projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
[media] em28xx: remove "not validated" flag for PCTV 330e
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/usb.h>
31 #include <media/tuner.h>
32 #include <media/msp3400.h>
33 #include <media/saa7115.h>
34 #include <media/tvp5150.h>
35 #include <media/tvaudio.h>
36 #include <media/mt9v011.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <media/v4l2-chip-ident.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
64 static unsigned long em28xx_devused;
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 /*
73 * Reset sequences for analog/digital modes
74 */
75
76 /* Reset for the most [analog] boards */
77 static struct em28xx_reg_seq default_analog[] = {
78 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
79 { -1, -1, -1, -1},
80 };
81
82 /* Reset for the most [digital] boards */
83 static struct em28xx_reg_seq default_digital[] = {
84 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
85 { -1, -1, -1, -1},
86 };
87
88 /* Board Hauppauge WinTV HVR 900 analog */
89 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
90 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
91 {0x05, 0xff, 0x10, 10},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 digital */
96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
97 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
98 {EM2880_R04_GPO, 0x04, 0x0f, 10},
99 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
100 { -1, -1, -1, -1},
101 };
102
103 /* Board Hauppauge WinTV HVR 900 (R2) digital */
104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
105 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
111 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
112 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
113 { -1, -1, -1, -1},
114 };
115
116 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
117
118 /* Board - EM2870 Kworld 355u
119 Analog - No input analog */
120
121 /* Board - EM2882 Kworld 315U digital */
122 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
123 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
124 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
125 {EM2880_R04_GPO, 0x04, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
128 { -1, -1, -1, -1},
129 };
130
131 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
132 {EM2880_R04_GPO, 0x08, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 { -1, -1, -1, -1},
137 };
138
139 static struct em28xx_reg_seq kworld_330u_analog[] = {
140 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
141 {EM2880_R04_GPO, 0x00, 0xff, 10},
142 { -1, -1, -1, -1},
143 };
144
145 static struct em28xx_reg_seq kworld_330u_digital[] = {
146 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
147 {EM2880_R04_GPO, 0x08, 0xff, 10},
148 { -1, -1, -1, -1},
149 };
150
151 /* Evga inDtube
152 GPIO0 - Enable digital power (s5h1409) - low to enable
153 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
154 GPIO4 - xc3028 reset
155 GOP3 - s5h1409 reset
156 */
157 static struct em28xx_reg_seq evga_indtube_analog[] = {
158 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
159 { -1, -1, -1, -1},
160 };
161
162 static struct em28xx_reg_seq evga_indtube_digital[] = {
163 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
164 {EM2880_R04_GPO, 0x04, 0xff, 10},
165 {EM2880_R04_GPO, 0x0c, 0xff, 1},
166 { -1, -1, -1, -1},
167 };
168
169 /*
170 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
171 * EM_GPIO_0 - currently unknown
172 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
173 * EM_GPIO_2 - currently unknown
174 * EM_GPIO_3 - currently unknown
175 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
176 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
177 * EM_GPIO_6 - currently unknown
178 * EM_GPIO_7 - currently unknown
179 */
180 static struct em28xx_reg_seq kworld_a340_digital[] = {
181 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
182 { -1, -1, -1, -1},
183 };
184
185 /* Pinnacle Hybrid Pro eb1a:2881 */
186 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
187 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
188 { -1, -1, -1, -1},
189 };
190
191 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
192 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
193 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
194 {EM2880_R04_GPO, 0x0c, 0xff, 1},
195 { -1, -1, -1, -1},
196 };
197
198 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
199 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
200 {EM2880_R04_GPO, 0x00, 0xff, 10},
201 { -1, -1, -1, -1},
202 };
203
204 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
205 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
206 {EM2880_R04_GPO, 0x08, 0xff, 10},
207 { -1, -1, -1, -1},
208 };
209
210 /* eb1a:2868 Reddo DVB-C USB TV Box
211 GPIO4 - CU1216L NIM
212 Other GPIOs seems to be don't care. */
213 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
214 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
215 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
218 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
219 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
220 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
221 {-1, -1, -1, -1},
222 };
223
224 /* Callback for the most boards */
225 static struct em28xx_reg_seq default_tuner_gpio[] = {
226 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
227 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 { -1, -1, -1, -1},
230 };
231
232 /* Mute/unmute */
233 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
234 {EM28XX_R08_GPIO, 5, 7, 10},
235 { -1, -1, -1, -1},
236 };
237
238 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
239 {EM28XX_R08_GPIO, 4, 7, 10},
240 { -1, -1, -1, -1},
241 };
242
243 static struct em28xx_reg_seq compro_mute_gpio[] = {
244 {EM28XX_R08_GPIO, 6, 7, 10},
245 { -1, -1, -1, -1},
246 };
247
248 /* Terratec AV350 */
249 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
250 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
251 { -1, -1, -1, -1},
252 };
253
254 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
255 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
256 { -1, -1, -1, -1},
257 };
258
259 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
260 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
261 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
262 { -1, -1, -1, -1},
263 };
264
265 static struct em28xx_reg_seq vc211a_enable[] = {
266 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
267 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
268 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
269 { -1, -1, -1, -1},
270 };
271
272 static struct em28xx_reg_seq dikom_dk300_digital[] = {
273 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
274 {EM2880_R04_GPO, 0x08, 0xff, 10},
275 { -1, -1, -1, -1},
276 };
277
278
279 /* Reset for the most [digital] boards */
280 static struct em28xx_reg_seq leadership_digital[] = {
281 {EM2874_R80_GPIO, 0x70, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static struct em28xx_reg_seq leadership_reset[] = {
286 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
287 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 { -1, -1, -1, -1},
290 };
291
292
293 /*
294 * Board definitions
295 */
296 struct em28xx_board em28xx_boards[] = {
297 [EM2750_BOARD_UNKNOWN] = {
298 .name = "EM2710/EM2750/EM2751 webcam grabber",
299 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
300 .tuner_type = TUNER_ABSENT,
301 .is_webcam = 1,
302 .input = { {
303 .type = EM28XX_VMUX_COMPOSITE1,
304 .vmux = 0,
305 .amux = EM28XX_AMUX_VIDEO,
306 .gpio = silvercrest_reg_seq,
307 } },
308 },
309 [EM2800_BOARD_UNKNOWN] = {
310 .name = "Unknown EM2800 video grabber",
311 .is_em2800 = 1,
312 .tda9887_conf = TDA9887_PRESENT,
313 .decoder = EM28XX_SAA711X,
314 .tuner_type = TUNER_ABSENT,
315 .input = { {
316 .type = EM28XX_VMUX_COMPOSITE1,
317 .vmux = SAA7115_COMPOSITE0,
318 .amux = EM28XX_AMUX_LINE_IN,
319 }, {
320 .type = EM28XX_VMUX_SVIDEO,
321 .vmux = SAA7115_SVIDEO3,
322 .amux = EM28XX_AMUX_LINE_IN,
323 } },
324 },
325 [EM2820_BOARD_UNKNOWN] = {
326 .name = "Unknown EM2750/28xx video grabber",
327 .tuner_type = TUNER_ABSENT,
328 .is_webcam = 1, /* To enable sensor probe */
329 },
330 [EM2750_BOARD_DLCW_130] = {
331 /* Beijing Huaqi Information Digital Technology Co., Ltd */
332 .name = "Huaqi DLCW-130",
333 .valid = EM28XX_BOARD_NOT_VALIDATED,
334 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
335 .tuner_type = TUNER_ABSENT,
336 .is_webcam = 1,
337 .input = { {
338 .type = EM28XX_VMUX_COMPOSITE1,
339 .vmux = 0,
340 .amux = EM28XX_AMUX_VIDEO,
341 } },
342 },
343 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
344 .name = "Kworld PVR TV 2800 RF",
345 .tuner_type = TUNER_TEMIC_PAL,
346 .tda9887_conf = TDA9887_PRESENT,
347 .decoder = EM28XX_SAA711X,
348 .input = { {
349 .type = EM28XX_VMUX_COMPOSITE1,
350 .vmux = SAA7115_COMPOSITE0,
351 .amux = EM28XX_AMUX_LINE_IN,
352 }, {
353 .type = EM28XX_VMUX_SVIDEO,
354 .vmux = SAA7115_SVIDEO3,
355 .amux = EM28XX_AMUX_LINE_IN,
356 } },
357 },
358 [EM2820_BOARD_GADMEI_TVR200] = {
359 .name = "Gadmei TVR200",
360 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
361 .tda9887_conf = TDA9887_PRESENT,
362 .decoder = EM28XX_SAA711X,
363 .input = { {
364 .type = EM28XX_VMUX_TELEVISION,
365 .vmux = SAA7115_COMPOSITE2,
366 .amux = EM28XX_AMUX_LINE_IN,
367 }, {
368 .type = EM28XX_VMUX_COMPOSITE1,
369 .vmux = SAA7115_COMPOSITE0,
370 .amux = EM28XX_AMUX_LINE_IN,
371 }, {
372 .type = EM28XX_VMUX_SVIDEO,
373 .vmux = SAA7115_SVIDEO3,
374 .amux = EM28XX_AMUX_LINE_IN,
375 } },
376 },
377 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
378 .name = "Terratec Cinergy 250 USB",
379 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
380 .has_ir_i2c = 1,
381 .tda9887_conf = TDA9887_PRESENT,
382 .decoder = EM28XX_SAA711X,
383 .input = { {
384 .type = EM28XX_VMUX_TELEVISION,
385 .vmux = SAA7115_COMPOSITE2,
386 .amux = EM28XX_AMUX_LINE_IN,
387 }, {
388 .type = EM28XX_VMUX_COMPOSITE1,
389 .vmux = SAA7115_COMPOSITE0,
390 .amux = EM28XX_AMUX_LINE_IN,
391 }, {
392 .type = EM28XX_VMUX_SVIDEO,
393 .vmux = SAA7115_SVIDEO3,
394 .amux = EM28XX_AMUX_LINE_IN,
395 } },
396 },
397 [EM2820_BOARD_PINNACLE_USB_2] = {
398 .name = "Pinnacle PCTV USB 2",
399 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
400 .has_ir_i2c = 1,
401 .tda9887_conf = TDA9887_PRESENT,
402 .decoder = EM28XX_SAA711X,
403 .input = { {
404 .type = EM28XX_VMUX_TELEVISION,
405 .vmux = SAA7115_COMPOSITE2,
406 .amux = EM28XX_AMUX_VIDEO,
407 }, {
408 .type = EM28XX_VMUX_COMPOSITE1,
409 .vmux = SAA7115_COMPOSITE0,
410 .amux = EM28XX_AMUX_LINE_IN,
411 }, {
412 .type = EM28XX_VMUX_SVIDEO,
413 .vmux = SAA7115_SVIDEO3,
414 .amux = EM28XX_AMUX_LINE_IN,
415 } },
416 },
417 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
418 .name = "Hauppauge WinTV USB 2",
419 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
420 .tda9887_conf = TDA9887_PRESENT |
421 TDA9887_PORT1_ACTIVE |
422 TDA9887_PORT2_ACTIVE,
423 .decoder = EM28XX_TVP5150,
424 .has_msp34xx = 1,
425 .has_ir_i2c = 1,
426 .input = { {
427 .type = EM28XX_VMUX_TELEVISION,
428 .vmux = TVP5150_COMPOSITE0,
429 .amux = MSP_INPUT_DEFAULT,
430 }, {
431 .type = EM28XX_VMUX_SVIDEO,
432 .vmux = TVP5150_SVIDEO,
433 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
434 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
435 } },
436 },
437 [EM2820_BOARD_DLINK_USB_TV] = {
438 .name = "D-Link DUB-T210 TV Tuner",
439 .valid = EM28XX_BOARD_NOT_VALIDATED,
440 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
441 .tda9887_conf = TDA9887_PRESENT,
442 .decoder = EM28XX_SAA711X,
443 .input = { {
444 .type = EM28XX_VMUX_TELEVISION,
445 .vmux = SAA7115_COMPOSITE2,
446 .amux = EM28XX_AMUX_LINE_IN,
447 }, {
448 .type = EM28XX_VMUX_COMPOSITE1,
449 .vmux = SAA7115_COMPOSITE0,
450 .amux = EM28XX_AMUX_LINE_IN,
451 }, {
452 .type = EM28XX_VMUX_SVIDEO,
453 .vmux = SAA7115_SVIDEO3,
454 .amux = EM28XX_AMUX_LINE_IN,
455 } },
456 },
457 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
458 .name = "Hercules Smart TV USB 2.0",
459 .valid = EM28XX_BOARD_NOT_VALIDATED,
460 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
461 .tda9887_conf = TDA9887_PRESENT,
462 .decoder = EM28XX_SAA711X,
463 .input = { {
464 .type = EM28XX_VMUX_TELEVISION,
465 .vmux = SAA7115_COMPOSITE2,
466 .amux = EM28XX_AMUX_LINE_IN,
467 }, {
468 .type = EM28XX_VMUX_COMPOSITE1,
469 .vmux = SAA7115_COMPOSITE0,
470 .amux = EM28XX_AMUX_LINE_IN,
471 }, {
472 .type = EM28XX_VMUX_SVIDEO,
473 .vmux = SAA7115_SVIDEO3,
474 .amux = EM28XX_AMUX_LINE_IN,
475 } },
476 },
477 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
478 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
479 .valid = EM28XX_BOARD_NOT_VALIDATED,
480 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
481 .tda9887_conf = TDA9887_PRESENT,
482 .decoder = EM28XX_SAA711X,
483 .input = { {
484 .type = EM28XX_VMUX_TELEVISION,
485 .vmux = SAA7115_COMPOSITE2,
486 .amux = EM28XX_AMUX_VIDEO,
487 }, {
488 .type = EM28XX_VMUX_COMPOSITE1,
489 .vmux = SAA7115_COMPOSITE0,
490 .amux = EM28XX_AMUX_LINE_IN,
491 }, {
492 .type = EM28XX_VMUX_SVIDEO,
493 .vmux = SAA7115_SVIDEO3,
494 .amux = EM28XX_AMUX_LINE_IN,
495 } },
496 },
497 [EM2820_BOARD_GADMEI_UTV310] = {
498 .name = "Gadmei UTV310",
499 .valid = EM28XX_BOARD_NOT_VALIDATED,
500 .tuner_type = TUNER_TNF_5335MF,
501 .tda9887_conf = TDA9887_PRESENT,
502 .decoder = EM28XX_SAA711X,
503 .input = { {
504 .type = EM28XX_VMUX_TELEVISION,
505 .vmux = SAA7115_COMPOSITE1,
506 .amux = EM28XX_AMUX_LINE_IN,
507 }, {
508 .type = EM28XX_VMUX_COMPOSITE1,
509 .vmux = SAA7115_COMPOSITE0,
510 .amux = EM28XX_AMUX_LINE_IN,
511 }, {
512 .type = EM28XX_VMUX_SVIDEO,
513 .vmux = SAA7115_SVIDEO3,
514 .amux = EM28XX_AMUX_LINE_IN,
515 } },
516 },
517 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
518 .name = "Leadtek Winfast USB II Deluxe",
519 .valid = EM28XX_BOARD_NOT_VALIDATED,
520 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
521 .has_ir_i2c = 1,
522 .tvaudio_addr = 0x58,
523 .tda9887_conf = TDA9887_PRESENT |
524 TDA9887_PORT2_ACTIVE |
525 TDA9887_QSS,
526 .decoder = EM28XX_SAA711X,
527 .adecoder = EM28XX_TVAUDIO,
528 .input = { {
529 .type = EM28XX_VMUX_TELEVISION,
530 .vmux = SAA7115_COMPOSITE4,
531 .amux = EM28XX_AMUX_AUX,
532 }, {
533 .type = EM28XX_VMUX_COMPOSITE1,
534 .vmux = SAA7115_COMPOSITE5,
535 .amux = EM28XX_AMUX_LINE_IN,
536 }, {
537 .type = EM28XX_VMUX_SVIDEO,
538 .vmux = SAA7115_SVIDEO3,
539 .amux = EM28XX_AMUX_LINE_IN,
540 } },
541 .radio = {
542 .type = EM28XX_RADIO,
543 .amux = EM28XX_AMUX_AUX,
544 }
545 },
546 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
547 .name = "Videology 20K14XUSB USB2.0",
548 .valid = EM28XX_BOARD_NOT_VALIDATED,
549 .tuner_type = TUNER_ABSENT,
550 .is_webcam = 1,
551 .input = { {
552 .type = EM28XX_VMUX_COMPOSITE1,
553 .vmux = 0,
554 .amux = EM28XX_AMUX_VIDEO,
555 } },
556 },
557 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
558 .name = "Silvercrest Webcam 1.3mpix",
559 .tuner_type = TUNER_ABSENT,
560 .is_webcam = 1,
561 .input = { {
562 .type = EM28XX_VMUX_COMPOSITE1,
563 .vmux = 0,
564 .amux = EM28XX_AMUX_VIDEO,
565 .gpio = silvercrest_reg_seq,
566 } },
567 },
568 [EM2821_BOARD_SUPERCOMP_USB_2] = {
569 .name = "Supercomp USB 2.0 TV",
570 .valid = EM28XX_BOARD_NOT_VALIDATED,
571 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
572 .tda9887_conf = TDA9887_PRESENT |
573 TDA9887_PORT1_ACTIVE |
574 TDA9887_PORT2_ACTIVE,
575 .decoder = EM28XX_SAA711X,
576 .input = { {
577 .type = EM28XX_VMUX_TELEVISION,
578 .vmux = SAA7115_COMPOSITE2,
579 .amux = EM28XX_AMUX_LINE_IN,
580 }, {
581 .type = EM28XX_VMUX_COMPOSITE1,
582 .vmux = SAA7115_COMPOSITE0,
583 .amux = EM28XX_AMUX_VIDEO,
584 }, {
585 .type = EM28XX_VMUX_SVIDEO,
586 .vmux = SAA7115_SVIDEO3,
587 .amux = EM28XX_AMUX_LINE_IN,
588 } },
589 },
590 [EM2821_BOARD_USBGEAR_VD204] = {
591 .name = "Usbgear VD204v9",
592 .valid = EM28XX_BOARD_NOT_VALIDATED,
593 .tuner_type = TUNER_ABSENT, /* Capture only device */
594 .decoder = EM28XX_SAA711X,
595 .input = { {
596 .type = EM28XX_VMUX_COMPOSITE1,
597 .vmux = SAA7115_COMPOSITE0,
598 .amux = EM28XX_AMUX_LINE_IN,
599 }, {
600 .type = EM28XX_VMUX_SVIDEO,
601 .vmux = SAA7115_SVIDEO3,
602 .amux = EM28XX_AMUX_LINE_IN,
603 } },
604 },
605 [EM2860_BOARD_NETGMBH_CAM] = {
606 /* Beijing Huaqi Information Digital Technology Co., Ltd */
607 .name = "NetGMBH Cam",
608 .valid = EM28XX_BOARD_NOT_VALIDATED,
609 .tuner_type = TUNER_ABSENT,
610 .is_webcam = 1,
611 .input = { {
612 .type = EM28XX_VMUX_COMPOSITE1,
613 .vmux = 0,
614 .amux = EM28XX_AMUX_VIDEO,
615 } },
616 },
617 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
618 .name = "Typhoon DVD Maker",
619 .decoder = EM28XX_SAA711X,
620 .tuner_type = TUNER_ABSENT, /* Capture only device */
621 .input = { {
622 .type = EM28XX_VMUX_COMPOSITE1,
623 .vmux = SAA7115_COMPOSITE0,
624 .amux = EM28XX_AMUX_LINE_IN,
625 }, {
626 .type = EM28XX_VMUX_SVIDEO,
627 .vmux = SAA7115_SVIDEO3,
628 .amux = EM28XX_AMUX_LINE_IN,
629 } },
630 },
631 [EM2860_BOARD_GADMEI_UTV330] = {
632 .name = "Gadmei UTV330",
633 .valid = EM28XX_BOARD_NOT_VALIDATED,
634 .tuner_type = TUNER_TNF_5335MF,
635 .tda9887_conf = TDA9887_PRESENT,
636 .decoder = EM28XX_SAA711X,
637 .input = { {
638 .type = EM28XX_VMUX_TELEVISION,
639 .vmux = SAA7115_COMPOSITE2,
640 .amux = EM28XX_AMUX_VIDEO,
641 }, {
642 .type = EM28XX_VMUX_COMPOSITE1,
643 .vmux = SAA7115_COMPOSITE0,
644 .amux = EM28XX_AMUX_LINE_IN,
645 }, {
646 .type = EM28XX_VMUX_SVIDEO,
647 .vmux = SAA7115_SVIDEO3,
648 .amux = EM28XX_AMUX_LINE_IN,
649 } },
650 },
651 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
652 .name = "Gadmei UTV330+",
653 .tuner_type = TUNER_TNF_5335MF,
654 .tda9887_conf = TDA9887_PRESENT,
655 .ir_codes = RC_MAP_GADMEI_RM008Z,
656 .decoder = EM28XX_SAA711X,
657 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
658 .input = { {
659 .type = EM28XX_VMUX_TELEVISION,
660 .vmux = SAA7115_COMPOSITE2,
661 .amux = EM28XX_AMUX_VIDEO,
662 }, {
663 .type = EM28XX_VMUX_COMPOSITE1,
664 .vmux = SAA7115_COMPOSITE0,
665 .amux = EM28XX_AMUX_LINE_IN,
666 }, {
667 .type = EM28XX_VMUX_SVIDEO,
668 .vmux = SAA7115_SVIDEO3,
669 .amux = EM28XX_AMUX_LINE_IN,
670 } },
671 },
672 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
673 .name = "Terratec Cinergy A Hybrid XS",
674 .valid = EM28XX_BOARD_NOT_VALIDATED,
675 .tuner_type = TUNER_XC2028,
676 .tuner_gpio = default_tuner_gpio,
677 .decoder = EM28XX_TVP5150,
678
679 .input = { {
680 .type = EM28XX_VMUX_TELEVISION,
681 .vmux = TVP5150_COMPOSITE0,
682 .amux = EM28XX_AMUX_VIDEO,
683 .gpio = hauppauge_wintv_hvr_900_analog,
684 }, {
685 .type = EM28XX_VMUX_COMPOSITE1,
686 .vmux = TVP5150_COMPOSITE1,
687 .amux = EM28XX_AMUX_LINE_IN,
688 .gpio = hauppauge_wintv_hvr_900_analog,
689 }, {
690 .type = EM28XX_VMUX_SVIDEO,
691 .vmux = TVP5150_SVIDEO,
692 .amux = EM28XX_AMUX_LINE_IN,
693 .gpio = hauppauge_wintv_hvr_900_analog,
694 } },
695 },
696 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
697 .name = "KWorld PVRTV 300U",
698 .valid = EM28XX_BOARD_NOT_VALIDATED,
699 .tuner_type = TUNER_XC2028,
700 .tuner_gpio = default_tuner_gpio,
701 .decoder = EM28XX_TVP5150,
702 .input = { {
703 .type = EM28XX_VMUX_TELEVISION,
704 .vmux = TVP5150_COMPOSITE0,
705 .amux = EM28XX_AMUX_VIDEO,
706 }, {
707 .type = EM28XX_VMUX_COMPOSITE1,
708 .vmux = TVP5150_COMPOSITE1,
709 .amux = EM28XX_AMUX_LINE_IN,
710 }, {
711 .type = EM28XX_VMUX_SVIDEO,
712 .vmux = TVP5150_SVIDEO,
713 .amux = EM28XX_AMUX_LINE_IN,
714 } },
715 },
716 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
717 .name = "Yakumo MovieMixer",
718 .tuner_type = TUNER_ABSENT, /* Capture only device */
719 .decoder = EM28XX_TVP5150,
720 .input = { {
721 .type = EM28XX_VMUX_TELEVISION,
722 .vmux = TVP5150_COMPOSITE0,
723 .amux = EM28XX_AMUX_VIDEO,
724 }, {
725 .type = EM28XX_VMUX_COMPOSITE1,
726 .vmux = TVP5150_COMPOSITE1,
727 .amux = EM28XX_AMUX_LINE_IN,
728 }, {
729 .type = EM28XX_VMUX_SVIDEO,
730 .vmux = TVP5150_SVIDEO,
731 .amux = EM28XX_AMUX_LINE_IN,
732 } },
733 },
734 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
735 .name = "EM2860/TVP5150 Reference Design",
736 .tuner_type = TUNER_ABSENT, /* Capture only device */
737 .decoder = EM28XX_TVP5150,
738 .input = { {
739 .type = EM28XX_VMUX_COMPOSITE1,
740 .vmux = TVP5150_COMPOSITE1,
741 .amux = EM28XX_AMUX_LINE_IN,
742 }, {
743 .type = EM28XX_VMUX_SVIDEO,
744 .vmux = TVP5150_SVIDEO,
745 .amux = EM28XX_AMUX_LINE_IN,
746 } },
747 },
748 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
749 .name = "Plextor ConvertX PX-TV100U",
750 .tuner_type = TUNER_TNF_5335MF,
751 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
752 EM28XX_XCLK_FREQUENCY_12MHZ,
753 .tda9887_conf = TDA9887_PRESENT,
754 .decoder = EM28XX_TVP5150,
755 .has_msp34xx = 1,
756 .input = { {
757 .type = EM28XX_VMUX_TELEVISION,
758 .vmux = TVP5150_COMPOSITE0,
759 .amux = EM28XX_AMUX_LINE_IN,
760 .gpio = pinnacle_hybrid_pro_analog,
761 }, {
762 .type = EM28XX_VMUX_COMPOSITE1,
763 .vmux = TVP5150_COMPOSITE1,
764 .amux = EM28XX_AMUX_LINE_IN,
765 .gpio = pinnacle_hybrid_pro_analog,
766 }, {
767 .type = EM28XX_VMUX_SVIDEO,
768 .vmux = TVP5150_SVIDEO,
769 .amux = EM28XX_AMUX_LINE_IN,
770 .gpio = pinnacle_hybrid_pro_analog,
771 } },
772 },
773
774 /* Those boards with em2870 are DVB Only*/
775
776 [EM2870_BOARD_TERRATEC_XS] = {
777 .name = "Terratec Cinergy T XS",
778 .valid = EM28XX_BOARD_NOT_VALIDATED,
779 .tuner_type = TUNER_XC2028,
780 .tuner_gpio = default_tuner_gpio,
781 },
782 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
783 .name = "Terratec Cinergy T XS (MT2060)",
784 .valid = EM28XX_BOARD_NOT_VALIDATED,
785 .tuner_type = TUNER_ABSENT, /* MT2060 */
786 },
787 [EM2870_BOARD_KWORLD_350U] = {
788 .name = "Kworld 350 U DVB-T",
789 .valid = EM28XX_BOARD_NOT_VALIDATED,
790 .tuner_type = TUNER_XC2028,
791 .tuner_gpio = default_tuner_gpio,
792 },
793 [EM2870_BOARD_KWORLD_355U] = {
794 .name = "Kworld 355 U DVB-T",
795 .valid = EM28XX_BOARD_NOT_VALIDATED,
796 },
797 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
798 .name = "Pinnacle PCTV DVB-T",
799 .valid = EM28XX_BOARD_NOT_VALIDATED,
800 .tuner_type = TUNER_ABSENT, /* MT2060 */
801 /* djh - I have serious doubts this is right... */
802 .xclk = EM28XX_XCLK_IR_RC5_MODE |
803 EM28XX_XCLK_FREQUENCY_10MHZ,
804 },
805 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
806 .name = "Compro, VideoMate U3",
807 .valid = EM28XX_BOARD_NOT_VALIDATED,
808 .tuner_type = TUNER_ABSENT, /* MT2060 */
809 },
810
811 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
812 .name = "Terratec Hybrid XS Secam",
813 .has_msp34xx = 1,
814 .tuner_type = TUNER_XC2028,
815 .tuner_gpio = default_tuner_gpio,
816 .decoder = EM28XX_TVP5150,
817 .has_dvb = 1,
818 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
819 .input = { {
820 .type = EM28XX_VMUX_TELEVISION,
821 .vmux = TVP5150_COMPOSITE0,
822 .amux = EM28XX_AMUX_VIDEO,
823 .gpio = terratec_cinergy_USB_XS_FR_analog,
824 }, {
825 .type = EM28XX_VMUX_COMPOSITE1,
826 .vmux = TVP5150_COMPOSITE1,
827 .amux = EM28XX_AMUX_LINE_IN,
828 .gpio = terratec_cinergy_USB_XS_FR_analog,
829 }, {
830 .type = EM28XX_VMUX_SVIDEO,
831 .vmux = TVP5150_SVIDEO,
832 .amux = EM28XX_AMUX_LINE_IN,
833 .gpio = terratec_cinergy_USB_XS_FR_analog,
834 } },
835 },
836 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
837 .name = "Hauppauge WinTV HVR 900",
838 .tda9887_conf = TDA9887_PRESENT,
839 .tuner_type = TUNER_XC2028,
840 .tuner_gpio = default_tuner_gpio,
841 .mts_firmware = 1,
842 .has_dvb = 1,
843 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
844 .ir_codes = RC_MAP_HAUPPAUGE,
845 .decoder = EM28XX_TVP5150,
846 .input = { {
847 .type = EM28XX_VMUX_TELEVISION,
848 .vmux = TVP5150_COMPOSITE0,
849 .amux = EM28XX_AMUX_VIDEO,
850 .gpio = hauppauge_wintv_hvr_900_analog,
851 }, {
852 .type = EM28XX_VMUX_COMPOSITE1,
853 .vmux = TVP5150_COMPOSITE1,
854 .amux = EM28XX_AMUX_LINE_IN,
855 .gpio = hauppauge_wintv_hvr_900_analog,
856 }, {
857 .type = EM28XX_VMUX_SVIDEO,
858 .vmux = TVP5150_SVIDEO,
859 .amux = EM28XX_AMUX_LINE_IN,
860 .gpio = hauppauge_wintv_hvr_900_analog,
861 } },
862 },
863 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
864 .name = "Hauppauge WinTV HVR 900 (R2)",
865 .tda9887_conf = TDA9887_PRESENT,
866 .tuner_type = TUNER_XC2028,
867 .tuner_gpio = default_tuner_gpio,
868 .mts_firmware = 1,
869 .has_dvb = 1,
870 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
871 .ir_codes = RC_MAP_HAUPPAUGE,
872 .decoder = EM28XX_TVP5150,
873 .input = { {
874 .type = EM28XX_VMUX_TELEVISION,
875 .vmux = TVP5150_COMPOSITE0,
876 .amux = EM28XX_AMUX_VIDEO,
877 .gpio = hauppauge_wintv_hvr_900_analog,
878 }, {
879 .type = EM28XX_VMUX_COMPOSITE1,
880 .vmux = TVP5150_COMPOSITE1,
881 .amux = EM28XX_AMUX_LINE_IN,
882 .gpio = hauppauge_wintv_hvr_900_analog,
883 }, {
884 .type = EM28XX_VMUX_SVIDEO,
885 .vmux = TVP5150_SVIDEO,
886 .amux = EM28XX_AMUX_LINE_IN,
887 .gpio = hauppauge_wintv_hvr_900_analog,
888 } },
889 },
890 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
891 .name = "Hauppauge WinTV HVR 850",
892 .tuner_type = TUNER_XC2028,
893 .tuner_gpio = default_tuner_gpio,
894 .mts_firmware = 1,
895 .has_dvb = 1,
896 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
897 .ir_codes = RC_MAP_HAUPPAUGE,
898 .decoder = EM28XX_TVP5150,
899 .input = { {
900 .type = EM28XX_VMUX_TELEVISION,
901 .vmux = TVP5150_COMPOSITE0,
902 .amux = EM28XX_AMUX_VIDEO,
903 .gpio = hauppauge_wintv_hvr_900_analog,
904 }, {
905 .type = EM28XX_VMUX_COMPOSITE1,
906 .vmux = TVP5150_COMPOSITE1,
907 .amux = EM28XX_AMUX_LINE_IN,
908 .gpio = hauppauge_wintv_hvr_900_analog,
909 }, {
910 .type = EM28XX_VMUX_SVIDEO,
911 .vmux = TVP5150_SVIDEO,
912 .amux = EM28XX_AMUX_LINE_IN,
913 .gpio = hauppauge_wintv_hvr_900_analog,
914 } },
915 },
916 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
917 .name = "Hauppauge WinTV HVR 950",
918 .tuner_type = TUNER_XC2028,
919 .tuner_gpio = default_tuner_gpio,
920 .mts_firmware = 1,
921 .has_dvb = 1,
922 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
923 .ir_codes = RC_MAP_HAUPPAUGE,
924 .decoder = EM28XX_TVP5150,
925 .input = { {
926 .type = EM28XX_VMUX_TELEVISION,
927 .vmux = TVP5150_COMPOSITE0,
928 .amux = EM28XX_AMUX_VIDEO,
929 .gpio = hauppauge_wintv_hvr_900_analog,
930 }, {
931 .type = EM28XX_VMUX_COMPOSITE1,
932 .vmux = TVP5150_COMPOSITE1,
933 .amux = EM28XX_AMUX_LINE_IN,
934 .gpio = hauppauge_wintv_hvr_900_analog,
935 }, {
936 .type = EM28XX_VMUX_SVIDEO,
937 .vmux = TVP5150_SVIDEO,
938 .amux = EM28XX_AMUX_LINE_IN,
939 .gpio = hauppauge_wintv_hvr_900_analog,
940 } },
941 },
942 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
943 .name = "Pinnacle PCTV HD Pro Stick",
944 .tuner_type = TUNER_XC2028,
945 .tuner_gpio = default_tuner_gpio,
946 .mts_firmware = 1,
947 .has_dvb = 1,
948 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
949 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
950 .decoder = EM28XX_TVP5150,
951 .input = { {
952 .type = EM28XX_VMUX_TELEVISION,
953 .vmux = TVP5150_COMPOSITE0,
954 .amux = EM28XX_AMUX_VIDEO,
955 .gpio = hauppauge_wintv_hvr_900_analog,
956 }, {
957 .type = EM28XX_VMUX_COMPOSITE1,
958 .vmux = TVP5150_COMPOSITE1,
959 .amux = EM28XX_AMUX_LINE_IN,
960 .gpio = hauppauge_wintv_hvr_900_analog,
961 }, {
962 .type = EM28XX_VMUX_SVIDEO,
963 .vmux = TVP5150_SVIDEO,
964 .amux = EM28XX_AMUX_LINE_IN,
965 .gpio = hauppauge_wintv_hvr_900_analog,
966 } },
967 },
968 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
969 .name = "AMD ATI TV Wonder HD 600",
970 .tuner_type = TUNER_XC2028,
971 .tuner_gpio = default_tuner_gpio,
972 .mts_firmware = 1,
973 .has_dvb = 1,
974 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
975 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
976 .decoder = EM28XX_TVP5150,
977 .input = { {
978 .type = EM28XX_VMUX_TELEVISION,
979 .vmux = TVP5150_COMPOSITE0,
980 .amux = EM28XX_AMUX_VIDEO,
981 .gpio = hauppauge_wintv_hvr_900_analog,
982 }, {
983 .type = EM28XX_VMUX_COMPOSITE1,
984 .vmux = TVP5150_COMPOSITE1,
985 .amux = EM28XX_AMUX_LINE_IN,
986 .gpio = hauppauge_wintv_hvr_900_analog,
987 }, {
988 .type = EM28XX_VMUX_SVIDEO,
989 .vmux = TVP5150_SVIDEO,
990 .amux = EM28XX_AMUX_LINE_IN,
991 .gpio = hauppauge_wintv_hvr_900_analog,
992 } },
993 },
994 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
995 .name = "Terratec Hybrid XS",
996 .tuner_type = TUNER_XC2028,
997 .tuner_gpio = default_tuner_gpio,
998 .decoder = EM28XX_TVP5150,
999 .has_dvb = 1,
1000 .dvb_gpio = default_digital,
1001 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1002 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1003 .input = { {
1004 .type = EM28XX_VMUX_TELEVISION,
1005 .vmux = TVP5150_COMPOSITE0,
1006 .amux = EM28XX_AMUX_VIDEO,
1007 .gpio = default_analog,
1008 }, {
1009 .type = EM28XX_VMUX_COMPOSITE1,
1010 .vmux = TVP5150_COMPOSITE1,
1011 .amux = EM28XX_AMUX_LINE_IN,
1012 .gpio = default_analog,
1013 }, {
1014 .type = EM28XX_VMUX_SVIDEO,
1015 .vmux = TVP5150_SVIDEO,
1016 .amux = EM28XX_AMUX_LINE_IN,
1017 .gpio = default_analog,
1018 } },
1019 },
1020 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1021 as Prodigy XS with a different PID, let's keep it separated for now
1022 maybe we'll need it lateron */
1023 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1024 .name = "Terratec Prodigy XS",
1025 .tuner_type = TUNER_XC2028,
1026 .tuner_gpio = default_tuner_gpio,
1027 .decoder = EM28XX_TVP5150,
1028 .input = { {
1029 .type = EM28XX_VMUX_TELEVISION,
1030 .vmux = TVP5150_COMPOSITE0,
1031 .amux = EM28XX_AMUX_VIDEO,
1032 .gpio = hauppauge_wintv_hvr_900_analog,
1033 }, {
1034 .type = EM28XX_VMUX_COMPOSITE1,
1035 .vmux = TVP5150_COMPOSITE1,
1036 .amux = EM28XX_AMUX_LINE_IN,
1037 .gpio = hauppauge_wintv_hvr_900_analog,
1038 }, {
1039 .type = EM28XX_VMUX_SVIDEO,
1040 .vmux = TVP5150_SVIDEO,
1041 .amux = EM28XX_AMUX_LINE_IN,
1042 .gpio = hauppauge_wintv_hvr_900_analog,
1043 } },
1044 },
1045 [EM2820_BOARD_MSI_VOX_USB_2] = {
1046 .name = "MSI VOX USB 2.0",
1047 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1048 .tda9887_conf = TDA9887_PRESENT |
1049 TDA9887_PORT1_ACTIVE |
1050 TDA9887_PORT2_ACTIVE,
1051 .max_range_640_480 = 1,
1052 .decoder = EM28XX_SAA711X,
1053 .input = { {
1054 .type = EM28XX_VMUX_TELEVISION,
1055 .vmux = SAA7115_COMPOSITE4,
1056 .amux = EM28XX_AMUX_VIDEO,
1057 }, {
1058 .type = EM28XX_VMUX_COMPOSITE1,
1059 .vmux = SAA7115_COMPOSITE0,
1060 .amux = EM28XX_AMUX_LINE_IN,
1061 }, {
1062 .type = EM28XX_VMUX_SVIDEO,
1063 .vmux = SAA7115_SVIDEO3,
1064 .amux = EM28XX_AMUX_LINE_IN,
1065 } },
1066 },
1067 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1068 .name = "Terratec Cinergy 200 USB",
1069 .is_em2800 = 1,
1070 .has_ir_i2c = 1,
1071 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1072 .tda9887_conf = TDA9887_PRESENT,
1073 .decoder = EM28XX_SAA711X,
1074 .input = { {
1075 .type = EM28XX_VMUX_TELEVISION,
1076 .vmux = SAA7115_COMPOSITE2,
1077 .amux = EM28XX_AMUX_VIDEO,
1078 }, {
1079 .type = EM28XX_VMUX_COMPOSITE1,
1080 .vmux = SAA7115_COMPOSITE0,
1081 .amux = EM28XX_AMUX_LINE_IN,
1082 }, {
1083 .type = EM28XX_VMUX_SVIDEO,
1084 .vmux = SAA7115_SVIDEO3,
1085 .amux = EM28XX_AMUX_LINE_IN,
1086 } },
1087 },
1088 [EM2800_BOARD_GRABBEEX_USB2800] = {
1089 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1090 .is_em2800 = 1,
1091 .decoder = EM28XX_SAA711X,
1092 .tuner_type = TUNER_ABSENT, /* capture only board */
1093 .input = { {
1094 .type = EM28XX_VMUX_COMPOSITE1,
1095 .vmux = SAA7115_COMPOSITE0,
1096 .amux = EM28XX_AMUX_LINE_IN,
1097 }, {
1098 .type = EM28XX_VMUX_SVIDEO,
1099 .vmux = SAA7115_SVIDEO3,
1100 .amux = EM28XX_AMUX_LINE_IN,
1101 } },
1102 },
1103 [EM2800_BOARD_VC211A] = {
1104 .name = "Actionmaster/LinXcel/Digitus VC211A",
1105 .is_em2800 = 1,
1106 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1107 .decoder = EM28XX_SAA711X,
1108 .input = { {
1109 .type = EM28XX_VMUX_COMPOSITE1,
1110 .vmux = SAA7115_COMPOSITE0,
1111 .amux = EM28XX_AMUX_LINE_IN,
1112 .gpio = vc211a_enable,
1113 }, {
1114 .type = EM28XX_VMUX_SVIDEO,
1115 .vmux = SAA7115_SVIDEO3,
1116 .amux = EM28XX_AMUX_LINE_IN,
1117 .gpio = vc211a_enable,
1118 } },
1119 },
1120 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1121 .name = "Leadtek Winfast USB II",
1122 .is_em2800 = 1,
1123 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1124 .tda9887_conf = TDA9887_PRESENT,
1125 .decoder = EM28XX_SAA711X,
1126 .input = { {
1127 .type = EM28XX_VMUX_TELEVISION,
1128 .vmux = SAA7115_COMPOSITE2,
1129 .amux = EM28XX_AMUX_VIDEO,
1130 }, {
1131 .type = EM28XX_VMUX_COMPOSITE1,
1132 .vmux = SAA7115_COMPOSITE0,
1133 .amux = EM28XX_AMUX_LINE_IN,
1134 }, {
1135 .type = EM28XX_VMUX_SVIDEO,
1136 .vmux = SAA7115_SVIDEO3,
1137 .amux = EM28XX_AMUX_LINE_IN,
1138 } },
1139 },
1140 [EM2800_BOARD_KWORLD_USB2800] = {
1141 .name = "Kworld USB2800",
1142 .is_em2800 = 1,
1143 .tuner_type = TUNER_PHILIPS_FCV1236D,
1144 .tda9887_conf = TDA9887_PRESENT,
1145 .decoder = EM28XX_SAA711X,
1146 .input = { {
1147 .type = EM28XX_VMUX_TELEVISION,
1148 .vmux = SAA7115_COMPOSITE2,
1149 .amux = EM28XX_AMUX_VIDEO,
1150 }, {
1151 .type = EM28XX_VMUX_COMPOSITE1,
1152 .vmux = SAA7115_COMPOSITE0,
1153 .amux = EM28XX_AMUX_LINE_IN,
1154 }, {
1155 .type = EM28XX_VMUX_SVIDEO,
1156 .vmux = SAA7115_SVIDEO3,
1157 .amux = EM28XX_AMUX_LINE_IN,
1158 } },
1159 },
1160 [EM2820_BOARD_PINNACLE_DVC_90] = {
1161 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1162 "/ Kworld DVD Maker 2",
1163 .tuner_type = TUNER_ABSENT, /* capture only board */
1164 .decoder = EM28XX_SAA711X,
1165 .input = { {
1166 .type = EM28XX_VMUX_COMPOSITE1,
1167 .vmux = SAA7115_COMPOSITE0,
1168 .amux = EM28XX_AMUX_LINE_IN,
1169 }, {
1170 .type = EM28XX_VMUX_SVIDEO,
1171 .vmux = SAA7115_SVIDEO3,
1172 .amux = EM28XX_AMUX_LINE_IN,
1173 } },
1174 },
1175 [EM2800_BOARD_VGEAR_POCKETTV] = {
1176 .name = "V-Gear PocketTV",
1177 .is_em2800 = 1,
1178 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1179 .tda9887_conf = TDA9887_PRESENT,
1180 .decoder = EM28XX_SAA711X,
1181 .input = { {
1182 .type = EM28XX_VMUX_TELEVISION,
1183 .vmux = SAA7115_COMPOSITE2,
1184 .amux = EM28XX_AMUX_VIDEO,
1185 }, {
1186 .type = EM28XX_VMUX_COMPOSITE1,
1187 .vmux = SAA7115_COMPOSITE0,
1188 .amux = EM28XX_AMUX_LINE_IN,
1189 }, {
1190 .type = EM28XX_VMUX_SVIDEO,
1191 .vmux = SAA7115_SVIDEO3,
1192 .amux = EM28XX_AMUX_LINE_IN,
1193 } },
1194 },
1195 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1196 .name = "Pixelview PlayTV Box 4 USB 2.0",
1197 .tda9887_conf = TDA9887_PRESENT,
1198 .tuner_type = TUNER_YMEC_TVF_5533MF,
1199 .decoder = EM28XX_SAA711X,
1200 .input = { {
1201 .type = EM28XX_VMUX_TELEVISION,
1202 .vmux = SAA7115_COMPOSITE2,
1203 .amux = EM28XX_AMUX_VIDEO,
1204 .aout = EM28XX_AOUT_MONO | /* I2S */
1205 EM28XX_AOUT_MASTER, /* Line out pin */
1206 }, {
1207 .type = EM28XX_VMUX_COMPOSITE1,
1208 .vmux = SAA7115_COMPOSITE0,
1209 .amux = EM28XX_AMUX_LINE_IN,
1210 }, {
1211 .type = EM28XX_VMUX_SVIDEO,
1212 .vmux = SAA7115_SVIDEO3,
1213 .amux = EM28XX_AMUX_LINE_IN,
1214 } },
1215 },
1216 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1217 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1218 .has_snapshot_button = 1,
1219 .tda9887_conf = TDA9887_PRESENT,
1220 .tuner_type = TUNER_YMEC_TVF_5533MF,
1221 .decoder = EM28XX_SAA711X,
1222 .input = { {
1223 .type = EM28XX_VMUX_TELEVISION,
1224 .vmux = SAA7115_COMPOSITE2,
1225 .amux = EM28XX_AMUX_VIDEO,
1226 .aout = EM28XX_AOUT_MONO | /* I2S */
1227 EM28XX_AOUT_MASTER, /* Line out pin */
1228 }, {
1229 .type = EM28XX_VMUX_COMPOSITE1,
1230 .vmux = SAA7115_COMPOSITE0,
1231 .amux = EM28XX_AMUX_LINE_IN,
1232 }, {
1233 .type = EM28XX_VMUX_SVIDEO,
1234 .vmux = SAA7115_SVIDEO3,
1235 .amux = EM28XX_AMUX_LINE_IN,
1236 } },
1237 },
1238 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1239 .name = "EM2860/SAA711X Reference Design",
1240 .has_snapshot_button = 1,
1241 .tuner_type = TUNER_ABSENT,
1242 .decoder = EM28XX_SAA711X,
1243 .input = { {
1244 .type = EM28XX_VMUX_SVIDEO,
1245 .vmux = SAA7115_SVIDEO3,
1246 }, {
1247 .type = EM28XX_VMUX_COMPOSITE1,
1248 .vmux = SAA7115_COMPOSITE0,
1249 } },
1250 },
1251
1252 [EM2874_LEADERSHIP_ISDBT] = {
1253 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1254 EM28XX_I2C_CLK_WAIT_ENABLE |
1255 EM28XX_I2C_FREQ_100_KHZ,
1256 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1257 .name = "EM2874 Leadership ISDBT",
1258 .tuner_type = TUNER_ABSENT,
1259 .tuner_gpio = leadership_reset,
1260 .dvb_gpio = leadership_digital,
1261 .has_dvb = 1,
1262 },
1263
1264 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1265 .name = "MSI DigiVox A/D",
1266 .valid = EM28XX_BOARD_NOT_VALIDATED,
1267 .tuner_type = TUNER_XC2028,
1268 .tuner_gpio = default_tuner_gpio,
1269 .decoder = EM28XX_TVP5150,
1270 .input = { {
1271 .type = EM28XX_VMUX_TELEVISION,
1272 .vmux = TVP5150_COMPOSITE0,
1273 .amux = EM28XX_AMUX_VIDEO,
1274 .gpio = em2880_msi_digivox_ad_analog,
1275 }, {
1276 .type = EM28XX_VMUX_COMPOSITE1,
1277 .vmux = TVP5150_COMPOSITE1,
1278 .amux = EM28XX_AMUX_LINE_IN,
1279 .gpio = em2880_msi_digivox_ad_analog,
1280 }, {
1281 .type = EM28XX_VMUX_SVIDEO,
1282 .vmux = TVP5150_SVIDEO,
1283 .amux = EM28XX_AMUX_LINE_IN,
1284 .gpio = em2880_msi_digivox_ad_analog,
1285 } },
1286 },
1287 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1288 .name = "MSI DigiVox A/D II",
1289 .valid = EM28XX_BOARD_NOT_VALIDATED,
1290 .tuner_type = TUNER_XC2028,
1291 .tuner_gpio = default_tuner_gpio,
1292 .decoder = EM28XX_TVP5150,
1293 .input = { {
1294 .type = EM28XX_VMUX_TELEVISION,
1295 .vmux = TVP5150_COMPOSITE0,
1296 .amux = EM28XX_AMUX_VIDEO,
1297 .gpio = em2880_msi_digivox_ad_analog,
1298 }, {
1299 .type = EM28XX_VMUX_COMPOSITE1,
1300 .vmux = TVP5150_COMPOSITE1,
1301 .amux = EM28XX_AMUX_LINE_IN,
1302 .gpio = em2880_msi_digivox_ad_analog,
1303 }, {
1304 .type = EM28XX_VMUX_SVIDEO,
1305 .vmux = TVP5150_SVIDEO,
1306 .amux = EM28XX_AMUX_LINE_IN,
1307 .gpio = em2880_msi_digivox_ad_analog,
1308 } },
1309 },
1310 [EM2880_BOARD_KWORLD_DVB_305U] = {
1311 .name = "KWorld DVB-T 305U",
1312 .valid = EM28XX_BOARD_NOT_VALIDATED,
1313 .tuner_type = TUNER_XC2028,
1314 .tuner_gpio = default_tuner_gpio,
1315 .decoder = EM28XX_TVP5150,
1316 .input = { {
1317 .type = EM28XX_VMUX_TELEVISION,
1318 .vmux = TVP5150_COMPOSITE0,
1319 .amux = EM28XX_AMUX_VIDEO,
1320 }, {
1321 .type = EM28XX_VMUX_COMPOSITE1,
1322 .vmux = TVP5150_COMPOSITE1,
1323 .amux = EM28XX_AMUX_LINE_IN,
1324 }, {
1325 .type = EM28XX_VMUX_SVIDEO,
1326 .vmux = TVP5150_SVIDEO,
1327 .amux = EM28XX_AMUX_LINE_IN,
1328 } },
1329 },
1330 [EM2880_BOARD_KWORLD_DVB_310U] = {
1331 .name = "KWorld DVB-T 310U",
1332 .tuner_type = TUNER_XC2028,
1333 .tuner_gpio = default_tuner_gpio,
1334 .has_dvb = 1,
1335 .dvb_gpio = default_digital,
1336 .mts_firmware = 1,
1337 .decoder = EM28XX_TVP5150,
1338 .input = { {
1339 .type = EM28XX_VMUX_TELEVISION,
1340 .vmux = TVP5150_COMPOSITE0,
1341 .amux = EM28XX_AMUX_VIDEO,
1342 .gpio = default_analog,
1343 }, {
1344 .type = EM28XX_VMUX_COMPOSITE1,
1345 .vmux = TVP5150_COMPOSITE1,
1346 .amux = EM28XX_AMUX_LINE_IN,
1347 .gpio = default_analog,
1348 }, { /* S-video has not been tested yet */
1349 .type = EM28XX_VMUX_SVIDEO,
1350 .vmux = TVP5150_SVIDEO,
1351 .amux = EM28XX_AMUX_LINE_IN,
1352 .gpio = default_analog,
1353 } },
1354 },
1355 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1356 .name = "KWorld ATSC 315U HDTV TV Box",
1357 .valid = EM28XX_BOARD_NOT_VALIDATED,
1358 .tuner_type = TUNER_THOMSON_DTT761X,
1359 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1360 .tda9887_conf = TDA9887_PRESENT,
1361 .decoder = EM28XX_SAA711X,
1362 .has_dvb = 1,
1363 .dvb_gpio = em2882_kworld_315u_digital,
1364 .ir_codes = RC_MAP_KWORLD_315U,
1365 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1366 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1367 /* Analog mode - still not ready */
1368 /*.input = { {
1369 .type = EM28XX_VMUX_TELEVISION,
1370 .vmux = SAA7115_COMPOSITE2,
1371 .amux = EM28XX_AMUX_VIDEO,
1372 .gpio = em2882_kworld_315u_analog,
1373 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1374 }, {
1375 .type = EM28XX_VMUX_COMPOSITE1,
1376 .vmux = SAA7115_COMPOSITE0,
1377 .amux = EM28XX_AMUX_LINE_IN,
1378 .gpio = em2882_kworld_315u_analog1,
1379 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1380 }, {
1381 .type = EM28XX_VMUX_SVIDEO,
1382 .vmux = SAA7115_SVIDEO3,
1383 .amux = EM28XX_AMUX_LINE_IN,
1384 .gpio = em2882_kworld_315u_analog1,
1385 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1386 } }, */
1387 },
1388 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1389 .name = "Empire dual TV",
1390 .tuner_type = TUNER_XC2028,
1391 .tuner_gpio = default_tuner_gpio,
1392 .has_dvb = 1,
1393 .dvb_gpio = default_digital,
1394 .mts_firmware = 1,
1395 .decoder = EM28XX_TVP5150,
1396 .input = { {
1397 .type = EM28XX_VMUX_TELEVISION,
1398 .vmux = TVP5150_COMPOSITE0,
1399 .amux = EM28XX_AMUX_VIDEO,
1400 .gpio = default_analog,
1401 }, {
1402 .type = EM28XX_VMUX_COMPOSITE1,
1403 .vmux = TVP5150_COMPOSITE1,
1404 .amux = EM28XX_AMUX_LINE_IN,
1405 .gpio = default_analog,
1406 }, {
1407 .type = EM28XX_VMUX_SVIDEO,
1408 .vmux = TVP5150_SVIDEO,
1409 .amux = EM28XX_AMUX_LINE_IN,
1410 .gpio = default_analog,
1411 } },
1412 },
1413 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1414 .name = "DNT DA2 Hybrid",
1415 .valid = EM28XX_BOARD_NOT_VALIDATED,
1416 .tuner_type = TUNER_XC2028,
1417 .tuner_gpio = default_tuner_gpio,
1418 .decoder = EM28XX_TVP5150,
1419 .input = { {
1420 .type = EM28XX_VMUX_TELEVISION,
1421 .vmux = TVP5150_COMPOSITE0,
1422 .amux = EM28XX_AMUX_VIDEO,
1423 .gpio = default_analog,
1424 }, {
1425 .type = EM28XX_VMUX_COMPOSITE1,
1426 .vmux = TVP5150_COMPOSITE1,
1427 .amux = EM28XX_AMUX_LINE_IN,
1428 .gpio = default_analog,
1429 }, {
1430 .type = EM28XX_VMUX_SVIDEO,
1431 .vmux = TVP5150_SVIDEO,
1432 .amux = EM28XX_AMUX_LINE_IN,
1433 .gpio = default_analog,
1434 } },
1435 },
1436 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1437 .name = "Pinnacle Hybrid Pro",
1438 .tuner_type = TUNER_XC2028,
1439 .tuner_gpio = default_tuner_gpio,
1440 .decoder = EM28XX_TVP5150,
1441 .has_dvb = 1,
1442 .dvb_gpio = pinnacle_hybrid_pro_digital,
1443 .input = { {
1444 .type = EM28XX_VMUX_TELEVISION,
1445 .vmux = TVP5150_COMPOSITE0,
1446 .amux = EM28XX_AMUX_VIDEO,
1447 .gpio = pinnacle_hybrid_pro_analog,
1448 }, {
1449 .type = EM28XX_VMUX_COMPOSITE1,
1450 .vmux = TVP5150_COMPOSITE1,
1451 .amux = EM28XX_AMUX_LINE_IN,
1452 .gpio = pinnacle_hybrid_pro_analog,
1453 }, {
1454 .type = EM28XX_VMUX_SVIDEO,
1455 .vmux = TVP5150_SVIDEO,
1456 .amux = EM28XX_AMUX_LINE_IN,
1457 .gpio = pinnacle_hybrid_pro_analog,
1458 } },
1459 },
1460 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1461 .name = "Pinnacle Hybrid Pro (330e)",
1462 .tuner_type = TUNER_XC2028,
1463 .tuner_gpio = default_tuner_gpio,
1464 .mts_firmware = 1,
1465 .has_dvb = 1,
1466 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1467 .decoder = EM28XX_TVP5150,
1468 .input = { {
1469 .type = EM28XX_VMUX_TELEVISION,
1470 .vmux = TVP5150_COMPOSITE0,
1471 .amux = EM28XX_AMUX_VIDEO,
1472 .gpio = hauppauge_wintv_hvr_900_analog,
1473 }, {
1474 .type = EM28XX_VMUX_COMPOSITE1,
1475 .vmux = TVP5150_COMPOSITE1,
1476 .amux = EM28XX_AMUX_LINE_IN,
1477 .gpio = hauppauge_wintv_hvr_900_analog,
1478 }, {
1479 .type = EM28XX_VMUX_SVIDEO,
1480 .vmux = TVP5150_SVIDEO,
1481 .amux = EM28XX_AMUX_LINE_IN,
1482 .gpio = hauppauge_wintv_hvr_900_analog,
1483 } },
1484 },
1485 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1486 .name = "Kworld VS-DVB-T 323UR",
1487 .tuner_type = TUNER_XC2028,
1488 .tuner_gpio = default_tuner_gpio,
1489 .decoder = EM28XX_TVP5150,
1490 .mts_firmware = 1,
1491 .has_dvb = 1,
1492 .dvb_gpio = kworld_330u_digital,
1493 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1494 .ir_codes = RC_MAP_KWORLD_315U,
1495 .input = { {
1496 .type = EM28XX_VMUX_TELEVISION,
1497 .vmux = TVP5150_COMPOSITE0,
1498 .amux = EM28XX_AMUX_VIDEO,
1499 }, {
1500 .type = EM28XX_VMUX_COMPOSITE1,
1501 .vmux = TVP5150_COMPOSITE1,
1502 .amux = EM28XX_AMUX_LINE_IN,
1503 }, {
1504 .type = EM28XX_VMUX_SVIDEO,
1505 .vmux = TVP5150_SVIDEO,
1506 .amux = EM28XX_AMUX_LINE_IN,
1507 } },
1508 },
1509 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1510 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1511 .tuner_type = TUNER_XC2028,
1512 .tuner_gpio = default_tuner_gpio,
1513 .mts_firmware = 1,
1514 .decoder = EM28XX_TVP5150,
1515 .has_dvb = 1,
1516 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1517 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1518 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1519 .input = { {
1520 .type = EM28XX_VMUX_TELEVISION,
1521 .vmux = TVP5150_COMPOSITE0,
1522 .amux = EM28XX_AMUX_VIDEO,
1523 .gpio = hauppauge_wintv_hvr_900_analog,
1524 }, {
1525 .type = EM28XX_VMUX_COMPOSITE1,
1526 .vmux = TVP5150_COMPOSITE1,
1527 .amux = EM28XX_AMUX_LINE_IN,
1528 .gpio = hauppauge_wintv_hvr_900_analog,
1529 }, {
1530 .type = EM28XX_VMUX_SVIDEO,
1531 .vmux = TVP5150_SVIDEO,
1532 .amux = EM28XX_AMUX_LINE_IN,
1533 .gpio = hauppauge_wintv_hvr_900_analog,
1534 } },
1535 },
1536 [EM2882_BOARD_DIKOM_DK300] = {
1537 .name = "Dikom DK300",
1538 .tuner_type = TUNER_XC2028,
1539 .tuner_gpio = default_tuner_gpio,
1540 .decoder = EM28XX_TVP5150,
1541 .mts_firmware = 1,
1542 .has_dvb = 1,
1543 .dvb_gpio = dikom_dk300_digital,
1544 .input = { {
1545 .type = EM28XX_VMUX_TELEVISION,
1546 .vmux = TVP5150_COMPOSITE0,
1547 .amux = EM28XX_AMUX_VIDEO,
1548 .gpio = default_analog,
1549 } },
1550 },
1551 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1552 .name = "Kworld PlusTV HD Hybrid 330",
1553 .tuner_type = TUNER_XC2028,
1554 .tuner_gpio = default_tuner_gpio,
1555 .decoder = EM28XX_TVP5150,
1556 .mts_firmware = 1,
1557 .has_dvb = 1,
1558 .dvb_gpio = kworld_330u_digital,
1559 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1560 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1561 EM28XX_I2C_EEPROM_ON_BOARD |
1562 EM28XX_I2C_EEPROM_KEY_VALID,
1563 .input = { {
1564 .type = EM28XX_VMUX_TELEVISION,
1565 .vmux = TVP5150_COMPOSITE0,
1566 .amux = EM28XX_AMUX_VIDEO,
1567 .gpio = kworld_330u_analog,
1568 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1569 }, {
1570 .type = EM28XX_VMUX_COMPOSITE1,
1571 .vmux = TVP5150_COMPOSITE1,
1572 .amux = EM28XX_AMUX_LINE_IN,
1573 .gpio = kworld_330u_analog,
1574 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1575 }, {
1576 .type = EM28XX_VMUX_SVIDEO,
1577 .vmux = TVP5150_SVIDEO,
1578 .amux = EM28XX_AMUX_LINE_IN,
1579 .gpio = kworld_330u_analog,
1580 } },
1581 },
1582 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1583 .name = "Compro VideoMate ForYou/Stereo",
1584 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1585 .tvaudio_addr = 0xb0,
1586 .tda9887_conf = TDA9887_PRESENT,
1587 .decoder = EM28XX_TVP5150,
1588 .adecoder = EM28XX_TVAUDIO,
1589 .mute_gpio = compro_mute_gpio,
1590 .input = { {
1591 .type = EM28XX_VMUX_TELEVISION,
1592 .vmux = TVP5150_COMPOSITE0,
1593 .amux = EM28XX_AMUX_VIDEO,
1594 .gpio = compro_unmute_tv_gpio,
1595 }, {
1596 .type = EM28XX_VMUX_SVIDEO,
1597 .vmux = TVP5150_SVIDEO,
1598 .amux = EM28XX_AMUX_LINE_IN,
1599 .gpio = compro_unmute_svid_gpio,
1600 } },
1601 },
1602 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1603 .name = "Kaiomy TVnPC U2",
1604 .vchannels = 3,
1605 .tuner_type = TUNER_XC2028,
1606 .tuner_addr = 0x61,
1607 .mts_firmware = 1,
1608 .decoder = EM28XX_TVP5150,
1609 .tuner_gpio = default_tuner_gpio,
1610 .ir_codes = RC_MAP_KAIOMY,
1611 .input = { {
1612 .type = EM28XX_VMUX_TELEVISION,
1613 .vmux = TVP5150_COMPOSITE0,
1614 .amux = EM28XX_AMUX_VIDEO,
1615
1616 }, {
1617 .type = EM28XX_VMUX_COMPOSITE1,
1618 .vmux = TVP5150_COMPOSITE1,
1619 .amux = EM28XX_AMUX_LINE_IN,
1620 }, {
1621 .type = EM28XX_VMUX_SVIDEO,
1622 .vmux = TVP5150_SVIDEO,
1623 .amux = EM28XX_AMUX_LINE_IN,
1624 } },
1625 .radio = {
1626 .type = EM28XX_RADIO,
1627 .amux = EM28XX_AMUX_LINE_IN,
1628 }
1629 },
1630 [EM2860_BOARD_EASYCAP] = {
1631 .name = "Easy Cap Capture DC-60",
1632 .vchannels = 2,
1633 .tuner_type = TUNER_ABSENT,
1634 .decoder = EM28XX_SAA711X,
1635 .input = { {
1636 .type = EM28XX_VMUX_COMPOSITE1,
1637 .vmux = SAA7115_COMPOSITE0,
1638 .amux = EM28XX_AMUX_LINE_IN,
1639 }, {
1640 .type = EM28XX_VMUX_SVIDEO,
1641 .vmux = SAA7115_SVIDEO3,
1642 .amux = EM28XX_AMUX_LINE_IN,
1643 } },
1644 },
1645 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1646 .name = "IO-DATA GV-MVP/SZ",
1647 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1648 .tuner_gpio = default_tuner_gpio,
1649 .tda9887_conf = TDA9887_PRESENT,
1650 .decoder = EM28XX_TVP5150,
1651 .input = { {
1652 .type = EM28XX_VMUX_TELEVISION,
1653 .vmux = TVP5150_COMPOSITE0,
1654 .amux = EM28XX_AMUX_VIDEO,
1655 }, { /* Composite has not been tested yet */
1656 .type = EM28XX_VMUX_COMPOSITE1,
1657 .vmux = TVP5150_COMPOSITE1,
1658 .amux = EM28XX_AMUX_VIDEO,
1659 }, { /* S-video has not been tested yet */
1660 .type = EM28XX_VMUX_SVIDEO,
1661 .vmux = TVP5150_SVIDEO,
1662 .amux = EM28XX_AMUX_VIDEO,
1663 } },
1664 },
1665 [EM2860_BOARD_TERRATEC_GRABBY] = {
1666 .name = "Terratec Grabby",
1667 .vchannels = 2,
1668 .tuner_type = TUNER_ABSENT,
1669 .decoder = EM28XX_SAA711X,
1670 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1671 .input = { {
1672 .type = EM28XX_VMUX_COMPOSITE1,
1673 .vmux = SAA7115_COMPOSITE0,
1674 .amux = EM28XX_AMUX_LINE_IN,
1675 }, {
1676 .type = EM28XX_VMUX_SVIDEO,
1677 .vmux = SAA7115_SVIDEO3,
1678 .amux = EM28XX_AMUX_LINE_IN,
1679 } },
1680 },
1681 [EM2860_BOARD_TERRATEC_AV350] = {
1682 .name = "Terratec AV350",
1683 .vchannels = 2,
1684 .tuner_type = TUNER_ABSENT,
1685 .decoder = EM28XX_TVP5150,
1686 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1687 .mute_gpio = terratec_av350_mute_gpio,
1688 .input = { {
1689 .type = EM28XX_VMUX_COMPOSITE1,
1690 .vmux = TVP5150_COMPOSITE1,
1691 .amux = EM28XX_AUDIO_SRC_LINE,
1692 .gpio = terratec_av350_unmute_gpio,
1693
1694 }, {
1695 .type = EM28XX_VMUX_SVIDEO,
1696 .vmux = TVP5150_SVIDEO,
1697 .amux = EM28XX_AUDIO_SRC_LINE,
1698 .gpio = terratec_av350_unmute_gpio,
1699 } },
1700 },
1701
1702 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1703 .name = "Elgato Video Capture",
1704 .decoder = EM28XX_SAA711X,
1705 .tuner_type = TUNER_ABSENT, /* Capture only device */
1706 .input = { {
1707 .type = EM28XX_VMUX_COMPOSITE1,
1708 .vmux = SAA7115_COMPOSITE0,
1709 .amux = EM28XX_AMUX_LINE_IN,
1710 }, {
1711 .type = EM28XX_VMUX_SVIDEO,
1712 .vmux = SAA7115_SVIDEO3,
1713 .amux = EM28XX_AMUX_LINE_IN,
1714 } },
1715 },
1716
1717 [EM2882_BOARD_EVGA_INDTUBE] = {
1718 .name = "Evga inDtube",
1719 .tuner_type = TUNER_XC2028,
1720 .tuner_gpio = default_tuner_gpio,
1721 .decoder = EM28XX_TVP5150,
1722 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1723 .mts_firmware = 1,
1724 .has_dvb = 1,
1725 .dvb_gpio = evga_indtube_digital,
1726 .ir_codes = RC_MAP_EVGA_INDTUBE,
1727 .input = { {
1728 .type = EM28XX_VMUX_TELEVISION,
1729 .vmux = TVP5150_COMPOSITE0,
1730 .amux = EM28XX_AMUX_VIDEO,
1731 .gpio = evga_indtube_analog,
1732 }, {
1733 .type = EM28XX_VMUX_COMPOSITE1,
1734 .vmux = TVP5150_COMPOSITE1,
1735 .amux = EM28XX_AMUX_LINE_IN,
1736 .gpio = evga_indtube_analog,
1737 }, {
1738 .type = EM28XX_VMUX_SVIDEO,
1739 .vmux = TVP5150_SVIDEO,
1740 .amux = EM28XX_AMUX_LINE_IN,
1741 .gpio = evga_indtube_analog,
1742 } },
1743 },
1744 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1745 Infineon TUA6034) */
1746 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1747 .name = "Reddo DVB-C USB TV Box",
1748 .tuner_type = TUNER_ABSENT,
1749 .tuner_gpio = reddo_dvb_c_usb_box,
1750 .has_dvb = 1,
1751 },
1752 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1753 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1754 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1755 [EM2870_BOARD_KWORLD_A340] = {
1756 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1757 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1758 .has_dvb = 1,
1759 .dvb_gpio = kworld_a340_digital,
1760 .tuner_gpio = default_tuner_gpio,
1761 },
1762 };
1763 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1764
1765 /* table of devices that work with this driver */
1766 struct usb_device_id em28xx_id_table[] = {
1767 { USB_DEVICE(0xeb1a, 0x2750),
1768 .driver_info = EM2750_BOARD_UNKNOWN },
1769 { USB_DEVICE(0xeb1a, 0x2751),
1770 .driver_info = EM2750_BOARD_UNKNOWN },
1771 { USB_DEVICE(0xeb1a, 0x2800),
1772 .driver_info = EM2800_BOARD_UNKNOWN },
1773 { USB_DEVICE(0xeb1a, 0x2710),
1774 .driver_info = EM2820_BOARD_UNKNOWN },
1775 { USB_DEVICE(0xeb1a, 0x2820),
1776 .driver_info = EM2820_BOARD_UNKNOWN },
1777 { USB_DEVICE(0xeb1a, 0x2821),
1778 .driver_info = EM2820_BOARD_UNKNOWN },
1779 { USB_DEVICE(0xeb1a, 0x2860),
1780 .driver_info = EM2820_BOARD_UNKNOWN },
1781 { USB_DEVICE(0xeb1a, 0x2861),
1782 .driver_info = EM2820_BOARD_UNKNOWN },
1783 { USB_DEVICE(0xeb1a, 0x2862),
1784 .driver_info = EM2820_BOARD_UNKNOWN },
1785 { USB_DEVICE(0xeb1a, 0x2863),
1786 .driver_info = EM2820_BOARD_UNKNOWN },
1787 { USB_DEVICE(0xeb1a, 0x2870),
1788 .driver_info = EM2820_BOARD_UNKNOWN },
1789 { USB_DEVICE(0xeb1a, 0x2881),
1790 .driver_info = EM2820_BOARD_UNKNOWN },
1791 { USB_DEVICE(0xeb1a, 0x2883),
1792 .driver_info = EM2820_BOARD_UNKNOWN },
1793 { USB_DEVICE(0xeb1a, 0x2868),
1794 .driver_info = EM2820_BOARD_UNKNOWN },
1795 { USB_DEVICE(0xeb1a, 0x2875),
1796 .driver_info = EM2820_BOARD_UNKNOWN },
1797 { USB_DEVICE(0xeb1a, 0xe300),
1798 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1799 { USB_DEVICE(0xeb1a, 0xe303),
1800 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1801 { USB_DEVICE(0xeb1a, 0xe305),
1802 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1803 { USB_DEVICE(0xeb1a, 0xe310),
1804 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1805 { USB_DEVICE(0xeb1a, 0xa313),
1806 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1807 { USB_DEVICE(0xeb1a, 0xa316),
1808 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1809 { USB_DEVICE(0xeb1a, 0xe320),
1810 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1811 { USB_DEVICE(0xeb1a, 0xe323),
1812 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1813 { USB_DEVICE(0xeb1a, 0xe350),
1814 .driver_info = EM2870_BOARD_KWORLD_350U },
1815 { USB_DEVICE(0xeb1a, 0xe355),
1816 .driver_info = EM2870_BOARD_KWORLD_355U },
1817 { USB_DEVICE(0xeb1a, 0x2801),
1818 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1819 { USB_DEVICE(0xeb1a, 0xe357),
1820 .driver_info = EM2870_BOARD_KWORLD_355U },
1821 { USB_DEVICE(0x1b80, 0xe302),
1822 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1823 { USB_DEVICE(0x1b80, 0xe304),
1824 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1825 { USB_DEVICE(0x0ccd, 0x0036),
1826 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1827 { USB_DEVICE(0x0ccd, 0x004c),
1828 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1829 { USB_DEVICE(0x0ccd, 0x004f),
1830 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1831 { USB_DEVICE(0x0ccd, 0x005e),
1832 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1833 { USB_DEVICE(0x0ccd, 0x0042),
1834 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1835 { USB_DEVICE(0x0ccd, 0x0043),
1836 .driver_info = EM2870_BOARD_TERRATEC_XS },
1837 { USB_DEVICE(0x0ccd, 0x0047),
1838 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1839 { USB_DEVICE(0x0ccd, 0x0084),
1840 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1841 { USB_DEVICE(0x0ccd, 0x0096),
1842 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1843 { USB_DEVICE(0x0fd9, 0x0033),
1844 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
1845 { USB_DEVICE(0x185b, 0x2870),
1846 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1847 { USB_DEVICE(0x185b, 0x2041),
1848 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1849 { USB_DEVICE(0x2040, 0x4200),
1850 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1851 { USB_DEVICE(0x2040, 0x4201),
1852 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1853 { USB_DEVICE(0x2040, 0x6500),
1854 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1855 { USB_DEVICE(0x2040, 0x6502),
1856 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1857 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1858 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1859 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1860 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1861 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1862 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1863 { USB_DEVICE(0x2040, 0x651f),
1864 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1865 { USB_DEVICE(0x0438, 0xb002),
1866 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1867 { USB_DEVICE(0x2001, 0xf112),
1868 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1869 { USB_DEVICE(0x2304, 0x0207),
1870 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1871 { USB_DEVICE(0x2304, 0x0208),
1872 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1873 { USB_DEVICE(0x2304, 0x021a),
1874 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1875 { USB_DEVICE(0x2304, 0x0226),
1876 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
1877 { USB_DEVICE(0x2304, 0x0227),
1878 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1879 { USB_DEVICE(0x0413, 0x6023),
1880 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1881 { USB_DEVICE(0x093b, 0xa005),
1882 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1883 { USB_DEVICE(0x04bb, 0x0515),
1884 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1885 { USB_DEVICE(0xeb1a, 0x50a6),
1886 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
1887 { USB_DEVICE(0x1b80, 0xa340),
1888 .driver_info = EM2870_BOARD_KWORLD_A340 },
1889 { },
1890 };
1891 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1892
1893 /*
1894 * EEPROM hash table for devices with generic USB IDs
1895 */
1896 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1897 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1898 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1899 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1900 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1901 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1902 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1903 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1904 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
1905 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
1906 };
1907
1908 /* I2C devicelist hash table for devices with generic USB IDs */
1909 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1910 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1911 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1912 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1913 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
1914 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1915 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
1916 {0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
1917 };
1918
1919 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1920 static unsigned short saa711x_addrs[] = {
1921 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1922 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1923 I2C_CLIENT_END };
1924
1925 static unsigned short tvp5150_addrs[] = {
1926 0xb8 >> 1,
1927 0xba >> 1,
1928 I2C_CLIENT_END
1929 };
1930
1931 static unsigned short msp3400_addrs[] = {
1932 0x80 >> 1,
1933 0x88 >> 1,
1934 I2C_CLIENT_END
1935 };
1936
1937 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1938 {
1939 int rc = 0;
1940 struct em28xx *dev = ptr;
1941
1942 if (dev->tuner_type != TUNER_XC2028)
1943 return 0;
1944
1945 if (command != XC2028_TUNER_RESET)
1946 return 0;
1947
1948 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1949
1950 return rc;
1951 }
1952 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1953
1954 static inline void em28xx_set_model(struct em28xx *dev)
1955 {
1956 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1957
1958 /* Those are the default values for the majority of boards
1959 Use those values if not specified otherwise at boards entry
1960 */
1961 if (!dev->board.xclk)
1962 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1963 EM28XX_XCLK_FREQUENCY_12MHZ;
1964
1965 if (!dev->board.i2c_speed)
1966 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1967 EM28XX_I2C_FREQ_100_KHZ;
1968 }
1969
1970
1971 /* FIXME: Should be replaced by a proper mt9m111 driver */
1972 static int em28xx_initialize_mt9m111(struct em28xx *dev)
1973 {
1974 int i;
1975 unsigned char regs[][3] = {
1976 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
1977 { 0x0d, 0x00, 0x00, },
1978 { 0x0a, 0x00, 0x21, },
1979 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
1980 };
1981
1982 for (i = 0; i < ARRAY_SIZE(regs); i++)
1983 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1984
1985 return 0;
1986 }
1987
1988
1989 /* FIXME: Should be replaced by a proper mt9m001 driver */
1990 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1991 {
1992 int i;
1993 unsigned char regs[][3] = {
1994 { 0x0d, 0x00, 0x01, },
1995 { 0x0d, 0x00, 0x00, },
1996 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
1997 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
1998 { 0x20, 0x11, 0x00, },
1999 { 0x06, 0x00, 0x10, },
2000 { 0x2b, 0x00, 0x24, },
2001 { 0x2e, 0x00, 0x24, },
2002 { 0x35, 0x00, 0x24, },
2003 { 0x2d, 0x00, 0x20, },
2004 { 0x2c, 0x00, 0x20, },
2005 { 0x09, 0x0a, 0xd4, },
2006 { 0x35, 0x00, 0x57, },
2007 };
2008
2009 for (i = 0; i < ARRAY_SIZE(regs); i++)
2010 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2011
2012 return 0;
2013 }
2014
2015 /* HINT method: webcam I2C chips
2016 *
2017 * This method works for webcams with Micron sensors
2018 */
2019 static int em28xx_hint_sensor(struct em28xx *dev)
2020 {
2021 int rc;
2022 char *sensor_name;
2023 unsigned char cmd;
2024 __be16 version_be;
2025 u16 version;
2026
2027 /* Micron sensor detection */
2028 dev->i2c_client.addr = 0xba >> 1;
2029 cmd = 0;
2030 i2c_master_send(&dev->i2c_client, &cmd, 1);
2031 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2032 if (rc != 2)
2033 return -EINVAL;
2034
2035 version = be16_to_cpu(version_be);
2036 switch (version) {
2037 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2038 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2039 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2040 em28xx_set_model(dev);
2041
2042 sensor_name = "mt9v011";
2043 dev->em28xx_sensor = EM28XX_MT9V011;
2044 dev->sensor_xres = 640;
2045 dev->sensor_yres = 480;
2046 /*
2047 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2048 * the Silvercrest cam I have here for testing - for higher
2049 * resolutions, a high clock cause horizontal artifacts, so we
2050 * need to use a lower xclk frequency.
2051 * Yet, it would be possible to adjust xclk depending on the
2052 * desired resolution, since this affects directly the
2053 * frame rate.
2054 */
2055 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2056 dev->sensor_xtal = 4300000;
2057
2058 /* probably means GRGB 16 bit bayer */
2059 dev->vinmode = 0x0d;
2060 dev->vinctl = 0x00;
2061
2062 break;
2063
2064 case 0x143a: /* MT9M111 as found in the ECS G200 */
2065 dev->model = EM2750_BOARD_UNKNOWN;
2066 em28xx_set_model(dev);
2067
2068 sensor_name = "mt9m111";
2069 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2070 dev->em28xx_sensor = EM28XX_MT9M111;
2071 em28xx_initialize_mt9m111(dev);
2072 dev->sensor_xres = 640;
2073 dev->sensor_yres = 512;
2074
2075 dev->vinmode = 0x0a;
2076 dev->vinctl = 0x00;
2077
2078 break;
2079
2080 case 0x8431:
2081 dev->model = EM2750_BOARD_UNKNOWN;
2082 em28xx_set_model(dev);
2083
2084 sensor_name = "mt9m001";
2085 dev->em28xx_sensor = EM28XX_MT9M001;
2086 em28xx_initialize_mt9m001(dev);
2087 dev->sensor_xres = 1280;
2088 dev->sensor_yres = 1024;
2089
2090 /* probably means BGGR 16 bit bayer */
2091 dev->vinmode = 0x0c;
2092 dev->vinctl = 0x00;
2093
2094 break;
2095 default:
2096 printk("Unknown Micron Sensor 0x%04x\n", version);
2097 return -EINVAL;
2098 }
2099
2100 /* Setup webcam defaults */
2101 em28xx_pre_card_setup(dev);
2102
2103 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2104 sensor_name, em28xx_boards[dev->model].name);
2105
2106 return 0;
2107 }
2108
2109 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2110 * this won't work for boards with generic PCI IDs
2111 */
2112 void em28xx_pre_card_setup(struct em28xx *dev)
2113 {
2114 /* Set the initial XCLK and I2C clock values based on the board
2115 definition */
2116 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2117 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2118 msleep(50);
2119
2120 /* request some modules */
2121 switch (dev->model) {
2122 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2123 /* Sets the msp34xx I2S speed */
2124 dev->i2s_speed = 2048000;
2125 break;
2126 case EM2861_BOARD_KWORLD_PVRTV_300U:
2127 case EM2880_BOARD_KWORLD_DVB_305U:
2128 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2129 msleep(10);
2130 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2131 msleep(10);
2132 break;
2133 case EM2870_BOARD_COMPRO_VIDEOMATE:
2134 /* TODO: someone can do some cleanup here...
2135 not everything's needed */
2136 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2137 msleep(10);
2138 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2139 msleep(10);
2140 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2141 mdelay(70);
2142 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2143 mdelay(70);
2144 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2145 mdelay(70);
2146 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2147 mdelay(70);
2148 break;
2149 case EM2870_BOARD_TERRATEC_XS_MT2060:
2150 /* this device needs some gpio writes to get the DVB-T
2151 demod work */
2152 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2153 mdelay(70);
2154 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2155 mdelay(70);
2156 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2157 mdelay(70);
2158 break;
2159 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2160 /* this device needs some gpio writes to get the
2161 DVB-T demod work */
2162 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2163 mdelay(70);
2164 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2165 mdelay(70);
2166 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2167 mdelay(70);
2168 break;
2169 case EM2820_BOARD_GADMEI_UTV310:
2170 case EM2820_BOARD_MSI_VOX_USB_2:
2171 /* enables audio for that devices */
2172 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2173 break;
2174
2175 case EM2882_BOARD_KWORLD_ATSC_315U:
2176 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2177 msleep(10);
2178 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2179 msleep(10);
2180 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2181 msleep(10);
2182 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2183 msleep(10);
2184 break;
2185
2186 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2187 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2188 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2189 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2190 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2191 msleep(10);
2192 em28xx_write_regs(dev, 0x08, "\xff", 1);
2193 msleep(10);
2194 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2195 msleep(10);
2196 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2197
2198 break;
2199 case EM2860_BOARD_EASYCAP:
2200 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2201 break;
2202
2203 case EM2820_BOARD_IODATA_GVMVP_SZ:
2204 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2205 msleep(70);
2206 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2207 msleep(10);
2208 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2209 msleep(70);
2210 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2211 msleep(70);
2212 break;
2213 }
2214
2215 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2216 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2217
2218 /* Unlock device */
2219 em28xx_set_mode(dev, EM28XX_SUSPEND);
2220 }
2221
2222 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2223 {
2224 memset(ctl, 0, sizeof(*ctl));
2225
2226 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2227 ctl->max_len = 64;
2228 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2229
2230 switch (dev->model) {
2231 case EM2880_BOARD_EMPIRE_DUAL_TV:
2232 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2233 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2234 ctl->demod = XC3028_FE_ZARLINK456;
2235 break;
2236 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2237 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2238 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2239 ctl->demod = XC3028_FE_ZARLINK456;
2240 break;
2241 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2242 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2243 ctl->demod = XC3028_FE_DEFAULT;
2244 break;
2245 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2246 ctl->demod = XC3028_FE_DEFAULT;
2247 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2248 break;
2249 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2250 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2251 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2252 /* FIXME: Better to specify the needed IF */
2253 ctl->demod = XC3028_FE_DEFAULT;
2254 break;
2255 case EM2883_BOARD_KWORLD_HYBRID_330U:
2256 case EM2882_BOARD_DIKOM_DK300:
2257 case EM2882_BOARD_KWORLD_VS_DVBT:
2258 ctl->demod = XC3028_FE_CHINA;
2259 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2260 break;
2261 case EM2882_BOARD_EVGA_INDTUBE:
2262 ctl->demod = XC3028_FE_CHINA;
2263 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2264 break;
2265 default:
2266 ctl->demod = XC3028_FE_OREN538;
2267 }
2268 }
2269
2270 static void em28xx_tuner_setup(struct em28xx *dev)
2271 {
2272 struct tuner_setup tun_setup;
2273 struct v4l2_frequency f;
2274
2275 if (dev->tuner_type == TUNER_ABSENT)
2276 return;
2277
2278 memset(&tun_setup, 0, sizeof(tun_setup));
2279
2280 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2281 tun_setup.tuner_callback = em28xx_tuner_callback;
2282
2283 if (dev->board.radio.type) {
2284 tun_setup.type = dev->board.radio.type;
2285 tun_setup.addr = dev->board.radio_addr;
2286
2287 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2288 }
2289
2290 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2291 tun_setup.type = dev->tuner_type;
2292 tun_setup.addr = dev->tuner_addr;
2293
2294 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2295 }
2296
2297 if (dev->tda9887_conf) {
2298 struct v4l2_priv_tun_config tda9887_cfg;
2299
2300 tda9887_cfg.tuner = TUNER_TDA9887;
2301 tda9887_cfg.priv = &dev->tda9887_conf;
2302
2303 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2304 }
2305
2306 if (dev->tuner_type == TUNER_XC2028) {
2307 struct v4l2_priv_tun_config xc2028_cfg;
2308 struct xc2028_ctrl ctl;
2309
2310 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2311 memset(&ctl, 0, sizeof(ctl));
2312
2313 em28xx_setup_xc3028(dev, &ctl);
2314
2315 xc2028_cfg.tuner = TUNER_XC2028;
2316 xc2028_cfg.priv = &ctl;
2317
2318 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2319 }
2320
2321 /* configure tuner */
2322 f.tuner = 0;
2323 f.type = V4L2_TUNER_ANALOG_TV;
2324 f.frequency = 9076; /* just a magic number */
2325 dev->ctl_freq = f.frequency;
2326 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2327 }
2328
2329 static int em28xx_hint_board(struct em28xx *dev)
2330 {
2331 int i;
2332
2333 /* HINT method: EEPROM
2334 *
2335 * This method works only for boards with eeprom.
2336 * Uses a hash of all eeprom bytes. The hash should be
2337 * unique for a vendor/tuner pair.
2338 * There are a high chance that tuners for different
2339 * video standards produce different hashes.
2340 */
2341 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2342 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2343 dev->model = em28xx_eeprom_hash[i].model;
2344 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2345
2346 em28xx_errdev("Your board has no unique USB ID.\n");
2347 em28xx_errdev("A hint were successfully done, "
2348 "based on eeprom hash.\n");
2349 em28xx_errdev("This method is not 100%% failproof.\n");
2350 em28xx_errdev("If the board were missdetected, "
2351 "please email this log to:\n");
2352 em28xx_errdev("\tV4L Mailing List "
2353 " <linux-media@vger.kernel.org>\n");
2354 em28xx_errdev("Board detected as %s\n",
2355 em28xx_boards[dev->model].name);
2356
2357 return 0;
2358 }
2359 }
2360
2361 /* HINT method: I2C attached devices
2362 *
2363 * This method works for all boards.
2364 * Uses a hash of i2c scanned devices.
2365 * Devices with the same i2c attached chips will
2366 * be considered equal.
2367 * This method is less precise than the eeprom one.
2368 */
2369
2370 /* user did not request i2c scanning => do it now */
2371 if (!dev->i2c_hash)
2372 em28xx_do_i2c_scan(dev);
2373
2374 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2375 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2376 dev->model = em28xx_i2c_hash[i].model;
2377 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2378 em28xx_errdev("Your board has no unique USB ID.\n");
2379 em28xx_errdev("A hint were successfully done, "
2380 "based on i2c devicelist hash.\n");
2381 em28xx_errdev("This method is not 100%% failproof.\n");
2382 em28xx_errdev("If the board were missdetected, "
2383 "please email this log to:\n");
2384 em28xx_errdev("\tV4L Mailing List "
2385 " <linux-media@vger.kernel.org>\n");
2386 em28xx_errdev("Board detected as %s\n",
2387 em28xx_boards[dev->model].name);
2388
2389 return 0;
2390 }
2391 }
2392
2393 em28xx_errdev("Your board has no unique USB ID and thus need a "
2394 "hint to be detected.\n");
2395 em28xx_errdev("You may try to use card=<n> insmod option to "
2396 "workaround that.\n");
2397 em28xx_errdev("Please send an email with this log to:\n");
2398 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2399 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2400 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2401
2402 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2403 " insmod option:\n");
2404 for (i = 0; i < em28xx_bcount; i++) {
2405 em28xx_errdev(" card=%d -> %s\n",
2406 i, em28xx_boards[i].name);
2407 }
2408 return -1;
2409 }
2410
2411 /* ----------------------------------------------------------------------- */
2412 void em28xx_register_i2c_ir(struct em28xx *dev)
2413 {
2414 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
2415 /* at address 0x18, so if that address is needed for another board in */
2416 /* the future, please put it after 0x1f. */
2417 struct i2c_board_info info;
2418 const unsigned short addr_list[] = {
2419 0x1f, 0x30, 0x47, I2C_CLIENT_END
2420 };
2421
2422 if (disable_ir)
2423 return;
2424
2425 memset(&info, 0, sizeof(struct i2c_board_info));
2426 memset(&dev->init_data, 0, sizeof(dev->init_data));
2427 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2428
2429 /* detect & configure */
2430 switch (dev->model) {
2431 case EM2800_BOARD_TERRATEC_CINERGY_200:
2432 case EM2820_BOARD_TERRATEC_CINERGY_250:
2433 dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
2434 dev->init_data.get_key = em28xx_get_key_terratec;
2435 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2436 break;
2437 case EM2820_BOARD_PINNACLE_USB_2:
2438 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
2439 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2440 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2441 break;
2442 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2443 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
2444 dev->init_data.get_key = em28xx_get_key_em_haup;
2445 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2446 break;
2447 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
2448 dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
2449 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
2450 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
2451 break;
2452 }
2453
2454 if (dev->init_data.name)
2455 info.platform_data = &dev->init_data;
2456 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
2457 }
2458
2459 void em28xx_card_setup(struct em28xx *dev)
2460 {
2461 /*
2462 * If the device can be a webcam, seek for a sensor.
2463 * If sensor is not found, then it isn't a webcam.
2464 */
2465 if (dev->board.is_webcam) {
2466 if (em28xx_hint_sensor(dev) < 0)
2467 dev->board.is_webcam = 0;
2468 else
2469 dev->progressive = 1;
2470 }
2471
2472 if (!dev->board.is_webcam) {
2473 switch (dev->model) {
2474 case EM2820_BOARD_UNKNOWN:
2475 case EM2800_BOARD_UNKNOWN:
2476 /*
2477 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2478 *
2479 * This occurs because they share identical USB vendor and
2480 * product IDs.
2481 *
2482 * What we do here is look up the EEPROM hash of the K-WORLD
2483 * and if it is found then we decide that we do not have
2484 * a DIGIVOX and reset the device to the K-WORLD instead.
2485 *
2486 * This solution is only valid if they do not share eeprom
2487 * hash identities which has not been determined as yet.
2488 */
2489 if (em28xx_hint_board(dev) < 0)
2490 em28xx_errdev("Board not discovered\n");
2491 else {
2492 em28xx_set_model(dev);
2493 em28xx_pre_card_setup(dev);
2494 }
2495 break;
2496 default:
2497 em28xx_set_model(dev);
2498 }
2499 }
2500
2501 em28xx_info("Identified as %s (card=%d)\n",
2502 dev->board.name, dev->model);
2503
2504 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2505 if (em28xx_boards[dev->model].tuner_addr)
2506 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2507
2508 if (em28xx_boards[dev->model].tda9887_conf)
2509 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2510
2511 /* request some modules */
2512 switch (dev->model) {
2513 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2514 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2515 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2516 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2517 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2518 {
2519 struct tveeprom tv;
2520 #if defined(CONFIG_MODULES) && defined(MODULE)
2521 request_module("tveeprom");
2522 #endif
2523 /* Call first TVeeprom */
2524
2525 dev->i2c_client.addr = 0xa0 >> 1;
2526 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2527
2528 dev->tuner_type = tv.tuner_type;
2529
2530 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2531 dev->i2s_speed = 2048000;
2532 dev->board.has_msp34xx = 1;
2533 }
2534 break;
2535 }
2536 case EM2882_BOARD_KWORLD_ATSC_315U:
2537 em28xx_write_reg(dev, 0x0d, 0x42);
2538 msleep(10);
2539 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2540 msleep(10);
2541 break;
2542 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2543 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2544 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2545 break;
2546 case EM2820_BOARD_UNKNOWN:
2547 case EM2800_BOARD_UNKNOWN:
2548 /*
2549 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2550 *
2551 * This occurs because they share identical USB vendor and
2552 * product IDs.
2553 *
2554 * What we do here is look up the EEPROM hash of the K-WORLD
2555 * and if it is found then we decide that we do not have
2556 * a DIGIVOX and reset the device to the K-WORLD instead.
2557 *
2558 * This solution is only valid if they do not share eeprom
2559 * hash identities which has not been determined as yet.
2560 */
2561 case EM2880_BOARD_MSI_DIGIVOX_AD:
2562 if (!em28xx_hint_board(dev))
2563 em28xx_set_model(dev);
2564
2565 /* In cases where we had to use a board hint, the call to
2566 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2567 so make the call now so the analog GPIOs are set properly
2568 before probing the i2c bus. */
2569 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2570 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2571 break;
2572
2573 /*
2574 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2575 *
2576 * This occurs because they share identical USB vendor and
2577 * product IDs.
2578 *
2579 * What we do here is look up the EEPROM hash of the Dikom
2580 * and if it is found then we decide that we do not have
2581 * a Kworld and reset the device to the Dikom instead.
2582 *
2583 * This solution is only valid if they do not share eeprom
2584 * hash identities which has not been determined as yet.
2585 */
2586 case EM2882_BOARD_KWORLD_VS_DVBT:
2587 if (!em28xx_hint_board(dev))
2588 em28xx_set_model(dev);
2589
2590 /* In cases where we had to use a board hint, the call to
2591 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2592 so make the call now so the analog GPIOs are set properly
2593 before probing the i2c bus. */
2594 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2595 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2596 break;
2597 }
2598
2599 #if defined(CONFIG_MODULES) && defined(MODULE)
2600 if (dev->board.has_ir_i2c && !disable_ir)
2601 request_module("ir-kbd-i2c");
2602 #endif
2603 if (dev->board.has_snapshot_button)
2604 em28xx_register_snapshot_button(dev);
2605
2606 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2607 em28xx_errdev("\n\n");
2608 em28xx_errdev("The support for this board weren't "
2609 "valid yet.\n");
2610 em28xx_errdev("Please send a report of having this working\n");
2611 em28xx_errdev("not to V4L mailing list (and/or to other "
2612 "addresses)\n\n");
2613 }
2614
2615 /* Allow override tuner type by a module parameter */
2616 if (tuner >= 0)
2617 dev->tuner_type = tuner;
2618
2619 /* request some modules */
2620 if (dev->board.has_msp34xx)
2621 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2622 "msp3400", 0, msp3400_addrs);
2623
2624 if (dev->board.decoder == EM28XX_SAA711X)
2625 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2626 "saa7115_auto", 0, saa711x_addrs);
2627
2628 if (dev->board.decoder == EM28XX_TVP5150)
2629 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2630 "tvp5150", 0, tvp5150_addrs);
2631
2632 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2633 struct mt9v011_platform_data pdata;
2634 struct i2c_board_info mt9v011_info = {
2635 .type = "mt9v011",
2636 .addr = 0xba >> 1,
2637 .platform_data = &pdata,
2638 };
2639 struct v4l2_subdev *sd;
2640
2641 pdata.xtal = dev->sensor_xtal;
2642 sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2643 &mt9v011_info, NULL);
2644 }
2645
2646
2647 if (dev->board.adecoder == EM28XX_TVAUDIO)
2648 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2649 "tvaudio", dev->board.tvaudio_addr, NULL);
2650
2651 if (dev->board.tuner_type != TUNER_ABSENT) {
2652 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2653
2654 if (dev->board.radio.type)
2655 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2656 "tuner", dev->board.radio_addr, NULL);
2657
2658 if (has_demod)
2659 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2660 &dev->i2c_adap, "tuner",
2661 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2662 if (dev->tuner_addr == 0) {
2663 enum v4l2_i2c_tuner_type type =
2664 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2665 struct v4l2_subdev *sd;
2666
2667 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2668 &dev->i2c_adap, "tuner",
2669 0, v4l2_i2c_tuner_addrs(type));
2670
2671 if (sd)
2672 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2673 } else {
2674 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2675 "tuner", dev->tuner_addr, NULL);
2676 }
2677 }
2678
2679 em28xx_tuner_setup(dev);
2680
2681 if(!disable_ir)
2682 em28xx_ir_init(dev);
2683 }
2684
2685
2686 #if defined(CONFIG_MODULES) && defined(MODULE)
2687 static void request_module_async(struct work_struct *work)
2688 {
2689 struct em28xx *dev = container_of(work,
2690 struct em28xx, request_module_wk);
2691
2692 if (dev->has_audio_class)
2693 request_module("snd-usb-audio");
2694 else if (dev->has_alsa_audio)
2695 request_module("em28xx-alsa");
2696
2697 if (dev->board.has_dvb)
2698 request_module("em28xx-dvb");
2699 }
2700
2701 static void request_modules(struct em28xx *dev)
2702 {
2703 INIT_WORK(&dev->request_module_wk, request_module_async);
2704 schedule_work(&dev->request_module_wk);
2705 }
2706
2707 static void flush_request_modules(struct em28xx *dev)
2708 {
2709 flush_work_sync(&dev->request_module_wk);
2710 }
2711 #else
2712 #define request_modules(dev)
2713 #define flush_request_modules(dev)
2714 #endif /* CONFIG_MODULES */
2715
2716 /*
2717 * em28xx_realease_resources()
2718 * unregisters the v4l2,i2c and usb devices
2719 * called when the device gets disconected or at module unload
2720 */
2721 void em28xx_release_resources(struct em28xx *dev)
2722 {
2723 if (dev->sbutton_input_dev)
2724 em28xx_deregister_snapshot_button(dev);
2725
2726 if (dev->ir)
2727 em28xx_ir_fini(dev);
2728
2729 /*FIXME: I2C IR should be disconnected */
2730
2731 em28xx_release_analog_resources(dev);
2732
2733 em28xx_remove_from_devlist(dev);
2734
2735 em28xx_i2c_unregister(dev);
2736
2737 v4l2_device_unregister(&dev->v4l2_dev);
2738
2739 usb_put_dev(dev->udev);
2740
2741 /* Mark device as unused */
2742 em28xx_devused &= ~(1 << dev->devno);
2743 };
2744
2745 /*
2746 * em28xx_init_dev()
2747 * allocates and inits the device structs, registers i2c bus and v4l device
2748 */
2749 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2750 struct usb_interface *interface,
2751 int minor)
2752 {
2753 struct em28xx *dev = *devhandle;
2754 int retval;
2755 int errCode;
2756
2757 dev->udev = udev;
2758 mutex_init(&dev->ctrl_urb_lock);
2759 spin_lock_init(&dev->slock);
2760 init_waitqueue_head(&dev->open);
2761 init_waitqueue_head(&dev->wait_frame);
2762 init_waitqueue_head(&dev->wait_stream);
2763
2764 dev->em28xx_write_regs = em28xx_write_regs;
2765 dev->em28xx_read_reg = em28xx_read_reg;
2766 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2767 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2768 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2769 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2770
2771 em28xx_set_model(dev);
2772
2773 /* Set the default GPO/GPIO for legacy devices */
2774 dev->reg_gpo_num = EM2880_R04_GPO;
2775 dev->reg_gpio_num = EM28XX_R08_GPIO;
2776
2777 dev->wait_after_write = 5;
2778
2779 /* Based on the Chip ID, set the device configuration */
2780 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2781 if (retval > 0) {
2782 dev->chip_id = retval;
2783
2784 switch (dev->chip_id) {
2785 case CHIP_ID_EM2800:
2786 em28xx_info("chip ID is em2800\n");
2787 break;
2788 case CHIP_ID_EM2710:
2789 em28xx_info("chip ID is em2710\n");
2790 break;
2791 case CHIP_ID_EM2750:
2792 em28xx_info("chip ID is em2750\n");
2793 break;
2794 case CHIP_ID_EM2820:
2795 em28xx_info("chip ID is em2820 (or em2710)\n");
2796 break;
2797 case CHIP_ID_EM2840:
2798 em28xx_info("chip ID is em2840\n");
2799 break;
2800 case CHIP_ID_EM2860:
2801 em28xx_info("chip ID is em2860\n");
2802 break;
2803 case CHIP_ID_EM2870:
2804 em28xx_info("chip ID is em2870\n");
2805 dev->wait_after_write = 0;
2806 break;
2807 case CHIP_ID_EM2874:
2808 em28xx_info("chip ID is em2874\n");
2809 dev->reg_gpio_num = EM2874_R80_GPIO;
2810 dev->wait_after_write = 0;
2811 break;
2812 case CHIP_ID_EM2883:
2813 em28xx_info("chip ID is em2882/em2883\n");
2814 dev->wait_after_write = 0;
2815 break;
2816 default:
2817 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2818 }
2819 }
2820
2821 /* Prepopulate cached GPO register content */
2822 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2823 if (retval >= 0)
2824 dev->reg_gpo = retval;
2825
2826 em28xx_pre_card_setup(dev);
2827
2828 if (!dev->board.is_em2800) {
2829 /* Resets I2C speed */
2830 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2831 if (retval < 0) {
2832 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2833 " retval [%d]\n",
2834 __func__, retval);
2835 return retval;
2836 }
2837 }
2838
2839 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2840 if (retval < 0) {
2841 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2842 return retval;
2843 }
2844
2845 /* register i2c bus */
2846 errCode = em28xx_i2c_register(dev);
2847 if (errCode < 0) {
2848 v4l2_device_unregister(&dev->v4l2_dev);
2849 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2850 __func__, errCode);
2851 return errCode;
2852 }
2853
2854 /*
2855 * Default format, used for tvp5150 or saa711x output formats
2856 */
2857 dev->vinmode = 0x10;
2858 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
2859 EM28XX_VINCTRL_CCIR656_ENABLE;
2860
2861 /* Do board specific init and eeprom reading */
2862 em28xx_card_setup(dev);
2863
2864 /* Configure audio */
2865 errCode = em28xx_audio_setup(dev);
2866 if (errCode < 0) {
2867 v4l2_device_unregister(&dev->v4l2_dev);
2868 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2869 __func__, errCode);
2870 }
2871
2872 /* wake i2c devices */
2873 em28xx_wake_i2c(dev);
2874
2875 /* init video dma queues */
2876 INIT_LIST_HEAD(&dev->vidq.active);
2877 INIT_LIST_HEAD(&dev->vidq.queued);
2878 INIT_LIST_HEAD(&dev->vbiq.active);
2879 INIT_LIST_HEAD(&dev->vbiq.queued);
2880
2881 if (dev->board.has_msp34xx) {
2882 /* Send a reset to other chips via gpio */
2883 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2884 if (errCode < 0) {
2885 em28xx_errdev("%s: em28xx_write_regs_req - "
2886 "msp34xx(1) failed! errCode [%d]\n",
2887 __func__, errCode);
2888 return errCode;
2889 }
2890 msleep(3);
2891
2892 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2893 if (errCode < 0) {
2894 em28xx_errdev("%s: em28xx_write_regs_req - "
2895 "msp34xx(2) failed! errCode [%d]\n",
2896 __func__, errCode);
2897 return errCode;
2898 }
2899 msleep(3);
2900 }
2901
2902 em28xx_add_into_devlist(dev);
2903
2904 retval = em28xx_register_analog_devices(dev);
2905 if (retval < 0) {
2906 em28xx_release_resources(dev);
2907 goto fail_reg_devices;
2908 }
2909
2910 em28xx_init_extension(dev);
2911
2912 /* Save some power by putting tuner to sleep */
2913 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
2914
2915 return 0;
2916
2917 fail_reg_devices:
2918 return retval;
2919 }
2920
2921 /*
2922 * em28xx_usb_probe()
2923 * checks for supported devices
2924 */
2925 static int em28xx_usb_probe(struct usb_interface *interface,
2926 const struct usb_device_id *id)
2927 {
2928 const struct usb_endpoint_descriptor *endpoint;
2929 struct usb_device *udev;
2930 struct usb_interface *uif;
2931 struct em28xx *dev = NULL;
2932 int retval;
2933 int i, nr, ifnum, isoc_pipe;
2934 char *speed;
2935 char descr[255] = "";
2936
2937 udev = usb_get_dev(interface_to_usbdev(interface));
2938 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2939
2940 /* Check to see next free device and mark as used */
2941 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2942 em28xx_devused |= 1<<nr;
2943
2944 /* Don't register audio interfaces */
2945 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2946 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2947 "interface %i, class %i\n",
2948 le16_to_cpu(udev->descriptor.idVendor),
2949 le16_to_cpu(udev->descriptor.idProduct),
2950 ifnum,
2951 interface->altsetting[0].desc.bInterfaceClass);
2952
2953 em28xx_devused &= ~(1<<nr);
2954 retval = -ENODEV;
2955 goto err;
2956 }
2957
2958 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2959
2960 /* check if the device has the iso in endpoint at the correct place */
2961 if (usb_endpoint_xfer_isoc(endpoint)
2962 &&
2963 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2964 /* It's a newer em2874/em2875 device */
2965 isoc_pipe = 0;
2966 } else {
2967 int check_interface = 1;
2968 isoc_pipe = 1;
2969 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2970 if (!usb_endpoint_xfer_isoc(endpoint))
2971 check_interface = 0;
2972
2973 if (usb_endpoint_dir_out(endpoint))
2974 check_interface = 0;
2975
2976 if (!check_interface) {
2977 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2978 "interface %i, class %i found.\n",
2979 le16_to_cpu(udev->descriptor.idVendor),
2980 le16_to_cpu(udev->descriptor.idProduct),
2981 ifnum,
2982 interface->altsetting[0].desc.bInterfaceClass);
2983
2984 em28xx_err(DRIVER_NAME " This is an anciliary "
2985 "interface not used by the driver\n");
2986
2987 em28xx_devused &= ~(1<<nr);
2988 retval = -ENODEV;
2989 goto err;
2990 }
2991 }
2992
2993 switch (udev->speed) {
2994 case USB_SPEED_LOW:
2995 speed = "1.5";
2996 break;
2997 case USB_SPEED_UNKNOWN:
2998 case USB_SPEED_FULL:
2999 speed = "12";
3000 break;
3001 case USB_SPEED_HIGH:
3002 speed = "480";
3003 break;
3004 default:
3005 speed = "unknown";
3006 }
3007
3008 if (udev->manufacturer)
3009 strlcpy(descr, udev->manufacturer, sizeof(descr));
3010
3011 if (udev->product) {
3012 if (*descr)
3013 strlcat(descr, " ", sizeof(descr));
3014 strlcat(descr, udev->product, sizeof(descr));
3015 }
3016 if (*descr)
3017 strlcat(descr, " ", sizeof(descr));
3018
3019 printk(DRIVER_NAME ": New device %s@ %s Mbps "
3020 "(%04x:%04x, interface %d, class %d)\n",
3021 descr,
3022 speed,
3023 le16_to_cpu(udev->descriptor.idVendor),
3024 le16_to_cpu(udev->descriptor.idProduct),
3025 ifnum,
3026 interface->altsetting->desc.bInterfaceNumber);
3027
3028 /*
3029 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3030 * video stream wouldn't likely work, since 12 Mbps is generally
3031 * not enough even for most Digital TV streams.
3032 */
3033 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3034 printk(DRIVER_NAME ": Device initialization failed.\n");
3035 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3036 " USB 2.0 port.\n");
3037 em28xx_devused &= ~(1<<nr);
3038 retval = -ENODEV;
3039 goto err;
3040 }
3041
3042 if (nr >= EM28XX_MAXBOARDS) {
3043 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3044 EM28XX_MAXBOARDS);
3045 em28xx_devused &= ~(1<<nr);
3046 retval = -ENOMEM;
3047 goto err;
3048 }
3049
3050 /* allocate memory for our device state and initialize it */
3051 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3052 if (dev == NULL) {
3053 em28xx_err(DRIVER_NAME ": out of memory!\n");
3054 em28xx_devused &= ~(1<<nr);
3055 retval = -ENOMEM;
3056 goto err;
3057 }
3058
3059 snprintf(dev->name, 29, "em28xx #%d", nr);
3060 dev->devno = nr;
3061 dev->model = id->driver_info;
3062 dev->alt = -1;
3063
3064 /* Checks if audio is provided by some interface */
3065 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3066 uif = udev->config->interface[i];
3067 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3068 dev->has_audio_class = 1;
3069 break;
3070 }
3071 }
3072
3073 /* compute alternate max packet sizes */
3074 uif = udev->actconfig->interface[0];
3075
3076 dev->num_alt = uif->num_altsetting;
3077 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
3078
3079 if (dev->alt_max_pkt_size == NULL) {
3080 em28xx_errdev("out of memory!\n");
3081 em28xx_devused &= ~(1<<nr);
3082 kfree(dev);
3083 retval = -ENOMEM;
3084 goto err;
3085 }
3086
3087 for (i = 0; i < dev->num_alt ; i++) {
3088 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
3089 dev->alt_max_pkt_size[i] =
3090 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
3091 }
3092
3093 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3094 dev->model = card[nr];
3095
3096 /* allocate device struct */
3097 mutex_init(&dev->lock);
3098 mutex_lock(&dev->lock);
3099 retval = em28xx_init_dev(&dev, udev, interface, nr);
3100 if (retval) {
3101 em28xx_devused &= ~(1<<dev->devno);
3102 mutex_unlock(&dev->lock);
3103 kfree(dev);
3104 goto err;
3105 }
3106
3107 /* save our data pointer in this interface device */
3108 usb_set_intfdata(interface, dev);
3109
3110 request_modules(dev);
3111
3112 /* Should be the last thing to do, to avoid newer udev's to
3113 open the device before fully initializing it
3114 */
3115 mutex_unlock(&dev->lock);
3116
3117 return 0;
3118
3119 err:
3120 return retval;
3121 }
3122
3123 /*
3124 * em28xx_usb_disconnect()
3125 * called when the device gets diconencted
3126 * video device will be unregistered on v4l2_close in case it is still open
3127 */
3128 static void em28xx_usb_disconnect(struct usb_interface *interface)
3129 {
3130 struct em28xx *dev;
3131
3132 dev = usb_get_intfdata(interface);
3133 usb_set_intfdata(interface, NULL);
3134
3135 if (!dev)
3136 return;
3137
3138 em28xx_info("disconnecting %s\n", dev->vdev->name);
3139
3140 flush_request_modules(dev);
3141
3142 /* wait until all current v4l2 io is finished then deallocate
3143 resources */
3144 mutex_lock(&dev->lock);
3145
3146 wake_up_interruptible_all(&dev->open);
3147
3148 v4l2_device_disconnect(&dev->v4l2_dev);
3149
3150 if (dev->users) {
3151 em28xx_warn
3152 ("device %s is open! Deregistration and memory "
3153 "deallocation are deferred on close.\n",
3154 video_device_node_name(dev->vdev));
3155
3156 dev->state |= DEV_MISCONFIGURED;
3157 em28xx_uninit_isoc(dev);
3158 dev->state |= DEV_DISCONNECTED;
3159 wake_up_interruptible(&dev->wait_frame);
3160 wake_up_interruptible(&dev->wait_stream);
3161 } else {
3162 dev->state |= DEV_DISCONNECTED;
3163 em28xx_release_resources(dev);
3164 }
3165
3166 em28xx_close_extension(dev);
3167
3168 mutex_unlock(&dev->lock);
3169
3170 if (!dev->users) {
3171 kfree(dev->alt_max_pkt_size);
3172 kfree(dev);
3173 }
3174 }
3175
3176 static struct usb_driver em28xx_usb_driver = {
3177 .name = "em28xx",
3178 .probe = em28xx_usb_probe,
3179 .disconnect = em28xx_usb_disconnect,
3180 .id_table = em28xx_id_table,
3181 };
3182
3183 static int __init em28xx_module_init(void)
3184 {
3185 int result;
3186
3187 /* register this driver with the USB subsystem */
3188 result = usb_register(&em28xx_usb_driver);
3189 if (result)
3190 em28xx_err(DRIVER_NAME
3191 " usb_register failed. Error number %d.\n", result);
3192
3193 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
3194
3195 return result;
3196 }
3197
3198 static void __exit em28xx_module_exit(void)
3199 {
3200 /* deregister this driver with the USB subsystem */
3201 usb_deregister(&em28xx_usb_driver);
3202 }
3203
3204 module_init(em28xx_module_init);
3205 module_exit(em28xx_module_exit);
Linux kernel - Deliverables
This page took 0.094565 seconds and 6 git commands to generate.