX_COMPOSITE1,
495 .vmux = TVP5150_COMPOSITE1,
496 .amux = EM28XX_AMUX_LINE_IN,
497 }, {
498 .type = EM28XX_VMUX_SVIDEO,
499 .vmux = TVP5150_SVIDEO,
500 .amux = EM28XX_AMUX_LINE_IN,
501 } },
502 },
503 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
504 .name = "Yakumo MovieMixer",
505 .tuner_type = TUNER_ABSENT, /* Capture only device */
506 .decoder = EM28XX_TVP5150,
507 .input = { {
508 .type = EM28XX_VMUX_TELEVISION,
509 .vmux = TVP5150_COMPOSITE0,
510 .amux = EM28XX_AMUX_VIDEO,
511 }, {
512 .type = EM28XX_VMUX_COMPOSITE1,
513 .vmux = TVP5150_COMPOSITE1,
514 .amux = EM28XX_AMUX_LINE_IN,
515 }, {
516 .type = EM28XX_VMUX_SVIDEO,
517 .vmux = TVP5150_SVIDEO,
518 .amux = EM28XX_AMUX_LINE_IN,
519 } },
520 },
521 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
522 .name = "Plextor ConvertX PX-TV100U",
523 .valid = EM28XX_BOARD_NOT_VALIDATED,
524 .tuner_type = TUNER_TNF_5335MF,
525 .tda9887_conf = TDA9887_PRESENT,
526 .decoder = EM28XX_TVP5150,
527 .input = { {
528 .type = EM28XX_VMUX_TELEVISION,
529 .vmux = TVP5150_COMPOSITE0,
530 .amux = EM28XX_AMUX_LINE_IN,
531 }, {
532 .type = EM28XX_VMUX_COMPOSITE1,
533 .vmux = TVP5150_COMPOSITE1,
534 .amux = EM28XX_AMUX_LINE_IN,
535 }, {
536 .type = EM28XX_VMUX_SVIDEO,
537 .vmux = TVP5150_SVIDEO,
538 .amux = EM28XX_AMUX_LINE_IN,
539 } },
540 },
541
542 /* Those boards with em2870 are DVB Only*/
543
544 [EM2870_BOARD_TERRATEC_XS] = {
545 .name = "Terratec Cinergy T XS",
546 .valid = EM28XX_BOARD_NOT_VALIDATED,
547 .tuner_type = TUNER_XC2028,
548 .tuner_gpio = default_tuner_gpio,
549 },
550 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
551 .name = "Terratec Cinergy T XS (MT2060)",
552 .valid = EM28XX_BOARD_NOT_VALIDATED,
553 .tuner_type = TUNER_ABSENT, /* MT2060 */
554 },
555 [EM2870_BOARD_KWORLD_350U] = {
556 .name = "Kworld 350 U DVB-T",
557 .valid = EM28XX_BOARD_NOT_VALIDATED,
558 .tuner_type = TUNER_XC2028,
559 .tuner_gpio = default_tuner_gpio,
560 },
561 [EM2870_BOARD_KWORLD_355U] = {
562 .name = "Kworld 355 U DVB-T",
563 .valid = EM28XX_BOARD_NOT_VALIDATED,
564 },
565 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
566 .name = "Pinnacle PCTV DVB-T",
567 .valid = EM28XX_BOARD_NOT_VALIDATED,
568 .tuner_type = TUNER_ABSENT, /* MT2060 */
569 /* djh - I have serious doubts this is right... */
570 .xclk = EM28XX_XCLK_IR_RC5_MODE |
571 EM28XX_XCLK_FREQUENCY_10MHZ,
572 },
573 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
574 .name = "Compro, VideoMate U3",
575 .valid = EM28XX_BOARD_NOT_VALIDATED,
576 .tuner_type = TUNER_ABSENT, /* MT2060 */
577 },
578
579 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
580 .name = "Terratec Hybrid XS Secam",
581 .valid = EM28XX_BOARD_NOT_VALIDATED,
582 .has_msp34xx = 1,
583 .tuner_type = TUNER_XC2028,
584 .tuner_gpio = default_tuner_gpio,
585 .decoder = EM28XX_TVP5150,
586 .input = { {
587 .type = EM28XX_VMUX_TELEVISION,
588 .vmux = TVP5150_COMPOSITE0,
589 .amux = EM28XX_AMUX_VIDEO,
590 .gpio = default_analog,
591 }, {
592 .type = EM28XX_VMUX_COMPOSITE1,
593 .vmux = TVP5150_COMPOSITE1,
594 .amux = EM28XX_AMUX_LINE_IN,
595 .gpio = default_analog,
596 }, {
597 .type = EM28XX_VMUX_SVIDEO,
598 .vmux = TVP5150_SVIDEO,
599 .amux = EM28XX_AMUX_LINE_IN,
600 .gpio = default_analog,
601 } },
602 },
603 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
604 .name = "Hauppauge WinTV HVR 900",
605 .tda9887_conf = TDA9887_PRESENT,
606 .tuner_type = TUNER_XC2028,
607 .tuner_gpio = default_tuner_gpio,
608 .mts_firmware = 1,
609 .has_dvb = 1,
610 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
611 .decoder = EM28XX_TVP5150,
612 .input = { {
613 .type = EM28XX_VMUX_TELEVISION,
614 .vmux = TVP5150_COMPOSITE0,
615 .amux = EM28XX_AMUX_VIDEO,
616 .gpio = hauppauge_wintv_hvr_900_analog,
617 }, {
618 .type = EM28XX_VMUX_COMPOSITE1,
619 .vmux = TVP5150_COMPOSITE1,
620 .amux = EM28XX_AMUX_LINE_IN,
621 .gpio = hauppauge_wintv_hvr_900_analog,
622 }, {
623 .type = EM28XX_VMUX_SVIDEO,
624 .vmux = TVP5150_SVIDEO,
625 .amux = EM28XX_AMUX_LINE_IN,
626 .gpio = hauppauge_wintv_hvr_900_analog,
627 } },
628 },
629 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
630 .name = "Hauppauge WinTV HVR 900 (R2)",
631 .tda9887_conf = TDA9887_PRESENT,
632 .tuner_type = TUNER_XC2028,
633 .tuner_gpio = default_tuner_gpio,
634 .mts_firmware = 1,
635 .decoder = EM28XX_TVP5150,
636 .input = { {
637 .type = EM28XX_VMUX_TELEVISION,
638 .vmux = TVP5150_COMPOSITE0,
639 .amux = EM28XX_AMUX_VIDEO,
640 .gpio = hauppauge_wintv_hvr_900_analog,
641 }, {
642 .type = EM28XX_VMUX_COMPOSITE1,
643 .vmux = TVP5150_COMPOSITE1,
644 .amux = EM28XX_AMUX_LINE_IN,
645 .gpio = hauppauge_wintv_hvr_900_analog,
646 }, {
647 .type = EM28XX_VMUX_SVIDEO,
648 .vmux = TVP5150_SVIDEO,
649 .amux = EM28XX_AMUX_LINE_IN,
650 .gpio = hauppauge_wintv_hvr_900_analog,
651 } },
652 },
653 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
654 .name = "Hauppauge WinTV HVR 950",
655 .tuner_type = TUNER_XC2028,
656 .tuner_gpio = default_tuner_gpio,
657 .mts_firmware = 1,
658 .has_dvb = 1,
659 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
660 .ir_codes = ir_codes_hauppauge_new,
661 .decoder = EM28XX_TVP5150,
662 .input = { {
663 .type = EM28XX_VMUX_TELEVISION,
664 .vmux = TVP5150_COMPOSITE0,
665 .amux = EM28XX_AMUX_VIDEO,
666 .gpio = hauppauge_wintv_hvr_900_analog,
667 }, {
668 .type = EM28XX_VMUX_COMPOSITE1,
669 .vmux = TVP5150_COMPOSITE1,
670 .amux = EM28XX_AMUX_LINE_IN,
671 .gpio = hauppauge_wintv_hvr_900_analog,
672 }, {
673 .type = EM28XX_VMUX_SVIDEO,
674 .vmux = TVP5150_SVIDEO,
675 .amux = EM28XX_AMUX_LINE_IN,
676 .gpio = hauppauge_wintv_hvr_900_analog,
677 } },
678 },
679 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
680 .name = "Pinnacle PCTV HD Pro Stick",
681 .tuner_type = TUNER_XC2028,
682 .tuner_gpio = default_tuner_gpio,
683 .mts_firmware = 1,
684 .has_dvb = 1,
685 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
686 .ir_codes = ir_codes_pinnacle_pctv_hd,
687 .decoder = EM28XX_TVP5150,
688 .input = { {
689 .type = EM28XX_VMUX_TELEVISION,
690 .vmux = TVP5150_COMPOSITE0,
691 .amux = EM28XX_AMUX_VIDEO,
692 .gpio = hauppauge_wintv_hvr_900_analog,
693 }, {
694 .type = EM28XX_VMUX_COMPOSITE1,
695 .vmux = TVP5150_COMPOSITE1,
696 .amux = EM28XX_AMUX_LINE_IN,
697 .gpio = hauppauge_wintv_hvr_900_analog,
698 }, {
699 .type = EM28XX_VMUX_SVIDEO,
700 .vmux = TVP5150_SVIDEO,
701 .amux = EM28XX_AMUX_LINE_IN,
702 .gpio = hauppauge_wintv_hvr_900_analog,
703 } },
704 },
705 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
706 .name = "AMD ATI TV Wonder HD 600",
707 .tuner_type = TUNER_XC2028,
708 .tuner_gpio = default_tuner_gpio,
709 .mts_firmware = 1,
710 .has_dvb = 1,
711 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
712 .ir_codes = ir_codes_ati_tv_wonder_hd_600,
713 .decoder = EM28XX_TVP5150,
714 .input = { {
715 .type = EM28XX_VMUX_TELEVISION,
716 .vmux = TVP5150_COMPOSITE0,
717 .amux = EM28XX_AMUX_VIDEO,
718 .gpio = hauppauge_wintv_hvr_900_analog,
719 }, {
720 .type = EM28XX_VMUX_COMPOSITE1,
721 .vmux = TVP5150_COMPOSITE1,
722 .amux = EM28XX_AMUX_LINE_IN,
723 .gpio = hauppauge_wintv_hvr_900_analog,
724 }, {
725 .type = EM28XX_VMUX_SVIDEO,
726 .vmux = TVP5150_SVIDEO,
727 .amux = EM28XX_AMUX_LINE_IN,
728 .gpio = hauppauge_wintv_hvr_900_analog,
729 } },
730 },
731 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
732 .name = "Terratec Hybrid XS",
733 .tuner_type = TUNER_XC2028,
734 .tuner_gpio = default_tuner_gpio,
735 .decoder = EM28XX_TVP5150,
736 .has_dvb = 1,
737 .dvb_gpio = default_analog,
738 .input = { {
739 .type = EM28XX_VMUX_TELEVISION,
740 .vmux = TVP5150_COMPOSITE0,
741 .amux = EM28XX_AMUX_VIDEO,
742 .gpio = default_analog,
743 }, {
744 .type = EM28XX_VMUX_COMPOSITE1,
745 .vmux = TVP5150_COMPOSITE1,
746 .amux = EM28XX_AMUX_LINE_IN,
747 .gpio = default_analog,
748 }, {
749 .type = EM28XX_VMUX_SVIDEO,
750 .vmux = TVP5150_SVIDEO,
751 .amux = EM28XX_AMUX_LINE_IN,
752 .gpio = default_analog,
753 } },
754 },
755 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
756 as Prodigy XS with a different PID, let's keep it separated for now
757 maybe we'll need it lateron */
758 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
759 .name = "Terratec Prodigy XS",
760 .tuner_type = TUNER_XC2028,
761 .tuner_gpio = default_tuner_gpio,
762 .decoder = EM28XX_TVP5150,
763 .input = { {
764 .type = EM28XX_VMUX_TELEVISION,
765 .vmux = TVP5150_COMPOSITE0,
766 .amux = EM28XX_AMUX_VIDEO,
767 .gpio = hauppauge_wintv_hvr_900_analog,
768 }, {
769 .type = EM28XX_VMUX_COMPOSITE1,
770 .vmux = TVP5150_COMPOSITE1,
771 .amux = EM28XX_AMUX_LINE_IN,
772 .gpio = hauppauge_wintv_hvr_900_analog,
773 }, {
774 .type = EM28XX_VMUX_SVIDEO,
775 .vmux = TVP5150_SVIDEO,
776 .amux = EM28XX_AMUX_LINE_IN,
777 .gpio = hauppauge_wintv_hvr_900_analog,
778 } },
779 },
780 [EM2820_BOARD_MSI_VOX_USB_2] = {
781 .name = "MSI VOX USB 2.0",
782 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
783 .tda9887_conf = TDA9887_PRESENT |
784 TDA9887_PORT1_ACTIVE |
785 TDA9887_PORT2_ACTIVE,
786 .max_range_640_480 = 1,
787 .decoder = EM28XX_SAA711X,
788 .input = { {
789 .type = EM28XX_VMUX_TELEVISION,
790 .vmux = SAA7115_COMPOSITE4,
791 .amux = EM28XX_AMUX_VIDEO,
792 }, {
793 .type = EM28XX_VMUX_COMPOSITE1,
794 .vmux = SAA7115_COMPOSITE0,
795 .amux = EM28XX_AMUX_LINE_IN,
796 }, {
797 .type = EM28XX_VMUX_SVIDEO,
798 .vmux = SAA7115_SVIDEO3,
799 .amux = EM28XX_AMUX_LINE_IN,
800 } },
801 },
802 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
803 .name = "Terratec Cinergy 200 USB",
804 .is_em2800 = 1,
805 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
806 .tda9887_conf = TDA9887_PRESENT,
807 .decoder = EM28XX_SAA711X,
808 .input = { {
809 .type = EM28XX_VMUX_TELEVISION,
810 .vmux = SAA7115_COMPOSITE2,
811 .amux = EM28XX_AMUX_VIDEO,
812 }, {
813 .type = EM28XX_VMUX_COMPOSITE1,
814 .vmux = SAA7115_COMPOSITE0,
815 .amux = EM28XX_AMUX_LINE_IN,
816 }, {
817 .type = EM28XX_VMUX_SVIDEO,
818 .vmux = SAA7115_SVIDEO3,
819 .amux = EM28XX_AMUX_LINE_IN,
820 } },
821 },
822 [EM2800_BOARD_GRABBEEX_USB2800] = {
823 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
824 .is_em2800 = 1,
825 .decoder = EM28XX_SAA711X,
826 .tuner_type = TUNER_ABSENT, /* capture only board */
827 .input = { {
828 .type = EM28XX_VMUX_COMPOSITE1,
829 .vmux = SAA7115_COMPOSITE0,
830 .amux = EM28XX_AMUX_LINE_IN,
831 }, {
832 .type = EM28XX_VMUX_SVIDEO,
833 .vmux = SAA7115_SVIDEO3,
834 .amux = EM28XX_AMUX_LINE_IN,
835 } },
836 },
837 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
838 .name = "Leadtek Winfast USB II",
839 .is_em2800 = 1,
840 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
841 .tda9887_conf = TDA9887_PRESENT,
842 .decoder = EM28XX_SAA711X,
843 .input = { {
844 .type = EM28XX_VMUX_TELEVISION,
845 .vmux = SAA7115_COMPOSITE2,
846 .amux = EM28XX_AMUX_VIDEO,
847 }, {
848 .type = EM28XX_VMUX_COMPOSITE1,
849 .vmux = SAA7115_COMPOSITE0,
850 .amux = EM28XX_AMUX_LINE_IN,
851 }, {
852 .type = EM28XX_VMUX_SVIDEO,
853 .vmux = SAA7115_SVIDEO3,
854 .amux = EM28XX_AMUX_LINE_IN,
855 } },
856 },
857 [EM2800_BOARD_KWORLD_USB2800] = {
858 .name = "Kworld USB2800",
859 .is_em2800 = 1,
860 .tuner_type = TUNER_PHILIPS_FCV1236D,
861 .tda9887_conf = TDA9887_PRESENT,
862 .decoder = EM28XX_SAA711X,
863 .input = { {
864 .type = EM28XX_VMUX_TELEVISION,
865 .vmux = SAA7115_COMPOSITE2,
866 .amux = EM28XX_AMUX_VIDEO,
867 }, {
868 .type = EM28XX_VMUX_COMPOSITE1,
869 .vmux = SAA7115_COMPOSITE0,
870 .amux = EM28XX_AMUX_LINE_IN,
871 }, {
872 .type = EM28XX_VMUX_SVIDEO,
873 .vmux = SAA7115_SVIDEO3,
874 .amux = EM28XX_AMUX_LINE_IN,
875 } },
876 },
877 [EM2820_BOARD_PINNACLE_DVC_90] = {
878 .name = "Pinnacle Dazzle DVC 90/DVC 100",
879 .tuner_type = TUNER_ABSENT, /* capture only board */
880 .decoder = EM28XX_SAA711X,
881 .input = { {
882 .type = EM28XX_VMUX_COMPOSITE1,
883 .vmux = SAA7115_COMPOSITE0,
884 .amux = EM28XX_AMUX_LINE_IN,
885 }, {
886 .type = EM28XX_VMUX_SVIDEO,
887 .vmux = SAA7115_SVIDEO3,
888 .amux = EM28XX_AMUX_LINE_IN,
889 } },
890 },
891 [EM2800_BOARD_VGEAR_POCKETTV] = {
892 .name = "V-Gear PocketTV",
893 .is_em2800 = 1,
894 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
895 .tda9887_conf = TDA9887_PRESENT,
896 .decoder = EM28XX_SAA711X,
897 .input = { {
898 .type = EM28XX_VMUX_TELEVISION,
899 .vmux = SAA7115_COMPOSITE2,
900 .amux = EM28XX_AMUX_VIDEO,
901 }, {
902 .type = EM28XX_VMUX_COMPOSITE1,
903 .vmux = SAA7115_COMPOSITE0,
904 .amux = EM28XX_AMUX_LINE_IN,
905 }, {
906 .type = EM28XX_VMUX_SVIDEO,
907 .vmux = SAA7115_SVIDEO3,
908 .amux = EM28XX_AMUX_LINE_IN,
909 } },
910 },
911 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
912 .name = "Pixelview Prolink PlayTV USB 2.0",
913 .tda9887_conf = TDA9887_PRESENT,
914 .tuner_type = TUNER_YMEC_TVF_5533MF,
915 .decoder = EM28XX_SAA711X,
916 .input = { {
917 .type = EM28XX_VMUX_TELEVISION,
918 .vmux = SAA7115_COMPOSITE2,
919 .amux = EM28XX_AMUX_VIDEO,
920 .aout = EM28XX_AOUT_MONO | /* I2S */
921 EM28XX_AOUT_MASTER, /* Line out pin */
922 }, {
923 .type = EM28XX_VMUX_COMPOSITE1,
924 .vmux = SAA7115_COMPOSITE0,
925 .amux = EM28XX_AMUX_LINE_IN,
926 }, {
927 .type = EM28XX_VMUX_SVIDEO,
928 .vmux = SAA7115_SVIDEO3,
929 .amux = EM28XX_AMUX_LINE_IN,
930 } },
931 },
932 [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
933 .name = "PointNix Intra-Oral Camera",
934 .has_snapshot_button = 1,
935 .tda9887_conf = TDA9887_PRESENT,
936 .tuner_type = TUNER_ABSENT,
937 .decoder = EM28XX_SAA711X,
938 .input = { {
939 .type = EM28XX_VMUX_SVIDEO,
940 .vmux = SAA7115_SVIDEO3,
941 .amux = EM28XX_AMUX_VIDEO,
942 } },
943 },
944 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
945 .name = "MSI DigiVox A/D",
946 .valid = EM28XX_BOARD_NOT_VALIDATED,
947 .tuner_type = TUNER_XC2028,
948 .tuner_gpio = default_tuner_gpio,
949 .decoder = EM28XX_TVP5150,
950 .input = { {
951 .type = EM28XX_VMUX_TELEVISION,
952 .vmux = TVP5150_COMPOSITE0,
953 .amux = EM28XX_AMUX_VIDEO,
954 .gpio = em2880_msi_digivox_ad_analog,
955 }, {
956 .type = EM28XX_VMUX_COMPOSITE1,
957 .vmux = TVP5150_COMPOSITE1,
958 .amux = EM28XX_AMUX_LINE_IN,
959 .gpio = em2880_msi_digivox_ad_analog,
960 }, {
961 .type = EM28XX_VMUX_SVIDEO,
962 .vmux = TVP5150_SVIDEO,
963 .amux = EM28XX_AMUX_LINE_IN,
964 .gpio = em2880_msi_digivox_ad_analog,
965 } },
966 },
967 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
968 .name = "MSI DigiVox A/D II",
969 .valid = EM28XX_BOARD_NOT_VALIDATED,
970 .tuner_type = TUNER_XC2028,
971 .tuner_gpio = default_tuner_gpio,
972 .decoder = EM28XX_TVP5150,
973 .input = { {
974 .type = EM28XX_VMUX_TELEVISION,
975 .vmux = TVP5150_COMPOSITE0,
976 .amux = EM28XX_AMUX_VIDEO,
977 .gpio = em2880_msi_digivox_ad_analog,
978 }, {
979 .type = EM28XX_VMUX_COMPOSITE1,
980 .vmux = TVP5150_COMPOSITE1,
981 .amux = EM28XX_AMUX_LINE_IN,
982 .gpio = em2880_msi_digivox_ad_analog,
983 }, {
984 .type = EM28XX_VMUX_SVIDEO,
985 .vmux = TVP5150_SVIDEO,
986 .amux = EM28XX_AMUX_LINE_IN,
987 .gpio = em2880_msi_digivox_ad_analog,
988 } },
989 },
990 [EM2880_BOARD_KWORLD_DVB_305U] = {
991 .name = "KWorld DVB-T 305U",
992 .valid = EM28XX_BOARD_NOT_VALIDATED,
993 .tuner_type = TUNER_XC2028,
994 .tuner_gpio = default_tuner_gpio,
995 .decoder = EM28XX_TVP5150,
996 .input = { {
997 .type = EM28XX_VMUX_TELEVISION,
998 .vmux = TVP5150_COMPOSITE0,
999 .amux = EM28XX_AMUX_VIDEO,
1000 }, {
1001 .type = EM28XX_VMUX_COMPOSITE1,
1002 .vmux = TVP5150_COMPOSITE1,
1003 .amux = EM28XX_AMUX_LINE_IN,
1004 }, {
1005 .type = EM28XX_VMUX_SVIDEO,
1006 .vmux = TVP5150_SVIDEO,
1007 .amux = EM28XX_AMUX_LINE_IN,
1008 } },
1009 },
1010 [EM2880_BOARD_KWORLD_DVB_310U] = {
1011 .name = "KWorld DVB-T 310U",
1012 .tuner_type = TUNER_XC2028,
1013 .tuner_gpio = default_tuner_gpio,
1014 .has_dvb = 1,
1015 .dvb_gpio = default_digital,
1016 .mts_firmware = 1,
1017 .decoder = EM28XX_TVP5150,
1018 .input = { {
1019 .type = EM28XX_VMUX_TELEVISION,
1020 .vmux = TVP5150_COMPOSITE0,
1021 .amux = EM28XX_AMUX_VIDEO,
1022 .gpio = default_analog,
1023 }, {
1024 .type = EM28XX_VMUX_COMPOSITE1,
1025 .vmux = TVP5150_COMPOSITE1,
1026 .amux = EM28XX_AMUX_LINE_IN,
1027 .gpio = default_analog,
1028 }, { /* S-video has not been tested yet */
1029 .type = EM28XX_VMUX_SVIDEO,
1030 .vmux = TVP5150_SVIDEO,
1031 .amux = EM28XX_AMUX_LINE_IN,
1032 .gpio = default_analog,
1033 } },
1034 },
1035 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1036 .name = "DNT DA2 Hybrid",
1037 .valid = EM28XX_BOARD_NOT_VALIDATED,
1038 .tuner_type = TUNER_XC2028,
1039 .tuner_gpio = default_tuner_gpio,
1040 .decoder = EM28XX_TVP5150,
1041 .input = { {
1042 .type = EM28XX_VMUX_TELEVISION,
1043 .vmux = TVP5150_COMPOSITE0,
1044 .amux = EM28XX_AMUX_VIDEO,
1045 .gpio = default_analog,
1046 }, {
1047 .type = EM28XX_VMUX_COMPOSITE1,
1048 .vmux = TVP5150_COMPOSITE1,
1049 .amux = EM28XX_AMUX_LINE_IN,
1050 .gpio = default_analog,
1051 }, {
1052 .type = EM28XX_VMUX_SVIDEO,
1053 .vmux = TVP5150_SVIDEO,
1054 .amux = EM28XX_AMUX_LINE_IN,
1055 .gpio = default_analog,
1056 } },
1057 },
1058 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1059 .name = "Pinnacle Hybrid Pro",
1060 .valid = EM28XX_BOARD_NOT_VALIDATED,
1061 .tuner_type = TUNER_XC2028,
1062 .tuner_gpio = default_tuner_gpio,
1063 .decoder = EM28XX_TVP5150,
1064 .input = { {
1065 .type = EM28XX_VMUX_TELEVISION,
1066 .vmux = TVP5150_COMPOSITE0,
1067 .amux = EM28XX_AMUX_VIDEO,
1068 .gpio = default_analog,
1069 }, {
1070 .type = EM28XX_VMUX_COMPOSITE1,
1071 .vmux = TVP5150_COMPOSITE1,
1072 .amux = EM28XX_AMUX_LINE_IN,
1073 .gpio = default_analog,
1074 }, {
1075 .type = EM28XX_VMUX_SVIDEO,
1076 .vmux = TVP5150_SVIDEO,
1077 .amux = EM28XX_AMUX_LINE_IN,
1078 .gpio = default_analog,
1079 } },
1080 },
1081 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1082 .name = "Pinnacle Hybrid Pro (2)",
1083 .valid = EM28XX_BOARD_NOT_VALIDATED,
1084 .tuner_type = TUNER_XC2028,
1085 .tuner_gpio = default_tuner_gpio,
1086 .mts_firmware = 1,
1087 .decoder = EM28XX_TVP5150,
1088 .input = { {
1089 .type = EM28XX_VMUX_TELEVISION,
1090 .vmux = TVP5150_COMPOSITE0,
1091 .amux = EM28XX_AMUX_VIDEO,
1092 .gpio = hauppauge_wintv_hvr_900_analog,
1093 }, {
1094 .type = EM28XX_VMUX_COMPOSITE1,
1095 .vmux = TVP5150_COMPOSITE1,
1096 .amux = EM28XX_AMUX_LINE_IN,
1097 .gpio = hauppauge_wintv_hvr_900_analog,
1098 }, {
1099 .type = EM28XX_VMUX_SVIDEO,
1100 .vmux = TVP5150_SVIDEO,
1101 .amux = EM28XX_AMUX_LINE_IN,
1102 .gpio = hauppauge_wintv_hvr_900_analog,
1103 } },
1104 },
1105 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1106 .name = "Kworld VS-DVB-T 323UR",
1107 .valid = EM28XX_BOARD_NOT_VALIDATED,
1108 .tuner_type = TUNER_XC2028,
1109 .tuner_gpio = default_tuner_gpio,
1110 .decoder = EM28XX_TVP5150,
1111 .input = { {
1112 .type = EM28XX_VMUX_TELEVISION,
1113 .vmux = TVP5150_COMPOSITE0,
1114 .amux = EM28XX_AMUX_VIDEO,
1115 }, {
1116 .type = EM28XX_VMUX_COMPOSITE1,
1117 .vmux = TVP5150_COMPOSITE1,
1118 .amux = EM28XX_AMUX_LINE_IN,
1119 }, {
1120 .type = EM28XX_VMUX_SVIDEO,
1121 .vmux = TVP5150_SVIDEO,
1122 .amux = EM28XX_AMUX_LINE_IN,
1123 } },
1124 },
1125 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1126 .name = "Terratec Hybrid XS (em2882)",
1127 .valid = EM28XX_BOARD_NOT_VALIDATED,
1128 .tuner_type = TUNER_XC2028,
1129 .tuner_gpio = default_tuner_gpio,
1130 .decoder = EM28XX_TVP5150,
1131 .input = { {
1132 .type = EM28XX_VMUX_TELEVISION,
1133 .vmux = TVP5150_COMPOSITE0,
1134 .amux = EM28XX_AMUX_VIDEO,
1135 .gpio = hauppauge_wintv_hvr_900_analog,
1136 }, {
1137 .type = EM28XX_VMUX_COMPOSITE1,
1138 .vmux = TVP5150_COMPOSITE1,
1139 .amux = EM28XX_AMUX_LINE_IN,
1140 .gpio = hauppauge_wintv_hvr_900_analog,
1141 }, {
1142 .type = EM28XX_VMUX_SVIDEO,
1143 .vmux = TVP5150_SVIDEO,
1144 .amux = EM28XX_AMUX_LINE_IN,
1145 .gpio = hauppauge_wintv_hvr_900_analog,
1146 } },
1147 },
1148 [EM2883_BOARD_KWORLD_HYBRID_A316] = {
1149 .name = "Kworld PlusTV HD Hybrid 330",
1150 .valid = EM28XX_BOARD_NOT_VALIDATED,
1151 .tuner_type = TUNER_XC2028,
1152 .tuner_gpio = default_tuner_gpio,
1153 .decoder = EM28XX_TVP5150,
1154 .input = { {
1155 .type = EM28XX_VMUX_TELEVISION,
1156 .vmux = TVP5150_COMPOSITE0,
1157 .amux = EM28XX_AMUX_VIDEO,
1158 .gpio = hauppauge_wintv_hvr_900_analog,
1159 }, {
1160 .type = EM28XX_VMUX_COMPOSITE1,
1161 .vmux = TVP5150_COMPOSITE1,
1162 .amux = EM28XX_AMUX_LINE_IN,
1163 .gpio = hauppauge_wintv_hvr_900_analog,
1164 }, {
1165 .type = EM28XX_VMUX_SVIDEO,
1166 .vmux = TVP5150_SVIDEO,
1167 .amux = EM28XX_AMUX_LINE_IN,
1168 .gpio = hauppauge_wintv_hvr_900_analog,
1169 } },
1170 },
1171 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1172 .name = "Compro VideoMate ForYou/Stereo",
1173 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1174 .tda9887_conf = TDA9887_PRESENT,
1175 .decoder = EM28XX_TVP5150,
1176 .input = { {
1177 .type = EM28XX_VMUX_TELEVISION,
1178 .vmux = TVP5150_COMPOSITE0,
1179 .amux = EM28XX_AMUX_LINE_IN,
1180 }, {
1181 .type = EM28XX_VMUX_SVIDEO,
1182 .vmux = TVP5150_SVIDEO,
1183 .amux = EM28XX_AMUX_LINE_IN,
1184 } },
1185 },
1186
1187 /* em2874 tuners are DVB only */
1188
1189 [EM2874_BOARD_PINNACLE_PCTV_80E] = {
1190 .name = "Pinnacle PCTV HD Mini",
1191 .tuner_type = TUNER_ABSENT,
1192 .has_dvb = 1,
1193 .dvb_gpio = em2874_pinnacle_80e_digital,
1194 .ir_codes = ir_codes_pinnacle_pctv_hd,
1195 .decoder = EM28XX_NODECODER,
1196 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1197 EM2874_I2C_SECONDARY_BUS_SELECT |
1198 EM28XX_I2C_FREQ_400_KHZ,
1199 #ifdef DJH_DEBUG
1200 .input = { {
1201 .type = EM28XX_VMUX_TELEVISION,
1202 .vmux = TVP5150_COMPOSITE0,
1203 .amux = EM28XX_AMUX_LINE_IN,
1204 } },
1205 #endif
1206 },
1207 };
1208 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1209
1210 /* table of devices that work with this driver */
1211 struct usb_device_id em28xx_id_table [] = {
1212 { USB_DEVICE(0xeb1a, 0x2750),
1213 .driver_info = EM2750_BOARD_UNKNOWN },
1214 { USB_DEVICE(0xeb1a, 0x2751),
1215 .driver_info = EM2750_BOARD_UNKNOWN },
1216 { USB_DEVICE(0xeb1a, 0x2800),
1217 .driver_info = EM2800_BOARD_UNKNOWN },
1218 { USB_DEVICE(0xeb1a, 0x2820),
1219 .driver_info = EM2820_BOARD_UNKNOWN },
1220 { USB_DEVICE(0xeb1a, 0x2821),
1221 .driver_info = EM2820_BOARD_PROLINK_PLAYTV_USB2 },
1222 { USB_DEVICE(0xeb1a, 0x2860),
1223 .driver_info = EM2820_BOARD_UNKNOWN },
1224 { USB_DEVICE(0xeb1a, 0x2861),
1225 .driver_info = EM2820_BOARD_UNKNOWN },
1226 { USB_DEVICE(0xeb1a, 0x2870),
1227 .driver_info = EM2820_BOARD_UNKNOWN },
1228 { USB_DEVICE(0xeb1a, 0x2881),
1229 .driver_info = EM2820_BOARD_UNKNOWN },
1230 { USB_DEVICE(0xeb1a, 0x2883),
1231 .driver_info = EM2820_BOARD_UNKNOWN },
1232 { USB_DEVICE(0xeb1a, 0xe300),
1233 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1234 { USB_DEVICE(0xeb1a, 0xe305),
1235 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1236 { USB_DEVICE(0xeb1a, 0xe310),
1237 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1238 { USB_DEVICE(0xeb1a, 0xa316),
1239 .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
1240 { USB_DEVICE(0xeb1a, 0xe320),
1241 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1242 { USB_DEVICE(0xeb1a, 0xe323),
1243 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1244 { USB_DEVICE(0xeb1a, 0xe350),
1245 .driver_info = EM2870_BOARD_KWORLD_350U },
1246 { USB_DEVICE(0xeb1a, 0xe355),
1247 .driver_info = EM2870_BOARD_KWORLD_355U },
1248 { USB_DEVICE(0xeb1a, 0x2801),
1249 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1250 { USB_DEVICE(0xeb1a, 0xe357),
1251 .driver_info = EM2870_BOARD_KWORLD_355U },
1252 { USB_DEVICE(0x0ccd, 0x0036),
1253 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1254 { USB_DEVICE(0x0ccd, 0x004c),
1255 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1256 { USB_DEVICE(0x0ccd, 0x004f),
1257 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1258 { USB_DEVICE(0x0ccd, 0x005e),
1259 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1260 { USB_DEVICE(0x0ccd, 0x0042),
1261 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1262 { USB_DEVICE(0x0ccd, 0x0043),
1263 .driver_info = EM2870_BOARD_TERRATEC_XS },
1264 { USB_DEVICE(0x0ccd, 0x0047),
1265 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1266 { USB_DEVICE(0x185b, 0x2870),
1267 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1268 { USB_DEVICE(0x185b, 0x2041),
1269 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1270 { USB_DEVICE(0x2040, 0x4200),
1271 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1272 { USB_DEVICE(0x2040, 0x4201),
1273 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1274 { USB_DEVICE(0x2040, 0x6500),
1275 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1276 { USB_DEVICE(0x2040, 0x6502),
1277 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1278 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1279 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1280 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1281 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1282 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1283 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1284 { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
1285 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1286 { USB_DEVICE(0x0438, 0xb002),
1287 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1288 { USB_DEVICE(0x2001, 0xf112),
1289 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1290 { USB_DEVICE(0x2304, 0x0207),
1291 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1292 { USB_DEVICE(0x2304, 0x0208),
1293 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1294 { USB_DEVICE(0x2304, 0x021a),
1295 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1296 { USB_DEVICE(0x2304, 0x0226),
1297 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1298 { USB_DEVICE(0x2304, 0x0227),
1299 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1300 { USB_DEVICE(0x2304, 0x023f),
1301 .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
1302 { USB_DEVICE(0x0413, 0x6023),
1303 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1304 { USB_DEVICE(0x093b, 0xa005),
1305 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1306 { },
1307 };
1308 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1309
1310 /*
1311 * EEPROM hash table for devices with generic USB IDs
1312 */
1313 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
1314 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1315 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1316 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1317 };
1318
1319 /* I2C devicelist hash table for devices with generic USB IDs */
1320 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1321 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1322 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1323 {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1324 };
1325
1326 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1327 {
1328 int rc = 0;
1329 struct em28xx *dev = ptr;
1330
1331 if (dev->tuner_type != TUNER_XC2028)
1332 return 0;
1333
1334 if (command != XC2028_TUNER_RESET)
1335 return 0;
1336
1337 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1338
1339 return rc;
1340 }
1341 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1342
1343 static void inline em28xx_set_model(struct em28xx *dev)
1344 {
1345 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1346 }
1347
1348 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1349 * this won't work for boards with generic PCI IDs
1350 */
1351 void em28xx_pre_card_setup(struct em28xx *dev)
1352 {
1353 int rc;
1354
1355 em28xx_set_model(dev);
1356
1357 em28xx_info("Found %s\n", dev->board.name);
1358
1359 /* Set the default GPO/GPIO for legacy devices */
1360 dev->reg_gpo_num = EM2880_R04_GPO;
1361 dev->reg_gpio_num = EM28XX_R08_GPIO;
1362
1363 dev->wait_after_write = 5;
1364
1365 /* Based on the Chip ID, set the device configuration */
1366 rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1367 if (rc > 0) {
1368 dev->chip_id = rc;
1369
1370 switch (dev->chip_id) {
1371 case CHIP_ID_EM2750:
1372 em28xx_info("chip ID is em2750\n");
1373 break;
1374 case CHIP_ID_EM2820:
1375 em28xx_info("chip ID is em2820\n");
1376 break;
1377 case CHIP_ID_EM2840:
1378 em28xx_info("chip ID is em2840\n");
1379 break;
1380 case CHIP_ID_EM2860:
1381 em28xx_info("chip ID is em2860\n");
1382 break;
1383 case CHIP_ID_EM2874:
1384 em28xx_info("chip ID is em2874\n");
1385 dev->reg_gpio_num = EM2874_R80_GPIO;
1386 dev->wait_after_write = 0;
1387 break;
1388 case CHIP_ID_EM2883:
1389 em28xx_info("chip ID is em2882/em2883\n");
1390 dev->wait_after_write = 0;
1391 break;
1392 default:
1393 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1394 }
1395 }
1396
1397 /* Prepopulate cached GPO register content */
1398 rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1399 if (rc >= 0)
1400 dev->reg_gpo = rc;
1401
1402 /* Those are the default values for the majority of boards
1403 Use those values if not specified otherwise at boards entry
1404 */
1405 if (!dev->board.xclk)
1406 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1407 EM28XX_XCLK_FREQUENCY_12MHZ;
1408
1409 if (!dev->board.i2c_speed)
1410 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1411 EM28XX_I2C_FREQ_100_KHZ;
1412
1413 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1414 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1415 msleep(50);
1416
1417 /* request some modules */
1418 switch (dev->model) {
1419 case EM2861_BOARD_PLEXTOR_PX_TV100U:
1420 /* FIXME guess */
1421 /* Turn on analog audio output */
1422 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1423 break;
1424 case EM2861_BOARD_KWORLD_PVRTV_300U:
1425 case EM2880_BOARD_KWORLD_DVB_305U:
1426 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1427 msleep(10);
1428 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1429 msleep(10);
1430 break;
1431 case EM2870_BOARD_COMPRO_VIDEOMATE:
1432 /* TODO: someone can do some cleanup here...
1433 not everything's needed */
1434 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1435 msleep(10);
1436 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1437 msleep(10);
1438 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1439 mdelay(70);
1440 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1441 mdelay(70);
1442 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1443 mdelay(70);
1444 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1445 mdelay(70);
1446 break;
1447 case EM2870_BOARD_TERRATEC_XS_MT2060:
1448 /* this device needs some gpio writes to get the DVB-T
1449 demod work */
1450 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1451 mdelay(70);
1452 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1453 mdelay(70);
1454 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1455 mdelay(70);
1456 break;
1457 case EM2870_BOARD_PINNACLE_PCTV_DVB:
1458 /* this device needs some gpio writes to get the
1459 DVB-T demod work */
1460 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1461 mdelay(70);
1462 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1463 mdelay(70);
1464 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1465 mdelay(70);
1466 break;
1467 case EM2820_BOARD_GADMEI_UTV310:
1468 case EM2820_BOARD_MSI_VOX_USB_2:
1469 /* enables audio for that devices */
1470 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1471 break;
1472 }
1473
1474 em28xx_gpio_set(dev, dev->board.tuner_gpio);
1475 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1476
1477 /* Unlock device */
1478 em28xx_set_mode(dev, EM28XX_SUSPEND);
1479 }
1480
1481 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1482 {
1483 memset(ctl, 0, sizeof(*ctl));
1484
1485 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1486 ctl->max_len = 64;
1487 ctl->mts = em28xx_boards[dev->model].mts_firmware;
1488
1489 switch (dev->model) {
1490 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1491 ctl->demod = XC3028_FE_ZARLINK456;
1492 break;
1493 case EM2880_BOARD_TERRATEC_HYBRID_XS:
1494 ctl->demod = XC3028_FE_ZARLINK456;
1495 break;
1496 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1497 /* djh - Not sure which demod we need here */
1498 ctl->demod = XC3028_FE_DEFAULT;
1499 break;
1500 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1501 ctl->demod = XC3028_FE_DEFAULT;
1502 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1503 break;
1504 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1505 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1506 /* FIXME: Better to specify the needed IF */
1507 ctl->demod = XC3028_FE_DEFAULT;
1508 break;
1509 default:
1510 ctl->demod = XC3028_FE_OREN538;
1511 }
1512 }
1513
1514 static void em28xx_config_tuner(struct em28xx *dev)
1515 {
1516 struct v4l2_priv_tun_config xc2028_cfg;
1517 struct tuner_setup tun_setup;
1518 struct v4l2_frequency f;
1519
1520 if (dev->tuner_type == TUNER_ABSENT)
1521 return;
1522
1523 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1524 tun_setup.type = dev->tuner_type;
1525 tun_setup.addr = dev->tuner_addr;
1526 tun_setup.tuner_callback = em28xx_tuner_callback;
1527
1528 em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
1529
1530 if (dev->tuner_type == TUNER_XC2028) {
1531 struct xc2028_ctrl ctl;
1532
1533 em28xx_setup_xc3028(dev, &ctl);
1534
1535 xc2028_cfg.tuner = TUNER_XC2028;
1536 xc2028_cfg.priv = &ctl;
1537
1538 em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
1539 }
1540
1541 /* configure tuner */
1542 f.tuner = 0;
1543 f.type = V4L2_TUNER_ANALOG_TV;
1544 f.frequency = 9076; /* just a magic number */
1545 dev->ctl_freq = f.frequency;
1546 em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
1547 }
1548
1549 static int em28xx_hint_board(struct em28xx *dev)
1550 {
1551 int i;
1552
1553 /* HINT method: EEPROM
1554 *
1555 * This method works only for boards with eeprom.
1556 * Uses a hash of all eeprom bytes. The hash should be
1557 * unique for a vendor/tuner pair.
1558 * There are a high chance that tuners for different
1559 * video standards produce different hashes.
1560 */
1561 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1562 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1563 dev->model = em28xx_eeprom_hash[i].model;
1564 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1565
1566 em28xx_errdev("Your board has no unique USB ID.\n");
1567 em28xx_errdev("A hint were successfully done, "
1568 "based on eeprom hash.\n");
1569 em28xx_errdev("This method is not 100%% failproof.\n");
1570 em28xx_errdev("If the board were missdetected, "
1571 "please email this log to:\n");
1572 em28xx_errdev("\tV4L Mailing List "
1573 " <video4linux-list@redhat.com>\n");
1574 em28xx_errdev("Board detected as %s\n",
1575 em28xx_boards[dev->model].name);
1576
1577 return 0;
1578 }
1579 }
1580
1581 /* HINT method: I2C attached devices
1582 *
1583 * This method works for all boards.
1584 * Uses a hash of i2c scanned devices.
1585 * Devices with the same i2c attached chips will
1586 * be considered equal.
1587 * This method is less precise than the eeprom one.
1588 */
1589
1590 /* user did not request i2c scanning => do it now */
1591 if (!dev->i2c_hash)
1592 em28xx_do_i2c_scan(dev);
1593
1594 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1595 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1596 dev->model = em28xx_i2c_hash[i].model;
1597 dev->tuner_type = em28xx_i2c_hash[i].tuner;
1598 em28xx_errdev("Your board has no unique USB ID.\n");
1599 em28xx_errdev("A hint were successfully done, "
1600 "based on i2c devicelist hash.\n");
1601 em28xx_errdev("This method is not 100%% failproof.\n");
1602 em28xx_errdev("If the board were missdetected, "
1603 "please email this log to:\n");
1604 em28xx_errdev("\tV4L Mailing List "
1605 " <video4linux-list@redhat.com>\n");
1606 em28xx_errdev("Board detected as %s\n",
1607 em28xx_boards[dev->model].name);
1608
1609 return 0;
1610 }
1611 }
1612
1613 em28xx_errdev("Your board has no unique USB ID and thus need a "
1614 "hint to be detected.\n");
1615 em28xx_errdev("You may try to use card=<n> insmod option to "
1616 "workaround that.\n");
1617 em28xx_errdev("Please send an email with this log to:\n");
1618 em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
1619 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1620 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1621
1622 em28xx_errdev("Here is a list of valid choices for the card=<n>"
1623 " insmod option:\n");
1624 for (i = 0; i < em28xx_bcount; i++) {
1625 em28xx_errdev(" card=%d -> %s\n",
1626 i, em28xx_boards[i].name);
1627 }
1628 return -1;
1629 }
1630
1631 /* ----------------------------------------------------------------------- */
1632 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
1633 {
1634 if (disable_ir) {
1635 ir->get_key = NULL;
1636 return ;
1637 }
1638
1639 /* detect & configure */
1640 switch (dev->model) {
1641 case (EM2800_BOARD_UNKNOWN):
1642 break;
1643 case (EM2820_BOARD_UNKNOWN):
1644 break;
1645 case (EM2800_BOARD_TERRATEC_CINERGY_200):
1646 case (EM2820_BOARD_TERRATEC_CINERGY_250):
1647 ir->ir_codes = ir_codes_em_terratec;
1648 ir->get_key = em28xx_get_key_terratec;
1649 snprintf(ir->c.name, sizeof(ir->c.name),
1650 "i2c IR (EM28XX Terratec)");
1651 break;
1652 case (EM2820_BOARD_PINNACLE_USB_2):
1653 ir->ir_codes = ir_codes_pinnacle_grey;
1654 ir->get_key = em28xx_get_key_pinnacle_usb_grey;
1655 snprintf(ir->c.name, sizeof(ir->c.name),
1656 "i2c IR (EM28XX Pinnacle PCTV)");
1657 break;
1658 case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1659 ir->ir_codes = ir_codes_hauppauge_new;
1660 ir->get_key = em28xx_get_key_em_haup;
1661 snprintf(ir->c.name, sizeof(ir->c.name),
1662 "i2c IR (EM2840 Hauppauge)");
1663 break;
1664 case (EM2820_BOARD_MSI_VOX_USB_2):
1665 break;
1666 case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1667 break;
1668 case (EM2800_BOARD_KWORLD_USB2800):
1669 break;
1670 case (EM2800_BOARD_GRABBEEX_USB2800):
1671 break;
1672 }
1673 }
1674
1675 void em28xx_card_setup(struct em28xx *dev)
1676 {
1677 em28xx_set_model(dev);
1678
1679 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1680 if (em28xx_boards[dev->model].tuner_addr)
1681 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
1682
1683 /* request some modules */
1684 switch (dev->model) {
1685 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1686 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1687 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1688 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1689 {
1690 struct tveeprom tv;
1691 #ifdef CONFIG_MODULES
1692 request_module("tveeprom");
1693 #endif
1694 /* Call first TVeeprom */
1695
1696 dev->i2c_client.addr = 0xa0 >> 1;
1697 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1698
1699 dev->tuner_type = tv.tuner_type;
1700
1701 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1702 dev->i2s_speed = 2048000;
1703 dev->board.has_msp34xx = 1;
1704 }
1705 #ifdef CONFIG_MODULES
1706 if (tv.has_ir)
1707 request_module("ir-kbd-i2c");
1708 #endif
1709 break;
1710 }
1711 case EM2820_BOARD_KWORLD_PVRTV2800RF:
1712 /* GPIO enables sound on KWORLD PVR TV 2800RF */
1713 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
1714 break;
1715 case EM2820_BOARD_UNKNOWN:
1716 case EM2800_BOARD_UNKNOWN:
1717 /*
1718 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
1719 *
1720 * This occurs because they share identical USB vendor and
1721 * product IDs.
1722 *
1723 * What we do here is look up the EEPROM hash of the K-WORLD
1724 * and if it is found then we decide that we do not have
1725 * a DIGIVOX and reset the device to the K-WORLD instead.
1726 *
1727 * This solution is only valid if they do not share eeprom
1728 * hash identities which has not been determined as yet.
1729 */
1730 case EM2880_BOARD_MSI_DIGIVOX_AD:
1731 if (!em28xx_hint_board(dev))
1732 em28xx_set_model(dev);
1733 break;
1734 }
1735
1736 if (dev->board.has_snapshot_button)
1737 em28xx_register_snapshot_button(dev);
1738
1739 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
1740 em28xx_errdev("\n\n");
1741 em28xx_errdev("The support for this board weren't "
1742 "valid yet.\n");
1743 em28xx_errdev("Please send a report of having this working\n");
1744 em28xx_errdev("not to V4L mailing list (and/or to other "
1745 "addresses)\n\n");
1746 }
1747
1748 /* Allow override tuner type by a module parameter */
1749 if (tuner >= 0)
1750 dev->tuner_type = tuner;
1751
1752 #ifdef CONFIG_MODULES
1753 /* request some modules */
1754 if (dev->board.has_msp34xx)
1755 request_module("msp3400");
1756 if (dev->board.decoder == EM28XX_SAA711X)
1757 request_module("saa7115");
1758 if (dev->board.decoder == EM28XX_TVP5150)
1759 request_module("tvp5150");
1760 if (dev->board.tuner_type != TUNER_ABSENT)
1761 request_module("tuner");
1762 #endif
1763
1764 em28xx_config_tuner(dev);
1765
1766 em28xx_ir_init(dev);
1767 }
1768
Linux kernel - Deliverables
This page took 0.1219 seconds and 5 git commands to generate.