drivers/media/video/gspca/sq905c.c

   1 /*
   2  * SQ905C subdriver
   3  *
   4  * Copyright (C) 2009 Theodore Kilgore
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  19  */
  20
  21 /*
  22  *
  23  * This driver uses work done in
  24  * libgphoto2/camlibs/digigr8, Copyright (C) Theodore Kilgore.
  25  *
  26  * This driver has also used as a base the sq905c driver
  27  * and may contain code fragments from it.
  28  */
  29
  30 #define MODULE_NAME "sq905c"
  31
  32 #include <linux/workqueue.h>
  33 #include "gspca.h"
  34
  35 MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>");
  36 MODULE_DESCRIPTION("GSPCA/SQ905C USB Camera Driver");
  37 MODULE_LICENSE("GPL");
  38
  39 /* Default timeouts, in ms */
  40 #define SQ905C_CMD_TIMEOUT 500
  41 #define SQ905C_DATA_TIMEOUT 1000
  42
  43 /* Maximum transfer size to use. */
  44 #define SQ905C_MAX_TRANSFER 0x8000
  45
  46 #define FRAME_HEADER_LEN 0x50
  47
  48 /* Commands. These go in the "value" slot. */
  49 #define SQ905C_CLEAR   0xa0             /* clear everything */
  50 #define SQ905C_CAPTURE_LOW 0xa040       /* Starts capture at 160x120 */
  51 #define SQ905C_CAPTURE_MED 0x1440       /* Starts capture at 320x240 */
  52 #define SQ905C_CAPTURE_HI 0x2840        /* Starts capture at 320x240 */
  53
  54 /* For capture, this must go in the "index" slot. */
  55 #define SQ905C_CAPTURE_INDEX 0x110f
  56
  57 /* Structure to hold all of our device specific stuff */
  58 struct sd {
  59         struct gspca_dev gspca_dev;     /* !! must be the first item */
  60         const struct v4l2_pix_format *cap_mode;
  61         /* Driver stuff */
  62         struct work_struct work_struct;
  63         struct workqueue_struct *work_thread;
  64 };
  65
  66 /*
  67  * Most of these cameras will do 640x480 and 320x240. 160x120 works
  68  * in theory but gives very poor output. Therefore, not supported.
  69  * The 0x2770:0x9050 cameras have max resolution of 320x240.
  70  */
  71 static struct v4l2_pix_format sq905c_mode[] = {
  72         { 320, 240, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
  73                 .bytesperline = 320,
  74                 .sizeimage = 320 * 240,
  75                 .colorspace = V4L2_COLORSPACE_SRGB,
  76                 .priv = 0},
  77         { 640, 480, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
  78                 .bytesperline = 640,
  79                 .sizeimage = 640 * 480,
  80                 .colorspace = V4L2_COLORSPACE_SRGB,
  81                 .priv = 0}
  82 };
  83
  84 /* Send a command to the camera. */
  85 static int sq905c_command(struct gspca_dev *gspca_dev, u16 command, u16 index)
  86 {
  87         int ret;
  88
  89         ret = usb_control_msg(gspca_dev->dev,
  90                               usb_sndctrlpipe(gspca_dev->dev, 0),
  91                               USB_REQ_SYNCH_FRAME,                /* request */
  92                               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  93                               command, index, NULL, 0,
  94                               SQ905C_CMD_TIMEOUT);
  95         if (ret < 0) {
  96                 PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)",
  97                         __func__, ret);
  98                 return ret;
  99         }
 100
 101         return 0;
 102 }
 103
 104 /* This function is called as a workqueue function and runs whenever the camera
 105  * is streaming data. Because it is a workqueue function it is allowed to sleep
 106  * so we can use synchronous USB calls. To avoid possible collisions with other
 107  * threads attempting to use the camera's USB interface the gspca usb_lock is
 108  * used when performing the one USB control operation inside the workqueue,
 109  * which tells the camera to close the stream. In practice the only thing
 110  * which needs to be protected against is the usb_set_interface call that
 111  * gspca makes during stream_off. Otherwise the camera doesn't provide any
 112  * controls that the user could try to change.
 113  */
 114 static void sq905c_dostream(struct work_struct *work)
 115 {
 116         struct sd *dev = container_of(work, struct sd, work_struct);
 117         struct gspca_dev *gspca_dev = &dev->gspca_dev;
 118         struct gspca_frame *frame;
 119         int bytes_left; /* bytes remaining in current frame. */
 120         int data_len;   /* size to use for the next read. */
 121         int act_len;
 122         int packet_type;
 123         int ret;
 124         u8 *buffer;
 125
 126         buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL | GFP_DMA);
 127         if (!buffer) {
 128                 PDEBUG(D_ERR, "Couldn't allocate USB buffer");
 129                 goto quit_stream;
 130         }
 131
 132         while (gspca_dev->present && gspca_dev->streaming) {
 133                 /* Request the header, which tells the size to download */
 134                 ret = usb_bulk_msg(gspca_dev->dev,
 135                                 usb_rcvbulkpipe(gspca_dev->dev, 0x81),
 136                                 buffer, FRAME_HEADER_LEN, &act_len,
 137                                 SQ905C_DATA_TIMEOUT);
 138                 PDEBUG(D_STREAM,
 139                         "Got %d bytes out of %d for header",
 140                         act_len, FRAME_HEADER_LEN);
 141                 if (ret < 0 || act_len < FRAME_HEADER_LEN)
 142                         goto quit_stream;
 143                 /* size is read from 4 bytes starting 0x40, little endian */
 144                 bytes_left = buffer[0x40]|(buffer[0x41]<<8)|(buffer[0x42]<<16)
 145                                         |(buffer[0x43]<<24);
 146                 PDEBUG(D_STREAM, "bytes_left = 0x%x", bytes_left);
 147                 /* We keep the header. It has other information, too. */
 148                 packet_type = FIRST_PACKET;
 149                 frame = gspca_get_i_frame(gspca_dev);
 150                 if (frame)
 151                         gspca_frame_add(gspca_dev, packet_type,
 152                                 frame, buffer, FRAME_HEADER_LEN);
 153                 while (bytes_left > 0 && gspca_dev->present) {
 154                         data_len = bytes_left > SQ905C_MAX_TRANSFER ?
 155                                 SQ905C_MAX_TRANSFER : bytes_left;
 156                         ret = usb_bulk_msg(gspca_dev->dev,
 157                                 usb_rcvbulkpipe(gspca_dev->dev, 0x81),
 158                                 buffer, data_len, &act_len,
 159                                 SQ905C_DATA_TIMEOUT);
 160                         if (ret < 0 || act_len < data_len)
 161                                 goto quit_stream;
 162                         PDEBUG(D_STREAM,
 163                                 "Got %d bytes out of %d for frame",
 164                                 data_len, bytes_left);
 165                         bytes_left -= data_len;
 166                         if (bytes_left == 0)
 167                                 packet_type = LAST_PACKET;
 168                         else
 169                                 packet_type = INTER_PACKET;
 170                         if (frame)
 171                                 gspca_frame_add(gspca_dev, packet_type,
 172                                                 frame, buffer, data_len);
 173                 }
 174         }
 175 quit_stream:
 176         if (gspca_dev->present) {
 177                 mutex_lock(&gspca_dev->usb_lock);
 178                 sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
 179                 mutex_unlock(&gspca_dev->usb_lock);
 180         }
 181         kfree(buffer);
 182 }
 183
 184 /* This function is called at probe time just before sd_init */
 185 static int sd_config(struct gspca_dev *gspca_dev,
 186                 const struct usb_device_id *id)
 187 {
 188         struct cam *cam = &gspca_dev->cam;
 189         struct sd *dev = (struct sd *) gspca_dev;
 190
 191         PDEBUG(D_PROBE,
 192                 "SQ9050 camera detected"
 193                 " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
 194         cam->cam_mode = sq905c_mode;
 195         cam->nmodes = 2;
 196         if (id->idProduct == 0x9050)
 197                 cam->nmodes = 1;
 198         /* We don't use the buffer gspca allocates so make it small. */
 199         cam->bulk_size = 32;
 200         cam->bulk = 1;
 201         INIT_WORK(&dev->work_struct, sq905c_dostream);
 202         return 0;
 203 }
 204
 205 /* called on streamoff with alt==0 and on disconnect */
 206 /* the usb_lock is held at entry - restore on exit */
 207 static void sd_stop0(struct gspca_dev *gspca_dev)
 208 {
 209         struct sd *dev = (struct sd *) gspca_dev;
 210
 211         /* wait for the work queue to terminate */
 212         mutex_unlock(&gspca_dev->usb_lock);
 213         /* This waits for sq905c_dostream to finish */
 214         destroy_workqueue(dev->work_thread);
 215         dev->work_thread = NULL;
 216         mutex_lock(&gspca_dev->usb_lock);
 217 }
 218
 219 /* this function is called at probe and resume time */
 220 static int sd_init(struct gspca_dev *gspca_dev)
 221 {
 222         int ret;
 223
 224         /* connect to the camera and reset it. */
 225         ret = sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
 226         return ret;
 227 }
 228
 229 /* Set up for getting frames. */
 230 static int sd_start(struct gspca_dev *gspca_dev)
 231 {
 232         struct sd *dev = (struct sd *) gspca_dev;
 233         int ret;
 234
 235         dev->cap_mode = gspca_dev->cam.cam_mode;
 236         /* "Open the shutter" and set size, to start capture */
 237         switch (gspca_dev->width) {
 238         case 640:
 239                 PDEBUG(D_STREAM, "Start streaming at high resolution");
 240                 dev->cap_mode++;
 241                 ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_HI,
 242                                                 SQ905C_CAPTURE_INDEX);
 243                 break;
 244         default: /* 320 */
 245         PDEBUG(D_STREAM, "Start streaming at medium resolution");
 246                 ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_MED,
 247                                                 SQ905C_CAPTURE_INDEX);
 248         }
 249
 250         if (ret < 0) {
 251                 PDEBUG(D_ERR, "Start streaming command failed");
 252                 return ret;
 253         }
 254         /* Start the workqueue function to do the streaming */
 255         dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
 256         queue_work(dev->work_thread, &dev->work_struct);
 257
 258         return 0;
 259 }
 260
 261 /* Table of supported USB devices */
 262 static const __devinitdata struct usb_device_id device_table[] = {
 263         {USB_DEVICE(0x2770, 0x905c)},
 264         {USB_DEVICE(0x2770, 0x9050)},
 265         {USB_DEVICE(0x2770, 0x913d)},
 266         {}
 267 };
 268
 269 MODULE_DEVICE_TABLE(usb, device_table);
 270
 271 /* sub-driver description */
 272 static const struct sd_desc sd_desc = {
 273         .name   = MODULE_NAME,
 274         .config = sd_config,
 275         .init   = sd_init,
 276         .start  = sd_start,
 277         .stop0  = sd_stop0,
 278 };
 279
 280 /* -- device connect -- */
 281 static int sd_probe(struct usb_interface *intf,
 282                 const struct usb_device_id *id)
 283 {
 284         return gspca_dev_probe(intf, id,
 285                         &sd_desc,
 286                         sizeof(struct sd),
 287                         THIS_MODULE);
 288 }
 289
 290 static struct usb_driver sd_driver = {
 291         .name       = MODULE_NAME,
 292         .id_table   = device_table,
 293         .probe      = sd_probe,
 294         .disconnect = gspca_disconnect,
 295 #ifdef CONFIG_PM
 296         .suspend = gspca_suspend,
 297         .resume  = gspca_resume,
 298 #endif
 299 };
 300
 301 /* -- module insert / remove -- */
 302 static int __init sd_mod_init(void)
 303 {
 304         int ret;
 305
 306         ret = usb_register(&sd_driver);
 307         if (ret < 0)
 308                 return ret;
 309         PDEBUG(D_PROBE, "registered");
 310         return 0;
 311 }
 312
 313 static void __exit sd_mod_exit(void)
 314 {
 315         usb_deregister(&sd_driver);
 316         PDEBUG(D_PROBE, "deregistered");
 317 }
 318
 319 module_init(sd_mod_init);
 320 module_exit(sd_mod_exit);